Merge branch 'linus' into x86/pci-ioapic-boot-irq-quirks

Conflicts:

	drivers/pci/quirks.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 1071 insertions, 0 deletions

diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
new file mode 100644
index 0000000..702df45
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -0,0 +1,1071 @@
+/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*-
+ *
+ * Copyright (C) The Weather Channel, Inc.  2002.
+ * Copyright (C) 2004 Nicolai Haehnle.
+ * All Rights Reserved.
+ *
+ * The Weather Channel (TM) funded Tungsten Graphics to develop the
+ * initial release of the Radeon 8500 driver under the XFree86 license.
+ * This notice must be preserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Nicolai Haehnle <prefect_@gmx.net>
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_drm.h"
+#include "radeon_drv.h"
+#include "r300_reg.h"
+
+#define R300_SIMULTANEOUS_CLIPRECTS		4
+
+/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects
+ */
+static const int r300_cliprect_cntl[4] = {
+	0xAAAA,
+	0xEEEE,
+	0xFEFE,
+	0xFFFE
+};
+
+/**
+ * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command
+ * buffer, starting with index n.
+ */
+static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
+			       drm_radeon_kcmd_buffer_t *cmdbuf, int n)
+{
+	struct drm_clip_rect box;
+	int nr;
+	int i;
+	RING_LOCALS;
+
+	nr = cmdbuf->nbox - n;
+	if (nr > R300_SIMULTANEOUS_CLIPRECTS)
+		nr = R300_SIMULTANEOUS_CLIPRECTS;
+
+	DRM_DEBUG("%i cliprects\n", nr);
+
+	if (nr) {
+		BEGIN_RING(6 + nr * 2);
+		OUT_RING(CP_PACKET0(R300_RE_CLIPRECT_TL_0, nr * 2 - 1));
+
+		for (i = 0; i < nr; ++i) {
+			if (DRM_COPY_FROM_USER_UNCHECKED
+			    (&box, &cmdbuf->boxes[n + i], sizeof(box))) {
+				DRM_ERROR("copy cliprect faulted\n");
+				return -EFAULT;
+			}
+
+			if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
+				box.x1 = (box.x1) &
+					R300_CLIPRECT_MASK;
+				box.y1 = (box.y1) &
+					R300_CLIPRECT_MASK;
+				box.x2 = (box.x2) &
+					R300_CLIPRECT_MASK;
+				box.y2 = (box.y2) &
+					R300_CLIPRECT_MASK;
+			} else {
+				box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) &
+					R300_CLIPRECT_MASK;
+				box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) &
+					R300_CLIPRECT_MASK;
+				box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) &
+					R300_CLIPRECT_MASK;
+				box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) &
+					R300_CLIPRECT_MASK;
+
+			}
+			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
+				 (box.y1 << R300_CLIPRECT_Y_SHIFT));
+			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
+				 (box.y2 << R300_CLIPRECT_Y_SHIFT));
+
+		}
+
+		OUT_RING_REG(R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr - 1]);
+
+		/* TODO/SECURITY: Force scissors to a safe value, otherwise the
+		 * client might be able to trample over memory.
+		 * The impact should be very limited, but I'd rather be safe than
+		 * sorry.
+		 */
+		OUT_RING(CP_PACKET0(R300_RE_SCISSORS_TL, 1));
+		OUT_RING(0);
+		OUT_RING(R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK);
+		ADVANCE_RING();
+	} else {
+		/* Why we allow zero cliprect rendering:
+		 * There are some commands in a command buffer that must be submitted
+		 * even when there are no cliprects, e.g. DMA buffer discard
+		 * or state setting (though state setting could be avoided by
+		 * simulating a loss of context).
+		 *
+		 * Now since the cmdbuf interface is so chaotic right now (and is
+		 * bound to remain that way for a bit until things settle down),
+		 * it is basically impossible to filter out the commands that are
+		 * necessary and those that aren't.
+		 *
+		 * So I choose the safe way and don't do any filtering at all;
+		 * instead, I simply set up the engine so that all rendering
+		 * can't produce any fragments.
+		 */
+		BEGIN_RING(2);
+		OUT_RING_REG(R300_RE_CLIPRECT_CNTL, 0);
+		ADVANCE_RING();
+	}
+
+	return 0;
+}
+
+static u8 r300_reg_flags[0x10000 >> 2];
+
+void r300_init_reg_flags(struct drm_device *dev)
+{
+	int i;
+	drm_radeon_private_t *dev_priv = dev->dev_private;
+
+	memset(r300_reg_flags, 0, 0x10000 >> 2);
+#define ADD_RANGE_MARK(reg, count,mark) \
+		for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\
+			r300_reg_flags[i]|=(mark);
+
+#define MARK_SAFE		1
+#define MARK_CHECK_OFFSET	2
+
+#define ADD_RANGE(reg, count)	ADD_RANGE_MARK(reg, count, MARK_SAFE)
+
+	/* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */
+	ADD_RANGE(R300_SE_VPORT_XSCALE, 6);
+	ADD_RANGE(R300_VAP_CNTL, 1);
+	ADD_RANGE(R300_SE_VTE_CNTL, 2);
+	ADD_RANGE(0x2134, 2);
+	ADD_RANGE(R300_VAP_CNTL_STATUS, 1);
+	ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2);
+	ADD_RANGE(0x21DC, 1);
+	ADD_RANGE(R300_VAP_UNKNOWN_221C, 1);
+	ADD_RANGE(R300_VAP_CLIP_X_0, 4);
+	ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1);
+	ADD_RANGE(R300_VAP_UNKNOWN_2288, 1);
+	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
+	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
+	ADD_RANGE(R300_GB_ENABLE, 1);
+	ADD_RANGE(R300_GB_MSPOS0, 5);
+	ADD_RANGE(R300_TX_CNTL, 1);
+	ADD_RANGE(R300_TX_ENABLE, 1);
+	ADD_RANGE(0x4200, 4);
+	ADD_RANGE(0x4214, 1);
+	ADD_RANGE(R300_RE_POINTSIZE, 1);
+	ADD_RANGE(0x4230, 3);
+	ADD_RANGE(R300_RE_LINE_CNT, 1);
+	ADD_RANGE(R300_RE_UNK4238, 1);
+	ADD_RANGE(0x4260, 3);
+	ADD_RANGE(R300_RE_SHADE, 4);
+	ADD_RANGE(R300_RE_POLYGON_MODE, 5);
+	ADD_RANGE(R300_RE_ZBIAS_CNTL, 1);
+	ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4);
+	ADD_RANGE(R300_RE_OCCLUSION_CNTL, 1);
+	ADD_RANGE(R300_RE_CULL_CNTL, 1);
+	ADD_RANGE(0x42C0, 2);
+	ADD_RANGE(R300_RS_CNTL_0, 2);
+
+	ADD_RANGE(R300_SC_HYPERZ, 2);
+	ADD_RANGE(0x43E8, 1);
+
+	ADD_RANGE(0x46A4, 5);
+
+	ADD_RANGE(R300_RE_FOG_STATE, 1);
+	ADD_RANGE(R300_FOG_COLOR_R, 3);
+	ADD_RANGE(R300_PP_ALPHA_TEST, 2);
+	ADD_RANGE(0x4BD8, 1);
+	ADD_RANGE(R300_PFS_PARAM_0_X, 64);
+	ADD_RANGE(0x4E00, 1);
+	ADD_RANGE(R300_RB3D_CBLEND, 2);
+	ADD_RANGE(R300_RB3D_COLORMASK, 1);
+	ADD_RANGE(R300_RB3D_BLEND_COLOR, 3);
+	ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET);	/* check offset */
+	ADD_RANGE(R300_RB3D_COLORPITCH0, 1);
+	ADD_RANGE(0x4E50, 9);
+	ADD_RANGE(0x4E88, 1);
+	ADD_RANGE(0x4EA0, 2);
+	ADD_RANGE(R300_ZB_CNTL, 3);
+	ADD_RANGE(R300_ZB_FORMAT, 4);
+	ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
+	ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+	ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+	ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
+
+	ADD_RANGE(R300_TX_FILTER_0, 16);
+	ADD_RANGE(R300_TX_FILTER1_0, 16);
+	ADD_RANGE(R300_TX_SIZE_0, 16);
+	ADD_RANGE(R300_TX_FORMAT_0, 16);
+	ADD_RANGE(R300_TX_PITCH_0, 16);
+	/* Texture offset is dangerous and needs more checking */
+	ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET);
+	ADD_RANGE(R300_TX_CHROMA_KEY_0, 16);
+	ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
+
+	/* Sporadic registers used as primitives are emitted */
+	ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
+	ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
+	ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
+	ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
+
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
+		ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+		ADD_RANGE(R500_US_CONFIG, 2);
+		ADD_RANGE(R500_US_CODE_ADDR, 3);
+		ADD_RANGE(R500_US_FC_CTRL, 1);
+		ADD_RANGE(R500_RS_IP_0, 16);
+		ADD_RANGE(R500_RS_INST_0, 16);
+		ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+		ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+		ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+	} else {
+		ADD_RANGE(R300_PFS_CNTL_0, 3);
+		ADD_RANGE(R300_PFS_NODE_0, 4);
+		ADD_RANGE(R300_PFS_TEXI_0, 64);
+		ADD_RANGE(R300_PFS_INSTR0_0, 64);
+		ADD_RANGE(R300_PFS_INSTR1_0, 64);
+		ADD_RANGE(R300_PFS_INSTR2_0, 64);
+		ADD_RANGE(R300_PFS_INSTR3_0, 64);
+		ADD_RANGE(R300_RS_INTERP_0, 8);
+		ADD_RANGE(R300_RS_ROUTE_0, 8);
+
+	}
+}
+
+static __inline__ int r300_check_range(unsigned reg, int count)
+{
+	int i;
+	if (reg & ~0xffff)
+		return -1;
+	for (i = (reg >> 2); i < (reg >> 2) + count; i++)
+		if (r300_reg_flags[i] != MARK_SAFE)
+			return 1;
+	return 0;
+}
+
+static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t *
+							  dev_priv,
+							  drm_radeon_kcmd_buffer_t
+							  * cmdbuf,
+							  drm_r300_cmd_header_t
+							  header)
+{
+	int reg;
+	int sz;
+	int i;
+	int values[64];
+	RING_LOCALS;
+
+	sz = header.packet0.count;
+	reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+
+	if ((sz > 64) || (sz < 0)) {
+		DRM_ERROR
+		    ("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n",
+		     reg, sz);
+		return -EINVAL;
+	}
+	for (i = 0; i < sz; i++) {
+		values[i] = ((int *)cmdbuf->buf)[i];
+		switch (r300_reg_flags[(reg >> 2) + i]) {
+		case MARK_SAFE:
+			break;
+		case MARK_CHECK_OFFSET:
+			if (!radeon_check_offset(dev_priv, (u32) values[i])) {
+				DRM_ERROR
+				    ("Offset failed range check (reg=%04x sz=%d)\n",
+				     reg, sz);
+				return -EINVAL;
+			}
+			break;
+		default:
+			DRM_ERROR("Register %04x failed check as flag=%02x\n",
+				  reg + i * 4, r300_reg_flags[(reg >> 2) + i]);
+			return -EINVAL;
+		}
+	}
+
+	BEGIN_RING(1 + sz);
+	OUT_RING(CP_PACKET0(reg, sz - 1));
+	OUT_RING_TABLE(values, sz);
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * 4;
+	cmdbuf->bufsz -= sz * 4;
+
+	return 0;
+}
+
+/**
+ * Emits a packet0 setting arbitrary registers.
+ * Called by r300_do_cp_cmdbuf.
+ *
+ * Note that checks are performed on contents and addresses of the registers
+ */
+static __inline__ int r300_emit_packet0(drm_radeon_private_t *dev_priv,
+					drm_radeon_kcmd_buffer_t *cmdbuf,
+					drm_r300_cmd_header_t header)
+{
+	int reg;
+	int sz;
+	RING_LOCALS;
+
+	sz = header.packet0.count;
+	reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+
+	if (!sz)
+		return 0;
+
+	if (sz * 4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	if (reg + sz * 4 >= 0x10000) {
+		DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg,
+			  sz);
+		return -EINVAL;
+	}
+
+	if (r300_check_range(reg, sz)) {
+		/* go and check everything */
+		return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf,
+							   header);
+	}
+	/* the rest of the data is safe to emit, whatever the values the user passed */
+
+	BEGIN_RING(1 + sz);
+	OUT_RING(CP_PACKET0(reg, sz - 1));
+	OUT_RING_TABLE((int *)cmdbuf->buf, sz);
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * 4;
+	cmdbuf->bufsz -= sz * 4;
+
+	return 0;
+}
+
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
+				    drm_radeon_kcmd_buffer_t *cmdbuf,
+				    drm_r300_cmd_header_t header)
+{
+	int sz;
+	int addr;
+	RING_LOCALS;
+
+	sz = header.vpu.count;
+	addr = (header.vpu.adrhi << 8) | header.vpu.adrlo;
+
+	if (!sz)
+		return 0;
+	if (sz * 16 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	BEGIN_RING(5 + sz * 4);
+	/* Wait for VAP to come to senses.. */
+	/* there is no need to emit it multiple times, (only once before VAP is programmed,
+	   but this optimization is for later */
+	OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
+	OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
+	OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
+	OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);
+
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * 16;
+	cmdbuf->bufsz -= sz * 16;
+
+	return 0;
+}
+
+/**
+ * Emit a clear packet from userspace.
+ * Called by r300_emit_packet3.
+ */
+static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
+				      drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+	RING_LOCALS;
+
+	if (8 * 4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	BEGIN_RING(10);
+	OUT_RING(CP_PACKET3(R200_3D_DRAW_IMMD_2, 8));
+	OUT_RING(R300_PRIM_TYPE_POINT | R300_PRIM_WALK_RING |
+		 (1 << R300_PRIM_NUM_VERTICES_SHIFT));
+	OUT_RING_TABLE((int *)cmdbuf->buf, 8);
+	ADVANCE_RING();
+
+	cmdbuf->buf += 8 * 4;
+	cmdbuf->bufsz -= 8 * 4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t *dev_priv,
+					       drm_radeon_kcmd_buffer_t *cmdbuf,
+					       u32 header)
+{
+	int count, i, k;
+#define MAX_ARRAY_PACKET  64
+	u32 payload[MAX_ARRAY_PACKET];
+	u32 narrays;
+	RING_LOCALS;
+
+	count = (header >> 16) & 0x3fff;
+
+	if ((count + 1) > MAX_ARRAY_PACKET) {
+		DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n",
+			  count);
+		return -EINVAL;
+	}
+	memset(payload, 0, MAX_ARRAY_PACKET * 4);
+	memcpy(payload, cmdbuf->buf + 4, (count + 1) * 4);
+
+	/* carefully check packet contents */
+
+	narrays = payload[0];
+	k = 0;
+	i = 1;
+	while ((k < narrays) && (i < (count + 1))) {
+		i++;		/* skip attribute field */
+		if (!radeon_check_offset(dev_priv, payload[i])) {
+			DRM_ERROR
+			    ("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
+			     k, i);
+			return -EINVAL;
+		}
+		k++;
+		i++;
+		if (k == narrays)
+			break;
+		/* have one more to process, they come in pairs */
+		if (!radeon_check_offset(dev_priv, payload[i])) {
+			DRM_ERROR
+			    ("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
+			     k, i);
+			return -EINVAL;
+		}
+		k++;
+		i++;
+	}
+	/* do the counts match what we expect ? */
+	if ((k != narrays) || (i != (count + 1))) {
+		DRM_ERROR
+		    ("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n",
+		     k, i, narrays, count + 1);
+		return -EINVAL;
+	}
+
+	/* all clear, output packet */
+
+	BEGIN_RING(count + 2);
+	OUT_RING(header);
+	OUT_RING_TABLE(payload, count + 1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count + 2) * 4;
+	cmdbuf->bufsz -= (count + 2) * 4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
+					     drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+	u32 *cmd = (u32 *) cmdbuf->buf;
+	int count, ret;
+	RING_LOCALS;
+
+	count=(cmd[0]>>16) & 0x3fff;
+
+	if (cmd[0] & 0x8000) {
+		u32 offset;
+
+		if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
+			      | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+			offset = cmd[2] << 10;
+			ret = !radeon_check_offset(dev_priv, offset);
+			if (ret) {
+				DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
+				return -EINVAL;
+			}
+		}
+
+		if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
+		    (cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+			offset = cmd[3] << 10;
+			ret = !radeon_check_offset(dev_priv, offset);
+			if (ret) {
+				DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
+				return -EINVAL;
+			}
+
+		}
+	}
+
+	BEGIN_RING(count+2);
+	OUT_RING(cmd[0]);
+	OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count+2)*4;
+	cmdbuf->bufsz -= (count+2)*4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
+					     drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+	u32 *cmd = (u32 *) cmdbuf->buf;
+	int count, ret;
+	RING_LOCALS;
+
+	count=(cmd[0]>>16) & 0x3fff;
+
+	if ((cmd[1] & 0x8000ffff) != 0x80000810) {
+		DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
+		return -EINVAL;
+	}
+	ret = !radeon_check_offset(dev_priv, cmd[2]);
+	if (ret) {
+		DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+		return -EINVAL;
+	}
+
+	BEGIN_RING(count+2);
+	OUT_RING(cmd[0]);
+	OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count+2)*4;
+	cmdbuf->bufsz -= (count+2)*4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
+					    drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+	u32 header;
+	int count;
+	RING_LOCALS;
+
+	if (4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	/* Fixme !! This simply emits a packet without much checking.
+	   We need to be smarter. */
+
+	/* obtain first word - actual packet3 header */
+	header = *(u32 *) cmdbuf->buf;
+
+	/* Is it packet 3 ? */
+	if ((header >> 30) != 0x3) {
+		DRM_ERROR("Not a packet3 header (0x%08x)\n", header);
+		return -EINVAL;
+	}
+
+	count = (header >> 16) & 0x3fff;
+
+	/* Check again now that we know how much data to expect */
+	if ((count + 2) * 4 > cmdbuf->bufsz) {
+		DRM_ERROR
+		    ("Expected packet3 of length %d but have only %d bytes left\n",
+		     (count + 2) * 4, cmdbuf->bufsz);
+		return -EINVAL;
+	}
+
+	/* Is it a packet type we know about ? */
+	switch (header & 0xff00) {
+	case RADEON_3D_LOAD_VBPNTR:	/* load vertex array pointers */
+		return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
+
+	case RADEON_CNTL_BITBLT_MULTI:
+		return r300_emit_bitblt_multi(dev_priv, cmdbuf);
+
+	case RADEON_CP_INDX_BUFFER:	/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
+		return r300_emit_indx_buffer(dev_priv, cmdbuf);
+	case RADEON_CP_3D_DRAW_IMMD_2:	/* triggers drawing using in-packet vertex data */
+	case RADEON_CP_3D_DRAW_VBUF_2:	/* triggers drawing of vertex buffers setup elsewhere */
+	case RADEON_CP_3D_DRAW_INDX_2:	/* triggers drawing using indices to vertex buffer */
+	case RADEON_WAIT_FOR_IDLE:
+	case RADEON_CP_NOP:
+		/* these packets are safe */
+		break;
+	default:
+		DRM_ERROR("Unknown packet3 header (0x%08x)\n", header);
+		return -EINVAL;
+	}
+
+	BEGIN_RING(count + 2);
+	OUT_RING(header);
+	OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count + 2) * 4;
+	cmdbuf->bufsz -= (count + 2) * 4;
+
+	return 0;
+}
+
+/**
+ * Emit a rendering packet3 from userspace.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
+					drm_radeon_kcmd_buffer_t *cmdbuf,
+					drm_r300_cmd_header_t header)
+{
+	int n;
+	int ret;
+	char *orig_buf = cmdbuf->buf;
+	int orig_bufsz = cmdbuf->bufsz;
+
+	/* This is a do-while-loop so that we run the interior at least once,
+	 * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale.
+	 */
+	n = 0;
+	do {
+		if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) {
+			ret = r300_emit_cliprects(dev_priv, cmdbuf, n);
+			if (ret)
+				return ret;
+
+			cmdbuf->buf = orig_buf;
+			cmdbuf->bufsz = orig_bufsz;
+		}
+
+		switch (header.packet3.packet) {
+		case R300_CMD_PACKET3_CLEAR:
+			DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n");
+			ret = r300_emit_clear(dev_priv, cmdbuf);
+			if (ret) {
+				DRM_ERROR("r300_emit_clear failed\n");
+				return ret;
+			}
+			break;
+
+		case R300_CMD_PACKET3_RAW:
+			DRM_DEBUG("R300_CMD_PACKET3_RAW\n");
+			ret = r300_emit_raw_packet3(dev_priv, cmdbuf);
+			if (ret) {
+				DRM_ERROR("r300_emit_raw_packet3 failed\n");
+				return ret;
+			}
+			break;
+
+		default:
+			DRM_ERROR("bad packet3 type %i at %p\n",
+				  header.packet3.packet,
+				  cmdbuf->buf - sizeof(header));
+			return -EINVAL;
+		}
+
+		n += R300_SIMULTANEOUS_CLIPRECTS;
+	} while (n < cmdbuf->nbox);
+
+	return 0;
+}
+
+/* Some of the R300 chips seem to be extremely touchy about the two registers
+ * that are configured in r300_pacify.
+ * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace
+ * sends a command buffer that contains only state setting commands and a
+ * vertex program/parameter upload sequence, this will eventually lead to a
+ * lockup, unless the sequence is bracketed by calls to r300_pacify.
+ * So we should take great care to *always* call r300_pacify before
+ * *anything* 3D related, and again afterwards. This is what the
+ * call bracket in r300_do_cp_cmdbuf is for.
+ */
+
+/**
+ * Emit the sequence to pacify R300.
+ */
+static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
+{
+	RING_LOCALS;
+
+	BEGIN_RING(6);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
+	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
+	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
+	OUT_RING(0x0);
+	ADVANCE_RING();
+}
+
+/**
+ * Called by r300_do_cp_cmdbuf to update the internal buffer age and state.
+ * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must
+ * be careful about how this function is called.
+ */
+static void r300_discard_buffer(struct drm_device * dev, struct drm_buf * buf)
+{
+	drm_radeon_private_t *dev_priv = dev->dev_private;
+	drm_radeon_buf_priv_t *buf_priv = buf->dev_private;
+
+	buf_priv->age = ++dev_priv->sarea_priv->last_dispatch;
+	buf->pending = 1;
+	buf->used = 0;
+}
+
+static void r300_cmd_wait(drm_radeon_private_t * dev_priv,
+			  drm_r300_cmd_header_t header)
+{
+	u32 wait_until;
+	RING_LOCALS;
+
+	if (!header.wait.flags)
+		return;
+
+	wait_until = 0;
+
+	switch(header.wait.flags) {
+	case R300_WAIT_2D:
+		wait_until = RADEON_WAIT_2D_IDLE;
+		break;
+	case R300_WAIT_3D:
+		wait_until = RADEON_WAIT_3D_IDLE;
+		break;
+	case R300_NEW_WAIT_2D_3D:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_3D_IDLE;
+		break;
+	case R300_NEW_WAIT_2D_2D_CLEAN:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+		break;
+	case R300_NEW_WAIT_3D_3D_CLEAN:
+		wait_until = RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+		break;
+	case R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+		wait_until |= RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+		break;
+	default:
+		return;
+	}
+
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(wait_until);
+	ADVANCE_RING();
+}
+
+static int r300_scratch(drm_radeon_private_t *dev_priv,
+			drm_radeon_kcmd_buffer_t *cmdbuf,
+			drm_r300_cmd_header_t header)
+{
+	u32 *ref_age_base;
+	u32 i, buf_idx, h_pending;
+	RING_LOCALS;
+
+	if (cmdbuf->bufsz <
+	    (sizeof(u64) + header.scratch.n_bufs * sizeof(buf_idx))) {
+		return -EINVAL;
+	}
+
+	if (header.scratch.reg >= 5) {
+		return -EINVAL;
+	}
+
+	dev_priv->scratch_ages[header.scratch.reg]++;
+
+	ref_age_base =  (u32 *)(unsigned long)*((uint64_t *)cmdbuf->buf);
+
+	cmdbuf->buf += sizeof(u64);
+	cmdbuf->bufsz -= sizeof(u64);
+
+	for (i=0; i < header.scratch.n_bufs; i++) {
+		buf_idx = *(u32 *)cmdbuf->buf;
+		buf_idx *= 2; /* 8 bytes per buf */
+
+		if (DRM_COPY_TO_USER(ref_age_base + buf_idx, &dev_priv->scratch_ages[header.scratch.reg], sizeof(u32))) {
+			return -EINVAL;
+		}
+
+		if (DRM_COPY_FROM_USER(&h_pending, ref_age_base + buf_idx + 1, sizeof(u32))) {
+			return -EINVAL;
+		}
+
+		if (h_pending == 0) {
+			return -EINVAL;
+		}
+
+		h_pending--;
+
+		if (DRM_COPY_TO_USER(ref_age_base + buf_idx + 1, &h_pending, sizeof(u32))) {
+			return -EINVAL;
+		}
+
+		cmdbuf->buf += sizeof(buf_idx);
+		cmdbuf->bufsz -= sizeof(buf_idx);
+	}
+
+	BEGIN_RING(2);
+	OUT_RING( CP_PACKET0( RADEON_SCRATCH_REG0 + header.scratch.reg * 4, 0 ) );
+	OUT_RING( dev_priv->scratch_ages[header.scratch.reg] );
+	ADVANCE_RING();
+
+	return 0;
+}
+
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+				       drm_radeon_kcmd_buffer_t *cmdbuf,
+				       drm_r300_cmd_header_t header)
+{
+	int sz;
+	int addr;
+	int type;
+	int clamp;
+	int stride;
+	RING_LOCALS;
+
+	sz = header.r500fp.count;
+	/* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+	addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+	type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+	clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+	addr |= (type << 16);
+	addr |= (clamp << 17);
+
+	stride = type ? 4 : 6;
+
+	DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+	if (!sz)
+		return 0;
+	if (sz * stride * 4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	BEGIN_RING(3 + sz * stride);
+	OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+	OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+	OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * stride * 4;
+	cmdbuf->bufsz -= sz * stride * 4;
+
+	return 0;
+}
+
+
+/**
+ * Parses and validates a user-supplied command buffer and emits appropriate
+ * commands on the DMA ring buffer.
+ * Called by the ioctl handler function radeon_cp_cmdbuf.
+ */
+int r300_do_cp_cmdbuf(struct drm_device *dev,
+		      struct drm_file *file_priv,
+		      drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+	drm_radeon_private_t *dev_priv = dev->dev_private;
+	struct drm_device_dma *dma = dev->dma;
+	struct drm_buf *buf = NULL;
+	int emit_dispatch_age = 0;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	/* See the comment above r300_emit_begin3d for why this call must be here,
+	 * and what the cleanup gotos are for. */
+	r300_pacify(dev_priv);
+
+	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
+		ret = r300_emit_cliprects(dev_priv, cmdbuf, 0);
+		if (ret)
+			goto cleanup;
+	}
+
+	while (cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) {
+		int idx;
+		drm_r300_cmd_header_t header;
+
+		header.u = *(unsigned int *)cmdbuf->buf;
+
+		cmdbuf->buf += sizeof(header);
+		cmdbuf->bufsz -= sizeof(header);
+
+		switch (header.header.cmd_type) {
+		case R300_CMD_PACKET0:
+			DRM_DEBUG("R300_CMD_PACKET0\n");
+			ret = r300_emit_packet0(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_packet0 failed\n");
+				goto cleanup;
+			}
+			break;
+
+		case R300_CMD_VPU:
+			DRM_DEBUG("R300_CMD_VPU\n");
+			ret = r300_emit_vpu(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_vpu failed\n");
+				goto cleanup;
+			}
+			break;
+
+		case R300_CMD_PACKET3:
+			DRM_DEBUG("R300_CMD_PACKET3\n");
+			ret = r300_emit_packet3(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_packet3 failed\n");
+				goto cleanup;
+			}
+			break;
+
+		case R300_CMD_END3D:
+			DRM_DEBUG("R300_CMD_END3D\n");
+			/* TODO:
+			   Ideally userspace driver should not need to issue this call,
+			   i.e. the drm driver should issue it automatically and prevent
+			   lockups.
+
+			   In practice, we do not understand why this call is needed and what
+			   it does (except for some vague guesses that it has to do with cache
+			   coherence) and so the user space driver does it.
+
+			   Once we are sure which uses prevent lockups the code could be moved
+			   into the kernel and the userspace driver will not
+			   need to use this command.
+
+			   Note that issuing this command does not hurt anything
+			   except, possibly, performance */
+			r300_pacify(dev_priv);
+			break;
+
+		case R300_CMD_CP_DELAY:
+			/* simple enough, we can do it here */
+			DRM_DEBUG("R300_CMD_CP_DELAY\n");
+			{
+				int i;
+				RING_LOCALS;
+
+				BEGIN_RING(header.delay.count);
+				for (i = 0; i < header.delay.count; i++)
+					OUT_RING(RADEON_CP_PACKET2);
+				ADVANCE_RING();
+			}
+			break;
+
+		case R300_CMD_DMA_DISCARD:
+			DRM_DEBUG("RADEON_CMD_DMA_DISCARD\n");
+			idx = header.dma.buf_idx;
+			if (idx < 0 || idx >= dma->buf_count) {
+				DRM_ERROR("buffer index %d (of %d max)\n",
+					  idx, dma->buf_count - 1);
+				ret = -EINVAL;
+				goto cleanup;
+			}
+
+			buf = dma->buflist[idx];
+			if (buf->file_priv != file_priv || buf->pending) {
+				DRM_ERROR("bad buffer %p %p %d\n",
+					  buf->file_priv, file_priv,
+					  buf->pending);
+				ret = -EINVAL;
+				goto cleanup;
+			}
+
+			emit_dispatch_age = 1;
+			r300_discard_buffer(dev, buf);
+			break;
+
+		case R300_CMD_WAIT:
+			DRM_DEBUG("R300_CMD_WAIT\n");
+			r300_cmd_wait(dev_priv, header);
+			break;
+
+		case R300_CMD_SCRATCH:
+			DRM_DEBUG("R300_CMD_SCRATCH\n");
+			ret = r300_scratch(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_scratch failed\n");
+				goto cleanup;
+			}
+			break;
+
+		case R300_CMD_R500FP:
+			if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+				DRM_ERROR("Calling r500 command on r300 card\n");
+				ret = -EINVAL;
+				goto cleanup;
+			}
+			DRM_DEBUG("R300_CMD_R500FP\n");
+			ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_r500fp failed\n");
+				goto cleanup;
+			}
+			break;
+		default:
+			DRM_ERROR("bad cmd_type %i at %p\n",
+				  header.header.cmd_type,
+				  cmdbuf->buf - sizeof(header));
+			ret = -EINVAL;
+			goto cleanup;
+		}
+	}
+
+	DRM_DEBUG("END\n");
+
+      cleanup:
+	r300_pacify(dev_priv);
+
+	/* We emit the vertex buffer age here, outside the pacifier "brackets"
+	 * for two reasons:
+	 *  (1) This may coalesce multiple age emissions into a single one and
+	 *  (2) more importantly, some chips lock up hard when scratch registers
+	 *      are written inside the pacifier bracket.
+	 */
+	if (emit_dispatch_age) {
+		RING_LOCALS;
+
+		/* Emit the vertex buffer age */
+		BEGIN_RING(2);
+		RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch);
+		ADVANCE_RING();
+	}
+
+	COMMIT_RING();
+
+	return ret;
+}