diff options
author | Tomi Valkeinen <tomi.valkeinen@ti.com> | 2014-04-02 11:37:06 +0300 |
---|---|---|
committer | Tomi Valkeinen <tomi.valkeinen@ti.com> | 2014-04-14 12:34:14 +0300 |
commit | 2ec8e3787ae6957f738bb133e755213b9d7c066e (patch) | |
tree | 47ec00c3ca196eeea817c8eab277f1952dbd973b /drivers/gpu/drm/omapdrm | |
parent | c9eaa447e77efe77b7fa4c953bd62de8297fd6c5 (diff) | |
download | op-kernel-dev-2ec8e3787ae6957f738bb133e755213b9d7c066e.zip op-kernel-dev-2ec8e3787ae6957f738bb133e755213b9d7c066e.tar.gz |
drm/omap: fix output enable/disable sequence
At the moment it's quite easy to get the following errors when the HDMI
output is enabled or disabled:
[drm:omap_crtc_error_irq] *ERROR* tv: errors: 00008000
The reason for the errors is that the omapdrm driver doesn't properly
handle the sync-lost irqs that happen when enabling the DIGIT crtc,
which is used for HDMI and analog TV. The driver does disable the
sync-lost irq properly, but it fails to wait until the output has been
fully enabled (i.e. the first vsync), so the sync-lost errors are still
seen occasionally.
This patch makes the omapdrm act the same way as the omapfb does:
- When enabling a display, we'll wait for the first vsync.
- When disabling a display, we'll wait for framedone if available, or
odd and even vsyncs.
These changes make sure the output is fully enabled or disabled at the
end of the function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Sanjay Singh Rawat <sanjay.rawat@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Diffstat (limited to 'drivers/gpu/drm/omapdrm')
-rw-r--r-- | drivers/gpu/drm/omapdrm/omap_crtc.c | 46 |
1 files changed, 27 insertions, 19 deletions
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c index 355157e..0acbe62 100644 --- a/drivers/gpu/drm/omapdrm/omap_crtc.c +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -528,38 +528,46 @@ static void set_enabled(struct drm_crtc *crtc, bool enable) struct drm_device *dev = crtc->dev; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); enum omap_channel channel = omap_crtc->channel; - struct omap_irq_wait *wait = NULL; + struct omap_irq_wait *wait; + u32 framedone_irq, vsync_irq; + int ret; if (dispc_mgr_is_enabled(channel) == enable) return; - /* ignore sync-lost irqs during enable/disable */ + /* + * Digit output produces some sync lost interrupts during the first + * frame when enabling, so we need to ignore those. + */ omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); - if (dispc_mgr_get_framedone_irq(channel)) { - if (!enable) { - wait = omap_irq_wait_init(dev, - dispc_mgr_get_framedone_irq(channel), 1); - } + framedone_irq = dispc_mgr_get_framedone_irq(channel); + vsync_irq = dispc_mgr_get_vsync_irq(channel); + + if (enable) { + wait = omap_irq_wait_init(dev, vsync_irq, 1); } else { /* - * When we disable digit output, we need to wait until fields - * are done. Otherwise the DSS is still working, and turning - * off the clocks prevents DSS from going to OFF mode. And when - * enabling, we need to wait for the extra sync losts + * When we disable the digit output, we need to wait for + * FRAMEDONE to know that DISPC has finished with the output. + * + * OMAP2/3 does not have FRAMEDONE irq for digit output, and in + * that case we need to use vsync interrupt, and wait for both + * even and odd frames. */ - wait = omap_irq_wait_init(dev, - dispc_mgr_get_vsync_irq(channel), 2); + + if (framedone_irq) + wait = omap_irq_wait_init(dev, framedone_irq, 1); + else + wait = omap_irq_wait_init(dev, vsync_irq, 2); } dispc_mgr_enable(channel, enable); - if (wait) { - int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); - if (ret) { - dev_err(dev->dev, "%s: timeout waiting for %s\n", - omap_crtc->name, enable ? "enable" : "disable"); - } + ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); } omap_irq_register(crtc->dev, &omap_crtc->error_irq); |