drm/i915: Add support for DRRS to switch RR

This patch computes and stored 2nd M/N/TU for switching to different
refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle
between alternate refresh rates programmed in 2nd M/N/TU registers.

v2: Daniel's review comments
Computing M2/N2 in compute_config and storing it in crtc_config

v3: Modified reference to edp_downclock and edp_downclock_avail based on the
changes made to move them from dev_private to intel_panel.

v4: Modified references to is_drrs_supported based on the changes made to
rename it to drrs_support.

v5: Jani's review comments
Removed superfluous return statements. Changed support for Gen 7 and above.
Corrected indentation. Re-structured the code which finds crtc and connector
from encoder. Changed some logs to be less verbose.

v6: Modifying i915_drrs to include only intel connector as intel_dp can be
derived from intel connector when required.

v7: As per internal review comments, acquiring mutex just before accessing
drrs RR. As per Chris's review comments, added documentation about the use
of locking in the function.

v8: Incorporated Jani's review comments.
Removed reference to edp_downclock.

v9: Jani's review comments. Modified comment in set_drrs. Changed index to
type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting
registers fo DRRS.

Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

4 files changed, 121 insertions, 1 deletions

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d0d8e6d..761fc53 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -633,6 +633,10 @@ struct i915_fbc {
 	} no_fbc_reason;
 };
 
+struct i915_drrs {
+	struct intel_connector *connector;
+};
+
 struct i915_psr {
 	bool sink_support;
 	bool source_ok;
@@ -1324,6 +1328,7 @@ struct drm_i915_private {
 	struct timer_list hotplug_reenable_timer;
 
 	struct i915_fbc fbc;
+	struct i915_drrs drrs;
 	struct intel_opregion opregion;
 	struct intel_vbt_data vbt;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 46ea233..8f84555 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3357,6 +3357,7 @@ enum punit_power_well {
 #define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
 #define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
 #define   PIPECONF_INTERLACE_MODE_MASK		(7 << 21)
+#define   PIPECONF_EDP_RR_MODE_SWITCH		(1 << 20)
 #define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
 #define   PIPECONF_COLOR_RANGE_SELECT	(1 << 13)
 #define   PIPECONF_BPC_MASK	(0x7 << 5)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 517a8cc..b50b170 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -737,6 +737,20 @@ intel_dp_set_clock(struct intel_encoder *encoder,
 	}
 }
 
+static void
+intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum transcoder transcoder = crtc->config.cpu_transcoder;
+
+	I915_WRITE(PIPE_DATA_M2(transcoder),
+		TU_SIZE(m_n->tu) | m_n->gmch_m);
+	I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
+	I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
+	I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
+}
+
 bool
 intel_dp_compute_config(struct intel_encoder *encoder,
 			struct intel_crtc_config *pipe_config)
@@ -841,6 +855,14 @@ found:
 			       pipe_config->port_clock,
 			       &pipe_config->dp_m_n);
 
+	if (intel_connector->panel.downclock_mode != NULL &&
+		intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) {
+			intel_link_compute_m_n(bpp, lane_count,
+				intel_connector->panel.downclock_mode->clock,
+				pipe_config->port_clock,
+				&pipe_config->dp_m2_n2);
+	}
+
 	intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
 
 	return true;
@@ -3632,6 +3654,90 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 		      I915_READ(pp_div_reg));
 }
 
+void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *encoder;
+	struct intel_dp *intel_dp = NULL;
+	struct intel_crtc_config *config = NULL;
+	struct intel_crtc *intel_crtc = NULL;
+	struct intel_connector *intel_connector = dev_priv->drrs.connector;
+	u32 reg, val;
+	enum edp_drrs_refresh_rate_type index = DRRS_HIGH_RR;
+
+	if (refresh_rate <= 0) {
+		DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
+		return;
+	}
+
+	if (intel_connector == NULL) {
+		DRM_DEBUG_KMS("DRRS supported for eDP only.\n");
+		return;
+	}
+
+	if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) {
+		DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n");
+		return;
+	}
+
+	encoder = intel_attached_encoder(&intel_connector->base);
+	intel_dp = enc_to_intel_dp(&encoder->base);
+	intel_crtc = encoder->new_crtc;
+
+	if (!intel_crtc) {
+		DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
+		return;
+	}
+
+	config = &intel_crtc->config;
+
+	if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) {
+		DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
+		return;
+	}
+
+	if (intel_connector->panel.downclock_mode->vrefresh == refresh_rate)
+		index = DRRS_LOW_RR;
+
+	if (index == intel_dp->drrs_state.refresh_rate_type) {
+		DRM_DEBUG_KMS(
+			"DRRS requested for previously set RR...ignoring\n");
+		return;
+	}
+
+	if (!intel_crtc->active) {
+		DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
+		return;
+	}
+
+	if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) {
+		reg = PIPECONF(intel_crtc->config.cpu_transcoder);
+		val = I915_READ(reg);
+		if (index > DRRS_HIGH_RR) {
+			val |= PIPECONF_EDP_RR_MODE_SWITCH;
+			intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2);
+		} else {
+			val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
+		}
+		I915_WRITE(reg, val);
+	}
+
+	/*
+	 * mutex taken to ensure that there is no race between differnt
+	 * drrs calls trying to update refresh rate. This scenario may occur
+	 * in future when idleness detection based DRRS in kernel and
+	 * possible calls from user space to set differnt RR are made.
+	 */
+
+	mutex_lock(&intel_dp->drrs_state.mutex);
+
+	intel_dp->drrs_state.refresh_rate_type = index;
+
+	mutex_unlock(&intel_dp->drrs_state.mutex);
+
+	DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
+}
+
 static struct drm_display_mode *
 intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
 			struct intel_connector *intel_connector,
@@ -3661,6 +3767,10 @@ intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
 		return NULL;
 	}
 
+	dev_priv->drrs.connector = intel_connector;
+
+	mutex_init(&intel_dp->drrs_state.mutex);
+
 	intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
 
 	intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 41038d9..c551472 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -305,6 +305,9 @@ struct intel_crtc_config {
 	int pipe_bpp;
 	struct intel_link_m_n dp_m_n;
 
+	/* m2_n2 for eDP downclock */
+	struct intel_link_m_n dp_m2_n2;
+
 	/*
 	 * Frequence the dpll for the port should run at. Differs from the
 	 * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
@@ -537,6 +540,7 @@ struct intel_dp {
 	struct {
 		enum drrs_support_type type;
 		enum edp_drrs_refresh_rate_type refresh_rate_type;
+		struct mutex mutex;
 	} drrs_state;
 
 };
@@ -792,7 +796,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
 void intel_edp_psr_enable(struct intel_dp *intel_dp);
 void intel_edp_psr_disable(struct intel_dp *intel_dp);
 void intel_edp_psr_update(struct drm_device *dev);
-
+void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate);
 
 /* intel_dsi.c */
 bool intel_dsi_init(struct drm_device *dev);