drm/i915: Update comment in vlv_set_rps_idle()

Ville explained that the wakelock was being acquired during set-idle in
order to flush the voltage change from the punit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102152845.32352-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

1 files changed, 12 insertions, 2 deletions

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 4b12637..ccdea53 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5004,8 +5004,18 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
 	if (dev_priv->rps.cur_freq <= val)
 		return;
 
-	/* Wake up the media well, as that takes a lot less
-	 * power than the Render well. */
+	/* The punit delays the write of the frequency and voltage until it
+	 * determines the GPU is awake. During normal usage we don't want to
+	 * waste power changing the frequency if the GPU is sleeping (rc6).
+	 * However, the GPU and driver is now idle and we do not want to delay
+	 * switching to minimum voltage (reducing power whilst idle) as we do
+	 * not expect to be woken in the near future and so must flush the
+	 * change by waking the device.
+	 *
+	 * We choose to take the media powerwell (either would do to trick the
+	 * punit into committing the voltage change) as that takes a lot less
+	 * power than the render powerwell.
+	 */
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
 	valleyview_set_rps(dev_priv, val);
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_MEDIA);