drm/i915: Unduplicate CHV pre-encoder enabling phy logic

The only difference between the DP and HDMI versions was the lane count.
Since lane_count is now set appropriately for HDMI too, get rid of the
duplication and move this to intel_dpio_phy.c

v2: Don't move comments about 2nd common lane staying alive. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-6-git-send-email-ander.conselvan.de.oliveira@intel.com

1 files changed, 2 insertions, 65 deletions

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 578da9f..daaa68d 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1744,68 +1744,8 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
 	const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
-	enum dpio_channel ch = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-	int data, i, stagger;
-	u32 val;
-
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* allow hardware to manage TX FIFO reset source */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
-	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
-	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
-
-	/* Program Tx latency optimal setting */
-	for (i = 0; i < 4; i++) {
-		/* Set the upar bit */
-		data = (i == 1) ? 0x0 : 0x1;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
-				data << DPIO_UPAR_SHIFT);
-	}
-
-	/* Data lane stagger programming */
-	if (intel_crtc->config->port_clock > 270000)
-		stagger = 0x18;
-	else if (intel_crtc->config->port_clock > 135000)
-		stagger = 0xd;
-	else if (intel_crtc->config->port_clock > 67500)
-		stagger = 0x7;
-	else if (intel_crtc->config->port_clock > 33750)
-		stagger = 0x4;
-	else
-		stagger = 0x2;
 
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
-	val |= DPIO_TX2_STAGGER_MASK(0x1f);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
-	val |= DPIO_TX2_STAGGER_MASK(0x1f);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
-
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
-		       DPIO_LANESTAGGER_STRAP(stagger) |
-		       DPIO_LANESTAGGER_STRAP_OVRD |
-		       DPIO_TX1_STAGGER_MASK(0x1f) |
-		       DPIO_TX1_STAGGER_MULT(6) |
-		       DPIO_TX2_STAGGER_MULT(0));
-
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
-		       DPIO_LANESTAGGER_STRAP(stagger) |
-		       DPIO_LANESTAGGER_STRAP_OVRD |
-		       DPIO_TX1_STAGGER_MASK(0x1f) |
-		       DPIO_TX1_STAGGER_MULT(7) |
-		       DPIO_TX2_STAGGER_MULT(5));
-
-	/* Deassert data lane reset */
-	chv_data_lane_soft_reset(encoder, false);
-
-	mutex_unlock(&dev_priv->sb_lock);
+	chv_phy_pre_encoder_enable(encoder);
 
 	/* FIXME: Program the support xxx V-dB */
 	/* Use 800mV-0dB */
@@ -1820,10 +1760,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	vlv_wait_port_ready(dev_priv, dport, 0x0);
 
 	/* Second common lane will stay alive on its own now */
-	if (dport->release_cl2_override) {
-		chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
-		dport->release_cl2_override = false;
-	}
+	chv_phy_release_cl2_override(encoder);
 }
 
 static void intel_hdmi_destroy(struct drm_connector *connector)