drm/i915: Stop frobbing with DDI encoder->type

Currently the DDI encoder->type will change at runtime depending on
what kind of hotplugs we've processed. That's quite bad since we can't
really trust that that current value of encoder->type actually matches
the type of signal we're trying to drive through it.

Let's eliminate that problem by declaring that non-eDP DDI port will
always have the encoder type as INTEL_OUTPUT_DDI. This means the code
can no longer try to distinguish DP vs. HDMI based on encoder->type.
We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
there's a bunch of code that relies on that value to identify eDP
encoders.

We'll introduce a new encoder .compute_output_type() hook. This allows
us to compute the full output_types before any encoder .compute_config()
hooks get called, thus those hooks can rely on output_types being
correct, which is useful for cloning on oldr platforms. For now we'll
just look at the connector type and pick the correct mode based on that.
In the future the new hook could be used to implement dynamic switching
between LS and PCON modes for LSPCON.

v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
v4: Rebase
v5: Populate output_types in .get_config() rather than in the caller
v5: Split out populating output_types in .get_config() (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

1 files changed, 6 insertions, 13 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 30688a5..f0c4996 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -758,11 +758,16 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
 		struct intel_dp *intel_dp;
 
 		if (encoder->type != INTEL_OUTPUT_DP &&
-		    encoder->type != INTEL_OUTPUT_EDP)
+		    encoder->type != INTEL_OUTPUT_EDP &&
+		    encoder->type != INTEL_OUTPUT_DDI)
 			continue;
 
 		intel_dp = enc_to_intel_dp(&encoder->base);
 
+		/* Skip pure DVI/HDMI DDI encoders */
+		if (!i915_mmio_reg_valid(intel_dp->output_reg))
+			continue;
+
 		WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
 
 		if (encoder->type != INTEL_OUTPUT_EDP)
@@ -4733,8 +4738,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
 {
 	struct drm_connector *connector = &intel_connector->base;
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct intel_encoder *intel_encoder = &intel_dig_port->base;
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status;
 	u8 sink_irq_vector = 0;
@@ -4767,9 +4770,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
 		goto out;
 	}
 
-	if (intel_encoder->type != INTEL_OUTPUT_EDP)
-		intel_encoder->type = INTEL_OUTPUT_DP;
-
 	if (intel_dp->reset_link_params) {
 		/* Initial max link lane count */
 		intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
@@ -4886,9 +4886,6 @@ intel_dp_force(struct drm_connector *connector)
 	intel_dp_set_edid(intel_dp);
 
 	intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
-
-	if (intel_encoder->type != INTEL_OUTPUT_EDP)
-		intel_encoder->type = INTEL_OUTPUT_DP;
 }
 
 static int intel_dp_get_modes(struct drm_connector *connector)
@@ -5107,10 +5104,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	enum irqreturn ret = IRQ_NONE;
 
-	if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
-	    intel_dig_port->base.type != INTEL_OUTPUT_HDMI)
-		intel_dig_port->base.type = INTEL_OUTPUT_DP;
-
 	if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
 		/*
 		 * vdd off can generate a long pulse on eDP which