diff options
author | Thomas Richter <thor@math.tu-berlin.de> | 2012-07-18 19:22:30 +0200 |
---|---|---|
committer | Daniel Vetter <daniel.vetter@ffwll.ch> | 2012-07-25 18:23:48 +0200 |
commit | 7434a255a5cf42819b7e42377f18aaa02f6be52b (patch) | |
tree | db156cc18e7c82b1769f32300dabf89cf1329d76 /drivers/gpu/drm/i915/dvo_ns2501.c | |
parent | ab9d7c302af858e1bc8f613c3a6f1eea3c4c0364 (diff) | |
download | op-kernel-dev-7434a255a5cf42819b7e42377f18aaa02f6be52b.zip op-kernel-dev-7434a255a5cf42819b7e42377f18aaa02f6be52b.tar.gz |
drm/i915: Support for ns2501-DVO
This patch adds support for the ns2501 DVO, found in some older Fujitsu/Siemens Labtops.
It is in the state of "works for me".
Includes now proper DPMS support. Includes switching between resolutions -
from 640x480 to 1024x768.
Currently assumes that the native display resolution is 1024x768.
The ns2501 seems to be rather critical - if the output PLL is not
running, the chip doesn't seem to be clocked and then doesn't react
on i2c messages. Thus, a quick'n-dirty trick ensures that the DVO
is active before submitting any i2c messages to it. This is
probably to be reviewed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17902
Signed-off-by: Thomas Richter <thor@math.tu-berlin.de>
[danvet: fixup whitespace fail.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'drivers/gpu/drm/i915/dvo_ns2501.c')
-rw-r--r-- | drivers/gpu/drm/i915/dvo_ns2501.c | 582 |
1 files changed, 582 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c new file mode 100644 index 0000000..1a0bad9 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_ns2501.c @@ -0,0 +1,582 @@ +/* + * + * Copyright (c) 2012 Gilles Dartiguelongue, Thomas Richter + * + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "dvo.h" +#include "i915_reg.h" +#include "i915_drv.h" + +#define NS2501_VID 0x1305 +#define NS2501_DID 0x6726 + +#define NS2501_VID_LO 0x00 +#define NS2501_VID_HI 0x01 +#define NS2501_DID_LO 0x02 +#define NS2501_DID_HI 0x03 +#define NS2501_REV 0x04 +#define NS2501_RSVD 0x05 +#define NS2501_FREQ_LO 0x06 +#define NS2501_FREQ_HI 0x07 + +#define NS2501_REG8 0x08 +#define NS2501_8_VEN (1<<5) +#define NS2501_8_HEN (1<<4) +#define NS2501_8_DSEL (1<<3) +#define NS2501_8_BPAS (1<<2) +#define NS2501_8_RSVD (1<<1) +#define NS2501_8_PD (1<<0) + +#define NS2501_REG9 0x09 +#define NS2501_9_VLOW (1<<7) +#define NS2501_9_MSEL_MASK (0x7<<4) +#define NS2501_9_TSEL (1<<3) +#define NS2501_9_RSEN (1<<2) +#define NS2501_9_RSVD (1<<1) +#define NS2501_9_MDI (1<<0) + +#define NS2501_REGC 0x0c + +struct ns2501_priv { + //I2CDevRec d; + bool quiet; + int reg_8_shadow; + int reg_8_set; + // Shadow registers for i915 + int dvoc; + int pll_a; + int srcdim; + int fw_blc; +}; + +#define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr)) + +/* + * Include the PLL launcher prototype + */ +extern void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe); + +/* + * For reasons unclear to me, the ns2501 at least on the Fujitsu/Siemens + * laptops does not react on the i2c bus unless + * both the PLL is running and the display is configured in its native + * resolution. + * This function forces the DVO on, and stores the registers it touches. + * Afterwards, registers are restored to regular values. + * + * This is pretty much a hack, though it works. + * Without that, ns2501_readb and ns2501_writeb fail + * when switching the resolution. + */ + +static void enable_dvo(struct intel_dvo_device *dvo) +{ + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + + DRM_DEBUG_KMS("%s: Trying to re-enable the DVO\n", __FUNCTION__); + + ns->dvoc = I915_READ(DVO_C); + ns->pll_a = I915_READ(_DPLL_A); + ns->srcdim = I915_READ(DVOC_SRCDIM); + ns->fw_blc = I915_READ(FW_BLC); + + I915_WRITE(DVOC, 0x10004084); + I915_WRITE(_DPLL_A, 0xd0820000); + I915_WRITE(DVOC_SRCDIM, 0x400300); // 1024x768 + I915_WRITE(FW_BLC, 0x1080304); + + intel_enable_pll(dev_priv, 0); + + I915_WRITE(DVOC, 0x90004084); +} + +/* + * Restore the I915 registers modified by the above + * trigger function. + */ +static void restore_dvo(struct intel_dvo_device *dvo) +{ + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + + I915_WRITE(DVOC, ns->dvoc); + I915_WRITE(_DPLL_A, ns->pll_a); + I915_WRITE(DVOC_SRCDIM, ns->srcdim); + I915_WRITE(FW_BLC, ns->fw_blc); +} + +/* +** Read a register from the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t * ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = dvo->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = dvo->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!ns->quiet) { + DRM_DEBUG_KMS + ("Unable to read register 0x%02x from %s:0x%02x.\n", addr, + adapter->name, dvo->slave_addr); + } + + return false; +} + +/* +** Write a register to the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + uint8_t out_buf[2]; + + struct i2c_msg msg = { + .addr = dvo->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(adapter, &msg, 1) == 1) { + return true; + } + + if (!ns->quiet) { + DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", + addr, adapter->name, dvo->slave_addr); + } + + return false; +} + +/* National Semiconductor 2501 driver for chip on i2c bus + * scan for the chip on the bus. + * Hope the VBIOS initialized the PLL correctly so we can + * talk to it. If not, it will not be seen and not detected. + * Bummer! + */ +static bool ns2501_init(struct intel_dvo_device *dvo, + struct i2c_adapter *adapter) +{ + /* this will detect the NS2501 chip on the specified i2c bus */ + struct ns2501_priv *ns; + unsigned char ch; + + ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL); + if (ns == NULL) + return false; + + dvo->i2c_bus = adapter; + dvo->dev_priv = ns; + ns->quiet = true; + + if (!ns2501_readb(dvo, NS2501_VID_LO, &ch)) + goto out; + + if (ch != (NS2501_VID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + + if (!ns2501_readb(dvo, NS2501_DID_LO, &ch)) + goto out; + + if (ch != (NS2501_DID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + ns->quiet = false; + ns->reg_8_set = 0; + ns->reg_8_shadow = + NS2501_8_PD | NS2501_8_BPAS | NS2501_8_VEN | NS2501_8_HEN; + + DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n"); + return true; + +out: + kfree(ns); + return false; +} + +static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo) +{ + /* + * This is a Laptop display, it doesn't have hotplugging. + * Even if not, the detection bit of the 2501 is unreliable as + * it only works for some display types. + * It is even more unreliable as the PLL must be active for + * allowing reading from the chiop. + */ + return connector_status_connected; +} + +static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + DRM_DEBUG_KMS + ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n", + __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay, + mode->vtotal); + + /* + * Currently, these are all the modes I have data from. + * More might exist. Unclear how to find the native resolution + * of the panel in here so we could always accept it + * by disabling the scaler. + */ + if ((mode->hdisplay == 800 && mode->vdisplay == 600) || + (mode->hdisplay == 640 && mode->vdisplay == 480) || + (mode->hdisplay == 1024 && mode->vdisplay == 768)) { + return MODE_OK; + } else { + return MODE_ONE_SIZE; /* Is this a reasonable error? */ + } +} + +static void ns2501_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + bool ok; + bool restore = false; + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + + DRM_DEBUG_KMS + ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n", + __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay, + mode->vtotal); + + /* + * Where do I find the native resolution for which scaling is not required??? + * + * First trigger the DVO on as otherwise the chip does not appear on the i2c + * bus. + */ + do { + ok = true; + + if (mode->hdisplay == 800 && mode->vdisplay == 600) { + /* mode 277 */ + ns->reg_8_shadow &= ~NS2501_8_BPAS; + DRM_DEBUG_KMS("%s: switching to 800x600\n", + __FUNCTION__); + + /* + * No, I do not know where this data comes from. + * It is just what the video bios left in the DVO, so + * I'm just copying it here over. + * This also means that I cannot support any other modes + * except the ones supported by the bios. + */ + ok &= ns2501_writeb(dvo, 0x11, 0xc8); // 0xc7 also works. + ok &= ns2501_writeb(dvo, 0x1b, 0x19); + ok &= ns2501_writeb(dvo, 0x1c, 0x62); // VBIOS left 0x64 here, but 0x62 works nicer + ok &= ns2501_writeb(dvo, 0x1d, 0x02); + + ok &= ns2501_writeb(dvo, 0x34, 0x03); + ok &= ns2501_writeb(dvo, 0x35, 0xff); + + ok &= ns2501_writeb(dvo, 0x80, 0x27); + ok &= ns2501_writeb(dvo, 0x81, 0x03); + ok &= ns2501_writeb(dvo, 0x82, 0x41); + ok &= ns2501_writeb(dvo, 0x83, 0x05); + + ok &= ns2501_writeb(dvo, 0x8d, 0x02); + ok &= ns2501_writeb(dvo, 0x8e, 0x04); + ok &= ns2501_writeb(dvo, 0x8f, 0x00); + + ok &= ns2501_writeb(dvo, 0x90, 0xfe); /* vertical. VBIOS left 0xff here, but 0xfe works better */ + ok &= ns2501_writeb(dvo, 0x91, 0x07); + ok &= ns2501_writeb(dvo, 0x94, 0x00); + ok &= ns2501_writeb(dvo, 0x95, 0x00); + + ok &= ns2501_writeb(dvo, 0x96, 0x00); + + ok &= ns2501_writeb(dvo, 0x99, 0x00); + ok &= ns2501_writeb(dvo, 0x9a, 0x88); + + ok &= ns2501_writeb(dvo, 0x9c, 0x23); /* Looks like first and last line of the image. */ + ok &= ns2501_writeb(dvo, 0x9d, 0x00); + ok &= ns2501_writeb(dvo, 0x9e, 0x25); + ok &= ns2501_writeb(dvo, 0x9f, 0x03); + + ok &= ns2501_writeb(dvo, 0xa4, 0x80); + + ok &= ns2501_writeb(dvo, 0xb6, 0x00); + + ok &= ns2501_writeb(dvo, 0xb9, 0xc8); /* horizontal? */ + ok &= ns2501_writeb(dvo, 0xba, 0x00); /* horizontal? */ + + ok &= ns2501_writeb(dvo, 0xc0, 0x05); /* horizontal? */ + ok &= ns2501_writeb(dvo, 0xc1, 0xd7); + + ok &= ns2501_writeb(dvo, 0xc2, 0x00); + ok &= ns2501_writeb(dvo, 0xc3, 0xf8); + + ok &= ns2501_writeb(dvo, 0xc4, 0x03); + ok &= ns2501_writeb(dvo, 0xc5, 0x1a); + + ok &= ns2501_writeb(dvo, 0xc6, 0x00); + ok &= ns2501_writeb(dvo, 0xc7, 0x73); + ok &= ns2501_writeb(dvo, 0xc8, 0x02); + + } else if (mode->hdisplay == 640 && mode->vdisplay == 480) { + /* mode 274 */ + DRM_DEBUG_KMS("%s: switching to 640x480\n", + __FUNCTION__); + /* + * No, I do not know where this data comes from. + * It is just what the video bios left in the DVO, so + * I'm just copying it here over. + * This also means that I cannot support any other modes + * except the ones supported by the bios. + */ + ns->reg_8_shadow &= ~NS2501_8_BPAS; + + ok &= ns2501_writeb(dvo, 0x11, 0xa0); + ok &= ns2501_writeb(dvo, 0x1b, 0x11); + ok &= ns2501_writeb(dvo, 0x1c, 0x54); + ok &= ns2501_writeb(dvo, 0x1d, 0x03); + + ok &= ns2501_writeb(dvo, 0x34, 0x03); + ok &= ns2501_writeb(dvo, 0x35, 0xff); + + ok &= ns2501_writeb(dvo, 0x80, 0xff); + ok &= ns2501_writeb(dvo, 0x81, 0x07); + ok &= ns2501_writeb(dvo, 0x82, 0x3d); + ok &= ns2501_writeb(dvo, 0x83, 0x05); + + ok &= ns2501_writeb(dvo, 0x8d, 0x02); + ok &= ns2501_writeb(dvo, 0x8e, 0x10); + ok &= ns2501_writeb(dvo, 0x8f, 0x00); + + ok &= ns2501_writeb(dvo, 0x90, 0xff); /* vertical */ + ok &= ns2501_writeb(dvo, 0x91, 0x07); + ok &= ns2501_writeb(dvo, 0x94, 0x00); + ok &= ns2501_writeb(dvo, 0x95, 0x00); + + ok &= ns2501_writeb(dvo, 0x96, 0x05); + + ok &= ns2501_writeb(dvo, 0x99, 0x00); + ok &= ns2501_writeb(dvo, 0x9a, 0x88); + + ok &= ns2501_writeb(dvo, 0x9c, 0x24); + ok &= ns2501_writeb(dvo, 0x9d, 0x00); + ok &= ns2501_writeb(dvo, 0x9e, 0x25); + ok &= ns2501_writeb(dvo, 0x9f, 0x03); + + ok &= ns2501_writeb(dvo, 0xa4, 0x84); + + ok &= ns2501_writeb(dvo, 0xb6, 0x09); + + ok &= ns2501_writeb(dvo, 0xb9, 0xa0); /* horizontal? */ + ok &= ns2501_writeb(dvo, 0xba, 0x00); /* horizontal? */ + + ok &= ns2501_writeb(dvo, 0xc0, 0x05); /* horizontal? */ + ok &= ns2501_writeb(dvo, 0xc1, 0x90); + + ok &= ns2501_writeb(dvo, 0xc2, 0x00); + ok &= ns2501_writeb(dvo, 0xc3, 0x0f); + + ok &= ns2501_writeb(dvo, 0xc4, 0x03); + ok &= ns2501_writeb(dvo, 0xc5, 0x16); + + ok &= ns2501_writeb(dvo, 0xc6, 0x00); + ok &= ns2501_writeb(dvo, 0xc7, 0x02); + ok &= ns2501_writeb(dvo, 0xc8, 0x02); + + } else if (mode->hdisplay == 1024 && mode->vdisplay == 768) { + /* mode 280 */ + DRM_DEBUG_KMS("%s: switching to 1024x768\n", + __FUNCTION__); + /* + * This might or might not work, actually. I'm silently + * assuming here that the native panel resolution is + * 1024x768. If not, then this leaves the scaler disabled + * generating a picture that is likely not the expected. + * + * Problem is that I do not know where to take the panel + * dimensions from. + * + * Enable the bypass, scaling not required. + * + * The scaler registers are irrelevant here.... + * + */ + ns->reg_8_shadow |= NS2501_8_BPAS; + ok &= ns2501_writeb(dvo, 0x37, 0x44); + } else { + /* + * Data not known. Bummer! + * Hopefully, the code should not go here + * as mode_OK delivered no other modes. + */ + ns->reg_8_shadow |= NS2501_8_BPAS; + } + ok &= ns2501_writeb(dvo, NS2501_REG8, ns->reg_8_shadow); + + if (!ok) { + if (restore) + restore_dvo(dvo); + enable_dvo(dvo); + restore = true; + } + } while (!ok); + /* + * Restore the old i915 registers before + * forcing the ns2501 on. + */ + if (restore) + restore_dvo(dvo); +} + +/* set the NS2501 power state */ +static void ns2501_dpms(struct intel_dvo_device *dvo, int mode) +{ + bool ok; + bool restore = false; + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + unsigned char ch; + + DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %d\n", + __FUNCTION__, mode); + + ch = ns->reg_8_shadow; + + if (mode == DRM_MODE_DPMS_ON) + ch |= NS2501_8_PD; + else + ch &= ~NS2501_8_PD; + + if (ns->reg_8_set == 0 || ns->reg_8_shadow != ch) { + ns->reg_8_set = 1; + ns->reg_8_shadow = ch; + + do { + ok = true; + ok &= ns2501_writeb(dvo, NS2501_REG8, ch); + ok &= + ns2501_writeb(dvo, 0x34, + (mode == + DRM_MODE_DPMS_ON) ? (0x03) : (0x00)); + ok &= + ns2501_writeb(dvo, 0x35, + (mode == + DRM_MODE_DPMS_ON) ? (0xff) : (0x00)); + if (!ok) { + if (restore) + restore_dvo(dvo); + enable_dvo(dvo); + restore = true; + } + } while (!ok); + + if (restore) + restore_dvo(dvo); + } +} + +static void ns2501_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + + ns2501_readb(dvo, NS2501_FREQ_LO, &val); + DRM_LOG_KMS("NS2501_FREQ_LO: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_FREQ_HI, &val); + DRM_LOG_KMS("NS2501_FREQ_HI: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REG8, &val); + DRM_LOG_KMS("NS2501_REG8: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REG9, &val); + DRM_LOG_KMS("NS2501_REG9: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REGC, &val); + DRM_LOG_KMS("NS2501_REGC: 0x%02x\n", val); +} + +static void ns2501_destroy(struct intel_dvo_device *dvo) +{ + struct ns2501_priv *ns = dvo->dev_priv; + + if (ns) { + kfree(ns); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ns2501_ops = { + .init = ns2501_init, + .detect = ns2501_detect, + .mode_valid = ns2501_mode_valid, + .mode_set = ns2501_mode_set, + .dpms = ns2501_dpms, + .dump_regs = ns2501_dump_regs, + .destroy = ns2501_destroy, +}; |