diff options
author | Alan Cox <alan@linux.intel.com> | 2011-11-03 18:22:26 +0000 |
---|---|---|
committer | Dave Airlie <airlied@redhat.com> | 2011-11-16 11:27:12 +0000 |
commit | 1b082ccf5901108d3acd860a73d8c0442556c0bb (patch) | |
tree | d5b362913e21881a790490fe50228a13cb556be0 /drivers/gpu/drm/gma500 | |
parent | 89c78134cc54dff016c83367912eb055637fa50c (diff) | |
download | op-kernel-dev-1b082ccf5901108d3acd860a73d8c0442556c0bb.zip op-kernel-dev-1b082ccf5901108d3acd860a73d8c0442556c0bb.tar.gz |
gma500: Add Oaktrail support
Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit
different to the GMA500 but similar enough it makes sense to plug it into
the same driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Diffstat (limited to 'drivers/gpu/drm/gma500')
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail.h | 252 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_crtc.c | 610 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_device.c | 489 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_hdmi.c | 852 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c | 327 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_lvds.c | 406 |
6 files changed, 2936 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/oaktrail.h b/drivers/gpu/drm/gma500/oaktrail.h new file mode 100644 index 0000000..2da1f36 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail.h @@ -0,0 +1,252 @@ +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +/* MID device specific descriptors */ + +struct oaktrail_vbt { + s8 signature[4]; /*4 bytes,"$GCT" */ + u8 revision; + u8 size; + u8 checksum; + void *oaktrail_gct; +} __packed; + +struct oaktrail_timing_info { + u16 pixel_clock; + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_offset_lo; + u8 hsync_pulse_width_lo; + u8 vsync_pulse_width_lo:4; + u8 vsync_offset_lo:4; + u8 vsync_pulse_width_hi:2; + u8 vsync_offset_hi:2; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; + u8 width_mm_lo; + u8 height_mm_lo; + u8 height_mm_hi:4; + u8 width_mm_hi:4; + u8 hborder; + u8 vborder; + u8 unknown0:1; + u8 hsync_positive:1; + u8 vsync_positive:1; + u8 separate_sync:2; + u8 stereo:1; + u8 unknown6:1; + u8 interlaced:1; +} __packed; + +struct gct_r10_timing_info { + u16 pixel_clock; + u32 hactive_lo:8; + u32 hactive_hi:4; + u32 hblank_lo:8; + u32 hblank_hi:4; + u32 hsync_offset_lo:8; + u16 hsync_offset_hi:2; + u16 hsync_pulse_width_lo:8; + u16 hsync_pulse_width_hi:2; + u16 hsync_positive:1; + u16 rsvd_1:3; + u8 vactive_lo:8; + u16 vactive_hi:4; + u16 vblank_lo:8; + u16 vblank_hi:4; + u16 vsync_offset_lo:4; + u16 vsync_offset_hi:2; + u16 vsync_pulse_width_lo:4; + u16 vsync_pulse_width_hi:2; + u16 vsync_positive:1; + u16 rsvd_2:3; +} __packed; + +struct oaktrail_panel_descriptor_v1 { + u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ + /* 0x61190 if MIPI */ + u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */ + /* Register 0x61210 */ + struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */ + u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */ + /* Bit 0, Frequency, 15 bits,0 - 32767Hz */ + /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */ + u16 Panel_MIPI_Display_Descriptor; + /*16 bits, Defined as follows: */ + /* if MIPI, 0x0000 if LVDS */ + /* Bit 0, Type, 2 bits, */ + /* 0: Type-1, */ + /* 1: Type-2, */ + /* 2: Type-3, */ + /* 3: Type-4 */ + /* Bit 2, Pixel Format, 4 bits */ + /* Bit0: 16bpp (not supported in LNC), */ + /* Bit1: 18bpp loosely packed, */ + /* Bit2: 18bpp packed, */ + /* Bit3: 24bpp */ + /* Bit 6, Reserved, 2 bits, 00b */ + /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ + /* Bit 14, Reserved, 2 bits, 00b */ +} __packed; + +struct oaktrail_panel_descriptor_v2 { + u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ + /* 0x61190 if MIPI */ + u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */ + /* Register 0x61210 */ + struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */ + u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/ + /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/ + u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */ + /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/ + u16 Panel_MIPI_Display_Descriptor; + /*16 bits, Defined as follows: */ + /* if MIPI, 0x0000 if LVDS */ + /* Bit 0, Type, 2 bits, */ + /* 0: Type-1, */ + /* 1: Type-2, */ + /* 2: Type-3, */ + /* 3: Type-4 */ + /* Bit 2, Pixel Format, 4 bits */ + /* Bit0: 16bpp (not supported in LNC), */ + /* Bit1: 18bpp loosely packed, */ + /* Bit2: 18bpp packed, */ + /* Bit3: 24bpp */ + /* Bit 6, Reserved, 2 bits, 00b */ + /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ + /* Bit 14, Reserved, 2 bits, 00b */ +} __packed; + +union oaktrail_panel_rx { + struct { + u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/ + /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */ + u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */ + /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/ + u16 SupportedVideoTransferMode:2; /*0: Non-burst only */ + /* 1: Burst and non-burst */ + /* 2/3: Reserved */ + u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/ + u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/ + u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/ + u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */ + u16 Rsvd:5;/*5 bits,00000b */ + } panelrx; + u16 panel_receiver; +} __packed; + +struct oaktrail_gct_v1 { + union { /*8 bits,Defined as follows: */ + struct { + u8 PanelType:4; /*4 bits, Bit field for panels*/ + /* 0 - 3: 0 = LVDS, 1 = MIPI*/ + /*2 bits,Specifies which of the*/ + u8 BootPanelIndex:2; + /* 4 panels to use by default*/ + u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ + /* the 4 MIPI DSI receivers to use*/ + } PD; + u8 PanelDescriptor; + }; + struct oaktrail_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/ + union oaktrail_panel_rx panelrx[4]; /* panel receivers*/ +} __packed; + +struct oaktrail_gct_v2 { + union { /*8 bits,Defined as follows: */ + struct { + u8 PanelType:4; /*4 bits, Bit field for panels*/ + /* 0 - 3: 0 = LVDS, 1 = MIPI*/ + /*2 bits,Specifies which of the*/ + u8 BootPanelIndex:2; + /* 4 panels to use by default*/ + u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ + /* the 4 MIPI DSI receivers to use*/ + } PD; + u8 PanelDescriptor; + }; + struct oaktrail_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/ + union oaktrail_panel_rx panelrx[4]; /* panel receivers*/ +} __packed; + +struct oaktrail_gct_data { + u8 bpi; /* boot panel index, number of panel used during boot */ + u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */ + struct oaktrail_timing_info DTD; /* timing info for the selected panel */ + u32 Panel_Port_Control; + u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u32 PP_Cycle_Delay; + u16 Panel_Backlight_Inverter_Descriptor; + u16 Panel_MIPI_Display_Descriptor; +} __packed; + +#define MODE_SETTING_IN_CRTC 0x1 +#define MODE_SETTING_IN_ENCODER 0x2 +#define MODE_SETTING_ON_GOING 0x3 +#define MODE_SETTING_IN_DSR 0x4 +#define MODE_SETTING_ENCODER_DONE 0x8 + +#define GCT_R10_HEADER_SIZE 16 +#define GCT_R10_DISPLAY_DESC_SIZE 28 + +/* + * Moorestown HDMI interfaces + */ + +struct oaktrail_hdmi_dev { + struct pci_dev *dev; + void __iomem *regs; + unsigned int mmio, mmio_len; + int dpms_mode; + struct hdmi_i2c_dev *i2c_dev; + + /* register state */ + u32 saveDPLL_CTRL; + u32 saveDPLL_DIV_CTRL; + u32 saveDPLL_ADJUST; + u32 saveDPLL_UPDATE; + u32 saveDPLL_CLK_ENABLE; + u32 savePCH_HTOTAL_B; + u32 savePCH_HBLANK_B; + u32 savePCH_HSYNC_B; + u32 savePCH_VTOTAL_B; + u32 savePCH_VBLANK_B; + u32 savePCH_VSYNC_B; + u32 savePCH_PIPEBCONF; + u32 savePCH_PIPEBSRC; +}; + +extern void oaktrail_hdmi_setup(struct drm_device *dev); +extern void oaktrail_hdmi_teardown(struct drm_device *dev); +extern int oaktrail_hdmi_i2c_init(struct pci_dev *dev); +extern void oaktrail_hdmi_i2c_exit(struct pci_dev *dev); +extern void oaktrail_hdmi_save(struct drm_device *dev); +extern void oaktrail_hdmi_restore(struct drm_device *dev); +extern void oaktrail_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev); diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c new file mode 100644 index 0000000..7f9c791 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c @@ -0,0 +1,610 @@ +/* + * Copyright © 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drmP.h> +#include "framebuffer.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_intel_display.h" +#include "power.h" + +struct psb_intel_range_t { + int min, max; +}; + +struct oaktrail_limit_t { + struct psb_intel_range_t dot, m, p1; +}; + +struct oaktrail_clock_t { + /* derived values */ + int dot; + int m; + int p1; +}; + +#define MRST_LIMIT_LVDS_100L 0 +#define MRST_LIMIT_LVDS_83 1 +#define MRST_LIMIT_LVDS_100 2 + +#define MRST_DOT_MIN 19750 +#define MRST_DOT_MAX 120000 +#define MRST_M_MIN_100L 20 +#define MRST_M_MIN_100 10 +#define MRST_M_MIN_83 12 +#define MRST_M_MAX_100L 34 +#define MRST_M_MAX_100 17 +#define MRST_M_MAX_83 20 +#define MRST_P1_MIN 2 +#define MRST_P1_MAX_0 7 +#define MRST_P1_MAX_1 8 + +static const struct oaktrail_limit_t oaktrail_limits[] = { + { /* MRST_LIMIT_LVDS_100L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + }, + { /* MRST_LIMIT_LVDS_83L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0}, + }, + { /* MRST_LIMIT_LVDS_100 */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + }, +}; + +#define MRST_M_MIN 10 +static const u32 oaktrail_m_converts[] = { + 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C, + 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25, + 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c, +}; + +static const struct oaktrail_limit_t *oaktrail_limit(struct drm_crtc *crtc) +{ + const struct oaktrail_limit_t *limit = NULL; + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + + if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) + || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) { + switch (dev_priv->core_freq) { + case 100: + limit = &oaktrail_limits[MRST_LIMIT_LVDS_100L]; + break; + case 166: + limit = &oaktrail_limits[MRST_LIMIT_LVDS_83]; + break; + case 200: + limit = &oaktrail_limits[MRST_LIMIT_LVDS_100]; + break; + } + } else { + limit = NULL; + dev_err(dev->dev, "oaktrail_limit Wrong display type.\n"); + } + + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ +static void oaktrail_clock(int refclk, struct oaktrail_clock_t *clock) +{ + clock->dot = (refclk * clock->m) / (14 * clock->p1); +} + +void mrstPrintPll(char *prefix, struct oaktrail_clock_t *clock) +{ + pr_debug("%s: dotclock = %d, m = %d, p1 = %d.\n", + prefix, clock->dot, clock->m, clock->p1); +} + +/** + * Returns a set of divisors for the desired target clock with the given refclk, + * or FALSE. Divisor values are the actual divisors for + */ +static bool +mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk, + struct oaktrail_clock_t *best_clock) +{ + struct oaktrail_clock_t clock; + const struct oaktrail_limit_t *limit = oaktrail_limit(crtc); + int err = target; + + memset(best_clock, 0, sizeof(*best_clock)); + + for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { + for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; + clock.p1++) { + int this_err; + + oaktrail_clock(refclk, &clock); + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + dev_dbg(crtc->dev->dev, "mrstFindBestPLL err = %d.\n", err); + return err != target; +} + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + bool enabled; + + if (!gma_power_begin(dev, true)) + return; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable the DPLL */ + temp = REG_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE(dpll_reg, temp); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + /* Enable the pipe */ + temp = REG_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + /* Enable the plane */ + temp = REG_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(dspcntr_reg, + temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); + } + + psb_intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable + if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, true); TODO */ + break; + case DRM_MODE_DPMS_OFF: + /* Give the overlay scaler a chance to disable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + /* Disable display plane */ + temp = REG_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(dspcntr_reg, + temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); + REG_READ(dspbase_reg); + } + + /* Next, disable display pipes */ + temp = REG_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + REG_READ(pipeconf_reg); + } + /* Wait for for the pipe disable to take effect. */ + psb_intel_wait_for_vblank(dev); + + temp = REG_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; + + /*Set FIFO Watermarks*/ + REG_WRITE(DSPARB, 0x3FFF); + REG_WRITE(DSPFW1, 0x3F88080A); + REG_WRITE(DSPFW2, 0x0b060808); + REG_WRITE(DSPFW3, 0x0); + REG_WRITE(DSPFW4, 0x08030404); + REG_WRITE(DSPFW5, 0x04040404); + REG_WRITE(DSPFW6, 0x78); + REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000); + /* Must write Bit 14 of the Chicken Bit Register */ + + gma_power_end(dev); +} + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int oaktrail_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + return (pfit_control >> 29) & 3; +} + +static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct drm_psb_private *dev_priv = dev->dev_private; + int pipe = psb_intel_crtc->pipe; + int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk = 0; + struct oaktrail_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + bool is_mipi = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct psb_intel_output *psb_intel_output = NULL; + uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; + struct drm_encoder *encoder; + + if (!gma_power_begin(dev, true)) + return 0; + + memcpy(&psb_intel_crtc->saved_mode, + mode, + sizeof(struct drm_display_mode)); + memcpy(&psb_intel_crtc->saved_adjusted_mode, + adjusted_mode, + sizeof(struct drm_display_mode)); + + list_for_each_entry(encoder, &mode_config->encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + psb_intel_output = enc_to_psb_intel_output(encoder); + switch (psb_intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + case INTEL_OUTPUT_MIPI: + is_mipi = true; + break; + } + } + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable the panel fitter if it was on our pipe */ + if (oaktrail_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + REG_WRITE(pipesrc_reg, + ((mode->crtc_hdisplay - 1) << 16) | + (mode->crtc_vdisplay - 1)); + + if (psb_intel_output) + drm_connector_property_get_value(&psb_intel_output->base, + dev->mode_config.scaling_mode_property, &scalingType); + + if (scalingType == DRM_MODE_SCALE_NO_SCALE) { + /* Moorestown doesn't have register support for centering so + * we need to mess with the h/vblank and h/vsync start and + * ends to get centering */ + int offsetX = 0, offsetY = 0; + + offsetX = (adjusted_mode->crtc_hdisplay - + mode->crtc_hdisplay) / 2; + offsetY = (adjusted_mode->crtc_vdisplay - + mode->crtc_vdisplay) / 2; + + REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(hblank_reg, + (adjusted_mode->crtc_hblank_start - offsetX - 1) | + ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16)); + REG_WRITE(hsync_reg, + (adjusted_mode->crtc_hsync_start - offsetX - 1) | + ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16)); + REG_WRITE(vblank_reg, + (adjusted_mode->crtc_vblank_start - offsetY - 1) | + ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16)); + REG_WRITE(vsync_reg, + (adjusted_mode->crtc_vsync_start - offsetY - 1) | + ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16)); + } else { + REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + } + + /* Flush the plane changes */ + { + struct drm_crtc_helper_funcs *crtc_funcs = + crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + /* setup pipeconf */ + pipeconf = REG_READ(pipeconf_reg); + + /* Set up the display plane register */ + dspcntr = REG_READ(dspcntr_reg); + dspcntr |= DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE; + dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE; + + if (is_mipi) + goto oaktrail_crtc_mode_set_exit; + + refclk = dev_priv->core_freq * 1000; + + dpll = 0; /*BIT16 = 0 for 100MHz reference */ + + ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock); + + if (!ok) { + dev_dbg(dev->dev, "mrstFindBestPLL fail in oaktrail_crtc_mode_set.\n"); + } else { + dev_dbg(dev->dev, "oaktrail_crtc_mode_set pixel clock = %d," + "m = %x, p1 = %x.\n", clock.dot, clock.m, + clock.p1); + } + + fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8; + + dpll |= DPLL_VGA_MODE_DIS; + + + dpll |= DPLL_VCO_ENABLE; + + if (is_lvds) + dpll |= DPLLA_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + + if (is_sdvo) { + int sdvo_pixel_multiply = + adjusted_mode->clock / mode->clock; + + dpll |= DPLL_DVO_HIGH_SPEED; + dpll |= + (sdvo_pixel_multiply - + 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 2)) << 17; + + dpll |= DPLL_VCO_ENABLE; + + mrstPrintPll("chosen", &clock); + + if (dpll & DPLL_VCO_ENABLE) { + REG_WRITE(fp_reg, fp); + REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Check the DPLLA lock bit PIPEACONF[29] */ + udelay(150); + } + + REG_WRITE(fp_reg, fp); + REG_WRITE(dpll_reg, dpll); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + /* write it again -- the BIOS does, after all */ + REG_WRITE(dpll_reg, dpll); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + REG_WRITE(pipeconf_reg, pipeconf); + REG_READ(pipeconf_reg); + psb_intel_wait_for_vblank(dev); + + REG_WRITE(dspcntr_reg, dspcntr); + psb_intel_wait_for_vblank(dev); + +oaktrail_crtc_mode_set_exit: + gma_power_end(dev); + return 0; +} + +static bool oaktrail_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +int oaktrail_pipe_set_base(struct drm_crtc *crtc, + int x, int y, struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + /* struct drm_i915_master_private *master_priv; */ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); + int pipe = psb_intel_crtc->pipe; + unsigned long start, offset; + /* FIXME: check if we need this surely MRST is pipe 0 only */ + int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + u32 dspcntr; + int ret = 0; + + /* no fb bound */ + if (!crtc->fb) { + dev_dbg(dev->dev, "No FB bound\n"); + return 0; + } + + if (!gma_power_begin(dev, true)) + return 0; + + start = psbfb->gtt->offset; + offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + + REG_WRITE(dspstride, crtc->fb->pitch); + + dspcntr = REG_READ(dspcntr_reg); + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + dev_err(dev->dev, "Unknown color depth\n"); + ret = -EINVAL; + goto pipe_set_base_exit; + } + REG_WRITE(dspcntr_reg, dspcntr); + + if (0 /* FIXMEAC - check what PSB needs */) { + REG_WRITE(dspbase, offset); + REG_READ(dspbase); + REG_WRITE(dspsurf, start); + REG_READ(dspsurf); + } else { + REG_WRITE(dspbase, start + offset); + REG_READ(dspbase); + } + +pipe_set_base_exit: + gma_power_end(dev); + return ret; +} + +static void oaktrail_crtc_prepare(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void oaktrail_crtc_commit(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +const struct drm_crtc_helper_funcs oaktrail_helper_funcs = { + .dpms = oaktrail_crtc_dpms, + .mode_fixup = oaktrail_crtc_mode_fixup, + .mode_set = oaktrail_crtc_mode_set, + .mode_set_base = oaktrail_pipe_set_base, + .prepare = oaktrail_crtc_prepare, + .commit = oaktrail_crtc_commit, +}; + diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c new file mode 100644 index 0000000..41c418f --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -0,0 +1,489 @@ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/dmi.h> +#include <drm/drmP.h> +#include <drm/drm.h> +#include "psb_drm.h" +#include "psb_drv.h" +#include "psb_reg.h" +#include "psb_intel_reg.h" +#include <asm/mrst.h> +#include <asm/intel_scu_ipc.h> +#include "mid_bios.h" + +static int oaktrail_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + if (dev_priv->iLVDS_enable) + oaktrail_lvds_init(dev, &dev_priv->mode_dev); + else + dev_err(dev->dev, "DSI is not supported\n"); + if (dev_priv->hdmi_priv) + oaktrail_hdmi_init(dev, &dev_priv->mode_dev); + return 0; +} + +/* + * Provide the low level interfaces for the Moorestown backlight + */ + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 +#define BLC_ADJUSTMENT_MAX 100 + +static struct backlight_device *oaktrail_backlight_device; +static int oaktrail_brightness; + +static int oaktrail_set_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(oaktrail_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + int level = bd->props.brightness; + u32 blc_pwm_ctl; + u32 max_pwm_blc; + + /* Percentage 1-100% being valid */ + if (level < 1) + level = 1; + + if (gma_power_begin(dev, 0)) { + /* Calculate and set the brightness value */ + max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16; + blc_pwm_ctl = level * max_pwm_blc / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj1; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj2; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* force PWM bit on */ + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl); + gma_power_end(dev); + } + oaktrail_brightness = level; + return 0; +} + +static int oaktrail_get_brightness(struct backlight_device *bd) +{ + /* return locally cached var instead of HW read (due to DPST etc.) */ + /* FIXME: ideally return actual value in case firmware fiddled with + it */ + return oaktrail_brightness; +} + +static int device_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + unsigned long core_clock; + u16 bl_max_freq; + uint32_t value; + uint32_t blc_pwm_precision_factor; + + dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; + dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; + bl_max_freq = 256; + /* this needs to be set elsewhere */ + blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR; + + core_clock = dev_priv->core_freq; + + value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; + value *= blc_pwm_precision_factor; + value /= bl_max_freq; + value /= blc_pwm_precision_factor; + + if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ) + return -ERANGE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, value | (value << 16)); + gma_power_end(dev); + } + return 0; +} + +static const struct backlight_ops oaktrail_ops = { + .get_brightness = oaktrail_get_brightness, + .update_status = oaktrail_set_brightness, +}; + +int oaktrail_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + int ret; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 100; + props.type = BACKLIGHT_PLATFORM; + + oaktrail_backlight_device = backlight_device_register("oaktrail-bl", + NULL, (void *)dev, &oaktrail_ops, &props); + + if (IS_ERR(oaktrail_backlight_device)) + return PTR_ERR(oaktrail_backlight_device); + + ret = device_backlight_init(dev); + if (ret < 0) { + backlight_device_unregister(oaktrail_backlight_device); + return ret; + } + oaktrail_backlight_device->props.brightness = 100; + oaktrail_backlight_device->props.max_brightness = 100; + backlight_update_status(oaktrail_backlight_device); + dev_priv->backlight_device = oaktrail_backlight_device; + return 0; +} + +#endif + +/* + * Provide the Moorestown specific chip logic and low level methods + * for power management + */ + +static void oaktrail_init_pm(struct drm_device *dev) +{ +} + +/** + * oaktrail_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int oaktrail_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + int i; + u32 pp_stat; + + /* Display arbitration control + watermarks */ + dev_priv->saveDSPARB = PSB_RVDC32(DSPARB); + dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1); + dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2); + dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3); + dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4); + dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5); + dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6); + dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); + + /* Pipe & plane A info */ + dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF); + dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC); + dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0); + dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1); + dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A); + dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A); + dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A); + dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A); + dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A); + dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A); + dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A); + dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A); + dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR); + dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE); + dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE); + dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF); + dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF); + dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF); + + /* Save cursor regs */ + dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); + dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); + dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); + + /* Save palette (gamma) */ + for (i = 0; i < 256; i++) + dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_save(dev); + + /* Save performance state */ + dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE); + + /* LVDS state */ + dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); + dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS); + dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL); + dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2); + dev_priv->saveLVDS = PSB_RVDC32(LVDS); + dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); + dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON); + dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF); + dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE); + + /* HW overlay */ + dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD); + dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); + dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); + dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); + dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); + dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); + dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); + + /* DPST registers */ + dev_priv->saveHISTOGRAM_INT_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_INT_CONTROL); + dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); + dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC); + + if (dev_priv->iLVDS_enable) { + /* Shut down the panel */ + PSB_WVDC32(0, PP_CONTROL); + + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x80000000); + + /* Turn off the plane */ + PSB_WVDC32(0x58000000, DSPACNTR); + /* Trigger the plane disable */ + PSB_WVDC32(0, DSPASURF); + + /* Wait ~4 ticks */ + msleep(4); + + /* Turn off pipe */ + PSB_WVDC32(0x0, PIPEACONF); + /* Wait ~8 ticks */ + msleep(8); + + /* Turn off PLLs */ + PSB_WVDC32(0, MRST_DPLL_A); + } + return 0; +} + +/** + * oaktrail_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + */ +static int oaktrail_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pp_stat; + int i; + + /* Display arbitration + watermarks */ + PSB_WVDC32(dev_priv->saveDSPARB, DSPARB); + PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1); + PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2); + PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3); + PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4); + PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5); + PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6); + PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT); + + /* Make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + /* set the plls */ + PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0); + PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1); + + /* Actually enable it */ + PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A); + DRM_UDELAY(150); + + /* Restore mode */ + PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A); + PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A); + PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A); + PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A); + PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A); + PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A); + PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC); + PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A); + + /* Restore performance mode*/ + PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE); + + /* Enable the pipe*/ + if (dev_priv->iLVDS_enable) + PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF); + + /* Set up the plane*/ + PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF); + PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE); + PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF); + + /* Enable the plane */ + PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR); + PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF); + + /* Enable Cursor A */ + PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR); + PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS); + PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE); + + /* Restore palette (gamma) */ + for (i = 0; i < 256; i++) + PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_restore(dev); + + if (dev_priv->iLVDS_enable) { + PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2); + PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/ + PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL); + PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); + PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS); + PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL); + PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON); + PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF); + PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE); + PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL); + } + + /* Wait for cycle delay */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x08000000); + + /* Wait for panel power up */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x10000000); + + /* Restore HW overlay */ + PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD); + PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0); + PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1); + PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2); + PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3); + PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4); + PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5); + + /* DPST registers */ + PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG, + HISTOGRAM_INT_CONTROL); + PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG, + HISTOGRAM_LOGIC_CONTROL); + PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC); + + return 0; +} + +/** + * oaktrail_power_down - power down the display island + * @dev: our DRM device + * + * Power down the display interface of our device + */ +static int oaktrail_power_down(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_mask ; + u32 pwr_sts; + + pwr_mask = PSB_PWRGT_DISPLAY_MASK; + outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == pwr_mask) + break; + else + udelay(10); + } + return 0; +} + +/* + * oaktrail_power_up + * + * Restore power to the specified island(s) (powergating) + */ +static int oaktrail_power_up(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK; + u32 pwr_sts, pwr_cnt; + + pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); + pwr_cnt &= ~pwr_mask; + outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC)); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == 0) + break; + else + udelay(10); + } + return 0; +} + + +static void oaktrail_teardown(struct drm_device *dev) +{ + oaktrail_hdmi_teardown(dev); +} + +const struct psb_ops oaktrail_chip_ops = { + .name = "Oaktrail", + .accel_2d = 1, + .pipes = 2, + .crtcs = 2, + .sgx_offset = MRST_SGX_OFFSET, + + .chip_setup = mid_chip_setup, + .chip_teardown = oaktrail_teardown, + .crtc_helper = &oaktrail_helper_funcs, + .crtc_funcs = &psb_intel_crtc_funcs, + + .output_init = oaktrail_output_init, + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + .backlight_init = oaktrail_backlight_init, +#endif + + .init_pm = oaktrail_init_pm, + .save_regs = oaktrail_save_display_registers, + .restore_regs = oaktrail_restore_display_registers, + .power_down = oaktrail_power_down, + .power_up = oaktrail_power_up, + + .i2c_bus = 1, +}; diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c new file mode 100644 index 0000000..6f423c0 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c @@ -0,0 +1,852 @@ +/* + * Copyright © 2010 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Li Peng <peng.li@intel.com> + */ + +#include <drm/drmP.h> +#include <drm/drm.h> +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_drv.h" + +#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) +#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) + +#define HDMI_HCR 0x1000 +#define HCR_ENABLE_HDCP (1 << 5) +#define HCR_ENABLE_AUDIO (1 << 2) +#define HCR_ENABLE_PIXEL (1 << 1) +#define HCR_ENABLE_TMDS (1 << 0) + +#define HDMI_HICR 0x1004 +#define HDMI_HSR 0x1008 +#define HDMI_HISR 0x100C +#define HDMI_DETECT_HDP (1 << 0) + +#define HDMI_VIDEO_REG 0x3000 +#define HDMI_UNIT_EN (1 << 7) +#define HDMI_MODE_OUTPUT (1 << 0) +#define HDMI_HBLANK_A 0x3100 + +#define HDMI_AUDIO_CTRL 0x4000 +#define HDMI_ENABLE_AUDIO (1 << 0) + +#define PCH_HTOTAL_B 0x3100 +#define PCH_HBLANK_B 0x3104 +#define PCH_HSYNC_B 0x3108 +#define PCH_VTOTAL_B 0x310C +#define PCH_VBLANK_B 0x3110 +#define PCH_VSYNC_B 0x3114 +#define PCH_PIPEBSRC 0x311C + +#define PCH_PIPEB_DSL 0x3800 +#define PCH_PIPEB_SLC 0x3804 +#define PCH_PIPEBCONF 0x3808 +#define PCH_PIPEBSTAT 0x3824 + +#define CDVO_DFT 0x5000 +#define CDVO_SLEWRATE 0x5004 +#define CDVO_STRENGTH 0x5008 +#define CDVO_RCOMP 0x500C + +#define DPLL_CTRL 0x6000 +#define DPLL_PDIV_SHIFT 16 +#define DPLL_PDIV_MASK (0xf << 16) +#define DPLL_PWRDN (1 << 4) +#define DPLL_RESET (1 << 3) +#define DPLL_FASTEN (1 << 2) +#define DPLL_ENSTAT (1 << 1) +#define DPLL_DITHEN (1 << 0) + +#define DPLL_DIV_CTRL 0x6004 +#define DPLL_CLKF_MASK 0xffffffc0 +#define DPLL_CLKR_MASK (0x3f) + +#define DPLL_CLK_ENABLE 0x6008 +#define DPLL_EN_DISP (1 << 31) +#define DPLL_SEL_HDMI (1 << 8) +#define DPLL_EN_HDMI (1 << 1) +#define DPLL_EN_VGA (1 << 0) + +#define DPLL_ADJUST 0x600C +#define DPLL_STATUS 0x6010 +#define DPLL_UPDATE 0x6014 +#define DPLL_DFT 0x6020 + +struct intel_range { + int min, max; +}; + +struct oaktrail_hdmi_limit { + struct intel_range vco, np, nr, nf; +}; + +struct oaktrail_hdmi_clock { + int np; + int nr; + int nf; + int dot; +}; + +#define VCO_MIN 320000 +#define VCO_MAX 1650000 +#define NP_MIN 1 +#define NP_MAX 15 +#define NR_MIN 1 +#define NR_MAX 64 +#define NF_MIN 2 +#define NF_MAX 4095 + +static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = { + .vco = { .min = VCO_MIN, .max = VCO_MAX }, + .np = { .min = NP_MIN, .max = NP_MAX }, + .nr = { .min = NR_MIN, .max = NR_MAX }, + .nf = { .min = NF_MIN, .max = NF_MAX }, +}; + +static void wait_for_vblank(struct drm_device *dev) +{ + /* FIXME: Can we do this as a sleep ? */ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + mdelay(20); +} + +static void scu_busy_loop(void *scu_base) +{ + u32 status = 0; + u32 loop_count = 0; + + status = readl(scu_base + 0x04); + while (status & 1) { + udelay(1); /* scu processing time is in few u secods */ + status = readl(scu_base + 0x04); + loop_count++; + /* break if scu doesn't reset busy bit after huge retry */ + if (loop_count > 1000) { + DRM_DEBUG_KMS("SCU IPC timed out"); + return; + } + } +} + +static void oaktrail_hdmi_reset(struct drm_device *dev) +{ + void *base; + /* FIXME: at least make these defines */ + unsigned int scu_ipc_mmio = 0xff11c000; + int scu_len = 1024; + + base = ioremap((resource_size_t)scu_ipc_mmio, scu_len); + if (base == NULL) { + DRM_ERROR("failed to map SCU mmio\n"); + return; + } + + /* scu ipc: assert hdmi controller reset */ + writel(0xff11d118, base + 0x0c); + writel(0x7fffffdf, base + 0x80); + writel(0x42005, base + 0x0); + scu_busy_loop(base); + + /* scu ipc: de-assert hdmi controller reset */ + writel(0xff11d118, base + 0x0c); + writel(0x7fffffff, base + 0x80); + writel(0x42005, base + 0x0); + scu_busy_loop(base); + + iounmap(base); +} + +static void oaktrail_hdmi_audio_enable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + + HDMI_WRITE(HDMI_HCR, 0x67); + HDMI_READ(HDMI_HCR); + + HDMI_WRITE(0x51a8, 0x10); + HDMI_READ(0x51a8); + + HDMI_WRITE(HDMI_AUDIO_CTRL, 0x1); + HDMI_READ(HDMI_AUDIO_CTRL); +} + +static void oaktrail_hdmi_audio_disable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + + HDMI_WRITE(0x51a8, 0x0); + HDMI_READ(0x51a8); + + HDMI_WRITE(HDMI_AUDIO_CTRL, 0x0); + HDMI_READ(HDMI_AUDIO_CTRL); + + HDMI_WRITE(HDMI_HCR, 0x47); + HDMI_READ(HDMI_HCR); +} + +void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + u32 temp; + + switch (mode) { + case DRM_MODE_DPMS_OFF: + /* Disable VGACNTRL */ + REG_WRITE(VGACNTRL, 0x80000000); + + /* Disable plane */ + temp = REG_READ(DSPBCNTR); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE); + REG_READ(DSPBCNTR); + /* Flush the plane changes */ + REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); + REG_READ(DSPBSURF); + } + + /* Disable pipe B */ + temp = REG_READ(PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE); + REG_READ(PIPEBCONF); + } + + /* Disable LNW Pipes, etc */ + temp = REG_READ(PCH_PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE); + REG_READ(PCH_PIPEBCONF); + } + /* wait for pipe off */ + udelay(150); + /* Disable dpll */ + temp = REG_READ(DPLL_CTRL); + if ((temp & DPLL_PWRDN) == 0) { + REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET)); + REG_WRITE(DPLL_STATUS, 0x1); + } + /* wait for dpll off */ + udelay(150); + break; + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable dpll */ + temp = REG_READ(DPLL_CTRL); + if ((temp & DPLL_PWRDN) != 0) { + REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET)); + temp = REG_READ(DPLL_CLK_ENABLE); + REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI); + REG_READ(DPLL_CLK_ENABLE); + } + /* wait for dpll warm up */ + udelay(150); + + /* Enable pipe B */ + temp = REG_READ(PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE); + REG_READ(PIPEBCONF); + } + + /* Enable LNW Pipe B */ + temp = REG_READ(PCH_PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE); + REG_READ(PCH_PIPEBCONF); + } + wait_for_vblank(dev); + + /* Enable plane */ + temp = REG_READ(DSPBCNTR); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); + REG_READ(DSPBSURF); + } + psb_intel_crtc_load_lut(crtc); + } + /* DSPARB */ + REG_WRITE(DSPARB, 0x00003fbf); + /* FW1 */ + REG_WRITE(0x70034, 0x3f880a0a); + /* FW2 */ + REG_WRITE(0x70038, 0x0b060808); + /* FW4 */ + REG_WRITE(0x70050, 0x08030404); + /* FW5 */ + REG_WRITE(0x70054, 0x04040404); + /* LNC Chicken Bits */ + REG_WRITE(0x70400, 0x4000); +} + + +static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode) +{ + static int dpms_mode = -1; + + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + u32 temp; + + if (dpms_mode == mode) + return; + + if (mode != DRM_MODE_DPMS_ON) + temp = 0x0; + else + temp = 0x99; + + dpms_mode = mode; + HDMI_WRITE(HDMI_VIDEO_REG, temp); +} + +static unsigned int htotal_calculate(struct drm_display_mode *mode) +{ + u32 htotal, new_crtc_htotal; + + htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16); + + /* + * 1024 x 768 new_crtc_htotal = 0x1024; + * 1280 x 1024 new_crtc_htotal = 0x0c34; + */ + new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock; + + return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16); +} + +static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target, + int refclk, struct oaktrail_hdmi_clock *best_clock) +{ + int np_min, np_max, nr_min, nr_max; + int np, nr, nf; + + np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10); + np_max = oaktrail_hdmi_limit.vco.max / (target * 10); + if (np_min < oaktrail_hdmi_limit.np.min) + np_min = oaktrail_hdmi_limit.np.min; + if (np_max > oaktrail_hdmi_limit.np.max) + np_max = oaktrail_hdmi_limit.np.max; + + nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max)); + nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min)); + if (nr_min < oaktrail_hdmi_limit.nr.min) + nr_min = oaktrail_hdmi_limit.nr.min; + if (nr_max > oaktrail_hdmi_limit.nr.max) + nr_max = oaktrail_hdmi_limit.nr.max; + + np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max)); + nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np)); + nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk); + DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf); + + /* + * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000; + * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000; + */ + best_clock->np = np; + best_clock->nr = nr - 1; + best_clock->nf = (nf << 14); +} + +int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + int pipe = 1; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int refclk; + struct oaktrail_hdmi_clock clock; + u32 dspcntr, pipeconf, dpll, temp; + int dspcntr_reg = DSPBCNTR; + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* XXX: Disable the panel fitter if it was on our pipe */ + + /* Disable dpll if necessary */ + dpll = REG_READ(DPLL_CTRL); + if ((dpll & DPLL_PWRDN) == 0) { + REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET)); + REG_WRITE(DPLL_DIV_CTRL, 0x00000000); + REG_WRITE(DPLL_STATUS, 0x1); + } + udelay(150); + + /* reset controller: FIXME - can we sort out the ioremap mess ? */ + iounmap(hdmi_dev->regs); + oaktrail_hdmi_reset(dev); + + /* program and enable dpll */ + refclk = 25000; + oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock); + + /* Setting DPLL */ + dpll = REG_READ(DPLL_CTRL); + dpll &= ~DPLL_PDIV_MASK; + dpll &= ~(DPLL_PWRDN | DPLL_RESET); + REG_WRITE(DPLL_CTRL, 0x00000008); + REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr)); + REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1)); + REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN)); + REG_WRITE(DPLL_UPDATE, 0x80000000); + REG_WRITE(DPLL_CLK_ENABLE, 0x80050102); + udelay(150); + + hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); + if (hdmi_dev->regs == NULL) { + DRM_ERROR("failed to do hdmi mmio mapping\n"); + return -ENOMEM; + } + + /* configure HDMI */ + HDMI_WRITE(0x1004, 0x1fd); + HDMI_WRITE(0x2000, 0x1); + HDMI_WRITE(0x2008, 0x0); + HDMI_WRITE(0x3130, 0x8); + HDMI_WRITE(0x101c, 0x1800810); + + temp = htotal_calculate(adjusted_mode); + REG_WRITE(htot_reg, temp); + REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); + REG_WRITE(pipesrc_reg, + ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); + + REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); + REG_WRITE(PCH_PIPEBSRC, + ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); + + temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; + HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp); + + REG_WRITE(dspsize_reg, + ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + REG_WRITE(dsppos_reg, 0); + + /* Flush the plane changes */ + { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + /* Set up the display plane register */ + dspcntr = REG_READ(dspcntr_reg); + dspcntr |= DISPPLANE_GAMMA_ENABLE; + dspcntr |= DISPPLANE_SEL_PIPE_B; + dspcntr |= DISPLAY_PLANE_ENABLE; + + /* setup pipeconf */ + pipeconf = REG_READ(pipeconf_reg); + pipeconf |= PIPEACONF_ENABLE; + + REG_WRITE(pipeconf_reg, pipeconf); + REG_READ(pipeconf_reg); + + REG_WRITE(PCH_PIPEBCONF, pipeconf); + REG_READ(PCH_PIPEBCONF); + wait_for_vblank(dev); + + REG_WRITE(dspcntr_reg, dspcntr); + wait_for_vblank(dev); + + return 0; +} + +static int oaktrail_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + if (mode->clock < 20000) + return MODE_CLOCK_LOW; + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + return MODE_OK; +} + +static bool oaktrail_hdmi_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static enum drm_connector_status +oaktrail_hdmi_detect(struct drm_connector *connector, bool force) +{ + enum drm_connector_status status; + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + u32 temp; + + temp = HDMI_READ(HDMI_HSR); + DRM_DEBUG_KMS("HDMI_HSR %x\n", temp); + + if ((temp & HDMI_DETECT_HDP) != 0) + status = connector_status_connected; + else + status = connector_status_disconnected; + + return status; +} + +static const unsigned char raw_edid[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x10, 0xac, 0x2f, 0xa0, + 0x53, 0x55, 0x33, 0x30, 0x16, 0x13, 0x01, 0x03, 0x0e, 0x3a, 0x24, 0x78, + 0xea, 0xe9, 0xf5, 0xac, 0x51, 0x30, 0xb4, 0x25, 0x11, 0x50, 0x54, 0xa5, + 0x4b, 0x00, 0x81, 0x80, 0xa9, 0x40, 0x71, 0x4f, 0xb3, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x28, 0x3c, 0x80, 0xa0, 0x70, 0xb0, + 0x23, 0x40, 0x30, 0x20, 0x36, 0x00, 0x46, 0x6c, 0x21, 0x00, 0x00, 0x1a, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x47, 0x4e, 0x37, 0x32, 0x31, 0x39, 0x35, + 0x52, 0x30, 0x33, 0x55, 0x53, 0x0a, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x44, + 0x45, 0x4c, 0x4c, 0x20, 0x32, 0x37, 0x30, 0x39, 0x57, 0x0a, 0x20, 0x20, + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x38, 0x4c, 0x1e, 0x53, 0x11, 0x00, 0x0a, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x8d +}; + +static int oaktrail_hdmi_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct i2c_adapter *i2c_adap; + struct edid *edid; + struct drm_display_mode *mode, *t; + int i = 0, ret = 0; + + i2c_adap = i2c_get_adapter(3); + if (i2c_adap == NULL) { + DRM_ERROR("No ddc adapter available!\n"); + edid = (struct edid *)raw_edid; + } else { + edid = (struct edid *)raw_edid; + /* FIXME ? edid = drm_get_edid(connector, i2c_adap); */ + } + + if (edid) { + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + connector->display_info.raw_edid = NULL; + } + + /* + * prune modes that require frame buffer bigger than stolen mem + */ + list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { + if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) { + i++; + drm_mode_remove(connector, mode); + } + } + return ret - i; +} + +static void oaktrail_hdmi_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + + oaktrail_hdmi_audio_enable(dev); + return; +} + +static void oaktrail_hdmi_destroy(struct drm_connector *connector) +{ + return; +} + +static const struct drm_encoder_helper_funcs oaktrail_hdmi_helper_funcs = { + .dpms = oaktrail_hdmi_dpms, + .mode_fixup = oaktrail_hdmi_mode_fixup, + .prepare = psb_intel_encoder_prepare, + .mode_set = oaktrail_hdmi_mode_set, + .commit = psb_intel_encoder_commit, +}; + +static const struct drm_connector_helper_funcs + oaktrail_hdmi_connector_helper_funcs = { + .get_modes = oaktrail_hdmi_get_modes, + .mode_valid = oaktrail_hdmi_mode_valid, + .best_encoder = psb_intel_best_encoder, +}; + +static const struct drm_connector_funcs oaktrail_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = oaktrail_hdmi_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = oaktrail_hdmi_destroy, +}; + +static void oaktrail_hdmi_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs oaktrail_hdmi_enc_funcs = { + .destroy = oaktrail_hdmi_enc_destroy, +}; + +void oaktrail_hdmi_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct psb_intel_output *psb_intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + + psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); + if (!psb_intel_output) + return; + + psb_intel_output->mode_dev = mode_dev; + connector = &psb_intel_output->base; + encoder = &psb_intel_output->enc; + drm_connector_init(dev, &psb_intel_output->base, + &oaktrail_hdmi_connector_funcs, + DRM_MODE_CONNECTOR_DVID); + + drm_encoder_init(dev, &psb_intel_output->enc, + &oaktrail_hdmi_enc_funcs, + DRM_MODE_ENCODER_TMDS); + + drm_mode_connector_attach_encoder(&psb_intel_output->base, + &psb_intel_output->enc); + + psb_intel_output->type = INTEL_OUTPUT_HDMI; + drm_encoder_helper_add(encoder, &oaktrail_hdmi_helper_funcs); + drm_connector_helper_add(connector, &oaktrail_hdmi_connector_helper_funcs); + + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + drm_sysfs_connector_add(connector); + + return; +} + +static DEFINE_PCI_DEVICE_TABLE(hdmi_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080d) }, + {} +}; + +void oaktrail_hdmi_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct pci_dev *pdev; + struct oaktrail_hdmi_dev *hdmi_dev; + int ret; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x080d, NULL); + if (!pdev) + return; + + hdmi_dev = kzalloc(sizeof(struct oaktrail_hdmi_dev), GFP_KERNEL); + if (!hdmi_dev) { + dev_err(dev->dev, "failed to allocate memory\n"); + goto out; + } + + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev->dev, "failed to enable hdmi controller\n"); + goto free; + } + + hdmi_dev->mmio = pci_resource_start(pdev, 0); + hdmi_dev->mmio_len = pci_resource_len(pdev, 0); + hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); + if (!hdmi_dev->regs) { + dev_err(dev->dev, "failed to map hdmi mmio\n"); + goto free; + } + + hdmi_dev->dev = pdev; + pci_set_drvdata(pdev, hdmi_dev); + + /* Initialize i2c controller */ + ret = oaktrail_hdmi_i2c_init(hdmi_dev->dev); + if (ret) + dev_err(dev->dev, "HDMI I2C initialization failed\n"); + + dev_priv->hdmi_priv = hdmi_dev; + oaktrail_hdmi_audio_disable(dev); + return; + +free: + kfree(hdmi_dev); +out: + return; +} + +void oaktrail_hdmi_teardown(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + struct pci_dev *pdev; + + if (hdmi_dev) { + pdev = hdmi_dev->dev; + pci_set_drvdata(pdev, NULL); + oaktrail_hdmi_i2c_exit(pdev); + iounmap(hdmi_dev->regs); + kfree(hdmi_dev); + pci_dev_put(pdev); + } +} + +/* save HDMI register state */ +void oaktrail_hdmi_save(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + int i; + + /* dpll */ + hdmi_dev->saveDPLL_CTRL = PSB_RVDC32(DPLL_CTRL); + hdmi_dev->saveDPLL_DIV_CTRL = PSB_RVDC32(DPLL_DIV_CTRL); + hdmi_dev->saveDPLL_ADJUST = PSB_RVDC32(DPLL_ADJUST); + hdmi_dev->saveDPLL_UPDATE = PSB_RVDC32(DPLL_UPDATE); + hdmi_dev->saveDPLL_CLK_ENABLE = PSB_RVDC32(DPLL_CLK_ENABLE); + + /* pipe B */ + dev_priv->savePIPEBCONF = PSB_RVDC32(PIPEBCONF); + dev_priv->savePIPEBSRC = PSB_RVDC32(PIPEBSRC); + dev_priv->saveHTOTAL_B = PSB_RVDC32(HTOTAL_B); + dev_priv->saveHBLANK_B = PSB_RVDC32(HBLANK_B); + dev_priv->saveHSYNC_B = PSB_RVDC32(HSYNC_B); + dev_priv->saveVTOTAL_B = PSB_RVDC32(VTOTAL_B); + dev_priv->saveVBLANK_B = PSB_RVDC32(VBLANK_B); + dev_priv->saveVSYNC_B = PSB_RVDC32(VSYNC_B); + + hdmi_dev->savePCH_PIPEBCONF = PSB_RVDC32(PCH_PIPEBCONF); + hdmi_dev->savePCH_PIPEBSRC = PSB_RVDC32(PCH_PIPEBSRC); + hdmi_dev->savePCH_HTOTAL_B = PSB_RVDC32(PCH_HTOTAL_B); + hdmi_dev->savePCH_HBLANK_B = PSB_RVDC32(PCH_HBLANK_B); + hdmi_dev->savePCH_HSYNC_B = PSB_RVDC32(PCH_HSYNC_B); + hdmi_dev->savePCH_VTOTAL_B = PSB_RVDC32(PCH_VTOTAL_B); + hdmi_dev->savePCH_VBLANK_B = PSB_RVDC32(PCH_VBLANK_B); + hdmi_dev->savePCH_VSYNC_B = PSB_RVDC32(PCH_VSYNC_B); + + /* plane */ + dev_priv->saveDSPBCNTR = PSB_RVDC32(DSPBCNTR); + dev_priv->saveDSPBSTRIDE = PSB_RVDC32(DSPBSTRIDE); + dev_priv->saveDSPBADDR = PSB_RVDC32(DSPBBASE); + dev_priv->saveDSPBSURF = PSB_RVDC32(DSPBSURF); + dev_priv->saveDSPBLINOFF = PSB_RVDC32(DSPBLINOFF); + dev_priv->saveDSPBTILEOFF = PSB_RVDC32(DSPBTILEOFF); + + /* cursor B */ + dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR); + dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE); + dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS); + + /* save palette */ + for (i = 0; i < 256; i++) + dev_priv->save_palette_b[i] = PSB_RVDC32(PALETTE_B + (i << 2)); +} + +/* restore HDMI register state */ +void oaktrail_hdmi_restore(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + int i; + + /* dpll */ + PSB_WVDC32(hdmi_dev->saveDPLL_CTRL, DPLL_CTRL); + PSB_WVDC32(hdmi_dev->saveDPLL_DIV_CTRL, DPLL_DIV_CTRL); + PSB_WVDC32(hdmi_dev->saveDPLL_ADJUST, DPLL_ADJUST); + PSB_WVDC32(hdmi_dev->saveDPLL_UPDATE, DPLL_UPDATE); + PSB_WVDC32(hdmi_dev->saveDPLL_CLK_ENABLE, DPLL_CLK_ENABLE); + DRM_UDELAY(150); + + /* pipe */ + PSB_WVDC32(dev_priv->savePIPEBSRC, PIPEBSRC); + PSB_WVDC32(dev_priv->saveHTOTAL_B, HTOTAL_B); + PSB_WVDC32(dev_priv->saveHBLANK_B, HBLANK_B); + PSB_WVDC32(dev_priv->saveHSYNC_B, HSYNC_B); + PSB_WVDC32(dev_priv->saveVTOTAL_B, VTOTAL_B); + PSB_WVDC32(dev_priv->saveVBLANK_B, VBLANK_B); + PSB_WVDC32(dev_priv->saveVSYNC_B, VSYNC_B); + + PSB_WVDC32(hdmi_dev->savePCH_PIPEBSRC, PCH_PIPEBSRC); + PSB_WVDC32(hdmi_dev->savePCH_HTOTAL_B, PCH_HTOTAL_B); + PSB_WVDC32(hdmi_dev->savePCH_HBLANK_B, PCH_HBLANK_B); + PSB_WVDC32(hdmi_dev->savePCH_HSYNC_B, PCH_HSYNC_B); + PSB_WVDC32(hdmi_dev->savePCH_VTOTAL_B, PCH_VTOTAL_B); + PSB_WVDC32(hdmi_dev->savePCH_VBLANK_B, PCH_VBLANK_B); + PSB_WVDC32(hdmi_dev->savePCH_VSYNC_B, PCH_VSYNC_B); + + PSB_WVDC32(dev_priv->savePIPEBCONF, PIPEBCONF); + PSB_WVDC32(hdmi_dev->savePCH_PIPEBCONF, PCH_PIPEBCONF); + + /* plane */ + PSB_WVDC32(dev_priv->saveDSPBLINOFF, DSPBLINOFF); + PSB_WVDC32(dev_priv->saveDSPBSTRIDE, DSPBSTRIDE); + PSB_WVDC32(dev_priv->saveDSPBTILEOFF, DSPBTILEOFF); + PSB_WVDC32(dev_priv->saveDSPBCNTR, DSPBCNTR); + PSB_WVDC32(dev_priv->saveDSPBSURF, DSPBSURF); + + /* cursor B */ + PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR); + PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS); + PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE); + + /* restore palette */ + for (i = 0; i < 256; i++) + PSB_WVDC32(dev_priv->save_palette_b[i], PALETTE_B + (i << 2)); +} diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c new file mode 100644 index 0000000..d454e6f --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c @@ -0,0 +1,327 @@ +/* + * Copyright © 2010 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Li Peng <peng.li@intel.com> + */ + +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include "psb_drv.h" + +#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) +#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) + +#define HDMI_HCR 0x1000 +#define HCR_DETECT_HDP (1 << 6) +#define HCR_ENABLE_HDCP (1 << 5) +#define HCR_ENABLE_AUDIO (1 << 2) +#define HCR_ENABLE_PIXEL (1 << 1) +#define HCR_ENABLE_TMDS (1 << 0) +#define HDMI_HICR 0x1004 +#define HDMI_INTR_I2C_ERROR (1 << 4) +#define HDMI_INTR_I2C_FULL (1 << 3) +#define HDMI_INTR_I2C_DONE (1 << 2) +#define HDMI_INTR_HPD (1 << 0) +#define HDMI_HSR 0x1008 +#define HDMI_HISR 0x100C +#define HDMI_HI2CRDB0 0x1200 +#define HDMI_HI2CHCR 0x1240 +#define HI2C_HDCP_WRITE (0 << 2) +#define HI2C_HDCP_RI_READ (1 << 2) +#define HI2C_HDCP_READ (2 << 2) +#define HI2C_EDID_READ (3 << 2) +#define HI2C_READ_CONTINUE (1 << 1) +#define HI2C_ENABLE_TRANSACTION (1 << 0) + +#define HDMI_ICRH 0x1100 +#define HDMI_HI2CTDR0 0x1244 +#define HDMI_HI2CTDR1 0x1248 + +#define I2C_STAT_INIT 0 +#define I2C_READ_DONE 1 +#define I2C_TRANSACTION_DONE 2 + +struct hdmi_i2c_dev { + struct i2c_adapter *adap; + struct mutex i2c_lock; + struct completion complete; + int status; + struct i2c_msg *msg; + int buf_offset; +}; + +static void hdmi_i2c_irq_enable(struct oaktrail_hdmi_dev *hdmi_dev) +{ + u32 temp; + + temp = HDMI_READ(HDMI_HICR); + temp |= (HDMI_INTR_I2C_ERROR | HDMI_INTR_I2C_FULL | HDMI_INTR_I2C_DONE); + HDMI_WRITE(HDMI_HICR, temp); + HDMI_READ(HDMI_HICR); +} + +static void hdmi_i2c_irq_disable(struct oaktrail_hdmi_dev *hdmi_dev) +{ + HDMI_WRITE(HDMI_HICR, 0x0); + HDMI_READ(HDMI_HICR); +} + +static int xfer_read(struct i2c_adapter *adap, struct i2c_msg *pmsg) +{ + struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 temp; + + i2c_dev->status = I2C_STAT_INIT; + i2c_dev->msg = pmsg; + i2c_dev->buf_offset = 0; + INIT_COMPLETION(i2c_dev->complete); + + /* Enable I2C transaction */ + temp = ((pmsg->len) << 20) | HI2C_EDID_READ | HI2C_ENABLE_TRANSACTION; + HDMI_WRITE(HDMI_HI2CHCR, temp); + HDMI_READ(HDMI_HI2CHCR); + + while (i2c_dev->status != I2C_TRANSACTION_DONE) + wait_for_completion_interruptible_timeout(&i2c_dev->complete, + 10 * HZ); + + return 0; +} + +static int xfer_write(struct i2c_adapter *adap, struct i2c_msg *pmsg) +{ + /* + * XXX: i2c write seems isn't useful for EDID probe, don't do anything + */ + return 0; +} + +static int oaktrail_hdmi_i2c_access(struct i2c_adapter *adap, + struct i2c_msg *pmsg, + int num) +{ + struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + int i, err = 0; + + mutex_lock(&i2c_dev->i2c_lock); + + /* Enable i2c unit */ + HDMI_WRITE(HDMI_ICRH, 0x00008760); + + /* Enable irq */ + hdmi_i2c_irq_enable(hdmi_dev); + for (i = 0; i < num; i++) { + if (pmsg->len && pmsg->buf) { + if (pmsg->flags & I2C_M_RD) + err = xfer_read(adap, pmsg); + else + err = xfer_write(adap, pmsg); + } + pmsg++; /* next message */ + } + + /* Disable irq */ + hdmi_i2c_irq_disable(hdmi_dev); + + mutex_unlock(&i2c_dev->i2c_lock); + + return i; +} + +static u32 oaktrail_hdmi_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm oaktrail_hdmi_i2c_algorithm = { + .master_xfer = oaktrail_hdmi_i2c_access, + .functionality = oaktrail_hdmi_i2c_func, +}; + +static struct i2c_adapter oaktrail_hdmi_i2c_adapter = { + .name = "oaktrail_hdmi_i2c", + .nr = 3, + .owner = THIS_MODULE, + .class = I2C_CLASS_DDC, + .algo = &oaktrail_hdmi_i2c_algorithm, +}; + +static void hdmi_i2c_read(struct oaktrail_hdmi_dev *hdmi_dev) +{ + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + struct i2c_msg *msg = i2c_dev->msg; + u8 *buf = msg->buf; + u32 temp; + int i, offset; + + offset = i2c_dev->buf_offset; + for (i = 0; i < 0x10; i++) { + temp = HDMI_READ(HDMI_HI2CRDB0 + (i * 4)); + memcpy(buf + (offset + i * 4), &temp, 4); + } + i2c_dev->buf_offset += (0x10 * 4); + + /* clearing read buffer full intr */ + temp = HDMI_READ(HDMI_HISR); + HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_FULL); + HDMI_READ(HDMI_HISR); + + /* continue read transaction */ + temp = HDMI_READ(HDMI_HI2CHCR); + HDMI_WRITE(HDMI_HI2CHCR, temp | HI2C_READ_CONTINUE); + HDMI_READ(HDMI_HI2CHCR); + + i2c_dev->status = I2C_READ_DONE; + return; +} + +static void hdmi_i2c_transaction_done(struct oaktrail_hdmi_dev *hdmi_dev) +{ + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 temp; + + /* clear transaction done intr */ + temp = HDMI_READ(HDMI_HISR); + HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_DONE); + HDMI_READ(HDMI_HISR); + + + temp = HDMI_READ(HDMI_HI2CHCR); + HDMI_WRITE(HDMI_HI2CHCR, temp & ~HI2C_ENABLE_TRANSACTION); + HDMI_READ(HDMI_HI2CHCR); + + i2c_dev->status = I2C_TRANSACTION_DONE; + return; +} + +static irqreturn_t oaktrail_hdmi_i2c_handler(int this_irq, void *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev = dev; + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 stat; + + stat = HDMI_READ(HDMI_HISR); + + if (stat & HDMI_INTR_HPD) { + HDMI_WRITE(HDMI_HISR, stat | HDMI_INTR_HPD); + HDMI_READ(HDMI_HISR); + } + + if (stat & HDMI_INTR_I2C_FULL) + hdmi_i2c_read(hdmi_dev); + + if (stat & HDMI_INTR_I2C_DONE) + hdmi_i2c_transaction_done(hdmi_dev); + + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +/* + * choose alternate function 2 of GPIO pin 52, 53, + * which is used by HDMI I2C logic + */ +static void oaktrail_hdmi_i2c_gpio_fix(void) +{ + void *base; + unsigned int gpio_base = 0xff12c000; + int gpio_len = 0x1000; + u32 temp; + + base = ioremap((resource_size_t)gpio_base, gpio_len); + if (base == NULL) { + DRM_ERROR("gpio ioremap fail\n"); + return; + } + + temp = readl(base + 0x44); + DRM_DEBUG_DRIVER("old gpio val %x\n", temp); + writel((temp | 0x00000a00), (base + 0x44)); + temp = readl(base + 0x44); + DRM_DEBUG_DRIVER("new gpio val %x\n", temp); + + iounmap(base); +} + +int oaktrail_hdmi_i2c_init(struct pci_dev *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev; + struct hdmi_i2c_dev *i2c_dev; + int ret; + + hdmi_dev = pci_get_drvdata(dev); + + i2c_dev = kzalloc(sizeof(struct hdmi_i2c_dev), GFP_KERNEL); + if (i2c_dev == NULL) { + DRM_ERROR("Can't allocate interface\n"); + ret = -ENOMEM; + goto exit; + } + + i2c_dev->adap = &oaktrail_hdmi_i2c_adapter; + i2c_dev->status = I2C_STAT_INIT; + init_completion(&i2c_dev->complete); + mutex_init(&i2c_dev->i2c_lock); + i2c_set_adapdata(&oaktrail_hdmi_i2c_adapter, hdmi_dev); + hdmi_dev->i2c_dev = i2c_dev; + + /* Enable HDMI I2C function on gpio */ + oaktrail_hdmi_i2c_gpio_fix(); + + /* request irq */ + ret = request_irq(dev->irq, oaktrail_hdmi_i2c_handler, IRQF_SHARED, + oaktrail_hdmi_i2c_adapter.name, hdmi_dev); + if (ret) { + DRM_ERROR("Failed to request IRQ for I2C controller\n"); + goto err; + } + + /* Adapter registration */ + ret = i2c_add_numbered_adapter(&oaktrail_hdmi_i2c_adapter); + return ret; + +err: + kfree(i2c_dev); +exit: + return ret; +} + +void oaktrail_hdmi_i2c_exit(struct pci_dev *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev; + struct hdmi_i2c_dev *i2c_dev; + + hdmi_dev = pci_get_drvdata(dev); + if (i2c_del_adapter(&oaktrail_hdmi_i2c_adapter)) + DRM_DEBUG_DRIVER("Failed to delete hdmi-i2c adapter\n"); + + i2c_dev = hdmi_dev->i2c_dev; + kfree(i2c_dev); + free_irq(dev->irq, hdmi_dev); +} diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c new file mode 100644 index 0000000..a552226 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c @@ -0,0 +1,406 @@ +/* + * Copyright © 2006-2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <drm/drmP.h> +#include <asm/mrst.h> + +#include "intel_bios.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "power.h" +#include <linux/pm_runtime.h> + +/* The max/min PWM frequency in BPCR[31:17] - */ +/* The smallest number is 1 (not 0) that can fit in the + * 15-bit field of the and then*/ +/* shifts to the left by one bit to get the actual 16-bit + * value that the 15-bits correspond to.*/ +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BRIGHTNESS_MAX_LEVEL 100 + +/** + * Sets the power state for the panel. + */ +static void oaktrail_lvds_set_power(struct drm_device *dev, + struct psb_intel_output *output, bool on) +{ + u32 pp_status; + struct drm_psb_private *dev_priv = dev->dev_private; + + if (!gma_power_begin(dev, true)) + return; + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); + dev_priv->is_lvds_on = true; + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, true); + } else { + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, false); + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + dev_priv->is_lvds_on = false; + pm_request_idle(&dev->pdev->dev); + } + gma_power_end(dev); +} + +static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + + if (mode == DRM_MODE_DPMS_ON) + oaktrail_lvds_set_power(dev, output, true); + else + oaktrail_lvds_set_power(dev, output, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct psb_intel_mode_device *mode_dev = + enc_to_psb_intel_output(encoder)->mode_dev; + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + u32 lvds_port; + uint64_t v = DRM_MODE_SCALE_FULLSCREEN; + + if (!gma_power_begin(dev, true)) + return; + + /* + * The LVDS pin pair will already have been turned on in the + * psb_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + lvds_port = (REG_READ(LVDS) & + (~LVDS_PIPEB_SELECT)) | + LVDS_PORT_EN | + LVDS_BORDER_EN; + + /* If the firmware says dither on Moorestown, or the BIOS does + on Oaktrail then enable dithering */ + if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) + lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(LVDS, lvds_port); + + drm_connector_property_get_value( + &enc_to_psb_intel_output(encoder)->base, + dev->mode_config.scaling_mode_property, + &v); + + if (v == DRM_MODE_SCALE_NO_SCALE) + REG_WRITE(PFIT_CONTROL, 0); + else if (v == DRM_MODE_SCALE_ASPECT) { + if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || + (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { + if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == + (mode->hdisplay * adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + else if ((adjusted_mode->crtc_hdisplay * + mode->vdisplay) > (mode->hdisplay * + adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_PILLARBOX); + else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_LETTERBOX); + } else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + + gma_power_end(dev); +} + +static void oaktrail_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + struct psb_intel_mode_device *mode_dev = output->mode_dev; + + if (!gma_power_begin(dev, true)) + return; + + mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + oaktrail_lvds_set_power(dev, output, false); + gma_power_end(dev); +} + +static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 ret; + + if (gma_power_begin(dev, false)) { + ret = ((REG_READ(BLC_PWM_CTL) & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + gma_power_end(dev); + } else + ret = ((dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + return ret; +} + +static void oaktrail_lvds_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + struct psb_intel_mode_device *mode_dev = output->mode_dev; + + if (mode_dev->backlight_duty_cycle == 0) + mode_dev->backlight_duty_cycle = + oaktrail_lvds_get_max_backlight(dev); + oaktrail_lvds_set_power(dev, output, true); +} + +static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { + .dpms = oaktrail_lvds_dpms, + .mode_fixup = psb_intel_lvds_mode_fixup, + .prepare = oaktrail_lvds_prepare, + .mode_set = oaktrail_lvds_mode_set, + .commit = oaktrail_lvds_commit, +}; + +static struct drm_display_mode lvds_configuration_modes[] = { + /* hard coded fixed mode for TPO LTPS LPJ040K001A */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836, + 846, 1056, 0, 480, 489, 491, 525, 0, 0) }, + /* hard coded fixed mode for LVDS 800x480 */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801, + 802, 1024, 0, 480, 481, 482, 525, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072, + 1104, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104, + 1136, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124, + 1204, 1312, 0, 600, 607, 610, 621, 0, 0) }, + /* hard coded fixed mode for LVDS 1024x768 */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, 0) }, + /* hard coded fixed mode for LVDS 1366x768 */ + { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430, + 1558, 1664, 0, 768, 769, 770, 776, 0, 0) }, +}; + +/* Returns the panel fixed mode from configuration. */ + +static struct drm_display_mode * +oaktrail_lvds_get_configuration_mode(struct drm_device *dev) +{ + struct drm_display_mode *mode = NULL; + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; + + if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/ + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; + mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; + mode->hsync_start = mode->hdisplay + \ + ((ti->hsync_offset_hi << 8) | \ + ti->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + \ + ((ti->hsync_pulse_width_hi << 8) | \ + ti->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ + ti->hblank_lo); + mode->vsync_start = \ + mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ + ti->vsync_offset_lo); + mode->vsync_end = \ + mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ + ti->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + \ + ((ti->vblank_hi << 8) | ti->vblank_lo); + mode->clock = ti->pixel_clock * 10; +#if 0 + printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay); + printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay); + printk(KERN_INFO "HSS is %d\n", mode->hsync_start); + printk(KERN_INFO "HSE is %d\n", mode->hsync_end); + printk(KERN_INFO "htotal is %d\n", mode->htotal); + printk(KERN_INFO "VSS is %d\n", mode->vsync_start); + printk(KERN_INFO "VSE is %d\n", mode->vsync_end); + printk(KERN_INFO "vtotal is %d\n", mode->vtotal); + printk(KERN_INFO "clock is %d\n", mode->clock); +#endif + } else + mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]); + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +/** + * oaktrail_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void oaktrail_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct psb_intel_output *psb_intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_psb_private *dev_priv = + (struct drm_psb_private *) dev->dev_private; + struct edid *edid; + int ret = 0; + struct i2c_adapter *i2c_adap; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + + psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); + if (!psb_intel_output) + return; + + psb_intel_output->mode_dev = mode_dev; + connector = &psb_intel_output->base; + encoder = &psb_intel_output->enc; + dev_priv->is_lvds_on = true; + drm_connector_init(dev, &psb_intel_output->base, + &psb_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + drm_mode_connector_attach_encoder(&psb_intel_output->base, + &psb_intel_output->enc); + psb_intel_output->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); + drm_connector_helper_add(connector, + &psb_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_connector_attach_property(connector, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_connector_attach_property(connector, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + mode_dev->panel_wants_dither = false; + if (dev_priv->vbt_data.size != 0x00) + mode_dev->panel_wants_dither = (dev_priv->gct_data. + Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); + if (i2c_adap == NULL) + dev_err(dev->dev, "No ddc adapter available!\n"); + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + if (i2c_adap) { + edid = drm_get_edid(connector, i2c_adap); + if (edid) { + drm_mode_connector_update_edid_property(connector, + edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + } + /* + * If we didn't get EDID, try geting panel timing + * from configuration data + */ + mode_dev->panel_fixed_mode = oaktrail_lvds_get_configuration_mode(dev); + + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); + goto failed_find; + } + +out: + drm_sysfs_connector_add(connector); + return; + +failed_find: + dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); + if (psb_intel_output->ddc_bus) + psb_intel_i2c_destroy(psb_intel_output->ddc_bus); + +/* failed_ddc: */ + + drm_encoder_cleanup(encoder); + drm_connector_cleanup(connector); + kfree(connector); +} + |