Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.5.  I don't think I've missed
  anything too major, I'm mostly back at work now but I'll probably get
  some sleep in 5 years time.

  Summary:

  New drivers:
   - etnaviv:

     GPU driver for the 3D core on the Vivante core used in numerous
     ARM boards.

  Highlights:

  Core:
   - Atomic suspend/resume helpers
   - Move the headers to using userspace friendlier types.
   - Documentation updates
   - Lots of struct_mutex removal.
   - Bunch of DP MST fixes from AMD.

  Panel:
   - More DSI helpers
   - Support for some new basic panels

  i915:
   - Basic Kabylake support
   - DP link training and detect code refactoring
   - fbc/psr fixes
   - FIFO underrun fixes
   - SDE interrupt handling fixes
   - dma-buf/fence support in pageflip path.
   - GPU side for MST audio support

  radeon/amdgpu:
   - Drop UMS support
   - GPUVM/Scheduler optimisations
   - Initial Powerplay support for Tonga/Fiji/CZ/ST
   - ACP audio prerequisites

  nouveau:
   - GK20a instmem improvements
   - PCIE link speed change support

  msm:
   - DSI support for msm8960/apq8064

  tegra:
   - Host1X support for Tegra210 SoC

  vc4:
   - 3D acceleration support

  armada:
   - Get rid of struct mutex

  tda998x:
   - Atomic modesetting support
   - TMDS clock limitations

  omapdrm:
   - Atomic modesetting support
   - improved TILER performance

  rockchip:
   - RK3036 VOP support
   - Atomic modesetting support
   - Synopsys DW MIPI DSI support

  exynos:
   - Runtime PM support
   - of_graph binding for DP panels
   - Cleanup of IPP code
   - Configurable plane support
   - Kernel panic fixes at release time"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/amdgpu: add missing irq.h include
  drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
  drm/vmwgfx: Fix an incorrect lock check
  drm: nouveau: fix nouveau_debugfs_init prototype
  drm/nouveau/pci: fix check in nvkm_pcie_set_link
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/sysfs: use kobj_to_dev()
  ...

1 files changed, 72 insertions, 55 deletions

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index bfdf5bb..e714b5a 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -53,6 +53,9 @@
  * This helper library can be used independently of the modeset helper library.
  * Drivers can also overwrite different parts e.g. use their own hotplug
  * handling code to avoid probing unrelated outputs.
+ *
+ * The probe helpers share the function table structures with other display
+ * helper libraries. See struct &drm_connector_helper_funcs for the details.
  */
 
 static bool drm_kms_helper_poll = true;
@@ -126,9 +129,64 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked);
 
-
-static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connector *connector,
-							      uint32_t maxX, uint32_t maxY, bool merge_type_bits)
+/**
+ * drm_helper_probe_single_connector_modes - get complete set of display modes
+ * @connector: connector to probe
+ * @maxX: max width for modes
+ * @maxY: max height for modes
+ *
+ * Based on the helper callbacks implemented by @connector in struct
+ * &drm_connector_helper_funcs try to detect all valid modes.  Modes will first
+ * be added to the connector's probed_modes list, then culled (based on validity
+ * and the @maxX, @maxY parameters) and put into the normal modes list.
+ *
+ * Intended to be used as a generic implementation of the ->fill_modes()
+ * @connector vfunc for drivers that use the CRTC helpers for output mode
+ * filtering and detection.
+ *
+ * The basic procedure is as follows
+ *
+ * 1. All modes currently on the connector's modes list are marked as stale
+ *
+ * 2. New modes are added to the connector's probed_modes list with
+ *    drm_mode_probed_add(). New modes start their life with status as OK.
+ *    Modes are added from a single source using the following priority order.
+ *
+ *    - debugfs 'override_edid' (used for testing only)
+ *    - firmware EDID (drm_load_edid_firmware())
+ *    - connector helper ->get_modes() vfunc
+ *    - if the connector status is connector_status_connected, standard
+ *      VESA DMT modes up to 1024x768 are automatically added
+ *      (drm_add_modes_noedid())
+ *
+ *    Finally modes specified via the kernel command line (video=...) are
+ *    added in addition to what the earlier probes produced
+ *    (drm_helper_probe_add_cmdline_mode()). These modes are generated
+ *    using the VESA GTF/CVT formulas.
+ *
+ * 3. Modes are moved from the probed_modes list to the modes list. Potential
+ *    duplicates are merged together (see drm_mode_connector_list_update()).
+ *    After this step the probed_modes list will be empty again.
+ *
+ * 4. Any non-stale mode on the modes list then undergoes validation
+ *
+ *    - drm_mode_validate_basic() performs basic sanity checks
+ *    - drm_mode_validate_size() filters out modes larger than @maxX and @maxY
+ *      (if specified)
+ *    - drm_mode_validate_flag() checks the modes againt basic connector
+ *      capabilites (interlace_allowed,doublescan_allowed,stereo_allowed)
+ *    - the optional connector ->mode_valid() helper can perform driver and/or
+ *      hardware specific checks
+ *
+ * 5. Any mode whose status is not OK is pruned from the connector's modes list,
+ *    accompanied by a debug message indicating the reason for the mode's
+ *    rejection (see drm_mode_prune_invalid()).
+ *
+ * Returns:
+ * The number of modes found on @connector.
+ */
+int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+					    uint32_t maxX, uint32_t maxY)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode;
@@ -143,9 +201,9 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
 			connector->name);
-	/* set all modes to the unverified state */
+	/* set all old modes to the stale state */
 	list_for_each_entry(mode, &connector->modes, head)
-		mode->status = MODE_UNVERIFIED;
+		mode->status = MODE_STALE;
 
 	old_status = connector->status;
 
@@ -200,17 +258,16 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
 		goto prune;
 	}
 
+	if (connector->override_edid) {
+		struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
+
+		count = drm_add_edid_modes(connector, edid);
+		drm_edid_to_eld(connector, edid);
+	} else {
 #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
-	count = drm_load_edid_firmware(connector);
-	if (count == 0)
+		count = drm_load_edid_firmware(connector);
+		if (count == 0)
 #endif
-	{
-		if (connector->override_edid) {
-			struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
-
-			count = drm_add_edid_modes(connector, edid);
-			drm_edid_to_eld(connector, edid);
-		} else
 			count = (*connector_funcs->get_modes)(connector);
 	}
 
@@ -220,7 +277,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
 	if (count == 0)
 		goto prune;
 
-	drm_mode_connector_list_update(connector, merge_type_bits);
+	drm_mode_connector_list_update(connector);
 
 	if (connector->interlace_allowed)
 		mode_flags |= DRM_MODE_FLAG_INTERLACE;
@@ -264,49 +321,9 @@ prune:
 
 	return count;
 }
-
-/**
- * drm_helper_probe_single_connector_modes - get complete set of display modes
- * @connector: connector to probe
- * @maxX: max width for modes
- * @maxY: max height for modes
- *
- * Based on the helper callbacks implemented by @connector try to detect all
- * valid modes.  Modes will first be added to the connector's probed_modes list,
- * then culled (based on validity and the @maxX, @maxY parameters) and put into
- * the normal modes list.
- *
- * Intended to be use as a generic implementation of the ->fill_modes()
- * @connector vfunc for drivers that use the crtc helpers for output mode
- * filtering and detection.
- *
- * Returns:
- * The number of modes found on @connector.
- */
-int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
-					    uint32_t maxX, uint32_t maxY)
-{
-	return drm_helper_probe_single_connector_modes_merge_bits(connector, maxX, maxY, true);
-}
 EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
 
 /**
- * drm_helper_probe_single_connector_modes_nomerge - get complete set of display modes
- * @connector: connector to probe
- * @maxX: max width for modes
- * @maxY: max height for modes
- *
- * This operates like drm_hehlper_probe_single_connector_modes except it
- * replaces the mode bits instead of merging them for preferred modes.
- */
-int drm_helper_probe_single_connector_modes_nomerge(struct drm_connector *connector,
-					    uint32_t maxX, uint32_t maxY)
-{
-	return drm_helper_probe_single_connector_modes_merge_bits(connector, maxX, maxY, false);
-}
-EXPORT_SYMBOL(drm_helper_probe_single_connector_modes_nomerge);
-
-/**
  * drm_kms_helper_hotplug_event - fire off KMS hotplug events
  * @dev: drm_device whose connector state changed
  *