FMC: add a driver to write mezzanine EEPROM

This driver allows to reprogram the EEPROM in a mezzanine, to store
its own identifiers during manufacturing or to save other useful data.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: Emilio G. Cota <cota@braap.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 185 insertions, 0 deletions

diff --git a/drivers/fmc/Kconfig b/drivers/fmc/Kconfig
index 7eacef9..2bb1953 100644
--- a/drivers/fmc/Kconfig
+++ b/drivers/fmc/Kconfig
@@ -32,4 +32,12 @@ config FMC_TRIVIAL
 	  The driver also handles interrupts (we used it with a real carrier
 	  before the mezzanines were produced)
 
+config FMC_WRITE_EEPROM
+	tristate "FMC mezzanine driver to write I2C EEPROM"
+	help
+	  This driver matches every mezzanine device and can write the
+	  internal EEPROM of the PCB, using the firmware loader to get
+	  its binary and the function carrier->reprogram to actually do it.
+	  It is useful when the mezzanines are produced.
+
 endif # FMC
diff --git a/drivers/fmc/Makefile b/drivers/fmc/Makefile
index 52624e6..13701fa 100644
--- a/drivers/fmc/Makefile
+++ b/drivers/fmc/Makefile
@@ -9,3 +9,4 @@ fmc-y += fmc-dump.o
 
 obj-$(CONFIG_FMC_FAKEDEV) += fmc-fakedev.o
 obj-$(CONFIG_FMC_TRIVIAL) += fmc-trivial.o
+obj-$(CONFIG_FMC_WRITE_EEPROM) += fmc-write-eeprom.o
diff --git a/drivers/fmc/fmc-write-eeprom.c b/drivers/fmc/fmc-write-eeprom.c
new file mode 100644
index 0000000..2cc680d
--- /dev/null
+++ b/drivers/fmc/fmc-write-eeprom.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2012 CERN (www.cern.ch)
+ * Author: Alessandro Rubini <rubini@gnudd.com>
+ *
+ * Released according to the GNU GPL, version 2 or any later version.
+ *
+ * This work is part of the White Rabbit project, a research effort led
+ * by CERN, the European Institute for Nuclear Research.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/fmc.h>
+#include <asm/unaligned.h>
+
+/*
+ * This module uses the firmware loader to program the whole or part
+ * of the FMC eeprom. The meat is in the _run functions.  However, no
+ * default file name is provided, to avoid accidental mishaps. Also,
+ * you must pass the busid argument
+ */
+static struct fmc_driver fwe_drv;
+
+FMC_PARAM_BUSID(fwe_drv);
+
+/* The "file=" is like the generic "gateware=" used elsewhere */
+static char *fwe_file[FMC_MAX_CARDS];
+static int fwe_file_n;
+module_param_array_named(file, fwe_file, charp, &fwe_file_n, 444);
+
+static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
+	int write)
+{
+	const uint8_t *p = fw->data;
+	int len = fw->size;
+	uint16_t thislen, thisaddr;
+	int err;
+
+	/* format is: 'w' addr16 len16 data... */
+	while (len > 5) {
+		thisaddr = get_unaligned_le16(p+1);
+		thislen = get_unaligned_le16(p+3);
+		if (p[0] != 'w' || thislen + 5 > len) {
+			dev_err(&fmc->dev, "invalid tlv at offset %ti\n",
+				p - fw->data);
+			return -EINVAL;
+		}
+		err = 0;
+		if (write) {
+			dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
+				 thislen, thisaddr);
+			err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
+		}
+		if (err < 0) {
+			dev_err(&fmc->dev, "write failure @0x%04x\n",
+				thisaddr);
+			return err;
+		}
+		p += 5 + thislen;
+		len -= 5 + thislen;
+	}
+	if (write)
+		dev_info(&fmc->dev, "write_eeprom: success\n");
+	return 0;
+}
+
+static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
+{
+	int ret;
+
+	dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
+	ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
+	if (ret < 0) {
+		dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
+		return ret;
+	}
+	dev_info(&fmc->dev, "write_eeprom: success\n");
+	return 0;
+}
+
+static int fwe_run(struct fmc_device *fmc, const struct firmware *fw, char *s)
+{
+	char *last4 = s + strlen(s) - 4;
+	int err;
+
+	if (!strcmp(last4, ".bin"))
+		return fwe_run_bin(fmc, fw);
+	if (!strcmp(last4, ".tlv")) {
+		err = fwe_run_tlv(fmc, fw, 0);
+		if (!err)
+			err = fwe_run_tlv(fmc, fw, 1);
+		return err;
+	}
+	dev_err(&fmc->dev, "invalid file name \"%s\"\n", s);
+	return -EINVAL;
+}
+
+/*
+ * Programming is done at probe time. Morever, only those listed with
+ * busid= are programmed.
+ * card is probed for, only one is programmed. Unfortunately, it's
+ * difficult to know in advance when probing the first card if others
+ * are there.
+ */
+int fwe_probe(struct fmc_device *fmc)
+{
+	int err, index = 0;
+	const struct firmware *fw;
+	struct device *dev = &fmc->dev;
+	char *s;
+
+	if (!fwe_drv.busid_n) {
+		dev_err(dev, "%s: no busid passed, refusing all cards\n",
+			KBUILD_MODNAME);
+		return -ENODEV;
+	}
+	if (fmc->op->validate)
+		index = fmc->op->validate(fmc, &fwe_drv);
+	if (index < 0) {
+		pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
+		       dev_name(dev));
+		return -ENODEV;
+	}
+	if (index >= fwe_file_n) {
+		pr_err("%s: no filename for device index %i\n",
+			KBUILD_MODNAME, index);
+		return -ENODEV;
+	}
+	s = fwe_file[index];
+	if (!s) {
+		pr_err("%s: no filename for \"%s\" not programming\n",
+		       KBUILD_MODNAME, dev_name(dev));
+		return -ENOENT;
+	}
+	err = request_firmware(&fw, s, dev);
+	if (err < 0) {
+		dev_err(&fmc->dev, "request firmware \"%s\": error %i\n",
+			s, err);
+		return err;
+	}
+	fwe_run(fmc, fw, s);
+	release_firmware(fw);
+	return 0;
+}
+
+int fwe_remove(struct fmc_device *fmc)
+{
+	return 0;
+}
+
+static struct fmc_driver fwe_drv = {
+	.version = FMC_VERSION,
+	.driver.name = KBUILD_MODNAME,
+	.probe = fwe_probe,
+	.remove = fwe_remove,
+	/* no table, as the current match just matches everything */
+};
+
+static int fwe_init(void)
+{
+	int ret;
+
+	ret = fmc_driver_register(&fwe_drv);
+	return ret;
+}
+
+static void fwe_exit(void)
+{
+	fmc_driver_unregister(&fwe_drv);
+}
+
+module_init(fwe_init);
+module_exit(fwe_exit);
+
+MODULE_LICENSE("GPL");