diff options
author | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2007-11-07 01:11:56 +0100 |
---|---|---|
committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2007-11-07 01:59:28 +0100 |
commit | 7c45d1913f0a1d597eb4bc3b2c962bc2967da9ea (patch) | |
tree | 49a6bd70e0d221ba6456d6a3c2e403e7d5f5bfaf /drivers/firewire | |
parent | dbeeb816e805091e7cfc03baf36dc40b4adb2bbd (diff) | |
download | op-kernel-dev-7c45d1913f0a1d597eb4bc3b2c962bc2967da9ea.zip op-kernel-dev-7c45d1913f0a1d597eb4bc3b2c962bc2967da9ea.tar.gz |
firewire: fw-sbp2: fix refcounting
Since patch "fw-sbp2: use an own workqueue (fix system responsiveness)"
increased parallelism between fw-sbp2 and fw-core, it was possible that
fw-sbp2 didn't release the SCSI device when the FireWire device was
disconnected.
This happened if sbp2_update() ran during sbp2_login(), because a bus
reset occurred during sbp2_login(). The sbp2_login() work would [try
to] reschedule itself because it failed due to the bus reset, and it
would _not_ drop its reference on the target. However, sbp2_update()
would schedule sbp2_login() too before sbp2_login() rescheduled itself
and hence sbp2_update() would take an additional reference. And then
we would have one reference too many.
The fix is to _always_ drop the reference when leaving the sbp2_login()
work. If the sbp2_login() work reschedules itself, it takes a
reference, but only if it wasn't already rescheduled by sbp2_update().
Ditto in the sbp2_reconnect() work.
The resulting code is actually simpler than before: We _always_ take
a reference when successfully scheduling work. And we _always_ drop
a reference when leaving a workqueue job. No exceptions.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire')
-rw-r--r-- | drivers/firewire/fw-sbp2.c | 11 |
1 files changed, 7 insertions, 4 deletions
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 5596df6..624ff3e 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -650,13 +650,14 @@ static void sbp2_login(struct work_struct *work) if (sbp2_send_management_orb(lu, node_id, generation, SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) { if (lu->retries++ < 5) { - queue_delayed_work(sbp2_wq, &lu->work, - DIV_ROUND_UP(HZ, 5)); + if (queue_delayed_work(sbp2_wq, &lu->work, + DIV_ROUND_UP(HZ, 5))) + kref_get(&lu->tgt->kref); } else { fw_error("failed to login to %s LUN %04x\n", unit->device.bus_id, lu->lun); - kref_put(&lu->tgt->kref, sbp2_release_target); } + kref_put(&lu->tgt->kref, sbp2_release_target); return; } @@ -914,7 +915,9 @@ static void sbp2_reconnect(struct work_struct *work) lu->retries = 0; PREPARE_DELAYED_WORK(&lu->work, sbp2_login); } - queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5)); + if (queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5))) + kref_get(&lu->tgt->kref); + kref_put(&lu->tgt->kref, sbp2_release_target); return; } |