Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...

5 files changed, 1972 insertions, 559 deletions

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 07122a9..5168a13 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -29,7 +29,7 @@ config EXTCON_ADC_JACK
 
 config EXTCON_MAX77693
 	tristate "MAX77693 EXTCON Support"
-	depends on MFD_MAX77693
+	depends on MFD_MAX77693 && INPUT
 	select IRQ_DOMAIN
 	select REGMAP_I2C
 	help
@@ -47,7 +47,7 @@ config EXTCON_MAX8997
 
 config EXTCON_ARIZONA
 	tristate "Wolfson Arizona EXTCON support"
-	depends on MFD_ARIZONA && INPUT
+	depends on MFD_ARIZONA && INPUT && SND_SOC
 	help
 	  Say Y here to enable support for external accessory detection
 	  with Wolfson Arizona devices. These are audio CODECs with
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 414aed5..dc357a4 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -27,12 +27,18 @@
 #include <linux/regulator/consumer.h>
 #include <linux/extcon.h>
 
+#include <sound/soc.h>
+
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
 #define ARIZONA_NUM_BUTTONS 6
 
+#define ARIZONA_ACCDET_MODE_MIC 0
+#define ARIZONA_ACCDET_MODE_HPL 1
+#define ARIZONA_ACCDET_MODE_HPR 2
+
 struct arizona_extcon_info {
 	struct device *dev;
 	struct arizona *arizona;
@@ -45,17 +51,28 @@ struct arizona_extcon_info {
 	int micd_num_modes;
 
 	bool micd_reva;
+	bool micd_clamp;
+
+	struct delayed_work hpdet_work;
+
+	bool hpdet_active;
+	bool hpdet_done;
+
+	int num_hpdet_res;
+	unsigned int hpdet_res[3];
 
 	bool mic;
 	bool detecting;
 	int jack_flips;
 
+	int hpdet_ip;
+
 	struct extcon_dev edev;
 };
 
 static const struct arizona_micd_config micd_default_modes[] = {
-	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
 	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
+	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
 };
 
 static struct {
@@ -73,11 +90,13 @@ static struct {
 #define ARIZONA_CABLE_MECHANICAL 0
 #define ARIZONA_CABLE_MICROPHONE 1
 #define ARIZONA_CABLE_HEADPHONE  2
+#define ARIZONA_CABLE_LINEOUT    3
 
 static const char *arizona_cable[] = {
 	"Mechanical",
 	"Microphone",
 	"Headphone",
+	"Line-out",
 	NULL,
 };
 
@@ -85,8 +104,9 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 {
 	struct arizona *arizona = info->arizona;
 
-	gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
-				info->micd_modes[mode].gpio);
+	if (arizona->pdata.micd_pol_gpio > 0)
+		gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
+					info->micd_modes[mode].gpio);
 	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 			   ARIZONA_MICD_BIAS_SRC_MASK,
 			   info->micd_modes[mode].bias);
@@ -98,19 +118,70 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
 }
 
+static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
+{
+	switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) {
+	case 1:
+		return "MICBIAS1";
+	case 2:
+		return "MICBIAS2";
+	case 3:
+		return "MICBIAS3";
+	default:
+		return "MICVDD";
+	}
+}
+
+static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	const char *widget = arizona_extcon_get_micbias(info);
+	struct snd_soc_dapm_context *dapm = arizona->dapm;
+	int ret;
+
+	mutex_lock(&dapm->card->dapm_mutex);
+
+	ret = snd_soc_dapm_force_enable_pin(dapm, widget);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to enable %s: %d\n",
+			 widget, ret);
+
+	mutex_unlock(&dapm->card->dapm_mutex);
+
+	snd_soc_dapm_sync(dapm);
+
+	if (!arizona->pdata.micd_force_micbias) {
+		mutex_lock(&dapm->card->dapm_mutex);
+
+		ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to disable %s: %d\n",
+				 widget, ret);
+
+		mutex_unlock(&dapm->card->dapm_mutex);
+
+		snd_soc_dapm_sync(dapm);
+	}
+}
+
 static void arizona_start_mic(struct arizona_extcon_info *info)
 {
 	struct arizona *arizona = info->arizona;
 	bool change;
 	int ret;
 
-	info->detecting = true;
-	info->mic = false;
-	info->jack_flips = 0;
-
 	/* Microphone detection can't use idle mode */
 	pm_runtime_get(info->dev);
 
+	if (info->detecting) {
+		ret = regulator_allow_bypass(info->micvdd, false);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to regulate MICVDD: %d\n",
+				ret);
+		}
+	}
+
 	ret = regulator_enable(info->micvdd);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
@@ -123,6 +194,12 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
 		regmap_write(arizona->regmap, 0x80, 0x0);
 	}
 
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+
+	arizona_extcon_pulse_micbias(info);
+
 	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
 				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
 				 &change);
@@ -135,18 +212,39 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
 static void arizona_stop_mic(struct arizona_extcon_info *info)
 {
 	struct arizona *arizona = info->arizona;
+	const char *widget = arizona_extcon_get_micbias(info);
+	struct snd_soc_dapm_context *dapm = arizona->dapm;
 	bool change;
+	int ret;
 
 	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
 				 ARIZONA_MICD_ENA, 0,
 				 &change);
 
+	mutex_lock(&dapm->card->dapm_mutex);
+
+	ret = snd_soc_dapm_disable_pin(dapm, widget);
+	if (ret != 0)
+		dev_warn(arizona->dev,
+			 "Failed to disable %s: %d\n",
+			 widget, ret);
+
+	mutex_unlock(&dapm->card->dapm_mutex);
+
+	snd_soc_dapm_sync(dapm);
+
 	if (info->micd_reva) {
 		regmap_write(arizona->regmap, 0x80, 0x3);
 		regmap_write(arizona->regmap, 0x294, 2);
 		regmap_write(arizona->regmap, 0x80, 0x0);
 	}
 
+	ret = regulator_allow_bypass(info->micvdd, true);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+			ret);
+	}
+
 	if (change) {
 		regulator_disable(info->micvdd);
 		pm_runtime_mark_last_busy(info->dev);
@@ -154,6 +252,478 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
 	}
 }
 
+static struct {
+	unsigned int factor_a;
+	unsigned int factor_b;
+} arizona_hpdet_b_ranges[] = {
+	{  5528,   362464 },
+	{ 11084,  6186851 },
+	{ 11065, 65460395 },
+};
+
+static struct {
+	int min;
+	int max;
+} arizona_hpdet_c_ranges[] = {
+	{ 0,       30 },
+	{ 8,      100 },
+	{ 100,   1000 },
+	{ 1000, 10000 },
+};
+
+static int arizona_hpdet_read(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val, range;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
+			ret);
+		return ret;
+	}
+
+	switch (info->hpdet_ip) {
+	case 0:
+		if (!(val & ARIZONA_HP_DONE)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		val &= ARIZONA_HP_LVL_MASK;
+		break;
+
+	case 1:
+		if (!(val & ARIZONA_HP_DONE_B)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to read HP value: %d\n",
+				ret);
+			return -EAGAIN;
+		}
+
+		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+			    &range);
+		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
+			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
+
+		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
+		    (val < 100 || val > 0x3fb)) {
+			range++;
+			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
+				range);
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+					   range <<
+					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+			return -EAGAIN;
+		}
+
+		/* If we go out of range report top of range */
+		if (val < 100 || val > 0x3fb) {
+			dev_dbg(arizona->dev, "Measurement out of range\n");
+			return 10000;
+		}
+
+		dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
+			val, range);
+
+		val = arizona_hpdet_b_ranges[range].factor_b
+			/ ((val * 100) -
+			   arizona_hpdet_b_ranges[range].factor_a);
+		break;
+
+	default:
+		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
+			 info->hpdet_ip);
+	case 2:
+		if (!(val & ARIZONA_HP_DONE_B)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		val &= ARIZONA_HP_LVL_B_MASK;
+
+		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+			    &range);
+		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
+			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
+
+		/* Skip up or down a range? */
+		if (range && (val < arizona_hpdet_c_ranges[range].min)) {
+			range--;
+			dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
+				arizona_hpdet_c_ranges[range].min,
+				arizona_hpdet_c_ranges[range].max);
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+					   range <<
+					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+			return -EAGAIN;
+		}
+
+		if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
+		    (val >= arizona_hpdet_c_ranges[range].max)) {
+			range++;
+			dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
+				arizona_hpdet_c_ranges[range].min,
+				arizona_hpdet_c_ranges[range].max);
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+					   range <<
+					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+			return -EAGAIN;
+		}
+	}
+
+	dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
+	return val;
+}
+
+static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
+{
+	struct arizona *arizona = info->arizona;
+	int id_gpio = arizona->pdata.hpdet_id_gpio;
+
+	/*
+	 * If we're using HPDET for accessory identification we need
+	 * to take multiple measurements, step through them in sequence.
+	 */
+	if (arizona->pdata.hpdet_acc_id) {
+		info->hpdet_res[info->num_hpdet_res++] = *reading;
+
+		/*
+		 * If the impedence is too high don't measure the
+		 * second ground.
+		 */
+		if (info->num_hpdet_res == 1 && *reading >= 45) {
+			dev_dbg(arizona->dev, "Skipping ground flip\n");
+			info->hpdet_res[info->num_hpdet_res++] = *reading;
+		}
+
+		if (info->num_hpdet_res == 1) {
+			dev_dbg(arizona->dev, "Flipping ground\n");
+
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_ACCESSORY_DETECT_MODE_1,
+					   ARIZONA_ACCDET_SRC,
+					   ~info->micd_modes[0].src);
+
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+			return -EAGAIN;
+		}
+
+		/* Only check the mic directly if we didn't already ID it */
+		if (id_gpio && info->num_hpdet_res == 2 &&
+		    !((info->hpdet_res[0] > info->hpdet_res[1] * 2))) {
+			dev_dbg(arizona->dev, "Measuring mic\n");
+
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_ACCESSORY_DETECT_MODE_1,
+					   ARIZONA_ACCDET_MODE_MASK |
+					   ARIZONA_ACCDET_SRC,
+					   ARIZONA_ACCDET_MODE_HPR |
+					   info->micd_modes[0].src);
+
+			gpio_set_value_cansleep(id_gpio, 1);
+
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+			return -EAGAIN;
+		}
+
+		/* OK, got both.  Now, compare... */
+		dev_dbg(arizona->dev, "HPDET measured %d %d %d\n",
+			info->hpdet_res[0], info->hpdet_res[1],
+			info->hpdet_res[2]);
+
+
+		/* Take the headphone impedance for the main report */
+		*reading = info->hpdet_res[0];
+
+		/*
+		 * Either the two grounds measure differently or we
+		 * measure the mic as high impedance.
+		 */
+		if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) ||
+		    (id_gpio && info->hpdet_res[2] > 10)) {
+			dev_dbg(arizona->dev, "Detected mic\n");
+			info->mic = true;
+			info->detecting = true;
+		} else {
+			dev_dbg(arizona->dev, "Detected headphone\n");
+		}
+
+		/* Make sure everything is reset back to the real polarity */
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_ACCESSORY_DETECT_MODE_1,
+				   ARIZONA_ACCDET_SRC,
+				   info->micd_modes[0].src);
+	}
+
+	return 0;
+}
+
+static irqreturn_t arizona_hpdet_irq(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	int id_gpio = arizona->pdata.hpdet_id_gpio;
+	int report = ARIZONA_CABLE_HEADPHONE;
+	unsigned int val;
+	int ret, reading;
+
+	mutex_lock(&info->lock);
+
+	/* If we got a spurious IRQ for some reason then ignore it */
+	if (!info->hpdet_active) {
+		dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
+		mutex_unlock(&info->lock);
+		return IRQ_NONE;
+	}
+
+	/* If the cable was removed while measuring ignore the result */
+	ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n",
+			ret);
+		goto out;
+	} else if (!ret) {
+		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
+		goto done;
+	}
+
+	ret = arizona_hpdet_read(info);
+	if (ret == -EAGAIN) {
+		goto out;
+	} else if (ret < 0) {
+		goto done;
+	}
+	reading = ret;
+
+	/* Reset back to starting range */
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_HEADPHONE_DETECT_1,
+			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+			   0);
+
+	ret = arizona_hpdet_do_id(info, &reading);
+	if (ret == -EAGAIN) {
+		goto out;
+	} else if (ret < 0) {
+		goto done;
+	}
+
+	/* Report high impedence cables as line outputs */
+	if (reading >= 5000)
+		report = ARIZONA_CABLE_LINEOUT;
+	else
+		report = ARIZONA_CABLE_HEADPHONE;
+
+	ret = extcon_set_cable_state_(&info->edev, report, true);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
+			ret);
+
+	mutex_lock(&arizona->dapm->card->dapm_mutex);
+
+	ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read output enables: %d\n",
+			ret);
+		val = 0;
+	}
+
+	if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
+		ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to undo magic: %d\n",
+				 ret);
+
+		ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to undo magic: %d\n",
+				 ret);
+	}
+
+	mutex_unlock(&arizona->dapm->card->dapm_mutex);
+
+done:
+	if (id_gpio)
+		gpio_set_value_cansleep(id_gpio, 0);
+
+	/* Revert back to MICDET mode */
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+
+	/* If we have a mic then reenable MICDET */
+	if (info->mic)
+		arizona_start_mic(info);
+
+	if (info->hpdet_active) {
+		pm_runtime_put_autosuspend(info->dev);
+		info->hpdet_active = false;
+	}
+
+	info->hpdet_done = true;
+
+out:
+	mutex_unlock(&info->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void arizona_identify_headphone(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	int ret;
+
+	if (info->hpdet_done)
+		return;
+
+	dev_dbg(arizona->dev, "Starting HPDET\n");
+
+	/* Make sure we keep the device enabled during the measurement */
+	pm_runtime_get(info->dev);
+
+	info->hpdet_active = true;
+
+	if (info->mic)
+		arizona_stop_mic(info);
+
+	ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
+
+	ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ACCESSORY_DETECT_MODE_1,
+				 ARIZONA_ACCDET_MODE_MASK,
+				 ARIZONA_ACCDET_MODE_HPL);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		goto err;
+	}
+
+	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+				 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
+			ret);
+		goto err;
+	}
+
+	return;
+
+err:
+	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+
+	/* Just report headphone */
+	ret = extcon_update_state(&info->edev,
+				  1 << ARIZONA_CABLE_HEADPHONE,
+				  1 << ARIZONA_CABLE_HEADPHONE);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+
+	if (info->mic)
+		arizona_start_mic(info);
+
+	info->hpdet_active = false;
+}
+
+static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val;
+	int ret;
+
+	dev_dbg(arizona->dev, "Starting identification via HPDET\n");
+
+	/* Make sure we keep the device enabled during the measurement */
+	pm_runtime_get_sync(info->dev);
+
+	info->hpdet_active = true;
+
+	arizona_extcon_pulse_micbias(info);
+
+	mutex_lock(&arizona->dapm->card->dapm_mutex);
+
+	ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read output enables: %d\n",
+			ret);
+		val = 0;
+	}
+
+	if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
+		ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
+					 0x4000);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to do magic: %d\n",
+				 ret);
+
+		ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
+					 0x4000);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to do magic: %d\n",
+				 ret);
+	}
+
+	mutex_unlock(&arizona->dapm->card->dapm_mutex);
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ACCESSORY_DETECT_MODE_1,
+				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
+				 info->micd_modes[0].src |
+				 ARIZONA_ACCDET_MODE_HPL);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		goto err;
+	}
+
+	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+				 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
+			ret);
+		goto err;
+	}
+
+	return;
+
+err:
+	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+
+	/* Just report headphone */
+	ret = extcon_update_state(&info->edev,
+				  1 << ARIZONA_CABLE_HEADPHONE,
+				  1 << ARIZONA_CABLE_HEADPHONE);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+
+	info->hpdet_active = false;
+}
+
 static irqreturn_t arizona_micdet(int irq, void *data)
 {
 	struct arizona_extcon_info *info = data;
@@ -187,16 +757,23 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 
 	/* If we got a high impedence we should have a headset, report it. */
 	if (info->detecting && (val & 0x400)) {
+		arizona_identify_headphone(info);
+
 		ret = extcon_update_state(&info->edev,
-					  1 << ARIZONA_CABLE_MICROPHONE |
-					  1 << ARIZONA_CABLE_HEADPHONE,
-					  1 << ARIZONA_CABLE_MICROPHONE |
-					  1 << ARIZONA_CABLE_HEADPHONE);
+					  1 << ARIZONA_CABLE_MICROPHONE,
+					  1 << ARIZONA_CABLE_MICROPHONE);
 
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
 				ret);
 
+		/* Don't need to regulate for button detection */
+		ret = regulator_allow_bypass(info->micvdd, false);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+				ret);
+		}
+
 		info->mic = true;
 		info->detecting = false;
 		goto handled;
@@ -209,20 +786,13 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 	 * impedence then give up and report headphones.
 	 */
 	if (info->detecting && (val & 0x3f8)) {
-		info->jack_flips++;
-
 		if (info->jack_flips >= info->micd_num_modes) {
-			dev_dbg(arizona->dev, "Detected headphone\n");
+			dev_dbg(arizona->dev, "Detected HP/line\n");
+			arizona_identify_headphone(info);
+
 			info->detecting = false;
-			arizona_stop_mic(info);
 
-			ret = extcon_set_cable_state_(&info->edev,
-						      ARIZONA_CABLE_HEADPHONE,
-						      true);
-			if (ret != 0)
-				dev_err(arizona->dev,
-					"Headphone report failed: %d\n",
-				ret);
+			arizona_stop_mic(info);
 		} else {
 			info->micd_mode++;
 			if (info->micd_mode == info->micd_num_modes)
@@ -258,13 +828,7 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 			info->detecting = false;
 			arizona_stop_mic(info);
 
-			ret = extcon_set_cable_state_(&info->edev,
-						      ARIZONA_CABLE_HEADPHONE,
-						      true);
-			if (ret != 0)
-				dev_err(arizona->dev,
-					"Headphone report failed: %d\n",
-				ret);
+			arizona_identify_headphone(info);
 		} else {
 			dev_warn(arizona->dev, "Button with no mic: %x\n",
 				 val);
@@ -275,6 +839,7 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 			input_report_key(info->input,
 					 arizona_lvl_to_key[i].report, 0);
 		input_sync(info->input);
+		arizona_extcon_pulse_micbias(info);
 	}
 
 handled:
@@ -284,17 +849,38 @@ handled:
 	return IRQ_HANDLED;
 }
 
+static void arizona_hpdet_work(struct work_struct *work)
+{
+	struct arizona_extcon_info *info = container_of(work,
+							struct arizona_extcon_info,
+							hpdet_work.work);
+
+	mutex_lock(&info->lock);
+	arizona_start_hpdet_acc_id(info);
+	mutex_unlock(&info->lock);
+}
+
 static irqreturn_t arizona_jackdet(int irq, void *data)
 {
 	struct arizona_extcon_info *info = data;
 	struct arizona *arizona = info->arizona;
-	unsigned int val;
+	unsigned int val, present, mask;
 	int ret, i;
 
 	pm_runtime_get_sync(info->dev);
 
+	cancel_delayed_work_sync(&info->hpdet_work);
+
 	mutex_lock(&info->lock);
 
+	if (arizona->pdata.jd_gpio5) {
+		mask = ARIZONA_MICD_CLAMP_STS;
+		present = 0;
+	} else {
+		mask = ARIZONA_JD1_STS;
+		present = ARIZONA_JD1_STS;
+	}
+
 	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
@@ -304,7 +890,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		return IRQ_NONE;
 	}
 
-	if (val & ARIZONA_JD1_STS) {
+	if ((val & mask) == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
 		ret = extcon_set_cable_state_(&info->edev,
 					      ARIZONA_CABLE_MECHANICAL, true);
@@ -313,12 +899,31 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 			dev_err(arizona->dev, "Mechanical report failed: %d\n",
 				ret);
 
-		arizona_start_mic(info);
+		if (!arizona->pdata.hpdet_acc_id) {
+			info->detecting = true;
+			info->mic = false;
+			info->jack_flips = 0;
+
+			arizona_start_mic(info);
+		} else {
+			schedule_delayed_work(&info->hpdet_work,
+					      msecs_to_jiffies(250));
+		}
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0);
 	} else {
 		dev_dbg(arizona->dev, "Detected jack removal\n");
 
 		arizona_stop_mic(info);
 
+		info->num_hpdet_res = 0;
+		for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
+			info->hpdet_res[i] = 0;
+		info->mic = false;
+		info->hpdet_done = false;
+
 		for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
 			input_report_key(info->input,
 					 arizona_lvl_to_key[i].report, 0);
@@ -328,8 +933,20 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		if (ret != 0)
 			dev_err(arizona->dev, "Removal report failed: %d\n",
 				ret);
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
 	}
 
+	/* Clear trig_sts to make sure DCVDD is not forced up */
+	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
+		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
+		     ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
+		     ARIZONA_JD1_FALL_TRIG_STS |
+		     ARIZONA_JD1_RISE_TRIG_STS);
+
 	mutex_unlock(&info->lock);
 
 	pm_runtime_mark_last_busy(info->dev);
@@ -343,8 +960,12 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
 	struct arizona_pdata *pdata;
 	struct arizona_extcon_info *info;
+	int jack_irq_fall, jack_irq_rise;
 	int ret, mode, i;
 
+	if (!arizona->dapm || !arizona->dapm->card)
+		return -EPROBE_DEFER;
+
 	pdata = dev_get_platdata(arizona->dev);
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
@@ -364,7 +985,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	mutex_init(&info->lock);
 	info->arizona = arizona;
 	info->dev = &pdev->dev;
-	info->detecting = true;
+	INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
 	platform_set_drvdata(pdev, info);
 
 	switch (arizona->type) {
@@ -374,6 +995,8 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			info->micd_reva = true;
 			break;
 		default:
+			info->micd_clamp = true;
+			info->hpdet_ip = 1;
 			break;
 		}
 		break;
@@ -416,9 +1039,64 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (arizona->pdata.hpdet_id_gpio > 0) {
+		ret = devm_gpio_request_one(&pdev->dev,
+					    arizona->pdata.hpdet_id_gpio,
+					    GPIOF_OUT_INIT_LOW,
+					    "HPDET");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
+				arizona->pdata.hpdet_id_gpio, ret);
+			goto err_register;
+		}
+	}
+
+	if (arizona->pdata.micd_bias_start_time)
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_BIAS_STARTTIME_MASK,
+				   arizona->pdata.micd_bias_start_time
+				   << ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
+
+	if (arizona->pdata.micd_rate)
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_RATE_MASK,
+				   arizona->pdata.micd_rate
+				   << ARIZONA_MICD_RATE_SHIFT);
+
+	if (arizona->pdata.micd_dbtime)
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_DBTIME_MASK,
+				   arizona->pdata.micd_dbtime
+				   << ARIZONA_MICD_DBTIME_SHIFT);
+
+	/*
+	 * If we have a clamp use it, activating in conjunction with
+	 * GPIO5 if that is connected for jack detect operation.
+	 */
+	if (info->micd_clamp) {
+		if (arizona->pdata.jd_gpio5) {
+			/* Put the GPIO into input mode */
+			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
+				     0xc101);
+
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_MICD_CLAMP_CONTROL,
+					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
+		} else {
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_MICD_CLAMP_CONTROL,
+					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
+		}
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB,
+				   ARIZONA_MICD_CLAMP_DB);
+	}
+
 	arizona_extcon_set_mode(info, 0);
 
-	info->input = input_allocate_device();
+	info->input = devm_input_allocate_device(&pdev->dev);
 	if (!info->input) {
 		dev_err(arizona->dev, "Can't allocate input dev\n");
 		ret = -ENOMEM;
@@ -436,7 +1114,15 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	pm_runtime_idle(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE,
+	if (arizona->pdata.jd_gpio5) {
+		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
+		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
+	} else {
+		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
+		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
+	}
+
+	ret = arizona_request_irq(arizona, jack_irq_rise,
 				  "JACKDET rise", arizona_jackdet, info);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
@@ -444,21 +1130,21 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		goto err_input;
 	}
 
-	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1);
+	ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
 			ret);
 		goto err_rise;
 	}
 
-	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL,
+	ret = arizona_request_irq(arizona, jack_irq_fall,
 				  "JACKDET fall", arizona_jackdet, info);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
 		goto err_rise_wake;
 	}
 
-	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1);
+	ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
 			ret);
@@ -472,11 +1158,12 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		goto err_fall_wake;
 	}
 
-	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
-			   ARIZONA_MICD_BIAS_STARTTIME_MASK |
-			   ARIZONA_MICD_RATE_MASK,
-			   7 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT |
-			   8 << ARIZONA_MICD_RATE_SHIFT);
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
+				  "HPDET", arizona_hpdet_irq, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
+		goto err_micdet;
+	}
 
 	arizona_clk32k_enable(arizona);
 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
@@ -494,23 +1181,24 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	ret = input_register_device(info->input);
 	if (ret) {
 		dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
-		goto err_micdet;
+		goto err_hpdet;
 	}
 
 	return 0;
 
+err_hpdet:
+	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
 err_micdet:
 	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
 err_fall_wake:
-	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0);
+	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
 err_fall:
-	arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info);
+	arizona_free_irq(arizona, jack_irq_fall, info);
 err_rise_wake:
-	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0);
+	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
 err_rise:
-	arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info);
+	arizona_free_irq(arizona, jack_irq_rise, info);
 err_input:
-	input_free_device(info->input);
 err_register:
 	pm_runtime_disable(&pdev->dev);
 	extcon_dev_unregister(&info->edev);
@@ -522,18 +1210,32 @@ static int arizona_extcon_remove(struct platform_device *pdev)
 {
 	struct arizona_extcon_info *info = platform_get_drvdata(pdev);
 	struct arizona *arizona = info->arizona;
+	int jack_irq_rise, jack_irq_fall;
 
 	pm_runtime_disable(&pdev->dev);
 
-	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0);
-	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0);
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_MICD_CLAMP_CONTROL,
+			   ARIZONA_MICD_CLAMP_MODE_MASK, 0);
+
+	if (arizona->pdata.jd_gpio5) {
+		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
+		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
+	} else {
+		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
+		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
+	}
+
+	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
+	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
+	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
 	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
-	arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info);
-	arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info);
+	arizona_free_irq(arizona, jack_irq_rise, info);
+	arizona_free_irq(arizona, jack_irq_fall, info);
+	cancel_delayed_work_sync(&info->hpdet_work);
 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 			   ARIZONA_JD1_ENA, 0);
 	arizona_clk32k_disable(arizona);
-	input_unregister_device(info->input);
 	extcon_dev_unregister(&info->edev);
 
 	return 0;
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 1b14bfc..02bec32 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -29,7 +29,7 @@
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
 #include <linux/extcon.h>
-#include <linux/extcon/extcon_gpio.h>
+#include <linux/extcon/extcon-gpio.h>
 
 struct gpio_extcon_data {
 	struct extcon_dev edev;
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 8c17b65..b70e381 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -29,92 +30,7 @@
 #include <linux/irqdomain.h>
 
 #define	DEV_NAME			"max77693-muic"
-
-/* MAX77693 MUIC - STATUS1~3 Register */
-#define STATUS1_ADC_SHIFT		(0)
-#define STATUS1_ADCLOW_SHIFT		(5)
-#define STATUS1_ADCERR_SHIFT		(6)
-#define STATUS1_ADC1K_SHIFT		(7)
-#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
-#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
-#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
-#define STATUS1_ADC1K_MASK		(0x1 << STATUS1_ADC1K_SHIFT)
-
-#define STATUS2_CHGTYP_SHIFT		(0)
-#define STATUS2_CHGDETRUN_SHIFT		(3)
-#define STATUS2_DCDTMR_SHIFT		(4)
-#define STATUS2_DXOVP_SHIFT		(5)
-#define STATUS2_VBVOLT_SHIFT		(6)
-#define STATUS2_VIDRM_SHIFT		(7)
-#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
-#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
-#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DXOVP_MASK		(0x1 << STATUS2_DXOVP_SHIFT)
-#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
-#define STATUS2_VIDRM_MASK		(0x1 << STATUS2_VIDRM_SHIFT)
-
-#define STATUS3_OVP_SHIFT		(2)
-#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
-
-/* MAX77693 CDETCTRL1~2 register */
-#define CDETCTRL1_CHGDETEN_SHIFT	(0)
-#define CDETCTRL1_CHGTYPMAN_SHIFT	(1)
-#define CDETCTRL1_DCDEN_SHIFT		(2)
-#define CDETCTRL1_DCD2SCT_SHIFT		(3)
-#define CDETCTRL1_CDDELAY_SHIFT		(4)
-#define CDETCTRL1_DCDCPL_SHIFT		(5)
-#define CDETCTRL1_CDPDET_SHIFT		(7)
-#define CDETCTRL1_CHGDETEN_MASK		(0x1 << CDETCTRL1_CHGDETEN_SHIFT)
-#define CDETCTRL1_CHGTYPMAN_MASK	(0x1 << CDETCTRL1_CHGTYPMAN_SHIFT)
-#define CDETCTRL1_DCDEN_MASK		(0x1 << CDETCTRL1_DCDEN_SHIFT)
-#define CDETCTRL1_DCD2SCT_MASK		(0x1 << CDETCTRL1_DCD2SCT_SHIFT)
-#define CDETCTRL1_CDDELAY_MASK		(0x1 << CDETCTRL1_CDDELAY_SHIFT)
-#define CDETCTRL1_DCDCPL_MASK		(0x1 << CDETCTRL1_DCDCPL_SHIFT)
-#define CDETCTRL1_CDPDET_MASK		(0x1 << CDETCTRL1_CDPDET_SHIFT)
-
-#define CDETCTRL2_VIDRMEN_SHIFT		(1)
-#define CDETCTRL2_DXOVPEN_SHIFT		(3)
-#define CDETCTRL2_VIDRMEN_MASK		(0x1 << CDETCTRL2_VIDRMEN_SHIFT)
-#define CDETCTRL2_DXOVPEN_MASK		(0x1 << CDETCTRL2_DXOVPEN_SHIFT)
-
-/* MAX77693 MUIC - CONTROL1~3 register */
-#define COMN1SW_SHIFT			(0)
-#define COMP2SW_SHIFT			(3)
-#define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
-#define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
-#define COMP_SW_MASK			(COMP2SW_MASK | COMN1SW_MASK)
-#define CONTROL1_SW_USB			((1 << COMP2SW_SHIFT) \
-						| (1 << COMN1SW_SHIFT))
-#define CONTROL1_SW_AUDIO		((2 << COMP2SW_SHIFT) \
-						| (2 << COMN1SW_SHIFT))
-#define CONTROL1_SW_UART		((3 << COMP2SW_SHIFT) \
-						| (3 << COMN1SW_SHIFT))
-#define CONTROL1_SW_OPEN		((0 << COMP2SW_SHIFT) \
-						| (0 << COMN1SW_SHIFT))
-
-#define CONTROL2_LOWPWR_SHIFT		(0)
-#define CONTROL2_ADCEN_SHIFT		(1)
-#define CONTROL2_CPEN_SHIFT		(2)
-#define CONTROL2_SFOUTASRT_SHIFT	(3)
-#define CONTROL2_SFOUTORD_SHIFT		(4)
-#define CONTROL2_ACCDET_SHIFT		(5)
-#define CONTROL2_USBCPINT_SHIFT		(6)
-#define CONTROL2_RCPS_SHIFT		(7)
-#define CONTROL2_LOWPWR_MASK		(0x1 << CONTROL2_LOWPWR_SHIFT)
-#define CONTROL2_ADCEN_MASK		(0x1 << CONTROL2_ADCEN_SHIFT)
-#define CONTROL2_CPEN_MASK		(0x1 << CONTROL2_CPEN_SHIFT)
-#define CONTROL2_SFOUTASRT_MASK		(0x1 << CONTROL2_SFOUTASRT_SHIFT)
-#define CONTROL2_SFOUTORD_MASK		(0x1 << CONTROL2_SFOUTORD_SHIFT)
-#define CONTROL2_ACCDET_MASK		(0x1 << CONTROL2_ACCDET_SHIFT)
-#define CONTROL2_USBCPINT_MASK		(0x1 << CONTROL2_USBCPINT_SHIFT)
-#define CONTROL2_RCPS_MASK		(0x1 << CONTROL2_RCPS_SHIFT)
-
-#define CONTROL3_JIGSET_SHIFT		(0)
-#define CONTROL3_BTLDSET_SHIFT		(2)
-#define CONTROL3_ADCDBSET_SHIFT		(4)
-#define CONTROL3_JIGSET_MASK		(0x3 << CONTROL3_JIGSET_SHIFT)
-#define CONTROL3_BTLDSET_MASK		(0x3 << CONTROL3_BTLDSET_SHIFT)
-#define CONTROL3_ADCDBSET_MASK		(0x3 << CONTROL3_ADCDBSET_SHIFT)
+#define	DELAY_MS_DEFAULT		20000		/* unit: millisecond */
 
 enum max77693_muic_adc_debounce_time {
 	ADC_DEBOUNCE_TIME_5MS = 0,
@@ -127,14 +43,40 @@ struct max77693_muic_info {
 	struct device *dev;
 	struct max77693_dev *max77693;
 	struct extcon_dev *edev;
-	int prev_adc;
-	int prev_adc_gnd;
+	int prev_cable_type;
+	int prev_cable_type_gnd;
 	int prev_chg_type;
+	int prev_button_type;
 	u8 status[2];
 
 	int irq;
 	struct work_struct irq_work;
 	struct mutex mutex;
+
+	/*
+	 * Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	struct delayed_work wq_detcable;
+
+	/* Button of dock device */
+	struct input_dev *dock;
+
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	int path_usb;
+	int path_uart;
+};
+
+enum max77693_muic_cable_group {
+	MAX77693_CABLE_GROUP_ADC = 0,
+	MAX77693_CABLE_GROUP_ADC_GND,
+	MAX77693_CABLE_GROUP_CHG,
+	MAX77693_CABLE_GROUP_VBVOLT,
 };
 
 enum max77693_muic_charger_type {
@@ -215,27 +157,59 @@ enum max77693_muic_acc_type {
 
 	/* The below accessories have same ADC value so ADCLow and
 	   ADC1K bit is used to separate specific accessory */
-	MAX77693_MUIC_GND_USB_OTG = 0x100,	/* ADC:0x0, ADCLow:0, ADC1K:0 */
-	MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */
-	MAX77693_MUIC_GND_MHL_CABLE = 0x103,	/* ADC:0x0, ADCLow:1, ADC1K:1 */
+	MAX77693_MUIC_GND_USB_OTG = 0x100,	/* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */
+	MAX77693_MUIC_GND_USB_OTG_VB = 0x104,	/* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */
+	MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */
+	MAX77693_MUIC_GND_MHL = 0x103,		/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */
+	MAX77693_MUIC_GND_MHL_VB = 0x107,	/* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */
 };
 
 /* MAX77693 MUIC device support below list of accessories(external connector) */
-const char *max77693_extcon_cable[] = {
-	[0] = "USB",
-	[1] = "USB-Host",
-	[2] = "TA",
-	[3] = "Fast-charger",
-	[4] = "Slow-charger",
-	[5] = "Charge-downstream",
-	[6] = "MHL",
-	[7] = "Audio-video-load",
-	[8] = "Audio-video-noload",
-	[9] = "JIG",
+enum {
+	EXTCON_CABLE_USB = 0,
+	EXTCON_CABLE_USB_HOST,
+	EXTCON_CABLE_TA,
+	EXTCON_CABLE_FAST_CHARGER,
+	EXTCON_CABLE_SLOW_CHARGER,
+	EXTCON_CABLE_CHARGE_DOWNSTREAM,
+	EXTCON_CABLE_MHL,
+	EXTCON_CABLE_MHL_TA,
+	EXTCON_CABLE_JIG_USB_ON,
+	EXTCON_CABLE_JIG_USB_OFF,
+	EXTCON_CABLE_JIG_UART_OFF,
+	EXTCON_CABLE_JIG_UART_ON,
+	EXTCON_CABLE_DOCK_SMART,
+	EXTCON_CABLE_DOCK_DESK,
+	EXTCON_CABLE_DOCK_AUDIO,
+
+	_EXTCON_CABLE_NUM,
+};
+
+static const char *max77693_extcon_cable[] = {
+	[EXTCON_CABLE_USB]			= "USB",
+	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
+	[EXTCON_CABLE_TA]			= "TA",
+	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
+	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
+	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_CABLE_MHL]			= "MHL",
+	[EXTCON_CABLE_MHL_TA]			= "MHL_TA",
+	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
+	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
+	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
+	[EXTCON_CABLE_JIG_UART_ON]		= "Dock-Car",
+	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
+	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
+	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
 
 	NULL,
 };
 
+/*
+ * max77693_muic_set_debounce_time - Set the debounce time of ADC
+ * @info: the instance including private data of max77693 MUIC
+ * @time: the debounce time of ADC
+ */
 static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 		enum max77693_muic_adc_debounce_time time)
 {
@@ -250,18 +224,29 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 					  MAX77693_MUIC_REG_CTRL3,
 					  time << CONTROL3_ADCDBSET_SHIFT,
 					  CONTROL3_ADCDBSET_MASK);
-		if (ret)
+		if (ret) {
 			dev_err(info->dev, "failed to set ADC debounce time\n");
+			return -EAGAIN;
+		}
 		break;
 	default:
 		dev_err(info->dev, "invalid ADC debounce time\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
-	return ret;
+	return 0;
 };
 
+/*
+ * max77693_muic_set_path - Set hardware line according to attached cable
+ * @info: the instance including private data of max77693 MUIC
+ * @value: the path according to attached cable
+ * @attached: the state of cable (true:attached, false:detached)
+ *
+ * The max77693 MUIC device share outside H/W line among a varity of cables
+ * so, this function set internal path of H/W line according to the type of
+ * attached cable.
+ */
 static int max77693_muic_set_path(struct max77693_muic_info *info,
 		u8 val, bool attached)
 {
@@ -277,7 +262,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 			MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
-		goto out;
+		return -EAGAIN;
 	}
 
 	if (attached)
@@ -290,141 +275,457 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
-		goto out;
+		return -EAGAIN;
 	}
 
 	dev_info(info->dev,
 		"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
 		ctrl1, ctrl2, attached ? "attached" : "detached");
-out:
-	return ret;
+
+	return 0;
 }
 
-static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info,
-		bool attached)
+/*
+ * max77693_muic_get_cable_type - Return cable type and check cable state
+ * @info: the instance including private data of max77693 MUIC
+ * @group: the path according to attached cable
+ * @attached: store cable state and return
+ *
+ * This function check the cable state either attached or detached,
+ * and then divide precise type of cable according to cable group.
+ *	- MAX77693_CABLE_GROUP_ADC
+ *	- MAX77693_CABLE_GROUP_ADC_GND
+ *	- MAX77693_CABLE_GROUP_CHG
+ *	- MAX77693_CABLE_GROUP_VBVOLT
+ */
+static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
+		enum max77693_muic_cable_group group, bool *attached)
 {
-	int ret = 0;
-	int type;
-	int adc, adc1k, adclow;
+	int cable_type = 0;
+	int adc;
+	int adc1k;
+	int adclow;
+	int vbvolt;
+	int chg_type;
+
+	switch (group) {
+	case MAX77693_CABLE_GROUP_ADC:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & STATUS1_ADC_MASK;
+		adc >>= STATUS1_ADC_SHIFT;
+
+		/*
+		 * Check current cable state/cable type and store cable type
+		 * (info->prev_cable_type) for handling cable when cable is
+		 * detached.
+		 */
+		if (adc == MAX77693_MUIC_ADC_OPEN) {
+			*attached = false;
+
+			cable_type = info->prev_cable_type;
+			info->prev_cable_type = MAX77693_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			cable_type = info->prev_cable_type = adc;
+		}
+		break;
+	case MAX77693_CABLE_GROUP_ADC_GND:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & STATUS1_ADC_MASK;
+		adc >>= STATUS1_ADC_SHIFT;
+
+		/*
+		 * Check current cable state/cable type and store cable type
+		 * (info->prev_cable_type/_gnd) for handling cable when cable
+		 * is detached.
+		 */
+		if (adc == MAX77693_MUIC_ADC_OPEN) {
+			*attached = false;
+
+			cable_type = info->prev_cable_type_gnd;
+			info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			adclow = info->status[0] & STATUS1_ADCLOW_MASK;
+			adclow >>= STATUS1_ADCLOW_SHIFT;
+			adc1k = info->status[0] & STATUS1_ADC1K_MASK;
+			adc1k >>= STATUS1_ADC1K_SHIFT;
+
+			vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
+			vbvolt >>= STATUS2_VBVOLT_SHIFT;
+
+			/**
+			 * [0x1][VBVolt][ADCLow][ADC1K]
+			 * [0x1    0	   0       0  ]	: USB_OTG
+			 * [0x1    1	   0       0  ]	: USB_OTG_VB
+			 * [0x1    0       1       0  ] : Audio Video Cable with load
+			 * [0x1    0       1       1  ] : MHL without charging connector
+			 * [0x1    1       1       1  ] : MHL with charging connector
+			 */
+			cable_type = ((0x1 << 8)
+					| (vbvolt << 2)
+					| (adclow << 1)
+					| adc1k);
+
+			info->prev_cable_type = adc;
+			info->prev_cable_type_gnd = cable_type;
+		}
 
-	if (attached) {
+		break;
+	case MAX77693_CABLE_GROUP_CHG:
+		/*
+		 * Read charger type to check cable type and decide cable state
+		 * according to type of charger cable.
+		 */
+		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
+		chg_type >>= STATUS2_CHGTYP_SHIFT;
+
+		if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
+			*attached = false;
+
+			cable_type = info->prev_chg_type;
+			info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE;
+		} else {
+			*attached = true;
+
+			/*
+			 * Check current cable state/cable type and store cable
+			 * type(info->prev_chg_type) for handling cable when
+			 * charger cable is detached.
+			 */
+			cable_type = info->prev_chg_type = chg_type;
+		}
+
+		break;
+	case MAX77693_CABLE_GROUP_VBVOLT:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
 		adc = info->status[0] & STATUS1_ADC_MASK;
-		adclow = info->status[0] & STATUS1_ADCLOW_MASK;
-		adclow >>= STATUS1_ADCLOW_SHIFT;
-		adc1k = info->status[0] & STATUS1_ADC1K_MASK;
-		adc1k >>= STATUS1_ADC1K_SHIFT;
-
-		/**
-		 * [0x1][ADCLow][ADC1K]
-		 * [0x1    0       0  ]	: USB_OTG
-		 * [0x1    1       0  ] : Audio Video Cable with load
-		 * [0x1    1       1  ] : MHL
+		adc >>= STATUS1_ADC_SHIFT;
+		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
+		chg_type >>= STATUS2_CHGTYP_SHIFT;
+
+		if (adc == MAX77693_MUIC_ADC_OPEN
+				&& chg_type == MAX77693_CHARGER_TYPE_NONE)
+			*attached = false;
+		else
+			*attached = true;
+
+		/*
+		 * Read vbvolt field, if vbvolt is 1,
+		 * this cable is used for charging.
+		 */
+		vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
+		vbvolt >>= STATUS2_VBVOLT_SHIFT;
+
+		cable_type = vbvolt;
+		break;
+	default:
+		dev_err(info->dev, "Unknown cable group (%d)\n", group);
+		cable_type = -EINVAL;
+		break;
+	}
+
+	return cable_type;
+}
+
+static int max77693_muic_dock_handler(struct max77693_muic_info *info,
+		int cable_type, bool attached)
+{
+	int ret = 0;
+	int vbvolt;
+	bool cable_attached;
+	char dock_name[CABLE_NAME_MAX];
+
+	dev_info(info->dev,
+		"external connector is %s (adc:0x%02x)\n",
+		attached ? "attached" : "detached", cable_type);
+
+	switch (cable_type) {
+	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+		/*
+		 * Check power cable whether attached or detached state.
+		 * The Dock-Smart device need surely external power supply.
+		 * If power cable(USB/TA) isn't connected to Dock device,
+		 * user can't use Dock-Smart for desktop mode.
+		 */
+		vbvolt = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_VBVOLT, &cable_attached);
+		if (attached && !vbvolt) {
+			dev_warn(info->dev,
+				"Cannot detect external power supply\n");
+			return 0;
+		}
+
+		/*
+		 * Notify Dock-Smart/MHL state.
+		 * - Dock-Smart device include three type of cable which
+		 * are HDMI, USB for mouse/keyboard and micro-usb port
+		 * for USB/TA cable. Dock-Smart device need always exteranl
+		 * power supply(USB/TA cable through micro-usb cable). Dock-
+		 * Smart device support screen output of target to separate
+		 * monitor and mouse/keyboard for desktop mode.
+		 *
+		 * Features of 'USB/TA cable with Dock-Smart device'
+		 * - Support MHL
+		 * - Support external output feature of audio
+		 * - Support charging through micro-usb port without data
+		 *	     connection if TA cable is connected to target.
+		 * - Support charging and data connection through micro-usb port
+		 *           if USB cable is connected between target and host
+		 *	     device.
+		 * - Support OTG device (Mouse/Keyboard)
 		 */
-		type = ((0x1 << 8) | (adclow << 1) | adc1k);
+		ret = max77693_muic_set_path(info, info->path_usb, attached);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
+		extcon_set_cable_state(info->edev, "MHL", attached);
+		goto out;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
+		strcpy(dock_name, "Dock-Car");
+		break;
+	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
+		strcpy(dock_name, "Dock-Desk");
+		break;
+	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+		strcpy(dock_name, "Dock-Audio");
+		if (!attached)
+			extcon_set_cable_state(info->edev, "USB", false);
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s dock device\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
+	}
+
+	/* Dock-Car/Desk/Audio, PATH:AUDIO */
+	ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+	if (ret < 0)
+		return ret;
+	extcon_set_cable_state(info->edev, dock_name, attached);
+
+out:
+	return 0;
+}
+
+static int max77693_muic_dock_button_handler(struct max77693_muic_info *info,
+		int button_type, bool attached)
+{
+	struct input_dev *dock = info->dock;
+	unsigned int code;
+
+	switch (button_type) {
+	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1:
+		/* DOCK_KEY_PREV */
+		code = KEY_PREVIOUSSONG;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1:
+		/* DOCK_KEY_NEXT */
+		code = KEY_NEXTSONG;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:
+		/* DOCK_VOL_DOWN */
+		code = KEY_VOLUMEDOWN;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:
+		/* DOCK_VOL_UP */
+		code = KEY_VOLUMEUP;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1:
+		/* DOCK_KEY_PLAY_PAUSE */
+		code = KEY_PLAYPAUSE;
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s key (adc:0x%x)\n",
+			attached ? "pressed" : "released", button_type);
+		return -EINVAL;
+	}
+
+	input_event(dock, EV_KEY, code, attached);
+	input_sync(dock);
+
+	return 0;
+}
 
-		/* Store previous ADC value to handle accessory
-		   when accessory will be detached */
-		info->prev_adc = adc;
-		info->prev_adc_gnd = type;
-	} else
-		type = info->prev_adc_gnd;
+static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
+{
+	int cable_type_gnd;
+	int ret = 0;
+	bool attached;
 
-	switch (type) {
+	cable_type_gnd = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_ADC_GND, &attached);
+
+	switch (cable_type_gnd) {
 	case MAX77693_MUIC_GND_USB_OTG:
-		/* USB_OTG */
+	case MAX77693_MUIC_GND_USB_OTG_VB:
+		/* USB_OTG, PATH: AP_USB */
 		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
 		if (ret < 0)
-			goto out;
+			return ret;
 		extcon_set_cable_state(info->edev, "USB-Host", attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
-		/* Audio Video Cable with load */
+		/* Audio Video Cable with load, PATH:AUDIO */
 		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 		if (ret < 0)
-			goto out;
+			return ret;
 		extcon_set_cable_state(info->edev,
 				"Audio-video-load", attached);
 		break;
-	case MAX77693_MUIC_GND_MHL_CABLE:
-		/* MHL */
+	case MAX77693_MUIC_GND_MHL:
+	case MAX77693_MUIC_GND_MHL_VB:
+		/* MHL or MHL with USB/TA cable */
 		extcon_set_cable_state(info->edev, "MHL", attached);
 		break;
 	default:
-		dev_err(info->dev, "failed to detect %s accessory\n",
+		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
 			attached ? "attached" : "detached");
-		dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n",
-			adc, adclow, adc1k);
-		ret = -EINVAL;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77693_muic_jig_handler(struct max77693_muic_info *info,
+		int cable_type, bool attached)
+{
+	char cable_name[32];
+	int ret = 0;
+	u8 path = CONTROL1_SW_OPEN;
+
+	dev_info(info->dev,
+		"external connector is %s (adc:0x%02x)\n",
+		attached ? "attached" : "detached", cable_type);
+
+	switch (cable_type) {
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
+		/* PATH:AP_USB */
+		strcpy(cable_name, "JIG-USB-OFF");
+		path = CONTROL1_SW_USB;
+		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
+		/* PATH:AP_USB */
+		strcpy(cable_name, "JIG-USB-ON");
+		path = CONTROL1_SW_USB;
 		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
+		/* PATH:AP_UART */
+		strcpy(cable_name, "JIG-UART-OFF");
+		path = CONTROL1_SW_UART;
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s jig cable\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
 	}
 
-out:
-	return ret;
+	ret = max77693_muic_set_path(info, path, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_cable_state(info->edev, cable_name, attached);
+
+	return 0;
 }
 
-static int max77693_muic_adc_handler(struct max77693_muic_info *info,
-		int curr_adc, bool attached)
+static int max77693_muic_adc_handler(struct max77693_muic_info *info)
 {
+	int cable_type;
+	int button_type;
+	bool attached;
 	int ret = 0;
-	int adc;
 
-	if (attached) {
-		/* Store ADC value to handle accessory
-		   when accessory will be detached */
-		info->prev_adc = curr_adc;
-		adc = curr_adc;
-	} else
-		adc = info->prev_adc;
+	/* Check accessory state which is either detached or attached */
+	cable_type = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_ADC, &attached);
 
 	dev_info(info->dev,
 		"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
-		attached ? "attached" : "detached", curr_adc, info->prev_adc);
+		attached ? "attached" : "detached", cable_type,
+		info->prev_cable_type);
 
-	switch (adc) {
+	switch (cable_type) {
 	case MAX77693_MUIC_ADC_GROUND:
 		/* USB_OTG/MHL/Audio */
-		max77693_muic_adc_ground_handler(info, attached);
+		max77693_muic_adc_ground_handler(info);
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
-		/* USB */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			goto out;
-		extcon_set_cable_state(info->edev, "USB", attached);
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
-	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
 		/* JIG */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_UART, attached);
+		ret = max77693_muic_jig_handler(info, cable_type, attached);
 		if (ret < 0)
-			goto out;
-		extcon_set_cable_state(info->edev, "JIG", attached);
+			return ret;
 		break;
-	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:
-		/* Audio Video cable with no-load */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
+	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
+	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+		/*
+		 * DOCK device
+		 *
+		 * The MAX77693 MUIC device can detect total 34 cable type
+		 * except of charger cable and MUIC device didn't define
+		 * specfic role of cable in the range of from 0x01 to 0x12
+		 * of ADC value. So, can use/define cable with no role according
+		 * to schema of hardware board.
+		 */
+		ret = max77693_muic_dock_handler(info, cable_type, attached);
 		if (ret < 0)
-			goto out;
-		extcon_set_cable_state(info->edev,
-				"Audio-video-noload", attached);
+			return ret;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:	/* DOCK_KEY_PREV */
+	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:	/* DOCK_KEY_NEXT */
+	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:	/* DOCK_VOL_DOWN */
+	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:	/* DOCK_VOL_UP */
+	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:	/* DOCK_KEY_PLAY_PAUSE */
+		/*
+		 * Button of DOCK device
+		 * - the Prev/Next/Volume Up/Volume Down/Play-Pause button
+		 *
+		 * The MAX77693 MUIC device can detect total 34 cable type
+		 * except of charger cable and MUIC device didn't define
+		 * specfic role of cable in the range of from 0x01 to 0x12
+		 * of ADC value. So, can use/define cable with no role according
+		 * to schema of hardware board.
+		 */
+		if (attached)
+			button_type = info->prev_button_type = cable_type;
+		else
+			button_type = info->prev_button_type;
+
+		ret = max77693_muic_dock_button_handler(info, button_type,
+							attached);
+		if (ret < 0)
+			return ret;
 		break;
 	case MAX77693_MUIC_ADC_SEND_END_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON:
-	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON:
-	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON:
-	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:
-	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:
 	case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON:
-	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:
 	case MAX77693_MUIC_ADC_RESERVED_ACC_1:
 	case MAX77693_MUIC_ADC_RESERVED_ACC_2:
-	case MAX77693_MUIC_ADC_RESERVED_ACC_3:
 	case MAX77693_MUIC_ADC_RESERVED_ACC_4:
 	case MAX77693_MUIC_ADC_RESERVED_ACC_5:
 	case MAX77693_MUIC_ADC_CEA936_AUDIO:
@@ -432,60 +733,164 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_TTY_CONVERTER:
 	case MAX77693_MUIC_ADC_UART_CABLE:
 	case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG:
-	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:
 	case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG:
-		/* This accessory isn't used in general case if it is specially
-		   needed to detect additional accessory, should implement
-		   proper operation when this accessory is attached/detached. */
+		/*
+		 * This accessory isn't used in general case if it is specially
+		 * needed to detect additional accessory, should implement
+		 * proper operation when this accessory is attached/detached.
+		 */
 		dev_info(info->dev,
 			"accessory is %s but it isn't used (adc:0x%x)\n",
-			attached ? "attached" : "detached", adc);
-		goto out;
+			attached ? "attached" : "detached", cable_type);
+		return -EAGAIN;
 	default:
 		dev_err(info->dev,
 			"failed to detect %s accessory (adc:0x%x)\n",
-			attached ? "attached" : "detached", adc);
-		ret = -EINVAL;
-		goto out;
+			attached ? "attached" : "detached", cable_type);
+		return -EINVAL;
 	}
 
-out:
-	return ret;
+	return 0;
 }
 
-static int max77693_muic_chg_handler(struct max77693_muic_info *info,
-		int curr_chg_type, bool attached)
+static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 {
-	int ret = 0;
 	int chg_type;
+	int cable_type_gnd;
+	int cable_type;
+	bool attached;
+	bool cable_attached;
+	int ret = 0;
 
-	if (attached) {
-		/* Store previous charger type to control
-		   when charger accessory will be detached */
-		info->prev_chg_type = curr_chg_type;
-		chg_type = curr_chg_type;
-	} else
-		chg_type = info->prev_chg_type;
+	chg_type = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_CHG, &attached);
 
 	dev_info(info->dev,
 		"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
 			attached ? "attached" : "detached",
-			curr_chg_type, info->prev_chg_type);
+			chg_type, info->prev_chg_type);
 
 	switch (chg_type) {
 	case MAX77693_CHARGER_TYPE_USB:
-		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			goto out;
-		extcon_set_cable_state(info->edev, "USB", attached);
+	case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX77693_CHARGER_TYPE_NONE:
+		/* Check MAX77693_CABLE_GROUP_ADC_GND type */
+		cable_type_gnd = max77693_muic_get_cable_type(info,
+					MAX77693_CABLE_GROUP_ADC_GND,
+					&cable_attached);
+		switch (cable_type_gnd) {
+		case MAX77693_MUIC_GND_MHL:
+		case MAX77693_MUIC_GND_MHL_VB:
+			/*
+			 * MHL cable with MHL_TA(USB/TA) cable
+			 * - MHL cable include two port(HDMI line and separate micro-
+			 * usb port. When the target connect MHL cable, extcon driver
+			 * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA
+			 * cable is connected, extcon driver notify state to notifiee
+			 * for charging battery.
+			 *
+			 * Features of 'MHL_TA(USB/TA) with MHL cable'
+			 * - Support MHL
+			 * - Support charging through micro-usb port without data connection
+			 */
+			extcon_set_cable_state(info->edev, "MHL_TA", attached);
+			if (!cable_attached)
+				extcon_set_cable_state(info->edev, "MHL", cable_attached);
+			break;
+		}
+
+		/* Check MAX77693_CABLE_GROUP_ADC type */
+		cable_type = max77693_muic_get_cable_type(info,
+					MAX77693_CABLE_GROUP_ADC,
+					&cable_attached);
+		switch (cable_type) {
+		case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+			/*
+			 * Dock-Audio device with USB/TA cable
+			 * - Dock device include two port(Dock-Audio and micro-usb
+			 * port). When the target connect Dock-Audio device, extcon
+			 * driver check whether USB/TA cable is connected. If USB/TA
+			 * cable is connected, extcon driver notify state to notifiee
+			 * for charging battery.
+			 *
+			 * Features of 'USB/TA cable with Dock-Audio device'
+			 * - Support external output feature of audio.
+			 * - Support charging through micro-usb port without data
+			 *           connection.
+			 */
+			extcon_set_cable_state(info->edev, "USB", attached);
+
+			if (!cable_attached)
+				extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached);
+			break;
+		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+			/*
+			 * Dock-Smart device with USB/TA cable
+			 * - Dock-Desk device include three type of cable which
+			 * are HDMI, USB for mouse/keyboard and micro-usb port
+			 * for USB/TA cable. Dock-Smart device need always exteranl
+			 * power supply(USB/TA cable through micro-usb cable). Dock-
+			 * Smart device support screen output of target to separate
+			 * monitor and mouse/keyboard for desktop mode.
+			 *
+			 * Features of 'USB/TA cable with Dock-Smart device'
+			 * - Support MHL
+			 * - Support external output feature of audio
+			 * - Support charging through micro-usb port without data
+			 *	     connection if TA cable is connected to target.
+			 * - Support charging and data connection through micro-usb port
+			 *           if USB cable is connected between target and host
+			 *	     device.
+			 * - Support OTG device (Mouse/Keyboard)
+			 */
+			ret = max77693_muic_set_path(info, info->path_usb, attached);
+			if (ret < 0)
+				return ret;
+
+			extcon_set_cable_state(info->edev, "Dock-Smart", attached);
+			extcon_set_cable_state(info->edev, "MHL", attached);
+
+			break;
+		}
+
+		/* Check MAX77693_CABLE_GROUP_CHG type */
+		switch (chg_type) {
+		case MAX77693_CHARGER_TYPE_NONE:
+			/*
+			 * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable
+			 * is attached, muic device happen below two interrupt.
+			 * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio.
+			 * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable
+			 *   connected to MHL or Dock-Audio.
+			 * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt
+			 * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt.
+			 *
+			 * If user attach MHL (with USB/TA cable and immediately detach
+			 * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP
+			 * interrupt is happened, USB/TA cable remain connected state to
+			 * target. But USB/TA cable isn't connected to target. The user
+			 * be face with unusual action. So, driver should check this
+			 * situation in spite of, that previous charger type is N/A.
+			 */
+			break;
+		case MAX77693_CHARGER_TYPE_USB:
+			/* Only USB cable, PATH:AP_USB */
+			ret = max77693_muic_set_path(info, info->path_usb, attached);
+			if (ret < 0)
+				return ret;
+
+			extcon_set_cable_state(info->edev, "USB", attached);
+			break;
+		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+			/* Only TA cable */
+			extcon_set_cable_state(info->edev, "TA", attached);
+			break;
+		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
 		extcon_set_cable_state(info->edev,
 				"Charge-downstream", attached);
 		break;
-	case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", attached);
-		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
 		extcon_set_cable_state(info->edev, "Slow-charger", attached);
 		break;
@@ -498,22 +903,18 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info,
 		dev_err(info->dev,
 			"failed to detect %s accessory (chg_type:0x%x)\n",
 			attached ? "attached" : "detached", chg_type);
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
-out:
-	return ret;
+	return 0;
 }
 
 static void max77693_muic_irq_work(struct work_struct *work)
 {
 	struct max77693_muic_info *info = container_of(work,
 			struct max77693_muic_info, irq_work);
-	int curr_adc, curr_chg_type;
 	int irq_type = -1;
 	int i, ret = 0;
-	bool attached = true;
 
 	if (!info->edev)
 		return;
@@ -539,14 +940,7 @@ static void max77693_muic_irq_work(struct work_struct *work)
 	case MAX77693_MUIC_IRQ_INT1_ADC1K:
 		/* Handle all of accessory except for
 		   type of charger accessory */
-		curr_adc = info->status[0] & STATUS1_ADC_MASK;
-		curr_adc >>= STATUS1_ADC_SHIFT;
-
-		/* Check accessory state which is either detached or attached */
-		if (curr_adc == MAX77693_MUIC_ADC_OPEN)
-			attached = false;
-
-		ret = max77693_muic_adc_handler(info, curr_adc, attached);
+		ret = max77693_muic_adc_handler(info);
 		break;
 	case MAX77693_MUIC_IRQ_INT2_CHGTYP:
 	case MAX77693_MUIC_IRQ_INT2_CHGDETREUN:
@@ -555,15 +949,7 @@ static void max77693_muic_irq_work(struct work_struct *work)
 	case MAX77693_MUIC_IRQ_INT2_VBVOLT:
 	case MAX77693_MUIC_IRQ_INT2_VIDRM:
 		/* Handle charger accessory */
-		curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-		curr_chg_type >>= STATUS2_CHGTYP_SHIFT;
-
-		/* Check charger accessory state which
-		   is either detached or attached */
-		if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE)
-			attached = false;
-
-		ret = max77693_muic_chg_handler(info, curr_chg_type, attached);
+		ret = max77693_muic_chg_handler(info);
 		break;
 	case MAX77693_MUIC_IRQ_INT3_EOC:
 	case MAX77693_MUIC_IRQ_INT3_CGMBC:
@@ -575,7 +961,8 @@ static void max77693_muic_irq_work(struct work_struct *work)
 	default:
 		dev_err(info->dev, "muic interrupt: irq %d occurred\n",
 				irq_type);
-		break;
+		mutex_unlock(&info->mutex);
+		return;
 	}
 
 	if (ret < 0)
@@ -604,7 +991,9 @@ static struct regmap_config max77693_muic_regmap_config = {
 static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
 {
 	int ret = 0;
-	int adc, chg_type;
+	int adc;
+	int chg_type;
+	bool attached;
 
 	mutex_lock(&info->mutex);
 
@@ -617,35 +1006,39 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
 		return -EINVAL;
 	}
 
-	adc = info->status[0] & STATUS1_ADC_MASK;
-	adc >>= STATUS1_ADC_SHIFT;
-
-	if (adc != MAX77693_MUIC_ADC_OPEN) {
-		dev_info(info->dev,
-			"external connector is attached (adc:0x%02x)\n", adc);
+	adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC,
+					&attached);
+	if (attached && adc != MAX77693_MUIC_ADC_OPEN) {
+		ret = max77693_muic_adc_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect accessory\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
+	}
 
-		ret = max77693_muic_adc_handler(info, adc, true);
-		if (ret < 0)
-			dev_err(info->dev, "failed to detect accessory\n");
-		goto out;
+	chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG,
+					&attached);
+	if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) {
+		ret = max77693_muic_chg_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect charger accessory\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
 	}
 
-	chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-	chg_type >>= STATUS2_CHGTYP_SHIFT;
+	mutex_unlock(&info->mutex);
 
-	if (chg_type != MAX77693_CHARGER_TYPE_NONE) {
-		dev_info(info->dev,
-			"external connector is attached (chg_type:0x%x)\n",
-			chg_type);
+	return 0;
+}
 
-		max77693_muic_chg_handler(info, chg_type, true);
-		if (ret < 0)
-			dev_err(info->dev, "failed to detect charger accessory\n");
-	}
+static void max77693_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct max77693_muic_info *info = container_of(to_delayed_work(work),
+				struct max77693_muic_info, wq_detcable);
 
-out:
-	mutex_unlock(&info->mutex);
-	return ret;
+	max77693_muic_detect_accessory(info);
 }
 
 static int max77693_muic_probe(struct platform_device *pdev)
@@ -654,7 +1047,9 @@ static int max77693_muic_probe(struct platform_device *pdev)
 	struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
 	struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
 	struct max77693_muic_info *info;
-	int ret, i;
+	int delay_jiffies;
+	int ret;
+	int i;
 	u8 id;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
@@ -678,6 +1073,32 @@ static int max77693_muic_probe(struct platform_device *pdev)
 			return ret;
 		}
 	}
+
+	/* Register input device for button of dock device */
+	info->dock = devm_input_allocate_device(&pdev->dev);
+	if (!info->dock) {
+		dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__);
+		return -ENOMEM;
+	}
+	info->dock->name = "max77693-muic/dock";
+	info->dock->phys = "max77693-muic/extcon";
+	info->dock->dev.parent = &pdev->dev;
+
+	__set_bit(EV_REP, info->dock->evbit);
+
+	input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP);
+	input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN);
+	input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE);
+	input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG);
+	input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG);
+
+	ret = input_register_device(info->dock);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot register input device error(%d)\n",
+				ret);
+		return ret;
+	}
+
 	platform_set_drvdata(pdev, info);
 	mutex_init(&info->mutex);
 
@@ -697,13 +1118,13 @@ static int max77693_muic_probe(struct platform_device *pdev)
 
 		ret = request_threaded_irq(virq, NULL,
 				max77693_muic_irq_handler,
-				IRQF_ONESHOT, muic_irq->name, info);
+				IRQF_NO_SUSPEND,
+				muic_irq->name, info);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"failed: irq request (IRQ: %d,"
 				" error :%d)\n",
 				muic_irq->irq, ret);
-
 			goto err_irq;
 		}
 	}
@@ -749,23 +1170,54 @@ static int max77693_muic_probe(struct platform_device *pdev)
 				= muic_pdata->init_data[i].data;
 	}
 
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	if (muic_pdata->path_uart)
+		info->path_uart = muic_pdata->path_uart;
+	else
+		info->path_uart = CONTROL1_SW_UART;
+
+	if (muic_pdata->path_usb)
+		info->path_usb = muic_pdata->path_usb;
+	else
+		info->path_usb = CONTROL1_SW_USB;
+
+	/* Set initial path for UART */
+	 max77693_muic_set_path(info, info->path_uart, true);
+
 	/* Check revision number of MUIC device*/
 	ret = max77693_read_reg(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_ID, &id);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to read revision number\n");
-		goto err_irq;
+		goto err_extcon;
 	}
 	dev_info(info->dev, "device ID : 0x%x\n", id);
 
 	/* Set ADC debounce time */
 	max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
 
-	/* Detect accessory on boot */
-	max77693_muic_detect_accessory(info);
+	/*
+	 * Detect accessory after completing the initialization of platform
+	 *
+	 * - Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
+	if (muic_pdata->detcable_delay_ms)
+		delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+	else
+		delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+	schedule_delayed_work(&info->wq_detcable, delay_jiffies);
 
 	return ret;
 
+err_extcon:
+	extcon_dev_unregister(info->edev);
 err_irq:
 	while (--i >= 0)
 		free_irq(muic_irqs[i].virq, info);
@@ -780,6 +1232,7 @@ static int max77693_muic_remove(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 		free_irq(muic_irqs[i].virq, info);
 	cancel_work_sync(&info->irq_work);
+	input_unregister_device(info->dock);
 	extcon_dev_unregister(info->edev);
 
 	return 0;
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 93009fe..e636d95 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -29,51 +29,14 @@
 #include <linux/irqdomain.h>
 
 #define	DEV_NAME			"max8997-muic"
+#define	DELAY_MS_DEFAULT		20000		/* unit: millisecond */
 
-/* MAX8997-MUIC STATUS1 register */
-#define STATUS1_ADC_SHIFT		0
-#define STATUS1_ADCLOW_SHIFT		5
-#define STATUS1_ADCERR_SHIFT		6
-#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
-#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
-#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
-
-/* MAX8997-MUIC STATUS2 register */
-#define STATUS2_CHGTYP_SHIFT		0
-#define STATUS2_CHGDETRUN_SHIFT		3
-#define STATUS2_DCDTMR_SHIFT		4
-#define STATUS2_DBCHG_SHIFT		5
-#define STATUS2_VBVOLT_SHIFT		6
-#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
-#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
-#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DBCHG_MASK		(0x1 << STATUS2_DBCHG_SHIFT)
-#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
-
-/* MAX8997-MUIC STATUS3 register */
-#define STATUS3_OVP_SHIFT		2
-#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
-
-/* MAX8997-MUIC CONTROL1 register */
-#define COMN1SW_SHIFT			0
-#define COMP2SW_SHIFT			3
-#define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
-#define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
-#define SW_MASK				(COMP2SW_MASK | COMN1SW_MASK)
-
-#define MAX8997_SW_USB		((1 << COMP2SW_SHIFT) | (1 << COMN1SW_SHIFT))
-#define MAX8997_SW_AUDIO	((2 << COMP2SW_SHIFT) | (2 << COMN1SW_SHIFT))
-#define MAX8997_SW_UART		((3 << COMP2SW_SHIFT) | (3 << COMN1SW_SHIFT))
-#define MAX8997_SW_OPEN		((0 << COMP2SW_SHIFT) | (0 << COMN1SW_SHIFT))
-
-#define	MAX8997_ADC_GROUND		0x00
-#define	MAX8997_ADC_MHL			0x01
-#define	MAX8997_ADC_JIG_USB_1		0x18
-#define	MAX8997_ADC_JIG_USB_2		0x19
-#define	MAX8997_ADC_DESKDOCK		0x1a
-#define	MAX8997_ADC_JIG_UART		0x1c
-#define	MAX8997_ADC_CARDOCK		0x1d
-#define	MAX8997_ADC_OPEN		0x1f
+enum max8997_muic_adc_debounce_time {
+	ADC_DEBOUNCE_TIME_0_5MS = 0,	/* 0.5ms */
+	ADC_DEBOUNCE_TIME_10MS,		/* 10ms */
+	ADC_DEBOUNCE_TIME_25MS,		/* 25ms */
+	ADC_DEBOUNCE_TIME_38_62MS,	/* 38.62ms */
+};
 
 struct max8997_muic_irq {
 	unsigned int irq;
@@ -82,61 +45,303 @@ struct max8997_muic_irq {
 };
 
 static struct max8997_muic_irq muic_irqs[] = {
-	{ MAX8997_MUICIRQ_ADCError, "muic-ADC_error" },
-	{ MAX8997_MUICIRQ_ADCLow, "muic-ADC_low" },
-	{ MAX8997_MUICIRQ_ADC, "muic-ADC" },
-	{ MAX8997_MUICIRQ_VBVolt, "muic-VB_voltage" },
-	{ MAX8997_MUICIRQ_DBChg, "muic-DB_charger" },
-	{ MAX8997_MUICIRQ_DCDTmr, "muic-DCD_timer" },
-	{ MAX8997_MUICIRQ_ChgDetRun, "muic-CDR_status" },
-	{ MAX8997_MUICIRQ_ChgTyp, "muic-charger_type" },
-	{ MAX8997_MUICIRQ_OVP, "muic-over_voltage" },
+	{ MAX8997_MUICIRQ_ADCError,	"muic-ADCERROR" },
+	{ MAX8997_MUICIRQ_ADCLow,	"muic-ADCLOW" },
+	{ MAX8997_MUICIRQ_ADC,		"muic-ADC" },
+	{ MAX8997_MUICIRQ_VBVolt,	"muic-VBVOLT" },
+	{ MAX8997_MUICIRQ_DBChg,	"muic-DBCHG" },
+	{ MAX8997_MUICIRQ_DCDTmr,	"muic-DCDTMR" },
+	{ MAX8997_MUICIRQ_ChgDetRun,	"muic-CHGDETRUN" },
+	{ MAX8997_MUICIRQ_ChgTyp,	"muic-CHGTYP" },
+	{ MAX8997_MUICIRQ_OVP,		"muic-OVP" },
+};
+
+/* Define supported cable type */
+enum max8997_muic_acc_type {
+	MAX8997_MUIC_ADC_GROUND = 0x0,
+	MAX8997_MUIC_ADC_MHL,			/* MHL*/
+	MAX8997_MUIC_ADC_REMOTE_S1_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S2_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S3_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S4_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S5_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S6_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S7_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S8_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S9_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S10_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S11_BUTTON,
+	MAX8997_MUIC_ADC_REMOTE_S12_BUTTON,
+	MAX8997_MUIC_ADC_RESERVED_ACC_1,
+	MAX8997_MUIC_ADC_RESERVED_ACC_2,
+	MAX8997_MUIC_ADC_RESERVED_ACC_3,
+	MAX8997_MUIC_ADC_RESERVED_ACC_4,
+	MAX8997_MUIC_ADC_RESERVED_ACC_5,
+	MAX8997_MUIC_ADC_CEA936_AUDIO,
+	MAX8997_MUIC_ADC_PHONE_POWERED_DEV,
+	MAX8997_MUIC_ADC_TTY_CONVERTER,
+	MAX8997_MUIC_ADC_UART_CABLE,
+	MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG,
+	MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF,	/* JIG-USB-OFF */
+	MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON,	/* JIG-USB-ON */
+	MAX8997_MUIC_ADC_AV_CABLE_NOLOAD,	/* DESKDOCK */
+	MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG,
+	MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF,	/* JIG-UART */
+	MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON,	/* CARDOCK */
+	MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE,
+	MAX8997_MUIC_ADC_OPEN,			/* OPEN */
+};
+
+enum max8997_muic_cable_group {
+	MAX8997_CABLE_GROUP_ADC = 0,
+	MAX8997_CABLE_GROUP_ADC_GND,
+	MAX8997_CABLE_GROUP_CHG,
+	MAX8997_CABLE_GROUP_VBVOLT,
+};
+
+enum max8997_muic_usb_type {
+	MAX8997_USB_HOST,
+	MAX8997_USB_DEVICE,
+};
+
+enum max8997_muic_charger_type {
+	MAX8997_CHARGER_TYPE_NONE = 0,
+	MAX8997_CHARGER_TYPE_USB,
+	MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT,
+	MAX8997_CHARGER_TYPE_DEDICATED_CHG,
+	MAX8997_CHARGER_TYPE_500MA,
+	MAX8997_CHARGER_TYPE_1A,
+	MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7,
 };
 
 struct max8997_muic_info {
 	struct device *dev;
 	struct i2c_client *muic;
-	struct max8997_muic_platform_data *muic_pdata;
+	struct extcon_dev *edev;
+	int prev_cable_type;
+	int prev_chg_type;
+	u8 status[2];
 
 	int irq;
 	struct work_struct irq_work;
+	struct mutex mutex;
 
+	struct max8997_muic_platform_data *muic_pdata;
 	enum max8997_muic_charger_type pre_charger_type;
-	int pre_adc;
 
-	struct mutex mutex;
+	/*
+	 * Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	struct delayed_work wq_detcable;
+
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	int path_usb;
+	int path_uart;
+};
 
-	struct extcon_dev	*edev;
+enum {
+	EXTCON_CABLE_USB = 0,
+	EXTCON_CABLE_USB_HOST,
+	EXTCON_CABLE_TA,
+	EXTCON_CABLE_FAST_CHARGER,
+	EXTCON_CABLE_SLOW_CHARGER,
+	EXTCON_CABLE_CHARGE_DOWNSTREAM,
+	EXTCON_CABLE_MHL,
+	EXTCON_CABLE_DOCK_DESK,
+	EXTCON_CABLE_DOCK_CARD,
+	EXTCON_CABLE_JIG,
+
+	_EXTCON_CABLE_NUM,
 };
 
-const char *max8997_extcon_cable[] = {
-	[0] = "USB",
-	[1] = "USB-Host",
-	[2] = "TA",
-	[3] = "Fast-charger",
-	[4] = "Slow-charger",
-	[5] = "Charge-downstream",
-	[6] = "MHL",
-	[7] = "Dock-desk",
-	[8] = "Dock-card",
-	[9] = "JIG",
+static const char *max8997_extcon_cable[] = {
+	[EXTCON_CABLE_USB]			= "USB",
+	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
+	[EXTCON_CABLE_TA]			= "TA",
+	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
+	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
+	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_CABLE_MHL]			= "MHL",
+	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
+	[EXTCON_CABLE_DOCK_CARD]		= "Dock-Card",
+	[EXTCON_CABLE_JIG]			= "JIG",
 
 	NULL,
 };
 
+/*
+ * max8997_muic_set_debounce_time - Set the debounce time of ADC
+ * @info: the instance including private data of max8997 MUIC
+ * @time: the debounce time of ADC
+ */
+static int max8997_muic_set_debounce_time(struct max8997_muic_info *info,
+		enum max8997_muic_adc_debounce_time time)
+{
+	int ret;
+
+	switch (time) {
+	case ADC_DEBOUNCE_TIME_0_5MS:
+	case ADC_DEBOUNCE_TIME_10MS:
+	case ADC_DEBOUNCE_TIME_25MS:
+	case ADC_DEBOUNCE_TIME_38_62MS:
+		ret = max8997_update_reg(info->muic,
+					  MAX8997_MUIC_REG_CONTROL3,
+					  time << CONTROL3_ADCDBSET_SHIFT,
+					  CONTROL3_ADCDBSET_MASK);
+		if (ret) {
+			dev_err(info->dev, "failed to set ADC debounce time\n");
+			return -EAGAIN;
+		}
+		break;
+	default:
+		dev_err(info->dev, "invalid ADC debounce time\n");
+		return -EINVAL;
+	}
+
+	return 0;
+};
+
+/*
+ * max8997_muic_set_path - Set hardware line according to attached cable
+ * @info: the instance including private data of max8997 MUIC
+ * @value: the path according to attached cable
+ * @attached: the state of cable (true:attached, false:detached)
+ *
+ * The max8997 MUIC device share outside H/W line among a varity of cables,
+ * so this function set internal path of H/W line according to the type of
+ * attached cable.
+ */
+static int max8997_muic_set_path(struct max8997_muic_info *info,
+		u8 val, bool attached)
+{
+	int ret = 0;
+	u8 ctrl1, ctrl2 = 0;
+
+	if (attached)
+		ctrl1 = val;
+	else
+		ctrl1 = CONTROL1_SW_OPEN;
+
+	ret = max8997_update_reg(info->muic,
+			MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to update MUIC register\n");
+		return -EAGAIN;
+	}
+
+	if (attached)
+		ctrl2 |= CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
+	else
+		ctrl2 |= CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
+
+	ret = max8997_update_reg(info->muic,
+			MAX8997_MUIC_REG_CONTROL2, ctrl2,
+			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to update MUIC register\n");
+		return -EAGAIN;
+	}
+
+	dev_info(info->dev,
+		"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+		ctrl1, ctrl2, attached ? "attached" : "detached");
+
+	return 0;
+}
+
+/*
+ * max8997_muic_get_cable_type - Return cable type and check cable state
+ * @info: the instance including private data of max8997 MUIC
+ * @group: the path according to attached cable
+ * @attached: store cable state and return
+ *
+ * This function check the cable state either attached or detached,
+ * and then divide precise type of cable according to cable group.
+ *	- MAX8997_CABLE_GROUP_ADC
+ *	- MAX8997_CABLE_GROUP_CHG
+ */
+static int max8997_muic_get_cable_type(struct max8997_muic_info *info,
+		enum max8997_muic_cable_group group, bool *attached)
+{
+	int cable_type = 0;
+	int adc;
+	int chg_type;
+
+	switch (group) {
+	case MAX8997_CABLE_GROUP_ADC:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & STATUS1_ADC_MASK;
+		adc >>= STATUS1_ADC_SHIFT;
+
+		/*
+		 * Check current cable state/cable type and store cable type
+		 * (info->prev_cable_type) for handling cable when cable is
+		 * detached.
+		 */
+		if (adc == MAX8997_MUIC_ADC_OPEN) {
+			*attached = false;
+
+			cable_type = info->prev_cable_type;
+			info->prev_cable_type = MAX8997_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			cable_type = info->prev_cable_type = adc;
+		}
+		break;
+	case MAX8997_CABLE_GROUP_CHG:
+		/*
+		 * Read charger type to check cable type and decide cable state
+		 * according to type of charger cable.
+		 */
+		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
+		chg_type >>= STATUS2_CHGTYP_SHIFT;
+
+		if (chg_type == MAX8997_CHARGER_TYPE_NONE) {
+			*attached = false;
+
+			cable_type = info->prev_chg_type;
+			info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE;
+		} else {
+			*attached = true;
+
+			/*
+			 * Check current cable state/cable type and store cable
+			 * type(info->prev_chg_type) for handling cable when
+			 * charger cable is detached.
+			 */
+			cable_type = info->prev_chg_type = chg_type;
+		}
+
+		break;
+	default:
+		dev_err(info->dev, "Unknown cable group (%d)\n", group);
+		cable_type = -EINVAL;
+		break;
+	}
+
+	return cable_type;
+}
+
 static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 			enum max8997_muic_usb_type usb_type, bool attached)
 {
 	int ret = 0;
 
 	if (usb_type == MAX8997_USB_HOST) {
-		/* switch to USB */
-		ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
-				attached ? MAX8997_SW_USB : MAX8997_SW_OPEN,
-				SW_MASK);
-		if (ret) {
+		ret = max8997_muic_set_path(info, info->path_usb, attached);
+		if (ret < 0) {
 			dev_err(info->dev, "failed to update muic register\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -148,41 +353,39 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 		extcon_set_cable_state(info->edev, "USB", attached);
 		break;
 	default:
-		ret = -EINVAL;
-		break;
+		dev_err(info->dev, "failed to detect %s usb cable\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
 	}
 
-out:
-	return ret;
+	return 0;
 }
 
 static int max8997_muic_handle_dock(struct max8997_muic_info *info,
-			int adc, bool attached)
+			int cable_type, bool attached)
 {
 	int ret = 0;
 
-	/* switch to AUDIO */
-	ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
-				attached ? MAX8997_SW_AUDIO : MAX8997_SW_OPEN,
-				SW_MASK);
+	ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 	if (ret) {
 		dev_err(info->dev, "failed to update muic register\n");
-		goto out;
+		return ret;
 	}
 
-	switch (adc) {
-	case MAX8997_ADC_DESKDOCK:
+	switch (cable_type) {
+	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 		extcon_set_cable_state(info->edev, "Dock-desk", attached);
 		break;
-	case MAX8997_ADC_CARDOCK:
+	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
 		extcon_set_cable_state(info->edev, "Dock-card", attached);
 		break;
 	default:
-		ret = -EINVAL;
-		break;
+		dev_err(info->dev, "failed to detect %s dock device\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
 	}
-out:
-	return ret;
+
+	return 0;
 }
 
 static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
@@ -191,199 +394,188 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 	int ret = 0;
 
 	/* switch to UART */
-	ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1,
-				attached ? MAX8997_SW_UART : MAX8997_SW_OPEN,
-				SW_MASK);
+	ret = max8997_muic_set_path(info, info->path_uart, attached);
 	if (ret) {
 		dev_err(info->dev, "failed to update muic register\n");
-		goto out;
+		return -EINVAL;
 	}
 
 	extcon_set_cable_state(info->edev, "JIG", attached);
-out:
-	return ret;
-}
-
-static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info)
-{
-	int ret = 0;
 
-	switch (info->pre_adc) {
-	case MAX8997_ADC_GROUND:
-		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false);
-		break;
-	case MAX8997_ADC_MHL:
-		extcon_set_cable_state(info->edev, "MHL", false);
-		break;
-	case MAX8997_ADC_JIG_USB_1:
-	case MAX8997_ADC_JIG_USB_2:
-		ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, false);
-		break;
-	case MAX8997_ADC_DESKDOCK:
-	case MAX8997_ADC_CARDOCK:
-		ret = max8997_muic_handle_dock(info, info->pre_adc, false);
-		break;
-	case MAX8997_ADC_JIG_UART:
-		ret = max8997_muic_handle_jig_uart(info, false);
-		break;
-	default:
-		break;
-	}
-
-	return ret;
+	return 0;
 }
 
-static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
+static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 {
+	int cable_type;
+	bool attached;
 	int ret = 0;
 
-	switch (adc) {
-	case MAX8997_ADC_GROUND:
-		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true);
-		break;
-	case MAX8997_ADC_MHL:
-		extcon_set_cable_state(info->edev, "MHL", true);
-		break;
-	case MAX8997_ADC_JIG_USB_1:
-	case MAX8997_ADC_JIG_USB_2:
-		ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true);
-		break;
-	case MAX8997_ADC_DESKDOCK:
-	case MAX8997_ADC_CARDOCK:
-		ret = max8997_muic_handle_dock(info, adc, true);
-		break;
-	case MAX8997_ADC_JIG_UART:
-		ret = max8997_muic_handle_jig_uart(info, true);
-		break;
-	case MAX8997_ADC_OPEN:
-		ret = max8997_muic_handle_adc_detach(info);
-		break;
-	default:
-		ret = -EINVAL;
-		goto out;
-	}
-
-	info->pre_adc = adc;
-out:
-	return ret;
-}
-
-static int max8997_muic_handle_charger_type_detach(
-				struct max8997_muic_info *info)
-{
-	switch (info->pre_charger_type) {
-	case MAX8997_CHARGER_TYPE_USB:
-		extcon_set_cable_state(info->edev, "USB", false);
-		break;
-	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev, "Charge-downstream", false);
-		break;
-	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", false);
-		break;
-	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", false);
-		break;
-	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", false);
-		break;
+	/* Check cable state which is either detached or attached */
+	cable_type = max8997_muic_get_cable_type(info,
+				MAX8997_CABLE_GROUP_ADC, &attached);
+
+	switch (cable_type) {
+	case MAX8997_MUIC_ADC_GROUND:
+		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX8997_MUIC_ADC_MHL:
+		extcon_set_cable_state(info->edev, "MHL", attached);
+		break;
+	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
+	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
+		ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
+	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
+		ret = max8997_muic_handle_dock(info, cable_type, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF:
+		ret = max8997_muic_handle_jig_uart(info, attached);
+		break;
+	case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON:
+	case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON:
+	case MAX8997_MUIC_ADC_RESERVED_ACC_1:
+	case MAX8997_MUIC_ADC_RESERVED_ACC_2:
+	case MAX8997_MUIC_ADC_RESERVED_ACC_3:
+	case MAX8997_MUIC_ADC_RESERVED_ACC_4:
+	case MAX8997_MUIC_ADC_RESERVED_ACC_5:
+	case MAX8997_MUIC_ADC_CEA936_AUDIO:
+	case MAX8997_MUIC_ADC_PHONE_POWERED_DEV:
+	case MAX8997_MUIC_ADC_TTY_CONVERTER:
+	case MAX8997_MUIC_ADC_UART_CABLE:
+	case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG:
+	case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG:
+	case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE:
+		/*
+		 * This cable isn't used in general case if it is specially
+		 * needed to detect additional cable, should implement
+		 * proper operation when this cable is attached/detached.
+		 */
+		dev_info(info->dev,
+			"cable is %s but it isn't used (type:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
+		return -EAGAIN;
 	default:
+		dev_err(info->dev,
+			"failed to detect %s unknown cable (type:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
 		return -EINVAL;
-		break;
 	}
 
 	return 0;
 }
 
-static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
-				enum max8997_muic_charger_type charger_type)
+static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 {
-	u8 adc;
-	int ret;
+	int chg_type;
+	bool attached;
+	int adc;
 
-	ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_STATUS1, &adc);
-	if (ret) {
-		dev_err(info->dev, "failed to read muic register\n");
-		goto out;
-	}
+	chg_type = max8997_muic_get_cable_type(info,
+				MAX8997_CABLE_GROUP_CHG, &attached);
 
-	switch (charger_type) {
+	switch (chg_type) {
 	case MAX8997_CHARGER_TYPE_NONE:
-		ret = max8997_muic_handle_charger_type_detach(info);
 		break;
 	case MAX8997_CHARGER_TYPE_USB:
-		if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) {
+		adc = info->status[0] & STATUS1_ADC_MASK;
+		adc >>= STATUS1_ADC_SHIFT;
+
+		if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) {
 			max8997_muic_handle_usb(info,
-					MAX8997_USB_DEVICE, true);
+					MAX8997_USB_DEVICE, attached);
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev, "Charge-downstream", true);
+		extcon_set_cable_state(info->edev, "Charge-downstream", attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", true);
+		extcon_set_cable_state(info->edev, "TA", attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", true);
+		extcon_set_cable_state(info->edev, "Slow-charger", attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", true);
+		extcon_set_cable_state(info->edev, "Fast-charger", attached);
 		break;
 	default:
-		ret = -EINVAL;
-		goto out;
+		dev_err(info->dev,
+			"failed to detect %s unknown chg cable (type:0x%x)\n",
+			attached ? "attached" : "detached", chg_type);
+		return -EINVAL;
 	}
 
-	info->pre_charger_type = charger_type;
-out:
-	return ret;
+	return 0;
 }
 
 static void max8997_muic_irq_work(struct work_struct *work)
 {
 	struct max8997_muic_info *info = container_of(work,
 			struct max8997_muic_info, irq_work);
-	u8 status[2];
-	u8 adc, chg_type;
 	int irq_type = 0;
 	int i, ret;
 
+	if (!info->edev)
+		return;
+
 	mutex_lock(&info->mutex);
 
+	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
+		if (info->irq == muic_irqs[i].virq)
+			irq_type = muic_irqs[i].irq;
+
 	ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
-				2, status);
+				2, info->status);
 	if (ret) {
 		dev_err(info->dev, "failed to read muic register\n");
 		mutex_unlock(&info->mutex);
 		return;
 	}
 
-	dev_dbg(info->dev, "%s: STATUS1:0x%x, 2:0x%x\n", __func__,
-			status[0], status[1]);
-
-	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
-		if (info->irq == muic_irqs[i].virq)
-			irq_type = muic_irqs[i].irq;
-
 	switch (irq_type) {
+	case MAX8997_MUICIRQ_ADCError:
+	case MAX8997_MUICIRQ_ADCLow:
 	case MAX8997_MUICIRQ_ADC:
-		adc = status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
-
-		max8997_muic_handle_adc(info, adc);
+		/* Handle all of cable except for charger cable */
+		ret = max8997_muic_adc_handler(info);
 		break;
+	case MAX8997_MUICIRQ_VBVolt:
+	case MAX8997_MUICIRQ_DBChg:
+	case MAX8997_MUICIRQ_DCDTmr:
+	case MAX8997_MUICIRQ_ChgDetRun:
 	case MAX8997_MUICIRQ_ChgTyp:
-		chg_type = status[1] & STATUS2_CHGTYP_MASK;
-		chg_type >>= STATUS2_CHGTYP_SHIFT;
-
-		max8997_muic_handle_charger_type(info, chg_type);
+		/* Handle charger cable */
+		ret = max8997_muic_chg_handler(info);
+		break;
+	case MAX8997_MUICIRQ_OVP:
 		break;
 	default:
 		dev_info(info->dev, "misc interrupt: irq %d occurred\n",
 				irq_type);
-		break;
+		mutex_unlock(&info->mutex);
+		return;
 	}
 
+	if (ret < 0)
+		dev_err(info->dev, "failed to handle MUIC interrupt\n");
+
 	mutex_unlock(&info->mutex);
 
 	return;
@@ -401,29 +593,60 @@ static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void max8997_muic_detect_dev(struct max8997_muic_info *info)
+static int max8997_muic_detect_dev(struct max8997_muic_info *info)
 {
-	int ret;
-	u8 status[2], adc, chg_type;
+	int ret = 0;
+	int adc;
+	int chg_type;
+	bool attached;
 
-	ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
-				2, status);
+	mutex_lock(&info->mutex);
+
+	/* Read STATUSx register to detect accessory */
+	ret = max8997_bulk_read(info->muic,
+			MAX8997_MUIC_REG_STATUS1, 2, info->status);
 	if (ret) {
-		dev_err(info->dev, "failed to read muic register\n");
-		return;
+		dev_err(info->dev, "failed to read MUIC register\n");
+		mutex_unlock(&info->mutex);
+		return -EINVAL;
 	}
 
-	dev_info(info->dev, "STATUS1:0x%x, STATUS2:0x%x\n",
-			status[0], status[1]);
+	adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC,
+					&attached);
+	if (attached && adc != MAX8997_MUIC_ADC_OPEN) {
+		ret = max8997_muic_adc_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect ADC cable\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
+	}
 
-	adc = status[0] & STATUS1_ADC_MASK;
-	adc >>= STATUS1_ADC_SHIFT;
+	chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG,
+					&attached);
+	if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) {
+		ret = max8997_muic_chg_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect charger cable\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
+	}
+
+	mutex_unlock(&info->mutex);
+
+	return 0;
+}
 
-	chg_type = status[1] & STATUS2_CHGTYP_MASK;
-	chg_type >>= STATUS2_CHGTYP_SHIFT;
+static void max8997_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct max8997_muic_info *info = container_of(to_delayed_work(work),
+				struct max8997_muic_info, wq_detcable);
+	int ret;
 
-	max8997_muic_handle_adc(info, adc);
-	max8997_muic_handle_charger_type(info, chg_type);
+	ret = max8997_muic_detect_dev(info);
+	if (ret < 0)
+		pr_err("failed to detect cable type\n");
 }
 
 static int max8997_muic_probe(struct platform_device *pdev)
@@ -431,6 +654,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
 	struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
 	struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
 	struct max8997_muic_info *info;
+	int delay_jiffies;
 	int ret, i;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info),
@@ -459,8 +683,10 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		}
 		muic_irq->virq = virq;
 
-		ret = request_threaded_irq(virq, NULL, max8997_muic_irq_handler,
-				0, muic_irq->name, info);
+		ret = request_threaded_irq(virq, NULL,
+				max8997_muic_irq_handler,
+				IRQF_NO_SUSPEND,
+				muic_irq->name, info);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"failed: irq request (IRQ: %d,"
@@ -496,10 +722,42 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Initial device detection */
-	max8997_muic_detect_dev(info);
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	if (pdata->muic_pdata->path_uart)
+		info->path_uart = pdata->muic_pdata->path_uart;
+	else
+		info->path_uart = CONTROL1_SW_UART;
+
+	if (pdata->muic_pdata->path_usb)
+		info->path_usb = pdata->muic_pdata->path_usb;
+	else
+		info->path_usb = CONTROL1_SW_USB;
+
+	/* Set initial path for UART */
+	 max8997_muic_set_path(info, info->path_uart, true);
+
+	/* Set ADC debounce time */
+	max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
+
+	/*
+	 * Detect accessory after completing the initialization of platform
+	 *
+	 * - Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
+	if (pdata->muic_pdata->detcable_delay_ms)
+		delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms);
+	else
+		delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+	schedule_delayed_work(&info->wq_detcable, delay_jiffies);
 
-	return ret;
+	return 0;
 
 err_irq:
 	while (--i >= 0)