Merge tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

4 files changed, 91 insertions, 76 deletions

diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index ab770ad..13ba3a6 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -18,8 +18,6 @@
  */
 
 #include <linux/extcon-provider.h>
-#include <linux/extcon/extcon-gpio.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -29,14 +27,30 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
+/**
+ * struct gpio_extcon_data - A simple GPIO-controlled extcon device state container.
+ * @edev:		Extcon device.
+ * @irq:		Interrupt line for the external connector.
+ * @work:		Work fired by the interrupt.
+ * @debounce_jiffies:	Number of jiffies to wait for the GPIO to stabilize, from the debounce
+ *			value.
+ * @gpiod:		GPIO descriptor for this external connector.
+ * @extcon_id:		The unique id of specific external connector.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @check_on_resume:	Boolean describing whether to check the state of gpio
+ *			while resuming from sleep.
+ */
 struct gpio_extcon_data {
 	struct extcon_dev *edev;
 	int irq;
 	struct delayed_work work;
 	unsigned long debounce_jiffies;
-
-	struct gpio_desc *id_gpiod;
-	struct gpio_extcon_pdata *pdata;
+	struct gpio_desc *gpiod;
+	unsigned int extcon_id;
+	unsigned long debounce;
+	unsigned long irq_flags;
+	bool check_on_resume;
 };
 
 static void gpio_extcon_work(struct work_struct *work)
@@ -46,11 +60,8 @@ static void gpio_extcon_work(struct work_struct *work)
 		container_of(to_delayed_work(work), struct gpio_extcon_data,
 			     work);
 
-	state = gpiod_get_value_cansleep(data->id_gpiod);
-	if (data->pdata->gpio_active_low)
-		state = !state;
-
-	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
+	state = gpiod_get_value_cansleep(data->gpiod);
+	extcon_set_state_sync(data->edev, data->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
@@ -62,65 +73,41 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
-{
-	struct gpio_extcon_pdata *pdata = data->pdata;
-	int ret;
-
-	ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
-				dev_name(dev));
-	if (ret < 0)
-		return ret;
-
-	data->id_gpiod = gpio_to_desc(pdata->gpio);
-	if (!data->id_gpiod)
-		return -EINVAL;
-
-	if (pdata->debounce) {
-		ret = gpiod_set_debounce(data->id_gpiod,
-					pdata->debounce * 1000);
-		if (ret < 0)
-			data->debounce_jiffies =
-				msecs_to_jiffies(pdata->debounce);
-	}
-
-	data->irq = gpiod_to_irq(data->id_gpiod);
-	if (data->irq < 0)
-		return data->irq;
-
-	return 0;
-}
-
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_extcon_data *data;
+	struct device *dev = &pdev->dev;
 	int ret;
 
-	if (!pdata)
-		return -EBUSY;
-	if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
-		return -EINVAL;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
-				   GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct gpio_extcon_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-	data->pdata = pdata;
 
-	/* Initialize the gpio */
-	ret = gpio_extcon_init(&pdev->dev, data);
-	if (ret < 0)
-		return ret;
+	/*
+	 * FIXME: extcon_id represents the unique identifier of external
+	 * connectors such as EXTCON_USB, EXTCON_DISP_HDMI and so on. extcon_id
+	 * is necessary to register the extcon device. But, it's not yet
+	 * developed to get the extcon id from device-tree or others.
+	 * On later, it have to be solved.
+	 */
+	if (!data->irq_flags || data->extcon_id > EXTCON_NONE)
+		return -EINVAL;
+
+	data->gpiod = devm_gpiod_get(dev, "extcon", GPIOD_IN);
+	if (IS_ERR(data->gpiod))
+		return PTR_ERR(data->gpiod);
+	data->irq = gpiod_to_irq(data->gpiod);
+	if (data->irq <= 0)
+		return data->irq;
 
 	/* Allocate the memory of extcon devie and register extcon device */
-	data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
+	data->edev = devm_extcon_dev_allocate(dev, &data->extcon_id);
 	if (IS_ERR(data->edev)) {
-		dev_err(&pdev->dev, "failed to allocate extcon device\n");
+		dev_err(dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
 
-	ret = devm_extcon_dev_register(&pdev->dev, data->edev);
+	ret = devm_extcon_dev_register(dev, data->edev);
 	if (ret < 0)
 		return ret;
 
@@ -130,8 +117,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 	 * Request the interrupt of gpio to detect whether external connector
 	 * is attached or detached.
 	 */
-	ret = devm_request_any_context_irq(&pdev->dev, data->irq,
-					gpio_irq_handler, pdata->irq_flags,
+	ret = devm_request_any_context_irq(dev, data->irq,
+					gpio_irq_handler, data->irq_flags,
 					pdev->name, data);
 	if (ret < 0)
 		return ret;
@@ -158,7 +145,7 @@ static int gpio_extcon_resume(struct device *dev)
 	struct gpio_extcon_data *data;
 
 	data = dev_get_drvdata(dev);
-	if (data->pdata->check_on_resume)
+	if (data->check_on_resume)
 		queue_delayed_work(system_power_efficient_wq,
 			&data->work, data->debounce_jiffies);
 
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 7c4bc8c..b7e9ea3 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -66,6 +66,8 @@
 
 #define CHT_WC_VBUS_GPIO_CTLO		0x6e2d
 #define CHT_WC_VBUS_GPIO_CTLO_OUTPUT	BIT(0)
+#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD	BIT(4)
+#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT	BIT(5)
 
 enum cht_wc_usb_id {
 	USB_ID_OTG,
@@ -183,14 +185,15 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
 {
 	int ret, val;
 
-	val = enable ? CHT_WC_VBUS_GPIO_CTLO_OUTPUT : 0;
-
 	/*
 	 * The 5V boost converter is enabled through a gpio on the PMIC, since
 	 * there currently is no gpio driver we access the gpio reg directly.
 	 */
-	ret = regmap_update_bits(ext->regmap, CHT_WC_VBUS_GPIO_CTLO,
-				 CHT_WC_VBUS_GPIO_CTLO_OUTPUT, val);
+	val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT;
+	if (enable)
+		val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT;
+
+	ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val);
 	if (ret)
 		dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
 }
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index 191e99f..acaccb1 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -50,7 +50,11 @@ static const struct acpi_gpio_params vbus_gpios = { INT3496_GPIO_VBUS_EN, 0, fal
 static const struct acpi_gpio_params mux_gpios = { INT3496_GPIO_USB_MUX, 0, false };
 
 static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = {
-	{ "id-gpios", &id_gpios, 1 },
+	/*
+	 * Some platforms have a bug in ACPI GPIO description making IRQ
+	 * GPIO to be output only. Ask the GPIO core to ignore this limit.
+	 */
+	{ "id-gpios", &id_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
 	{ "vbus-gpios", &vbus_gpios, 1 },
 	{ "mux-gpios", &mux_gpios, 1 },
 	{ },
@@ -112,9 +116,6 @@ static int int3496_probe(struct platform_device *pdev)
 		ret = PTR_ERR(data->gpio_usb_id);
 		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
 		return ret;
-	} else if (gpiod_get_direction(data->gpio_usb_id) != GPIOF_DIR_IN) {
-		dev_warn(dev, FW_BUG "USB ID GPIO not in input mode, fixing\n");
-		gpiod_direction_input(data->gpio_usb_id);
 	}
 
 	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index cb38c27..8bff5fd 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1336,6 +1336,28 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 EXPORT_SYMBOL_GPL(extcon_dev_unregister);
 
 #ifdef CONFIG_OF
+
+/*
+ * extcon_find_edev_by_node - Find the extcon device from devicetree.
+ * @node	: OF node identifying edev
+ *
+ * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
+ */
+struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
+{
+	struct extcon_dev *edev;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(edev, &extcon_dev_list, entry)
+		if (edev->dev.parent && edev->dev.parent->of_node == node)
+			goto out;
+	edev = ERR_PTR(-EPROBE_DEFER);
+out:
+	mutex_unlock(&extcon_dev_list_lock);
+
+	return edev;
+}
+
 /*
  * extcon_get_edev_by_phandle - Get the extcon device from devicetree.
  * @dev		: the instance to the given device
@@ -1363,25 +1385,27 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-ENODEV);
 	}
 
-	mutex_lock(&extcon_dev_list_lock);
-	list_for_each_entry(edev, &extcon_dev_list, entry) {
-		if (edev->dev.parent && edev->dev.parent->of_node == node) {
-			mutex_unlock(&extcon_dev_list_lock);
-			of_node_put(node);
-			return edev;
-		}
-	}
-	mutex_unlock(&extcon_dev_list_lock);
+	edev = extcon_find_edev_by_node(node);
 	of_node_put(node);
 
-	return ERR_PTR(-EPROBE_DEFER);
+	return edev;
 }
+
 #else
+
+struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 {
 	return ERR_PTR(-ENOSYS);
 }
+
 #endif /* CONFIG_OF */
+
+EXPORT_SYMBOL_GPL(extcon_find_edev_by_node);
 EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
 
 /**