diff options
| author | Jarkko Lavinen <jlavi@iki.fi> | 2008-12-01 13:14:06 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-12-01 19:55:25 -0800 |
| commit | 307d114441f905e4576871ff28d06408a1af1a7e (patch) | |
| tree | f2116fe4c491ebb58817cb1017ba2ffaf954f9af /drivers/edac | |
| parent | bca404afdc5206c3bb30168315ee8a98a579ec65 (diff) | |
| download | op-kernel-dev-307d114441f905e4576871ff28d06408a1af1a7e.zip op-kernel-dev-307d114441f905e4576871ff28d06408a1af1a7e.tar.gz | |
i82875p_edac: fix overflow device resource setup
When I do "modprobe i82875p_edac" on my Asus P4C800 MB on kernels 2.6.26
or later, the module load fails due to BAR 0 collision. On 2.6.25 the
module loads just fine.
The overflow device on the MB seems to be hidden and its resources are not
allocated at normal PCI bus init. Log shows the missing resource problem:
EDAC DEBUG: i82875p_probe1()
PCI: 0000:00:06.0 reg 10 32bit mmio: [fecf0000, fecf0fff]
pci 0000:00:06.0: device not available because of BAR 0
[0xfecf0000-0xfecf0fff] collisions
EDAC i82875p: i82875p_setup_overfl_dev(): Failed to enable overflow
device
The patch below fixes this by calling pci_bus_assign_resources() after
the overflow device is revealed and added to the bus. With this patch
I am again able to load and use the module.
Signed-off-by: Jarkko Lavinen <jlavi@iki.fi>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/edac')
| -rw-r--r-- | drivers/edac/i82875p_edac.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index e43bdc4..7f90997 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -295,6 +295,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, "%s(): pci_bus_add_device() Failed\n", __func__); } + pci_bus_assign_resources(dev->bus); } *ovrfl_pdev = dev; |
