diff options
| author | Ira W. Snyder <iws@ovro.caltech.edu> | 2009-04-23 16:17:54 -0700 |
|---|---|---|
| committer | Dan Williams <dan.j.williams@intel.com> | 2009-06-16 11:29:17 -0700 |
| commit | a7aea373b4ca428f1be2c1fedd2f26c8e3f2864d (patch) | |
| tree | ca05d01f882aee0f5fd54fd6f649ca0ab566f938 /drivers/dma/fsldma.c | |
| parent | 07a2039b8eb0af4ff464efd3dfd95de5c02648c6 (diff) | |
| download | op-kernel-dev-a7aea373b4ca428f1be2c1fedd2f26c8e3f2864d.zip op-kernel-dev-a7aea373b4ca428f1be2c1fedd2f26c8e3f2864d.tar.gz | |
fsldma: use PCI Read Multiple command
By default, the Freescale 83xx DMA controller uses the PCI Read Line
command when reading data over the PCI bus. Setting the controller to use
the PCI Read Multiple command instead allows the controller to read much
larger bursts of data, which provides a drastic speed increase.
The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI
bridge was between the devices trying to communicate.
A simple test driver showed an increase from 4MB/sec to 116MB/sec when
performing DMA over the PCI bus. Using DMA to transfer between blocks of
local SDRAM showed no change in performance with this patch. The dmatest
driver was also used to verify the correctness of the transfers, and showed
no errors.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Timur Tabi <timur@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma/fsldma.c')
| -rw-r--r-- | drivers/dma/fsldma.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index f18d1bd..a1cb25e 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -12,6 +12,11 @@ * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. * The support for MPC8349 DMA contorller is also added. * + * This driver instructs the DMA controller to issue the PCI Read Multiple + * command for PCI read operations, instead of using the default PCI Read Line + * command. Please be aware that this setting may result in read pre-fetching + * on some platforms. + * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan) case FSL_DMA_IP_83XX: /* Set the channel to below modes: * EOTIE - End-of-transfer interrupt enable + * PRC_RM - PCI read multiple */ - DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE, - 32); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE + | FSL_DMA_MR_PRC_RM, 32); break; } |
