summaryrefslogtreecommitdiffstats
path: root/drivers/dma/ep93xx_dma.c
diff options
context:
space:
mode:
authorRafal Prylowski <prylowski@metasoft.pl>2012-04-19 11:19:00 +0200
committerRyan Mallon <rmallon@gmail.com>2012-04-20 08:37:19 +1000
commit2b3c83efc9a653af6a24799eeb1a2900ba0439e6 (patch)
tree27e96e2942b8d2c7ae04655796f20d83bfe20735 /drivers/dma/ep93xx_dma.c
parent5528a8469fbc01db218fbc00ebec1e3fc088e759 (diff)
downloadop-kernel-dev-2b3c83efc9a653af6a24799eeb1a2900ba0439e6.zip
op-kernel-dev-2b3c83efc9a653af6a24799eeb1a2900ba0439e6.tar.gz
dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channels
Add double buffering support for M2M DMA channels. Implement this by using EP93xx M2M DMA Buffer and Control Finite State Machines to be sure that we are not disabling the channel when it's actually operating. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Diffstat (limited to 'drivers/dma/ep93xx_dma.c')
-rw-r--r--drivers/dma/ep93xx_dma.c117
1 files changed, 93 insertions, 24 deletions
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index e6f133b..bbfbb06 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -71,6 +71,7 @@
#define M2M_CONTROL_TM_SHIFT 13
#define M2M_CONTROL_TM_TX (1 << M2M_CONTROL_TM_SHIFT)
#define M2M_CONTROL_TM_RX (2 << M2M_CONTROL_TM_SHIFT)
+#define M2M_CONTROL_NFBINT BIT(21)
#define M2M_CONTROL_RSS_SHIFT 22
#define M2M_CONTROL_RSS_SSPRX (1 << M2M_CONTROL_RSS_SHIFT)
#define M2M_CONTROL_RSS_SSPTX (2 << M2M_CONTROL_RSS_SHIFT)
@@ -79,7 +80,22 @@
#define M2M_CONTROL_PWSC_SHIFT 25
#define M2M_INTERRUPT 0x0004
-#define M2M_INTERRUPT_DONEINT BIT(1)
+#define M2M_INTERRUPT_MASK 6
+
+#define M2M_STATUS 0x000c
+#define M2M_STATUS_CTL_SHIFT 1
+#define M2M_STATUS_CTL_IDLE (0 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_STALL (1 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MEMRD (2 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MEMWR (3 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_BWCWAIT (4 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MASK (7 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_BUF_SHIFT 4
+#define M2M_STATUS_BUF_NO (0 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_ON (1 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_NEXT (2 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_MASK (3 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_DONE BIT(6)
#define M2M_BCR0 0x0010
#define M2M_BCR1 0x0014
@@ -426,15 +442,6 @@ static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac)
/*
* M2M DMA implementation
- *
- * For the M2M transfers we don't use NFB at all. This is because it simply
- * doesn't work well with memcpy transfers. When you submit both buffers it is
- * extremely unlikely that you get an NFB interrupt, but it instead reports
- * DONE interrupt and both buffers are already transferred which means that we
- * weren't able to update the next buffer.
- *
- * So for now we "simulate" NFB by just submitting buffer after buffer
- * without double buffering.
*/
static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
@@ -543,6 +550,11 @@ static void m2m_hw_submit(struct ep93xx_dma_chan *edmac)
m2m_fill_desc(edmac);
control |= M2M_CONTROL_DONEINT;
+ if (ep93xx_dma_advance_active(edmac)) {
+ m2m_fill_desc(edmac);
+ control |= M2M_CONTROL_NFBINT;
+ }
+
/*
* Now we can finally enable the channel. For M2M channel this must be
* done _after_ the BCRx registers are programmed.
@@ -560,32 +572,89 @@ static void m2m_hw_submit(struct ep93xx_dma_chan *edmac)
}
}
+/*
+ * According to EP93xx User's Guide, we should receive DONE interrupt when all
+ * M2M DMA controller transactions complete normally. This is not always the
+ * case - sometimes EP93xx M2M DMA asserts DONE interrupt when the DMA channel
+ * is still running (channel Buffer FSM in DMA_BUF_ON state, and channel
+ * Control FSM in DMA_MEM_RD state, observed at least in IDE-DMA operation).
+ * In effect, disabling the channel when only DONE bit is set could stop
+ * currently running DMA transfer. To avoid this, we use Buffer FSM and
+ * Control FSM to check current state of DMA channel.
+ */
static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac)
{
+ u32 status = readl(edmac->regs + M2M_STATUS);
+ u32 ctl_fsm = status & M2M_STATUS_CTL_MASK;
+ u32 buf_fsm = status & M2M_STATUS_BUF_MASK;
+ bool done = status & M2M_STATUS_DONE;
+ bool last_done;
u32 control;
+ struct ep93xx_dma_desc *desc;
- if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_DONEINT))
+ /* Accept only DONE and NFB interrupts */
+ if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_MASK))
return INTERRUPT_UNKNOWN;
- /* Clear the DONE bit */
- writel(0, edmac->regs + M2M_INTERRUPT);
+ if (done) {
+ /* Clear the DONE bit */
+ writel(0, edmac->regs + M2M_INTERRUPT);
+ }
- /* Disable interrupts and the channel */
- control = readl(edmac->regs + M2M_CONTROL);
- control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_ENABLE);
- writel(control, edmac->regs + M2M_CONTROL);
+ /*
+ * Check whether we are done with descriptors or not. This, together
+ * with DMA channel state, determines action to take in interrupt.
+ */
+ desc = ep93xx_dma_get_active(edmac);
+ last_done = !desc || desc->txd.cookie;
/*
- * Since we only get DONE interrupt we have to find out ourselves
- * whether there still is something to process. So we try to advance
- * the chain an see whether it succeeds.
+ * Use M2M DMA Buffer FSM and Control FSM to check current state of
+ * DMA channel. Using DONE and NFB bits from channel status register
+ * or bits from channel interrupt register is not reliable.
*/
- if (ep93xx_dma_advance_active(edmac)) {
- edmac->edma->hw_submit(edmac);
- return INTERRUPT_NEXT_BUFFER;
+ if (!last_done &&
+ (buf_fsm == M2M_STATUS_BUF_NO ||
+ buf_fsm == M2M_STATUS_BUF_ON)) {
+ /*
+ * Two buffers are ready for update when Buffer FSM is in
+ * DMA_NO_BUF state. Only one buffer can be prepared without
+ * disabling the channel or polling the DONE bit.
+ * To simplify things, always prepare only one buffer.
+ */
+ if (ep93xx_dma_advance_active(edmac)) {
+ m2m_fill_desc(edmac);
+ if (done && !edmac->chan.private) {
+ /* Software trigger for memcpy channel */
+ control = readl(edmac->regs + M2M_CONTROL);
+ control |= M2M_CONTROL_START;
+ writel(control, edmac->regs + M2M_CONTROL);
+ }
+ return INTERRUPT_NEXT_BUFFER;
+ } else {
+ last_done = true;
+ }
+ }
+
+ /*
+ * Disable the channel only when Buffer FSM is in DMA_NO_BUF state
+ * and Control FSM is in DMA_STALL state.
+ */
+ if (last_done &&
+ buf_fsm == M2M_STATUS_BUF_NO &&
+ ctl_fsm == M2M_STATUS_CTL_STALL) {
+ /* Disable interrupts and the channel */
+ control = readl(edmac->regs + M2M_CONTROL);
+ control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_NFBINT
+ | M2M_CONTROL_ENABLE);
+ writel(control, edmac->regs + M2M_CONTROL);
+ return INTERRUPT_DONE;
}
- return INTERRUPT_DONE;
+ /*
+ * Nothing to do this time.
+ */
+ return INTERRUPT_NEXT_BUFFER;
}
/*
OpenPOWER on IntegriCloud