summaryrefslogtreecommitdiffstats
path: root/drivers/dma/amba-pl08x.c
diff options
context:
space:
mode:
authorRussell King - ARM Linux <linux@arm.linux.org.uk>2011-01-27 12:32:53 +0000
committerDan Williams <dan.j.williams@intel.com>2011-01-30 22:00:48 -0800
commitfb526210b2b961b5d590b89fd8f45c0ca5769688 (patch)
tree4998a89c11eed597b3197d013ff7b558c9566f2d /drivers/dma/amba-pl08x.c
parentd718f4ebddcb0bebdbf771a6672756b666e5c31b (diff)
downloadop-kernel-dev-fb526210b2b961b5d590b89fd8f45c0ca5769688.zip
op-kernel-dev-fb526210b2b961b5d590b89fd8f45c0ca5769688.tar.gz
DMA: PL08x: fix infinite wait when terminating transfers
If we try to pause a channel when terminating a transfer, we could end up spinning for it to become inactive indefinitely, and can result in an uninterruptible wait requiring a reset to recover from. Terminating a transfer is supposed to take effect immediately, but may result in data loss. To make this clear, rename the function to pl08x_terminate_phy_chan(). Also, make sure it is always consistently called - with the spinlock held and IRQs disabled, and ensure that the TC and ERR interrupt status is always cleared. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
-rw-r--r--drivers/dma/amba-pl08x.c32
1 files changed, 18 insertions, 14 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 297f48b..8321a39 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -267,19 +267,24 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
}
-/* Stops the channel */
-static void pl08x_stop_phy_chan(struct pl08x_phy_chan *ch)
+/*
+ * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
+ * clears any pending interrupt status. This should not be used for
+ * an on-going transfer, but as a method of shutting down a channel
+ * (eg, when it's no longer used) or terminating a transfer.
+ */
+static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
+ struct pl08x_phy_chan *ch)
{
- u32 val;
+ u32 val = readl(ch->base + PL080_CH_CONFIG);
- pl08x_pause_phy_chan(ch);
+ val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
+ PL080_CONFIG_TC_IRQ_MASK);
- /* Disable channel */
- val = readl(ch->base + PL080_CH_CONFIG);
- val &= ~PL080_CONFIG_ENABLE;
- val &= ~PL080_CONFIG_ERR_IRQ_MASK;
- val &= ~PL080_CONFIG_TC_IRQ_MASK;
writel(val, ch->base + PL080_CH_CONFIG);
+
+ writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
+ writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
}
static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -404,13 +409,12 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
{
unsigned long flags;
+ spin_lock_irqsave(&ch->lock, flags);
+
/* Stop the channel and clear its interrupts */
- pl08x_stop_phy_chan(ch);
- writel((1 << ch->id), pl08x->base + PL080_ERR_CLEAR);
- writel((1 << ch->id), pl08x->base + PL080_TC_CLEAR);
+ pl08x_terminate_phy_chan(pl08x, ch);
/* Mark it as free */
- spin_lock_irqsave(&ch->lock, flags);
ch->serving = NULL;
spin_unlock_irqrestore(&ch->lock, flags);
}
@@ -1449,7 +1453,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
plchan->state = PL08X_CHAN_IDLE;
if (plchan->phychan) {
- pl08x_stop_phy_chan(plchan->phychan);
+ pl08x_terminate_phy_chan(pl08x, plchan->phychan);
/*
* Mark physical channel as free and free any slave
OpenPOWER on IntegriCloud