summaryrefslogtreecommitdiffstats
path: root/drivers/dma/amba-pl08x.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-10 13:37:36 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-10 13:37:36 -0700
commitec5b103ecfde929004b691f29183255aeeadecd5 (patch)
tree3b16d0654c074b5b36d06e56110c7218a8685655 /drivers/dma/amba-pl08x.c
parentd0048f0b91ee35ab940ec6cbdfdd238c55b12a14 (diff)
parent5622ff1a4dd7dcb1c09953d8066a4e7c4c350b2d (diff)
downloadop-kernel-dev-ec5b103ecfde929004b691f29183255aeeadecd5.zip
op-kernel-dev-ec5b103ecfde929004b691f29183255aeeadecd5.tar.gz
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
-rw-r--r--drivers/dma/amba-pl08x.c501
1 files changed, 363 insertions, 138 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index bff41d4..fce46c5 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -24,6 +24,7 @@
*
* Documentation: ARM DDI 0196G == PL080
* Documentation: ARM DDI 0218E == PL081
+ * Documentation: S3C6410 User's Manual == PL080S
*
* PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
* channel.
@@ -36,6 +37,14 @@
*
* The PL080 has a dual bus master, PL081 has a single master.
*
+ * PL080S is a version modified by Samsung and used in S3C64xx SoCs.
+ * It differs in following aspects:
+ * - CH_CONFIG register at different offset,
+ * - separate CH_CONTROL2 register for transfer size,
+ * - bigger maximum transfer size,
+ * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word,
+ * - no support for peripheral flow control.
+ *
* Memory to peripheral transfer may be visualized as
* Get data from memory to DMAC
* Until no data left
@@ -64,10 +73,7 @@
* - Peripheral flow control: the transfer size is ignored (and should be
* zero). The data is transferred from the current LLI entry, until
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
- * will then move to the next LLI entry.
- *
- * Global TODO:
- * - Break out common code from arch/arm/mach-s3c64xx and share
+ * will then move to the next LLI entry. Unsupported by PL080S.
*/
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
@@ -100,24 +106,16 @@ struct pl08x_driver_data;
* @nomadik: whether the channels have Nomadik security extension bits
* that need to be checked for permission before use and some registers are
* missing
+ * @pl080s: whether this version is a PL080S, which has separate register and
+ * LLI word for transfer size.
*/
struct vendor_data {
+ u8 config_offset;
u8 channels;
bool dualmaster;
bool nomadik;
-};
-
-/*
- * PL08X private data structures
- * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit,
- * start & end do not - their bus bit info is in cctl. Also note that these
- * are fixed 32-bit quantities.
- */
-struct pl08x_lli {
- u32 src;
- u32 dst;
- u32 lli;
- u32 cctl;
+ bool pl080s;
+ u32 max_transfer_size;
};
/**
@@ -147,6 +145,7 @@ struct pl08x_bus_data {
struct pl08x_phy_chan {
unsigned int id;
void __iomem *base;
+ void __iomem *reg_config;
spinlock_t lock;
struct pl08x_dma_chan *serving;
bool locked;
@@ -176,12 +175,13 @@ struct pl08x_sg {
* @ccfg: config reg values for current txd
* @done: this marks completed descriptors, which should not have their
* mux released.
+ * @cyclic: indicate cyclic transfers
*/
struct pl08x_txd {
struct virt_dma_desc vd;
struct list_head dsg_list;
dma_addr_t llis_bus;
- struct pl08x_lli *llis_va;
+ u32 *llis_va;
/* Default cctl value for LLIs */
u32 cctl;
/*
@@ -190,6 +190,7 @@ struct pl08x_txd {
*/
u32 ccfg;
bool done;
+ bool cyclic;
};
/**
@@ -265,17 +266,29 @@ struct pl08x_driver_data {
struct dma_pool *pool;
u8 lli_buses;
u8 mem_buses;
+ u8 lli_words;
};
/*
* PL08X specific defines
*/
-/* Size (bytes) of each LLI buffer allocated for one transfer */
-# define PL08X_LLI_TSFR_SIZE 0x2000
+/* The order of words in an LLI. */
+#define PL080_LLI_SRC 0
+#define PL080_LLI_DST 1
+#define PL080_LLI_LLI 2
+#define PL080_LLI_CCTL 3
+#define PL080S_LLI_CCTL2 4
+
+/* Total words in an LLI. */
+#define PL080_LLI_WORDS 4
+#define PL080S_LLI_WORDS 8
-/* Maximum times we call dma_pool_alloc on this pool without freeing */
-#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
+/*
+ * Number of LLIs in each LLI buffer allocated for one transfer
+ * (maximum times we call dma_pool_alloc on this pool without freeing)
+ */
+#define MAX_NUM_TSFR_LLIS 512
#define PL08X_ALIGN 8
static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
@@ -336,10 +349,39 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
{
unsigned int val;
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(ch->reg_config);
return val & PL080_CONFIG_ACTIVE;
}
+static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
+ struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
+{
+ if (pl08x->vd->pl080s)
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+ lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL],
+ lli[PL080S_LLI_CCTL2], ccfg);
+ else
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+ lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
+
+ writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
+ writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
+ writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
+ writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+
+ if (pl08x->vd->pl080s)
+ writel_relaxed(lli[PL080S_LLI_CCTL2],
+ phychan->base + PL080S_CH_CONTROL2);
+
+ writel(ccfg, phychan->reg_config);
+}
+
/*
* Set the initial DMA register values i.e. those for the first LLI
* The next LLI pointer and the configuration interrupt bit have
@@ -352,7 +394,6 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
struct pl08x_phy_chan *phychan = plchan->phychan;
struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc);
struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
- struct pl08x_lli *lli;
u32 val;
list_del(&txd->vd.node);
@@ -363,19 +404,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
while (pl08x_phy_channel_busy(phychan))
cpu_relax();
- lli = &txd->llis_va[0];
-
- dev_vdbg(&pl08x->adev->dev,
- "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
- "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
- phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
- txd->ccfg);
-
- writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
- writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
- writel(lli->lli, phychan->base + PL080_CH_LLI);
- writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
- writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
+ pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg);
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
@@ -383,11 +412,11 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
cpu_relax();
/* Do not access config register until channel shows as inactive */
- val = readl(phychan->base + PL080_CH_CONFIG);
+ val = readl(phychan->reg_config);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
- val = readl(phychan->base + PL080_CH_CONFIG);
+ val = readl(phychan->reg_config);
- writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
+ writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
}
/*
@@ -406,9 +435,9 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
int timeout;
/* Set the HALT bit and wait for the FIFO to drain */
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(ch->reg_config);
val |= PL080_CONFIG_HALT;
- writel(val, ch->base + PL080_CH_CONFIG);
+ writel(val, ch->reg_config);
/* Wait for channel inactive */
for (timeout = 1000; timeout; timeout--) {
@@ -425,9 +454,9 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
u32 val;
/* Clear the HALT bit */
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(ch->reg_config);
val &= ~PL080_CONFIG_HALT;
- writel(val, ch->base + PL080_CH_CONFIG);
+ writel(val, ch->reg_config);
}
/*
@@ -439,12 +468,12 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
- u32 val = readl(ch->base + PL080_CH_CONFIG);
+ u32 val = readl(ch->reg_config);
val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
PL080_CONFIG_TC_IRQ_MASK);
- writel(val, ch->base + PL080_CH_CONFIG);
+ writel(val, ch->reg_config);
writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
@@ -455,6 +484,28 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
/* The source width defines the number of bytes */
u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
+ cctl &= PL080_CONTROL_SWIDTH_MASK;
+
+ switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+ case PL080_WIDTH_8BIT:
+ break;
+ case PL080_WIDTH_16BIT:
+ bytes *= 2;
+ break;
+ case PL080_WIDTH_32BIT:
+ bytes *= 4;
+ break;
+ }
+ return bytes;
+}
+
+static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1)
+{
+ /* The source width defines the number of bytes */
+ u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+
+ cctl &= PL080_CONTROL_SWIDTH_MASK;
+
switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
case PL080_WIDTH_8BIT:
break;
@@ -471,47 +522,66 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
/* The channel should be paused when calling this */
static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
{
+ struct pl08x_driver_data *pl08x = plchan->host;
+ const u32 *llis_va, *llis_va_limit;
struct pl08x_phy_chan *ch;
+ dma_addr_t llis_bus;
struct pl08x_txd *txd;
- size_t bytes = 0;
+ u32 llis_max_words;
+ size_t bytes;
+ u32 clli;
ch = plchan->phychan;
txd = plchan->at;
+ if (!ch || !txd)
+ return 0;
+
/*
* Follow the LLIs to get the number of remaining
* bytes in the currently active transaction.
*/
- if (ch && txd) {
- u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
+ clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
- /* First get the remaining bytes in the active transfer */
+ /* First get the remaining bytes in the active transfer */
+ if (pl08x->vd->pl080s)
+ bytes = get_bytes_in_cctl_pl080s(
+ readl(ch->base + PL080_CH_CONTROL),
+ readl(ch->base + PL080S_CH_CONTROL2));
+ else
bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
- if (clli) {
- struct pl08x_lli *llis_va = txd->llis_va;
- dma_addr_t llis_bus = txd->llis_bus;
- int index;
+ if (!clli)
+ return bytes;
- BUG_ON(clli < llis_bus || clli >= llis_bus +
- sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
+ llis_va = txd->llis_va;
+ llis_bus = txd->llis_bus;
- /*
- * Locate the next LLI - as this is an array,
- * it's simple maths to find.
- */
- index = (clli - llis_bus) / sizeof(struct pl08x_lli);
+ llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS;
+ BUG_ON(clli < llis_bus || clli >= llis_bus +
+ sizeof(u32) * llis_max_words);
- for (; index < MAX_NUM_TSFR_LLIS; index++) {
- bytes += get_bytes_in_cctl(llis_va[index].cctl);
+ /*
+ * Locate the next LLI - as this is an array,
+ * it's simple maths to find.
+ */
+ llis_va += (clli - llis_bus) / sizeof(u32);
- /*
- * A LLI pointer of 0 terminates the LLI list
- */
- if (!llis_va[index].lli)
- break;
- }
- }
+ llis_va_limit = llis_va + llis_max_words;
+
+ for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
+ if (pl08x->vd->pl080s)
+ bytes += get_bytes_in_cctl_pl080s(
+ llis_va[PL080_LLI_CCTL],
+ llis_va[PL080S_LLI_CCTL2]);
+ else
+ bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
+
+ /*
+ * A LLI pointer going backward terminates the LLI list
+ */
+ if (llis_va[PL080_LLI_LLI] <= clli)
+ break;
}
return bytes;
@@ -722,6 +792,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
break;
}
+ tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK;
retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
return retbits;
}
@@ -766,20 +837,26 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
/*
* Fills in one LLI for a certain transfer descriptor and advance the counter
*/
-static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
- int num_llis, int len, u32 cctl)
+static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+ struct pl08x_lli_build_data *bd,
+ int num_llis, int len, u32 cctl, u32 cctl2)
{
- struct pl08x_lli *llis_va = bd->txd->llis_va;
+ u32 offset = num_llis * pl08x->lli_words;
+ u32 *llis_va = bd->txd->llis_va + offset;
dma_addr_t llis_bus = bd->txd->llis_bus;
BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
- llis_va[num_llis].cctl = cctl;
- llis_va[num_llis].src = bd->srcbus.addr;
- llis_va[num_llis].dst = bd->dstbus.addr;
- llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
- sizeof(struct pl08x_lli);
- llis_va[num_llis].lli |= bd->lli_bus;
+ /* Advance the offset to next LLI. */
+ offset += pl08x->lli_words;
+
+ llis_va[PL080_LLI_SRC] = bd->srcbus.addr;
+ llis_va[PL080_LLI_DST] = bd->dstbus.addr;
+ llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset);
+ llis_va[PL080_LLI_LLI] |= bd->lli_bus;
+ llis_va[PL080_LLI_CCTL] = cctl;
+ if (pl08x->vd->pl080s)
+ llis_va[PL080S_LLI_CCTL2] = cctl2;
if (cctl & PL080_CONTROL_SRC_INCR)
bd->srcbus.addr += len;
@@ -791,14 +868,53 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
bd->remainder -= len;
}
-static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
- u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
+static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
+ struct pl08x_lli_build_data *bd, u32 *cctl, u32 len,
+ int num_llis, size_t *total_bytes)
{
*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
- pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+ pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len);
(*total_bytes) += len;
}
+#ifdef VERBOSE_DEBUG
+static void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+ const u32 *llis_va, int num_llis)
+{
+ int i;
+
+ if (pl08x->vd->pl080s) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%-3s %-9s %-10s %-10s %-10s %-10s %s\n",
+ "lli", "", "csrc", "cdst", "clli", "cctl", "cctl2");
+ for (i = 0; i < num_llis; i++) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i, llis_va, llis_va[PL080_LLI_SRC],
+ llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+ llis_va[PL080_LLI_CCTL],
+ llis_va[PL080S_LLI_CCTL2]);
+ llis_va += pl08x->lli_words;
+ }
+ } else {
+ dev_vdbg(&pl08x->adev->dev,
+ "%-3s %-9s %-10s %-10s %-10s %s\n",
+ "lli", "", "csrc", "cdst", "clli", "cctl");
+ for (i = 0; i < num_llis; i++) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i, llis_va, llis_va[PL080_LLI_SRC],
+ llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+ llis_va[PL080_LLI_CCTL]);
+ llis_va += pl08x->lli_words;
+ }
+ }
+}
+#else
+static inline void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+ const u32 *llis_va, int num_llis) {}
+#endif
+
/*
* This fills in the table of LLIs for the transfer descriptor
* Note that we assume we never have to change the burst sizes
@@ -812,7 +928,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
int num_llis = 0;
u32 cctl, early_bytes = 0;
size_t max_bytes_per_lli, total_bytes;
- struct pl08x_lli *llis_va;
+ u32 *llis_va, *last_lli;
struct pl08x_sg *dsg;
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
@@ -902,7 +1018,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, 0);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+ pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+ 0, cctl, 0);
break;
}
@@ -924,8 +1041,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
dev_vdbg(&pl08x->adev->dev,
"%s byte width LLIs (remain 0x%08x)\n",
__func__, bd.remainder);
- prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
- &total_bytes);
+ prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
+ num_llis++, &total_bytes);
}
if (bd.remainder) {
@@ -946,7 +1063,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
* MIN(buswidths)
*/
max_bytes_per_lli = bd.srcbus.buswidth *
- PL080_CONTROL_TRANSFER_SIZE_MASK;
+ pl08x->vd->max_transfer_size;
dev_vdbg(&pl08x->adev->dev,
"%s max bytes per lli = %zu\n",
__func__, max_bytes_per_lli);
@@ -981,8 +1098,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, tsize);
- pl08x_fill_lli_for_desc(&bd, num_llis++,
- lli_len, cctl);
+ pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+ lli_len, cctl, tsize);
total_bytes += lli_len;
}
@@ -993,8 +1110,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
dev_vdbg(&pl08x->adev->dev,
"%s align with boundary, send odd bytes (remain %zu)\n",
__func__, bd.remainder);
- prep_byte_width_lli(&bd, &cctl, bd.remainder,
- num_llis++, &total_bytes);
+ prep_byte_width_lli(pl08x, &bd, &cctl,
+ bd.remainder, num_llis++, &total_bytes);
}
}
@@ -1008,33 +1125,25 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
if (num_llis >= MAX_NUM_TSFR_LLIS) {
dev_err(&pl08x->adev->dev,
"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
- __func__, (u32) MAX_NUM_TSFR_LLIS);
+ __func__, MAX_NUM_TSFR_LLIS);
return 0;
}
}
llis_va = txd->llis_va;
- /* The final LLI terminates the LLI. */
- llis_va[num_llis - 1].lli = 0;
- /* The final LLI element shall also fire an interrupt. */
- llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
-
-#ifdef VERBOSE_DEBUG
- {
- int i;
+ last_lli = llis_va + (num_llis - 1) * pl08x->lli_words;
- dev_vdbg(&pl08x->adev->dev,
- "%-3s %-9s %-10s %-10s %-10s %s\n",
- "lli", "", "csrc", "cdst", "clli", "cctl");
- for (i = 0; i < num_llis; i++) {
- dev_vdbg(&pl08x->adev->dev,
- "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
- i, &llis_va[i], llis_va[i].src,
- llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
- );
- }
+ if (txd->cyclic) {
+ /* Link back to the first LLI. */
+ last_lli[PL080_LLI_LLI] = txd->llis_bus | bd.lli_bus;
+ } else {
+ /* The final LLI terminates the LLI. */
+ last_lli[PL080_LLI_LLI] = 0;
+ /* The final LLI element shall also fire an interrupt. */
+ last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
}
-#endif
+
+ pl08x_dump_lli(pl08x, llis_va, num_llis);
return num_llis;
}
@@ -1310,6 +1419,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
if (!plchan->slave)
return -EINVAL;
@@ -1319,6 +1429,13 @@ static int dma_set_runtime_config(struct dma_chan *chan,
config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
+ if (config->device_fc && pl08x->vd->pl080s) {
+ dev_err(&pl08x->adev->dev,
+ "%s: PL080S does not support peripheral flow control\n",
+ __func__);
+ return -EINVAL;
+ }
+
plchan->cfg = *config;
return 0;
@@ -1409,25 +1526,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
}
-static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
- struct dma_chan *chan, struct scatterlist *sgl,
- unsigned int sg_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+static struct pl08x_txd *pl08x_init_txd(
+ struct dma_chan *chan,
+ enum dma_transfer_direction direction,
+ dma_addr_t *slave_addr)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
- struct pl08x_sg *dsg;
- struct scatterlist *sg;
enum dma_slave_buswidth addr_width;
- dma_addr_t slave_addr;
int ret, tmp;
u8 src_buses, dst_buses;
u32 maxburst, cctl;
- dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
- __func__, sg_dma_len(sgl), plchan->name);
-
txd = pl08x_get_txd(plchan);
if (!txd) {
dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
@@ -1441,14 +1552,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
*/
if (direction == DMA_MEM_TO_DEV) {
cctl = PL080_CONTROL_SRC_INCR;
- slave_addr = plchan->cfg.dst_addr;
+ *slave_addr = plchan->cfg.dst_addr;
addr_width = plchan->cfg.dst_addr_width;
maxburst = plchan->cfg.dst_maxburst;
src_buses = pl08x->mem_buses;
dst_buses = plchan->cd->periph_buses;
} else if (direction == DMA_DEV_TO_MEM) {
cctl = PL080_CONTROL_DST_INCR;
- slave_addr = plchan->cfg.src_addr;
+ *slave_addr = plchan->cfg.src_addr;
addr_width = plchan->cfg.src_addr_width;
maxburst = plchan->cfg.src_maxburst;
src_buses = plchan->cd->periph_buses;
@@ -1497,24 +1608,107 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
else
txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT;
+ return txd;
+}
+
+static int pl08x_tx_add_sg(struct pl08x_txd *txd,
+ enum dma_transfer_direction direction,
+ dma_addr_t slave_addr,
+ dma_addr_t buf_addr,
+ unsigned int len)
+{
+ struct pl08x_sg *dsg;
+
+ dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+ if (!dsg)
+ return -ENOMEM;
+
+ list_add_tail(&dsg->node, &txd->dsg_list);
+
+ dsg->len = len;
+ if (direction == DMA_MEM_TO_DEV) {
+ dsg->src_addr = buf_addr;
+ dsg->dst_addr = slave_addr;
+ } else {
+ dsg->src_addr = slave_addr;
+ dsg->dst_addr = buf_addr;
+ }
+
+ return 0;
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ struct scatterlist *sg;
+ int ret, tmp;
+ dma_addr_t slave_addr;
+
+ dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
+ __func__, sg_dma_len(sgl), plchan->name);
+
+ txd = pl08x_init_txd(chan, direction, &slave_addr);
+ if (!txd)
+ return NULL;
+
for_each_sg(sgl, sg, sg_len, tmp) {
- dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
- if (!dsg) {
+ ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+ sg_dma_address(sg),
+ sg_dma_len(sg));
+ if (ret) {
pl08x_release_mux(plchan);
pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
__func__);
return NULL;
}
- list_add_tail(&dsg->node, &txd->dsg_list);
+ }
- dsg->len = sg_dma_len(sg);
- if (direction == DMA_MEM_TO_DEV) {
- dsg->src_addr = sg_dma_address(sg);
- dsg->dst_addr = slave_addr;
- } else {
- dsg->src_addr = slave_addr;
- dsg->dst_addr = sg_dma_address(sg);
+ ret = pl08x_fill_llis_for_desc(plchan->host, txd);
+ if (!ret) {
+ pl08x_release_mux(plchan);
+ pl08x_free_txd(pl08x, txd);
+ return NULL;
+ }
+
+ return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
+ struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ int ret, tmp;
+ dma_addr_t slave_addr;
+
+ dev_dbg(&pl08x->adev->dev,
+ "%s prepare cyclic transaction of %d/%d bytes %s %s\n",
+ __func__, period_len, buf_len,
+ direction == DMA_MEM_TO_DEV ? "to" : "from",
+ plchan->name);
+
+ txd = pl08x_init_txd(chan, direction, &slave_addr);
+ if (!txd)
+ return NULL;
+
+ txd->cyclic = true;
+ txd->cctl |= PL080_CONTROL_TC_IRQ_EN;
+ for (tmp = 0; tmp < buf_len; tmp += period_len) {
+ ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+ buf_addr + tmp, period_len);
+ if (ret) {
+ pl08x_release_mux(plchan);
+ pl08x_free_txd(pl08x, txd);
+ return NULL;
}
}
@@ -1657,7 +1851,9 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
spin_lock(&plchan->vc.lock);
tx = plchan->at;
- if (tx) {
+ if (tx && tx->cyclic) {
+ vchan_cyclic_callback(&tx->vd);
+ } else if (tx) {
plchan->at = NULL;
/*
* This descriptor is done, release its mux
@@ -1851,6 +2047,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
const struct vendor_data *vd = id->data;
+ u32 tsfr_size;
int ret = 0;
int i;
@@ -1878,6 +2075,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
/* Initialize slave engine */
dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
+ dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
pl08x->slave.dev = &adev->dev;
pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
@@ -1885,6 +2083,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
pl08x->slave.device_tx_status = pl08x_dma_tx_status;
pl08x->slave.device_issue_pending = pl08x_issue_pending;
pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
+ pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
pl08x->slave.device_control = pl08x_control;
/* Get the platform data */
@@ -1907,9 +2106,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
pl08x->mem_buses = pl08x->pd->mem_buses;
}
+ if (vd->pl080s)
+ pl08x->lli_words = PL080S_LLI_WORDS;
+ else
+ pl08x->lli_words = PL080_LLI_WORDS;
+ tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32);
+
/* A DMA memory pool for LLIs, align on 1-byte boundary */
pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
- PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
+ tsfr_size, PL08X_ALIGN, 0);
if (!pl08x->pool) {
ret = -ENOMEM;
goto out_no_lli_pool;
@@ -1952,6 +2157,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
ch->id = i;
ch->base = pl08x->base + PL080_Cx_BASE(i);
+ ch->reg_config = ch->base + vd->config_offset;
spin_lock_init(&ch->lock);
/*
@@ -1962,7 +2168,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
if (vd->nomadik) {
u32 val;
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(ch->reg_config);
if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) {
dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i);
ch->locked = true;
@@ -2013,8 +2219,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
amba_set_drvdata(adev, pl08x);
init_pl08x_debugfs(pl08x);
- dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
- amba_part(adev), amba_rev(adev),
+ dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n",
+ amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
return 0;
@@ -2043,22 +2249,41 @@ out_no_pl08x:
/* PL080 has 8 channels and the PL080 have just 2 */
static struct vendor_data vendor_pl080 = {
+ .config_offset = PL080_CH_CONFIG,
.channels = 8,
.dualmaster = true,
+ .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
};
static struct vendor_data vendor_nomadik = {
+ .config_offset = PL080_CH_CONFIG,
.channels = 8,
.dualmaster = true,
.nomadik = true,
+ .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct vendor_data vendor_pl080s = {
+ .config_offset = PL080S_CH_CONFIG,
+ .channels = 8,
+ .pl080s = true,
+ .max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK,
};
static struct vendor_data vendor_pl081 = {
+ .config_offset = PL080_CH_CONFIG,
.channels = 2,
.dualmaster = false,
+ .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
};
static struct amba_id pl08x_ids[] = {
+ /* Samsung PL080S variant */
+ {
+ .id = 0x0a141080,
+ .mask = 0xffffffff,
+ .data = &vendor_pl080s,
+ },
/* PL080 */
{
.id = 0x00041080,
OpenPOWER on IntegriCloud