Merge tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Introduction of device PM QoS flags.

 - ACPI device power management update allowing subsystems other than
   PCI to use it more easily.

 - ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.

 - ACPICA update to version 20121018 from Bob Moore and Lv Zheng.

 - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.

 - Introduction of acpi_handle_<level>() messaging macros and ACPI-based
   CPU hot-remove support from Toshi Kani.

 - ACPI EC updates from Feng Tang.

 - cpufreq updates from Viresh Kumar, Fabio Baltieri and others.

 - cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.

 - Support for using multiple cpuidle drivers at the same time and
   cpuidle cleanups from Daniel Lezcano.

 - devfreq updates from Nishanth Menon and others.

 - cpupower update from Thomas Renninger.

 - Fixes and small cleanups all over the place.

* tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits)
  mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  ACPI: add Haswell LPSS devices to acpi_platform_device_ids list
  ACPI: add documentation about ACPI 5 enumeration
  pnpacpi: fix incorrect TEST_ALPHA() test
  ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h
  ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
  ACPI : do not use Lid and Sleep button for S5 wakeup
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
  spi / ACPI: add ACPI enumeration support
  gpio / ACPI: add ACPI support
  PM / devfreq: remove compiler error with module governors (2)
  cpupower: IvyBridge (0x3a and 0x3e models) support
  cpupower: Provide -c param for cpupower monitor to schedule process on all cores
  cpupower tools: Fix warning and a bug with the cpu package count
  cpupower tools: Fix malloc of cpu_info structure
  cpupower tools: Fix issues with sysfs_topology_read_file
  cpupower tools: Fix minor warnings
  cpupower tools: Update .gitignore for files created in the debug directories
  ...

17 files changed, 1219 insertions, 937 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..a0b3661 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,3 +76,10 @@ config ARM_EXYNOS5250_CPUFREQ
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5250
 	  SoC.
+
+config ARM_SPEAR_CPUFREQ
+	bool "SPEAr CPUFreq support"
+	depends on PLAT_SPEAR
+	default y
+	help
+	  This adds the CPUFreq driver support for SPEAr SOCs.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..1f254ec0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -7,8 +7,8 @@ obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
 obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE)	+= cpufreq_performance.o
 obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE)	+= cpufreq_powersave.o
 obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
-obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
-obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
+obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o cpufreq_governor.o
 
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
@@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)     += omap-cpufreq.o
+obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index e915827..52bf36d 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -174,7 +174,7 @@ static struct cpufreq_driver cpu0_cpufreq_driver = {
 	.attr = cpu0_cpufreq_attr,
 };
 
-static int __devinit cpu0_cpufreq_driver_init(void)
+static int cpu0_cpufreq_driver_init(void)
 {
 	struct device_node *np;
 	int ret;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fb8a527..1f93dbd 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -127,7 +129,7 @@ static int __init init_cpufreq_transition_notifier_list(void)
 pure_initcall(init_cpufreq_transition_notifier_list);
 
 static int off __read_mostly;
-int cpufreq_disabled(void)
+static int cpufreq_disabled(void)
 {
 	return off;
 }
@@ -402,7 +404,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 static ssize_t store_##file_name					\
 (struct cpufreq_policy *policy, const char *buf, size_t count)		\
 {									\
-	unsigned int ret = -EINVAL;					\
+	unsigned int ret;						\
 	struct cpufreq_policy new_policy;				\
 									\
 	ret = cpufreq_get_policy(&new_policy, policy->cpu);		\
@@ -445,7 +447,7 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
 	else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
 		return sprintf(buf, "performance\n");
 	else if (policy->governor)
-		return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
+		return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n",
 				policy->governor->name);
 	return -EINVAL;
 }
@@ -457,7 +459,7 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
 static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 					const char *buf, size_t count)
 {
-	unsigned int ret = -EINVAL;
+	unsigned int ret;
 	char	str_governor[16];
 	struct cpufreq_policy new_policy;
 
@@ -491,7 +493,7 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
  */
 static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
 {
-	return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
+	return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name);
 }
 
 /**
@@ -512,7 +514,7 @@ static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy,
 		if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
 		    - (CPUFREQ_NAME_LEN + 2)))
 			goto out;
-		i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
+		i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name);
 	}
 out:
 	i += sprintf(&buf[i], "\n");
@@ -581,7 +583,7 @@ static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
 }
 
 /**
- * show_scaling_driver - show the current cpufreq HW/BIOS limitation
+ * show_bios_limit - show the current cpufreq HW/BIOS limitation
  */
 static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
 {
@@ -1468,12 +1470,23 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			    unsigned int relation)
 {
 	int retval = -EINVAL;
+	unsigned int old_target_freq = target_freq;
 
 	if (cpufreq_disabled())
 		return -ENODEV;
 
-	pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
-		target_freq, relation);
+	/* Make sure that target_freq is within supported range */
+	if (target_freq > policy->max)
+		target_freq = policy->max;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+
+	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
+			policy->cpu, target_freq, relation, old_target_freq);
+
+	if (target_freq == policy->cur)
+		return 0;
+
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
 		retval = cpufreq_driver->target(policy, target_freq, relation);
 
@@ -1509,12 +1522,14 @@ int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu)
 {
 	int ret = 0;
 
+	if (!(cpu_online(cpu) && cpufreq_driver->getavg))
+		return 0;
+
 	policy = cpufreq_cpu_get(policy->cpu);
 	if (!policy)
 		return -EINVAL;
 
-	if (cpu_online(cpu) && cpufreq_driver->getavg)
-		ret = cpufreq_driver->getavg(policy, cpu);
+	ret = cpufreq_driver->getavg(policy, cpu);
 
 	cpufreq_cpu_put(policy);
 	return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index a152af7..64ef737 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -11,83 +11,30 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/hrtimer.h>
-#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
 
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
 
+/* Conservative governor macors */
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_FREQUENCY_DOWN_THRESHOLD		(20)
-
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO			(2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER			(1000)
-#define MIN_LATENCY_MULTIPLIER			(100)
 #define DEF_SAMPLING_DOWN_FACTOR		(1)
 #define MAX_SAMPLING_DOWN_FACTOR		(10)
-#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-
-struct cpu_dbs_info_s {
-	cputime64_t prev_cpu_idle;
-	cputime64_t prev_cpu_wall;
-	cputime64_t prev_cpu_nice;
-	struct cpufreq_policy *cur_policy;
-	struct delayed_work work;
-	unsigned int down_skip;
-	unsigned int requested_freq;
-	int cpu;
-	unsigned int enable:1;
-	/*
-	 * percpu mutex that serializes governor limit change with
-	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
-	 * when user is changing the governor or limits.
-	 */
-	struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, cs_cpu_dbs_info);
 
-static unsigned int dbs_enable;	/* number of CPUs using this policy */
+static struct dbs_data cs_dbs_data;
+static DEFINE_PER_CPU(struct cs_cpu_dbs_info_s, cs_cpu_dbs_info);
 
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
-	unsigned int sampling_rate;
-	unsigned int sampling_down_factor;
-	unsigned int up_threshold;
-	unsigned int down_threshold;
-	unsigned int ignore_nice;
-	unsigned int freq_step;
-} dbs_tuners_ins = {
+static struct cs_dbs_tuners cs_tuners = {
 	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
 	.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
 	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
@@ -95,95 +42,121 @@ static struct dbs_tuners {
 	.freq_step = 5,
 };
 
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate *
+ * sampling_down_factor, we check, if current idle time is more than 80%, then
+ * we try to decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of maximum frequency
+ */
+static void cs_check_cpu(int cpu, unsigned int load)
 {
-	u64 idle_time;
-	u64 cur_wall_time;
-	u64 busy_time;
+	struct cs_cpu_dbs_info_s *dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
+	struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+	unsigned int freq_target;
+
+	/*
+	 * break out if we 'cannot' reduce the speed as the user might
+	 * want freq_step to be zero
+	 */
+	if (cs_tuners.freq_step == 0)
+		return;
 
-	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+	/* Check for frequency increase */
+	if (load > cs_tuners.up_threshold) {
+		dbs_info->down_skip = 0;
 
-	busy_time  = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+		/* if we are already at full speed then break out early */
+		if (dbs_info->requested_freq == policy->max)
+			return;
 
-	idle_time = cur_wall_time - busy_time;
-	if (wall)
-		*wall = jiffies_to_usecs(cur_wall_time);
+		freq_target = (cs_tuners.freq_step * policy->max) / 100;
 
-	return jiffies_to_usecs(idle_time);
+		/* max freq cannot be less than 100. But who knows.... */
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
+
+		dbs_info->requested_freq += freq_target;
+		if (dbs_info->requested_freq > policy->max)
+			dbs_info->requested_freq = policy->max;
+
+		__cpufreq_driver_target(policy, dbs_info->requested_freq,
+			CPUFREQ_RELATION_H);
+		return;
+	}
+
+	/*
+	 * The optimal frequency is the frequency that is the lowest that can
+	 * support the current CPU usage without triggering the up policy. To be
+	 * safe, we focus 10 points under the threshold.
+	 */
+	if (load < (cs_tuners.down_threshold - 10)) {
+		freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+		dbs_info->requested_freq -= freq_target;
+		if (dbs_info->requested_freq < policy->min)
+			dbs_info->requested_freq = policy->min;
+
+		/*
+		 * if we cannot reduce the frequency anymore, break out early
+		 */
+		if (policy->cur == policy->min)
+			return;
+
+		__cpufreq_driver_target(policy, dbs_info->requested_freq,
+				CPUFREQ_RELATION_H);
+		return;
+	}
 }
 
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+static void cs_dbs_timer(struct work_struct *work)
 {
-	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+	struct cs_cpu_dbs_info_s *dbs_info = container_of(work,
+			struct cs_cpu_dbs_info_s, cdbs.work.work);
+	unsigned int cpu = dbs_info->cdbs.cpu;
+	int delay = delay_for_sampling_rate(cs_tuners.sampling_rate);
 
-	if (idle_time == -1ULL)
-		return get_cpu_idle_time_jiffy(cpu, wall);
-	else
-		idle_time += get_cpu_iowait_time_us(cpu, wall);
+	mutex_lock(&dbs_info->cdbs.timer_mutex);
 
-	return idle_time;
+	dbs_check_cpu(&cs_dbs_data, cpu);
+
+	schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+	mutex_unlock(&dbs_info->cdbs.timer_mutex);
 }
 
-/* keep track of frequency transitions */
-static int
-dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-		     void *data)
+static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+		void *data)
 {
 	struct cpufreq_freqs *freq = data;
-	struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cs_cpu_dbs_info,
-							freq->cpu);
-
+	struct cs_cpu_dbs_info_s *dbs_info =
+					&per_cpu(cs_cpu_dbs_info, freq->cpu);
 	struct cpufreq_policy *policy;
 
-	if (!this_dbs_info->enable)
+	if (!dbs_info->enable)
 		return 0;
 
-	policy = this_dbs_info->cur_policy;
+	policy = dbs_info->cdbs.cur_policy;
 
 	/*
-	 * we only care if our internally tracked freq moves outside
-	 * the 'valid' ranges of freqency available to us otherwise
-	 * we do not change it
+	 * we only care if our internally tracked freq moves outside the 'valid'
+	 * ranges of freqency available to us otherwise we do not change it
 	*/
-	if (this_dbs_info->requested_freq > policy->max
-			|| this_dbs_info->requested_freq < policy->min)
-		this_dbs_info->requested_freq = freq->new;
+	if (dbs_info->requested_freq > policy->max
+			|| dbs_info->requested_freq < policy->min)
+		dbs_info->requested_freq = freq->new;
 
 	return 0;
 }
 
-static struct notifier_block dbs_cpufreq_notifier_block = {
-	.notifier_call = dbs_cpufreq_notifier
-};
-
 /************************** sysfs interface ************************/
 static ssize_t show_sampling_rate_min(struct kobject *kobj,
 				      struct attribute *attr, char *buf)
 {
-	return sprintf(buf, "%u\n", min_sampling_rate);
+	return sprintf(buf, "%u\n", cs_dbs_data.min_sampling_rate);
 }
 
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_conservative Governor Tunables */
-#define show_one(file_name, object)					\
-static ssize_t show_##file_name						\
-(struct kobject *kobj, struct attribute *attr, char *buf)		\
-{									\
-	return sprintf(buf, "%u\n", dbs_tuners_ins.object);		\
-}
-show_one(sampling_rate, sampling_rate);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
-show_one(ignore_nice_load, ignore_nice);
-show_one(freq_step, freq_step);
-
 static ssize_t store_sampling_down_factor(struct kobject *a,
 					  struct attribute *b,
 					  const char *buf, size_t count)
@@ -195,7 +168,7 @@ static ssize_t store_sampling_down_factor(struct kobject *a,
 	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
 		return -EINVAL;
 
-	dbs_tuners_ins.sampling_down_factor = input;
+	cs_tuners.sampling_down_factor = input;
 	return count;
 }
 
@@ -209,7 +182,7 @@ static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
 	if (ret != 1)
 		return -EINVAL;
 
-	dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+	cs_tuners.sampling_rate = max(input, cs_dbs_data.min_sampling_rate);
 	return count;
 }
 
@@ -220,11 +193,10 @@ static ssize_t store_up_threshold(struct kobject *a, struct attribute *b,
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	if (ret != 1 || input > 100 ||
-			input <= dbs_tuners_ins.down_threshold)
+	if (ret != 1 || input > 100 || input <= cs_tuners.down_threshold)
 		return -EINVAL;
 
-	dbs_tuners_ins.up_threshold = input;
+	cs_tuners.up_threshold = input;
 	return count;
 }
 
@@ -237,21 +209,19 @@ static ssize_t store_down_threshold(struct kobject *a, struct attribute *b,
 
 	/* cannot be lower than 11 otherwise freq will not fall */
 	if (ret != 1 || input < 11 || input > 100 ||
-			input >= dbs_tuners_ins.up_threshold)
+			input >= cs_tuners.up_threshold)
 		return -EINVAL;
 
-	dbs_tuners_ins.down_threshold = input;
+	cs_tuners.down_threshold = input;
 	return count;
 }
 
 static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
 				      const char *buf, size_t count)
 {
-	unsigned int input;
+	unsigned int input, j;
 	int ret;
 
-	unsigned int j;
-
 	ret = sscanf(buf, "%u", &input);
 	if (ret != 1)
 		return -EINVAL;
@@ -259,19 +229,20 @@ static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
 	if (input > 1)
 		input = 1;
 
-	if (input == dbs_tuners_ins.ignore_nice) /* nothing to do */
+	if (input == cs_tuners.ignore_nice) /* nothing to do */
 		return count;
 
-	dbs_tuners_ins.ignore_nice = input;
+	cs_tuners.ignore_nice = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
+		struct cs_cpu_dbs_info_s *dbs_info;
 		dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-		dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&dbs_info->prev_cpu_wall);
-		if (dbs_tuners_ins.ignore_nice)
-			dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+						&dbs_info->cdbs.prev_cpu_wall);
+		if (cs_tuners.ignore_nice)
+			dbs_info->cdbs.prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 	}
 	return count;
 }
@@ -289,18 +260,28 @@ static ssize_t store_freq_step(struct kobject *a, struct attribute *b,
 	if (input > 100)
 		input = 100;
 
-	/* no need to test here if freq_step is zero as the user might actually
-	 * want this, they would be crazy though :) */
-	dbs_tuners_ins.freq_step = input;
+	/*
+	 * no need to test here if freq_step is zero as the user might actually
+	 * want this, they would be crazy though :)
+	 */
+	cs_tuners.freq_step = input;
 	return count;
 }
 
+show_one(cs, sampling_rate, sampling_rate);
+show_one(cs, sampling_down_factor, sampling_down_factor);
+show_one(cs, up_threshold, up_threshold);
+show_one(cs, down_threshold, down_threshold);
+show_one(cs, ignore_nice_load, ignore_nice);
+show_one(cs, freq_step, freq_step);
+
 define_one_global_rw(sampling_rate);
 define_one_global_rw(sampling_down_factor);
 define_one_global_rw(up_threshold);
 define_one_global_rw(down_threshold);
 define_one_global_rw(ignore_nice_load);
 define_one_global_rw(freq_step);
+define_one_global_ro(sampling_rate_min);
 
 static struct attribute *dbs_attributes[] = {
 	&sampling_rate_min.attr,
@@ -313,283 +294,38 @@ static struct attribute *dbs_attributes[] = {
 	NULL
 };
 
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group cs_attr_group = {
 	.attrs = dbs_attributes,
 	.name = "conservative",
 };
 
 /************************** sysfs end ************************/
 
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
-	unsigned int load = 0;
-	unsigned int max_load = 0;
-	unsigned int freq_target;
-
-	struct cpufreq_policy *policy;
-	unsigned int j;
-
-	policy = this_dbs_info->cur_policy;
-
-	/*
-	 * Every sampling_rate, we check, if current idle time is less
-	 * than 20% (default), then we try to increase frequency
-	 * Every sampling_rate*sampling_down_factor, we check, if current
-	 * idle time is more than 80%, then we try to decrease frequency
-	 *
-	 * Any frequency increase takes it to the maximum frequency.
-	 * Frequency reduction happens at minimum steps of
-	 * 5% (default) of maximum frequency
-	 */
-
-	/* Get Absolute Load */
-	for_each_cpu(j, policy->cpus) {
-		struct cpu_dbs_info_s *j_dbs_info;
-		cputime64_t cur_wall_time, cur_idle_time;
-		unsigned int idle_time, wall_time;
-
-		j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-
-		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-
-		wall_time = (unsigned int)
-			(cur_wall_time - j_dbs_info->prev_cpu_wall);
-		j_dbs_info->prev_cpu_wall = cur_wall_time;
-
-		idle_time = (unsigned int)
-			(cur_idle_time - j_dbs_info->prev_cpu_idle);
-		j_dbs_info->prev_cpu_idle = cur_idle_time;
-
-		if (dbs_tuners_ins.ignore_nice) {
-			u64 cur_nice;
-			unsigned long cur_nice_jiffies;
-
-			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
-					 j_dbs_info->prev_cpu_nice;
-			/*
-			 * Assumption: nice time between sampling periods will
-			 * be less than 2^32 jiffies for 32 bit sys
-			 */
-			cur_nice_jiffies = (unsigned long)
-					cputime64_to_jiffies64(cur_nice);
-
-			j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-			idle_time += jiffies_to_usecs(cur_nice_jiffies);
-		}
+define_get_cpu_dbs_routines(cs_cpu_dbs_info);
 
-		if (unlikely(!wall_time || wall_time < idle_time))
-			continue;
-
-		load = 100 * (wall_time - idle_time) / wall_time;
-
-		if (load > max_load)
-			max_load = load;
-	}
-
-	/*
-	 * break out if we 'cannot' reduce the speed as the user might
-	 * want freq_step to be zero
-	 */
-	if (dbs_tuners_ins.freq_step == 0)
-		return;
-
-	/* Check for frequency increase */
-	if (max_load > dbs_tuners_ins.up_threshold) {
-		this_dbs_info->down_skip = 0;
-
-		/* if we are already at full speed then break out early */
-		if (this_dbs_info->requested_freq == policy->max)
-			return;
-
-		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
-		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_target == 0))
-			freq_target = 5;
-
-		this_dbs_info->requested_freq += freq_target;
-		if (this_dbs_info->requested_freq > policy->max)
-			this_dbs_info->requested_freq = policy->max;
-
-		__cpufreq_driver_target(policy, this_dbs_info->requested_freq,
-			CPUFREQ_RELATION_H);
-		return;
-	}
-
-	/*
-	 * The optimal frequency is the frequency that is the lowest that
-	 * can support the current CPU usage without triggering the up
-	 * policy. To be safe, we focus 10 points under the threshold.
-	 */
-	if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
-		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
-		this_dbs_info->requested_freq -= freq_target;
-		if (this_dbs_info->requested_freq < policy->min)
-			this_dbs_info->requested_freq = policy->min;
-
-		/*
-		 * if we cannot reduce the frequency anymore, break out early
-		 */
-		if (policy->cur == policy->min)
-			return;
-
-		__cpufreq_driver_target(policy, this_dbs_info->requested_freq,
-				CPUFREQ_RELATION_H);
-		return;
-	}
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
-	struct cpu_dbs_info_s *dbs_info =
-		container_of(work, struct cpu_dbs_info_s, work.work);
-	unsigned int cpu = dbs_info->cpu;
-
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
-	delay -= jiffies % delay;
-
-	mutex_lock(&dbs_info->timer_mutex);
-
-	dbs_check_cpu(dbs_info);
-
-	schedule_delayed_work_on(cpu, &dbs_info->work, delay);
-	mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-	delay -= jiffies % delay;
+static struct notifier_block cs_cpufreq_notifier_block = {
+	.notifier_call = dbs_cpufreq_notifier,
+};
 
-	dbs_info->enable = 1;
-	INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
-	schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
+static struct cs_ops cs_ops = {
+	.notifier_block = &cs_cpufreq_notifier_block,
+};
 
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
-	dbs_info->enable = 0;
-	cancel_delayed_work_sync(&dbs_info->work);
-}
+static struct dbs_data cs_dbs_data = {
+	.governor = GOV_CONSERVATIVE,
+	.attr_group = &cs_attr_group,
+	.tuners = &cs_tuners,
+	.get_cpu_cdbs = get_cpu_cdbs,
+	.get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+	.gov_dbs_timer = cs_dbs_timer,
+	.gov_check_cpu = cs_check_cpu,
+	.gov_ops = &cs_ops,
+};
 
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy,
 				   unsigned int event)
 {
-	unsigned int cpu = policy->cpu;
-	struct cpu_dbs_info_s *this_dbs_info;
-	unsigned int j;
-	int rc;
-
-	this_dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
-
-	switch (event) {
-	case CPUFREQ_GOV_START:
-		if ((!cpu_online(cpu)) || (!policy->cur))
-			return -EINVAL;
-
-		mutex_lock(&dbs_mutex);
-
-		for_each_cpu(j, policy->cpus) {
-			struct cpu_dbs_info_s *j_dbs_info;
-			j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-			j_dbs_info->cur_policy = policy;
-
-			j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&j_dbs_info->prev_cpu_wall);
-			if (dbs_tuners_ins.ignore_nice)
-				j_dbs_info->prev_cpu_nice =
-						kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-		}
-		this_dbs_info->cpu = cpu;
-		this_dbs_info->down_skip = 0;
-		this_dbs_info->requested_freq = policy->cur;
-
-		mutex_init(&this_dbs_info->timer_mutex);
-		dbs_enable++;
-		/*
-		 * Start the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 1) {
-			unsigned int latency;
-			/* policy latency is in nS. Convert it to uS first */
-			latency = policy->cpuinfo.transition_latency / 1000;
-			if (latency == 0)
-				latency = 1;
-
-			rc = sysfs_create_group(cpufreq_global_kobject,
-						&dbs_attr_group);
-			if (rc) {
-				mutex_unlock(&dbs_mutex);
-				return rc;
-			}
-
-			/*
-			 * conservative does not implement micro like ondemand
-			 * governor, thus we are bound to jiffes/HZ
-			 */
-			min_sampling_rate =
-				MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
-			/* Bring kernel and HW constraints together */
-			min_sampling_rate = max(min_sampling_rate,
-					MIN_LATENCY_MULTIPLIER * latency);
-			dbs_tuners_ins.sampling_rate =
-				max(min_sampling_rate,
-				    latency * LATENCY_MULTIPLIER);
-
-			cpufreq_register_notifier(
-					&dbs_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-		}
-		mutex_unlock(&dbs_mutex);
-
-		dbs_timer_init(this_dbs_info);
-
-		break;
-
-	case CPUFREQ_GOV_STOP:
-		dbs_timer_exit(this_dbs_info);
-
-		mutex_lock(&dbs_mutex);
-		dbs_enable--;
-		mutex_destroy(&this_dbs_info->timer_mutex);
-
-		/*
-		 * Stop the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 0)
-			cpufreq_unregister_notifier(
-					&dbs_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-
-		mutex_unlock(&dbs_mutex);
-		if (!dbs_enable)
-			sysfs_remove_group(cpufreq_global_kobject,
-					   &dbs_attr_group);
-
-		break;
-
-	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&this_dbs_info->timer_mutex);
-		if (policy->max < this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(
-					this_dbs_info->cur_policy,
-					policy->max, CPUFREQ_RELATION_H);
-		else if (policy->min > this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(
-					this_dbs_info->cur_policy,
-					policy->min, CPUFREQ_RELATION_L);
-		dbs_check_cpu(this_dbs_info);
-		mutex_unlock(&this_dbs_info->timer_mutex);
-
-		break;
-	}
-	return 0;
+	return cpufreq_governor_dbs(&cs_dbs_data, policy, event);
 }
 
 #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
@@ -597,13 +333,14 @@ static
 #endif
 struct cpufreq_governor cpufreq_gov_conservative = {
 	.name			= "conservative",
-	.governor		= cpufreq_governor_dbs,
+	.governor		= cs_cpufreq_governor_dbs,
 	.max_transition_latency	= TRANSITION_LATENCY_LIMIT,
 	.owner			= THIS_MODULE,
 };
 
 static int __init cpufreq_gov_dbs_init(void)
 {
+	mutex_init(&cs_dbs_data.mutex);
 	return cpufreq_register_governor(&cpufreq_gov_conservative);
 }
 
@@ -612,7 +349,6 @@ static void __exit cpufreq_gov_dbs_exit(void)
 	cpufreq_unregister_governor(&cpufreq_gov_conservative);
 }
 
-
 MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>");
 MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
 		"Low Latency Frequency Transition capable processors "
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
new file mode 100644
index 0000000..6c5f1d3
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -0,0 +1,318 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.c
+ *
+ * CPUFREQ governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/cputime.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/kernel_stat.h>
+#include <linux/mutex.h>
+#include <linux/tick.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "cpufreq_governor.h"
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time;
+	u64 cur_wall_time;
+	u64 busy_time;
+
+	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+
+	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+	idle_time = cur_wall_time - busy_time;
+	if (wall)
+		*wall = cputime_to_usecs(cur_wall_time);
+
+	return cputime_to_usecs(idle_time);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+
+	if (idle_time == -1ULL)
+		return get_cpu_idle_time_jiffy(cpu, wall);
+	else
+		idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+	return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
+
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
+{
+	struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	struct cpufreq_policy *policy;
+	unsigned int max_load = 0;
+	unsigned int ignore_nice;
+	unsigned int j;
+
+	if (dbs_data->governor == GOV_ONDEMAND)
+		ignore_nice = od_tuners->ignore_nice;
+	else
+		ignore_nice = cs_tuners->ignore_nice;
+
+	policy = cdbs->cur_policy;
+
+	/* Get Absolute Load (in terms of freq for ondemand gov) */
+	for_each_cpu(j, policy->cpus) {
+		struct cpu_dbs_common_info *j_cdbs;
+		u64 cur_wall_time, cur_idle_time, cur_iowait_time;
+		unsigned int idle_time, wall_time, iowait_time;
+		unsigned int load;
+
+		j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
+
+		wall_time = (unsigned int)
+			(cur_wall_time - j_cdbs->prev_cpu_wall);
+		j_cdbs->prev_cpu_wall = cur_wall_time;
+
+		idle_time = (unsigned int)
+			(cur_idle_time - j_cdbs->prev_cpu_idle);
+		j_cdbs->prev_cpu_idle = cur_idle_time;
+
+		if (ignore_nice) {
+			u64 cur_nice;
+			unsigned long cur_nice_jiffies;
+
+			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
+					 cdbs->prev_cpu_nice;
+			/*
+			 * Assumption: nice time between sampling periods will
+			 * be less than 2^32 jiffies for 32 bit sys
+			 */
+			cur_nice_jiffies = (unsigned long)
+					cputime64_to_jiffies64(cur_nice);
+
+			cdbs->prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			idle_time += jiffies_to_usecs(cur_nice_jiffies);
+		}
+
+		if (dbs_data->governor == GOV_ONDEMAND) {
+			struct od_cpu_dbs_info_s *od_j_dbs_info =
+				dbs_data->get_cpu_dbs_info_s(cpu);
+
+			cur_iowait_time = get_cpu_iowait_time_us(j,
+					&cur_wall_time);
+			if (cur_iowait_time == -1ULL)
+				cur_iowait_time = 0;
+
+			iowait_time = (unsigned int) (cur_iowait_time -
+					od_j_dbs_info->prev_cpu_iowait);
+			od_j_dbs_info->prev_cpu_iowait = cur_iowait_time;
+
+			/*
+			 * For the purpose of ondemand, waiting for disk IO is
+			 * an indication that you're performance critical, and
+			 * not that the system is actually idle. So subtract the
+			 * iowait time from the cpu idle time.
+			 */
+			if (od_tuners->io_is_busy && idle_time >= iowait_time)
+				idle_time -= iowait_time;
+		}
+
+		if (unlikely(!wall_time || wall_time < idle_time))
+			continue;
+
+		load = 100 * (wall_time - idle_time) / wall_time;
+
+		if (dbs_data->governor == GOV_ONDEMAND) {
+			int freq_avg = __cpufreq_driver_getavg(policy, j);
+			if (freq_avg <= 0)
+				freq_avg = policy->cur;
+
+			load *= freq_avg;
+		}
+
+		if (load > max_load)
+			max_load = load;
+	}
+
+	dbs_data->gov_check_cpu(cpu, max_load);
+}
+EXPORT_SYMBOL_GPL(dbs_check_cpu);
+
+static inline void dbs_timer_init(struct dbs_data *dbs_data,
+		struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+{
+	int delay = delay_for_sampling_rate(sampling_rate);
+
+	INIT_DEFERRABLE_WORK(&cdbs->work, dbs_data->gov_dbs_timer);
+	schedule_delayed_work_on(cdbs->cpu, &cdbs->work, delay);
+}
+
+static inline void dbs_timer_exit(struct cpu_dbs_common_info *cdbs)
+{
+	cancel_delayed_work_sync(&cdbs->work);
+}
+
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+		struct cpufreq_policy *policy, unsigned int event)
+{
+	struct od_cpu_dbs_info_s *od_dbs_info = NULL;
+	struct cs_cpu_dbs_info_s *cs_dbs_info = NULL;
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	struct cpu_dbs_common_info *cpu_cdbs;
+	unsigned int *sampling_rate, latency, ignore_nice, j, cpu = policy->cpu;
+	int rc;
+
+	cpu_cdbs = dbs_data->get_cpu_cdbs(cpu);
+
+	if (dbs_data->governor == GOV_CONSERVATIVE) {
+		cs_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+		sampling_rate = &cs_tuners->sampling_rate;
+		ignore_nice = cs_tuners->ignore_nice;
+	} else {
+		od_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+		sampling_rate = &od_tuners->sampling_rate;
+		ignore_nice = od_tuners->ignore_nice;
+	}
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if ((!cpu_online(cpu)) || (!policy->cur))
+			return -EINVAL;
+
+		mutex_lock(&dbs_data->mutex);
+
+		dbs_data->enable++;
+		cpu_cdbs->cpu = cpu;
+		for_each_cpu(j, policy->cpus) {
+			struct cpu_dbs_common_info *j_cdbs;
+			j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+			j_cdbs->cur_policy = policy;
+			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j,
+					&j_cdbs->prev_cpu_wall);
+			if (ignore_nice)
+				j_cdbs->prev_cpu_nice =
+					kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		}
+
+		/*
+		 * Start the timerschedule work, when this governor is used for
+		 * first time
+		 */
+		if (dbs_data->enable != 1)
+			goto second_time;
+
+		rc = sysfs_create_group(cpufreq_global_kobject,
+				dbs_data->attr_group);
+		if (rc) {
+			mutex_unlock(&dbs_data->mutex);
+			return rc;
+		}
+
+		/* policy latency is in nS. Convert it to uS first */
+		latency = policy->cpuinfo.transition_latency / 1000;
+		if (latency == 0)
+			latency = 1;
+
+		/*
+		 * conservative does not implement micro like ondemand
+		 * governor, thus we are bound to jiffes/HZ
+		 */
+		if (dbs_data->governor == GOV_CONSERVATIVE) {
+			struct cs_ops *ops = dbs_data->gov_ops;
+
+			cpufreq_register_notifier(ops->notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+
+			dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+				jiffies_to_usecs(10);
+		} else {
+			struct od_ops *ops = dbs_data->gov_ops;
+
+			od_tuners->io_is_busy = ops->io_busy();
+		}
+
+		/* Bring kernel and HW constraints together */
+		dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
+				MIN_LATENCY_MULTIPLIER * latency);
+		*sampling_rate = max(dbs_data->min_sampling_rate, latency *
+				LATENCY_MULTIPLIER);
+
+second_time:
+		if (dbs_data->governor == GOV_CONSERVATIVE) {
+			cs_dbs_info->down_skip = 0;
+			cs_dbs_info->enable = 1;
+			cs_dbs_info->requested_freq = policy->cur;
+		} else {
+			struct od_ops *ops = dbs_data->gov_ops;
+			od_dbs_info->rate_mult = 1;
+			od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
+			ops->powersave_bias_init_cpu(cpu);
+		}
+		mutex_unlock(&dbs_data->mutex);
+
+		mutex_init(&cpu_cdbs->timer_mutex);
+		dbs_timer_init(dbs_data, cpu_cdbs, *sampling_rate);
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		if (dbs_data->governor == GOV_CONSERVATIVE)
+			cs_dbs_info->enable = 0;
+
+		dbs_timer_exit(cpu_cdbs);
+
+		mutex_lock(&dbs_data->mutex);
+		mutex_destroy(&cpu_cdbs->timer_mutex);
+		dbs_data->enable--;
+		if (!dbs_data->enable) {
+			struct cs_ops *ops = dbs_data->gov_ops;
+
+			sysfs_remove_group(cpufreq_global_kobject,
+					dbs_data->attr_group);
+			if (dbs_data->governor == GOV_CONSERVATIVE)
+				cpufreq_unregister_notifier(ops->notifier_block,
+						CPUFREQ_TRANSITION_NOTIFIER);
+		}
+		mutex_unlock(&dbs_data->mutex);
+
+		break;
+
+	case CPUFREQ_GOV_LIMITS:
+		mutex_lock(&cpu_cdbs->timer_mutex);
+		if (policy->max < cpu_cdbs->cur_policy->cur)
+			__cpufreq_driver_target(cpu_cdbs->cur_policy,
+					policy->max, CPUFREQ_RELATION_H);
+		else if (policy->min > cpu_cdbs->cur_policy->cur)
+			__cpufreq_driver_target(cpu_cdbs->cur_policy,
+					policy->min, CPUFREQ_RELATION_L);
+		dbs_check_cpu(dbs_data, cpu);
+		mutex_unlock(&cpu_cdbs->timer_mutex);
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_governor_dbs);
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
new file mode 100644
index 0000000..f661654
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -0,0 +1,176 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.h
+ *
+ * Header file for CPUFreq governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _CPUFREQ_GOVERNER_H
+#define _CPUFREQ_GOVERNER_H
+
+#include <linux/cpufreq.h>
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * governor will work on any processor with transition latency <= 10mS, using
+ * appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work. All times here are in uS.
+ */
+#define MIN_SAMPLING_RATE_RATIO			(2)
+#define LATENCY_MULTIPLIER			(1000)
+#define MIN_LATENCY_MULTIPLIER			(100)
+#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
+
+/* Ondemand Sampling types */
+enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
+
+/* Macro creating sysfs show routines */
+#define show_one(_gov, file_name, object)				\
+static ssize_t show_##file_name						\
+(struct kobject *kobj, struct attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%u\n", _gov##_tuners.object);		\
+}
+
+#define define_get_cpu_dbs_routines(_dbs_info)				\
+static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu)		\
+{									\
+	return &per_cpu(_dbs_info, cpu).cdbs;				\
+}									\
+									\
+static void *get_cpu_dbs_info_s(int cpu)				\
+{									\
+	return &per_cpu(_dbs_info, cpu);				\
+}
+
+/*
+ * Abbreviations:
+ * dbs: used as a shortform for demand based switching It helps to keep variable
+ *	names smaller, simpler
+ * cdbs: common dbs
+ * on_*: On-demand governor
+ * cs_*: Conservative governor
+ */
+
+/* Per cpu structures */
+struct cpu_dbs_common_info {
+	int cpu;
+	u64 prev_cpu_idle;
+	u64 prev_cpu_wall;
+	u64 prev_cpu_nice;
+	struct cpufreq_policy *cur_policy;
+	struct delayed_work work;
+	/*
+	 * percpu mutex that serializes governor limit change with gov_dbs_timer
+	 * invocation. We do not want gov_dbs_timer to run when user is changing
+	 * the governor or limits.
+	 */
+	struct mutex timer_mutex;
+};
+
+struct od_cpu_dbs_info_s {
+	struct cpu_dbs_common_info cdbs;
+	u64 prev_cpu_iowait;
+	struct cpufreq_frequency_table *freq_table;
+	unsigned int freq_lo;
+	unsigned int freq_lo_jiffies;
+	unsigned int freq_hi_jiffies;
+	unsigned int rate_mult;
+	unsigned int sample_type:1;
+};
+
+struct cs_cpu_dbs_info_s {
+	struct cpu_dbs_common_info cdbs;
+	unsigned int down_skip;
+	unsigned int requested_freq;
+	unsigned int enable:1;
+};
+
+/* Governers sysfs tunables */
+struct od_dbs_tuners {
+	unsigned int ignore_nice;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int down_differential;
+	unsigned int powersave_bias;
+	unsigned int io_is_busy;
+};
+
+struct cs_dbs_tuners {
+	unsigned int ignore_nice;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int down_threshold;
+	unsigned int freq_step;
+};
+
+/* Per Governer data */
+struct dbs_data {
+	/* Common across governors */
+	#define GOV_ONDEMAND		0
+	#define GOV_CONSERVATIVE	1
+	int governor;
+	unsigned int min_sampling_rate;
+	unsigned int enable; /* number of CPUs using this policy */
+	struct attribute_group *attr_group;
+	void *tuners;
+
+	/* dbs_mutex protects dbs_enable in governor start/stop */
+	struct mutex mutex;
+
+	struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu);
+	void *(*get_cpu_dbs_info_s)(int cpu);
+	void (*gov_dbs_timer)(struct work_struct *work);
+	void (*gov_check_cpu)(int cpu, unsigned int load);
+
+	/* Governor specific ops, see below */
+	void *gov_ops;
+};
+
+/* Governor specific ops, will be passed to dbs_data->gov_ops */
+struct od_ops {
+	int (*io_busy)(void);
+	void (*powersave_bias_init_cpu)(int cpu);
+	unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
+			unsigned int freq_next, unsigned int relation);
+	void (*freq_increase)(struct cpufreq_policy *p, unsigned int freq);
+};
+
+struct cs_ops {
+	struct notifier_block *notifier_block;
+};
+
+static inline int delay_for_sampling_rate(unsigned int sampling_rate)
+{
+	int delay = usecs_to_jiffies(sampling_rate);
+
+	/* We want all CPUs to do sampling nearly on same jiffy */
+	if (num_online_cpus() > 1)
+		delay -= jiffies % delay;
+
+	return delay;
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall);
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+		struct cpufreq_policy *policy, unsigned int event);
+#endif /* _CPUFREQ_GOVERNER_H */
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 396322f..7731f7c 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -10,24 +10,23 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/hrtimer.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
 #include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/types.h>
 
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
 
+/* On-demand governor macors */
 #define DEF_FREQUENCY_DOWN_DIFFERENTIAL		(10)
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_SAMPLING_DOWN_FACTOR		(1)
@@ -38,80 +37,14 @@
 #define MIN_FREQUENCY_UP_THRESHOLD		(11)
 #define MAX_FREQUENCY_UP_THRESHOLD		(100)
 
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO			(2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER			(1000)
-#define MIN_LATENCY_MULTIPLIER			(100)
-#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
-				unsigned int event);
+static struct dbs_data od_dbs_data;
+static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info);
 
 #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
+static struct cpufreq_governor cpufreq_gov_ondemand;
 #endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
-       .name                   = "ondemand",
-       .governor               = cpufreq_governor_dbs,
-       .max_transition_latency = TRANSITION_LATENCY_LIMIT,
-       .owner                  = THIS_MODULE,
-};
 
-/* Sampling types */
-enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
-
-struct cpu_dbs_info_s {
-	cputime64_t prev_cpu_idle;
-	cputime64_t prev_cpu_iowait;
-	cputime64_t prev_cpu_wall;
-	cputime64_t prev_cpu_nice;
-	struct cpufreq_policy *cur_policy;
-	struct delayed_work work;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned int freq_lo;
-	unsigned int freq_lo_jiffies;
-	unsigned int freq_hi_jiffies;
-	unsigned int rate_mult;
-	int cpu;
-	unsigned int sample_type:1;
-	/*
-	 * percpu mutex that serializes governor limit change with
-	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
-	 * when user is changing the governor or limits.
-	 */
-	struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, od_cpu_dbs_info);
-
-static unsigned int dbs_enable;	/* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
-	unsigned int sampling_rate;
-	unsigned int up_threshold;
-	unsigned int down_differential;
-	unsigned int ignore_nice;
-	unsigned int sampling_down_factor;
-	unsigned int powersave_bias;
-	unsigned int io_is_busy;
-} dbs_tuners_ins = {
+static struct od_dbs_tuners od_tuners = {
 	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
 	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
 	.down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
@@ -119,48 +52,35 @@ static struct dbs_tuners {
 	.powersave_bias = 0,
 };
 
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
-{
-	u64 idle_time;
-	u64 cur_wall_time;
-	u64 busy_time;
-
-	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
-	busy_time  = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
-	idle_time = cur_wall_time - busy_time;
-	if (wall)
-		*wall = jiffies_to_usecs(cur_wall_time);
-
-	return jiffies_to_usecs(idle_time);
-}
-
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+static void ondemand_powersave_bias_init_cpu(int cpu)
 {
-	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
-	if (idle_time == -1ULL)
-		return get_cpu_idle_time_jiffy(cpu, wall);
-	else
-		idle_time += get_cpu_iowait_time_us(cpu, wall);
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
 
-	return idle_time;
+	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+	dbs_info->freq_lo = 0;
 }
 
-static inline cputime64_t get_cpu_iowait_time(unsigned int cpu, cputime64_t *wall)
+/*
+ * Not all CPUs want IO time to be accounted as busy; this depends on how
+ * efficient idling at a higher frequency/voltage is.
+ * Pavel Machek says this is not so for various generations of AMD and old
+ * Intel systems.
+ * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Because of this, whitelist specific known (series) of CPUs by default, and
+ * leave all others up to the user.
+ */
+static int should_io_be_busy(void)
 {
-	u64 iowait_time = get_cpu_iowait_time_us(cpu, wall);
-
-	if (iowait_time == -1ULL)
-		return 0;
-
-	return iowait_time;
+#if defined(CONFIG_X86)
+	/*
+	 * For Intel, Core 2 (model 15) andl later have an efficient idle.
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+			boot_cpu_data.x86 == 6 &&
+			boot_cpu_data.x86_model >= 15)
+		return 1;
+#endif
+	return 0;
 }
 
 /*
@@ -169,14 +89,13 @@ static inline cputime64_t get_cpu_iowait_time(unsigned int cpu, cputime64_t *wal
  * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
  */
 static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
-					  unsigned int freq_next,
-					  unsigned int relation)
+		unsigned int freq_next, unsigned int relation)
 {
 	unsigned int freq_req, freq_reduc, freq_avg;
 	unsigned int freq_hi, freq_lo;
 	unsigned int index = 0;
 	unsigned int jiffies_total, jiffies_hi, jiffies_lo;
-	struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
 						   policy->cpu);
 
 	if (!dbs_info->freq_table) {
@@ -188,7 +107,7 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
 	cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
 			relation, &index);
 	freq_req = dbs_info->freq_table[index].frequency;
-	freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
+	freq_reduc = freq_req * od_tuners.powersave_bias / 1000;
 	freq_avg = freq_req - freq_reduc;
 
 	/* Find freq bounds for freq_avg in freq_table */
@@ -207,7 +126,7 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
 		dbs_info->freq_lo_jiffies = 0;
 		return freq_lo;
 	}
-	jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+	jiffies_total = usecs_to_jiffies(od_tuners.sampling_rate);
 	jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
 	jiffies_hi += ((freq_hi - freq_lo) / 2);
 	jiffies_hi /= (freq_hi - freq_lo);
@@ -218,13 +137,6 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
 	return freq_hi;
 }
 
-static void ondemand_powersave_bias_init_cpu(int cpu)
-{
-	struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
-	dbs_info->freq_lo = 0;
-}
-
 static void ondemand_powersave_bias_init(void)
 {
 	int i;
@@ -233,83 +145,173 @@ static void ondemand_powersave_bias_init(void)
 	}
 }
 
-/************************** sysfs interface ************************/
+static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
+{
+	if (od_tuners.powersave_bias)
+		freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
+	else if (p->cur == p->max)
+		return;
 
-static ssize_t show_sampling_rate_min(struct kobject *kobj,
-				      struct attribute *attr, char *buf)
+	__cpufreq_driver_target(p, freq, od_tuners.powersave_bias ?
+			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate, we look for
+ * a the lowest frequency which can sustain the load while keeping idle time
+ * over 30%. If such a frequency exist, we try to decrease to this frequency.
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of current frequency
+ */
+static void od_check_cpu(int cpu, unsigned int load_freq)
 {
-	return sprintf(buf, "%u\n", min_sampling_rate);
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
+	struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+
+	dbs_info->freq_lo = 0;
+
+	/* Check for frequency increase */
+	if (load_freq > od_tuners.up_threshold * policy->cur) {
+		/* If switching to max speed, apply sampling_down_factor */
+		if (policy->cur < policy->max)
+			dbs_info->rate_mult =
+				od_tuners.sampling_down_factor;
+		dbs_freq_increase(policy, policy->max);
+		return;
+	}
+
+	/* Check for frequency decrease */
+	/* if we cannot reduce the frequency anymore, break out early */
+	if (policy->cur == policy->min)
+		return;
+
+	/*
+	 * The optimal frequency is the frequency that is the lowest that can
+	 * support the current CPU usage without triggering the up policy. To be
+	 * safe, we focus 10 points under the threshold.
+	 */
+	if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
+			policy->cur) {
+		unsigned int freq_next;
+		freq_next = load_freq / (od_tuners.up_threshold -
+				od_tuners.down_differential);
+
+		/* No longer fully busy, reset rate_mult */
+		dbs_info->rate_mult = 1;
+
+		if (freq_next < policy->min)
+			freq_next = policy->min;
+
+		if (!od_tuners.powersave_bias) {
+			__cpufreq_driver_target(policy, freq_next,
+					CPUFREQ_RELATION_L);
+		} else {
+			int freq = powersave_bias_target(policy, freq_next,
+					CPUFREQ_RELATION_L);
+			__cpufreq_driver_target(policy, freq,
+					CPUFREQ_RELATION_L);
+		}
+	}
 }
 
-define_one_global_ro(sampling_rate_min);
+static void od_dbs_timer(struct work_struct *work)
+{
+	struct od_cpu_dbs_info_s *dbs_info =
+		container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work);
+	unsigned int cpu = dbs_info->cdbs.cpu;
+	int delay, sample_type = dbs_info->sample_type;
+
+	mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+	/* Common NORMAL_SAMPLE setup */
+	dbs_info->sample_type = OD_NORMAL_SAMPLE;
+	if (sample_type == OD_SUB_SAMPLE) {
+		delay = dbs_info->freq_lo_jiffies;
+		__cpufreq_driver_target(dbs_info->cdbs.cur_policy,
+			dbs_info->freq_lo, CPUFREQ_RELATION_H);
+	} else {
+		dbs_check_cpu(&od_dbs_data, cpu);
+		if (dbs_info->freq_lo) {
+			/* Setup timer for SUB_SAMPLE */
+			dbs_info->sample_type = OD_SUB_SAMPLE;
+			delay = dbs_info->freq_hi_jiffies;
+		} else {
+			delay = delay_for_sampling_rate(od_tuners.sampling_rate
+						* dbs_info->rate_mult);
+		}
+	}
+
+	schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+	mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
+/************************** sysfs interface ************************/
 
-/* cpufreq_ondemand Governor Tunables */
-#define show_one(file_name, object)					\
-static ssize_t show_##file_name						\
-(struct kobject *kobj, struct attribute *attr, char *buf)              \
-{									\
-	return sprintf(buf, "%u\n", dbs_tuners_ins.object);		\
+static ssize_t show_sampling_rate_min(struct kobject *kobj,
+				      struct attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", od_dbs_data.min_sampling_rate);
 }
-show_one(sampling_rate, sampling_rate);
-show_one(io_is_busy, io_is_busy);
-show_one(up_threshold, up_threshold);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(ignore_nice_load, ignore_nice);
-show_one(powersave_bias, powersave_bias);
 
 /**
  * update_sampling_rate - update sampling rate effective immediately if needed.
  * @new_rate: new sampling rate
  *
  * If new rate is smaller than the old, simply updaing
- * dbs_tuners_int.sampling_rate might not be appropriate. For example,
- * if the original sampling_rate was 1 second and the requested new sampling
- * rate is 10 ms because the user needs immediate reaction from ondemand
- * governor, but not sure if higher frequency will be required or not,
- * then, the governor may change the sampling rate too late; up to 1 second
- * later. Thus, if we are reducing the sampling rate, we need to make the
- * new value effective immediately.
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
+ * original sampling_rate was 1 second and the requested new sampling rate is 10
+ * ms because the user needs immediate reaction from ondemand governor, but not
+ * sure if higher frequency will be required or not, then, the governor may
+ * change the sampling rate too late; up to 1 second later. Thus, if we are
+ * reducing the sampling rate, we need to make the new value effective
+ * immediately.
  */
 static void update_sampling_rate(unsigned int new_rate)
 {
 	int cpu;
 
-	dbs_tuners_ins.sampling_rate = new_rate
-				     = max(new_rate, min_sampling_rate);
+	od_tuners.sampling_rate = new_rate = max(new_rate,
+			od_dbs_data.min_sampling_rate);
 
 	for_each_online_cpu(cpu) {
 		struct cpufreq_policy *policy;
-		struct cpu_dbs_info_s *dbs_info;
+		struct od_cpu_dbs_info_s *dbs_info;
 		unsigned long next_sampling, appointed_at;
 
 		policy = cpufreq_cpu_get(cpu);
 		if (!policy)
 			continue;
+		if (policy->governor != &cpufreq_gov_ondemand) {
+			cpufreq_cpu_put(policy);
+			continue;
+		}
 		dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
 		cpufreq_cpu_put(policy);
 
-		mutex_lock(&dbs_info->timer_mutex);
+		mutex_lock(&dbs_info->cdbs.timer_mutex);
 
-		if (!delayed_work_pending(&dbs_info->work)) {
-			mutex_unlock(&dbs_info->timer_mutex);
+		if (!delayed_work_pending(&dbs_info->cdbs.work)) {
+			mutex_unlock(&dbs_info->cdbs.timer_mutex);
 			continue;
 		}
 
-		next_sampling  = jiffies + usecs_to_jiffies(new_rate);
-		appointed_at = dbs_info->work.timer.expires;
-
+		next_sampling = jiffies + usecs_to_jiffies(new_rate);
+		appointed_at = dbs_info->cdbs.work.timer.expires;
 
 		if (time_before(next_sampling, appointed_at)) {
 
-			mutex_unlock(&dbs_info->timer_mutex);
-			cancel_delayed_work_sync(&dbs_info->work);
-			mutex_lock(&dbs_info->timer_mutex);
+			mutex_unlock(&dbs_info->cdbs.timer_mutex);
+			cancel_delayed_work_sync(&dbs_info->cdbs.work);
+			mutex_lock(&dbs_info->cdbs.timer_mutex);
 
-			schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
-						 usecs_to_jiffies(new_rate));
+			schedule_delayed_work_on(dbs_info->cdbs.cpu,
+					&dbs_info->cdbs.work,
+					usecs_to_jiffies(new_rate));
 
 		}
-		mutex_unlock(&dbs_info->timer_mutex);
+		mutex_unlock(&dbs_info->cdbs.timer_mutex);
 	}
 }
 
@@ -334,7 +336,7 @@ static ssize_t store_io_is_busy(struct kobject *a, struct attribute *b,
 	ret = sscanf(buf, "%u", &input);
 	if (ret != 1)
 		return -EINVAL;
-	dbs_tuners_ins.io_is_busy = !!input;
+	od_tuners.io_is_busy = !!input;
 	return count;
 }
 
@@ -349,7 +351,7 @@ static ssize_t store_up_threshold(struct kobject *a, struct attribute *b,
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
 		return -EINVAL;
 	}
-	dbs_tuners_ins.up_threshold = input;
+	od_tuners.up_threshold = input;
 	return count;
 }
 
@@ -362,12 +364,12 @@ static ssize_t store_sampling_down_factor(struct kobject *a,
 
 	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
 		return -EINVAL;
-	dbs_tuners_ins.sampling_down_factor = input;
+	od_tuners.sampling_down_factor = input;
 
 	/* Reset down sampling multiplier in case it was active */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
-		dbs_info = &per_cpu(od_cpu_dbs_info, j);
+		struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+				j);
 		dbs_info->rate_mult = 1;
 	}
 	return count;
@@ -388,19 +390,20 @@ static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
 	if (input > 1)
 		input = 1;
 
-	if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
+	if (input == od_tuners.ignore_nice) { /* nothing to do */
 		return count;
 	}
-	dbs_tuners_ins.ignore_nice = input;
+	od_tuners.ignore_nice = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
+		struct od_cpu_dbs_info_s *dbs_info;
 		dbs_info = &per_cpu(od_cpu_dbs_info, j);
-		dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&dbs_info->prev_cpu_wall);
-		if (dbs_tuners_ins.ignore_nice)
-			dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+						&dbs_info->cdbs.prev_cpu_wall);
+		if (od_tuners.ignore_nice)
+			dbs_info->cdbs.prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 
 	}
 	return count;
@@ -419,17 +422,25 @@ static ssize_t store_powersave_bias(struct kobject *a, struct attribute *b,
 	if (input > 1000)
 		input = 1000;
 
-	dbs_tuners_ins.powersave_bias = input;
+	od_tuners.powersave_bias = input;
 	ondemand_powersave_bias_init();
 	return count;
 }
 
+show_one(od, sampling_rate, sampling_rate);
+show_one(od, io_is_busy, io_is_busy);
+show_one(od, up_threshold, up_threshold);
+show_one(od, sampling_down_factor, sampling_down_factor);
+show_one(od, ignore_nice_load, ignore_nice);
+show_one(od, powersave_bias, powersave_bias);
+
 define_one_global_rw(sampling_rate);
 define_one_global_rw(io_is_busy);
 define_one_global_rw(up_threshold);
 define_one_global_rw(sampling_down_factor);
 define_one_global_rw(ignore_nice_load);
 define_one_global_rw(powersave_bias);
+define_one_global_ro(sampling_rate_min);
 
 static struct attribute *dbs_attributes[] = {
 	&sampling_rate_min.attr,
@@ -442,354 +453,71 @@ static struct attribute *dbs_attributes[] = {
 	NULL
 };
 
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group od_attr_group = {
 	.attrs = dbs_attributes,
 	.name = "ondemand",
 };
 
 /************************** sysfs end ************************/
 
-static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
-{
-	if (dbs_tuners_ins.powersave_bias)
-		freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
-	else if (p->cur == p->max)
-		return;
-
-	__cpufreq_driver_target(p, freq, dbs_tuners_ins.powersave_bias ?
-			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
-}
-
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
-	unsigned int max_load_freq;
-
-	struct cpufreq_policy *policy;
-	unsigned int j;
-
-	this_dbs_info->freq_lo = 0;
-	policy = this_dbs_info->cur_policy;
-
-	/*
-	 * Every sampling_rate, we check, if current idle time is less
-	 * than 20% (default), then we try to increase frequency
-	 * Every sampling_rate, we look for a the lowest
-	 * frequency which can sustain the load while keeping idle time over
-	 * 30%. If such a frequency exist, we try to decrease to this frequency.
-	 *
-	 * Any frequency increase takes it to the maximum frequency.
-	 * Frequency reduction happens at minimum steps of
-	 * 5% (default) of current frequency
-	 */
-
-	/* Get Absolute Load - in terms of freq */
-	max_load_freq = 0;
-
-	for_each_cpu(j, policy->cpus) {
-		struct cpu_dbs_info_s *j_dbs_info;
-		cputime64_t cur_wall_time, cur_idle_time, cur_iowait_time;
-		unsigned int idle_time, wall_time, iowait_time;
-		unsigned int load, load_freq;
-		int freq_avg;
-
-		j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-
-		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-		cur_iowait_time = get_cpu_iowait_time(j, &cur_wall_time);
-
-		wall_time = (unsigned int)
-			(cur_wall_time - j_dbs_info->prev_cpu_wall);
-		j_dbs_info->prev_cpu_wall = cur_wall_time;
-
-		idle_time = (unsigned int)
-			(cur_idle_time - j_dbs_info->prev_cpu_idle);
-		j_dbs_info->prev_cpu_idle = cur_idle_time;
-
-		iowait_time = (unsigned int)
-			(cur_iowait_time - j_dbs_info->prev_cpu_iowait);
-		j_dbs_info->prev_cpu_iowait = cur_iowait_time;
-
-		if (dbs_tuners_ins.ignore_nice) {
-			u64 cur_nice;
-			unsigned long cur_nice_jiffies;
-
-			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
-					 j_dbs_info->prev_cpu_nice;
-			/*
-			 * Assumption: nice time between sampling periods will
-			 * be less than 2^32 jiffies for 32 bit sys
-			 */
-			cur_nice_jiffies = (unsigned long)
-					cputime64_to_jiffies64(cur_nice);
-
-			j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-			idle_time += jiffies_to_usecs(cur_nice_jiffies);
-		}
-
-		/*
-		 * For the purpose of ondemand, waiting for disk IO is an
-		 * indication that you're performance critical, and not that
-		 * the system is actually idle. So subtract the iowait time
-		 * from the cpu idle time.
-		 */
-
-		if (dbs_tuners_ins.io_is_busy && idle_time >= iowait_time)
-			idle_time -= iowait_time;
-
-		if (unlikely(!wall_time || wall_time < idle_time))
-			continue;
-
-		load = 100 * (wall_time - idle_time) / wall_time;
-
-		freq_avg = __cpufreq_driver_getavg(policy, j);
-		if (freq_avg <= 0)
-			freq_avg = policy->cur;
-
-		load_freq = load * freq_avg;
-		if (load_freq > max_load_freq)
-			max_load_freq = load_freq;
-	}
+define_get_cpu_dbs_routines(od_cpu_dbs_info);
 
-	/* Check for frequency increase */
-	if (max_load_freq > dbs_tuners_ins.up_threshold * policy->cur) {
-		/* If switching to max speed, apply sampling_down_factor */
-		if (policy->cur < policy->max)
-			this_dbs_info->rate_mult =
-				dbs_tuners_ins.sampling_down_factor;
-		dbs_freq_increase(policy, policy->max);
-		return;
-	}
-
-	/* Check for frequency decrease */
-	/* if we cannot reduce the frequency anymore, break out early */
-	if (policy->cur == policy->min)
-		return;
-
-	/*
-	 * The optimal frequency is the frequency that is the lowest that
-	 * can support the current CPU usage without triggering the up
-	 * policy. To be safe, we focus 10 points under the threshold.
-	 */
-	if (max_load_freq <
-	    (dbs_tuners_ins.up_threshold - dbs_tuners_ins.down_differential) *
-	     policy->cur) {
-		unsigned int freq_next;
-		freq_next = max_load_freq /
-				(dbs_tuners_ins.up_threshold -
-				 dbs_tuners_ins.down_differential);
-
-		/* No longer fully busy, reset rate_mult */
-		this_dbs_info->rate_mult = 1;
-
-		if (freq_next < policy->min)
-			freq_next = policy->min;
-
-		if (!dbs_tuners_ins.powersave_bias) {
-			__cpufreq_driver_target(policy, freq_next,
-					CPUFREQ_RELATION_L);
-		} else {
-			int freq = powersave_bias_target(policy, freq_next,
-					CPUFREQ_RELATION_L);
-			__cpufreq_driver_target(policy, freq,
-				CPUFREQ_RELATION_L);
-		}
-	}
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
-	struct cpu_dbs_info_s *dbs_info =
-		container_of(work, struct cpu_dbs_info_s, work.work);
-	unsigned int cpu = dbs_info->cpu;
-	int sample_type = dbs_info->sample_type;
-
-	int delay;
-
-	mutex_lock(&dbs_info->timer_mutex);
-
-	/* Common NORMAL_SAMPLE setup */
-	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
-	if (!dbs_tuners_ins.powersave_bias ||
-	    sample_type == DBS_NORMAL_SAMPLE) {
-		dbs_check_cpu(dbs_info);
-		if (dbs_info->freq_lo) {
-			/* Setup timer for SUB_SAMPLE */
-			dbs_info->sample_type = DBS_SUB_SAMPLE;
-			delay = dbs_info->freq_hi_jiffies;
-		} else {
-			/* We want all CPUs to do sampling nearly on
-			 * same jiffy
-			 */
-			delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate
-				* dbs_info->rate_mult);
-
-			if (num_online_cpus() > 1)
-				delay -= jiffies % delay;
-		}
-	} else {
-		__cpufreq_driver_target(dbs_info->cur_policy,
-			dbs_info->freq_lo, CPUFREQ_RELATION_H);
-		delay = dbs_info->freq_lo_jiffies;
-	}
-	schedule_delayed_work_on(cpu, &dbs_info->work, delay);
-	mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
-	if (num_online_cpus() > 1)
-		delay -= jiffies % delay;
+static struct od_ops od_ops = {
+	.io_busy = should_io_be_busy,
+	.powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu,
+	.powersave_bias_target = powersave_bias_target,
+	.freq_increase = dbs_freq_increase,
+};
 
-	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
-	INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
-	schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
+static struct dbs_data od_dbs_data = {
+	.governor = GOV_ONDEMAND,
+	.attr_group = &od_attr_group,
+	.tuners = &od_tuners,
+	.get_cpu_cdbs = get_cpu_cdbs,
+	.get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+	.gov_dbs_timer = od_dbs_timer,
+	.gov_check_cpu = od_check_cpu,
+	.gov_ops = &od_ops,
+};
 
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
+static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
+		unsigned int event)
 {
-	cancel_delayed_work_sync(&dbs_info->work);
+	return cpufreq_governor_dbs(&od_dbs_data, policy, event);
 }
 
-/*
- * Not all CPUs want IO time to be accounted as busy; this dependson how
- * efficient idling at a higher frequency/voltage is.
- * Pavel Machek says this is not so for various generations of AMD and old
- * Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
- * Because of this, whitelist specific known (series) of CPUs by default, and
- * leave all others up to the user.
- */
-static int should_io_be_busy(void)
-{
-#if defined(CONFIG_X86)
-	/*
-	 * For Intel, Core 2 (model 15) andl later have an efficient idle.
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-	    boot_cpu_data.x86 == 6 &&
-	    boot_cpu_data.x86_model >= 15)
-		return 1;
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+static
 #endif
-	return 0;
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
-				   unsigned int event)
-{
-	unsigned int cpu = policy->cpu;
-	struct cpu_dbs_info_s *this_dbs_info;
-	unsigned int j;
-	int rc;
-
-	this_dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-
-	switch (event) {
-	case CPUFREQ_GOV_START:
-		if ((!cpu_online(cpu)) || (!policy->cur))
-			return -EINVAL;
-
-		mutex_lock(&dbs_mutex);
-
-		dbs_enable++;
-		for_each_cpu(j, policy->cpus) {
-			struct cpu_dbs_info_s *j_dbs_info;
-			j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-			j_dbs_info->cur_policy = policy;
-
-			j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&j_dbs_info->prev_cpu_wall);
-			if (dbs_tuners_ins.ignore_nice)
-				j_dbs_info->prev_cpu_nice =
-						kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-		}
-		this_dbs_info->cpu = cpu;
-		this_dbs_info->rate_mult = 1;
-		ondemand_powersave_bias_init_cpu(cpu);
-		/*
-		 * Start the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 1) {
-			unsigned int latency;
-
-			rc = sysfs_create_group(cpufreq_global_kobject,
-						&dbs_attr_group);
-			if (rc) {
-				mutex_unlock(&dbs_mutex);
-				return rc;
-			}
-
-			/* policy latency is in nS. Convert it to uS first */
-			latency = policy->cpuinfo.transition_latency / 1000;
-			if (latency == 0)
-				latency = 1;
-			/* Bring kernel and HW constraints together */
-			min_sampling_rate = max(min_sampling_rate,
-					MIN_LATENCY_MULTIPLIER * latency);
-			dbs_tuners_ins.sampling_rate =
-				max(min_sampling_rate,
-				    latency * LATENCY_MULTIPLIER);
-			dbs_tuners_ins.io_is_busy = should_io_be_busy();
-		}
-		mutex_unlock(&dbs_mutex);
-
-		mutex_init(&this_dbs_info->timer_mutex);
-		dbs_timer_init(this_dbs_info);
-		break;
-
-	case CPUFREQ_GOV_STOP:
-		dbs_timer_exit(this_dbs_info);
-
-		mutex_lock(&dbs_mutex);
-		mutex_destroy(&this_dbs_info->timer_mutex);
-		dbs_enable--;
-		mutex_unlock(&dbs_mutex);
-		if (!dbs_enable)
-			sysfs_remove_group(cpufreq_global_kobject,
-					   &dbs_attr_group);
-
-		break;
-
-	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&this_dbs_info->timer_mutex);
-		if (policy->max < this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(this_dbs_info->cur_policy,
-				policy->max, CPUFREQ_RELATION_H);
-		else if (policy->min > this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(this_dbs_info->cur_policy,
-				policy->min, CPUFREQ_RELATION_L);
-		dbs_check_cpu(this_dbs_info);
-		mutex_unlock(&this_dbs_info->timer_mutex);
-		break;
-	}
-	return 0;
-}
+struct cpufreq_governor cpufreq_gov_ondemand = {
+	.name			= "ondemand",
+	.governor		= od_cpufreq_governor_dbs,
+	.max_transition_latency	= TRANSITION_LATENCY_LIMIT,
+	.owner			= THIS_MODULE,
+};
 
 static int __init cpufreq_gov_dbs_init(void)
 {
 	u64 idle_time;
 	int cpu = get_cpu();
 
+	mutex_init(&od_dbs_data.mutex);
 	idle_time = get_cpu_idle_time_us(cpu, NULL);
 	put_cpu();
 	if (idle_time != -1ULL) {
 		/* Idle micro accounting is supported. Use finer thresholds */
-		dbs_tuners_ins.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
-		dbs_tuners_ins.down_differential =
-					MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+		od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
+		od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
 		/*
 		 * In nohz/micro accounting case we set the minimum frequency
 		 * not depending on HZ, but fixed (very low). The deferred
 		 * timer might skip some samples if idle/sleeping as needed.
 		*/
-		min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
+		od_dbs_data.min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
 	} else {
 		/* For correct statistics, we need 10 ticks for each measure */
-		min_sampling_rate =
-			MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
+		od_dbs_data.min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+			jiffies_to_usecs(10);
 	}
 
 	return cpufreq_register_governor(&cpufreq_gov_ondemand);
@@ -800,7 +528,6 @@ static void __exit cpufreq_gov_dbs_exit(void)
 	cpufreq_unregister_governor(&cpufreq_gov_ondemand);
 }
 
-
 MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
 MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>");
 MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index f13a8a9..ceee068 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -10,6 +10,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index 4c2eb51..2d948a1 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -10,6 +10,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 3998316..e40e508 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -37,7 +37,7 @@ struct cpufreq_stats {
 	unsigned int max_state;
 	unsigned int state_num;
 	unsigned int last_index;
-	cputime64_t *time_in_state;
+	u64 *time_in_state;
 	unsigned int *freq_table;
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	unsigned int *trans_table;
@@ -223,7 +223,7 @@ static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
 		count++;
 	}
 
-	alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
+	alloc_size = count * sizeof(int) + count * sizeof(u64);
 
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	alloc_size += count * count * sizeof(int);
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index bedac1a..c8c3d29 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -11,6 +11,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/smp.h>
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index af2d81e..7012ea8 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -31,13 +31,13 @@ static unsigned int locking_frequency;
 static bool frequency_locked;
 static DEFINE_MUTEX(cpufreq_lock);
 
-int exynos_verify_speed(struct cpufreq_policy *policy)
+static int exynos_verify_speed(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy,
 					      exynos_info->freq_table);
 }
 
-unsigned int exynos_getspeed(unsigned int cpu)
+static unsigned int exynos_getspeed(unsigned int cpu)
 {
 	return clk_get_rate(exynos_info->cpu_clk) / 1000;
 }
@@ -100,7 +100,8 @@ static int exynos_target(struct cpufreq_policy *policy,
 	}
 	arm_volt = volt_table[index];
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* When the new frequency is higher than current frequency */
 	if ((freqs.new > freqs.old) && !safe_arm_volt) {
@@ -115,7 +116,8 @@ static int exynos_target(struct cpufreq_policy *policy,
 	if (freqs.new != freqs.old)
 		exynos_info->set_freq(old_index, index);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	/* When the new frequency is lower than current frequency */
 	if ((freqs.new < freqs.old) ||
@@ -235,6 +237,7 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		cpumask_copy(policy->related_cpus, cpu_possible_mask);
 		cpumask_copy(policy->cpus, cpu_online_mask);
 	} else {
+		policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
 		cpumask_setall(policy->cpus);
 	}
 
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 90431cb..49cda25 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -9,6 +9,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 53ddbc7..f1fa500 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -930,7 +930,7 @@ static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+static int longhaul_cpu_exit(struct cpufreq_policy *policy)
 {
 	cpufreq_frequency_table_put_attr(policy->cpu);
 	return 0;
@@ -946,7 +946,7 @@ static struct cpufreq_driver longhaul_driver = {
 	.target	= longhaul_target,
 	.get	= longhaul_get,
 	.init	= longhaul_cpu_init,
-	.exit	= __devexit_p(longhaul_cpu_exit),
+	.exit	= longhaul_cpu_exit,
 	.name	= "longhaul",
 	.owner	= THIS_MODULE,
 	.attr	= longhaul_attr,
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index e3ebb4f..056faf6 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1186,7 +1186,7 @@ err_out:
 	return -ENODEV;
 }
 
-static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
+static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
@@ -1242,7 +1242,7 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
 	.target		= powernowk8_target,
 	.bios_limit	= acpi_processor_get_bios_limit,
 	.init		= powernowk8_cpu_init,
-	.exit		= __devexit_p(powernowk8_cpu_exit),
+	.exit		= powernowk8_cpu_exit,
 	.get		= powernowk8_get,
 	.name		= "powernow-k8",
 	.owner		= THIS_MODULE,
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
new file mode 100644
index 0000000..4575cfe
--- /dev/null
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -0,0 +1,291 @@
+/*
+ * drivers/cpufreq/spear-cpufreq.c
+ *
+ * CPU Frequency Scaling for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SPEAr CPUFreq driver data structure */
+static struct {
+	struct clk *clk;
+	unsigned int transition_latency;
+	struct cpufreq_frequency_table *freq_tbl;
+	u32 cnt;
+} spear_cpufreq;
+
+int spear_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl);
+}
+
+static unsigned int spear_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(spear_cpufreq.clk) / 1000;
+}
+
+static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
+{
+	struct clk *sys_pclk;
+	int pclk;
+	/*
+	 * In SPEAr1340, cpu clk's parent sys clk can take input from
+	 * following sources
+	 */
+	const char *sys_clk_src[] = {
+		"sys_syn_clk",
+		"pll1_clk",
+		"pll2_clk",
+		"pll3_clk",
+	};
+
+	/*
+	 * As sys clk can have multiple source with their own range
+	 * limitation so we choose possible sources accordingly
+	 */
+	if (newfreq <= 300000000)
+		pclk = 0; /* src is sys_syn_clk */
+	else if (newfreq > 300000000 && newfreq <= 500000000)
+		pclk = 3; /* src is pll3_clk */
+	else if (newfreq == 600000000)
+		pclk = 1; /* src is pll1_clk */
+	else
+		return ERR_PTR(-EINVAL);
+
+	/* Get parent to sys clock */
+	sys_pclk = clk_get(NULL, sys_clk_src[pclk]);
+	if (IS_ERR(sys_pclk))
+		pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);
+
+	return sys_pclk;
+}
+
+/*
+ * In SPEAr1340, we cannot use newfreq directly because we need to actually
+ * access a source clock (clk) which might not be ancestor of cpu at present.
+ * Hence in SPEAr1340 we would operate on source clock directly before switching
+ * cpu clock to it.
+ */
+static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
+{
+	struct clk *sys_clk;
+	int ret = 0;
+
+	sys_clk = clk_get_parent(spear_cpufreq.clk);
+	if (IS_ERR(sys_clk)) {
+		pr_err("failed to get cpu's parent (sys) clock\n");
+		return PTR_ERR(sys_clk);
+	}
+
+	/* Set the rate of the source clock before changing the parent */
+	ret = clk_set_rate(sys_pclk, newfreq);
+	if (ret) {
+		pr_err("Failed to set sys clk rate to %lu\n", newfreq);
+		return ret;
+	}
+
+	ret = clk_set_parent(sys_clk, sys_pclk);
+	if (ret) {
+		pr_err("Failed to set sys clk parent\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int spear_cpufreq_target(struct cpufreq_policy *policy,
+		unsigned int target_freq, unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned long newfreq;
+	struct clk *srcclk;
+	int index, ret, mult = 1;
+
+	if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl,
+				target_freq, relation, &index))
+		return -EINVAL;
+
+	freqs.cpu = policy->cpu;
+	freqs.old = spear_cpufreq_get(0);
+
+	newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
+	if (of_machine_is_compatible("st,spear1340")) {
+		/*
+		 * SPEAr1340 is special in the sense that due to the possibility
+		 * of multiple clock sources for cpu clk's parent we can have
+		 * different clock source for different frequency of cpu clk.
+		 * Hence we need to choose one from amongst these possible clock
+		 * sources.
+		 */
+		srcclk = spear1340_cpu_get_possible_parent(newfreq);
+		if (IS_ERR(srcclk)) {
+			pr_err("Failed to get src clk\n");
+			return PTR_ERR(srcclk);
+		}
+
+		/* SPEAr1340: src clk is always 2 * intended cpu clk */
+		mult = 2;
+	} else {
+		/*
+		 * src clock to be altered is ancestor of cpu clock. Hence we
+		 * can directly work on cpu clk
+		 */
+		srcclk = spear_cpufreq.clk;
+	}
+
+	newfreq = clk_round_rate(srcclk, newfreq * mult);
+	if (newfreq < 0) {
+		pr_err("clk_round_rate failed for cpu src clock\n");
+		return newfreq;
+	}
+
+	freqs.new = newfreq / 1000;
+	freqs.new /= mult;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (mult == 2)
+		ret = spear1340_set_cpu_rate(srcclk, newfreq);
+	else
+		ret = clk_set_rate(spear_cpufreq.clk, newfreq);
+
+	/* Get current rate after clk_set_rate, in case of failure */
+	if (ret) {
+		pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
+		freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return ret;
+}
+
+static int spear_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl);
+	if (ret) {
+		pr_err("cpufreq_frequency_table_cpuinfo() failed");
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu);
+	policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency;
+	policy->cur = spear_cpufreq_get(0);
+
+	cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+	cpumask_copy(policy->related_cpus, policy->cpus);
+
+	return 0;
+}
+
+static int spear_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *spear_cpufreq_attr[] = {
+	 &cpufreq_freq_attr_scaling_available_freqs,
+	 NULL,
+};
+
+static struct cpufreq_driver spear_cpufreq_driver = {
+	.name		= "cpufreq-spear",
+	.flags		= CPUFREQ_STICKY,
+	.verify		= spear_cpufreq_verify,
+	.target		= spear_cpufreq_target,
+	.get		= spear_cpufreq_get,
+	.init		= spear_cpufreq_init,
+	.exit		= spear_cpufreq_exit,
+	.attr		= spear_cpufreq_attr,
+};
+
+static int spear_cpufreq_driver_init(void)
+{
+	struct device_node *np;
+	const struct property *prop;
+	struct cpufreq_frequency_table *freq_tbl;
+	const __be32 *val;
+	int cnt, i, ret;
+
+	np = of_find_node_by_path("/cpus/cpu@0");
+	if (!np) {
+		pr_err("No cpu node found");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "clock-latency",
+				&spear_cpufreq.transition_latency))
+		spear_cpufreq.transition_latency = CPUFREQ_ETERNAL;
+
+	prop = of_find_property(np, "cpufreq_tbl", NULL);
+	if (!prop || !prop->value) {
+		pr_err("Invalid cpufreq_tbl");
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	cnt = prop->length / sizeof(u32);
+	val = prop->value;
+
+	freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+	if (!freq_tbl) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	for (i = 0; i < cnt; i++) {
+		freq_tbl[i].index = i;
+		freq_tbl[i].frequency = be32_to_cpup(val++);
+	}
+
+	freq_tbl[i].index = i;
+	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+	spear_cpufreq.freq_tbl = freq_tbl;
+
+	of_node_put(np);
+
+	spear_cpufreq.clk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(spear_cpufreq.clk)) {
+		pr_err("Unable to get CPU clock\n");
+		ret = PTR_ERR(spear_cpufreq.clk);
+		goto out_put_mem;
+	}
+
+	ret = cpufreq_register_driver(&spear_cpufreq_driver);
+	if (!ret)
+		return 0;
+
+	pr_err("failed register driver: %d\n", ret);
+	clk_put(spear_cpufreq.clk);
+
+out_put_mem:
+	kfree(freq_tbl);
+	return ret;
+
+out_put_node:
+	of_node_put(np);
+	return ret;
+}
+late_initcall(spear_cpufreq_driver_init);
+
+MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>");
+MODULE_DESCRIPTION("SPEAr CPUFreq driver");
+MODULE_LICENSE("GPL");