cpufreq: exynos: remove Exynos4210 specific cpufreq driver support

Exynos4210 based platforms have switched over to use generic
cpufreq driver for cpufreq functionality. So the Exynos
specific cpufreq support for these platforms can be removed.

Changes by Bartlomiej:
- dropped Exynos5250 support removal for now
- updated exynos-cpufreq.[c,h]

Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

5 files changed, 1 insertions, 209 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4f3dbc8..a86a196 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -36,17 +36,6 @@ config ARM_EXYNOS_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_EXYNOS4210_CPUFREQ
-	bool "SAMSUNG EXYNOS4210"
-	depends on CPU_EXYNOS4210
-	depends on ARM_EXYNOS_CPUFREQ
-	default y
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4210
-	  SoC (S5PV310 or S5PC210).
-
-	  If in doubt, say N.
-
 config ARM_EXYNOS4X12_CPUFREQ
 	bool "SAMSUNG EXYNOS4x12"
 	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index cdce92a..2169bf7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= arm-exynos-cpufreq.o
 arm-exynos-cpufreq-y					:= exynos-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 82d2fbb..fb24aaf 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -168,10 +168,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 
 	exynos_info->dev = &pdev->dev;
 
-	if (of_machine_is_compatible("samsung,exynos4210")) {
-		exynos_info->type = EXYNOS_SOC_4210;
-		ret = exynos4210_cpufreq_init(exynos_info);
-	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+	if (of_machine_is_compatible("samsung,exynos4212")) {
 		exynos_info->type = EXYNOS_SOC_4212;
 		ret = exynos4x12_cpufreq_init(exynos_info);
 	} else if (of_machine_is_compatible("samsung,exynos4412")) {
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 9f2062a..a3855e4 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -18,7 +18,6 @@ enum cpufreq_level_index {
 };
 
 enum exynos_soc_type {
-	EXYNOS_SOC_4210,
 	EXYNOS_SOC_4212,
 	EXYNOS_SOC_4412,
 	EXYNOS_SOC_5250,
@@ -53,14 +52,6 @@ struct exynos_dvfs_info {
 	void __iomem	*cmu_regs;
 };
 
-#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
-extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
-	return -EOPNOTSUPP;
-}
-#endif
 #ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
 extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
 #else
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
deleted file mode 100644
index 843ec82..0000000
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos4210_volt_table[] = {
-	1250000, 1150000, 1050000, 975000, 950000,
-};
-
-static struct cpufreq_frequency_table exynos4210_freq_table[] = {
-	{0, L0, 1200 * 1000},
-	{0, L1, 1000 * 1000},
-	{0, L2,  800 * 1000},
-	{0, L3,  500 * 1000},
-	{0, L4,  200 * 1000},
-	{0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_4210[] = {
-	/*
-	 * values:
-	 * freq
-	 * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED
-	 * clock divider for COPY, HPM, RESERVED
-	 * PLL M, P, S
-	 */
-	APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
-	APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
-	APLL_FREQ(800,  0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
-	APLL_FREQ(500,  0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
-	APLL_FREQ(200,  0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
-};
-
-static void exynos4210_set_clkdiv(unsigned int div_index)
-{
-	unsigned int tmp;
-
-	/* Change Divider - CPU0 */
-
-	tmp = apll_freq_4210[div_index].clk_div_cpu0;
-
-	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
-	} while (tmp & 0x1111111);
-
-	/* Change Divider - CPU1 */
-
-	tmp = apll_freq_4210[div_index].clk_div_cpu1;
-
-	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
-	} while (tmp & 0x11);
-}
-
-static void exynos4210_set_apll(unsigned int index)
-{
-	unsigned int tmp, freq = apll_freq_4210[index].freq;
-
-	/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
-	clk_set_parent(moutcore, mout_mpll);
-
-	do {
-		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
-			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
-		tmp &= 0x7;
-	} while (tmp != 0x2);
-
-	clk_set_rate(mout_apll, freq * 1000);
-
-	/* MUX_CORE_SEL = APLL */
-	clk_set_parent(moutcore, mout_apll);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
-		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
-	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4210_set_frequency(unsigned int old_index,
-				     unsigned int new_index)
-{
-	if (old_index > new_index) {
-		exynos4210_set_clkdiv(new_index);
-		exynos4210_set_apll(new_index);
-	} else if (old_index < new_index) {
-		exynos4210_set_apll(new_index);
-		exynos4210_set_clkdiv(new_index);
-	}
-}
-
-int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
-	struct device_node *np;
-	unsigned long rate;
-
-	/*
-	 * HACK: This is a temporary workaround to get access to clock
-	 * controller registers directly and remove static mappings and
-	 * dependencies on platform headers. It is necessary to enable
-	 * Exynos multi-platform support and will be removed together with
-	 * this whole driver as soon as Exynos gets migrated to use
-	 * cpufreq-dt driver.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
-	if (!np) {
-		pr_err("%s: failed to find clock controller DT node\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	info->cmu_regs = of_iomap(np, 0);
-	if (!info->cmu_regs) {
-		pr_err("%s: failed to map CMU registers\n", __func__);
-		return -EFAULT;
-	}
-
-	cpu_clk = clk_get(NULL, "armclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	moutcore = clk_get(NULL, "moutcore");
-	if (IS_ERR(moutcore))
-		goto err_moutcore;
-
-	mout_mpll = clk_get(NULL, "mout_mpll");
-	if (IS_ERR(mout_mpll))
-		goto err_mout_mpll;
-
-	rate = clk_get_rate(mout_mpll) / 1000;
-
-	mout_apll = clk_get(NULL, "mout_apll");
-	if (IS_ERR(mout_apll))
-		goto err_mout_apll;
-
-	info->mpll_freq_khz = rate;
-	/* 800Mhz */
-	info->pll_safe_idx = L2;
-	info->cpu_clk = cpu_clk;
-	info->volt_table = exynos4210_volt_table;
-	info->freq_table = exynos4210_freq_table;
-	info->set_freq = exynos4210_set_frequency;
-
-	cpufreq = info;
-
-	return 0;
-
-err_mout_apll:
-	clk_put(mout_mpll);
-err_mout_mpll:
-	clk_put(moutcore);
-err_moutcore:
-	clk_put(cpu_clk);
-
-	pr_debug("%s: failed initialization\n", __func__);
-	return -EINVAL;
-}