Merge back earlier 'pm-cpufreq' material.

33 files changed, 426 insertions, 206 deletions

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 38093e2..386dbc9 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -181,7 +181,8 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 config GENERIC_CPUFREQ_CPU0
 	tristate "Generic CPU0 cpufreq driver"
-	depends on HAVE_CLK && REGULATOR && PM_OPP && OF
+	depends on HAVE_CLK && REGULATOR && OF
+	select PM_OPP
 	help
 	  This adds a generic cpufreq driver for CPU0 frequency management.
 	  It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ce52ed9..0468ad1 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -4,7 +4,8 @@
 
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
-	depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK
+	depends on ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK
+	select PM_OPP
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
@@ -54,7 +55,8 @@ config ARM_EXYNOS5250_CPUFREQ
 config ARM_EXYNOS5440_CPUFREQ
 	bool "SAMSUNG EXYNOS5440"
 	depends on SOC_EXYNOS5440
-	depends on HAVE_CLK && PM_OPP && OF
+	depends on HAVE_CLK && OF
+	select PM_OPP
 	default y
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5440
@@ -79,11 +81,11 @@ config ARM_HIGHBANK_CPUFREQ
 	  If in doubt, say N.
 
 config ARM_IMX6Q_CPUFREQ
-	tristate "Freescale i.MX6Q cpufreq support"
-	depends on SOC_IMX6Q
+	tristate "Freescale i.MX6 cpufreq support"
+	depends on ARCH_MXC
 	depends on REGULATOR_ANATOP
 	help
-	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
+	  This adds cpufreq driver support for Freescale i.MX6 series SoCs.
 
 	  If in doubt, say N.
 
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 5519933..72f87e9 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -488,7 +488,8 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy)
 static struct cpufreq_driver bL_cpufreq_driver = {
 	.name			= "arm-big-little",
 	.flags			= CPUFREQ_STICKY |
-					CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+					CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+					CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify			= cpufreq_generic_frequency_table_verify,
 	.target_index		= bL_cpufreq_set_target,
 	.get			= bL_cpufreq_get_rate,
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index d4585ce..0faf756 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -44,7 +44,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 	int ret;
 
 	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-	if (freq_Hz < 0)
+	if (freq_Hz <= 0)
 		freq_Hz = freq_table[index].frequency * 1000;
 
 	freq_exact = freq_Hz;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d19f7c..3509ca0 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -39,7 +39,7 @@ static struct cpufreq_driver *cpufreq_driver;
 static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
 static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data_fallback);
 static DEFINE_RWLOCK(cpufreq_driver_lock);
-static DEFINE_MUTEX(cpufreq_governor_lock);
+DEFINE_MUTEX(cpufreq_governor_lock);
 static LIST_HEAD(cpufreq_policy_list);
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -320,6 +320,20 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy,
 }
 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
 
+/* Do post notifications when there are chances that transition has failed */
+void cpufreq_notify_post_transition(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs, int transition_failed)
+{
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE);
+	if (!transition_failed)
+		return;
+
+	swap(freqs->old, freqs->new);
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE);
+}
+EXPORT_SYMBOL_GPL(cpufreq_notify_post_transition);
+
 
 /*********************************************************************
  *                          SYSFS INTERFACE                          *
@@ -1059,6 +1073,46 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
 		}
 	}
 
+	/*
+	 * Sometimes boot loaders set CPU frequency to a value outside of
+	 * frequency table present with cpufreq core. In such cases CPU might be
+	 * unstable if it has to run on that frequency for long duration of time
+	 * and so its better to set it to a frequency which is specified in
+	 * freq-table. This also makes cpufreq stats inconsistent as
+	 * cpufreq-stats would fail to register because current frequency of CPU
+	 * isn't found in freq-table.
+	 *
+	 * Because we don't want this change to effect boot process badly, we go
+	 * for the next freq which is >= policy->cur ('cur' must be set by now,
+	 * otherwise we will end up setting freq to lowest of the table as 'cur'
+	 * is initialized to zero).
+	 *
+	 * We are passing target-freq as "policy->cur - 1" otherwise
+	 * __cpufreq_driver_target() would simply fail, as policy->cur will be
+	 * equal to target-freq.
+	 */
+	if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK)
+	    && has_target()) {
+		/* Are we running at unknown frequency ? */
+		ret = cpufreq_frequency_table_get_index(policy, policy->cur);
+		if (ret == -EINVAL) {
+			/* Warn user and fix it */
+			pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n",
+				__func__, policy->cpu, policy->cur);
+			ret = __cpufreq_driver_target(policy, policy->cur - 1,
+				CPUFREQ_RELATION_L);
+
+			/*
+			 * Reaching here after boot in a few seconds may not
+			 * mean that system will remain stable at "unknown"
+			 * frequency for longer duration. Hence, a BUG_ON().
+			 */
+			BUG_ON(ret);
+			pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n",
+				__func__, policy->cpu, policy->cur);
+		}
+	}
+
 	/* related cpus should atleast have policy->cpus */
 	cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
 
@@ -1725,17 +1779,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			pr_err("%s: Failed to change cpu frequency: %d\n",
 					__func__, retval);
 
-		if (notify) {
-			/*
-			 * Notify with old freq in case we failed to change
-			 * frequency
-			 */
-			if (retval)
-				freqs.new = freqs.old;
-
-			cpufreq_notify_transition(policy, &freqs,
-					CPUFREQ_POSTCHANGE);
-		}
+		if (notify)
+			cpufreq_notify_post_transition(policy, &freqs, retval);
 	}
 
 out:
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index e6be635..ba43991 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -119,8 +119,9 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy,
 {
 	int i;
 
+	mutex_lock(&cpufreq_governor_lock);
 	if (!policy->governor_enabled)
-		return;
+		goto out_unlock;
 
 	if (!all_cpus) {
 		/*
@@ -135,6 +136,9 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy,
 		for_each_cpu(i, policy->cpus)
 			__gov_queue_work(i, dbs_data, delay);
 	}
+
+out_unlock:
+	mutex_unlock(&cpufreq_governor_lock);
 }
 EXPORT_SYMBOL_GPL(gov_queue_work);
 
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index b5f2b86..bfb9ae1 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -257,6 +257,8 @@ static ssize_t show_sampling_rate_min_gov_pol				\
 	return sprintf(buf, "%u\n", dbs_data->min_sampling_rate);	\
 }
 
+extern struct mutex cpufreq_governor_lock;
+
 void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
 bool need_load_eval(struct cpu_dbs_common_info *cdbs,
 		unsigned int sampling_rate);
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index 5e8a854..04f3390 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -126,7 +126,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver davinci_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= davinci_verify_speed,
 	.target_index	= davinci_target,
 	.get		= davinci_getspeed,
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 0e67ab9..21d9898 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -48,7 +48,8 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver dbx500_cpufreq_driver = {
-	.flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS,
+	.flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
+			CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = dbx500_cpufreq_target,
 	.get    = dbx500_cpufreq_getspeed,
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f3c2287..f7c322c 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
 #include <linux/suspend.h>
+#include <linux/platform_device.h>
 
 #include <plat/cpu.h>
 
@@ -218,7 +219,7 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver exynos_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= exynos_target,
 	.get		= exynos_getspeed,
@@ -232,7 +233,7 @@ static struct cpufreq_driver exynos_driver = {
 #endif
 };
 
-static int __init exynos_cpufreq_init(void)
+static int exynos_cpufreq_probe(struct platform_device *pdev)
 {
 	int ret = -EINVAL;
 
@@ -281,4 +282,12 @@ err_vdd_arm:
 	kfree(exynos_info);
 	return -EINVAL;
 }
-late_initcall(exynos_cpufreq_init);
+
+static struct platform_driver exynos_cpufreq_platdrv = {
+	.driver = {
+		.name	= "exynos-cpufreq",
+		.owner	= THIS_MODULE,
+	},
+	.probe = exynos_cpufreq_probe,
+};
+module_platform_driver(exynos_cpufreq_platdrv);
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 8feda86..86fb1a1 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -102,12 +102,12 @@ static void set_clkdiv(unsigned int div_index)
 		cpu_relax();
 }
 
-static void set_apll(unsigned int new_index,
-			     unsigned int old_index)
+static void set_apll(unsigned int index)
 {
-	unsigned int tmp, pdiv;
+	unsigned int tmp;
+	unsigned int freq = apll_freq_5250[index].freq;
 
-	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+	/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
 	clk_set_parent(moutcore, mout_mpll);
 
 	do {
@@ -116,24 +116,9 @@ static void set_apll(unsigned int new_index,
 		tmp &= 0x7;
 	} while (tmp != 0x2);
 
-	/* 2. Set APLL Lock time */
-	pdiv = ((apll_freq_5250[new_index].mps >> 8) & 0x3f);
-
-	__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
+	clk_set_rate(mout_apll, freq * 1000);
 
-	/* 3. Change PLL PMS values */
-	tmp = __raw_readl(EXYNOS5_APLL_CON0);
-	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
-	tmp |= apll_freq_5250[new_index].mps;
-	__raw_writel(tmp, EXYNOS5_APLL_CON0);
-
-	/* 4. wait_lock_time */
-	do {
-		cpu_relax();
-		tmp = __raw_readl(EXYNOS5_APLL_CON0);
-	} while (!(tmp & (0x1 << 29)));
-
-	/* 5. MUX_CORE_SEL = APLL */
+	/* MUX_CORE_SEL = APLL */
 	clk_set_parent(moutcore, mout_apll);
 
 	do {
@@ -141,55 +126,17 @@ static void set_apll(unsigned int new_index,
 		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
 		tmp &= (0x7 << 16);
 	} while (tmp != (0x1 << 16));
-
-}
-
-static bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
-{
-	unsigned int old_pm = apll_freq_5250[old_index].mps >> 8;
-	unsigned int new_pm = apll_freq_5250[new_index].mps >> 8;
-
-	return (old_pm == new_pm) ? 0 : 1;
 }
 
 static void exynos5250_set_frequency(unsigned int old_index,
 				  unsigned int new_index)
 {
-	unsigned int tmp;
-
 	if (old_index > new_index) {
-		if (!exynos5250_pms_change(old_index, new_index)) {
-			/* 1. Change the system clock divider values */
-			set_clkdiv(new_index);
-			/* 2. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(EXYNOS5_APLL_CON0);
-			tmp &= ~(0x7 << 0);
-			tmp |= apll_freq_5250[new_index].mps & 0x7;
-			__raw_writel(tmp, EXYNOS5_APLL_CON0);
-
-		} else {
-			/* Clock Configuration Procedure */
-			/* 1. Change the system clock divider values */
-			set_clkdiv(new_index);
-			/* 2. Change the apll m,p,s value */
-			set_apll(new_index, old_index);
-		}
+		set_clkdiv(new_index);
+		set_apll(new_index);
 	} else if (old_index < new_index) {
-		if (!exynos5250_pms_change(old_index, new_index)) {
-			/* 1. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(EXYNOS5_APLL_CON0);
-			tmp &= ~(0x7 << 0);
-			tmp |= apll_freq_5250[new_index].mps & 0x7;
-			__raw_writel(tmp, EXYNOS5_APLL_CON0);
-			/* 2. Change the system clock divider values */
-			set_clkdiv(new_index);
-		} else {
-			/* Clock Configuration Procedure */
-			/* 1. Change the apll m,p,s value */
-			set_apll(new_index, old_index);
-			/* 2. Change the system clock divider values */
-			set_clkdiv(new_index);
-		}
+		set_apll(new_index);
+		set_clkdiv(new_index);
 	}
 }
 
@@ -222,7 +169,6 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 	info->volt_table = exynos5250_volt_table;
 	info->freq_table = exynos5250_freq_table;
 	info->set_freq = exynos5250_set_frequency;
-	info->need_apll_change = exynos5250_pms_change;
 
 	return 0;
 
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index 76bef8b..ffe6fae 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -312,7 +312,8 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver exynos_driver = {
-	.flags		= CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION |
+				CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= exynos_target,
 	.get		= exynos_getspeed,
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 3458d27..a8ac042 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -178,7 +178,29 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 }
 EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target);
 
+int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
+		unsigned int freq)
+{
+	struct cpufreq_frequency_table *table;
+	int i;
+
+	table = cpufreq_frequency_get_table(policy->cpu);
+	if (unlikely(!table)) {
+		pr_debug("%s: Unable to find frequency table\n", __func__);
+		return -ENOENT;
+	}
+
+	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if (table[i].frequency == freq)
+			return i;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index);
+
 static DEFINE_PER_CPU(struct cpufreq_frequency_table *, cpufreq_show_table);
+
 /**
  * show_available_freqs - show available frequencies for the specified CPU
  */
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 4b3f18e..2938257 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -35,6 +35,9 @@ static struct device *cpu_dev;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int transition_latency;
 
+static u32 *imx6_soc_volt;
+static u32 soc_opp_count;
+
 static unsigned int imx6q_get_speed(unsigned int cpu)
 {
 	return clk_get_rate(arm_clk) / 1000;
@@ -69,23 +72,22 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 
 	/* scaling up?  scale voltage before frequency */
 	if (new_freq > old_freq) {
+		ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
+			return ret;
+		}
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
+			return ret;
+		}
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_err(cpu_dev,
 				"failed to scale vddarm up: %d\n", ret);
 			return ret;
 		}
-
-		/*
-		 * Need to increase vddpu and vddsoc for safety
-		 * if we are about to run at 1.2 GHz.
-		 */
-		if (new_freq == FREQ_1P2_GHZ / 1000) {
-			regulator_set_voltage_tol(pu_reg,
-					PU_SOC_VOLTAGE_HIGH, 0);
-			regulator_set_voltage_tol(soc_reg,
-					PU_SOC_VOLTAGE_HIGH, 0);
-		}
 	}
 
 	/*
@@ -120,12 +122,15 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 				 "failed to scale vddarm down: %d\n", ret);
 			ret = 0;
 		}
-
-		if (old_freq == FREQ_1P2_GHZ / 1000) {
-			regulator_set_voltage_tol(pu_reg,
-					PU_SOC_VOLTAGE_NORMAL, 0);
-			regulator_set_voltage_tol(soc_reg,
-					PU_SOC_VOLTAGE_NORMAL, 0);
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
+			ret = 0;
+		}
+		ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
+			ret = 0;
 		}
 	}
 
@@ -138,6 +143,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver imx6q_cpufreq_driver = {
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = imx6q_get_speed,
@@ -153,6 +159,9 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	struct dev_pm_opp *opp;
 	unsigned long min_volt, max_volt;
 	int num, ret;
+	const struct property *prop;
+	const __be32 *val;
+	u32 nr, i, j;
 
 	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
@@ -187,12 +196,25 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_node;
 	}
 
-	/* We expect an OPP table supplied by platform */
+	/*
+	 * We expect an OPP table supplied by platform.
+	 * Just, incase the platform did not supply the OPP
+	 * table, it will try to get it.
+	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
-		ret = num;
-		dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
-		goto put_node;
+		ret = of_init_opp_table(cpu_dev);
+		if (ret < 0) {
+			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
+			goto put_node;
+		}
+
+		num = dev_pm_opp_get_opp_count(cpu_dev);
+		if (num < 0) {
+			ret = num;
+			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
+			goto put_node;
+		}
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
@@ -201,10 +223,62 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_node;
 	}
 
+	/* Make imx6_soc_volt array's size same as arm opp number */
+	imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL);
+	if (imx6_soc_volt == NULL) {
+		ret = -ENOMEM;
+		goto free_freq_table;
+	}
+
+	prop = of_find_property(np, "fsl,soc-operating-points", NULL);
+	if (!prop || !prop->value)
+		goto soc_opp_out;
+
+	/*
+	 * Each OPP is a set of tuples consisting of frequency and
+	 * voltage like <freq-kHz vol-uV>.
+	 */
+	nr = prop->length / sizeof(u32);
+	if (nr % 2 || (nr / 2) < num)
+		goto soc_opp_out;
+
+	for (j = 0; j < num; j++) {
+		val = prop->value;
+		for (i = 0; i < nr / 2; i++) {
+			unsigned long freq = be32_to_cpup(val++);
+			unsigned long volt = be32_to_cpup(val++);
+			if (freq_table[j].frequency == freq) {
+				imx6_soc_volt[soc_opp_count++] = volt;
+				break;
+			}
+		}
+	}
+
+soc_opp_out:
+	/* use fixed soc opp volt if no valid soc opp info found in dtb */
+	if (soc_opp_count != num) {
+		dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
+		for (j = 0; j < num; j++)
+			imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
+		if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
+			imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
+	}
+
 	if (of_property_read_u32(np, "clock-latency", &transition_latency))
 		transition_latency = CPUFREQ_ETERNAL;
 
 	/*
+	 * Calculate the ramp time for max voltage change in the
+	 * VDDSOC and VDDPU regulators.
+	 */
+	ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+	ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+
+	/*
 	 * OPP is maintained in order of increasing frequency, and
 	 * freq_table initialised from OPP is therefore sorted in the
 	 * same order.
@@ -221,18 +295,6 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	if (ret > 0)
 		transition_latency += ret * 1000;
 
-	/* Count vddpu and vddsoc latency in for 1.2 GHz support */
-	if (freq_table[num].frequency == FREQ_1P2_GHZ / 1000) {
-		ret = regulator_set_voltage_time(pu_reg, PU_SOC_VOLTAGE_NORMAL,
-						 PU_SOC_VOLTAGE_HIGH);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-		ret = regulator_set_voltage_time(soc_reg, PU_SOC_VOLTAGE_NORMAL,
-						 PU_SOC_VOLTAGE_HIGH);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
-
 	ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
 	if (ret) {
 		dev_err(cpu_dev, "failed register driver: %d\n", ret);
diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c
index 7d8ab000d..0e27844 100644
--- a/drivers/cpufreq/integrator-cpufreq.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -190,6 +190,7 @@ static int integrator_cpufreq_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver integrator_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= integrator_verify_policy,
 	.target		= integrator_set_target,
 	.get		= integrator_get,
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index d51f17ed..fe91dad 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -35,6 +35,7 @@
 #define SAMPLE_COUNT		3
 
 #define BYT_RATIOS	0x66a
+#define BYT_VIDS        0x66b
 
 #define FRAC_BITS 8
 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
@@ -64,6 +65,12 @@ struct pstate_data {
 	int	turbo_pstate;
 };
 
+struct vid_data {
+	int32_t min;
+	int32_t max;
+	int32_t ratio;
+};
+
 struct _pid {
 	int setpoint;
 	int32_t integral;
@@ -82,10 +89,9 @@ struct cpudata {
 	struct timer_list timer;
 
 	struct pstate_data pstate;
+	struct vid_data vid;
 	struct _pid pid;
 
-	int min_pstate_count;
-
 	u64	prev_aperf;
 	u64	prev_mperf;
 	int	sample_ptr;
@@ -106,7 +112,8 @@ struct pstate_funcs {
 	int (*get_max)(void);
 	int (*get_min)(void);
 	int (*get_turbo)(void);
-	void (*set)(int pstate);
+	void (*set)(struct cpudata*, int pstate);
+	void (*get_vid)(struct cpudata *);
 };
 
 struct cpu_defaults {
@@ -358,6 +365,42 @@ static int byt_get_max_pstate(void)
 	return (value >> 16) & 0xFF;
 }
 
+static void byt_set_pstate(struct cpudata *cpudata, int pstate)
+{
+	u64 val;
+	int32_t vid_fp;
+	u32 vid;
+
+	val = pstate << 8;
+	if (limits.no_turbo)
+		val |= (u64)1 << 32;
+
+	vid_fp = cpudata->vid.min + mul_fp(
+		int_tofp(pstate - cpudata->pstate.min_pstate),
+		cpudata->vid.ratio);
+
+	vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max);
+	vid = fp_toint(vid_fp);
+
+	val |= vid;
+
+	wrmsrl(MSR_IA32_PERF_CTL, val);
+}
+
+static void byt_get_vid(struct cpudata *cpudata)
+{
+	u64 value;
+
+	rdmsrl(BYT_VIDS, value);
+	cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
+	cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
+	cpudata->vid.ratio = div_fp(
+		cpudata->vid.max - cpudata->vid.min,
+		int_tofp(cpudata->pstate.max_pstate -
+			cpudata->pstate.min_pstate));
+}
+
+
 static int core_get_min_pstate(void)
 {
 	u64 value;
@@ -384,7 +427,7 @@ static int core_get_turbo_pstate(void)
 	return ret;
 }
 
-static void core_set_pstate(int pstate)
+static void core_set_pstate(struct cpudata *cpudata, int pstate)
 {
 	u64 val;
 
@@ -425,7 +468,8 @@ static struct cpu_defaults byt_params = {
 		.get_max = byt_get_max_pstate,
 		.get_min = byt_get_min_pstate,
 		.get_turbo = byt_get_max_pstate,
-		.set = core_set_pstate,
+		.set = byt_set_pstate,
+		.get_vid = byt_get_vid,
 	},
 };
 
@@ -462,7 +506,7 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
 
 	cpu->pstate.current_pstate = pstate;
 
-	pstate_funcs.set(pstate);
+	pstate_funcs.set(cpu, pstate);
 }
 
 static inline void intel_pstate_pstate_increase(struct cpudata *cpu, int steps)
@@ -488,6 +532,9 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 	cpu->pstate.max_pstate = pstate_funcs.get_max();
 	cpu->pstate.turbo_pstate = pstate_funcs.get_turbo();
 
+	if (pstate_funcs.get_vid)
+		pstate_funcs.get_vid(cpu);
+
 	/*
 	 * goto max pstate so we don't slow up boot if we are built-in if we are
 	 * a module we will take care of it during normal operation
@@ -568,15 +615,6 @@ static void intel_pstate_timer_func(unsigned long __data)
 
 	intel_pstate_sample(cpu);
 	intel_pstate_adjust_busy_pstate(cpu);
-
-	if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) {
-		cpu->min_pstate_count++;
-		if (!(cpu->min_pstate_count % 5)) {
-			intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate);
-		}
-	} else
-		cpu->min_pstate_count = 0;
-
 	intel_pstate_set_sample_time(cpu);
 }
 
@@ -782,6 +820,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
 	pstate_funcs.get_min   = funcs->get_min;
 	pstate_funcs.get_turbo = funcs->get_turbo;
 	pstate_funcs.set       = funcs->set;
+	pstate_funcs.get_vid   = funcs->get_vid;
 }
 
 #if IS_ENABLED(CONFIG_ACPI)
diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index 0767a4e..eb7abe3 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -97,6 +97,7 @@ static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver kirkwood_cpufreq_driver = {
+	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.get	= kirkwood_cpufreq_get_cpu_frequency,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.target_index = kirkwood_cpufreq_target,
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index a0acd0b..5de1e5f 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -162,7 +162,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver omap_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= omap_target,
 	.get		= omap_getspeed,
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index e2b4f40..1c0f1067 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -213,6 +213,7 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy,
 		cpu, target_freq,
 		(pcch_virt_addr + pcc_cpu_data->input_offset));
 
+	freqs.old = policy->cur;
 	freqs.new = target_freq;
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
@@ -228,25 +229,20 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy,
 	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
 
 	status = ioread16(&pcch_hdr->status);
+	iowrite16(0, &pcch_hdr->status);
+
+	cpufreq_notify_post_transition(policy, &freqs, status != CMD_COMPLETE);
+	spin_unlock(&pcc_lock);
+
 	if (status != CMD_COMPLETE) {
 		pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
 			cpu, status);
-		goto cmd_incomplete;
+		return -EINVAL;
 	}
-	iowrite16(0, &pcch_hdr->status);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
-	spin_unlock(&pcc_lock);
 
 	return 0;
-
-cmd_incomplete:
-	freqs.new = freqs.old;
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	iowrite16(0, &pcch_hdr->status);
-	spin_unlock(&pcc_lock);
-	return -EINVAL;
 }
 
 static int pcc_get_offset(int cpu)
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index 643e795..b9a444e 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -26,41 +26,108 @@
 static unsigned int                     busfreq;   /* FSB, in 10 kHz */
 static unsigned int                     max_multiplier;
 
+static unsigned int			param_busfreq = 0;
+static unsigned int			param_max_multiplier = 0;
+
+module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO);
+MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)");
+
+module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
 
 /* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
 static struct cpufreq_frequency_table clock_ratio[] = {
-	{45,  /* 000 -> 4.5x */ 0},
+	{60,  /* 110 -> 6.0x */ 0},
+	{55,  /* 011 -> 5.5x */ 0},
 	{50,  /* 001 -> 5.0x */ 0},
+	{45,  /* 000 -> 4.5x */ 0},
 	{40,  /* 010 -> 4.0x */ 0},
-	{55,  /* 011 -> 5.5x */ 0},
-	{20,  /* 100 -> 2.0x */ 0},
-	{30,  /* 101 -> 3.0x */ 0},
-	{60,  /* 110 -> 6.0x */ 0},
 	{35,  /* 111 -> 3.5x */ 0},
+	{30,  /* 101 -> 3.0x */ 0},
+	{20,  /* 100 -> 2.0x */ 0},
 	{0, CPUFREQ_TABLE_END}
 };
 
+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
+static const struct {
+	unsigned freq;
+	unsigned mult;
+} usual_frequency_table[] = {
+	{ 400000, 40 },	// 100   * 4
+	{ 450000, 45 }, // 100   * 4.5
+	{ 475000, 50 }, //  95   * 5
+	{ 500000, 50 }, // 100   * 5
+	{ 506250, 45 }, // 112.5 * 4.5
+	{ 533500, 55 }, //  97   * 5.5
+	{ 550000, 55 }, // 100   * 5.5
+	{ 562500, 50 }, // 112.5 * 5
+	{ 570000, 60 }, //  95   * 6
+	{ 600000, 60 }, // 100   * 6
+	{ 618750, 55 }, // 112.5 * 5.5
+	{ 660000, 55 }, // 120   * 5.5
+	{ 675000, 60 }, // 112.5 * 6
+	{ 720000, 60 }, // 120   * 6
+};
+
+#define FREQ_RANGE		3000
 
 /**
  * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
  *
- *   Returns the current setting of the frequency multiplier. Core clock
+ * Returns the current setting of the frequency multiplier. Core clock
  * speed is frequency of the Front-Side Bus multiplied with this value.
  */
 static int powernow_k6_get_cpu_multiplier(void)
 {
-	u64 invalue = 0;
+	unsigned long invalue = 0;
 	u32 msrval;
 
+	local_irq_disable();
+
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
 	invalue = inl(POWERNOW_IOPORT + 0x8);
 	msrval = POWERNOW_IOPORT + 0x0;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
 
-	return clock_ratio[(invalue >> 5)&7].driver_data;
+	local_irq_enable();
+
+	return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
 }
 
+static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
+{
+	unsigned long outvalue, invalue;
+	unsigned long msrval;
+	unsigned long cr0;
+
+	/* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+	/*
+	 * The processor doesn't respond to inquiry cycles while changing the
+	 * frequency, so we must disable cache.
+	 */
+	local_irq_disable();
+	cr0 = read_cr0();
+	write_cr0(cr0 | X86_CR0_CD);
+	wbinvd();
+
+	outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue = inl(POWERNOW_IOPORT + 0x8);
+	invalue = invalue & 0x1f;
+	outvalue = outvalue | invalue;
+	outl(outvalue, (POWERNOW_IOPORT + 0x8));
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	write_cr0(cr0);
+	local_irq_enable();
+}
 
 /**
  * powernow_k6_target - set the PowerNow! multiplier
@@ -71,8 +138,6 @@ static int powernow_k6_get_cpu_multiplier(void)
 static int powernow_k6_target(struct cpufreq_policy *policy,
 		unsigned int best_i)
 {
-	unsigned long outvalue = 0, invalue = 0;
-	unsigned long msrval;
 	struct cpufreq_freqs freqs;
 
 	if (clock_ratio[best_i].driver_data > max_multiplier) {
@@ -85,35 +150,63 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
-	/* we now need to transform best_i to the BVC format, see AMD#23446 */
-
-	outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
-
-	msrval = POWERNOW_IOPORT + 0x1;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
-	invalue = inl(POWERNOW_IOPORT + 0x8);
-	invalue = invalue & 0xf;
-	outvalue = outvalue | invalue;
-	outl(outvalue , (POWERNOW_IOPORT + 0x8));
-	msrval = POWERNOW_IOPORT + 0x0;
-	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+	powernow_k6_set_cpu_multiplier(best_i);
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }
 
-
 static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int i, f;
+	unsigned khz;
 
 	if (policy->cpu != 0)
 		return -ENODEV;
 
-	/* get frequencies */
-	max_multiplier = powernow_k6_get_cpu_multiplier();
-	busfreq = cpu_khz / max_multiplier;
+	max_multiplier = 0;
+	khz = cpu_khz;
+	for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) {
+		if (khz >= usual_frequency_table[i].freq - FREQ_RANGE &&
+		    khz <= usual_frequency_table[i].freq + FREQ_RANGE) {
+			khz = usual_frequency_table[i].freq;
+			max_multiplier = usual_frequency_table[i].mult;
+			break;
+		}
+	}
+	if (param_max_multiplier) {
+		for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+			if (clock_ratio[i].driver_data == param_max_multiplier) {
+				max_multiplier = param_max_multiplier;
+				goto have_max_multiplier;
+			}
+		}
+		printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+		return -EINVAL;
+	}
+
+	if (!max_multiplier) {
+		printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
+		printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+		return -EOPNOTSUPP;
+	}
+
+have_max_multiplier:
+	param_max_multiplier = max_multiplier;
+
+	if (param_busfreq) {
+		if (param_busfreq >= 50000 && param_busfreq <= 150000) {
+			busfreq = param_busfreq / 10;
+			goto have_busfreq;
+		}
+		printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+		return -EINVAL;
+	}
+
+	busfreq = khz / max_multiplier;
+have_busfreq:
+	param_busfreq = busfreq * 10;
 
 	/* table init */
 	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
@@ -125,7 +218,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 200000;
+	policy->cpuinfo.transition_latency = 500000;
 
 	return cpufreq_table_validate_and_show(policy, clock_ratio);
 }
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 0023c7d..e10b646 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -964,14 +964,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 	cpufreq_cpu_put(policy);
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	res = transition_fid_vid(data, fid, vid);
-	if (res)
-		freqs.new = freqs.old;
-	else
-		freqs.new = find_khz_freq_from_fid(data->currfid);
+	cpufreq_notify_post_transition(policy, &freqs, res);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	return res;
 }
 
diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c
index 0a0f436..a9195a8 100644
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -423,6 +423,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver pxa_cpufreq_driver = {
+	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.target_index = pxa_set_target,
 	.init	= pxa_cpufreq_init,
diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c
index 9384004..3785687 100644
--- a/drivers/cpufreq/pxa3xx-cpufreq.c
+++ b/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -201,6 +201,7 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= pxa3xx_cpufreq_set,
 	.init		= pxa3xx_cpufreq_init,
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index 8d904a0..826b8be 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -481,7 +481,7 @@ err_hclk:
 }
 
 static struct cpufreq_driver s3c2416_cpufreq_driver = {
-	.flags          = 0,
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= s3c2416_cpufreq_set_target,
 	.get		= s3c2416_cpufreq_get_speed,
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 72b2cc8..f84ed10 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -22,8 +22,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -55,7 +53,7 @@ static inline int within_khz(unsigned long a, unsigned long b)
  * specified in @cfg. The values are stored in @cfg for later use
  * by the relevant set routine if the request settings can be reached.
  */
-int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 {
 	unsigned int hdiv, pdiv;
 	unsigned long hclk, fclk, armclk;
@@ -242,7 +240,7 @@ static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
 	return ret;
 }
 
-struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+static struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.max		= {
 		.fclk	= 400000000,
 		.hclk	= 133333333,
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 4850882..6a1bf96 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -448,7 +448,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 #endif
 
 static struct cpufreq_driver s3c24xx_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.target		= s3c_cpufreq_target,
 	.get		= s3c_cpufreq_get,
 	.init		= s3c_cpufreq_init,
@@ -509,7 +509,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 	return 0;
 }
 
-int __init s3c_cpufreq_auto_io(void)
+static int __init s3c_cpufreq_auto_io(void)
 {
 	int ret;
 
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 67e302e..8435f45 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -226,7 +226,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
-	.flags          = 0,
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= s3c64xx_cpufreq_set_target,
 	.get		= s3c64xx_cpufreq_get_speed,
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index e3973da..ccd548c 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -560,7 +560,7 @@ static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
 }
 
 static struct cpufreq_driver s5pv210_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= s5pv210_target,
 	.get		= s5pv210_getspeed,
diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c
index 623da74..728eab7 100644
--- a/drivers/cpufreq/sa1100-cpufreq.c
+++ b/drivers/cpufreq/sa1100-cpufreq.c
@@ -201,7 +201,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver sa1100_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= sa1100_target,
 	.get		= sa11x0_getspeed,
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 2c2b2e6..5463767 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -312,7 +312,7 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
 /* sa1110_driver needs __refdata because it must remain after init registers
  * it with cpufreq_register_driver() */
 static struct cpufreq_driver sa1110_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= sa1110_target,
 	.get		= sa11x0_getspeed,
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
index d02ccd1..c7525fe 100644
--- a/drivers/cpufreq/spear-cpufreq.c
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -138,7 +138,7 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy,
 	}
 
 	newfreq = clk_round_rate(srcclk, newfreq * mult);
-	if (newfreq < 0) {
+	if (newfreq <= 0) {
 		pr_err("clk_round_rate failed for cpu src clock\n");
 		return newfreq;
 	}
@@ -162,7 +162,7 @@ static int spear_cpufreq_init(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver spear_cpufreq_driver = {
 	.name		= "cpufreq-spear",
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= spear_cpufreq_target,
 	.get		= spear_cpufreq_get,
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index b7309c3..01b5578 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -214,6 +214,7 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver tegra_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= tegra_target,
 	.get		= tegra_getspeed,
diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c
index 653ae29..86f6cfe 100644
--- a/drivers/cpufreq/unicore2-cpufreq.c
+++ b/drivers/cpufreq/unicore2-cpufreq.c
@@ -46,20 +46,18 @@ static int ucv2_target(struct cpufreq_policy *policy,
 			 unsigned int target_freq,
 			 unsigned int relation)
 {
-	unsigned int cur = ucv2_getspeed(0);
 	struct cpufreq_freqs freqs;
 	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
+	int ret;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	if (!clk_set_rate(mclk, target_freq * 1000)) {
-		freqs.old = cur;
-		freqs.new = target_freq;
-	}
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	ret = clk_set_rate(mclk, target_freq * 1000);
+	cpufreq_notify_post_transition(policy, &freqs, ret);
 
-	return 0;
+	return ret;
 }
 
 static int __init ucv2_cpu_init(struct cpufreq_policy *policy)