summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorAlexey Starikovskiy <alexey_y_starikovskiy@linux.intel.com>2006-07-31 22:28:12 +0400
committerDave Jones <davej@redhat.com>2006-08-11 17:59:57 -0400
commit05ca0350e8caa91a5ec9961c585c98005b6934ea (patch)
tree16eb1080f5db361dcd18821f7204b8edf5ffb698 /drivers/cpufreq
parent1ce28d6b19112a7c76af8e971e2de3109d19a943 (diff)
downloadop-kernel-dev-05ca0350e8caa91a5ec9961c585c98005b6934ea.zip
op-kernel-dev-05ca0350e8caa91a5ec9961c585c98005b6934ea.tar.gz
[CPUFREQ][2/2] ondemand: updated add powersave_bias tunable
ondemand selects the minimum frequency that can retire a workload with negligible idle time -- ideally resulting in the highest performance/power efficiency with negligible performance impact. But on some systems and some workloads, this algorithm is more performance biased than necessary, and de-tuning it a bit to allow some performance impact can save measurable power. This patch adds a "powersave_bias" tunable to ondemand to allow it to reduce its target frequency by a specified percent. By default, the powersave_bias is 0 and has no effect. powersave_bias is in units of 0.1%, so it has an effective range of 1 through 1000, resulting in 0.1% to 100% impact. In practice, users will not be able to detect a difference between 0.1% increments, but 1.0% increments turned out to be too large. Also, the max value of 1000 (100%) would simply peg the system in its deepest power saving P-state, unless the processor really has a hardware P-state at 0Hz:-) For example, If ondemand requests 2.0GHz based on utilization, and powersave_bias=100, this code will knock 10% off the target and seek a target of 1.8GHz instead of 2.0GHz until the next sampling. If 1.8 is an exact match with an hardware frequency we use it, otherwise we average our time between the frequency next higher than 1.8 and next lower than 1.8. Note that a user or administrative program can change powersave_bias at run-time depending on how they expect the system to be used. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi at intel.com> Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy at intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c157
1 files changed, 140 insertions, 17 deletions
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index f507a86..34874c2 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -55,6 +55,10 @@ struct cpu_dbs_info_s {
struct cpufreq_policy *cur_policy;
struct work_struct work;
unsigned int enable;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int freq_lo;
+ unsigned int freq_lo_jiffies;
+ unsigned int freq_hi_jiffies;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
@@ -72,15 +76,15 @@ static DEFINE_MUTEX(dbs_mutex);
static struct workqueue_struct *kondemand_wq;
-struct dbs_tuners {
+static struct dbs_tuners {
unsigned int sampling_rate;
unsigned int up_threshold;
unsigned int ignore_nice;
-};
-
-static struct dbs_tuners dbs_tuners_ins = {
+ unsigned int powersave_bias;
+} dbs_tuners_ins = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.ignore_nice = 0,
+ .powersave_bias = 0,
};
static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
@@ -96,6 +100,69 @@ static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
return retval;
}
+/*
+ * Find right freq to be set now with powersave_bias on.
+ * Returns the freq_hi to be used right now and will set freq_hi_jiffies,
+ * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
+ */
+unsigned int powersave_bias_target(struct cpufreq_policy *policy,
+ unsigned int freq_next, unsigned int relation)
+{
+ unsigned int freq_req, freq_reduc, freq_avg;
+ unsigned int freq_hi, freq_lo;
+ unsigned int index = 0;
+ unsigned int jiffies_total, jiffies_hi, jiffies_lo;
+ struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, policy->cpu);
+
+ if (!dbs_info->freq_table) {
+ dbs_info->freq_lo = 0;
+ dbs_info->freq_lo_jiffies = 0;
+ return freq_next;
+ }
+
+ cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
+ relation, &index);
+ freq_req = dbs_info->freq_table[index].frequency;
+ freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
+ freq_avg = freq_req - freq_reduc;
+
+ /* Find freq bounds for freq_avg in freq_table */
+ index = 0;
+ cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg,
+ CPUFREQ_RELATION_H, &index);
+ freq_lo = dbs_info->freq_table[index].frequency;
+ index = 0;
+ cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg,
+ CPUFREQ_RELATION_L, &index);
+ freq_hi = dbs_info->freq_table[index].frequency;
+
+ /* Find out how long we have to be in hi and lo freqs */
+ if (freq_hi == freq_lo) {
+ dbs_info->freq_lo = 0;
+ dbs_info->freq_lo_jiffies = 0;
+ return freq_lo;
+ }
+ jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+ jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
+ jiffies_hi += ((freq_hi - freq_lo) / 2);
+ jiffies_hi /= (freq_hi - freq_lo);
+ jiffies_lo = jiffies_total - jiffies_hi;
+ dbs_info->freq_lo = freq_lo;
+ dbs_info->freq_lo_jiffies = jiffies_lo;
+ dbs_info->freq_hi_jiffies = jiffies_hi;
+ return freq_hi;
+}
+
+static void ondemand_powersave_bias_init(void)
+{
+ int i;
+ for_each_online_cpu(i) {
+ struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
+ dbs_info->freq_table = cpufreq_frequency_get_table(i);
+ dbs_info->freq_lo = 0;
+ }
+}
+
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
{
@@ -124,6 +191,7 @@ static ssize_t show_##file_name \
show_one(sampling_rate, sampling_rate);
show_one(up_threshold, up_threshold);
show_one(ignore_nice_load, ignore_nice);
+show_one(powersave_bias, powersave_bias);
static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
const char *buf, size_t count)
@@ -198,6 +266,27 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
return count;
}
+static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf(buf, "%u", &input);
+
+ if (ret != 1)
+ return -EINVAL;
+
+ if (input > 1000)
+ input = 1000;
+
+ mutex_lock(&dbs_mutex);
+ dbs_tuners_ins.powersave_bias = input;
+ ondemand_powersave_bias_init();
+ mutex_unlock(&dbs_mutex);
+
+ return count;
+}
+
#define define_one_rw(_name) \
static struct freq_attr _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
@@ -205,6 +294,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name)
define_one_rw(sampling_rate);
define_one_rw(up_threshold);
define_one_rw(ignore_nice_load);
+define_one_rw(powersave_bias);
static struct attribute * dbs_attributes[] = {
&sampling_rate_max.attr,
@@ -212,6 +302,7 @@ static struct attribute * dbs_attributes[] = {
&sampling_rate.attr,
&up_threshold.attr,
&ignore_nice_load.attr,
+ &powersave_bias.attr,
NULL
};
@@ -234,6 +325,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
if (!this_dbs_info->enable)
return;
+ this_dbs_info->freq_lo = 0;
policy = this_dbs_info->cur_policy;
cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
total_ticks = (unsigned int) cputime64_sub(cur_jiffies,
@@ -274,11 +366,18 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
/* Check for frequency increase */
if (load > dbs_tuners_ins.up_threshold) {
/* if we are already at full speed then break out early */
- if (policy->cur == policy->max)
- return;
-
- __cpufreq_driver_target(policy, policy->max,
- CPUFREQ_RELATION_H);
+ if (!dbs_tuners_ins.powersave_bias) {
+ if (policy->cur == policy->max)
+ return;
+
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ } else {
+ int freq = powersave_bias_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ __cpufreq_driver_target(policy, freq,
+ CPUFREQ_RELATION_L);
+ }
return;
}
@@ -293,14 +392,23 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
- unsigned int freq_next;
- freq_next = (policy->cur * load) /
+ unsigned int freq_next = (policy->cur * load) /
(dbs_tuners_ins.up_threshold - 10);
-
- __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L);
+ if (!dbs_tuners_ins.powersave_bias) {
+ __cpufreq_driver_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ } else {
+ int freq = powersave_bias_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ __cpufreq_driver_target(policy, freq,
+ CPUFREQ_RELATION_L);
+ }
}
}
+/* Sampling types */
+enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
+
static void do_dbs_timer(void *data)
{
unsigned int cpu = smp_processor_id();
@@ -311,10 +419,24 @@ static void do_dbs_timer(void *data)
if (!dbs_info->enable)
return;
-
- lock_cpu_hotplug();
- dbs_check_cpu(dbs_info);
- unlock_cpu_hotplug();
+ /* Common NORMAL_SAMPLE setup */
+ INIT_WORK(&dbs_info->work, do_dbs_timer, (void *)DBS_NORMAL_SAMPLE);
+ if (!dbs_tuners_ins.powersave_bias ||
+ (unsigned long) data == DBS_NORMAL_SAMPLE) {
+ lock_cpu_hotplug();
+ dbs_check_cpu(dbs_info);
+ unlock_cpu_hotplug();
+ if (dbs_info->freq_lo) {
+ /* Setup timer for SUB_SAMPLE */
+ INIT_WORK(&dbs_info->work, do_dbs_timer,
+ (void *)DBS_SUB_SAMPLE);
+ delay = dbs_info->freq_hi_jiffies;
+ }
+ } else {
+ __cpufreq_driver_target(dbs_info->cur_policy,
+ dbs_info->freq_lo,
+ CPUFREQ_RELATION_H);
+ }
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
}
@@ -325,6 +447,7 @@ static inline void dbs_timer_init(unsigned int cpu)
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
+ ondemand_powersave_bias_init();
INIT_WORK(&dbs_info->work, do_dbs_timer, 0);
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
}
OpenPOWER on IntegriCloud