Merge branch 'pm-cpufreq'

* pm-cpufreq: (33 commits)
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpufreq: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  cpufreq: dbx500: Delete obsolete driver
  mfd: db8500-prcmu: Get rid of cpufreq dependency
  cpufreq: enable the DT cpufreq driver on the Ux500
  cpufreq: Loongson2: constify platform_device_id
  cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
  cpufreq: remove setting of policy->cpu in policy->cpus during init
  cpufreq: mediatek: add support of cpufreq to MT7622 SoC
  cpufreq: mediatek: add cleanups with the more generic naming
  cpufreq: rcar: Add support for R8A7795 SoC
  cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
  cpufreq: s5pv210: add missing of_node_put()
  cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
  ...

32 files changed, 189 insertions, 224 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 2011fec..bdce448 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -71,15 +71,6 @@ config ARM_HIGHBANK_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_DB8500_CPUFREQ
-	tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
-	default ARCH_U8500
-	depends on HAS_IOMEM
-	depends on !CPU_THERMAL || THERMAL
-	help
-	  This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
-	  series.
-
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC
@@ -96,14 +87,13 @@ config ARM_KIRKWOOD_CPUFREQ
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
 
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
 	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
@@ -242,6 +232,11 @@ config ARM_STI_CPUFREQ
 	  this config option if you wish to add CPUFreq support for STi based
 	  SoCs.
 
+config ARM_TANGO_CPUFREQ
+	bool
+	depends on CPUFREQ_DT && ARCH_TANGO
+	default y
+
 config ARM_TEGRA20_CPUFREQ
 	bool "Tegra20 CPUFreq support"
 	depends on ARCH_TEGRA
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ab3a42c..c7af9b2 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,12 +53,11 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
-obj-$(CONFIG_ARM_DB8500_CPUFREQ)	+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
@@ -75,6 +74,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index ea6d625..1750412 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -483,11 +483,8 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 	}
 
-	if (arm_bL_ops->get_transition_latency)
-		policy->cpuinfo.transition_latency =
-			arm_bL_ops->get_transition_latency(cpu_dev);
-	else
-		policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cpuinfo.transition_latency =
+				arm_bL_ops->get_transition_latency(cpu_dev);
 
 	if (is_bL_switching_enabled())
 		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
@@ -622,7 +619,8 @@ int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
 		return -EBUSY;
 	}
 
-	if (!ops || !strlen(ops->name) || !ops->init_opp_table) {
+	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
+	    !ops->get_transition_latency) {
 		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
 		return -ENODEV;
 	}
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 10be285..a1c3025 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -172,7 +172,6 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		return -EFAULT;
 	}
 
-	cpumask_set_cpu(policy->cpu, policy->cpus);
 	cpu->cur_policy = policy;
 
 	/* Set policy->cur to max now. The governors will adjust later. */
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 1c26292..a020da7 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -9,11 +9,16 @@
 
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include "cpufreq-dt.h"
 
-static const struct of_device_id machines[] __initconst = {
+/*
+ * Machines for which the cpufreq device is *always* created, mostly used for
+ * platforms using "operating-points" (V1) property.
+ */
+static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "allwinner,sun4i-a10", },
 	{ .compatible = "allwinner,sun5i-a10s", },
 	{ .compatible = "allwinner,sun5i-a13", },
@@ -22,7 +27,6 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "allwinner,sun6i-a31s", },
 	{ .compatible = "allwinner,sun7i-a20", },
 	{ .compatible = "allwinner,sun8i-a23", },
-	{ .compatible = "allwinner,sun8i-a33", },
 	{ .compatible = "allwinner,sun8i-a83t", },
 	{ .compatible = "allwinner,sun8i-h3", },
 
@@ -32,7 +36,6 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "arm,integrator-cp", },
 
 	{ .compatible = "hisilicon,hi3660", },
-	{ .compatible = "hisilicon,hi6220", },
 
 	{ .compatible = "fsl,imx27", },
 	{ .compatible = "fsl,imx51", },
@@ -46,11 +49,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "samsung,exynos3250", },
 	{ .compatible = "samsung,exynos4210", },
 	{ .compatible = "samsung,exynos4212", },
-	{ .compatible = "samsung,exynos4412", },
 	{ .compatible = "samsung,exynos5250", },
 #ifndef CONFIG_BL_SWITCHER
-	{ .compatible = "samsung,exynos5420", },
-	{ .compatible = "samsung,exynos5433", },
 	{ .compatible = "samsung,exynos5800", },
 #endif
 
@@ -67,6 +67,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "renesas,r8a7792", },
 	{ .compatible = "renesas,r8a7793", },
 	{ .compatible = "renesas,r8a7794", },
+	{ .compatible = "renesas,r8a7795", },
+	{ .compatible = "renesas,r8a7796", },
 	{ .compatible = "renesas,sh73a0", },
 
 	{ .compatible = "rockchip,rk2928", },
@@ -76,17 +78,17 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "rockchip,rk3188", },
 	{ .compatible = "rockchip,rk3228", },
 	{ .compatible = "rockchip,rk3288", },
+	{ .compatible = "rockchip,rk3328", },
 	{ .compatible = "rockchip,rk3366", },
 	{ .compatible = "rockchip,rk3368", },
 	{ .compatible = "rockchip,rk3399", },
 
-	{ .compatible = "sigma,tango4" },
-
-	{ .compatible = "socionext,uniphier-pro5", },
-	{ .compatible = "socionext,uniphier-pxs2", },
 	{ .compatible = "socionext,uniphier-ld6b", },
-	{ .compatible = "socionext,uniphier-ld11", },
-	{ .compatible = "socionext,uniphier-ld20", },
+
+	{ .compatible = "st-ericsson,u8500", },
+	{ .compatible = "st-ericsson,u8540", },
+	{ .compatible = "st-ericsson,u9500", },
+	{ .compatible = "st-ericsson,u9540", },
 
 	{ .compatible = "ti,omap2", },
 	{ .compatible = "ti,omap3", },
@@ -94,27 +96,56 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "ti,omap5", },
 
 	{ .compatible = "xlnx,zynq-7000", },
+	{ .compatible = "xlnx,zynqmp", },
 
-	{ .compatible = "zte,zx296718", },
+	{ }
+};
 
+/*
+ * Machines for which the cpufreq device is *not* created, mostly used for
+ * platforms using "operating-points-v2" property.
+ */
+static const struct of_device_id blacklist[] __initconst = {
 	{ }
 };
 
+static bool __init cpu0_node_has_opp_v2_prop(void)
+{
+	struct device_node *np = of_cpu_device_node_get(0);
+	bool ret = false;
+
+	if (of_get_property(np, "operating-points-v2", NULL))
+		ret = true;
+
+	of_node_put(np);
+	return ret;
+}
+
 static int __init cpufreq_dt_platdev_init(void)
 {
 	struct device_node *np = of_find_node_by_path("/");
 	const struct of_device_id *match;
+	const void *data = NULL;
 
 	if (!np)
 		return -ENODEV;
 
-	match = of_match_node(machines, np);
+	match = of_match_node(whitelist, np);
+	if (match) {
+		data = match->data;
+		goto create_pdev;
+	}
+
+	if (cpu0_node_has_opp_v2_prop() && !of_match_node(blacklist, np))
+		goto create_pdev;
+
 	of_node_put(np);
-	if (!match)
-		return -ENODEV;
+	return -ENODEV;
 
+create_pdev:
+	of_node_put(np);
 	return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt",
-			       -1, match->data,
+			       -1, data,
 			       sizeof(struct cpufreq_dt_platform_data)));
 }
 device_initcall(cpufreq_dt_platdev_init);
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index 5503d49..dbf82f3 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -357,7 +357,6 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* cpuinfo and default policy values */
 	policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100;
 	policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 
 	return 0;
 }
@@ -369,6 +368,7 @@ static int nforce2_cpu_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver nforce2_driver = {
 	.name = "nforce2",
+	.flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify = nforce2_verify,
 	.target = nforce2_target,
 	.get = nforce2_get,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9bf97a3..c7ae67d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -524,6 +524,32 @@ unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
 
+unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy)
+{
+	unsigned int latency;
+
+	if (policy->transition_delay_us)
+		return policy->transition_delay_us;
+
+	latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+	if (latency) {
+		/*
+		 * For platforms that can change the frequency very fast (< 10
+		 * us), the above formula gives a decent transition delay. But
+		 * for platforms where transition_latency is in milliseconds, it
+		 * ends up giving unrealistic values.
+		 *
+		 * Cap the default transition delay to 10 ms, which seems to be
+		 * a reasonable amount of time after which we should reevaluate
+		 * the frequency.
+		 */
+		return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000);
+	}
+
+	return LATENCY_MULTIPLIER;
+}
+EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us);
+
 /*********************************************************************
  *                          SYSFS INTERFACE                          *
  *********************************************************************/
@@ -1988,13 +2014,13 @@ static int cpufreq_init_governor(struct cpufreq_policy *policy)
 	if (!policy->governor)
 		return -EINVAL;
 
-	if (policy->governor->max_transition_latency &&
-	    policy->cpuinfo.transition_latency >
-	    policy->governor->max_transition_latency) {
+	/* Platform doesn't want dynamic frequency switching ? */
+	if (policy->governor->dynamic_switching &&
+	    cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) {
 		struct cpufreq_governor *gov = cpufreq_fallback_governor();
 
 		if (gov) {
-			pr_warn("%s governor failed, too long transition latency of HW, fallback to %s governor\n",
+			pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n",
 				policy->governor->name, gov->name);
 			policy->governor = gov;
 		} else {
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 88220ff..f20f20a 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -246,7 +246,6 @@ gov_show_one_common(sampling_rate);
 gov_show_one_common(sampling_down_factor);
 gov_show_one_common(up_threshold);
 gov_show_one_common(ignore_nice_load);
-gov_show_one_common(min_sampling_rate);
 gov_show_one(cs, down_threshold);
 gov_show_one(cs, freq_step);
 
@@ -254,12 +253,10 @@ gov_attr_rw(sampling_rate);
 gov_attr_rw(sampling_down_factor);
 gov_attr_rw(up_threshold);
 gov_attr_rw(ignore_nice_load);
-gov_attr_ro(min_sampling_rate);
 gov_attr_rw(down_threshold);
 gov_attr_rw(freq_step);
 
 static struct attribute *cs_attributes[] = {
-	&min_sampling_rate.attr,
 	&sampling_rate.attr,
 	&sampling_down_factor.attr,
 	&up_threshold.attr,
@@ -297,10 +294,7 @@ static int cs_init(struct dbs_data *dbs_data)
 	dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
 	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
 	dbs_data->ignore_nice_load = 0;
-
 	dbs_data->tuners = tuners;
-	dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
-		jiffies_to_usecs(10);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 47e24b5..eed069e 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -47,14 +47,11 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 {
 	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct policy_dbs_info *policy_dbs;
-	unsigned int rate;
 	int ret;
-	ret = sscanf(buf, "%u", &rate);
+	ret = sscanf(buf, "%u", &dbs_data->sampling_rate);
 	if (ret != 1)
 		return -EINVAL;
 
-	dbs_data->sampling_rate = max(rate, dbs_data->min_sampling_rate);
-
 	/*
 	 * We are operating under dbs_data->mutex and so the list and its
 	 * entries can't be freed concurrently.
@@ -392,7 +389,6 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy)
 	struct dbs_governor *gov = dbs_governor_of(policy);
 	struct dbs_data *dbs_data;
 	struct policy_dbs_info *policy_dbs;
-	unsigned int latency;
 	int ret = 0;
 
 	/* State should be equivalent to EXIT */
@@ -431,16 +427,7 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy)
 	if (ret)
 		goto free_policy_dbs_info;
 
-	/* policy latency is in ns. Convert it to us first */
-	latency = policy->cpuinfo.transition_latency / 1000;
-	if (latency == 0)
-		latency = 1;
-
-	/* Bring kernel and HW constraints together */
-	dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
-					  MIN_LATENCY_MULTIPLIER * latency);
-	dbs_data->sampling_rate = max(dbs_data->min_sampling_rate,
-				      LATENCY_MULTIPLIER * latency);
+	dbs_data->sampling_rate = cpufreq_policy_transition_delay_us(policy);
 
 	if (!have_governor_per_policy())
 		gov->gdbs_data = dbs_data;
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 0236ec2..8463f5d 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -41,7 +41,6 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
 struct dbs_data {
 	struct gov_attr_set attr_set;
 	void *tuners;
-	unsigned int min_sampling_rate;
 	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
@@ -160,7 +159,7 @@ void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy);
 #define CPUFREQ_DBS_GOVERNOR_INITIALIZER(_name_)			\
 	{								\
 		.name = _name_,						\
-		.max_transition_latency	= TRANSITION_LATENCY_LIMIT,	\
+		.dynamic_switching = true,				\
 		.owner = THIS_MODULE,					\
 		.init = cpufreq_dbs_governor_init,			\
 		.exit = cpufreq_dbs_governor_exit,			\
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 3937acf..6b423ee 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -319,7 +319,6 @@ gov_show_one_common(sampling_rate);
 gov_show_one_common(up_threshold);
 gov_show_one_common(sampling_down_factor);
 gov_show_one_common(ignore_nice_load);
-gov_show_one_common(min_sampling_rate);
 gov_show_one_common(io_is_busy);
 gov_show_one(od, powersave_bias);
 
@@ -329,10 +328,8 @@ gov_attr_rw(up_threshold);
 gov_attr_rw(sampling_down_factor);
 gov_attr_rw(ignore_nice_load);
 gov_attr_rw(powersave_bias);
-gov_attr_ro(min_sampling_rate);
 
 static struct attribute *od_attributes[] = {
-	&min_sampling_rate.attr,
 	&sampling_rate.attr,
 	&up_threshold.attr,
 	&sampling_down_factor.attr,
@@ -373,17 +370,8 @@ static int od_init(struct dbs_data *dbs_data)
 	if (idle_time != -1ULL) {
 		/* Idle micro accounting is supported. Use finer thresholds */
 		dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
-		/*
-		 * In nohz/micro accounting case we set the minimum frequency
-		 * not depending on HZ, but fixed (very low).
-		*/
-		dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
 	} else {
 		dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
-
-		/* For correct statistics, we need 10 ticks for each measure */
-		dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
-			jiffies_to_usecs(10);
 	}
 
 	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
deleted file mode 100644
index 4ee0431..0000000
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010-2012
- *
- * License Terms: GNU General Public License v2
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-static struct cpufreq_frequency_table *freq_table;
-static struct clk *armss_clk;
-static struct thermal_cooling_device *cdev;
-
-static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
-				unsigned int index)
-{
-	/* update armss clk frequency */
-	return clk_set_rate(armss_clk, freq_table[index].frequency * 1000);
-}
-
-static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
-{
-	policy->clk = armss_clk;
-	return cpufreq_generic_init(policy, freq_table, 20 * 1000);
-}
-
-static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	if (!IS_ERR(cdev))
-		cpufreq_cooling_unregister(cdev);
-	return 0;
-}
-
-static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	cdev = cpufreq_cooling_register(policy);
-	if (IS_ERR(cdev))
-		pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
-	else
-		pr_info("Cooling device registered: %s\n", cdev->type);
-}
-
-static struct cpufreq_driver dbx500_cpufreq_driver = {
-	.flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
-			CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify = cpufreq_generic_frequency_table_verify,
-	.target_index = dbx500_cpufreq_target,
-	.get    = cpufreq_generic_get,
-	.init   = dbx500_cpufreq_init,
-	.exit  = dbx500_cpufreq_exit,
-	.ready  = dbx500_cpufreq_ready,
-	.name   = "DBX500",
-	.attr   = cpufreq_generic_attr,
-};
-
-static int dbx500_cpufreq_probe(struct platform_device *pdev)
-{
-	struct cpufreq_frequency_table *pos;
-
-	freq_table = dev_get_platdata(&pdev->dev);
-	if (!freq_table) {
-		pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n");
-		return -ENODEV;
-	}
-
-	armss_clk = clk_get(&pdev->dev, "armss");
-	if (IS_ERR(armss_clk)) {
-		pr_err("dbx500-cpufreq: Failed to get armss clk\n");
-		return PTR_ERR(armss_clk);
-	}
-
-	pr_info("dbx500-cpufreq: Available frequencies:\n");
-	cpufreq_for_each_entry(pos, freq_table)
-		pr_info("  %d Mhz\n", pos->frequency / 1000);
-
-	return cpufreq_register_driver(&dbx500_cpufreq_driver);
-}
-
-static struct platform_driver dbx500_cpufreq_plat_driver = {
-	.driver = {
-		.name = "cpufreq-ux500",
-	},
-	.probe = dbx500_cpufreq_probe,
-};
-
-static int __init dbx500_cpufreq_register(void)
-{
-	return platform_driver_register(&dbx500_cpufreq_plat_driver);
-}
-device_initcall(dbx500_cpufreq_register);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("cpufreq driver for DBX500");
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index bfce11c..45e2ca6 100644
--- a/drivers/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
@@ -165,9 +165,6 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 		if (pos->frequency > max_freq)
 			pos->frequency = CPUFREQ_ENTRY_INVALID;
 
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
 	return cpufreq_table_validate_and_show(policy, elanfreq_table);
 }
 
@@ -196,6 +193,7 @@ __setup("elanfreq=", elanfreq_setup);
 
 static struct cpufreq_driver elanfreq_driver = {
 	.get		= elanfreq_get_cpu_frequency,
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= elanfreq_target,
 	.init		= elanfreq_cpu_init,
diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c
index 3488c9c..8f52a06 100644
--- a/drivers/cpufreq/gx-suspmod.c
+++ b/drivers/cpufreq/gx-suspmod.c
@@ -428,7 +428,6 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
 	policy->max = maxfreq;
 	policy->cpuinfo.min_freq = maxfreq / max_duration;
 	policy->cpuinfo.max_freq = maxfreq;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 
 	return 0;
 }
@@ -438,6 +437,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
  *   MediaGX/Geode GX initialize cpufreq driver
  */
 static struct cpufreq_driver gx_suspmod_driver = {
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.get		= gx_get_cpuspeed,
 	.verify		= cpufreq_gx_verify,
 	.target		= cpufreq_gx_target,
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index b6edd3c..14466a9 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -47,6 +47,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	struct dev_pm_opp *opp;
 	unsigned long freq_hz, volt, volt_old;
 	unsigned int old_freq, new_freq;
+	bool pll1_sys_temp_enabled = false;
 	int ret;
 
 	new_freq = freq_table[index].frequency;
@@ -124,6 +125,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 		if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
 			clk_set_rate(pll1_sys_clk, new_freq * 1000);
 			clk_set_parent(pll1_sw_clk, pll1_sys_clk);
+		} else {
+			/* pll1_sys needs to be enabled for divider rate change to work. */
+			pll1_sys_temp_enabled = true;
+			clk_prepare_enable(pll1_sys_clk);
 		}
 	}
 
@@ -135,6 +140,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 		return ret;
 	}
 
+	/* PLL1 is only needed until after ARM-PODF is set. */
+	if (pll1_sys_temp_enabled)
+		clk_disable_unprepare(pll1_sys_clk);
+
 	/* scaling down?  scale voltage after frequency */
 	if (new_freq < old_freq) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 65ee4fc..04dd5f4 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -2132,7 +2132,6 @@ static int __intel_pstate_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.max_freq *= cpu->pstate.scaling;
 
 	intel_pstate_init_acpi_perf_limits(policy);
-	cpumask_set_cpu(policy->cpu, policy->cpus);
 
 	policy->fast_switch_possible = true;
 
@@ -2146,7 +2145,6 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
 	if (ret)
 		return ret;
 
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	if (IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE))
 		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	else
diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c
index 074971b..542aa9a 100644
--- a/drivers/cpufreq/longrun.c
+++ b/drivers/cpufreq/longrun.c
@@ -270,7 +270,6 @@ static int longrun_cpu_init(struct cpufreq_policy *policy)
 	/* cpuinfo and default policy values */
 	policy->cpuinfo.min_freq = longrun_low_freq;
 	policy->cpuinfo.max_freq = longrun_high_freq;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	longrun_get_policy(policy);
 
 	return 0;
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 9ac27b2..da34469 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -114,7 +114,7 @@ static struct cpufreq_driver loongson2_cpufreq_driver = {
 	.attr = cpufreq_generic_attr,
 };
 
-static struct platform_device_id platform_device_ids[] = {
+static const struct platform_device_id platform_device_ids[] = {
 	{
 		.name = "loongson2_cpufreq",
 	},
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index f9f00fb..18c4bd9 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -507,7 +507,7 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_driver mt8173_cpufreq_driver = {
+static struct cpufreq_driver mtk_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
 		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
 	.verify = cpufreq_generic_frequency_table_verify,
@@ -520,7 +520,7 @@ static struct cpufreq_driver mt8173_cpufreq_driver = {
 	.attr = cpufreq_generic_attr,
 };
 
-static int mt8173_cpufreq_probe(struct platform_device *pdev)
+static int mtk_cpufreq_probe(struct platform_device *pdev)
 {
 	struct mtk_cpu_dvfs_info *info, *tmp;
 	int cpu, ret;
@@ -547,7 +547,7 @@ static int mt8173_cpufreq_probe(struct platform_device *pdev)
 		list_add(&info->list_head, &dvfs_info_list);
 	}
 
-	ret = cpufreq_register_driver(&mt8173_cpufreq_driver);
+	ret = cpufreq_register_driver(&mtk_cpufreq_driver);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n");
 		goto release_dvfs_info_list;
@@ -564,15 +564,18 @@ release_dvfs_info_list:
 	return ret;
 }
 
-static struct platform_driver mt8173_cpufreq_platdrv = {
+static struct platform_driver mtk_cpufreq_platdrv = {
 	.driver = {
-		.name	= "mt8173-cpufreq",
+		.name	= "mtk-cpufreq",
 	},
-	.probe		= mt8173_cpufreq_probe,
+	.probe		= mtk_cpufreq_probe,
 };
 
 /* List of machines supported by this driver */
-static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7622", },
+	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
@@ -580,7 +583,7 @@ static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
 	{ }
 };
 
-static int __init mt8173_cpufreq_driver_init(void)
+static int __init mtk_cpufreq_driver_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
@@ -591,14 +594,14 @@ static int __init mt8173_cpufreq_driver_init(void)
 	if (!np)
 		return -ENODEV;
 
-	match = of_match_node(mt8173_cpufreq_machines, np);
+	match = of_match_node(mtk_cpufreq_machines, np);
 	of_node_put(np);
 	if (!match) {
-		pr_warn("Machine is not compatible with mt8173-cpufreq\n");
+		pr_warn("Machine is not compatible with mtk-cpufreq\n");
 		return -ENODEV;
 	}
 
-	err = platform_driver_register(&mt8173_cpufreq_platdrv);
+	err = platform_driver_register(&mtk_cpufreq_platdrv);
 	if (err)
 		return err;
 
@@ -608,7 +611,7 @@ static int __init mt8173_cpufreq_driver_init(void)
 	 * and the device registration codes are put here to handle defer
 	 * probing.
 	 */
-	pdev = platform_device_register_simple("mt8173-cpufreq", -1, NULL, 0);
+	pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0);
 	if (IS_ERR(pdev)) {
 		pr_err("failed to register mtk-cpufreq platform device\n");
 		return PTR_ERR(pdev);
@@ -616,4 +619,4 @@ static int __init mt8173_cpufreq_driver_init(void)
 
 	return 0;
 }
-device_initcall(mt8173_cpufreq_driver_init);
+device_initcall(mtk_cpufreq_driver_init);
diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index ff44016..61ae06c 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -442,7 +442,8 @@ static struct cpufreq_driver pmac_cpufreq_driver = {
 	.init		= pmac_cpufreq_cpu_init,
 	.suspend	= pmac_cpufreq_suspend,
 	.resume		= pmac_cpufreq_resume,
-	.flags		= CPUFREQ_PM_NO_WARN,
+	.flags		= CPUFREQ_PM_NO_WARN |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.attr		= cpufreq_generic_attr,
 	.name		= "powermac",
 };
@@ -626,14 +627,16 @@ static int __init pmac_cpufreq_setup(void)
 	if (!value)
 		goto out;
 	cur_freq = (*value) / 1000;
-	transition_latency = CPUFREQ_ETERNAL;
 
 	/*  Check for 7447A based MacRISC3 */
 	if (of_machine_is_compatible("MacRISC3") &&
 	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
 	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
+
+		/* Allow dynamic switching */
 		transition_latency = 8000000;
+		pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING;
 	/* Check for other MacRISC3 machines */
 	} else if (of_machine_is_compatible("PowerBook3,4") ||
 		   of_machine_is_compatible("PowerBook3,5") ||
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
index 267e089..be623dd 100644
--- a/drivers/cpufreq/pmac64-cpufreq.c
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -516,7 +516,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 		goto bail;
 	}
 
-	DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
+	DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock);
 
 	/* Now get all the platform functions */
 	pfunc_cpu_getfreq =
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index f82074e..5d31c2d 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -602,6 +602,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
 	}
 
 	clk_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!clk_base) {
 		pr_err("%s: failed to map clock registers\n", __func__);
 		return -EFAULT;
@@ -612,6 +613,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
 		if (id < 0 || id >= ARRAY_SIZE(dmc_base)) {
 			pr_err("%s: failed to get alias of dmc node '%s'\n",
 				__func__, np->name);
+			of_node_put(np);
 			return id;
 		}
 
@@ -619,6 +621,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
 		if (!dmc_base[id]) {
 			pr_err("%s: failed to map dmc%d registers\n",
 				__func__, id);
+			of_node_put(np);
 			return -EFAULT;
 		}
 	}
diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c
index 728eab7..e2d8a77 100644
--- a/drivers/cpufreq/sa1100-cpufreq.c
+++ b/drivers/cpufreq/sa1100-cpufreq.c
@@ -197,11 +197,12 @@ static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr)
 
 static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
 {
-	return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL);
+	return cpufreq_generic_init(policy, sa11x0_freq_table, 0);
 }
 
 static struct cpufreq_driver sa1100_driver __refdata = {
-	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= sa1100_target,
 	.get		= sa11x0_getspeed,
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 2bac9b6..66e5fb0 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -306,13 +306,14 @@ static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
 
 static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
 {
-	return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL);
+	return cpufreq_generic_init(policy, sa11x0_freq_table, 0);
 }
 
 /* sa1110_driver needs __refdata because it must remain after init registers
  * it with cpufreq_register_driver() */
 static struct cpufreq_driver sa1110_driver __refdata = {
-	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= sa1110_target,
 	.get		= sa11x0_getspeed,
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
index 719c3d9..28893d4 100644
--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -137,8 +137,6 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 			(clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
 	}
 
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
 	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
 	       "Maximum %u.%03u MHz.\n",
 	       policy->min / 1000, policy->min % 1000,
@@ -159,6 +157,7 @@ static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver sh_cpufreq_driver = {
 	.name		= "sh",
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.get		= sh_cpufreq_get,
 	.target		= sh_cpufreq_target,
 	.verify		= sh_cpufreq_verify,
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index b86953a..0412a24 100644
--- a/drivers/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -207,7 +207,7 @@ static unsigned int speedstep_detect_chipset(void)
 		 * 8100 which use a pretty old revision of the 82815
 		 * host bridge. Abort on these systems.
 		 */
-		static struct pci_dev *hostbridge;
+		struct pci_dev *hostbridge;
 
 		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82815_MC,
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 1b80621..ccab452 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -35,7 +35,7 @@ static int relaxed_check;
 static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 {
 	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
-	struct {
+	static const struct {
 		unsigned int ratio;	/* Frequency Multiplier (x10) */
 		u8 bitmap;		/* power on configuration bits
 					[27, 25:22] (in MSR 0x2a) */
@@ -58,7 +58,7 @@ static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 	};
 
 	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
-	struct {
+	static const struct {
 		unsigned int value;	/* Front Side Bus speed in MHz */
 		u8 bitmap;		/* power on configuration bits [18: 19]
 					(in MSR 0x2a) */
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 37b30071..d23f24c 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -266,7 +266,6 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 			pr_debug("workaround worked.\n");
 	}
 
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	return cpufreq_table_validate_and_show(policy, speedstep_freqs);
 }
 
@@ -290,6 +289,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver speedstep_driver = {
 	.name		= "speedstep-smi",
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= speedstep_target,
 	.init		= speedstep_cpu_init,
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index d2d0430..4710573 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -65,8 +65,8 @@ static int sti_cpufreq_fetch_major(void) {
 	ret = of_property_read_u32_index(np, "st,syscfg",
 					 MAJOR_ID_INDEX, &major_offset);
 	if (ret) {
-		dev_err(dev, "No major number offset provided in %s [%d]\n",
-			np->full_name, ret);
+		dev_err(dev, "No major number offset provided in %pOF [%d]\n",
+			np, ret);
 		return ret;
 	}
 
@@ -92,8 +92,8 @@ static int sti_cpufreq_fetch_minor(void)
 					 MINOR_ID_INDEX, &minor_offset);
 	if (ret) {
 		dev_err(dev,
-			"No minor number offset provided %s [%d]\n",
-			np->full_name, ret);
+			"No minor number offset provided %pOF [%d]\n",
+			np, ret);
 		return ret;
 	}
 
diff --git a/drivers/cpufreq/tango-cpufreq.c b/drivers/cpufreq/tango-cpufreq.c
new file mode 100644
index 0000000..89a7f86
--- /dev/null
+++ b/drivers/cpufreq/tango-cpufreq.c
@@ -0,0 +1,38 @@
+#include <linux/of.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+
+static const struct of_device_id machines[] __initconst = {
+	{ .compatible = "sigma,tango4" },
+	{ /* sentinel */ }
+};
+
+static int __init tango_cpufreq_init(void)
+{
+	struct device *cpu_dev = get_cpu_device(0);
+	unsigned long max_freq;
+	struct clk *cpu_clk;
+	void *res;
+
+	if (!of_match_node(machines, of_root))
+		return -ENODEV;
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk))
+		return -ENODEV;
+
+	max_freq = clk_get_rate(cpu_clk);
+
+	dev_pm_opp_add(cpu_dev, max_freq / 1, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 2, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 3, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 5, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 9, 0);
+
+	res = platform_device_register_data(NULL, "cpufreq-dt", -1, NULL, 0);
+
+	return PTR_ERR_OR_ZERO(res);
+}
+device_initcall(tango_cpufreq_init);
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index a7b5658..b29cd33 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -245,8 +245,6 @@ static int ti_cpufreq_init(void)
 	if (ret)
 		goto fail_put_node;
 
-	of_node_put(opp_data->opp_node);
-
 	ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
 							  version, VERSION_COUNT));
 	if (ret) {
@@ -255,6 +253,8 @@ static int ti_cpufreq_init(void)
 		goto fail_put_node;
 	}
 
+	of_node_put(opp_data->opp_node);
+
 register_cpufreq_dt:
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 
diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c
index 6f9dfa8..db62d98 100644
--- a/drivers/cpufreq/unicore2-cpufreq.c
+++ b/drivers/cpufreq/unicore2-cpufreq.c
@@ -58,13 +58,12 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
 
 	policy->min = policy->cpuinfo.min_freq = 250000;
 	policy->max = policy->cpuinfo.max_freq = 1000000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	policy->clk = clk_get(NULL, "MAIN_CLK");
 	return PTR_ERR_OR_ZERO(policy->clk);
 }
 
 static struct cpufreq_driver ucv2_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify		= ucv2_verify_speed,
 	.target		= ucv2_target,
 	.get		= cpufreq_generic_get,