summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
authorDeepak Saxena <dsaxena@linaro.org>2011-11-01 14:25:25 -0700
committerJohn Stultz <john.stultz@linaro.org>2011-11-21 19:00:59 -0800
commit5f724e84f91550985a9ae3deb6e0dbc8d8396ed7 (patch)
treec7c8695e1963a8f35791848727c39af41c1ffac2 /drivers/clocksource
parentcbf1599b3589c6c73999095ca25e9c3f23042e19 (diff)
downloadop-kernel-dev-5f724e84f91550985a9ae3deb6e0dbc8d8396ed7.zip
op-kernel-dev-5f724e84f91550985a9ae3deb6e0dbc8d8396ed7.tar.gz
time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
The i8253 clockevent & clocksource driver uses PIT_LATCH except for two cases where it uses LATCH: 1) /* VIA686a test code... reset the latch if count > max + 1 */ if (count > LATCH) { LATCH is based on CLOCK_TICK_RATE which is defined as PIT_TICK_RATE on x86 so this should just be the later. 2) ... switch (mode) { case CLOCK_EVT_MODE_PERIODIC: /* binary, mode 2, LSB/MSB, ch 0 */ outb_p(0x34, PIT_MODE); outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ outb_p(LATCH >> 8 , PIT_CH0); /* MSB */ ... MIPS and ARM are the only other arches that use this driver. In the MIPS case CLOCK_TICK_RATE is defined as the same value as PIT_TICK_RATE. For ARM, the only machine that uses it is Footbridge which has a totally bogus CLOCK_TICK_RATE according to the comments. Furthermore, the clockevent_i8253_init() initializes the clockevent with PIT_TIC_RATE, so there's no reason to use the generic LATCH. This is part of work to remove and depecrate the global CLOCK_TICK_RATE symbol. Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/i8253.c6
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 27c49e6..e7cab2d 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -53,7 +53,7 @@ static cycle_t i8253_read(struct clocksource *cs)
count |= inb_p(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
+ if (count > PIT_LATCH) {
outb_p(0x34, PIT_MODE);
outb_p(PIT_LATCH & 0xff, PIT_CH0);
outb_p(PIT_LATCH >> 8, PIT_CH0);
@@ -114,8 +114,8 @@ static void init_pit_timer(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
/* binary, mode 2, LSB/MSB, ch 0 */
outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
- outb_p(LATCH >> 8 , PIT_CH0); /* MSB */
+ outb_p(PIT_LATCH & 0xff , PIT_CH0); /* LSB */
+ outb_p(PIT_LATCH >> 8 , PIT_CH0); /* MSB */
break;
case CLOCK_EVT_MODE_SHUTDOWN:
OpenPOWER on IntegriCloud