[PATCH] Time: i386 Clocksource Drivers

Implement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc).
With this patch, the conversion of the i386 arch to the generic timekeeping
code should be complete.

The patch should be fairly straight forward, only adding the new clocksources.

[hirofumi@mail.parknet.co.jp: acpi_pm cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
new file mode 100644
index 0000000..a0e5cde
--- /dev/null
+++ b/drivers/clocksource/acpi_pm.c
@@ -0,0 +1,177 @@
+/*
+ * linux/drivers/clocksource/acpi_pm.c
+ *
+ * This file contains the ACPI PM based clocksource.
+ *
+ * This code was largely moved from the i386 timer_pm.c file
+ * which was (C) Dominik Brodowski <linux@brodo.de> 2003
+ * and contained the following comments:
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+
+/*
+ * The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c
+ */
+u32 pmtmr_ioport;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+static inline u32 read_pmtmr(void)
+{
+	/* mask the output to 24 bits */
+	return inl(pmtmr_ioport) & ACPI_PM_MASK;
+}
+
+static cycle_t acpi_pm_read_verified(void)
+{
+	u32 v1 = 0, v2 = 0, v3 = 0;
+
+	/*
+	 * It has been reported that because of various broken
+	 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM clock
+	 * source is not latched, so you must read it multiple
+	 * times to ensure a safe value is read:
+	 */
+	do {
+		v1 = read_pmtmr();
+		v2 = read_pmtmr();
+		v3 = read_pmtmr();
+	} while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+			|| (v3 > v1 && v3 < v2));
+
+	return (cycle_t)v2;
+}
+
+static cycle_t acpi_pm_read(void)
+{
+	return (cycle_t)read_pmtmr();
+}
+
+static struct clocksource clocksource_acpi_pm = {
+	.name		= "acpi_pm",
+	.rating		= 200,
+	.read		= acpi_pm_read,
+	.mask		= (cycle_t)ACPI_PM_MASK,
+	.mult		= 0, /*to be caluclated*/
+	.shift		= 22,
+	.is_continuous	= 1,
+};
+
+
+#ifdef CONFIG_PCI
+static int acpi_pm_good;
+static int __init acpi_pm_good_setup(char *__str)
+{
+       acpi_pm_good = 1;
+       return 1;
+}
+__setup("acpi_pm_good", acpi_pm_good_setup);
+
+static inline void acpi_pm_need_workaround(void)
+{
+	clocksource_acpi_pm.read = acpi_pm_read_verified;
+	clocksource_acpi_pm.rating = 110;
+}
+
+/*
+ * PIIX4 Errata:
+ *
+ * The power management timer may return improper results when read.
+ * Although the timer value settles properly after incrementing,
+ * while incrementing there is a 3 ns window every 69.8 ns where the
+ * timer value is indeterminate (a 4.2% chance that the data will be
+ * incorrect when read). As a result, the ACPI free running count up
+ * timer specification is violated due to erroneous reads.
+ */
+static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
+{
+	u8 rev;
+
+	if (acpi_pm_good)
+		return;
+
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+	/* the bug has been fixed in PIIX4M */
+	if (rev < 3) {
+		printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
+		       " Due to workarounds for a bug,\n"
+		       "* this clock source is slow. Consider trying"
+		       " other clock sources\n");
+
+		acpi_pm_need_workaround();
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
+			acpi_pm_check_blacklist);
+
+static void __devinit acpi_pm_check_graylist(struct pci_dev *dev)
+{
+	if (acpi_pm_good)
+		return;
+
+	printk(KERN_WARNING "* The chipset may have PM-Timer Bug. Due to"
+	       " workarounds for a bug,\n"
+	       "* this clock source is slow. If you are sure your timer"
+	       " does not have\n"
+	       "* this bug, please use \"acpi_pm_good\" to disable the"
+	       " workaround\n");
+
+	acpi_pm_need_workaround();
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+			acpi_pm_check_graylist);
+#endif
+
+
+static int __init init_acpi_pm_clocksource(void)
+{
+	u32 value1, value2;
+	unsigned int i;
+
+	if (!pmtmr_ioport)
+		return -ENODEV;
+
+	clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC,
+						clocksource_acpi_pm.shift);
+
+	/* "verify" this timing source: */
+	value1 = read_pmtmr();
+	for (i = 0; i < 10000; i++) {
+		value2 = read_pmtmr();
+		if (value2 == value1)
+			continue;
+		if (value2 > value1)
+			goto pm_good;
+		if ((value2 < value1) && ((value2) < 0xFFF))
+			goto pm_good;
+		printk(KERN_INFO "PM-Timer had inconsistent results:"
+			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
+		return -EINVAL;
+	}
+	printk(KERN_INFO "PM-Timer had no reasonable result:"
+			" 0x%#x - aborting.\n", value1);
+	return -ENODEV;
+
+pm_good:
+	return register_clocksource(&clocksource_acpi_pm);
+}
+
+module_init(init_acpi_pm_clocksource);