Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc

Pull spi updates from Mark Brown:
 "No framework work here, only a bunch of driver updates of varying
  sizes:

   - Factoring out of the core hardware support from the MXS MMC driver
     by Marek Vasut to allow the hardware to also be used for SPI.
   - Lots of error handling cleanups from Guenter Roeck
   - Removal of the existing Tegra driver which is quite comprehensively
     broken as detailed in the changelog for the removal.
   - DT suppport for the PL022 and GPIO drivers.
   - pinctrl support for OMAP and PL022."

Pulling from Mark Brown as Grant Likely is still busy moving.

* tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits)
  spi: remove completely broken Tegra driver
  spi/imx: set the inactive state of the clock according to the clock polarity
  spi/pl022: get/put resources on suspend/resume
  spi/pl022: use more managed resources
  spi/pl022: Devicetree support w/o platform data
  spi/s3c64xx: Don't free controller_data on non-dt platforms
  spi: omap2-mcspi: add pinctrl support
  spi/pl022: adopt pinctrl support
  spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function
  spi/gpio: Fix stub for spi_gpio_probe_dt()
  spi/mxs: Make the SPI block clock speed configurable via DT
  spi: spi-sh-hspi: drop frees of devm_ alloc'd data
  spi/pl022: Fix chipselects pointer computation
  spi: spi-tle62x0: Use module_spi_driver macro
  mxs/spi: Rework the mxs_ssp_timeout to be more readable
  mxs/spi: Decrement the DMA/PIO border
  mxs/spi: Increment the transfer length only if transfer succeeded
  mxs/spi: Fix issues when doing long continuous transfer
  spi: spi-gpio: Add DT bindings
  spi: spi-gpio: store chipselect information in private structure
  ...

2 files changed, 63 insertions, 1 deletions

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7bedeec..a6a2223 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -2,7 +2,7 @@
 # Makefile for mxs specific clk
 #
 
-obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
 
 obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
 obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c
new file mode 100644
index 0000000..af7bdbf
--- /dev/null
+++ b/drivers/clk/mxs/clk-ssp.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+	unsigned int ssp_clk, ssp_sck;
+	u32 clock_divide, clock_rate;
+	u32 val;
+
+	ssp_clk = clk_get_rate(ssp->clk);
+
+	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+		clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+		if (clock_rate <= 255)
+			break;
+	}
+
+	if (clock_divide > 254) {
+		dev_err(ssp->dev,
+			"%s: cannot set clock to %d\n", __func__, rate);
+		return;
+	}
+
+	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
+	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+	ssp->clk_rate = ssp_sck;
+
+	dev_dbg(ssp->dev,
+		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+		__func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);