clk: x86: add support for Lynxpoint LPSS clocks

Intel Lynxpoint Low Power Subsystem hosts peripherals like UART, I2C and
SPI controllers. For most of these there is a configuration register that
allows software to enable and disable the functional clock. Disabling the
clock while the peripheral is not used saves power.

In order to take advantage of this we add a new clock gate of type
lpss_gate that just re-uses the ordinary clk_gate but in addition is able
to enumerate the base address register of the device using ACPI.

We then create a clock tree that models the Lynxpoint LPSS clocks using
these gates and fixed clocks so that we can pass clock rate to the drivers
as well.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

5 files changed, 224 insertions, 0 deletions

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ee90e87..ee11460 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 obj-$(CONFIG_ARCH_SUNXI)	+= clk-sunxi.o
 obj-$(CONFIG_ARCH_ZYNQ)		+= clk-zynq.o
+obj-$(CONFIG_X86)		+= x86/
 
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
new file mode 100644
index 0000000..f9ba4fa
--- /dev/null
+++ b/drivers/clk/x86/Makefile
@@ -0,0 +1,2 @@
+clk-x86-lpss-objs		:= clk-lpss.o clk-lpt.o
+obj-$(CONFIG_X86_INTEL_LPSS)	+= clk-x86-lpss.o
diff --git a/drivers/clk/x86/clk-lpss.c b/drivers/clk/x86/clk-lpss.c
new file mode 100644
index 0000000..b5e229f
--- /dev/null
+++ b/drivers/clk/x86/clk-lpss.c
@@ -0,0 +1,99 @@
+/*
+ * Intel Low Power Subsystem clocks.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *	    Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+static int clk_lpss_is_mmio_resource(struct acpi_resource *res, void *data)
+{
+	struct resource r;
+	return !acpi_dev_resource_memory(res, &r);
+}
+
+static acpi_status clk_lpss_find_mmio(acpi_handle handle, u32 level,
+				      void *data, void **retval)
+{
+	struct resource_list_entry *rentry;
+	struct list_head resource_list;
+	struct acpi_device *adev;
+	const char *uid = data;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (uid) {
+		if (!adev->pnp.unique_id)
+			return AE_OK;
+		if (strcmp(uid, adev->pnp.unique_id))
+			return AE_OK;
+	}
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     clk_lpss_is_mmio_resource, NULL);
+	if (ret < 0)
+		return AE_NO_MEMORY;
+
+	list_for_each_entry(rentry, &resource_list, node)
+		if (resource_type(&rentry->res) == IORESOURCE_MEM) {
+			*(struct resource *)retval = rentry->res;
+			break;
+		}
+
+	acpi_dev_free_resource_list(&resource_list);
+	return AE_OK;
+}
+
+/**
+ * clk_register_lpss_gate - register LPSS clock gate
+ * @name: name of this clock gate
+ * @parent_name: parent clock name
+ * @hid: ACPI _HID of the device
+ * @uid: ACPI _UID of the device (optional)
+ * @offset: LPSS PRV_CLOCK_PARAMS offset
+ *
+ * Creates and registers LPSS clock gate.
+ */
+struct clk *clk_register_lpss_gate(const char *name, const char *parent_name,
+				   const char *hid, const char *uid,
+				   unsigned offset)
+{
+	struct resource res = { };
+	void __iomem *mmio_base;
+	acpi_status status;
+	struct clk *clk;
+
+	/*
+	 * First try to look the device and its mmio resource from the
+	 * ACPI namespace.
+	 */
+	status = acpi_get_devices(hid, clk_lpss_find_mmio, (void *)uid,
+				  (void **)&res);
+	if (ACPI_FAILURE(status) || !res.start)
+		return ERR_PTR(-ENODEV);
+
+	mmio_base = ioremap(res.start, resource_size(&res));
+	if (!mmio_base)
+		return ERR_PTR(-ENOMEM);
+
+	clk = clk_register_gate(NULL, name, parent_name, 0, mmio_base + offset,
+				0, 0, NULL);
+	if (IS_ERR(clk))
+		iounmap(mmio_base);
+
+	return clk;
+}
diff --git a/drivers/clk/x86/clk-lpss.h b/drivers/clk/x86/clk-lpss.h
new file mode 100644
index 0000000..e9460f4
--- /dev/null
+++ b/drivers/clk/x86/clk-lpss.h
@@ -0,0 +1,36 @@
+/*
+ * Intel Low Power Subsystem clock.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *	    Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CLK_LPSS_H
+#define __CLK_LPSS_H
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+
+#ifdef CONFIG_ACPI
+extern struct clk *clk_register_lpss_gate(const char *name,
+					  const char *parent_name,
+					  const char *hid, const char *uid,
+					  unsigned offset);
+#else
+static inline struct clk *clk_register_lpss_gate(const char *name,
+						 const char *parent_name,
+						 const char *hid,
+						 const char *uid,
+						 unsigned offset)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+
+#endif /* __CLK_LPSS_H */
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
new file mode 100644
index 0000000..81298ae
--- /dev/null
+++ b/drivers/clk/x86/clk-lpt.c
@@ -0,0 +1,86 @@
+/*
+ * Intel Lynxpoint LPSS clocks.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *	    Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "clk-lpss.h"
+
+#define PRV_CLOCK_PARAMS 0x800
+
+static int lpt_clk_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+
+	/* LPSS free running clock */
+	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
+				      100000000);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/* Shared DMA clock */
+	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+
+	/* SPI clocks */
+	clk = clk_register_lpss_gate("spi0_clk", "lpss_clk", "INT33C0", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C0:00");
+
+	clk = clk_register_lpss_gate("spi1_clk", "lpss_clk", "INT33C1", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C1:00");
+
+	/* I2C clocks */
+	clk = clk_register_lpss_gate("i2c0_clk", "lpss_clk", "INT33C2", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C2:00");
+
+	clk = clk_register_lpss_gate("i2c1_clk", "lpss_clk", "INT33C3", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C3:00");
+
+	/* UART clocks */
+	clk = clk_register_lpss_gate("uart0_clk", "lpss_clk", "INT33C4", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C4:00");
+
+	clk = clk_register_lpss_gate("uart1_clk", "lpss_clk", "INT33C5", NULL,
+				     PRV_CLOCK_PARAMS);
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, NULL, "INT33C5:00");
+
+	return 0;
+}
+
+static struct platform_driver lpt_clk_driver = {
+	.driver = {
+		.name = "clk-lpt",
+		.owner = THIS_MODULE,
+	},
+	.probe = lpt_clk_probe,
+};
+
+static int __init lpt_clk_init(void)
+{
+	return platform_driver_register(&lpt_clk_driver);
+}
+arch_initcall(lpt_clk_init);