Merge linux-block/for-4.3/core into md/for-linux

There were a few conflicts that are fairly easy to resolve.

Signed-off-by: NeilBrown <neilb@suse.com>

24 files changed, 2336 insertions, 51 deletions

diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index aec862b..826c325 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -1,5 +1,6 @@
 obj-y					+= clk.o
 obj-y					+= clk-audio-sync.o
+obj-y					+= clk-dfll.o
 obj-y					+= clk-divider.o
 obj-y					+= clk-periph.o
 obj-y					+= clk-periph-gate.o
@@ -16,4 +17,6 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clk-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += clk-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= clk-tegra114.o
 obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124-dfll-fcpu.o
 obj-$(CONFIG_ARCH_TEGRA_132_SOC)	+= clk-tegra124.o
+obj-y					+= cvb.o
diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
new file mode 100644
index 0000000..c2ff859
--- /dev/null
+++ b/drivers/clk/tegra/clk-dfll.c
@@ -0,0 +1,1757 @@
+/*
+ * clk-dfll.c - Tegra DFLL clock source common code
+ *
+ * Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved.
+ *
+ * Aleksandr Frid <afrid@nvidia.com>
+ * Paul Walmsley <pwalmsley@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * This library is for the DVCO and DFLL IP blocks on the Tegra124
+ * SoC. These IP blocks together are also known at NVIDIA as
+ * "CL-DVFS". To try to avoid confusion, this code refers to them
+ * collectively as the "DFLL."
+ *
+ * The DFLL is a root clocksource which tolerates some amount of
+ * supply voltage noise. Tegra124 uses it to clock the fast CPU
+ * complex when the target CPU speed is above a particular rate. The
+ * DFLL can be operated in either open-loop mode or closed-loop mode.
+ * In open-loop mode, the DFLL generates an output clock appropriate
+ * to the supply voltage. In closed-loop mode, when configured with a
+ * target frequency, the DFLL minimizes supply voltage while
+ * delivering an average frequency equal to the target.
+ *
+ * Devices clocked by the DFLL must be able to tolerate frequency
+ * variation. In the case of the CPU, it's important to note that the
+ * CPU cycle time will vary. This has implications for
+ * performance-measurement code and any code that relies on the CPU
+ * cycle time to delay for a certain length of time.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/seq_file.h>
+
+#include "clk-dfll.h"
+
+/*
+ * DFLL control registers - access via dfll_{readl,writel}
+ */
+
+/* DFLL_CTRL: DFLL control register */
+#define DFLL_CTRL			0x00
+#define DFLL_CTRL_MODE_MASK		0x03
+
+/* DFLL_CONFIG: DFLL sample rate control */
+#define DFLL_CONFIG			0x04
+#define DFLL_CONFIG_DIV_MASK		0xff
+#define DFLL_CONFIG_DIV_PRESCALE	32
+
+/* DFLL_PARAMS: tuning coefficients for closed loop integrator */
+#define DFLL_PARAMS			0x08
+#define DFLL_PARAMS_CG_SCALE		(0x1 << 24)
+#define DFLL_PARAMS_FORCE_MODE_SHIFT	22
+#define DFLL_PARAMS_FORCE_MODE_MASK	(0x3 << DFLL_PARAMS_FORCE_MODE_SHIFT)
+#define DFLL_PARAMS_CF_PARAM_SHIFT	16
+#define DFLL_PARAMS_CF_PARAM_MASK	(0x3f << DFLL_PARAMS_CF_PARAM_SHIFT)
+#define DFLL_PARAMS_CI_PARAM_SHIFT	8
+#define DFLL_PARAMS_CI_PARAM_MASK	(0x7 << DFLL_PARAMS_CI_PARAM_SHIFT)
+#define DFLL_PARAMS_CG_PARAM_SHIFT	0
+#define DFLL_PARAMS_CG_PARAM_MASK	(0xff << DFLL_PARAMS_CG_PARAM_SHIFT)
+
+/* DFLL_TUNE0: delay line configuration register 0 */
+#define DFLL_TUNE0			0x0c
+
+/* DFLL_TUNE1: delay line configuration register 1 */
+#define DFLL_TUNE1			0x10
+
+/* DFLL_FREQ_REQ: target DFLL frequency control */
+#define DFLL_FREQ_REQ			0x14
+#define DFLL_FREQ_REQ_FORCE_ENABLE	(0x1 << 28)
+#define DFLL_FREQ_REQ_FORCE_SHIFT	16
+#define DFLL_FREQ_REQ_FORCE_MASK	(0xfff << DFLL_FREQ_REQ_FORCE_SHIFT)
+#define FORCE_MAX			2047
+#define FORCE_MIN			-2048
+#define DFLL_FREQ_REQ_SCALE_SHIFT	8
+#define DFLL_FREQ_REQ_SCALE_MASK	(0xff << DFLL_FREQ_REQ_SCALE_SHIFT)
+#define DFLL_FREQ_REQ_SCALE_MAX		256
+#define DFLL_FREQ_REQ_FREQ_VALID	(0x1 << 7)
+#define DFLL_FREQ_REQ_MULT_SHIFT	0
+#define DFLL_FREQ_REG_MULT_MASK		(0x7f << DFLL_FREQ_REQ_MULT_SHIFT)
+#define FREQ_MAX			127
+
+/* DFLL_DROOP_CTRL: droop prevention control */
+#define DFLL_DROOP_CTRL			0x1c
+
+/* DFLL_OUTPUT_CFG: closed loop mode control registers */
+/* NOTE: access via dfll_i2c_{readl,writel} */
+#define DFLL_OUTPUT_CFG			0x20
+#define DFLL_OUTPUT_CFG_I2C_ENABLE	(0x1 << 30)
+#define OUT_MASK			0x3f
+#define DFLL_OUTPUT_CFG_SAFE_SHIFT	24
+#define DFLL_OUTPUT_CFG_SAFE_MASK	\
+		(OUT_MASK << DFLL_OUTPUT_CFG_SAFE_SHIFT)
+#define DFLL_OUTPUT_CFG_MAX_SHIFT	16
+#define DFLL_OUTPUT_CFG_MAX_MASK	\
+		(OUT_MASK << DFLL_OUTPUT_CFG_MAX_SHIFT)
+#define DFLL_OUTPUT_CFG_MIN_SHIFT	8
+#define DFLL_OUTPUT_CFG_MIN_MASK	\
+		(OUT_MASK << DFLL_OUTPUT_CFG_MIN_SHIFT)
+#define DFLL_OUTPUT_CFG_PWM_DELTA	(0x1 << 7)
+#define DFLL_OUTPUT_CFG_PWM_ENABLE	(0x1 << 6)
+#define DFLL_OUTPUT_CFG_PWM_DIV_SHIFT	0
+#define DFLL_OUTPUT_CFG_PWM_DIV_MASK	\
+		(OUT_MASK << DFLL_OUTPUT_CFG_PWM_DIV_SHIFT)
+
+/* DFLL_OUTPUT_FORCE: closed loop mode voltage forcing control */
+#define DFLL_OUTPUT_FORCE		0x24
+#define DFLL_OUTPUT_FORCE_ENABLE	(0x1 << 6)
+#define DFLL_OUTPUT_FORCE_VALUE_SHIFT	0
+#define DFLL_OUTPUT_FORCE_VALUE_MASK	\
+		(OUT_MASK << DFLL_OUTPUT_FORCE_VALUE_SHIFT)
+
+/* DFLL_MONITOR_CTRL: internal monitor data source control */
+#define DFLL_MONITOR_CTRL		0x28
+#define DFLL_MONITOR_CTRL_FREQ		6
+
+/* DFLL_MONITOR_DATA: internal monitor data output */
+#define DFLL_MONITOR_DATA		0x2c
+#define DFLL_MONITOR_DATA_NEW_MASK	(0x1 << 16)
+#define DFLL_MONITOR_DATA_VAL_SHIFT	0
+#define DFLL_MONITOR_DATA_VAL_MASK	(0xFFFF << DFLL_MONITOR_DATA_VAL_SHIFT)
+
+/*
+ * I2C output control registers - access via dfll_i2c_{readl,writel}
+ */
+
+/* DFLL_I2C_CFG: I2C controller configuration register */
+#define DFLL_I2C_CFG			0x40
+#define DFLL_I2C_CFG_ARB_ENABLE		(0x1 << 20)
+#define DFLL_I2C_CFG_HS_CODE_SHIFT	16
+#define DFLL_I2C_CFG_HS_CODE_MASK	(0x7 << DFLL_I2C_CFG_HS_CODE_SHIFT)
+#define DFLL_I2C_CFG_PACKET_ENABLE	(0x1 << 15)
+#define DFLL_I2C_CFG_SIZE_SHIFT		12
+#define DFLL_I2C_CFG_SIZE_MASK		(0x7 << DFLL_I2C_CFG_SIZE_SHIFT)
+#define DFLL_I2C_CFG_SLAVE_ADDR_10	(0x1 << 10)
+#define DFLL_I2C_CFG_SLAVE_ADDR_SHIFT_7BIT	1
+#define DFLL_I2C_CFG_SLAVE_ADDR_SHIFT_10BIT	0
+
+/* DFLL_I2C_VDD_REG_ADDR: PMIC I2C address for closed loop mode */
+#define DFLL_I2C_VDD_REG_ADDR		0x44
+
+/* DFLL_I2C_STS: I2C controller status */
+#define DFLL_I2C_STS			0x48
+#define DFLL_I2C_STS_I2C_LAST_SHIFT	1
+#define DFLL_I2C_STS_I2C_REQ_PENDING	0x1
+
+/* DFLL_INTR_STS: DFLL interrupt status register */
+#define DFLL_INTR_STS			0x5c
+
+/* DFLL_INTR_EN: DFLL interrupt enable register */
+#define DFLL_INTR_EN			0x60
+#define DFLL_INTR_MIN_MASK		0x1
+#define DFLL_INTR_MAX_MASK		0x2
+
+/*
+ * Integrated I2C controller registers - relative to td->i2c_controller_base
+ */
+
+/* DFLL_I2C_CLK_DIVISOR: I2C controller clock divisor */
+#define DFLL_I2C_CLK_DIVISOR		0x6c
+#define DFLL_I2C_CLK_DIVISOR_MASK	0xffff
+#define DFLL_I2C_CLK_DIVISOR_FS_SHIFT	16
+#define DFLL_I2C_CLK_DIVISOR_HS_SHIFT	0
+#define DFLL_I2C_CLK_DIVISOR_PREDIV	8
+#define DFLL_I2C_CLK_DIVISOR_HSMODE_PREDIV	12
+
+/*
+ * Other constants
+ */
+
+/* MAX_DFLL_VOLTAGES: number of LUT entries in the DFLL IP block */
+#define MAX_DFLL_VOLTAGES		33
+
+/*
+ * REF_CLK_CYC_PER_DVCO_SAMPLE: the number of ref_clk cycles that the hardware
+ *    integrates the DVCO counter over - used for debug rate monitoring and
+ *    droop control
+ */
+#define REF_CLK_CYC_PER_DVCO_SAMPLE	4
+
+/*
+ * REF_CLOCK_RATE: the DFLL reference clock rate currently supported by this
+ * driver, in Hz
+ */
+#define REF_CLOCK_RATE			51000000UL
+
+#define DVCO_RATE_TO_MULT(rate, ref_rate)	((rate) / ((ref_rate) / 2))
+#define MULT_TO_DVCO_RATE(mult, ref_rate)	((mult) * ((ref_rate) / 2))
+
+/**
+ * enum dfll_ctrl_mode - DFLL hardware operating mode
+ * @DFLL_UNINITIALIZED: (uninitialized state - not in hardware bitfield)
+ * @DFLL_DISABLED: DFLL not generating an output clock
+ * @DFLL_OPEN_LOOP: DVCO running, but DFLL not adjusting voltage
+ * @DFLL_CLOSED_LOOP: DVCO running, and DFLL adjusting voltage to match
+ *		      the requested rate
+ *
+ * The integer corresponding to the last two states, minus one, is
+ * written to the DFLL hardware to change operating modes.
+ */
+enum dfll_ctrl_mode {
+	DFLL_UNINITIALIZED = 0,
+	DFLL_DISABLED = 1,
+	DFLL_OPEN_LOOP = 2,
+	DFLL_CLOSED_LOOP = 3,
+};
+
+/**
+ * enum dfll_tune_range - voltage range that the driver believes it's in
+ * @DFLL_TUNE_UNINITIALIZED: DFLL tuning not yet programmed
+ * @DFLL_TUNE_LOW: DFLL in the low-voltage range (or open-loop mode)
+ *
+ * Some DFLL tuning parameters may need to change depending on the
+ * DVCO's voltage; these states represent the ranges that the driver
+ * supports. These are software states; these values are never
+ * written into registers.
+ */
+enum dfll_tune_range {
+	DFLL_TUNE_UNINITIALIZED = 0,
+	DFLL_TUNE_LOW = 1,
+};
+
+/**
+ * struct dfll_rate_req - target DFLL rate request data
+ * @rate: target frequency, after the postscaling
+ * @dvco_target_rate: target frequency, after the postscaling
+ * @lut_index: LUT index at which voltage the dvco_target_rate will be reached
+ * @mult_bits: value to program to the MULT bits of the DFLL_FREQ_REQ register
+ * @scale_bits: value to program to the SCALE bits of the DFLL_FREQ_REQ register
+ */
+struct dfll_rate_req {
+	unsigned long rate;
+	unsigned long dvco_target_rate;
+	int lut_index;
+	u8 mult_bits;
+	u8 scale_bits;
+};
+
+struct tegra_dfll {
+	struct device			*dev;
+	struct tegra_dfll_soc_data	*soc;
+
+	void __iomem			*base;
+	void __iomem			*i2c_base;
+	void __iomem			*i2c_controller_base;
+	void __iomem			*lut_base;
+
+	struct regulator		*vdd_reg;
+	struct clk			*soc_clk;
+	struct clk			*ref_clk;
+	struct clk			*i2c_clk;
+	struct clk			*dfll_clk;
+	struct reset_control		*dvco_rst;
+	unsigned long			ref_rate;
+	unsigned long			i2c_clk_rate;
+	unsigned long			dvco_rate_min;
+
+	enum dfll_ctrl_mode		mode;
+	enum dfll_tune_range		tune_range;
+	struct dentry			*debugfs_dir;
+	struct clk_hw			dfll_clk_hw;
+	const char			*output_clock_name;
+	struct dfll_rate_req		last_req;
+	unsigned long			last_unrounded_rate;
+
+	/* Parameters from DT */
+	u32				droop_ctrl;
+	u32				sample_rate;
+	u32				force_mode;
+	u32				cf;
+	u32				ci;
+	u32				cg;
+	bool				cg_scale;
+
+	/* I2C interface parameters */
+	u32				i2c_fs_rate;
+	u32				i2c_reg;
+	u32				i2c_slave_addr;
+
+	/* i2c_lut array entries are regulator framework selectors */
+	unsigned			i2c_lut[MAX_DFLL_VOLTAGES];
+	int				i2c_lut_size;
+	u8				lut_min, lut_max, lut_safe;
+};
+
+#define clk_hw_to_dfll(_hw) container_of(_hw, struct tegra_dfll, dfll_clk_hw)
+
+/* mode_name: map numeric DFLL modes to names for friendly console messages */
+static const char * const mode_name[] = {
+	[DFLL_UNINITIALIZED] = "uninitialized",
+	[DFLL_DISABLED] = "disabled",
+	[DFLL_OPEN_LOOP] = "open_loop",
+	[DFLL_CLOSED_LOOP] = "closed_loop",
+};
+
+/*
+ * Register accessors
+ */
+
+static inline u32 dfll_readl(struct tegra_dfll *td, u32 offs)
+{
+	return __raw_readl(td->base + offs);
+}
+
+static inline void dfll_writel(struct tegra_dfll *td, u32 val, u32 offs)
+{
+	WARN_ON(offs >= DFLL_I2C_CFG);
+	__raw_writel(val, td->base + offs);
+}
+
+static inline void dfll_wmb(struct tegra_dfll *td)
+{
+	dfll_readl(td, DFLL_CTRL);
+}
+
+/* I2C output control registers - for addresses above DFLL_I2C_CFG */
+
+static inline u32 dfll_i2c_readl(struct tegra_dfll *td, u32 offs)
+{
+	return __raw_readl(td->i2c_base + offs);
+}
+
+static inline void dfll_i2c_writel(struct tegra_dfll *td, u32 val, u32 offs)
+{
+	__raw_writel(val, td->i2c_base + offs);
+}
+
+static inline void dfll_i2c_wmb(struct tegra_dfll *td)
+{
+	dfll_i2c_readl(td, DFLL_I2C_CFG);
+}
+
+/**
+ * dfll_is_running - is the DFLL currently generating a clock?
+ * @td: DFLL instance
+ *
+ * If the DFLL is currently generating an output clock signal, return
+ * true; otherwise return false.
+ */
+static bool dfll_is_running(struct tegra_dfll *td)
+{
+	return td->mode >= DFLL_OPEN_LOOP;
+}
+
+/*
+ * Runtime PM suspend/resume callbacks
+ */
+
+/**
+ * tegra_dfll_runtime_resume - enable all clocks needed by the DFLL
+ * @dev: DFLL device *
+ *
+ * Enable all clocks needed by the DFLL. Assumes that clk_prepare()
+ * has already been called on all the clocks.
+ *
+ * XXX Should also handle context restore when returning from off.
+ */
+int tegra_dfll_runtime_resume(struct device *dev)
+{
+	struct tegra_dfll *td = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(td->ref_clk);
+	if (ret) {
+		dev_err(dev, "could not enable ref clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_enable(td->soc_clk);
+	if (ret) {
+		dev_err(dev, "could not enable register clock: %d\n", ret);
+		clk_disable(td->ref_clk);
+		return ret;
+	}
+
+	ret = clk_enable(td->i2c_clk);
+	if (ret) {
+		dev_err(dev, "could not enable i2c clock: %d\n", ret);
+		clk_disable(td->soc_clk);
+		clk_disable(td->ref_clk);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dfll_runtime_resume);
+
+/**
+ * tegra_dfll_runtime_suspend - disable all clocks needed by the DFLL
+ * @dev: DFLL device *
+ *
+ * Disable all clocks needed by the DFLL. Assumes that other code
+ * will later call clk_unprepare().
+ */
+int tegra_dfll_runtime_suspend(struct device *dev)
+{
+	struct tegra_dfll *td = dev_get_drvdata(dev);
+
+	clk_disable(td->ref_clk);
+	clk_disable(td->soc_clk);
+	clk_disable(td->i2c_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dfll_runtime_suspend);
+
+/*
+ * DFLL tuning operations (per-voltage-range tuning settings)
+ */
+
+/**
+ * dfll_tune_low - tune to DFLL and CPU settings valid for any voltage
+ * @td: DFLL instance
+ *
+ * Tune the DFLL oscillator parameters and the CPU clock shaper for
+ * the low-voltage range. These settings are valid for any voltage,
+ * but may not be optimal.
+ */
+static void dfll_tune_low(struct tegra_dfll *td)
+{
+	td->tune_range = DFLL_TUNE_LOW;
+
+	dfll_writel(td, td->soc->tune0_low, DFLL_TUNE0);
+	dfll_writel(td, td->soc->tune1, DFLL_TUNE1);
+	dfll_wmb(td);
+
+	if (td->soc->set_clock_trimmers_low)
+		td->soc->set_clock_trimmers_low();
+}
+
+/*
+ * Output clock scaler helpers
+ */
+
+/**
+ * dfll_scale_dvco_rate - calculate scaled rate from the DVCO rate
+ * @scale_bits: clock scaler value (bits in the DFLL_FREQ_REQ_SCALE field)
+ * @dvco_rate: the DVCO rate
+ *
+ * Apply the same scaling formula that the DFLL hardware uses to scale
+ * the DVCO rate.
+ */
+static unsigned long dfll_scale_dvco_rate(int scale_bits,
+					  unsigned long dvco_rate)
+{
+	return (u64)dvco_rate * (scale_bits + 1) / DFLL_FREQ_REQ_SCALE_MAX;
+}
+
+/*
+ * Monitor control
+ */
+
+/**
+ * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq
+ * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield
+ * @ref_rate: DFLL reference clock rate
+ *
+ * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles
+ * per second. Returns the converted value.
+ */
+static u64 dfll_calc_monitored_rate(u32 monitor_data,
+				    unsigned long ref_rate)
+{
+	return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE);
+}
+
+/**
+ * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor
+ * @td: DFLL instance
+ *
+ * If the DFLL is enabled, return the last rate reported by the DFLL's
+ * internal monitoring hardware. This works in both open-loop and
+ * closed-loop mode, and takes the output scaler setting into account.
+ * Assumes that the monitor was programmed to monitor frequency before
+ * the sample period started. If the driver believes that the DFLL is
+ * currently uninitialized or disabled, it will return 0, since
+ * otherwise the DFLL monitor data register will return the last
+ * measured rate from when the DFLL was active.
+ */
+static u64 dfll_read_monitor_rate(struct tegra_dfll *td)
+{
+	u32 v, s;
+	u64 pre_scaler_rate, post_scaler_rate;
+
+	if (!dfll_is_running(td))
+		return 0;
+
+	v = dfll_readl(td, DFLL_MONITOR_DATA);
+	v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT;
+	pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate);
+
+	s = dfll_readl(td, DFLL_FREQ_REQ);
+	s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT;
+	post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate);
+
+	return post_scaler_rate;
+}
+
+/*
+ * DFLL mode switching
+ */
+
+/**
+ * dfll_set_mode - change the DFLL control mode
+ * @td: DFLL instance
+ * @mode: DFLL control mode (see enum dfll_ctrl_mode)
+ *
+ * Change the DFLL's operating mode between disabled, open-loop mode,
+ * and closed-loop mode, or vice versa.
+ */
+static void dfll_set_mode(struct tegra_dfll *td,
+			  enum dfll_ctrl_mode mode)
+{
+	td->mode = mode;
+	dfll_writel(td, mode - 1, DFLL_CTRL);
+	dfll_wmb(td);
+}
+
+/*
+ * DFLL-to-I2C controller interface
+ */
+
+/**
+ * dfll_i2c_set_output_enabled - enable/disable I2C PMIC voltage requests
+ * @td: DFLL instance
+ * @enable: whether to enable or disable the I2C voltage requests
+ *
+ * Set the master enable control for I2C control value updates. If disabled,
+ * then I2C control messages are inhibited, regardless of the DFLL mode.
+ */
+static int dfll_i2c_set_output_enabled(struct tegra_dfll *td, bool enable)
+{
+	u32 val;
+
+	val = dfll_i2c_readl(td, DFLL_OUTPUT_CFG);
+
+	if (enable)
+		val |= DFLL_OUTPUT_CFG_I2C_ENABLE;
+	else
+		val &= ~DFLL_OUTPUT_CFG_I2C_ENABLE;
+
+	dfll_i2c_writel(td, val, DFLL_OUTPUT_CFG);
+	dfll_i2c_wmb(td);
+
+	return 0;
+}
+
+/**
+ * dfll_load_lut - load the voltage lookup table
+ * @td: struct tegra_dfll *
+ *
+ * Load the voltage-to-PMIC register value lookup table into the DFLL
+ * IP block memory. Look-up tables can be loaded at any time.
+ */
+static void dfll_load_i2c_lut(struct tegra_dfll *td)
+{
+	int i, lut_index;
+	u32 val;
+
+	for (i = 0; i < MAX_DFLL_VOLTAGES; i++) {
+		if (i < td->lut_min)
+			lut_index = td->lut_min;
+		else if (i > td->lut_max)
+			lut_index = td->lut_max;
+		else
+			lut_index = i;
+
+		val = regulator_list_hardware_vsel(td->vdd_reg,
+						     td->i2c_lut[lut_index]);
+		__raw_writel(val, td->lut_base + i * 4);
+	}
+
+	dfll_i2c_wmb(td);
+}
+
+/**
+ * dfll_init_i2c_if - set up the DFLL's DFLL-I2C interface
+ * @td: DFLL instance
+ *
+ * During DFLL driver initialization, program the DFLL-I2C interface
+ * with the PMU slave address, vdd register offset, and transfer mode.
+ * This data is used by the DFLL to automatically construct I2C
+ * voltage-set commands, which are then passed to the DFLL's internal
+ * I2C controller.
+ */
+static void dfll_init_i2c_if(struct tegra_dfll *td)
+{
+	u32 val;
+
+	if (td->i2c_slave_addr > 0x7f) {
+		val = td->i2c_slave_addr << DFLL_I2C_CFG_SLAVE_ADDR_SHIFT_10BIT;
+		val |= DFLL_I2C_CFG_SLAVE_ADDR_10;
+	} else {
+		val = td->i2c_slave_addr << DFLL_I2C_CFG_SLAVE_ADDR_SHIFT_7BIT;
+	}
+	val |= DFLL_I2C_CFG_SIZE_MASK;
+	val |= DFLL_I2C_CFG_ARB_ENABLE;
+	dfll_i2c_writel(td, val, DFLL_I2C_CFG);
+
+	dfll_i2c_writel(td, td->i2c_reg, DFLL_I2C_VDD_REG_ADDR);
+
+	val = DIV_ROUND_UP(td->i2c_clk_rate, td->i2c_fs_rate * 8);
+	BUG_ON(!val || (val > DFLL_I2C_CLK_DIVISOR_MASK));
+	val = (val - 1) << DFLL_I2C_CLK_DIVISOR_FS_SHIFT;
+
+	/* default hs divisor just in case */
+	val |= 1 << DFLL_I2C_CLK_DIVISOR_HS_SHIFT;
+	__raw_writel(val, td->i2c_controller_base + DFLL_I2C_CLK_DIVISOR);
+	dfll_i2c_wmb(td);
+}
+
+/**
+ * dfll_init_out_if - prepare DFLL-to-PMIC interface
+ * @td: DFLL instance
+ *
+ * During DFLL driver initialization or resume from context loss,
+ * disable the I2C command output to the PMIC, set safe voltage and
+ * output limits, and disable and clear limit interrupts.
+ */
+static void dfll_init_out_if(struct tegra_dfll *td)
+{
+	u32 val;
+
+	td->lut_min = 0;
+	td->lut_max = td->i2c_lut_size - 1;
+	td->lut_safe = td->lut_min + 1;
+
+	dfll_i2c_writel(td, 0, DFLL_OUTPUT_CFG);
+	val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
+		(td->lut_max << DFLL_OUTPUT_CFG_MAX_SHIFT) |
+		(td->lut_min << DFLL_OUTPUT_CFG_MIN_SHIFT);
+	dfll_i2c_writel(td, val, DFLL_OUTPUT_CFG);
+	dfll_i2c_wmb(td);
+
+	dfll_writel(td, 0, DFLL_OUTPUT_FORCE);
+	dfll_i2c_writel(td, 0, DFLL_INTR_EN);
+	dfll_i2c_writel(td, DFLL_INTR_MAX_MASK | DFLL_INTR_MIN_MASK,
+			DFLL_INTR_STS);
+
+	dfll_load_i2c_lut(td);
+	dfll_init_i2c_if(td);
+}
+
+/*
+ * Set/get the DFLL's targeted output clock rate
+ */
+
+/**
+ * find_lut_index_for_rate - determine I2C LUT index for given DFLL rate
+ * @td: DFLL instance
+ * @rate: clock rate
+ *
+ * Determines the index of a I2C LUT entry for a voltage that approximately
+ * produces the given DFLL clock rate. This is used when forcing a value
+ * to the integrator during rate changes. Returns -ENOENT if a suitable
+ * LUT index is not found.
+ */
+static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
+{
+	struct dev_pm_opp *opp;
+	int i, uv;
+
+	opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
+	uv = dev_pm_opp_get_voltage(opp);
+
+	for (i = 0; i < td->i2c_lut_size; i++) {
+		if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
+			return i;
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * dfll_calculate_rate_request - calculate DFLL parameters for a given rate
+ * @td: DFLL instance
+ * @req: DFLL-rate-request structure
+ * @rate: the desired DFLL rate
+ *
+ * Populate the DFLL-rate-request record @req fields with the scale_bits
+ * and mult_bits fields, based on the target input rate. Returns 0 upon
+ * success, or -EINVAL if the requested rate in req->rate is too high
+ * or low for the DFLL to generate.
+ */
+static int dfll_calculate_rate_request(struct tegra_dfll *td,
+				       struct dfll_rate_req *req,
+				       unsigned long rate)
+{
+	u32 val;
+
+	/*
+	 * If requested rate is below the minimum DVCO rate, active the scaler.
+	 * In the future the DVCO minimum voltage should be selected based on
+	 * chip temperature and the actual minimum rate should be calibrated
+	 * at runtime.
+	 */
+	req->scale_bits = DFLL_FREQ_REQ_SCALE_MAX - 1;
+	if (rate < td->dvco_rate_min) {
+		int scale;
+
+		scale = DIV_ROUND_CLOSEST(rate / 1000 * DFLL_FREQ_REQ_SCALE_MAX,
+					  td->dvco_rate_min / 1000);
+		if (!scale) {
+			dev_err(td->dev, "%s: Rate %lu is too low\n",
+				__func__, rate);
+			return -EINVAL;
+		}
+		req->scale_bits = scale - 1;
+		rate = td->dvco_rate_min;
+	}
+
+	/* Convert requested rate into frequency request and scale settings */
+	val = DVCO_RATE_TO_MULT(rate, td->ref_rate);
+	if (val > FREQ_MAX) {
+		dev_err(td->dev, "%s: Rate %lu is above dfll range\n",
+			__func__, rate);
+		return -EINVAL;
+	}
+	req->mult_bits = val;
+	req->dvco_target_rate = MULT_TO_DVCO_RATE(req->mult_bits, td->ref_rate);
+	req->rate = dfll_scale_dvco_rate(req->scale_bits,
+					 req->dvco_target_rate);
+	req->lut_index = find_lut_index_for_rate(td, req->dvco_target_rate);
+	if (req->lut_index < 0)
+		return req->lut_index;
+
+	return 0;
+}
+
+/**
+ * dfll_set_frequency_request - start the frequency change operation
+ * @td: DFLL instance
+ * @req: rate request structure
+ *
+ * Tell the DFLL to try to change its output frequency to the
+ * frequency represented by @req. DFLL must be in closed-loop mode.
+ */
+static void dfll_set_frequency_request(struct tegra_dfll *td,
+				       struct dfll_rate_req *req)
+{
+	u32 val = 0;
+	int force_val;
+	int coef = 128; /* FIXME: td->cg_scale? */;
+
+	force_val = (req->lut_index - td->lut_safe) * coef / td->cg;
+	force_val = clamp(force_val, FORCE_MIN, FORCE_MAX);
+
+	val |= req->mult_bits << DFLL_FREQ_REQ_MULT_SHIFT;
+	val |= req->scale_bits << DFLL_FREQ_REQ_SCALE_SHIFT;
+	val |= ((u32)force_val << DFLL_FREQ_REQ_FORCE_SHIFT) &
+		DFLL_FREQ_REQ_FORCE_MASK;
+	val |= DFLL_FREQ_REQ_FREQ_VALID | DFLL_FREQ_REQ_FORCE_ENABLE;
+
+	dfll_writel(td, val, DFLL_FREQ_REQ);
+	dfll_wmb(td);
+}
+
+/**
+ * tegra_dfll_request_rate - set the next rate for the DFLL to tune to
+ * @td: DFLL instance
+ * @rate: clock rate to target
+ *
+ * Convert the requested clock rate @rate into the DFLL control logic
+ * settings. In closed-loop mode, update new settings immediately to
+ * adjust DFLL output rate accordingly. Otherwise, just save them
+ * until the next switch to closed loop. Returns 0 upon success,
+ * -EPERM if the DFLL driver has not yet been initialized, or -EINVAL
+ * if @rate is outside the DFLL's tunable range.
+ */
+static int dfll_request_rate(struct tegra_dfll *td, unsigned long rate)
+{
+	int ret;
+	struct dfll_rate_req req;
+
+	if (td->mode == DFLL_UNINITIALIZED) {
+		dev_err(td->dev, "%s: Cannot set DFLL rate in %s mode\n",
+			__func__, mode_name[td->mode]);
+		return -EPERM;
+	}
+
+	ret = dfll_calculate_rate_request(td, &req, rate);
+	if (ret)
+		return ret;
+
+	td->last_unrounded_rate = rate;
+	td->last_req = req;
+
+	if (td->mode == DFLL_CLOSED_LOOP)
+		dfll_set_frequency_request(td, &td->last_req);
+
+	return 0;
+}
+
+/*
+ * DFLL enable/disable & open-loop <-> closed-loop transitions
+ */
+
+/**
+ * dfll_disable - switch from open-loop mode to disabled mode
+ * @td: DFLL instance
+ *
+ * Switch from OPEN_LOOP state to DISABLED state. Returns 0 upon success
+ * or -EPERM if the DFLL is not currently in open-loop mode.
+ */
+static int dfll_disable(struct tegra_dfll *td)
+{
+	if (td->mode != DFLL_OPEN_LOOP) {
+		dev_err(td->dev, "cannot disable DFLL in %s mode\n",
+			mode_name[td->mode]);
+		return -EINVAL;
+	}
+
+	dfll_set_mode(td, DFLL_DISABLED);
+	pm_runtime_put_sync(td->dev);
+
+	return 0;
+}
+
+/**
+ * dfll_enable - switch a disabled DFLL to open-loop mode
+ * @td: DFLL instance
+ *
+ * Switch from DISABLED state to OPEN_LOOP state. Returns 0 upon success
+ * or -EPERM if the DFLL is not currently disabled.
+ */
+static int dfll_enable(struct tegra_dfll *td)
+{
+	if (td->mode != DFLL_DISABLED) {
+		dev_err(td->dev, "cannot enable DFLL in %s mode\n",
+			mode_name[td->mode]);
+		return -EPERM;
+	}
+
+	pm_runtime_get_sync(td->dev);
+	dfll_set_mode(td, DFLL_OPEN_LOOP);
+
+	return 0;
+}
+
+/**
+ * dfll_set_open_loop_config - prepare to switch to open-loop mode
+ * @td: DFLL instance
+ *
+ * Prepare to switch the DFLL to open-loop mode. This switches the
+ * DFLL to the low-voltage tuning range, ensures that I2C output
+ * forcing is disabled, and disables the output clock rate scaler.
+ * The DFLL's low-voltage tuning range parameters must be
+ * characterized to keep the downstream device stable at any DVCO
+ * input voltage. No return value.
+ */
+static void dfll_set_open_loop_config(struct tegra_dfll *td)
+{
+	u32 val;
+
+	/* always tune low (safe) in open loop */
+	if (td->tune_range != DFLL_TUNE_LOW)
+		dfll_tune_low(td);
+
+	val = dfll_readl(td, DFLL_FREQ_REQ);
+	val |= DFLL_FREQ_REQ_SCALE_MASK;
+	val &= ~DFLL_FREQ_REQ_FORCE_ENABLE;
+	dfll_writel(td, val, DFLL_FREQ_REQ);
+	dfll_wmb(td);
+}
+
+/**
+ * tegra_dfll_lock - switch from open-loop to closed-loop mode
+ * @td: DFLL instance
+ *
+ * Switch from OPEN_LOOP state to CLOSED_LOOP state. Returns 0 upon success,
+ * -EINVAL if the DFLL's target rate hasn't been set yet, or -EPERM if the
+ * DFLL is not currently in open-loop mode.
+ */
+static int dfll_lock(struct tegra_dfll *td)
+{
+	struct dfll_rate_req *req = &td->last_req;
+
+	switch (td->mode) {
+	case DFLL_CLOSED_LOOP:
+		return 0;
+
+	case DFLL_OPEN_LOOP:
+		if (req->rate == 0) {
+			dev_err(td->dev, "%s: Cannot lock DFLL at rate 0\n",
+				__func__);
+			return -EINVAL;
+		}
+
+		dfll_i2c_set_output_enabled(td, true);
+		dfll_set_mode(td, DFLL_CLOSED_LOOP);
+		dfll_set_frequency_request(td, req);
+		return 0;
+
+	default:
+		BUG_ON(td->mode > DFLL_CLOSED_LOOP);
+		dev_err(td->dev, "%s: Cannot lock DFLL in %s mode\n",
+			__func__, mode_name[td->mode]);
+		return -EPERM;
+	}
+}
+
+/**
+ * tegra_dfll_unlock - switch from closed-loop to open-loop mode
+ * @td: DFLL instance
+ *
+ * Switch from CLOSED_LOOP state to OPEN_LOOP state. Returns 0 upon success,
+ * or -EPERM if the DFLL is not currently in open-loop mode.
+ */
+static int dfll_unlock(struct tegra_dfll *td)
+{
+	switch (td->mode) {
+	case DFLL_CLOSED_LOOP:
+		dfll_set_open_loop_config(td);
+		dfll_set_mode(td, DFLL_OPEN_LOOP);
+		dfll_i2c_set_output_enabled(td, false);
+		return 0;
+
+	case DFLL_OPEN_LOOP:
+		return 0;
+
+	default:
+		BUG_ON(td->mode > DFLL_CLOSED_LOOP);
+		dev_err(td->dev, "%s: Cannot unlock DFLL in %s mode\n",
+			__func__, mode_name[td->mode]);
+		return -EPERM;
+	}
+}
+
+/*
+ * Clock framework integration
+ *
+ * When the DFLL is being controlled by the CCF, always enter closed loop
+ * mode when the clk is enabled. This requires that a DFLL rate request
+ * has been set beforehand, which implies that a clk_set_rate() call is
+ * always required before a clk_enable().
+ */
+
+static int dfll_clk_is_enabled(struct clk_hw *hw)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+
+	return dfll_is_running(td);
+}
+
+static int dfll_clk_enable(struct clk_hw *hw)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+	int ret;
+
+	ret = dfll_enable(td);
+	if (ret)
+		return ret;
+
+	ret = dfll_lock(td);
+	if (ret)
+		dfll_disable(td);
+
+	return ret;
+}
+
+static void dfll_clk_disable(struct clk_hw *hw)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+	int ret;
+
+	ret = dfll_unlock(td);
+	if (!ret)
+		dfll_disable(td);
+}
+
+static unsigned long dfll_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+
+	return td->last_unrounded_rate;
+}
+
+static long dfll_clk_round_rate(struct clk_hw *hw,
+				unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+	struct dfll_rate_req req;
+	int ret;
+
+	ret = dfll_calculate_rate_request(td, &req, rate);
+	if (ret)
+		return ret;
+
+	/*
+	 * Don't return the rounded rate, since it doesn't really matter as
+	 * the output rate will be voltage controlled anyway, and cpufreq
+	 * freaks out if any rounding happens.
+	 */
+	return rate;
+}
+
+static int dfll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct tegra_dfll *td = clk_hw_to_dfll(hw);
+
+	return dfll_request_rate(td, rate);
+}
+
+static const struct clk_ops dfll_clk_ops = {
+	.is_enabled	= dfll_clk_is_enabled,
+	.enable		= dfll_clk_enable,
+	.disable	= dfll_clk_disable,
+	.recalc_rate	= dfll_clk_recalc_rate,
+	.round_rate	= dfll_clk_round_rate,
+	.set_rate	= dfll_clk_set_rate,
+};
+
+static struct clk_init_data dfll_clk_init_data = {
+	.flags		= CLK_IS_ROOT,
+	.ops		= &dfll_clk_ops,
+	.num_parents	= 0,
+};
+
+/**
+ * dfll_register_clk - register the DFLL output clock with the clock framework
+ * @td: DFLL instance
+ *
+ * Register the DFLL's output clock with the Linux clock framework and register
+ * the DFLL driver as an OF clock provider. Returns 0 upon success or -EINVAL
+ * or -ENOMEM upon failure.
+ */
+static int dfll_register_clk(struct tegra_dfll *td)
+{
+	int ret;
+
+	dfll_clk_init_data.name = td->output_clock_name;
+	td->dfll_clk_hw.init = &dfll_clk_init_data;
+
+	td->dfll_clk = clk_register(td->dev, &td->dfll_clk_hw);
+	if (IS_ERR(td->dfll_clk)) {
+		dev_err(td->dev, "DFLL clock registration error\n");
+		return -EINVAL;
+	}
+
+	ret = of_clk_add_provider(td->dev->of_node, of_clk_src_simple_get,
+				  td->dfll_clk);
+	if (ret) {
+		dev_err(td->dev, "of_clk_add_provider() failed\n");
+
+		clk_unregister(td->dfll_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * dfll_unregister_clk - unregister the DFLL output clock
+ * @td: DFLL instance
+ *
+ * Unregister the DFLL's output clock from the Linux clock framework
+ * and from clkdev. No return value.
+ */
+static void dfll_unregister_clk(struct tegra_dfll *td)
+{
+	of_clk_del_provider(td->dev->of_node);
+	clk_unregister(td->dfll_clk);
+	td->dfll_clk = NULL;
+}
+
+/*
+ * Debugfs interface
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int attr_enable_get(void *data, u64 *val)
+{
+	struct tegra_dfll *td = data;
+
+	*val = dfll_is_running(td);
+
+	return 0;
+}
+static int attr_enable_set(void *data, u64 val)
+{
+	struct tegra_dfll *td = data;
+
+	return val ? dfll_enable(td) : dfll_disable(td);
+}
+DEFINE_SIMPLE_ATTRIBUTE(enable_fops, attr_enable_get, attr_enable_set,
+			"%llu\n");
+
+static int attr_lock_get(void *data, u64 *val)
+{
+	struct tegra_dfll *td = data;
+
+	*val = (td->mode == DFLL_CLOSED_LOOP);
+
+	return 0;
+}
+static int attr_lock_set(void *data, u64 val)
+{
+	struct tegra_dfll *td = data;
+
+	return val ? dfll_lock(td) :  dfll_unlock(td);
+}
+DEFINE_SIMPLE_ATTRIBUTE(lock_fops, attr_lock_get, attr_lock_set,
+			"%llu\n");
+
+static int attr_rate_get(void *data, u64 *val)
+{
+	struct tegra_dfll *td = data;
+
+	*val = dfll_read_monitor_rate(td);
+
+	return 0;
+}
+
+static int attr_rate_set(void *data, u64 val)
+{
+	struct tegra_dfll *td = data;
+
+	return dfll_request_rate(td, val);
+}
+DEFINE_SIMPLE_ATTRIBUTE(rate_fops, attr_rate_get, attr_rate_set, "%llu\n");
+
+static int attr_registers_show(struct seq_file *s, void *data)
+{
+	u32 val, offs;
+	struct tegra_dfll *td = s->private;
+
+	seq_puts(s, "CONTROL REGISTERS:\n");
+	for (offs = 0; offs <= DFLL_MONITOR_DATA; offs += 4) {
+		if (offs == DFLL_OUTPUT_CFG)
+			val = dfll_i2c_readl(td, offs);
+		else
+			val = dfll_readl(td, offs);
+		seq_printf(s, "[0x%02x] = 0x%08x\n", offs, val);
+	}
+
+	seq_puts(s, "\nI2C and INTR REGISTERS:\n");
+	for (offs = DFLL_I2C_CFG; offs <= DFLL_I2C_STS; offs += 4)
+		seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
+			   dfll_i2c_readl(td, offs));
+	for (offs = DFLL_INTR_STS; offs <= DFLL_INTR_EN; offs += 4)
+		seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
+			   dfll_i2c_readl(td, offs));
+
+	seq_puts(s, "\nINTEGRATED I2C CONTROLLER REGISTERS:\n");
+	offs = DFLL_I2C_CLK_DIVISOR;
+	seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
+		   __raw_readl(td->i2c_controller_base + offs));
+
+	seq_puts(s, "\nLUT:\n");
+	for (offs = 0; offs <  4 * MAX_DFLL_VOLTAGES; offs += 4)
+		seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
+			   __raw_readl(td->lut_base + offs));
+
+	return 0;
+}
+
+static int attr_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, attr_registers_show, inode->i_private);
+}
+
+static const struct file_operations attr_registers_fops = {
+	.open		= attr_registers_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int dfll_debug_init(struct tegra_dfll *td)
+{
+	int ret;
+
+	if (!td || (td->mode == DFLL_UNINITIALIZED))
+		return 0;
+
+	td->debugfs_dir = debugfs_create_dir("tegra_dfll_fcpu", NULL);
+	if (!td->debugfs_dir)
+		return -ENOMEM;
+
+	ret = -ENOMEM;
+
+	if (!debugfs_create_file("enable", S_IRUGO | S_IWUSR,
+				 td->debugfs_dir, td, &enable_fops))
+		goto err_out;
+
+	if (!debugfs_create_file("lock", S_IRUGO,
+				 td->debugfs_dir, td, &lock_fops))
+		goto err_out;
+
+	if (!debugfs_create_file("rate", S_IRUGO,
+				 td->debugfs_dir, td, &rate_fops))
+		goto err_out;
+
+	if (!debugfs_create_file("registers", S_IRUGO,
+				 td->debugfs_dir, td, &attr_registers_fops))
+		goto err_out;
+
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(td->debugfs_dir);
+	return ret;
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * DFLL initialization
+ */
+
+/**
+ * dfll_set_default_params - program non-output related DFLL parameters
+ * @td: DFLL instance
+ *
+ * During DFLL driver initialization or resume from context loss,
+ * program parameters for the closed loop integrator, DVCO tuning,
+ * voltage droop control and monitor control.
+ */
+static void dfll_set_default_params(struct tegra_dfll *td)
+{
+	u32 val;
+
+	val = DIV_ROUND_UP(td->ref_rate, td->sample_rate * 32);
+	BUG_ON(val > DFLL_CONFIG_DIV_MASK);
+	dfll_writel(td, val, DFLL_CONFIG);
+
+	val = (td->force_mode << DFLL_PARAMS_FORCE_MODE_SHIFT) |
+		(td->cf << DFLL_PARAMS_CF_PARAM_SHIFT) |
+		(td->ci << DFLL_PARAMS_CI_PARAM_SHIFT) |
+		(td->cg << DFLL_PARAMS_CG_PARAM_SHIFT) |
+		(td->cg_scale ? DFLL_PARAMS_CG_SCALE : 0);
+	dfll_writel(td, val, DFLL_PARAMS);
+
+	dfll_tune_low(td);
+	dfll_writel(td, td->droop_ctrl, DFLL_DROOP_CTRL);
+	dfll_writel(td, DFLL_MONITOR_CTRL_FREQ, DFLL_MONITOR_CTRL);
+}
+
+/**
+ * dfll_init_clks - clk_get() the DFLL source clocks
+ * @td: DFLL instance
+ *
+ * Call clk_get() on the DFLL source clocks and save the pointers for later
+ * use. Returns 0 upon success or error (see devm_clk_get) if one or more
+ * of the clocks couldn't be looked up.
+ */
+static int dfll_init_clks(struct tegra_dfll *td)
+{
+	td->ref_clk = devm_clk_get(td->dev, "ref");
+	if (IS_ERR(td->ref_clk)) {
+		dev_err(td->dev, "missing ref clock\n");
+		return PTR_ERR(td->ref_clk);
+	}
+
+	td->soc_clk = devm_clk_get(td->dev, "soc");
+	if (IS_ERR(td->soc_clk)) {
+		dev_err(td->dev, "missing soc clock\n");
+		return PTR_ERR(td->soc_clk);
+	}
+
+	td->i2c_clk = devm_clk_get(td->dev, "i2c");
+	if (IS_ERR(td->i2c_clk)) {
+		dev_err(td->dev, "missing i2c clock\n");
+		return PTR_ERR(td->i2c_clk);
+	}
+	td->i2c_clk_rate = clk_get_rate(td->i2c_clk);
+
+	return 0;
+}
+
+/**
+ * dfll_init - Prepare the DFLL IP block for use
+ * @td: DFLL instance
+ *
+ * Do everything necessary to prepare the DFLL IP block for use. The
+ * DFLL will be left in DISABLED state. Called by dfll_probe().
+ * Returns 0 upon success, or passes along the error from whatever
+ * function returned it.
+ */
+static int dfll_init(struct tegra_dfll *td)
+{
+	int ret;
+
+	td->ref_rate = clk_get_rate(td->ref_clk);
+	if (td->ref_rate != REF_CLOCK_RATE) {
+		dev_err(td->dev, "unexpected ref clk rate %lu, expecting %lu",
+			td->ref_rate, REF_CLOCK_RATE);
+		return -EINVAL;
+	}
+
+	reset_control_deassert(td->dvco_rst);
+
+	ret = clk_prepare(td->ref_clk);
+	if (ret) {
+		dev_err(td->dev, "failed to prepare ref_clk\n");
+		return ret;
+	}
+
+	ret = clk_prepare(td->soc_clk);
+	if (ret) {
+		dev_err(td->dev, "failed to prepare soc_clk\n");
+		goto di_err1;
+	}
+
+	ret = clk_prepare(td->i2c_clk);
+	if (ret) {
+		dev_err(td->dev, "failed to prepare i2c_clk\n");
+		goto di_err2;
+	}
+
+	td->last_unrounded_rate = 0;
+
+	pm_runtime_enable(td->dev);
+	pm_runtime_get_sync(td->dev);
+
+	dfll_set_mode(td, DFLL_DISABLED);
+	dfll_set_default_params(td);
+
+	if (td->soc->init_clock_trimmers)
+		td->soc->init_clock_trimmers();
+
+	dfll_set_open_loop_config(td);
+
+	dfll_init_out_if(td);
+
+	pm_runtime_put_sync(td->dev);
+
+	return 0;
+
+di_err2:
+	clk_unprepare(td->soc_clk);
+di_err1:
+	clk_unprepare(td->ref_clk);
+
+	reset_control_assert(td->dvco_rst);
+
+	return ret;
+}
+
+/*
+ * DT data fetch
+ */
+
+/*
+ * Find a PMIC voltage register-to-voltage mapping for the given voltage.
+ * An exact voltage match is required.
+ */
+static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
+{
+	int i, n_voltages, reg_uV;
+
+	n_voltages = regulator_count_voltages(td->vdd_reg);
+	for (i = 0; i < n_voltages; i++) {
+		reg_uV = regulator_list_voltage(td->vdd_reg, i);
+		if (reg_uV < 0)
+			break;
+
+		if (uV == reg_uV)
+			return i;
+	}
+
+	dev_err(td->dev, "no voltage map entry for %d uV\n", uV);
+	return -EINVAL;
+}
+
+/*
+ * Find a PMIC voltage register-to-voltage mapping for the given voltage,
+ * rounding up to the closest supported voltage.
+ * */
+static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
+{
+	int i, n_voltages, reg_uV;
+
+	n_voltages = regulator_count_voltages(td->vdd_reg);
+	for (i = 0; i < n_voltages; i++) {
+		reg_uV = regulator_list_voltage(td->vdd_reg, i);
+		if (reg_uV < 0)
+			break;
+
+		if (uV <= reg_uV)
+			return i;
+	}
+
+	dev_err(td->dev, "no voltage map entry rounding to %d uV\n", uV);
+	return -EINVAL;
+}
+
+/**
+ * dfll_build_i2c_lut - build the I2C voltage register lookup table
+ * @td: DFLL instance
+ *
+ * The DFLL hardware has 33 bytes of look-up table RAM that must be filled with
+ * PMIC voltage register values that span the entire DFLL operating range.
+ * This function builds the look-up table based on the OPP table provided by
+ * the soc-specific platform driver (td->soc->opp_dev) and the PMIC
+ * register-to-voltage mapping queried from the regulator framework.
+ *
+ * On success, fills in td->i2c_lut and returns 0, or -err on failure.
+ */
+static int dfll_build_i2c_lut(struct tegra_dfll *td)
+{
+	int ret = -EINVAL;
+	int j, v, v_max, v_opp;
+	int selector;
+	unsigned long rate;
+	struct dev_pm_opp *opp;
+	int lut;
+
+	rcu_read_lock();
+
+	rate = ULONG_MAX;
+	opp = dev_pm_opp_find_freq_floor(td->soc->dev, &rate);
+	if (IS_ERR(opp)) {
+		dev_err(td->dev, "couldn't get vmax opp, empty opp table?\n");
+		goto out;
+	}
+	v_max = dev_pm_opp_get_voltage(opp);
+
+	v = td->soc->min_millivolts * 1000;
+	lut = find_vdd_map_entry_exact(td, v);
+	if (lut < 0)
+		goto out;
+	td->i2c_lut[0] = lut;
+
+	for (j = 1, rate = 0; ; rate++) {
+		opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
+		if (IS_ERR(opp))
+			break;
+		v_opp = dev_pm_opp_get_voltage(opp);
+
+		if (v_opp <= td->soc->min_millivolts * 1000)
+			td->dvco_rate_min = dev_pm_opp_get_freq(opp);
+
+		for (;;) {
+			v += max(1, (v_max - v) / (MAX_DFLL_VOLTAGES - j));
+			if (v >= v_opp)
+				break;
+
+			selector = find_vdd_map_entry_min(td, v);
+			if (selector < 0)
+				goto out;
+			if (selector != td->i2c_lut[j - 1])
+				td->i2c_lut[j++] = selector;
+		}
+
+		v = (j == MAX_DFLL_VOLTAGES - 1) ? v_max : v_opp;
+		selector = find_vdd_map_entry_exact(td, v);
+		if (selector < 0)
+			goto out;
+		if (selector != td->i2c_lut[j - 1])
+			td->i2c_lut[j++] = selector;
+
+		if (v >= v_max)
+			break;
+	}
+	td->i2c_lut_size = j;
+
+	if (!td->dvco_rate_min)
+		dev_err(td->dev, "no opp above DFLL minimum voltage %d mV\n",
+			td->soc->min_millivolts);
+	else
+		ret = 0;
+
+out:
+	rcu_read_unlock();
+
+	return ret;
+}
+
+/**
+ * read_dt_param - helper function for reading required parameters from the DT
+ * @td: DFLL instance
+ * @param: DT property name
+ * @dest: output pointer for the value read
+ *
+ * Read a required numeric parameter from the DFLL device node, or complain
+ * if the property doesn't exist. Returns a boolean indicating success for
+ * easy chaining of multiple calls to this function.
+ */
+static bool read_dt_param(struct tegra_dfll *td, const char *param, u32 *dest)
+{
+	int err = of_property_read_u32(td->dev->of_node, param, dest);
+
+	if (err < 0) {
+		dev_err(td->dev, "failed to read DT parameter %s: %d\n",
+			param, err);
+		return false;
+	}
+
+	return true;
+}
+
+/**
+ * dfll_fetch_i2c_params - query PMIC I2C params from DT & regulator subsystem
+ * @td: DFLL instance
+ *
+ * Read all the parameters required for operation in I2C mode. The parameters
+ * can originate from the device tree or the regulator subsystem.
+ * Returns 0 on success or -err on failure.
+ */
+static int dfll_fetch_i2c_params(struct tegra_dfll *td)
+{
+	struct regmap *regmap;
+	struct device *i2c_dev;
+	struct i2c_client *i2c_client;
+	int vsel_reg, vsel_mask;
+	int ret;
+
+	if (!read_dt_param(td, "nvidia,i2c-fs-rate", &td->i2c_fs_rate))
+		return -EINVAL;
+
+	regmap = regulator_get_regmap(td->vdd_reg);
+	i2c_dev = regmap_get_device(regmap);
+	i2c_client = to_i2c_client(i2c_dev);
+
+	td->i2c_slave_addr = i2c_client->addr;
+
+	ret = regulator_get_hardware_vsel_register(td->vdd_reg,
+						   &vsel_reg,
+						   &vsel_mask);
+	if (ret < 0) {
+		dev_err(td->dev,
+			"regulator unsuitable for DFLL I2C operation\n");
+		return -EINVAL;
+	}
+	td->i2c_reg = vsel_reg;
+
+	ret = dfll_build_i2c_lut(td);
+	if (ret) {
+		dev_err(td->dev, "couldn't build I2C LUT\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * dfll_fetch_common_params - read DFLL parameters from the device tree
+ * @td: DFLL instance
+ *
+ * Read all the DT parameters that are common to both I2C and PWM operation.
+ * Returns 0 on success or -EINVAL on any failure.
+ */
+static int dfll_fetch_common_params(struct tegra_dfll *td)
+{
+	bool ok = true;
+
+	ok &= read_dt_param(td, "nvidia,droop-ctrl", &td->droop_ctrl);
+	ok &= read_dt_param(td, "nvidia,sample-rate", &td->sample_rate);
+	ok &= read_dt_param(td, "nvidia,force-mode", &td->force_mode);
+	ok &= read_dt_param(td, "nvidia,cf", &td->cf);
+	ok &= read_dt_param(td, "nvidia,ci", &td->ci);
+	ok &= read_dt_param(td, "nvidia,cg", &td->cg);
+	td->cg_scale = of_property_read_bool(td->dev->of_node,
+					     "nvidia,cg-scale");
+
+	if (of_property_read_string(td->dev->of_node, "clock-output-names",
+				    &td->output_clock_name)) {
+		dev_err(td->dev, "missing clock-output-names property\n");
+		ok = false;
+	}
+
+	return ok ? 0 : -EINVAL;
+}
+
+/*
+ * API exported to per-SoC platform drivers
+ */
+
+/**
+ * tegra_dfll_register - probe a Tegra DFLL device
+ * @pdev: DFLL platform_device *
+ * @soc: Per-SoC integration and characterization data for this DFLL instance
+ *
+ * Probe and initialize a DFLL device instance. Intended to be called
+ * by a SoC-specific shim driver that passes in per-SoC integration
+ * and configuration data via @soc. Returns 0 on success or -err on failure.
+ */
+int tegra_dfll_register(struct platform_device *pdev,
+			struct tegra_dfll_soc_data *soc)
+{
+	struct resource *mem;
+	struct tegra_dfll *td;
+	int ret;
+
+	if (!soc) {
+		dev_err(&pdev->dev, "no tegra_dfll_soc_data provided\n");
+		return -EINVAL;
+	}
+
+	td = devm_kzalloc(&pdev->dev, sizeof(*td), GFP_KERNEL);
+	if (!td)
+		return -ENOMEM;
+	td->dev = &pdev->dev;
+	platform_set_drvdata(pdev, td);
+
+	td->soc = soc;
+
+	td->vdd_reg = devm_regulator_get(td->dev, "vdd-cpu");
+	if (IS_ERR(td->vdd_reg)) {
+		dev_err(td->dev, "couldn't get vdd_cpu regulator\n");
+		return PTR_ERR(td->vdd_reg);
+	}
+
+	td->dvco_rst = devm_reset_control_get(td->dev, "dvco");
+	if (IS_ERR(td->dvco_rst)) {
+		dev_err(td->dev, "couldn't get dvco reset\n");
+		return PTR_ERR(td->dvco_rst);
+	}
+
+	ret = dfll_fetch_common_params(td);
+	if (ret) {
+		dev_err(td->dev, "couldn't parse device tree parameters\n");
+		return ret;
+	}
+
+	ret = dfll_fetch_i2c_params(td);
+	if (ret)
+		return ret;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(td->dev, "no control register resource\n");
+		return -ENODEV;
+	}
+
+	td->base = devm_ioremap(td->dev, mem->start, resource_size(mem));
+	if (!td->base) {
+		dev_err(td->dev, "couldn't ioremap DFLL control registers\n");
+		return -ENODEV;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		dev_err(td->dev, "no i2c_base resource\n");
+		return -ENODEV;
+	}
+
+	td->i2c_base = devm_ioremap(td->dev, mem->start, resource_size(mem));
+	if (!td->i2c_base) {
+		dev_err(td->dev, "couldn't ioremap i2c_base resource\n");
+		return -ENODEV;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!mem) {
+		dev_err(td->dev, "no i2c_controller_base resource\n");
+		return -ENODEV;
+	}
+
+	td->i2c_controller_base = devm_ioremap(td->dev, mem->start,
+					       resource_size(mem));
+	if (!td->i2c_controller_base) {
+		dev_err(td->dev,
+			"couldn't ioremap i2c_controller_base resource\n");
+		return -ENODEV;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	if (!mem) {
+		dev_err(td->dev, "no lut_base resource\n");
+		return -ENODEV;
+	}
+
+	td->lut_base = devm_ioremap(td->dev, mem->start, resource_size(mem));
+	if (!td->lut_base) {
+		dev_err(td->dev,
+			"couldn't ioremap lut_base resource\n");
+		return -ENODEV;
+	}
+
+	ret = dfll_init_clks(td);
+	if (ret) {
+		dev_err(&pdev->dev, "DFLL clock init error\n");
+		return ret;
+	}
+
+	/* Enable the clocks and set the device up */
+	ret = dfll_init(td);
+	if (ret)
+		return ret;
+
+	ret = dfll_register_clk(td);
+	if (ret) {
+		dev_err(&pdev->dev, "DFLL clk registration failed\n");
+		return ret;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	dfll_debug_init(td);
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dfll_register);
+
+/**
+ * tegra_dfll_unregister - release all of the DFLL driver resources for a device
+ * @pdev: DFLL platform_device *
+ *
+ * Unbind this driver from the DFLL hardware device represented by
+ * @pdev. The DFLL must be disabled for this to succeed. Returns 0
+ * upon success or -EBUSY if the DFLL is still active.
+ */
+int tegra_dfll_unregister(struct platform_device *pdev)
+{
+	struct tegra_dfll *td = platform_get_drvdata(pdev);
+
+	/* Try to prevent removal while the DFLL is active */
+	if (td->mode != DFLL_DISABLED) {
+		dev_err(&pdev->dev,
+			"must disable DFLL before removing driver\n");
+		return -EBUSY;
+	}
+
+	debugfs_remove_recursive(td->debugfs_dir);
+
+	dfll_unregister_clk(td);
+	pm_runtime_disable(&pdev->dev);
+
+	clk_unprepare(td->ref_clk);
+	clk_unprepare(td->soc_clk);
+	clk_unprepare(td->i2c_clk);
+
+	reset_control_assert(td->dvco_rst);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dfll_unregister);
diff --git a/drivers/clk/tegra/clk-dfll.h b/drivers/clk/tegra/clk-dfll.h
new file mode 100644
index 0000000..2e4c077
--- /dev/null
+++ b/drivers/clk/tegra/clk-dfll.h
@@ -0,0 +1,54 @@
+/*
+ * clk-dfll.h - prototypes and macros for the Tegra DFLL clocksource driver
+ * Copyright (C) 2013 NVIDIA Corporation.  All rights reserved.
+ *
+ * Aleksandr Frid <afrid@nvidia.com>
+ * Paul Walmsley <pwalmsley@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __DRIVERS_CLK_TEGRA_CLK_DFLL_H
+#define __DRIVERS_CLK_TEGRA_CLK_DFLL_H
+
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/types.h>
+
+/**
+ * struct tegra_dfll_soc_data - SoC-specific hooks/integration for the DFLL driver
+ * @opp_dev: struct device * that holds the OPP table for the DFLL
+ * @min_millivolts: minimum voltage (in mV) that the DFLL can operate
+ * @tune0_low: DFLL tuning register 0 (low voltage range)
+ * @tune0_high: DFLL tuning register 0 (high voltage range)
+ * @tune1: DFLL tuning register 1
+ * @assert_dvco_reset: fn ptr to place the DVCO in reset
+ * @deassert_dvco_reset: fn ptr to release the DVCO reset
+ * @set_clock_trimmers_high: fn ptr to tune clock trimmers for high voltage
+ * @set_clock_trimmers_low: fn ptr to tune clock trimmers for low voltage
+ */
+struct tegra_dfll_soc_data {
+	struct device *dev;
+	unsigned int min_millivolts;
+	u32 tune0_low;
+	u32 tune0_high;
+	u32 tune1;
+	void (*init_clock_trimmers)(void);
+	void (*set_clock_trimmers_high)(void);
+	void (*set_clock_trimmers_low)(void);
+};
+
+int tegra_dfll_register(struct platform_device *pdev,
+			struct tegra_dfll_soc_data *soc);
+int tegra_dfll_unregister(struct platform_device *pdev);
+int tegra_dfll_runtime_suspend(struct device *dev);
+int tegra_dfll_runtime_resume(struct device *dev);
+
+#endif /* __DRIVERS_CLK_TEGRA_CLK_DFLL_H */
diff --git a/drivers/clk/tegra/clk-divider.c b/drivers/clk/tegra/clk-divider.c
index 59a5714..48c83ef 100644
--- a/drivers/clk/tegra/clk-divider.c
+++ b/drivers/clk/tegra/clk-divider.c
@@ -19,7 +19,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-#include <linux/clk.h>
 
 #include "clk.h"
 
diff --git a/drivers/clk/tegra/clk-emc.c b/drivers/clk/tegra/clk-emc.c
index 7649685..138a94b 100644
--- a/drivers/clk/tegra/clk-emc.c
+++ b/drivers/clk/tegra/clk-emc.c
@@ -103,7 +103,7 @@ static unsigned long emc_recalc_rate(struct clk_hw *hw,
 	 * CCF wrongly assumes that the parent won't change during set_rate,
 	 * so get the parent rate explicitly.
 	 */
-	parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+	parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
 
 	val = readl(tegra->clk_regs + CLK_SOURCE_EMC);
 	div = val & CLK_SOURCE_EMC_EMC_2X_CLK_DIVISOR_MASK;
@@ -116,11 +116,7 @@ static unsigned long emc_recalc_rate(struct clk_hw *hw,
  * safer since things have EMC rate floors. Also don't touch parent_rate
  * since we don't want the CCF to play with our parent clocks.
  */
-static long emc_determine_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long min_rate,
-			       unsigned long max_rate,
-			       unsigned long *best_parent_rate,
-			       struct clk_hw **best_parent_hw)
+static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct tegra_clk_emc *tegra;
 	u8 ram_code = tegra_read_ram_code();
@@ -135,22 +131,28 @@ static long emc_determine_rate(struct clk_hw *hw, unsigned long rate,
 
 		timing = tegra->timings + i;
 
-		if (timing->rate > max_rate) {
+		if (timing->rate > req->max_rate) {
 			i = min(i, 1);
-			return tegra->timings[i - 1].rate;
+			req->rate = tegra->timings[i - 1].rate;
+			return 0;
 		}
 
-		if (timing->rate < min_rate)
+		if (timing->rate < req->min_rate)
 			continue;
 
-		if (timing->rate >= rate)
-			return timing->rate;
+		if (timing->rate >= req->rate) {
+			req->rate = timing->rate;
+			return 0;
+		}
 	}
 
-	if (timing)
-		return timing->rate;
+	if (timing) {
+		req->rate = timing->rate;
+		return 0;
+	}
 
-	return __clk_get_rate(hw->clk);
+	req->rate = clk_hw_get_rate(hw);
+	return 0;
 }
 
 static u8 emc_get_parent(struct clk_hw *hw)
@@ -312,7 +314,7 @@ static int emc_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	tegra = container_of(hw, struct tegra_clk_emc, hw);
 
-	if (__clk_get_rate(hw->clk) == rate)
+	if (clk_hw_get_rate(hw) == rate)
 		return 0;
 
 	/*
@@ -525,8 +527,8 @@ struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np,
 	if (IS_ERR(clk))
 		return clk;
 
-	tegra->prev_parent = clk_get_parent_by_index(
-		tegra->hw.clk, emc_get_parent(&tegra->hw));
+	tegra->prev_parent = clk_hw_get_parent_by_index(
+		&tegra->hw, emc_get_parent(&tegra->hw))->clk;
 	tegra->changing_timing = false;
 
 	/* Allow debugging tools to see the EMC clock */
diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
index 0aa8830..d28d6e9 100644
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/slab.h>
 #include <linux/io.h>
diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
index d84ae49..ec5b611 100644
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/export.h>
 #include <linux/slab.h>
diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
index 3598987..257cae0 100644
--- a/drivers/clk/tegra/clk-pll-out.c
+++ b/drivers/clk/tegra/clk-pll-out.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-#include <linux/clk.h>
 
 #include "clk.h"
 
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 05c6d08..d6d4ecb 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -18,8 +18,8 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/clk-provider.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 
 #include "clk.h"
 
@@ -264,7 +264,7 @@ static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll)
 	}
 
 	pr_err("%s: Timed out waiting for pll %s lock\n", __func__,
-	       __clk_get_name(pll->hw.clk));
+	       clk_hw_get_name(&pll->hw));
 
 	return -1;
 }
@@ -595,7 +595,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (pll->params->flags & TEGRA_PLL_FIXED) {
 		if (rate != pll->params->fixed_rate) {
 			pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
-				__func__, __clk_get_name(hw->clk),
+				__func__, clk_hw_get_name(hw),
 				pll->params->fixed_rate, rate);
 			return -EINVAL;
 		}
@@ -605,7 +605,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (_get_table_rate(hw, &cfg, rate, parent_rate) &&
 	    _calc_rate(hw, &cfg, rate, parent_rate)) {
 		pr_err("%s: Failed to set %s rate %lu\n", __func__,
-		       __clk_get_name(hw->clk), rate);
+		       clk_hw_get_name(hw), rate);
 		WARN_ON(1);
 		return -EINVAL;
 	}
@@ -634,7 +634,7 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	/* PLLM is used for memory; we do not change rate */
 	if (pll->params->flags & TEGRA_PLLM)
-		return __clk_get_rate(hw->clk);
+		return clk_hw_get_rate(hw);
 
 	if (_get_table_rate(hw, &cfg, rate, *prate) &&
 	    _calc_rate(hw, &cfg, rate, *prate))
@@ -663,7 +663,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
 		if (_get_table_rate(hw, &sel, pll->params->fixed_rate,
 					parent_rate)) {
 			pr_err("Clock %s has unknown fixed frequency\n",
-			       __clk_get_name(hw->clk));
+			       clk_hw_get_name(hw));
 			BUG();
 		}
 		return pll->params->fixed_rate;
@@ -1577,7 +1577,7 @@ struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
 	if (!pll_params->pdiv_tohw)
 		return ERR_PTR(-EINVAL);
 
-	parent_rate = __clk_get_rate(parent);
+	parent_rate = clk_get_rate(parent);
 
 	pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
 
@@ -1674,7 +1674,7 @@ struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
 		return ERR_PTR(-EINVAL);
 	}
 
-	parent_rate = __clk_get_rate(parent);
+	parent_rate = clk_get_rate(parent);
 
 	pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
 
@@ -1715,7 +1715,7 @@ struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
 		return ERR_PTR(-EINVAL);
 	}
 
-	parent_rate = __clk_get_rate(parent);
+	parent_rate = clk_get_rate(parent);
 
 	pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
 
@@ -1848,7 +1848,7 @@ struct clk *tegra_clk_register_pllss(const char *name, const char *parent_name,
 	val &= ~PLLSS_REF_SRC_SEL_MASK;
 	pll_writel_base(val, pll);
 
-	parent_rate = __clk_get_rate(parent);
+	parent_rate = clk_get_rate(parent);
 
 	pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
 
diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
index 2fd924d..131d1b50 100644
--- a/drivers/clk/tegra/clk-super.c
+++ b/drivers/clk/tegra/clk-super.c
@@ -20,7 +20,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-#include <linux/clk.h>
 
 #include "clk.h"
 
diff --git a/drivers/clk/tegra/clk-tegra-audio.c b/drivers/clk/tegra/clk-tegra-audio.c
index 5c38aab..11e3ad7 100644
--- a/drivers/clk/tegra/clk-tegra-audio.c
+++ b/drivers/clk/tegra/clk-tegra-audio.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
index 605676d..da0b594 100644
--- a/drivers/clk/tegra/clk-tegra-fixed.c
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 46af924..cb6ab83 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
index 08b21c1..91377ab 100644
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ b/drivers/clk/tegra/clk-tegra-pmc.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
index feb3201..5b1d723 100644
--- a/drivers/clk/tegra/clk-tegra-super-gen4.c
+++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -44,7 +43,9 @@ static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
 
 static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
 					"pll_p", "pll_p_out4", "unused",
-					"unused", "pll_x" };
+					"unused", "pll_x", "unused", "unused",
+					"unused", "unused", "unused", "unused",
+					"dfllCPU_out" };
 
 static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
 					 "pll_p", "pll_p_out4", "unused",
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 8237d16..db58715 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -15,9 +15,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/delay.h>
diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
new file mode 100644
index 0000000..6125333
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
@@ -0,0 +1,166 @@
+/*
+ * Tegra124 DFLL FCPU clock source driver
+ *
+ * Copyright (C) 2012-2014 NVIDIA Corporation.  All rights reserved.
+ *
+ * Aleksandr Frid <afrid@nvidia.com>
+ * Paul Walmsley <pwalmsley@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/fuse.h>
+
+#include "clk.h"
+#include "clk-dfll.h"
+#include "cvb.h"
+
+/* Maximum CPU frequency, indexed by CPU speedo id */
+static const unsigned long cpu_max_freq_table[] = {
+	[0] = 2014500000UL,
+	[1] = 2320500000UL,
+	[2] = 2116500000UL,
+	[3] = 2524500000UL,
+};
+
+static const struct cvb_table tegra124_cpu_cvb_tables[] = {
+	{
+		.speedo_id = -1,
+		.process_id = -1,
+		.min_millivolts = 900,
+		.max_millivolts = 1260,
+		.alignment = {
+			.step_uv = 10000, /* 10mV */
+		},
+		.speedo_scale = 100,
+		.voltage_scale = 1000,
+		.cvb_table = {
+			{204000000UL,   {1112619, -29295, 402} },
+			{306000000UL,	{1150460, -30585, 402} },
+			{408000000UL,	{1190122, -31865, 402} },
+			{510000000UL,	{1231606, -33155, 402} },
+			{612000000UL,	{1274912, -34435, 402} },
+			{714000000UL,	{1320040, -35725, 402} },
+			{816000000UL,	{1366990, -37005, 402} },
+			{918000000UL,	{1415762, -38295, 402} },
+			{1020000000UL,	{1466355, -39575, 402} },
+			{1122000000UL,	{1518771, -40865, 402} },
+			{1224000000UL,	{1573009, -42145, 402} },
+			{1326000000UL,	{1629068, -43435, 402} },
+			{1428000000UL,	{1686950, -44715, 402} },
+			{1530000000UL,	{1746653, -46005, 402} },
+			{1632000000UL,	{1808179, -47285, 402} },
+			{1734000000UL,	{1871526, -48575, 402} },
+			{1836000000UL,	{1936696, -49855, 402} },
+			{1938000000UL,	{2003687, -51145, 402} },
+			{2014500000UL,	{2054787, -52095, 402} },
+			{2116500000UL,	{2124957, -53385, 402} },
+			{2218500000UL,	{2196950, -54665, 402} },
+			{2320500000UL,	{2270765, -55955, 402} },
+			{2422500000UL,	{2346401, -57235, 402} },
+			{2524500000UL,	{2437299, -58535, 402} },
+			{0,		{      0,      0,   0} },
+		},
+		.cpu_dfll_data = {
+			.tune0_low = 0x005020ff,
+			.tune0_high = 0x005040ff,
+			.tune1 = 0x00000060,
+		}
+	},
+};
+
+static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
+{
+	int process_id, speedo_id, speedo_value;
+	struct tegra_dfll_soc_data *soc;
+	const struct cvb_table *cvb;
+
+	process_id = tegra_sku_info.cpu_process_id;
+	speedo_id = tegra_sku_info.cpu_speedo_id;
+	speedo_value = tegra_sku_info.cpu_speedo_value;
+
+	if (speedo_id >= ARRAY_SIZE(cpu_max_freq_table)) {
+		dev_err(&pdev->dev, "unknown max CPU freq for speedo_id=%d\n",
+			speedo_id);
+		return -ENODEV;
+	}
+
+	soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
+	if (!soc)
+		return -ENOMEM;
+
+	soc->dev = get_cpu_device(0);
+	if (!soc->dev) {
+		dev_err(&pdev->dev, "no CPU0 device\n");
+		return -ENODEV;
+	}
+
+	cvb = tegra_cvb_build_opp_table(tegra124_cpu_cvb_tables,
+					ARRAY_SIZE(tegra124_cpu_cvb_tables),
+					process_id, speedo_id, speedo_value,
+					cpu_max_freq_table[speedo_id],
+					soc->dev);
+	if (IS_ERR(cvb)) {
+		dev_err(&pdev->dev, "couldn't build OPP table: %ld\n",
+			PTR_ERR(cvb));
+		return PTR_ERR(cvb);
+	}
+
+	soc->min_millivolts = cvb->min_millivolts;
+	soc->tune0_low = cvb->cpu_dfll_data.tune0_low;
+	soc->tune0_high = cvb->cpu_dfll_data.tune0_high;
+	soc->tune1 = cvb->cpu_dfll_data.tune1;
+
+	return tegra_dfll_register(pdev, soc);
+}
+
+static const struct of_device_id tegra124_dfll_fcpu_of_match[] = {
+	{ .compatible = "nvidia,tegra124-dfll", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra124_dfll_fcpu_of_match);
+
+static const struct dev_pm_ops tegra124_dfll_pm_ops = {
+	SET_RUNTIME_PM_OPS(tegra_dfll_runtime_suspend,
+			   tegra_dfll_runtime_resume, NULL)
+};
+
+static struct platform_driver tegra124_dfll_fcpu_driver = {
+	.probe = tegra124_dfll_fcpu_probe,
+	.remove = tegra_dfll_unregister,
+	.driver = {
+		.name = "tegra124-dfll",
+		.of_match_table = tegra124_dfll_fcpu_of_match,
+		.pm = &tegra124_dfll_pm_ops,
+	},
+};
+
+static int __init tegra124_dfll_fcpu_init(void)
+{
+	return platform_driver_register(&tegra124_dfll_fcpu_driver);
+}
+module_init(tegra124_dfll_fcpu_init);
+
+static void __exit tegra124_dfll_fcpu_exit(void)
+{
+	platform_driver_unregister(&tegra124_dfll_fcpu_driver);
+}
+module_exit(tegra124_dfll_fcpu_exit);
+
+MODULE_DESCRIPTION("Tegra124 DFLL clock source driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Aleksandr Frid <afrid@nvidia.com>");
+MODULE_AUTHOR("Paul Walmsley <pwalmsley@nvidia.com>");
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index e8cca3e..824d758 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
@@ -24,6 +23,7 @@
 #include <linux/export.h>
 #include <linux/clk/tegra.h>
 #include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/reset/tegra124-car.h>
 
 #include "clk.h"
 #include "clk-id.h"
@@ -39,6 +39,9 @@
 #define CLK_SOURCE_CSITE 0x1d4
 #define CLK_SOURCE_EMC 0x19c
 
+#define RST_DFLL_DVCO			0x2f4
+#define DVFS_DFLL_RESET_SHIFT		0
+
 #define PLLC_BASE 0x80
 #define PLLC_OUT 0x84
 #define PLLC_MISC2 0x88
@@ -94,6 +97,8 @@
 #define PMC_PLLM_WB0_OVERRIDE 0x1dc
 #define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
 
+#define CCLKG_BURST_POLICY 0x368
+
 #define UTMIP_PLL_CFG2 0x488
 #define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
 #define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
@@ -126,6 +131,8 @@
 #ifdef CONFIG_PM_SLEEP
 static struct cpu_clk_suspend_context {
 	u32 clk_csite_src;
+	u32 cclkg_burst;
+	u32 cclkg_divider;
 } tegra124_cpu_clk_sctx;
 #endif
 
@@ -1319,12 +1326,22 @@ static void tegra124_cpu_clock_suspend(void)
 	tegra124_cpu_clk_sctx.clk_csite_src =
 				readl(clk_base + CLK_SOURCE_CSITE);
 	writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
+
+	tegra124_cpu_clk_sctx.cclkg_burst =
+				readl(clk_base + CCLKG_BURST_POLICY);
+	tegra124_cpu_clk_sctx.cclkg_divider =
+				readl(clk_base + CCLKG_BURST_POLICY + 4);
 }
 
 static void tegra124_cpu_clock_resume(void)
 {
 	writel(tegra124_cpu_clk_sctx.clk_csite_src,
 				clk_base + CLK_SOURCE_CSITE);
+
+	writel(tegra124_cpu_clk_sctx.cclkg_burst,
+					clk_base + CCLKG_BURST_POLICY);
+	writel(tegra124_cpu_clk_sctx.cclkg_divider,
+					clk_base + CCLKG_BURST_POLICY + 4);
 }
 #endif
 
@@ -1415,6 +1432,68 @@ static void __init tegra124_clock_apply_init_table(void)
 }
 
 /**
+ * tegra124_car_barrier - wait for pending writes to the CAR to complete
+ *
+ * Wait for any outstanding writes to the CAR MMIO space from this CPU
+ * to complete before continuing execution.  No return value.
+ */
+static void tegra124_car_barrier(void)
+{
+	readl_relaxed(clk_base + RST_DFLL_DVCO);
+}
+
+/**
+ * tegra124_clock_assert_dfll_dvco_reset - assert the DFLL's DVCO reset
+ *
+ * Assert the reset line of the DFLL's DVCO.  No return value.
+ */
+static void tegra124_clock_assert_dfll_dvco_reset(void)
+{
+	u32 v;
+
+	v = readl_relaxed(clk_base + RST_DFLL_DVCO);
+	v |= (1 << DVFS_DFLL_RESET_SHIFT);
+	writel_relaxed(v, clk_base + RST_DFLL_DVCO);
+	tegra124_car_barrier();
+}
+
+/**
+ * tegra124_clock_deassert_dfll_dvco_reset - deassert the DFLL's DVCO reset
+ *
+ * Deassert the reset line of the DFLL's DVCO, allowing the DVCO to
+ * operate.  No return value.
+ */
+static void tegra124_clock_deassert_dfll_dvco_reset(void)
+{
+	u32 v;
+
+	v = readl_relaxed(clk_base + RST_DFLL_DVCO);
+	v &= ~(1 << DVFS_DFLL_RESET_SHIFT);
+	writel_relaxed(v, clk_base + RST_DFLL_DVCO);
+	tegra124_car_barrier();
+}
+
+static int tegra124_reset_assert(unsigned long id)
+{
+	if (id == TEGRA124_RST_DFLL_DVCO)
+		tegra124_clock_assert_dfll_dvco_reset();
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int tegra124_reset_deassert(unsigned long id)
+{
+	if (id == TEGRA124_RST_DFLL_DVCO)
+		tegra124_clock_deassert_dfll_dvco_reset();
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
  * tegra132_clock_apply_init_table - initialize clocks on Tegra132 SoCs
  *
  * Program an initial clock rate and enable or disable clocks needed
@@ -1499,6 +1578,8 @@ static void __init tegra124_132_clock_init_post(struct device_node *np)
 {
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks,
 				  &pll_x_params);
+	tegra_init_special_resets(1, tegra124_reset_assert,
+				  tegra124_reset_deassert);
 	tegra_add_of_provider(np);
 
 	clks[TEGRA124_CLK_EMC] = tegra_clk_register_emc(clk_base, np,
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 41272dc..bf004f0 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 0af3e83..fad561a 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -16,7 +16,6 @@
 
 #include <linux/io.h>
 #include <linux/delay.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index 41cd87c..2a3a4fe 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/clkdev.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
@@ -49,7 +50,6 @@
 #define RST_DEVICES_L			0x004
 #define RST_DEVICES_H			0x008
 #define RST_DEVICES_U			0x00C
-#define RST_DFLL_DVCO			0x2F4
 #define RST_DEVICES_V			0x358
 #define RST_DEVICES_W			0x35C
 #define RST_DEVICES_X			0x28C
@@ -79,6 +79,11 @@ static struct clk **clks;
 static int clk_num;
 static struct clk_onecell_data clk_data;
 
+/* Handlers for SoC-specific reset lines */
+static int (*special_reset_assert)(unsigned long);
+static int (*special_reset_deassert)(unsigned long);
+static unsigned int num_special_reset;
+
 static struct tegra_clk_periph_regs periph_regs[] = {
 	[0] = {
 		.enb_reg = CLK_OUT_ENB_L,
@@ -152,19 +157,29 @@ static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev,
 	 */
 	tegra_read_chipid();
 
-	writel_relaxed(BIT(id % 32),
-			clk_base + periph_regs[id / 32].rst_set_reg);
+	if (id < periph_banks * 32) {
+		writel_relaxed(BIT(id % 32),
+			       clk_base + periph_regs[id / 32].rst_set_reg);
+		return 0;
+	} else if (id < periph_banks * 32 + num_special_reset) {
+		return special_reset_assert(id);
+	}
 
-	return 0;
+	return -EINVAL;
 }
 
 static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev,
 		unsigned long id)
 {
-	writel_relaxed(BIT(id % 32),
-			clk_base + periph_regs[id / 32].rst_clr_reg);
+	if (id < periph_banks * 32) {
+		writel_relaxed(BIT(id % 32),
+			       clk_base + periph_regs[id / 32].rst_clr_reg);
+		return 0;
+	} else if (id < periph_banks * 32 + num_special_reset) {
+		return special_reset_deassert(id);
+	}
 
-	return 0;
+	return -EINVAL;
 }
 
 struct tegra_clk_periph_regs *get_reg_bank(int clkid)
@@ -286,10 +301,19 @@ void __init tegra_add_of_provider(struct device_node *np)
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
 	rst_ctlr.of_node = np;
-	rst_ctlr.nr_resets = periph_banks * 32;
+	rst_ctlr.nr_resets = periph_banks * 32 + num_special_reset;
 	reset_controller_register(&rst_ctlr);
 }
 
+void __init tegra_init_special_resets(unsigned int num,
+				      int (*assert)(unsigned long),
+				      int (*deassert)(unsigned long))
+{
+	num_special_reset = num;
+	special_reset_assert = assert;
+	special_reset_deassert = deassert;
+}
+
 void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
 {
 	int i;
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 75ddc8ff..0621887 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -591,6 +591,9 @@ struct tegra_devclk {
 	char		*con_id;
 };
 
+void tegra_init_special_resets(unsigned int num, int (*assert)(unsigned long),
+			       int (*deassert)(unsigned long));
+
 void tegra_init_from_table(struct tegra_clk_init_table *tbl,
 		struct clk *clks[], int clk_max);
 
diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c
new file mode 100644
index 0000000..0204e08
--- /dev/null
+++ b/drivers/clk/tegra/cvb.c
@@ -0,0 +1,140 @@
+/*
+ * Utility functions for parsing Tegra CVB voltage tables
+ *
+ * Copyright (C) 2012-2014 NVIDIA Corporation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/pm_opp.h>
+
+#include "cvb.h"
+
+/* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) */
+static inline int get_cvb_voltage(int speedo, int s_scale,
+				  const struct cvb_coefficients *cvb)
+{
+	int mv;
+
+	/* apply only speedo scale: output mv = cvb_mv * v_scale */
+	mv = DIV_ROUND_CLOSEST(cvb->c2 * speedo, s_scale);
+	mv = DIV_ROUND_CLOSEST((mv + cvb->c1) * speedo, s_scale) + cvb->c0;
+	return mv;
+}
+
+static int round_cvb_voltage(int mv, int v_scale,
+			     const struct rail_alignment *align)
+{
+	/* combined: apply voltage scale and round to cvb alignment step */
+	int uv;
+	int step = (align->step_uv ? : 1000) * v_scale;
+	int offset = align->offset_uv * v_scale;
+
+	uv = max(mv * 1000, offset) - offset;
+	uv = DIV_ROUND_UP(uv, step) * align->step_uv + align->offset_uv;
+	return uv / 1000;
+}
+
+enum {
+	DOWN,
+	UP
+};
+
+static int round_voltage(int mv, const struct rail_alignment *align, int up)
+{
+	if (align->step_uv) {
+		int uv;
+
+		uv = max(mv * 1000, align->offset_uv) - align->offset_uv;
+		uv = (uv + (up ? align->step_uv - 1 : 0)) / align->step_uv;
+		return (uv * align->step_uv + align->offset_uv) / 1000;
+	}
+	return mv;
+}
+
+static int build_opp_table(const struct cvb_table *d,
+			   int speedo_value,
+			   unsigned long max_freq,
+			   struct device *opp_dev)
+{
+	int i, ret, dfll_mv, min_mv, max_mv;
+	const struct cvb_table_freq_entry *table = NULL;
+	const struct rail_alignment *align = &d->alignment;
+
+	min_mv = round_voltage(d->min_millivolts, align, UP);
+	max_mv = round_voltage(d->max_millivolts, align, DOWN);
+
+	for (i = 0; i < MAX_DVFS_FREQS; i++) {
+		table = &d->cvb_table[i];
+		if (!table->freq || (table->freq > max_freq))
+			break;
+
+		/*
+		 * FIXME after clk_round_rate/clk_determine_rate prototypes
+		 * have been updated
+		 */
+		if (table->freq & (1<<31))
+			continue;
+
+		dfll_mv = get_cvb_voltage(
+			speedo_value, d->speedo_scale, &table->coefficients);
+		dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align);
+		dfll_mv = clamp(dfll_mv, min_mv, max_mv);
+
+		ret = dev_pm_opp_add(opp_dev, table->freq, dfll_mv * 1000);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * tegra_cvb_build_opp_table - build OPP table from Tegra CVB tables
+ * @cvb_tables: array of CVB tables
+ * @sz: size of the previously mentioned array
+ * @process_id: process id of the HW module
+ * @speedo_id: speedo id of the HW module
+ * @speedo_value: speedo value of the HW module
+ * @max_rate: highest safe clock rate
+ * @opp_dev: the struct device * for which the OPP table is built
+ *
+ * On Tegra, a CVB table encodes the relationship between operating voltage
+ * and safe maximal frequency for a given module (e.g. GPU or CPU). This
+ * function calculates the optimal voltage-frequency operating points
+ * for the given arguments and exports them via the OPP library for the
+ * given @opp_dev. Returns a pointer to the struct cvb_table that matched
+ * or an ERR_PTR on failure.
+ */
+const struct cvb_table *tegra_cvb_build_opp_table(
+		const struct cvb_table *cvb_tables,
+		size_t sz, int process_id,
+		int speedo_id, int speedo_value,
+		unsigned long max_rate,
+		struct device *opp_dev)
+{
+	int i, ret;
+
+	for (i = 0; i < sz; i++) {
+		const struct cvb_table *d = &cvb_tables[i];
+
+		if (d->speedo_id != -1 && d->speedo_id != speedo_id)
+			continue;
+		if (d->process_id != -1 && d->process_id != process_id)
+			continue;
+
+		ret = build_opp_table(d, speedo_value, max_rate, opp_dev);
+		return ret ? ERR_PTR(ret) : d;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
diff --git a/drivers/clk/tegra/cvb.h b/drivers/clk/tegra/cvb.h
new file mode 100644
index 0000000..f62cdc4
--- /dev/null
+++ b/drivers/clk/tegra/cvb.h
@@ -0,0 +1,67 @@
+/*
+ * Utility functions for parsing Tegra CVB voltage tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __DRIVERS_CLK_TEGRA_CVB_H
+#define __DRIVERS_CLK_TEGRA_CVB_H
+
+#include <linux/types.h>
+
+struct device;
+
+#define MAX_DVFS_FREQS	40
+
+struct rail_alignment {
+	int offset_uv;
+	int step_uv;
+};
+
+struct cvb_coefficients {
+	int c0;
+	int c1;
+	int c2;
+};
+
+struct cvb_table_freq_entry {
+	unsigned long freq;
+	struct cvb_coefficients coefficients;
+};
+
+struct cvb_cpu_dfll_data {
+	u32 tune0_low;
+	u32 tune0_high;
+	u32 tune1;
+};
+
+struct cvb_table {
+	int speedo_id;
+	int process_id;
+
+	int min_millivolts;
+	int max_millivolts;
+	struct rail_alignment alignment;
+
+	int speedo_scale;
+	int voltage_scale;
+	struct cvb_table_freq_entry cvb_table[MAX_DVFS_FREQS];
+	struct cvb_cpu_dfll_data cpu_dfll_data;
+};
+
+const struct cvb_table *tegra_cvb_build_opp_table(
+		const struct cvb_table *cvb_tables,
+		size_t sz, int process_id,
+		int speedo_id, int speedo_value,
+		unsigned long max_rate,
+		struct device *opp_dev);
+
+#endif