Merge branch 'clk-qcom-sdm845' into clk-next

* clk-qcom-sdm845:
  clk: qcom: Export clk_fabia_pll_configure()
  clk: qcom: Add video clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Video clock bindings
  clk: qcom: Add Global Clock controller (GCC) driver for SDM845
  clk: qcom: Add DT bindings for SDM845 gcc clock controller
  clk: qcom: Configure the RCGs to a safe source as needed
  clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
  clk: qcom: Simplify gdsc status checking logic
  clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
  clk: qcom: gdsc: Add support to poll for higher timeout value
  clk: qcom: gdsc: Add support to reset AON and block reset logic
  clk: qcom: Add support for controlling Fabia PLL
  clk: qcom: Clear hardware clock control bit of RCG

Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the
description and also the video Kconfig says things slightly differently
from the GCC one so just make it the same.

1 files changed, 153 insertions, 14 deletions

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index ec6cee8..52208d4 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright (c) 2013, 2018, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/kernel.h>
@@ -42,6 +34,7 @@
 #define CFG_MODE_SHIFT		12
 #define CFG_MODE_MASK		(0x3 << CFG_MODE_SHIFT)
 #define CFG_MODE_DUAL_EDGE	(0x2 << CFG_MODE_SHIFT)
+#define CFG_HW_CLK_CTRL_MASK	BIT(20)
 
 #define M_REG			0x8
 #define N_REG			0xc
@@ -249,7 +242,7 @@ static int clk_rcg2_determine_floor_rate(struct clk_hw *hw,
 	return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR);
 }
 
-static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 {
 	u32 cfg, mask;
 	struct clk_hw *hw = &rcg->clkr.hw;
@@ -277,13 +270,21 @@ static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 	}
 
 	mask = BIT(rcg->hid_width) - 1;
-	mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK;
+	mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
 	cfg = f->pre_div << CFG_SRC_DIV_SHIFT;
 	cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
 	if (rcg->mnd_width && f->n && (f->m != f->n))
 		cfg |= CFG_MODE_DUAL_EDGE;
-	ret = regmap_update_bits(rcg->clkr.regmap,
-			rcg->cmd_rcgr + CFG_REG, mask, cfg);
+
+	return regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+					mask, cfg);
+}
+
+static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
+{
+	int ret;
+
+	ret = __clk_rcg2_configure(rcg, f);
 	if (ret)
 		return ret;
 
@@ -790,3 +791,141 @@ const struct clk_ops clk_gfx3d_ops = {
 	.determine_rate = clk_gfx3d_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_gfx3d_ops);
+
+static int clk_rcg2_set_force_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const char *name = clk_hw_get_name(hw);
+	int ret, count;
+
+	ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
+				 CMD_ROOT_EN, CMD_ROOT_EN);
+	if (ret)
+		return ret;
+
+	/* wait for RCG to turn ON */
+	for (count = 500; count > 0; count--) {
+		if (clk_rcg2_is_enabled(hw))
+			return 0;
+
+		udelay(1);
+	}
+
+	pr_err("%s: RCG did not turn on\n", name);
+	return -ETIMEDOUT;
+}
+
+static int clk_rcg2_clear_force_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+
+	return regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
+					CMD_ROOT_EN, 0);
+}
+
+static int
+clk_rcg2_shared_force_enable_clear(struct clk_hw *hw, const struct freq_tbl *f)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	int ret;
+
+	ret = clk_rcg2_set_force_enable(hw);
+	if (ret)
+		return ret;
+
+	ret = clk_rcg2_configure(rcg, f);
+	if (ret)
+		return ret;
+
+	return clk_rcg2_clear_force_enable(hw);
+}
+
+static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const struct freq_tbl *f;
+
+	f = qcom_find_freq(rcg->freq_tbl, rate);
+	if (!f)
+		return -EINVAL;
+
+	/*
+	 * In case clock is disabled, update the CFG, M, N and D registers
+	 * and don't hit the update bit of CMD register.
+	 */
+	if (!__clk_is_enabled(hw->clk))
+		return __clk_rcg2_configure(rcg, f);
+
+	return clk_rcg2_shared_force_enable_clear(hw, f);
+}
+
+static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return clk_rcg2_shared_set_rate(hw, rate, parent_rate);
+}
+
+static int clk_rcg2_shared_enable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	int ret;
+
+	/*
+	 * Set the update bit because required configuration has already
+	 * been written in clk_rcg2_shared_set_rate()
+	 */
+	ret = clk_rcg2_set_force_enable(hw);
+	if (ret)
+		return ret;
+
+	ret = update_config(rcg);
+	if (ret)
+		return ret;
+
+	return clk_rcg2_clear_force_enable(hw);
+}
+
+static void clk_rcg2_shared_disable(struct clk_hw *hw)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	u32 cfg;
+
+	/*
+	 * Store current configuration as switching to safe source would clear
+	 * the SRC and DIV of CFG register
+	 */
+	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
+
+	/*
+	 * Park the RCG at a safe configuration - sourced off of safe source.
+	 * Force enable and disable the RCG while configuring it to safeguard
+	 * against any update signal coming from the downstream clock.
+	 * The current parent is still prepared and enabled at this point, and
+	 * the safe source is always on while application processor subsystem
+	 * is online. Therefore, the RCG can safely switch its parent.
+	 */
+	clk_rcg2_set_force_enable(hw);
+
+	regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+		     rcg->safe_src_index << CFG_SRC_SEL_SHIFT);
+
+	update_config(rcg);
+
+	clk_rcg2_clear_force_enable(hw);
+
+	/* Write back the stored configuration corresponding to current rate */
+	regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
+}
+
+const struct clk_ops clk_rcg2_shared_ops = {
+	.enable = clk_rcg2_shared_enable,
+	.disable = clk_rcg2_shared_disable,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.determine_rate = clk_rcg2_determine_rate,
+	.set_rate = clk_rcg2_shared_set_rate,
+	.set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);