Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

9 files changed, 2244 insertions, 43 deletions

diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index fa789ea..344001b 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -84,6 +84,17 @@ config 977_WATCHDOG
 
 	  Not sure? It's safe to say N.
 
+config IXP2000_WATCHDOG
+	tristate "IXP2000 Watchdog"
+	depends on WATCHDOG && ARCH_IXP2000
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IXP2000(2400, 2800, 2850) network processors.
+	  This driver can be built as a module by choosing M. The module
+	  will be called ixp2000_wdt.
+
+	  Say N if you are unsure.
+
 config IXP4XX_WATCHDOG
 	tristate "IXP4xx Watchdog"
 	depends on WATCHDOG && ARCH_IXP4XX
@@ -100,17 +111,6 @@ config IXP4XX_WATCHDOG
 
 	  Say N if you are unsure.
 
-config IXP2000_WATCHDOG
-	tristate "IXP2000 Watchdog"
-	depends on WATCHDOG && ARCH_IXP2000
-	help
-	  Say Y here if to include support for the watchdog timer
-	  in the Intel IXP2000(2400, 2800, 2850) network processors.
-	  This driver can be built as a module by choosing M. The module
-	  will be called ixp2000_wdt.
-
-	  Say N if you are unsure.
-
 config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
 	depends on WATCHDOG && ARCH_S3C2410
@@ -233,6 +233,16 @@ config IB700_WDT
 
 	  Most people will say N.
 
+config IBMASR
+        tristate "IBM Automatic Server Restart"
+        depends on WATCHDOG && X86
+        help
+	  This is the driver for the IBM Automatic Server Restart watchdog
+	  timer builtin into some eServer xSeries machines.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmasr.
+
 config WAFER_WDT
 	tristate "ICP Wafer 5823 Single Board Computer Watchdog"
 	depends on WATCHDOG && X86
@@ -243,6 +253,16 @@ config WAFER_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called wafer5823wdt.
 
+config I6300ESB_WDT
+	tristate "Intel 6300ESB Timer/Watchdog"
+	depends on WATCHDOG && X86 && PCI
+	---help---
+	  Hardware driver for the watchdog timer built into the Intel
+	  6300ESB controller hub.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called i6300esb.
+
 config I8XX_TCO
 	tristate "Intel i8xx TCO Timer/Watchdog"
 	depends on WATCHDOG && (X86 || IA64) && PCI
@@ -298,6 +318,19 @@ config 60XX_WDT
 	  You can compile this driver directly into the kernel, or use
 	  it as a module.  The module will be called sbc60xxwdt.
 
+config SBC8360_WDT
+	tristate "SBC8360 Watchdog Timer"
+	depends on WATCHDOG && X86
+	---help---
+
+	  This is the driver for the hardware watchdog on the SBC8360 Single
+	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc8360.ko.
+
+	  Most people will say N.
+
 config CPU5_WDT
 	tristate "SMA CPU5 Watchdog"
 	depends on WATCHDOG && X86
@@ -336,6 +369,19 @@ config W83877F_WDT
 
 	  Most people will say N.
 
+config W83977F_WDT
+	tristate "W83977F (PCM-5335) Watchdog Timer"
+	depends on WATCHDOG && X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83977F I/O chip
+	  as used in AAEON's PCM-5335 SBC (and likely others).  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83977f_wdt.
+
 config MACHZ_WDT
 	tristate "ZF MachZ Watchdog"
 	depends on WATCHDOG && X86
@@ -355,6 +401,10 @@ config 8xx_WDT
 	tristate "MPC8xx Watchdog Timer"
 	depends on WATCHDOG && 8xx
 
+config MV64X60_WDT
+	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
+	depends on WATCHDOG && MV64X60
+
 config BOOKE_WDT
 	tristate "PowerPC Book-E Watchdog Timer"
 	depends on WATCHDOG && (BOOKE || 4xx)
@@ -362,6 +412,17 @@ config BOOKE_WDT
 	  Please see Documentation/watchdog/watchdog-api.txt for
 	  more information.
 
+# PPC64 Architecture
+
+config WATCHDOG_RTAS
+	tristate "RTAS watchdog"
+	depends on WATCHDOG && PPC_RTAS
+	help
+	  This driver adds watchdog support for the RTAS watchdog.
+
+          To compile this driver as a module, choose M here. The module
+	  will be called wdrtas.
+
 # MIPS Architecture
 
 config INDYDOG
@@ -430,16 +491,6 @@ config WATCHDOG_RIO
 	  machines.  The watchdog timeout period is normally one minute but
 	  can be changed with a boot-time parameter.
 
-# ppc64 RTAS watchdog
-config WATCHDOG_RTAS
-	tristate "RTAS watchdog"
-	depends on WATCHDOG && PPC_RTAS
-	help
-	  This driver adds watchdog support for the RTAS watchdog.
-
-          To compile this driver as a module, choose M here. The module
-	  will be called wdrtas.
-
 #
 # ISA-based Watchdog Cards
 #
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index bc6f5fe..cfd0a39 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -39,22 +39,27 @@ obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
 obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
 obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_IB700_WDT) += ib700wdt.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
 obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
 obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
 obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
 obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
 obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
 obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
 obj-$(CONFIG_MACHZ_WDT) += machzwd.o
 
 # PowerPC Architecture
 obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 
 # PPC64 Architecture
 obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
-obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 
 # MIPS Architecture
 obj-$(CONFIG_INDYDOG) += indydog.o
diff --git a/drivers/char/watchdog/i6300esb.c b/drivers/char/watchdog/i6300esb.c
new file mode 100644
index 0000000..93785f1
--- /dev/null
+++ b/drivers/char/watchdog/i6300esb.c
@@ -0,0 +1,527 @@
+/*
+ *	i6300esb:	Watchdog timer driver for Intel 6300ESB chipset
+ *
+ *	(c) Copyright 2004 Google Inc.
+ *	(c) Copyright 2005 David Härdeman <david@2gen.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *      based on i810-tco.c which is in turn based on softdog.c
+ *
+ * 	The timer is implemented in the following I/O controller hubs:
+ * 	(See the intel documentation on http://developer.intel.com.)
+ * 	6300ESB chip : document number 300641-003
+ *
+ *  2004YYZZ Ross Biro
+ *	Initial version 0.01
+ *  2004YYZZ Ross Biro
+ *  	Version 0.02
+ *  20050210 David Härdeman <david@2gen.com>
+ *      Ported driver to kernel 2.6
+ */
+
+/*
+ *      Includes, defines, variables, module parameters, ...
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/* Module and version information */
+#define ESB_VERSION "0.03"
+#define ESB_MODULE_NAME "i6300ESB timer"
+#define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
+#define PFX ESB_MODULE_NAME ": "
+
+/* PCI configuration registers */
+#define ESB_CONFIG_REG  0x60            /* Config register                   */
+#define ESB_LOCK_REG    0x68            /* WDT lock register                 */
+
+/* Memory mapped registers */
+#define ESB_TIMER1_REG  BASEADDR + 0x00 /* Timer1 value after each reset     */
+#define ESB_TIMER2_REG  BASEADDR + 0x04 /* Timer2 value after each reset     */
+#define ESB_GINTSR_REG  BASEADDR + 0x08 /* General Interrupt Status Register */
+#define ESB_RELOAD_REG  BASEADDR + 0x0c /* Reload register                   */
+
+/* Lock register bits */
+#define ESB_WDT_FUNC    ( 0x01 << 2 )   /* Watchdog functionality            */
+#define ESB_WDT_ENABLE  ( 0x01 << 1 )   /* Enable WDT                        */
+#define ESB_WDT_LOCK    ( 0x01 << 0 )   /* Lock (nowayout)                   */
+
+/* Config register bits */
+#define ESB_WDT_REBOOT  ( 0x01 << 5 )   /* Enable reboot on timeout          */
+#define ESB_WDT_FREQ    ( 0x01 << 2 )   /* Decrement frequency               */
+#define ESB_WDT_INTTYPE ( 0x11 << 0 )   /* Interrupt type on timer1 timeout  */
+
+/* Reload register bits */
+#define ESB_WDT_RELOAD ( 0x01 << 8 )    /* prevent timeout                   */
+
+/* Magic constants */
+#define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
+#define ESB_UNLOCK2     0x86            /* Step 2 to unlock reset registers  */
+
+/* internal variables */
+static void __iomem *BASEADDR;
+static spinlock_t esb_lock; /* Guards the hardware */
+static unsigned long timer_alive;
+static struct pci_dev *esb_pci;
+static unsigned short triggered; /* The status of the watchdog upon boot */
+static char esb_expect_close;
+
+/* module parameters */
+#define WATCHDOG_HEARTBEAT 30   /* 30 sec default heartbeat (1<heartbeat<2*1023) */
+static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Some i6300ESB specific functions
+ */
+
+/*
+ * Prepare for reloading the timer by unlocking the proper registers.
+ * This is performed by first writing 0x80 followed by 0x86 to the
+ * reload register. After this the appropriate registers can be written
+ * to once before they need to be unlocked again.
+ */
+static inline void esb_unlock_registers(void) {
+        writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
+        writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+}
+
+static void esb_timer_start(void)
+{
+	u8 val;
+
+	/* Enable or Enable + Lock? */
+	val = 0x02 | (nowayout ? 0x01 : 0x00);
+
+        pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+}
+
+static int esb_timer_stop(void)
+{
+	u8 val;
+
+	spin_lock(&esb_lock);
+	/* First, reset timers as suggested by the docs */
+	esb_unlock_registers();
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+	/* Then disable the WDT */
+	pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
+	pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
+	spin_unlock(&esb_lock);
+
+	/* Returns 0 if the timer was disabled, non-zero otherwise */
+	return (val & 0x01);
+}
+
+static void esb_timer_keepalive(void)
+{
+	spin_lock(&esb_lock);
+	esb_unlock_registers();
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+        /* FIXME: Do we need to flush anything here? */
+	spin_unlock(&esb_lock);
+}
+
+static int esb_timer_set_heartbeat(int time)
+{
+	u32 val;
+
+	if (time < 0x1 || time > (2 * 0x03ff))
+		return -EINVAL;
+
+	spin_lock(&esb_lock);
+
+	/* We shift by 9, so if we are passed a value of 1 sec,
+	 * val will be 1 << 9 = 512, then write that to two
+	 * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
+	 */
+	val = time << 9;
+
+	/* Write timer 1 */
+	esb_unlock_registers();
+	writel(val, ESB_TIMER1_REG);
+
+	/* Write timer 2 */
+	esb_unlock_registers();
+        writel(val, ESB_TIMER2_REG);
+
+        /* Reload */
+	esb_unlock_registers();
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+
+	/* FIXME: Do we need to flush everything out? */
+
+	/* Done */
+	heartbeat = time;
+	spin_unlock(&esb_lock);
+	return 0;
+}
+
+static int esb_timer_read (void)
+{
+       	u32 count;
+
+	/* This isn't documented, and doesn't take into
+         * acount which stage is running, but it looks
+         * like a 20 bit count down, so we might as well report it.
+         */
+        pci_read_config_dword(esb_pci, 0x64, &count);
+        return (int)count;
+}
+
+/*
+ * 	/dev/watchdog handling
+ */
+
+static int esb_open (struct inode *inode, struct file *file)
+{
+        /* /dev/watchdog can only be opened once */
+        if (test_and_set_bit(0, &timer_alive))
+                return -EBUSY;
+
+        /* Reload and activate timer */
+        esb_timer_keepalive ();
+        esb_timer_start ();
+
+	return nonseekable_open(inode, file);
+}
+
+static int esb_release (struct inode *inode, struct file *file)
+{
+        /* Shut off the timer. */
+        if (esb_expect_close == 42) {
+                esb_timer_stop ();
+        } else {
+                printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+                esb_timer_keepalive ();
+        }
+        clear_bit(0, &timer_alive);
+        esb_expect_close = 0;
+        return 0;
+}
+
+static ssize_t esb_write (struct file *file, const char __user *data,
+			  size_t len, loff_t * ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+        if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			esb_expect_close = 0;
+
+			/* scan to see whether or not we got the magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if(get_user(c, data+i))
+					return -EFAULT;
+				if (c == 'V')
+					esb_expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		esb_timer_keepalive ();
+	}
+	return len;
+}
+
+static int esb_ioctl (struct inode *inode, struct file *file,
+		      unsigned int cmd, unsigned long arg)
+{
+	int new_options, retval = -EINVAL;
+	int new_heartbeat;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static struct watchdog_info ident = {
+		.options =              WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =     0,
+		.identity =             ESB_MODULE_NAME,
+	};
+
+	switch (cmd) {
+		case WDIOC_GETSUPPORT:
+			return copy_to_user(argp, &ident,
+					    sizeof (ident)) ? -EFAULT : 0;
+
+		case WDIOC_GETSTATUS:
+			return put_user (esb_timer_read(), p);
+
+		case WDIOC_GETBOOTSTATUS:
+			return put_user (triggered, p);
+
+                case WDIOC_KEEPALIVE:
+                        esb_timer_keepalive ();
+                        return 0;
+
+                case WDIOC_SETOPTIONS:
+                {
+                        if (get_user (new_options, p))
+                                return -EFAULT;
+
+                        if (new_options & WDIOS_DISABLECARD) {
+                                esb_timer_stop ();
+                                retval = 0;
+                        }
+
+                        if (new_options & WDIOS_ENABLECARD) {
+                                esb_timer_keepalive ();
+                                esb_timer_start ();
+                                retval = 0;
+                        }
+
+                        return retval;
+                }
+
+                case WDIOC_SETTIMEOUT:
+                {
+                        if (get_user(new_heartbeat, p))
+                                return -EFAULT;
+
+                        if (esb_timer_set_heartbeat(new_heartbeat))
+                            return -EINVAL;
+
+                        esb_timer_keepalive ();
+                        /* Fall */
+                }
+
+                case WDIOC_GETTIMEOUT:
+                        return put_user(heartbeat, p);
+
+                default:
+                        return -ENOIOCTLCMD;
+        }
+}
+
+/*
+ *      Notify system
+ */
+
+static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+{
+        if (code==SYS_DOWN || code==SYS_HALT) {
+                /* Turn the WDT off */
+                esb_timer_stop ();
+        }
+
+        return NOTIFY_DONE;
+}
+
+/*
+ *      Kernel Interfaces
+ */
+
+static struct file_operations esb_fops = {
+        .owner =        THIS_MODULE,
+        .llseek =       no_llseek,
+        .write =        esb_write,
+        .ioctl =        esb_ioctl,
+        .open =         esb_open,
+        .release =      esb_release,
+};
+
+static struct miscdevice esb_miscdev = {
+        .minor =        WATCHDOG_MINOR,
+        .name =         "watchdog",
+        .fops =         &esb_fops,
+};
+
+static struct notifier_block esb_notifier = {
+        .notifier_call =        esb_notify_sys,
+};
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static struct pci_device_id esb_pci_tbl[] = {
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+        { 0, },                 /* End of list */
+};
+MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
+
+/*
+ *      Init & exit routines
+ */
+
+static unsigned char __init esb_getdevice (void)
+{
+	u8 val1;
+	unsigned short val2;
+
+        struct pci_dev *dev = NULL;
+        /*
+         *      Find the PCI device
+         */
+
+        for_each_pci_dev(dev) {
+                if (pci_match_id(esb_pci_tbl, dev)) {
+                        esb_pci = dev;
+                        break;
+                }
+	}
+
+        if (esb_pci) {
+        	if (pci_enable_device(esb_pci)) {
+			printk (KERN_ERR PFX "failed to enable device\n");
+			goto err_devput;
+		}
+
+		if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+			printk (KERN_ERR PFX "failed to request region\n");
+			goto err_disable;
+		}
+
+		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
+				   pci_resource_len(esb_pci, 0));
+		if (BASEADDR == NULL) {
+                	/* Something's wrong here, BASEADDR has to be set */
+			printk (KERN_ERR PFX "failed to get BASEADDR\n");
+                        goto err_release;
+                }
+
+		/*
+		 * The watchdog has two timers, it can be setup so that the
+		 * expiry of timer1 results in an interrupt and the expiry of
+		 * timer2 results in a reboot. We set it to not generate
+		 * any interrupts as there is not much we can do with it
+		 * right now.
+		 *
+		 * We also enable reboots and set the timer frequency to
+		 * the PCI clock divided by 2^15 (approx 1KHz).
+		 */
+		pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+
+		/* Check that the WDT isn't already locked */
+		pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+		if (val1 & ESB_WDT_LOCK)
+			printk (KERN_WARNING PFX "nowayout already set\n");
+
+		/* Set the timer to watchdog mode and disable it for now */
+		pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+
+		/* Check if the watchdog was previously triggered */
+		esb_unlock_registers();
+		val2 = readw(ESB_RELOAD_REG);
+		triggered = (val2 & (0x01 << 9) >> 9);
+
+		/* Reset trigger flag and timers */
+		esb_unlock_registers();
+		writew((0x11 << 8), ESB_RELOAD_REG);
+
+		/* Done */
+		return 1;
+
+err_release:
+		pci_release_region(esb_pci, 0);
+err_disable:
+		pci_disable_device(esb_pci);
+err_devput:
+		pci_dev_put(esb_pci);
+	}
+	return 0;
+}
+
+static int __init watchdog_init (void)
+{
+        int ret;
+
+        spin_lock_init(&esb_lock);
+
+        /* Check whether or not the hardware watchdog is there */
+        if (!esb_getdevice () || esb_pci == NULL)
+                return -ENODEV;
+
+        /* Check that the heartbeat value is within it's range ; if not reset to the default */
+        if (esb_timer_set_heartbeat (heartbeat)) {
+                esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
+                printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
+		       heartbeat);
+        }
+
+        ret = register_reboot_notifier(&esb_notifier);
+        if (ret != 0) {
+                printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+                        ret);
+                goto err_unmap;
+        }
+
+        ret = misc_register(&esb_miscdev);
+        if (ret != 0) {
+                printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+                        WATCHDOG_MINOR, ret);
+                goto err_notifier;
+        }
+
+        esb_timer_stop ();
+
+        printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+                BASEADDR, heartbeat, nowayout);
+
+        return 0;
+
+err_notifier:
+        unregister_reboot_notifier(&esb_notifier);
+err_unmap:
+	iounmap(BASEADDR);
+/* err_release: */
+	pci_release_region(esb_pci, 0);
+/* err_disable: */
+	pci_disable_device(esb_pci);
+/* err_devput: */
+	pci_dev_put(esb_pci);
+        return ret;
+}
+
+static void __exit watchdog_cleanup (void)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		esb_timer_stop ();
+
+	/* Deregister */
+	misc_deregister(&esb_miscdev);
+        unregister_reboot_notifier(&esb_notifier);
+	iounmap(BASEADDR);
+	pci_release_region(esb_pci, 0);
+	pci_disable_device(esb_pci);
+	pci_dev_put(esb_pci);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_cleanup);
+
+MODULE_AUTHOR("Ross Biro and David Härdeman");
+MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/ibmasr.c b/drivers/char/watchdog/ibmasr.c
new file mode 100644
index 0000000..294c474
--- /dev/null
+++ b/drivers/char/watchdog/ibmasr.c
@@ -0,0 +1,405 @@
+/*
+ * IBM Automatic Server Restart driver.
+ *
+ * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
+ *
+ * Based on driver written by Pete Reynolds.
+ * Copyright (c) IBM Corporation, 1998-2004.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+
+enum {
+	ASMTYPE_UNKNOWN,
+	ASMTYPE_TOPAZ,
+	ASMTYPE_JASPER,
+	ASMTYPE_PEARL,
+	ASMTYPE_JUNIPER,
+	ASMTYPE_SPRUCE,
+};
+
+#define PFX "ibmasr: "
+
+#define TOPAZ_ASR_REG_OFFSET	4
+#define TOPAZ_ASR_TOGGLE	0x40
+#define TOPAZ_ASR_DISABLE	0x80
+
+/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
+#define PEARL_BASE	0xe04
+#define PEARL_WRITE	0xe06
+#define PEARL_READ	0xe07
+
+#define PEARL_ASR_DISABLE_MASK	0x80	/* bit 7: disable = 1, enable = 0 */
+#define PEARL_ASR_TOGGLE_MASK	0x40	/* bit 6: 0, then 1, then 0 */
+
+/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
+#define JASPER_ASR_REG_OFFSET	0x38
+
+#define JASPER_ASR_DISABLE_MASK	0x01	/* bit 0: disable = 1, enable = 0 */
+#define JASPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define JUNIPER_BASE_ADDRESS	0x54b	/* Base address of Juniper ASR */
+#define JUNIPER_ASR_DISABLE_MASK 0x01	/* bit 0: disable = 1 enable = 0 */
+#define JUNIPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define SPRUCE_BASE_ADDRESS	0x118e	/* Base address of Spruce ASR */
+#define SPRUCE_ASR_DISABLE_MASK	0x01	/* bit 1: disable = 1 enable = 0 */
+#define SPRUCE_ASR_TOGGLE_MASK	0x02	/* bit 0: 0, then 1, then 0 */
+
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static unsigned long asr_is_open;
+static char asr_expect_close;
+
+static unsigned int asr_type, asr_base, asr_length;
+static unsigned int asr_read_addr, asr_write_addr;
+static unsigned char asr_toggle_mask, asr_disable_mask;
+
+static void asr_toggle(void)
+{
+	unsigned char reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg | asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+}
+
+static void asr_enable(void)
+{
+	unsigned char reg;
+
+	if (asr_type == ASMTYPE_TOPAZ) {
+		/* asr_write_addr == asr_read_addr */
+		reg = inb(asr_read_addr);
+		outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
+		     asr_read_addr);
+	} else {
+		/*
+		 * First make sure the hardware timer is reset by toggling
+		 * ASR hardware timer line.
+		 */
+		asr_toggle();
+
+		reg = inb(asr_read_addr);
+		outb(reg & ~asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+}
+
+static void asr_disable(void)
+{
+	unsigned char reg = inb(asr_read_addr);
+
+	if (asr_type == ASMTYPE_TOPAZ)
+		/* asr_write_addr == asr_read_addr */
+		outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
+		     asr_read_addr);
+	else {
+		outb(reg | asr_toggle_mask, asr_write_addr);
+		reg = inb(asr_read_addr);
+
+		outb(reg | asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+}
+
+static int __init asr_get_base_address(void)
+{
+	unsigned char low, high;
+	const char *type = "";
+
+	asr_length = 1;
+
+	switch (asr_type) {
+	case ASMTYPE_TOPAZ:
+		/* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+		outb(0x07, 0x2e);
+		outb(0x07, 0x2f);
+
+		/* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x60, 0x2e);
+		high = inb(0x2f);
+
+		/* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x61, 0x2e);
+		low = inb(0x2f);
+
+		asr_base = (high << 16) | low;
+		asr_read_addr = asr_write_addr =
+			asr_base + TOPAZ_ASR_REG_OFFSET;
+		asr_length = 5;
+
+		break;
+
+	case ASMTYPE_JASPER:
+		type = "Jaspers ";
+
+		/* FIXME: need to use pci_config_lock here, but it's not exported */
+
+/*		spin_lock_irqsave(&pci_config_lock, flags);*/
+
+		/* Select the SuperIO chip in the PCI I/O port register */
+		outl(0x8000f858, 0xcf8);
+
+		/*
+		 * Read the base address for the SuperIO chip.
+		 * Only the lower 16 bits are valid, but the address is word
+		 * aligned so the last bit must be masked off.
+		 */
+		asr_base = inl(0xcfc) & 0xfffe;
+
+/*		spin_unlock_irqrestore(&pci_config_lock, flags);*/
+
+		asr_read_addr = asr_write_addr =
+			asr_base + JASPER_ASR_REG_OFFSET;
+		asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JASPER_ASR_DISABLE_MASK;
+		asr_length = JASPER_ASR_REG_OFFSET + 1;
+
+		break;
+
+	case ASMTYPE_PEARL:
+		type = "Pearls ";
+		asr_base = PEARL_BASE;
+		asr_read_addr = PEARL_READ;
+		asr_write_addr = PEARL_WRITE;
+		asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
+		asr_disable_mask = PEARL_ASR_DISABLE_MASK;
+		asr_length = 4;
+		break;
+
+	case ASMTYPE_JUNIPER:
+		type = "Junipers ";
+		asr_base = JUNIPER_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
+		break;
+
+	case ASMTYPE_SPRUCE:
+		type = "Spruce's ";
+		asr_base = SPRUCE_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
+		asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
+		break;
+	}
+
+	if (!request_region(asr_base, asr_length, "ibmasr")) {
+		printk(KERN_ERR PFX "address %#x already in use\n",
+			asr_base);
+		return -EBUSY;
+	}
+
+	printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base);
+
+	return 0;
+}
+
+
+static ssize_t asr_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			asr_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					asr_expect_close = 42;
+			}
+		}
+		asr_toggle();
+	}
+	return count;
+}
+
+static int asr_ioctl(struct inode *inode, struct file *file,
+		     unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info ident = {
+		.options =	WDIOF_KEEPALIVEPING | 
+				WDIOF_MAGICCLOSE,
+		.identity =	"IBM ASR"
+	};
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int heartbeat;
+
+	switch (cmd) {
+		case WDIOC_GETSUPPORT:
+			return copy_to_user(argp, &ident, sizeof(ident)) ?
+				-EFAULT : 0;
+
+		case WDIOC_GETSTATUS:
+		case WDIOC_GETBOOTSTATUS:
+			return put_user(0, p);
+
+		case WDIOC_KEEPALIVE:
+			asr_toggle();
+			return 0;
+
+		/*
+		 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+		 * and WDIOC_GETTIMEOUT always returns 256.
+		 */
+		case WDIOC_GETTIMEOUT:
+			heartbeat = 256;
+			return put_user(heartbeat, p);
+
+		case WDIOC_SETOPTIONS: {
+			int new_options, retval = -EINVAL;
+
+			if (get_user(new_options, p))
+				return -EFAULT;
+
+			if (new_options & WDIOS_DISABLECARD) {
+				asr_disable();
+				retval = 0;
+			}
+
+			if (new_options & WDIOS_ENABLECARD) {
+				asr_enable();
+				asr_toggle();
+				retval = 0;
+			}
+
+			return retval;
+		}
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static int asr_open(struct inode *inode, struct file *file)
+{
+	if(test_and_set_bit(0, &asr_is_open))
+		return -EBUSY;
+
+	asr_toggle();
+	asr_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int asr_release(struct inode *inode, struct file *file)
+{
+	if (asr_expect_close == 42)
+		asr_disable();
+	else {
+		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+		asr_toggle();
+	}
+	clear_bit(0, &asr_is_open);
+	asr_expect_close = 0;
+	return 0;
+}
+
+static struct file_operations asr_fops = {
+	.owner =	THIS_MODULE,
+	.llseek	=	no_llseek,
+	.write =	asr_write,
+	.ioctl =	asr_ioctl,
+	.open =		asr_open,
+	.release =	asr_release,
+};
+
+static struct miscdevice asr_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&asr_fops,
+};
+
+
+struct ibmasr_id {
+	const char *desc;
+	int type;
+};
+
+static struct ibmasr_id __initdata ibmasr_id_table[] = {
+	{ "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
+	{ "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
+	{ "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
+	{ "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
+	{ "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
+	{ NULL }
+};
+
+static int __init ibmasr_init(void)
+{
+	struct ibmasr_id *id;
+	int rc;
+
+	for (id = ibmasr_id_table; id->desc; id++) {
+		if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
+			asr_type = id->type;
+			break;
+		}
+	}
+
+	if (!asr_type)
+		return -ENODEV;
+
+	rc = misc_register(&asr_miscdev);
+	if (rc < 0) {
+		printk(KERN_ERR PFX "failed to register misc device\n");
+		return rc;
+	}
+
+	rc = asr_get_base_address();
+	if (rc) {
+		misc_deregister(&asr_miscdev);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit ibmasr_exit(void)
+{
+	if (!nowayout)
+		asr_disable();
+
+	misc_deregister(&asr_miscdev);
+
+	release_region(asr_base, asr_length);
+}
+
+module_init(ibmasr_init);
+module_exit(ibmasr_exit);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
+MODULE_AUTHOR("Andrey Panin");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/mv64x60_wdt.c b/drivers/char/watchdog/mv64x60_wdt.c
new file mode 100644
index 0000000..1436aea
--- /dev/null
+++ b/drivers/char/watchdog/mv64x60_wdt.c
@@ -0,0 +1,252 @@
+/*
+ * mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ *
+ * Platform-specific setup code should configure the dog to generate
+ * interrupt or reset as required.  This code only enables/disables
+ * and services the watchdog.
+ *
+ * Derived from mpc8xx_wdt.c, with the following copyright.
+ * 
+ * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <asm/mv64x60.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/* MV64x60 WDC (config) register access definitions */
+#define MV64x60_WDC_CTL1_MASK	(3 << 24)
+#define MV64x60_WDC_CTL1(val)	((val & 3) << 24)
+#define MV64x60_WDC_CTL2_MASK	(3 << 26)
+#define MV64x60_WDC_CTL2(val)	((val & 3) << 26)
+
+/* Flags bits */
+#define MV64x60_WDOG_FLAG_OPENED	0
+#define MV64x60_WDOG_FLAG_ENABLED	1
+
+static unsigned long wdt_flags;
+static int wdt_status;
+static void __iomem *mv64x60_regs;
+static int mv64x60_wdt_timeout;
+
+static void mv64x60_wdt_reg_write(u32 val)
+{
+	/* Allow write only to CTL1 / CTL2 fields, retaining values in
+	 * other fields.
+	 */
+	u32 data = readl(mv64x60_regs + MV64x60_WDT_WDC);
+	data &= ~(MV64x60_WDC_CTL1_MASK | MV64x60_WDC_CTL2_MASK);
+	data |= val;
+	writel(data, mv64x60_regs + MV64x60_WDT_WDC);
+}
+
+static void mv64x60_wdt_service(void)
+{
+	/* Write 01 followed by 10 to CTL2 */
+	mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x01));
+	mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x02));
+}
+
+static void mv64x60_wdt_handler_disable(void)
+{
+	if (test_and_clear_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
+		/* Write 01 followed by 10 to CTL1 */
+		mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
+		mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
+		printk(KERN_NOTICE "mv64x60_wdt: watchdog deactivated\n");
+	}
+}
+
+static void mv64x60_wdt_handler_enable(void)
+{
+	if (!test_and_set_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
+		/* Write 01 followed by 10 to CTL1 */
+		mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
+		mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
+		printk(KERN_NOTICE "mv64x60_wdt: watchdog activated\n");
+	}
+}
+
+static int mv64x60_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
+		return -EBUSY;
+
+	mv64x60_wdt_service();
+	mv64x60_wdt_handler_enable();
+
+	return 0;
+}
+
+static int mv64x60_wdt_release(struct inode *inode, struct file *file)
+{
+	mv64x60_wdt_service();
+
+#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
+	mv64x60_wdt_handler_disable();
+#endif
+
+	clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags);
+
+	return 0;
+}
+
+static ssize_t mv64x60_wdt_write(struct file *file, const char *data,
+				 size_t len, loff_t * ppos)
+{
+	if (*ppos != file->f_pos)
+		return -ESPIPE;
+
+	if (len)
+		mv64x60_wdt_service();
+
+	return len;
+}
+
+static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	int timeout;
+	static struct watchdog_info info = {
+		.options = WDIOF_KEEPALIVEPING,
+		.firmware_version = 0,
+		.identity = "MV64x60 watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((void *)arg, &info, sizeof(info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(wdt_status, (int *)arg))
+			return -EFAULT;
+		wdt_status &= ~WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_GETTEMP:
+		return -EOPNOTSUPP;
+
+	case WDIOC_SETOPTIONS:
+		return -EOPNOTSUPP;
+
+	case WDIOC_KEEPALIVE:
+		mv64x60_wdt_service();
+		wdt_status |= WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		return -EOPNOTSUPP;
+
+	case WDIOC_GETTIMEOUT:
+		timeout = mv64x60_wdt_timeout * HZ;
+		if (put_user(timeout, (int *)arg))
+			return -EFAULT;
+		break;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
+static struct file_operations mv64x60_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = mv64x60_wdt_write,
+	.ioctl = mv64x60_wdt_ioctl,
+	.open = mv64x60_wdt_open,
+	.release = mv64x60_wdt_release,
+};
+
+static struct miscdevice mv64x60_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &mv64x60_wdt_fops,
+};
+
+static int __devinit mv64x60_wdt_probe(struct device *dev)
+{
+	struct platform_device *pd = to_platform_device(dev);
+	struct mv64x60_wdt_pdata *pdata = pd->dev.platform_data;
+	int bus_clk = 133;
+
+	mv64x60_wdt_timeout = 10;
+	if (pdata) {
+		mv64x60_wdt_timeout = pdata->timeout;
+		bus_clk = pdata->bus_clk;
+	}
+
+	mv64x60_regs = mv64x60_get_bridge_vbase();
+
+	writel((mv64x60_wdt_timeout * (bus_clk * 1000000)) >> 8,
+	       mv64x60_regs + MV64x60_WDT_WDC);
+
+	return misc_register(&mv64x60_wdt_miscdev);
+}
+
+static int __devexit mv64x60_wdt_remove(struct device *dev)
+{
+	misc_deregister(&mv64x60_wdt_miscdev);
+
+	mv64x60_wdt_service();
+	mv64x60_wdt_handler_disable();
+
+	return 0;
+}
+
+static struct device_driver mv64x60_wdt_driver = {
+	.name = MV64x60_WDT_NAME,
+	.bus = &platform_bus_type,
+	.probe = mv64x60_wdt_probe,
+	.remove = __devexit_p(mv64x60_wdt_remove),
+};
+
+static struct platform_device *mv64x60_wdt_dev;
+
+static int __init mv64x60_wdt_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "MV64x60 watchdog driver\n");
+
+	mv64x60_wdt_dev = platform_device_register_simple(MV64x60_WDT_NAME,
+							  -1, NULL, 0);
+	if (IS_ERR(mv64x60_wdt_dev)) {
+		ret = PTR_ERR(mv64x60_wdt_dev);
+		goto out;
+	}
+
+	ret = driver_register(&mv64x60_wdt_driver);
+      out:
+	return ret;
+}
+
+static void __exit mv64x60_wdt_exit(void)
+{
+	driver_unregister(&mv64x60_wdt_driver);
+	platform_device_unregister(mv64x60_wdt_dev);
+}
+
+module_init(mv64x60_wdt_init);
+module_exit(mv64x60_wdt_exit);
+
+MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("MV64x60 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c
index 2b13afb..5a80adb 100644
--- a/drivers/char/watchdog/pcwd_pci.c
+++ b/drivers/char/watchdog/pcwd_pci.c
@@ -29,27 +29,29 @@
  *	Includes, defines, variables, module parameters, ...
  */
 
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/config.h>	/* For CONFIG_WATCHDOG_NOWAYOUT/... */
+#include <linux/module.h>	/* For module specific items */
+#include <linux/moduleparam.h>	/* For new moduleparam's */
+#include <linux/types.h>	/* For standard types (like size_t) */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/delay.h>	/* For mdelay function */
+#include <linux/miscdevice.h>	/* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/watchdog.h>	/* For the watchdog specific items */
+#include <linux/notifier.h>	/* For notifier support */
+#include <linux/reboot.h>	/* For reboot_notifier stuff */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/fs.h>		/* For file operations */
+#include <linux/pci.h>		/* For pci functions */
+#include <linux/ioport.h>	/* For io-port access */
+#include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
+
+#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <asm/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
 #define WATCHDOG_VERSION "1.01"
-#define WATCHDOG_DATE "15 Mar 2005"
+#define WATCHDOG_DATE "02 Sep 2005"
 #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
 #define WATCHDOG_NAME "pcwd_pci"
 #define PFX WATCHDOG_NAME ": "
@@ -335,12 +337,14 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
 				return -EFAULT;
 
 			if (new_options & WDIOS_DISABLECARD) {
-				pcipcwd_stop();
+				if (pcipcwd_stop())
+					return -EIO;
 				retval = 0;
 			}
 
 			if (new_options & WDIOS_ENABLECARD) {
-				pcipcwd_start();
+				if (pcipcwd_start())
+					return -EIO;
 				retval = 0;
 			}
 
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 8b292bf..3625b26 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -464,7 +464,7 @@ static void s3c2410wdt_shutdown(struct device *dev)
 static unsigned long wtcon_save;
 static unsigned long wtdat_save;
 
-static int s3c2410wdt_suspend(struct device *dev, u32 state, u32 level)
+static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		/* Save watchdog state, and turn it off. */
diff --git a/drivers/char/watchdog/sbc8360.c b/drivers/char/watchdog/sbc8360.c
new file mode 100644
index 0000000..c6cbf80
--- /dev/null
+++ b/drivers/char/watchdog/sbc8360.c
@@ -0,0 +1,414 @@
+/*
+ *	SBC8360 Watchdog driver
+ *
+ *	(c) Copyright 2005 Webcon, Inc.
+ *
+ *	Based on ib700wdt.c, which is based on advantechwdt.c which is based
+ *      on acquirewdt.c which is based on wdt.c.
+ *
+ *	(c) Copyright 2001 Charles Howes <chowes@vsol.net>
+ *
+ *      Based on advantechwdt.c which is based on acquirewdt.c which
+ *       is based on wdt.c.
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	Based on acquirewdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *				http://www.redhat.com
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *
+ *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *           Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *           Added timeout module option to override default
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static unsigned long sbc8360_is_open;
+static spinlock_t sbc8360_lock;
+static char expect_close;
+
+#define PFX "sbc8360: "
+
+/*
+ *
+ * Watchdog Timer Configuration
+ *
+ * The function of the watchdog timer is to reset the system automatically
+ * and is defined at I/O port 0120H and 0121H.  To enable the watchdog timer
+ * and allow the system to reset, write appropriate values from the table
+ * below to I/O port 0120H and 0121H.  To disable the timer, write a zero
+ * value to I/O port 0121H for the system to stop the watchdog function.
+ *
+ * The following describes how the timer should be programmed (according to
+ * the vendor documentation)
+ *
+ * Enabling Watchdog:
+ * MOV AX,000AH (enable, phase I)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000BH (enable, phase II)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000nH (set multiplier n, from 1-4)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000mH (set base timer m, from 0-F)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Reset timer:
+ * MOV AX,000mH (same as set base timer, above)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Disabling Watchdog:
+ * MOV AX,0000H (a zero value)
+ * MOV DX,0120H
+ * OUT DX,AX
+ *
+ * Watchdog timeout configuration values:
+ *		N
+ *	M |	1	2	3	4
+ *	--|----------------------------------
+ *	0 |	0.5s	5s	50s	100s
+ *	1 |	1s	10s	100s	200s
+ *	2 |	1.5s	15s	150s	300s
+ *	3 |	2s	20s	200s	400s
+ *	4 |	2.5s	25s	250s	500s
+ *	5 |	3s	30s	300s	600s
+ *	6 |	3.5s	35s	350s	700s
+ *	7 |	4s	40s	400s	800s
+ *	8 |	4.5s	45s	450s	900s
+ *	9 |	5s	50s	500s	1000s
+ *	A |	5.5s	55s	550s	1100s
+ *	B |	6s	60s	600s	1200s
+ *	C |	6.5s	65s	650s	1300s
+ *	D |	7s	70s	700s	1400s
+ *	E |	7.5s	75s	750s	1500s
+ *	F |	8s	80s 	800s 	1600s
+ *
+ * Another way to say the same things is:
+ *  For N=1, Timeout = (M+1) * 0.5s
+ *  For N=2, Timeout = (M+1) * 5s
+ *  For N=3, Timeout = (M+1) * 50s
+ *  For N=4, Timeout = (M+1) * 100s
+ *
+ */
+
+static int wd_times[64][2] = {
+	{0, 1},			/* 0  = 0.5s */
+	{1, 1},			/* 1  = 1s   */
+	{2, 1},			/* 2  = 1.5s */
+	{3, 1},			/* 3  = 2s   */
+	{4, 1},			/* 4  = 2.5s */
+	{5, 1},			/* 5  = 3s   */
+	{6, 1},			/* 6  = 3.5s */
+	{7, 1},			/* 7  = 4s   */
+	{8, 1},			/* 8  = 4.5s */
+	{9, 1},			/* 9  = 5s   */
+	{0xA, 1},		/* 10 = 5.5s */
+	{0xB, 1},		/* 11 = 6s   */
+	{0xC, 1},		/* 12 = 6.5s */
+	{0xD, 1},		/* 13 = 7s   */
+	{0xE, 1},		/* 14 = 7.5s */
+	{0xF, 1},		/* 15 = 8s   */
+	{0, 2},			/* 16 = 5s  */
+	{1, 2},			/* 17 = 10s */
+	{2, 2},			/* 18 = 15s */
+	{3, 2},			/* 19 = 20s */
+	{4, 2},			/* 20 = 25s */
+	{5, 2},			/* 21 = 30s */
+	{6, 2},			/* 22 = 35s */
+	{7, 2},			/* 23 = 40s */
+	{8, 2},			/* 24 = 45s */
+	{9, 2},			/* 25 = 50s */
+	{0xA, 2},		/* 26 = 55s */
+	{0xB, 2},		/* 27 = 60s */
+	{0xC, 2},		/* 28 = 65s */
+	{0xD, 2},		/* 29 = 70s */
+	{0xE, 2},		/* 30 = 75s */
+	{0xF, 2},		/* 31 = 80s */
+	{0, 3},			/* 32 = 50s  */
+	{1, 3},			/* 33 = 100s */
+	{2, 3},			/* 34 = 150s */
+	{3, 3},			/* 35 = 200s */
+	{4, 3},			/* 36 = 250s */
+	{5, 3},			/* 37 = 300s */
+	{6, 3},			/* 38 = 350s */
+	{7, 3},			/* 39 = 400s */
+	{8, 3},			/* 40 = 450s */
+	{9, 3},			/* 41 = 500s */
+	{0xA, 3},		/* 42 = 550s */
+	{0xB, 3},		/* 43 = 600s */
+	{0xC, 3},		/* 44 = 650s */
+	{0xD, 3},		/* 45 = 700s */
+	{0xE, 3},		/* 46 = 750s */
+	{0xF, 3},		/* 47 = 800s */
+	{0, 4},			/* 48 = 100s */
+	{1, 4},			/* 49 = 200s */
+	{2, 4},			/* 50 = 300s */
+	{3, 4},			/* 51 = 400s */
+	{4, 4},			/* 52 = 500s */
+	{5, 4},			/* 53 = 600s */
+	{6, 4},			/* 54 = 700s */
+	{7, 4},			/* 55 = 800s */
+	{8, 4},			/* 56 = 900s */
+	{9, 4},			/* 57 = 1000s */
+	{0xA, 4},		/* 58 = 1100s */
+	{0xB, 4},		/* 59 = 1200s */
+	{0xC, 4},		/* 60 = 1300s */
+	{0xD, 4},		/* 61 = 1400s */
+	{0xE, 4},		/* 62 = 1500s */
+	{0xF, 4}		/* 63 = 1600s */
+};
+
+#define SBC8360_ENABLE 0x120
+#define SBC8360_BASETIME 0x121
+
+static int timeout = 27;
+static int wd_margin = 0xB;
+static int wd_multiplier = 2;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, int, 27);
+MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ *	Kernel methods.
+ */
+
+/* Activate and pre-configure watchdog */
+static void sbc8360_activate(void)
+{
+	/* Enable the watchdog */
+	outb(0x0A, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	outb(0x0B, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	/* Set timeout multiplier */
+	outb(wd_multiplier, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	/* Nothing happens until first sbc8360_ping() */
+}
+
+/* Kernel pings watchdog */
+static void sbc8360_ping(void)
+{
+	/* Write the base timer register */
+	outb(wd_margin, SBC8360_BASETIME);
+}
+
+/* Userspace pings kernel driver, or requests clean close */
+static ssize_t sbc8360_write(struct file *file, const char __user * buf,
+			     size_t count, loff_t * ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		sbc8360_ping();
+	}
+	return count;
+}
+
+static int sbc8360_open(struct inode *inode, struct file *file)
+{
+	spin_lock(&sbc8360_lock);
+	if (test_and_set_bit(0, &sbc8360_is_open)) {
+		spin_unlock(&sbc8360_lock);
+		return -EBUSY;
+	}
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate and ping once to start the countdown */
+	spin_unlock(&sbc8360_lock);
+	sbc8360_activate();
+	sbc8360_ping();
+	return nonseekable_open(inode, file);
+}
+
+static int sbc8360_close(struct inode *inode, struct file *file)
+{
+	spin_lock(&sbc8360_lock);
+	if (expect_close == 42)
+		outb(0, SBC8360_ENABLE);
+	else
+		printk(KERN_CRIT PFX
+		       "SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+
+	clear_bit(0, &sbc8360_is_open);
+	expect_close = 0;
+	spin_unlock(&sbc8360_lock);
+	return 0;
+}
+
+/*
+ *	Notifier for system down
+ */
+
+static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
+			      void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/* Disable the SBC8360 Watchdog */
+		outb(0, SBC8360_ENABLE);
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static struct file_operations sbc8360_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = sbc8360_write,
+	.open = sbc8360_open,
+	.release = sbc8360_close,
+};
+
+static struct miscdevice sbc8360_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &sbc8360_fops,
+};
+
+/*
+ *	The SBC8360 needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block sbc8360_notifier = {
+	.notifier_call = sbc8360_notify_sys,
+};
+
+static int __init sbc8360_init(void)
+{
+	int res;
+	unsigned long int mseconds = 60000;
+
+	spin_lock_init(&sbc8360_lock);
+	res = misc_register(&sbc8360_miscdev);
+	if (res) {
+		printk(KERN_ERR PFX "failed to register misc device\n");
+		goto out_nomisc;
+	}
+
+	if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
+		printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n",
+		       SBC8360_ENABLE);
+		res = -EIO;
+		goto out_noenablereg;
+	}
+	if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
+		printk(KERN_ERR PFX
+		       "BASETIME method I/O %X is not available.\n",
+		       SBC8360_BASETIME);
+		res = -EIO;
+		goto out_nobasetimereg;
+	}
+
+	res = register_reboot_notifier(&sbc8360_notifier);
+	if (res) {
+		printk(KERN_ERR PFX "Failed to register reboot notifier.\n");
+		goto out_noreboot;
+	}
+
+	if (timeout < 0 || timeout > 63) {
+		printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
+		res = -EINVAL;
+		goto out_noreboot;
+	}
+
+	wd_margin = wd_times[timeout][0];
+	wd_multiplier = wd_times[timeout][1];
+
+	if (wd_multiplier == 1)
+		mseconds = (wd_margin + 1) * 500;
+	else if (wd_multiplier == 2)
+		mseconds = (wd_margin + 1) * 5000;
+	else if (wd_multiplier == 3)
+		mseconds = (wd_margin + 1) * 50000;
+	else if (wd_multiplier == 4)
+		mseconds = (wd_margin + 1) * 100000;
+
+	/* My kingdom for the ability to print "0.5 seconds" in the kernel! */
+	printk(KERN_INFO PFX "Timeout set at %ld ms.\n", mseconds);
+
+	return 0;
+
+      out_noreboot:
+	release_region(SBC8360_ENABLE, 1);
+	release_region(SBC8360_BASETIME, 1);
+      out_noenablereg:
+      out_nobasetimereg:
+	misc_deregister(&sbc8360_miscdev);
+      out_nomisc:
+	return res;
+}
+
+static void __exit sbc8360_exit(void)
+{
+	misc_deregister(&sbc8360_miscdev);
+	unregister_reboot_notifier(&sbc8360_notifier);
+	release_region(SBC8360_ENABLE, 1);
+	release_region(SBC8360_BASETIME, 1);
+}
+
+module_init(sbc8360_init);
+module_exit(sbc8360_exit);
+
+MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
+MODULE_DESCRIPTION("SBC8360 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+/* end of sbc8360.c */
diff --git a/drivers/char/watchdog/w83977f_wdt.c b/drivers/char/watchdog/w83977f_wdt.c
new file mode 100644
index 0000000..a7ff64c
--- /dev/null
+++ b/drivers/char/watchdog/w83977f_wdt.c
@@ -0,0 +1,543 @@
+/*
+ *	W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
+ *
+ *	(c) Copyright 2005  Jose Goncalves <jose.goncalves@inov.pt>
+ *
+ *      Based on w83877f_wdt.c by Scott Jennings,
+ *           and wdt977.c by Woody Suwalski
+ *
+ *			-----------------------
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#define WATCHDOG_VERSION  "1.00"
+#define WATCHDOG_NAME     "W83977F WDT"
+#define PFX WATCHDOG_NAME ": "
+#define DRIVER_VERSION    WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
+
+#define IO_INDEX_PORT     0x3F0
+#define IO_DATA_PORT      (IO_INDEX_PORT+1)
+
+#define UNLOCK_DATA       0x87
+#define LOCK_DATA         0xAA
+#define DEVICE_REGISTER   0x07
+
+#define	DEFAULT_TIMEOUT   45		/* default timeout in seconds */
+
+static	int timeout = DEFAULT_TIMEOUT;
+static	int timeoutW;			/* timeout in watchdog counter units */
+static	unsigned long timer_alive;
+static	int testmode;
+static	char expect_close;
+static	spinlock_t spinlock;
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Start the watchdog
+ */
+
+static int wdt_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+	/*
+	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+	 * F2 has the timeout in watchdog counter units.
+	 * F3 is set to enable watchdog LED blink at timeout.
+	 * F4 is used to just clear the TIMEOUT'ed state (bit 0).
+	 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xF2,IO_INDEX_PORT);
+	outb_p(timeoutW,IO_DATA_PORT);
+	outb_p(0xF3,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xF4,IO_INDEX_PORT);
+	outb_p(0x00,IO_DATA_PORT);
+
+	/* Set device Aux2 active */
+	outb_p(0x30,IO_INDEX_PORT);
+	outb_p(0x01,IO_DATA_PORT);
+
+	/* 
+	 * Select device Aux1 (dev=7) to set GP16 as the watchdog output
+	 * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
+	 * Map GP16 at pin 119.
+	 * In test mode watch the bit 0 on F4 to indicate "triggered" or
+	 * check watchdog LED on SBC.
+	 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x07,IO_DATA_PORT);
+	if (!testmode)
+	{
+		unsigned pin_map;
+
+		outb_p(0xE6,IO_INDEX_PORT);
+		outb_p(0x0A,IO_DATA_PORT);
+		outb_p(0x2C,IO_INDEX_PORT);
+		pin_map = inb_p(IO_DATA_PORT);
+		pin_map |= 0x10;
+		pin_map &= ~(0x20);
+		outb_p(0x2C,IO_INDEX_PORT);
+		outb_p(pin_map,IO_DATA_PORT);
+	}
+	outb_p(0xE3,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+
+	/* Set device Aux1 active */
+	outb_p(0x30,IO_INDEX_PORT);
+	outb_p(0x01,IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	printk(KERN_INFO PFX "activated.\n");
+
+	return 0;
+}
+
+/*
+ * Stop the watchdog
+ */
+
+static int wdt_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+	/* 
+	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+	 * F2 is reset to its default value (watchdog timer disabled).
+	 * F3 is reset to its default state.
+	 * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
+	 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xF2,IO_INDEX_PORT);
+	outb_p(0xFF,IO_DATA_PORT);
+	outb_p(0xF3,IO_INDEX_PORT);
+	outb_p(0x00,IO_DATA_PORT);
+	outb_p(0xF4,IO_INDEX_PORT);
+	outb_p(0x00,IO_DATA_PORT);
+	outb_p(0xF2,IO_INDEX_PORT);
+	outb_p(0x00,IO_DATA_PORT);
+
+	/*
+	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and 
+	 * Gp13 (in reg E3) as inputs.
+	 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x07,IO_DATA_PORT);
+	if (!testmode)
+	{
+		outb_p(0xE6,IO_INDEX_PORT);
+		outb_p(0x01,IO_DATA_PORT);
+	}
+	outb_p(0xE3,IO_INDEX_PORT);
+	outb_p(0x01,IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	printk(KERN_INFO PFX "shutdown.\n");
+
+	return 0;
+}
+
+/*
+ * Send a keepalive ping to the watchdog
+ * This is done by simply re-writing the timeout to reg. 0xF2
+ */
+
+static int wdt_keepalive(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+	/* Select device Aux2 (device=8) to kick watchdog reg F2 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xF2,IO_INDEX_PORT);
+	outb_p(timeoutW,IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	return 0;
+}
+
+/*
+ * Set the watchdog timeout value
+ */
+
+static int wdt_set_timeout(int t)
+{
+	int tmrval;
+
+	/*
+	 * Convert seconds to watchdog counter time units, rounding up.
+	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup 
+	 * value. This information is supplied in the PCM-5335 manual and was
+	 * checked by me on a real board. This is a bit strange because W83977f
+	 * datasheet says counter unit is in minutes!
+	 */
+	if (t < 15)
+		return -EINVAL;
+
+	tmrval = ((t + 15) + 29) / 30;
+
+	if (tmrval > 255)
+		return -EINVAL;
+
+	/*
+	 * timeout is the timeout in seconds, 
+	 * timeoutW is the timeout in watchdog counter units.
+	 */
+	timeoutW = tmrval;
+	timeout = (timeoutW * 30) - 15;
+	return 0;
+}
+
+/*
+ * Get the watchdog status
+ */
+
+static int wdt_get_status(int *status)
+{
+	int new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+	/* Select device Aux2 (device=8) to read watchdog reg F4 */
+	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xF4,IO_INDEX_PORT);
+	new_status = inb_p(IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	*status = 0;
+	if (new_status & 1)
+		*status |= WDIOF_CARDRESET;
+
+	return 0;
+}
+
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+	/* If the watchdog is alive we don't need to start it again */
+	if( test_and_set_bit(0, &timer_alive) )
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+	/*
+	 * Shut off the timer.
+	 * Lock it in if it's a module and we set nowayout
+	 */
+	if (expect_close == 42)
+	{
+		wdt_stop();
+		clear_bit(0, &timer_alive);
+	} else {
+		wdt_keepalive();
+		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+	}
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *      wdt_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write (unused as data does not matter here
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if(count)
+	{
+		if (!nowayout)
+		{
+			size_t ofs;
+
+			/* note: just in case someone wrote the magic character long ago */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the magic character */
+			for(ofs = 0; ofs != count; ofs++)
+			{
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V') {
+					expect_close = 42;
+				}
+			}
+		}
+
+		/* someone wrote to us, we should restart timer */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+/*
+ *      wdt_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+
+static struct watchdog_info ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity = WATCHDOG_NAME,
+};
+
+static int wdt_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	int status;
+	int new_options, retval = -EINVAL;
+	int new_timeout;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	uarg.i = (int __user *)arg;
+
+	switch(cmd)
+	{
+	default:
+		return -ENOIOCTLCMD;
+
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		wdt_get_status(&status);
+		return put_user(status, uarg.i);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user (new_options, uarg.i))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_stop();
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_start();
+			retval = 0;
+		}
+
+		return retval;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+
+		if (wdt_set_timeout(new_timeout))
+		    return -EINVAL;
+
+		wdt_keepalive();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, uarg.i);
+
+	}
+}
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code==SYS_DOWN || code==SYS_HALT)
+		wdt_stop();
+	return NOTIFY_DONE;
+}
+
+static struct file_operations wdt_fops=
+{
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt_write,
+	.ioctl		= wdt_ioctl,
+	.open		= wdt_open,
+	.release	= wdt_release,
+};
+
+static struct miscdevice wdt_miscdev=
+{
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wdt_fops,
+};
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static int __init w83977f_wdt_init(void)
+{
+	int rc;
+
+        printk(KERN_INFO PFX DRIVER_VERSION);
+
+	spin_lock_init(&spinlock);
+
+	/*
+	 * Check that the timeout value is within it's range ; 
+	 * if not reset to the default
+	 */
+	if (wdt_set_timeout(timeout)) {
+		wdt_set_timeout(DEFAULT_TIMEOUT);
+		printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
+			DEFAULT_TIMEOUT);
+	}
+
+	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
+	{
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
+			IO_INDEX_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc)
+	{
+		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+			wdt_miscdev.minor, rc);
+		goto err_out_region;
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc)
+	{
+		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+			rc);
+		goto err_out_miscdev;
+	}
+
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+		timeout, nowayout, testmode);
+
+	return 0;
+
+err_out_miscdev:
+	misc_deregister(&wdt_miscdev);
+err_out_region:
+	release_region(IO_INDEX_PORT,2);
+err_out:
+	return rc;
+}
+
+static void __exit w83977f_wdt_exit(void)
+{
+	wdt_stop();
+	misc_deregister(&wdt_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(IO_INDEX_PORT,2);
+}
+
+module_init(w83977f_wdt_init);
+module_exit(w83977f_wdt_exit);
+
+MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
+MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);