tty: move obsolete and broken tty drivers to drivers/staging/tty/

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
	epca
	epca
	ip2
	istallion
	riscom8
	serial167
	specialix
	stallion

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

27 files changed, 0 insertions, 28968 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 1adfac6..7b8cf02 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -15,63 +15,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config COMPUTONE
-	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This driver supports the entire family of Intelliport II/Plus
-	  controllers with the exception of the MicroChannel controllers and
-	  products previous to the Intelliport II. These are multiport cards,
-	  which give you many serial ports. You would need something like this
-	  to connect more than two modems to your Linux box, for instance in
-	  order to become a dial-in server. If you have a card like that, say
-	  Y here and read <file:Documentation/serial/computone.txt>.
-
-	  To compile this driver as module, choose M here: the
-	  module will be called ip2.
-
-config DIGIEPCA
-	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This is a driver for Digi International's Xx, Xeve, and Xem series
-	  of cards which provide multiple serial ports. You would need
-	  something like this to connect more than two modems to your Linux
-	  box, for instance in order to become a dial-in server. This driver
-	  supports the original PC (ISA) boards as well as PCI, and EISA. If
-	  you have a card like this, say Y here and read the file
-	  <file:Documentation/serial/digiepca.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called epca.
-
-config RISCOM8
-	tristate "SDL RISCom/8 card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the SDL Communications RISCom/8 multiport card,
-	  which gives you many serial ports. You would need something like
-	  this to connect more than two modems to your Linux box, for instance
-	  in order to become a dial-in server. If you have a card like that,
-	  say Y here and read the file <file:Documentation/serial/riscom8.txt>.
-
-	  Also it's possible to say M here and compile this driver as kernel
-	  loadable module; the module will be called riscom8.
-
-config SPECIALIX
-	tristate "Specialix IO8+ card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the Specialix IO8+ multiport card (both the
-	  ISA and the PCI version) which gives you many serial ports. You
-	  would need something like this to connect more than two modems to
-	  your Linux box, for instance in order to become a dial-in server.
-
-	  If you have a card like that, say Y here and read the file
-	  <file:Documentation/serial/specialix.txt>. Also it's possible to say
-	  M here and compile this driver as kernel loadable module which will be
-	  called specialix.
-
 config SX
 	tristate "Specialix SX (and SI) card support"
 	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
@@ -112,28 +55,6 @@ config STALDRV
 	  in this case.  If you have never heard about all this, it's safe to
 	  say N.
 
-config STALLION
-	tristate "Stallion EasyIO or EC8/32 support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
-	  card, then this is for you; say Y.  Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called stallion.
-
-config ISTALLION
-	tristate "Stallion EC8/64, ONboard, Brumby support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
-	  serial multiport card, say Y here. Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called istallion.
-
 config A2232
 	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ZORRO && BROKEN
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f5dc7c9..48bb8ac 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -8,15 +8,8 @@ obj-y				+= misc.o
 obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_SERIAL167)		+= serial167.o
-obj-$(CONFIG_STALLION)		+= stallion.o
-obj-$(CONFIG_ISTALLION)		+= istallion.o
-obj-$(CONFIG_DIGIEPCA)		+= epca.o
-obj-$(CONFIG_SPECIALIX)		+= specialix.o
 obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
 obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
-obj-$(CONFIG_COMPUTONE)		+= ip2/
-obj-$(CONFIG_RISCOM8)		+= riscom8.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
deleted file mode 100644
index 7ad3638..0000000
--- a/drivers/char/epca.c
+++ /dev/null
@@ -1,2784 +0,0 @@
-/*
-	Copyright (C) 1996  Digi International.
-
-	For technical support please email digiLinux@dgii.com or
-	call Digi tech support at (612) 912-3456
-
-	** This driver is no longer supported by Digi **
-
-	Much of this design and code came from epca.c which was
-	copyright (C) 1994, 1995 Troy De Jongh, and subsquently
-	modified by David Nugent, Christoph Lameter, Mike McLagan.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/* See README.epca for change history --DAT*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-#include <linux/ctype.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include "digiPCI.h"
-
-
-#include "digi1.h"
-#include "digiFep1.h"
-#include "epca.h"
-#include "epcaconfig.h"
-
-#define VERSION            "1.3.0.1-LK2.6"
-
-/* This major needs to be submitted to Linux to join the majors list */
-#define DIGIINFOMAJOR       35  /* For Digi specific ioctl */
-
-
-#define MAXCARDS 7
-#define epcaassert(x, msg)  if (!(x)) epca_error(__LINE__, msg)
-
-#define PFX "epca: "
-
-static int nbdevs, num_cards, liloconfig;
-static int digi_poller_inhibited = 1 ;
-
-static int setup_error_code;
-static int invalid_lilo_config;
-
-/*
- * The ISA boards do window flipping into the same spaces so its only sane with
- * a single lock. It's still pretty efficient. This lock guards the hardware
- * and the tty_port lock guards the kernel side stuff like use counts. Take
- * this lock inside the port lock if you must take both.
- */
-static DEFINE_SPINLOCK(epca_lock);
-
-/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted
-   to 7 below. */
-static struct board_info boards[MAXBOARDS];
-
-static struct tty_driver *pc_driver;
-static struct tty_driver *pc_info;
-
-/* ------------------ Begin Digi specific structures -------------------- */
-
-/*
- * digi_channels represents an array of structures that keep track of each
- * channel of the Digi product. Information such as transmit and receive
- * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored
- * here. This structure is NOT used to overlay the cards physical channel
- * structure.
- */
-static struct channel digi_channels[MAX_ALLOC];
-
-/*
- * card_ptr is an array used to hold the address of the first channel structure
- * of each card. This array will hold the addresses of various channels located
- * in digi_channels.
- */
-static struct channel *card_ptr[MAXCARDS];
-
-static struct timer_list epca_timer;
-
-/*
- * Begin generic memory functions. These functions will be alias (point at)
- * more specific functions dependent on the board being configured.
- */
-static void memwinon(struct board_info *b, unsigned int win);
-static void memwinoff(struct board_info *b, unsigned int win);
-static void globalwinon(struct channel *ch);
-static void rxwinon(struct channel *ch);
-static void txwinon(struct channel *ch);
-static void memoff(struct channel *ch);
-static void assertgwinon(struct channel *ch);
-static void assertmemoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for cx_like products --- */
-
-static void pcxem_memwinon(struct board_info *b, unsigned int win);
-static void pcxem_memwinoff(struct board_info *b, unsigned int win);
-static void pcxem_globalwinon(struct channel *ch);
-static void pcxem_rxwinon(struct channel *ch);
-static void pcxem_txwinon(struct channel *ch);
-static void pcxem_memoff(struct channel *ch);
-
-/* ------ Begin more 'specific' memory functions for the pcxe ------- */
-
-static void pcxe_memwinon(struct board_info *b, unsigned int win);
-static void pcxe_memwinoff(struct board_info *b, unsigned int win);
-static void pcxe_globalwinon(struct channel *ch);
-static void pcxe_rxwinon(struct channel *ch);
-static void pcxe_txwinon(struct channel *ch);
-static void pcxe_memoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */
-/* Note : pc64xe and pcxi share the same windowing routines */
-
-static void pcxi_memwinon(struct board_info *b, unsigned int win);
-static void pcxi_memwinoff(struct board_info *b, unsigned int win);
-static void pcxi_globalwinon(struct channel *ch);
-static void pcxi_rxwinon(struct channel *ch);
-static void pcxi_txwinon(struct channel *ch);
-static void pcxi_memoff(struct channel *ch);
-
-/* - Begin 'specific' do nothing memory functions needed for some cards - */
-
-static void dummy_memwinon(struct board_info *b, unsigned int win);
-static void dummy_memwinoff(struct board_info *b, unsigned int win);
-static void dummy_globalwinon(struct channel *ch);
-static void dummy_rxwinon(struct channel *ch);
-static void dummy_txwinon(struct channel *ch);
-static void dummy_memoff(struct channel *ch);
-static void dummy_assertgwinon(struct channel *ch);
-static void dummy_assertmemoff(struct channel *ch);
-
-static struct channel *verifyChannel(struct tty_struct *);
-static void pc_sched_event(struct channel *, int);
-static void epca_error(int, char *);
-static void pc_close(struct tty_struct *, struct file *);
-static void shutdown(struct channel *, struct tty_struct *tty);
-static void pc_hangup(struct tty_struct *);
-static int pc_write_room(struct tty_struct *);
-static int pc_chars_in_buffer(struct tty_struct *);
-static void pc_flush_buffer(struct tty_struct *);
-static void pc_flush_chars(struct tty_struct *);
-static int pc_open(struct tty_struct *, struct file *);
-static void post_fep_init(unsigned int crd);
-static void epcapoll(unsigned long);
-static void doevent(int);
-static void fepcmd(struct channel *, int, int, int, int, int);
-static unsigned termios2digi_h(struct channel *ch, unsigned);
-static unsigned termios2digi_i(struct channel *ch, unsigned);
-static unsigned termios2digi_c(struct channel *ch, unsigned);
-static void epcaparam(struct tty_struct *, struct channel *);
-static void receive_data(struct channel *, struct tty_struct *tty);
-static int pc_ioctl(struct tty_struct *,
-			unsigned int, unsigned long);
-static int info_ioctl(struct tty_struct *,
-			unsigned int, unsigned long);
-static void pc_set_termios(struct tty_struct *, struct ktermios *);
-static void do_softint(struct work_struct *work);
-static void pc_stop(struct tty_struct *);
-static void pc_start(struct tty_struct *);
-static void pc_throttle(struct tty_struct *tty);
-static void pc_unthrottle(struct tty_struct *tty);
-static int pc_send_break(struct tty_struct *tty, int msec);
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
-
-static int pc_write(struct tty_struct *, const unsigned char *, int);
-static int pc_init(void);
-static int init_PCI(void);
-
-/*
- * Table of functions for each board to handle memory. Mantaining parallelism
- * is a *very* good idea here. The idea is for the runtime code to blindly call
- * these functions, not knowing/caring about the underlying hardware. This
- * stuff should contain no conditionals; if more functionality is needed a
- * different entry should be established. These calls are the interface calls
- * and are the only functions that should be accessed. Anyone caught making
- * direct calls deserves what they get.
- */
-static void memwinon(struct board_info *b, unsigned int win)
-{
-	b->memwinon(b, win);
-}
-
-static void memwinoff(struct board_info *b, unsigned int win)
-{
-	b->memwinoff(b, win);
-}
-
-static void globalwinon(struct channel *ch)
-{
-	ch->board->globalwinon(ch);
-}
-
-static void rxwinon(struct channel *ch)
-{
-	ch->board->rxwinon(ch);
-}
-
-static void txwinon(struct channel *ch)
-{
-	ch->board->txwinon(ch);
-}
-
-static void memoff(struct channel *ch)
-{
-	ch->board->memoff(ch);
-}
-static void assertgwinon(struct channel *ch)
-{
-	ch->board->assertgwinon(ch);
-}
-
-static void assertmemoff(struct channel *ch)
-{
-	ch->board->assertmemoff(ch);
-}
-
-/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */
-static void pcxem_memwinon(struct board_info *b, unsigned int win)
-{
-	outb_p(FEPWIN | win, b->port + 1);
-}
-
-static void pcxem_memwinoff(struct board_info *b, unsigned int win)
-{
-	outb_p(0, b->port + 1);
-}
-
-static void pcxem_globalwinon(struct channel *ch)
-{
-	outb_p(FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxem_rxwinon(struct channel *ch)
-{
-	outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_txwinon(struct channel *ch)
-{
-	outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_memoff(struct channel *ch)
-{
-	outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ----------------- Begin pcxe memory window stuff ------------------ */
-static void pcxe_memwinon(struct board_info *b, unsigned int win)
-{
-	outb_p(FEPWIN | win, b->port + 1);
-}
-
-static void pcxe_memwinoff(struct board_info *b, unsigned int win)
-{
-	outb_p(inb(b->port) & ~FEPMEM, b->port + 1);
-	outb_p(0, b->port + 1);
-}
-
-static void pcxe_globalwinon(struct channel *ch)
-{
-	outb_p(FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxe_rxwinon(struct channel *ch)
-{
-	outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_txwinon(struct channel *ch)
-{
-	outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_memoff(struct channel *ch)
-{
-	outb_p(0, (int)ch->board->port);
-	outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */
-static void pcxi_memwinon(struct board_info *b, unsigned int win)
-{
-	outb_p(inb(b->port) | FEPMEM, b->port);
-}
-
-static void pcxi_memwinoff(struct board_info *b, unsigned int win)
-{
-	outb_p(inb(b->port) & ~FEPMEM, b->port);
-}
-
-static void pcxi_globalwinon(struct channel *ch)
-{
-	outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_rxwinon(struct channel *ch)
-{
-	outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_txwinon(struct channel *ch)
-{
-	outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_memoff(struct channel *ch)
-{
-	outb_p(0, ch->board->port);
-}
-
-static void pcxi_assertgwinon(struct channel *ch)
-{
-	epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off");
-}
-
-static void pcxi_assertmemoff(struct channel *ch)
-{
-	epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on");
-}
-
-/*
- * Not all of the cards need specific memory windowing routines. Some cards
- * (Such as PCI) needs no windowing routines at all. We provide these do
- * nothing routines so that the same code base can be used. The driver will
- * ALWAYS call a windowing routine if it thinks it needs to; regardless of the
- * card. However, dependent on the card the routine may or may not do anything.
- */
-static void dummy_memwinon(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_memwinoff(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_globalwinon(struct channel *ch)
-{
-}
-
-static void dummy_rxwinon(struct channel *ch)
-{
-}
-
-static void dummy_txwinon(struct channel *ch)
-{
-}
-
-static void dummy_memoff(struct channel *ch)
-{
-}
-
-static void dummy_assertgwinon(struct channel *ch)
-{
-}
-
-static void dummy_assertmemoff(struct channel *ch)
-{
-}
-
-static struct channel *verifyChannel(struct tty_struct *tty)
-{
-	/*
-	 * This routine basically provides a sanity check. It insures that the
-	 * channel returned is within the proper range of addresses as well as
-	 * properly initialized. If some bogus info gets passed in
-	 * through tty->driver_data this should catch it.
-	 */
-	if (tty) {
-		struct channel *ch = tty->driver_data;
-		if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) {
-			if (ch->magic == EPCA_MAGIC)
-				return ch;
-		}
-	}
-	return NULL;
-}
-
-static void pc_sched_event(struct channel *ch, int event)
-{
-	/*
-	 * We call this to schedule interrupt processing on some event. The
-	 * kernel sees our request and calls the related routine in OUR driver.
-	 */
-	ch->event |= 1 << event;
-	schedule_work(&ch->tqueue);
-}
-
-static void epca_error(int line, char *msg)
-{
-	printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg);
-}
-
-static void pc_close(struct tty_struct *tty, struct file *filp)
-{
-	struct channel *ch;
-	struct tty_port *port;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch == NULL)
-		return;
-	port = &ch->port;
-
-	if (tty_port_close_start(port, tty, filp) == 0)
-		return;
-
-	pc_flush_buffer(tty);
-	shutdown(ch, tty);
-
-	tty_port_close_end(port, tty);
-	ch->event = 0;	/* FIXME: review ch->event locking */
-	tty_port_tty_set(port, NULL);
-}
-
-static void shutdown(struct channel *ch, struct tty_struct *tty)
-{
-	unsigned long flags;
-	struct board_chan __iomem *bc;
-	struct tty_port *port = &ch->port;
-
-	if (!(port->flags & ASYNC_INITIALIZED))
-		return;
-
-	spin_lock_irqsave(&epca_lock, flags);
-
-	globalwinon(ch);
-	bc = ch->brdchan;
-
-	/*
-	 * In order for an event to be generated on the receipt of data the
-	 * idata flag must be set. Since we are shutting down, this is not
-	 * necessary clear this flag.
-	 */
-	if (bc)
-		writeb(0, &bc->idata);
-
-	/* If we're a modem control device and HUPCL is on, drop RTS & DTR. */
-	if (tty->termios->c_cflag & HUPCL)  {
-		ch->omodem &= ~(ch->m_rts | ch->m_dtr);
-		fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1);
-	}
-	memoff(ch);
-
-	/*
-	 * The channel has officialy been closed. The next time it is opened it
-	 * will have to reinitialized. Set a flag to indicate this.
-	 */
-	/* Prevent future Digi programmed interrupts from coming active */
-	port->flags &= ~ASYNC_INITIALIZED;
-	spin_unlock_irqrestore(&epca_lock, flags);
-}
-
-static void pc_hangup(struct tty_struct *tty)
-{
-	struct channel *ch;
-
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		pc_flush_buffer(tty);
-		tty_ldisc_flush(tty);
-		shutdown(ch, tty);
-
-		ch->event = 0;	/* FIXME: review locking of ch->event */
-		tty_port_hangup(&ch->port);
-	}
-}
-
-static int pc_write(struct tty_struct *tty,
-			const unsigned char *buf, int bytesAvailable)
-{
-	unsigned int head, tail;
-	int dataLen;
-	int size;
-	int amountCopied;
-	struct channel *ch;
-	unsigned long flags;
-	int remain;
-	struct board_chan __iomem *bc;
-
-	/*
-	 * pc_write is primarily called directly by the kernel routine
-	 * tty_write (Though it can also be called by put_char) found in
-	 * tty_io.c. pc_write is passed a line discipline buffer where the data
-	 * to be written out is stored. The line discipline implementation
-	 * itself is done at the kernel level and is not brought into the
-	 * driver.
-	 */
-
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch == NULL)
-		return 0;
-
-	/* Make a pointer to the channel data structure found on the board. */
-	bc   = ch->brdchan;
-	size = ch->txbufsize;
-	amountCopied = 0;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	globalwinon(ch);
-
-	head = readw(&bc->tin) & (size - 1);
-	tail = readw(&bc->tout);
-
-	if (tail != readw(&bc->tout))
-		tail = readw(&bc->tout);
-	tail &= (size - 1);
-
-	if (head >= tail) {
-		/* head has not wrapped */
-		/*
-		 * remain (much like dataLen above) represents the total amount
-		 * of space available on the card for data. Here dataLen
-		 * represents the space existing between the head pointer and
-		 * the end of buffer. This is important because a memcpy cannot
-		 * be told to automatically wrap around when it hits the buffer
-		 * end.
-		 */
-		dataLen = size - head;
-		remain = size - (head - tail) - 1;
-	} else {
-		/* head has wrapped around */
-		remain = tail - head - 1;
-		dataLen = remain;
-	}
-	/*
-	 * Check the space on the card. If we have more data than space; reduce
-	 * the amount of data to fit the space.
-	 */
-	bytesAvailable = min(remain, bytesAvailable);
-	txwinon(ch);
-	while (bytesAvailable > 0) {
-		/* there is data to copy onto card */
-
-		/*
-		 * If head is not wrapped, the below will make sure the first
-		 * data copy fills to the end of card buffer.
-		 */
-		dataLen = min(bytesAvailable, dataLen);
-		memcpy_toio(ch->txptr + head, buf, dataLen);
-		buf += dataLen;
-		head += dataLen;
-		amountCopied += dataLen;
-		bytesAvailable -= dataLen;
-
-		if (head >= size) {
-			head = 0;
-			dataLen = tail;
-		}
-	}
-	ch->statusflags |= TXBUSY;
-	globalwinon(ch);
-	writew(head, &bc->tin);
-
-	if ((ch->statusflags & LOWWAIT) == 0)  {
-		ch->statusflags |= LOWWAIT;
-		writeb(1, &bc->ilow);
-	}
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-	return amountCopied;
-}
-
-static int pc_write_room(struct tty_struct *tty)
-{
-	int remain = 0;
-	struct channel *ch;
-	unsigned long flags;
-	unsigned int head, tail;
-	struct board_chan __iomem *bc;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		spin_lock_irqsave(&epca_lock, flags);
-		globalwinon(ch);
-
-		bc   = ch->brdchan;
-		head = readw(&bc->tin) & (ch->txbufsize - 1);
-		tail = readw(&bc->tout);
-
-		if (tail != readw(&bc->tout))
-			tail = readw(&bc->tout);
-		/* Wrap tail if necessary */
-		tail &= (ch->txbufsize - 1);
-		remain = tail - head - 1;
-		if (remain < 0)
-			remain += ch->txbufsize;
-
-		if (remain && (ch->statusflags & LOWWAIT) == 0) {
-			ch->statusflags |= LOWWAIT;
-			writeb(1, &bc->ilow);
-		}
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-	/* Return how much room is left on card */
-	return remain;
-}
-
-static int pc_chars_in_buffer(struct tty_struct *tty)
-{
-	int chars;
-	unsigned int ctail, head, tail;
-	int remain;
-	unsigned long flags;
-	struct channel *ch;
-	struct board_chan __iomem *bc;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch == NULL)
-		return 0;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	globalwinon(ch);
-
-	bc = ch->brdchan;
-	tail = readw(&bc->tout);
-	head = readw(&bc->tin);
-	ctail = readw(&ch->mailbox->cout);
-
-	if (tail == head && readw(&ch->mailbox->cin) == ctail &&
-						readb(&bc->tbusy) == 0)
-		chars = 0;
-	else  { /* Begin if some space on the card has been used */
-		head = readw(&bc->tin) & (ch->txbufsize - 1);
-		tail &= (ch->txbufsize - 1);
-		/*
-		 * The logic here is basically opposite of the above
-		 * pc_write_room here we are finding the amount of bytes in the
-		 * buffer filled. Not the amount of bytes empty.
-		 */
-		remain = tail - head - 1;
-		if (remain < 0)
-			remain += ch->txbufsize;
-		chars = (int)(ch->txbufsize - remain);
-		/*
-		 * Make it possible to wakeup anything waiting for output in
-		 * tty_ioctl.c, etc.
-		 *
-		 * If not already set. Setup an event to indicate when the
-		 * transmit buffer empties.
-		 */
-		if (!(ch->statusflags & EMPTYWAIT))
-			setup_empty_event(tty, ch);
-	} /* End if some space on the card has been used */
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-	/* Return number of characters residing on card. */
-	return chars;
-}
-
-static void pc_flush_buffer(struct tty_struct *tty)
-{
-	unsigned int tail;
-	unsigned long flags;
-	struct channel *ch;
-	struct board_chan __iomem *bc;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch == NULL)
-		return;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	globalwinon(ch);
-	bc   = ch->brdchan;
-	tail = readw(&bc->tout);
-	/* Have FEP move tout pointer; effectively flushing transmit buffer */
-	fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0);
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-	tty_wakeup(tty);
-}
-
-static void pc_flush_chars(struct tty_struct *tty)
-{
-	struct channel *ch;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		unsigned long flags;
-		spin_lock_irqsave(&epca_lock, flags);
-		/*
-		 * If not already set and the transmitter is busy setup an
-		 * event to indicate when the transmit empties.
-		 */
-		if ((ch->statusflags & TXBUSY) &&
-				!(ch->statusflags & EMPTYWAIT))
-			setup_empty_event(tty, ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-}
-
-static int epca_carrier_raised(struct tty_port *port)
-{
-	struct channel *ch = container_of(port, struct channel, port);
-	if (ch->imodem & ch->dcd)
-		return 1;
-	return 0;
-}
-
-static void epca_dtr_rts(struct tty_port *port, int onoff)
-{
-}
-
-static int pc_open(struct tty_struct *tty, struct file *filp)
-{
-	struct channel *ch;
-	struct tty_port *port;
-	unsigned long flags;
-	int line, retval, boardnum;
-	struct board_chan __iomem *bc;
-	unsigned int head;
-
-	line = tty->index;
-	if (line < 0 || line >= nbdevs)
-		return -ENODEV;
-
-	ch = &digi_channels[line];
-	port = &ch->port;
-	boardnum = ch->boardnum;
-
-	/* Check status of board configured in system.  */
-
-	/*
-	 * I check to see if the epca_setup routine detected a user error. It
-	 * might be better to put this in pc_init, but for the moment it goes
-	 * here.
-	 */
-	if (invalid_lilo_config) {
-		if (setup_error_code & INVALID_BOARD_TYPE)
-			printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n");
-		if (setup_error_code & INVALID_NUM_PORTS)
-			printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n");
-		if (setup_error_code & INVALID_MEM_BASE)
-			printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n");
-		if (setup_error_code & INVALID_PORT_BASE)
-			printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n");
-		if (setup_error_code & INVALID_BOARD_STATUS)
-			printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n");
-		if (setup_error_code & INVALID_ALTPIN)
-			printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n");
-		tty->driver_data = NULL;   /* Mark this device as 'down' */
-		return -ENODEV;
-	}
-	if (boardnum >= num_cards || boards[boardnum].status == DISABLED)  {
-		tty->driver_data = NULL;   /* Mark this device as 'down' */
-		return(-ENODEV);
-	}
-
-	bc = ch->brdchan;
-	if (bc == NULL) {
-		tty->driver_data = NULL;
-		return -ENODEV;
-	}
-
-	spin_lock_irqsave(&port->lock, flags);
-	/*
-	 * Every time a channel is opened, increment a counter. This is
-	 * necessary because we do not wish to flush and shutdown the channel
-	 * until the last app holding the channel open, closes it.
-	 */
-	port->count++;
-	/*
-	 * Set a kernel structures pointer to our local channel structure. This
-	 * way we can get to it when passed only a tty struct.
-	 */
-	tty->driver_data = ch;
-	port->tty = tty;
-	/*
-	 * If this is the first time the channel has been opened, initialize
-	 * the tty->termios struct otherwise let pc_close handle it.
-	 */
-	spin_lock(&epca_lock);
-	globalwinon(ch);
-	ch->statusflags = 0;
-
-	/* Save boards current modem status */
-	ch->imodem = readb(&bc->mstat);
-
-	/*
-	 * Set receive head and tail ptrs to each other. This indicates no data
-	 * available to read.
-	 */
-	head = readw(&bc->rin);
-	writew(head, &bc->rout);
-
-	/* Set the channels associated tty structure */
-
-	/*
-	 * The below routine generally sets up parity, baud, flow control
-	 * issues, etc.... It effect both control flags and input flags.
-	 */
-	epcaparam(tty, ch);
-	memoff(ch);
-	spin_unlock(&epca_lock);
-	port->flags |= ASYNC_INITIALIZED;
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	retval = tty_port_block_til_ready(port, tty, filp);
-	if (retval)
-		return retval;
-	/*
-	 * Set this again in case a hangup set it to zero while this open() was
-	 * waiting for the line...
-	 */
-	spin_lock_irqsave(&port->lock, flags);
-	port->tty = tty;
-	spin_lock(&epca_lock);
-	globalwinon(ch);
-	/* Enable Digi Data events */
-	writeb(1, &bc->idata);
-	memoff(ch);
-	spin_unlock(&epca_lock);
-	spin_unlock_irqrestore(&port->lock, flags);
-	return 0;
-}
-
-static int __init epca_module_init(void)
-{
-	return pc_init();
-}
-module_init(epca_module_init);
-
-static struct pci_driver epca_driver;
-
-static void __exit epca_module_exit(void)
-{
-	int               count, crd;
-	struct board_info *bd;
-	struct channel    *ch;
-
-	del_timer_sync(&epca_timer);
-
-	if (tty_unregister_driver(pc_driver) ||
-				tty_unregister_driver(pc_info)) {
-		printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
-		return;
-	}
-	put_tty_driver(pc_driver);
-	put_tty_driver(pc_info);
-
-	for (crd = 0; crd < num_cards; crd++) {
-		bd = &boards[crd];
-		if (!bd) { /* sanity check */
-			printk(KERN_ERR "<Error> - Digi : cleanup_module failed\n");
-			return;
-		}
-		ch = card_ptr[crd];
-		for (count = 0; count < bd->numports; count++, ch++) {
-			struct tty_struct *tty = tty_port_tty_get(&ch->port);
-			if (tty) {
-				tty_hangup(tty);
-				tty_kref_put(tty);
-			}
-		}
-	}
-	pci_unregister_driver(&epca_driver);
-}
-module_exit(epca_module_exit);
-
-static const struct tty_operations pc_ops = {
-	.open = pc_open,
-	.close = pc_close,
-	.write = pc_write,
-	.write_room = pc_write_room,
-	.flush_buffer = pc_flush_buffer,
-	.chars_in_buffer = pc_chars_in_buffer,
-	.flush_chars = pc_flush_chars,
-	.ioctl = pc_ioctl,
-	.set_termios = pc_set_termios,
-	.stop = pc_stop,
-	.start = pc_start,
-	.throttle = pc_throttle,
-	.unthrottle = pc_unthrottle,
-	.hangup = pc_hangup,
-	.break_ctl = pc_send_break
-};
-
-static const struct tty_port_operations epca_port_ops = {
-	.carrier_raised = epca_carrier_raised,
-	.dtr_rts = epca_dtr_rts,
-};
-
-static int info_open(struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-static const struct tty_operations info_ops = {
-	.open = info_open,
-	.ioctl = info_ioctl,
-};
-
-static int __init pc_init(void)
-{
-	int crd;
-	struct board_info *bd;
-	unsigned char board_id = 0;
-	int err = -ENOMEM;
-
-	int pci_boards_found, pci_count;
-
-	pci_count = 0;
-
-	pc_driver = alloc_tty_driver(MAX_ALLOC);
-	if (!pc_driver)
-		goto out1;
-
-	pc_info = alloc_tty_driver(MAX_ALLOC);
-	if (!pc_info)
-		goto out2;
-
-	/*
-	 * If epca_setup has not been ran by LILO set num_cards to defaults;
-	 * copy board structure defined by digiConfig into drivers board
-	 * structure. Note : If LILO has ran epca_setup then epca_setup will
-	 * handle defining num_cards as well as copying the data into the board
-	 * structure.
-	 */
-	if (!liloconfig) {
-		/* driver has been configured via. epcaconfig */
-		nbdevs = NBDEVS;
-		num_cards = NUMCARDS;
-		memcpy(&boards, &static_boards,
-		       sizeof(struct board_info) * NUMCARDS);
-	}
-
-	/*
-	 * Note : If lilo was used to configure the driver and the ignore
-	 * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
-	 * will equal 0 at this point. This is okay; PCI cards will still be
-	 * picked up if detected.
-	 */
-
-	/*
-	 * Set up interrupt, we will worry about memory allocation in
-	 * post_fep_init.
-	 */
-	printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION);
-
-	/*
-	 * NOTE : This code assumes that the number of ports found in the
-	 * boards array is correct. This could be wrong if the card in question
-	 * is PCI (And therefore has no ports entry in the boards structure.)
-	 * The rest of the information will be valid for PCI because the
-	 * beginning of pc_init scans for PCI and determines i/o and base
-	 * memory addresses. I am not sure if it is possible to read the number
-	 * of ports supported by the card prior to it being booted (Since that
-	 * is the state it is in when pc_init is run). Because it is not
-	 * possible to query the number of supported ports until after the card
-	 * has booted; we are required to calculate the card_ptrs as the card
-	 * is initialized (Inside post_fep_init). The negative thing about this
-	 * approach is that digiDload's call to GET_INFO will have a bad port
-	 * value. (Since this is called prior to post_fep_init.)
-	 */
-	pci_boards_found = 0;
-	if (num_cards < MAXBOARDS)
-		pci_boards_found += init_PCI();
-	num_cards += pci_boards_found;
-
-	pc_driver->owner = THIS_MODULE;
-	pc_driver->name = "ttyD";
-	pc_driver->major = DIGI_MAJOR;
-	pc_driver->minor_start = 0;
-	pc_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	pc_driver->subtype = SERIAL_TYPE_NORMAL;
-	pc_driver->init_termios = tty_std_termios;
-	pc_driver->init_termios.c_iflag = 0;
-	pc_driver->init_termios.c_oflag = 0;
-	pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
-	pc_driver->init_termios.c_lflag = 0;
-	pc_driver->init_termios.c_ispeed = 9600;
-	pc_driver->init_termios.c_ospeed = 9600;
-	pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
-	tty_set_operations(pc_driver, &pc_ops);
-
-	pc_info->owner = THIS_MODULE;
-	pc_info->name = "digi_ctl";
-	pc_info->major = DIGIINFOMAJOR;
-	pc_info->minor_start = 0;
-	pc_info->type = TTY_DRIVER_TYPE_SERIAL;
-	pc_info->subtype = SERIAL_TYPE_INFO;
-	pc_info->init_termios = tty_std_termios;
-	pc_info->init_termios.c_iflag = 0;
-	pc_info->init_termios.c_oflag = 0;
-	pc_info->init_termios.c_lflag = 0;
-	pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
-	pc_info->init_termios.c_ispeed = 9600;
-	pc_info->init_termios.c_ospeed = 9600;
-	pc_info->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(pc_info, &info_ops);
-
-
-	for (crd = 0; crd < num_cards; crd++) {
-		/*
-		 * This is where the appropriate memory handlers for the
-		 * hardware is set. Everything at runtime blindly jumps through
-		 * these vectors.
-		 */
-
-		/* defined in epcaconfig.h */
-		bd = &boards[crd];
-
-		switch (bd->type) {
-		case PCXEM:
-		case EISAXEM:
-			bd->memwinon     = pcxem_memwinon;
-			bd->memwinoff    = pcxem_memwinoff;
-			bd->globalwinon  = pcxem_globalwinon;
-			bd->txwinon      = pcxem_txwinon;
-			bd->rxwinon      = pcxem_rxwinon;
-			bd->memoff       = pcxem_memoff;
-			bd->assertgwinon = dummy_assertgwinon;
-			bd->assertmemoff = dummy_assertmemoff;
-			break;
-
-		case PCIXEM:
-		case PCIXRJ:
-		case PCIXR:
-			bd->memwinon     = dummy_memwinon;
-			bd->memwinoff    = dummy_memwinoff;
-			bd->globalwinon  = dummy_globalwinon;
-			bd->txwinon      = dummy_txwinon;
-			bd->rxwinon      = dummy_rxwinon;
-			bd->memoff       = dummy_memoff;
-			bd->assertgwinon = dummy_assertgwinon;
-			bd->assertmemoff = dummy_assertmemoff;
-			break;
-
-		case PCXE:
-		case PCXEVE:
-			bd->memwinon     = pcxe_memwinon;
-			bd->memwinoff    = pcxe_memwinoff;
-			bd->globalwinon  = pcxe_globalwinon;
-			bd->txwinon      = pcxe_txwinon;
-			bd->rxwinon      = pcxe_rxwinon;
-			bd->memoff       = pcxe_memoff;
-			bd->assertgwinon = dummy_assertgwinon;
-			bd->assertmemoff = dummy_assertmemoff;
-			break;
-
-		case PCXI:
-		case PC64XE:
-			bd->memwinon     = pcxi_memwinon;
-			bd->memwinoff    = pcxi_memwinoff;
-			bd->globalwinon  = pcxi_globalwinon;
-			bd->txwinon      = pcxi_txwinon;
-			bd->rxwinon      = pcxi_rxwinon;
-			bd->memoff       = pcxi_memoff;
-			bd->assertgwinon = pcxi_assertgwinon;
-			bd->assertmemoff = pcxi_assertmemoff;
-			break;
-
-		default:
-			break;
-		}
-
-		/*
-		 * Some cards need a memory segment to be defined for use in
-		 * transmit and receive windowing operations. These boards are
-		 * listed in the below switch. In the case of the XI the amount
-		 * of memory on the board is variable so the memory_seg is also
-		 * variable. This code determines what they segment should be.
-		 */
-		switch (bd->type) {
-		case PCXE:
-		case PCXEVE:
-		case PC64XE:
-			bd->memory_seg = 0xf000;
-			break;
-
-		case PCXI:
-			board_id = inb((int)bd->port);
-			if ((board_id & 0x1) == 0x1) {
-				/* it's an XI card */
-				/* Is it a 64K board */
-				if ((board_id & 0x30) == 0)
-					bd->memory_seg = 0xf000;
-
-				/* Is it a 128K board */
-				if ((board_id & 0x30) == 0x10)
-					bd->memory_seg = 0xe000;
-
-				/* Is is a 256K board */
-				if ((board_id & 0x30) == 0x20)
-					bd->memory_seg = 0xc000;
-
-				/* Is it a 512K board */
-				if ((board_id & 0x30) == 0x30)
-					bd->memory_seg = 0x8000;
-			} else
-				printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port);
-			break;
-		}
-	}
-
-	err = tty_register_driver(pc_driver);
-	if (err) {
-		printk(KERN_ERR "Couldn't register Digi PC/ driver");
-		goto out3;
-	}
-
-	err = tty_register_driver(pc_info);
-	if (err) {
-		printk(KERN_ERR "Couldn't register Digi PC/ info ");
-		goto out4;
-	}
-
-	/* Start up the poller to check for events on all enabled boards */
-	init_timer(&epca_timer);
-	epca_timer.function = epcapoll;
-	mod_timer(&epca_timer, jiffies + HZ/25);
-	return 0;
-
-out4:
-	tty_unregister_driver(pc_driver);
-out3:
-	put_tty_driver(pc_info);
-out2:
-	put_tty_driver(pc_driver);
-out1:
-	return err;
-}
-
-static void post_fep_init(unsigned int crd)
-{
-	int i;
-	void __iomem *memaddr;
-	struct global_data __iomem *gd;
-	struct board_info *bd;
-	struct board_chan __iomem *bc;
-	struct channel *ch;
-	int shrinkmem = 0, lowwater;
-
-	/*
-	 * This call is made by the user via. the ioctl call DIGI_INIT. It is
-	 * responsible for setting up all the card specific stuff.
-	 */
-	bd = &boards[crd];
-
-	/*
-	 * If this is a PCI board, get the port info. Remember PCI cards do not
-	 * have entries into the epcaconfig.h file, so we can't get the number
-	 * of ports from it. Unfortunetly, this means that anyone doing a
-	 * DIGI_GETINFO before the board has booted will get an invalid number
-	 * of ports returned (It should return 0). Calls to DIGI_GETINFO after
-	 * DIGI_INIT has been called will return the proper values.
-	 */
-	if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */
-		/*
-		 * Below we use XEMPORTS as a memory offset regardless of which
-		 * PCI card it is. This is because all of the supported PCI
-		 * cards have the same memory offset for the channel data. This
-		 * will have to be changed if we ever develop a PCI/XE card.
-		 * NOTE : The FEP manual states that the port offset is 0xC22
-		 * as opposed to 0xC02. This is only true for PC/XE, and PC/XI
-		 * cards; not for the XEM, or CX series. On the PCI cards the
-		 * number of ports is determined by reading a ID PROM located
-		 * in the box attached to the card. The card can then determine
-		 * the index the id to determine the number of ports available.
-		 * (FYI - The id should be located at 0x1ac (And may use up to
-		 * 4 bytes if the box in question is a XEM or CX)).
-		 */
-		/* PCI cards are already remapped at this point ISA are not */
-		bd->numports = readw(bd->re_map_membase + XEMPORTS);
-		epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports");
-		nbdevs += (bd->numports);
-	} else {
-		/* Fix up the mappings for ISA/EISA etc */
-		/* FIXME: 64K - can we be smarter ? */
-		bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000);
-	}
-
-	if (crd != 0)
-		card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports;
-	else
-		card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */
-
-	ch = card_ptr[crd];
-	epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range");
-
-	memaddr = bd->re_map_membase;
-
-	/*
-	 * The below assignment will set bc to point at the BEGINING of the
-	 * cards channel structures. For 1 card there will be between 8 and 64
-	 * of these structures.
-	 */
-	bc = memaddr + CHANSTRUCT;
-
-	/*
-	 * The below assignment will set gd to point at the BEGINING of global
-	 * memory address 0xc00. The first data in that global memory actually
-	 * starts at address 0xc1a. The command in pointer begins at 0xd10.
-	 */
-	gd = memaddr + GLOBAL;
-
-	/*
-	 * XEPORTS (address 0xc22) points at the number of channels the card
-	 * supports. (For 64XE, XI, XEM, and XR use 0xc02)
-	 */
-	if ((bd->type == PCXEVE || bd->type == PCXE) &&
-					(readw(memaddr + XEPORTS) < 3))
-		shrinkmem = 1;
-	if (bd->type < PCIXEM)
-		if (!request_region((int)bd->port, 4, board_desc[bd->type]))
-			return;
-	memwinon(bd, 0);
-
-	/*
-	 * Remember ch is the main drivers channels structure, while bc is the
-	 * cards channel structure.
-	 */
-	for (i = 0; i < bd->numports; i++, ch++, bc++) {
-		unsigned long flags;
-		u16 tseg, rseg;
-
-		tty_port_init(&ch->port);
-		ch->port.ops = &epca_port_ops;
-		ch->brdchan = bc;
-		ch->mailbox = gd;
-		INIT_WORK(&ch->tqueue, do_softint);
-		ch->board = &boards[crd];
-
-		spin_lock_irqsave(&epca_lock, flags);
-		switch (bd->type) {
-		/*
-		 * Since some of the boards use different bitmaps for
-		 * their control signals we cannot hard code these
-		 * values and retain portability. We virtualize this
-		 * data here.
-		 */
-		case EISAXEM:
-		case PCXEM:
-		case PCIXEM:
-		case PCIXRJ:
-		case PCIXR:
-			ch->m_rts = 0x02;
-			ch->m_dcd = 0x80;
-			ch->m_dsr = 0x20;
-			ch->m_cts = 0x10;
-			ch->m_ri  = 0x40;
-			ch->m_dtr = 0x01;
-			break;
-
-		case PCXE:
-		case PCXEVE:
-		case PCXI:
-		case PC64XE:
-			ch->m_rts = 0x02;
-			ch->m_dcd = 0x08;
-			ch->m_dsr = 0x10;
-			ch->m_cts = 0x20;
-			ch->m_ri  = 0x40;
-			ch->m_dtr = 0x80;
-			break;
-		}
-
-		if (boards[crd].altpin) {
-			ch->dsr = ch->m_dcd;
-			ch->dcd = ch->m_dsr;
-			ch->digiext.digi_flags |= DIGI_ALTPIN;
-		} else {
-			ch->dcd = ch->m_dcd;
-			ch->dsr = ch->m_dsr;
-		}
-
-		ch->boardnum   = crd;
-		ch->channelnum = i;
-		ch->magic      = EPCA_MAGIC;
-		tty_port_tty_set(&ch->port, NULL);
-
-		if (shrinkmem) {
-			fepcmd(ch, SETBUFFER, 32, 0, 0, 0);
-			shrinkmem = 0;
-		}
-
-		tseg = readw(&bc->tseg);
-		rseg = readw(&bc->rseg);
-
-		switch (bd->type) {
-		case PCIXEM:
-		case PCIXRJ:
-		case PCIXR:
-			/* Cover all the 2MEG cards */
-			ch->txptr = memaddr + ((tseg << 4) & 0x1fffff);
-			ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff);
-			ch->txwin = FEPWIN | (tseg >> 11);
-			ch->rxwin = FEPWIN | (rseg >> 11);
-			break;
-
-		case PCXEM:
-		case EISAXEM:
-			/* Cover all the 32K windowed cards */
-			/* Mask equal to window size - 1 */
-			ch->txptr = memaddr + ((tseg << 4) & 0x7fff);
-			ch->rxptr = memaddr + ((rseg << 4) & 0x7fff);
-			ch->txwin = FEPWIN | (tseg >> 11);
-			ch->rxwin = FEPWIN | (rseg >> 11);
-			break;
-
-		case PCXEVE:
-		case PCXE:
-			ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4)
-								& 0x1fff);
-			ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
-			ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4)
-								& 0x1fff);
-			ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9);
-			break;
-
-		case PCXI:
-		case PC64XE:
-			ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4);
-			ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4);
-			ch->txwin = ch->rxwin = 0;
-			break;
-		}
-
-		ch->txbufhead = 0;
-		ch->txbufsize = readw(&bc->tmax) + 1;
-
-		ch->rxbufhead = 0;
-		ch->rxbufsize = readw(&bc->rmax) + 1;
-
-		lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2);
-
-		/* Set transmitter low water mark */
-		fepcmd(ch, STXLWATER, lowwater, 0, 10, 0);
-
-		/* Set receiver low water mark */
-		fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0);
-
-		/* Set receiver high water mark */
-		fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0);
-
-		writew(100, &bc->edelay);
-		writeb(1, &bc->idata);
-
-		ch->startc  = readb(&bc->startc);
-		ch->stopc   = readb(&bc->stopc);
-		ch->startca = readb(&bc->startca);
-		ch->stopca  = readb(&bc->stopca);
-
-		ch->fepcflag = 0;
-		ch->fepiflag = 0;
-		ch->fepoflag = 0;
-		ch->fepstartc = 0;
-		ch->fepstopc = 0;
-		ch->fepstartca = 0;
-		ch->fepstopca = 0;
-
-		ch->port.close_delay = 50;
-
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-
-	printk(KERN_INFO
-	"Digi PC/Xx Driver V%s:  %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
-				VERSION, board_desc[bd->type], (long)bd->port,
-					(long)bd->membase, bd->numports);
-	memwinoff(bd, 0);
-}
-
-static void epcapoll(unsigned long ignored)
-{
-	unsigned long flags;
-	int crd;
-	unsigned int head, tail;
-	struct channel *ch;
-	struct board_info *bd;
-
-	/*
-	 * This routine is called upon every timer interrupt. Even though the
-	 * Digi series cards are capable of generating interrupts this method
-	 * of non-looping polling is more efficient. This routine checks for
-	 * card generated events (Such as receive data, are transmit buffer
-	 * empty) and acts on those events.
-	 */
-	for (crd = 0; crd < num_cards; crd++) {
-		bd = &boards[crd];
-		ch = card_ptr[crd];
-
-		if ((bd->status == DISABLED) || digi_poller_inhibited)
-			continue;
-
-		/*
-		 * assertmemoff is not needed here; indeed it is an empty
-		 * subroutine. It is being kept because future boards may need
-		 * this as well as some legacy boards.
-		 */
-		spin_lock_irqsave(&epca_lock, flags);
-
-		assertmemoff(ch);
-
-		globalwinon(ch);
-
-		/*
-		 * In this case head and tail actually refer to the event queue
-		 * not the transmit or receive queue.
-		 */
-		head = readw(&ch->mailbox->ein);
-		tail = readw(&ch->mailbox->eout);
-
-		/* If head isn't equal to tail we have an event */
-		if (head != tail)
-			doevent(crd);
-		memoff(ch);
-
-		spin_unlock_irqrestore(&epca_lock, flags);
-	} /* End for each card */
-	mod_timer(&epca_timer, jiffies + (HZ / 25));
-}
-
-static void doevent(int crd)
-{
-	void __iomem *eventbuf;
-	struct channel *ch, *chan0;
-	static struct tty_struct *tty;
-	struct board_info *bd;
-	struct board_chan __iomem *bc;
-	unsigned int tail, head;
-	int event, channel;
-	int mstat, lstat;
-
-	/*
-	 * This subroutine is called by epcapoll when an event is detected
-	 * in the event queue. This routine responds to those events.
-	 */
-	bd = &boards[crd];
-
-	chan0 = card_ptr[crd];
-	epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
-	assertgwinon(chan0);
-	while ((tail = readw(&chan0->mailbox->eout)) !=
-			(head = readw(&chan0->mailbox->ein))) {
-		/* Begin while something in event queue */
-		assertgwinon(chan0);
-		eventbuf = bd->re_map_membase + tail + ISTART;
-		/* Get the channel the event occurred on */
-		channel = readb(eventbuf);
-		/* Get the actual event code that occurred */
-		event = readb(eventbuf + 1);
-		/*
-		 * The two assignments below get the current modem status
-		 * (mstat) and the previous modem status (lstat). These are
-		 * useful becuase an event could signal a change in modem
-		 * signals itself.
-		 */
-		mstat = readb(eventbuf + 2);
-		lstat = readb(eventbuf + 3);
-
-		ch = chan0 + channel;
-		if ((unsigned)channel >= bd->numports || !ch)  {
-			if (channel >= bd->numports)
-				ch = chan0;
-			bc = ch->brdchan;
-			goto next;
-		}
-
-		bc = ch->brdchan;
-		if (bc == NULL)
-			goto next;
-
-		tty = tty_port_tty_get(&ch->port);
-		if (event & DATA_IND)  { /* Begin DATA_IND */
-			receive_data(ch, tty);
-			assertgwinon(ch);
-		} /* End DATA_IND */
-		/* else *//* Fix for DCD transition missed bug */
-		if (event & MODEMCHG_IND) {
-			/* A modem signal change has been indicated */
-			ch->imodem = mstat;
-			if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) {
-				/* We are now receiving dcd */
-				if (mstat & ch->dcd)
-					wake_up_interruptible(&ch->port.open_wait);
-				else	/* No dcd; hangup */
-					pc_sched_event(ch, EPCA_EVENT_HANGUP);
-			}
-		}
-		if (tty) {
-			if (event & BREAK_IND) {
-				/* A break has been indicated */
-				tty_insert_flip_char(tty, 0, TTY_BREAK);
-				tty_schedule_flip(tty);
-			} else if (event & LOWTX_IND)  {
-				if (ch->statusflags & LOWWAIT) {
-					ch->statusflags &= ~LOWWAIT;
-					tty_wakeup(tty);
-				}
-			} else if (event & EMPTYTX_IND) {
-				/* This event is generated by
-				   setup_empty_event */
-				ch->statusflags &= ~TXBUSY;
-				if (ch->statusflags & EMPTYWAIT) {
-					ch->statusflags &= ~EMPTYWAIT;
-					tty_wakeup(tty);
-				}
-			}
-			tty_kref_put(tty);
-		}
-next:
-		globalwinon(ch);
-		BUG_ON(!bc);
-		writew(1, &bc->idata);
-		writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout);
-		globalwinon(chan0);
-	} /* End while something in event queue */
-}
-
-static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
-					int byte2, int ncmds, int bytecmd)
-{
-	unchar __iomem *memaddr;
-	unsigned int head, cmdTail, cmdStart, cmdMax;
-	long count;
-	int n;
-
-	/* This is the routine in which commands may be passed to the card. */
-
-	if (ch->board->status == DISABLED)
-		return;
-	assertgwinon(ch);
-	/* Remember head (As well as max) is just an offset not a base addr */
-	head = readw(&ch->mailbox->cin);
-	/* cmdStart is a base address */
-	cmdStart = readw(&ch->mailbox->cstart);
-	/*
-	 * We do the addition below because we do not want a max pointer
-	 * relative to cmdStart. We want a max pointer that points at the
-	 * physical end of the command queue.
-	 */
-	cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax));
-	memaddr = ch->board->re_map_membase;
-
-	if (head >= (cmdMax - cmdStart) || (head & 03))  {
-		printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n",
-						__LINE__,  cmd, head);
-		printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n",
-						__LINE__,  cmdMax, cmdStart);
-		return;
-	}
-	if (bytecmd)  {
-		writeb(cmd, memaddr + head + cmdStart + 0);
-		writeb(ch->channelnum,  memaddr + head + cmdStart + 1);
-		/* Below word_or_byte is bits to set */
-		writeb(word_or_byte,  memaddr + head + cmdStart + 2);
-		/* Below byte2 is bits to reset */
-		writeb(byte2, memaddr + head + cmdStart + 3);
-	}  else {
-		writeb(cmd, memaddr + head + cmdStart + 0);
-		writeb(ch->channelnum,  memaddr + head + cmdStart + 1);
-		writeb(word_or_byte,  memaddr + head + cmdStart + 2);
-	}
-	head = (head + 4) & (cmdMax - cmdStart - 4);
-	writew(head, &ch->mailbox->cin);
-	count = FEPTIMEOUT;
-
-	for (;;) {
-		count--;
-		if (count == 0)  {
-			printk(KERN_ERR "<Error> - Fep not responding in fepcmd()\n");
-			return;
-		}
-		head = readw(&ch->mailbox->cin);
-		cmdTail = readw(&ch->mailbox->cout);
-		n = (head - cmdTail) & (cmdMax - cmdStart - 4);
-		/*
-		 * Basically this will break when the FEP acknowledges the
-		 * command by incrementing cmdTail (Making it equal to head).
-		 */
-		if (n <= ncmds * (sizeof(short) * 4))
-			break;
-	}
-}
-
-/*
- * Digi products use fields in their channels structures that are very similar
- * to the c_cflag and c_iflag fields typically found in UNIX termios
- * structures. The below three routines allow mappings between these hardware
- * "flags" and their respective Linux flags.
- */
-static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
-{
-	unsigned res = 0;
-
-	if (cflag & CRTSCTS) {
-		ch->digiext.digi_flags |= (RTSPACE | CTSPACE);
-		res |= ((ch->m_cts) | (ch->m_rts));
-	}
-
-	if (ch->digiext.digi_flags & RTSPACE)
-		res |= ch->m_rts;
-
-	if (ch->digiext.digi_flags & DTRPACE)
-		res |= ch->m_dtr;
-
-	if (ch->digiext.digi_flags & CTSPACE)
-		res |= ch->m_cts;
-
-	if (ch->digiext.digi_flags & DSRPACE)
-		res |= ch->dsr;
-
-	if (ch->digiext.digi_flags & DCDPACE)
-		res |= ch->dcd;
-
-	if (res & (ch->m_rts))
-		ch->digiext.digi_flags |= RTSPACE;
-
-	if (res & (ch->m_cts))
-		ch->digiext.digi_flags |= CTSPACE;
-
-	return res;
-}
-
-static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
-{
-	unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
-					INPCK | ISTRIP | IXON | IXANY | IXOFF);
-	if (ch->digiext.digi_flags & DIGI_AIXON)
-		res |= IAIXON;
-	return res;
-}
-
-static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
-{
-	unsigned res = 0;
-	if (cflag & CBAUDEX) {
-		ch->digiext.digi_flags |= DIGI_FAST;
-		/*
-		 * HUPCL bit is used by FEP to indicate fast baud table is to
-		 * be used.
-		 */
-		res |= FEP_HUPCL;
-	} else
-		ch->digiext.digi_flags &= ~DIGI_FAST;
-	/*
-	 * CBAUD has bit position 0x1000 set these days to indicate Linux
-	 * baud rate remap. Digi hardware can't handle the bit assignment.
-	 * (We use a different bit assignment for high speed.). Clear this
-	 * bit out.
-	 */
-	res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
-	/*
-	 * This gets a little confusing. The Digi cards have their own
-	 * representation of c_cflags controlling baud rate. For the most part
-	 * this is identical to the Linux implementation. However; Digi
-	 * supports one rate (76800) that Linux doesn't. This means that the
-	 * c_cflag entry that would normally mean 76800 for Digi actually means
-	 * 115200 under Linux. Without the below mapping, a stty 115200 would
-	 * only drive the board at 76800. Since the rate 230400 is also found
-	 * after 76800, the same problem afflicts us when we choose a rate of
-	 * 230400. Without the below modificiation stty 230400 would actually
-	 * give us 115200.
-	 *
-	 * There are two additional differences. The Linux value for CLOCAL
-	 * (0x800; 0004000) has no meaning to the Digi hardware. Also in later
-	 * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000)
-	 * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be
-	 * checked for a screened out prior to termios2digi_c returning. Since
-	 * CLOCAL isn't used by the board this can be ignored as long as the
-	 * returned value is used only by Digi hardware.
-	 */
-	if (cflag & CBAUDEX) {
-		/*
-		 * The below code is trying to guarantee that only baud rates
-		 * 115200 and 230400 are remapped. We use exclusive or because
-		 * the various baud rates share common bit positions and
-		 * therefore can't be tested for easily.
-		 */
-		if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) ||
-		    (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX))))
-			res += 1;
-	}
-	return res;
-}
-
-/* Caller must hold the locks */
-static void epcaparam(struct tty_struct *tty, struct channel *ch)
-{
-	unsigned int cmdHead;
-	struct ktermios *ts;
-	struct board_chan __iomem *bc;
-	unsigned mval, hflow, cflag, iflag;
-
-	bc = ch->brdchan;
-	epcaassert(bc != NULL, "bc out of range");
-
-	assertgwinon(ch);
-	ts = tty->termios;
-	if ((ts->c_cflag & CBAUD) == 0)  { /* Begin CBAUD detected */
-		cmdHead = readw(&bc->rin);
-		writew(cmdHead, &bc->rout);
-		cmdHead = readw(&bc->tin);
-		/* Changing baud in mid-stream transmission can be wonderful */
-		/*
-		 * Flush current transmit buffer by setting cmdTail pointer
-		 * (tout) to cmdHead pointer (tin). Hopefully the transmit
-		 * buffer is empty.
-		 */
-		fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0);
-		mval = 0;
-	} else { /* Begin CBAUD not detected */
-		/*
-		 * c_cflags have changed but that change had nothing to do with
-		 * BAUD. Propagate the change to the card.
-		 */
-		cflag = termios2digi_c(ch, ts->c_cflag);
-		if (cflag != ch->fepcflag)  {
-			ch->fepcflag = cflag;
-			/* Set baud rate, char size, stop bits, parity */
-			fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0);
-		}
-		/*
-		 * If the user has not forced CLOCAL and if the device is not a
-		 * CALLOUT device (Which is always CLOCAL) we set flags such
-		 * that the driver will wait on carrier detect.
-		 */
-		if (ts->c_cflag & CLOCAL)
-			clear_bit(ASYNCB_CHECK_CD, &ch->port.flags);
-		else
-			set_bit(ASYNCB_CHECK_CD, &ch->port.flags);
-		mval = ch->m_dtr | ch->m_rts;
-	} /* End CBAUD not detected */
-	iflag = termios2digi_i(ch, ts->c_iflag);
-	/* Check input mode flags */
-	if (iflag != ch->fepiflag)  {
-		ch->fepiflag = iflag;
-		/*
-		 * Command sets channels iflag structure on the board. Such
-		 * things as input soft flow control, handling of parity
-		 * errors, and break handling are all set here.
-		 *
-		 * break handling, parity handling, input stripping,
-		 * flow control chars
-		 */
-		fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
-	}
-	/*
-	 * Set the board mint value for this channel. This will cause hardware
-	 * events to be generated each time the DCD signal (Described in mint)
-	 * changes.
-	 */
-	writeb(ch->dcd, &bc->mint);
-	if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD))
-		if (ch->digiext.digi_flags & DIGI_FORCEDCD)
-			writeb(0, &bc->mint);
-	ch->imodem = readb(&bc->mstat);
-	hflow = termios2digi_h(ch, ts->c_cflag);
-	if (hflow != ch->hflow)  {
-		ch->hflow = hflow;
-		/*
-		 * Hard flow control has been selected but the board is not
-		 * using it. Activate hard flow control now.
-		 */
-		fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1);
-	}
-	mval ^= ch->modemfake & (mval ^ ch->modem);
-
-	if (ch->omodem ^ mval)  {
-		ch->omodem = mval;
-		/*
-		 * The below command sets the DTR and RTS mstat structure. If
-		 * hard flow control is NOT active these changes will drive the
-		 * output of the actual DTR and RTS lines. If hard flow control
-		 * is active, the changes will be saved in the mstat structure
-		 * and only asserted when hard flow control is turned off.
-		 */
-
-		/* First reset DTR & RTS; then set them */
-		fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1);
-		fepcmd(ch, SETMODEM, mval, 0, 0, 1);
-	}
-	if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc)  {
-		ch->fepstartc = ch->startc;
-		ch->fepstopc = ch->stopc;
-		/*
-		 * The XON / XOFF characters have changed; propagate these
-		 * changes to the card.
-		 */
-		fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
-	}
-	if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca)  {
-		ch->fepstartca = ch->startca;
-		ch->fepstopca = ch->stopca;
-		/*
-		 * Similar to the above, this time the auxilarly XON / XOFF
-		 * characters have changed; propagate these changes to the card.
-		 */
-		fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
-	}
-}
-
-/* Caller holds lock */
-static void receive_data(struct channel *ch, struct tty_struct *tty)
-{
-	unchar *rptr;
-	struct ktermios *ts = NULL;
-	struct board_chan __iomem *bc;
-	int dataToRead, wrapgap, bytesAvailable;
-	unsigned int tail, head;
-	unsigned int wrapmask;
-
-	/*
-	 * This routine is called by doint when a receive data event has taken
-	 * place.
-	 */
-	globalwinon(ch);
-	if (ch->statusflags & RXSTOPPED)
-		return;
-	if (tty)
-		ts = tty->termios;
-	bc = ch->brdchan;
-	BUG_ON(!bc);
-	wrapmask = ch->rxbufsize - 1;
-
-	/*
-	 * Get the head and tail pointers to the receiver queue. Wrap the head
-	 * pointer if it has reached the end of the buffer.
-	 */
-	head = readw(&bc->rin);
-	head &= wrapmask;
-	tail = readw(&bc->rout) & wrapmask;
-
-	bytesAvailable = (head - tail) & wrapmask;
-	if (bytesAvailable == 0)
-		return;
-
-	/* If CREAD bit is off or device not open, set TX tail to head */
-	if (!tty || !ts || !(ts->c_cflag & CREAD)) {
-		writew(head, &bc->rout);
-		return;
-	}
-
-	if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0)
-		return;
-
-	if (readb(&bc->orun)) {
-		writeb(0, &bc->orun);
-		printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",
-								tty->name);
-		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-	}
-	rxwinon(ch);
-	while (bytesAvailable > 0) {
-		/* Begin while there is data on the card */
-		wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
-		/*
-		 * Even if head has wrapped around only report the amount of
-		 * data to be equal to the size - tail. Remember memcpy can't
-		 * automaticly wrap around the receive buffer.
-		 */
-		dataToRead = (wrapgap < bytesAvailable) ? wrapgap
-							: bytesAvailable;
-		/* Make sure we don't overflow the buffer */
-		dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
-		if (dataToRead == 0)
-			break;
-		/*
-		 * Move data read from our card into the line disciplines
-		 * buffer for translation if necessary.
-		 */
-		memcpy_fromio(rptr, ch->rxptr + tail, dataToRead);
-		tail = (tail + dataToRead) & wrapmask;
-		bytesAvailable -= dataToRead;
-	} /* End while there is data on the card */
-	globalwinon(ch);
-	writew(tail, &bc->rout);
-	/* Must be called with global data */
-	tty_schedule_flip(tty);
-}
-
-static int info_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case DIGI_GETINFO:
-		{
-			struct digi_info di;
-			int brd;
-
-			if (get_user(brd, (unsigned int __user *)arg))
-				return -EFAULT;
-			if (brd < 0 || brd >= num_cards || num_cards == 0)
-				return -ENODEV;
-
-			memset(&di, 0, sizeof(di));
-
-			di.board = brd;
-			di.status = boards[brd].status;
-			di.type = boards[brd].type ;
-			di.numports = boards[brd].numports ;
-			/* Legacy fixups - just move along nothing to see */
-			di.port = (unsigned char *)boards[brd].port ;
-			di.membase = (unsigned char *)boards[brd].membase ;
-
-			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
-				return -EFAULT;
-			break;
-
-		}
-
-	case DIGI_POLLER:
-		{
-			int brd = arg & 0xff000000 >> 16;
-			unsigned char state = arg & 0xff;
-
-			if (brd < 0 || brd >= num_cards) {
-				printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n");
-				return -ENODEV;
-			}
-			digi_poller_inhibited = state;
-			break;
-		}
-
-	case DIGI_INIT:
-		{
-			/*
-			 * This call is made by the apps to complete the
-			 * initialization of the board(s). This routine is
-			 * responsible for setting the card to its initial
-			 * state and setting the drivers control fields to the
-			 * sutianle settings for the card in question.
-			 */
-			int crd;
-			for (crd = 0; crd < num_cards; crd++)
-				post_fep_init(crd);
-			break;
-		}
-	default:
-		return -ENOTTY;
-	}
-	return 0;
-}
-
-static int pc_tiocmget(struct tty_struct *tty)
-{
-	struct channel *ch = tty->driver_data;
-	struct board_chan __iomem *bc;
-	unsigned int mstat, mflag = 0;
-	unsigned long flags;
-
-	if (ch)
-		bc = ch->brdchan;
-	else
-		return -EINVAL;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	globalwinon(ch);
-	mstat = readb(&bc->mstat);
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-
-	if (mstat & ch->m_dtr)
-		mflag |= TIOCM_DTR;
-	if (mstat & ch->m_rts)
-		mflag |= TIOCM_RTS;
-	if (mstat & ch->m_cts)
-		mflag |= TIOCM_CTS;
-	if (mstat & ch->dsr)
-		mflag |= TIOCM_DSR;
-	if (mstat & ch->m_ri)
-		mflag |= TIOCM_RI;
-	if (mstat & ch->dcd)
-		mflag |= TIOCM_CD;
-	return mflag;
-}
-
-static int pc_tiocmset(struct tty_struct *tty,
-		       unsigned int set, unsigned int clear)
-{
-	struct channel *ch = tty->driver_data;
-	unsigned long flags;
-
-	if (!ch)
-		return -EINVAL;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	/*
-	 * I think this modemfake stuff is broken. It doesn't correctly reflect
-	 * the behaviour desired by the TIOCM* ioctls. Therefore this is
-	 * probably broken.
-	 */
-	if (set & TIOCM_RTS) {
-		ch->modemfake |= ch->m_rts;
-		ch->modem |= ch->m_rts;
-	}
-	if (set & TIOCM_DTR) {
-		ch->modemfake |= ch->m_dtr;
-		ch->modem |= ch->m_dtr;
-	}
-	if (clear & TIOCM_RTS) {
-		ch->modemfake |= ch->m_rts;
-		ch->modem &= ~ch->m_rts;
-	}
-	if (clear & TIOCM_DTR) {
-		ch->modemfake |= ch->m_dtr;
-		ch->modem &= ~ch->m_dtr;
-	}
-	globalwinon(ch);
-	/*
-	 * The below routine generally sets up parity, baud, flow control
-	 * issues, etc.... It effect both control flags and input flags.
-	 */
-	epcaparam(tty, ch);
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-	return 0;
-}
-
-static int pc_ioctl(struct tty_struct *tty,
-					unsigned int cmd, unsigned long arg)
-{
-	digiflow_t dflow;
-	unsigned long flags;
-	unsigned int mflag, mstat;
-	unsigned char startc, stopc;
-	struct board_chan __iomem *bc;
-	struct channel *ch = tty->driver_data;
-	void __user *argp = (void __user *)arg;
-
-	if (ch)
-		bc = ch->brdchan;
-	else
-		return -EINVAL;
-	switch (cmd) {
-	case TIOCMODG:
-		mflag = pc_tiocmget(tty);
-		if (put_user(mflag, (unsigned long __user *)argp))
-			return -EFAULT;
-		break;
-	case TIOCMODS:
-		if (get_user(mstat, (unsigned __user *)argp))
-			return -EFAULT;
-		return pc_tiocmset(tty, mstat, ~mstat);
-	case TIOCSDTR:
-		spin_lock_irqsave(&epca_lock, flags);
-		ch->omodem |= ch->m_dtr;
-		globalwinon(ch);
-		fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1);
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-		break;
-
-	case TIOCCDTR:
-		spin_lock_irqsave(&epca_lock, flags);
-		ch->omodem &= ~ch->m_dtr;
-		globalwinon(ch);
-		fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1);
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-		break;
-	case DIGI_GETA:
-		if (copy_to_user(argp, &ch->digiext, sizeof(digi_t)))
-			return -EFAULT;
-		break;
-	case DIGI_SETAW:
-	case DIGI_SETAF:
-		if (cmd == DIGI_SETAW) {
-			/* Setup an event to indicate when the transmit
-			   buffer empties */
-			spin_lock_irqsave(&epca_lock, flags);
-			setup_empty_event(tty, ch);
-			spin_unlock_irqrestore(&epca_lock, flags);
-			tty_wait_until_sent(tty, 0);
-		} else {
-			/* ldisc lock already held in ioctl */
-			if (tty->ldisc->ops->flush_buffer)
-				tty->ldisc->ops->flush_buffer(tty);
-		}
-		/* Fall Thru */
-	case DIGI_SETA:
-		if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
-			return -EFAULT;
-
-		if (ch->digiext.digi_flags & DIGI_ALTPIN)  {
-			ch->dcd = ch->m_dsr;
-			ch->dsr = ch->m_dcd;
-		} else {
-			ch->dcd = ch->m_dcd;
-			ch->dsr = ch->m_dsr;
-			}
-
-		spin_lock_irqsave(&epca_lock, flags);
-		globalwinon(ch);
-
-		/*
-		 * The below routine generally sets up parity, baud, flow
-		 * control issues, etc.... It effect both control flags and
-		 * input flags.
-		 */
-		epcaparam(tty, ch);
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-		break;
-
-	case DIGI_GETFLOW:
-	case DIGI_GETAFLOW:
-		spin_lock_irqsave(&epca_lock, flags);
-		globalwinon(ch);
-		if (cmd == DIGI_GETFLOW) {
-			dflow.startc = readb(&bc->startc);
-			dflow.stopc = readb(&bc->stopc);
-		} else {
-			dflow.startc = readb(&bc->startca);
-			dflow.stopc = readb(&bc->stopca);
-		}
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-
-		if (copy_to_user(argp, &dflow, sizeof(dflow)))
-			return -EFAULT;
-		break;
-
-	case DIGI_SETAFLOW:
-	case DIGI_SETFLOW:
-		if (cmd == DIGI_SETFLOW) {
-			startc = ch->startc;
-			stopc = ch->stopc;
-		} else {
-			startc = ch->startca;
-			stopc = ch->stopca;
-		}
-
-		if (copy_from_user(&dflow, argp, sizeof(dflow)))
-			return -EFAULT;
-
-		if (dflow.startc != startc || dflow.stopc != stopc) {
-			/* Begin  if setflow toggled */
-			spin_lock_irqsave(&epca_lock, flags);
-			globalwinon(ch);
-
-			if (cmd == DIGI_SETFLOW) {
-				ch->fepstartc = ch->startc = dflow.startc;
-				ch->fepstopc = ch->stopc = dflow.stopc;
-				fepcmd(ch, SONOFFC, ch->fepstartc,
-						ch->fepstopc, 0, 1);
-			} else {
-				ch->fepstartca = ch->startca = dflow.startc;
-				ch->fepstopca  = ch->stopca = dflow.stopc;
-				fepcmd(ch, SAUXONOFFC, ch->fepstartca,
-						ch->fepstopca, 0, 1);
-			}
-
-			if (ch->statusflags & TXSTOPPED)
-				pc_start(tty);
-
-			memoff(ch);
-			spin_unlock_irqrestore(&epca_lock, flags);
-		} /* End if setflow toggled */
-		break;
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct channel *ch;
-	unsigned long flags;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-
-	if (ch != NULL)  { /* Begin if channel valid */
-		spin_lock_irqsave(&epca_lock, flags);
-		globalwinon(ch);
-		epcaparam(tty, ch);
-		memoff(ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-
-		if ((old_termios->c_cflag & CRTSCTS) &&
-			 ((tty->termios->c_cflag & CRTSCTS) == 0))
-			tty->hw_stopped = 0;
-
-		if (!(old_termios->c_cflag & CLOCAL) &&
-			 (tty->termios->c_cflag & CLOCAL))
-			wake_up_interruptible(&ch->port.open_wait);
-
-	} /* End if channel valid */
-}
-
-static void do_softint(struct work_struct *work)
-{
-	struct channel *ch = container_of(work, struct channel, tqueue);
-	/* Called in response to a modem change event */
-	if (ch && ch->magic == EPCA_MAGIC) {
-		struct tty_struct *tty = tty_port_tty_get(&ch->port);
-
-		if (tty && tty->driver_data) {
-			if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
-				tty_hangup(tty);
-				wake_up_interruptible(&ch->port.open_wait);
-				clear_bit(ASYNCB_NORMAL_ACTIVE,
-						&ch->port.flags);
-			}
-		}
-		tty_kref_put(tty);
-	}
-}
-
-/*
- * pc_stop and pc_start provide software flow control to the routine and the
- * pc_ioctl routine.
- */
-static void pc_stop(struct tty_struct *tty)
-{
-	struct channel *ch;
-	unsigned long flags;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		spin_lock_irqsave(&epca_lock, flags);
-		if ((ch->statusflags & TXSTOPPED) == 0) {
-			/* Begin if transmit stop requested */
-			globalwinon(ch);
-			/* STOP transmitting now !! */
-			fepcmd(ch, PAUSETX, 0, 0, 0, 0);
-			ch->statusflags |= TXSTOPPED;
-			memoff(ch);
-		} /* End if transmit stop requested */
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-}
-
-static void pc_start(struct tty_struct *tty)
-{
-	struct channel *ch;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		unsigned long flags;
-		spin_lock_irqsave(&epca_lock, flags);
-		/* Just in case output was resumed because of a change
-		   in Digi-flow */
-		if (ch->statusflags & TXSTOPPED)  {
-			/* Begin transmit resume requested */
-			struct board_chan __iomem *bc;
-			globalwinon(ch);
-			bc = ch->brdchan;
-			if (ch->statusflags & LOWWAIT)
-				writeb(1, &bc->ilow);
-			/* Okay, you can start transmitting again... */
-			fepcmd(ch, RESUMETX, 0, 0, 0, 0);
-			ch->statusflags &= ~TXSTOPPED;
-			memoff(ch);
-		} /* End transmit resume requested */
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-}
-
-/*
- * The below routines pc_throttle and pc_unthrottle are used to slow (And
- * resume) the receipt of data into the kernels receive buffers. The exact
- * occurrence of this depends on the size of the kernels receive buffer and
- * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for
- * more details.
- */
-static void pc_throttle(struct tty_struct *tty)
-{
-	struct channel *ch;
-	unsigned long flags;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		spin_lock_irqsave(&epca_lock, flags);
-		if ((ch->statusflags & RXSTOPPED) == 0) {
-			globalwinon(ch);
-			fepcmd(ch, PAUSERX, 0, 0, 0, 0);
-			ch->statusflags |= RXSTOPPED;
-			memoff(ch);
-		}
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-}
-
-static void pc_unthrottle(struct tty_struct *tty)
-{
-	struct channel *ch;
-	unsigned long flags;
-	/*
-	 * verifyChannel returns the channel from the tty struct if it is
-	 * valid. This serves as a sanity check.
-	 */
-	ch = verifyChannel(tty);
-	if (ch != NULL) {
-		/* Just in case output was resumed because of a change
-		   in Digi-flow */
-		spin_lock_irqsave(&epca_lock, flags);
-		if (ch->statusflags & RXSTOPPED) {
-			globalwinon(ch);
-			fepcmd(ch, RESUMERX, 0, 0, 0, 0);
-			ch->statusflags &= ~RXSTOPPED;
-			memoff(ch);
-		}
-		spin_unlock_irqrestore(&epca_lock, flags);
-	}
-}
-
-static int pc_send_break(struct tty_struct *tty, int msec)
-{
-	struct channel *ch = tty->driver_data;
-	unsigned long flags;
-
-	if (msec == -1)
-		msec = 0xFFFF;
-	else if (msec > 0xFFFE)
-		msec = 0xFFFE;
-	else if (msec < 1)
-		msec = 1;
-
-	spin_lock_irqsave(&epca_lock, flags);
-	globalwinon(ch);
-	/*
-	 * Maybe I should send an infinite break here, schedule() for msec
-	 * amount of time, and then stop the break. This way, the user can't
-	 * screw up the FEP by causing digi_send_break() to be called (i.e. via
-	 * an ioctl()) more than once in msec amount of time.
-	 * Try this for now...
-	 */
-	fepcmd(ch, SENDBREAK, msec, 0, 10, 0);
-	memoff(ch);
-	spin_unlock_irqrestore(&epca_lock, flags);
-	return 0;
-}
-
-/* Caller MUST hold the lock */
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
-{
-	struct board_chan __iomem *bc = ch->brdchan;
-
-	globalwinon(ch);
-	ch->statusflags |= EMPTYWAIT;
-	/*
-	 * When set the iempty flag request a event to be generated when the
-	 * transmit buffer is empty (If there is no BREAK in progress).
-	 */
-	writeb(1, &bc->iempty);
-	memoff(ch);
-}
-
-#ifndef MODULE
-static void __init epca_setup(char *str, int *ints)
-{
-	struct board_info board;
-	int               index, loop, last;
-	char              *temp, *t2;
-	unsigned          len;
-
-	/*
-	 * If this routine looks a little strange it is because it is only
-	 * called if a LILO append command is given to boot the kernel with
-	 * parameters. In this way, we can provide the user a method of
-	 * changing his board configuration without rebuilding the kernel.
-	 */
-	if (!liloconfig)
-		liloconfig = 1;
-
-	memset(&board, 0, sizeof(board));
-
-	/* Assume the data is int first, later we can change it */
-	/* I think that array position 0 of ints holds the number of args */
-	for (last = 0, index = 1; index <= ints[0]; index++)
-		switch (index) { /* Begin parse switch */
-		case 1:
-			board.status = ints[index];
-			/*
-			 * We check for 2 (As opposed to 1; because 2 is a flag
-			 * instructing the driver to ignore epcaconfig.) For
-			 * this reason we check for 2.
-			 */
-			if (board.status == 2) {
-			/* Begin ignore epcaconfig as well as lilo cmd line */
-				nbdevs = 0;
-				num_cards = 0;
-				return;
-			} /* End ignore epcaconfig as well as lilo cmd line */
-
-			if (board.status > 2) {
-				printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n",
-						board.status);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_BOARD_STATUS;
-				return;
-			}
-			last = index;
-			break;
-		case 2:
-			board.type = ints[index];
-			if (board.type >= PCIXEM)  {
-				printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_BOARD_TYPE;
-				return;
-			}
-			last = index;
-			break;
-		case 3:
-			board.altpin = ints[index];
-			if (board.altpin > 1) {
-				printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_ALTPIN;
-				return;
-			}
-			last = index;
-			break;
-
-		case 4:
-			board.numports = ints[index];
-			if (board.numports < 2 || board.numports > 256) {
-				printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_NUM_PORTS;
-				return;
-			}
-			nbdevs += board.numports;
-			last = index;
-			break;
-
-		case 5:
-			board.port = ints[index];
-			if (ints[index] <= 0) {
-				printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_PORT_BASE;
-				return;
-			}
-			last = index;
-			break;
-
-		case 6:
-			board.membase = ints[index];
-			if (ints[index] <= 0) {
-				printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",
-					(unsigned int)board.membase);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_MEM_BASE;
-				return;
-			}
-			last = index;
-			break;
-
-		default:
-			printk(KERN_ERR "<Error> - epca_setup: Too many integer parms\n");
-			return;
-
-		} /* End parse switch */
-
-	while (str && *str)  { /* Begin while there is a string arg */
-		/* find the next comma or terminator */
-		temp = str;
-		/* While string is not null, and a comma hasn't been found */
-		while (*temp && (*temp != ','))
-			temp++;
-		if (!*temp)
-			temp = NULL;
-		else
-			*temp++ = 0;
-		/* Set index to the number of args + 1 */
-		index = last + 1;
-
-		switch (index) {
-		case 1:
-			len = strlen(str);
-			if (strncmp("Disable", str, len) == 0)
-				board.status = 0;
-			else if (strncmp("Enable", str, len) == 0)
-				board.status = 1;
-			else {
-				printk(KERN_ERR "epca_setup: Invalid status %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_BOARD_STATUS;
-				return;
-			}
-			last = index;
-			break;
-
-		case 2:
-			for (loop = 0; loop < EPCA_NUM_TYPES; loop++)
-				if (strcmp(board_desc[loop], str) == 0)
-					break;
-			/*
-			 * If the index incremented above refers to a
-			 * legitamate board type set it here.
-			 */
-			if (index < EPCA_NUM_TYPES)
-				board.type = loop;
-			else {
-				printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_BOARD_TYPE;
-				return;
-			}
-			last = index;
-			break;
-
-		case 3:
-			len = strlen(str);
-			if (strncmp("Disable", str, len) == 0)
-				board.altpin = 0;
-			else if (strncmp("Enable", str, len) == 0)
-				board.altpin = 1;
-			else {
-				printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_ALTPIN;
-				return;
-			}
-			last = index;
-			break;
-
-		case 4:
-			t2 = str;
-			while (isdigit(*t2))
-				t2++;
-
-			if (*t2) {
-				printk(KERN_ERR "epca_setup: Invalid port count %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_NUM_PORTS;
-				return;
-			}
-
-			/*
-			 * There is not a man page for simple_strtoul but the
-			 * code can be found in vsprintf.c. The first argument
-			 * is the string to translate (To an unsigned long
-			 * obviously), the second argument can be the address
-			 * of any character variable or a NULL. If a variable
-			 * is given, the end pointer of the string will be
-			 * stored in that variable; if a NULL is given the end
-			 * pointer will not be returned. The last argument is
-			 * the base to use. If a 0 is indicated, the routine
-			 * will attempt to determine the proper base by looking
-			 * at the values prefix (A '0' for octal, a 'x' for
-			 * hex, etc ... If a value is given it will use that
-			 * value as the base.
-			 */
-			board.numports = simple_strtoul(str, NULL, 0);
-			nbdevs += board.numports;
-			last = index;
-			break;
-
-		case 5:
-			t2 = str;
-			while (isxdigit(*t2))
-				t2++;
-
-			if (*t2) {
-				printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_PORT_BASE;
-				return;
-			}
-
-			board.port = simple_strtoul(str, NULL, 16);
-			last = index;
-			break;
-
-		case 6:
-			t2 = str;
-			while (isxdigit(*t2))
-				t2++;
-
-			if (*t2) {
-				printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str);
-				invalid_lilo_config = 1;
-				setup_error_code |= INVALID_MEM_BASE;
-				return;
-			}
-			board.membase = simple_strtoul(str, NULL, 16);
-			last = index;
-			break;
-		default:
-			printk(KERN_ERR "epca: Too many string parms\n");
-			return;
-		}
-		str = temp;
-	} /* End while there is a string arg */
-
-	if (last < 6) {
-		printk(KERN_ERR "epca: Insufficient parms specified\n");
-		return;
-	}
-
-	/* I should REALLY validate the stuff here */
-	/* Copies our local copy of board into boards */
-	memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board));
-	/* Does this get called once per lilo arg are what ? */
-	printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
-		num_cards, board_desc[board.type],
-		board.numports, (int)board.port, (unsigned int) board.membase);
-	num_cards++;
-}
-
-static int __init epca_real_setup(char *str)
-{
-	int ints[11];
-
-	epca_setup(get_options(str, 11, ints), ints);
-	return 1;
-}
-
-__setup("digiepca", epca_real_setup);
-#endif
-
-enum epic_board_types {
-	brd_xr = 0,
-	brd_xem,
-	brd_cx,
-	brd_xrj,
-};
-
-/* indexed directly by epic_board_types enum */
-static struct {
-	unsigned char board_type;
-	unsigned bar_idx;		/* PCI base address region */
-} epca_info_tbl[] = {
-	{ PCIXR, 0, },
-	{ PCIXEM, 0, },
-	{ PCICX, 0, },
-	{ PCIXRJ, 2, },
-};
-
-static int __devinit epca_init_one(struct pci_dev *pdev,
-				 const struct pci_device_id *ent)
-{
-	static int board_num = -1;
-	int board_idx, info_idx = ent->driver_data;
-	unsigned long addr;
-
-	if (pci_enable_device(pdev))
-		return -EIO;
-
-	board_num++;
-	board_idx = board_num + num_cards;
-	if (board_idx >= MAXBOARDS)
-		goto err_out;
-
-	addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx);
-	if (!addr) {
-		printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n",
-			epca_info_tbl[info_idx].bar_idx);
-		goto err_out;
-	}
-
-	boards[board_idx].status = ENABLED;
-	boards[board_idx].type = epca_info_tbl[info_idx].board_type;
-	boards[board_idx].numports = 0x0;
-	boards[board_idx].port = addr + PCI_IO_OFFSET;
-	boards[board_idx].membase = addr;
-
-	if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) {
-		printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
-			0x200000, addr + PCI_IO_OFFSET);
-		goto err_out;
-	}
-
-	boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET,
-								0x200000);
-	if (!boards[board_idx].re_map_port) {
-		printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
-			0x200000, addr + PCI_IO_OFFSET);
-		goto err_out_free_pciio;
-	}
-
-	if (!request_mem_region(addr, 0x200000, "epca")) {
-		printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
-			0x200000, addr);
-		goto err_out_free_iounmap;
-	}
-
-	boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000);
-	if (!boards[board_idx].re_map_membase) {
-		printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
-			0x200000, addr + PCI_IO_OFFSET);
-		goto err_out_free_memregion;
-	}
-
-	/*
-	 * I don't know what the below does, but the hardware guys say its
-	 * required on everything except PLX (In this case XRJ).
-	 */
-	if (info_idx != brd_xrj) {
-		pci_write_config_byte(pdev, 0x40, 0);
-		pci_write_config_byte(pdev, 0x46, 0);
-	}
-
-	return 0;
-
-err_out_free_memregion:
-	release_mem_region(addr, 0x200000);
-err_out_free_iounmap:
-	iounmap(boards[board_idx].re_map_port);
-err_out_free_pciio:
-	release_mem_region(addr + PCI_IO_OFFSET, 0x200000);
-err_out:
-	return -ENODEV;
-}
-
-
-static struct pci_device_id epca_pci_tbl[] = {
-	{ PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr },
-	{ PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem },
-	{ PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx },
-	{ PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
-
-static int __init init_PCI(void)
-{
-	memset(&epca_driver, 0, sizeof(epca_driver));
-	epca_driver.name = "epca";
-	epca_driver.id_table = epca_pci_tbl;
-	epca_driver.probe = epca_init_one;
-
-	return pci_register_driver(&epca_driver);
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/epca.h b/drivers/char/epca.h
deleted file mode 100644
index d414bf2..0000000
--- a/drivers/char/epca.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#define XEMPORTS    0xC02
-#define XEPORTS     0xC22
-
-#define MAX_ALLOC   0x100
-
-#define MAXBOARDS   12
-#define FEPCODESEG  0x0200L
-#define FEPCODE     0x2000L
-#define BIOSCODE    0xf800L
-
-#define MISCGLOBAL  0x0C00L
-#define NPORT       0x0C22L
-#define MBOX        0x0C40L
-#define PORTBASE    0x0C90L
-
-/* Begin code defines used for epca_setup */
-
-#define INVALID_BOARD_TYPE   0x1
-#define INVALID_NUM_PORTS    0x2
-#define INVALID_MEM_BASE     0x4
-#define INVALID_PORT_BASE    0x8
-#define INVALID_BOARD_STATUS 0x10
-#define INVALID_ALTPIN       0x20
-
-/* End code defines used for epca_setup */
-
-
-#define FEPCLR      0x00
-#define FEPMEM      0x02
-#define FEPRST      0x04
-#define FEPINT      0x08
-#define	FEPMASK     0x0e
-#define	FEPWIN      0x80
-
-#define PCXE    0
-#define PCXEVE  1
-#define PCXEM   2   
-#define EISAXEM 3
-#define PC64XE  4
-#define PCXI    5
-#define PCIXEM  7
-#define PCICX   8
-#define PCIXR   9
-#define PCIXRJ  10
-#define EPCA_NUM_TYPES 6
-
-
-static char *board_desc[] = 
-{
-	"PC/Xe",
-	"PC/Xeve",
-	"PC/Xem",
-	"EISA/Xem",
-	"PC/64Xe",
-	"PC/Xi",
-	"unknown",
-	"PCI/Xem",
-	"PCI/CX",
-	"PCI/Xr",
-	"PCI/Xrj",
-};
-
-#define STARTC      021
-#define STOPC       023
-#define IAIXON      0x2000
-
-
-#define TXSTOPPED  0x1
-#define LOWWAIT    0x2
-#define EMPTYWAIT  0x4
-#define RXSTOPPED  0x8
-#define TXBUSY     0x10
-
-#define DISABLED   0
-#define ENABLED    1
-#define OFF        0
-#define ON         1
-
-#define FEPTIMEOUT 200000  
-#define SERIAL_TYPE_INFO    3
-#define EPCA_EVENT_HANGUP   1
-#define EPCA_MAGIC          0x5c6df104L
-
-struct channel 
-{
-	long   magic;
-	struct tty_port port;
-	unsigned char boardnum;
-	unsigned char channelnum;
-	unsigned char omodem;         /* FEP output modem status     */
-	unsigned char imodem;         /* FEP input modem status      */
-	unsigned char modemfake;      /* Modem values to be forced   */
-	unsigned char modem;          /* Force values                */
-	unsigned char hflow;
-	unsigned char dsr;
-	unsigned char dcd;
-	unsigned char m_rts ; 		/* The bits used in whatever FEP */
-	unsigned char m_dcd ;		/* is indiginous to this board to */
-	unsigned char m_dsr ;		/* represent each of the physical */
-	unsigned char m_cts ;		/* handshake lines */
-	unsigned char m_ri ;
-	unsigned char m_dtr ;
-	unsigned char stopc;
-	unsigned char startc;
-	unsigned char stopca;
-	unsigned char startca;
-	unsigned char fepstopc;
-	unsigned char fepstartc;
-	unsigned char fepstopca;
-	unsigned char fepstartca;
-	unsigned char txwin;
-	unsigned char rxwin;
-	unsigned short fepiflag;
-	unsigned short fepcflag;
-	unsigned short fepoflag;
-	unsigned short txbufhead;
-	unsigned short txbufsize;
-	unsigned short rxbufhead;
-	unsigned short rxbufsize;
-	int    close_delay;
-	unsigned long  event;
-	uint   dev;
-	unsigned long  statusflags;
-	unsigned long  c_iflag;
-	unsigned long  c_cflag;
-	unsigned long  c_lflag;
-	unsigned long  c_oflag;
-	unsigned char __iomem *txptr;
-	unsigned char __iomem *rxptr;
-	struct board_info           *board;
-	struct board_chan	    __iomem *brdchan;
-	struct digi_struct          digiext;
-	struct work_struct          tqueue;
-	struct global_data 	    __iomem *mailbox;
-};
-
-struct board_info	
-{
-	unsigned char status;
-	unsigned char type;
-	unsigned char altpin;
-	unsigned short numports;
-	unsigned long port;
-	unsigned long membase;
-	void __iomem *re_map_port;
-	void __iomem *re_map_membase;
-	unsigned long  memory_seg;
-	void ( * memwinon )	(struct board_info *, unsigned int) ;
-	void ( * memwinoff ) 	(struct board_info *, unsigned int) ;
-	void ( * globalwinon )	(struct channel *) ;
-	void ( * txwinon ) 	(struct channel *) ;
-	void ( * rxwinon )	(struct channel *) ;
-	void ( * memoff )	(struct channel *) ;
-	void ( * assertgwinon )	(struct channel *) ;
-	void ( * assertmemoff )	(struct channel *) ;
-	unsigned char poller_inhibited ;
-};
-
diff --git a/drivers/char/epcaconfig.h b/drivers/char/epcaconfig.h
deleted file mode 100644
index 55dec06..0000000
--- a/drivers/char/epcaconfig.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define NUMCARDS 0
-#define NBDEVS 0
-
-struct board_info static_boards[NUMCARDS]={
-};
-
-/* DO NOT HAND EDIT THIS FILE! */
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
deleted file mode 100644
index 7b78e0d..0000000
--- a/drivers/char/ip2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Computone IntelliPort Plus Driver
-#
-
-obj-$(CONFIG_COMPUTONE)         += ip2.o
-
-ip2-y			:= ip2main.o
-
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
deleted file mode 100644
index e7af647..0000000
--- a/drivers/char/ip2/i2cmd.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Definition table for In-line and Bypass commands. Applicable
-*                only when the standard loadware is active. (This is included
-*                source code, not a separate compilation module.)
-*
-*******************************************************************************/
-
-//------------------------------------------------------------------------------
-//
-// Revision History:
-//
-// 10 October 1991   MAG First Draft
-//  7 November 1991  MAG Reflects additional commands.
-// 24 February 1992  MAG Additional commands for 1.4.x loadware
-// 11 March 1992     MAG Additional commands
-// 30 March 1992     MAG Additional command: CMD_DSS_NOW
-// 18 May 1992       MAG Discovered commands 39 & 40 must be at the end of a
-//                       packet: affects implementation.
-//------------------------------------------------------------------------------
-
-//************
-//* Includes *
-//************
-
-#include "i2cmd.h"   /* To get some bit-defines */
-
-//------------------------------------------------------------------------------
-// Here is the table of global arrays which represent each type of command
-// supported in the IntelliPort standard loadware. See also i2cmd.h
-// for a more complete explanation of what is going on.
-//------------------------------------------------------------------------------
-
-// Here are the various globals: note that the names are not used except through
-// the macros defined in i2cmd.h. Also note that although they are character
-// arrays here (for extendability) they are cast to structure pointers in the
-// i2cmd.h macros. See i2cmd.h for flags definitions.
-
-//                     Length Flags Command
-static UCHAR ct02[] = { 1, BTH,     0x02                     }; // DTR UP
-static UCHAR ct03[] = { 1, BTH,     0x03                     }; // DTR DN
-static UCHAR ct04[] = { 1, BTH,     0x04                     }; // RTS UP
-static UCHAR ct05[] = { 1, BTH,     0x05                     }; // RTS DN
-static UCHAR ct06[] = { 1, BYP,     0x06                     }; // START FL
-static UCHAR ct07[] = { 2, BTH,     0x07,0                   }; // BAUD
-static UCHAR ct08[] = { 2, BTH,     0x08,0                   }; // BITS
-static UCHAR ct09[] = { 2, BTH,     0x09,0                   }; // STOP
-static UCHAR ct10[] = { 2, BTH,     0x0A,0                   }; // PARITY
-static UCHAR ct11[] = { 2, BTH,     0x0B,0                   }; // XON
-static UCHAR ct12[] = { 2, BTH,     0x0C,0                   }; // XOFF
-static UCHAR ct13[] = { 1, BTH,     0x0D                     }; // STOP FL
-static UCHAR ct14[] = { 1, BYP|VIP, 0x0E                     }; // ACK HOTK
-//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0                   }; // IRQ SET
-static UCHAR ct16[] = { 2, INL,     0x10,0                   }; // IXONOPTS
-static UCHAR ct17[] = { 2, INL,     0x11,0                   }; // OXONOPTS
-static UCHAR ct18[] = { 1, INL,     0x12                     }; // CTSENAB
-static UCHAR ct19[] = { 1, BTH,     0x13                     }; // CTSDSAB
-static UCHAR ct20[] = { 1, INL,     0x14                     }; // DCDENAB
-static UCHAR ct21[] = { 1, BTH,     0x15                     }; // DCDDSAB
-static UCHAR ct22[] = { 1, BTH,     0x16                     }; // DSRENAB
-static UCHAR ct23[] = { 1, BTH,     0x17                     }; // DSRDSAB
-static UCHAR ct24[] = { 1, BTH,     0x18                     }; // RIENAB
-static UCHAR ct25[] = { 1, BTH,     0x19                     }; // RIDSAB
-static UCHAR ct26[] = { 2, BTH,     0x1A,0                   }; // BRKENAB
-static UCHAR ct27[] = { 1, BTH,     0x1B                     }; // BRKDSAB
-//static UCHAR ct28[]={ 2, BTH,     0x1C,0                   }; // MAXBLOKSIZE
-//static UCHAR ct29[]={ 2, 0,       0x1D,0                   }; // reserved
-static UCHAR ct30[] = { 1, INL,     0x1E                     }; // CTSFLOWENAB
-static UCHAR ct31[] = { 1, INL,     0x1F                     }; // CTSFLOWDSAB
-static UCHAR ct32[] = { 1, INL,     0x20                     }; // RTSFLOWENAB
-static UCHAR ct33[] = { 1, INL,     0x21                     }; // RTSFLOWDSAB
-static UCHAR ct34[] = { 2, BTH,     0x22,0                   }; // ISTRIPMODE
-static UCHAR ct35[] = { 2, BTH|END, 0x23,0                   }; // SENDBREAK
-static UCHAR ct36[] = { 2, BTH,     0x24,0                   }; // SETERRMODE
-//static UCHAR ct36a[]={ 3, INL,    0x24,0,0                 }; // SET_REPLACE
-
-// The following is listed for completeness, but should never be sent directly
-// by user-level code. It is sent only by library routines in response to data
-// movement.
-//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0             }; // FLOW PACKET
-
-// Back to normal
-//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ
-//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0                 }; // OPOSTON
-//static UCHAR ct40[]={ 1, BTH|END, 0x28                     }; // OPOSTOFF
-static UCHAR ct41[] = { 1, BYP,     0x29                     }; // RESUME
-//static UCHAR ct42[]={ 2, BTH,     0x2A,0                   }; // TXBAUD
-//static UCHAR ct43[]={ 2, BTH,     0x2B,0                   }; // RXBAUD
-//static UCHAR ct44[]={ 2, BTH,     0x2C,0                   }; // MS PING
-//static UCHAR ct45[]={ 1, BTH,     0x2D                     }; // HOTENAB
-//static UCHAR ct46[]={ 1, BTH,     0x2E                     }; // HOTDSAB
-//static UCHAR ct47[]={ 7, BTH,     0x2F,0,0,0,0,0,0         }; // UNIX FLAGS
-//static UCHAR ct48[]={ 1, BTH,     0x30                     }; // DSRFLOWENAB
-//static UCHAR ct49[]={ 1, BTH,     0x31                     }; // DSRFLOWDSAB
-//static UCHAR ct50[]={ 1, BTH,     0x32                     }; // DTRFLOWENAB
-//static UCHAR ct51[]={ 1, BTH,     0x33                     }; // DTRFLOWDSAB
-//static UCHAR ct52[]={ 1, BTH,     0x34                     }; // BAUDTABRESET
-//static UCHAR ct53[] = { 3, BTH,     0x35,0,0                 }; // BAUDREMAP
-static UCHAR ct54[] = { 3, BTH,     0x36,0,0                 }; // CUSTOMBAUD1
-static UCHAR ct55[] = { 3, BTH,     0x37,0,0                 }; // CUSTOMBAUD2
-static UCHAR ct56[] = { 2, BTH|END, 0x38,0                   }; // PAUSE
-static UCHAR ct57[] = { 1, BYP,     0x39                     }; // SUSPEND
-static UCHAR ct58[] = { 1, BYP,     0x3A                     }; // UNSUSPEND
-static UCHAR ct59[] = { 2, BTH,     0x3B,0                   }; // PARITYCHK
-static UCHAR ct60[] = { 1, INL|VIP, 0x3C                     }; // BOOKMARKREQ
-//static UCHAR ct61[]={ 2, BTH,     0x3D,0                   }; // INTERNALLOOP
-//static UCHAR ct62[]={ 2, BTH,     0x3E,0                   }; // HOTKTIMEOUT
-static UCHAR ct63[] = { 2, INL,     0x3F,0                   }; // SETTXON
-static UCHAR ct64[] = { 2, INL,     0x40,0                   }; // SETTXOFF
-//static UCHAR ct65[]={ 2, BTH,     0x41,0                   }; // SETAUTORTS
-//static UCHAR ct66[]={ 2, BTH,     0x42,0                   }; // SETHIGHWAT
-//static UCHAR ct67[]={ 2, BYP,     0x43,0                   }; // STARTSELFL
-//static UCHAR ct68[]={ 2, INL,     0x44,0                   }; // ENDSELFL
-//static UCHAR ct69[]={ 1, BYP,     0x45                     }; // HWFLOW_OFF
-//static UCHAR ct70[]={ 1, BTH,     0x46                     }; // ODSRFL_ENAB
-//static UCHAR ct71[]={ 1, BTH,     0x47                     }; // ODSRFL_DSAB
-//static UCHAR ct72[]={ 1, BTH,     0x48                     }; // ODCDFL_ENAB
-//static UCHAR ct73[]={ 1, BTH,     0x49                     }; // ODCDFL_DSAB
-//static UCHAR ct74[]={ 2, BTH,     0x4A,0                   }; // LOADLEVEL
-//static UCHAR ct75[]={ 2, BTH,     0x4B,0                   }; // STATDATA
-//static UCHAR ct76[]={ 1, BYP,     0x4C                     }; // BREAK_ON
-//static UCHAR ct77[]={ 1, BYP,     0x4D                     }; // BREAK_OFF
-//static UCHAR ct78[]={ 1, BYP,     0x4E                     }; // GETFC
-static UCHAR ct79[] = { 2, BYP,     0x4F,0                   }; // XMIT_NOW
-//static UCHAR ct80[]={ 4, BTH,     0x50,0,0,0               }; // DIVISOR_LATCH
-//static UCHAR ct81[]={ 1, BYP,     0x51                     }; // GET_STATUS
-//static UCHAR ct82[]={ 1, BYP,     0x52                     }; // GET_TXCNT
-//static UCHAR ct83[]={ 1, BYP,     0x53                     }; // GET_RXCNT
-//static UCHAR ct84[]={ 1, BYP,     0x54                     }; // GET_BOXIDS
-//static UCHAR ct85[]={10, BYP,     0x55,0,0,0,0,0,0,0,0,0   }; // ENAB_MULT
-//static UCHAR ct86[]={ 2, BTH,     0x56,0                   }; // RCV_ENABLE
-static UCHAR ct87[] = { 1, BYP,     0x57                     }; // HW_TEST
-//static UCHAR ct88[]={ 3, BTH,     0x58,0,0                 }; // RCV_THRESHOLD
-//static UCHAR ct90[]={ 3, BYP,     0x5A,0,0                 }; // Set SILO
-//static UCHAR ct91[]={ 2, BYP,     0x5B,0                   }; // timed break
-
-// Some composite commands as well
-//static UCHAR cc01[]={ 2, BTH,     0x02,0x04                }; // DTR & RTS UP
-//static UCHAR cc02[]={ 2, BTH,     0x03,0x05                }; // DTR & RTS DN
-
-//********
-//* Code *
-//********
-
-//******************************************************************************
-// Function:   i2cmdUnixFlags(iflag, cflag, lflag)
-// Parameters: Unix tty flags
-//
-// Returns:    Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of command 47 and returns a pointer to the
-// appropriate structure.
-//******************************************************************************
-#if 0
-cmdSyntaxPtr
-i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag)
-{
-	cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47;
-
-	pCM->cmd[1] = (unsigned char)  iflag;
-	pCM->cmd[2] = (unsigned char) (iflag >> 8);
-	pCM->cmd[3] = (unsigned char)  cflag;
-	pCM->cmd[4] = (unsigned char) (cflag >> 8);
-	pCM->cmd[5] = (unsigned char)  lflag;
-	pCM->cmd[6] = (unsigned char) (lflag >> 8);
-	return pCM;
-}
-#endif  /*  0  */
-
-//******************************************************************************
-// Function:   i2cmdBaudDef(which, rate)
-// Parameters: ?
-//
-// Returns:    Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of commands 54 or 55 (according to the
-// argument which), and returns a pointer to the appropriate structure.
-//******************************************************************************
-static cmdSyntaxPtr
-i2cmdBaudDef(int which, unsigned short rate)
-{
-	cmdSyntaxPtr pCM;
-
-	switch(which)
-	{
-	case 1:
-		pCM = (cmdSyntaxPtr) ct54;
-		break;
-	default:
-	case 2:
-		pCM = (cmdSyntaxPtr) ct55;
-		break;
-	}
-	pCM->cmd[1] = (unsigned char) rate;
-	pCM->cmd[2] = (unsigned char) (rate >> 8);
-	return pCM;
-}
-
diff --git a/drivers/char/ip2/i2cmd.h b/drivers/char/ip2/i2cmd.h
deleted file mode 100644
index 29277ec..0000000
--- a/drivers/char/ip2/i2cmd.h
+++ /dev/null
@@ -1,630 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Definitions and support for In-line and Bypass commands.
-*                Applicable only when the standard loadware is active.
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 10 October 1991   MAG First Draft
-//  7 November 1991  MAG Reflects some new commands
-// 20 February 1992  MAG CMD_HOTACK corrected: no argument.
-// 24 February 1992  MAG Support added for new commands for 1.4.x loadware.
-// 11 March 1992     MAG Additional commands.
-// 16 March 1992     MAG Additional commands.
-// 30 March 1992     MAG Additional command: CMD_DSS_NOW
-// 18 May   1992     MAG Changed CMD_OPOST
-//
-//------------------------------------------------------------------------------
-#ifndef I2CMD_H      // To prevent multiple includes
-#define I2CMD_H   1
-
-#include "ip2types.h"
-
-// This module is designed to provide a uniform method of sending commands to
-// the board through command packets. The difficulty is, some commands take
-// parameters, others do not. Furthermore, it is often useful to send several
-// commands to the same channel as part of the same packet. (See also i2pack.h.)
-//
-// This module is designed so that the caller should not be responsible for
-// remembering the exact syntax of each command, or at least so that the
-// compiler could check things somewhat. I'll explain as we go...
-//
-// First, a structure which can embody the syntax of each type of command.
-//
-typedef struct _cmdSyntax
-{
-	UCHAR length;   // Number of bytes in the command
-	UCHAR flags;    // Information about the command (see below)
-
-	// The command and its parameters, which may be of arbitrary length. Don't
-	// worry yet how the parameters will be initialized; macros later take care
-	// of it. Also, don't worry about the arbitrary length issue; this structure
-	// is never used to allocate space (see i2cmd.c).
-	UCHAR cmd[2];
-} cmdSyntax, *cmdSyntaxPtr;
-
-// Bit assignments for flags
-
-#define INL 1           // Set if suitable for inline commands
-#define BYP 2           // Set if suitable for bypass commands
-#define BTH (INL|BYP)   // suitable for either!
-#define END 4           // Set if this must be the last command in a block
-#define VIP 8           // Set if this command is special in some way and really
-						// should only be sent from the library-level and not
-						// directly from user-level
-#define VAR 0x10        // This command is of variable length!
-
-// Declarations for the global arrays used to bear the commands and their
-// arguments.
-//
-// Note: Since these are globals and the arguments might change, it is important
-// that the library routine COPY these into buffers from whence they would be
-// sent, rather than merely storing the pointers. In multi-threaded
-// environments, important that the copy should obtain before any context switch
-// is allowed. Also, for parameterized commands, DO NOT ISSUE THE SAME COMMAND
-// MORE THAN ONCE WITH THE SAME PARAMETERS in the same call.
-//
-static UCHAR ct02[];
-static UCHAR ct03[];
-static UCHAR ct04[];
-static UCHAR ct05[];
-static UCHAR ct06[];
-static UCHAR ct07[];
-static UCHAR ct08[];
-static UCHAR ct09[];
-static UCHAR ct10[];
-static UCHAR ct11[];
-static UCHAR ct12[];
-static UCHAR ct13[];
-static UCHAR ct14[];
-static UCHAR ct15[];
-static UCHAR ct16[];
-static UCHAR ct17[];
-static UCHAR ct18[];
-static UCHAR ct19[];
-static UCHAR ct20[];
-static UCHAR ct21[];
-static UCHAR ct22[];
-static UCHAR ct23[];
-static UCHAR ct24[];
-static UCHAR ct25[];
-static UCHAR ct26[];
-static UCHAR ct27[];
-static UCHAR ct28[];
-static UCHAR ct29[];
-static UCHAR ct30[];
-static UCHAR ct31[];
-static UCHAR ct32[];
-static UCHAR ct33[];
-static UCHAR ct34[];
-static UCHAR ct35[];
-static UCHAR ct36[];
-static UCHAR ct36a[];
-static UCHAR ct41[];
-static UCHAR ct42[];
-static UCHAR ct43[];
-static UCHAR ct44[];
-static UCHAR ct45[];
-static UCHAR ct46[];
-static UCHAR ct48[];
-static UCHAR ct49[];
-static UCHAR ct50[];
-static UCHAR ct51[];
-static UCHAR ct52[];
-static UCHAR ct56[];
-static UCHAR ct57[];
-static UCHAR ct58[];
-static UCHAR ct59[];
-static UCHAR ct60[];
-static UCHAR ct61[];
-static UCHAR ct62[];
-static UCHAR ct63[];
-static UCHAR ct64[];
-static UCHAR ct65[];
-static UCHAR ct66[];
-static UCHAR ct67[];
-static UCHAR ct68[];
-static UCHAR ct69[];
-static UCHAR ct70[];
-static UCHAR ct71[];
-static UCHAR ct72[];
-static UCHAR ct73[];
-static UCHAR ct74[];
-static UCHAR ct75[];
-static UCHAR ct76[];
-static UCHAR ct77[];
-static UCHAR ct78[];
-static UCHAR ct79[];
-static UCHAR ct80[];
-static UCHAR ct81[];
-static UCHAR ct82[];
-static UCHAR ct83[];
-static UCHAR ct84[];
-static UCHAR ct85[];
-static UCHAR ct86[];
-static UCHAR ct87[];
-static UCHAR ct88[];
-static UCHAR ct89[];
-static UCHAR ct90[];
-static UCHAR ct91[];
-static UCHAR cc01[];
-static UCHAR cc02[];
-
-// Now, refer to i2cmd.c, and see the character arrays defined there. They are
-// cast here to cmdSyntaxPtr.
-//
-// There are library functions for issuing bypass or inline commands. These
-// functions take one or more arguments of the type cmdSyntaxPtr. The routine
-// then can figure out how long each command is supposed to be and easily add it
-// to the list.
-//
-// For ease of use, we define manifests which return pointers to appropriate
-// cmdSyntaxPtr things. But some commands also take arguments. If a single
-// argument is used, we define a macro which performs the single assignment and
-// (through the expedient of a comma expression) references the appropriate
-// pointer. For commands requiring several arguments, we actually define a
-// function to perform the assignments.
-
-#define CMD_DTRUP	(cmdSyntaxPtr)(ct02)	// Raise DTR
-#define CMD_DTRDN	(cmdSyntaxPtr)(ct03)	// Lower DTR
-#define CMD_RTSUP	(cmdSyntaxPtr)(ct04)	// Raise RTS
-#define CMD_RTSDN	(cmdSyntaxPtr)(ct05)	// Lower RTS
-#define CMD_STARTFL	(cmdSyntaxPtr)(ct06)	// Start Flushing Data
-
-#define CMD_DTRRTS_UP (cmdSyntaxPtr)(cc01)	// Raise DTR and RTS
-#define CMD_DTRRTS_DN (cmdSyntaxPtr)(cc02)	// Lower DTR and RTS
-
-// Set Baud Rate for transmit and receive
-#define CMD_SETBAUD(arg) \
-	(((cmdSyntaxPtr)(ct07))->cmd[1] = (arg),(cmdSyntaxPtr)(ct07))
-
-#define CBR_50       1
-#define CBR_75       2
-#define CBR_110      3
-#define CBR_134      4
-#define CBR_150      5
-#define CBR_200      6
-#define CBR_300      7
-#define CBR_600      8
-#define CBR_1200     9
-#define CBR_1800     10
-#define CBR_2400     11
-#define CBR_4800     12
-#define CBR_9600     13
-#define CBR_19200    14
-#define CBR_38400    15
-#define CBR_2000     16
-#define CBR_3600     17
-#define CBR_7200     18
-#define CBR_56000    19
-#define CBR_57600    20
-#define CBR_64000    21
-#define CBR_76800    22
-#define CBR_115200   23
-#define CBR_C1       24    // Custom baud rate 1
-#define CBR_C2       25    // Custom baud rate 2
-#define CBR_153600   26
-#define CBR_230400   27
-#define CBR_307200   28
-#define CBR_460800   29
-#define CBR_921600   30
-
-// Set Character size
-//
-#define CMD_SETBITS(arg) \
-	(((cmdSyntaxPtr)(ct08))->cmd[1] = (arg),(cmdSyntaxPtr)(ct08))
-
-#define CSZ_5  0
-#define CSZ_6  1
-#define CSZ_7  2
-#define CSZ_8  3
-
-// Set number of stop bits
-//
-#define CMD_SETSTOP(arg) \
-	(((cmdSyntaxPtr)(ct09))->cmd[1] = (arg),(cmdSyntaxPtr)(ct09))
-
-#define CST_1  0
-#define CST_15 1  // 1.5 stop bits
-#define CST_2  2
-
-// Set parity option
-//
-#define CMD_SETPAR(arg) \
-	(((cmdSyntaxPtr)(ct10))->cmd[1] = (arg),(cmdSyntaxPtr)(ct10))
-
-#define CSP_NP 0  // no parity
-#define CSP_OD 1  // odd parity
-#define CSP_EV 2  // Even parity
-#define CSP_SP 3  // Space parity
-#define CSP_MK 4  // Mark parity
-
-// Define xon char for transmitter flow control
-//
-#define CMD_DEF_IXON(arg) \
-	(((cmdSyntaxPtr)(ct11))->cmd[1] = (arg),(cmdSyntaxPtr)(ct11))
-
-// Define xoff char for transmitter flow control
-//
-#define CMD_DEF_IXOFF(arg) \
-	(((cmdSyntaxPtr)(ct12))->cmd[1] = (arg),(cmdSyntaxPtr)(ct12))
-
-#define CMD_STOPFL   (cmdSyntaxPtr)(ct13) // Stop Flushing data
-
-// Acknowledge receipt of hotkey signal
-//
-#define CMD_HOTACK   (cmdSyntaxPtr)(ct14)
-
-// Define irq level to use. Should actually be sent by library-level code, not
-// directly from user...
-//
-#define CMDVALUE_IRQ 15 // For library use at initialization. Until this command
-						// is sent, board processing doesn't really start.
-#define CMD_SET_IRQ(arg) \
-	(((cmdSyntaxPtr)(ct15))->cmd[1] = (arg),(cmdSyntaxPtr)(ct15))
-
-#define CIR_POLL  0  // No IRQ - Poll
-#define CIR_3     3  // IRQ 3
-#define CIR_4     4  // IRQ 4
-#define CIR_5     5  // IRQ 5
-#define CIR_7     7  // IRQ 7
-#define CIR_10    10 // IRQ 10
-#define CIR_11    11 // IRQ 11
-#define CIR_12    12 // IRQ 12
-#define CIR_15    15 // IRQ 15
-
-// Select transmit flow xon/xoff options
-//
-#define CMD_IXON_OPT(arg) \
-	(((cmdSyntaxPtr)(ct16))->cmd[1] = (arg),(cmdSyntaxPtr)(ct16))
-
-#define CIX_NONE  0  // Incoming Xon/Xoff characters not special
-#define CIX_XON   1  // Xoff disable, Xon enable
-#define CIX_XANY  2  // Xoff disable, any key enable
-
-// Select receive flow xon/xoff options
-//
-#define CMD_OXON_OPT(arg) \
-	(((cmdSyntaxPtr)(ct17))->cmd[1] = (arg),(cmdSyntaxPtr)(ct17))
-
-#define COX_NONE  0  // Don't send Xon/Xoff
-#define COX_XON   1  // Send xon/xoff to start/stop incoming data
-
-
-#define CMD_CTS_REP  (cmdSyntaxPtr)(ct18) // Enable  CTS reporting
-#define CMD_CTS_NREP (cmdSyntaxPtr)(ct19) // Disable CTS reporting
-
-#define CMD_DCD_REP  (cmdSyntaxPtr)(ct20) // Enable  DCD reporting
-#define CMD_DCD_NREP (cmdSyntaxPtr)(ct21) // Disable DCD reporting
-
-#define CMD_DSR_REP  (cmdSyntaxPtr)(ct22) // Enable  DSR reporting
-#define CMD_DSR_NREP (cmdSyntaxPtr)(ct23) // Disable DSR reporting
-
-#define CMD_RI_REP   (cmdSyntaxPtr)(ct24) // Enable  RI  reporting
-#define CMD_RI_NREP  (cmdSyntaxPtr)(ct25) // Disable RI  reporting
-
-// Enable break reporting and select style
-//
-#define CMD_BRK_REP(arg) \
-	(((cmdSyntaxPtr)(ct26))->cmd[1] = (arg),(cmdSyntaxPtr)(ct26))
-
-#define CBK_STAT     0x00  // Report breaks as a status (exception,irq)
-#define CBK_NULL     0x01  // Report breaks as a good null
-#define CBK_STAT_SEQ 0x02  // Report breaks as a status AND as in-band character
-                           //  sequence FFh, 01h, 10h
-#define CBK_SEQ      0x03  // Report breaks as the in-band 
-						   //sequence FFh, 01h, 10h ONLY.
-#define CBK_FLSH     0x04  // if this bit set also flush input data
-#define CBK_POSIX    0x08  // if this bit set report as FF,0,0 sequence
-#define CBK_SINGLE   0x10  // if this bit set with CBK_SEQ or CBK_STAT_SEQ
-						   //then reports single null instead of triple
-
-#define CMD_BRK_NREP (cmdSyntaxPtr)(ct27) // Disable break reporting
-
-// Specify maximum block size for received data
-//
-#define CMD_MAX_BLOCK(arg) \
-	(((cmdSyntaxPtr)(ct28))->cmd[1] = (arg),(cmdSyntaxPtr)(ct28))
-
-// -- COMMAND 29 is reserved --
-
-#define CMD_CTSFL_ENAB  (cmdSyntaxPtr)(ct30) // Enable  CTS flow control
-#define CMD_CTSFL_DSAB  (cmdSyntaxPtr)(ct31) // Disable CTS flow control
-#define CMD_RTSFL_ENAB  (cmdSyntaxPtr)(ct32) // Enable  RTS flow control
-#define CMD_RTSFL_DSAB  (cmdSyntaxPtr)(ct33) // Disable RTS flow control
-
-// Specify istrip option
-//
-#define CMD_ISTRIP_OPT(arg) \
-	(((cmdSyntaxPtr)(ct34))->cmd[1] = (arg),(cmdSyntaxPtr)(ct34))
-
-#define CIS_NOSTRIP  0  // Strip characters to character size
-#define CIS_STRIP    1  // Strip any 8-bit characters to 7 bits
-
-// Send a break of arg milliseconds
-//
-#define CMD_SEND_BRK(arg) \
-	(((cmdSyntaxPtr)(ct35))->cmd[1] = (arg),(cmdSyntaxPtr)(ct35))
-
-// Set error reporting mode
-//
-#define CMD_SET_ERROR(arg) \
-	(((cmdSyntaxPtr)(ct36))->cmd[1] = (arg),(cmdSyntaxPtr)(ct36))
-
-#define CSE_ESTAT 0  // Report error in a status packet
-#define CSE_NOREP 1  // Treat character as though it were good
-#define CSE_DROP  2  // Discard the character
-#define CSE_NULL  3  // Replace with a null
-#define CSE_MARK  4  // Replace with a 3-character sequence (as Unix)
-
-#define CSE_REPLACE  0x8	// Replace the errored character with the
-							// replacement character defined here
-
-#define CSE_STAT_REPLACE   0x18	// Replace the errored character with the
-								// replacement character defined here AND
-								// report the error as a status packet (as in
-								// CSE_ESTAT).
-
-
-// COMMAND 37, to send flow control packets, is handled only by low-level
-// library code in response to data movement and shouldn't ever be sent by the
-// user code. See i2pack.h and the body of i2lib.c for details.
-
-// Enable on-board post-processing, using options given in oflag argument.
-// Formerly, this command was automatically preceded by a CMD_OPOST_OFF command
-// because the loadware does not permit sending back-to-back CMD_OPOST_ON
-// commands without an intervening CMD_OPOST_OFF. BUT, WE LEARN 18 MAY 92, that
-// CMD_OPOST_ON and CMD_OPOST_OFF must each be at the end of a packet (or in a
-// solo packet). This means the caller must specify separately CMD_OPOST_OFF,
-// CMD_OPOST_ON(parm) when he calls i2QueueCommands(). That function will ensure
-// each gets a separate packet. Extra CMD_OPOST_OFF's are always ok.
-//
-#define CMD_OPOST_ON(oflag)   \
-	(*(USHORT *)(((cmdSyntaxPtr)(ct39))->cmd[1]) = (oflag), \
-		(cmdSyntaxPtr)(ct39))
-
-#define CMD_OPOST_OFF   (cmdSyntaxPtr)(ct40) // Disable on-board post-proc
-
-#define CMD_RESUME   (cmdSyntaxPtr)(ct41)	// Resume: behave as though an XON
-											// were received;
-
-// Set Transmit baud rate (see command 7 for arguments)
-//
-#define CMD_SETBAUD_TX(arg) \
-	(((cmdSyntaxPtr)(ct42))->cmd[1] = (arg),(cmdSyntaxPtr)(ct42))
-
-// Set Receive baud rate (see command 7 for arguments)
-//
-#define CMD_SETBAUD_RX(arg) \
-	(((cmdSyntaxPtr)(ct43))->cmd[1] = (arg),(cmdSyntaxPtr)(ct43))
-
-// Request interrupt from board each arg milliseconds. Interrupt will specify
-// "received data", even though there may be no data present. If arg == 0,
-// disables any such interrupts.
-//
-#define CMD_PING_REQ(arg) \
-	(((cmdSyntaxPtr)(ct44))->cmd[1] = (arg),(cmdSyntaxPtr)(ct44))
-
-#define CMD_HOT_ENAB (cmdSyntaxPtr)(ct45) // Enable Hot-key checking
-#define CMD_HOT_DSAB (cmdSyntaxPtr)(ct46) // Disable Hot-key checking
-
-#if 0
-// COMMAND 47: Send Protocol info via Unix flags:
-// iflag = Unix tty t_iflag
-// cflag = Unix tty t_cflag
-// lflag = Unix tty t_lflag
-// See System V Unix/Xenix documentation for the meanings of the bit fields
-// within these flags
-//
-#define CMD_UNIX_FLAGS(iflag,cflag,lflag) i2cmdUnixFlags(iflag,cflag,lflag)
-#endif  /*  0  */
-
-#define CMD_DSRFL_ENAB  (cmdSyntaxPtr)(ct48) // Enable  DSR receiver ctrl
-#define CMD_DSRFL_DSAB  (cmdSyntaxPtr)(ct49) // Disable DSR receiver ctrl
-#define CMD_DTRFL_ENAB  (cmdSyntaxPtr)(ct50) // Enable  DTR flow control
-#define CMD_DTRFL_DSAB  (cmdSyntaxPtr)(ct51) // Disable DTR flow control
-#define CMD_BAUD_RESET  (cmdSyntaxPtr)(ct52) // Reset baudrate table
-
-// COMMAND 54: Define custom rate #1
-// rate = (short) 1/10 of the desired baud rate
-//
-#define CMD_BAUD_DEF1(rate) i2cmdBaudDef(1,rate)
-
-// COMMAND 55: Define custom rate #2
-// rate = (short) 1/10 of the desired baud rate
-//
-#define CMD_BAUD_DEF2(rate) i2cmdBaudDef(2,rate)
-
-// Pause arg hundredths of seconds. (Note, this is NOT milliseconds.)
-//
-#define CMD_PAUSE(arg) \
-	(((cmdSyntaxPtr)(ct56))->cmd[1] = (arg),(cmdSyntaxPtr)(ct56))
-
-#define CMD_SUSPEND     (cmdSyntaxPtr)(ct57) // Suspend output
-#define CMD_UNSUSPEND   (cmdSyntaxPtr)(ct58) // Un-Suspend output
-
-// Set parity-checking options
-//
-#define CMD_PARCHK(arg) \
-	(((cmdSyntaxPtr)(ct59))->cmd[1] = (arg),(cmdSyntaxPtr)(ct59))
-
-#define CPK_ENAB  0     // Enable parity checking on input
-#define CPK_DSAB  1     // Disable parity checking on input
-
-#define CMD_BMARK_REQ   (cmdSyntaxPtr)(ct60) // Bookmark request
-
-
-// Enable/Disable internal loopback mode
-//
-#define CMD_INLOOP(arg) \
-	(((cmdSyntaxPtr)(ct61))->cmd[1] = (arg),(cmdSyntaxPtr)(ct61))
-
-#define CIN_DISABLE  0  // Normal operation (default)
-#define CIN_ENABLE   1  // Internal (local) loopback
-#define CIN_REMOTE   2  // Remote loopback
-
-// Specify timeout for hotkeys: Delay will be (arg x 10) milliseconds, arg == 0
-// --> no timeout: wait forever.
-//
-#define CMD_HOT_TIME(arg) \
-	(((cmdSyntaxPtr)(ct62))->cmd[1] = (arg),(cmdSyntaxPtr)(ct62))
-
-
-// Define (outgoing) xon for receive flow control
-//
-#define CMD_DEF_OXON(arg) \
-	(((cmdSyntaxPtr)(ct63))->cmd[1] = (arg),(cmdSyntaxPtr)(ct63))
-
-// Define (outgoing) xoff for receiver flow control
-//
-#define CMD_DEF_OXOFF(arg) \
-	(((cmdSyntaxPtr)(ct64))->cmd[1] = (arg),(cmdSyntaxPtr)(ct64))
-
-// Enable/Disable RTS on transmit (1/2 duplex-style)
-//
-#define CMD_RTS_XMIT(arg) \
-	(((cmdSyntaxPtr)(ct65))->cmd[1] = (arg),(cmdSyntaxPtr)(ct65))
-
-#define CHD_DISABLE  0
-#define CHD_ENABLE   1
-
-// Set high-water-mark level (debugging use only)
-//
-#define CMD_SETHIGHWAT(arg) \
-	(((cmdSyntaxPtr)(ct66))->cmd[1] = (arg),(cmdSyntaxPtr)(ct66))
-
-// Start flushing tagged data (tag = 0-14)
-//
-#define CMD_START_SELFL(tag) \
-	(((cmdSyntaxPtr)(ct67))->cmd[1] = (tag),(cmdSyntaxPtr)(ct67))
-
-// End flushing tagged data (tag = 0-14)
-//
-#define CMD_END_SELFL(tag) \
-	(((cmdSyntaxPtr)(ct68))->cmd[1] = (tag),(cmdSyntaxPtr)(ct68))
-
-#define CMD_HWFLOW_OFF  (cmdSyntaxPtr)(ct69) // Disable HW TX flow control
-#define CMD_ODSRFL_ENAB (cmdSyntaxPtr)(ct70) // Enable DSR output f/c
-#define CMD_ODSRFL_DSAB (cmdSyntaxPtr)(ct71) // Disable DSR output f/c
-#define CMD_ODCDFL_ENAB (cmdSyntaxPtr)(ct72) // Enable DCD output f/c
-#define CMD_ODCDFL_DSAB (cmdSyntaxPtr)(ct73) // Disable DCD output f/c
-
-// Set transmit interrupt load level. Count should be an even value 2-12
-//
-#define CMD_LOADLEVEL(count) \
-	(((cmdSyntaxPtr)(ct74))->cmd[1] = (count),(cmdSyntaxPtr)(ct74))
-
-// If reporting DSS changes, map to character sequence FFh, 2, MSR
-//
-#define CMD_STATDATA(arg) \
-	(((cmdSyntaxPtr)(ct75))->cmd[1] = (arg),(cmdSyntaxPtr)(ct75))
-
-#define CSTD_DISABLE// Report DSS changes as status packets only (default)
-#define CSTD_ENABLE	// Report DSS changes as in-band data sequence as well as
-					// by status packet.
-
-#define CMD_BREAK_ON    (cmdSyntaxPtr)(ct76)// Set break and stop xmit
-#define CMD_BREAK_OFF   (cmdSyntaxPtr)(ct77)// End break and restart xmit
-#define CMD_GETFC       (cmdSyntaxPtr)(ct78)// Request for flow control packet
-											// from board.
-
-// Transmit this character immediately
-//
-#define CMD_XMIT_NOW(ch) \
-	(((cmdSyntaxPtr)(ct79))->cmd[1] = (ch),(cmdSyntaxPtr)(ct79))
-
-// Set baud rate via "divisor latch"
-//
-#define CMD_DIVISOR_LATCH(which,value) \
-			(((cmdSyntaxPtr)(ct80))->cmd[1] = (which), \
-			*(USHORT *)(((cmdSyntaxPtr)(ct80))->cmd[2]) = (value), \
-			(cmdSyntaxPtr)(ct80))
-
-#define CDL_RX 1	// Set receiver rate
-#define CDL_TX 2	// Set transmit rate
-					// (CDL_TX | CDL_RX) Set both rates
-
-// Request for special diagnostic status pkt from the board.
-//
-#define CMD_GET_STATUS (cmdSyntaxPtr)(ct81)
-
-// Request time-stamped transmit character count packet.
-//
-#define CMD_GET_TXCNT  (cmdSyntaxPtr)(ct82)
-
-// Request time-stamped receive character count packet.
-//
-#define CMD_GET_RXCNT  (cmdSyntaxPtr)(ct83)
-
-// Request for box/board I.D. packet.
-#define CMD_GET_BOXIDS (cmdSyntaxPtr)(ct84)
-
-// Enable or disable multiple channels according to bit-mapped ushorts box 1-4
-//
-#define CMD_ENAB_MULT(enable, box1, box2, box3, box4)    \
-			(((cmdSytaxPtr)(ct85))->cmd[1] = (enable),            \
-			*(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[2]) = (box1), \
-			*(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[4]) = (box2), \
-			*(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[6]) = (box3), \
-			*(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[8]) = (box4), \
-			(cmdSyntaxPtr)(ct85))
-
-#define CEM_DISABLE  0
-#define CEM_ENABLE   1
-
-// Enable or disable receiver or receiver interrupts (default both enabled)
-//
-#define CMD_RCV_ENABLE(ch) \
-	(((cmdSyntaxPtr)(ct86))->cmd[1] = (ch),(cmdSyntaxPtr)(ct86))
-
-#define CRE_OFF      0  // Disable the receiver
-#define CRE_ON       1  // Enable the receiver
-#define CRE_INTOFF   2  // Disable receiver interrupts (to loadware)
-#define CRE_INTON    3  // Enable receiver interrupts (to loadware)
-
-// Starts up a hardware test process, which runs transparently, and sends a
-// STAT_HWFAIL packet in case a hardware failure is detected.
-//
-#define CMD_HW_TEST  (cmdSyntaxPtr)(ct87)
-
-// Change receiver threshold and timeout value:
-// Defaults: timeout = 20mS
-// threshold count = 8 when DTRflow not in use,
-// threshold count = 5 when DTRflow in use.
-//
-#define CMD_RCV_THRESHOLD(count,ms) \
-			(((cmdSyntaxPtr)(ct88))->cmd[1] = (count), \
-			((cmdSyntaxPtr)(ct88))->cmd[2] = (ms), \
-			(cmdSyntaxPtr)(ct88))
-
-// Makes the loadware report DSS signals for this channel immediately.
-//
-#define CMD_DSS_NOW (cmdSyntaxPtr)(ct89)
-	
-// Set the receive silo parameters 
-// 	timeout is ms idle wait until delivery       (~VTIME)
-// 	threshold is max characters cause interrupt  (~VMIN)
-//
-#define CMD_SET_SILO(timeout,threshold) \
-			(((cmdSyntaxPtr)(ct90))->cmd[1] = (timeout), \
-			((cmdSyntaxPtr)(ct90))->cmd[2]  = (threshold), \
-			(cmdSyntaxPtr)(ct90))
-
-// Set timed break in decisecond (1/10s)
-//
-#define CMD_LBREAK(ds) \
-	(((cmdSyntaxPtr)(ct91))->cmd[1] = (ds),(cmdSyntaxPtr)(ct66))
-
-
-
-#endif // I2CMD_H
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
deleted file mode 100644
index 29db44d..0000000
--- a/drivers/char/ip2/i2ellis.c
+++ /dev/null
@@ -1,1403 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Low-level interface code for the device driver
-*                (This is included source code, not a separate compilation
-*                module.)
-*
-*******************************************************************************/
-//---------------------------------------------
-// Function declarations private to this module
-//---------------------------------------------
-// Functions called only indirectly through i2eBordStr entries.
-
-static int iiWriteBuf16(i2eBordStrPtr, unsigned char *, int);
-static int iiWriteBuf8(i2eBordStrPtr, unsigned char *, int);
-static int iiReadBuf16(i2eBordStrPtr, unsigned char *, int);
-static int iiReadBuf8(i2eBordStrPtr, unsigned char *, int);
-
-static unsigned short iiReadWord16(i2eBordStrPtr);
-static unsigned short iiReadWord8(i2eBordStrPtr);
-static void iiWriteWord16(i2eBordStrPtr, unsigned short);
-static void iiWriteWord8(i2eBordStrPtr, unsigned short);
-
-static int iiWaitForTxEmptyII(i2eBordStrPtr, int);
-static int iiWaitForTxEmptyIIEX(i2eBordStrPtr, int);
-static int iiTxMailEmptyII(i2eBordStrPtr);
-static int iiTxMailEmptyIIEX(i2eBordStrPtr);
-static int iiTrySendMailII(i2eBordStrPtr, unsigned char);
-static int iiTrySendMailIIEX(i2eBordStrPtr, unsigned char);
-
-static unsigned short iiGetMailII(i2eBordStrPtr);
-static unsigned short iiGetMailIIEX(i2eBordStrPtr);
-
-static void iiEnableMailIrqII(i2eBordStrPtr);
-static void iiEnableMailIrqIIEX(i2eBordStrPtr);
-static void iiWriteMaskII(i2eBordStrPtr, unsigned char);
-static void iiWriteMaskIIEX(i2eBordStrPtr, unsigned char);
-
-static void ii2Nop(void);
-
-//***************
-//* Static Data *
-//***************
-
-static int ii2Safe;         // Safe I/O address for delay routine
-
-static int iiDelayed;	// Set when the iiResetDelay function is
-							// called. Cleared when ANY board is reset.
-static DEFINE_RWLOCK(Dl_spinlock);
-
-//********
-//* Code *
-//********
-
-//=======================================================
-// Initialization Routines
-//
-// iiSetAddress
-// iiReset
-// iiResetDelay
-// iiInitialize
-//=======================================================
-
-//******************************************************************************
-// Function:   iiSetAddress(pB, address, delay)
-// Parameters: pB      - pointer to the board structure
-//             address - the purported I/O address of the board
-//             delay   - pointer to the 1-ms delay function to use
-//                       in this and any future operations to this board
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// This routine (roughly) checks for address validity, sets the i2eValid OK and
-// sets the state to II_STATE_COLD which means that we haven't even sent a reset
-// yet.
-//
-//******************************************************************************
-static int
-iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
-{
-	// Should any failure occur before init is finished...
-	pB->i2eValid = I2E_INCOMPLETE;
-
-	// Cannot check upper limit except extremely: Might be microchannel
-	// Address must be on an 8-byte boundary
-
-	if ((unsigned int)address <= 0x100
-		|| (unsigned int)address >= 0xfff8
-		|| (address & 0x7)
-		)
-	{
-		I2_COMPLETE(pB, I2EE_BADADDR);
-	}
-
-	// Initialize accelerators
-	pB->i2eBase    = address;
-	pB->i2eData    = address + FIFO_DATA;
-	pB->i2eStatus  = address + FIFO_STATUS;
-	pB->i2ePointer = address + FIFO_PTR;
-	pB->i2eXMail   = address + FIFO_MAIL;
-	pB->i2eXMask   = address + FIFO_MASK;
-
-	// Initialize i/o address for ii2DelayIO
-	ii2Safe = address + FIFO_NOP;
-
-	// Initialize the delay routine
-	pB->i2eDelay = ((delay != (delayFunc_t)NULL) ? delay : (delayFunc_t)ii2Nop);
-
-	pB->i2eValid = I2E_MAGIC;
-	pB->i2eState = II_STATE_COLD;
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiReset(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Attempts to reset the board (see also i2hw.h). Normally, we would use this to
-// reset a board immediately after iiSetAddress(), but it is valid to reset a
-// board from any state, say, in order to change or re-load loadware. (Under
-// such circumstances, no reason to re-run iiSetAddress(), which is why it is a
-// separate routine and not included in this routine.
-//
-//******************************************************************************
-static int
-iiReset(i2eBordStrPtr pB)
-{
-	// Magic number should be set, else even the address is suspect
-	if (pB->i2eValid != I2E_MAGIC)
-	{
-		I2_COMPLETE(pB, I2EE_BADMAGIC);
-	}
-
-	outb(0, pB->i2eBase + FIFO_RESET);  /* Any data will do */
-	iiDelay(pB, 50);                    // Pause between resets
-	outb(0, pB->i2eBase + FIFO_RESET);  /* Second reset */
-
-	// We must wait before even attempting to read anything from the FIFO: the
-	// board's P.O.S.T may actually attempt to read and write its end of the
-	// FIFO in order to check flags, loop back (where supported), etc. On
-	// completion of this testing it would reset the FIFO, and on completion
-	// of all // P.O.S.T., write the message. We must not mistake data which
-	// might have been sent for testing as part of the reset message. To
-	// better utilize time, say, when resetting several boards, we allow the
-	// delay to be performed externally; in this way the caller can reset 
-	// several boards, delay a single time, then call the initialization
-	// routine for all.
-
-	pB->i2eState = II_STATE_RESET;
-
-	iiDelayed = 0;	// i.e., the delay routine hasn't been called since the most
-					// recent reset.
-
-	// Ensure anything which would have been of use to standard loadware is
-	// blanked out, since board has now forgotten everything!.
-
-	pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */
-	pB->i2eWaitingForEmptyFifo = 0;
-	pB->i2eOutMailWaiting = 0;
-	pB->i2eChannelPtr = NULL;
-	pB->i2eChannelCnt = 0;
-
-	pB->i2eLeadoffWord[0] = 0;
-	pB->i2eFifoInInts = 0;
-	pB->i2eFifoOutInts = 0;
-	pB->i2eFatalTrap = NULL;
-	pB->i2eFatal = 0;
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiResetDelay(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Using the delay defined in board structure, waits two seconds (for board to
-// reset).
-//
-//******************************************************************************
-static int
-iiResetDelay(i2eBordStrPtr pB)
-{
-	if (pB->i2eValid != I2E_MAGIC) {
-		I2_COMPLETE(pB, I2EE_BADMAGIC);
-	}
-	if (pB->i2eState != II_STATE_RESET) {
-		I2_COMPLETE(pB, I2EE_BADSTATE);
-	}
-	iiDelay(pB,2000);       /* Now we wait for two seconds. */
-	iiDelayed = 1;          /* Delay has been called: ok to initialize */
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiInitialize(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Attempts to read the Power-on reset message. Initializes any remaining fields
-// in the pB structure.
-//
-// This should be called as the third step of a process beginning with
-// iiReset(), then iiResetDelay(). This routine checks to see that the structure
-// is "valid" and in the reset state, also confirms that the delay routine has
-// been called since the latest reset (to any board! overly strong!).
-//
-//******************************************************************************
-static int
-iiInitialize(i2eBordStrPtr pB)
-{
-	int itemp;
-	unsigned char c;
-	unsigned short utemp;
-	unsigned int ilimit;
-
-	if (pB->i2eValid != I2E_MAGIC)
-	{
-		I2_COMPLETE(pB, I2EE_BADMAGIC);
-	}
-
-	if (pB->i2eState != II_STATE_RESET || !iiDelayed)
-	{
-		I2_COMPLETE(pB, I2EE_BADSTATE);
-	}
-
-	// In case there is a failure short of our completely reading the power-up
-	// message.
-	pB->i2eValid = I2E_INCOMPLETE;
-
-
-	// Now attempt to read the message.
-
-	for (itemp = 0; itemp < sizeof(porStr); itemp++)
-	{
-		// We expect the entire message is ready.
-		if (!I2_HAS_INPUT(pB)) {
-			pB->i2ePomSize = itemp;
-			I2_COMPLETE(pB, I2EE_PORM_SHORT);
-		}
-
-		pB->i2ePom.c[itemp] = c = inb(pB->i2eData);
-
-		// We check the magic numbers as soon as they are supposed to be read
-		// (rather than after) to minimize effect of reading something we
-		// already suspect can't be "us".
-		if (  (itemp == POR_1_INDEX && c != POR_MAGIC_1) ||
-				(itemp == POR_2_INDEX && c != POR_MAGIC_2))
-		{
-			pB->i2ePomSize = itemp+1;
-			I2_COMPLETE(pB, I2EE_BADMAGIC);
-		}
-	}
-
-	pB->i2ePomSize = itemp;
-
-	// Ensure that this was all the data...
-	if (I2_HAS_INPUT(pB))
-		I2_COMPLETE(pB, I2EE_PORM_LONG);
-
-	// For now, we'll fail to initialize if P.O.S.T reports bad chip mapper:
-	// Implying we will not be able to download any code either:  That's ok: the
-	// condition is pretty explicit.
-	if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER)
-	{
-		I2_COMPLETE(pB, I2EE_POSTERR);
-	}
-
-	// Determine anything which must be done differently depending on the family
-	// of boards!
-	switch (pB->i2ePom.e.porID & POR_ID_FAMILY)
-	{
-	case POR_ID_FII:  // IntelliPort-II
-
-		pB->i2eFifoStyle   = FIFO_II;
-		pB->i2eFifoSize    = 512;     // 512 bytes, always
-		pB->i2eDataWidth16 = false;
-
-		pB->i2eMaxIrq = 15;	// Because board cannot tell us it is in an 8-bit
-							// slot, we do allow it to be done (documentation!)
-
-		pB->i2eGoodMap[1] =
-		pB->i2eGoodMap[2] =
-		pB->i2eGoodMap[3] =
-		pB->i2eChannelMap[1] =
-		pB->i2eChannelMap[2] =
-		pB->i2eChannelMap[3] = 0;
-
-		switch (pB->i2ePom.e.porID & POR_ID_SIZE)
-		{
-		case POR_ID_II_4:
-			pB->i2eGoodMap[0] =
-			pB->i2eChannelMap[0] = 0x0f;  // four-port
-
-			// Since porPorts1 is based on the Hardware ID register, the numbers
-			// should always be consistent for IntelliPort-II.  Ditto below...
-			if (pB->i2ePom.e.porPorts1 != 4)
-			{
-				I2_COMPLETE(pB, I2EE_INCONSIST);
-			}
-			break;
-
-		case POR_ID_II_8:
-		case POR_ID_II_8R:
-			pB->i2eGoodMap[0] =
-			pB->i2eChannelMap[0] = 0xff;  // Eight port
-			if (pB->i2ePom.e.porPorts1 != 8)
-			{
-				I2_COMPLETE(pB, I2EE_INCONSIST);
-			}
-			break;
-
-		case POR_ID_II_6:
-			pB->i2eGoodMap[0] =
-			pB->i2eChannelMap[0] = 0x3f;  // Six Port
-			if (pB->i2ePom.e.porPorts1 != 6)
-			{
-				I2_COMPLETE(pB, I2EE_INCONSIST);
-			}
-			break;
-		}
-
-		// Fix up the "good channel list based on any errors reported.
-		if (pB->i2ePom.e.porDiag1 & POR_BAD_UART1)
-		{
-			pB->i2eGoodMap[0] &= ~0x0f;
-		}
-
-		if (pB->i2ePom.e.porDiag1 & POR_BAD_UART2)
-		{
-			pB->i2eGoodMap[0] &= ~0xf0;
-		}
-
-		break;   // POR_ID_FII case
-
-	case POR_ID_FIIEX:   // IntelliPort-IIEX
-
-		pB->i2eFifoStyle = FIFO_IIEX;
-
-		itemp = pB->i2ePom.e.porFifoSize;
-
-		// Implicit assumption that fifo would not grow beyond 32k, 
-		// nor would ever be less than 256.
-
-		if (itemp < 8 || itemp > 15)
-		{
-			I2_COMPLETE(pB, I2EE_INCONSIST);
-		}
-		pB->i2eFifoSize = (1 << itemp);
-
-		// These are based on what P.O.S.T thinks should be there, based on
-		// box ID registers
-		ilimit = pB->i2ePom.e.porNumBoxes;
-		if (ilimit > ABS_MAX_BOXES)
-		{
-			ilimit = ABS_MAX_BOXES;
-		}
-
-		// For as many boxes as EXIST, gives the type of box.
-		// Added 8/6/93: check for the ISA-4 (asic) which looks like an
-		// expandable but for whom "8 or 16?" is not the right question.
-
-		utemp = pB->i2ePom.e.porFlags;
-		if (utemp & POR_CEX4)
-		{
-			pB->i2eChannelMap[0] = 0x000f;
-		} else {
-			utemp &= POR_BOXES;
-			for (itemp = 0; itemp < ilimit; itemp++)
-			{
-				pB->i2eChannelMap[itemp] = 
-					((utemp & POR_BOX_16) ? 0xffff : 0x00ff);
-				utemp >>= 1;
-			}
-		}
-
-		// These are based on what P.O.S.T actually found.
-
-		utemp = (pB->i2ePom.e.porPorts2 << 8) + pB->i2ePom.e.porPorts1;
-
-		for (itemp = 0; itemp < ilimit; itemp++)
-		{
-			pB->i2eGoodMap[itemp] = 0;
-			if (utemp & 1) pB->i2eGoodMap[itemp] |= 0x000f;
-			if (utemp & 2) pB->i2eGoodMap[itemp] |= 0x00f0;
-			if (utemp & 4) pB->i2eGoodMap[itemp] |= 0x0f00;
-			if (utemp & 8) pB->i2eGoodMap[itemp] |= 0xf000;
-			utemp >>= 4;
-		}
-
-		// Now determine whether we should transfer in 8 or 16-bit mode.
-		switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) )
-		{
-		case POR_BUS_SLOT16 | POR_BUS_DIP16:
-			pB->i2eDataWidth16 = true;
-			pB->i2eMaxIrq = 15;
-			break;
-
-		case POR_BUS_SLOT16:
-			pB->i2eDataWidth16 = false;
-			pB->i2eMaxIrq = 15;
-			break;
-
-		case 0:
-		case POR_BUS_DIP16:     // In an 8-bit slot, DIP switch don't care.
-		default:
-			pB->i2eDataWidth16 = false;
-			pB->i2eMaxIrq = 7;
-			break;
-		}
-		break;   // POR_ID_FIIEX case
-
-	default:    // Unknown type of board
-		I2_COMPLETE(pB, I2EE_BAD_FAMILY);
-		break;
-	}  // End the switch based on family
-
-	// Temporarily, claim there is no room in the outbound fifo. 
-	// We will maintain this whenever we check for an empty outbound FIFO.
-	pB->i2eFifoRemains = 0;
-
-	// Now, based on the bus type, should we expect to be able to re-configure
-	// interrupts (say, for testing purposes).
-	switch (pB->i2ePom.e.porBus & POR_BUS_TYPE)
-	{
-	case POR_BUS_T_ISA:
-	case POR_BUS_T_UNK:  // If the type of bus is undeclared, assume ok.
-	case POR_BUS_T_MCA:
-	case POR_BUS_T_EISA:
-		break;
-	default:
-		I2_COMPLETE(pB, I2EE_BADBUS);
-	}
-
-	if (pB->i2eDataWidth16)
-	{
-		pB->i2eWriteBuf  = iiWriteBuf16;
-		pB->i2eReadBuf   = iiReadBuf16;
-		pB->i2eWriteWord = iiWriteWord16;
-		pB->i2eReadWord  = iiReadWord16;
-	} else {
-		pB->i2eWriteBuf  = iiWriteBuf8;
-		pB->i2eReadBuf   = iiReadBuf8;
-		pB->i2eWriteWord = iiWriteWord8;
-		pB->i2eReadWord  = iiReadWord8;
-	}
-
-	switch(pB->i2eFifoStyle)
-	{
-	case FIFO_II:
-		pB->i2eWaitForTxEmpty = iiWaitForTxEmptyII;
-		pB->i2eTxMailEmpty    = iiTxMailEmptyII;
-		pB->i2eTrySendMail    = iiTrySendMailII;
-		pB->i2eGetMail        = iiGetMailII;
-		pB->i2eEnableMailIrq  = iiEnableMailIrqII;
-		pB->i2eWriteMask      = iiWriteMaskII;
-
-		break;
-
-	case FIFO_IIEX:
-		pB->i2eWaitForTxEmpty = iiWaitForTxEmptyIIEX;
-		pB->i2eTxMailEmpty    = iiTxMailEmptyIIEX;
-		pB->i2eTrySendMail    = iiTrySendMailIIEX;
-		pB->i2eGetMail        = iiGetMailIIEX;
-		pB->i2eEnableMailIrq  = iiEnableMailIrqIIEX;
-		pB->i2eWriteMask      = iiWriteMaskIIEX;
-
-		break;
-
-	default:
-		I2_COMPLETE(pB, I2EE_INCONSIST);
-	}
-
-	// Initialize state information.
-	pB->i2eState = II_STATE_READY;   // Ready to load loadware.
-
-	// Some Final cleanup:
-	// For some boards, the bootstrap firmware may perform some sort of test
-	// resulting in a stray character pending in the incoming mailbox. If one is
-	// there, it should be read and discarded, especially since for the standard
-	// firmware, it's the mailbox that interrupts the host.
-
-	pB->i2eStartMail = iiGetMail(pB);
-
-	// Throw it away and clear the mailbox structure element
-	pB->i2eStartMail = NO_MAIL_HERE;
-
-	// Everything is ok now, return with good status/
-
-	pB->i2eValid = I2E_MAGIC;
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   ii2DelayTimer(mseconds)
-// Parameters: mseconds - number of milliseconds to delay
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// This routine delays for approximately mseconds milliseconds and is intended
-// to be called indirectly through i2Delay field in i2eBordStr. It uses the
-// Linux timer_list mechanism.
-//
-// The Linux timers use a unit called "jiffies" which are 10mS in the Intel
-// architecture. This function rounds the delay period up to the next "jiffy".
-// In the Alpha architecture the "jiffy" is 1mS, but this driver is not intended
-// for Alpha platforms at this time.
-//
-//******************************************************************************
-static void
-ii2DelayTimer(unsigned int mseconds)
-{
-	msleep_interruptible(mseconds);
-}
-
-#if 0
-//static void ii2DelayIO(unsigned int);
-//******************************************************************************
-// !!! Not Used, this is DOS crap, some of you young folks may be interested in
-//     in how things were done in the stone age of caculating machines       !!!
-// Function:   ii2DelayIO(mseconds)
-// Parameters: mseconds - number of milliseconds to delay
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// This routine delays for approximately mseconds milliseconds and is intended
-// to be called indirectly through i2Delay field in i2eBordStr. It is intended
-// for use where a clock-based function is impossible: for example, DOS drivers.
-//
-// This function uses the IN instruction to place bounds on the timing and
-// assumes that ii2Safe has been set. This is because I/O instructions are not
-// subject to caching and will therefore take a certain minimum time. To ensure
-// the delay is at least long enough on fast machines, it is based on some
-// fastest-case calculations.  On slower machines this may cause VERY long
-// delays. (3 x fastest case). In the fastest case, everything is cached except
-// the I/O instruction itself.
-//
-// Timing calculations:
-// The fastest bus speed for I/O operations is likely to be 10 MHz. The I/O
-// operation in question is a byte operation to an odd address. For 8-bit
-// operations, the architecture generally enforces two wait states. At 10 MHz, a
-// single cycle time is 100nS. A read operation at two wait states takes 6
-// cycles for a total time of 600nS. Therefore approximately 1666 iterations
-// would be required to generate a single millisecond delay. The worst
-// (reasonable) case would be an 8MHz system with no cacheing. In this case, the
-// I/O instruction would take 125nS x 6 cyles = 750 nS. More importantly, code
-// fetch of other instructions in the loop would take time (zero wait states,
-// however) and would be hard to estimate. This is minimized by using in-line
-// assembler for the in inner loop of IN instructions. This consists of just a
-// few bytes. So we'll guess about four code fetches per loop. Each code fetch
-// should take four cycles, so we have 125nS * 8 = 1000nS. Worst case then is
-// that what should have taken 1 mS takes instead 1666 * (1750) = 2.9 mS.
-//
-// So much for theoretical timings: results using 1666 value on some actual
-// machines:
-// IBM      286      6MHz     3.15 mS
-// Zenith   386      33MHz    2.45 mS
-// (brandX) 386      33MHz    1.90 mS  (has cache)
-// (brandY) 486      33MHz    2.35 mS
-// NCR      486      ??       1.65 mS (microchannel)
-//
-// For most machines, it is probably safe to scale this number back (remember,
-// for robust operation use an actual timed delay if possible), so we are using
-// a value of 1190. This yields 1.17 mS for the fastest machine in our sample,
-// 1.75 mS for typical 386 machines, and 2.25 mS the absolute slowest machine.
-//
-// 1/29/93:
-// The above timings are too slow. Actual cycle times might be faster. ISA cycle
-// times could approach 500 nS, and ...
-// The IBM model 77 being microchannel has no wait states for 8-bit reads and
-// seems to be accessing the I/O at 440 nS per access (from start of one to
-// start of next). This would imply we need 1000/.440 = 2272 iterations to
-// guarantee we are fast enough. In actual testing, we see that 2 * 1190 are in
-// fact enough. For diagnostics, we keep the level at 1190, but developers note
-// this needs tuning.
-//
-// Safe assumption:  2270 i/o reads = 1 millisecond
-//
-//******************************************************************************
-
-
-static int ii2DelValue = 1190;  // See timing calculations below
-						// 1666 for fastest theoretical machine
-						// 1190 safe for most fast 386 machines
-						// 1000 for fastest machine tested here
-						//  540 (sic) for AT286/6Mhz
-static void
-ii2DelayIO(unsigned int mseconds)
-{
-	if (!ii2Safe) 
-		return;   /* Do nothing if this variable uninitialized */
-
-	while(mseconds--) {
-		int i = ii2DelValue;
-		while ( i-- ) {
-			inb(ii2Safe);
-		}
-	}
-}
-#endif 
-
-//******************************************************************************
-// Function:   ii2Nop()
-// Parameters: None
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// iiInitialize will set i2eDelay to this if the delay parameter is NULL. This
-// saves checking for a NULL pointer at every call.
-//******************************************************************************
-static void
-ii2Nop(void)
-{
-	return;	// no mystery here
-}
-
-//=======================================================
-// Routines which are available in 8/16-bit versions, or
-// in different fifo styles. These are ALL called
-// indirectly through the board structure.
-//=======================================================
-
-//******************************************************************************
-// Function:   iiWriteBuf16(pB, address, count)
-// Parameters: pB      - pointer to board structure
-//             address - address of data to write
-//             count   - number of data bytes to write
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes 'count' bytes from 'address' to the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// sent (identity unknown...). Uses 16-bit (word) operations. Is called
-// indirectly through pB->i2eWriteBuf.
-//
-//******************************************************************************
-static int
-iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
-{
-	// Rudimentary sanity checking here.
-	if (pB->i2eValid != I2E_MAGIC)
-		I2_COMPLETE(pB, I2EE_INVALID);
-
-	I2_OUTSW(pB->i2eData, address, count);
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiWriteBuf8(pB, address, count)
-// Parameters: pB      - pointer to board structure
-//             address - address of data to write
-//             count   - number of data bytes to write
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes 'count' bytes from 'address' to the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// sent (identity unknown...). This is to be consistent with the 16-bit version.
-// Uses 8-bit (byte) operations. Is called indirectly through pB->i2eWriteBuf.
-//
-//******************************************************************************
-static int
-iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
-{
-	/* Rudimentary sanity checking here */
-	if (pB->i2eValid != I2E_MAGIC)
-		I2_COMPLETE(pB, I2EE_INVALID);
-
-	I2_OUTSB(pB->i2eData, address, count);
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiReadBuf16(pB, address, count)
-// Parameters: pB      - pointer to board structure
-//             address - address to put data read
-//             count   - number of data bytes to read
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Reads 'count' bytes into 'address' from the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// received (identity unknown...). Uses 16-bit (word) operations. Is called
-// indirectly through pB->i2eReadBuf.
-//
-//******************************************************************************
-static int
-iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
-{
-	// Rudimentary sanity checking here.
-	if (pB->i2eValid != I2E_MAGIC)
-		I2_COMPLETE(pB, I2EE_INVALID);
-
-	I2_INSW(pB->i2eData, address, count);
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiReadBuf8(pB, address, count)
-// Parameters: pB      - pointer to board structure
-//             address - address to put data read
-//             count   - number of data bytes to read
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Reads 'count' bytes into 'address' from the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// received (identity unknown...). This to match the 16-bit behaviour. Uses
-// 8-bit (byte) operations. Is called indirectly through pB->i2eReadBuf.
-//
-//******************************************************************************
-static int
-iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
-{
-	// Rudimentary sanity checking here.
-	if (pB->i2eValid != I2E_MAGIC)
-		I2_COMPLETE(pB, I2EE_INVALID);
-
-	I2_INSB(pB->i2eData, address, count);
-
-	I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function:   iiReadWord16(pB)
-// Parameters: pB      - pointer to board structure
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Returns the word read from the data fifo specified by the board-structure
-// pointer pB. Uses a 16-bit operation. Is called indirectly through
-// pB->i2eReadWord.
-//
-//******************************************************************************
-static unsigned short
-iiReadWord16(i2eBordStrPtr pB)
-{
-	return inw(pB->i2eData);
-}
-
-//******************************************************************************
-// Function:   iiReadWord8(pB)
-// Parameters: pB      - pointer to board structure
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Returns the word read from the data fifo specified by the board-structure
-// pointer pB. Uses two 8-bit operations. Bytes are assumed to be LSB first. Is
-// called indirectly through pB->i2eReadWord.
-//
-//******************************************************************************
-static unsigned short
-iiReadWord8(i2eBordStrPtr pB)
-{
-	unsigned short urs;
-
-	urs = inb(pB->i2eData);
-
-	return (inb(pB->i2eData) << 8) | urs;
-}
-
-//******************************************************************************
-// Function:   iiWriteWord16(pB, value)
-// Parameters: pB    - pointer to board structure
-//             value - data to write
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes the word 'value' to the data fifo specified by the board-structure
-// pointer pB. Uses 16-bit operation. Is called indirectly through
-// pB->i2eWriteWord.
-//
-//******************************************************************************
-static void
-iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
-{
-	outw((int)value, pB->i2eData);
-}
-
-//******************************************************************************
-// Function:   iiWriteWord8(pB, value)
-// Parameters: pB    - pointer to board structure
-//             value - data to write
-//
-// Returns:    True if everything appears copacetic.
-//             False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes the word 'value' to the data fifo specified by the board-structure
-// pointer pB. Uses two 8-bit operations (writes LSB first). Is called
-// indirectly through pB->i2eWriteWord.
-//
-//******************************************************************************
-static void
-iiWriteWord8(i2eBordStrPtr pB, unsigned short value)
-{
-	outb((char)value, pB->i2eData);
-	outb((char)(value >> 8), pB->i2eData);
-}
-
-//******************************************************************************
-// Function:   iiWaitForTxEmptyII(pB, mSdelay)
-// Parameters: pB      - pointer to board structure
-//             mSdelay - period to wait before returning
-//
-// Returns:    True if the FIFO is empty.
-//             False if it not empty in the required time: the pB->i2eError
-//             field has the error.
-//
-// Description:
-//
-// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if
-// not empty by the required time, returns false and error in pB->i2eError,
-// otherwise returns true.
-//
-// mSdelay == 0 is taken to mean must be empty on the first test.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-// Note this routine is organized so that if status is ok there is no delay at
-// all called either before or after the test.  Is called indirectly through
-// pB->i2eWaitForTxEmpty.
-//
-//******************************************************************************
-static int
-iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay)
-{
-	unsigned long	flags;
-	int itemp;
-
-	for (;;)
-	{
-		// This routine hinges on being able to see the "other" status register
-		// (as seen by the local processor).  His incoming fifo is our outgoing
-		// FIFO.
-		//
-		// By the nature of this routine, you would be using this as part of a
-		// larger atomic context: i.e., you would use this routine to ensure the
-		// fifo empty, then act on this information. Between these two halves, 
-		// you will generally not want to service interrupts or in any way 
-		// disrupt the assumptions implicit in the larger context.
-		//
-		// Even worse, however, this routine "shifts" the status register to 
-		// point to the local status register which is not the usual situation.
-		// Therefore for extra safety, we force the critical section to be
-		// completely atomic, and pick up after ourselves before allowing any
-		// interrupts of any kind.
-
-
-		write_lock_irqsave(&Dl_spinlock, flags);
-		outb(SEL_COMMAND, pB->i2ePointer);
-		outb(SEL_CMD_SH, pB->i2ePointer);
-
-		itemp = inb(pB->i2eStatus);
-
-		outb(SEL_COMMAND, pB->i2ePointer);
-		outb(SEL_CMD_UNSH, pB->i2ePointer);
-
-		if (itemp & ST_IN_EMPTY)
-		{
-			I2_UPDATE_FIFO_ROOM(pB);
-			write_unlock_irqrestore(&Dl_spinlock, flags);
-			I2_COMPLETE(pB, I2EE_GOOD);
-		}
-
-		write_unlock_irqrestore(&Dl_spinlock, flags);
-
-		if (mSdelay-- == 0)
-			break;
-
-		iiDelay(pB, 1);      /* 1 mS granularity on checking condition */
-	}
-	I2_COMPLETE(pB, I2EE_TXE_TIME);
-}
-
-//******************************************************************************
-// Function:   iiWaitForTxEmptyIIEX(pB, mSdelay)
-// Parameters: pB      - pointer to board structure
-//             mSdelay - period to wait before returning
-//
-// Returns:    True if the FIFO is empty.
-//             False if it not empty in the required time: the pB->i2eError
-//             field has the error.
-//
-// Description:
-//
-// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if
-// not empty by the required time, returns false and error in pB->i2eError,
-// otherwise returns true.
-//
-// mSdelay == 0 is taken to mean must be empty on the first test.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-// Note this routine is organized so that if status is ok there is no delay at
-// all called either before or after the test.  Is called indirectly through
-// pB->i2eWaitForTxEmpty.
-//
-//******************************************************************************
-static int
-iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay)
-{
-	unsigned long	flags;
-
-	for (;;)
-	{
-		// By the nature of this routine, you would be using this as part of a
-		// larger atomic context: i.e., you would use this routine to ensure the
-		// fifo empty, then act on this information. Between these two halves,
-		// you will generally not want to service interrupts or in any way
-		// disrupt the assumptions implicit in the larger context.
-
-		write_lock_irqsave(&Dl_spinlock, flags);
-
-		if (inb(pB->i2eStatus) & STE_OUT_MT) {
-			I2_UPDATE_FIFO_ROOM(pB);
-			write_unlock_irqrestore(&Dl_spinlock, flags);
-			I2_COMPLETE(pB, I2EE_GOOD);
-		}
-		write_unlock_irqrestore(&Dl_spinlock, flags);
-
-		if (mSdelay-- == 0)
-			break;
-
-		iiDelay(pB, 1);      // 1 mS granularity on checking condition
-	}
-	I2_COMPLETE(pB, I2EE_TXE_TIME);
-}
-
-//******************************************************************************
-// Function:   iiTxMailEmptyII(pB)
-// Parameters: pB      - pointer to board structure
-//
-// Returns:    True if the transmit mailbox is empty.
-//             False if it not empty.
-//
-// Description:
-//
-// Returns true or false according to whether the transmit mailbox is empty (and
-// therefore able to accept more mail)
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static int
-iiTxMailEmptyII(i2eBordStrPtr pB)
-{
-	int port = pB->i2ePointer;
-	outb(SEL_OUTMAIL, port);
-	return inb(port) == 0;
-}
-
-//******************************************************************************
-// Function:   iiTxMailEmptyIIEX(pB)
-// Parameters: pB      - pointer to board structure
-//
-// Returns:    True if the transmit mailbox is empty.
-//             False if it not empty.
-//
-// Description:
-//
-// Returns true or false according to whether the transmit mailbox is empty (and
-// therefore able to accept more mail)
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static int
-iiTxMailEmptyIIEX(i2eBordStrPtr pB)
-{
-	return !(inb(pB->i2eStatus) & STE_OUT_MAIL);
-}
-
-//******************************************************************************
-// Function:   iiTrySendMailII(pB,mail)
-// Parameters: pB   - pointer to board structure
-//             mail - value to write to mailbox
-//
-// Returns:    True if the transmit mailbox is empty, and mail is sent.
-//             False if it not empty.
-//
-// Description:
-//
-// If outgoing mailbox is empty, sends mail and returns true. If outgoing
-// mailbox is not empty, returns false.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static int
-iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
-{
-	int port = pB->i2ePointer;
-
-	outb(SEL_OUTMAIL, port);
-	if (inb(port) == 0) {
-		outb(SEL_OUTMAIL, port);
-		outb(mail, port);
-		return 1;
-	}
-	return 0;
-}
-
-//******************************************************************************
-// Function:   iiTrySendMailIIEX(pB,mail)
-// Parameters: pB   - pointer to board structure
-//             mail - value to write to mailbox
-//
-// Returns:    True if the transmit mailbox is empty, and mail is sent.
-//             False if it not empty.
-//
-// Description:
-//
-// If outgoing mailbox is empty, sends mail and returns true. If outgoing
-// mailbox is not empty, returns false.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static int
-iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
-{
-	if (inb(pB->i2eStatus) & STE_OUT_MAIL)
-		return 0;
-	outb(mail, pB->i2eXMail);
-	return 1;
-}
-
-//******************************************************************************
-// Function:   iiGetMailII(pB,mail)
-// Parameters: pB   - pointer to board structure
-//
-// Returns:    Mailbox data or NO_MAIL_HERE.
-//
-// Description:
-//
-// If no mail available, returns NO_MAIL_HERE otherwise returns the data from
-// the mailbox, which is guaranteed != NO_MAIL_HERE.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static unsigned short
-iiGetMailII(i2eBordStrPtr pB)
-{
-	if (I2_HAS_MAIL(pB)) {
-		outb(SEL_INMAIL, pB->i2ePointer);
-		return inb(pB->i2ePointer);
-	} else {
-		return NO_MAIL_HERE;
-	}
-}
-
-//******************************************************************************
-// Function:   iiGetMailIIEX(pB,mail)
-// Parameters: pB   - pointer to board structure
-//
-// Returns:    Mailbox data or NO_MAIL_HERE.
-//
-// Description:
-//
-// If no mail available, returns NO_MAIL_HERE otherwise returns the data from
-// the mailbox, which is guaranteed != NO_MAIL_HERE.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static unsigned short
-iiGetMailIIEX(i2eBordStrPtr pB)
-{
-	if (I2_HAS_MAIL(pB))
-		return inb(pB->i2eXMail);
-	else
-		return NO_MAIL_HERE;
-}
-
-//******************************************************************************
-// Function:   iiEnableMailIrqII(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// Enables board to interrupt host (only) by writing to host's in-bound mailbox.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static void
-iiEnableMailIrqII(i2eBordStrPtr pB)
-{
-	outb(SEL_MASK, pB->i2ePointer);
-	outb(ST_IN_MAIL, pB->i2ePointer);
-}
-
-//******************************************************************************
-// Function:   iiEnableMailIrqIIEX(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// Enables board to interrupt host (only) by writing to host's in-bound mailbox.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static void
-iiEnableMailIrqIIEX(i2eBordStrPtr pB)
-{
-	outb(MX_IN_MAIL, pB->i2eXMask);
-}
-
-//******************************************************************************
-// Function:   iiWriteMaskII(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// Writes arbitrary value to the mask register.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static void
-iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
-{
-	outb(SEL_MASK, pB->i2ePointer);
-	outb(value, pB->i2ePointer);
-}
-
-//******************************************************************************
-// Function:   iiWriteMaskIIEX(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns:    Nothing
-//
-// Description:
-//
-// Writes arbitrary value to the mask register.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static void
-iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value)
-{
-	outb(value, pB->i2eXMask);
-}
-
-//******************************************************************************
-// Function:   iiDownloadBlock(pB, pSource, isStandard)
-// Parameters: pB         - pointer to board structure
-//             pSource    - loadware block to download
-//             isStandard - True if "standard" loadware, else false.
-//
-// Returns:    Success or Failure
-//
-// Description:
-//
-// Downloads a single block (at pSource)to the board referenced by pB. Caller
-// sets isStandard to true/false according to whether the "standard" loadware is
-// what's being loaded. The normal process, then, is to perform an iiInitialize
-// to the board, then perform some number of iiDownloadBlocks using the returned
-// state to determine when download is complete.
-//
-// Possible return values: (see I2ELLIS.H)
-// II_DOWN_BADVALID
-// II_DOWN_BADFILE
-// II_DOWN_CONTINUING
-// II_DOWN_GOOD
-// II_DOWN_BAD
-// II_DOWN_BADSTATE
-// II_DOWN_TIMEOUT
-//
-// Uses the i2eState and i2eToLoad fields (initialized at iiInitialize) to
-// determine whether this is the first block, whether to check for magic
-// numbers, how many blocks there are to go...
-//
-//******************************************************************************
-static int
-iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard)
-{
-	int itemp;
-	int loadedFirst;
-
-	if (pB->i2eValid != I2E_MAGIC) return II_DOWN_BADVALID;
-
-	switch(pB->i2eState)
-	{
-	case II_STATE_READY:
-
-		// Loading the first block after reset. Must check the magic number of the
-		// loadfile, store the number of blocks we expect to load.
-		if (pSource->e.loadMagic != MAGIC_LOADFILE)
-		{
-			return II_DOWN_BADFILE;
-		}
-
-		// Next we store the total number of blocks to load, including this one.
-		pB->i2eToLoad = 1 + pSource->e.loadBlocksMore;
-
-		// Set the state, store the version numbers. ('Cause this may have come
-		// from a file - we might want to report these versions and revisions in
-		// case of an error!
-		pB->i2eState = II_STATE_LOADING;
-		pB->i2eLVersion = pSource->e.loadVersion;
-		pB->i2eLRevision = pSource->e.loadRevision;
-		pB->i2eLSub = pSource->e.loadSubRevision;
-
-		// The time and date of compilation is also available but don't bother
-		// storing it for normal purposes.
-		loadedFirst = 1;
-		break;
-
-	case II_STATE_LOADING:
-		loadedFirst = 0;
-		break;
-
-	default:
-		return II_DOWN_BADSTATE;
-	}
-
-	// Now we must be in the II_STATE_LOADING state, and we assume i2eToLoad
-	// must be positive still, because otherwise we would have cleaned up last
-	// time and set the state to II_STATE_LOADED.
-	if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) {
-		return II_DOWN_TIMEOUT;
-	}
-
-	if (!iiWriteBuf(pB, pSource->c, LOADWARE_BLOCK_SIZE)) {
-		return II_DOWN_BADVALID;
-	}
-
-	// If we just loaded the first block, wait for the fifo to empty an extra
-	// long time to allow for any special startup code in the firmware, like
-	// sending status messages to the LCD's.
-
-	if (loadedFirst) {
-		if (!iiWaitForTxEmpty(pB, MAX_DLOAD_START_TIME)) {
-			return II_DOWN_TIMEOUT;
-		}
-	}
-
-	// Determine whether this was our last block!
-	if (--(pB->i2eToLoad)) {
-		return II_DOWN_CONTINUING;    // more to come...
-	}
-
-	// It WAS our last block: Clean up operations...
-	// ...Wait for last buffer to drain from the board...
-	if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) {
-		return II_DOWN_TIMEOUT;
-	}
-	// If there were only a single block written, this would come back
-	// immediately and be harmless, though not strictly necessary.
-	itemp = MAX_DLOAD_ACK_TIME/10;
-	while (--itemp) {
-		if (I2_HAS_INPUT(pB)) {
-			switch (inb(pB->i2eData)) {
-			case LOADWARE_OK:
-				pB->i2eState =
-					isStandard ? II_STATE_STDLOADED :II_STATE_LOADED;
-
-				// Some revisions of the bootstrap firmware (e.g. ISA-8 1.0.2)
-				// will, // if there is a debug port attached, require some
-				// time to send information to the debug port now. It will do
-				// this before // executing any of the code we just downloaded.
-				// It may take up to 700 milliseconds.
-				if (pB->i2ePom.e.porDiag2 & POR_DEBUG_PORT) {
-					iiDelay(pB, 700);
-				}
-
-				return II_DOWN_GOOD;
-
-			case LOADWARE_BAD:
-			default:
-				return II_DOWN_BAD;
-			}
-		}
-
-		iiDelay(pB, 10);      // 10 mS granularity on checking condition
-	}
-
-	// Drop-through --> timed out waiting for firmware confirmation
-
-	pB->i2eState = II_STATE_BADLOAD;
-	return II_DOWN_TIMEOUT;
-}
-
-//******************************************************************************
-// Function:   iiDownloadAll(pB, pSource, isStandard, size)
-// Parameters: pB         - pointer to board structure
-//             pSource    - loadware block to download
-//             isStandard - True if "standard" loadware, else false.
-//             size       - size of data to download (in bytes)
-//
-// Returns:    Success or Failure
-//
-// Description:
-//
-// Given a pointer to a board structure, a pointer to the beginning of some
-// loadware, whether it is considered the "standard loadware", and the size of
-// the array in bytes loads the entire array to the board as loadware.
-//
-// Assumes the board has been freshly reset and the power-up reset message read.
-// (i.e., in II_STATE_READY). Complains if state is bad, or if there seems to be
-// too much or too little data to load, or if iiDownloadBlock complains.
-//******************************************************************************
-static int
-iiDownloadAll(i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard, int size)
-{
-	int status;
-
-	// We know (from context) board should be ready for the first block of
-	// download.  Complain if not.
-	if (pB->i2eState != II_STATE_READY) return II_DOWN_BADSTATE;
-
-	while (size > 0) {
-		size -= LOADWARE_BLOCK_SIZE;	// How much data should there be left to
-										// load after the following operation ?
-
-		// Note we just bump pSource by "one", because its size is actually that
-		// of an entire block, same as LOADWARE_BLOCK_SIZE.
-		status = iiDownloadBlock(pB, pSource++, isStandard);
-
-		switch(status)
-		{
-		case II_DOWN_GOOD:
-			return ( (size > 0) ? II_DOWN_OVER : II_DOWN_GOOD);
-
-		case II_DOWN_CONTINUING:
-			break;
-
-		default:
-			return status;
-		}
-	}
-
-	// We shouldn't drop out: it means "while" caught us with nothing left to
-	// download, yet the previous DownloadBlock did not return complete. Ergo,
-	// not enough data to match the size byte in the header.
-	return II_DOWN_UNDER;
-}
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
deleted file mode 100644
index fb6df24..0000000
--- a/drivers/char/ip2/i2ellis.h
+++ /dev/null
@@ -1,566 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Mainline code for the device driver
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// i2ellis.h
-//
-// IntelliPort-II and IntelliPort-IIEX
-//
-// Extremely
-// Low
-// Level
-// Interface
-// Services
-//
-// Structure Definitions and declarations for "ELLIS" service routines found in
-// i2ellis.c
-//
-// These routines are based on properties of the IntelliPort-II and -IIEX
-// hardware and bootstrap firmware, and are not sensitive to particular
-// conventions of any particular loadware.
-//
-// Unlike i2hw.h, which provides IRONCLAD hardware definitions, the material
-// here and in i2ellis.c is intended to provice a useful, but not required,
-// layer of insulation from the hardware specifics.
-//------------------------------------------------------------------------------
-#ifndef  I2ELLIS_H   /* To prevent multiple includes */
-#define  I2ELLIS_H   1
-//------------------------------------------------
-// Revision History:
-//
-// 30 September 1991 MAG First Draft Started
-// 12 October   1991 ...continued...
-//
-// 20 December  1996 AKM Linux version
-//-------------------------------------------------
-
-//----------------------
-// Mandatory Includes:
-//----------------------
-#include "ip2types.h"
-#include "i2hw.h"       // The hardware definitions
-
-//------------------------------------------
-// STAT_BOXIDS packets
-//------------------------------------------
-#define MAX_BOX		4
-
-typedef struct _bidStat
-{
-	unsigned char bid_value[MAX_BOX];
-} bidStat, *bidStatPtr;
-
-// This packet is sent in response to a CMD_GET_BOXIDS bypass command. For -IIEX
-// boards, reports the hardware-specific "asynchronous resource register" on
-// each expansion box. Boxes not present report 0xff. For -II boards, the first
-// element contains 0x80 for 8-port, 0x40 for 4-port boards.
-
-// Box IDs aka ARR or Async Resource Register (more than you want to know)
-//   7   6   5   4   3   2   1   0
-//   F   F   N   N   L   S   S   S
-//   =============================
-//   F   F   -  Product Family Designator
-//   =====+++++++++++++++++++++++++++++++
-//   0   0   -  Intelliport II EX / ISA-8
-//   1   0   -  IntelliServer
-//   0   1   -  SAC - Port Device (Intelliport III ??? )
-//           =====+++++++++++++++++++++++++++++++++++++++
-//           N   N   -  Number of Ports
-//           0   0   -  8  (eight)
-//           0   1   -  4  (four)
-//           1   0   -  12 (twelve)
-//           1   1   -  16 (sixteen)
-//                   =++++++++++++++++++++++++++++++++++
-//                   L  -   LCD Display Module Present
-//                   0  -   No
-//                   1  -   LCD module present
-//                   =========+++++++++++++++++++++++++++++++++++++
-//                      S   S   S - Async Signals Supported Designator
-//                      0   0   0 - 8dss, Mod DCE DB25 Female
-//                      0   0   1 - 6dss, RJ-45
-//                      0   1   0 - RS-232/422 dss, DB25 Female
-//                      0   1   1 - RS-232/422 dss, separate 232/422 DB25 Female
-//                      1   0   0 - 6dss, 921.6 I/F with ST654's
-//                      1   0   1 - RS-423/232 8dss, RJ-45 10Pin
-//                      1   1   0 - 6dss, Mod DCE DB25 Female
-//                      1   1   1 - NO BOX PRESENT
-
-#define FF(c)	((c & 0xC0) >> 6)
-#define NN(c)	((c & 0x30) >> 4)
-#define L(c)	((c & 0x08) >> 3)
-#define SSS(c)	 (c & 0x07)
-
-#define BID_HAS_654(x)	(SSS(x) == 0x04)
-#define BID_NO_BOX	0xff /* no box */
-#define BID_8PORT  	0x80 /* IP2-8 port */
-#define BID_4PORT   	0x81 /* IP2-4 port */
-#define BID_EXP_MASK   	0x30 /* IP2-EX  */
-#define BID_EXP_8PORT	0x00 /*     8, */
-#define BID_EXP_4PORT	0x10 /*     4, */
-#define BID_EXP_UNDEF	0x20 /*     UNDEF, */
-#define BID_EXP_16PORT	0x30 /*    16, */
-#define BID_LCD_CTRL   	0x08 /* LCD Controller */
-#define BID_LCD_NONE	0x00 /* - no controller present */
-#define BID_LCD_PRES   	0x08 /* - controller present */
-#define BID_CON_MASK	0x07 /* - connector pinouts */
-#define BID_CON_DB25	0x00 /* - DB-25 F */
-#define BID_CON_RJ45	0x01 /* - rj45 */
-
-//------------------------------------------------------------------------------
-// i2eBordStr
-//
-// This structure contains all the information the ELLIS routines require in
-// dealing with a particular board.
-//------------------------------------------------------------------------------
-// There are some queues here which are guaranteed to never contain the entry
-// for a single channel twice. So they must be slightly larger to allow
-// unambiguous full/empty management
-//
-#define CH_QUEUE_SIZE ABS_MOST_PORTS+2
-
-typedef struct _i2eBordStr
-{
-	porStr         i2ePom;	// Structure containing the power-on message.
-
-	unsigned short i2ePomSize;
-						// The number of bytes actually read if
-						// different from sizeof i2ePom, indicates
-						// there is an error!
-
-	unsigned short i2eStartMail;
-						// Contains whatever inbound mailbox data
-						// present at startup. NO_MAIL_HERE indicates
-						// nothing was present. No special
-						// significance as of this writing, but may be
-						// useful for diagnostic reasons.
-
-	unsigned short i2eValid;
-						// Indicates validity of the structure; if
-						// i2eValid == I2E_MAGIC, then we can trust
-						// the other fields. Some (especially
-						// initialization) functions are good about
-						// checking for validity.  Many functions do
-						// not, it being assumed that the larger
-						// context assures we are using a valid
-						// i2eBordStrPtr.
-
-	unsigned short i2eError;
-						// Used for returning an error condition from
-						// several functions which use i2eBordStrPtr
-						// as an argument.
-
-	// Accelerators to characterize separate features of a board, derived from a
-	// number of sources.
-
-	unsigned short i2eFifoSize;
-						// Always, the size of the FIFO. For
-						// IntelliPort-II, always the same, for -IIEX
-						// taken from the Power-On reset message.
-
-	volatile 
-	unsigned short i2eFifoRemains;
-						// Used during normal operation to indicate a
-						// lower bound on the amount of data which
-						// might be in the outbound fifo.
-
-	unsigned char  i2eFifoStyle;
-						// Accelerator which tells which style (-II or
-						// -IIEX) FIFO we are using.
-
-	unsigned char  i2eDataWidth16;
-						// Accelerator which tells whether we should
-						// do 8 or 16-bit data transfers.
-
-	unsigned char  i2eMaxIrq;
-						// The highest allowable IRQ, based on the
-						// slot size.
-
-	// Accelerators for various addresses on the board
-	int            i2eBase;        // I/O Address of the Board
-	int            i2eData;        // From here data transfers happen
-	int            i2eStatus;      // From here status reads happen
-	int            i2ePointer;     // (IntelliPort-II: pointer/commands)
-	int            i2eXMail;       // (IntelliPOrt-IIEX: mailboxes
-	int            i2eXMask;       // (IntelliPort-IIEX: mask write
-
-	//-------------------------------------------------------
-	// Information presented in a common format across boards
-	// For each box, bit map of the channels present.  Box closest to 
-	// the host is box 0. LSB is channel 0. IntelliPort-II (non-expandable)
-	// is taken to be box 0. These are derived from product i.d. registers.
-
-	unsigned short i2eChannelMap[ABS_MAX_BOXES];
-
-	// Same as above, except each is derived from firmware attempting to detect
-	// the uart presence (by reading a valid GFRCR register). If bits are set in
-	// i2eChannelMap and not in i2eGoodMap, there is a potential problem.
-
-	unsigned short i2eGoodMap[ABS_MAX_BOXES];
-
-	// ---------------------------
-	// For indirect function calls
-
-	// Routine to cause an N-millisecond delay: Patched by the ii2Initialize
-	// function.
-
-	void  (*i2eDelay)(unsigned int);
-
-	// Routine to write N bytes to the board through the FIFO. Returns true if
-	// all copacetic, otherwise returns false and error is in i2eError field.
-	// IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER.
-
-	int   (*i2eWriteBuf)(struct _i2eBordStr *, unsigned char *, int);
-
-	// Routine to read N bytes from the board through the FIFO. Returns true if
-	// copacetic, otherwise returns false and error in i2eError.
-	// IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER.
-
-	int   (*i2eReadBuf)(struct _i2eBordStr *, unsigned char *, int);
-
-	// Returns a word from FIFO. Will use 2 byte operations if needed.
-
-	unsigned short (*i2eReadWord)(struct _i2eBordStr *);
-
-	// Writes a word to FIFO. Will use 2 byte operations if needed.
-
-	void  (*i2eWriteWord)(struct _i2eBordStr *, unsigned short);
-
-	// Waits specified time for the Transmit FIFO to go empty. Returns true if
-	//  ok, otherwise returns false and error in i2eError.
-
-	int   (*i2eWaitForTxEmpty)(struct _i2eBordStr *, int);
-
-	// Returns true or false according to whether the outgoing mailbox is empty.
-
-	int   (*i2eTxMailEmpty)(struct _i2eBordStr *);
-
-	// Checks whether outgoing mailbox is empty.  If so, sends mail and returns
-	// true.  Otherwise returns false.
-
-	int   (*i2eTrySendMail)(struct _i2eBordStr *, unsigned char);
-
-	// If no mail available, returns NO_MAIL_HERE, else returns the value in the
-	// mailbox (guaranteed can't be NO_MAIL_HERE).
-
-	unsigned short (*i2eGetMail)(struct _i2eBordStr *);
-
-	// Enables the board to interrupt the host when it writes to the mailbox.
-	// Irqs will not occur, however, until the loadware separately enables
-	// interrupt generation to the host.  The standard loadware does this in
-	// response to a command packet sent by the host. (Also, disables
-	// any other potential interrupt sources from the board -- other than the
-	// inbound mailbox).
-
-	void  (*i2eEnableMailIrq)(struct _i2eBordStr *);
-
-	// Writes an arbitrary value to the mask register.
-
-	void  (*i2eWriteMask)(struct _i2eBordStr *, unsigned char);
-
-
-	// State information
-
-	// During downloading, indicates the number of blocks remaining to download
-	// to the board.
-
-	short i2eToLoad;
-
-	// State of board (see manifests below) (e.g., whether in reset condition,
-	// whether standard loadware is installed, etc.
-
-	unsigned char  i2eState;
-
-	// These three fields are only valid when there is loadware running on the
-	// board. (i2eState == II_STATE_LOADED or i2eState == II_STATE_STDLOADED )
-
-	unsigned char  i2eLVersion;  // Loadware version
-	unsigned char  i2eLRevision; // Loadware revision
-	unsigned char  i2eLSub;      // Loadware subrevision
-
-	// Flags which only have meaning in the context of the standard loadware.
-	// Somewhat violates the layering concept, but there is so little additional
-	// needed at the board level (while much additional at the channel level),
-	// that this beats maintaining two different per-board structures.
-
-	// Indicates which IRQ the board has been initialized (from software) to use
-	// For MicroChannel boards, any value different from IRQ_UNDEFINED means
-	// that the software command has been sent to enable interrupts (or specify
-	// they are disabled). Special value: IRQ_UNDEFINED indicates that the
-	// software command to select the interrupt has not yet been sent, therefore
-	// (since the standard loadware insists that it be sent before any other
-	// packets are sent) no other packets should be sent yet.
-
-	unsigned short i2eUsingIrq;
-
-	// This is set when we hit the MB_OUT_STUFFED mailbox, which prevents us
-	// putting more in the mailbox until an appropriate mailbox message is
-	// received.
-
-	unsigned char  i2eWaitingForEmptyFifo;
-
-	// Any mailbox bits waiting to be sent to the board are OR'ed in here.
-
-	unsigned char  i2eOutMailWaiting;
-
-	// The head of any incoming packet is read into here, is then examined and 
-	// we dispatch accordingly.
-
-	unsigned short i2eLeadoffWord[1];
-
-	// Running counter of interrupts where the mailbox indicated incoming data.
-
-	unsigned short i2eFifoInInts;
-
-	// Running counter of interrupts where the mailbox indicated outgoing data
-	// had been stripped.
-
-	unsigned short i2eFifoOutInts;
-
-	// If not void, gives the address of a routine to call if fatal board error
-	// is found (only applies to standard l/w).
-
-	void  (*i2eFatalTrap)(struct _i2eBordStr *);
-
-	// Will point to an array of some sort of channel structures (whose format
-	// is unknown at this level, being a function of what loadware is
-	// installed and the code configuration (max sizes of buffers, etc.)).
-
-	void  *i2eChannelPtr;
-
-	// Set indicates that the board has gone fatal.
-
-	unsigned short i2eFatal;
-
-	// The number of elements pointed to by i2eChannelPtr.
-
-	unsigned short i2eChannelCnt;
-
-	// Ring-buffers of channel structures whose channels have particular needs.
-
-	rwlock_t	Fbuf_spinlock;
-	volatile
-	unsigned short i2Fbuf_strip;	// Strip index
-	volatile 
-	unsigned short i2Fbuf_stuff;	// Stuff index
-	void  *i2Fbuf[CH_QUEUE_SIZE];	// An array of channel pointers
-									// of channels who need to send
-									// flow control packets.
-	rwlock_t	Dbuf_spinlock;
-	volatile
-	unsigned short i2Dbuf_strip;	// Strip index
-	volatile
-	unsigned short i2Dbuf_stuff;	// Stuff index
-	void  *i2Dbuf[CH_QUEUE_SIZE];	// An array of channel pointers
-									// of channels who need to send
-									// data or in-line command packets.
-	rwlock_t	Bbuf_spinlock;
-	volatile
-	unsigned short i2Bbuf_strip;	// Strip index
-	volatile
-	unsigned short i2Bbuf_stuff;	// Stuff index
-	void  *i2Bbuf[CH_QUEUE_SIZE];	// An array of channel pointers
-									// of channels who need to send
-									// bypass command packets.
-
-	/*
-	 * A set of flags to indicate that certain events have occurred on at least
-	 * one of the ports on this board. We use this to decide whether to spin
-	 * through the channels looking for breaks, etc.
-	 */
-	int		got_input;
-	int		status_change;
-	bidStat	channelBtypes;
-
-	/*
-	 * Debugging counters, etc.
-	 */
-	unsigned long debugFlowQueued;
-	unsigned long debugInlineQueued;
-	unsigned long debugDataQueued;
-	unsigned long debugBypassQueued;
-	unsigned long debugFlowCount;
-	unsigned long debugInlineCount;
-	unsigned long debugBypassCount;
-	
-	rwlock_t	read_fifo_spinlock;
-	rwlock_t	write_fifo_spinlock;
-
-//	For queuing interrupt bottom half handlers.	/\/\|=mhw=|\/\/
-	struct work_struct	tqueue_interrupt;
-
-	struct timer_list  SendPendingTimer;   // Used by iiSendPending
-	unsigned int	SendPendingRetry;
-} i2eBordStr, *i2eBordStrPtr;
-
-//-------------------------------------------------------------------
-// Macro Definitions for the indirect calls defined in the i2eBordStr
-//-------------------------------------------------------------------
-//
-#define iiDelay(a,b)          (*(a)->i2eDelay)(b)
-#define iiWriteBuf(a,b,c)     (*(a)->i2eWriteBuf)(a,b,c)
-#define iiReadBuf(a,b,c)      (*(a)->i2eReadBuf)(a,b,c)
-
-#define iiWriteWord(a,b)      (*(a)->i2eWriteWord)(a,b)
-#define iiReadWord(a)         (*(a)->i2eReadWord)(a)
-
-#define iiWaitForTxEmpty(a,b) (*(a)->i2eWaitForTxEmpty)(a,b)
-
-#define iiTxMailEmpty(a)      (*(a)->i2eTxMailEmpty)(a)
-#define iiTrySendMail(a,b)    (*(a)->i2eTrySendMail)(a,b)
-
-#define iiGetMail(a)          (*(a)->i2eGetMail)(a)
-#define iiEnableMailIrq(a)    (*(a)->i2eEnableMailIrq)(a)
-#define iiDisableMailIrq(a)   (*(a)->i2eWriteMask)(a,0)
-#define iiWriteMask(a,b)      (*(a)->i2eWriteMask)(a,b)
-
-//-------------------------------------------
-// Manifests for i2eBordStr:
-//-------------------------------------------
-
-typedef void (*delayFunc_t)(unsigned int);
-
-// i2eValid
-//
-#define I2E_MAGIC       0x4251   // Structure is valid.
-#define I2E_INCOMPLETE  0x1122   // Structure failed during init.
-
-
-// i2eError
-//
-#define I2EE_GOOD       0	// Operation successful
-#define I2EE_BADADDR    1	// Address out of range
-#define I2EE_BADSTATE   2	// Attempt to perform a function when the board
-							// structure was in the incorrect state
-#define I2EE_BADMAGIC   3	// Bad magic number from Power On test (i2ePomSize
-							// reflects what was read
-#define I2EE_PORM_SHORT 4	// Power On message too short
-#define I2EE_PORM_LONG  5	// Power On message too long
-#define I2EE_BAD_FAMILY 6	// Un-supported board family type
-#define I2EE_INCONSIST  7	// Firmware reports something impossible,
-							// e.g. unexpected number of ports... Almost no
-							// excuse other than bad FIFO...
-#define I2EE_POSTERR    8	// Power-On self test reported a bad error
-#define I2EE_BADBUS     9	// Unknown Bus type declared in message
-#define I2EE_TXE_TIME   10	// Timed out waiting for TX Fifo to empty
-#define I2EE_INVALID    11	// i2eValid field does not indicate a valid and
-							// complete board structure (for functions which
-							// require this be so.)
-#define I2EE_BAD_PORT   12	// Discrepancy between channels actually found and
-							// what the product is supposed to have. Check
-							// i2eGoodMap vs i2eChannelMap for details.
-#define I2EE_BAD_IRQ    13	// Someone specified an unsupported IRQ
-#define I2EE_NOCHANNELS 14	// No channel structures have been defined (for
-							// functions requiring this).
-
-// i2eFifoStyle
-//
-#define FIFO_II   0  /* IntelliPort-II style: see also i2hw.h */
-#define FIFO_IIEX 1  /* IntelliPort-IIEX style */
-
-// i2eGetMail
-//
-#define NO_MAIL_HERE    0x1111	// Since mail is unsigned char, cannot possibly
-								// promote to 0x1111.
-// i2eState
-//
-#define II_STATE_COLD      0  // Addresses have been defined, but board not even
-							  // reset yet.
-#define II_STATE_RESET     1  // Board,if it exists, has just been reset
-#define II_STATE_READY     2  // Board ready for its first block
-#define II_STATE_LOADING   3  // Board continuing load
-#define II_STATE_LOADED    4  // Board has finished load: status ok
-#define II_STATE_BADLOAD   5  // Board has finished load: failed!
-#define II_STATE_STDLOADED 6  // Board has finished load: standard firmware
-
-// i2eUsingIrq
-//
-#define I2_IRQ_UNDEFINED	0x1352  /* No valid irq (or polling = 0) can
-					 * ever promote to this! */
-//------------------------------------------
-// Handy Macros for i2ellis.c and others
-// Note these are common to -II and -IIEX
-//------------------------------------------
-
-// Given a pointer to the board structure, does the input FIFO have any data or
-// not?
-//
-#define I2_HAS_INPUT(pB)	!(inb(pB->i2eStatus) & ST_IN_EMPTY)
-
-// Given a pointer to the board structure, is there anything in the incoming
-// mailbox?
-//
-#define I2_HAS_MAIL(pB)		(inb(pB->i2eStatus) & ST_IN_MAIL)
-
-#define I2_UPDATE_FIFO_ROOM(pB)	((pB)->i2eFifoRemains = (pB)->i2eFifoSize)
-
-//------------------------------------------
-// Function Declarations for i2ellis.c
-//------------------------------------------
-//
-// Functions called directly
-//
-// Initialization of a board & structure is in four (five!) parts:
-//
-// 1) iiSetAddress() - Define the board address & delay function for a board.
-// 2) iiReset()      - Reset the board   (provided it exists)
-//       -- Note you may do this to several boards --
-// 3) iiResetDelay() - Delay for 2 seconds (once for all boards)
-// 4) iiInitialize() - Attempt to read Power-up message; further initialize
-//                     accelerators
-//
-// Then you may use iiDownloadAll() or iiDownloadFile() (in i2file.c) to write
-// loadware.  To change loadware, you must begin again with step 2, resetting
-// the board again (step 1 not needed).
-
-static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t );
-static int iiReset(i2eBordStrPtr);
-static int iiResetDelay(i2eBordStrPtr);
-static int iiInitialize(i2eBordStrPtr);
-
-// Routine to validate that all channels expected are there.
-//
-extern int iiValidateChannels(i2eBordStrPtr);
-
-// Routine used to download a block of loadware.
-//
-static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int);
-
-// Return values given by iiDownloadBlock, iiDownloadAll, iiDownloadFile:
-//
-#define II_DOWN_BADVALID   0	// board structure is invalid
-#define II_DOWN_CONTINUING 1	// So far, so good, firmware expects more
-#define II_DOWN_GOOD       2	// Download complete, CRC good
-#define II_DOWN_BAD        3	// Download complete, but CRC bad
-#define II_DOWN_BADFILE    4	// Bad magic number in loadware file
-#define II_DOWN_BADSTATE   5	// Board is in an inappropriate state for
-								// downloading loadware. (see i2eState)
-#define II_DOWN_TIMEOUT    6	// Timeout waiting for firmware
-#define II_DOWN_OVER       7	// Too much data
-#define II_DOWN_UNDER      8	// Not enough data
-#define II_DOWN_NOFILE     9	// Loadware file not found
-
-// Routine to download an entire loadware module: Return values are a subset of
-// iiDownloadBlock's, excluding, of course, II_DOWN_CONTINUING
-//
-static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
-
-// Many functions defined here return True if good, False otherwise, with an
-// error code in i2eError field. Here is a handy macro for setting the error
-// code and returning.
-//
-#define I2_COMPLETE(pB,code) do { \
-		 pB->i2eError = code; \
-		 return (code == I2EE_GOOD);\
-	} while (0)
-
-#endif   // I2ELLIS_H
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
deleted file mode 100644
index c0ba6c0..0000000
--- a/drivers/char/ip2/i2hw.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Definitions limited to properties of the hardware or the
-*                bootstrap firmware. As such, they are applicable regardless of
-*                operating system or loadware (standard or diagnostic).
-*
-*******************************************************************************/
-#ifndef I2HW_H
-#define I2HW_H 1
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 23 September 1991 MAG   First Draft Started...through...
-// 11 October 1991   ...   Continuing development...
-//  6 August 1993          Added support for ISA-4 (asic) which is architected
-//                         as an ISA-CEX with a single 4-port box.
-//
-// 20 December 1996  AKM   Version for Linux
-//
-//------------------------------------------------------------------------------
-/*------------------------------------------------------------------------------
-
-HARDWARE DESCRIPTION:
-
-Introduction:
-
-The IntelliPort-II and IntelliPort-IIEX products occupy a block of eight (8)
-addresses in the host's I/O space.
-
-Some addresses are used to transfer data to/from the board, some to transfer
-so-called "mailbox" messages, and some to read bit-mapped status information.
-While all the products in the line are functionally similar, some use a 16-bit
-data path to transfer data while others use an 8-bit path. Also, the use of
-command /status/mailbox registers differs slightly between the II and IIEX
-branches of the family.
-
-The host determines what type of board it is dealing with by reading a string of
-sixteen characters from the board. These characters are always placed in the
-fifo by the board's local processor whenever the board is reset (either from
-power-on or under software control) and are known as the "Power-on Reset
-Message." In order that this message can be read from either type of board, the
-hardware registers used in reading this message are the same. Once this message
-has been read by the host, then it has the information required to operate.
-
-General Differences between boards:
-
-The greatest structural difference is between the -II and -IIEX families of
-product. The -II boards use the Am4701 dual 512x8 bidirectional fifo to support
-the data path, mailbox registers, and status registers. This chip contains some
-features which are not used in the IntelliPort-II products; a description of
-these is omitted here. Because of these many features, it contains many
-registers, too many to access directly within a small address space. They are
-accessed by first writing a value to a "pointer" register. This value selects
-the register to be accessed.  The next read or write to that address accesses
-the selected register rather than the pointer register.
-
-The -IIEX boards use a proprietary design similar to the Am4701 in function. But
-because of a simpler, more streamlined design it doesn't require so many
-registers. This means they can be accessed directly in single operations rather
-than through a pointer register.
-
-Besides these differences, there are differences in whether 8-bit or 16-bit
-transfers are used to move data to the board.
-
-The -II boards are capable only of 8-bit data transfers, while the -IIEX boards
-may be configured for either 8-bit or 16-bit data transfers. If the on-board DIP
-switch #8 is ON, and the card has been installed in a 16-bit slot, 16-bit
-transfers are supported (and will be expected by the standard loadware). The
-on-board firmware can determine the position of the switch, and whether the
-board is installed in a 16-bit slot; it supplies this information to the host as
-part of the power-up reset message.
-
-The configuration switch (#8) and slot selection do not directly configure the
-hardware. It is up to the on-board loadware and host-based drivers to act
-according to the selected options. That is, loadware and drivers could be
-written to perform 8-bit transfers regardless of the state of the DIP switch or
-slot (and in a diagnostic environment might well do so). Likewise, 16-bit
-transfers could be performed as long as the card is in a 16-bit slot.
-
-Note the slot selection and DIP switch selection are provided separately: a
-board running in 8-bit mode in a 16-bit slot has a greater range of possible
-interrupts to choose from; information of potential use to the host.
-
-All 8-bit data transfers are done in the same way, regardless of whether on a
--II board or a -IIEX board.
-
-The host must consider two things then: 1) whether a -II or -IIEX product is
-being used, and 2) whether an 8-bit or 16-bit data path is used.
-
-A further difference is that -II boards always have a 512-byte fifo operating in
-each direction. -IIEX boards may use fifos of varying size; this size is
-reported as part of the power-up message.
-
-I/O Map Of IntelliPort-II and IntelliPort-IIEX boards:
-(Relative to the chosen base address)
-
-Addr  R/W      IntelliPort-II    IntelliPort-IIEX
-----  ---      --------------    ----------------
-0     R/W      Data Port (byte)  Data Port (byte or word)
-1     R/W      (Not used)        (MSB of word-wide data written to Data Port)
-2     R        Status Register   Status Register
-2     W        Pointer Register  Interrupt Mask Register
-3     R/W      (Not used)        Mailbox Registers (6 bits: 11111100)
-4,5   --       Reserved for future products
-6     --       Reserved for future products
-7     R        Guaranteed to have no effect
-7     W        Hardware reset of board.
-
-
-Rules:
-All data transfers are performed using the even i/o address. If byte-wide data
-transfers are being used, do INB/OUTB operations on the data port. If word-wide
-transfers are used, do INW/OUTW operations. In some circumstances (such as
-reading the power-up message) you will do INB from the data port, but in this
-case the MSB of each word read is lost. When accessing all other unreserved
-registers, use byte operations only.
-------------------------------------------------------------------------------*/
-
-//------------------------------------------------
-// Mandatory Includes:
-//------------------------------------------------
-//
-#include "ip2types.h"
-
-//-------------------------------------------------------------------------
-// Manifests for the I/O map:
-//-------------------------------------------------------------------------
-// R/W: Data port (byte) for IntelliPort-II,
-// R/W: Data port (byte or word) for IntelliPort-IIEX
-// Incoming or outgoing data passes through a FIFO, the status of which is
-// available in some of the bits in FIFO_STATUS. This (bidirectional) FIFO is
-// the primary means of transferring data, commands, flow-control, and status
-// information between the host and board.
-//
-#define FIFO_DATA 0
-
-// Another way of passing information between the board and the host is
-// through "mailboxes". Unlike a FIFO, a mailbox holds only a single byte of
-// data.  Writing data to the mailbox causes a status bit to be set, and
-// potentially interrupting the intended receiver. The sender has some way to
-// determine whether the data has been read yet; as soon as it has, it may send
-// more. The mailboxes are handled differently on -II and -IIEX products, as
-// suggested below.
-//------------------------------------------------------------------------------
-// Read: Status Register for IntelliPort-II or -IIEX
-// The presence of any bit set here will cause an interrupt to the host,
-// provided the corresponding bit has been unmasked in the interrupt mask
-// register. Furthermore, interrupts to the host are disabled globally until the
-// loadware selects the irq line to use. With the exception of STN_MR, the bits
-// remain set so long as the associated condition is true.
-//
-#define FIFO_STATUS 2
-
-// Bit map of status bits which are identical for -II and -IIEX
-//
-#define ST_OUT_FULL  0x40  // Outbound FIFO full
-#define ST_IN_EMPTY  0x20  // Inbound FIFO empty
-#define ST_IN_MAIL   0x04  // Inbound Mailbox full
-
-// The following exists only on the Intelliport-IIEX, and indicates that the
-// board has not read the last outgoing mailbox data yet. In the IntelliPort-II,
-// the outgoing mailbox may be read back: a zero indicates the board has read
-// the data.
-//
-#define STE_OUT_MAIL 0x80  // Outbound mailbox full (!)
-
-// The following bits are defined differently for -II and -IIEX boards. Code
-// which relies on these bits will need to be functionally different for the two
-// types of boards and should be generally avoided because of the additional
-// complexity this creates:
-
-// Bit map of status bits only on -II
-
-// Fifo has been RESET (cleared when the status register is read). Note that
-// this condition cannot be masked and would always interrupt the host, except
-// that the hardware reset also disables interrupts globally from the board
-// until re-enabled by loadware. This could also arise from the
-// Am4701-supported command to reset the chip, but this command is generally not
-// used here.
-//
-#define STN_MR       0x80
-
-// See the AMD Am4701 data sheet for details on the following four bits. They
-// are not presently used by Computone drivers.
-//
-#define STN_OUT_AF  0x10  // Outbound FIFO almost full (programmable)
-#define STN_IN_AE   0x08  // Inbound FIFO almost empty (programmable)
-#define STN_BD      0x02  // Inbound byte detected
-#define STN_PE      0x01  // Parity/Framing condition detected
-
-// Bit-map of status bits only on -IIEX
-//
-#define STE_OUT_HF  0x10  // Outbound FIFO half full
-#define STE_IN_HF   0x08  // Inbound FIFO half full
-#define STE_IN_FULL 0x02  // Inbound FIFO full
-#define STE_OUT_MT  0x01  // Outbound FIFO empty
-
-//------------------------------------------------------------------------------
-
-// Intelliport-II -- Write Only: the pointer register.
-// Values are written to this register to select the Am4701 internal register to
-// be accessed on the next operation.
-//
-#define FIFO_PTR    0x02
-
-// Values for the pointer register
-//
-#define SEL_COMMAND 0x1    // Selects the Am4701 command register
-
-// Some possible commands:
-//
-#define SEL_CMD_MR  0x80	// Am4701 command to reset the chip
-#define SEL_CMD_SH  0x40	// Am4701 command to map the "other" port into the
-							// status register.
-#define SEL_CMD_UNSH   0	// Am4701 command to "unshift": port maps into its
-							// own status register.
-#define SEL_MASK     0x2	// Selects the Am4701 interrupt mask register. The
-							// interrupt mask register is bit-mapped to match 
-							// the status register (FIFO_STATUS) except for
-							// STN_MR. (See above.)
-#define SEL_BYTE_DET 0x3	// Selects the Am4701 byte-detect register. (Not
-							// normally used except in diagnostics.)
-#define SEL_OUTMAIL  0x4	// Selects the outbound mailbox (R/W). Reading back
-							// a value of zero indicates that the mailbox has
-							// been read by the board and is available for more
-							// data./ Writing to the mailbox optionally
-							// interrupts the board, depending on the loadware's
-							// setting of its interrupt mask register.
-#define SEL_AEAF     0x5	// Selects AE/AF threshold register.
-#define SEL_INMAIL   0x6	// Selects the inbound mailbox (Read)
-
-//------------------------------------------------------------------------------
-// IntelliPort-IIEX --  Write Only: interrupt mask (and misc flags) register:
-// Unlike IntelliPort-II, bit assignments do NOT match those of the status
-// register.
-//
-#define FIFO_MASK    0x2
-
-// Mailbox readback select:
-// If set, reads to FIFO_MAIL will read the OUTBOUND mailbox (host to board). If
-// clear (default on reset) reads to FIFO_MAIL will read the INBOUND mailbox.
-// This is the normal situation. The clearing of a mailbox is determined on
-// -IIEX boards by waiting for the STE_OUT_MAIL bit to clear. Readback
-// capability is provided for diagnostic purposes only.
-//
-#define  MX_OUTMAIL_RSEL   0x80
-
-#define  MX_IN_MAIL  0x40	// Enables interrupts when incoming mailbox goes
-							// full (ST_IN_MAIL set).
-#define  MX_IN_FULL  0x20	// Enables interrupts when incoming FIFO goes full
-							// (STE_IN_FULL).
-#define  MX_IN_MT    0x08	// Enables interrupts when incoming FIFO goes empty
-							// (ST_IN_MT).
-#define  MX_OUT_FULL 0x04	// Enables interrupts when outgoing FIFO goes full
-							// (ST_OUT_FULL).
-#define  MX_OUT_MT   0x01	// Enables interrupts when outgoing FIFO goes empty
-							// (STE_OUT_MT).
-
-// Any remaining bits are reserved, and should be written to ZERO for
-// compatibility with future Computone products.
-
-//------------------------------------------------------------------------------
-// IntelliPort-IIEX: -- These are only 6-bit mailboxes !!! -- 11111100 (low two
-// bits always read back 0).
-// Read:  One of the mailboxes, usually Inbound.
-//        Inbound Mailbox (MX_OUTMAIL_RSEL = 0)
-//        Outbound Mailbox (MX_OUTMAIL_RSEL = 1)
-// Write: Outbound Mailbox
-// For the IntelliPort-II boards, the outbound mailbox is read back to determine
-// whether the board has read the data (0 --> data has been read). For the
-// IntelliPort-IIEX, this is done by reading a status register. To determine
-// whether mailbox is available for more outbound data, use the STE_OUT_MAIL bit
-// in FIFO_STATUS. Moreover, although the Outbound Mailbox can be read back by
-// setting MX_OUTMAIL_RSEL, it is NOT cleared when the board reads it, as is the
-// case with the -II boards. For this reason, FIFO_MAIL is normally used to read
-// the inbound FIFO, and MX_OUTMAIL_RSEL kept clear. (See above for
-// MX_OUTMAIL_RSEL description.)
-//
-#define  FIFO_MAIL   0x3
-
-//------------------------------------------------------------------------------
-// WRITE ONLY:  Resets the board. (Data doesn't matter).
-//
-#define  FIFO_RESET  0x7
-
-//------------------------------------------------------------------------------
-// READ ONLY:  Will have no effect. (Data is undefined.)
-// Actually, there will be an effect, in that the operation is sure to generate
-// a bus cycle: viz., an I/O byte Read. This fact can be used to enforce short
-// delays when no comparable time constant is available.
-//
-#define  FIFO_NOP    0x7
-
-//------------------------------------------------------------------------------
-// RESET & POWER-ON RESET MESSAGE
-/*------------------------------------------------------------------------------
-RESET:
-
-The IntelliPort-II and -IIEX boards are reset in three ways: Power-up, channel
-reset, and via a write to the reset register described above. For products using
-the ISA bus, these three sources of reset are equvalent. For MCA and EISA buses,
-the Power-up and channel reset sources cause additional hardware initialization
-which should only occur at system startup time.
-
-The third type of reset, called a "command reset", is done by writing any data
-to the FIFO_RESET address described above. This resets the on-board processor,
-FIFO, UARTS, and associated hardware.
-
-This passes control of the board to the bootstrap firmware, which performs a
-Power-On Self Test and which detects its current configuration. For example,
--IIEX products determine the size of FIFO which has been installed, and the
-number and type of expansion boxes attached.
-
-This and other information is then written to the FIFO in a 16-byte data block
-to be read by the host. This block is guaranteed to be present within two (2)
-seconds of having received the command reset. The firmware is now ready to
-receive loadware from the host.
-
-It is good practice to perform a command reset to the board explicitly as part
-of your software initialization.  This allows your code to properly restart from
-a soft boot. (Many systems do not issue channel reset on soft boot).
-
-Because of a hardware reset problem on some of the Cirrus Logic 1400's which are
-used on the product, it is recommended that you reset the board twice, separated
-by an approximately 50 milliseconds delay. (VERY approximately: probably ok to
-be off by a factor of five. The important point is that the first command reset
-in fact generates a reset pulse on the board. This pulse is guaranteed to last
-less than 10 milliseconds. The additional delay ensures the 1400 has had the
-chance to respond sufficiently to the first reset. Why not a longer delay? Much
-more than 50 milliseconds gets to be noticable, but the board would still work.
-
-Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap
-firmware is ready to receive loadware.
-
-Note on Power-on Reset Message format:
-The various fields have been designed with future expansion in view.
-Combinations of bitfields and values have been defined which define products
-which may not currently exist. This has been done to allow drivers to anticipate
-the possible introduction of products in a systematic fashion. This is not
-intended to suggest that each potential product is actually under consideration.
-------------------------------------------------------------------------------*/
-
-//----------------------------------------
-// Format of Power-on Reset Message
-//----------------------------------------
-
-typedef union _porStr		// "por" stands for Power On Reset
-{
-	unsigned char  c[16];	// array used when considering the message as a
-							// string of undifferentiated characters
-
-	struct					// Elements used when considering values
-	{
-		// The first two bytes out of the FIFO are two magic numbers. These are
-		// intended to establish that there is indeed a member of the
-		// IntelliPort-II(EX) family present. The remaining bytes may be 
-		// expected // to be valid. When reading the Power-on Reset message, 
-		// if the magic numbers do not match it is probably best to stop
-		// reading immediately. You are certainly not reading our board (unless
-		// hardware is faulty), and may in fact be reading some other piece of
-		// hardware.
-
-		unsigned char porMagic1;   // magic number: first byte == POR_MAGIC_1 
-		unsigned char porMagic2;   // magic number: second byte == POR_MAGIC_2 
-
-		// The Version, Revision, and Subrevision are stored as absolute numbers
-		// and would normally be displayed in the format V.R.S (e.g. 1.0.2)
-
-		unsigned char porVersion;  // Bootstrap firmware version number
-		unsigned char porRevision; // Bootstrap firmware revision number
-		unsigned char porSubRev;   // Bootstrap firmware sub-revision number
-
-		unsigned char porID;	// Product ID:  Bit-mapped according to
-								// conventions described below. Among other
-								// things, this allows us to distinguish
-								// IntelliPort-II boards from IntelliPort-IIEX
-								// boards.
-
-		unsigned char porBus;	// IntelliPort-II: Unused
-								// IntelliPort-IIEX: Bus Information:
-								// Bit-mapped below
-
-		unsigned char porMemory;	// On-board DRAM size: in 32k blocks
-
-		// porPorts1 (and porPorts2) are used to determine the ports which are
-		// available to the board. For non-expandable product, a single number 
-		// is sufficient. For expandable product, the board may be connected
-		// to as many as four boxes. Each box may be (so far) either a 16-port
-		// or an 8-port size. Whenever an 8-port box is used, the remaining 8
-		// ports leave gaps between existing channels. For that reason,
-		// expandable products must report a MAP of available channels. Since 
-		// each UART supports four ports, we represent each UART found by a
-		// single bit. Using two bytes to supply the mapping information we
-		// report the presense or absense of up to 16 UARTS, or 64 ports in
-		// steps of 4 ports. For -IIEX products, the ports are numbered
-		// starting at the box closest to the controller in the "chain".
-
-		// Interpreted Differently for IntelliPort-II and -IIEX.
-		// -II:   Number of ports (Derived actually from product ID). See
-		// Diag1&2 to indicate if uart was actually detected.
-		// -IIEX: Bit-map of UARTS found, LSB (see below for MSB of this). This
-		//        bitmap is based on detecting the uarts themselves; 
-		//        see porFlags for information from the box i.d's.
-		unsigned char  porPorts1;
-
-		unsigned char  porDiag1;	// Results of on-board P.O.S.T, 1st byte
-		unsigned char  porDiag2;	// Results of on-board P.O.S.T, 2nd byte
-		unsigned char  porSpeed;	// Speed of local CPU: given as MHz x10
-									// e.g., 16.0 MHz CPU is reported as 160
-		unsigned char  porFlags;	// Misc information (see manifests below)
-									// Bit-mapped: CPU type, UART's present
-
-		unsigned char  porPorts2;	// -II:  Undefined
-									// -IIEX: Bit-map of UARTS found, MSB (see
-									//        above for LSB)
-
-		// IntelliPort-II: undefined
-		// IntelliPort-IIEX: 1 << porFifoSize gives the size, in bytes, of the
-		// host interface FIFO, in each direction. When running the -IIEX in
-		// 8-bit mode, fifo capacity is halved. The bootstrap firmware will
-		// have already accounted for this fact in generating this number.
-		unsigned char  porFifoSize;
-
-		// IntelliPort-II: undefined
-		// IntelliPort-IIEX: The number of boxes connected. (Presently 1-4)
-		unsigned char  porNumBoxes;
-	} e;
-} porStr, *porStrPtr;
-
-//--------------------------
-// Values for porStr fields
-//--------------------------
-
-//---------------------
-// porMagic1, porMagic2
-//----------------------
-//
-#define  POR_MAGIC_1    0x96  // The only valid value for porMagic1
-#define  POR_MAGIC_2    0x35  // The only valid value for porMagic2
-#define  POR_1_INDEX    0     // Byte position of POR_MAGIC_1
-#define  POR_2_INDEX    1     // Ditto for POR_MAGIC_2
-
-//----------------------
-// porID
-//----------------------
-//
-#define  POR_ID_FAMILY  0xc0	// These bits indicate the general family of
-								// product.
-#define  POR_ID_FII     0x00	// Family is "IntelliPort-II"
-#define  POR_ID_FIIEX   0x40	// Family is "IntelliPort-IIEX"
-
-// These bits are reserved, presently zero. May be used at a later date to
-// convey other product information.
-//
-#define POR_ID_RESERVED 0x3c
-
-#define POR_ID_SIZE     0x03	// Remaining bits indicate number of ports &
-								// Connector information.
-#define POR_ID_II_8     0x00	// For IntelliPort-II, indicates 8-port using
-								// standard brick.
-#define POR_ID_II_8R    0x01	// For IntelliPort-II, indicates 8-port using
-								// RJ11's (no CTS)
-#define POR_ID_II_6     0x02	// For IntelliPort-II, indicates 6-port using
-								// RJ45's
-#define POR_ID_II_4     0x03	// For IntelliPort-II, indicates 4-port using
-								// 4xRJ45 connectors
-#define POR_ID_EX       0x00	// For IntelliPort-IIEX, indicates standard
-								// expandable controller (other values reserved)
-
-//----------------------
-// porBus
-//----------------------
-
-// IntelliPort-IIEX only: Board is installed in a 16-bit slot
-//
-#define POR_BUS_SLOT16  0x20
-
-// IntelliPort-IIEX only: DIP switch #8 is on, selecting 16-bit host interface
-// operation.
-// 
-#define POR_BUS_DIP16   0x10
-
-// Bits 0-2 indicate type of bus: This information is stored in the bootstrap
-// loadware, different loadware being used on different products for different
-// buses. For most situations, the drivers do not need this information; but it
-// is handy in a diagnostic environment. For example, on microchannel boards,
-// you would not want to try to test several interrupts, only the one for which
-// you were configured.
-//
-#define  POR_BUS_TYPE   0x07
-
-// Unknown:  this product doesn't know what bus it is running in. (e.g. if same
-// bootstrap firmware were wanted for two different buses.)
-//
-#define  POR_BUS_T_UNK  0
-
-// Note: existing firmware for ISA-8 and MC-8 currently report the POR_BUS_T_UNK
-// state, since the same bootstrap firmware is used for each.
-
-#define  POR_BUS_T_MCA  1  // MCA BUS */
-#define  POR_BUS_T_EISA 2  // EISA BUS */
-#define  POR_BUS_T_ISA  3  // ISA BUS */
-
-// Values 4-7 Reserved
-
-// Remaining bits are reserved
-
-//----------------------
-// porDiag1
-//----------------------
-
-#define  POR_BAD_MAPPER 0x80	// HW failure on P.O.S.T: Chip mapper failed
-
-// These two bits valid only for the IntelliPort-II
-//
-#define  POR_BAD_UART1  0x01	// First  1400 bad
-#define  POR_BAD_UART2  0x02	// Second 1400 bad
-
-//----------------------
-// porDiag2
-//----------------------
-
-#define  POR_DEBUG_PORT 0x80	// debug port was detected by the P.O.S.T
-#define  POR_DIAG_OK    0x00	// Indicates passage: Failure codes not yet
-								// available.
-								// Other bits undefined.
-//----------------------
-// porFlags
-//----------------------
-
-#define  POR_CPU     0x03	// These bits indicate supposed CPU type
-#define  POR_CPU_8   0x01	// Board uses an 80188 (no such thing yet)
-#define  POR_CPU_6   0x02	// Board uses an 80186 (all existing products)
-#define  POR_CEX4    0x04	// If set, this is an ISA-CEX/4: An ISA-4 (asic)
-							// which is architected like an ISA-CEX connected
-							// to a (hitherto impossible) 4-port box.
-#define POR_BOXES    0xf0	// Valid for IntelliPort-IIEX only: Map of Box
-							// sizes based on box I.D.
-#define POR_BOX_16   0x10	// Set indicates 16-port, clear 8-port
-
-//-------------------------------------
-// LOADWARE and DOWNLOADING CODE
-//-------------------------------------
-
-/*
-Loadware may be sent to the board in two ways:
-1) It may be read from a (binary image) data file block by block as each block
-	is sent to the board. This is only possible when the initialization is
-	performed by code which can access your file system. This is most suitable
-	for diagnostics and appications which use the interface library directly.
-
-2) It may be hard-coded into your source by including a .h file (typically
-	supplied by Computone), which declares a data array and initializes every
-	element. This achieves the same result as if an entire loadware file had 
-	been read into the array.
-
-	This requires more data space in your program, but access to the file system
-	is not required. This method is more suited to driver code, which typically
-	is running at a level too low to access the file system directly.
-
-At present, loadware can only be generated at Computone.
-
-All Loadware begins with a header area which has a particular format. This
-includes a magic number which identifies the file as being (purportedly)
-loadware, CRC (for the loader), and version information.
-*/
-
-
-//-----------------------------------------------------------------------------
-// Format of loadware block
-//
-// This is defined as a union so we can pass a pointer to one of these items
-// and (if it is the first block) pick out the version information, etc.
-//
-// Otherwise, to deal with this as a simple character array
-//------------------------------------------------------------------------------
-
-#define LOADWARE_BLOCK_SIZE   512   // Number of bytes in each block of loadware
-
-typedef union _loadHdrStr
-{
-	unsigned char c[LOADWARE_BLOCK_SIZE];  // Valid for every block
-
-	struct	// These fields are valid for only the first block of loadware.
-	{
-		unsigned char loadMagic;		// Magic number: see below
-		unsigned char loadBlocksMore;	// How many more blocks?
-		unsigned char loadCRC[2];		// Two CRC bytes: used by loader
-		unsigned char loadVersion;		// Version number
-		unsigned char loadRevision;		// Revision number
-		unsigned char loadSubRevision;	// Sub-revision number
-		unsigned char loadSpares[9];	// Presently unused
-		unsigned char loadDates[32];	// Null-terminated string which can give
-										// date and time of compilation
-	} e;
-} loadHdrStr, *loadHdrStrPtr;
-
-//------------------------------------
-// Defines for downloading code:
-//------------------------------------
-
-// The loadMagic field in the first block of the loadfile must be this, else the
-// file is not valid.
-//
-#define  MAGIC_LOADFILE 0x3c
-
-// How do we know the load was successful? On completion of the load, the
-// bootstrap firmware returns a code to indicate whether it thought the download
-// was valid and intends to execute it. These are the only possible valid codes:
-//
-#define  LOADWARE_OK    0xc3        // Download was ok
-#define  LOADWARE_BAD   0x5a        // Download was bad (CRC error)
-
-// Constants applicable to writing blocks of loadware:
-// The first block of loadware might take 600 mS to load, in extreme cases.
-// (Expandable board: worst case for sending startup messages to the LCD's).
-// The 600mS figure is not really a calculation, but a conservative
-// guess/guarantee. Usually this will be within 100 mS, like subsequent blocks.
-//
-#define  MAX_DLOAD_START_TIME 1000  // 1000 mS
-#define  MAX_DLOAD_READ_TIME  100   // 100 mS
-
-// Firmware should respond with status (see above) within this long of host
-// having sent the final block.
-//
-#define  MAX_DLOAD_ACK_TIME   100   // 100 mS, again!
-
-//------------------------------------------------------
-// MAXIMUM NUMBER OF PORTS PER BOARD:
-// This is fixed for now (with the expandable), but may
-// be expanding according to even newer products.
-//------------------------------------------------------
-//
-#define ABS_MAX_BOXES   4     // Absolute most boxes per board
-#define ABS_BIGGEST_BOX 16    // Absolute the most ports per box
-#define ABS_MOST_PORTS  (ABS_MAX_BOXES * ABS_BIGGEST_BOX)
-
-#define I2_OUTSW(port, addr, count)	outsw((port), (addr), (((count)+1)/2))
-#define I2_OUTSB(port, addr, count)	outsb((port), (addr), (((count)+1))&-2)
-#define I2_INSW(port, addr, count)	insw((port), (addr), (((count)+1)/2))
-#define I2_INSB(port, addr, count)	insb((port), (addr), (((count)+1))&-2)
-
-#endif   // I2HW_H
-
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
deleted file mode 100644
index 0d10b89..0000000
--- a/drivers/char/ip2/i2lib.c
+++ /dev/null
@@ -1,2214 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: High-level interface code for the device driver. Uses the
-*                Extremely Low Level Interface Support (i2ellis.c). Provides an
-*                interface to the standard loadware, to support drivers or
-*                application code. (This is included source code, not a separate
-*                compilation module.)
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// Note on Strategy:
-// Once the board has been initialized, it will interrupt us when:
-// 1) It has something in the fifo for us to read (incoming data, flow control
-// packets, or whatever).
-// 2) It has stripped whatever we have sent last time in the FIFO (and
-// consequently is ready for more).
-//
-// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This
-// worsens performance considerably, but is done so that a great many channels
-// might use only a little memory.
-//------------------------------------------------------------------------------
-
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 0.00 -  4/16/91 --- First Draft
-// 0.01 -  4/29/91 --- 1st beta release
-// 0.02 -  6/14/91 --- Changes to allow small model compilation
-// 0.03 -  6/17/91 MAG Break reporting protected from interrupts routines with
-//                     in-line asm added for moving data to/from ring buffers,
-//                     replacing a variety of methods used previously.
-// 0.04 -  6/21/91 MAG Initial flow-control packets not queued until
-//                     i2_enable_interrupts time. Former versions would enqueue
-//                     them at i2_init_channel time, before we knew how many
-//                     channels were supposed to exist!
-// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now;
-//                     supports new 16-bit protocol and expandable boards.
-//      - 10/24/91 MAG Most changes in place and stable.
-// 0.06 -  2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no
-//                     argument.
-// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt
-//                     level (mostly responses to specific commands.)
-// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet
-// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE
-//                     turning on the interrupt.
-// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check
-//                     some incoming.
-//
-// 1.1  - 12/25/96 AKM Linux version.
-//      - 10/09/98 DMC Revised Linux version.
-//------------------------------------------------------------------------------
-
-//************
-//* Includes *
-//************
-
-#include <linux/sched.h>
-#include "i2lib.h"
-
-
-//***********************
-//* Function Prototypes *
-//***********************
-static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int);
-static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int );
-static void i2StripFifo(i2eBordStrPtr);
-static void i2StuffFifoBypass(i2eBordStrPtr);
-static void i2StuffFifoFlow(i2eBordStrPtr);
-static void i2StuffFifoInline(i2eBordStrPtr);
-static int i2RetryFlushOutput(i2ChanStrPtr);
-
-// Not a documented part of the library routines (careful...) but the Diagnostic
-// i2diag.c finds them useful to help the throughput in certain limited
-// single-threaded operations.
-static void iiSendPendingMail(i2eBordStrPtr);
-static void serviceOutgoingFifo(i2eBordStrPtr);
-
-// Functions defined in ip2.c as part of interrupt handling
-static void do_input(struct work_struct *);
-static void do_status(struct work_struct *);
-
-//***************
-//* Debug  Data *
-//***************
-#ifdef DEBUG_FIFO
-
-unsigned char DBGBuf[0x4000];
-unsigned short I = 0;
-
-static void
-WriteDBGBuf(char *s, unsigned char *src, unsigned short n ) 
-{
-	char *p = src;
-
-	// XXX: We need a spin lock here if we ever use this again
-
-	while (*s) {	// copy label
-		DBGBuf[I] = *s++;
-		I = I++ & 0x3fff;
-	}
-	while (n--) {	// copy data
-		DBGBuf[I] = *p++;
-		I = I++ & 0x3fff;
-	}
-}
-
-static void
-fatality(i2eBordStrPtr pB )
-{
-	int i;
-
-	for (i=0;i<sizeof(DBGBuf);i++) {
-		if ((i%16) == 0)
-			printk("\n%4x:",i);
-		printk("%02x ",DBGBuf[i]);
-	}
-	printk("\n");
-	for (i=0;i<sizeof(DBGBuf);i++) {
-		if ((i%16) == 0)
-			printk("\n%4x:",i);
-		if (DBGBuf[i] >= ' ' && DBGBuf[i] <= '~') {
-			printk(" %c ",DBGBuf[i]);
-		} else {
-			printk(" . ");
-		}
-	}
-	printk("\n");
-	printk("Last index %x\n",I);
-}
-#endif /* DEBUG_FIFO */
-
-//********
-//* Code *
-//********
-
-static inline int
-i2Validate ( i2ChanStrPtr pCh )
-{
-	//ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity,
-	//	(CHANNEL_MAGIC | CHANNEL_SUPPORT));
-	return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT)) 
-			  == (CHANNEL_MAGIC | CHANNEL_SUPPORT));
-}
-
-static void iiSendPendingMail_t(unsigned long data)
-{
-	i2eBordStrPtr pB = (i2eBordStrPtr)data;
-
-	iiSendPendingMail(pB);
-}
-
-//******************************************************************************
-// Function:   iiSendPendingMail(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// If any outgoing mail bits are set and there is outgoing mailbox is empty,
-// send the mail and clear the bits.
-//******************************************************************************
-static void
-iiSendPendingMail(i2eBordStrPtr pB)
-{
-	if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) )
-	{
-		if (iiTrySendMail(pB, pB->i2eOutMailWaiting))
-		{
-			/* If we were already waiting for fifo to empty,
-			 * or just sent MB_OUT_STUFFED, then we are
-			 * still waiting for it to empty, until we should
-			 * receive an MB_IN_STRIPPED from the board.
-			 */
-			pB->i2eWaitingForEmptyFifo |=
-				(pB->i2eOutMailWaiting & MB_OUT_STUFFED);
-			pB->i2eOutMailWaiting = 0;
-			pB->SendPendingRetry = 0;
-		} else {
-/*		The only time we hit this area is when "iiTrySendMail" has
-		failed.  That only occurs when the outbound mailbox is
-		still busy with the last message.  We take a short breather
-		to let the board catch up with itself and then try again.
-		16 Retries is the limit - then we got a borked board.
-			/\/\|=mhw=|\/\/				*/
-
-			if( ++pB->SendPendingRetry < 16 ) {
-				setup_timer(&pB->SendPendingTimer,
-					iiSendPendingMail_t, (unsigned long)pB);
-				mod_timer(&pB->SendPendingTimer, jiffies + 1);
-			} else {
-				printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" );
-			}
-		}
-	}
-}
-
-//******************************************************************************
-// Function:   i2InitChannels(pB, nChannels, pCh)
-// Parameters: Pointer to Ellis Board structure
-//             Number of channels to initialize
-//             Pointer to first element in an array of channel structures
-// Returns:    Success or failure
-//
-// Description:
-//
-// This function patches pointers, back-pointers, and initializes all the
-// elements in the channel structure array.
-//
-// This should be run after the board structure is initialized, through having
-// loaded the standard loadware (otherwise it complains).
-//
-// In any case, it must be done before any serious work begins initializing the
-// irq's or sending commands...
-//
-//******************************************************************************
-static int
-i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
-{
-	int index, stuffIndex;
-	i2ChanStrPtr *ppCh;
-	
-	if (pB->i2eValid != I2E_MAGIC) {
-		I2_COMPLETE(pB, I2EE_BADMAGIC);
-	}
-	if (pB->i2eState != II_STATE_STDLOADED) {
-		I2_COMPLETE(pB, I2EE_BADSTATE);
-	}
-
-	rwlock_init(&pB->read_fifo_spinlock);
-	rwlock_init(&pB->write_fifo_spinlock);
-	rwlock_init(&pB->Dbuf_spinlock);
-	rwlock_init(&pB->Bbuf_spinlock);
-	rwlock_init(&pB->Fbuf_spinlock);
-	
-	// NO LOCK needed yet - this is init
-
-	pB->i2eChannelPtr = pCh;
-	pB->i2eChannelCnt = nChannels;
-
-	pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0;
-	pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0;
-	pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0;
-
-	pB->SendPendingRetry = 0;
-
-	memset ( pCh, 0, sizeof (i2ChanStr) * nChannels );
-
-	for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf);
-		  nChannels && index < ABS_MOST_PORTS;
-		  index++)
-	{
-		if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
-			continue;
-		}
-		rwlock_init(&pCh->Ibuf_spinlock);
-		rwlock_init(&pCh->Obuf_spinlock);
-		rwlock_init(&pCh->Cbuf_spinlock);
-		rwlock_init(&pCh->Pbuf_spinlock);
-		// NO LOCK needed yet - this is init
-		// Set up validity flag according to support level
-		if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
-			pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT;
-		} else {
-			pCh->validity = CHANNEL_MAGIC;
-		}
-		pCh->pMyBord = pB;      /* Back-pointer */
-
-		// Prepare an outgoing flow-control packet to send as soon as the chance
-		// occurs.
-		if ( pCh->validity & CHANNEL_SUPPORT ) {
-			pCh->infl.hd.i2sChannel = index;
-			pCh->infl.hd.i2sCount = 5;
-			pCh->infl.hd.i2sType = PTYPE_BYPASS;
-			pCh->infl.fcmd = 37;
-			pCh->infl.asof = 0;
-			pCh->infl.room = IBUF_SIZE - 1;
-
-			pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full
-
-		// The following is similar to calling i2QueueNeeds, except that this
-		// is done in longhand, since we are setting up initial conditions on
-		// many channels at once.
-			pCh->channelNeeds = NEED_FLOW;  // Since starting from scratch
-			pCh->sinceLastFlow = 0;         // No bytes received since last flow
-											// control packet was queued
-			stuffIndex++;
-			*ppCh++ = pCh;      // List this channel as needing
-								// initial flow control packet sent
-		}
-
-		// Don't allow anything to be sent until the status packets come in from
-		// the board.
-
-		pCh->outfl.asof = 0;
-		pCh->outfl.room = 0;
-
-		// Initialize all the ring buffers
-
-		pCh->Ibuf_stuff = pCh->Ibuf_strip = 0;
-		pCh->Obuf_stuff = pCh->Obuf_strip = 0;
-		pCh->Cbuf_stuff = pCh->Cbuf_strip = 0;
-
-		memset( &pCh->icount, 0, sizeof (struct async_icount) );
-		pCh->hotKeyIn       = HOT_CLEAR;
-		pCh->channelOptions = 0;
-		pCh->bookMarks      = 0;
-		init_waitqueue_head(&pCh->pBookmarkWait);
-
-		init_waitqueue_head(&pCh->open_wait);
-		init_waitqueue_head(&pCh->close_wait);
-		init_waitqueue_head(&pCh->delta_msr_wait);
-
-		// Set base and divisor so default custom rate is 9600
-		pCh->BaudBase    = 921600;	// MAX for ST654, changed after we get
-		pCh->BaudDivisor = 96;		// the boxids (UART types) later
-
-		pCh->dataSetIn   = 0;
-		pCh->dataSetOut  = 0;
-
-		pCh->wopen       = 0;
-		pCh->throttled   = 0;
-
-		pCh->speed       = CBR_9600;
-
-		pCh->flags    = 0;
-
-		pCh->ClosingDelay     = 5*HZ/10;
-		pCh->ClosingWaitTime  = 30*HZ;
-
-		// Initialize task queue objects
-		INIT_WORK(&pCh->tqueue_input, do_input);
-		INIT_WORK(&pCh->tqueue_status, do_status);
-
-#ifdef IP2DEBUG_TRACE
-		pCh->trace = ip2trace;
-#endif
-
-		++pCh;
-     	--nChannels;
-	}
-	// No need to check for wrap here; this is initialization.
-	pB->i2Fbuf_stuff = stuffIndex;
-	I2_COMPLETE(pB, I2EE_GOOD);
-
-}
-
-//******************************************************************************
-// Function:   i2DeQueueNeeds(pB, type)
-// Parameters: Pointer to a board structure
-//             type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
-// Returns:   
-//             Pointer to a channel structure
-//
-// Description: Returns pointer struct of next channel that needs service of
-//  the type specified. Otherwise returns a NULL reference.
-//
-//******************************************************************************
-static i2ChanStrPtr 
-i2DeQueueNeeds(i2eBordStrPtr pB, int type)
-{
-	unsigned short queueIndex;
-	unsigned long flags;
-
-	i2ChanStrPtr pCh = NULL;
-
-	switch(type) {
-
-	case  NEED_INLINE:
-
-		write_lock_irqsave(&pB->Dbuf_spinlock, flags);
-		if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
-		{
-			queueIndex = pB->i2Dbuf_strip;
-			pCh = pB->i2Dbuf[queueIndex];
-			queueIndex++;
-			if (queueIndex >= CH_QUEUE_SIZE) {
-				queueIndex = 0;
-			}
-			pB->i2Dbuf_strip = queueIndex;
-			pCh->channelNeeds &= ~NEED_INLINE;
-		}
-		write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
-		break;
-
-	case NEED_BYPASS:
-
-		write_lock_irqsave(&pB->Bbuf_spinlock, flags);
-		if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
-		{
-			queueIndex = pB->i2Bbuf_strip;
-			pCh = pB->i2Bbuf[queueIndex];
-			queueIndex++;
-			if (queueIndex >= CH_QUEUE_SIZE) {
-				queueIndex = 0;
-			}
-			pB->i2Bbuf_strip = queueIndex;
-			pCh->channelNeeds &= ~NEED_BYPASS;
-		}
-		write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
-		break;
-	
-	case NEED_FLOW:
-
-		write_lock_irqsave(&pB->Fbuf_spinlock, flags);
-		if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
-		{
-			queueIndex = pB->i2Fbuf_strip;
-			pCh = pB->i2Fbuf[queueIndex];
-			queueIndex++;
-			if (queueIndex >= CH_QUEUE_SIZE) {
-				queueIndex = 0;
-			}
-			pB->i2Fbuf_strip = queueIndex;
-			pCh->channelNeeds &= ~NEED_FLOW;
-		}
-		write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
-		break;
-	default:
-		printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
-		break;
-	}
-	return pCh;
-}
-
-//******************************************************************************
-// Function:   i2QueueNeeds(pB, pCh, type)
-// Parameters: Pointer to a board structure
-//             Pointer to a channel structure
-//             type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
-// Returns:    Nothing
-//
-// Description:
-// For each type of need selected, if the given channel is not already in the
-// queue, adds it, and sets the flag indicating it is in the queue.
-//******************************************************************************
-static void
-i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
-{
-	unsigned short queueIndex;
-	unsigned long flags;
-
-	// We turn off all the interrupts during this brief process, since the
-	// interrupt-level code might want to put things on the queue as well.
-
-	switch (type) {
-
-	case NEED_INLINE:
-
-		write_lock_irqsave(&pB->Dbuf_spinlock, flags);
-		if ( !(pCh->channelNeeds & NEED_INLINE) )
-		{
-			pCh->channelNeeds |= NEED_INLINE;
-			queueIndex = pB->i2Dbuf_stuff;
-			pB->i2Dbuf[queueIndex++] = pCh;
-			if (queueIndex >= CH_QUEUE_SIZE)
-				queueIndex = 0;
-			pB->i2Dbuf_stuff = queueIndex;
-		}
-		write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
-		break;
-
-	case NEED_BYPASS:
-
-		write_lock_irqsave(&pB->Bbuf_spinlock, flags);
-		if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
-		{
-			pCh->channelNeeds |= NEED_BYPASS;
-			queueIndex = pB->i2Bbuf_stuff;
-			pB->i2Bbuf[queueIndex++] = pCh;
-			if (queueIndex >= CH_QUEUE_SIZE)
-				queueIndex = 0;
-			pB->i2Bbuf_stuff = queueIndex;
-		} 
-		write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
-		break;
-
-	case NEED_FLOW:
-
-		write_lock_irqsave(&pB->Fbuf_spinlock, flags);
-		if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
-		{
-			pCh->channelNeeds |= NEED_FLOW;
-			queueIndex = pB->i2Fbuf_stuff;
-			pB->i2Fbuf[queueIndex++] = pCh;
-			if (queueIndex >= CH_QUEUE_SIZE)
-				queueIndex = 0;
-			pB->i2Fbuf_stuff = queueIndex;
-		}
-		write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
-		break;
-
-	case NEED_CREDIT:
-		pCh->channelNeeds |= NEED_CREDIT;
-		break;
-	default:
-		printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type);
-		break;
-	}
-	return;
-}
-
-//******************************************************************************
-// Function:   i2QueueCommands(type, pCh, timeout, nCommands, pCs,...)
-// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE
-//             pointer to the channel structure
-//             maximum period to wait
-//             number of commands (n)
-//             n commands
-// Returns:    Number of commands sent, or -1 for error
-//
-// get board lock before calling
-//
-// Description:
-// Queues up some commands to be sent to a channel. To send possibly several
-// bypass or inline commands to the given channel. The timeout parameter
-// indicates how many HUNDREDTHS OF SECONDS to wait until there is room:
-// 0 = return immediately if no room, -ive  = wait forever, +ive = number of
-// 1/100 seconds to wait. Return values:
-// -1 Some kind of nasty error: bad channel structure or invalid arguments.
-//  0 No room to send all the commands
-// (+)   Number of commands sent
-//******************************************************************************
-static int
-i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
-					 cmdSyntaxPtr pCs0,...)
-{
-	int totalsize = 0;
-	int blocksize;
-	int lastended;
-	cmdSyntaxPtr *ppCs;
-	cmdSyntaxPtr pCs;
-	int count;
-	int flag;
-	i2eBordStrPtr pB;
-
-	unsigned short maxBlock;
-	unsigned short maxBuff;
-	short bufroom;
-	unsigned short stuffIndex;
-	unsigned char *pBuf;
-	unsigned char *pInsert;
-	unsigned char *pDest, *pSource;
-	unsigned short channel;
-	int cnt;
-	unsigned long flags = 0;
-	rwlock_t *lock_var_p = NULL;
-
-	// Make sure the channel exists, otherwise do nothing
-	if ( !i2Validate ( pCh ) ) {
-		return -1;
-	}
-
-	ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 );
-
-	pB = pCh->pMyBord;
-
-	// Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
-	if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED)
-		return -2;
-	// If the board has gone fatal, return bad, and also hit the trap routine if
-	// it exists.
-	if (pB->i2eFatal) {
-		if ( pB->i2eFatalTrap ) {
-			(*(pB)->i2eFatalTrap)(pB);
-		}
-		return -3;
-	}
-	// Set up some variables, Which buffers are we using?  How big are they?
-	switch(type)
-	{
-	case PTYPE_INLINE:
-		flag = INL;
-		maxBlock = MAX_OBUF_BLOCK;
-		maxBuff = OBUF_SIZE;
-		pBuf = pCh->Obuf;
-		break;
-	case PTYPE_BYPASS:
-		flag = BYP;
-		maxBlock = MAX_CBUF_BLOCK;
-		maxBuff = CBUF_SIZE;
-		pBuf = pCh->Cbuf;
-		break;
-	default:
-		return -4;
-	}
-	// Determine the total size required for all the commands
-	totalsize = blocksize = sizeof(i2CmdHeader);
-	lastended = 0;
-	ppCs = &pCs0;
-	for ( count = nCommands; count; count--, ppCs++)
-	{
-		pCs = *ppCs;
-		cnt = pCs->length;
-		// Will a new block be needed for this one? 
-		// Two possible reasons: too
-		// big or previous command has to be at the end of a packet.
-		if ((blocksize + cnt > maxBlock) || lastended) {
-			blocksize = sizeof(i2CmdHeader);
-			totalsize += sizeof(i2CmdHeader);
-		}
-		totalsize += cnt;
-		blocksize += cnt;
-
-		// If this command had to end a block, then we will make sure to
-		// account for it should there be any more blocks.
-		lastended = pCs->flags & END;
-	}
-	for (;;) {
-		// Make sure any pending flush commands go out before we add more data.
-		if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) {
-			// How much room (this time through) ?
-			switch(type) {
-			case PTYPE_INLINE:
-				lock_var_p = &pCh->Obuf_spinlock;
-				write_lock_irqsave(lock_var_p, flags);
-				stuffIndex = pCh->Obuf_stuff;
-				bufroom = pCh->Obuf_strip - stuffIndex;
-				break;
-			case PTYPE_BYPASS:
-				lock_var_p = &pCh->Cbuf_spinlock;
-				write_lock_irqsave(lock_var_p, flags);
-				stuffIndex = pCh->Cbuf_stuff;
-				bufroom = pCh->Cbuf_strip - stuffIndex;
-				break;
-			default:
-				return -5;
-			}
-			if (--bufroom < 0) {
-				bufroom += maxBuff;
-			}
-
-			ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom );
-
-			// Check for overflow
-			if (totalsize <= bufroom) {
-				// Normal Expected path - We still hold LOCK
-				break; /* from for()- Enough room: goto proceed */
-			}
-			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
-			write_unlock_irqrestore(lock_var_p, flags);
-		} else
-			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
-
-		/* Prepare to wait for buffers to empty */
-		serviceOutgoingFifo(pB);	// Dump what we got
-
-		if (timeout == 0) {
-			return 0;   // Tired of waiting
-		}
-		if (timeout > 0)
-			timeout--;   // So negative values == forever
-		
-		if (!in_interrupt()) {
-			schedule_timeout_interruptible(1);	// short nap
-		} else {
-			// we cannot sched/sleep in interrupt silly
-			return 0;   
-		}
-		if (signal_pending(current)) {
-			return 0;   // Wake up! Time to die!!!
-		}
-
-		ip2trace (CHANN, ITRC_QUEUE, 4, 0 );
-
-	}	// end of for(;;)
-
-	// At this point we have room and the lock - stick them in.
-	channel = pCh->infl.hd.i2sChannel;
-	pInsert = &pBuf[stuffIndex];     // Pointer to start of packet
-	pDest = CMD_OF(pInsert);         // Pointer to start of command
-
-	// When we start counting, the block is the size of the header
-	for (blocksize = sizeof(i2CmdHeader), count = nCommands,
-			lastended = 0, ppCs = &pCs0;
-		count;
-		count--, ppCs++)
-	{
-		pCs = *ppCs;         // Points to command protocol structure
-
-		// If this is a bookmark request command, post the fact that a bookmark
-		// request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ
-		// has no parameters!  The more general solution would be to reference
-		// pCs->cmd[0].
-		if (pCs == CMD_BMARK_REQ) {
-			pCh->bookMarks++;
-
-			ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks );
-
-		}
-		cnt = pCs->length;
-
-		// If this command would put us over the maximum block size or 
-		// if the last command had to be at the end of a block, we end
-		// the existing block here and start a new one.
-		if ((blocksize + cnt > maxBlock) || lastended) {
-
-			ip2trace (CHANN, ITRC_QUEUE, 5, 0 );
-
-			PTYPE_OF(pInsert) = type;
-			CHANNEL_OF(pInsert) = channel;
-			// count here does not include the header
-			CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
-			stuffIndex += blocksize;
-			if(stuffIndex >= maxBuff) {
-				stuffIndex = 0;
-				pInsert = pBuf;
-			}
-			pInsert = &pBuf[stuffIndex];  // Pointer to start of next pkt
-			pDest = CMD_OF(pInsert);
-			blocksize = sizeof(i2CmdHeader);
-		}
-		// Now we know there is room for this one in the current block
-
-		blocksize += cnt;       // Total bytes in this command
-		pSource = pCs->cmd;     // Copy the command into the buffer
-		while (cnt--) {
-			*pDest++ = *pSource++;
-		}
-		// If this command had to end a block, then we will make sure to account
-		// for it should there be any more blocks.
-		lastended = pCs->flags & END;
-	}	// end for
-	// Clean up the final block by writing header, etc
-
-	PTYPE_OF(pInsert) = type;
-	CHANNEL_OF(pInsert) = channel;
-	// count here does not include the header
-	CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
-	stuffIndex += blocksize;
-	if(stuffIndex >= maxBuff) {
-		stuffIndex = 0;
-		pInsert = pBuf;
-	}
-	// Updates the index, and post the need for service. When adding these to
-	// the queue of channels, we turn off the interrupt while doing so,
-	// because at interrupt level we might want to push a channel back to the
-	// end of the queue.
-	switch(type)
-	{
-	case PTYPE_INLINE:
-		pCh->Obuf_stuff = stuffIndex;  // Store buffer pointer
-		write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
-		pB->debugInlineQueued++;
-		// Add the channel pointer to list of channels needing service (first
-		// come...), if it's not already there.
-		i2QueueNeeds(pB, pCh, NEED_INLINE);
-		break;
-
-	case PTYPE_BYPASS:
-		pCh->Cbuf_stuff = stuffIndex;  // Store buffer pointer
-		write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
-
-		pB->debugBypassQueued++;
-		// Add the channel pointer to list of channels needing service (first
-		// come...), if it's not already there.
-		i2QueueNeeds(pB, pCh, NEED_BYPASS);
-		break;
-	}
-
-	ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands );
-
-	return nCommands; // Good status: number of commands sent
-}
-
-//******************************************************************************
-// Function:   i2GetStatus(pCh,resetBits)
-// Parameters: Pointer to a channel structure
-//             Bit map of status bits to clear
-// Returns:    Bit map of current status bits
-//
-// Description:
-// Returns the state of data set signals, and whether a break has been received,
-// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status
-// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared
-// AFTER the condition is passed. If pCh does not point to a valid channel,
-// returns -1 (which would be impossible otherwise.
-//******************************************************************************
-static int
-i2GetStatus(i2ChanStrPtr pCh, int resetBits)
-{
-	unsigned short status;
-	i2eBordStrPtr pB;
-
-	ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits );
-
-	// Make sure the channel exists, otherwise do nothing */
-	if ( !i2Validate ( pCh ) )
-		return -1;
-
-	pB = pCh->pMyBord;
-
-	status = pCh->dataSetIn;
-
-	// Clear any specified error bits: but note that only actual error bits can
-	// be cleared, regardless of the value passed.
-	if (resetBits)
-	{
-		pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR));
-		pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI);
-	}
-
-	ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn );
-
-	return status;
-}
-
-//******************************************************************************
-// Function:   i2Input(pChpDest,count)
-// Parameters: Pointer to a channel structure
-//             Pointer to data buffer
-//             Number of bytes to read
-// Returns:    Number of bytes read, or -1 for error
-//
-// Description:
-// Strips data from the input buffer and writes it to pDest. If there is a
-// collosal blunder, (invalid structure pointers or the like), returns -1.
-// Otherwise, returns the number of bytes read.
-//******************************************************************************
-static int
-i2Input(i2ChanStrPtr pCh)
-{
-	int amountToMove;
-	unsigned short stripIndex;
-	int count;
-	unsigned long flags = 0;
-
-	ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0);
-
-	// Ensure channel structure seems real
-	if ( !i2Validate( pCh ) ) {
-		count = -1;
-		goto i2Input_exit;
-	}
-	write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-
-	// initialize some accelerators and private copies
-	stripIndex = pCh->Ibuf_strip;
-
-	count = pCh->Ibuf_stuff - stripIndex;
-
-	// If buffer is empty or requested data count was 0, (trivial case) return
-	// without any further thought.
-	if ( count == 0 ) {
-		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-		goto i2Input_exit;
-	}
-	// Adjust for buffer wrap
-	if ( count < 0 ) {
-		count += IBUF_SIZE;
-	}
-	// Don't give more than can be taken by the line discipline
-	amountToMove = pCh->pTTY->receive_room;
-	if (count > amountToMove) {
-		count = amountToMove;
-	}
-	// How much could we copy without a wrap?
-	amountToMove = IBUF_SIZE - stripIndex;
-
-	if (amountToMove > count) {
-		amountToMove = count;
-	}
-	// Move the first block
-	pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
-		 &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
-	// If we needed to wrap, do the second data move
-	if (count > amountToMove) {
-		pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
-		 pCh->Ibuf, NULL, count - amountToMove );
-	}
-	// Bump and wrap the stripIndex all at once by the amount of data read. This
-	// method is good regardless of whether the data was in one or two pieces.
-	stripIndex += count;
-	if (stripIndex >= IBUF_SIZE) {
-		stripIndex -= IBUF_SIZE;
-	}
-	pCh->Ibuf_strip = stripIndex;
-
-	// Update our flow control information and possibly queue ourselves to send
-	// it, depending on how much data has been stripped since the last time a
-	// packet was sent.
-	pCh->infl.asof += count;
-
-	if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
-		pCh->sinceLastFlow -= pCh->whenSendFlow;
-		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-		i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
-	} else {
-		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-	}
-
-i2Input_exit:
-
-	ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count);
-
-	return count;
-}
-
-//******************************************************************************
-// Function:   i2InputFlush(pCh)
-// Parameters: Pointer to a channel structure
-// Returns:    Number of bytes stripped, or -1 for error
-//
-// Description:
-// Strips any data from the input buffer. If there is a collosal blunder,
-// (invalid structure pointers or the like), returns -1. Otherwise, returns the
-// number of bytes stripped.
-//******************************************************************************
-static int
-i2InputFlush(i2ChanStrPtr pCh)
-{
-	int count;
-	unsigned long flags;
-
-	// Ensure channel structure seems real
-	if ( !i2Validate ( pCh ) )
-		return -1;
-
-	ip2trace (CHANN, ITRC_INPUT, 10, 0);
-
-	write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-	count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
-
-	// Adjust for buffer wrap
-	if (count < 0) {
-		count += IBUF_SIZE;
-	}
-
-	// Expedient way to zero out the buffer
-	pCh->Ibuf_strip = pCh->Ibuf_stuff;
-
-
-	// Update our flow control information and possibly queue ourselves to send
-	// it, depending on how much data has been stripped since the last time a
-	// packet was sent.
-
-	pCh->infl.asof += count;
-
-	if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
-	{
-		pCh->sinceLastFlow -= pCh->whenSendFlow;
-		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-		i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
-	} else {
-		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-	}
-
-	ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
-
-	return count;
-}
-
-//******************************************************************************
-// Function:   i2InputAvailable(pCh)
-// Parameters: Pointer to a channel structure
-// Returns:    Number of bytes available, or -1 for error
-//
-// Description:
-// If there is a collosal blunder, (invalid structure pointers or the like),
-// returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
-// returns the number of bytes available in the buffer.
-//******************************************************************************
-#if 0
-static int
-i2InputAvailable(i2ChanStrPtr pCh)
-{
-	int count;
-
-	// Ensure channel structure seems real
-	if ( !i2Validate ( pCh ) ) return -1;
-
-
-	// initialize some accelerators and private copies
-	read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-	count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
-	read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-
-	// Adjust for buffer wrap
-	if (count < 0)
-	{
-		count += IBUF_SIZE;
-	}
-
-	return count;
-}
-#endif 
-
-//******************************************************************************
-// Function:   i2Output(pCh, pSource, count)
-// Parameters: Pointer to channel structure
-//             Pointer to source data
-//             Number of bytes to send
-// Returns:    Number of bytes sent, or -1 for error
-//
-// Description:
-// Queues the data at pSource to be sent as data packets to the board. If there
-// is a collosal blunder, (invalid structure pointers or the like), returns -1.
-// Otherwise, returns the number of bytes written. What if there is not enough
-// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
-// we transfer as many characters as we can now, then return. If this bit is
-// clear (default), routine will spin along until all the data is buffered.
-// Should this occur, the 1-ms delay routine is called while waiting to avoid
-// applications that one cannot break out of.
-//******************************************************************************
-static int
-i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
-{
-	i2eBordStrPtr pB;
-	unsigned char *pInsert;
-	int amountToMove;
-	int countOriginal = count;
-	unsigned short channel;
-	unsigned short stuffIndex;
-	unsigned long flags;
-
-	int bailout = 10;
-
-	ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 );
-
-	// Ensure channel structure seems real
-	if ( !i2Validate ( pCh ) ) 
-		return -1;
-
-	// initialize some accelerators and private copies
-	pB = pCh->pMyBord;
-	channel = pCh->infl.hd.i2sChannel;
-
-	// If the board has gone fatal, return bad, and also hit the trap routine if
-	// it exists.
-	if (pB->i2eFatal) {
-		if (pB->i2eFatalTrap) {
-			(*(pB)->i2eFatalTrap)(pB);
-		}
-		return -1;
-	}
-	// Proceed as though we would do everything
-	while ( count > 0 ) {
-
-		// How much room in output buffer is there?
-		read_lock_irqsave(&pCh->Obuf_spinlock, flags);
-		amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
-		read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-		if (amountToMove < 0) {
-			amountToMove += OBUF_SIZE;
-		}
-		// Subtract off the headers size and see how much room there is for real
-		// data. If this is negative, we will discover later.
-		amountToMove -= sizeof (i2DataHeader);
-
-		// Don't move more (now) than can go in a single packet
-		if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) {
-			amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader);
-		}
-		// Don't move more than the count we were given
-		if (amountToMove > count) {
-			amountToMove = count;
-		}
-		// Now we know how much we must move: NB because the ring buffers have
-		// an overflow area at the end, we needn't worry about wrapping in the
-		// middle of a packet.
-
-// Small WINDOW here with no LOCK but I can't call Flush with LOCK
-// We would be flushing (or ending flush) anyway
-
-		ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove );
-
-		if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) ) 
-				&& amountToMove > 0 )
-		{
-			write_lock_irqsave(&pCh->Obuf_spinlock, flags);
-			stuffIndex = pCh->Obuf_stuff;
-      
-			// Had room to move some data: don't know whether the block size,
-			// buffer space, or what was the limiting factor...
-			pInsert = &(pCh->Obuf[stuffIndex]);
-
-			// Set up the header
-			CHANNEL_OF(pInsert)     = channel;
-			PTYPE_OF(pInsert)       = PTYPE_DATA;
-			TAG_OF(pInsert)         = 0;
-			ID_OF(pInsert)          = ID_ORDINARY_DATA;
-			DATA_COUNT_OF(pInsert)  = amountToMove;
-
-			// Move the data
-			memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove );
-			// Adjust pointers and indices
-			pSource					+= amountToMove;
-			pCh->Obuf_char_count	+= amountToMove;
-			stuffIndex 				+= amountToMove + sizeof(i2DataHeader);
-			count 					-= amountToMove;
-
-			if (stuffIndex >= OBUF_SIZE) {
-				stuffIndex = 0;
-			}
-			pCh->Obuf_stuff = stuffIndex;
-
-			write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
-			ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
-
-		} else {
-
-			// Cannot move data
-			// becuz we need to stuff a flush 
-			// or amount to move is <= 0
-
-			ip2trace(CHANN, ITRC_OUTPUT, 14, 3,
-				amountToMove,  pB->i2eFifoRemains,
-				pB->i2eWaitingForEmptyFifo );
-
-			// Put this channel back on queue
-			// this ultimatly gets more data or wakes write output
-			i2QueueNeeds(pB, pCh, NEED_INLINE);
-
-			if ( pB->i2eWaitingForEmptyFifo ) {
-
-				ip2trace (CHANN, ITRC_OUTPUT, 16, 0 );
-
-				// or schedule
-				if (!in_interrupt()) {
-
-					ip2trace (CHANN, ITRC_OUTPUT, 61, 0 );
-
-					schedule_timeout_interruptible(2);
-					if (signal_pending(current)) {
-						break;
-					}
-					continue;
-				} else {
-
-					ip2trace (CHANN, ITRC_OUTPUT, 62, 0 );
-
-					// let interrupt in = WAS restore_flags()
-					// We hold no lock nor is irq off anymore???
-					
-					break;
-				}
-				break;   // from while(count)
-			}
-			else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) )
-			{
-				ip2trace (CHANN, ITRC_OUTPUT, 19, 2,
-					pB->i2eFifoRemains,
-					pB->i2eTxMailEmpty );
-
-				break;   // from while(count)
-			} else if ( pCh->channelNeeds & NEED_CREDIT ) {
-
-				ip2trace (CHANN, ITRC_OUTPUT, 22, 0 );
-
-				break;   // from while(count)
-			} else if ( --bailout) {
-
-				// Try to throw more things (maybe not us) in the fifo if we're
-				// not already waiting for it.
-	
-				ip2trace (CHANN, ITRC_OUTPUT, 20, 0 );
-
-				serviceOutgoingFifo(pB);
-				//break;  CONTINUE;
-			} else {
-				ip2trace (CHANN, ITRC_OUTPUT, 21, 3,
-					pB->i2eFifoRemains,
-					pB->i2eOutMailWaiting,
-					pB->i2eWaitingForEmptyFifo );
-
-				break;   // from while(count)
-			}
-		}
-	} // End of while(count)
-
-	i2QueueNeeds(pB, pCh, NEED_INLINE);
-
-	// We drop through either when the count expires, or when there is some
-	// count left, but there was a non-blocking write.
-	if (countOriginal > count) {
-
-		ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count );
-
-		serviceOutgoingFifo( pB );
-	}
-
-	ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count );
-
-	return countOriginal - count;
-}
-
-//******************************************************************************
-// Function:   i2FlushOutput(pCh)
-// Parameters: Pointer to a channel structure
-// Returns:    Nothing
-//
-// Description:
-// Sends bypass command to start flushing (waiting possibly forever until there
-// is room), then sends inline command to stop flushing output, (again waiting
-// possibly forever).
-//******************************************************************************
-static inline void
-i2FlushOutput(i2ChanStrPtr pCh)
-{
-
-	ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags );
-
-	if (pCh->flush_flags)
-		return;
-
-	if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
-		pCh->flush_flags = STARTFL_FLAG;		// Failed - flag for later
-
-		ip2trace (CHANN, ITRC_FLUSH, 2, 0 );
-
-	} else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) {
-		pCh->flush_flags = STOPFL_FLAG;		// Failed - flag for later
-
-		ip2trace (CHANN, ITRC_FLUSH, 3, 0 );
-	}
-}
-
-static int 
-i2RetryFlushOutput(i2ChanStrPtr pCh)
-{
-	int old_flags = pCh->flush_flags;
-
-	ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags );
-
-	pCh->flush_flags = 0;	// Clear flag so we can avoid recursion
-									// and queue the commands
-
-	if ( old_flags & STARTFL_FLAG ) {
-		if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
-			old_flags = STOPFL_FLAG;	//Success - send stop flush
-		} else {
-			old_flags = STARTFL_FLAG;	//Failure - Flag for retry later
-		}
-
-		ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags );
-
-	}
-	if ( old_flags & STOPFL_FLAG ) {
-		if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) {
-			old_flags = 0;	// Success - clear flags
-		}
-
-		ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags );
-	}
-	pCh->flush_flags = old_flags;
-
-	ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags );
-
-	return old_flags;
-}
-
-//******************************************************************************
-// Function:   i2DrainOutput(pCh,timeout)
-// Parameters: Pointer to a channel structure
-//             Maximum period to wait
-// Returns:    ?
-//
-// Description:
-// Uses the bookmark request command to ask the board to send a bookmark back as
-// soon as all the data is completely sent.
-//******************************************************************************
-static void
-i2DrainWakeup(unsigned long d)
-{
-	i2ChanStrPtr pCh = (i2ChanStrPtr)d;
-
-	ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires );
-
-	pCh->BookmarkTimer.expires = 0;
-	wake_up_interruptible( &pCh->pBookmarkWait );
-}
-
-static void
-i2DrainOutput(i2ChanStrPtr pCh, int timeout)
-{
-	wait_queue_t wait;
-	i2eBordStrPtr pB;
-
-	ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires);
-
-	pB = pCh->pMyBord;
-	// If the board has gone fatal, return bad, 
-	// and also hit the trap routine if it exists.
-	if (pB->i2eFatal) {
-		if (pB->i2eFatalTrap) {
-			(*(pB)->i2eFatalTrap)(pB);
-		}
-		return;
-	}
-	if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) {
-		// One per customer (channel)
-		setup_timer(&pCh->BookmarkTimer, i2DrainWakeup,
-				(unsigned long)pCh);
-
-		ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires );
-
-		mod_timer(&pCh->BookmarkTimer, jiffies + timeout);
-	}
-	
-	i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ );
-
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&(pCh->pBookmarkWait), &wait);
-	set_current_state( TASK_INTERRUPTIBLE );
-
-	serviceOutgoingFifo( pB );
-	
-	schedule();	// Now we take our interruptible sleep on
-
-	// Clean up the queue
-	set_current_state( TASK_RUNNING );
-	remove_wait_queue(&(pCh->pBookmarkWait), &wait);
-
-	// if expires == 0 then timer poped, then do not need to del_timer
-	if ((timeout > 0) && pCh->BookmarkTimer.expires && 
-	                     time_before(jiffies, pCh->BookmarkTimer.expires)) {
-		del_timer( &(pCh->BookmarkTimer) );
-		pCh->BookmarkTimer.expires = 0;
-
-		ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires );
-
-	}
-	ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires );
-	return;
-}
-
-//******************************************************************************
-// Function:   i2OutputFree(pCh)
-// Parameters: Pointer to a channel structure
-// Returns:    Space in output buffer
-//
-// Description:
-// Returns -1 if very gross error. Otherwise returns the amount of bytes still
-// free in the output buffer.
-//******************************************************************************
-static int
-i2OutputFree(i2ChanStrPtr pCh)
-{
-	int amountToMove;
-	unsigned long flags;
-
-	// Ensure channel structure seems real
-	if ( !i2Validate ( pCh ) ) {
-		return -1;
-	}
-	read_lock_irqsave(&pCh->Obuf_spinlock, flags);
-	amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
-	read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
-	if (amountToMove < 0) {
-		amountToMove += OBUF_SIZE;
-	}
-	// If this is negative, we will discover later
-	amountToMove -= sizeof(i2DataHeader);
-
-	return (amountToMove < 0) ? 0 : amountToMove;
-}
-static void
-
-ip2_owake( PTTY tp)
-{
-	i2ChanStrPtr  pCh;
-
-	if (tp == NULL) return;
-
-	pCh = tp->driver_data;
-
-	ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags,
-			(1 << TTY_DO_WRITE_WAKEUP) );
-
-	tty_wakeup(tp);
-}
-
-static inline void
-set_baud_params(i2eBordStrPtr pB) 
-{
-	int i,j;
-	i2ChanStrPtr  *pCh;
-
-	pCh = (i2ChanStrPtr *) pB->i2eChannelPtr;
-
-	for (i = 0; i < ABS_MAX_BOXES; i++) {
-		if (pB->channelBtypes.bid_value[i]) {
-			if (BID_HAS_654(pB->channelBtypes.bid_value[i])) {
-				for (j = 0; j < ABS_BIGGEST_BOX; j++) {
-					if (pCh[i*16+j] == NULL)
-						break;
-					(pCh[i*16+j])->BaudBase    = 921600;	// MAX for ST654
-					(pCh[i*16+j])->BaudDivisor = 96;
-				}
-			} else {	// has cirrus cd1400
-				for (j = 0; j < ABS_BIGGEST_BOX; j++) {
-					if (pCh[i*16+j] == NULL)
-						break;
-					(pCh[i*16+j])->BaudBase    = 115200;	// MAX for CD1400
-					(pCh[i*16+j])->BaudDivisor = 12;
-				}
-			}
-		}
-	}
-}
-
-//******************************************************************************
-// Function:   i2StripFifo(pB)
-// Parameters: Pointer to a board structure
-// Returns:    ?
-//
-// Description:
-// Strips all the available data from the incoming FIFO, identifies the type of
-// packet, and either buffers the data or does what needs to be done.
-//
-// Note there is no overflow checking here: if the board sends more data than it
-// ought to, we will not detect it here, but blindly overflow...
-//******************************************************************************
-
-// A buffer for reading in blocks for unknown channels
-static unsigned char junkBuffer[IBUF_SIZE];
-
-// A buffer to read in a status packet. Because of the size of the count field
-// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE
-static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4];
-
-// This table changes the bit order from MSR order given by STAT_MODEM packet to
-// status bits used in our library.
-static char xlatDss[16] = {
-0      | 0     | 0      | 0      ,
-0      | 0     | 0      | I2_CTS ,
-0      | 0     | I2_DSR | 0      ,
-0      | 0     | I2_DSR | I2_CTS ,
-0      | I2_RI | 0      | 0      ,
-0      | I2_RI | 0      | I2_CTS ,
-0      | I2_RI | I2_DSR | 0      ,
-0      | I2_RI | I2_DSR | I2_CTS ,
-I2_DCD | 0     | 0      | 0      ,
-I2_DCD | 0     | 0      | I2_CTS ,
-I2_DCD | 0     | I2_DSR | 0      ,
-I2_DCD | 0     | I2_DSR | I2_CTS ,
-I2_DCD | I2_RI | 0      | 0      ,
-I2_DCD | I2_RI | 0      | I2_CTS ,
-I2_DCD | I2_RI | I2_DSR | 0      ,
-I2_DCD | I2_RI | I2_DSR | I2_CTS };
-
-static inline void
-i2StripFifo(i2eBordStrPtr pB)
-{
-	i2ChanStrPtr pCh;
-	int channel;
-	int count;
-	unsigned short stuffIndex;
-	int amountToRead;
-	unsigned char *pc, *pcLimit;
-	unsigned char uc;
-	unsigned char dss_change;
-	unsigned long bflags,cflags;
-
-//	ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
-
-	while (I2_HAS_INPUT(pB)) {
-//		ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
-
-		// Process packet from fifo a one atomic unit
-		write_lock_irqsave(&pB->read_fifo_spinlock, bflags);
-   
-		// The first word (or two bytes) will have channel number and type of
-		// packet, possibly other information
-		pB->i2eLeadoffWord[0] = iiReadWord(pB);
-
-		switch(PTYPE_OF(pB->i2eLeadoffWord))
-		{
-		case PTYPE_DATA:
-			pB->got_input = 1;
-
-//			ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 );
-
-			channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */
-			count = iiReadWord(pB);          /* Count is in the next word */
-
-// NEW: Check the count for sanity! Should the hardware fail, our death
-// is more pleasant. While an oversize channel is acceptable (just more
-// than the driver supports), an over-length count clearly means we are
-// sick!
-			if ( ((unsigned int)count) > IBUF_SIZE ) {
-				pB->i2eFatal = 2;
-				write_unlock_irqrestore(&pB->read_fifo_spinlock,
-						bflags);
-				return;     /* Bail out ASAP */
-			}
-			// Channel is illegally big ?
-			if ((channel >= pB->i2eChannelCnt) ||
-				(NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
-			{
-				iiReadBuf(pB, junkBuffer, count);
-				write_unlock_irqrestore(&pB->read_fifo_spinlock,
-						bflags);
-				break;         /* From switch: ready for next packet */
-			}
-
-			// Channel should be valid, then
-
-			// If this is a hot-key, merely post its receipt for now. These are
-			// always supposed to be 1-byte packets, so we won't even check the
-			// count. Also we will post an acknowledgement to the board so that
-			// more data can be forthcoming. Note that we are not trying to use
-			// these sequences in this driver, merely to robustly ignore them.
-			if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
-			{
-				pCh->hotKeyIn = iiReadWord(pB) & 0xff;
-				write_unlock_irqrestore(&pB->read_fifo_spinlock,
-						bflags);
-				i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
-				break;   /* From the switch: ready for next packet */
-			}
-
-			// Normal data! We crudely assume there is room for the data in our
-			// buffer because the board wouldn't have exceeded his credit limit.
-			write_lock_irqsave(&pCh->Ibuf_spinlock, cflags);
-													// We have 2 locks now
-			stuffIndex = pCh->Ibuf_stuff;
-			amountToRead = IBUF_SIZE - stuffIndex;
-			if (amountToRead > count)
-				amountToRead = count;
-
-			// stuffIndex would have been already adjusted so there would 
-			// always be room for at least one, and count is always at least
-			// one.
-
-			iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
-			pCh->icount.rx += amountToRead;
-
-			// Update the stuffIndex by the amount of data moved. Note we could
-			// never ask for more data than would just fit. However, we might
-			// have read in one more byte than we wanted because the read
-			// rounds up to even bytes. If this byte is on the end of the
-			// packet, and is padding, we ignore it. If the byte is part of
-			// the actual data, we need to move it.
-
-			stuffIndex += amountToRead;
-
-			if (stuffIndex >= IBUF_SIZE) {
-				if ((amountToRead & 1) && (count > amountToRead)) {
-					pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE];
-					amountToRead++;
-					stuffIndex = 1;
-				} else {
-					stuffIndex = 0;
-				}
-			}
-
-			// If there is anything left over, read it as well
-			if (count > amountToRead) {
-				amountToRead = count - amountToRead;
-				iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
-				pCh->icount.rx += amountToRead;
-				stuffIndex += amountToRead;
-			}
-
-			// Update stuff index
-			pCh->Ibuf_stuff = stuffIndex;
-			write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags);
-			write_unlock_irqrestore(&pB->read_fifo_spinlock,
-					bflags);
-
-#ifdef USE_IQ
-			schedule_work(&pCh->tqueue_input);
-#else
-			do_input(&pCh->tqueue_input);
-#endif
-
-			// Note we do not need to maintain any flow-control credits at this
-			// time:  if we were to increment .asof and decrement .room, there
-			// would be no net effect. Instead, when we strip data, we will
-			// increment .asof and leave .room unchanged.
-
-			break;   // From switch: ready for next packet
-
-		case PTYPE_STATUS:
-			ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 );
-      
-			count = CMD_COUNT_OF(pB->i2eLeadoffWord);
-
-			iiReadBuf(pB, cmdBuffer, count);
-			// We can release early with buffer grab
-			write_unlock_irqrestore(&pB->read_fifo_spinlock,
-					bflags);
-
-			pc = cmdBuffer;
-			pcLimit = &(cmdBuffer[count]);
-
-			while (pc < pcLimit) {
-				channel = *pc++;
-
-				ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc );
-
-				/* check for valid channel */
-				if (channel < pB->i2eChannelCnt
-					 && 
-					 (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL
-					)
-				{
-					dss_change = 0;
-
-					switch (uc = *pc++)
-					{
-					/* Breaks and modem signals are easy: just update status */
-					case STAT_CTS_UP:
-						if ( !(pCh->dataSetIn & I2_CTS) )
-						{
-							pCh->dataSetIn |= I2_DCTS;
-							pCh->icount.cts++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn |= I2_CTS;
-						break;
-
-					case STAT_CTS_DN:
-						if ( pCh->dataSetIn & I2_CTS )
-						{
-							pCh->dataSetIn |= I2_DCTS;
-							pCh->icount.cts++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn &= ~I2_CTS;
-						break;
-
-					case STAT_DCD_UP:
-						ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn );
-
-						if ( !(pCh->dataSetIn & I2_DCD) )
-						{
-							ip2trace (CHANN, ITRC_MODEM, 2, 0 );
-							pCh->dataSetIn |= I2_DDCD;
-							pCh->icount.dcd++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn |= I2_DCD;
-
-						ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn );
-						break;
-
-					case STAT_DCD_DN:
-						ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn );
-						if ( pCh->dataSetIn & I2_DCD )
-						{
-							ip2trace (channel, ITRC_MODEM, 5, 0 );
-							pCh->dataSetIn |= I2_DDCD;
-							pCh->icount.dcd++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn &= ~I2_DCD;
-
-						ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn );
-						break;
-
-					case STAT_DSR_UP:
-						if ( !(pCh->dataSetIn & I2_DSR) )
-						{
-							pCh->dataSetIn |= I2_DDSR;
-							pCh->icount.dsr++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn |= I2_DSR;
-						break;
-
-					case STAT_DSR_DN:
-						if ( pCh->dataSetIn & I2_DSR )
-						{
-							pCh->dataSetIn |= I2_DDSR;
-							pCh->icount.dsr++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn &= ~I2_DSR;
-						break;
-
-					case STAT_RI_UP:
-						if ( !(pCh->dataSetIn & I2_RI) )
-						{
-							pCh->dataSetIn |= I2_DRI;
-							pCh->icount.rng++;
-							dss_change = 1;
-						}
-						pCh->dataSetIn |= I2_RI ;
-						break;
-
-					case STAT_RI_DN:
-						// to be compat with serial.c
-						//if ( pCh->dataSetIn & I2_RI )
-						//{
-						//	pCh->dataSetIn |= I2_DRI;
-						//	pCh->icount.rng++; 
-						//	dss_change = 1;
-						//}
-						pCh->dataSetIn &= ~I2_RI ;
-						break;
-
-					case STAT_BRK_DET:
-						pCh->dataSetIn |= I2_BRK;
-						pCh->icount.brk++;
-						dss_change = 1;
-						break;
-
-					// Bookmarks? one less request we're waiting for
-					case STAT_BMARK:
-						pCh->bookMarks--;
-						if (pCh->bookMarks <= 0 ) {
-							pCh->bookMarks = 0;
-							wake_up_interruptible( &pCh->pBookmarkWait );
-
-						ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires );
-						}
-						break;
-
-					// Flow control packets? Update the new credits, and if
-					// someone was waiting for output, queue him up again.
-					case STAT_FLOW:
-						pCh->outfl.room =
-							((flowStatPtr)pc)->room -
-							(pCh->outfl.asof - ((flowStatPtr)pc)->asof);
-
-						ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room );
-
-						if (pCh->channelNeeds & NEED_CREDIT)
-						{
-							ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds);
-
-							pCh->channelNeeds &= ~NEED_CREDIT;
-							i2QueueNeeds(pB, pCh, NEED_INLINE);
-							if ( pCh->pTTY )
-								ip2_owake(pCh->pTTY);
-						}
-
-						ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds);
-
-						pc += sizeof(flowStat);
-						break;
-
-					/* Special packets: */
-					/* Just copy the information into the channel structure */
-
-					case STAT_STATUS:
-
-						pCh->channelStatus = *((debugStatPtr)pc);
-						pc += sizeof(debugStat);
-						break;
-
-					case STAT_TXCNT:
-
-						pCh->channelTcount = *((cntStatPtr)pc);
-						pc += sizeof(cntStat);
-						break;
-
-					case STAT_RXCNT:
-
-						pCh->channelRcount = *((cntStatPtr)pc);
-						pc += sizeof(cntStat);
-						break;
-
-					case STAT_BOXIDS:
-						pB->channelBtypes = *((bidStatPtr)pc);
-						pc += sizeof(bidStat);
-						set_baud_params(pB);
-						break;
-
-					case STAT_HWFAIL:
-						i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST);
-						pCh->channelFail = *((failStatPtr)pc);
-						pc += sizeof(failStat);
-						break;
-
-					/* No explicit match? then
-					 * Might be an error packet...
-					 */
-					default:
-						switch (uc & STAT_MOD_ERROR)
-						{
-						case STAT_ERROR:
-							if (uc & STAT_E_PARITY) {
-								pCh->dataSetIn |= I2_PAR;
-								pCh->icount.parity++;
-							}
-							if (uc & STAT_E_FRAMING){
-								pCh->dataSetIn |= I2_FRA;
-								pCh->icount.frame++;
-							}
-							if (uc & STAT_E_OVERRUN){
-								pCh->dataSetIn |= I2_OVR;
-								pCh->icount.overrun++;
-							}
-							break;
-
-						case STAT_MODEM:
-							// the answer to DSS_NOW request (not change)
-							pCh->dataSetIn = (pCh->dataSetIn
-								& ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) )
-								| xlatDss[uc & 0xf];
-							wake_up_interruptible ( &pCh->dss_now_wait );
-						default:
-							break;
-						}
-					}  /* End of switch on status type */
-					if (dss_change) {
-#ifdef USE_IQ
-						schedule_work(&pCh->tqueue_status);
-#else
-						do_status(&pCh->tqueue_status);
-#endif
-					}
-				}
-				else  /* Or else, channel is invalid */
-				{
-					// Even though the channel is invalid, we must test the
-					// status to see how much additional data it has (to be
-					// skipped)
-					switch (*pc++)
-					{
-					case STAT_FLOW:
-						pc += 4;    /* Skip the data */
-						break;
-
-					default:
-						break;
-					}
-				}
-			}  // End of while (there is still some status packet left)
-			break;
-
-		default: // Neither packet? should be impossible
-			ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
-				PTYPE_OF(pB->i2eLeadoffWord) );
-			write_unlock_irqrestore(&pB->read_fifo_spinlock,
-					bflags);
-
-			break;
-		}  // End of switch on type of packets
-	}	/*while(board I2_HAS_INPUT)*/
-
-	ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
-
-	// Send acknowledgement to the board even if there was no data!
-	pB->i2eOutMailWaiting |= MB_IN_STRIPPED;
-	return;
-}
-
-//******************************************************************************
-// Function:   i2Write2Fifo(pB,address,count)
-// Parameters: Pointer to a board structure, source address, byte count
-// Returns:    bytes written
-//
-// Description:
-//  Writes count bytes to board io address(implied) from source
-//  Adjusts count, leaves reserve for next time around bypass cmds
-//******************************************************************************
-static int
-i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
-{
-	int rc = 0;
-	unsigned long flags;
-	write_lock_irqsave(&pB->write_fifo_spinlock, flags);
-	if (!pB->i2eWaitingForEmptyFifo) {
-		if (pB->i2eFifoRemains > (count+reserve)) {
-			pB->i2eFifoRemains -= count;
-			iiWriteBuf(pB, source, count);
-			pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
-			rc =  count;
-		}
-	}
-	write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-	return rc;
-}
-//******************************************************************************
-// Function:   i2StuffFifoBypass(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// Stuffs as many bypass commands into the fifo as possible. This is simpler
-// than stuffing data or inline commands to fifo, since we do not have
-// flow-control to deal with.
-//******************************************************************************
-static inline void
-i2StuffFifoBypass(i2eBordStrPtr pB)
-{
-	i2ChanStrPtr pCh;
-	unsigned char *pRemove;
-	unsigned short stripIndex;
-	unsigned short packetSize;
-	unsigned short paddedSize;
-	unsigned short notClogged = 1;
-	unsigned long flags;
-
-	int bailout = 1000;
-
-	// Continue processing so long as there are entries, or there is room in the
-	// fifo. Each entry represents a channel with something to do.
-	while ( --bailout && notClogged && 
-			(NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
-	{
-		write_lock_irqsave(&pCh->Cbuf_spinlock, flags);
-		stripIndex = pCh->Cbuf_strip;
-
-		// as long as there are packets for this channel...
-
-		while (stripIndex != pCh->Cbuf_stuff) {
-			pRemove = &(pCh->Cbuf[stripIndex]);
-			packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
-			paddedSize = roundup(packetSize, 2);
-
-			if (paddedSize > 0) {
-				if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
-					notClogged = 0;	/* fifo full */
-					i2QueueNeeds(pB, pCh, NEED_BYPASS);	// Put back on queue
-					break;   // Break from the channel
-				} 
-			}
-#ifdef DEBUG_FIFO
-WriteDBGBuf("BYPS", pRemove, paddedSize);
-#endif	/* DEBUG_FIFO */
-			pB->debugBypassCount++;
-
-			pRemove += packetSize;
-			stripIndex += packetSize;
-			if (stripIndex >= CBUF_SIZE) {
-				stripIndex = 0;
-				pRemove = pCh->Cbuf;
-			}
-		}
-		// Done with this channel. Move to next, removing this one from 
-		// the queue of channels if we cleaned it out (i.e., didn't get clogged.
-		pCh->Cbuf_strip = stripIndex;
-		write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
-	}  // Either clogged or finished all the work
-
-#ifdef IP2DEBUG_TRACE
-	if ( !bailout ) {
-		ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 );
-	}
-#endif
-}
-
-//******************************************************************************
-// Function:   i2StuffFifoFlow(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// Stuffs as many flow control packets into the fifo as possible. This is easier
-// even than doing normal bypass commands, because there is always at most one
-// packet, already assembled, for each channel.
-//******************************************************************************
-static inline void
-i2StuffFifoFlow(i2eBordStrPtr pB)
-{
-	i2ChanStrPtr pCh;
-	unsigned short paddedSize = roundup(sizeof(flowIn), 2);
-
-	ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
-		pB->i2eFifoRemains, paddedSize );
-
-	// Continue processing so long as there are entries, or there is room in the
-	// fifo. Each entry represents a channel with something to do.
-	while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) {
-		pB->debugFlowCount++;
-
-		// NO Chan LOCK needed ???
-		if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) {
-			break;
-		}
-#ifdef DEBUG_FIFO
-		WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize);
-#endif /* DEBUG_FIFO */
-
-	}  // Either clogged or finished all the work
-
-	ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 );
-}
-
-//******************************************************************************
-// Function:   i2StuffFifoInline(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// Stuffs as much data and inline commands into the fifo as possible. This is
-// the most complex fifo-stuffing operation, since there if now the channel
-// flow-control issue to deal with.
-//******************************************************************************
-static inline void
-i2StuffFifoInline(i2eBordStrPtr pB)
-{
-	i2ChanStrPtr pCh;
-	unsigned char *pRemove;
-	unsigned short stripIndex;
-	unsigned short packetSize;
-	unsigned short paddedSize;
-	unsigned short notClogged = 1;
-	unsigned short flowsize;
-	unsigned long flags;
-
-	int bailout  = 1000;
-	int bailout2;
-
-	ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains, 
-			pB->i2Dbuf_strip, pB->i2Dbuf_stuff );
-
-	// Continue processing so long as there are entries, or there is room in the
-	// fifo. Each entry represents a channel with something to do.
-	while ( --bailout && notClogged && 
-			(NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
-	{
-		write_lock_irqsave(&pCh->Obuf_spinlock, flags);
-		stripIndex = pCh->Obuf_strip;
-
-		ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
-
-		// as long as there are packets for this channel...
-		bailout2 = 1000;
-		while ( --bailout2 && stripIndex != pCh->Obuf_stuff) {
-			pRemove = &(pCh->Obuf[stripIndex]);
-
-			// Must determine whether this be a data or command packet to
-			// calculate correctly the header size and the amount of
-			// flow-control credit this type of packet will use.
-			if (PTYPE_OF(pRemove) == PTYPE_DATA) {
-				flowsize = DATA_COUNT_OF(pRemove);
-				packetSize = flowsize + sizeof(i2DataHeader);
-			} else {
-				flowsize = CMD_COUNT_OF(pRemove);
-				packetSize = flowsize + sizeof(i2CmdHeader);
-			}
-			flowsize = CREDIT_USAGE(flowsize);
-			paddedSize = roundup(packetSize, 2);
-
-			ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
-
-			// If we don't have enough credits from the board to send the data,
-			// flag the channel that we are waiting for flow control credit, and
-			// break out. This will clean up this channel and remove us from the
-			// queue of hot things to do.
-
-				ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize );
-
-			if (pCh->outfl.room <= flowsize)	{
-				// Do Not have the credits to send this packet.
-				i2QueueNeeds(pB, pCh, NEED_CREDIT);
-				notClogged = 0;
-				break;   // So to do next channel
-			}
-			if ( (paddedSize > 0) 
-				&& ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) {
-				// Do Not have room in fifo to send this packet.
-				notClogged = 0;
-				i2QueueNeeds(pB, pCh, NEED_INLINE);	
-				break;   // Break from the channel
-			}
-#ifdef DEBUG_FIFO
-WriteDBGBuf("DATA", pRemove, paddedSize);
-#endif /* DEBUG_FIFO */
-			pB->debugInlineCount++;
-
-			pCh->icount.tx += flowsize;
-			// Update current credits
-			pCh->outfl.room -= flowsize;
-			pCh->outfl.asof += flowsize;
-			if (PTYPE_OF(pRemove) == PTYPE_DATA) {
-				pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove);
-			}
-			pRemove += packetSize;
-			stripIndex += packetSize;
-
-			ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip);
-
-			if (stripIndex >= OBUF_SIZE) {
-				stripIndex = 0;
-				pRemove = pCh->Obuf;
-
-				ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex );
-
-			}
-		}	/* while */
-		if ( !bailout2 ) {
-			ip2trace (CHANN, ITRC_ERROR, 3, 0 );
-		}
-		// Done with this channel. Move to next, removing this one from the
-		// queue of channels if we cleaned it out (i.e., didn't get clogged.
-		pCh->Obuf_strip = stripIndex;
-		write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-		if ( notClogged )
-		{
-
-			ip2trace (CHANN, ITRC_SICMD, 8, 0 );
-
-			if ( pCh->pTTY ) {
-				ip2_owake(pCh->pTTY);
-			}
-		}
-	}  // Either clogged or finished all the work
-
-	if ( !bailout ) {
-		ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 );
-	}
-
-	ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip);
-}
-
-//******************************************************************************
-// Function:   serviceOutgoingFifo(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// Helper routine to put data in the outgoing fifo, if we aren't already waiting
-// for something to be there. If the fifo has only room for a very little data,
-// go head and hit the board with a mailbox hit immediately. Otherwise, it will
-// have to happen later in the interrupt processing. Since this routine may be
-// called both at interrupt and foreground time, we must turn off interrupts
-// during the entire process.
-//******************************************************************************
-static void
-serviceOutgoingFifo(i2eBordStrPtr pB)
-{
-	// If we aren't currently waiting for the board to empty our fifo, service
-	// everything that is pending, in priority order (especially, Bypass before
-	// Inline).
-	if ( ! pB->i2eWaitingForEmptyFifo )
-	{
-		i2StuffFifoFlow(pB);
-		i2StuffFifoBypass(pB);
-		i2StuffFifoInline(pB);
-
-		iiSendPendingMail(pB);
-	} 
-}
-
-//******************************************************************************
-// Function:   i2ServiceBoard(pB)
-// Parameters: Pointer to a board structure
-// Returns:    Nothing
-//
-// Description:
-// Normally this is called from interrupt level, but there is deliberately
-// nothing in here specific to being called from interrupt level. All the
-// hardware-specific, interrupt-specific things happen at the outer levels.
-//
-// For example, a timer interrupt could drive this routine for some sort of
-// polled operation. The only requirement is that the programmer deal with any
-// atomiticity/concurrency issues that result.
-//
-// This routine responds to the board's having sent mailbox information to the
-// host (which would normally cause an interrupt). This routine reads the
-// incoming mailbox. If there is no data in it, this board did not create the
-// interrupt and/or has nothing to be done to it. (Except, if we have been
-// waiting to write mailbox data to it, we may do so.
-//
-// Based on the value in the mailbox, we may take various actions.
-//
-// No checking here of pB validity: after all, it shouldn't have been called by
-// the handler unless pB were on the list.
-//******************************************************************************
-static inline int
-i2ServiceBoard ( i2eBordStrPtr pB )
-{
-	unsigned inmail;
-	unsigned long flags;
-
-
-	/* This should be atomic because of the way we are called... */
-	if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) {
-		inmail = iiGetMail(pB);
-	}
-	pB->i2eStartMail = NO_MAIL_HERE;
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail );
-
-	if (inmail != NO_MAIL_HERE) {
-		// If the board has gone fatal, nothing to do but hit a bit that will
-		// alert foreground tasks to protest!
-		if ( inmail & MB_FATAL_ERROR ) {
-			pB->i2eFatal = 1;
-			goto exit_i2ServiceBoard;
-		}
-
-		/* Assuming no fatal condition, we proceed to do work */
-		if ( inmail & MB_IN_STUFFED ) {
-			pB->i2eFifoInInts++;
-			i2StripFifo(pB);     /* There might be incoming packets */
-		}
-
-		if (inmail & MB_OUT_STRIPPED) {
-			pB->i2eFifoOutInts++;
-			write_lock_irqsave(&pB->write_fifo_spinlock, flags);
-			pB->i2eFifoRemains = pB->i2eFifoSize;
-			pB->i2eWaitingForEmptyFifo = 0;
-			write_unlock_irqrestore(&pB->write_fifo_spinlock,
-					flags);
-
-			ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
-
-		}
-		serviceOutgoingFifo(pB);
-	}
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 );
-
-exit_i2ServiceBoard:
-
-	return 0;
-}
diff --git a/drivers/char/ip2/i2lib.h b/drivers/char/ip2/i2lib.h
deleted file mode 100644
index e559e9b..0000000
--- a/drivers/char/ip2/i2lib.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Header file for high level library functions
-*
-*******************************************************************************/
-#ifndef I2LIB_H
-#define I2LIB_H   1
-//------------------------------------------------------------------------------
-// I2LIB.H
-//
-// IntelliPort-II and IntelliPort-IIEX
-//
-// Defines, structure definitions, and external declarations for i2lib.c
-//------------------------------------------------------------------------------
-//--------------------------------------
-// Mandatory Includes:
-//--------------------------------------
-#include "ip2types.h"
-#include "i2ellis.h"
-#include "i2pack.h"
-#include "i2cmd.h"
-#include <linux/workqueue.h>
-
-//------------------------------------------------------------------------------
-// i2ChanStr -- Channel Structure:
-// Used to track per-channel information for the library routines using standard
-// loadware. Note also, a pointer to an array of these structures is patched
-// into the i2eBordStr (see i2ellis.h)
-//------------------------------------------------------------------------------
-//
-// If we make some limits on the maximum block sizes, we can avoid dealing with
-// buffer wrap. The wrapping of the buffer is based on where the start of the
-// packet is. Then there is always room for the packet contiguously.
-//
-// Maximum total length of an outgoing data or in-line command block. The limit
-// of 36 on data is quite arbitrary and based more on DOS memory limitations
-// than the board interface. However, for commands, the maximum packet length is
-// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits
-// (see I2PACK.H) in such packets. For data packets, the count field size is not
-// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE,
-// but be careful if wanting to modify either.
-//
-#define MAX_OBUF_BLOCK  36
-
-// Another note on maximum block sizes: we are buffering packets here. Data is
-// put into the buffer (if there is room) regardless of the credits from the
-// board. The board sends new credits whenever it has removed from his buffers a
-// number of characters equal to 80% of total buffer size. (Of course, the total
-// buffer size is what is reported when the very first set of flow control
-// status packets are received from the board. Therefore, to be robust, you must
-// always fill the board to at least 80% of the current credit limit, else you
-// might not give it enough to trigger a new report. These conditions are
-// obtained here so long as the maximum output block size is less than 20% the
-// size of the board's output buffers. This is true at present by "coincidence"
-// or "infernal knowledge": the board's output buffers are at least 700 bytes
-// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest
-// strategy might be to trap the first flow control report and guarantee that
-// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first
-// reported buffer credit.
-//
-#define MAX_CBUF_BLOCK  6	// Maximum total length of a bypass command block
-
-#define IBUF_SIZE       512	// character capacity of input buffer per channel
-#define OBUF_SIZE       1024// character capacity of output buffer per channel
-#define CBUF_SIZE       10	// character capacity of output bypass buffer
-
-typedef struct _i2ChanStr
-{
-	// First, back-pointers so that given a pointer to this structure, you can
-	// determine the correct board and channel number to reference, (say, when
-	// issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.)
-
-	int      port_index;    // Index of port in channel structure array attached
-							// to board structure.
-	PTTY     pTTY;          // Pointer to tty structure for port (OS specific)
-	USHORT   validity;      // Indicates whether the given channel has been
-							// initialized, really exists (or is a missing
-							// channel, e.g. channel 9 on an 8-port box.)
-
-	i2eBordStrPtr  pMyBord; // Back-pointer to this channel's board structure 
-
-	int      wopen;			// waiting fer carrier
-
-	int      throttled;		// Set if upper layer can take no data
-
-	int      flags;         // Defined in tty.h
-
-	PWAITQ   open_wait;     // Pointer for OS sleep function.
-	PWAITQ   close_wait;    // Pointer for OS sleep function.
-	PWAITQ   delta_msr_wait;// Pointer for OS sleep function.
-	PWAITQ   dss_now_wait;	// Pointer for OS sleep function.
-
-	struct timer_list  BookmarkTimer;   // Used by i2DrainOutput
-	wait_queue_head_t pBookmarkWait;   // Used by i2DrainOutput
-
-	int      BaudBase;
-	int      BaudDivisor;
-
-	USHORT   ClosingDelay;
-	USHORT   ClosingWaitTime;
-
-	volatile
-	flowIn   infl;	// This structure is initialized as a completely
-					// formed flow-control command packet, and as such
-					// has the channel number, also the capacity and
-					// "as-of" data needed continuously.
-
-	USHORT   sinceLastFlow; // Counts the number of characters read from input
-							// buffers, since the last time flow control info
-							// was sent.
-
-	USHORT   whenSendFlow;  // Determines when new flow control is to be sent to
-							// the board. Note unlike earlier manifestations of
-							// the driver, these packets can be sent from
-							// in-place.
-
-	USHORT   channelNeeds;  // Bit map of important things which must be done
-							// for this channel. (See bits below )
-
-	volatile
-	flowStat outfl;         // Same type of structure is used to hold current
-							// flow control information used to control our
-							// output. "asof" is kept updated as data is sent,
-							// and "room" never goes to zero.
-
-	// The incoming ring buffer
-	// Unlike the outgoing buffers, this holds raw data, not packets. The two
-	// extra bytes are used to hold the byte-padding when there is room for an
-	// odd number of bytes before we must wrap.
-	//
-	UCHAR    Ibuf[IBUF_SIZE + 2];
-	volatile
-	USHORT   Ibuf_stuff;     // Stuffing index
-	volatile
-	USHORT   Ibuf_strip;     // Stripping index
-
-	// The outgoing ring-buffer: Holds Data and command packets. N.B., even
-	// though these are in the channel structure, the channel is also written
-	// here, the easier to send it to the fifo when ready. HOWEVER, individual
-	// packets here are NOT padded to even length: the routines for writing
-	// blocks to the fifo will pad to even byte counts.
-	//
-	UCHAR	Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4];
-	volatile
-	USHORT	Obuf_stuff;     // Stuffing index
-	volatile
-	USHORT	Obuf_strip;     // Stripping index
-	int	Obuf_char_count;
-
-	// The outgoing bypass-command buffer. Unlike earlier manifestations, the
-	// flow control packets are sent directly from the structures. As above, the
-	// channel number is included in the packet, but they are NOT padded to even
-	// size.
-	//
-	UCHAR    Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2];
-	volatile
-	USHORT   Cbuf_stuff;     // Stuffing index
-	volatile
-	USHORT   Cbuf_strip;     // Stripping index
-
-	// The temporary buffer for the Linux tty driver PutChar entry.
-	//
-	UCHAR    Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)];
-	volatile
-	USHORT   Pbuf_stuff;     // Stuffing index
-
-	// The state of incoming data-set signals
-	//
-	USHORT   dataSetIn;     // Bit-mapped according to below. Also indicates
-							// whether a break has been detected since last
-							// inquiry.
-
-	// The state of outcoming data-set signals (as far as we can tell!)
-	//
-	USHORT   dataSetOut;     // Bit-mapped according to below. 
-
-	// Most recent hot-key identifier detected
-	//
-	USHORT   hotKeyIn;      // Hot key as sent by the board, HOT_CLEAR indicates
-				// no hot key detected since last examined.
-
-	// Counter of outstanding requests for bookmarks
-	//
-	short   bookMarks;	// Number of outstanding bookmark requests, (+ive
-						// whenever a bookmark request if queued up, -ive
-						// whenever a bookmark is received).
-
-	// Misc options
-	//
-	USHORT   channelOptions;   // See below
-
-	// To store various incoming special packets
-	//
-	debugStat   channelStatus;
-	cntStat     channelRcount;
-	cntStat     channelTcount;
-	failStat    channelFail;
-
-	// To store the last values for line characteristics we sent to the board.
-	//
-	int	speed;
-
-	int flush_flags;
-
-	void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...);
-
-	/*
-	 * Kernel counters for the 4 input interrupts 
-	 */
-	struct async_icount icount;
-
-	/*
-	 *	Task queues for processing input packets from the board.
-	 */
-	struct work_struct	tqueue_input;
-	struct work_struct	tqueue_status;
-	struct work_struct	tqueue_hangup;
-
-	rwlock_t Ibuf_spinlock;
-	rwlock_t Obuf_spinlock;
-	rwlock_t Cbuf_spinlock;
-	rwlock_t Pbuf_spinlock;
-
-} i2ChanStr, *i2ChanStrPtr;
-
-//---------------------------------------------------
-// Manifests and bit-maps for elements in i2ChanStr
-//---------------------------------------------------
-//
-// flush flags
-//
-#define STARTFL_FLAG 1
-#define STOPFL_FLAG  2
-
-// validity
-//
-#define CHANNEL_MAGIC_BITS 0xff00
-#define CHANNEL_MAGIC      0x5300   // (validity & CHANNEL_MAGIC_BITS) ==
-									// CHANNEL_MAGIC --> structure good
-
-#define CHANNEL_SUPPORT    0x0001   // Indicates channel is supported, exists,
-									// and passed P.O.S.T.
-
-// channelNeeds
-//
-#define NEED_FLOW    1  // Indicates flow control has been queued
-#define NEED_INLINE  2  // Indicates inline commands or data queued
-#define NEED_BYPASS  4  // Indicates bypass commands queued
-#define NEED_CREDIT  8  // Indicates would be sending except has not sufficient
-						// credit. The data is still in the channel structure,
-						// but the channel is not enqueued in the board
-						// structure again until there is a credit received from
-						// the board.
-
-// dataSetIn (Also the bits for i2GetStatus return value)
-//
-#define I2_DCD 1
-#define I2_CTS 2
-#define I2_DSR 4
-#define I2_RI  8
-
-// dataSetOut (Also the bits for i2GetStatus return value)
-//
-#define I2_DTR 1
-#define I2_RTS 2
-
-// i2GetStatus() can optionally clear these bits
-//
-#define I2_BRK    0x10  // A break was detected
-#define I2_PAR    0x20  // A parity error was received 
-#define I2_FRA    0x40  // A framing error was received
-#define I2_OVR    0x80  // An overrun error was received 
-
-// i2GetStatus() automatically clears these bits */
-//
-#define I2_DDCD   0x100 // DCD changed from its  former value
-#define I2_DCTS   0x200 // CTS changed from its former value 
-#define I2_DDSR   0x400 // DSR changed from its former value 
-#define I2_DRI    0x800 // RI changed from its former value 
-
-// hotKeyIn
-//
-#define HOT_CLEAR 0x1322   // Indicates that no hot-key has been detected
-
-// channelOptions
-//
-#define CO_NBLOCK_WRITE 1  	// Writes don't block waiting for buffer. (Default
-							// is, they do wait.)
-
-// fcmodes
-//
-#define I2_OUTFLOW_CTS  0x0001
-#define I2_INFLOW_RTS   0x0002
-#define I2_INFLOW_DSR   0x0004
-#define I2_INFLOW_DTR   0x0008
-#define I2_OUTFLOW_DSR  0x0010
-#define I2_OUTFLOW_DTR  0x0020
-#define I2_OUTFLOW_XON  0x0040
-#define I2_OUTFLOW_XANY 0x0080
-#define I2_INFLOW_XON   0x0100
-
-#define I2_CRTSCTS      (I2_OUTFLOW_CTS|I2_INFLOW_RTS)
-#define I2_IXANY_MODE   (I2_OUTFLOW_XON|I2_OUTFLOW_XANY)
-
-//-------------------------------------------
-// Macros used from user level like functions
-//-------------------------------------------
-
-// Macros to set and clear channel options
-//
-#define i2SetOption(pCh, option) pCh->channelOptions |= option
-#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option
-
-// Macro to set fatal-error trap
-//
-#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine
-
-//--------------------------------------------
-// Declarations and prototypes for i2lib.c
-//--------------------------------------------
-//
-static int  i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr);
-static int  i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...);
-static int  i2GetStatus(i2ChanStrPtr, int);
-static int  i2Input(i2ChanStrPtr);
-static int  i2InputFlush(i2ChanStrPtr);
-static int  i2Output(i2ChanStrPtr, const char *, int);
-static int  i2OutputFree(i2ChanStrPtr);
-static int  i2ServiceBoard(i2eBordStrPtr);
-static void i2DrainOutput(i2ChanStrPtr, int);
-
-#ifdef IP2DEBUG_TRACE
-void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...);
-#else
-#define ip2trace(a,b,c,d...) do {} while (0)
-#endif
-
-// Argument to i2QueueCommands
-//
-#define C_IN_LINE 1
-#define C_BYPASS  0
-
-#endif   // I2LIB_H
diff --git a/drivers/char/ip2/i2pack.h b/drivers/char/ip2/i2pack.h
deleted file mode 100644
index 00342a6..0000000
--- a/drivers/char/ip2/i2pack.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Definitions of the packets used to transfer data and commands
-*                Host <--> Board. Information provided here is only applicable
-*                when the standard loadware is active.
-*
-*******************************************************************************/
-#ifndef I2PACK_H
-#define I2PACK_H  1
-
-//-----------------------------------------------
-// Revision History:
-//
-// 10 October 1991   MAG First draft
-// 24 February 1992  MAG Additions for 1.4.x loadware
-// 11 March 1992     MAG New status packets
-//
-//-----------------------------------------------
-
-//------------------------------------------------------------------------------
-// Packet Formats:
-//
-// Information passes between the host and board through the FIFO in packets.
-// These have headers which indicate the type of packet. Because the fifo data
-// path may be 16-bits wide, the protocol is constrained such that each packet
-// is always padded to an even byte count. (The lower-level interface routines
-// -- i2ellis.c -- are designed to do this).
-//
-// The sender (be it host or board) must place some number of complete packets
-// in the fifo, then place a message in the mailbox that packets are available.
-// Placing such a message interrupts the "receiver" (be it board or host), who
-// reads the mailbox message and determines that there are incoming packets
-// ready. Since there are no partial packets, and the length of a packet is
-// given in the header, the remainder of the packet can be read without checking
-// for FIFO empty condition. The process is repeated, packet by packet, until
-// the incoming FIFO is empty. Then the receiver uses the outbound mailbox to
-// signal the board that it has read the data. Only then can the sender place
-// additional data in the fifo.
-//------------------------------------------------------------------------------
-//
-//------------------------------------------------
-// Definition of Packet Header Area
-//------------------------------------------------
-//
-// Caution: these only define header areas. In actual use the data runs off
-// beyond the end of these structures.
-//
-// Since these structures are based on sequences of bytes which go to the board,
-// there cannot be ANY padding between the elements.
-#pragma pack(1)
-
-//----------------------------
-// DATA PACKETS
-//----------------------------
-
-typedef struct _i2DataHeader
-{
-	unsigned char i2sChannel;  /* The channel number: 0-255 */
-
-	// -- Bitfields are allocated LSB first --
-
-	// For incoming data, indicates whether this is an ordinary packet or a
-	// special one (e.g., hot key hit).
-	unsigned i2sId : 2 __attribute__ ((__packed__));
-
-	// For tagging data packets. There are flush commands which flush only data
-	// packets bearing a particular tag. (used in implementing IntelliView and
-	// IntelliPrint). THE TAG VALUE 0xf is RESERVED and must not be used (it has
-	// meaning internally to the loadware).
-	unsigned i2sTag : 4;
-
-	// These two bits determine the type of packet sent/received.
-	unsigned i2sType : 2;
-
-	// The count of data to follow: does not include the possible additional
-	// padding byte. MAXIMUM COUNT: 4094. The top four bits must be 0.
-	unsigned short i2sCount;
-
-} i2DataHeader, *i2DataHeaderPtr;
-
-// Structure is immediately followed by the data, proper.
-
-//----------------------------
-// NON-DATA PACKETS
-//----------------------------
-
-typedef struct _i2CmdHeader
-{
-	unsigned char i2sChannel;	// The channel number: 0-255 (Except where noted
-								// - see below
-
-	// Number of bytes of commands, status or whatever to follow
-	unsigned i2sCount : 6;
-
-	// These two bits determine the type of packet sent/received.
-	unsigned i2sType : 2;
-
-} i2CmdHeader, *i2CmdHeaderPtr;
-
-// Structure is immediately followed by the applicable data.
-
-//---------------------------------------
-// Flow Control Packets (Outbound)
-//---------------------------------------
-
-// One type of outbound command packet is so important that the entire structure
-// is explicitly defined here. That is the flow-control packet. This is never
-// sent by user-level code (as would be the commands to raise/lower DTR, for
-// example). These are only sent by the library routines in response to reading
-// incoming data into the buffers.
-//
-// The parameters inside the command block are maintained in place, then the
-// block is sent at the appropriate time.
-
-typedef struct _flowIn
-{
-	i2CmdHeader    hd;      // Channel #, count, type (see above)
-	unsigned char  fcmd;    // The flow control command (37)
-	unsigned short asof;    // As of byte number "asof" (LSB first!) I have room
-							// for "room" bytes
-	unsigned short room;
-} flowIn, *flowInPtr;
-
-//----------------------------------------
-// (Incoming) Status Packets
-//----------------------------------------
-
-// Incoming packets which are non-data packets are status packets. In this case,
-// the channel number in the header is unimportant. What follows are one or more
-// sub-packets, the first word of which consists of the channel (first or low
-// byte) and the status indicator (second or high byte), followed by possibly
-// more data.
-
-#define STAT_CTS_UP     0  /* CTS raised  (no other bytes) */
-#define STAT_CTS_DN     1  /* CTS dropped (no other bytes) */
-#define STAT_DCD_UP     2  /* DCD raised  (no other bytes) */
-#define STAT_DCD_DN     3  /* DCD dropped (no other bytes) */
-#define STAT_DSR_UP     4  /* DSR raised  (no other bytes) */
-#define STAT_DSR_DN     5  /* DSR dropped (no other bytes) */
-#define STAT_RI_UP      6  /* RI  raised  (no other bytes) */
-#define STAT_RI_DN      7  /* RI  dropped (no other bytes) */
-#define STAT_BRK_DET    8  /* BRK detect  (no other bytes) */
-#define STAT_FLOW       9  /* Flow control(-- more: see below */
-#define STAT_BMARK      10 /* Bookmark    (no other bytes)
-							* Bookmark is sent as a response to
-							* a command 60: request for bookmark
-							*/
-#define STAT_STATUS     11 /* Special packet: see below */
-#define STAT_TXCNT      12 /* Special packet: see below */
-#define STAT_RXCNT      13 /* Special packet: see below */
-#define STAT_BOXIDS     14 /* Special packet: see below */
-#define STAT_HWFAIL     15 /* Special packet: see below */
-
-#define STAT_MOD_ERROR  0xc0
-#define STAT_MODEM      0xc0/* If status & STAT_MOD_ERROR:
-							 * == STAT_MODEM, then this is a modem
-							 * status packet, given in response to a
-							 * CMD_DSS_NOW command.
-							 * The low nibble has each data signal:
-							 */
-#define STAT_MOD_DCD    0x8
-#define STAT_MOD_RI     0x4
-#define STAT_MOD_DSR    0x2
-#define STAT_MOD_CTS    0x1
-
-#define STAT_ERROR      0x80/* If status & STAT_MOD_ERROR
-							 * == STAT_ERROR, then
-							 * sort of error on the channel.
-							 * The remaining seven bits indicate
-							 * what sort of error it is.
-							 */
-/* The low three bits indicate parity, framing, or overrun errors */
-
-#define STAT_E_PARITY   4     /* Parity error */
-#define STAT_E_FRAMING  2     /* Framing error */
-#define STAT_E_OVERRUN  1     /* (uxart) overrun error */
-
-//---------------------------------------
-// STAT_FLOW packets
-//---------------------------------------
-
-typedef struct _flowStat
-{
-	unsigned short asof;
-	unsigned short room;
-}flowStat, *flowStatPtr;
-
-// flowStat packets are received from the board to regulate the flow of outgoing
-// data. A local copy of this structure is also kept to track the amount of
-// credits used and credits remaining. "room" is the amount of space in the
-// board's buffers, "as of" having received a certain byte number. When sending
-// data to the fifo, you must calculate how much buffer space your packet will
-// use.  Add this to the current "asof" and subtract it from the current "room".
-//
-// The calculation for the board's buffer is given by CREDIT_USAGE, where size
-// is the un-rounded count of either data characters or command characters.
-// (Which is to say, the count rounded up, plus two).
-
-#define CREDIT_USAGE(size) (((size) + 3) & ~1)
-
-//---------------------------------------
-// STAT_STATUS packets
-//---------------------------------------
-
-typedef  struct   _debugStat
-{
-	unsigned char d_ccsr;
-	unsigned char d_txinh;
-	unsigned char d_stat1;
-	unsigned char d_stat2;
-} debugStat, *debugStatPtr;
-
-// debugStat packets are sent to the host in response to a CMD_GET_STATUS
-// command.  Each byte is bit-mapped as described below:
-
-#define D_CCSR_XON      2     /* Has received XON, ready to transmit */
-#define D_CCSR_XOFF     4     /* Has received XOFF, not transmitting */
-#define D_CCSR_TXENAB   8     /* Transmitter is enabled */
-#define D_CCSR_RXENAB   0x80  /* Receiver is enabled */
-
-#define D_TXINH_BREAK   1     /* We are sending a break */
-#define D_TXINH_EMPTY   2     /* No data to send */
-#define D_TXINH_SUSP    4     /* Output suspended via command 57 */
-#define D_TXINH_CMD     8     /* We are processing an in-line command */
-#define D_TXINH_LCD     0x10  /* LCD diagnostics are running */
-#define D_TXINH_PAUSE   0x20  /* We are processing a PAUSE command */
-#define D_TXINH_DCD     0x40  /* DCD is low, preventing transmission */
-#define D_TXINH_DSR     0x80  /* DSR is low, preventing transmission */
-
-#define D_STAT1_TXEN    1     /* Transmit INTERRUPTS enabled */
-#define D_STAT1_RXEN    2     /* Receiver INTERRUPTS enabled */
-#define D_STAT1_MDEN    4     /* Modem (data set sigs) interrupts enabled */
-#define D_STAT1_RLM     8     /* Remote loopback mode selected */
-#define D_STAT1_LLM     0x10  /* Local internal loopback mode selected */
-#define D_STAT1_CTS     0x20  /* CTS is low, preventing transmission */
-#define D_STAT1_DTR     0x40  /* DTR is low, to stop remote transmission */
-#define D_STAT1_RTS     0x80  /* RTS is low, to stop remote transmission */
-
-#define D_STAT2_TXMT    1     /* Transmit buffers are all empty */
-#define D_STAT2_RXMT    2     /* Receive buffers are all empty */
-#define D_STAT2_RXINH   4     /* Loadware has tried to inhibit remote
-							   * transmission:  dropped DTR, sent XOFF,
-							   * whatever...
-							   */
-#define D_STAT2_RXFLO   8     /* Loadware can send no more data to host
-							   * until it receives a flow-control packet
-							   */
-//-----------------------------------------
-// STAT_TXCNT and STAT_RXCNT packets
-//----------------------------------------
-
-typedef  struct   _cntStat
-{
-	unsigned short cs_time;    // (Assumes host is little-endian!)
-	unsigned short cs_count;
-} cntStat, *cntStatPtr;
-
-// These packets are sent in response to a CMD_GET_RXCNT or a CMD_GET_TXCNT
-// bypass command. cs_time is a running 1 Millisecond counter which acts as a
-// time stamp. cs_count is a running counter of data sent or received from the
-// uxarts. (Not including data added by the chip itself, as with CRLF
-// processing).
-//------------------------------------------
-// STAT_HWFAIL packets
-//------------------------------------------
-
-typedef struct _failStat
-{
-	unsigned char fs_written;
-	unsigned char fs_read;
-	unsigned short fs_address;
-} failStat, *failStatPtr;
-
-// This packet is sent whenever the on-board diagnostic process detects an
-// error. At startup, this process is dormant. The host can wake it up by
-// issuing the bypass command CMD_HW_TEST. The process runs at low priority and
-// performs continuous hardware verification; writing data to certain on-board
-// registers, reading it back, and comparing. If it detects an error, this
-// packet is sent to the host, and the process goes dormant again until the host
-// sends another CMD_HW_TEST. It then continues with the next register to be
-// tested.
-
-//------------------------------------------------------------------------------
-// Macros to deal with the headers more easily! Note that these are defined so
-// they may be used as "left" as well as "right" expressions.
-//------------------------------------------------------------------------------
-
-// Given a pointer to the packet, reference the channel number
-//
-#define CHANNEL_OF(pP)  ((i2DataHeaderPtr)(pP))->i2sChannel
-
-// Given a pointer to the packet, reference the Packet type
-//
-#define PTYPE_OF(pP) ((i2DataHeaderPtr)(pP))->i2sType
-
-// The possible types of packets
-//
-#define PTYPE_DATA   0  /* Host <--> Board */
-#define PTYPE_BYPASS 1  /* Host ---> Board */
-#define PTYPE_INLINE 2  /* Host ---> Board */
-#define PTYPE_STATUS 2  /* Host <--- Board */
-
-// Given a pointer to a Data packet, reference the Tag
-//
-#define TAG_OF(pP) ((i2DataHeaderPtr)(pP))->i2sTag
-
-// Given a pointer to a Data packet, reference the data i.d.
-//
-#define ID_OF(pP)  ((i2DataHeaderPtr)(pP))->i2sId
-
-// The possible types of ID's
-//
-#define ID_ORDINARY_DATA   0
-#define ID_HOT_KEY         1
-
-// Given a pointer to a Data packet, reference the count
-//
-#define DATA_COUNT_OF(pP) ((i2DataHeaderPtr)(pP))->i2sCount
-
-// Given a pointer to a Data packet, reference the beginning of data
-//
-#define DATA_OF(pP) &((unsigned char *)(pP))[4] // 4 = size of header
-
-// Given a pointer to a Non-Data packet, reference the count
-//
-#define CMD_COUNT_OF(pP) ((i2CmdHeaderPtr)(pP))->i2sCount
-
-#define MAX_CMD_PACK_SIZE  62 // Maximum size of such a count
-
-// Given a pointer to a Non-Data packet, reference the beginning of data
-//
-#define CMD_OF(pP) &((unsigned char *)(pP))[2]  // 2 = size of header
-
-//--------------------------------
-// MailBox Bits:
-//--------------------------------
-
-//--------------------------
-// Outgoing (host to board)
-//--------------------------
-//
-#define MB_OUT_STUFFED     0x80  // Host has placed output in fifo 
-#define MB_IN_STRIPPED     0x40  // Host has read in all input from fifo 
-
-//--------------------------
-// Incoming (board to host)
-//--------------------------
-//
-#define MB_IN_STUFFED      0x80  // Board has placed input in fifo 
-#define MB_OUT_STRIPPED    0x40  // Board has read all output from fifo 
-#define MB_FATAL_ERROR     0x20  // Board has encountered a fatal error
-
-#pragma pack()                  // Reset padding to command-line default
-
-#endif      // I2PACK_H
-
diff --git a/drivers/char/ip2/ip2.h b/drivers/char/ip2/ip2.h
deleted file mode 100644
index 936ccc5..0000000
--- a/drivers/char/ip2/ip2.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Driver constants for configuration and tuning
-*
-*   NOTES:
-*
-*******************************************************************************/
-#ifndef IP2_H
-#define IP2_H
-
-#include "ip2types.h"
-#include "i2cmd.h"
-
-/*************/
-/* Constants */
-/*************/
-
-/* Device major numbers - since version 2.0.26. */
-#define IP2_TTY_MAJOR      71
-#define IP2_CALLOUT_MAJOR  72
-#define IP2_IPL_MAJOR      73
-
-/* Board configuration array.
- * This array defines the hardware irq and address for up to IP2_MAX_BOARDS
- * (4 supported per ip2_types.h) ISA board addresses and irqs MUST be specified,
- * PCI and EISA boards are probed for and automagicly configed
- * iff the addresses are set to 1 and 2 respectivily.
- *    0x0100 - 0x03f0 == ISA
- *	         1        == PCI
- *	         2        == EISA
- *	         0        == (skip this board)
- * This array defines the hardware addresses for them. Special 
- * addresses are EISA and PCI which go sniffing for boards. 
-
- * In a multiboard system the position in the array determines which port
- * devices are assigned to each board: 
- *		board 0 is assigned ttyF0.. to ttyF63, 
- *		board 1 is assigned ttyF64  to ttyF127,
- *		board 2 is assigned ttyF128 to ttyF191,
- *		board 3 is assigned ttyF192 to ttyF255. 
- *
- * In PCI and EISA bus systems each range is mapped to card in 
- * monotonically increasing slot number order, ISA position is as specified
- * here.
-
- * If the irqs are ALL set to 0,0,0,0 all boards operate in 
- * polled mode. For interrupt operation ISA boards require that the IRQ be 
- * specified, while PCI and EISA boards any nonzero entry 
- * will enable interrupts using the BIOS configured irq for the board. 
- * An invalid irq entry will default to polled mode for that card and print
- * console warning.
- 
- * When the driver is loaded as a module these setting can be overridden on the 
- * modprobe command line or on an option line in /etc/modprobe.conf.
- * If the driver is built-in the configuration must be 
- * set here for ISA cards and address set to 1 and 2 for PCI and EISA.
- *
- * Here is an example that shows most if not all possibe combinations:
-
- *static ip2config_t ip2config =
- *{
- *	{11,1,0,0},		// irqs
- *	{				// Addresses
- *		0x0308,		// Board 0, ttyF0   - ttyF63// ISA card at io=0x308, irq=11
- *		0x0001,		// Board 1, ttyF64  - ttyF127//PCI card configured by BIOS
- *		0x0000,		// Board 2, ttyF128 - ttyF191// Slot skipped
- *		0x0002		// Board 3, ttyF192 - ttyF255//EISA card configured by BIOS
- *												 // but polled not irq driven
- *	}
- *};
- */
-
- /* this structure is zeroed out because the suggested method is to configure
-  * the driver as a module, set up the parameters with an options line in
-  * /etc/modprobe.conf and load with modprobe or kmod, the kernel
-  * module loader
-  */
-
- /* This structure is NOW always initialized when the driver is initialized.
-  * Compiled in defaults MUST be added to the io and irq arrays in
-  * ip2.c.  Those values are configurable from insmod parameters in the
-  * case of modules or from command line parameters (ip2=io,irq) when
-  * compiled in.
-  */
-
-static ip2config_t ip2config =
-{
-	{0,0,0,0},		// irqs
-	{				// Addresses
-	/* Do NOT set compile time defaults HERE!  Use the arrays in
-		ip2.c!  These WILL be overwritten!  =mhw= */
-		0x0000,		// Board 0, ttyF0   - ttyF63
-		0x0000,		// Board 1, ttyF64  - ttyF127
-		0x0000,		// Board 2, ttyF128 - ttyF191
-		0x0000		// Board 3, ttyF192 - ttyF255
-	}
-};
-
-#endif
diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/char/ip2/ip2ioctl.h
deleted file mode 100644
index aa0a9da..0000000
--- a/drivers/char/ip2/ip2ioctl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Driver constants for configuration and tuning
-*
-*   NOTES:
-*
-*******************************************************************************/
-
-#ifndef IP2IOCTL_H
-#define IP2IOCTL_H
-
-//*************
-//* Constants *
-//*************
-
-// High baud rates (if not defined elsewhere.
-#ifndef B153600   
-#	define B153600   0010005
-#endif
-#ifndef B307200   
-#	define B307200   0010006
-#endif
-#ifndef B921600   
-#	define B921600   0010007
-#endif
-
-#endif
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
deleted file mode 100644
index ea7a8fb..0000000
--- a/drivers/char/ip2/ip2main.c
+++ /dev/null
@@ -1,3234 +0,0 @@
-/*
-*
-*   (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Mainline code for the device driver
-*
-*******************************************************************************/
-// ToDo:
-//
-// Fix the immediate DSS_NOW problem.
-// Work over the channel stats return logic in ip2_ipl_ioctl so they
-//	make sense for all 256 possible channels and so the user space
-//	utilities will compile and work properly.
-//
-// Done:
-//
-// 1.2.14	/\/\|=mhw=|\/\/
-// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
-// Changed the definition of ip2trace to be more consistent with kernel style
-//	Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
-//
-// 1.2.13	/\/\|=mhw=|\/\/
-// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
-//	to agreed devfs serial device naming convention.
-//
-// 1.2.12	/\/\|=mhw=|\/\/
-// Cleaned up some remove queue cut and paste errors
-//
-// 1.2.11	/\/\|=mhw=|\/\/
-// Clean up potential NULL pointer dereferences
-// Clean up devfs registration
-// Add kernel command line parsing for io and irq
-//	Compile defaults for io and irq are now set in ip2.c not ip2.h!
-// Reworked poll_only hack for explicit parameter setting
-//	You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
-// Merged ip2_loadmain and old_ip2_init
-// Converted all instances of interruptible_sleep_on into queue calls
-//	Most of these had no race conditions but better to clean up now
-//
-// 1.2.10	/\/\|=mhw=|\/\/
-// Fixed the bottom half interrupt handler and enabled USE_IQI
-//	to split the interrupt handler into a formal top-half / bottom-half
-// Fixed timing window on high speed processors that queued messages to
-// 	the outbound mail fifo faster than the board could handle.
-//
-// 1.2.9
-// Four box EX was barfing on >128k kmalloc, made structure smaller by
-// reducing output buffer size
-//
-// 1.2.8
-// Device file system support (MHW)
-//
-// 1.2.7 
-// Fixed
-// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
-//
-// 1.2.6
-//Fixes DCD problems
-//	DCD was not reported when CLOCAL was set on call to TIOCMGET
-//
-//Enhancements:
-//	TIOCMGET requests and waits for status return
-//	No DSS interrupts enabled except for DCD when needed
-//
-// For internal use only
-//
-//#define IP2DEBUG_INIT
-//#define IP2DEBUG_OPEN
-//#define IP2DEBUG_WRITE
-//#define IP2DEBUG_READ
-//#define IP2DEBUG_IOCTL
-//#define IP2DEBUG_IPL
-
-//#define IP2DEBUG_TRACE
-//#define DEBUG_FIFO
-
-/************/
-/* Includes */
-/************/
-
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/major.h>
-#include <linux/wait.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/termios.h>
-#include <linux/tty_driver.h>
-#include <linux/serial.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-
-#include <linux/cdk.h>
-#include <linux/comstats.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-
-#include "ip2types.h"
-#include "ip2trace.h"
-#include "ip2ioctl.h"
-#include "ip2.h"
-#include "i2ellis.h"
-#include "i2lib.h"
-
-/*****************
- * /proc/ip2mem  *
- *****************/
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-static DEFINE_MUTEX(ip2_mutex);
-static const struct file_operations ip2mem_proc_fops;
-static const struct file_operations ip2_proc_fops;
-
-/********************/
-/* Type Definitions */
-/********************/
-
-/*************/
-/* Constants */
-/*************/
-
-/* String constants to identify ourselves */
-static const char pcName[] = "Computone IntelliPort Plus multiport driver";
-static const char pcVersion[] = "1.2.14";
-
-/* String constants for port names */
-static const char pcDriver_name[] = "ip2";
-static const char pcIpl[] = "ip2ipl";
-
-/***********************/
-/* Function Prototypes */
-/***********************/
-
-/* Global module entry functions */
-
-/* Private (static) functions */
-static int  ip2_open(PTTY, struct file *);
-static void ip2_close(PTTY, struct file *);
-static int  ip2_write(PTTY, const unsigned char *, int);
-static int  ip2_putchar(PTTY, unsigned char);
-static void ip2_flush_chars(PTTY);
-static int  ip2_write_room(PTTY);
-static int  ip2_chars_in_buf(PTTY);
-static void ip2_flush_buffer(PTTY);
-static int  ip2_ioctl(PTTY, UINT, ULONG);
-static void ip2_set_termios(PTTY, struct ktermios *);
-static void ip2_set_line_discipline(PTTY);
-static void ip2_throttle(PTTY);
-static void ip2_unthrottle(PTTY);
-static void ip2_stop(PTTY);
-static void ip2_start(PTTY);
-static void ip2_hangup(PTTY);
-static int  ip2_tiocmget(struct tty_struct *tty);
-static int  ip2_tiocmset(struct tty_struct *tty,
-			 unsigned int set, unsigned int clear);
-static int ip2_get_icount(struct tty_struct *tty,
-		struct serial_icounter_struct *icount);
-
-static void set_irq(int, int);
-static void ip2_interrupt_bh(struct work_struct *work);
-static irqreturn_t ip2_interrupt(int irq, void *dev_id);
-static void ip2_poll(unsigned long arg);
-static inline void service_all_boards(void);
-static void do_input(struct work_struct *);
-static void do_status(struct work_struct *);
-
-static void ip2_wait_until_sent(PTTY,int);
-
-static void set_params (i2ChanStrPtr, struct ktermios *);
-static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
-static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
-
-static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
-static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
-static long ip2_ipl_ioctl(struct file *, UINT, ULONG);
-static int ip2_ipl_open(struct inode *, struct file *);
-
-static int DumpTraceBuffer(char __user *, int);
-static int DumpFifoBuffer( char __user *, int);
-
-static void ip2_init_board(int, const struct firmware *);
-static unsigned short find_eisa_board(int);
-static int ip2_setup(char *str);
-
-/***************/
-/* Static Data */
-/***************/
-
-static struct tty_driver *ip2_tty_driver;
-
-/* Here, then is a table of board pointers which the interrupt routine should
- * scan through to determine who it must service.
- */
-static unsigned short i2nBoards; // Number of boards here
-
-static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
-
-static i2ChanStrPtr  DevTable[IP2_MAX_PORTS];
-//DevTableMem just used to save addresses for kfree
-static void  *DevTableMem[IP2_MAX_BOARDS];
-
-/* This is the driver descriptor for the ip2ipl device, which is used to
- * download the loadware to the boards.
- */
-static const struct file_operations ip2_ipl = {
-	.owner		= THIS_MODULE,
-	.read		= ip2_ipl_read,
-	.write		= ip2_ipl_write,
-	.unlocked_ioctl	= ip2_ipl_ioctl,
-	.open		= ip2_ipl_open,
-	.llseek		= noop_llseek,
-}; 
-
-static unsigned long irq_counter;
-static unsigned long bh_counter;
-
-// Use immediate queue to service interrupts
-#define USE_IQI
-//#define USE_IQ	// PCI&2.2 needs work
-
-/* The timer_list entry for our poll routine. If interrupt operation is not
- * selected, the board is serviced periodically to see if anything needs doing.
- */
-#define  POLL_TIMEOUT   (jiffies + 1)
-static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
-
-#ifdef IP2DEBUG_TRACE
-/* Trace (debug) buffer data */
-#define TRACEMAX  1000
-static unsigned long tracebuf[TRACEMAX];
-static int tracestuff;
-static int tracestrip;
-static int tracewrap;
-#endif
-
-/**********/
-/* Macros */
-/**********/
-
-#ifdef IP2DEBUG_OPEN
-#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
-		    tty->name,(pCh->flags), \
-		    tty->count,/*GET_USE_COUNT(module)*/0,s)
-#else
-#define DBG_CNT(s)
-#endif
-
-/********/
-/* Code */
-/********/
-
-#include "i2ellis.c"    /* Extremely low-level interface services */
-#include "i2cmd.c"      /* Standard loadware command definitions */
-#include "i2lib.c"      /* High level interface services */
-
-/* Configuration area for modprobe */
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-MODULE_LICENSE("GPL");
-
-#define	MAX_CMD_STR	50
-
-static int poll_only;
-static char cmd[MAX_CMD_STR];
-
-static int Eisa_irq;
-static int Eisa_slot;
-
-static int iindx;
-static char rirqs[IP2_MAX_BOARDS];
-static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
-
-/* Note: Add compiled in defaults to these arrays, not to the structure
-	in ip2.h any longer.  That structure WILL get overridden
-	by these values, or command line values, or insmod values!!!  =mhw=
-*/
-static int io[IP2_MAX_BOARDS];
-static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
-module_param(poll_only, bool, 0);
-MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
-module_param_string(ip2, cmd, MAX_CMD_STR, 0);
-MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='");
-
-/* for sysfs class support */
-static struct class *ip2_class;
-
-/* Some functions to keep track of what irqs we have */
-
-static int __init is_valid_irq(int irq)
-{
-	int *i = Valid_Irqs;
-	
-	while (*i != 0 && *i != irq)
-		i++;
-
-	return *i;
-}
-
-static void __init mark_requested_irq(char irq)
-{
-	rirqs[iindx++] = irq;
-}
-
-static int __exit clear_requested_irq(char irq)
-{
-	int i;
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		if (rirqs[i] == irq) {
-			rirqs[i] = 0;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int have_requested_irq(char irq)
-{
-	/* array init to zeros so 0 irq will not be requested as a side
-	 * effect */
-	int i;
-	for (i = 0; i < IP2_MAX_BOARDS; ++i)
-		if (rirqs[i] == irq)
-			return 1;
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   cleanup_module()                                               */
-/* Parameters: None                                                           */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This is a required entry point for an installable module. It has to return */
-/* the device and the driver to a passive state. It should not be necessary   */
-/* to reset the board fully, especially as the loadware is downloaded         */
-/* externally rather than in the driver. We just want to disable the board    */
-/* and clear the loadware to a reset state. To allow this there has to be a   */
-/* way to detect whether the board has the loadware running at init time to   */
-/* handle subsequent installations of the driver. All memory allocated by the */
-/* driver should be returned since it may be unloaded from memory.            */
-/******************************************************************************/
-static void __exit ip2_cleanup_module(void)
-{
-	int err;
-	int i;
-
-	del_timer_sync(&PollTimer);
-
-	/* Reset the boards we have. */
-	for (i = 0; i < IP2_MAX_BOARDS; i++)
-		if (i2BoardPtrTable[i])
-			iiReset(i2BoardPtrTable[i]);
-
-	/* The following is done at most once, if any boards were installed. */
-	for (i = 0; i < IP2_MAX_BOARDS; i++) {
-		if (i2BoardPtrTable[i]) {
-			iiResetDelay(i2BoardPtrTable[i]);
-			/* free io addresses and Tibet */
-			release_region(ip2config.addr[i], 8);
-			device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
-			device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR,
-						4 * i + 1));
-		}
-		/* Disable and remove interrupt handler. */
-		if (ip2config.irq[i] > 0 &&
-				have_requested_irq(ip2config.irq[i])) {
-			free_irq(ip2config.irq[i], (void *)&pcName);
-			clear_requested_irq(ip2config.irq[i]);
-		}
-	}
-	class_destroy(ip2_class);
-	err = tty_unregister_driver(ip2_tty_driver);
-	if (err)
-		printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
-				err);
-	put_tty_driver(ip2_tty_driver);
-	unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
-	remove_proc_entry("ip2mem", NULL);
-
-	/* free memory */
-	for (i = 0; i < IP2_MAX_BOARDS; i++) {
-		void *pB;
-#ifdef CONFIG_PCI
-		if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
-			pci_disable_device(ip2config.pci_dev[i]);
-			pci_dev_put(ip2config.pci_dev[i]);
-			ip2config.pci_dev[i] = NULL;
-		}
-#endif
-		pB = i2BoardPtrTable[i];
-		if (pB != NULL) {
-			kfree(pB);
-			i2BoardPtrTable[i] = NULL;
-		}
-		if (DevTableMem[i] != NULL) {
-			kfree(DevTableMem[i]);
-			DevTableMem[i] = NULL;
-		}
-	}
-}
-module_exit(ip2_cleanup_module);
-
-static const struct tty_operations ip2_ops = {
-	.open            = ip2_open,
-	.close           = ip2_close,
-	.write           = ip2_write,
-	.put_char        = ip2_putchar,
-	.flush_chars     = ip2_flush_chars,
-	.write_room      = ip2_write_room,
-	.chars_in_buffer = ip2_chars_in_buf,
-	.flush_buffer    = ip2_flush_buffer,
-	.ioctl           = ip2_ioctl,
-	.throttle        = ip2_throttle,
-	.unthrottle      = ip2_unthrottle,
-	.set_termios     = ip2_set_termios,
-	.set_ldisc       = ip2_set_line_discipline,
-	.stop            = ip2_stop,
-	.start           = ip2_start,
-	.hangup          = ip2_hangup,
-	.tiocmget	 = ip2_tiocmget,
-	.tiocmset	 = ip2_tiocmset,
-	.get_icount	 = ip2_get_icount,
-	.proc_fops	 = &ip2_proc_fops,
-};
-
-/******************************************************************************/
-/* Function:   ip2_loadmain()                                                 */
-/* Parameters: irq, io from command line of insmod et. al.                    */
-/*		pointer to fip firmware and firmware size for boards	      */
-/* Returns:    Success (0)                                                    */
-/*                                                                            */
-/* Description:                                                               */
-/* This was the required entry point for all drivers (now in ip2.c)           */
-/* It performs all                                                            */
-/* initialisation of the devices and driver structures, and registers itself  */
-/* with the relevant kernel modules.                                          */
-/******************************************************************************/
-/* IRQF_DISABLED - if set blocks all interrupts else only this line */
-/* IRQF_SHARED    - for shared irq PCI or maybe EISA only */
-/* SA_RANDOM   - can be source for cert. random number generators */
-#define IP2_SA_FLAGS	0
-
-
-static const struct firmware *ip2_request_firmware(void)
-{
-	struct platform_device *pdev;
-	const struct firmware *fw;
-
-	pdev = platform_device_register_simple("ip2", 0, NULL, 0);
-	if (IS_ERR(pdev)) {
-		printk(KERN_ERR "Failed to register platform device for ip2\n");
-		return NULL;
-	}
-	if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) {
-		printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n");
-		fw = NULL;
-	}
-	platform_device_unregister(pdev);
-	return fw;
-}
-
-/******************************************************************************
- *	ip2_setup:
- *		str: kernel command line string
- *
- *	Can't autoprobe the boards so user must specify configuration on
- *	kernel command line.  Sane people build it modular but the others
- *	come here.
- *
- *	Alternating pairs of io,irq for up to 4 boards.
- *		ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
- *
- *		io=0 => No board
- *		io=1 => PCI
- *		io=2 => EISA
- *		else => ISA I/O address
- *
- *		irq=0 or invalid for ISA will revert to polling mode
- *
- *		Any value = -1, do not overwrite compiled in value.
- *
- ******************************************************************************/
-static int __init ip2_setup(char *str)
-{
-	int j, ints[10];	/* 4 boards, 2 parameters + 2 */
-	unsigned int i;
-
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	for (i = 0, j = 1; i < 4; i++) {
-		if (j > ints[0])
-			break;
-		if (ints[j] >= 0)
-			io[i] = ints[j];
-		j++;
-		if (j > ints[0])
-			break;
-		if (ints[j] >= 0)
-			irq[i] = ints[j];
-		j++;
-	}
-	return 1;
-}
-__setup("ip2=", ip2_setup);
-
-static int __init ip2_loadmain(void)
-{
-	int i, j, box;
-	int err = 0;
-	i2eBordStrPtr pB = NULL;
-	int rc = -1;
-	const struct firmware *fw = NULL;
-	char *str;
-
-	str = cmd;
-
-	if (poll_only) {
-		/* Hard lock the interrupts to zero */
-		irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
-	}
-
-	/* Check module parameter with 'ip2=' has been passed or not */
-	if (!poll_only && (!strncmp(str, "ip2=", 4)))
-		ip2_setup(str);
-
-	ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
-
-	/* process command line arguments to modprobe or
-		insmod i.e. iop & irqp */
-	/* irqp and iop should ALWAYS be specified now...  But we check
-		them individually just to be sure, anyways... */
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		ip2config.addr[i] = io[i];
-		if (irq[i] >= 0)
-			ip2config.irq[i] = irq[i];
-		else
-			ip2config.irq[i] = 0;
-	/* This is a little bit of a hack.  If poll_only=1 on command
-	   line back in ip2.c OR all IRQs on all specified boards are
-	   explicitly set to 0, then drop to poll only mode and override
-	   PCI or EISA interrupts.  This superceeds the old hack of
-	   triggering if all interrupts were zero (like da default).
-	   Still a hack but less prone to random acts of terrorism.
-
-	   What we really should do, now that the IRQ default is set
-	   to -1, is to use 0 as a hard coded, do not probe.
-
-		/\/\|=mhw=|\/\/
-	*/
-		poll_only |= irq[i];
-	}
-	poll_only = !poll_only;
-
-	/* Announce our presence */
-	printk(KERN_INFO "%s version %s\n", pcName, pcVersion);
-
-	ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
-	if (!ip2_tty_driver)
-		return -ENOMEM;
-
-	/* Initialise all the boards we can find (up to the maximum). */
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		switch (ip2config.addr[i]) {
-		case 0:	/* skip this slot even if card is present */
-			break;
-		default: /* ISA */
-		   /* ISA address must be specified */
-			if (ip2config.addr[i] < 0x100 ||
-					ip2config.addr[i] > 0x3f8) {
-				printk(KERN_ERR "IP2: Bad ISA board %d "
-						"address %x\n", i,
-						ip2config.addr[i]);
-				ip2config.addr[i] = 0;
-				break;
-			}
-			ip2config.type[i] = ISA;
-
-			/* Check for valid irq argument, set for polling if
-			 * invalid */
-			if (ip2config.irq[i] &&
-					!is_valid_irq(ip2config.irq[i])) {
-				printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",
-						ip2config.irq[i]);
-				/* 0 is polling and is valid in that sense */
-				ip2config.irq[i] = 0;
-			}
-			break;
-		case PCI:
-#ifdef CONFIG_PCI
-		{
-			struct pci_dev *pdev = NULL;
-			u32 addr;
-			int status;
-
-			pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
-					PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev);
-			if (pdev == NULL) {
-				ip2config.addr[i] = 0;
-				printk(KERN_ERR "IP2: PCI board %d not "
-						"found\n", i);
-				break;
-			}
-
-			if (pci_enable_device(pdev)) {
-				dev_err(&pdev->dev, "can't enable device\n");
-				goto out;
-			}
-			ip2config.type[i] = PCI;
-			ip2config.pci_dev[i] = pci_dev_get(pdev);
-			status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1,
-					&addr);
-			if (addr & 1)
-				ip2config.addr[i] = (USHORT)(addr & 0xfffe);
-			else
-				dev_err(&pdev->dev, "I/O address error\n");
-
-			ip2config.irq[i] = pdev->irq;
-out:
-			pci_dev_put(pdev);
-		}
-#else
-			printk(KERN_ERR "IP2: PCI card specified but PCI "
-					"support not enabled.\n");
-			printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI "
-					"defined!\n");
-#endif /* CONFIG_PCI */
-			break;
-		case EISA:
-			ip2config.addr[i] = find_eisa_board(Eisa_slot + 1);
-			if (ip2config.addr[i] != 0) {
-				/* Eisa_irq set as side effect, boo */
-				ip2config.type[i] = EISA;
-			} 
-			ip2config.irq[i] = Eisa_irq;
-			break;
-		}	/* switch */
-	}	/* for */
-
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		if (ip2config.addr[i]) {
-			pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
-			if (pB) {
-				i2BoardPtrTable[i] = pB;
-				iiSetAddress(pB, ip2config.addr[i],
-						ii2DelayTimer);
-				iiReset(pB);
-			} else
-				printk(KERN_ERR "IP2: board memory allocation "
-						"error\n");
-		}
-	}
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		pB = i2BoardPtrTable[i];
-		if (pB != NULL) {
-			iiResetDelay(pB);
-			break;
-		}
-	}
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		/* We don't want to request the firmware unless we have at
-		   least one board */
-		if (i2BoardPtrTable[i] != NULL) {
-			if (!fw)
-				fw = ip2_request_firmware();
-			if (!fw)
-				break;
-			ip2_init_board(i, fw);
-		}
-	}
-	if (fw)
-		release_firmware(fw);
-
-	ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0);
-
-	ip2_tty_driver->owner		    = THIS_MODULE;
-	ip2_tty_driver->name                 = "ttyF";
-	ip2_tty_driver->driver_name          = pcDriver_name;
-	ip2_tty_driver->major                = IP2_TTY_MAJOR;
-	ip2_tty_driver->minor_start          = 0;
-	ip2_tty_driver->type                 = TTY_DRIVER_TYPE_SERIAL;
-	ip2_tty_driver->subtype              = SERIAL_TYPE_NORMAL;
-	ip2_tty_driver->init_termios         = tty_std_termios;
-	ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
-	ip2_tty_driver->flags                = TTY_DRIVER_REAL_RAW |
-		TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(ip2_tty_driver, &ip2_ops);
-
-	ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0);
-
-	err = tty_register_driver(ip2_tty_driver);
-	if (err) {
-		printk(KERN_ERR "IP2: failed to register tty driver\n");
-		put_tty_driver(ip2_tty_driver);
-		return err; /* leaking resources */
-	}
-
-	err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl);
-	if (err) {
-		printk(KERN_ERR "IP2: failed to register IPL device (%d)\n",
-				err);
-	} else {
-		/* create the sysfs class */
-		ip2_class = class_create(THIS_MODULE, "ip2");
-		if (IS_ERR(ip2_class)) {
-			err = PTR_ERR(ip2_class);
-			goto out_chrdev;	
-		}
-	}
-	/* Register the read_procmem thing */
-	if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
-		printk(KERN_ERR "IP2: failed to register read_procmem\n");
-		return -EIO; /* leaking resources */
-	}
-
-	ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0);
-	/* Register the interrupt handler or poll handler, depending upon the
-	 * specified interrupt.
-	 */
-
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		if (ip2config.addr[i] == 0)
-			continue;
-
-		pB = i2BoardPtrTable[i];
-		if (pB != NULL) {
-			device_create(ip2_class, NULL,
-				      MKDEV(IP2_IPL_MAJOR, 4 * i),
-				      NULL, "ipl%d", i);
-			device_create(ip2_class, NULL,
-				      MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
-				      NULL, "stat%d", i);
-
-			for (box = 0; box < ABS_MAX_BOXES; box++)
-				for (j = 0; j < ABS_BIGGEST_BOX; j++)
-					if (pB->i2eChannelMap[box] & (1 << j))
-						tty_register_device(
-							ip2_tty_driver,
-							j + ABS_BIGGEST_BOX *
-							(box+i*ABS_MAX_BOXES),
-							NULL);
-		}
-
-		if (poll_only) {
-			/* Poll only forces driver to only use polling and
-			   to ignore the probed PCI or EISA interrupts. */
-			ip2config.irq[i] = CIR_POLL;
-		}
-		if (ip2config.irq[i] == CIR_POLL) {
-retry:
-			if (!timer_pending(&PollTimer)) {
-				mod_timer(&PollTimer, POLL_TIMEOUT);
-				printk(KERN_INFO "IP2: polling\n");
-			}
-		} else {
-			if (have_requested_irq(ip2config.irq[i]))
-				continue;
-			rc = request_irq(ip2config.irq[i], ip2_interrupt,
-				IP2_SA_FLAGS |
-				(ip2config.type[i] == PCI ? IRQF_SHARED : 0),
-				pcName, i2BoardPtrTable[i]);
-			if (rc) {
-				printk(KERN_ERR "IP2: request_irq failed: "
-						"error %d\n", rc);
-				ip2config.irq[i] = CIR_POLL;
-				printk(KERN_INFO "IP2: Polling %ld/sec.\n",
-						(POLL_TIMEOUT - jiffies));
-				goto retry;
-			}
-			mark_requested_irq(ip2config.irq[i]);
-			/* Initialise the interrupt handler bottom half
-			 * (aka slih). */
-		}
-	}
-
-	for (i = 0; i < IP2_MAX_BOARDS; ++i) {
-		if (i2BoardPtrTable[i]) {
-			/* set and enable board interrupt */
-			set_irq(i, ip2config.irq[i]);
-		}
-	}
-
-	ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0);
-
-	return 0;
-
-out_chrdev:
-	unregister_chrdev(IP2_IPL_MAJOR, "ip2");
-	/* unregister and put tty here */
-	return err;
-}
-module_init(ip2_loadmain);
-
-/******************************************************************************/
-/* Function:   ip2_init_board()                                               */
-/* Parameters: Index of board in configuration structure                      */
-/* Returns:    Success (0)                                                    */
-/*                                                                            */
-/* Description:                                                               */
-/* This function initializes the specified board. The loadware is copied to   */
-/* the board, the channel structures are initialized, and the board details   */
-/* are reported on the console.                                               */
-/******************************************************************************/
-static void
-ip2_init_board(int boardnum, const struct firmware *fw)
-{
-	int i;
-	int nports = 0, nboxes = 0;
-	i2ChanStrPtr pCh;
-	i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
-
-	if ( !iiInitialize ( pB ) ) {
-		printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
-			 pB->i2eBase, pB->i2eError );
-		goto err_initialize;
-	}
-	printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
-	       ip2config.addr[boardnum], ip2config.irq[boardnum] );
-
-	if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
-		printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
-		goto err_initialize;
-	}
-
-	if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size )
-	    != II_DOWN_GOOD ) {
-		printk ( KERN_ERR "IP2: failed to download loadware\n" );
-		goto err_release_region;
-	} else {
-		printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
-			 pB->i2ePom.e.porVersion,
-			 pB->i2ePom.e.porRevision,
-			 pB->i2ePom.e.porSubRev, pB->i2eLVersion,
-			 pB->i2eLRevision, pB->i2eLSub );
-	}
-
-	switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
-
-	default:
-		printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
-				pB->i2ePom.e.porID );
-		nports = 0;
-		goto err_release_region;
-		break;
-
-	case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
-		printk ( KERN_INFO "IP2: ISA-4\n" );
-		nports = 4;
-		break;
-
-	case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
-		printk ( KERN_INFO "IP2: ISA-8 std\n" );
-		nports = 8;
-		break;
-
-	case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
-		printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
-		nports = 8;
-		break;
-
-	case POR_ID_FIIEX: /* IntelliPort IIEX */
-	{
-		int portnum = IP2_PORTS_PER_BOARD * boardnum;
-		int            box;
-
-		for( box = 0; box < ABS_MAX_BOXES; ++box ) {
-			if ( pB->i2eChannelMap[box] != 0 ) {
-				++nboxes;
-			}
-			for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
-				if ( pB->i2eChannelMap[box] & 1<< i ) {
-					++nports;
-				}
-			}
-		}
-		DevTableMem[boardnum] = pCh =
-			kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
-		if ( !pCh ) {
-			printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
-			goto err_release_region;
-		}
-		if ( !i2InitChannels( pB, nports, pCh ) ) {
-			printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
-			kfree ( pCh );
-			goto err_release_region;
-		}
-		pB->i2eChannelPtr = &DevTable[portnum];
-		pB->i2eChannelCnt = ABS_MOST_PORTS;
-
-		for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
-			for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
-				if ( pB->i2eChannelMap[box] & (1 << i) ) {
-					DevTable[portnum + i] = pCh;
-					pCh->port_index = portnum + i;
-					pCh++;
-				}
-			}
-		}
-		printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
-			nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
-		}
-		goto ex_exit;
-	}
-	DevTableMem[boardnum] = pCh =
-		kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
-	if ( !pCh ) {
-		printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
-		goto err_release_region;
-	}
-	pB->i2eChannelPtr = pCh;
-	pB->i2eChannelCnt = nports;
-	if ( !i2InitChannels( pB, nports, pCh ) ) {
-		printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
-		kfree ( pCh );
-		goto err_release_region;
-	}
-	pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
-
-	for( i = 0; i < pB->i2eChannelCnt; ++i ) {
-		DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
-		pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
-		pCh++;
-	}
-ex_exit:
-	INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh);
-	return;
-
-err_release_region:
-	release_region(ip2config.addr[boardnum], 8);
-err_initialize:
-	kfree ( pB );
-	i2BoardPtrTable[boardnum] = NULL;
-	return;
-}
-
-/******************************************************************************/
-/* Function:   find_eisa_board ( int start_slot )                             */
-/* Parameters: First slot to check                                            */
-/* Returns:    Address of EISA IntelliPort II controller                      */
-/*                                                                            */
-/* Description:                                                               */
-/* This function searches for an EISA IntelliPort controller, starting        */
-/* from the specified slot number. If the motherboard is not identified as an */
-/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
-/* it returns the base address of the controller.                             */
-/******************************************************************************/
-static unsigned short
-find_eisa_board( int start_slot )
-{
-	int i, j;
-	unsigned int idm = 0;
-	unsigned int idp = 0;
-	unsigned int base = 0;
-	unsigned int value;
-	int setup_address;
-	int setup_irq;
-	int ismine = 0;
-
-	/*
-	 * First a check for an EISA motherboard, which we do by comparing the
-	 * EISA ID registers for the system board and the first couple of slots.
-	 * No slot ID should match the system board ID, but on an ISA or PCI
-	 * machine the odds are that an empty bus will return similar values for
-	 * each slot.
-	 */
-	i = 0x0c80;
-	value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
-	for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
-		j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
-		if ( value == j )
-			return 0;
-	}
-
-	/*
-	 * OK, so we are inclined to believe that this is an EISA machine. Find
-	 * an IntelliPort controller.
-	 */
-	for( i = start_slot; i < 16; i++ ) {
-		base = i << 12;
-		idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
-		idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
-		ismine = 0;
-		if ( idm == 0x0e8e ) {
-			if ( idp == 0x0281 || idp == 0x0218 ) {
-				ismine = 1;
-			} else if ( idp == 0x0282 || idp == 0x0283 ) {
-				ismine = 3;	/* Can do edge-trigger */
-			}
-			if ( ismine ) {
-				Eisa_slot = i;
-				break;
-			}
-		}
-	}
-	if ( !ismine )
-		return 0;
-
-	/* It's some sort of EISA card, but at what address is it configured? */
-
-	setup_address = base + 0xc88;
-	value = inb(base + 0xc86);
-	setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
-
-	if ( (ismine & 2) && !(value & 0x10) ) {
-		ismine = 1;	/* Could be edging, but not */
-	}
-
-	if ( Eisa_irq == 0 ) {
-		Eisa_irq = setup_irq;
-	} else if ( Eisa_irq != setup_irq ) {
-		printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
-	}
-
-#ifdef IP2DEBUG_INIT
-printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
-	       base >> 12, idm, idp, setup_address);
-	if ( Eisa_irq ) {
-		printk(KERN_DEBUG ", Interrupt %d %s\n",
-		       setup_irq, (ismine & 2) ? "(edge)" : "(level)");
-	} else {
-		printk(KERN_DEBUG ", (polled)\n");
-	}
-#endif
-	return setup_address;
-}
-
-/******************************************************************************/
-/* Function:   set_irq()                                                      */
-/* Parameters: index to board in board table                                  */
-/*             IRQ to use                                                     */
-/* Returns:    Success (0)                                                    */
-/*                                                                            */
-/* Description:                                                               */
-/******************************************************************************/
-static void
-set_irq( int boardnum, int boardIrq )
-{
-	unsigned char tempCommand[16];
-	i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
-	unsigned long flags;
-
-	/*
-	 * Notify the boards they may generate interrupts. This is done by
-	 * sending an in-line command to channel 0 on each board. This is why
-	 * the channels have to be defined already. For each board, if the
-	 * interrupt has never been defined, we must do so NOW, directly, since
-	 * board will not send flow control or even give an interrupt until this
-	 * is done.  If polling we must send 0 as the interrupt parameter.
-	 */
-
-	// We will get an interrupt here at the end of this function
-
-	iiDisableMailIrq(pB);
-
-	/* We build up the entire packet header. */
-	CHANNEL_OF(tempCommand) = 0;
-	PTYPE_OF(tempCommand) = PTYPE_INLINE;
-	CMD_COUNT_OF(tempCommand) = 2;
-	(CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
-	(CMD_OF(tempCommand))[1] = boardIrq;
-	/*
-	 * Write to FIFO; don't bother to adjust fifo capacity for this, since
-	 * board will respond almost immediately after SendMail hit.
-	 */
-	write_lock_irqsave(&pB->write_fifo_spinlock, flags);
-	iiWriteBuf(pB, tempCommand, 4);
-	write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-	pB->i2eUsingIrq = boardIrq;
-	pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
-
-	/* Need to update number of boards before you enable mailbox int */
-	++i2nBoards;
-
-	CHANNEL_OF(tempCommand) = 0;
-	PTYPE_OF(tempCommand) = PTYPE_BYPASS;
-	CMD_COUNT_OF(tempCommand) = 6;
-	(CMD_OF(tempCommand))[0] = 88;	// SILO
-	(CMD_OF(tempCommand))[1] = 64;	// chars
-	(CMD_OF(tempCommand))[2] = 32;	// ms
-
-	(CMD_OF(tempCommand))[3] = 28;	// MAX_BLOCK
-	(CMD_OF(tempCommand))[4] = 64;	// chars
-
-	(CMD_OF(tempCommand))[5] = 87;	// HW_TEST
-	write_lock_irqsave(&pB->write_fifo_spinlock, flags);
-	iiWriteBuf(pB, tempCommand, 8);
-	write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-
-	CHANNEL_OF(tempCommand) = 0;
-	PTYPE_OF(tempCommand) = PTYPE_BYPASS;
-	CMD_COUNT_OF(tempCommand) = 1;
-	(CMD_OF(tempCommand))[0] = 84;	/* get BOX_IDS */
-	iiWriteBuf(pB, tempCommand, 3);
-
-#ifdef XXX
-	// enable heartbeat for test porpoises
-	CHANNEL_OF(tempCommand) = 0;
-	PTYPE_OF(tempCommand) = PTYPE_BYPASS;
-	CMD_COUNT_OF(tempCommand) = 2;
-	(CMD_OF(tempCommand))[0] = 44;	/* get ping */
-	(CMD_OF(tempCommand))[1] = 200;	/* 200 ms */
-	write_lock_irqsave(&pB->write_fifo_spinlock, flags);
-	iiWriteBuf(pB, tempCommand, 4);
-	write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-#endif
-
-	iiEnableMailIrq(pB);
-	iiSendPendingMail(pB);
-}
-
-/******************************************************************************/
-/* Interrupt Handler Section                                                  */
-/******************************************************************************/
-
-static inline void
-service_all_boards(void)
-{
-	int i;
-	i2eBordStrPtr  pB;
-
-	/* Service every board on the list */
-	for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
-		pB = i2BoardPtrTable[i];
-		if ( pB ) {
-			i2ServiceBoard( pB );
-		}
-	}
-}
-
-
-/******************************************************************************/
-/* Function:   ip2_interrupt_bh(work)                                         */
-/* Parameters: work - pointer to the board structure                          */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*	Service the board in a bottom half interrupt handler and then         */
-/*	reenable the board's interrupts if it has an IRQ number               */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_interrupt_bh(struct work_struct *work)
-{
-	i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt);
-//	pB better well be set or we have a problem!  We can only get
-//	here from the IMMEDIATE queue.  Here, we process the boards.
-//	Checking pB doesn't cost much and it saves us from the sanity checkers.
-
-	bh_counter++; 
-
-	if ( pB ) {
-		i2ServiceBoard( pB );
-		if( pB->i2eUsingIrq ) {
-//			Re-enable his interrupts
-			iiEnableMailIrq(pB);
-		}
-	}
-}
-
-
-/******************************************************************************/
-/* Function:   ip2_interrupt(int irq, void *dev_id)    */
-/* Parameters: irq - interrupt number                                         */
-/*             pointer to optional device ID structure                        */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*	Our task here is simply to identify each board which needs servicing. */
-/*	If we are queuing then, queue it to be serviced, and disable its irq  */
-/*	mask otherwise process the board directly.                            */
-/*                                                                            */
-/*	We could queue by IRQ but that just complicates things on both ends   */
-/*	with very little gain in performance (how many instructions does      */
-/*	it take to iterate on the immediate queue).                           */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_irq_work(i2eBordStrPtr pB)
-{
-#ifdef USE_IQI
-	if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
-//		Disable his interrupt (will be enabled when serviced)
-//		This is mostly to protect from reentrancy.
-		iiDisableMailIrq(pB);
-
-//		Park the board on the immediate queue for processing.
-		schedule_work(&pB->tqueue_interrupt);
-
-//		Make sure the immediate queue is flagged to fire.
-	}
-#else
-
-//	We are using immediate servicing here.  This sucks and can
-//	cause all sorts of havoc with ppp and others.  The failsafe
-//	check on iiSendPendingMail could also throw a hairball.
-
-	i2ServiceBoard( pB );
-
-#endif /* USE_IQI */
-}
-
-static void
-ip2_polled_interrupt(void)
-{
-	int i;
-	i2eBordStrPtr  pB;
-
-	ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0);
-
-	/* Service just the boards on the list using this irq */
-	for( i = 0; i < i2nBoards; ++i ) {
-		pB = i2BoardPtrTable[i];
-
-//		Only process those boards which match our IRQ.
-//			IRQ = 0 for polled boards, we won't poll "IRQ" boards
-
-		if (pB && pB->i2eUsingIrq == 0)
-			ip2_irq_work(pB);
-	}
-
-	++irq_counter;
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
-}
-
-static irqreturn_t
-ip2_interrupt(int irq, void *dev_id)
-{
-	i2eBordStrPtr pB = dev_id;
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq );
-
-	ip2_irq_work(pB);
-
-	++irq_counter;
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************/
-/* Function:   ip2_poll(unsigned long arg)                                    */
-/* Parameters: ?                                                              */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This function calls the library routine i2ServiceBoard for each board in   */
-/* the board table. This is used instead of the interrupt routine when polled */
-/* mode is specified.                                                         */
-/******************************************************************************/
-static void
-ip2_poll(unsigned long arg)
-{
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
-
-	// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
-	// It will NOT poll boards handled by hard interrupts.
-	// The issue of queued BH interrupts is handled in ip2_interrupt().
-	ip2_polled_interrupt();
-
-	mod_timer(&PollTimer, POLL_TIMEOUT);
-
-	ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
-}
-
-static void do_input(struct work_struct *work)
-{
-	i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input);
-	unsigned long flags;
-
-	ip2trace(CHANN, ITRC_INPUT, 21, 0 );
-
-	// Data input
-	if ( pCh->pTTY != NULL ) {
-		read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-		if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
-			read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-			i2Input( pCh );
-		} else
-			read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-	} else {
-		ip2trace(CHANN, ITRC_INPUT, 22, 0 );
-
-		i2InputFlush( pCh );
-	}
-}
-
-// code duplicated from n_tty (ldisc)
-static inline void  isig(int sig, struct tty_struct *tty, int flush)
-{
-	/* FIXME: This is completely bogus */
-	if (tty->pgrp)
-		kill_pgrp(tty->pgrp, sig, 1);
-	if (flush || !L_NOFLSH(tty)) {
-		if ( tty->ldisc->ops->flush_buffer )  
-			tty->ldisc->ops->flush_buffer(tty);
-		i2InputFlush( tty->driver_data );
-	}
-}
-
-static void do_status(struct work_struct *work)
-{
-	i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status);
-	int status;
-
-	status =  i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
-
-	ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
-
-	if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
-		if ( (status & I2_BRK) ) {
-			// code duplicated from n_tty (ldisc)
-			if (I_IGNBRK(pCh->pTTY))
-				goto skip_this;
-			if (I_BRKINT(pCh->pTTY)) {
-				isig(SIGINT, pCh->pTTY, 1);
-				goto skip_this;
-			}
-			wake_up_interruptible(&pCh->pTTY->read_wait);
-		}
-#ifdef NEVER_HAPPENS_AS_SETUP_XXX
-	// and can't work because we don't know the_char
-	// as the_char is reported on a separate path
-	// The intelligent board does this stuff as setup
-	{
-	char brkf = TTY_NORMAL;
-	unsigned char brkc = '\0';
-	unsigned char tmp;
-		if ( (status & I2_BRK) ) {
-			brkf = TTY_BREAK;
-			brkc = '\0';
-		} 
-		else if (status & I2_PAR) {
-			brkf = TTY_PARITY;
-			brkc = the_char;
-		} else if (status & I2_FRA) {
-			brkf = TTY_FRAME;
-			brkc = the_char;
-		} else if (status & I2_OVR) {
-			brkf = TTY_OVERRUN;
-			brkc = the_char;
-		}
-		tmp = pCh->pTTY->real_raw;
-		pCh->pTTY->real_raw = 0;
-		pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
-		pCh->pTTY->real_raw = tmp;
-	}
-#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
-	}
-skip_this:
-
-	if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
-		wake_up_interruptible(&pCh->delta_msr_wait);
-
-		if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
-			if ( status & I2_DCD ) {
-				if ( pCh->wopen ) {
-					wake_up_interruptible ( &pCh->open_wait );
-				}
-			} else {
-				if (pCh->pTTY &&  (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
-					tty_hangup( pCh->pTTY );
-				}
-			}
-		}
-	}
-
-	ip2trace (CHANN, ITRC_STATUS, 26, 0 );
-}
-
-/******************************************************************************/
-/* Device Open/Close/Ioctl Entry Point Section                                */
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function:   open_sanity_check()                                            */
-/* Parameters: Pointer to tty structure                                       */
-/*             Pointer to file structure                                      */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:                                                               */
-/* Verifies the structure magic numbers and cross links.                      */
-/******************************************************************************/
-#ifdef IP2DEBUG_OPEN
-static void 
-open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
-{
-	if ( pBrd->i2eValid != I2E_MAGIC ) {
-		printk(KERN_ERR "IP2: invalid board structure\n" );
-	} else if ( pBrd != pCh->pMyBord ) {
-		printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
-			 pCh->pMyBord );
-	} else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
-		printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
-	} else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
-	} else {
-		printk(KERN_INFO "IP2: all pointers check out!\n" );
-	}
-}
-#endif
-
-
-/******************************************************************************/
-/* Function:   ip2_open()                                                     */
-/* Parameters: Pointer to tty structure                                       */
-/*             Pointer to file structure                                      */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description: (MANDATORY)                                                   */
-/* A successful device open has to run a gauntlet of checks before it         */
-/* completes. After some sanity checking and pointer setup, the function      */
-/* blocks until all conditions are satisfied. It then initialises the port to */
-/* the default characteristics and returns.                                   */
-/******************************************************************************/
-static int
-ip2_open( PTTY tty, struct file *pFile )
-{
-	wait_queue_t wait;
-	int rc = 0;
-	int do_clocal = 0;
-	i2ChanStrPtr  pCh = DevTable[tty->index];
-
-	ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
-
-	if ( pCh == NULL ) {
-		return -ENODEV;
-	}
-	/* Setup pointer links in device and tty structures */
-	pCh->pTTY = tty;
-	tty->driver_data = pCh;
-
-#ifdef IP2DEBUG_OPEN
-	printk(KERN_DEBUG \
-			"IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
-	       tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
-	open_sanity_check ( pCh, pCh->pMyBord );
-#endif
-
-	i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
-	pCh->dataSetOut |= (I2_DTR | I2_RTS);
-	serviceOutgoingFifo( pCh->pMyBord );
-
-	/* Block here until the port is ready (per serial and istallion) */
-	/*
-	 * 1. If the port is in the middle of closing wait for the completion
-	 *    and then return the appropriate error.
-	 */
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&pCh->close_wait, &wait);
-	set_current_state( TASK_INTERRUPTIBLE );
-
-	if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
-		if ( pCh->flags & ASYNC_CLOSING ) {
-			tty_unlock();
-			schedule();
-			tty_lock();
-		}
-		if ( tty_hung_up_p(pFile) ) {
-			set_current_state( TASK_RUNNING );
-			remove_wait_queue(&pCh->close_wait, &wait);
-			return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
-		}
-	}
-	set_current_state( TASK_RUNNING );
-	remove_wait_queue(&pCh->close_wait, &wait);
-
-	/*
-	 * 3. Handle a non-blocking open of a normal port.
-	 */
-	if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
-		pCh->flags |= ASYNC_NORMAL_ACTIVE;
-		goto noblock;
-	}
-	/*
-	 * 4. Now loop waiting for the port to be free and carrier present
-	 *    (if required).
-	 */
-	if ( tty->termios->c_cflag & CLOCAL )
-		do_clocal = 1;
-
-#ifdef IP2DEBUG_OPEN
-	printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
-#endif
-
-	++pCh->wopen;
-
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&pCh->open_wait, &wait);
-
-	for(;;) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
-		pCh->dataSetOut |= (I2_DTR | I2_RTS);
-		set_current_state( TASK_INTERRUPTIBLE );
-		serviceOutgoingFifo( pCh->pMyBord );
-		if ( tty_hung_up_p(pFile) ) {
-			set_current_state( TASK_RUNNING );
-			remove_wait_queue(&pCh->open_wait, &wait);
-			return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
-		}
-		if (!(pCh->flags & ASYNC_CLOSING) && 
-				(do_clocal || (pCh->dataSetIn & I2_DCD) )) {
-			rc = 0;
-			break;
-		}
-
-#ifdef IP2DEBUG_OPEN
-		printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
-			(pCh->flags & ASYNC_CLOSING)?"True":"False");
-		printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
-#endif
-		ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
-				(pCh->flags & ASYNC_CLOSING) );
-		/* check for signal */
-		if (signal_pending(current)) {
-			rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
-			break;
-		}
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	set_current_state( TASK_RUNNING );
-	remove_wait_queue(&pCh->open_wait, &wait);
-
-	--pCh->wopen; //why count?
-
-	ip2trace (CHANN, ITRC_OPEN, 4, 0 );
-
-	if (rc != 0 ) {
-		return rc;
-	}
-	pCh->flags |= ASYNC_NORMAL_ACTIVE;
-
-noblock:
-
-	/* first open - Assign termios structure to port */
-	if ( tty->count == 1 ) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
-		/* Now we must send the termios settings to the loadware */
-		set_params( pCh, NULL );
-	}
-
-	/*
-	 * Now set any i2lib options. These may go away if the i2lib code ends
-	 * up rolled into the mainline.
-	 */
-	pCh->channelOptions |= CO_NBLOCK_WRITE;
-
-#ifdef IP2DEBUG_OPEN
-	printk (KERN_DEBUG "IP2: open completed\n" );
-#endif
-	serviceOutgoingFifo( pCh->pMyBord );
-
-	ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
-
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   ip2_close()                                                    */
-/* Parameters: Pointer to tty structure                                       */
-/*             Pointer to file structure                                      */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_close( PTTY tty, struct file *pFile )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-
-	if ( !pCh ) {
-		return;
-	}
-
-	ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
-
-#ifdef IP2DEBUG_OPEN
-	printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
-#endif
-
-	if ( tty_hung_up_p ( pFile ) ) {
-
-		ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
-
-		return;
-	}
-	if ( tty->count > 1 ) { /* not the last close */
-
-		ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
-
-		return;
-	}
-	pCh->flags |= ASYNC_CLOSING;	// last close actually
-
-	tty->closing = 1;
-
-	if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
-		/*
-		 * Before we drop DTR, make sure the transmitter has completely drained.
-		 * This uses an timeout, after which the close
-		 * completes.
-		 */
-		ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
-	}
-	/*
-	 * At this point we stop accepting input. Here we flush the channel
-	 * input buffer which will allow the board to send up more data. Any
-	 * additional input is tossed at interrupt/poll time.
-	 */
-	i2InputFlush( pCh );
-
-	/* disable DSS reporting */
-	i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
-				CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
-	if (tty->termios->c_cflag & HUPCL) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
-		pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
-		i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
-	}
-
-	serviceOutgoingFifo ( pCh->pMyBord );
-
-	tty_ldisc_flush(tty);
-	tty_driver_flush_buffer(tty);
-	tty->closing = 0;
-	
-	pCh->pTTY = NULL;
-
-	if (pCh->wopen) {
-		if (pCh->ClosingDelay) {
-			msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
-		}
-		wake_up_interruptible(&pCh->open_wait);
-	}
-
-	pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&pCh->close_wait);
-
-#ifdef IP2DEBUG_OPEN
-	DBG_CNT("ip2_close: after wakeups--");
-#endif
-
-
-	ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
-
-	return;
-}
-
-/******************************************************************************/
-/* Function:   ip2_hangup()                                                   */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_hangup ( PTTY tty )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-
-	if( !pCh ) {
-		return;
-	}
-
-	ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
-
-	ip2_flush_buffer(tty);
-
-	/* disable DSS reporting */
-
-	i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
-	i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
-	if ( (tty->termios->c_cflag & HUPCL) ) {
-		i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
-		pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
-		i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
-	}
-	i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, 
-				CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
-	serviceOutgoingFifo ( pCh->pMyBord );
-
-	wake_up_interruptible ( &pCh->delta_msr_wait );
-
-	pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
-	pCh->pTTY = NULL;
-	wake_up_interruptible ( &pCh->open_wait );
-
-	ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/* Device Output Section                                                      */
-/******************************************************************************/
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function:   ip2_write()                                                    */
-/* Parameters: Pointer to tty structure                                       */
-/*             Flag denoting data is in user (1) or kernel (0) space          */
-/*             Pointer to data                                                */
-/*             Number of bytes to write                                       */
-/* Returns:    Number of bytes actually written                               */
-/*                                                                            */
-/* Description: (MANDATORY)                                                   */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_write( PTTY tty, const unsigned char *pData, int count)
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-	int bytesSent = 0;
-	unsigned long flags;
-
-	ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
-
-	/* Flush out any buffered data left over from ip2_putchar() calls. */
-	ip2_flush_chars( tty );
-
-	/* This is the actual move bit. Make sure it does what we need!!!!! */
-	write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	bytesSent = i2Output( pCh, pData, count);
-	write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-
-	ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
-
-	return bytesSent > 0 ? bytesSent : 0;
-}
-
-/******************************************************************************/
-/* Function:   ip2_putchar()                                                  */
-/* Parameters: Pointer to tty structure                                       */
-/*             Character to write                                             */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_putchar( PTTY tty, unsigned char ch )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-	unsigned long flags;
-
-//	ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
-
-	write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
-	if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
-		write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-		ip2_flush_chars( tty );
-	} else
-		write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-	return 1;
-
-//	ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
-}
-
-/******************************************************************************/
-/* Function:   ip2_flush_chars()                                              */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_flush_chars( PTTY tty )
-{
-	int   strip;
-	i2ChanStrPtr  pCh = tty->driver_data;
-	unsigned long flags;
-
-	write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	if ( pCh->Pbuf_stuff ) {
-
-//		ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
-
-		//
-		// We may need to restart i2Output if it does not fullfill this request
-		//
-		strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
-		if ( strip != pCh->Pbuf_stuff ) {
-			memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
-		}
-		pCh->Pbuf_stuff -= strip;
-	}
-	write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-}
-
-/******************************************************************************/
-/* Function:   ip2_write_room()                                               */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Number of bytes that the driver can accept                     */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_write_room ( PTTY tty )
-{
-	int bytesFree;
-	i2ChanStrPtr  pCh = tty->driver_data;
-	unsigned long flags;
-
-	read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
-	read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-
-	ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
-
-	return ((bytesFree > 0) ? bytesFree : 0);
-}
-
-/******************************************************************************/
-/* Function:   ip2_chars_in_buf()                                             */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Number of bytes queued for transmission                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_chars_in_buf ( PTTY tty )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-	int rc;
-	unsigned long flags;
-
-	ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
-
-#ifdef IP2DEBUG_WRITE
-	printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
-				 pCh->Obuf_char_count + pCh->Pbuf_stuff,
-				 pCh->Obuf_char_count, pCh->Pbuf_stuff );
-#endif
-	read_lock_irqsave(&pCh->Obuf_spinlock, flags);
-	rc =  pCh->Obuf_char_count;
-	read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-	read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	rc +=  pCh->Pbuf_stuff;
-	read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-	return rc;
-}
-
-/******************************************************************************/
-/* Function:   ip2_flush_buffer()                                             */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_flush_buffer( PTTY tty )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-	unsigned long flags;
-
-	ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
-
-#ifdef IP2DEBUG_WRITE
-	printk (KERN_DEBUG "IP2: flush buffer\n" );
-#endif
-	write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
-	pCh->Pbuf_stuff = 0;
-	write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-	i2FlushOutput( pCh );
-	ip2_owake(tty);
-
-	ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
-
-}
-
-/******************************************************************************/
-/* Function:   ip2_wait_until_sent()                                          */
-/* Parameters: Pointer to tty structure                                       */
-/*             Timeout for wait.                                              */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This function is used in place of the normal tty_wait_until_sent, which    */
-/* only waits for the driver buffers to be empty (or rather, those buffers    */
-/* reported by chars_in_buffer) which doesn't work for IP2 due to the         */
-/* indeterminate number of bytes buffered on the board.                       */
-/******************************************************************************/
-static void
-ip2_wait_until_sent ( PTTY tty, int timeout )
-{
-	int i = jiffies;
-	i2ChanStrPtr  pCh = tty->driver_data;
-
-	tty_wait_until_sent(tty, timeout );
-	if ( (i = timeout - (jiffies -i)) > 0)
-		i2DrainOutput( pCh, i );
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/* Device Input Section                                                       */
-/******************************************************************************/
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function:   ip2_throttle()                                                 */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_throttle ( PTTY tty )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-
-#ifdef IP2DEBUG_READ
-	printk (KERN_DEBUG "IP2: throttle\n" );
-#endif
-	/*
-	 * Signal the poll/interrupt handlers not to forward incoming data to
-	 * the line discipline. This will cause the buffers to fill up in the
-	 * library and thus cause the library routines to send the flow control
-	 * stuff.
-	 */
-	pCh->throttled = 1;
-}
-
-/******************************************************************************/
-/* Function:   ip2_unthrottle()                                               */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_unthrottle ( PTTY tty )
-{
-	i2ChanStrPtr  pCh = tty->driver_data;
-	unsigned long flags;
-
-#ifdef IP2DEBUG_READ
-	printk (KERN_DEBUG "IP2: unthrottle\n" );
-#endif
-
-	/* Pass incoming data up to the line discipline again. */
-	pCh->throttled = 0;
- 	i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
-	serviceOutgoingFifo( pCh->pMyBord );
-	read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-	if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
-		read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-#ifdef IP2DEBUG_READ
-		printk (KERN_DEBUG "i2Input called from unthrottle\n" );
-#endif
-		i2Input( pCh );
-	} else
-		read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-}
-
-static void
-ip2_start ( PTTY tty )
-{
- 	i2ChanStrPtr  pCh = DevTable[tty->index];
-
- 	i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
- 	i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
- 	i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
-#ifdef IP2DEBUG_WRITE
-	printk (KERN_DEBUG "IP2: start tx\n" );
-#endif
-}
-
-static void
-ip2_stop ( PTTY tty )
-{
- 	i2ChanStrPtr  pCh = DevTable[tty->index];
-
- 	i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
-#ifdef IP2DEBUG_WRITE
-	printk (KERN_DEBUG "IP2: stop tx\n" );
-#endif
-}
-
-/******************************************************************************/
-/* Device Ioctl Section                                                       */
-/******************************************************************************/
-
-static int ip2_tiocmget(struct tty_struct *tty)
-{
-	i2ChanStrPtr pCh = DevTable[tty->index];
-#ifdef	ENABLE_DSSNOW
-	wait_queue_t wait;
-#endif
-
-	if (pCh == NULL)
-		return -ENODEV;
-
-/*
-	FIXME - the following code is causing a NULL pointer dereference in
-	2.3.51 in an interrupt handler.  It's suppose to prompt the board
-	to return the DSS signal status immediately.  Why doesn't it do
-	the same thing in 2.2.14?
-*/
-
-/*	This thing is still busted in the 1.2.12 driver on 2.4.x
-	and even hoses the serial console so the oops can be trapped.
-		/\/\|=mhw=|\/\/			*/
-
-#ifdef	ENABLE_DSSNOW
-	i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
-
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&pCh->dss_now_wait, &wait);
-	set_current_state( TASK_INTERRUPTIBLE );
-
-	serviceOutgoingFifo( pCh->pMyBord );
-
-	schedule();
-
-	set_current_state( TASK_RUNNING );
-	remove_wait_queue(&pCh->dss_now_wait, &wait);
-
-	if (signal_pending(current)) {
-		return -EINTR;
-	}
-#endif
-	return  ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
-	      | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
-	      | ((pCh->dataSetIn  & I2_DCD) ? TIOCM_CAR : 0)
-	      | ((pCh->dataSetIn  & I2_RI)  ? TIOCM_RNG : 0)
-	      | ((pCh->dataSetIn  & I2_DSR) ? TIOCM_DSR : 0)
-	      | ((pCh->dataSetIn  & I2_CTS) ? TIOCM_CTS : 0);
-}
-
-static int ip2_tiocmset(struct tty_struct *tty,
-			unsigned int set, unsigned int clear)
-{
-	i2ChanStrPtr pCh = DevTable[tty->index];
-
-	if (pCh == NULL)
-		return -ENODEV;
-
-	if (set & TIOCM_RTS) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
-		pCh->dataSetOut |= I2_RTS;
-	}
-	if (set & TIOCM_DTR) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
-		pCh->dataSetOut |= I2_DTR;
-	}
-
-	if (clear & TIOCM_RTS) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
-		pCh->dataSetOut &= ~I2_RTS;
-	}
-	if (clear & TIOCM_DTR) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
-		pCh->dataSetOut &= ~I2_DTR;
-	}
-	serviceOutgoingFifo( pCh->pMyBord );
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   ip2_ioctl()                                                    */
-/* Parameters: Pointer to tty structure                                       */
-/*             Pointer to file structure                                      */
-/*             Command                                                        */
-/*             Argument                                                       */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg )
-{
-	wait_queue_t wait;
-	i2ChanStrPtr pCh = DevTable[tty->index];
-	i2eBordStrPtr pB;
-	struct async_icount cprev, cnow;	/* kernel counter temps */
-	int rc = 0;
-	unsigned long flags;
-	void __user *argp = (void __user *)arg;
-
-	if ( pCh == NULL )
-		return -ENODEV;
-
-	pB = pCh->pMyBord;
-
-	ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
-
-#ifdef IP2DEBUG_IOCTL
-	printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
-#endif
-
-	switch(cmd) {
-	case TIOCGSERIAL:
-
-		ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
-
-		rc = get_serial_info(pCh, argp);
-		if (rc)
-			return rc;
-		break;
-
-	case TIOCSSERIAL:
-
-		ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
-
-		rc = set_serial_info(pCh, argp);
-		if (rc)
-			return rc;
-		break;
-
-	case TCXONC:
-		rc = tty_check_change(tty);
-		if (rc)
-			return rc;
-		switch (arg) {
-		case TCOOFF:
-			//return  -ENOIOCTLCMD;
-			break;
-		case TCOON:
-			//return  -ENOIOCTLCMD;
-			break;
-		case TCIOFF:
-			if (STOP_CHAR(tty) != __DISABLED_CHAR) {
-				i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
-						CMD_XMIT_NOW(STOP_CHAR(tty)));
-			}
-			break;
-		case TCION:
-			if (START_CHAR(tty) != __DISABLED_CHAR) {
-				i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
-						CMD_XMIT_NOW(START_CHAR(tty)));
-			}
-			break;
-		default:
-			return -EINVAL;
-		}
-		return 0;
-
-	case TCSBRK:   /* SVID version: non-zero arg --> no break */
-		rc = tty_check_change(tty);
-
-		ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
-
-		if (!rc) {
-			ip2_wait_until_sent(tty,0);
-			if (!arg) {
-				i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
-				serviceOutgoingFifo( pCh->pMyBord );
-			}
-		}
-		break;
-
-	case TCSBRKP:  /* support for POSIX tcsendbreak() */
-		rc = tty_check_change(tty);
-
-		ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
-
-		if (!rc) {
-			ip2_wait_until_sent(tty,0);
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
-				CMD_SEND_BRK(arg ? arg*100 : 250));
-			serviceOutgoingFifo ( pCh->pMyBord );	
-		}
-		break;
-
-	case TIOCGSOFTCAR:
-
-		ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
-
-			rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
-		if (rc)	
-			return rc;
-	break;
-
-	case TIOCSSOFTCAR:
-
-		ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
-
-		rc = get_user(arg,(unsigned long __user *) argp);
-		if (rc) 
-			return rc;
-		tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
-					 | (arg ? CLOCAL : 0));
-		
-		break;
-
-	/*
-	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
-	 * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
-	 * for masking). Caller should use TIOCGICOUNT to see which one it was
-	 */
-	case TIOCMIWAIT:
-		write_lock_irqsave(&pB->read_fifo_spinlock, flags);
-		cprev = pCh->icount;	 /* note the counters on entry */
-		write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-		i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, 
-						CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
-		init_waitqueue_entry(&wait, current);
-		add_wait_queue(&pCh->delta_msr_wait, &wait);
-		set_current_state( TASK_INTERRUPTIBLE );
-
-		serviceOutgoingFifo( pCh->pMyBord );
-		for(;;) {
-			ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
-
-			schedule();
-
-			ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
-
-			/* see if a signal did it */
-			if (signal_pending(current)) {
-				rc = -ERESTARTSYS;
-				break;
-			}
-			write_lock_irqsave(&pB->read_fifo_spinlock, flags);
-			cnow = pCh->icount; /* atomic copy */
-			write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-				cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
-				rc =  -EIO; /* no change => rc */
-				break;
-			}
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-				rc =  0;
-				break;
-			}
-			cprev = cnow;
-		}
-		set_current_state( TASK_RUNNING );
-		remove_wait_queue(&pCh->delta_msr_wait, &wait);
-
-		i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, 
-						 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
-		if ( ! (pCh->flags	& ASYNC_CHECK_CD)) {
-			i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
-		}
-		serviceOutgoingFifo( pCh->pMyBord );
-		return rc;
-		break;
-
-	/*
-	 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
-	 * will be passed to the line discipline for it to handle.
-	 */
-	case TIOCSERCONFIG:
-	case TIOCSERGWILD:
-	case TIOCSERGETLSR:
-	case TIOCSERSWILD:
-	case TIOCSERGSTRUCT:
-	case TIOCSERGETMULTI:
-	case TIOCSERSETMULTI:
-
-	default:
-		ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
-
-		rc =  -ENOIOCTLCMD;
-		break;
-	}
-
-	ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
-
-	return rc;
-}
-
-static int ip2_get_icount(struct tty_struct *tty,
-		struct serial_icounter_struct *icount)
-{
-	i2ChanStrPtr pCh = DevTable[tty->index];
-	i2eBordStrPtr pB;
-	struct async_icount cnow;	/* kernel counter temp */
-	unsigned long flags;
-
-	if ( pCh == NULL )
-		return -ENODEV;
-
-	pB = pCh->pMyBord;
-
-	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for RI where
-	 * only 0->1 is counted. The controller is quite capable of counting
-	 * both, but this done to preserve compatibility with the standard
-	 * serial driver.
-	 */
-
-	write_lock_irqsave(&pB->read_fifo_spinlock, flags);
-	cnow = pCh->icount;
-	write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   GetSerialInfo()                                                */
-/* Parameters: Pointer to channel structure                                   */
-/*             Pointer to old termios structure                               */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This is to support the setserial command, and requires processing of the   */
-/* standard Linux serial structure.                                           */
-/******************************************************************************/
-static int
-get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
-{
-	struct serial_struct tmp;
-
-	memset ( &tmp, 0, sizeof(tmp) );
-	tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
-	if (BID_HAS_654(tmp.type)) {
-		tmp.type = PORT_16650;
-	} else {
-		tmp.type = PORT_CIRRUS;
-	}
-	tmp.line = pCh->port_index;
-	tmp.port = pCh->pMyBord->i2eBase;
-	tmp.irq  = ip2config.irq[pCh->port_index/64];
-	tmp.flags = pCh->flags;
-	tmp.baud_base = pCh->BaudBase;
-	tmp.close_delay = pCh->ClosingDelay;
-	tmp.closing_wait = pCh->ClosingWaitTime;
-	tmp.custom_divisor = pCh->BaudDivisor;
-   	return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
-}
-
-/******************************************************************************/
-/* Function:   SetSerialInfo()                                                */
-/* Parameters: Pointer to channel structure                                   */
-/*             Pointer to old termios structure                               */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This function provides support for setserial, which uses the TIOCSSERIAL   */
-/* ioctl. Not all setserial parameters are relevant. If the user attempts to  */
-/* change the IRQ, address or type of the port the ioctl fails.               */
-/******************************************************************************/
-static int
-set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
-{
-	struct serial_struct ns;
-	int   old_flags, old_baud_divisor;
-
-	if (copy_from_user(&ns, new_info, sizeof (ns)))
-		return -EFAULT;
-
-	/*
-	 * We don't allow setserial to change IRQ, board address, type or baud
-	 * base. Also line nunber as such is meaningless but we use it for our
-	 * array index so it is fixed also.
-	 */
-	if ( (ns.irq  	    != ip2config.irq[pCh->port_index])
-	    || ((int) ns.port      != ((int) (pCh->pMyBord->i2eBase)))
-	    || (ns.baud_base != pCh->BaudBase)
-	    || (ns.line      != pCh->port_index) ) {
-		return -EINVAL;
-	}
-
-	old_flags = pCh->flags;
-	old_baud_divisor = pCh->BaudDivisor;
-
-	if ( !capable(CAP_SYS_ADMIN) ) {
-		if ( ( ns.close_delay != pCh->ClosingDelay ) ||
-		    ( (ns.flags & ~ASYNC_USR_MASK) !=
-		      (pCh->flags & ~ASYNC_USR_MASK) ) ) {
-			return -EPERM;
-		}
-
-		pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
-			       (ns.flags & ASYNC_USR_MASK);
-		pCh->BaudDivisor = ns.custom_divisor;
-	} else {
-		pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
-			       (ns.flags & ASYNC_FLAGS);
-		pCh->BaudDivisor = ns.custom_divisor;
-		pCh->ClosingDelay = ns.close_delay * HZ/100;
-		pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
-	}
-
-	if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
-	    || (old_baud_divisor != pCh->BaudDivisor) ) {
-		// Invalidate speed and reset parameters
-		set_params( pCh, NULL );
-	}
-
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   ip2_set_termios()                                              */
-/* Parameters: Pointer to tty structure                                       */
-/*             Pointer to old termios structure                               */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_set_termios( PTTY tty, struct ktermios *old_termios )
-{
-	i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
-
-#ifdef IP2DEBUG_IOCTL
-	printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
-#endif
-
-	set_params( pCh, old_termios );
-}
-
-/******************************************************************************/
-/* Function:   ip2_set_line_discipline()                                      */
-/* Parameters: Pointer to tty structure                                       */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:  Does nothing                                                 */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static void
-ip2_set_line_discipline ( PTTY tty )
-{
-#ifdef IP2DEBUG_IOCTL
-	printk (KERN_DEBUG "IP2: set line discipline\n" );
-#endif
-
-	ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
-
-}
-
-/******************************************************************************/
-/* Function:   SetLine Characteristics()                                      */
-/* Parameters: Pointer to channel structure                                   */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/* This routine is called to update the channel structure with the new line   */
-/* characteristics, and send the appropriate commands to the board when they  */
-/* change.                                                                    */
-/******************************************************************************/
-static void
-set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
-{
-	tcflag_t cflag, iflag, lflag;
-	char stop_char, start_char;
-	struct ktermios dummy;
-
-	lflag = pCh->pTTY->termios->c_lflag;
-	cflag = pCh->pTTY->termios->c_cflag;
-	iflag = pCh->pTTY->termios->c_iflag;
-
-	if (o_tios == NULL) {
-		dummy.c_lflag = ~lflag;
-		dummy.c_cflag = ~cflag;
-		dummy.c_iflag = ~iflag;
-		o_tios = &dummy;
-	}
-
-	{
-		switch ( cflag & CBAUD ) {
-		case B0:
-			i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
-			pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
-			i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
-			pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
-			goto service_it;
-			break;
-		case B38400:
-			/*
-			 * This is the speed that is overloaded with all the other high
-			 * speeds, depending upon the flag settings.
-			 */
-			if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
-				pCh->speed = CBR_57600;
-			} else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
-				pCh->speed = CBR_115200;
-			} else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
-				pCh->speed = CBR_C1;
-			} else {
-				pCh->speed = CBR_38400;
-			}
-			break;
-		case B50:      pCh->speed = CBR_50;      break;
-		case B75:      pCh->speed = CBR_75;      break;
-		case B110:     pCh->speed = CBR_110;     break;
-		case B134:     pCh->speed = CBR_134;     break;
-		case B150:     pCh->speed = CBR_150;     break;
-		case B200:     pCh->speed = CBR_200;     break;
-		case B300:     pCh->speed = CBR_300;     break;
-		case B600:     pCh->speed = CBR_600;     break;
-		case B1200:    pCh->speed = CBR_1200;    break;
-		case B1800:    pCh->speed = CBR_1800;    break;
-		case B2400:    pCh->speed = CBR_2400;    break;
-		case B4800:    pCh->speed = CBR_4800;    break;
-		case B9600:    pCh->speed = CBR_9600;    break;
-		case B19200:   pCh->speed = CBR_19200;   break;
-		case B57600:   pCh->speed = CBR_57600;   break;
-		case B115200:  pCh->speed = CBR_115200;  break;
-		case B153600:  pCh->speed = CBR_153600;  break;
-		case B230400:  pCh->speed = CBR_230400;  break;
-		case B307200:  pCh->speed = CBR_307200;  break;
-		case B460800:  pCh->speed = CBR_460800;  break;
-		case B921600:  pCh->speed = CBR_921600;  break;
-		default:       pCh->speed = CBR_9600;    break;
-		}
-		if ( pCh->speed == CBR_C1 ) {
-			// Process the custom speed parameters.
-			int bps = pCh->BaudBase / pCh->BaudDivisor;
-			if ( bps == 921600 ) {
-				pCh->speed = CBR_921600;
-			} else {
-				bps = bps/10;
-				i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
-			}
-		}
-		i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
-		
-		i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
-		pCh->dataSetOut |= (I2_DTR | I2_RTS);
-	}
-	if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) 
-	{
-		i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, 
-			CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
-	}
-	if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) 
-	{
-		i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
-			CMD_SETPAR( 
-				(cflag & PARENB ?  (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
-			)
-		);
-	}
-	/* byte size and parity */
-	if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) 
-	{
-		int datasize;
-		switch ( cflag & CSIZE ) {
-		case CS5: datasize = CSZ_5; break;
-		case CS6: datasize = CSZ_6; break;
-		case CS7: datasize = CSZ_7; break;
-		case CS8: datasize = CSZ_8; break;
-		default:  datasize = CSZ_5; break;	/* as per serial.c */
-		}
-		i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
-	}
-	/* Process CTS flow control flag setting */
-	if ( (cflag & CRTSCTS) ) {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100,
-						2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
-	} else {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100,
-						2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
-	}
-	//
-	// Process XON/XOFF flow control flags settings
-	//
-	stop_char = STOP_CHAR(pCh->pTTY);
-	start_char = START_CHAR(pCh->pTTY);
-
-	//////////// can't be \000
-	if (stop_char == __DISABLED_CHAR ) 
-	{
-		stop_char = ~__DISABLED_CHAR; 
-	}
-	if (start_char == __DISABLED_CHAR ) 
-	{
-		start_char = ~__DISABLED_CHAR;
-	}
-	/////////////////////////////////
-
-	if ( o_tios->c_cc[VSTART] != start_char ) 
-	{
-		i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
-	}
-	if ( o_tios->c_cc[VSTOP] != stop_char ) 
-	{
-		 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
-		 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
-	}
-	if (stop_char == __DISABLED_CHAR ) 
-	{
-		stop_char = ~__DISABLED_CHAR;  //TEST123
-		goto no_xoff;
-	}
-	if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) 
-	{
-		if ( iflag & IXOFF ) {	// Enable XOFF output flow control
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
-		} else {	// Disable XOFF output flow control
-no_xoff:
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
-		}
-	}
-	if (start_char == __DISABLED_CHAR ) 
-	{
-		goto no_xon;
-	}
-	if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) 
-	{
-		if ( iflag & IXON ) {
-			if ( iflag & IXANY ) { // Enable XON/XANY output flow control
-				i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
-			} else { // Enable XON output flow control
-				i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
-			}
-		} else { // Disable XON output flow control
-no_xon:
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
-		}
-	}
-	if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) 
-	{
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, 
-				CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
-	}
-	if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) 
-	{
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, 
-				CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
-	}
-
-	if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) 
-			^	( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) 
-	{
-		char brkrpt = 0;
-		char parrpt = 0;
-
-		if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
-			/* Ignore breaks altogether */
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
-		} else {
-			if ( iflag & BRKINT ) {
-				if ( iflag & PARMRK ) {
-					brkrpt = 0x0a;	// exception an inline triple
-				} else {
-					brkrpt = 0x1a;	// exception and NULL
-				}
-				brkrpt |= 0x04;	// flush input
-			} else {
-				if ( iflag & PARMRK ) {
-					brkrpt = 0x0b;	//POSIX triple \0377 \0 \0
-				} else {
-					brkrpt = 0x01;	// Null only
-				}
-			}
-			i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
-		} 
-
-		if (iflag & IGNPAR) {
-			parrpt = 0x20;
-													/* would be 2 for not cirrus bug */
-													/* would be 0x20 cept for cirrus bug */
-		} else {
-			if ( iflag & PARMRK ) {
-				/*
-				 * Replace error characters with 3-byte sequence (\0377,\0,char)
-				 */
-				parrpt = 0x04 ;
-				i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
-			} else {
-				parrpt = 0x03;
-			} 
-		}
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
-	}
-	if (cflag & CLOCAL) {
-		// Status reporting fails for DCD if this is off
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
-		pCh->flags &= ~ASYNC_CHECK_CD;
-	} else {
-		i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
-		pCh->flags	|= ASYNC_CHECK_CD;
-	}
-
-service_it:
-	i2DrainOutput( pCh, 100 );		
-}
-
-/******************************************************************************/
-/* IPL Device Section                                                         */
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function:   ip2_ipl_read()                                                  */
-/* Parameters: Pointer to device inode                                        */
-/*             Pointer to file structure                                      */
-/*             Pointer to data                                                */
-/*             Number of bytes to read                                        */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:   Ugly                                                        */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-
-static 
-ssize_t
-ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
-{
-	unsigned int minor = iminor(pFile->f_path.dentry->d_inode);
-	int rc = 0;
-
-#ifdef IP2DEBUG_IPL
-	printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
-#endif
-
-	switch( minor ) {
-	case 0:	    // IPL device
-		rc = -EINVAL;
-		break;
-	case 1:	    // Status dump
-		rc = -EINVAL;
-		break;
-	case 2:	    // Ping device
-		rc = -EINVAL;
-		break;
-	case 3:	    // Trace device
-		rc = DumpTraceBuffer ( pData, count );
-		break;
-	case 4:	    // Trace device
-		rc = DumpFifoBuffer ( pData, count );
-		break;
-	default:
-		rc = -ENODEV;
-		break;
-	}
-	return rc;
-}
-
-static int
-DumpFifoBuffer ( char __user *pData, int count )
-{
-#ifdef DEBUG_FIFO
-	int rc;
-	rc = copy_to_user(pData, DBGBuf, count);
-
-	printk(KERN_DEBUG "Last index %d\n", I );
-
-	return count;
-#endif	/* DEBUG_FIFO */
-	return 0;
-}
-
-static int
-DumpTraceBuffer ( char __user *pData, int count )
-{
-#ifdef IP2DEBUG_TRACE
-	int rc;
-	int dumpcount;
-	int chunk;
-	int *pIndex = (int __user *)pData;
-
-	if ( count < (sizeof(int) * 6) ) {
-		return -EIO;
-	}
-	rc = put_user(tracewrap, pIndex );
-	rc = put_user(TRACEMAX, ++pIndex );
-	rc = put_user(tracestrip, ++pIndex );
-	rc = put_user(tracestuff, ++pIndex );
-	pData += sizeof(int) * 6;
-	count -= sizeof(int) * 6;
-
-	dumpcount = tracestuff - tracestrip;
-	if ( dumpcount < 0 ) {
-		dumpcount += TRACEMAX;
-	}
-	if ( dumpcount > count ) {
-		dumpcount = count;
-	}
-	chunk = TRACEMAX - tracestrip;
-	if ( dumpcount > chunk ) {
-		rc = copy_to_user(pData, &tracebuf[tracestrip],
-			      chunk * sizeof(tracebuf[0]) );
-		pData += chunk * sizeof(tracebuf[0]);
-		tracestrip = 0;
-		chunk = dumpcount - chunk;
-	} else {
-		chunk = dumpcount;
-	}
-	rc = copy_to_user(pData, &tracebuf[tracestrip],
-		      chunk * sizeof(tracebuf[0]) );
-	tracestrip += chunk;
-	tracewrap = 0;
-
-	rc = put_user(tracestrip, ++pIndex );
-	rc = put_user(tracestuff, ++pIndex );
-
-	return dumpcount;
-#else
-	return 0;
-#endif
-}
-
-/******************************************************************************/
-/* Function:   ip2_ipl_write()                                                 */
-/* Parameters:                                                                */
-/*             Pointer to file structure                                      */
-/*             Pointer to data                                                */
-/*             Number of bytes to write                                       */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static ssize_t
-ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
-{
-#ifdef IP2DEBUG_IPL
-	printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
-#endif
-	return 0;
-}
-
-/******************************************************************************/
-/* Function:   ip2_ipl_ioctl()                                                */
-/* Parameters: Pointer to device inode                                        */
-/*             Pointer to file structure                                      */
-/*             Command                                                        */
-/*             Argument                                                       */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static long
-ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
-{
-	unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode);
-	int rc = 0;
-	void __user *argp = (void __user *)arg;
-	ULONG __user *pIndex = argp;
-	i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
-	i2ChanStrPtr pCh;
-
-#ifdef IP2DEBUG_IPL
-	printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
-#endif
-
-	mutex_lock(&ip2_mutex);
-
-	switch ( iplminor ) {
-	case 0:	    // IPL device
-		rc = -EINVAL;
-		break;
-	case 1:	    // Status dump
-	case 5:
-	case 9:
-	case 13:
-		switch ( cmd ) {
-		case 64:	/* Driver - ip2stat */
-			rc = put_user(-1, pIndex++ );
-			rc = put_user(irq_counter, pIndex++  );
-			rc = put_user(bh_counter, pIndex++  );
-			break;
-
-		case 65:	/* Board  - ip2stat */
-			if ( pB ) {
-				rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
-				rc = put_user(inb(pB->i2eStatus),
-					(ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
-			} else {
-				rc = -ENODEV;
-			}
-			break;
-
-		default:
-			if (cmd < IP2_MAX_PORTS) {
-				pCh = DevTable[cmd];
-				if ( pCh )
-				{
-					rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
-					if (rc)
-						rc = -EFAULT;
-				} else {
-					rc = -ENODEV;
-				}
-			} else {
-				rc = -EINVAL;
-			}
-		}
-		break;
-
-	case 2:	    // Ping device
-		rc = -EINVAL;
-		break;
-	case 3:	    // Trace device
-		/*
-		 * akpm: This used to write a whole bunch of function addresses
-		 * to userspace, which generated lots of put_user() warnings.
-		 * I killed it all.  Just return "success" and don't do
-		 * anything.
-		 */
-		if (cmd == 1)
-			rc = 0;
-		else
-			rc = -EINVAL;
-		break;
-
-	default:
-		rc = -ENODEV;
-		break;
-	}
-	mutex_unlock(&ip2_mutex);
-	return rc;
-}
-
-/******************************************************************************/
-/* Function:   ip2_ipl_open()                                                 */
-/* Parameters: Pointer to device inode                                        */
-/*             Pointer to file structure                                      */
-/* Returns:    Success or failure                                             */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-static int
-ip2_ipl_open( struct inode *pInode, struct file *pFile )
-{
-
-#ifdef IP2DEBUG_IPL
-	printk (KERN_DEBUG "IP2IPL: open\n" );
-#endif
-	return 0;
-}
-
-static int
-proc_ip2mem_show(struct seq_file *m, void *v)
-{
-	i2eBordStrPtr  pB;
-	i2ChanStrPtr  pCh;
-	PTTY tty;
-	int i;
-
-#define FMTLINE	"%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
-#define FMTLIN2	"     0x%04x 0x%04x tx flow 0x%x\n"
-#define FMTLIN3	"     0x%04x 0x%04x rc flow\n"
-
-	seq_printf(m,"\n");
-
-	for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
-		pB = i2BoardPtrTable[i];
-		if ( pB ) {
-			seq_printf(m,"board %d:\n",i);
-			seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n",
-				pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
-		}
-	}
-
-	seq_printf(m,"#: tty flags, port flags,     cflags,     iflags\n");
-	for (i=0; i < IP2_MAX_PORTS; i++) {
-		pCh = DevTable[i];
-		if (pCh) {
-			tty = pCh->pTTY;
-			if (tty && tty->count) {
-				seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags,
-									tty->termios->c_cflag,tty->termios->c_iflag);
-
-				seq_printf(m,FMTLIN2,
-						pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
-				seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room);
-			}
-		}
-	}
-	return 0;
-}
-
-static int proc_ip2mem_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, proc_ip2mem_show, NULL);
-}
-
-static const struct file_operations ip2mem_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= proc_ip2mem_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * This is the handler for /proc/tty/driver/ip2
- *
- * This stretch of code has been largely plagerized from at least three
- * different sources including ip2mkdev.c and a couple of other drivers.
- * The bugs are all mine.  :-)	=mhw=
- */
-static int ip2_proc_show(struct seq_file *m, void *v)
-{
-	int	i, j, box;
-	int	boxes = 0;
-	int	ports = 0;
-	int	tports = 0;
-	i2eBordStrPtr  pB;
-	char *sep;
-
-	seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion);
-	seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
-			IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
-			IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
-
-	for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
-		/* This need to be reset for a board by board count... */
-		boxes = 0;
-		pB = i2BoardPtrTable[i];
-		if( pB ) {
-			switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) 
-			{
-			case POR_ID_FIIEX:
-				seq_printf(m, "Board %d: EX ports=", i);
-				sep = "";
-				for( box = 0; box < ABS_MAX_BOXES; ++box )
-				{
-					ports = 0;
-
-					if( pB->i2eChannelMap[box] != 0 ) ++boxes;
-					for( j = 0; j < ABS_BIGGEST_BOX; ++j ) 
-					{
-						if( pB->i2eChannelMap[box] & 1<< j ) {
-							++ports;
-						}
-					}
-					seq_printf(m, "%s%d", sep, ports);
-					sep = ",";
-					tports += ports;
-				}
-				seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8);
-				break;
-
-			case POR_ID_II_4:
-				seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i);
-				tports = ports = 4;
-				break;
-
-			case POR_ID_II_8:
-				seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i);
-				tports = ports = 8;
-				break;
-
-			case POR_ID_II_8R:
-				seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i);
-				tports = ports = 8;
-				break;
-
-			default:
-				seq_printf(m, "Board %d: unknown", i);
-				/* Don't try and probe for minor numbers */
-				tports = ports = 0;
-			}
-
-		} else {
-			/* Don't try and probe for minor numbers */
-			seq_printf(m, "Board %d: vacant", i);
-			tports = ports = 0;
-		}
-
-		if( tports ) {
-			seq_puts(m, " minors=");
-			sep = "";
-			for ( box = 0; box < ABS_MAX_BOXES; ++box )
-			{
-				for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
-				{
-					if ( pB->i2eChannelMap[box] & (1 << j) )
-					{
-						seq_printf(m, "%s%d", sep,
-							j + ABS_BIGGEST_BOX *
-							(box+i*ABS_MAX_BOXES));
-						sep = ",";
-					}
-				}
-			}
-		}
-		seq_putc(m, '\n');
-	}
-	return 0;
- }
-
-static int ip2_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ip2_proc_show, NULL);
-}
-
-static const struct file_operations ip2_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ip2_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
- 
-/******************************************************************************/
-/* Function:   ip2trace()                                                     */
-/* Parameters: Value to add to trace buffer                                   */
-/* Returns:    Nothing                                                        */
-/*                                                                            */
-/* Description:                                                               */
-/*                                                                            */
-/*                                                                            */
-/******************************************************************************/
-#ifdef IP2DEBUG_TRACE
-void
-ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
-{
-	long flags;
-	unsigned long *pCode = &codes;
-	union ip2breadcrumb bc;
-	i2ChanStrPtr  pCh;
-
-
-	tracebuf[tracestuff++] = jiffies;
-	if ( tracestuff == TRACEMAX ) {
-		tracestuff = 0;
-	}
-	if ( tracestuff == tracestrip ) {
-		if ( ++tracestrip == TRACEMAX ) {
-			tracestrip = 0;
-		}
-		++tracewrap;
-	}
-
-	bc.hdr.port  = 0xff & pn;
-	bc.hdr.cat   = cat;
-	bc.hdr.codes = (unsigned char)( codes & 0xff );
-	bc.hdr.label = label;
-	tracebuf[tracestuff++] = bc.value;
-
-	for (;;) {
-		if ( tracestuff == TRACEMAX ) {
-			tracestuff = 0;
-		}
-		if ( tracestuff == tracestrip ) {
-			if ( ++tracestrip == TRACEMAX ) {
-				tracestrip = 0;
-			}
-			++tracewrap;
-		}
-
-		if ( !codes-- )
-			break;
-
-		tracebuf[tracestuff++] = *++pCode;
-	}
-}
-#endif
-
-
-MODULE_LICENSE("GPL");
-
-static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
-
-MODULE_FIRMWARE("intelliport2.bin");
diff --git a/drivers/char/ip2/ip2trace.h b/drivers/char/ip2/ip2trace.h
deleted file mode 100644
index da20435..0000000
--- a/drivers/char/ip2/ip2trace.h
+++ /dev/null
@@ -1,42 +0,0 @@
-
-//
-union ip2breadcrumb 
-{
-	struct { 
-		unsigned char port, cat, codes, label;
-	} __attribute__ ((packed)) hdr;
-	unsigned long value;
-};
-
-#define ITRC_NO_PORT 	0xFF
-#define CHANN	(pCh->port_index)
-
-#define	ITRC_ERROR	'!'
-#define	ITRC_INIT 	'A'
-#define	ITRC_OPEN	'B'
-#define	ITRC_CLOSE	'C'
-#define	ITRC_DRAIN	'D'
-#define	ITRC_IOCTL	'E'
-#define	ITRC_FLUSH	'F'
-#define	ITRC_STATUS	'G'
-#define	ITRC_HANGUP	'H'
-#define	ITRC_INTR 	'I'
-#define	ITRC_SFLOW	'J'
-#define	ITRC_SBCMD	'K'
-#define	ITRC_SICMD	'L'
-#define	ITRC_MODEM	'M'
-#define	ITRC_INPUT	'N'
-#define	ITRC_OUTPUT	'O'
-#define	ITRC_PUTC	'P'
-#define	ITRC_QUEUE	'Q'
-#define	ITRC_STFLW	'R'
-#define	ITRC_SFIFO	'S'
-#define	ITRC_VERIFY	'V'
-#define	ITRC_WRITE	'W'
-
-#define	ITRC_ENTER	0x00
-#define	ITRC_RETURN	0xFF
-
-#define	ITRC_QUEUE_ROOM	2
-#define	ITRC_QUEUE_CMD	6
-
diff --git a/drivers/char/ip2/ip2types.h b/drivers/char/ip2/ip2types.h
deleted file mode 100644
index 9d67b26..0000000
--- a/drivers/char/ip2/ip2types.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Driver constants and type definitions.
-*
-*   NOTES:
-*
-*******************************************************************************/
-#ifndef IP2TYPES_H
-#define IP2TYPES_H
-
-//*************
-//* Constants *
-//*************
-
-// Define some limits for this driver. Ports per board is a hardware limitation
-// that will not change. Current hardware limits this to 64 ports per board.
-// Boards per driver is a self-imposed limit.
-//
-#define IP2_MAX_BOARDS        4
-#define IP2_PORTS_PER_BOARD   ABS_MOST_PORTS
-#define IP2_MAX_PORTS         (IP2_MAX_BOARDS*IP2_PORTS_PER_BOARD)
-
-#define ISA    0
-#define PCI    1
-#define EISA   2
-
-//********************
-//* Type Definitions *
-//********************
-
-typedef struct tty_struct *   PTTY;
-typedef wait_queue_head_t   PWAITQ;
-
-typedef unsigned char         UCHAR;
-typedef unsigned int          UINT;
-typedef unsigned short        USHORT;
-typedef unsigned long         ULONG;
-
-typedef struct 
-{
-	short irq[IP2_MAX_BOARDS]; 
-	unsigned short addr[IP2_MAX_BOARDS];
-	int type[IP2_MAX_BOARDS];
-#ifdef CONFIG_PCI
-	struct pci_dev *pci_dev[IP2_MAX_BOARDS];
-#endif
-} ip2config_t;
-
-#endif
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
deleted file mode 100644
index 0b26627..0000000
--- a/drivers/char/istallion.c
+++ /dev/null
@@ -1,4507 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	istallion.c  -- stallion intelligent multiport serial driver.
- *
- *	Copyright (C) 1996-1999  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This code is loosely based on the Linux serial driver, written by
- *	Linus Torvalds, Theodore T'so and others.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/seq_file.h>
-#include <linux/cdk.h>
-#include <linux/comstats.h>
-#include <linux/istallion.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/eisa.h>
-#include <linux/ctype.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/pci.h>
-
-/*****************************************************************************/
-
-/*
- *	Define different board types. Not all of the following board types
- *	are supported by this driver. But I will use the standard "assigned"
- *	board numbers. Currently supported boards are abbreviated as:
- *	ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and
- *	STAL = Stallion.
- */
-#define	BRD_UNKNOWN	0
-#define	BRD_STALLION	1
-#define	BRD_BRUMBY4	2
-#define	BRD_ONBOARD2	3
-#define	BRD_ONBOARD	4
-#define	BRD_ONBOARDE	7
-#define	BRD_ECP		23
-#define BRD_ECPE	24
-#define	BRD_ECPMC	25
-#define	BRD_ECPPCI	29
-
-#define	BRD_BRUMBY	BRD_BRUMBY4
-
-/*
- *	Define a configuration structure to hold the board configuration.
- *	Need to set this up in the code (for now) with the boards that are
- *	to be configured into the system. This is what needs to be modified
- *	when adding/removing/modifying boards. Each line entry in the
- *	stli_brdconf[] array is a board. Each line contains io/irq/memory
- *	ranges for that board (as well as what type of board it is).
- *	Some examples:
- *		{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },
- *	This line will configure an EasyConnection 8/64 at io address 2a0,
- *	and shared memory address of cc000. Multiple EasyConnection 8/64
- *	boards can share the same shared memory address space. No interrupt
- *	is required for this board type.
- *	Another example:
- *		{ BRD_ECPE, 0x5000, 0, 0x80000000, 0, 0 },
- *	This line will configure an EasyConnection 8/64 EISA in slot 5 and
- *	shared memory address of 0x80000000 (2 GByte). Multiple
- *	EasyConnection 8/64 EISA boards can share the same shared memory
- *	address space. No interrupt is required for this board type.
- *	Another example:
- *		{ BRD_ONBOARD, 0x240, 0, 0xd0000, 0, 0 },
- *	This line will configure an ONboard (ISA type) at io address 240,
- *	and shared memory address of d0000. Multiple ONboards can share
- *	the same shared memory address space. No interrupt required.
- *	Another example:
- *		{ BRD_BRUMBY4, 0x360, 0, 0xc8000, 0, 0 },
- *	This line will configure a Brumby board (any number of ports!) at
- *	io address 360 and shared memory address of c8000. All Brumby boards
- *	configured into a system must have their own separate io and memory
- *	addresses. No interrupt is required.
- *	Another example:
- *		{ BRD_STALLION, 0x330, 0, 0xd0000, 0, 0 },
- *	This line will configure an original Stallion board at io address 330
- *	and shared memory address d0000 (this would only be valid for a "V4.0"
- *	or Rev.O Stallion board). All Stallion boards configured into the
- *	system must have their own separate io and memory addresses. No
- *	interrupt is required.
- */
-
-struct stlconf {
-	int		brdtype;
-	int		ioaddr1;
-	int		ioaddr2;
-	unsigned long	memaddr;
-	int		irq;
-	int		irqtype;
-};
-
-static unsigned int stli_nrbrds;
-
-/* stli_lock must NOT be taken holding brd_lock */
-static spinlock_t stli_lock;	/* TTY logic lock */
-static spinlock_t brd_lock;	/* Board logic lock */
-
-/*
- *	There is some experimental EISA board detection code in this driver.
- *	By default it is disabled, but for those that want to try it out,
- *	then set the define below to be 1.
- */
-#define	STLI_EISAPROBE	0
-
-/*****************************************************************************/
-
-/*
- *	Define some important driver characteristics. Device major numbers
- *	allocated as per Linux Device Registry.
- */
-#ifndef	STL_SIOMEMMAJOR
-#define	STL_SIOMEMMAJOR		28
-#endif
-#ifndef	STL_SERIALMAJOR
-#define	STL_SERIALMAJOR		24
-#endif
-#ifndef	STL_CALLOUTMAJOR
-#define	STL_CALLOUTMAJOR	25
-#endif
-
-/*****************************************************************************/
-
-/*
- *	Define our local driver identity first. Set up stuff to deal with
- *	all the local structures required by a serial tty driver.
- */
-static char	*stli_drvtitle = "Stallion Intelligent Multiport Serial Driver";
-static char	*stli_drvname = "istallion";
-static char	*stli_drvversion = "5.6.0";
-static char	*stli_serialname = "ttyE";
-
-static struct tty_driver	*stli_serial;
-static const struct tty_port_operations stli_port_ops;
-
-#define	STLI_TXBUFSIZE		4096
-
-/*
- *	Use a fast local buffer for cooked characters. Typically a whole
- *	bunch of cooked characters come in for a port, 1 at a time. So we
- *	save those up into a local buffer, then write out the whole lot
- *	with a large memcpy. Just use 1 buffer for all ports, since its
- *	use it is only need for short periods of time by each port.
- */
-static char			*stli_txcookbuf;
-static int			stli_txcooksize;
-static int			stli_txcookrealsize;
-static struct tty_struct	*stli_txcooktty;
-
-/*
- *	Define a local default termios struct. All ports will be created
- *	with this termios initially. Basically all it defines is a raw port
- *	at 9600 baud, 8 data bits, no parity, 1 stop bit.
- */
-static struct ktermios		stli_deftermios = {
-	.c_cflag	= (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
-	.c_cc		= INIT_C_CC,
-	.c_ispeed	= 9600,
-	.c_ospeed	= 9600,
-};
-
-/*
- *	Define global stats structures. Not used often, and can be
- *	re-used for each stats call.
- */
-static comstats_t	stli_comstats;
-static combrd_t		stli_brdstats;
-static struct asystats	stli_cdkstats;
-
-/*****************************************************************************/
-
-static DEFINE_MUTEX(stli_brdslock);
-static struct stlibrd	*stli_brds[STL_MAXBRDS];
-
-static int		stli_shared;
-
-/*
- *	Per board state flags. Used with the state field of the board struct.
- *	Not really much here... All we need to do is keep track of whether
- *	the board has been detected, and whether it is actually running a slave
- *	or not.
- */
-#define	BST_FOUND	0
-#define	BST_STARTED	1
-#define	BST_PROBED	2
-
-/*
- *	Define the set of port state flags. These are marked for internal
- *	state purposes only, usually to do with the state of communications
- *	with the slave. Most of them need to be updated atomically, so always
- *	use the bit setting operations (unless protected by cli/sti).
- */
-#define	ST_OPENING	2
-#define	ST_CLOSING	3
-#define	ST_CMDING	4
-#define	ST_TXBUSY	5
-#define	ST_RXING	6
-#define	ST_DOFLUSHRX	7
-#define	ST_DOFLUSHTX	8
-#define	ST_DOSIGS	9
-#define	ST_RXSTOP	10
-#define	ST_GETSIGS	11
-
-/*
- *	Define an array of board names as printable strings. Handy for
- *	referencing boards when printing trace and stuff.
- */
-static char	*stli_brdnames[] = {
-	"Unknown",
-	"Stallion",
-	"Brumby",
-	"ONboard-MC",
-	"ONboard",
-	"Brumby",
-	"Brumby",
-	"ONboard-EI",
-	NULL,
-	"ONboard",
-	"ONboard-MC",
-	"ONboard-MC",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	"EasyIO",
-	"EC8/32-AT",
-	"EC8/32-MC",
-	"EC8/64-AT",
-	"EC8/64-EI",
-	"EC8/64-MC",
-	"EC8/32-PCI",
-	"EC8/64-PCI",
-	"EasyIO-PCI",
-	"EC/RA-PCI",
-};
-
-/*****************************************************************************/
-
-/*
- *	Define some string labels for arguments passed from the module
- *	load line. These allow for easy board definitions, and easy
- *	modification of the io, memory and irq resoucres.
- */
-
-static char	*board0[8];
-static char	*board1[8];
-static char	*board2[8];
-static char	*board3[8];
-
-static char	**stli_brdsp[] = {
-	(char **) &board0,
-	(char **) &board1,
-	(char **) &board2,
-	(char **) &board3
-};
-
-/*
- *	Define a set of common board names, and types. This is used to
- *	parse any module arguments.
- */
-
-static struct stlibrdtype {
-	char	*name;
-	int	type;
-} stli_brdstr[] = {
-	{ "stallion", BRD_STALLION },
-	{ "1", BRD_STALLION },
-	{ "brumby", BRD_BRUMBY },
-	{ "brumby4", BRD_BRUMBY },
-	{ "brumby/4", BRD_BRUMBY },
-	{ "brumby-4", BRD_BRUMBY },
-	{ "brumby8", BRD_BRUMBY },
-	{ "brumby/8", BRD_BRUMBY },
-	{ "brumby-8", BRD_BRUMBY },
-	{ "brumby16", BRD_BRUMBY },
-	{ "brumby/16", BRD_BRUMBY },
-	{ "brumby-16", BRD_BRUMBY },
-	{ "2", BRD_BRUMBY },
-	{ "onboard2", BRD_ONBOARD2 },
-	{ "onboard-2", BRD_ONBOARD2 },
-	{ "onboard/2", BRD_ONBOARD2 },
-	{ "onboard-mc", BRD_ONBOARD2 },
-	{ "onboard/mc", BRD_ONBOARD2 },
-	{ "onboard-mca", BRD_ONBOARD2 },
-	{ "onboard/mca", BRD_ONBOARD2 },
-	{ "3", BRD_ONBOARD2 },
-	{ "onboard", BRD_ONBOARD },
-	{ "onboardat", BRD_ONBOARD },
-	{ "4", BRD_ONBOARD },
-	{ "onboarde", BRD_ONBOARDE },
-	{ "onboard-e", BRD_ONBOARDE },
-	{ "onboard/e", BRD_ONBOARDE },
-	{ "onboard-ei", BRD_ONBOARDE },
-	{ "onboard/ei", BRD_ONBOARDE },
-	{ "7", BRD_ONBOARDE },
-	{ "ecp", BRD_ECP },
-	{ "ecpat", BRD_ECP },
-	{ "ec8/64", BRD_ECP },
-	{ "ec8/64-at", BRD_ECP },
-	{ "ec8/64-isa", BRD_ECP },
-	{ "23", BRD_ECP },
-	{ "ecpe", BRD_ECPE },
-	{ "ecpei", BRD_ECPE },
-	{ "ec8/64-e", BRD_ECPE },
-	{ "ec8/64-ei", BRD_ECPE },
-	{ "24", BRD_ECPE },
-	{ "ecpmc", BRD_ECPMC },
-	{ "ec8/64-mc", BRD_ECPMC },
-	{ "ec8/64-mca", BRD_ECPMC },
-	{ "25", BRD_ECPMC },
-	{ "ecppci", BRD_ECPPCI },
-	{ "ec/ra", BRD_ECPPCI },
-	{ "ec/ra-pc", BRD_ECPPCI },
-	{ "ec/ra-pci", BRD_ECPPCI },
-	{ "29", BRD_ECPPCI },
-};
-
-/*
- *	Define the module agruments.
- */
-MODULE_AUTHOR("Greg Ungerer");
-MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver");
-MODULE_LICENSE("GPL");
-
-
-module_param_array(board0, charp, NULL, 0);
-MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]");
-module_param_array(board1, charp, NULL, 0);
-MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]");
-module_param_array(board2, charp, NULL, 0);
-MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]");
-module_param_array(board3, charp, NULL, 0);
-MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
-
-#if STLI_EISAPROBE != 0
-/*
- *	Set up a default memory address table for EISA board probing.
- *	The default addresses are all bellow 1Mbyte, which has to be the
- *	case anyway. They should be safe, since we only read values from
- *	them, and interrupts are disabled while we do it. If the higher
- *	memory support is compiled in then we also try probing around
- *	the 1Gb, 2Gb and 3Gb areas as well...
- */
-static unsigned long	stli_eisamemprobeaddrs[] = {
-	0xc0000,    0xd0000,    0xe0000,    0xf0000,
-	0x80000000, 0x80010000, 0x80020000, 0x80030000,
-	0x40000000, 0x40010000, 0x40020000, 0x40030000,
-	0xc0000000, 0xc0010000, 0xc0020000, 0xc0030000,
-	0xff000000, 0xff010000, 0xff020000, 0xff030000,
-};
-
-static int	stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs);
-#endif
-
-/*
- *	Define the Stallion PCI vendor and device IDs.
- */
-#ifndef PCI_DEVICE_ID_ECRA
-#define	PCI_DEVICE_ID_ECRA		0x0004
-#endif
-
-static struct pci_device_id istallion_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA), },
-	{ 0 }
-};
-MODULE_DEVICE_TABLE(pci, istallion_pci_tbl);
-
-static struct pci_driver stli_pcidriver;
-
-/*****************************************************************************/
-
-/*
- *	Hardware configuration info for ECP boards. These defines apply
- *	to the directly accessible io ports of the ECP. There is a set of
- *	defines for each ECP board type, ISA, EISA, MCA and PCI.
- */
-#define	ECP_IOSIZE	4
-
-#define	ECP_MEMSIZE	(128 * 1024)
-#define	ECP_PCIMEMSIZE	(256 * 1024)
-
-#define	ECP_ATPAGESIZE	(4 * 1024)
-#define	ECP_MCPAGESIZE	(4 * 1024)
-#define	ECP_EIPAGESIZE	(64 * 1024)
-#define	ECP_PCIPAGESIZE	(64 * 1024)
-
-#define	STL_EISAID	0x8c4e
-
-/*
- *	Important defines for the ISA class of ECP board.
- */
-#define	ECP_ATIREG	0
-#define	ECP_ATCONFR	1
-#define	ECP_ATMEMAR	2
-#define	ECP_ATMEMPR	3
-#define	ECP_ATSTOP	0x1
-#define	ECP_ATINTENAB	0x10
-#define	ECP_ATENABLE	0x20
-#define	ECP_ATDISABLE	0x00
-#define	ECP_ATADDRMASK	0x3f000
-#define	ECP_ATADDRSHFT	12
-
-/*
- *	Important defines for the EISA class of ECP board.
- */
-#define	ECP_EIIREG	0
-#define	ECP_EIMEMARL	1
-#define	ECP_EICONFR	2
-#define	ECP_EIMEMARH	3
-#define	ECP_EIENABLE	0x1
-#define	ECP_EIDISABLE	0x0
-#define	ECP_EISTOP	0x4
-#define	ECP_EIEDGE	0x00
-#define	ECP_EILEVEL	0x80
-#define	ECP_EIADDRMASKL	0x00ff0000
-#define	ECP_EIADDRSHFTL	16
-#define	ECP_EIADDRMASKH	0xff000000
-#define	ECP_EIADDRSHFTH	24
-#define	ECP_EIBRDENAB	0xc84
-
-#define	ECP_EISAID	0x4
-
-/*
- *	Important defines for the Micro-channel class of ECP board.
- *	(It has a lot in common with the ISA boards.)
- */
-#define	ECP_MCIREG	0
-#define	ECP_MCCONFR	1
-#define	ECP_MCSTOP	0x20
-#define	ECP_MCENABLE	0x80
-#define	ECP_MCDISABLE	0x00
-
-/*
- *	Important defines for the PCI class of ECP board.
- *	(It has a lot in common with the other ECP boards.)
- */
-#define	ECP_PCIIREG	0
-#define	ECP_PCICONFR	1
-#define	ECP_PCISTOP	0x01
-
-/*
- *	Hardware configuration info for ONboard and Brumby boards. These
- *	defines apply to the directly accessible io ports of these boards.
- */
-#define	ONB_IOSIZE	16
-#define	ONB_MEMSIZE	(64 * 1024)
-#define	ONB_ATPAGESIZE	(64 * 1024)
-#define	ONB_MCPAGESIZE	(64 * 1024)
-#define	ONB_EIMEMSIZE	(128 * 1024)
-#define	ONB_EIPAGESIZE	(64 * 1024)
-
-/*
- *	Important defines for the ISA class of ONboard board.
- */
-#define	ONB_ATIREG	0
-#define	ONB_ATMEMAR	1
-#define	ONB_ATCONFR	2
-#define	ONB_ATSTOP	0x4
-#define	ONB_ATENABLE	0x01
-#define	ONB_ATDISABLE	0x00
-#define	ONB_ATADDRMASK	0xff0000
-#define	ONB_ATADDRSHFT	16
-
-#define	ONB_MEMENABLO	0
-#define	ONB_MEMENABHI	0x02
-
-/*
- *	Important defines for the EISA class of ONboard board.
- */
-#define	ONB_EIIREG	0
-#define	ONB_EIMEMARL	1
-#define	ONB_EICONFR	2
-#define	ONB_EIMEMARH	3
-#define	ONB_EIENABLE	0x1
-#define	ONB_EIDISABLE	0x0
-#define	ONB_EISTOP	0x4
-#define	ONB_EIEDGE	0x00
-#define	ONB_EILEVEL	0x80
-#define	ONB_EIADDRMASKL	0x00ff0000
-#define	ONB_EIADDRSHFTL	16
-#define	ONB_EIADDRMASKH	0xff000000
-#define	ONB_EIADDRSHFTH	24
-#define	ONB_EIBRDENAB	0xc84
-
-#define	ONB_EISAID	0x1
-
-/*
- *	Important defines for the Brumby boards. They are pretty simple,
- *	there is not much that is programmably configurable.
- */
-#define	BBY_IOSIZE	16
-#define	BBY_MEMSIZE	(64 * 1024)
-#define	BBY_PAGESIZE	(16 * 1024)
-
-#define	BBY_ATIREG	0
-#define	BBY_ATCONFR	1
-#define	BBY_ATSTOP	0x4
-
-/*
- *	Important defines for the Stallion boards. They are pretty simple,
- *	there is not much that is programmably configurable.
- */
-#define	STAL_IOSIZE	16
-#define	STAL_MEMSIZE	(64 * 1024)
-#define	STAL_PAGESIZE	(64 * 1024)
-
-/*
- *	Define the set of status register values for EasyConnection panels.
- *	The signature will return with the status value for each panel. From
- *	this we can determine what is attached to the board - before we have
- *	actually down loaded any code to it.
- */
-#define	ECH_PNLSTATUS	2
-#define	ECH_PNL16PORT	0x20
-#define	ECH_PNLIDMASK	0x07
-#define	ECH_PNLXPID	0x40
-#define	ECH_PNLINTRPEND	0x80
-
-/*
- *	Define some macros to do things to the board. Even those these boards
- *	are somewhat related there is often significantly different ways of
- *	doing some operation on it (like enable, paging, reset, etc). So each
- *	board class has a set of functions which do the commonly required
- *	operations. The macros below basically just call these functions,
- *	generally checking for a NULL function - which means that the board
- *	needs nothing done to it to achieve this operation!
- */
-#define	EBRDINIT(brdp)						\
-	if (brdp->init != NULL)					\
-		(* brdp->init)(brdp)
-
-#define	EBRDENABLE(brdp)					\
-	if (brdp->enable != NULL)				\
-		(* brdp->enable)(brdp);
-
-#define	EBRDDISABLE(brdp)					\
-	if (brdp->disable != NULL)				\
-		(* brdp->disable)(brdp);
-
-#define	EBRDINTR(brdp)						\
-	if (brdp->intr != NULL)					\
-		(* brdp->intr)(brdp);
-
-#define	EBRDRESET(brdp)						\
-	if (brdp->reset != NULL)				\
-		(* brdp->reset)(brdp);
-
-#define	EBRDGETMEMPTR(brdp,offset)				\
-	(* brdp->getmemptr)(brdp, offset, __LINE__)
-
-/*
- *	Define the maximal baud rate, and the default baud base for ports.
- */
-#define	STL_MAXBAUD	460800
-#define	STL_BAUDBASE	115200
-#define	STL_CLOSEDELAY	(5 * HZ / 10)
-
-/*****************************************************************************/
-
-/*
- *	Define macros to extract a brd or port number from a minor number.
- */
-#define	MINOR2BRD(min)		(((min) & 0xc0) >> 6)
-#define	MINOR2PORT(min)		((min) & 0x3f)
-
-/*****************************************************************************/
-
-/*
- *	Prototype all functions in this driver!
- */
-
-static int	stli_parsebrd(struct stlconf *confp, char **argp);
-static int	stli_open(struct tty_struct *tty, struct file *filp);
-static void	stli_close(struct tty_struct *tty, struct file *filp);
-static int	stli_write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int	stli_putchar(struct tty_struct *tty, unsigned char ch);
-static void	stli_flushchars(struct tty_struct *tty);
-static int	stli_writeroom(struct tty_struct *tty);
-static int	stli_charsinbuffer(struct tty_struct *tty);
-static int	stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static void	stli_settermios(struct tty_struct *tty, struct ktermios *old);
-static void	stli_throttle(struct tty_struct *tty);
-static void	stli_unthrottle(struct tty_struct *tty);
-static void	stli_stop(struct tty_struct *tty);
-static void	stli_start(struct tty_struct *tty);
-static void	stli_flushbuffer(struct tty_struct *tty);
-static int	stli_breakctl(struct tty_struct *tty, int state);
-static void	stli_waituntilsent(struct tty_struct *tty, int timeout);
-static void	stli_sendxchar(struct tty_struct *tty, char ch);
-static void	stli_hangup(struct tty_struct *tty);
-
-static int	stli_brdinit(struct stlibrd *brdp);
-static int	stli_startbrd(struct stlibrd *brdp);
-static ssize_t	stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp);
-static ssize_t	stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp);
-static long	stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg);
-static void	stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
-static void	stli_poll(unsigned long arg);
-static int	stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
-static int	stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
-static int	stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int	stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int	stli_setport(struct tty_struct *tty);
-static int	stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void	stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void	__stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void	stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
-static void	stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
-static void	stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
-static long	stli_mktiocm(unsigned long sigvalue);
-static void	stli_read(struct stlibrd *brdp, struct stliport *portp);
-static int	stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
-static int	stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp);
-static int	stli_getbrdstats(combrd_t __user *bp);
-static int	stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp);
-static int	stli_portcmdstats(struct tty_struct *tty, struct stliport *portp);
-static int	stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
-static int	stli_getportstruct(struct stliport __user *arg);
-static int	stli_getbrdstruct(struct stlibrd __user *arg);
-static struct stlibrd *stli_allocbrd(void);
-
-static void	stli_ecpinit(struct stlibrd *brdp);
-static void	stli_ecpenable(struct stlibrd *brdp);
-static void	stli_ecpdisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_ecpreset(struct stlibrd *brdp);
-static void	stli_ecpintr(struct stlibrd *brdp);
-static void	stli_ecpeiinit(struct stlibrd *brdp);
-static void	stli_ecpeienable(struct stlibrd *brdp);
-static void	stli_ecpeidisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_ecpeireset(struct stlibrd *brdp);
-static void	stli_ecpmcenable(struct stlibrd *brdp);
-static void	stli_ecpmcdisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_ecpmcreset(struct stlibrd *brdp);
-static void	stli_ecppciinit(struct stlibrd *brdp);
-static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_ecppcireset(struct stlibrd *brdp);
-
-static void	stli_onbinit(struct stlibrd *brdp);
-static void	stli_onbenable(struct stlibrd *brdp);
-static void	stli_onbdisable(struct stlibrd *brdp);
-static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_onbreset(struct stlibrd *brdp);
-static void	stli_onbeinit(struct stlibrd *brdp);
-static void	stli_onbeenable(struct stlibrd *brdp);
-static void	stli_onbedisable(struct stlibrd *brdp);
-static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_onbereset(struct stlibrd *brdp);
-static void	stli_bbyinit(struct stlibrd *brdp);
-static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_bbyreset(struct stlibrd *brdp);
-static void	stli_stalinit(struct stlibrd *brdp);
-static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void	stli_stalreset(struct stlibrd *brdp);
-
-static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr);
-
-static int	stli_initecp(struct stlibrd *brdp);
-static int	stli_initonb(struct stlibrd *brdp);
-#if STLI_EISAPROBE != 0
-static int	stli_eisamemprobe(struct stlibrd *brdp);
-#endif
-static int	stli_initports(struct stlibrd *brdp);
-
-/*****************************************************************************/
-
-/*
- *	Define the driver info for a user level shared memory device. This
- *	device will work sort of like the /dev/kmem device - except that it
- *	will give access to the shared memory on the Stallion intelligent
- *	board. This is also a very useful debugging tool.
- */
-static const struct file_operations	stli_fsiomem = {
-	.owner		= THIS_MODULE,
-	.read		= stli_memread,
-	.write		= stli_memwrite,
-	.unlocked_ioctl	= stli_memioctl,
-	.llseek		= default_llseek,
-};
-
-/*****************************************************************************/
-
-/*
- *	Define a timer_list entry for our poll routine. The slave board
- *	is polled every so often to see if anything needs doing. This is
- *	much cheaper on host cpu than using interrupts. It turns out to
- *	not increase character latency by much either...
- */
-static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0);
-
-static int	stli_timeron;
-
-/*
- *	Define the calculation for the timeout routine.
- */
-#define	STLI_TIMEOUT	(jiffies + 1)
-
-/*****************************************************************************/
-
-static struct class *istallion_class;
-
-static void stli_cleanup_ports(struct stlibrd *brdp)
-{
-	struct stliport *portp;
-	unsigned int j;
-	struct tty_struct *tty;
-
-	for (j = 0; j < STL_MAXPORTS; j++) {
-		portp = brdp->ports[j];
-		if (portp != NULL) {
-			tty = tty_port_tty_get(&portp->port);
-			if (tty != NULL) {
-				tty_hangup(tty);
-				tty_kref_put(tty);
-			}
-			kfree(portp);
-		}
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Parse the supplied argument string, into the board conf struct.
- */
-
-static int stli_parsebrd(struct stlconf *confp, char **argp)
-{
-	unsigned int i;
-	char *sp;
-
-	if (argp[0] == NULL || *argp[0] == 0)
-		return 0;
-
-	for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
-		*sp = tolower(*sp);
-
-	for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) {
-		if (strcmp(stli_brdstr[i].name, argp[0]) == 0)
-			break;
-	}
-	if (i == ARRAY_SIZE(stli_brdstr)) {
-		printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
-		return 0;
-	}
-
-	confp->brdtype = stli_brdstr[i].type;
-	if (argp[1] != NULL && *argp[1] != 0)
-		confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0);
-	if (argp[2] !=  NULL && *argp[2] != 0)
-		confp->memaddr = simple_strtoul(argp[2], NULL, 0);
-	return(1);
-}
-
-/*****************************************************************************/
-
-/*
- *	On the first open of the device setup the port hardware, and
- *	initialize the per port data structure. Since initializing the port
- *	requires several commands to the board we will need to wait for any
- *	other open that is already initializing the port.
- *
- *	Locking: protected by the port mutex.
- */
-
-static int stli_activate(struct tty_port *port, struct tty_struct *tty)
-{
-	struct stliport *portp = container_of(port, struct stliport, port);
-	struct stlibrd *brdp = stli_brds[portp->brdnr];
-	int rc;
-
-	if ((rc = stli_initopen(tty, brdp, portp)) >= 0)
-		clear_bit(TTY_IO_ERROR, &tty->flags);
-	wake_up_interruptible(&portp->raw_wait);
-	return rc;
-}
-
-static int stli_open(struct tty_struct *tty, struct file *filp)
-{
-	struct stlibrd *brdp;
-	struct stliport *portp;
-	unsigned int minordev, brdnr, portnr;
-
-	minordev = tty->index;
-	brdnr = MINOR2BRD(minordev);
-	if (brdnr >= stli_nrbrds)
-		return -ENODEV;
-	brdp = stli_brds[brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-	if (!test_bit(BST_STARTED, &brdp->state))
-		return -ENODEV;
-	portnr = MINOR2PORT(minordev);
-	if (portnr > brdp->nrports)
-		return -ENODEV;
-
-	portp = brdp->ports[portnr];
-	if (portp == NULL)
-		return -ENODEV;
-	if (portp->devnr < 1)
-		return -ENODEV;
-
-	tty->driver_data = portp;
-	return tty_port_open(&portp->port, tty, filp);
-}
-
-
-/*****************************************************************************/
-
-static void stli_shutdown(struct tty_port *port)
-{
-	struct stlibrd *brdp;
-	unsigned long ftype;
-	unsigned long flags;
-	struct stliport *portp = container_of(port, struct stliport, port);
-
-	if (portp->brdnr >= stli_nrbrds)
-		return;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-	/*
-	 *	May want to wait for data to drain before closing. The BUSY
-	 *	flag keeps track of whether we are still transmitting or not.
-	 *	It is updated by messages from the slave - indicating when all
-	 *	chars really have drained.
-	 */
-
-	if (!test_bit(ST_CLOSING, &portp->state))
-		stli_rawclose(brdp, portp, 0, 0);
-
- 	spin_lock_irqsave(&stli_lock, flags);
-	clear_bit(ST_TXBUSY, &portp->state);
-	clear_bit(ST_RXSTOP, &portp->state);
-	spin_unlock_irqrestore(&stli_lock, flags);
-
-	ftype = FLUSHTX | FLUSHRX;
-	stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
-}
-
-static void stli_close(struct tty_struct *tty, struct file *filp)
-{
-	struct stliport *portp = tty->driver_data;
-	unsigned long flags;
-	if (portp == NULL)
-		return;
- 	spin_lock_irqsave(&stli_lock, flags);
-	/*	Flush any internal buffering out first */
-	if (tty == stli_txcooktty)
-		stli_flushchars(tty);
-	spin_unlock_irqrestore(&stli_lock, flags);
-	tty_port_close(&portp->port, tty, filp);
-}
-
-/*****************************************************************************/
-
-/*
- *	Carry out first open operations on a port. This involves a number of
- *	commands to be sent to the slave. We need to open the port, set the
- *	notification events, set the initial port settings, get and set the
- *	initial signal values. We sleep and wait in between each one. But
- *	this still all happens pretty quickly.
- */
-
-static int stli_initopen(struct tty_struct *tty,
-				struct stlibrd *brdp, struct stliport *portp)
-{
-	asynotify_t nt;
-	asyport_t aport;
-	int rc;
-
-	if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0)
-		return rc;
-
-	memset(&nt, 0, sizeof(asynotify_t));
-	nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK);
-	nt.signal = SG_DCD;
-	if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt,
-	    sizeof(asynotify_t), 0)) < 0)
-		return rc;
-
-	stli_mkasyport(tty, portp, &aport, tty->termios);
-	if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
-	    sizeof(asyport_t), 0)) < 0)
-		return rc;
-
-	set_bit(ST_GETSIGS, &portp->state);
-	if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig,
-	    sizeof(asysigs_t), 1)) < 0)
-		return rc;
-	if (test_and_clear_bit(ST_GETSIGS, &portp->state))
-		portp->sigs = stli_mktiocm(portp->asig.sigvalue);
-	stli_mkasysigs(&portp->asig, 1, 1);
-	if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
-	    sizeof(asysigs_t), 0)) < 0)
-		return rc;
-
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Send an open message to the slave. This will sleep waiting for the
- *	acknowledgement, so must have user context. We need to co-ordinate
- *	with close events here, since we don't want open and close events
- *	to overlap.
- */
-
-static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
-{
-	cdkhdr_t __iomem *hdrp;
-	cdkctrl_t __iomem *cp;
-	unsigned char __iomem *bits;
-	unsigned long flags;
-	int rc;
-
-/*
- *	Send a message to the slave to open this port.
- */
-
-/*
- *	Slave is already closing this port. This can happen if a hangup
- *	occurs on this port. So we must wait until it is complete. The
- *	order of opens and closes may not be preserved across shared
- *	memory, so we must wait until it is complete.
- */
-	wait_event_interruptible_tty(portp->raw_wait,
-			!test_bit(ST_CLOSING, &portp->state));
-	if (signal_pending(current)) {
-		return -ERESTARTSYS;
-	}
-
-/*
- *	Everything is ready now, so write the open message into shared
- *	memory. Once the message is in set the service bits to say that
- *	this port wants service.
- */
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
-	writel(arg, &cp->openarg);
-	writeb(1, &cp->open);
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
-		portp->portidx;
-	writeb(readb(bits) | portp->portbit, bits);
-	EBRDDISABLE(brdp);
-
-	if (wait == 0) {
-		spin_unlock_irqrestore(&brd_lock, flags);
-		return 0;
-	}
-
-/*
- *	Slave is in action, so now we must wait for the open acknowledgment
- *	to come back.
- */
-	rc = 0;
-	set_bit(ST_OPENING, &portp->state);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	wait_event_interruptible_tty(portp->raw_wait,
-			!test_bit(ST_OPENING, &portp->state));
-	if (signal_pending(current))
-		rc = -ERESTARTSYS;
-
-	if ((rc == 0) && (portp->rc != 0))
-		rc = -EIO;
-	return rc;
-}
-
-/*****************************************************************************/
-
-/*
- *	Send a close message to the slave. Normally this will sleep waiting
- *	for the acknowledgement, but if wait parameter is 0 it will not. If
- *	wait is true then must have user context (to sleep).
- */
-
-static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
-{
-	cdkhdr_t __iomem *hdrp;
-	cdkctrl_t __iomem *cp;
-	unsigned char __iomem *bits;
-	unsigned long flags;
-	int rc;
-
-/*
- *	Slave is already closing this port. This can happen if a hangup
- *	occurs on this port.
- */
-	if (wait) {
-		wait_event_interruptible_tty(portp->raw_wait,
-				!test_bit(ST_CLOSING, &portp->state));
-		if (signal_pending(current)) {
-			return -ERESTARTSYS;
-		}
-	}
-
-/*
- *	Write the close command into shared memory.
- */
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
-	writel(arg, &cp->closearg);
-	writeb(1, &cp->close);
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
-		portp->portidx;
-	writeb(readb(bits) |portp->portbit, bits);
-	EBRDDISABLE(brdp);
-
-	set_bit(ST_CLOSING, &portp->state);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	if (wait == 0)
-		return 0;
-
-/*
- *	Slave is in action, so now we must wait for the open acknowledgment
- *	to come back.
- */
-	rc = 0;
-	wait_event_interruptible_tty(portp->raw_wait,
-			!test_bit(ST_CLOSING, &portp->state));
-	if (signal_pending(current))
-		rc = -ERESTARTSYS;
-
-	if ((rc == 0) && (portp->rc != 0))
-		rc = -EIO;
-	return rc;
-}
-
-/*****************************************************************************/
-
-/*
- *	Send a command to the slave and wait for the response. This must
- *	have user context (it sleeps). This routine is generic in that it
- *	can send any type of command. Its purpose is to wait for that command
- *	to complete (as opposed to initiating the command then returning).
- */
-
-static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
-	/*
-	 * no need for wait_event_tty because clearing ST_CMDING cannot block
-	 * on BTM
-	 */
-	wait_event_interruptible(portp->raw_wait,
-			!test_bit(ST_CMDING, &portp->state));
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-
-	stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
-
-	wait_event_interruptible(portp->raw_wait,
-			!test_bit(ST_CMDING, &portp->state));
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-
-	if (portp->rc != 0)
-		return -EIO;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Send the termios settings for this port to the slave. This sleeps
- *	waiting for the command to complete - so must have user context.
- */
-
-static int stli_setport(struct tty_struct *tty)
-{
-	struct stliport *portp = tty->driver_data;
-	struct stlibrd *brdp;
-	asyport_t aport;
-
-	if (portp == NULL)
-		return -ENODEV;
-	if (portp->brdnr >= stli_nrbrds)
-		return -ENODEV;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-
-	stli_mkasyport(tty, portp, &aport, tty->termios);
-	return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
-}
-
-/*****************************************************************************/
-
-static int stli_carrier_raised(struct tty_port *port)
-{
-	struct stliport *portp = container_of(port, struct stliport, port);
-	return (portp->sigs & TIOCM_CD) ? 1 : 0;
-}
-
-static void stli_dtr_rts(struct tty_port *port, int on)
-{
-	struct stliport *portp = container_of(port, struct stliport, port);
-	struct stlibrd *brdp = stli_brds[portp->brdnr];
-	stli_mkasysigs(&portp->asig, on, on);
-	if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
-		sizeof(asysigs_t), 0) < 0)
-			printk(KERN_WARNING "istallion: dtr set failed.\n");
-}
-
-
-/*****************************************************************************/
-
-/*
- *	Write routine. Take the data and put it in the shared memory ring
- *	queue. If port is not already sending chars then need to mark the
- *	service bits for this port.
- */
-
-static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	cdkasy_t __iomem *ap;
-	cdkhdr_t __iomem *hdrp;
-	unsigned char __iomem *bits;
-	unsigned char __iomem *shbuf;
-	unsigned char *chbuf;
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	unsigned int len, stlen, head, tail, size;
-	unsigned long flags;
-
-	if (tty == stli_txcooktty)
-		stli_flushchars(tty);
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-	chbuf = (unsigned char *) buf;
-
-/*
- *	All data is now local, shove as much as possible into shared memory.
- */
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-	head = (unsigned int) readw(&ap->txq.head);
-	tail = (unsigned int) readw(&ap->txq.tail);
-	if (tail != ((unsigned int) readw(&ap->txq.tail)))
-		tail = (unsigned int) readw(&ap->txq.tail);
-	size = portp->txsize;
-	if (head >= tail) {
-		len = size - (head - tail) - 1;
-		stlen = size - head;
-	} else {
-		len = tail - head - 1;
-		stlen = len;
-	}
-
-	len = min(len, (unsigned int)count);
-	count = 0;
-	shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset);
-
-	while (len > 0) {
-		stlen = min(len, stlen);
-		memcpy_toio(shbuf + head, chbuf, stlen);
-		chbuf += stlen;
-		len -= stlen;
-		count += stlen;
-		head += stlen;
-		if (head >= size) {
-			head = 0;
-			stlen = tail;
-		}
-	}
-
-	ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-	writew(head, &ap->txq.head);
-	if (test_bit(ST_TXBUSY, &portp->state)) {
-		if (readl(&ap->changed.data) & DT_TXEMPTY)
-			writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
-	}
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
-		portp->portidx;
-	writeb(readb(bits) | portp->portbit, bits);
-	set_bit(ST_TXBUSY, &portp->state);
-	EBRDDISABLE(brdp);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	return(count);
-}
-
-/*****************************************************************************/
-
-/*
- *	Output a single character. We put it into a temporary local buffer
- *	(for speed) then write out that buffer when the flushchars routine
- *	is called. There is a safety catch here so that if some other port
- *	writes chars before the current buffer has been, then we write them
- *	first them do the new ports.
- */
-
-static int stli_putchar(struct tty_struct *tty, unsigned char ch)
-{
-	if (tty != stli_txcooktty) {
-		if (stli_txcooktty != NULL)
-			stli_flushchars(stli_txcooktty);
-		stli_txcooktty = tty;
-	}
-
-	stli_txcookbuf[stli_txcooksize++] = ch;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Transfer characters from the local TX cooking buffer to the board.
- *	We sort of ignore the tty that gets passed in here. We rely on the
- *	info stored with the TX cook buffer to tell us which port to flush
- *	the data on. In any case we clean out the TX cook buffer, for re-use
- *	by someone else.
- */
-
-static void stli_flushchars(struct tty_struct *tty)
-{
-	cdkhdr_t __iomem *hdrp;
-	unsigned char __iomem *bits;
-	cdkasy_t __iomem *ap;
-	struct tty_struct *cooktty;
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	unsigned int len, stlen, head, tail, size, count, cooksize;
-	unsigned char *buf;
-	unsigned char __iomem *shbuf;
-	unsigned long flags;
-
-	cooksize = stli_txcooksize;
-	cooktty = stli_txcooktty;
-	stli_txcooksize = 0;
-	stli_txcookrealsize = 0;
-	stli_txcooktty = NULL;
-
-	if (cooktty == NULL)
-		return;
-	if (tty != cooktty)
-		tty = cooktty;
-	if (cooksize == 0)
-		return;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	if (portp->brdnr >= stli_nrbrds)
-		return;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-
-	ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-	head = (unsigned int) readw(&ap->txq.head);
-	tail = (unsigned int) readw(&ap->txq.tail);
-	if (tail != ((unsigned int) readw(&ap->txq.tail)))
-		tail = (unsigned int) readw(&ap->txq.tail);
-	size = portp->txsize;
-	if (head >= tail) {
-		len = size - (head - tail) - 1;
-		stlen = size - head;
-	} else {
-		len = tail - head - 1;
-		stlen = len;
-	}
-
-	len = min(len, cooksize);
-	count = 0;
-	shbuf = EBRDGETMEMPTR(brdp, portp->txoffset);
-	buf = stli_txcookbuf;
-
-	while (len > 0) {
-		stlen = min(len, stlen);
-		memcpy_toio(shbuf + head, buf, stlen);
-		buf += stlen;
-		len -= stlen;
-		count += stlen;
-		head += stlen;
-		if (head >= size) {
-			head = 0;
-			stlen = tail;
-		}
-	}
-
-	ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-	writew(head, &ap->txq.head);
-
-	if (test_bit(ST_TXBUSY, &portp->state)) {
-		if (readl(&ap->changed.data) & DT_TXEMPTY)
-			writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
-	}
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
-		portp->portidx;
-	writeb(readb(bits) | portp->portbit, bits);
-	set_bit(ST_TXBUSY, &portp->state);
-
-	EBRDDISABLE(brdp);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static int stli_writeroom(struct tty_struct *tty)
-{
-	cdkasyrq_t __iomem *rp;
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	unsigned int head, tail, len;
-	unsigned long flags;
-
-	if (tty == stli_txcooktty) {
-		if (stli_txcookrealsize != 0) {
-			len = stli_txcookrealsize - stli_txcooksize;
-			return len;
-		}
-	}
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
-	head = (unsigned int) readw(&rp->head);
-	tail = (unsigned int) readw(&rp->tail);
-	if (tail != ((unsigned int) readw(&rp->tail)))
-		tail = (unsigned int) readw(&rp->tail);
-	len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head);
-	len--;
-	EBRDDISABLE(brdp);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	if (tty == stli_txcooktty) {
-		stli_txcookrealsize = len;
-		len -= stli_txcooksize;
-	}
-	return len;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the number of characters in the transmit buffer. Normally we
- *	will return the number of chars in the shared memory ring queue.
- *	We need to kludge around the case where the shared memory buffer is
- *	empty but not all characters have drained yet, for this case just
- *	return that there is 1 character in the buffer!
- */
-
-static int stli_charsinbuffer(struct tty_struct *tty)
-{
-	cdkasyrq_t __iomem *rp;
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	unsigned int head, tail, len;
-	unsigned long flags;
-
-	if (tty == stli_txcooktty)
-		stli_flushchars(tty);
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
-	head = (unsigned int) readw(&rp->head);
-	tail = (unsigned int) readw(&rp->tail);
-	if (tail != ((unsigned int) readw(&rp->tail)))
-		tail = (unsigned int) readw(&rp->tail);
-	len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head));
-	if ((len == 0) && test_bit(ST_TXBUSY, &portp->state))
-		len = 1;
-	EBRDDISABLE(brdp);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	return len;
-}
-
-/*****************************************************************************/
-
-/*
- *	Generate the serial struct info.
- */
-
-static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp)
-{
-	struct serial_struct sio;
-	struct stlibrd *brdp;
-
-	memset(&sio, 0, sizeof(struct serial_struct));
-	sio.type = PORT_UNKNOWN;
-	sio.line = portp->portnr;
-	sio.irq = 0;
-	sio.flags = portp->port.flags;
-	sio.baud_base = portp->baud_base;
-	sio.close_delay = portp->port.close_delay;
-	sio.closing_wait = portp->closing_wait;
-	sio.custom_divisor = portp->custom_divisor;
-	sio.xmit_fifo_size = 0;
-	sio.hub6 = 0;
-
-	brdp = stli_brds[portp->brdnr];
-	if (brdp != NULL)
-		sio.port = brdp->iobase;
-		
-	return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ?
-			-EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Set port according to the serial struct info.
- *	At this point we do not do any auto-configure stuff, so we will
- *	just quietly ignore any requests to change irq, etc.
- */
-
-static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
-{
-	struct serial_struct sio;
-	int rc;
-	struct stliport *portp = tty->driver_data;
-
-	if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
-		return -EFAULT;
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((sio.baud_base != portp->baud_base) ||
-		    (sio.close_delay != portp->port.close_delay) ||
-		    ((sio.flags & ~ASYNC_USR_MASK) !=
-		    (portp->port.flags & ~ASYNC_USR_MASK)))
-			return -EPERM;
-	} 
-
-	portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
-		(sio.flags & ASYNC_USR_MASK);
-	portp->baud_base = sio.baud_base;
-	portp->port.close_delay = sio.close_delay;
-	portp->closing_wait = sio.closing_wait;
-	portp->custom_divisor = sio.custom_divisor;
-
-	if ((rc = stli_setport(tty)) < 0)
-		return rc;
-	return 0;
-}
-
-/*****************************************************************************/
-
-static int stli_tiocmget(struct tty_struct *tty)
-{
-	struct stliport *portp = tty->driver_data;
-	struct stlibrd *brdp;
-	int rc;
-
-	if (portp == NULL)
-		return -ENODEV;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS,
-			       &portp->asig, sizeof(asysigs_t), 1)) < 0)
-		return rc;
-
-	return stli_mktiocm(portp->asig.sigvalue);
-}
-
-static int stli_tiocmset(struct tty_struct *tty,
-			 unsigned int set, unsigned int clear)
-{
-	struct stliport *portp = tty->driver_data;
-	struct stlibrd *brdp;
-	int rts = -1, dtr = -1;
-
-	if (portp == NULL)
-		return -ENODEV;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if (set & TIOCM_RTS)
-		rts = 1;
-	if (set & TIOCM_DTR)
-		dtr = 1;
-	if (clear & TIOCM_RTS)
-		rts = 0;
-	if (clear & TIOCM_DTR)
-		dtr = 0;
-
-	stli_mkasysigs(&portp->asig, dtr, rts);
-
-	return stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
-			    sizeof(asysigs_t), 0);
-}
-
-static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	int rc;
-	void __user *argp = (void __user *)arg;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -ENODEV;
-	if (portp->brdnr >= stli_nrbrds)
-		return 0;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return 0;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- 	    (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-			return -EIO;
-	}
-
-	rc = 0;
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		rc = stli_getserial(portp, argp);
-		break;
-	case TIOCSSERIAL:
-		rc = stli_setserial(tty, argp);
-		break;
-	case STL_GETPFLAG:
-		rc = put_user(portp->pflag, (unsigned __user *)argp);
-		break;
-	case STL_SETPFLAG:
-		if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0)
-			stli_setport(tty);
-		break;
-	case COM_GETPORTSTATS:
-		rc = stli_getportstats(tty, portp, argp);
-		break;
-	case COM_CLRPORTSTATS:
-		rc = stli_clrportstats(portp, argp);
-		break;
-	case TIOCSERCONFIG:
-	case TIOCSERGWILD:
-	case TIOCSERSWILD:
-	case TIOCSERGETLSR:
-	case TIOCSERGSTRUCT:
-	case TIOCSERGETMULTI:
-	case TIOCSERSETMULTI:
-	default:
-		rc = -ENOIOCTLCMD;
-		break;
-	}
-
-	return rc;
-}
-
-/*****************************************************************************/
-
-/*
- *	This routine assumes that we have user context and can sleep.
- *	Looks like it is true for the current ttys implementation..!!
- */
-
-static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
-{
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	struct ktermios *tiosp;
-	asyport_t aport;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	if (portp->brdnr >= stli_nrbrds)
-		return;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-	tiosp = tty->termios;
-
-	stli_mkasyport(tty, portp, &aport, tiosp);
-	stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
-	stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1);
-	stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
-		sizeof(asysigs_t), 0);
-	if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0))
-		tty->hw_stopped = 0;
-	if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
-		wake_up_interruptible(&portp->port.open_wait);
-}
-
-/*****************************************************************************/
-
-/*
- *	Attempt to flow control who ever is sending us data. We won't really
- *	do any flow control action here. We can't directly, and even if we
- *	wanted to we would have to send a command to the slave. The slave
- *	knows how to flow control, and will do so when its buffers reach its
- *	internal high water marks. So what we will do is set a local state
- *	bit that will stop us sending any RX data up from the poll routine
- *	(which is the place where RX data from the slave is handled).
- */
-
-static void stli_throttle(struct tty_struct *tty)
-{
-	struct stliport	*portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	set_bit(ST_RXSTOP, &portp->state);
-}
-
-/*****************************************************************************/
-
-/*
- *	Unflow control the device sending us data... That means that all
- *	we have to do is clear the RXSTOP state bit. The next poll call
- *	will then be able to pass the RX data back up.
- */
-
-static void stli_unthrottle(struct tty_struct *tty)
-{
-	struct stliport	*portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	clear_bit(ST_RXSTOP, &portp->state);
-}
-
-/*****************************************************************************/
-
-/*
- *	Stop the transmitter.
- */
-
-static void stli_stop(struct tty_struct *tty)
-{
-}
-
-/*****************************************************************************/
-
-/*
- *	Start the transmitter again.
- */
-
-static void stli_start(struct tty_struct *tty)
-{
-}
-
-/*****************************************************************************/
-
-
-/*
- *	Hangup this port. This is pretty much like closing the port, only
- *	a little more brutal. No waiting for data to drain. Shutdown the
- *	port and maybe drop signals. This is rather tricky really. We want
- *	to close the port as well.
- */
-
-static void stli_hangup(struct tty_struct *tty)
-{
-	struct stliport *portp = tty->driver_data;
-	tty_port_hangup(&portp->port);
-}
-
-/*****************************************************************************/
-
-/*
- *	Flush characters from the lower buffer. We may not have user context
- *	so we cannot sleep waiting for it to complete. Also we need to check
- *	if there is chars for this port in the TX cook buffer, and flush them
- *	as well.
- */
-
-static void stli_flushbuffer(struct tty_struct *tty)
-{
-	struct stliport *portp;
-	struct stlibrd *brdp;
-	unsigned long ftype, flags;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	if (portp->brdnr >= stli_nrbrds)
-		return;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	if (tty == stli_txcooktty) {
-		stli_txcooktty = NULL;
-		stli_txcooksize = 0;
-		stli_txcookrealsize = 0;
-	}
-	if (test_bit(ST_CMDING, &portp->state)) {
-		set_bit(ST_DOFLUSHTX, &portp->state);
-	} else {
-		ftype = FLUSHTX;
-		if (test_bit(ST_DOFLUSHRX, &portp->state)) {
-			ftype |= FLUSHRX;
-			clear_bit(ST_DOFLUSHRX, &portp->state);
-		}
-		__stli_sendcmd(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
-	}
-	spin_unlock_irqrestore(&brd_lock, flags);
-	tty_wakeup(tty);
-}
-
-/*****************************************************************************/
-
-static int stli_breakctl(struct tty_struct *tty, int state)
-{
-	struct stlibrd	*brdp;
-	struct stliport	*portp;
-	long		arg;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -EINVAL;
-	if (portp->brdnr >= stli_nrbrds)
-		return -EINVAL;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return -EINVAL;
-
-	arg = (state == -1) ? BREAKON : BREAKOFF;
-	stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0);
-	return 0;
-}
-
-/*****************************************************************************/
-
-static void stli_waituntilsent(struct tty_struct *tty, int timeout)
-{
-	struct stliport *portp;
-	unsigned long tend;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-
-	if (timeout == 0)
-		timeout = HZ;
-	tend = jiffies + timeout;
-
-	while (test_bit(ST_TXBUSY, &portp->state)) {
-		if (signal_pending(current))
-			break;
-		msleep_interruptible(20);
-		if (time_after_eq(jiffies, tend))
-			break;
-	}
-}
-
-/*****************************************************************************/
-
-static void stli_sendxchar(struct tty_struct *tty, char ch)
-{
-	struct stlibrd	*brdp;
-	struct stliport	*portp;
-	asyctrl_t	actrl;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	if (portp->brdnr >= stli_nrbrds)
-		return;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-	memset(&actrl, 0, sizeof(asyctrl_t));
-	if (ch == STOP_CHAR(tty)) {
-		actrl.rxctrl = CT_STOPFLOW;
-	} else if (ch == START_CHAR(tty)) {
-		actrl.rxctrl = CT_STARTFLOW;
-	} else {
-		actrl.txctrl = CT_SENDCHR;
-		actrl.tximdch = ch;
-	}
-	stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
-}
-
-static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr)
-{
-	char *uart;
-	int rc;
-
-	rc = stli_portcmdstats(NULL, portp);
-
-	uart = "UNKNOWN";
-	if (test_bit(BST_STARTED, &brdp->state)) {
-		switch (stli_comstats.hwid) {
-		case 0:	uart = "2681"; break;
-		case 1:	uart = "SC26198"; break;
-		default:uart = "CD1400"; break;
-		}
-	}
-	seq_printf(m, "%d: uart:%s ", portnr, uart);
-
-	if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) {
-		char sep;
-
-		seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
-			(int) stli_comstats.rxtotal);
-
-		if (stli_comstats.rxframing)
-			seq_printf(m, " fe:%d",
-				(int) stli_comstats.rxframing);
-		if (stli_comstats.rxparity)
-			seq_printf(m, " pe:%d",
-				(int) stli_comstats.rxparity);
-		if (stli_comstats.rxbreaks)
-			seq_printf(m, " brk:%d",
-				(int) stli_comstats.rxbreaks);
-		if (stli_comstats.rxoverrun)
-			seq_printf(m, " oe:%d",
-				(int) stli_comstats.rxoverrun);
-
-		sep = ' ';
-		if (stli_comstats.signals & TIOCM_RTS) {
-			seq_printf(m, "%c%s", sep, "RTS");
-			sep = '|';
-		}
-		if (stli_comstats.signals & TIOCM_CTS) {
-			seq_printf(m, "%c%s", sep, "CTS");
-			sep = '|';
-		}
-		if (stli_comstats.signals & TIOCM_DTR) {
-			seq_printf(m, "%c%s", sep, "DTR");
-			sep = '|';
-		}
-		if (stli_comstats.signals & TIOCM_CD) {
-			seq_printf(m, "%c%s", sep, "DCD");
-			sep = '|';
-		}
-		if (stli_comstats.signals & TIOCM_DSR) {
-			seq_printf(m, "%c%s", sep, "DSR");
-			sep = '|';
-		}
-	}
-	seq_putc(m, '\n');
-}
-
-/*****************************************************************************/
-
-/*
- *	Port info, read from the /proc file system.
- */
-
-static int stli_proc_show(struct seq_file *m, void *v)
-{
-	struct stlibrd *brdp;
-	struct stliport *portp;
-	unsigned int brdnr, portnr, totalport;
-
-	totalport = 0;
-
-	seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion);
-
-/*
- *	We scan through for each board, panel and port. The offset is
- *	calculated on the fly, and irrelevant ports are skipped.
- */
-	for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
-		brdp = stli_brds[brdnr];
-		if (brdp == NULL)
-			continue;
-		if (brdp->state == 0)
-			continue;
-
-		totalport = brdnr * STL_MAXPORTS;
-		for (portnr = 0; (portnr < brdp->nrports); portnr++,
-		    totalport++) {
-			portp = brdp->ports[portnr];
-			if (portp == NULL)
-				continue;
-			stli_portinfo(m, brdp, portp, totalport);
-		}
-	}
-	return 0;
-}
-
-static int stli_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, stli_proc_show, NULL);
-}
-
-static const struct file_operations stli_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= stli_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*****************************************************************************/
-
-/*
- *	Generic send command routine. This will send a message to the slave,
- *	of the specified type with the specified argument. Must be very
- *	careful of data that will be copied out from shared memory -
- *	containing command results. The command completion is all done from
- *	a poll routine that does not have user context. Therefore you cannot
- *	copy back directly into user space, or to the kernel stack of a
- *	process. This routine does not sleep, so can be called from anywhere.
- *
- *	The caller must hold the brd_lock (see also stli_sendcmd the usual
- *	entry point)
- */
-
-static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
-	cdkhdr_t __iomem *hdrp;
-	cdkctrl_t __iomem *cp;
-	unsigned char __iomem *bits;
-
-	if (test_bit(ST_CMDING, &portp->state)) {
-		printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
-				(int) cmd);
-		return;
-	}
-
-	EBRDENABLE(brdp);
-	cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
-	if (size > 0) {
-		memcpy_toio((void __iomem *) &(cp->args[0]), arg, size);
-		if (copyback) {
-			portp->argp = arg;
-			portp->argsize = size;
-		}
-	}
-	writel(0, &cp->status);
-	writel(cmd, &cp->cmd);
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
-		portp->portidx;
-	writeb(readb(bits) | portp->portbit, bits);
-	set_bit(ST_CMDING, &portp->state);
-	EBRDDISABLE(brdp);
-}
-
-static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
-	unsigned long		flags;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	__stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Read data from shared memory. This assumes that the shared memory
- *	is enabled and that interrupts are off. Basically we just empty out
- *	the shared memory buffer into the tty buffer. Must be careful to
- *	handle the case where we fill up the tty buffer, but still have
- *	more chars to unload.
- */
-
-static void stli_read(struct stlibrd *brdp, struct stliport *portp)
-{
-	cdkasyrq_t __iomem *rp;
-	char __iomem *shbuf;
-	struct tty_struct	*tty;
-	unsigned int head, tail, size;
-	unsigned int len, stlen;
-
-	if (test_bit(ST_RXSTOP, &portp->state))
-		return;
-	tty = tty_port_tty_get(&portp->port);
-	if (tty == NULL)
-		return;
-
-	rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
-	head = (unsigned int) readw(&rp->head);
-	if (head != ((unsigned int) readw(&rp->head)))
-		head = (unsigned int) readw(&rp->head);
-	tail = (unsigned int) readw(&rp->tail);
-	size = portp->rxsize;
-	if (head >= tail) {
-		len = head - tail;
-		stlen = len;
-	} else {
-		len = size - (tail - head);
-		stlen = size - tail;
-	}
-
-	len = tty_buffer_request_room(tty, len);
-
-	shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->rxoffset);
-
-	while (len > 0) {
-		unsigned char *cptr;
-
-		stlen = min(len, stlen);
-		tty_prepare_flip_string(tty, &cptr, stlen);
-		memcpy_fromio(cptr, shbuf + tail, stlen);
-		len -= stlen;
-		tail += stlen;
-		if (tail >= size) {
-			tail = 0;
-			stlen = head;
-		}
-	}
-	rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
-	writew(tail, &rp->tail);
-
-	if (head != tail)
-		set_bit(ST_RXING, &portp->state);
-
-	tty_schedule_flip(tty);
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- *	Set up and carry out any delayed commands. There is only a small set
- *	of slave commands that can be done "off-level". So it is not too
- *	difficult to deal with them here.
- */
-
-static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp)
-{
-	int cmd;
-
-	if (test_bit(ST_DOSIGS, &portp->state)) {
-		if (test_bit(ST_DOFLUSHTX, &portp->state) &&
-		    test_bit(ST_DOFLUSHRX, &portp->state))
-			cmd = A_SETSIGNALSF;
-		else if (test_bit(ST_DOFLUSHTX, &portp->state))
-			cmd = A_SETSIGNALSFTX;
-		else if (test_bit(ST_DOFLUSHRX, &portp->state))
-			cmd = A_SETSIGNALSFRX;
-		else
-			cmd = A_SETSIGNALS;
-		clear_bit(ST_DOFLUSHTX, &portp->state);
-		clear_bit(ST_DOFLUSHRX, &portp->state);
-		clear_bit(ST_DOSIGS, &portp->state);
-		memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &portp->asig,
-			sizeof(asysigs_t));
-		writel(0, &cp->status);
-		writel(cmd, &cp->cmd);
-		set_bit(ST_CMDING, &portp->state);
-	} else if (test_bit(ST_DOFLUSHTX, &portp->state) ||
-	    test_bit(ST_DOFLUSHRX, &portp->state)) {
-		cmd = ((test_bit(ST_DOFLUSHTX, &portp->state)) ? FLUSHTX : 0);
-		cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0);
-		clear_bit(ST_DOFLUSHTX, &portp->state);
-		clear_bit(ST_DOFLUSHRX, &portp->state);
-		memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &cmd, sizeof(int));
-		writel(0, &cp->status);
-		writel(A_FLUSH, &cp->cmd);
-		set_bit(ST_CMDING, &portp->state);
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Host command service checking. This handles commands or messages
- *	coming from the slave to the host. Must have board shared memory
- *	enabled and interrupts off when called. Notice that by servicing the
- *	read data last we don't need to change the shared memory pointer
- *	during processing (which is a slow IO operation).
- *	Return value indicates if this port is still awaiting actions from
- *	the slave (like open, command, or even TX data being sent). If 0
- *	then port is still busy, otherwise no longer busy.
- */
-
-static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
-{
-	cdkasy_t __iomem *ap;
-	cdkctrl_t __iomem *cp;
-	struct tty_struct *tty;
-	asynotify_t nt;
-	unsigned long oldsigs;
-	int rc, donerx;
-
-	ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-	cp = &ap->ctrl;
-
-/*
- *	Check if we are waiting for an open completion message.
- */
-	if (test_bit(ST_OPENING, &portp->state)) {
-		rc = readl(&cp->openarg);
-		if (readb(&cp->open) == 0 && rc != 0) {
-			if (rc > 0)
-				rc--;
-			writel(0, &cp->openarg);
-			portp->rc = rc;
-			clear_bit(ST_OPENING, &portp->state);
-			wake_up_interruptible(&portp->raw_wait);
-		}
-	}
-
-/*
- *	Check if we are waiting for a close completion message.
- */
-	if (test_bit(ST_CLOSING, &portp->state)) {
-		rc = (int) readl(&cp->closearg);
-		if (readb(&cp->close) == 0 && rc != 0) {
-			if (rc > 0)
-				rc--;
-			writel(0, &cp->closearg);
-			portp->rc = rc;
-			clear_bit(ST_CLOSING, &portp->state);
-			wake_up_interruptible(&portp->raw_wait);
-		}
-	}
-
-/*
- *	Check if we are waiting for a command completion message. We may
- *	need to copy out the command results associated with this command.
- */
-	if (test_bit(ST_CMDING, &portp->state)) {
-		rc = readl(&cp->status);
-		if (readl(&cp->cmd) == 0 && rc != 0) {
-			if (rc > 0)
-				rc--;
-			if (portp->argp != NULL) {
-				memcpy_fromio(portp->argp, (void __iomem *) &(cp->args[0]),
-					portp->argsize);
-				portp->argp = NULL;
-			}
-			writel(0, &cp->status);
-			portp->rc = rc;
-			clear_bit(ST_CMDING, &portp->state);
-			stli_dodelaycmd(portp, cp);
-			wake_up_interruptible(&portp->raw_wait);
-		}
-	}
-
-/*
- *	Check for any notification messages ready. This includes lots of
- *	different types of events - RX chars ready, RX break received,
- *	TX data low or empty in the slave, modem signals changed state.
- */
-	donerx = 0;
-
-	if (ap->notify) {
-		nt = ap->changed;
-		ap->notify = 0;
-		tty = tty_port_tty_get(&portp->port);
-
-		if (nt.signal & SG_DCD) {
-			oldsigs = portp->sigs;
-			portp->sigs = stli_mktiocm(nt.sigvalue);
-			clear_bit(ST_GETSIGS, &portp->state);
-			if ((portp->sigs & TIOCM_CD) &&
-			    ((oldsigs & TIOCM_CD) == 0))
-				wake_up_interruptible(&portp->port.open_wait);
-			if ((oldsigs & TIOCM_CD) &&
-			    ((portp->sigs & TIOCM_CD) == 0)) {
-				if (portp->port.flags & ASYNC_CHECK_CD) {
-					if (tty)
-						tty_hangup(tty);
-				}
-			}
-		}
-
-		if (nt.data & DT_TXEMPTY)
-			clear_bit(ST_TXBUSY, &portp->state);
-		if (nt.data & (DT_TXEMPTY | DT_TXLOW)) {
-			if (tty != NULL) {
-				tty_wakeup(tty);
-				EBRDENABLE(brdp);
-			}
-		}
-
-		if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
-			if (tty != NULL) {
-				tty_insert_flip_char(tty, 0, TTY_BREAK);
-				if (portp->port.flags & ASYNC_SAK) {
-					do_SAK(tty);
-					EBRDENABLE(brdp);
-				}
-				tty_schedule_flip(tty);
-			}
-		}
-		tty_kref_put(tty);
-
-		if (nt.data & DT_RXBUSY) {
-			donerx++;
-			stli_read(brdp, portp);
-		}
-	}
-
-/*
- *	It might seem odd that we are checking for more RX chars here.
- *	But, we need to handle the case where the tty buffer was previously
- *	filled, but we had more characters to pass up. The slave will not
- *	send any more RX notify messages until the RX buffer has been emptied.
- *	But it will leave the service bits on (since the buffer is not empty).
- *	So from here we can try to process more RX chars.
- */
-	if ((!donerx) && test_bit(ST_RXING, &portp->state)) {
-		clear_bit(ST_RXING, &portp->state);
-		stli_read(brdp, portp);
-	}
-
-	return((test_bit(ST_OPENING, &portp->state) ||
-		test_bit(ST_CLOSING, &portp->state) ||
-		test_bit(ST_CMDING, &portp->state) ||
-		test_bit(ST_TXBUSY, &portp->state) ||
-		test_bit(ST_RXING, &portp->state)) ? 0 : 1);
-}
-
-/*****************************************************************************/
-
-/*
- *	Service all ports on a particular board. Assumes that the boards
- *	shared memory is enabled, and that the page pointer is pointed
- *	at the cdk header structure.
- */
-
-static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp)
-{
-	struct stliport *portp;
-	unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
-	unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
-	unsigned char __iomem *slavep;
-	int bitpos, bitat, bitsize;
-	int channr, nrdevs, slavebitchange;
-
-	bitsize = brdp->bitsize;
-	nrdevs = brdp->nrdevs;
-
-/*
- *	Check if slave wants any service. Basically we try to do as
- *	little work as possible here. There are 2 levels of service
- *	bits. So if there is nothing to do we bail early. We check
- *	8 service bits at a time in the inner loop, so we can bypass
- *	the lot if none of them want service.
- */
-	memcpy_fromio(&hostbits[0], (((unsigned char __iomem *) hdrp) + brdp->hostoffset),
-		bitsize);
-
-	memset(&slavebits[0], 0, bitsize);
-	slavebitchange = 0;
-
-	for (bitpos = 0; (bitpos < bitsize); bitpos++) {
-		if (hostbits[bitpos] == 0)
-			continue;
-		channr = bitpos * 8;
-		for (bitat = 0x1; (channr < nrdevs); channr++, bitat <<= 1) {
-			if (hostbits[bitpos] & bitat) {
-				portp = brdp->ports[(channr - 1)];
-				if (stli_hostcmd(brdp, portp)) {
-					slavebitchange++;
-					slavebits[bitpos] |= bitat;
-				}
-			}
-		}
-	}
-
-/*
- *	If any of the ports are no longer busy then update them in the
- *	slave request bits. We need to do this after, since a host port
- *	service may initiate more slave requests.
- */
-	if (slavebitchange) {
-		hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-		slavep = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset;
-		for (bitpos = 0; (bitpos < bitsize); bitpos++) {
-			if (readb(slavebits + bitpos))
-				writeb(readb(slavep + bitpos) & ~slavebits[bitpos], slavebits + bitpos);
-		}
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Driver poll routine. This routine polls the boards in use and passes
- *	messages back up to host when necessary. This is actually very
- *	CPU efficient, since we will always have the kernel poll clock, it
- *	adds only a few cycles when idle (since board service can be
- *	determined very easily), but when loaded generates no interrupts
- *	(with their expensive associated context change).
- */
-
-static void stli_poll(unsigned long arg)
-{
-	cdkhdr_t __iomem *hdrp;
-	struct stlibrd *brdp;
-	unsigned int brdnr;
-
-	mod_timer(&stli_timerlist, STLI_TIMEOUT);
-
-/*
- *	Check each board and do any servicing required.
- */
-	for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
-		brdp = stli_brds[brdnr];
-		if (brdp == NULL)
-			continue;
-		if (!test_bit(BST_STARTED, &brdp->state))
-			continue;
-
-		spin_lock(&brd_lock);
-		EBRDENABLE(brdp);
-		hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-		if (readb(&hdrp->hostreq))
-			stli_brdpoll(brdp, hdrp);
-		EBRDDISABLE(brdp);
-		spin_unlock(&brd_lock);
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Translate the termios settings into the port setting structure of
- *	the slave.
- */
-
-static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp,
-				asyport_t *pp, struct ktermios *tiosp)
-{
-	memset(pp, 0, sizeof(asyport_t));
-
-/*
- *	Start of by setting the baud, char size, parity and stop bit info.
- */
-	pp->baudout = tty_get_baud_rate(tty);
-	if ((tiosp->c_cflag & CBAUD) == B38400) {
-		if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			pp->baudout = 57600;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			pp->baudout = 115200;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			pp->baudout = 230400;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			pp->baudout = 460800;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
-			pp->baudout = (portp->baud_base / portp->custom_divisor);
-	}
-	if (pp->baudout > STL_MAXBAUD)
-		pp->baudout = STL_MAXBAUD;
-	pp->baudin = pp->baudout;
-
-	switch (tiosp->c_cflag & CSIZE) {
-	case CS5:
-		pp->csize = 5;
-		break;
-	case CS6:
-		pp->csize = 6;
-		break;
-	case CS7:
-		pp->csize = 7;
-		break;
-	default:
-		pp->csize = 8;
-		break;
-	}
-
-	if (tiosp->c_cflag & CSTOPB)
-		pp->stopbs = PT_STOP2;
-	else
-		pp->stopbs = PT_STOP1;
-
-	if (tiosp->c_cflag & PARENB) {
-		if (tiosp->c_cflag & PARODD)
-			pp->parity = PT_ODDPARITY;
-		else
-			pp->parity = PT_EVENPARITY;
-	} else {
-		pp->parity = PT_NOPARITY;
-	}
-
-/*
- *	Set up any flow control options enabled.
- */
-	if (tiosp->c_iflag & IXON) {
-		pp->flow |= F_IXON;
-		if (tiosp->c_iflag & IXANY)
-			pp->flow |= F_IXANY;
-	}
-	if (tiosp->c_cflag & CRTSCTS)
-		pp->flow |= (F_RTSFLOW | F_CTSFLOW);
-
-	pp->startin = tiosp->c_cc[VSTART];
-	pp->stopin = tiosp->c_cc[VSTOP];
-	pp->startout = tiosp->c_cc[VSTART];
-	pp->stopout = tiosp->c_cc[VSTOP];
-
-/*
- *	Set up the RX char marking mask with those RX error types we must
- *	catch. We can get the slave to help us out a little here, it will
- *	ignore parity errors and breaks for us, and mark parity errors in
- *	the data stream.
- */
-	if (tiosp->c_iflag & IGNPAR)
-		pp->iflag |= FI_IGNRXERRS;
-	if (tiosp->c_iflag & IGNBRK)
-		pp->iflag |= FI_IGNBREAK;
-
-	portp->rxmarkmsk = 0;
-	if (tiosp->c_iflag & (INPCK | PARMRK))
-		pp->iflag |= FI_1MARKRXERRS;
-	if (tiosp->c_iflag & BRKINT)
-		portp->rxmarkmsk |= BRKINT;
-
-/*
- *	Set up clocal processing as required.
- */
-	if (tiosp->c_cflag & CLOCAL)
-		portp->port.flags &= ~ASYNC_CHECK_CD;
-	else
-		portp->port.flags |= ASYNC_CHECK_CD;
-
-/*
- *	Transfer any persistent flags into the asyport structure.
- */
-	pp->pflag = (portp->pflag & 0xffff);
-	pp->vmin = (portp->pflag & P_RXIMIN) ? 1 : 0;
-	pp->vtime = (portp->pflag & P_RXITIME) ? 1 : 0;
-	pp->cc[1] = (portp->pflag & P_RXTHOLD) ? 1 : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Construct a slave signals structure for setting the DTR and RTS
- *	signals as specified.
- */
-
-static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts)
-{
-	memset(sp, 0, sizeof(asysigs_t));
-	if (dtr >= 0) {
-		sp->signal |= SG_DTR;
-		sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0);
-	}
-	if (rts >= 0) {
-		sp->signal |= SG_RTS;
-		sp->sigvalue |= ((rts > 0) ? SG_RTS : 0);
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Convert the signals returned from the slave into a local TIOCM type
- *	signals value. We keep them locally in TIOCM format.
- */
-
-static long stli_mktiocm(unsigned long sigvalue)
-{
-	long	tiocm = 0;
-	tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0);
-	tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0);
-	tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0);
-	tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0);
-	tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0);
-	tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0);
-	return(tiocm);
-}
-
-/*****************************************************************************/
-
-/*
- *	All panels and ports actually attached have been worked out. All
- *	we need to do here is set up the appropriate per port data structures.
- */
-
-static int stli_initports(struct stlibrd *brdp)
-{
-	struct stliport	*portp;
-	unsigned int i, panelnr, panelport;
-
-	for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
-		portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
-		if (!portp) {
-			printk(KERN_WARNING "istallion: failed to allocate port structure\n");
-			continue;
-		}
-		tty_port_init(&portp->port);
-		portp->port.ops = &stli_port_ops;
-		portp->magic = STLI_PORTMAGIC;
-		portp->portnr = i;
-		portp->brdnr = brdp->brdnr;
-		portp->panelnr = panelnr;
-		portp->baud_base = STL_BAUDBASE;
-		portp->port.close_delay = STL_CLOSEDELAY;
-		portp->closing_wait = 30 * HZ;
-		init_waitqueue_head(&portp->port.open_wait);
-		init_waitqueue_head(&portp->port.close_wait);
-		init_waitqueue_head(&portp->raw_wait);
-		panelport++;
-		if (panelport >= brdp->panels[panelnr]) {
-			panelport = 0;
-			panelnr++;
-		}
-		brdp->ports[i] = portp;
-	}
-
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	All the following routines are board specific hardware operations.
- */
-
-static void stli_ecpinit(struct stlibrd *brdp)
-{
-	unsigned long	memconf;
-
-	outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
-	udelay(10);
-	outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
-	udelay(100);
-
-	memconf = (brdp->memaddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT;
-	outb(memconf, (brdp->iobase + ECP_ATMEMAR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpenable(struct stlibrd *brdp)
-{	
-	outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpdisable(struct stlibrd *brdp)
-{	
-	outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char val;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), brd=%d\n",
-			(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-		val = 0;
-	} else {
-		ptr = brdp->membase + (offset % ECP_ATPAGESIZE);
-		val = (unsigned char) (offset / ECP_ATPAGESIZE);
-	}
-	outb(val, (brdp->iobase + ECP_ATMEMPR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpreset(struct stlibrd *brdp)
-{	
-	outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
-	udelay(10);
-	outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
-	udelay(500);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpintr(struct stlibrd *brdp)
-{	
-	outb(0x1, brdp->iobase);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following set of functions act on ECP EISA boards.
- */
-
-static void stli_ecpeiinit(struct stlibrd *brdp)
-{
-	unsigned long	memconf;
-
-	outb(0x1, (brdp->iobase + ECP_EIBRDENAB));
-	outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
-	udelay(10);
-	outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
-	udelay(500);
-
-	memconf = (brdp->memaddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL;
-	outb(memconf, (brdp->iobase + ECP_EIMEMARL));
-	memconf = (brdp->memaddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH;
-	outb(memconf, (brdp->iobase + ECP_EIMEMARH));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeienable(struct stlibrd *brdp)
-{	
-	outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeidisable(struct stlibrd *brdp)
-{	
-	outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char	val;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), brd=%d\n",
-			(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-		val = 0;
-	} else {
-		ptr = brdp->membase + (offset % ECP_EIPAGESIZE);
-		if (offset < ECP_EIPAGESIZE)
-			val = ECP_EIENABLE;
-		else
-			val = ECP_EIENABLE | 0x40;
-	}
-	outb(val, (brdp->iobase + ECP_EICONFR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeireset(struct stlibrd *brdp)
-{	
-	outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
-	udelay(10);
-	outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
-	udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following set of functions act on ECP MCA boards.
- */
-
-static void stli_ecpmcenable(struct stlibrd *brdp)
-{	
-	outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpmcdisable(struct stlibrd *brdp)
-{	
-	outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char val;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), brd=%d\n",
-			(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-		val = 0;
-	} else {
-		ptr = brdp->membase + (offset % ECP_MCPAGESIZE);
-		val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE;
-	}
-	outb(val, (brdp->iobase + ECP_MCCONFR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpmcreset(struct stlibrd *brdp)
-{	
-	outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR));
-	udelay(10);
-	outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
-	udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following set of functions act on ECP PCI boards.
- */
-
-static void stli_ecppciinit(struct stlibrd *brdp)
-{
-	outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
-	udelay(10);
-	outb(0, (brdp->iobase + ECP_PCICONFR));
-	udelay(500);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char	val;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), board=%d\n",
-				(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-		val = 0;
-	} else {
-		ptr = brdp->membase + (offset % ECP_PCIPAGESIZE);
-		val = (offset / ECP_PCIPAGESIZE) << 1;
-	}
-	outb(val, (brdp->iobase + ECP_PCICONFR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecppcireset(struct stlibrd *brdp)
-{	
-	outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
-	udelay(10);
-	outb(0, (brdp->iobase + ECP_PCICONFR));
-	udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following routines act on ONboards.
- */
-
-static void stli_onbinit(struct stlibrd *brdp)
-{
-	unsigned long	memconf;
-
-	outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
-	udelay(10);
-	outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
-	mdelay(1000);
-
-	memconf = (brdp->memaddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT;
-	outb(memconf, (brdp->iobase + ONB_ATMEMAR));
-	outb(0x1, brdp->iobase);
-	mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void stli_onbenable(struct stlibrd *brdp)
-{	
-	outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_onbdisable(struct stlibrd *brdp)
-{	
-	outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), brd=%d\n",
-				(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-	} else {
-		ptr = brdp->membase + (offset % ONB_ATPAGESIZE);
-	}
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_onbreset(struct stlibrd *brdp)
-{	
-	outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
-	udelay(10);
-	outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
-	mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following routines act on ONboard EISA.
- */
-
-static void stli_onbeinit(struct stlibrd *brdp)
-{
-	unsigned long	memconf;
-
-	outb(0x1, (brdp->iobase + ONB_EIBRDENAB));
-	outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
-	udelay(10);
-	outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
-	mdelay(1000);
-
-	memconf = (brdp->memaddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL;
-	outb(memconf, (brdp->iobase + ONB_EIMEMARL));
-	memconf = (brdp->memaddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH;
-	outb(memconf, (brdp->iobase + ONB_EIMEMARH));
-	outb(0x1, brdp->iobase);
-	mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void stli_onbeenable(struct stlibrd *brdp)
-{	
-	outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_onbedisable(struct stlibrd *brdp)
-{	
-	outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char val;
-
-	if (offset > brdp->memsize) {
-		printk(KERN_ERR "istallion: shared memory pointer=%x out of "
-				"range at line=%d(%d), brd=%d\n",
-			(int) offset, line, __LINE__, brdp->brdnr);
-		ptr = NULL;
-		val = 0;
-	} else {
-		ptr = brdp->membase + (offset % ONB_EIPAGESIZE);
-		if (offset < ONB_EIPAGESIZE)
-			val = ONB_EIENABLE;
-		else
-			val = ONB_EIENABLE | 0x40;
-	}
-	outb(val, (brdp->iobase + ONB_EICONFR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_onbereset(struct stlibrd *brdp)
-{	
-	outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
-	udelay(10);
-	outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
-	mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following routines act on Brumby boards.
- */
-
-static void stli_bbyinit(struct stlibrd *brdp)
-{
-	outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
-	udelay(10);
-	outb(0, (brdp->iobase + BBY_ATCONFR));
-	mdelay(1000);
-	outb(0x1, brdp->iobase);
-	mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	void __iomem *ptr;
-	unsigned char val;
-
-	BUG_ON(offset > brdp->memsize);
-
-	ptr = brdp->membase + (offset % BBY_PAGESIZE);
-	val = (unsigned char) (offset / BBY_PAGESIZE);
-	outb(val, (brdp->iobase + BBY_ATCONFR));
-	return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_bbyreset(struct stlibrd *brdp)
-{	
-	outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
-	udelay(10);
-	outb(0, (brdp->iobase + BBY_ATCONFR));
-	mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- *	The following routines act on original old Stallion boards.
- */
-
-static void stli_stalinit(struct stlibrd *brdp)
-{
-	outb(0x1, brdp->iobase);
-	mdelay(1000);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{	
-	BUG_ON(offset > brdp->memsize);
-	return brdp->membase + (offset % STAL_PAGESIZE);
-}
-
-/*****************************************************************************/
-
-static void stli_stalreset(struct stlibrd *brdp)
-{	
-	u32 __iomem *vecp;
-
-	vecp = (u32 __iomem *) (brdp->membase + 0x30);
-	writel(0xffff0000, vecp);
-	outb(0, brdp->iobase);
-	mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- *	Try to find an ECP board and initialize it. This handles only ECP
- *	board types.
- */
-
-static int stli_initecp(struct stlibrd *brdp)
-{
-	cdkecpsig_t sig;
-	cdkecpsig_t __iomem *sigsp;
-	unsigned int status, nxtid;
-	char *name;
-	int retval, panelnr, nrports;
-
-	if ((brdp->iobase == 0) || (brdp->memaddr == 0)) {
-		retval = -ENODEV;
-		goto err;
-	}
-
-	brdp->iosize = ECP_IOSIZE;
-
-	if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
-		retval = -EIO;
-		goto err;
-	}
-
-/*
- *	Based on the specific board type setup the common vars to access
- *	and enable shared memory. Set all board specific information now
- *	as well.
- */
-	switch (brdp->brdtype) {
-	case BRD_ECP:
-		brdp->memsize = ECP_MEMSIZE;
-		brdp->pagesize = ECP_ATPAGESIZE;
-		brdp->init = stli_ecpinit;
-		brdp->enable = stli_ecpenable;
-		brdp->reenable = stli_ecpenable;
-		brdp->disable = stli_ecpdisable;
-		brdp->getmemptr = stli_ecpgetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_ecpreset;
-		name = "serial(EC8/64)";
-		break;
-
-	case BRD_ECPE:
-		brdp->memsize = ECP_MEMSIZE;
-		brdp->pagesize = ECP_EIPAGESIZE;
-		brdp->init = stli_ecpeiinit;
-		brdp->enable = stli_ecpeienable;
-		brdp->reenable = stli_ecpeienable;
-		brdp->disable = stli_ecpeidisable;
-		brdp->getmemptr = stli_ecpeigetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_ecpeireset;
-		name = "serial(EC8/64-EI)";
-		break;
-
-	case BRD_ECPMC:
-		brdp->memsize = ECP_MEMSIZE;
-		brdp->pagesize = ECP_MCPAGESIZE;
-		brdp->init = NULL;
-		brdp->enable = stli_ecpmcenable;
-		brdp->reenable = stli_ecpmcenable;
-		brdp->disable = stli_ecpmcdisable;
-		brdp->getmemptr = stli_ecpmcgetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_ecpmcreset;
-		name = "serial(EC8/64-MCA)";
-		break;
-
-	case BRD_ECPPCI:
-		brdp->memsize = ECP_PCIMEMSIZE;
-		brdp->pagesize = ECP_PCIPAGESIZE;
-		brdp->init = stli_ecppciinit;
-		brdp->enable = NULL;
-		brdp->reenable = NULL;
-		brdp->disable = NULL;
-		brdp->getmemptr = stli_ecppcigetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_ecppcireset;
-		name = "serial(EC/RA-PCI)";
-		break;
-
-	default:
-		retval = -EINVAL;
-		goto err_reg;
-	}
-
-/*
- *	The per-board operations structure is all set up, so now let's go
- *	and get the board operational. Firstly initialize board configuration
- *	registers. Set the memory mapping info so we can get at the boards
- *	shared memory.
- */
-	EBRDINIT(brdp);
-
-	brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
-	if (brdp->membase == NULL) {
-		retval = -ENOMEM;
-		goto err_reg;
-	}
-
-/*
- *	Now that all specific code is set up, enable the shared memory and
- *	look for the a signature area that will tell us exactly what board
- *	this is, and what it is connected to it.
- */
-	EBRDENABLE(brdp);
-	sigsp = (cdkecpsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
-	memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t));
-	EBRDDISABLE(brdp);
-
-	if (sig.magic != cpu_to_le32(ECP_MAGIC)) {
-		retval = -ENODEV;
-		goto err_unmap;
-	}
-
-/*
- *	Scan through the signature looking at the panels connected to the
- *	board. Calculate the total number of ports as we go.
- */
-	for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) {
-		status = sig.panelid[nxtid];
-		if ((status & ECH_PNLIDMASK) != nxtid)
-			break;
-
-		brdp->panelids[panelnr] = status;
-		nrports = (status & ECH_PNL16PORT) ? 16 : 8;
-		if ((nrports == 16) && ((status & ECH_PNLXPID) == 0))
-			nxtid++;
-		brdp->panels[panelnr] = nrports;
-		brdp->nrports += nrports;
-		nxtid++;
-		brdp->nrpanels++;
-	}
-
-
-	set_bit(BST_FOUND, &brdp->state);
-	return 0;
-err_unmap:
-	iounmap(brdp->membase);
-	brdp->membase = NULL;
-err_reg:
-	release_region(brdp->iobase, brdp->iosize);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Try to find an ONboard, Brumby or Stallion board and initialize it.
- *	This handles only these board types.
- */
-
-static int stli_initonb(struct stlibrd *brdp)
-{
-	cdkonbsig_t sig;
-	cdkonbsig_t __iomem *sigsp;
-	char *name;
-	int i, retval;
-
-/*
- *	Do a basic sanity check on the IO and memory addresses.
- */
-	if (brdp->iobase == 0 || brdp->memaddr == 0) {
-		retval = -ENODEV;
-		goto err;
-	}
-
-	brdp->iosize = ONB_IOSIZE;
-	
-	if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
-		retval = -EIO;
-		goto err;
-	}
-
-/*
- *	Based on the specific board type setup the common vars to access
- *	and enable shared memory. Set all board specific information now
- *	as well.
- */
-	switch (brdp->brdtype) {
-	case BRD_ONBOARD:
-	case BRD_ONBOARD2:
-		brdp->memsize = ONB_MEMSIZE;
-		brdp->pagesize = ONB_ATPAGESIZE;
-		brdp->init = stli_onbinit;
-		brdp->enable = stli_onbenable;
-		brdp->reenable = stli_onbenable;
-		brdp->disable = stli_onbdisable;
-		brdp->getmemptr = stli_onbgetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_onbreset;
-		if (brdp->memaddr > 0x100000)
-			brdp->enabval = ONB_MEMENABHI;
-		else
-			brdp->enabval = ONB_MEMENABLO;
-		name = "serial(ONBoard)";
-		break;
-
-	case BRD_ONBOARDE:
-		brdp->memsize = ONB_EIMEMSIZE;
-		brdp->pagesize = ONB_EIPAGESIZE;
-		brdp->init = stli_onbeinit;
-		brdp->enable = stli_onbeenable;
-		brdp->reenable = stli_onbeenable;
-		brdp->disable = stli_onbedisable;
-		brdp->getmemptr = stli_onbegetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_onbereset;
-		name = "serial(ONBoard/E)";
-		break;
-
-	case BRD_BRUMBY4:
-		brdp->memsize = BBY_MEMSIZE;
-		brdp->pagesize = BBY_PAGESIZE;
-		brdp->init = stli_bbyinit;
-		brdp->enable = NULL;
-		brdp->reenable = NULL;
-		brdp->disable = NULL;
-		brdp->getmemptr = stli_bbygetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_bbyreset;
-		name = "serial(Brumby)";
-		break;
-
-	case BRD_STALLION:
-		brdp->memsize = STAL_MEMSIZE;
-		brdp->pagesize = STAL_PAGESIZE;
-		brdp->init = stli_stalinit;
-		brdp->enable = NULL;
-		brdp->reenable = NULL;
-		brdp->disable = NULL;
-		brdp->getmemptr = stli_stalgetmemptr;
-		brdp->intr = stli_ecpintr;
-		brdp->reset = stli_stalreset;
-		name = "serial(Stallion)";
-		break;
-
-	default:
-		retval = -EINVAL;
-		goto err_reg;
-	}
-
-/*
- *	The per-board operations structure is all set up, so now let's go
- *	and get the board operational. Firstly initialize board configuration
- *	registers. Set the memory mapping info so we can get at the boards
- *	shared memory.
- */
-	EBRDINIT(brdp);
-
-	brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
-	if (brdp->membase == NULL) {
-		retval = -ENOMEM;
-		goto err_reg;
-	}
-
-/*
- *	Now that all specific code is set up, enable the shared memory and
- *	look for the a signature area that will tell us exactly what board
- *	this is, and how many ports.
- */
-	EBRDENABLE(brdp);
-	sigsp = (cdkonbsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
-	memcpy_fromio(&sig, sigsp, sizeof(cdkonbsig_t));
-	EBRDDISABLE(brdp);
-
-	if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) ||
-	    sig.magic1 != cpu_to_le16(ONB_MAGIC1) ||
-	    sig.magic2 != cpu_to_le16(ONB_MAGIC2) ||
-	    sig.magic3 != cpu_to_le16(ONB_MAGIC3)) {
-		retval = -ENODEV;
-		goto err_unmap;
-	}
-
-/*
- *	Scan through the signature alive mask and calculate how many ports
- *	there are on this board.
- */
-	brdp->nrpanels = 1;
-	if (sig.amask1) {
-		brdp->nrports = 32;
-	} else {
-		for (i = 0; (i < 16); i++) {
-			if (((sig.amask0 << i) & 0x8000) == 0)
-				break;
-		}
-		brdp->nrports = i;
-	}
-	brdp->panels[0] = brdp->nrports;
-
-
-	set_bit(BST_FOUND, &brdp->state);
-	return 0;
-err_unmap:
-	iounmap(brdp->membase);
-	brdp->membase = NULL;
-err_reg:
-	release_region(brdp->iobase, brdp->iosize);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Start up a running board. This routine is only called after the
- *	code has been down loaded to the board and is operational. It will
- *	read in the memory map, and get the show on the road...
- */
-
-static int stli_startbrd(struct stlibrd *brdp)
-{
-	cdkhdr_t __iomem *hdrp;
-	cdkmem_t __iomem *memp;
-	cdkasy_t __iomem *ap;
-	unsigned long flags;
-	unsigned int portnr, nrdevs, i;
-	struct stliport *portp;
-	int rc = 0;
-	u32 memoff;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	EBRDENABLE(brdp);
-	hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
-	nrdevs = hdrp->nrdevs;
-
-#if 0
-	printk("%s(%d): CDK version %d.%d.%d --> "
-		"nrdevs=%d memp=%x hostp=%x slavep=%x\n",
-		 __FILE__, __LINE__, readb(&hdrp->ver_release), readb(&hdrp->ver_modification),
-		 readb(&hdrp->ver_fix), nrdevs, (int) readl(&hdrp->memp), readl(&hdrp->hostp),
-		 readl(&hdrp->slavep));
-#endif
-
-	if (nrdevs < (brdp->nrports + 1)) {
-		printk(KERN_ERR "istallion: slave failed to allocate memory for "
-				"all devices, devices=%d\n", nrdevs);
-		brdp->nrports = nrdevs - 1;
-	}
-	brdp->nrdevs = nrdevs;
-	brdp->hostoffset = hdrp->hostp - CDK_CDKADDR;
-	brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR;
-	brdp->bitsize = (nrdevs + 7) / 8;
-	memoff = readl(&hdrp->memp);
-	if (memoff > brdp->memsize) {
-		printk(KERN_ERR "istallion: corrupted shared memory region?\n");
-		rc = -EIO;
-		goto stli_donestartup;
-	}
-	memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
-	if (readw(&memp->dtype) != TYP_ASYNCTRL) {
-		printk(KERN_ERR "istallion: no slave control device found\n");
-		goto stli_donestartup;
-	}
-	memp++;
-
-/*
- *	Cycle through memory allocation of each port. We are guaranteed to
- *	have all ports inside the first page of slave window, so no need to
- *	change pages while reading memory map.
- */
-	for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) {
-		if (readw(&memp->dtype) != TYP_ASYNC)
-			break;
-		portp = brdp->ports[portnr];
-		if (portp == NULL)
-			break;
-		portp->devnr = i;
-		portp->addr = readl(&memp->offset);
-		portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs));
-		portp->portidx = (unsigned char) (i / 8);
-		portp->portbit = (unsigned char) (0x1 << (i % 8));
-	}
-
-	writeb(0xff, &hdrp->slavereq);
-
-/*
- *	For each port setup a local copy of the RX and TX buffer offsets
- *	and sizes. We do this separate from the above, because we need to
- *	move the shared memory page...
- */
-	for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) {
-		portp = brdp->ports[portnr];
-		if (portp == NULL)
-			break;
-		if (portp->addr == 0)
-			break;
-		ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
-		if (ap != NULL) {
-			portp->rxsize = readw(&ap->rxq.size);
-			portp->txsize = readw(&ap->txq.size);
-			portp->rxoffset = readl(&ap->rxq.offset);
-			portp->txoffset = readl(&ap->txq.offset);
-		}
-	}
-
-stli_donestartup:
-	EBRDDISABLE(brdp);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	if (rc == 0)
-		set_bit(BST_STARTED, &brdp->state);
-
-	if (! stli_timeron) {
-		stli_timeron++;
-		mod_timer(&stli_timerlist, STLI_TIMEOUT);
-	}
-
-	return rc;
-}
-
-/*****************************************************************************/
-
-/*
- *	Probe and initialize the specified board.
- */
-
-static int __devinit stli_brdinit(struct stlibrd *brdp)
-{
-	int retval;
-
-	switch (brdp->brdtype) {
-	case BRD_ECP:
-	case BRD_ECPE:
-	case BRD_ECPMC:
-	case BRD_ECPPCI:
-		retval = stli_initecp(brdp);
-		break;
-	case BRD_ONBOARD:
-	case BRD_ONBOARDE:
-	case BRD_ONBOARD2:
-	case BRD_BRUMBY4:
-	case BRD_STALLION:
-		retval = stli_initonb(brdp);
-		break;
-	default:
-		printk(KERN_ERR "istallion: board=%d is unknown board "
-				"type=%d\n", brdp->brdnr, brdp->brdtype);
-		retval = -ENODEV;
-	}
-
-	if (retval)
-		return retval;
-
-	stli_initports(brdp);
-	printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
-		"nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
-		brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
-		brdp->nrpanels, brdp->nrports);
-	return 0;
-}
-
-#if STLI_EISAPROBE != 0
-/*****************************************************************************/
-
-/*
- *	Probe around trying to find where the EISA boards shared memory
- *	might be. This is a bit if hack, but it is the best we can do.
- */
-
-static int stli_eisamemprobe(struct stlibrd *brdp)
-{
-	cdkecpsig_t	ecpsig, __iomem *ecpsigp;
-	cdkonbsig_t	onbsig, __iomem *onbsigp;
-	int		i, foundit;
-
-/*
- *	First up we reset the board, to get it into a known state. There
- *	is only 2 board types here we need to worry about. Don;t use the
- *	standard board init routine here, it programs up the shared
- *	memory address, and we don't know it yet...
- */
-	if (brdp->brdtype == BRD_ECPE) {
-		outb(0x1, (brdp->iobase + ECP_EIBRDENAB));
-		outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
-		udelay(10);
-		outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
-		udelay(500);
-		stli_ecpeienable(brdp);
-	} else if (brdp->brdtype == BRD_ONBOARDE) {
-		outb(0x1, (brdp->iobase + ONB_EIBRDENAB));
-		outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
-		udelay(10);
-		outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
-		mdelay(100);
-		outb(0x1, brdp->iobase);
-		mdelay(1);
-		stli_onbeenable(brdp);
-	} else {
-		return -ENODEV;
-	}
-
-	foundit = 0;
-	brdp->memsize = ECP_MEMSIZE;
-
-/*
- *	Board shared memory is enabled, so now we have a poke around and
- *	see if we can find it.
- */
-	for (i = 0; (i < stli_eisamempsize); i++) {
-		brdp->memaddr = stli_eisamemprobeaddrs[i];
-		brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
-		if (brdp->membase == NULL)
-			continue;
-
-		if (brdp->brdtype == BRD_ECPE) {
-			ecpsigp = stli_ecpeigetmemptr(brdp,
-				CDK_SIGADDR, __LINE__);
-			memcpy_fromio(&ecpsig, ecpsigp, sizeof(cdkecpsig_t));
-			if (ecpsig.magic == cpu_to_le32(ECP_MAGIC))
-				foundit = 1;
-		} else {
-			onbsigp = (cdkonbsig_t __iomem *) stli_onbegetmemptr(brdp,
-				CDK_SIGADDR, __LINE__);
-			memcpy_fromio(&onbsig, onbsigp, sizeof(cdkonbsig_t));
-			if ((onbsig.magic0 == cpu_to_le16(ONB_MAGIC0)) &&
-			    (onbsig.magic1 == cpu_to_le16(ONB_MAGIC1)) &&
-			    (onbsig.magic2 == cpu_to_le16(ONB_MAGIC2)) &&
-			    (onbsig.magic3 == cpu_to_le16(ONB_MAGIC3)))
-				foundit = 1;
-		}
-
-		iounmap(brdp->membase);
-		if (foundit)
-			break;
-	}
-
-/*
- *	Regardless of whether we found the shared memory or not we must
- *	disable the region. After that return success or failure.
- */
-	if (brdp->brdtype == BRD_ECPE)
-		stli_ecpeidisable(brdp);
-	else
-		stli_onbedisable(brdp);
-
-	if (! foundit) {
-		brdp->memaddr = 0;
-		brdp->membase = NULL;
-		printk(KERN_ERR "istallion: failed to probe shared memory "
-				"region for %s in EISA slot=%d\n",
-			stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
-		return -ENODEV;
-	}
-	return 0;
-}
-#endif
-
-static int stli_getbrdnr(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < STL_MAXBRDS; i++) {
-		if (!stli_brds[i]) {
-			if (i >= stli_nrbrds)
-				stli_nrbrds = i + 1;
-			return i;
-		}
-	}
-	return -1;
-}
-
-#if STLI_EISAPROBE != 0
-/*****************************************************************************/
-
-/*
- *	Probe around and try to find any EISA boards in system. The biggest
- *	problem here is finding out what memory address is associated with
- *	an EISA board after it is found. The registers of the ECPE and
- *	ONboardE are not readable - so we can't read them from there. We
- *	don't have access to the EISA CMOS (or EISA BIOS) so we don't
- *	actually have any way to find out the real value. The best we can
- *	do is go probing around in the usual places hoping we can find it.
- */
-
-static int __init stli_findeisabrds(void)
-{
-	struct stlibrd *brdp;
-	unsigned int iobase, eid, i;
-	int brdnr, found = 0;
-
-/*
- *	Firstly check if this is an EISA system.  If this is not an EISA system then
- *	don't bother going any further!
- */
-	if (EISA_bus)
-		return 0;
-
-/*
- *	Looks like an EISA system, so go searching for EISA boards.
- */
-	for (iobase = 0x1000; (iobase <= 0xc000); iobase += 0x1000) {
-		outb(0xff, (iobase + 0xc80));
-		eid = inb(iobase + 0xc80);
-		eid |= inb(iobase + 0xc81) << 8;
-		if (eid != STL_EISAID)
-			continue;
-
-/*
- *		We have found a board. Need to check if this board was
- *		statically configured already (just in case!).
- */
-		for (i = 0; (i < STL_MAXBRDS); i++) {
-			brdp = stli_brds[i];
-			if (brdp == NULL)
-				continue;
-			if (brdp->iobase == iobase)
-				break;
-		}
-		if (i < STL_MAXBRDS)
-			continue;
-
-/*
- *		We have found a Stallion board and it is not configured already.
- *		Allocate a board structure and initialize it.
- */
-		if ((brdp = stli_allocbrd()) == NULL)
-			return found ? : -ENOMEM;
-		brdnr = stli_getbrdnr();
-		if (brdnr < 0)
-			return found ? : -ENOMEM;
-		brdp->brdnr = (unsigned int)brdnr;
-		eid = inb(iobase + 0xc82);
-		if (eid == ECP_EISAID)
-			brdp->brdtype = BRD_ECPE;
-		else if (eid == ONB_EISAID)
-			brdp->brdtype = BRD_ONBOARDE;
-		else
-			brdp->brdtype = BRD_UNKNOWN;
-		brdp->iobase = iobase;
-		outb(0x1, (iobase + 0xc84));
-		if (stli_eisamemprobe(brdp))
-			outb(0, (iobase + 0xc84));
-		if (stli_brdinit(brdp) < 0) {
-			kfree(brdp);
-			continue;
-		}
-
-		stli_brds[brdp->brdnr] = brdp;
-		found++;
-
-		for (i = 0; i < brdp->nrports; i++)
-			tty_register_device(stli_serial,
-					brdp->brdnr * STL_MAXPORTS + i, NULL);
-	}
-
-	return found;
-}
-#else
-static inline int stli_findeisabrds(void) { return 0; }
-#endif
-
-/*****************************************************************************/
-
-/*
- *	Find the next available board number that is free.
- */
-
-/*****************************************************************************/
-
-/*
- *	We have a Stallion board. Allocate a board structure and
- *	initialize it. Read its IO and MEMORY resources from PCI
- *	configuration space.
- */
-
-static int __devinit stli_pciprobe(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-	struct stlibrd *brdp;
-	unsigned int i;
-	int brdnr, retval = -EIO;
-
-	retval = pci_enable_device(pdev);
-	if (retval)
-		goto err;
-	brdp = stli_allocbrd();
-	if (brdp == NULL) {
-		retval = -ENOMEM;
-		goto err;
-	}
-	mutex_lock(&stli_brdslock);
-	brdnr = stli_getbrdnr();
-	if (brdnr < 0) {
-		printk(KERN_INFO "istallion: too many boards found, "
-			"maximum supported %d\n", STL_MAXBRDS);
-		mutex_unlock(&stli_brdslock);
-		retval = -EIO;
-		goto err_fr;
-	}
-	brdp->brdnr = (unsigned int)brdnr;
-	stli_brds[brdp->brdnr] = brdp;
-	mutex_unlock(&stli_brdslock);
-	brdp->brdtype = BRD_ECPPCI;
-/*
- *	We have all resources from the board, so lets setup the actual
- *	board structure now.
- */
-	brdp->iobase = pci_resource_start(pdev, 3);
-	brdp->memaddr = pci_resource_start(pdev, 2);
-	retval = stli_brdinit(brdp);
-	if (retval)
-		goto err_null;
-
-	set_bit(BST_PROBED, &brdp->state);
-	pci_set_drvdata(pdev, brdp);
-
-	EBRDENABLE(brdp);
-	brdp->enable = NULL;
-	brdp->disable = NULL;
-
-	for (i = 0; i < brdp->nrports; i++)
-		tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i,
-				&pdev->dev);
-
-	return 0;
-err_null:
-	stli_brds[brdp->brdnr] = NULL;
-err_fr:
-	kfree(brdp);
-err:
-	return retval;
-}
-
-static void __devexit stli_pciremove(struct pci_dev *pdev)
-{
-	struct stlibrd *brdp = pci_get_drvdata(pdev);
-
-	stli_cleanup_ports(brdp);
-
-	iounmap(brdp->membase);
-	if (brdp->iosize > 0)
-		release_region(brdp->iobase, brdp->iosize);
-
-	stli_brds[brdp->brdnr] = NULL;
-	kfree(brdp);
-}
-
-static struct pci_driver stli_pcidriver = {
-	.name = "istallion",
-	.id_table = istallion_pci_tbl,
-	.probe = stli_pciprobe,
-	.remove = __devexit_p(stli_pciremove)
-};
-/*****************************************************************************/
-
-/*
- *	Allocate a new board structure. Fill out the basic info in it.
- */
-
-static struct stlibrd *stli_allocbrd(void)
-{
-	struct stlibrd *brdp;
-
-	brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
-	if (!brdp) {
-		printk(KERN_ERR "istallion: failed to allocate memory "
-				"(size=%Zd)\n", sizeof(struct stlibrd));
-		return NULL;
-	}
-	brdp->magic = STLI_BOARDMAGIC;
-	return brdp;
-}
-
-/*****************************************************************************/
-
-/*
- *	Scan through all the boards in the configuration and see what we
- *	can find.
- */
-
-static int __init stli_initbrds(void)
-{
-	struct stlibrd *brdp, *nxtbrdp;
-	struct stlconf conf;
-	unsigned int i, j, found = 0;
-	int retval;
-
-	for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp);
-			stli_nrbrds++) {
-		memset(&conf, 0, sizeof(conf));
-		if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0)
-			continue;
-		if ((brdp = stli_allocbrd()) == NULL)
-			continue;
-		brdp->brdnr = stli_nrbrds;
-		brdp->brdtype = conf.brdtype;
-		brdp->iobase = conf.ioaddr1;
-		brdp->memaddr = conf.memaddr;
-		if (stli_brdinit(brdp) < 0) {
-			kfree(brdp);
-			continue;
-		}
-		stli_brds[brdp->brdnr] = brdp;
-		found++;
-
-		for (i = 0; i < brdp->nrports; i++)
-			tty_register_device(stli_serial,
-					brdp->brdnr * STL_MAXPORTS + i, NULL);
-	}
-
-	retval = stli_findeisabrds();
-	if (retval > 0)
-		found += retval;
-
-/*
- *	All found boards are initialized. Now for a little optimization, if
- *	no boards are sharing the "shared memory" regions then we can just
- *	leave them all enabled. This is in fact the usual case.
- */
-	stli_shared = 0;
-	if (stli_nrbrds > 1) {
-		for (i = 0; (i < stli_nrbrds); i++) {
-			brdp = stli_brds[i];
-			if (brdp == NULL)
-				continue;
-			for (j = i + 1; (j < stli_nrbrds); j++) {
-				nxtbrdp = stli_brds[j];
-				if (nxtbrdp == NULL)
-					continue;
-				if ((brdp->membase >= nxtbrdp->membase) &&
-				    (brdp->membase <= (nxtbrdp->membase +
-				    nxtbrdp->memsize - 1))) {
-					stli_shared++;
-					break;
-				}
-			}
-		}
-	}
-
-	if (stli_shared == 0) {
-		for (i = 0; (i < stli_nrbrds); i++) {
-			brdp = stli_brds[i];
-			if (brdp == NULL)
-				continue;
-			if (test_bit(BST_FOUND, &brdp->state)) {
-				EBRDENABLE(brdp);
-				brdp->enable = NULL;
-				brdp->disable = NULL;
-			}
-		}
-	}
-
-	retval = pci_register_driver(&stli_pcidriver);
-	if (retval && found == 0) {
-		printk(KERN_ERR "Neither isa nor eisa cards found nor pci "
-				"driver can be registered!\n");
-		goto err;
-	}
-
-	return 0;
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Code to handle an "staliomem" read operation. This device is the 
- *	contents of the board shared memory. It is used for down loading
- *	the slave image (and debugging :-)
- */
-
-static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp)
-{
-	unsigned long flags;
-	void __iomem *memptr;
-	struct stlibrd *brdp;
-	unsigned int brdnr;
-	int size, n;
-	void *p;
-	loff_t off = *offp;
-
-	brdnr = iminor(fp->f_path.dentry->d_inode);
-	if (brdnr >= stli_nrbrds)
-		return -ENODEV;
-	brdp = stli_brds[brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-	if (brdp->state == 0)
-		return -ENODEV;
-	if (off >= brdp->memsize || off + count < off)
-		return 0;
-
-	size = min(count, (size_t)(brdp->memsize - off));
-
-	/*
-	 *	Copy the data a page at a time
-	 */
-
-	p = (void *)__get_free_page(GFP_KERNEL);
-	if(p == NULL)
-		return -ENOMEM;
-
-	while (size > 0) {
-		spin_lock_irqsave(&brd_lock, flags);
-		EBRDENABLE(brdp);
-		memptr = EBRDGETMEMPTR(brdp, off);
-		n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
-		n = min(n, (int)PAGE_SIZE);
-		memcpy_fromio(p, memptr, n);
-		EBRDDISABLE(brdp);
-		spin_unlock_irqrestore(&brd_lock, flags);
-		if (copy_to_user(buf, p, n)) {
-			count = -EFAULT;
-			goto out;
-		}
-		off += n;
-		buf += n;
-		size -= n;
-	}
-out:
-	*offp = off;
-	free_page((unsigned long)p);
-	return count;
-}
-
-/*****************************************************************************/
-
-/*
- *	Code to handle an "staliomem" write operation. This device is the 
- *	contents of the board shared memory. It is used for down loading
- *	the slave image (and debugging :-)
- *
- *	FIXME: copy under lock
- */
-
-static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp)
-{
-	unsigned long flags;
-	void __iomem *memptr;
-	struct stlibrd *brdp;
-	char __user *chbuf;
-	unsigned int brdnr;
-	int size, n;
-	void *p;
-	loff_t off = *offp;
-
-	brdnr = iminor(fp->f_path.dentry->d_inode);
-
-	if (brdnr >= stli_nrbrds)
-		return -ENODEV;
-	brdp = stli_brds[brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-	if (brdp->state == 0)
-		return -ENODEV;
-	if (off >= brdp->memsize || off + count < off)
-		return 0;
-
-	chbuf = (char __user *) buf;
-	size = min(count, (size_t)(brdp->memsize - off));
-
-	/*
-	 *	Copy the data a page at a time
-	 */
-
-	p = (void *)__get_free_page(GFP_KERNEL);
-	if(p == NULL)
-		return -ENOMEM;
-
-	while (size > 0) {
-		n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
-		n = min(n, (int)PAGE_SIZE);
-		if (copy_from_user(p, chbuf, n)) {
-			if (count == 0)
-				count = -EFAULT;
-			goto out;
-		}
-		spin_lock_irqsave(&brd_lock, flags);
-		EBRDENABLE(brdp);
-		memptr = EBRDGETMEMPTR(brdp, off);
-		memcpy_toio(memptr, p, n);
-		EBRDDISABLE(brdp);
-		spin_unlock_irqrestore(&brd_lock, flags);
-		off += n;
-		chbuf += n;
-		size -= n;
-	}
-out:
-	free_page((unsigned long) p);
-	*offp = off;
-	return count;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the board stats structure to user app.
- */
-
-static int stli_getbrdstats(combrd_t __user *bp)
-{
-	struct stlibrd *brdp;
-	unsigned int i;
-
-	if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
-		return -EFAULT;
-	if (stli_brdstats.brd >= STL_MAXBRDS)
-		return -ENODEV;
-	brdp = stli_brds[stli_brdstats.brd];
-	if (brdp == NULL)
-		return -ENODEV;
-
-	memset(&stli_brdstats, 0, sizeof(combrd_t));
-
-	stli_brdstats.brd = brdp->brdnr;
-	stli_brdstats.type = brdp->brdtype;
-	stli_brdstats.hwid = 0;
-	stli_brdstats.state = brdp->state;
-	stli_brdstats.ioaddr = brdp->iobase;
-	stli_brdstats.memaddr = brdp->memaddr;
-	stli_brdstats.nrpanels = brdp->nrpanels;
-	stli_brdstats.nrports = brdp->nrports;
-	for (i = 0; (i < brdp->nrpanels); i++) {
-		stli_brdstats.panels[i].panel = i;
-		stli_brdstats.panels[i].hwid = brdp->panelids[i];
-		stli_brdstats.panels[i].nrports = brdp->panels[i];
-	}
-
-	if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Resolve the referenced port number into a port struct pointer.
- */
-
-static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr,
-		unsigned int portnr)
-{
-	struct stlibrd *brdp;
-	unsigned int i;
-
-	if (brdnr >= STL_MAXBRDS)
-		return NULL;
-	brdp = stli_brds[brdnr];
-	if (brdp == NULL)
-		return NULL;
-	for (i = 0; (i < panelnr); i++)
-		portnr += brdp->panels[i];
-	if (portnr >= brdp->nrports)
-		return NULL;
-	return brdp->ports[portnr];
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the port stats structure to user app. A NULL port struct
- *	pointer passed in means that we need to find out from the app
- *	what port to get stats for (used through board control device).
- */
-
-static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
-{
-	unsigned long	flags;
-	struct stlibrd	*brdp;
-	int		rc;
-
-	memset(&stli_comstats, 0, sizeof(comstats_t));
-
-	if (portp == NULL)
-		return -ENODEV;
-	brdp = stli_brds[portp->brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-
-	mutex_lock(&portp->port.mutex);
-	if (test_bit(BST_STARTED, &brdp->state)) {
-		if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
-		    &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
-			mutex_unlock(&portp->port.mutex);
-			return rc;
-		}
-	} else {
-		memset(&stli_cdkstats, 0, sizeof(asystats_t));
-	}
-
-	stli_comstats.brd = portp->brdnr;
-	stli_comstats.panel = portp->panelnr;
-	stli_comstats.port = portp->portnr;
-	stli_comstats.state = portp->state;
-	stli_comstats.flags = portp->port.flags;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	if (tty != NULL) {
-		if (portp->port.tty == tty) {
-			stli_comstats.ttystate = tty->flags;
-			stli_comstats.rxbuffered = -1;
-			if (tty->termios != NULL) {
-				stli_comstats.cflags = tty->termios->c_cflag;
-				stli_comstats.iflags = tty->termios->c_iflag;
-				stli_comstats.oflags = tty->termios->c_oflag;
-				stli_comstats.lflags = tty->termios->c_lflag;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	stli_comstats.txtotal = stli_cdkstats.txchars;
-	stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover;
-	stli_comstats.txbuffered = stli_cdkstats.txringq;
-	stli_comstats.rxbuffered += stli_cdkstats.rxringq;
-	stli_comstats.rxoverrun = stli_cdkstats.overruns;
-	stli_comstats.rxparity = stli_cdkstats.parity;
-	stli_comstats.rxframing = stli_cdkstats.framing;
-	stli_comstats.rxlost = stli_cdkstats.ringover;
-	stli_comstats.rxbreaks = stli_cdkstats.rxbreaks;
-	stli_comstats.txbreaks = stli_cdkstats.txbreaks;
-	stli_comstats.txxon = stli_cdkstats.txstart;
-	stli_comstats.txxoff = stli_cdkstats.txstop;
-	stli_comstats.rxxon = stli_cdkstats.rxstart;
-	stli_comstats.rxxoff = stli_cdkstats.rxstop;
-	stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2;
-	stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff;
-	stli_comstats.modem = stli_cdkstats.dcdcnt;
-	stli_comstats.hwid = stli_cdkstats.hwid;
-	stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
-	mutex_unlock(&portp->port.mutex);
-
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the port stats structure to user app. A NULL port struct
- *	pointer passed in means that we need to find out from the app
- *	what port to get stats for (used through board control device).
- */
-
-static int stli_getportstats(struct tty_struct *tty, struct stliport *portp,
-							comstats_t __user *cp)
-{
-	struct stlibrd *brdp;
-	int rc;
-
-	if (!portp) {
-		if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
-			return -EFAULT;
-		portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
-			stli_comstats.port);
-		if (!portp)
-			return -ENODEV;
-	}
-
-	brdp = stli_brds[portp->brdnr];
-	if (!brdp)
-		return -ENODEV;
-
-	if ((rc = stli_portcmdstats(tty, portp)) < 0)
-		return rc;
-
-	return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ?
-			-EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Clear the port stats structure. We also return it zeroed out...
- */
-
-static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
-{
-	struct stlibrd *brdp;
-	int rc;
-
-	if (!portp) {
-		if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
-			return -EFAULT;
-		portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
-			stli_comstats.port);
-		if (!portp)
-			return -ENODEV;
-	}
-
-	brdp = stli_brds[portp->brdnr];
-	if (!brdp)
-		return -ENODEV;
-
-	mutex_lock(&portp->port.mutex);
-
-	if (test_bit(BST_STARTED, &brdp->state)) {
-		if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
-			mutex_unlock(&portp->port.mutex);
-			return rc;
-		}
-	}
-
-	memset(&stli_comstats, 0, sizeof(comstats_t));
-	stli_comstats.brd = portp->brdnr;
-	stli_comstats.panel = portp->panelnr;
-	stli_comstats.port = portp->portnr;
-	mutex_unlock(&portp->port.mutex);
-
-	if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the entire driver ports structure to a user app.
- */
-
-static int stli_getportstruct(struct stliport __user *arg)
-{
-	struct stliport stli_dummyport;
-	struct stliport *portp;
-
-	if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport)))
-		return -EFAULT;
-	portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr,
-		 stli_dummyport.portnr);
-	if (!portp)
-		return -ENODEV;
-	if (copy_to_user(arg, portp, sizeof(struct stliport)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the entire driver board structure to a user app.
- */
-
-static int stli_getbrdstruct(struct stlibrd __user *arg)
-{
-	struct stlibrd stli_dummybrd;
-	struct stlibrd *brdp;
-
-	if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd)))
-		return -EFAULT;
-	if (stli_dummybrd.brdnr >= STL_MAXBRDS)
-		return -ENODEV;
-	brdp = stli_brds[stli_dummybrd.brdnr];
-	if (!brdp)
-		return -ENODEV;
-	if (copy_to_user(arg, brdp, sizeof(struct stlibrd)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	The "staliomem" device is also required to do some special operations on
- *	the board. We need to be able to send an interrupt to the board,
- *	reset it, and start/stop it.
- */
-
-static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-{
-	struct stlibrd *brdp;
-	int brdnr, rc, done;
-	void __user *argp = (void __user *)arg;
-
-/*
- *	First up handle the board independent ioctls.
- */
-	done = 0;
-	rc = 0;
-
-	switch (cmd) {
-	case COM_GETPORTSTATS:
-		rc = stli_getportstats(NULL, NULL, argp);
-		done++;
-		break;
-	case COM_CLRPORTSTATS:
-		rc = stli_clrportstats(NULL, argp);
-		done++;
-		break;
-	case COM_GETBRDSTATS:
-		rc = stli_getbrdstats(argp);
-		done++;
-		break;
-	case COM_READPORT:
-		rc = stli_getportstruct(argp);
-		done++;
-		break;
-	case COM_READBOARD:
-		rc = stli_getbrdstruct(argp);
-		done++;
-		break;
-	}
-	if (done)
-		return rc;
-
-/*
- *	Now handle the board specific ioctls. These all depend on the
- *	minor number of the device they were called from.
- */
-	brdnr = iminor(fp->f_dentry->d_inode);
-	if (brdnr >= STL_MAXBRDS)
-		return -ENODEV;
-	brdp = stli_brds[brdnr];
-	if (!brdp)
-		return -ENODEV;
-	if (brdp->state == 0)
-		return -ENODEV;
-
-	switch (cmd) {
-	case STL_BINTR:
-		EBRDINTR(brdp);
-		break;
-	case STL_BSTART:
-		rc = stli_startbrd(brdp);
-		break;
-	case STL_BSTOP:
-		clear_bit(BST_STARTED, &brdp->state);
-		break;
-	case STL_BRESET:
-		clear_bit(BST_STARTED, &brdp->state);
-		EBRDRESET(brdp);
-		if (stli_shared == 0) {
-			if (brdp->reenable != NULL)
-				(* brdp->reenable)(brdp);
-		}
-		break;
-	default:
-		rc = -ENOIOCTLCMD;
-		break;
-	}
-	return rc;
-}
-
-static const struct tty_operations stli_ops = {
-	.open = stli_open,
-	.close = stli_close,
-	.write = stli_write,
-	.put_char = stli_putchar,
-	.flush_chars = stli_flushchars,
-	.write_room = stli_writeroom,
-	.chars_in_buffer = stli_charsinbuffer,
-	.ioctl = stli_ioctl,
-	.set_termios = stli_settermios,
-	.throttle = stli_throttle,
-	.unthrottle = stli_unthrottle,
-	.stop = stli_stop,
-	.start = stli_start,
-	.hangup = stli_hangup,
-	.flush_buffer = stli_flushbuffer,
-	.break_ctl = stli_breakctl,
-	.wait_until_sent = stli_waituntilsent,
-	.send_xchar = stli_sendxchar,
-	.tiocmget = stli_tiocmget,
-	.tiocmset = stli_tiocmset,
-	.proc_fops = &stli_proc_fops,
-};
-
-static const struct tty_port_operations stli_port_ops = {
-	.carrier_raised = stli_carrier_raised,
-	.dtr_rts = stli_dtr_rts,
-	.activate = stli_activate,
-	.shutdown = stli_shutdown,
-};
-
-/*****************************************************************************/
-/*
- *	Loadable module initialization stuff.
- */
-
-static void istallion_cleanup_isa(void)
-{
-	struct stlibrd	*brdp;
-	unsigned int j;
-
-	for (j = 0; (j < stli_nrbrds); j++) {
-		if ((brdp = stli_brds[j]) == NULL ||
-				test_bit(BST_PROBED, &brdp->state))
-			continue;
-
-		stli_cleanup_ports(brdp);
-
-		iounmap(brdp->membase);
-		if (brdp->iosize > 0)
-			release_region(brdp->iobase, brdp->iosize);
-		kfree(brdp);
-		stli_brds[j] = NULL;
-	}
-}
-
-static int __init istallion_module_init(void)
-{
-	unsigned int i;
-	int retval;
-
-	printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion);
-
-	spin_lock_init(&stli_lock);
-	spin_lock_init(&brd_lock);
-
-	stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
-	if (!stli_txcookbuf) {
-		printk(KERN_ERR "istallion: failed to allocate memory "
-				"(size=%d)\n", STLI_TXBUFSIZE);
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
-	if (!stli_serial) {
-		retval = -ENOMEM;
-		goto err_free;
-	}
-
-	stli_serial->owner = THIS_MODULE;
-	stli_serial->driver_name = stli_drvname;
-	stli_serial->name = stli_serialname;
-	stli_serial->major = STL_SERIALMAJOR;
-	stli_serial->minor_start = 0;
-	stli_serial->type = TTY_DRIVER_TYPE_SERIAL;
-	stli_serial->subtype = SERIAL_TYPE_NORMAL;
-	stli_serial->init_termios = stli_deftermios;
-	stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(stli_serial, &stli_ops);
-
-	retval = tty_register_driver(stli_serial);
-	if (retval) {
-		printk(KERN_ERR "istallion: failed to register serial driver\n");
-		goto err_ttyput;
-	}
-
-	retval = stli_initbrds();
-	if (retval)
-		goto err_ttyunr;
-
-/*
- *	Set up a character driver for the shared memory region. We need this
- *	to down load the slave code image. Also it is a useful debugging tool.
- */
-	retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
-	if (retval) {
-		printk(KERN_ERR "istallion: failed to register serial memory "
-				"device\n");
-		goto err_deinit;
-	}
-
-	istallion_class = class_create(THIS_MODULE, "staliomem");
-	for (i = 0; i < 4; i++)
-		device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
-			      NULL, "staliomem%d", i);
-
-	return 0;
-err_deinit:
-	pci_unregister_driver(&stli_pcidriver);
-	istallion_cleanup_isa();
-err_ttyunr:
-	tty_unregister_driver(stli_serial);
-err_ttyput:
-	put_tty_driver(stli_serial);
-err_free:
-	kfree(stli_txcookbuf);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-static void __exit istallion_module_exit(void)
-{
-	unsigned int j;
-
-	printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
-		stli_drvversion);
-
-	if (stli_timeron) {
-		stli_timeron = 0;
-		del_timer_sync(&stli_timerlist);
-	}
-
-	unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
-
-	for (j = 0; j < 4; j++)
-		device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, j));
-	class_destroy(istallion_class);
-
-	pci_unregister_driver(&stli_pcidriver);
-	istallion_cleanup_isa();
-
-	tty_unregister_driver(stli_serial);
-	put_tty_driver(stli_serial);
-
-	kfree(stli_txcookbuf);
-}
-
-module_init(istallion_module_init);
-module_exit(istallion_module_exit);
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
deleted file mode 100644
index 602643a..0000000
--- a/drivers/char/riscom8.c
+++ /dev/null
@@ -1,1560 +0,0 @@
-/*
- *      linux/drivers/char/riscom.c  -- RISCom/8 multiport serial driver.
- *
- *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *      This code is loosely based on the Linux serial driver, written by
- *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card
- *      programming info was obtained from various drivers for other OSes
- *	(FreeBSD, ISC, etc), but no source code from those drivers were
- *	directly included in this driver.
- *
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *	Revision 1.1
- *
- *	ChangeLog:
- *	Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
- *	- get rid of check_region and several cleanups
- */
-
-#include <linux/module.h>
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/tty_flip.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-
-#include <linux/uaccess.h>
-
-#include "riscom8.h"
-#include "riscom8_reg.h"
-
-/* Am I paranoid or not ? ;-) */
-#define RISCOM_PARANOIA_CHECK
-
-/*
- * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals.
- * You can slightly speed up things by #undefing the following option,
- * if you are REALLY sure that your board is correct one.
- */
-
-#define RISCOM_BRAIN_DAMAGED_CTS
-
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#undef RC_REPORT_FIFO
-#undef RC_REPORT_OVERRUN
-
-
-#define RISCOM_LEGAL_FLAGS \
-	(ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
-	 ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
-	 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-
-static struct tty_driver *riscom_driver;
-
-static DEFINE_SPINLOCK(riscom_lock);
-
-static struct riscom_board rc_board[RC_NBOARD] =  {
-	{
-		.base	= RC_IOBASE1,
-	},
-	{
-		.base	= RC_IOBASE2,
-	},
-	{
-		.base	= RC_IOBASE3,
-	},
-	{
-		.base	= RC_IOBASE4,
-	},
-};
-
-static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
-
-/* RISCom/8 I/O ports addresses (without address translation) */
-static unsigned short rc_ioport[] =  {
-#if 1
-	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
-#else
-	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
-	0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
-	0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
-#endif
-};
-#define RC_NIOPORT	ARRAY_SIZE(rc_ioport)
-
-
-static int rc_paranoia_check(struct riscom_port const *port,
-				    char *name, const char *routine)
-{
-#ifdef RISCOM_PARANOIA_CHECK
-	static const char badmagic[] = KERN_INFO
-		"rc: Warning: bad riscom port magic number for device %s in %s\n";
-	static const char badinfo[] = KERN_INFO
-		"rc: Warning: null riscom port for device %s in %s\n";
-
-	if (!port) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (port->magic != RISCOM8_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- *
- *  Service functions for RISCom/8 driver.
- *
- */
-
-/* Get board number from pointer */
-static inline int board_No(struct riscom_board const *bp)
-{
-	return bp - rc_board;
-}
-
-/* Get port number from pointer */
-static inline int port_No(struct riscom_port const *port)
-{
-	return RC_PORT(port - rc_port);
-}
-
-/* Get pointer to board from pointer to port */
-static inline struct riscom_board *port_Board(struct riscom_port const *port)
-{
-	return &rc_board[RC_BOARD(port - rc_port)];
-}
-
-/* Input Byte from CL CD180 register */
-static inline unsigned char rc_in(struct riscom_board const *bp,
-							unsigned short reg)
-{
-	return inb(bp->base + RC_TO_ISA(reg));
-}
-
-/* Output Byte to CL CD180 register */
-static inline void rc_out(struct riscom_board const *bp, unsigned short reg,
-			  unsigned char val)
-{
-	outb(val, bp->base + RC_TO_ISA(reg));
-}
-
-/* Wait for Channel Command Register ready */
-static void rc_wait_CCR(struct riscom_board const *bp)
-{
-	unsigned long delay;
-
-	/* FIXME: need something more descriptive then 100000 :) */
-	for (delay = 100000; delay; delay--)
-		if (!rc_in(bp, CD180_CCR))
-			return;
-
-	printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-/*
- *  RISCom/8 probe functions.
- */
-
-static int rc_request_io_range(struct riscom_board * const bp)
-{
-	int i;
-
-	for (i = 0; i < RC_NIOPORT; i++)
-		if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
-				   "RISCom/8"))  {
-			goto out_release;
-		}
-	return 0;
-out_release:
-	printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
-			 board_No(bp), bp->base);
-	while (--i >= 0)
-		release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
-	return 1;
-}
-
-static void rc_release_io_range(struct riscom_board * const bp)
-{
-	int i;
-
-	for (i = 0; i < RC_NIOPORT; i++)
-		release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
-}
-
-/* Reset and setup CD180 chip */
-static void __init rc_init_CD180(struct riscom_board const *bp)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	rc_out(bp, RC_CTOUT, 0);     	           /* Clear timeout        */
-	rc_wait_CCR(bp);			   /* Wait for CCR ready   */
-	rc_out(bp, CD180_CCR, CCR_HARDRESET);      /* Reset CD180 chip     */
-	spin_unlock_irqrestore(&riscom_lock, flags);
-	msleep(50);				   /* Delay 0.05 sec       */
-	spin_lock_irqsave(&riscom_lock, flags);
-	rc_out(bp, CD180_GIVR, RC_ID);             /* Set ID for this chip */
-	rc_out(bp, CD180_GICR, 0);                 /* Clear all bits       */
-	rc_out(bp, CD180_PILR1, RC_ACK_MINT);      /* Prio for modem intr  */
-	rc_out(bp, CD180_PILR2, RC_ACK_TINT);      /* Prio for tx intr     */
-	rc_out(bp, CD180_PILR3, RC_ACK_RINT);      /* Prio for rx intr	   */
-
-	/* Setting up prescaler. We need 4 ticks per 1 ms */
-	rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
-	rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-/* Main probing routine, also sets irq. */
-static int __init rc_probe(struct riscom_board *bp)
-{
-	unsigned char val1, val2;
-	int irqs = 0;
-	int retries;
-
-	bp->irq = 0;
-
-	if (rc_request_io_range(bp))
-		return 1;
-
-	/* Are the I/O ports here ? */
-	rc_out(bp, CD180_PPRL, 0x5a);
-	outb(0xff, 0x80);
-	val1 = rc_in(bp, CD180_PPRL);
-	rc_out(bp, CD180_PPRL, 0xa5);
-	outb(0x00, 0x80);
-	val2 = rc_in(bp, CD180_PPRL);
-
-	if ((val1 != 0x5a) || (val2 != 0xa5))  {
-		printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
-		       board_No(bp), bp->base);
-		goto out_release;
-	}
-
-	/* It's time to find IRQ for this board */
-	for (retries = 0; retries < 5 && irqs <= 0; retries++) {
-		irqs = probe_irq_on();
-		rc_init_CD180(bp);		 /* Reset CD180 chip	     */
-		rc_out(bp, CD180_CAR, 2);	 /* Select port 2	     */
-		rc_wait_CCR(bp);
-		rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter	     */
-		rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr     */
-		msleep(50);
-		irqs = probe_irq_off(irqs);
-		val1 = rc_in(bp, RC_BSR);	/* Get Board Status reg	     */
-		val2 = rc_in(bp, RC_ACK_TINT);  /* ACK interrupt	     */
-		rc_init_CD180(bp);	       	/* Reset CD180 again	     */
-
-		if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX)))  {
-			printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
-					"found.\n", board_No(bp), bp->base);
-			goto out_release;
-		}
-	}
-
-	if (irqs <= 0)  {
-		printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
-				"at 0x%03x.\n", board_No(bp), bp->base);
-		goto out_release;
-	}
-	bp->irq = irqs;
-	bp->flags |= RC_BOARD_PRESENT;
-
-	printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
-			 "0x%03x, IRQ %d.\n",
-	       board_No(bp),
-	       (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A',   /* Board revision */
-	       bp->base, bp->irq);
-
-	return 0;
-out_release:
-	rc_release_io_range(bp);
-	return 1;
-}
-
-/*
- *
- *  Interrupt processing routines.
- *
- */
-
-static struct riscom_port *rc_get_port(struct riscom_board const *bp,
-					       unsigned char const *what)
-{
-	unsigned char channel;
-	struct riscom_port *port;
-
-	channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
-	if (channel < CD180_NCH)  {
-		port = &rc_port[board_No(bp) * RC_NPORT + channel];
-		if (port->port.flags & ASYNC_INITIALIZED)
-			return port;
-	}
-	printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
-	       board_No(bp), what, channel);
-	return NULL;
-}
-
-static void rc_receive_exc(struct riscom_board const *bp)
-{
-	struct riscom_port *port;
-	struct tty_struct *tty;
-	unsigned char status;
-	unsigned char ch, flag;
-
-	port = rc_get_port(bp, "Receive");
-	if (port == NULL)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-
-#ifdef RC_REPORT_OVERRUN
-	status = rc_in(bp, CD180_RCSR);
-	if (status & RCSR_OE)
-		port->overrun++;
-	status &= port->mark_mask;
-#else
-	status = rc_in(bp, CD180_RCSR) & port->mark_mask;
-#endif
-	ch = rc_in(bp, CD180_RDR);
-	if (!status)
-		goto out;
-	if (status & RCSR_TOUT)  {
-		printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
-				    "Hardware problems ?\n",
-		       board_No(bp), port_No(port));
-		goto out;
-
-	} else if (status & RCSR_BREAK)  {
-		printk(KERN_INFO "rc%d: port %d: Handling break...\n",
-		       board_No(bp), port_No(port));
-		flag = TTY_BREAK;
-		if (tty && (port->port.flags & ASYNC_SAK))
-			do_SAK(tty);
-
-	} else if (status & RCSR_PE)
-		flag = TTY_PARITY;
-
-	else if (status & RCSR_FE)
-		flag = TTY_FRAME;
-
-	else if (status & RCSR_OE)
-		flag = TTY_OVERRUN;
-	else
-		flag = TTY_NORMAL;
-
-	if (tty) {
-		tty_insert_flip_char(tty, ch, flag);
-		tty_flip_buffer_push(tty);
-	}
-out:
-	tty_kref_put(tty);
-}
-
-static void rc_receive(struct riscom_board const *bp)
-{
-	struct riscom_port *port;
-	struct tty_struct *tty;
-	unsigned char count;
-
-	port = rc_get_port(bp, "Receive");
-	if (port == NULL)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-
-	count = rc_in(bp, CD180_RDCR);
-
-#ifdef RC_REPORT_FIFO
-	port->hits[count > 8 ? 9 : count]++;
-#endif
-
-	while (count--)  {
-		u8 ch = rc_in(bp, CD180_RDR);
-		if (tty)
-			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	}
-	if (tty) {
-		tty_flip_buffer_push(tty);
-		tty_kref_put(tty);
-	}
-}
-
-static void rc_transmit(struct riscom_board const *bp)
-{
-	struct riscom_port *port;
-	struct tty_struct *tty;
-	unsigned char count;
-
-	port = rc_get_port(bp, "Transmit");
-	if (port == NULL)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-
-	if (port->IER & IER_TXEMPTY) {
-		/* FIFO drained */
-		rc_out(bp, CD180_CAR, port_No(port));
-		port->IER &= ~IER_TXEMPTY;
-		rc_out(bp, CD180_IER, port->IER);
-		goto out;
-	}
-
-	if ((port->xmit_cnt <= 0 && !port->break_length)
-	    || (tty && (tty->stopped || tty->hw_stopped)))  {
-		rc_out(bp, CD180_CAR, port_No(port));
-		port->IER &= ~IER_TXRDY;
-		rc_out(bp, CD180_IER, port->IER);
-		goto out;
-	}
-
-	if (port->break_length)  {
-		if (port->break_length > 0)  {
-			if (port->COR2 & COR2_ETC)  {
-				rc_out(bp, CD180_TDR, CD180_C_ESC);
-				rc_out(bp, CD180_TDR, CD180_C_SBRK);
-				port->COR2 &= ~COR2_ETC;
-			}
-			count = min_t(int, port->break_length, 0xff);
-			rc_out(bp, CD180_TDR, CD180_C_ESC);
-			rc_out(bp, CD180_TDR, CD180_C_DELAY);
-			rc_out(bp, CD180_TDR, count);
-			port->break_length -= count;
-			if (port->break_length == 0)
-				port->break_length--;
-		} else  {
-			rc_out(bp, CD180_TDR, CD180_C_ESC);
-			rc_out(bp, CD180_TDR, CD180_C_EBRK);
-			rc_out(bp, CD180_COR2, port->COR2);
-			rc_wait_CCR(bp);
-			rc_out(bp, CD180_CCR, CCR_CORCHG2);
-			port->break_length = 0;
-		}
-		goto out;
-	}
-
-	count = CD180_NFIFO;
-	do {
-		rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
-		port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
-		if (--port->xmit_cnt <= 0)
-			break;
-	} while (--count > 0);
-
-	if (port->xmit_cnt <= 0)  {
-		rc_out(bp, CD180_CAR, port_No(port));
-		port->IER &= ~IER_TXRDY;
-		rc_out(bp, CD180_IER, port->IER);
-	}
-	if (tty && port->xmit_cnt <= port->wakeup_chars)
-		tty_wakeup(tty);
-out:
-	tty_kref_put(tty);
-}
-
-static void rc_check_modem(struct riscom_board const *bp)
-{
-	struct riscom_port *port;
-	struct tty_struct *tty;
-	unsigned char mcr;
-
-	port = rc_get_port(bp, "Modem");
-	if (port == NULL)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-
-	mcr = rc_in(bp, CD180_MCR);
-	if (mcr & MCR_CDCHG) {
-		if (rc_in(bp, CD180_MSVR) & MSVR_CD)
-			wake_up_interruptible(&port->port.open_wait);
-		else if (tty)
-			tty_hangup(tty);
-	}
-
-#ifdef RISCOM_BRAIN_DAMAGED_CTS
-	if (mcr & MCR_CTSCHG)  {
-		if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
-			port->IER |= IER_TXRDY;
-			if (tty) {
-				tty->hw_stopped = 0;
-				if (port->xmit_cnt <= port->wakeup_chars)
-					tty_wakeup(tty);
-			}
-		} else  {
-			if (tty)
-				tty->hw_stopped = 1;
-			port->IER &= ~IER_TXRDY;
-		}
-		rc_out(bp, CD180_IER, port->IER);
-	}
-	if (mcr & MCR_DSRCHG)  {
-		if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
-			port->IER |= IER_TXRDY;
-			if (tty) {
-				tty->hw_stopped = 0;
-				if (port->xmit_cnt <= port->wakeup_chars)
-					tty_wakeup(tty);
-			}
-		} else  {
-			if (tty)
-				tty->hw_stopped = 1;
-			port->IER &= ~IER_TXRDY;
-		}
-		rc_out(bp, CD180_IER, port->IER);
-	}
-#endif /* RISCOM_BRAIN_DAMAGED_CTS */
-
-	/* Clear change bits */
-	rc_out(bp, CD180_MCR, 0);
-	tty_kref_put(tty);
-}
-
-/* The main interrupt processing routine */
-static irqreturn_t rc_interrupt(int dummy, void *dev_id)
-{
-	unsigned char status;
-	unsigned char ack;
-	struct riscom_board *bp = dev_id;
-	unsigned long loop = 0;
-	int handled = 0;
-
-	if (!(bp->flags & RC_BOARD_ACTIVE))
-		return IRQ_NONE;
-
-	while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
-				 (RC_BSR_TOUT | RC_BSR_TINT |
-				  RC_BSR_MINT | RC_BSR_RINT))) {
-		handled = 1;
-		if (status & RC_BSR_TOUT)
-			printk(KERN_WARNING "rc%d: Got timeout. Hardware "
-					    "error?\n", board_No(bp));
-		else if (status & RC_BSR_RINT) {
-			ack = rc_in(bp, RC_ACK_RINT);
-			if (ack == (RC_ID | GIVR_IT_RCV))
-				rc_receive(bp);
-			else if (ack == (RC_ID | GIVR_IT_REXC))
-				rc_receive_exc(bp);
-			else
-				printk(KERN_WARNING "rc%d: Bad receive ack "
-						    "0x%02x.\n",
-				       board_No(bp), ack);
-		} else if (status & RC_BSR_TINT) {
-			ack = rc_in(bp, RC_ACK_TINT);
-			if (ack == (RC_ID | GIVR_IT_TX))
-				rc_transmit(bp);
-			else
-				printk(KERN_WARNING "rc%d: Bad transmit ack "
-						    "0x%02x.\n",
-				       board_No(bp), ack);
-		} else /* if (status & RC_BSR_MINT) */ {
-			ack = rc_in(bp, RC_ACK_MINT);
-			if (ack == (RC_ID | GIVR_IT_MODEM))
-				rc_check_modem(bp);
-			else
-				printk(KERN_WARNING "rc%d: Bad modem ack "
-						    "0x%02x.\n",
-				       board_No(bp), ack);
-		}
-		rc_out(bp, CD180_EOIR, 0);   /* Mark end of interrupt */
-		rc_out(bp, RC_CTOUT, 0);     /* Clear timeout flag    */
-	}
-	return IRQ_RETVAL(handled);
-}
-
-/*
- *  Routines for open & close processing.
- */
-
-/* Called with disabled interrupts */
-static int rc_setup_board(struct riscom_board *bp)
-{
-	int error;
-
-	if (bp->flags & RC_BOARD_ACTIVE)
-		return 0;
-
-	error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
-			    "RISCom/8", bp);
-	if (error)
-		return error;
-
-	rc_out(bp, RC_CTOUT, 0);       		/* Just in case         */
-	bp->DTR = ~0;
-	rc_out(bp, RC_DTR, bp->DTR);	        /* Drop DTR on all ports */
-
-	bp->flags |= RC_BOARD_ACTIVE;
-
-	return 0;
-}
-
-/* Called with disabled interrupts */
-static void rc_shutdown_board(struct riscom_board *bp)
-{
-	if (!(bp->flags & RC_BOARD_ACTIVE))
-		return;
-
-	bp->flags &= ~RC_BOARD_ACTIVE;
-
-	free_irq(bp->irq, NULL);
-
-	bp->DTR = ~0;
-	rc_out(bp, RC_DTR, bp->DTR);	       /* Drop DTR on all ports */
-
-}
-
-/*
- * Setting up port characteristics.
- * Must be called with disabled interrupts
- */
-static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
-						struct riscom_port *port)
-{
-	unsigned long baud;
-	long tmp;
-	unsigned char cor1 = 0, cor3 = 0;
-	unsigned char mcor1 = 0, mcor2 = 0;
-
-	port->IER  = 0;
-	port->COR2 = 0;
-	port->MSVR = MSVR_RTS;
-
-	baud = tty_get_baud_rate(tty);
-
-	/* Select port on the board */
-	rc_out(bp, CD180_CAR, port_No(port));
-
-	if (!baud)  {
-		/* Drop DTR & exit */
-		bp->DTR |= (1u << port_No(port));
-		rc_out(bp, RC_DTR, bp->DTR);
-		return;
-	} else  {
-		/* Set DTR on */
-		bp->DTR &= ~(1u << port_No(port));
-		rc_out(bp, RC_DTR, bp->DTR);
-	}
-
-	/*
-	 * Now we must calculate some speed depended things
-	 */
-
-	/* Set baud rate for port */
-	tmp = (((RC_OSCFREQ + baud/2) / baud +
-		CD180_TPC/2) / CD180_TPC);
-
-	rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
-	rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
-	rc_out(bp, CD180_RBPRL, tmp & 0xff);
-	rc_out(bp, CD180_TBPRL, tmp & 0xff);
-
-	baud = (baud + 5) / 10;   /* Estimated CPS */
-
-	/* Two timer ticks seems enough to wakeup something like SLIP driver */
-	tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
-	port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
-					      SERIAL_XMIT_SIZE - 1 : tmp);
-
-	/* Receiver timeout will be transmission time for 1.5 chars */
-	tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
-	tmp = (tmp > 0xff) ? 0xff : tmp;
-	rc_out(bp, CD180_RTPR, tmp);
-
-	switch (C_CSIZE(tty)) {
-	case CS5:
-		cor1 |= COR1_5BITS;
-		break;
-	case CS6:
-		cor1 |= COR1_6BITS;
-		break;
-	case CS7:
-		cor1 |= COR1_7BITS;
-		break;
-	case CS8:
-		cor1 |= COR1_8BITS;
-		break;
-	}
-	if (C_CSTOPB(tty))
-		cor1 |= COR1_2SB;
-
-	cor1 |= COR1_IGNORE;
-	if (C_PARENB(tty)) {
-		cor1 |= COR1_NORMPAR;
-		if (C_PARODD(tty))
-			cor1 |= COR1_ODDP;
-		if (I_INPCK(tty))
-			cor1 &= ~COR1_IGNORE;
-	}
-	/* Set marking of some errors */
-	port->mark_mask = RCSR_OE | RCSR_TOUT;
-	if (I_INPCK(tty))
-		port->mark_mask |= RCSR_FE | RCSR_PE;
-	if (I_BRKINT(tty) || I_PARMRK(tty))
-		port->mark_mask |= RCSR_BREAK;
-	if (I_IGNPAR(tty))
-		port->mark_mask &= ~(RCSR_FE | RCSR_PE);
-	if (I_IGNBRK(tty)) {
-		port->mark_mask &= ~RCSR_BREAK;
-		if (I_IGNPAR(tty))
-			/* Real raw mode. Ignore all */
-			port->mark_mask &= ~RCSR_OE;
-	}
-	/* Enable Hardware Flow Control */
-	if (C_CRTSCTS(tty))  {
-#ifdef RISCOM_BRAIN_DAMAGED_CTS
-		port->IER |= IER_DSR | IER_CTS;
-		mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
-		mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
-		tty->hw_stopped = !(rc_in(bp, CD180_MSVR) &
-						(MSVR_CTS|MSVR_DSR));
-#else
-		port->COR2 |= COR2_CTSAE;
-#endif
-	}
-	/* Enable Software Flow Control. FIXME: I'm not sure about this */
-	/* Some people reported that it works, but I still doubt */
-	if (I_IXON(tty))  {
-		port->COR2 |= COR2_TXIBE;
-		cor3 |= (COR3_FCT | COR3_SCDE);
-		if (I_IXANY(tty))
-			port->COR2 |= COR2_IXM;
-		rc_out(bp, CD180_SCHR1, START_CHAR(tty));
-		rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
-		rc_out(bp, CD180_SCHR3, START_CHAR(tty));
-		rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
-	}
-	if (!C_CLOCAL(tty))  {
-		/* Enable CD check */
-		port->IER |= IER_CD;
-		mcor1 |= MCOR1_CDZD;
-		mcor2 |= MCOR2_CDOD;
-	}
-
-	if (C_CREAD(tty))
-		/* Enable receiver */
-		port->IER |= IER_RXD;
-
-	/* Set input FIFO size (1-8 bytes) */
-	cor3 |= RISCOM_RXFIFO;
-	/* Setting up CD180 channel registers */
-	rc_out(bp, CD180_COR1, cor1);
-	rc_out(bp, CD180_COR2, port->COR2);
-	rc_out(bp, CD180_COR3, cor3);
-	/* Make CD180 know about registers change */
-	rc_wait_CCR(bp);
-	rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
-	/* Setting up modem option registers */
-	rc_out(bp, CD180_MCOR1, mcor1);
-	rc_out(bp, CD180_MCOR2, mcor2);
-	/* Enable CD180 transmitter & receiver */
-	rc_wait_CCR(bp);
-	rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
-	/* Enable interrupts */
-	rc_out(bp, CD180_IER, port->IER);
-	/* And finally set RTS on */
-	rc_out(bp, CD180_MSVR, port->MSVR);
-}
-
-/* Must be called with interrupts enabled */
-static int rc_activate_port(struct tty_port *port, struct tty_struct *tty)
-{
-	struct riscom_port *rp = container_of(port, struct riscom_port, port);
-	struct riscom_board *bp = port_Board(rp);
-	unsigned long flags;
-
-	if (tty_port_alloc_xmit_buf(port) < 0)
-		return -ENOMEM;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	clear_bit(TTY_IO_ERROR, &tty->flags);
-	bp->count++;
-	rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0;
-	rc_change_speed(tty, bp, rp);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-	return 0;
-}
-
-/* Must be called with interrupts disabled */
-static void rc_shutdown_port(struct tty_struct *tty,
-			struct riscom_board *bp, struct riscom_port *port)
-{
-#ifdef RC_REPORT_OVERRUN
-	printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
-	       board_No(bp), port_No(port), port->overrun);
-#endif
-#ifdef RC_REPORT_FIFO
-	{
-		int i;
-
-		printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
-		       board_No(bp), port_No(port));
-		for (i = 0; i < 10; i++)
-			printk("%ld ", port->hits[i]);
-		printk("].\n");
-	}
-#endif
-	tty_port_free_xmit_buf(&port->port);
-
-	/* Select port */
-	rc_out(bp, CD180_CAR, port_No(port));
-	/* Reset port */
-	rc_wait_CCR(bp);
-	rc_out(bp, CD180_CCR, CCR_SOFTRESET);
-	/* Disable all interrupts from this port */
-	port->IER = 0;
-	rc_out(bp, CD180_IER, port->IER);
-
-	set_bit(TTY_IO_ERROR, &tty->flags);
-
-	if (--bp->count < 0)  {
-		printk(KERN_INFO "rc%d: rc_shutdown_port: "
-				 "bad board count: %d\n",
-		       board_No(bp), bp->count);
-		bp->count = 0;
-	}
-	/*
-	 * If this is the last opened port on the board
-	 * shutdown whole board
-	 */
-	if (!bp->count)
-		rc_shutdown_board(bp);
-}
-
-static int carrier_raised(struct tty_port *port)
-{
-	struct riscom_port *p = container_of(port, struct riscom_port, port);
-	struct riscom_board *bp = port_Board(p);
-	unsigned long flags;
-	int CD;
-	
-	spin_lock_irqsave(&riscom_lock, flags);
-	rc_out(bp, CD180_CAR, port_No(p));
-	CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
-	rc_out(bp, CD180_MSVR, MSVR_RTS);
-	bp->DTR &= ~(1u << port_No(p));
-	rc_out(bp, RC_DTR, bp->DTR);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-	return CD;
-}
-
-static void dtr_rts(struct tty_port *port, int onoff)
-{
-	struct riscom_port *p = container_of(port, struct riscom_port, port);
-	struct riscom_board *bp = port_Board(p);
-	unsigned long flags;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	bp->DTR &= ~(1u << port_No(p));
-	if (onoff == 0)
-		bp->DTR |= (1u << port_No(p));
-	rc_out(bp, RC_DTR, bp->DTR);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static int rc_open(struct tty_struct *tty, struct file *filp)
-{
-	int board;
-	int error;
-	struct riscom_port *port;
-	struct riscom_board *bp;
-
-	board = RC_BOARD(tty->index);
-	if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
-		return -ENODEV;
-
-	bp = &rc_board[board];
-	port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
-	if (rc_paranoia_check(port, tty->name, "rc_open"))
-		return -ENODEV;
-
-	error = rc_setup_board(bp);
-	if (error)
-		return error;
-
-	tty->driver_data = port;
-	return tty_port_open(&port->port, tty, filp);
-}
-
-static void rc_flush_buffer(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
-		return;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	spin_unlock_irqrestore(&riscom_lock, flags);
-
-	tty_wakeup(tty);
-}
-
-static void rc_close_port(struct tty_port *port)
-{
-	unsigned long flags;
-	struct riscom_port *rp = container_of(port, struct riscom_port, port);
-	struct riscom_board *bp = port_Board(rp);
-	unsigned long timeout;
-	
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	rp->IER &= ~IER_RXD;
-
-	rp->IER &= ~IER_TXRDY;
-	rp->IER |= IER_TXEMPTY;
-	rc_out(bp, CD180_CAR, port_No(rp));
-	rc_out(bp, CD180_IER, rp->IER);
-	/*
-	 * Before we drop DTR, make sure the UART transmitter
-	 * has completely drained; this is especially
-	 * important if there is a transmit FIFO!
-	 */
-	timeout = jiffies + HZ;
-	while (rp->IER & IER_TXEMPTY) {
-		spin_unlock_irqrestore(&riscom_lock, flags);
-		msleep_interruptible(jiffies_to_msecs(rp->timeout));
-		spin_lock_irqsave(&riscom_lock, flags);
-		if (time_after(jiffies, timeout))
-			break;
-	}
-	rc_shutdown_port(port->tty, bp, rp);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_close(struct tty_struct *tty, struct file *filp)
-{
-	struct riscom_port *port = tty->driver_data;
-
-	if (!port || rc_paranoia_check(port, tty->name, "close"))
-		return;
-	tty_port_close(&port->port, tty, filp);
-}
-
-static int rc_write(struct tty_struct *tty,
-		    const unsigned char *buf, int count)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	int c, total = 0;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_write"))
-		return 0;
-
-	bp = port_Board(port);
-
-	while (1) {
-		spin_lock_irqsave(&riscom_lock, flags);
-
-		c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
-					  SERIAL_XMIT_SIZE - port->xmit_head));
-		if (c <= 0)
-			break;	/* lock continues to be held */
-
-		memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
-		port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
-		port->xmit_cnt += c;
-
-		spin_unlock_irqrestore(&riscom_lock, flags);
-
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
-	    !(port->IER & IER_TXRDY)) {
-		port->IER |= IER_TXRDY;
-		rc_out(bp, CD180_CAR, port_No(port));
-		rc_out(bp, CD180_IER, port->IER);
-	}
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-
-	return total;
-}
-
-static int rc_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct riscom_port *port = tty->driver_data;
-	unsigned long flags;
-	int ret = 0;
-
-	if (rc_paranoia_check(port, tty->name, "rc_put_char"))
-		return 0;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
-		goto out;
-
-	port->port.xmit_buf[port->xmit_head++] = ch;
-	port->xmit_head &= SERIAL_XMIT_SIZE - 1;
-	port->xmit_cnt++;
-	ret = 1;
-
-out:
-	spin_unlock_irqrestore(&riscom_lock, flags);
-	return ret;
-}
-
-static void rc_flush_chars(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
-		return;
-
-	if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
-		return;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	port->IER |= IER_TXRDY;
-	rc_out(port_Board(port), CD180_CAR, port_No(port));
-	rc_out(port_Board(port), CD180_IER, port->IER);
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static int rc_write_room(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	int	ret;
-
-	if (rc_paranoia_check(port, tty->name, "rc_write_room"))
-		return 0;
-
-	ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
-}
-
-static int rc_chars_in_buffer(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-
-	if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
-		return 0;
-
-	return port->xmit_cnt;
-}
-
-static int rc_tiocmget(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned char status;
-	unsigned int result;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, __func__))
-		return -ENODEV;
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	rc_out(bp, CD180_CAR, port_No(port));
-	status = rc_in(bp, CD180_MSVR);
-	result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-
-	result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
-		| ((status & MSVR_DTR) ? TIOCM_DTR : 0)
-		| ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-		| ((status & MSVR_DSR) ? TIOCM_DSR : 0)
-		| ((status & MSVR_CTS) ? TIOCM_CTS : 0);
-	return result;
-}
-
-static int rc_tiocmset(struct tty_struct *tty,
-				       unsigned int set, unsigned int clear)
-{
-	struct riscom_port *port = tty->driver_data;
-	unsigned long flags;
-	struct riscom_board *bp;
-
-	if (rc_paranoia_check(port, tty->name, __func__))
-		return -ENODEV;
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	if (set & TIOCM_RTS)
-		port->MSVR |= MSVR_RTS;
-	if (set & TIOCM_DTR)
-		bp->DTR &= ~(1u << port_No(port));
-
-	if (clear & TIOCM_RTS)
-		port->MSVR &= ~MSVR_RTS;
-	if (clear & TIOCM_DTR)
-		bp->DTR |= (1u << port_No(port));
-
-	rc_out(bp, CD180_CAR, port_No(port));
-	rc_out(bp, CD180_MSVR, port->MSVR);
-	rc_out(bp, RC_DTR, bp->DTR);
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-
-	return 0;
-}
-
-static int rc_send_break(struct tty_struct *tty, int length)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp = port_Board(port);
-	unsigned long flags;
-
-	if (length == 0 || length == -1)
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	port->break_length = RISCOM_TPS / HZ * length;
-	port->COR2 |= COR2_ETC;
-	port->IER  |= IER_TXRDY;
-	rc_out(bp, CD180_CAR, port_No(port));
-	rc_out(bp, CD180_COR2, port->COR2);
-	rc_out(bp, CD180_IER, port->IER);
-	rc_wait_CCR(bp);
-	rc_out(bp, CD180_CCR, CCR_CORCHG2);
-	rc_wait_CCR(bp);
-
-	spin_unlock_irqrestore(&riscom_lock, flags);
-	return 0;
-}
-
-static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
-				     struct serial_struct __user *newinfo)
-{
-	struct serial_struct tmp;
-	struct riscom_board *bp = port_Board(port);
-	int change_speed;
-
-	if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
-		return -EFAULT;
-
-	mutex_lock(&port->port.mutex);
-	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
-			(tmp.flags & ASYNC_SPD_MASK));
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((tmp.close_delay != port->port.close_delay) ||
-		    (tmp.closing_wait != port->port.closing_wait) ||
-		    ((tmp.flags & ~ASYNC_USR_MASK) !=
-		     (port->port.flags & ~ASYNC_USR_MASK))) {
-			mutex_unlock(&port->port.mutex);
-			return -EPERM;
-		}
-		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
-			       (tmp.flags & ASYNC_USR_MASK));
-	} else  {
-		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
-			       (tmp.flags & ASYNC_FLAGS));
-		port->port.close_delay = tmp.close_delay;
-		port->port.closing_wait = tmp.closing_wait;
-	}
-	if (change_speed)  {
-		unsigned long flags;
-
-		spin_lock_irqsave(&riscom_lock, flags);
-		rc_change_speed(tty, bp, port);
-		spin_unlock_irqrestore(&riscom_lock, flags);
-	}
-	mutex_unlock(&port->port.mutex);
-	return 0;
-}
-
-static int rc_get_serial_info(struct riscom_port *port,
-				     struct serial_struct __user *retinfo)
-{
-	struct serial_struct tmp;
-	struct riscom_board *bp = port_Board(port);
-
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = PORT_CIRRUS;
-	tmp.line = port - rc_port;
-
-	mutex_lock(&port->port.mutex);
-	tmp.port = bp->base;
-	tmp.irq  = bp->irq;
-	tmp.flags = port->port.flags;
-	tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
-	tmp.close_delay = port->port.close_delay * HZ/100;
-	tmp.closing_wait = port->port.closing_wait * HZ/100;
-	mutex_unlock(&port->port.mutex);
-	tmp.xmit_fifo_size = CD180_NFIFO;
-	return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
-}
-
-static int rc_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	struct riscom_port *port = tty->driver_data;
-	void __user *argp = (void __user *)arg;
-	int retval;
-
-	if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
-		return -ENODEV;
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		retval = rc_get_serial_info(port, argp);
-		break;
-	case TIOCSSERIAL:
-		retval = rc_set_serial_info(tty, port, argp);
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-	}
-	return retval;
-}
-
-static void rc_throttle(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_throttle"))
-		return;
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	port->MSVR &= ~MSVR_RTS;
-	rc_out(bp, CD180_CAR, port_No(port));
-	if (I_IXOFF(tty)) {
-		rc_wait_CCR(bp);
-		rc_out(bp, CD180_CCR, CCR_SSCH2);
-		rc_wait_CCR(bp);
-	}
-	rc_out(bp, CD180_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_unthrottle(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
-		return;
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	port->MSVR |= MSVR_RTS;
-	rc_out(bp, CD180_CAR, port_No(port));
-	if (I_IXOFF(tty))  {
-		rc_wait_CCR(bp);
-		rc_out(bp, CD180_CCR, CCR_SSCH1);
-		rc_wait_CCR(bp);
-	}
-	rc_out(bp, CD180_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_stop(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_stop"))
-		return;
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	port->IER &= ~IER_TXRDY;
-	rc_out(bp, CD180_CAR, port_No(port));
-	rc_out(bp, CD180_IER, port->IER);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_start(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_start"))
-		return;
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&riscom_lock, flags);
-
-	if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
-		port->IER |= IER_TXRDY;
-		rc_out(bp, CD180_CAR, port_No(port));
-		rc_out(bp, CD180_IER, port->IER);
-	}
-	spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_hangup(struct tty_struct *tty)
-{
-	struct riscom_port *port = tty->driver_data;
-
-	if (rc_paranoia_check(port, tty->name, "rc_hangup"))
-		return;
-
-	tty_port_hangup(&port->port);
-}
-
-static void rc_set_termios(struct tty_struct *tty,
-					struct ktermios *old_termios)
-{
-	struct riscom_port *port = tty->driver_data;
-	unsigned long flags;
-
-	if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
-		return;
-
-	spin_lock_irqsave(&riscom_lock, flags);
-	rc_change_speed(tty, port_Board(port), port);
-	spin_unlock_irqrestore(&riscom_lock, flags);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		rc_start(tty);
-	}
-}
-
-static const struct tty_operations riscom_ops = {
-	.open  = rc_open,
-	.close = rc_close,
-	.write = rc_write,
-	.put_char = rc_put_char,
-	.flush_chars = rc_flush_chars,
-	.write_room = rc_write_room,
-	.chars_in_buffer = rc_chars_in_buffer,
-	.flush_buffer = rc_flush_buffer,
-	.ioctl = rc_ioctl,
-	.throttle = rc_throttle,
-	.unthrottle = rc_unthrottle,
-	.set_termios = rc_set_termios,
-	.stop = rc_stop,
-	.start = rc_start,
-	.hangup = rc_hangup,
-	.tiocmget = rc_tiocmget,
-	.tiocmset = rc_tiocmset,
-	.break_ctl = rc_send_break,
-};
-
-static const struct tty_port_operations riscom_port_ops = {
-	.carrier_raised = carrier_raised,
-	.dtr_rts = dtr_rts,
-	.shutdown = rc_close_port,
-	.activate = rc_activate_port,
-};
-
-
-static int __init rc_init_drivers(void)
-{
-	int error;
-	int i;
-
-	riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
-	if (!riscom_driver)
-		return -ENOMEM;
-
-	riscom_driver->owner = THIS_MODULE;
-	riscom_driver->name = "ttyL";
-	riscom_driver->major = RISCOM8_NORMAL_MAJOR;
-	riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	riscom_driver->subtype = SERIAL_TYPE_NORMAL;
-	riscom_driver->init_termios = tty_std_termios;
-	riscom_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	riscom_driver->init_termios.c_ispeed = 9600;
-	riscom_driver->init_termios.c_ospeed = 9600;
-	riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
-	tty_set_operations(riscom_driver, &riscom_ops);
-	error = tty_register_driver(riscom_driver);
-	if (error != 0) {
-		put_tty_driver(riscom_driver);
-		printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
-				"error = %d\n", error);
-		return 1;
-	}
-	memset(rc_port, 0, sizeof(rc_port));
-	for (i = 0; i < RC_NPORT * RC_NBOARD; i++)  {
-		tty_port_init(&rc_port[i].port);
-		rc_port[i].port.ops = &riscom_port_ops;
-		rc_port[i].magic = RISCOM8_MAGIC;
-	}
-	return 0;
-}
-
-static void rc_release_drivers(void)
-{
-	tty_unregister_driver(riscom_driver);
-	put_tty_driver(riscom_driver);
-}
-
-#ifndef MODULE
-/*
- * Called at boot time.
- *
- * You can specify IO base for up to RC_NBOARD cards,
- * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
- * Note that there will be no probing at default
- * addresses in this case.
- *
- */
-static int __init riscom8_setup(char *str)
-{
-	int ints[RC_NBOARD];
-	int i;
-
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	for (i = 0; i < RC_NBOARD; i++) {
-		if (i < ints[0])
-			rc_board[i].base = ints[i+1];
-		else
-			rc_board[i].base = 0;
-	}
-	return 1;
-}
-
-__setup("riscom8=", riscom8_setup);
-#endif
-
-static char banner[] __initdata =
-	KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
-		  "1994-1996.\n";
-static char no_boards_msg[] __initdata =
-	KERN_INFO "rc: No RISCom/8 boards detected.\n";
-
-/*
- * This routine must be called by kernel at boot time
- */
-static int __init riscom8_init(void)
-{
-	int i;
-	int found = 0;
-
-	printk(banner);
-
-	if (rc_init_drivers())
-		return -EIO;
-
-	for (i = 0; i < RC_NBOARD; i++)
-		if (rc_board[i].base && !rc_probe(&rc_board[i]))
-			found++;
-	if (!found)  {
-		rc_release_drivers();
-		printk(no_boards_msg);
-		return -EIO;
-	}
-	return 0;
-}
-
-#ifdef MODULE
-static int iobase;
-static int iobase1;
-static int iobase2;
-static int iobase3;
-module_param(iobase, int, 0);
-module_param(iobase1, int, 0);
-module_param(iobase2, int, 0);
-module_param(iobase3, int, 0);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR);
-#endif /* MODULE */
-
-/*
- * You can setup up to 4 boards (current value of RC_NBOARD)
- * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
- *
- */
-static int __init riscom8_init_module(void)
-{
-#ifdef MODULE
-	int i;
-
-	if (iobase || iobase1 || iobase2 || iobase3) {
-		for (i = 0; i < RC_NBOARD; i++)
-			rc_board[i].base = 0;
-	}
-
-	if (iobase)
-		rc_board[0].base = iobase;
-	if (iobase1)
-		rc_board[1].base = iobase1;
-	if (iobase2)
-		rc_board[2].base = iobase2;
-	if (iobase3)
-		rc_board[3].base = iobase3;
-#endif /* MODULE */
-
-	return riscom8_init();
-}
-
-static void __exit riscom8_exit_module(void)
-{
-	int i;
-
-	rc_release_drivers();
-	for (i = 0; i < RC_NBOARD; i++)
-		if (rc_board[i].flags & RC_BOARD_PRESENT)
-			rc_release_io_range(&rc_board[i]);
-
-}
-
-module_init(riscom8_init_module);
-module_exit(riscom8_exit_module);
diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h
deleted file mode 100644
index c9876b3..0000000
--- a/drivers/char/riscom8.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *      linux/drivers/char/riscom8.h  -- RISCom/8 multiport serial driver.
- *
- *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *      This code is loosely based on the Linux serial driver, written by
- *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card 
- *      programming info was obtained from various drivers for other OSes 
- *	(FreeBSD, ISC, etc), but no source code from those drivers were 
- *	directly included in this driver.
- *
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_RISCOM8_H
-#define __LINUX_RISCOM8_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-#define RC_NBOARD		4
-/* NOTE: RISCom decoder recognizes 16 addresses... */
-#define RC_NPORT        	8  
-#define RC_BOARD(line)		(((line) >> 3) & 0x07)
-#define RC_PORT(line)		((line) & (RC_NPORT - 1))
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define RISCOM_TPS		4000
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define RISCOM_RXFIFO		6	/* Max. receiver FIFO size (1-8) */
-
-#define RISCOM8_MAGIC		0x0907
-
-#define RC_IOBASE1	0x220
-#define RC_IOBASE2	0x240
-#define RC_IOBASE3	0x250
-#define RC_IOBASE4	0x260
-
-struct riscom_board {
-	unsigned long   flags;
-	unsigned short	base;
-	unsigned char 	irq;
-	signed   char	count;
-	unsigned char	DTR;
-};
-
-#define RC_BOARD_PRESENT	0x00000001
-#define RC_BOARD_ACTIVE		0x00000002
-	
-struct riscom_port {
-	int			magic;
-	struct			tty_port port;
-	int			baud_base;
-	int			timeout;
-	int			custom_divisor;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	short			wakeup_chars;
-	short			break_length;
-	unsigned char		mark_mask;
-	unsigned char		IER;
-	unsigned char		MSVR;
-	unsigned char		COR2;
-#ifdef RC_REPORT_OVERRUN
-	unsigned long		overrun;
-#endif	
-#ifdef RC_REPORT_FIFO
-	unsigned long		hits[10];
-#endif
-};
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_RISCOM8_H */
diff --git a/drivers/char/riscom8_reg.h b/drivers/char/riscom8_reg.h
deleted file mode 100644
index a32475e..0000000
--- a/drivers/char/riscom8_reg.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- *      linux/drivers/char/riscom8_reg.h  -- RISCom/8 multiport serial driver.
- */
-
-/*
- * Definitions for RISCom/8 Async Mux card by SDL Communications, Inc.
- */
-
-/*
- * Address mapping between Cirrus Logic CD180 chip internal registers
- * and ISA port addresses:
- *
- *      CL-CD180                A6  A5   A4  A3                      A2 A1 A0
- *      ISA             A15 A14 A13 A12  A11 A10 A9 A8  A7 A6 A5 A4  A3 A2 A1 A0
- */
-#define RC_TO_ISA(r)    ((((r)&0x07)<<1) | (((r)&~0x07)<<7))
-
-
-/* RISCom/8 On-Board Registers (assuming address translation) */
-
-#define RC_RI           0x100   /* Ring Indicator Register (R/O)           */
-#define RC_DTR          0x100   /* DTR Register (W/O)                      */
-#define RC_BSR          0x101   /* Board Status Register (R/O)             */
-#define RC_CTOUT        0x101   /* Clear Timeout (W/O)                     */
-
-
-/* Board Status Register */
-
-#define RC_BSR_TOUT     0x08     /* Hardware Timeout                       */
-#define RC_BSR_RINT     0x04     /* Receiver Interrupt                     */
-#define RC_BSR_TINT     0x02     /* Transmitter Interrupt                  */
-#define RC_BSR_MINT     0x01     /* Modem Ctl Interrupt                    */
-
-
-/* On-board oscillator frequency (in Hz) */
-#define RC_OSCFREQ      9830400
-
-/* Values of choice for Interrupt ACKs */
-#define RC_ACK_MINT     0x81    /* goes to PILR1                           */
-#define RC_ACK_RINT     0x82    /* goes to PILR3                           */
-#define RC_ACK_TINT     0x84    /* goes to PILR2                           */
-
-/* Chip ID (sorry, only one chip now) */
-#define RC_ID           0x10
-
-/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */
- 
-#define CD180_NCH       8       /* Total number of channels                */
-#define CD180_TPC       16      /* Ticks per character                     */
-#define CD180_NFIFO	8	/* TX FIFO size                            */
-
-
-/* Global registers */
-
-#define CD180_GIVR      0x40    /* Global Interrupt Vector Register        */
-#define CD180_GICR      0x41    /* Global Interrupting Channel Register    */
-#define CD180_PILR1     0x61    /* Priority Interrupt Level Register 1     */
-#define CD180_PILR2     0x62    /* Priority Interrupt Level Register 2     */
-#define CD180_PILR3     0x63    /* Priority Interrupt Level Register 3     */
-#define CD180_CAR       0x64    /* Channel Access Register                 */
-#define CD180_GFRCR     0x6b    /* Global Firmware Revision Code Register  */
-#define CD180_PPRH      0x70    /* Prescaler Period Register High          */
-#define CD180_PPRL      0x71    /* Prescaler Period Register Low           */
-#define CD180_RDR       0x78    /* Receiver Data Register                  */
-#define CD180_RCSR      0x7a    /* Receiver Character Status Register      */
-#define CD180_TDR       0x7b    /* Transmit Data Register                  */
-#define CD180_EOIR      0x7f    /* End of Interrupt Register               */
-
-
-/* Channel Registers */
-
-#define CD180_CCR       0x01    /* Channel Command Register                */
-#define CD180_IER       0x02    /* Interrupt Enable Register               */
-#define CD180_COR1      0x03    /* Channel Option Register 1               */
-#define CD180_COR2      0x04    /* Channel Option Register 2               */
-#define CD180_COR3      0x05    /* Channel Option Register 3               */
-#define CD180_CCSR      0x06    /* Channel Control Status Register         */
-#define CD180_RDCR      0x07    /* Receive Data Count Register             */
-#define CD180_SCHR1     0x09    /* Special Character Register 1            */
-#define CD180_SCHR2     0x0a    /* Special Character Register 2            */
-#define CD180_SCHR3     0x0b    /* Special Character Register 3            */
-#define CD180_SCHR4     0x0c    /* Special Character Register 4            */
-#define CD180_MCOR1     0x10    /* Modem Change Option 1 Register          */
-#define CD180_MCOR2     0x11    /* Modem Change Option 2 Register          */
-#define CD180_MCR       0x12    /* Modem Change Register                   */
-#define CD180_RTPR      0x18    /* Receive Timeout Period Register         */
-#define CD180_MSVR      0x28    /* Modem Signal Value Register             */
-#define CD180_RBPRH     0x31    /* Receive Baud Rate Period Register High  */
-#define CD180_RBPRL     0x32    /* Receive Baud Rate Period Register Low   */
-#define CD180_TBPRH     0x39    /* Transmit Baud Rate Period Register High */
-#define CD180_TBPRL     0x3a    /* Transmit Baud Rate Period Register Low  */
-
-
-/* Global Interrupt Vector Register (R/W) */
-
-#define GIVR_ITMASK     0x07     /* Interrupt type mask                     */
-#define  GIVR_IT_MODEM   0x01    /* Modem Signal Change Interrupt           */
-#define  GIVR_IT_TX      0x02    /* Transmit Data Interrupt                 */
-#define  GIVR_IT_RCV     0x03    /* Receive Good Data Interrupt             */
-#define  GIVR_IT_REXC    0x07    /* Receive Exception Interrupt             */
-
-
-/* Global Interrupt Channel Register (R/W) */
- 
-#define GICR_CHAN       0x1c    /* Channel Number Mask                     */
-#define GICR_CHAN_OFF   2       /* Channel Number Offset                   */
-
-
-/* Channel Address Register (R/W) */
-
-#define CAR_CHAN        0x07    /* Channel Number Mask                     */
-#define CAR_A7          0x08    /* A7 Address Extension (unused)           */
-
-
-/* Receive Character Status Register (R/O) */
-
-#define RCSR_TOUT       0x80    /* Rx Timeout                              */
-#define RCSR_SCDET      0x70    /* Special Character Detected Mask         */
-#define  RCSR_NO_SC      0x00   /* No Special Characters Detected          */
-#define  RCSR_SC_1       0x10   /* Special Char 1 (or 1 & 3) Detected      */
-#define  RCSR_SC_2       0x20   /* Special Char 2 (or 2 & 4) Detected      */
-#define  RCSR_SC_3       0x30   /* Special Char 3 Detected                 */
-#define  RCSR_SC_4       0x40   /* Special Char 4 Detected                 */
-#define RCSR_BREAK      0x08    /* Break has been detected                 */
-#define RCSR_PE         0x04    /* Parity Error                            */
-#define RCSR_FE         0x02    /* Frame Error                             */
-#define RCSR_OE         0x01    /* Overrun Error                           */
-
-
-/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
-
-#define CCR_HARDRESET   0x81    /* Reset the chip                          */
-
-#define CCR_SOFTRESET   0x80    /* Soft Channel Reset                      */
-
-#define CCR_CORCHG1     0x42    /* Channel Option Register 1 Changed       */
-#define CCR_CORCHG2     0x44    /* Channel Option Register 2 Changed       */
-#define CCR_CORCHG3     0x48    /* Channel Option Register 3 Changed       */
-
-#define CCR_SSCH1       0x21    /* Send Special Character 1                */
-
-#define CCR_SSCH2       0x22    /* Send Special Character 2                */
-
-#define CCR_SSCH3       0x23    /* Send Special Character 3                */
-
-#define CCR_SSCH4       0x24    /* Send Special Character 4                */
-
-#define CCR_TXEN        0x18    /* Enable Transmitter                      */
-#define CCR_RXEN        0x12    /* Enable Receiver                         */
-
-#define CCR_TXDIS       0x14    /* Disable Transmitter                     */
-#define CCR_RXDIS       0x11    /* Disable Receiver                        */
-
-
-/* Interrupt Enable Register (R/W) */
-
-#define IER_DSR         0x80    /* Enable interrupt on DSR change          */
-#define IER_CD          0x40    /* Enable interrupt on CD change           */
-#define IER_CTS         0x20    /* Enable interrupt on CTS change          */
-#define IER_RXD         0x10    /* Enable interrupt on Receive Data        */
-#define IER_RXSC        0x08    /* Enable interrupt on Receive Spec. Char  */
-#define IER_TXRDY       0x04    /* Enable interrupt on TX FIFO empty       */
-#define IER_TXEMPTY     0x02    /* Enable interrupt on TX completely empty */
-#define IER_RET         0x01    /* Enable interrupt on RX Exc. Timeout     */
-
-
-/* Channel Option Register 1 (R/W) */
-
-#define COR1_ODDP       0x80    /* Odd Parity                              */
-#define COR1_PARMODE    0x60    /* Parity Mode mask                        */
-#define  COR1_NOPAR      0x00   /* No Parity                               */
-#define  COR1_FORCEPAR   0x20   /* Force Parity                            */
-#define  COR1_NORMPAR    0x40   /* Normal Parity                           */
-#define COR1_IGNORE     0x10    /* Ignore Parity on RX                     */
-#define COR1_STOPBITS   0x0c    /* Number of Stop Bits                     */
-#define  COR1_1SB        0x00   /* 1 Stop Bit                              */
-#define  COR1_15SB       0x04   /* 1.5 Stop Bits                           */
-#define  COR1_2SB        0x08   /* 2 Stop Bits                             */
-#define COR1_CHARLEN    0x03    /* Character Length                        */
-#define  COR1_5BITS      0x00   /* 5 bits                                  */
-#define  COR1_6BITS      0x01   /* 6 bits                                  */
-#define  COR1_7BITS      0x02   /* 7 bits                                  */
-#define  COR1_8BITS      0x03   /* 8 bits                                  */
-
-
-/* Channel Option Register 2 (R/W) */
-
-#define COR2_IXM        0x80    /* Implied XON mode                        */
-#define COR2_TXIBE      0x40    /* Enable In-Band (XON/XOFF) Flow Control  */
-#define COR2_ETC        0x20    /* Embedded Tx Commands Enable             */
-#define COR2_LLM        0x10    /* Local Loopback Mode                     */
-#define COR2_RLM        0x08    /* Remote Loopback Mode                    */
-#define COR2_RTSAO      0x04    /* RTS Automatic Output Enable             */
-#define COR2_CTSAE      0x02    /* CTS Automatic Enable                    */
-#define COR2_DSRAE      0x01    /* DSR Automatic Enable                    */
-
-
-/* Channel Option Register 3 (R/W) */
-
-#define COR3_XONCH      0x80    /* XON is a pair of characters (1 & 3)     */
-#define COR3_XOFFCH     0x40    /* XOFF is a pair of characters (2 & 4)    */
-#define COR3_FCT        0x20    /* Flow-Control Transparency Mode          */
-#define COR3_SCDE       0x10    /* Special Character Detection Enable      */
-#define COR3_RXTH       0x0f    /* RX FIFO Threshold value (1-8)           */
-
-
-/* Channel Control Status Register (R/O) */
-
-#define CCSR_RXEN       0x80    /* Receiver Enabled                        */
-#define CCSR_RXFLOFF    0x40    /* Receive Flow Off (XOFF was sent)        */
-#define CCSR_RXFLON     0x20    /* Receive Flow On (XON was sent)          */
-#define CCSR_TXEN       0x08    /* Transmitter Enabled                     */
-#define CCSR_TXFLOFF    0x04    /* Transmit Flow Off (got XOFF)            */
-#define CCSR_TXFLON     0x02    /* Transmit Flow On (got XON)              */
-
-
-/* Modem Change Option Register 1 (R/W) */
-
-#define MCOR1_DSRZD     0x80    /* Detect 0->1 transition of DSR           */
-#define MCOR1_CDZD      0x40    /* Detect 0->1 transition of CD            */
-#define MCOR1_CTSZD     0x20    /* Detect 0->1 transition of CTS           */
-#define MCOR1_DTRTH     0x0f    /* Auto DTR flow control Threshold (1-8)   */
-#define  MCOR1_NODTRFC   0x0     /* Automatic DTR flow control disabled     */
-
-
-/* Modem Change Option Register 2 (R/W) */
-
-#define MCOR2_DSROD     0x80    /* Detect 1->0 transition of DSR           */
-#define MCOR2_CDOD      0x40    /* Detect 1->0 transition of CD            */
-#define MCOR2_CTSOD     0x20    /* Detect 1->0 transition of CTS           */
-
-
-/* Modem Change Register (R/W) */
-
-#define MCR_DSRCHG      0x80    /* DSR Changed                             */
-#define MCR_CDCHG       0x40    /* CD Changed                              */
-#define MCR_CTSCHG      0x20    /* CTS Changed                             */
-
-
-/* Modem Signal Value Register (R/W) */
-
-#define MSVR_DSR        0x80    /* Current state of DSR input              */
-#define MSVR_CD         0x40    /* Current state of CD input               */
-#define MSVR_CTS        0x20    /* Current state of CTS input              */
-#define MSVR_DTR        0x02    /* Current state of DTR output             */
-#define MSVR_RTS        0x01    /* Current state of RTS output             */
-
-
-/* Escape characters */
-
-#define CD180_C_ESC     0x00    /* Escape character                        */
-#define CD180_C_SBRK    0x81    /* Start sending BREAK                     */
-#define CD180_C_DELAY   0x82    /* Delay output                            */
-#define CD180_C_EBRK    0x83    /* Stop sending BREAK                      */
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
deleted file mode 100644
index 674af69..0000000
--- a/drivers/char/serial167.c
+++ /dev/null
@@ -1,2489 +0,0 @@
-/*
- * linux/drivers/char/serial167.c
- *
- * Driver for MVME166/7 board serial ports, which are via a CD2401.
- * Based very much on cyclades.c.
- *
- * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * ==============================================================
- *
- * static char rcsid[] =
- * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $";
- *
- *  linux/kernel/cyclades.c
- *
- * Maintained by Marcio Saito (cyclades@netcom.com) and
- * Randolph Bentson (bentson@grieg.seaslug.org)
- *
- * Much of the design and some of the code came from serial.c
- * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
- * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
- * and then fixed as suggested by Michael K. Johnson 12/12/92.
- *
- * This version does not support shared irq's.
- *
- * $Log: cyclades.c,v $
- * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Changes:
- *
- * 200 lines of changes record removed - RGH 11-10-95, starting work on
- * converting this to drive serial ports on mvme166 (cd2401).
- *
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25
- * - get rid of verify_area
- * - use get_user to access memory from userspace in set_threshold,
- *   set_default_threshold and set_timeout
- * - don't use the panic function in serial167_init
- * - do resource release on failure on serial167_init
- * - include missing restore_flags in mvme167_serial_console_setup
- *
- * Kars de Jong <jongk@linux-m68k.org> - 2004/09/06
- * - replace bottom half handler with task queue handler
- */
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/tty.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/serial167.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/tty_flip.h>
-#include <linux/gfp.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/mvme16xhw.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/uaccess.h>
-#include <linux/init.h>
-
-#define SERIAL_PARANOIA_CHECK
-#undef  SERIAL_DEBUG_OPEN
-#undef  SERIAL_DEBUG_THROTTLE
-#undef  SERIAL_DEBUG_OTHER
-#undef  SERIAL_DEBUG_IO
-#undef  SERIAL_DEBUG_COUNT
-#undef  SERIAL_DEBUG_DTR
-#undef  CYCLOM_16Y_HACK
-#define  CYCLOM_ENABLE_MONITORING
-
-#define WAKEUP_CHARS 256
-
-#define STD_COM_FLAGS (0)
-
-static struct tty_driver *cy_serial_driver;
-extern int serial_console;
-static struct cyclades_port *serial_console_info = NULL;
-static unsigned int serial_console_cflag = 0;
-u_char initial_console_speed;
-
-/* Base address of cd2401 chip on mvme166/7 */
-
-#define BASE_ADDR (0xfff45000)
-#define pcc2chip	((volatile u_char *)0xfff42000)
-#define PccSCCMICR	0x1d
-#define PccSCCTICR	0x1e
-#define PccSCCRICR	0x1f
-#define PccTPIACKR	0x25
-#define PccRPIACKR	0x27
-#define PccIMLR		0x3f
-
-/* This is the per-port data structure */
-struct cyclades_port cy_port[] = {
-	/* CARD#  */
-	{-1},			/* ttyS0 */
-	{-1},			/* ttyS1 */
-	{-1},			/* ttyS2 */
-	{-1},			/* ttyS3 */
-};
-
-#define NR_PORTS        ARRAY_SIZE(cy_port)
-
-/*
- * This is used to look up the divisor speeds and the timeouts
- * We're normally limited to 15 distinct baud rates.  The extra
- * are accessed via settings in info->flags.
- *         0,     1,     2,     3,     4,     5,     6,     7,     8,     9,
- *        10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
- *                                                  HI            VHI
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
-	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
-	0
-};
-
-#if 0
-static char baud_co[] = {	/* 25 MHz clock option table */
-	/* value =>    00    01   02    03    04 */
-	/* divide by    8    32   128   512  2048 */
-	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
-	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static char baud_bpr[] = {	/* 25 MHz baud rate period table */
-	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
-	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
-};
-#endif
-
-/* I think 166 brd clocks 2401 at 20MHz.... */
-
-/* These values are written directly to tcor, and >> 5 for writing to rcor */
-static u_char baud_co[] = {	/* 20 MHz clock option table */
-	0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40,
-	0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* These values written directly to tbpr/rbpr */
-static u_char baud_bpr[] = {	/* 20 MHz baud rate period table */
-	0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81,
-	0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10
-};
-
-static u_char baud_cor4[] = {	/* receive threshold */
-	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
-	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07
-};
-
-static void shutdown(struct cyclades_port *);
-static int startup(struct cyclades_port *);
-static void cy_throttle(struct tty_struct *);
-static void cy_unthrottle(struct tty_struct *);
-static void config_setup(struct cyclades_port *);
-#ifdef CYCLOM_SHOW_STATUS
-static void show_status(int);
-#endif
-
-/*
- * I have my own version of udelay(), as it is needed when initialising
- * the chip, before the delay loop has been calibrated.  Should probably
- * reference one of the vmechip2 or pccchip2 counter for an accurate
- * delay, but this wild guess will do for now.
- */
-
-void my_udelay(long us)
-{
-	u_char x;
-	volatile u_char *p = &x;
-	int i;
-
-	while (us--)
-		for (i = 100; i; i--)
-			x |= *p;
-}
-
-static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
-		const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	if (!info) {
-		printk("Warning: null cyclades_port for (%s) in %s\n", name,
-				routine);
-		return 1;
-	}
-
-	if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
-		printk("Warning: cyclades_port out of range for (%s) in %s\n",
-				name, routine);
-		return 1;
-	}
-
-	if (info->magic != CYCLADES_MAGIC) {
-		printk("Warning: bad magic number for serial struct (%s) in "
-				"%s\n", name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}				/* serial_paranoia_check */
-
-#if 0
-/* The following diagnostic routines allow the driver to spew
-   information on the screen, even (especially!) during interrupts.
- */
-void SP(char *data)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	printk(KERN_EMERG "%s", data);
-	local_irq_restore(flags);
-}
-
-char scrn[2];
-void CP(char data)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	scrn[0] = data;
-	printk(KERN_EMERG "%c", scrn);
-	local_irq_restore(flags);
-}				/* CP */
-
-void CP1(int data)
-{
-	(data < 10) ? CP(data + '0') : CP(data + 'A' - 10);
-}				/* CP1 */
-void CP2(int data)
-{
-	CP1((data >> 4) & 0x0f);
-	CP1(data & 0x0f);
-}				/* CP2 */
-void CP4(int data)
-{
-	CP2((data >> 8) & 0xff);
-	CP2(data & 0xff);
-}				/* CP4 */
-void CP8(long data)
-{
-	CP4((data >> 16) & 0xffff);
-	CP4(data & 0xffff);
-}				/* CP8 */
-#endif
-
-/* This routine waits up to 1000 micro-seconds for the previous
-   command to the Cirrus chip to complete and then issues the
-   new command.  An error is returned if the previous command
-   didn't finish within the time limit.
- */
-u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd)
-{
-	unsigned long flags;
-	volatile int i;
-
-	local_irq_save(flags);
-	/* Check to see that the previous command has completed */
-	for (i = 0; i < 100; i++) {
-		if (base_addr[CyCCR] == 0) {
-			break;
-		}
-		my_udelay(10L);
-	}
-	/* if the CCR never cleared, the previous command
-	   didn't finish within the "reasonable time" */
-	if (i == 10) {
-		local_irq_restore(flags);
-		return (-1);
-	}
-
-	/* Issue the new command */
-	base_addr[CyCCR] = cmd;
-	local_irq_restore(flags);
-	return (0);
-}				/* write_cy_cmd */
-
-/* cy_start and cy_stop provide software output flow control as a
-   function of XON/XOFF, software CTS, and other such stuff. */
-
-static void cy_stop(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_stop %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_stop"))
-		return;
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) (channel);	/* index channel */
-	base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-	local_irq_restore(flags);
-}				/* cy_stop */
-
-static void cy_start(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_start %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_start"))
-		return;
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) (channel);
-	base_addr[CyIER] |= CyTxMpty;
-	local_irq_restore(flags);
-}				/* cy_start */
-
-/* The real interrupt service routines are called
-   whenever the card wants its hand held--chars
-   received, out buffer empty, modem change, etc.
- */
-static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
-{
-	struct tty_struct *tty;
-	struct cyclades_port *info;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	unsigned char err, rfoc;
-	int channel;
-	char data;
-
-	/* determine the channel and change to that context */
-	channel = (u_short) (base_addr[CyLICR] >> 2);
-	info = &cy_port[channel];
-	info->last_active = jiffies;
-
-	if ((err = base_addr[CyRISR]) & CyTIMEOUT) {
-		/* This is a receive timeout interrupt, ignore it */
-		base_addr[CyREOIR] = CyNOTRANS;
-		return IRQ_HANDLED;
-	}
-
-	/* Read a byte of data if there is any - assume the error
-	 * is associated with this character */
-
-	if ((rfoc = base_addr[CyRFOC]) != 0)
-		data = base_addr[CyRDR];
-	else
-		data = 0;
-
-	/* if there is nowhere to put the data, discard it */
-	if (info->tty == 0) {
-		base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
-		return IRQ_HANDLED;
-	} else {		/* there is an open port for this data */
-		tty = info->tty;
-		if (err & info->ignore_status_mask) {
-			base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
-			return IRQ_HANDLED;
-		}
-		if (tty_buffer_request_room(tty, 1) != 0) {
-			if (err & info->read_status_mask) {
-				if (err & CyBREAK) {
-					tty_insert_flip_char(tty, data,
-							     TTY_BREAK);
-					if (info->flags & ASYNC_SAK) {
-						do_SAK(tty);
-					}
-				} else if (err & CyFRAME) {
-					tty_insert_flip_char(tty, data,
-							     TTY_FRAME);
-				} else if (err & CyPARITY) {
-					tty_insert_flip_char(tty, data,
-							     TTY_PARITY);
-				} else if (err & CyOVERRUN) {
-					tty_insert_flip_char(tty, 0,
-							     TTY_OVERRUN);
-					/*
-					   If the flip buffer itself is
-					   overflowing, we still lose
-					   the next incoming character.
-					 */
-					if (tty_buffer_request_room(tty, 1) !=
-					    0) {
-						tty_insert_flip_char(tty, data,
-								     TTY_FRAME);
-					}
-					/* These two conditions may imply */
-					/* a normal read should be done. */
-					/* else if(data & CyTIMEOUT) */
-					/* else if(data & CySPECHAR) */
-				} else {
-					tty_insert_flip_char(tty, 0,
-							     TTY_NORMAL);
-				}
-			} else {
-				tty_insert_flip_char(tty, data, TTY_NORMAL);
-			}
-		} else {
-			/* there was a software buffer overrun
-			   and nothing could be done about it!!! */
-		}
-	}
-	tty_schedule_flip(tty);
-	/* end of service */
-	base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
-	return IRQ_HANDLED;
-}				/* cy_rxerr_interrupt */
-
-static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id)
-{
-	struct cyclades_port *info;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-	int mdm_change;
-	int mdm_status;
-
-	/* determine the channel and change to that context */
-	channel = (u_short) (base_addr[CyLICR] >> 2);
-	info = &cy_port[channel];
-	info->last_active = jiffies;
-
-	mdm_change = base_addr[CyMISR];
-	mdm_status = base_addr[CyMSVR1];
-
-	if (info->tty == 0) {	/* nowhere to put the data, ignore it */
-		;
-	} else {
-		if ((mdm_change & CyDCD)
-		    && (info->flags & ASYNC_CHECK_CD)) {
-			if (mdm_status & CyDCD) {
-/* CP('!'); */
-				wake_up_interruptible(&info->open_wait);
-			} else {
-/* CP('@'); */
-				tty_hangup(info->tty);
-				wake_up_interruptible(&info->open_wait);
-				info->flags &= ~ASYNC_NORMAL_ACTIVE;
-			}
-		}
-		if ((mdm_change & CyCTS)
-		    && (info->flags & ASYNC_CTS_FLOW)) {
-			if (info->tty->stopped) {
-				if (mdm_status & CyCTS) {
-					/* !!! cy_start isn't used because... */
-					info->tty->stopped = 0;
-					base_addr[CyIER] |= CyTxMpty;
-					tty_wakeup(info->tty);
-				}
-			} else {
-				if (!(mdm_status & CyCTS)) {
-					/* !!! cy_stop isn't used because... */
-					info->tty->stopped = 1;
-					base_addr[CyIER] &=
-					    ~(CyTxMpty | CyTxRdy);
-				}
-			}
-		}
-		if (mdm_status & CyDSR) {
-		}
-	}
-	base_addr[CyMEOIR] = 0;
-	return IRQ_HANDLED;
-}				/* cy_modem_interrupt */
-
-static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
-{
-	struct cyclades_port *info;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-	int char_count, saved_cnt;
-	int outch;
-
-	/* determine the channel and change to that context */
-	channel = (u_short) (base_addr[CyLICR] >> 2);
-
-	/* validate the port number (as configured and open) */
-	if ((channel < 0) || (NR_PORTS <= channel)) {
-		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-		base_addr[CyTEOIR] = CyNOTRANS;
-		return IRQ_HANDLED;
-	}
-	info = &cy_port[channel];
-	info->last_active = jiffies;
-	if (info->tty == 0) {
-		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-		base_addr[CyTEOIR] = CyNOTRANS;
-		return IRQ_HANDLED;
-	}
-
-	/* load the on-chip space available for outbound data */
-	saved_cnt = char_count = base_addr[CyTFTC];
-
-	if (info->x_char) {	/* send special char */
-		outch = info->x_char;
-		base_addr[CyTDR] = outch;
-		char_count--;
-		info->x_char = 0;
-	}
-
-	if (info->x_break) {
-		/*  The Cirrus chip requires the "Embedded Transmit
-		   Commands" of start break, delay, and end break
-		   sequences to be sent.  The duration of the
-		   break is given in TICs, which runs at HZ
-		   (typically 100) and the PPR runs at 200 Hz,
-		   so the delay is duration * 200/HZ, and thus a
-		   break can run from 1/100 sec to about 5/4 sec.
-		   Need to check these values - RGH 141095.
-		 */
-		base_addr[CyTDR] = 0;	/* start break */
-		base_addr[CyTDR] = 0x81;
-		base_addr[CyTDR] = 0;	/* delay a bit */
-		base_addr[CyTDR] = 0x82;
-		base_addr[CyTDR] = info->x_break * 200 / HZ;
-		base_addr[CyTDR] = 0;	/* terminate break */
-		base_addr[CyTDR] = 0x83;
-		char_count -= 7;
-		info->x_break = 0;
-	}
-
-	while (char_count > 0) {
-		if (!info->xmit_cnt) {
-			base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-			break;
-		}
-		if (info->xmit_buf == 0) {
-			base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-			break;
-		}
-		if (info->tty->stopped || info->tty->hw_stopped) {
-			base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
-			break;
-		}
-		/* Because the Embedded Transmit Commands have been
-		   enabled, we must check to see if the escape
-		   character, NULL, is being sent.  If it is, we
-		   must ensure that there is room for it to be
-		   doubled in the output stream.  Therefore we
-		   no longer advance the pointer when the character
-		   is fetched, but rather wait until after the check
-		   for a NULL output character. (This is necessary
-		   because there may not be room for the two chars
-		   needed to send a NULL.
-		 */
-		outch = info->xmit_buf[info->xmit_tail];
-		if (outch) {
-			info->xmit_cnt--;
-			info->xmit_tail = (info->xmit_tail + 1)
-			    & (PAGE_SIZE - 1);
-			base_addr[CyTDR] = outch;
-			char_count--;
-		} else {
-			if (char_count > 1) {
-				info->xmit_cnt--;
-				info->xmit_tail = (info->xmit_tail + 1)
-				    & (PAGE_SIZE - 1);
-				base_addr[CyTDR] = outch;
-				base_addr[CyTDR] = 0;
-				char_count--;
-				char_count--;
-			} else {
-				break;
-			}
-		}
-	}
-
-	if (info->xmit_cnt < WAKEUP_CHARS)
-		tty_wakeup(info->tty);
-
-	base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS;
-	return IRQ_HANDLED;
-}				/* cy_tx_interrupt */
-
-static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
-{
-	struct tty_struct *tty;
-	struct cyclades_port *info;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-	char data;
-	int char_count;
-	int save_cnt;
-
-	/* determine the channel and change to that context */
-	channel = (u_short) (base_addr[CyLICR] >> 2);
-	info = &cy_port[channel];
-	info->last_active = jiffies;
-	save_cnt = char_count = base_addr[CyRFOC];
-
-		/* if there is nowhere to put the data, discard it */
-	if (info->tty == 0) {
-		while (char_count--) {
-			data = base_addr[CyRDR];
-		}
-	} else {		/* there is an open port for this data */
-		tty = info->tty;
-		/* load # characters available from the chip */
-
-#ifdef CYCLOM_ENABLE_MONITORING
-		++info->mon.int_count;
-		info->mon.char_count += char_count;
-		if (char_count > info->mon.char_max)
-			info->mon.char_max = char_count;
-		info->mon.char_last = char_count;
-#endif
-		while (char_count--) {
-			data = base_addr[CyRDR];
-			tty_insert_flip_char(tty, data, TTY_NORMAL);
-#ifdef CYCLOM_16Y_HACK
-			udelay(10L);
-#endif
-		}
-		tty_schedule_flip(tty);
-	}
-	/* end of service */
-	base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS;
-	return IRQ_HANDLED;
-}				/* cy_rx_interrupt */
-
-/* This is called whenever a port becomes active;
-   interrupts are enabled and DTR & RTS are turned on.
- */
-static int startup(struct cyclades_port *info)
-{
-	unsigned long flags;
-	volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
-	int channel;
-
-	if (info->flags & ASYNC_INITIALIZED) {
-		return 0;
-	}
-
-	if (!info->type) {
-		if (info->tty) {
-			set_bit(TTY_IO_ERROR, &info->tty->flags);
-		}
-		return 0;
-	}
-	if (!info->xmit_buf) {
-		info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
-		if (!info->xmit_buf) {
-			return -ENOMEM;
-		}
-	}
-
-	config_setup(info);
-
-	channel = info->line;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("startup channel %d\n", channel);
-#endif
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) channel;
-	write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
-
-	base_addr[CyCAR] = (u_char) channel;	/* !!! Is this needed? */
-	base_addr[CyMSVR1] = CyRTS;
-/* CP('S');CP('1'); */
-	base_addr[CyMSVR2] = CyDTR;
-
-#ifdef SERIAL_DEBUG_DTR
-	printk("cyc: %d: raising DTR\n", __LINE__);
-	printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-	       base_addr[CyMSVR2]);
-#endif
-
-	base_addr[CyIER] |= CyRxData;
-	info->flags |= ASYNC_INITIALIZED;
-
-	if (info->tty) {
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
-	}
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	local_irq_restore(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk(" done\n");
-#endif
-	return 0;
-}				/* startup */
-
-void start_xmit(struct cyclades_port *info)
-{
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-
-	channel = info->line;
-	local_irq_save(flags);
-	base_addr[CyCAR] = channel;
-	base_addr[CyIER] |= CyTxMpty;
-	local_irq_restore(flags);
-}				/* start_xmit */
-
-/*
- * This routine shuts down a serial port; interrupts are disabled,
- * and DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct cyclades_port *info)
-{
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-
-	if (!(info->flags & ASYNC_INITIALIZED)) {
-/* CP('$'); */
-		return;
-	}
-
-	channel = info->line;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("shutdown channel %d\n", channel);
-#endif
-
-	/* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE
-	   SENT BEFORE DROPPING THE LINE !!!  (Perhaps
-	   set some flag that is read when XMTY happens.)
-	   Other choices are to delay some fixed interval
-	   or schedule some later processing.
-	 */
-	local_irq_save(flags);
-	if (info->xmit_buf) {
-		free_page((unsigned long)info->xmit_buf);
-		info->xmit_buf = NULL;
-	}
-
-	base_addr[CyCAR] = (u_char) channel;
-	if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
-		base_addr[CyMSVR1] = 0;
-/* CP('C');CP('1'); */
-		base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: dropping DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-	}
-	write_cy_cmd(base_addr, CyDIS_RCVR);
-	/* it may be appropriate to clear _XMIT at
-	   some later date (after testing)!!! */
-
-	if (info->tty) {
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-	}
-	info->flags &= ~ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk(" done\n");
-#endif
-}				/* shutdown */
-
-/*
- * This routine finds or computes the various line characteristics.
- */
-static void config_setup(struct cyclades_port *info)
-{
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-	unsigned cflag;
-	int i;
-	unsigned char ti, need_init_chan = 0;
-
-	if (!info->tty || !info->tty->termios) {
-		return;
-	}
-	if (info->line == -1) {
-		return;
-	}
-	cflag = info->tty->termios->c_cflag;
-
-	/* baud rate */
-	i = cflag & CBAUD;
-#ifdef CBAUDEX
-/* Starting with kernel 1.1.65, there is direct support for
-   higher baud rates.  The following code supports those
-   changes.  The conditional aspect allows this driver to be
-   used for earlier as well as later kernel versions.  (The
-   mapping is slightly different from serial.c because there
-   is still the possibility of supporting 75 kbit/sec with
-   the Cyclades board.)
- */
-	if (i & CBAUDEX) {
-		if (i == B57600)
-			i = 16;
-		else if (i == B115200)
-			i = 18;
-#ifdef B78600
-		else if (i == B78600)
-			i = 17;
-#endif
-		else
-			info->tty->termios->c_cflag &= ~CBAUDEX;
-	}
-#endif
-	if (i == 15) {
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			i += 1;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			i += 3;
-	}
-	/* Don't ever change the speed of the console port.  It will
-	 * run at the speed specified in bootinfo, or at 19.2K */
-	/* Actually, it should run at whatever speed 166Bug was using */
-	/* Note info->timeout isn't used at present */
-	if (info != serial_console_info) {
-		info->tbpr = baud_bpr[i];	/* Tx BPR */
-		info->tco = baud_co[i];	/* Tx CO */
-		info->rbpr = baud_bpr[i];	/* Rx BPR */
-		info->rco = baud_co[i] >> 5;	/* Rx CO */
-		if (baud_table[i] == 134) {
-			info->timeout =
-			    (info->xmit_fifo_size * HZ * 30 / 269) + 2;
-			/* get it right for 134.5 baud */
-		} else if (baud_table[i]) {
-			info->timeout =
-			    (info->xmit_fifo_size * HZ * 15 / baud_table[i]) +
-			    2;
-			/* this needs to be propagated into the card info */
-		} else {
-			info->timeout = 0;
-		}
-	}
-	/* By tradition (is it a standard?) a baud rate of zero
-	   implies the line should be/has been closed.  A bit
-	   later in this routine such a test is performed. */
-
-	/* byte size and parity */
-	info->cor7 = 0;
-	info->cor6 = 0;
-	info->cor5 = 0;
-	info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]);	/* receive threshold */
-	/* Following two lines added 101295, RGH. */
-	/* It is obviously wrong to access CyCORx, and not info->corx here,
-	 * try and remember to fix it later! */
-	channel = info->line;
-	base_addr[CyCAR] = (u_char) channel;
-	if (C_CLOCAL(info->tty)) {
-		if (base_addr[CyIER] & CyMdmCh)
-			base_addr[CyIER] &= ~CyMdmCh;	/* without modem intr */
-		/* ignore 1->0 modem transitions */
-		if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD))
-			base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD);
-		/* ignore 0->1 modem transitions */
-		if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD))
-			base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD);
-	} else {
-		if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh)
-			base_addr[CyIER] |= CyMdmCh;	/* with modem intr */
-		/* act on 1->0 modem transitions */
-		if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) !=
-		    (CyDSR | CyCTS | CyDCD))
-			base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD;
-		/* act on 0->1 modem transitions */
-		if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) !=
-		    (CyDSR | CyCTS | CyDCD))
-			base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD;
-	}
-	info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP;
-	info->cor2 = CyETC;
-	switch (cflag & CSIZE) {
-	case CS5:
-		info->cor1 = Cy_5_BITS;
-		break;
-	case CS6:
-		info->cor1 = Cy_6_BITS;
-		break;
-	case CS7:
-		info->cor1 = Cy_7_BITS;
-		break;
-	case CS8:
-		info->cor1 = Cy_8_BITS;
-		break;
-	}
-	if (cflag & PARENB) {
-		if (cflag & PARODD) {
-			info->cor1 |= CyPARITY_O;
-		} else {
-			info->cor1 |= CyPARITY_E;
-		}
-	} else {
-		info->cor1 |= CyPARITY_NONE;
-	}
-
-	/* CTS flow control flag */
-#if 0
-	/* Don't complcate matters for now! RGH 141095 */
-	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
-		info->cor2 |= CyCtsAE;
-	} else {
-		info->flags &= ~ASYNC_CTS_FLOW;
-		info->cor2 &= ~CyCtsAE;
-	}
-#endif
-	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
-	else
-		info->flags |= ASYNC_CHECK_CD;
-
-     /***********************************************
-	The hardware option, CyRtsAO, presents RTS when
-	the chip has characters to send.  Since most modems
-	use RTS as reverse (inbound) flow control, this
-	option is not used.  If inbound flow control is
-	necessary, DTR can be programmed to provide the
-	appropriate signals for use with a non-standard
-	cable.  Contact Marcio Saito for details.
-     ***********************************************/
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) channel;
-
-	/* CyCMR set once only in mvme167_init_serial() */
-	if (base_addr[CyLICR] != channel << 2)
-		base_addr[CyLICR] = channel << 2;
-	if (base_addr[CyLIVR] != 0x5c)
-		base_addr[CyLIVR] = 0x5c;
-
-	/* tx and rx baud rate */
-
-	if (base_addr[CyCOR1] != info->cor1)
-		need_init_chan = 1;
-	if (base_addr[CyTCOR] != info->tco)
-		base_addr[CyTCOR] = info->tco;
-	if (base_addr[CyTBPR] != info->tbpr)
-		base_addr[CyTBPR] = info->tbpr;
-	if (base_addr[CyRCOR] != info->rco)
-		base_addr[CyRCOR] = info->rco;
-	if (base_addr[CyRBPR] != info->rbpr)
-		base_addr[CyRBPR] = info->rbpr;
-
-	/* set line characteristics  according configuration */
-
-	if (base_addr[CySCHR1] != START_CHAR(info->tty))
-		base_addr[CySCHR1] = START_CHAR(info->tty);
-	if (base_addr[CySCHR2] != STOP_CHAR(info->tty))
-		base_addr[CySCHR2] = STOP_CHAR(info->tty);
-	if (base_addr[CySCRL] != START_CHAR(info->tty))
-		base_addr[CySCRL] = START_CHAR(info->tty);
-	if (base_addr[CySCRH] != START_CHAR(info->tty))
-		base_addr[CySCRH] = START_CHAR(info->tty);
-	if (base_addr[CyCOR1] != info->cor1)
-		base_addr[CyCOR1] = info->cor1;
-	if (base_addr[CyCOR2] != info->cor2)
-		base_addr[CyCOR2] = info->cor2;
-	if (base_addr[CyCOR3] != info->cor3)
-		base_addr[CyCOR3] = info->cor3;
-	if (base_addr[CyCOR4] != info->cor4)
-		base_addr[CyCOR4] = info->cor4;
-	if (base_addr[CyCOR5] != info->cor5)
-		base_addr[CyCOR5] = info->cor5;
-	if (base_addr[CyCOR6] != info->cor6)
-		base_addr[CyCOR6] = info->cor6;
-	if (base_addr[CyCOR7] != info->cor7)
-		base_addr[CyCOR7] = info->cor7;
-
-	if (need_init_chan)
-		write_cy_cmd(base_addr, CyINIT_CHAN);
-
-	base_addr[CyCAR] = (u_char) channel;	/* !!! Is this needed? */
-
-	/* 2ms default rx timeout */
-	ti = info->default_timeout ? info->default_timeout : 0x02;
-	if (base_addr[CyRTPRL] != ti)
-		base_addr[CyRTPRL] = ti;
-	if (base_addr[CyRTPRH] != 0)
-		base_addr[CyRTPRH] = 0;
-
-	/* Set up RTS here also ????? RGH 141095 */
-	if (i == 0) {		/* baud rate is zero, turn off line */
-		if ((base_addr[CyMSVR2] & CyDTR) == CyDTR)
-			base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: dropping DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-	} else {
-		if ((base_addr[CyMSVR2] & CyDTR) != CyDTR)
-			base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: raising DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-	}
-
-	if (info->tty) {
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
-	}
-
-	local_irq_restore(flags);
-
-}				/* config_setup */
-
-static int cy_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_put_char %s(0x%02x)\n", tty->name, ch);
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_put_char"))
-		return 0;
-
-	if (!info->xmit_buf)
-		return 0;
-
-	local_irq_save(flags);
-	if (info->xmit_cnt >= PAGE_SIZE - 1) {
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	info->xmit_buf[info->xmit_head++] = ch;
-	info->xmit_head &= PAGE_SIZE - 1;
-	info->xmit_cnt++;
-	local_irq_restore(flags);
-	return 1;
-}				/* cy_put_char */
-
-static void cy_flush_chars(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_flush_chars %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
-		return;
-
-	if (info->xmit_cnt <= 0 || tty->stopped
-	    || tty->hw_stopped || !info->xmit_buf)
-		return;
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = channel;
-	base_addr[CyIER] |= CyTxMpty;
-	local_irq_restore(flags);
-}				/* cy_flush_chars */
-
-/* This routine gets called when tty_write has put something into
-    the write_queue.  If the port is not already transmitting stuff,
-    start it off by enabling interrupts.  The interrupt service
-    routine will then ensure that the characters are sent.  If the
-    port is already active, there is no need to kick it.
- */
-static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-	int c, total = 0;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_write %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_write")) {
-		return 0;
-	}
-
-	if (!info->xmit_buf) {
-		return 0;
-	}
-
-	while (1) {
-		local_irq_save(flags);
-		c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-					  SERIAL_XMIT_SIZE - info->xmit_head));
-		if (c <= 0) {
-			local_irq_restore(flags);
-			break;
-		}
-
-		memcpy(info->xmit_buf + info->xmit_head, buf, c);
-		info->xmit_head =
-		    (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
-		info->xmit_cnt += c;
-		local_irq_restore(flags);
-
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
-		start_xmit(info);
-	}
-	return total;
-}				/* cy_write */
-
-static int cy_write_room(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	int ret;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_write_room %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_write_room"))
-		return 0;
-	ret = PAGE_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
-}				/* cy_write_room */
-
-static int cy_chars_in_buffer(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
-		return 0;
-
-	return info->xmit_cnt;
-}				/* cy_chars_in_buffer */
-
-static void cy_flush_buffer(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_IO
-	printk("cy_flush_buffer %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
-		return;
-	local_irq_save(flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	local_irq_restore(flags);
-	tty_wakeup(tty);
-}				/* cy_flush_buffer */
-
-/* This routine is called by the upper-layer tty layer to signal
-   that incoming characters should be throttled or that the
-   throttle should be released.
- */
-static void cy_throttle(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-
-#ifdef SERIAL_DEBUG_THROTTLE
-	char buf[64];
-
-	printk("throttle %s: %d....\n", tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-	printk("cy_throttle %s\n", tty->name);
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
-		return;
-	}
-
-	if (I_IXOFF(tty)) {
-		info->x_char = STOP_CHAR(tty);
-		/* Should use the "Send Special Character" feature!!! */
-	}
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) channel;
-	base_addr[CyMSVR1] = 0;
-	local_irq_restore(flags);
-}				/* cy_throttle */
-
-static void cy_unthrottle(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	unsigned long flags;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-
-#ifdef SERIAL_DEBUG_THROTTLE
-	char buf[64];
-
-	printk("throttle %s: %d....\n", tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-	printk("cy_unthrottle %s\n", tty->name);
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
-		return;
-	}
-
-	if (I_IXOFF(tty)) {
-		info->x_char = START_CHAR(tty);
-		/* Should use the "Send Special Character" feature!!! */
-	}
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) channel;
-	base_addr[CyMSVR1] = CyRTS;
-	local_irq_restore(flags);
-}				/* cy_unthrottle */
-
-static int
-get_serial_info(struct cyclades_port *info,
-		struct serial_struct __user * retinfo)
-{
-	struct serial_struct tmp;
-
-/* CP('g'); */
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = info->line;
-	tmp.irq = 0;
-	tmp.flags = info->flags;
-	tmp.baud_base = 0;	/*!!! */
-	tmp.close_delay = info->close_delay;
-	tmp.custom_divisor = 0;	/*!!! */
-	tmp.hub6 = 0;		/*!!! */
-	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-}				/* get_serial_info */
-
-static int
-set_serial_info(struct cyclades_port *info,
-		struct serial_struct __user * new_info)
-{
-	struct serial_struct new_serial;
-	struct cyclades_port old_info;
-
-/* CP('s'); */
-	if (!new_info)
-		return -EFAULT;
-	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
-		return -EFAULT;
-	old_info = *info;
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
-		     (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
-			return -EPERM;
-		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-			       (new_serial.flags & ASYNC_USR_MASK));
-		goto check_and_exit;
-	}
-
-	/*
-	 * OK, past this point, all the error checking has been done.
-	 * At this point, we start making changes.....
-	 */
-
-	info->flags = ((info->flags & ~ASYNC_FLAGS) |
-		       (new_serial.flags & ASYNC_FLAGS));
-	info->close_delay = new_serial.close_delay;
-
-check_and_exit:
-	if (info->flags & ASYNC_INITIALIZED) {
-		config_setup(info);
-		return 0;
-	}
-	return startup(info);
-}				/* set_serial_info */
-
-static int cy_tiocmget(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-	int channel;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	unsigned long flags;
-	unsigned char status;
-
-	channel = info->line;
-
-	local_irq_save(flags);
-	base_addr[CyCAR] = (u_char) channel;
-	status = base_addr[CyMSVR1] | base_addr[CyMSVR2];
-	local_irq_restore(flags);
-
-	return ((status & CyRTS) ? TIOCM_RTS : 0)
-	    | ((status & CyDTR) ? TIOCM_DTR : 0)
-	    | ((status & CyDCD) ? TIOCM_CAR : 0)
-	    | ((status & CyDSR) ? TIOCM_DSR : 0)
-	    | ((status & CyCTS) ? TIOCM_CTS : 0);
-}				/* cy_tiocmget */
-
-static int
-cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
-{
-	struct cyclades_port *info = tty->driver_data;
-	int channel;
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	unsigned long flags;
-
-	channel = info->line;
-
-	if (set & TIOCM_RTS) {
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-		base_addr[CyMSVR1] = CyRTS;
-		local_irq_restore(flags);
-	}
-	if (set & TIOCM_DTR) {
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-/* CP('S');CP('2'); */
-		base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: raising DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-		local_irq_restore(flags);
-	}
-
-	if (clear & TIOCM_RTS) {
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-		base_addr[CyMSVR1] = 0;
-		local_irq_restore(flags);
-	}
-	if (clear & TIOCM_DTR) {
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-/* CP('C');CP('2'); */
-		base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: dropping DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}				/* set_modem_info */
-
-static void send_break(struct cyclades_port *info, int duration)
-{				/* Let the transmit ISR take care of this (since it
-				   requires stuffing characters into the output stream).
-				 */
-	info->x_break = duration;
-	if (!info->xmit_cnt) {
-		start_xmit(info);
-	}
-}				/* send_break */
-
-static int
-get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
-{
-
-	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
-		return -EFAULT;
-	info->mon.int_count = 0;
-	info->mon.char_count = 0;
-	info->mon.char_max = 0;
-	info->mon.char_last = 0;
-	return 0;
-}
-
-static int set_threshold(struct cyclades_port *info, unsigned long __user * arg)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	unsigned long value;
-	int channel;
-
-	if (get_user(value, arg))
-		return -EFAULT;
-
-	channel = info->line;
-	info->cor4 &= ~CyREC_FIFO;
-	info->cor4 |= value & CyREC_FIFO;
-	base_addr[CyCOR4] = info->cor4;
-	return 0;
-}
-
-static int
-get_threshold(struct cyclades_port *info, unsigned long __user * value)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-	unsigned long tmp;
-
-	channel = info->line;
-
-	tmp = base_addr[CyCOR4] & CyREC_FIFO;
-	return put_user(tmp, value);
-}
-
-static int
-set_default_threshold(struct cyclades_port *info, unsigned long __user * arg)
-{
-	unsigned long value;
-
-	if (get_user(value, arg))
-		return -EFAULT;
-
-	info->default_threshold = value & 0x0f;
-	return 0;
-}
-
-static int
-get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
-{
-	return put_user(info->default_threshold, value);
-}
-
-static int set_timeout(struct cyclades_port *info, unsigned long __user * arg)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-	unsigned long value;
-
-	if (get_user(value, arg))
-		return -EFAULT;
-
-	channel = info->line;
-
-	base_addr[CyRTPRL] = value & 0xff;
-	base_addr[CyRTPRH] = (value >> 8) & 0xff;
-	return 0;
-}
-
-static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-	unsigned long tmp;
-
-	channel = info->line;
-
-	tmp = base_addr[CyRTPRL];
-	return put_user(tmp, value);
-}
-
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
-{
-	info->default_timeout = value & 0xff;
-	return 0;
-}
-
-static int
-get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
-{
-	return put_user(info->default_timeout, value);
-}
-
-static int
-cy_ioctl(struct tty_struct *tty,
-	 unsigned int cmd, unsigned long arg)
-{
-	struct cyclades_port *info = tty->driver_data;
-	int ret_val = 0;
-	void __user *argp = (void __user *)arg;
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg);	/* */
-#endif
-
-	tty_lock();
-
-	switch (cmd) {
-	case CYGETMON:
-		ret_val = get_mon_info(info, argp);
-		break;
-	case CYGETTHRESH:
-		ret_val = get_threshold(info, argp);
-		break;
-	case CYSETTHRESH:
-		ret_val = set_threshold(info, argp);
-		break;
-	case CYGETDEFTHRESH:
-		ret_val = get_default_threshold(info, argp);
-		break;
-	case CYSETDEFTHRESH:
-		ret_val = set_default_threshold(info, argp);
-		break;
-	case CYGETTIMEOUT:
-		ret_val = get_timeout(info, argp);
-		break;
-	case CYSETTIMEOUT:
-		ret_val = set_timeout(info, argp);
-		break;
-	case CYGETDEFTIMEOUT:
-		ret_val = get_default_timeout(info, argp);
-		break;
-	case CYSETDEFTIMEOUT:
-		ret_val = set_default_timeout(info, (unsigned long)arg);
-		break;
-	case TCSBRK:		/* SVID version: non-zero arg --> no break */
-		ret_val = tty_check_change(tty);
-		if (ret_val)
-			break;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			send_break(info, HZ / 4);	/* 1/4 second */
-		break;
-	case TCSBRKP:		/* support for POSIX tcsendbreak() */
-		ret_val = tty_check_change(tty);
-		if (ret_val)
-			break;
-		tty_wait_until_sent(tty, 0);
-		send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
-		break;
-
-/* The following commands are incompletely implemented!!! */
-	case TIOCGSERIAL:
-		ret_val = get_serial_info(info, argp);
-		break;
-	case TIOCSSERIAL:
-		ret_val = set_serial_info(info, argp);
-		break;
-	default:
-		ret_val = -ENOIOCTLCMD;
-	}
-	tty_unlock();
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_ioctl done\n");
-#endif
-
-	return ret_val;
-}				/* cy_ioctl */
-
-static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_set_termios %s\n", tty->name);
-#endif
-
-	if (tty->termios->c_cflag == old_termios->c_cflag)
-		return;
-	config_setup(info);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->stopped = 0;
-		cy_start(tty);
-	}
-#ifdef tytso_patch_94Nov25_1726
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->open_wait);
-#endif
-}				/* cy_set_termios */
-
-static void cy_close(struct tty_struct *tty, struct file *filp)
-{
-	struct cyclades_port *info = tty->driver_data;
-
-/* CP('C'); */
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_close %s\n", tty->name);
-#endif
-
-	if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
-		return;
-	}
-#ifdef SERIAL_DEBUG_OPEN
-	printk("cy_close %s, count = %d\n", tty->name, info->count);
-#endif
-
-	if ((tty->count == 1) && (info->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("cy_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
-	}
-#ifdef SERIAL_DEBUG_COUNT
-	printk("cyc: %d: decrementing count to %d\n", __LINE__,
-	       info->count - 1);
-#endif
-	if (--info->count < 0) {
-		printk("cy_close: bad serial port count for ttys%d: %d\n",
-		       info->line, info->count);
-#ifdef SERIAL_DEBUG_COUNT
-		printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
-		info->count = 0;
-	}
-	if (info->count)
-		return;
-	info->flags |= ASYNC_CLOSING;
-	if (info->flags & ASYNC_INITIALIZED)
-		tty_wait_until_sent(tty, 3000);	/* 30 seconds timeout */
-	shutdown(info);
-	cy_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	info->tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs
-					     (info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_close done\n");
-#endif
-}				/* cy_close */
-
-/*
- * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void cy_hangup(struct tty_struct *tty)
-{
-	struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_hangup %s\n", tty->name);	/* */
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "cy_hangup"))
-		return;
-
-	shutdown(info);
-#if 0
-	info->event = 0;
-	info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
-	printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
-	info->tty = 0;
-#endif
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	wake_up_interruptible(&info->open_wait);
-}				/* cy_hangup */
-
-/*
- * ------------------------------------------------------------
- * cy_open() and friends
- * ------------------------------------------------------------
- */
-
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
-		struct cyclades_port *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	int channel;
-	int retval;
-	volatile u_char *base_addr = (u_char *) BASE_ADDR;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-		if (info->flags & ASYNC_HUP_NOTIFY) {
-			return -EAGAIN;
-		} else {
-			return -ERESTARTSYS;
-		}
-	}
-
-	/*
-	 * If non-blocking mode is set, then make the check up front
-	 * and then exit.
-	 */
-	if (filp->f_flags & O_NONBLOCK) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * cy_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: %s, count = %d\n",
-	       tty->name, info->count);
-	/**/
-#endif
-	    info->count--;
-#ifdef SERIAL_DEBUG_COUNT
-	printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count);
-#endif
-	info->blocked_open++;
-
-	channel = info->line;
-
-	while (1) {
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-		base_addr[CyMSVR1] = CyRTS;
-/* CP('S');CP('4'); */
-		base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
-		printk("cyc: %d: raising DTR\n", __LINE__);
-		printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
-		       base_addr[CyMSVR2]);
-#endif
-		local_irq_restore(flags);
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp)
-		    || !(info->flags & ASYNC_INITIALIZED)) {
-			if (info->flags & ASYNC_HUP_NOTIFY) {
-				retval = -EAGAIN;
-			} else {
-				retval = -ERESTARTSYS;
-			}
-			break;
-		}
-		local_irq_save(flags);
-		base_addr[CyCAR] = (u_char) channel;
-/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */
-		if (!(info->flags & ASYNC_CLOSING)
-		    && (C_CLOCAL(tty)
-			|| (base_addr[CyMSVR1] & CyDCD))) {
-			local_irq_restore(flags);
-			break;
-		}
-		local_irq_restore(flags);
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: %s, count = %d\n",
-		       tty->name, info->count);
-		/**/
-#endif
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp)) {
-		info->count++;
-#ifdef SERIAL_DEBUG_COUNT
-		printk("cyc: %d: incrementing count to %d\n", __LINE__,
-		       info->count);
-#endif
-	}
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: %s, count = %d\n",
-	       tty->name, info->count);
-	/**/
-#endif
-	    if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}				/* block_til_ready */
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * performs the serial-specific initialization for the tty structure.
- */
-int cy_open(struct tty_struct *tty, struct file *filp)
-{
-	struct cyclades_port *info;
-	int retval, line;
-
-/* CP('O'); */
-	line = tty->index;
-	if ((line < 0) || (NR_PORTS <= line)) {
-		return -ENODEV;
-	}
-	info = &cy_port[line];
-	if (info->line < 0) {
-		return -ENODEV;
-	}
-#ifdef SERIAL_DEBUG_OTHER
-	printk("cy_open %s\n", tty->name);	/* */
-#endif
-	if (serial_paranoia_check(info, tty->name, "cy_open")) {
-		return -ENODEV;
-	}
-#ifdef SERIAL_DEBUG_OPEN
-	printk("cy_open %s, count = %d\n", tty->name, info->count);
-	/**/
-#endif
-	    info->count++;
-#ifdef SERIAL_DEBUG_COUNT
-	printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count);
-#endif
-	tty->driver_data = info;
-	info->tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval) {
-		return retval;
-	}
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("cy_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-#ifdef SERIAL_DEBUG_OPEN
-	printk("cy_open done\n");
-	/**/
-#endif
-	    return 0;
-}				/* cy_open */
-
-/*
- * ---------------------------------------------------------------------
- * serial167_init() and friends
- *
- * serial167_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static void show_version(void)
-{
-	printk("MVME166/167 cd2401 driver\n");
-}				/* show_version */
-
-/* initialize chips on card -- return number of valid
-   chips (which is number of ports/4) */
-
-/*
- * This initialises the hardware to a reasonable state.  It should
- * probe the chip first so as to copy 166-Bug setup as a default for
- * port 0.  It initialises CMR to CyASYNC; that is never done again, so
- * as to limit the number of CyINIT_CHAN commands in normal running.
- *
- * ... I wonder what I should do if this fails ...
- */
-
-void mvme167_serial_console_setup(int cflag)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int ch;
-	u_char spd;
-	u_char rcor, rbpr, badspeed = 0;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/*
-	 * First probe channel zero of the chip, to see what speed has
-	 * been selected.
-	 */
-
-	base_addr[CyCAR] = 0;
-
-	rcor = base_addr[CyRCOR] << 5;
-	rbpr = base_addr[CyRBPR];
-
-	for (spd = 0; spd < sizeof(baud_bpr); spd++)
-		if (rbpr == baud_bpr[spd] && rcor == baud_co[spd])
-			break;
-	if (spd >= sizeof(baud_bpr)) {
-		spd = 14;	/* 19200 */
-		badspeed = 1;	/* Failed to identify speed */
-	}
-	initial_console_speed = spd;
-
-	/* OK, we have chosen a speed, now reset and reinitialise */
-
-	my_udelay(20000L);	/* Allow time for any active o/p to complete */
-	if (base_addr[CyCCR] != 0x00) {
-		local_irq_restore(flags);
-		/* printk(" chip is never idle (CCR != 0)\n"); */
-		return;
-	}
-
-	base_addr[CyCCR] = CyCHIP_RESET;	/* Reset the chip */
-	my_udelay(1000L);
-
-	if (base_addr[CyGFRCR] == 0x00) {
-		local_irq_restore(flags);
-		/* printk(" chip is not responding (GFRCR stayed 0)\n"); */
-		return;
-	}
-
-	/*
-	 * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms
-	 * tick
-	 */
-
-	base_addr[CyTPR] = 10;
-
-	base_addr[CyPILR1] = 0x01;	/* Interrupt level for modem change */
-	base_addr[CyPILR2] = 0x02;	/* Interrupt level for tx ints */
-	base_addr[CyPILR3] = 0x03;	/* Interrupt level for rx ints */
-
-	/*
-	 * Attempt to set up all channels to something reasonable, and
-	 * bang out a INIT_CHAN command.  We should then be able to limit
-	 * the amount of fiddling we have to do in normal running.
-	 */
-
-	for (ch = 3; ch >= 0; ch--) {
-		base_addr[CyCAR] = (u_char) ch;
-		base_addr[CyIER] = 0;
-		base_addr[CyCMR] = CyASYNC;
-		base_addr[CyLICR] = (u_char) ch << 2;
-		base_addr[CyLIVR] = 0x5c;
-		base_addr[CyTCOR] = baud_co[spd];
-		base_addr[CyTBPR] = baud_bpr[spd];
-		base_addr[CyRCOR] = baud_co[spd] >> 5;
-		base_addr[CyRBPR] = baud_bpr[spd];
-		base_addr[CySCHR1] = 'Q' & 0x1f;
-		base_addr[CySCHR2] = 'X' & 0x1f;
-		base_addr[CySCRL] = 0;
-		base_addr[CySCRH] = 0;
-		base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
-		base_addr[CyCOR2] = 0;
-		base_addr[CyCOR3] = Cy_1_STOP;
-		base_addr[CyCOR4] = baud_cor4[spd];
-		base_addr[CyCOR5] = 0;
-		base_addr[CyCOR6] = 0;
-		base_addr[CyCOR7] = 0;
-		base_addr[CyRTPRL] = 2;
-		base_addr[CyRTPRH] = 0;
-		base_addr[CyMSVR1] = 0;
-		base_addr[CyMSVR2] = 0;
-		write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR);
-	}
-
-	/*
-	 * Now do specials for channel zero....
-	 */
-
-	base_addr[CyMSVR1] = CyRTS;
-	base_addr[CyMSVR2] = CyDTR;
-	base_addr[CyIER] = CyRxData;
-	write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
-
-	local_irq_restore(flags);
-
-	my_udelay(20000L);	/* Let it all settle down */
-
-	printk("CD2401 initialised,  chip is rev 0x%02x\n", base_addr[CyGFRCR]);
-	if (badspeed)
-		printk
-		    ("  WARNING:  Failed to identify line speed, rcor=%02x,rbpr=%02x\n",
-		     rcor >> 5, rbpr);
-}				/* serial_console_init */
-
-static const struct tty_operations cy_ops = {
-	.open = cy_open,
-	.close = cy_close,
-	.write = cy_write,
-	.put_char = cy_put_char,
-	.flush_chars = cy_flush_chars,
-	.write_room = cy_write_room,
-	.chars_in_buffer = cy_chars_in_buffer,
-	.flush_buffer = cy_flush_buffer,
-	.ioctl = cy_ioctl,
-	.throttle = cy_throttle,
-	.unthrottle = cy_unthrottle,
-	.set_termios = cy_set_termios,
-	.stop = cy_stop,
-	.start = cy_start,
-	.hangup = cy_hangup,
-	.tiocmget = cy_tiocmget,
-	.tiocmset = cy_tiocmset,
-};
-
-/* The serial driver boot-time initialization code!
-    Hardware I/O ports are mapped to character special devices on a
-    first found, first allocated manner.  That is, this code searches
-    for Cyclom cards in the system.  As each is found, it is probed
-    to discover how many chips (and thus how many ports) are present.
-    These ports are mapped to the tty ports 64 and upward in monotonic
-    fashion.  If an 8-port card is replaced with a 16-port card, the
-    port mapping on a following card will shift.
-
-    This approach is different from what is used in the other serial
-    device driver because the Cyclom is more properly a multiplexer,
-    not just an aggregation of serial ports on one card.
-
-    If there are more cards with more ports than have been statically
-    allocated above, a warning is printed and the extra ports are ignored.
- */
-static int __init serial167_init(void)
-{
-	struct cyclades_port *info;
-	int ret = 0;
-	int good_ports = 0;
-	int port_num = 0;
-	int index;
-	int DefSpeed;
-#ifdef notyet
-	struct sigaction sa;
-#endif
-
-	if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401))
-		return 0;
-
-	cy_serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!cy_serial_driver)
-		return -ENOMEM;
-
-#if 0
-	scrn[1] = '\0';
-#endif
-
-	show_version();
-
-	/* Has "console=0,9600n8" been used in bootinfo to change speed? */
-	if (serial_console_cflag)
-		DefSpeed = serial_console_cflag & 0017;
-	else {
-		DefSpeed = initial_console_speed;
-		serial_console_info = &cy_port[0];
-		serial_console_cflag = DefSpeed | CS8;
-#if 0
-		serial_console = 64;	/*callout_driver.minor_start */
-#endif
-	}
-
-	/* Initialize the tty_driver structure */
-
-	cy_serial_driver->owner = THIS_MODULE;
-	cy_serial_driver->name = "ttyS";
-	cy_serial_driver->major = TTY_MAJOR;
-	cy_serial_driver->minor_start = 64;
-	cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	cy_serial_driver->init_termios = tty_std_termios;
-	cy_serial_driver->init_termios.c_cflag =
-	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(cy_serial_driver, &cy_ops);
-
-	ret = tty_register_driver(cy_serial_driver);
-	if (ret) {
-		printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n");
-		put_tty_driver(cy_serial_driver);
-		return ret;
-	}
-
-	port_num = 0;
-	info = cy_port;
-	for (index = 0; index < 1; index++) {
-
-		good_ports = 4;
-
-		if (port_num < NR_PORTS) {
-			while (good_ports-- && port_num < NR_PORTS) {
-		/*** initialize port ***/
-				info->magic = CYCLADES_MAGIC;
-				info->type = PORT_CIRRUS;
-				info->card = index;
-				info->line = port_num;
-				info->flags = STD_COM_FLAGS;
-				info->tty = NULL;
-				info->xmit_fifo_size = 12;
-				info->cor1 = CyPARITY_NONE | Cy_8_BITS;
-				info->cor2 = CyETC;
-				info->cor3 = Cy_1_STOP;
-				info->cor4 = 0x08;	/* _very_ small receive threshold */
-				info->cor5 = 0;
-				info->cor6 = 0;
-				info->cor7 = 0;
-				info->tbpr = baud_bpr[DefSpeed];	/* Tx BPR */
-				info->tco = baud_co[DefSpeed];	/* Tx CO */
-				info->rbpr = baud_bpr[DefSpeed];	/* Rx BPR */
-				info->rco = baud_co[DefSpeed] >> 5;	/* Rx CO */
-				info->close_delay = 0;
-				info->x_char = 0;
-				info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
-				printk("cyc: %d: setting count to 0\n",
-				       __LINE__);
-#endif
-				info->blocked_open = 0;
-				info->default_threshold = 0;
-				info->default_timeout = 0;
-				init_waitqueue_head(&info->open_wait);
-				init_waitqueue_head(&info->close_wait);
-				/* info->session */
-				/* info->pgrp */
-/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/
-				info->read_status_mask =
-				    CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY |
-				    CyFRAME | CyOVERRUN;
-				/* info->timeout */
-
-				printk("ttyS%d ", info->line);
-				port_num++;
-				info++;
-				if (!(port_num & 7)) {
-					printk("\n               ");
-				}
-			}
-		}
-		printk("\n");
-	}
-	while (port_num < NR_PORTS) {
-		info->line = -1;
-		port_num++;
-		info++;
-	}
-
-	ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
-			  "cd2401_errors", cd2401_rxerr_interrupt);
-	if (ret) {
-		printk(KERN_ERR "Could't get cd2401_errors IRQ");
-		goto cleanup_serial_driver;
-	}
-
-	ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
-			  "cd2401_modem", cd2401_modem_interrupt);
-	if (ret) {
-		printk(KERN_ERR "Could't get cd2401_modem IRQ");
-		goto cleanup_irq_cd2401_errors;
-	}
-
-	ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
-			  "cd2401_txints", cd2401_tx_interrupt);
-	if (ret) {
-		printk(KERN_ERR "Could't get cd2401_txints IRQ");
-		goto cleanup_irq_cd2401_modem;
-	}
-
-	ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
-			  "cd2401_rxints", cd2401_rx_interrupt);
-	if (ret) {
-		printk(KERN_ERR "Could't get cd2401_rxints IRQ");
-		goto cleanup_irq_cd2401_txints;
-	}
-
-	/* Now we have registered the interrupt handlers, allow the interrupts */
-
-	pcc2chip[PccSCCMICR] = 0x15;	/* Serial ints are level 5 */
-	pcc2chip[PccSCCTICR] = 0x15;
-	pcc2chip[PccSCCRICR] = 0x15;
-
-	pcc2chip[PccIMLR] = 3;	/* Allow PCC2 ints above 3!? */
-
-	return 0;
-cleanup_irq_cd2401_txints:
-	free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt);
-cleanup_irq_cd2401_modem:
-	free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt);
-cleanup_irq_cd2401_errors:
-	free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt);
-cleanup_serial_driver:
-	if (tty_unregister_driver(cy_serial_driver))
-		printk(KERN_ERR
-		       "Couldn't unregister MVME166/7 serial driver\n");
-	put_tty_driver(cy_serial_driver);
-	return ret;
-}				/* serial167_init */
-
-module_init(serial167_init);
-
-#ifdef CYCLOM_SHOW_STATUS
-static void show_status(int line_num)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	int channel;
-	struct cyclades_port *info;
-	unsigned long flags;
-
-	info = &cy_port[line_num];
-	channel = info->line;
-	printk("  channel %d\n", channel);
-	/**/ printk(" cy_port\n");
-	printk("  card line flags = %d %d %x\n",
-	       info->card, info->line, info->flags);
-	printk
-	    ("  *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
-	     (long)info->tty, info->read_status_mask, info->timeout,
-	     info->xmit_fifo_size);
-	printk("  cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n",
-	       info->cor1, info->cor2, info->cor3, info->cor4, info->cor5,
-	       info->cor6, info->cor7);
-	printk("  tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco,
-	       info->rbpr, info->rco);
-	printk("  close_delay event count = %d %d %d\n", info->close_delay,
-	       info->event, info->count);
-	printk("  x_char blocked_open = %x %x\n", info->x_char,
-	       info->blocked_open);
-	printk("  open_wait = %lx %lx %lx\n", (long)info->open_wait);
-
-	local_irq_save(flags);
-
-/* Global Registers */
-
-	printk(" CyGFRCR %x\n", base_addr[CyGFRCR]);
-	printk(" CyCAR %x\n", base_addr[CyCAR]);
-	printk(" CyRISR %x\n", base_addr[CyRISR]);
-	printk(" CyTISR %x\n", base_addr[CyTISR]);
-	printk(" CyMISR %x\n", base_addr[CyMISR]);
-	printk(" CyRIR %x\n", base_addr[CyRIR]);
-	printk(" CyTIR %x\n", base_addr[CyTIR]);
-	printk(" CyMIR %x\n", base_addr[CyMIR]);
-	printk(" CyTPR %x\n", base_addr[CyTPR]);
-
-	base_addr[CyCAR] = (u_char) channel;
-
-/* Virtual Registers */
-
-#if 0
-	printk(" CyRIVR %x\n", base_addr[CyRIVR]);
-	printk(" CyTIVR %x\n", base_addr[CyTIVR]);
-	printk(" CyMIVR %x\n", base_addr[CyMIVR]);
-	printk(" CyMISR %x\n", base_addr[CyMISR]);
-#endif
-
-/* Channel Registers */
-
-	printk(" CyCCR %x\n", base_addr[CyCCR]);
-	printk(" CyIER %x\n", base_addr[CyIER]);
-	printk(" CyCOR1 %x\n", base_addr[CyCOR1]);
-	printk(" CyCOR2 %x\n", base_addr[CyCOR2]);
-	printk(" CyCOR3 %x\n", base_addr[CyCOR3]);
-	printk(" CyCOR4 %x\n", base_addr[CyCOR4]);
-	printk(" CyCOR5 %x\n", base_addr[CyCOR5]);
-#if 0
-	printk(" CyCCSR %x\n", base_addr[CyCCSR]);
-	printk(" CyRDCR %x\n", base_addr[CyRDCR]);
-#endif
-	printk(" CySCHR1 %x\n", base_addr[CySCHR1]);
-	printk(" CySCHR2 %x\n", base_addr[CySCHR2]);
-#if 0
-	printk(" CySCHR3 %x\n", base_addr[CySCHR3]);
-	printk(" CySCHR4 %x\n", base_addr[CySCHR4]);
-	printk(" CySCRL %x\n", base_addr[CySCRL]);
-	printk(" CySCRH %x\n", base_addr[CySCRH]);
-	printk(" CyLNC %x\n", base_addr[CyLNC]);
-	printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]);
-	printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]);
-#endif
-	printk(" CyRTPRL %x\n", base_addr[CyRTPRL]);
-	printk(" CyRTPRH %x\n", base_addr[CyRTPRH]);
-	printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]);
-	printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]);
-	printk(" CyRBPR %x\n", base_addr[CyRBPR]);
-	printk(" CyRCOR %x\n", base_addr[CyRCOR]);
-	printk(" CyTBPR %x\n", base_addr[CyTBPR]);
-	printk(" CyTCOR %x\n", base_addr[CyTCOR]);
-
-	local_irq_restore(flags);
-}				/* show_status */
-#endif
-
-#if 0
-/* Dummy routine in mvme16x/config.c for now */
-
-/* Serial console setup. Called from linux/init/main.c */
-
-void console_setup(char *str, int *ints)
-{
-	char *s;
-	int baud, bits, parity;
-	int cflag = 0;
-
-	/* Sanity check. */
-	if (ints[0] > 3 || ints[1] > 3)
-		return;
-
-	/* Get baud, bits and parity */
-	baud = 2400;
-	bits = 8;
-	parity = 'n';
-	if (ints[2])
-		baud = ints[2];
-	if ((s = strchr(str, ','))) {
-		do {
-			s++;
-		} while (*s >= '0' && *s <= '9');
-		if (*s)
-			parity = *s++;
-		if (*s)
-			bits = *s - '0';
-	}
-
-	/* Now construct a cflag setting. */
-	switch (baud) {
-	case 1200:
-		cflag |= B1200;
-		break;
-	case 9600:
-		cflag |= B9600;
-		break;
-	case 19200:
-		cflag |= B19200;
-		break;
-	case 38400:
-		cflag |= B38400;
-		break;
-	case 2400:
-	default:
-		cflag |= B2400;
-		break;
-	}
-	switch (bits) {
-	case 7:
-		cflag |= CS7;
-		break;
-	default:
-	case 8:
-		cflag |= CS8;
-		break;
-	}
-	switch (parity) {
-	case 'o':
-	case 'O':
-		cflag |= PARODD;
-		break;
-	case 'e':
-	case 'E':
-		cflag |= PARENB;
-		break;
-	}
-
-	serial_console_info = &cy_port[ints[1]];
-	serial_console_cflag = cflag;
-	serial_console = ints[1] + 64;	/*callout_driver.minor_start */
-}
-#endif
-
-/*
- * The following is probably out of date for 2.1.x serial console stuff.
- *
- * The console is registered early on from arch/m68k/kernel/setup.c, and
- * it therefore relies on the chip being setup correctly by 166-Bug.  This
- * seems reasonable, as the serial port has been used to invoke the system
- * boot.  It also means that this function must not rely on any data
- * initialisation performed by serial167_init() etc.
- *
- * Of course, once the console has been registered, we had better ensure
- * that serial167_init() doesn't leave the chip non-functional.
- *
- * The console must be locked when we get here.
- */
-
-void serial167_console_write(struct console *co, const char *str,
-			     unsigned count)
-{
-	volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
-	unsigned long flags;
-	volatile u_char sink;
-	u_char ier;
-	int port;
-	u_char do_lf = 0;
-	int i = 0;
-
-	local_irq_save(flags);
-
-	/* Ensure transmitter is enabled! */
-
-	port = 0;
-	base_addr[CyCAR] = (u_char) port;
-	while (base_addr[CyCCR])
-		;
-	base_addr[CyCCR] = CyENB_XMTR;
-
-	ier = base_addr[CyIER];
-	base_addr[CyIER] = CyTxMpty;
-
-	while (1) {
-		if (pcc2chip[PccSCCTICR] & 0x20) {
-			/* We have a Tx int. Acknowledge it */
-			sink = pcc2chip[PccTPIACKR];
-			if ((base_addr[CyLICR] >> 2) == port) {
-				if (i == count) {
-					/* Last char of string is now output */
-					base_addr[CyTEOIR] = CyNOTRANS;
-					break;
-				}
-				if (do_lf) {
-					base_addr[CyTDR] = '\n';
-					str++;
-					i++;
-					do_lf = 0;
-				} else if (*str == '\n') {
-					base_addr[CyTDR] = '\r';
-					do_lf = 1;
-				} else {
-					base_addr[CyTDR] = *str++;
-					i++;
-				}
-				base_addr[CyTEOIR] = 0;
-			} else
-				base_addr[CyTEOIR] = CyNOTRANS;
-		}
-	}
-
-	base_addr[CyIER] = ier;
-
-	local_irq_restore(flags);
-}
-
-static struct tty_driver *serial167_console_device(struct console *c,
-						   int *index)
-{
-	*index = c->index;
-	return cy_serial_driver;
-}
-
-static struct console sercons = {
-	.name = "ttyS",
-	.write = serial167_console_write,
-	.device = serial167_console_device,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-static int __init serial167_console_init(void)
-{
-	if (vme_brdtype == VME_TYPE_MVME166 ||
-	    vme_brdtype == VME_TYPE_MVME167 ||
-	    vme_brdtype == VME_TYPE_MVME177) {
-		mvme167_serial_console_setup(0);
-		register_console(&sercons);
-	}
-	return 0;
-}
-
-console_initcall(serial167_console_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
deleted file mode 100644
index 47e5753..0000000
--- a/drivers/char/specialix.c
+++ /dev/null
@@ -1,2368 +0,0 @@
-/*
- *      specialix.c  -- specialix IO8+ multiport serial driver.
- *
- *      Copyright (C) 1997  Roger Wolff (R.E.Wolff@BitWizard.nl)
- *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *      Specialix pays for the development and support of this driver.
- *      Please DO contact io8-linux@specialix.co.uk if you require
- *      support. But please read the documentation (specialix.txt)
- *      first.
- *
- *      This driver was developped in the BitWizard linux device
- *      driver service. If you require a linux device driver for your
- *      product, please contact devices@BitWizard.nl for a quote.
- *
- *      This code is firmly based on the riscom/8 serial driver,
- *      written by Dmitry Gorodchanin. The specialix IO8+ card
- *      programming information was obtained from the CL-CD1865 Data
- *      Book, and Specialix document number 6200059: IO8+ Hardware
- *      Functional Specification.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License as
- *      published by the Free Software Foundation; either version 2 of
- *      the License, or (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- *      USA.
- *
- * Revision history:
- *
- * Revision 1.0:  April 1st 1997.
- *                Initial release for alpha testing.
- * Revision 1.1:  April 14th 1997.
- *                Incorporated Richard Hudsons suggestions,
- *                removed some debugging printk's.
- * Revision 1.2:  April 15th 1997.
- *                Ported to 2.1.x kernels.
- * Revision 1.3:  April 17th 1997
- *                Backported to 2.0. (Compatibility macros).
- * Revision 1.4:  April 18th 1997
- *                Fixed DTR/RTS bug that caused the card to indicate
- *                "don't send data" to a modem after the password prompt.
- *                Fixed bug for premature (fake) interrupts.
- * Revision 1.5:  April 19th 1997
- *                fixed a minor typo in the header file, cleanup a little.
- *                performance warnings are now MAXed at once per minute.
- * Revision 1.6:  May 23 1997
- *                Changed the specialix=... format to include interrupt.
- * Revision 1.7:  May 27 1997
- *                Made many more debug printk's a compile time option.
- * Revision 1.8:  Jul 1  1997
- *                port to linux-2.1.43 kernel.
- * Revision 1.9:  Oct 9  1998
- *                Added stuff for the IO8+/PCI version.
- * Revision 1.10: Oct 22  1999 / Jan 21 2000.
- *                Added stuff for setserial.
- *                Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr)
- *
- */
-
-#define VERSION "1.11"
-
-
-/*
- * There is a bunch of documentation about the card, jumpers, config
- * settings, restrictions, cables, device names and numbers in
- * Documentation/serial/specialix.txt
- */
-
-#include <linux/module.h>
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/gfp.h>
-
-#include "specialix_io8.h"
-#include "cd1865.h"
-
-
-/*
-   This driver can spew a whole lot of debugging output at you. If you
-   need maximum performance, you should disable the DEBUG define. To
-   aid in debugging in the field, I'm leaving the compile-time debug
-   features enabled, and disable them "runtime". That allows me to
-   instruct people with problems to enable debugging without requiring
-   them to recompile...
-*/
-#define DEBUG
-
-static int sx_debug;
-static int sx_rxfifo = SPECIALIX_RXFIFO;
-static int sx_rtscts;
-
-#ifdef DEBUG
-#define dprintk(f, str...) if (sx_debug & f) printk(str)
-#else
-#define dprintk(f, str...) /* nothing */
-#endif
-
-#define SX_DEBUG_FLOW    0x0001
-#define SX_DEBUG_DATA    0x0002
-#define SX_DEBUG_PROBE   0x0004
-#define SX_DEBUG_CHAN    0x0008
-#define SX_DEBUG_INIT    0x0010
-#define SX_DEBUG_RX      0x0020
-#define SX_DEBUG_TX      0x0040
-#define SX_DEBUG_IRQ     0x0080
-#define SX_DEBUG_OPEN    0x0100
-#define SX_DEBUG_TERMIOS 0x0200
-#define SX_DEBUG_SIGNALS 0x0400
-#define SX_DEBUG_FIFO    0x0800
-
-
-#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
-#define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
-
-
-/* Configurable options: */
-
-/* Am I paranoid or not ? ;-) */
-#define SPECIALIX_PARANOIA_CHECK
-
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#undef SX_REPORT_FIFO
-#undef SX_REPORT_OVERRUN
-
-
-
-
-#define SPECIALIX_LEGAL_FLAGS \
-	(ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
-	 ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
-	 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-
-static struct tty_driver *specialix_driver;
-
-static struct specialix_board sx_board[SX_NBOARD] =  {
-	{ 0, SX_IOBASE1,  9, },
-	{ 0, SX_IOBASE2, 11, },
-	{ 0, SX_IOBASE3, 12, },
-	{ 0, SX_IOBASE4, 15, },
-};
-
-static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
-
-
-static int sx_paranoia_check(struct specialix_port const *port,
-				    char *name, const char *routine)
-{
-#ifdef SPECIALIX_PARANOIA_CHECK
-	static const char *badmagic = KERN_ERR
-	  "sx: Warning: bad specialix port magic number for device %s in %s\n";
-	static const char *badinfo = KERN_ERR
-	  "sx: Warning: null specialix port for device %s in %s\n";
-
-	if (!port) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (port->magic != SPECIALIX_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-
-/*
- *
- *  Service functions for specialix IO8+ driver.
- *
- */
-
-/* Get board number from pointer */
-static inline int board_No(struct specialix_board *bp)
-{
-	return bp - sx_board;
-}
-
-
-/* Get port number from pointer */
-static inline int port_No(struct specialix_port const *port)
-{
-	return SX_PORT(port - sx_port);
-}
-
-
-/* Get pointer to board from pointer to port */
-static inline struct specialix_board *port_Board(
-					struct specialix_port const *port)
-{
-	return &sx_board[SX_BOARD(port - sx_port)];
-}
-
-
-/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in(struct specialix_board *bp,
-							unsigned short reg)
-{
-	bp->reg = reg | 0x80;
-	outb(reg | 0x80, bp->base + SX_ADDR_REG);
-	return inb(bp->base + SX_DATA_REG);
-}
-
-
-/* Output Byte to CL CD186x register */
-static inline void sx_out(struct specialix_board *bp, unsigned short reg,
-			  unsigned char val)
-{
-	bp->reg = reg | 0x80;
-	outb(reg | 0x80, bp->base + SX_ADDR_REG);
-	outb(val, bp->base + SX_DATA_REG);
-}
-
-
-/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in_off(struct specialix_board *bp,
-				unsigned short reg)
-{
-	bp->reg = reg;
-	outb(reg, bp->base + SX_ADDR_REG);
-	return inb(bp->base + SX_DATA_REG);
-}
-
-
-/* Output Byte to CL CD186x register */
-static inline void sx_out_off(struct specialix_board  *bp,
-				unsigned short reg, unsigned char val)
-{
-	bp->reg = reg;
-	outb(reg, bp->base + SX_ADDR_REG);
-	outb(val, bp->base + SX_DATA_REG);
-}
-
-
-/* Wait for Channel Command Register ready */
-static void sx_wait_CCR(struct specialix_board  *bp)
-{
-	unsigned long delay, flags;
-	unsigned char ccr;
-
-	for (delay = SX_CCR_TIMEOUT; delay; delay--) {
-		spin_lock_irqsave(&bp->lock, flags);
-		ccr = sx_in(bp, CD186x_CCR);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		if (!ccr)
-			return;
-		udelay(1);
-	}
-
-	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-
-/* Wait for Channel Command Register ready */
-static void sx_wait_CCR_off(struct specialix_board  *bp)
-{
-	unsigned long delay;
-	unsigned char crr;
-	unsigned long flags;
-
-	for (delay = SX_CCR_TIMEOUT; delay; delay--) {
-		spin_lock_irqsave(&bp->lock, flags);
-		crr = sx_in_off(bp, CD186x_CCR);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		if (!crr)
-			return;
-		udelay(1);
-	}
-
-	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-
-/*
- *  specialix IO8+ IO range functions.
- */
-
-static int sx_request_io_range(struct specialix_board *bp)
-{
-	return request_region(bp->base,
-		bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
-		"specialix IO8+") == NULL;
-}
-
-
-static void sx_release_io_range(struct specialix_board *bp)
-{
-	release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
-					SX_PCI_IO_SPACE : SX_IO_SPACE);
-}
-
-
-/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-static int sx_set_irq(struct specialix_board *bp)
-{
-	int virq;
-	int i;
-	unsigned long flags;
-
-	if (bp->flags & SX_BOARD_IS_PCI)
-		return 1;
-	switch (bp->irq) {
-	/* In the same order as in the docs... */
-	case 15:
-		virq = 0;
-		break;
-	case 12:
-		virq = 1;
-		break;
-	case 11:
-		virq = 2;
-		break;
-	case 9:
-		virq = 3;
-		break;
-	default:printk(KERN_ERR
-			    "Speclialix: cannot set irq to %d.\n", bp->irq);
-		return 0;
-	}
-	spin_lock_irqsave(&bp->lock, flags);
-	for (i = 0; i < 2; i++) {
-		sx_out(bp, CD186x_CAR, i);
-		sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
-	}
-	spin_unlock_irqrestore(&bp->lock, flags);
-	return 1;
-}
-
-
-/* Reset and setup CD186x chip */
-static int sx_init_CD186x(struct specialix_board  *bp)
-{
-	unsigned long flags;
-	int scaler;
-	int rv = 1;
-
-	func_enter();
-	sx_wait_CCR_off(bp);			   /* Wait for CCR ready        */
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out_off(bp, CD186x_CCR, CCR_HARDRESET);      /* Reset CD186x chip          */
-	spin_unlock_irqrestore(&bp->lock, flags);
-	msleep(50);					/* Delay 0.05 sec            */
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out_off(bp, CD186x_GIVR, SX_ID);             /* Set ID for this chip      */
-	sx_out_off(bp, CD186x_GICR, 0);                 /* Clear all bits            */
-	sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT);      /* Prio for modem intr       */
-	sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT);      /* Prio for transmitter intr */
-	sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT);      /* Prio for receiver intr    */
-	/* Set RegAckEn */
-	sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
-
-	/* Setting up prescaler. We need 4 ticks per 1 ms */
-	scaler =  SX_OSCFREQ/SPECIALIX_TPS;
-
-	sx_out_off(bp, CD186x_PPRH, scaler >> 8);
-	sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	if (!sx_set_irq(bp)) {
-		/* Figure out how to pass this along... */
-		printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
-		rv = 0;
-	}
-
-	func_exit();
-	return rv;
-}
-
-
-static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
-{
-	int i;
-	int t;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	for (i = 0, t = 0; i < 8; i++) {
-		sx_out_off(bp, CD186x_CAR, i);
-		if (sx_in_off(bp, reg) & bit)
-			t |= 1 << i;
-	}
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	return t;
-}
-
-
-/* Main probing routine, also sets irq. */
-static int sx_probe(struct specialix_board *bp)
-{
-	unsigned char val1, val2;
-	int rev;
-	int chip;
-
-	func_enter();
-
-	if (sx_request_io_range(bp)) {
-		func_exit();
-		return 1;
-	}
-
-	/* Are the I/O ports here ? */
-	sx_out_off(bp, CD186x_PPRL, 0x5a);
-	udelay(1);
-	val1 = sx_in_off(bp, CD186x_PPRL);
-
-	sx_out_off(bp, CD186x_PPRL, 0xa5);
-	udelay(1);
-	val2 = sx_in_off(bp, CD186x_PPRL);
-
-
-	if (val1 != 0x5a || val2 != 0xa5) {
-		printk(KERN_INFO
-			"sx%d: specialix IO8+ Board at 0x%03x not found.\n",
-						board_No(bp), bp->base);
-		sx_release_io_range(bp);
-		func_exit();
-		return 1;
-	}
-
-	/* Check the DSR lines that Specialix uses as board
-	   identification */
-	val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
-	val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
-	dprintk(SX_DEBUG_INIT,
-			"sx%d: DSR lines are: %02x, rts lines are: %02x\n",
-					board_No(bp), val1, val2);
-
-	/* They managed to switch the bit order between the docs and
-	   the IO8+ card. The new PCI card now conforms to old docs.
-	   They changed the PCI docs to reflect the situation on the
-	   old card. */
-	val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
-	if (val1 != val2) {
-		printk(KERN_INFO
-		  "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
-		       board_No(bp), val2, bp->base, val1);
-		sx_release_io_range(bp);
-		func_exit();
-		return 1;
-	}
-
-
-	/* Reset CD186x again  */
-	if (!sx_init_CD186x(bp)) {
-		sx_release_io_range(bp);
-		func_exit();
-		return 1;
-	}
-
-	sx_request_io_range(bp);
-	bp->flags |= SX_BOARD_PRESENT;
-
-	/* Chip           revcode   pkgtype
-			  GFRCR     SRCR bit 7
-	   CD180 rev B    0x81      0
-	   CD180 rev C    0x82      0
-	   CD1864 rev A   0x82      1
-	   CD1865 rev A   0x83      1  -- Do not use!!! Does not work.
-	   CD1865 rev B   0x84      1
-	 -- Thanks to Gwen Wang, Cirrus Logic.
-	 */
-
-	switch (sx_in_off(bp, CD186x_GFRCR)) {
-	case 0x82:
-		chip = 1864;
-		rev = 'A';
-		break;
-	case 0x83:
-		chip = 1865;
-		rev = 'A';
-		break;
-	case 0x84:
-		chip = 1865;
-		rev = 'B';
-		break;
-	case 0x85:
-		chip = 1865;
-		rev = 'C';
-		break; /* Does not exist at this time */
-	default:
-		chip = -1;
-		rev = 'x';
-	}
-
-	dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
-
-	printk(KERN_INFO
-    "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
-				board_No(bp), bp->base, bp->irq, chip, rev);
-
-	func_exit();
-	return 0;
-}
-
-/*
- *
- *  Interrupt processing routines.
- * */
-
-static struct specialix_port *sx_get_port(struct specialix_board *bp,
-					       unsigned char const *what)
-{
-	unsigned char channel;
-	struct specialix_port *port = NULL;
-
-	channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
-	dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
-	if (channel < CD186x_NCH) {
-		port = &sx_port[board_No(bp) * SX_NPORT + channel];
-		dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
-			board_No(bp) * SX_NPORT + channel,  port,
-			port->port.flags & ASYNC_INITIALIZED);
-
-		if (port->port.flags & ASYNC_INITIALIZED) {
-			dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
-			func_exit();
-			return port;
-		}
-	}
-	printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
-	       board_No(bp), what, channel);
-	return NULL;
-}
-
-
-static void sx_receive_exc(struct specialix_board *bp)
-{
-	struct specialix_port *port;
-	struct tty_struct *tty;
-	unsigned char status;
-	unsigned char ch, flag;
-
-	func_enter();
-
-	port = sx_get_port(bp, "Receive");
-	if (!port) {
-		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
-		func_exit();
-		return;
-	}
-	tty = port->port.tty;
-
-	status = sx_in(bp, CD186x_RCSR);
-
-	dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
-	if (status & RCSR_OE) {
-		port->overrun++;
-		dprintk(SX_DEBUG_FIFO,
-			"sx%d: port %d: Overrun. Total %ld overruns.\n",
-				board_No(bp), port_No(port), port->overrun);
-	}
-	status &= port->mark_mask;
-
-	/* This flip buffer check needs to be below the reading of the
-	   status register to reset the chip's IRQ.... */
-	if (tty_buffer_request_room(tty, 1) == 0) {
-		dprintk(SX_DEBUG_FIFO,
-		    "sx%d: port %d: Working around flip buffer overflow.\n",
-					board_No(bp), port_No(port));
-		func_exit();
-		return;
-	}
-
-	ch = sx_in(bp, CD186x_RDR);
-	if (!status) {
-		func_exit();
-		return;
-	}
-	if (status & RCSR_TOUT) {
-		printk(KERN_INFO
-		    "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
-					board_No(bp), port_No(port));
-		func_exit();
-		return;
-
-	} else if (status & RCSR_BREAK) {
-		dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
-		       board_No(bp), port_No(port));
-		flag = TTY_BREAK;
-		if (port->port.flags & ASYNC_SAK)
-			do_SAK(tty);
-
-	} else if (status & RCSR_PE)
-		flag = TTY_PARITY;
-
-	else if (status & RCSR_FE)
-		flag = TTY_FRAME;
-
-	else if (status & RCSR_OE)
-		flag = TTY_OVERRUN;
-
-	else
-		flag = TTY_NORMAL;
-
-	if (tty_insert_flip_char(tty, ch, flag))
-		tty_flip_buffer_push(tty);
-	func_exit();
-}
-
-
-static void sx_receive(struct specialix_board *bp)
-{
-	struct specialix_port *port;
-	struct tty_struct *tty;
-	unsigned char count;
-
-	func_enter();
-
-	port = sx_get_port(bp, "Receive");
-	if (port == NULL) {
-		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
-		func_exit();
-		return;
-	}
-	tty = port->port.tty;
-
-	count = sx_in(bp, CD186x_RDCR);
-	dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
-	port->hits[count > 8 ? 9 : count]++;
-
-	while (count--)
-		tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
-	tty_flip_buffer_push(tty);
-	func_exit();
-}
-
-
-static void sx_transmit(struct specialix_board *bp)
-{
-	struct specialix_port *port;
-	struct tty_struct *tty;
-	unsigned char count;
-
-	func_enter();
-	port = sx_get_port(bp, "Transmit");
-	if (port == NULL) {
-		func_exit();
-		return;
-	}
-	dprintk(SX_DEBUG_TX, "port: %p\n", port);
-	tty = port->port.tty;
-
-	if (port->IER & IER_TXEMPTY) {
-		/* FIFO drained */
-		sx_out(bp, CD186x_CAR, port_No(port));
-		port->IER &= ~IER_TXEMPTY;
-		sx_out(bp, CD186x_IER, port->IER);
-		func_exit();
-		return;
-	}
-
-	if ((port->xmit_cnt <= 0 && !port->break_length)
-	    || tty->stopped || tty->hw_stopped) {
-		sx_out(bp, CD186x_CAR, port_No(port));
-		port->IER &= ~IER_TXRDY;
-		sx_out(bp, CD186x_IER, port->IER);
-		func_exit();
-		return;
-	}
-
-	if (port->break_length) {
-		if (port->break_length > 0) {
-			if (port->COR2 & COR2_ETC) {
-				sx_out(bp, CD186x_TDR, CD186x_C_ESC);
-				sx_out(bp, CD186x_TDR, CD186x_C_SBRK);
-				port->COR2 &= ~COR2_ETC;
-			}
-			count = min_t(int, port->break_length, 0xff);
-			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
-			sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
-			sx_out(bp, CD186x_TDR, count);
-			port->break_length -= count;
-			if (port->break_length == 0)
-				port->break_length--;
-		} else {
-			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
-			sx_out(bp, CD186x_TDR, CD186x_C_EBRK);
-			sx_out(bp, CD186x_COR2, port->COR2);
-			sx_wait_CCR(bp);
-			sx_out(bp, CD186x_CCR, CCR_CORCHG2);
-			port->break_length = 0;
-		}
-
-		func_exit();
-		return;
-	}
-
-	count = CD186x_NFIFO;
-	do {
-		sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]);
-		port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
-		if (--port->xmit_cnt <= 0)
-			break;
-	} while (--count > 0);
-
-	if (port->xmit_cnt <= 0) {
-		sx_out(bp, CD186x_CAR, port_No(port));
-		port->IER &= ~IER_TXRDY;
-		sx_out(bp, CD186x_IER, port->IER);
-	}
-	if (port->xmit_cnt <= port->wakeup_chars)
-		tty_wakeup(tty);
-
-	func_exit();
-}
-
-
-static void sx_check_modem(struct specialix_board *bp)
-{
-	struct specialix_port *port;
-	struct tty_struct *tty;
-	unsigned char mcr;
-	int msvr_cd;
-
-	dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
-	port = sx_get_port(bp, "Modem");
-	if (port == NULL)
-		return;
-
-	tty = port->port.tty;
-
-	mcr = sx_in(bp, CD186x_MCR);
-
-	if ((mcr & MCR_CDCHG)) {
-		dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
-		msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-		if (msvr_cd) {
-			dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
-			wake_up_interruptible(&port->port.open_wait);
-		} else {
-			dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
-			tty_hangup(tty);
-		}
-	}
-
-#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
-	if (mcr & MCR_CTSCHG) {
-		if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) {
-			tty->hw_stopped = 0;
-			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
-		} else {
-			tty->hw_stopped = 1;
-			port->IER &= ~IER_TXRDY;
-		}
-		sx_out(bp, CD186x_IER, port->IER);
-	}
-	if (mcr & MCR_DSSXHG) {
-		if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) {
-			tty->hw_stopped = 0;
-			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
-		} else {
-			tty->hw_stopped = 1;
-			port->IER &= ~IER_TXRDY;
-		}
-		sx_out(bp, CD186x_IER, port->IER);
-	}
-#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */
-
-	/* Clear change bits */
-	sx_out(bp, CD186x_MCR, 0);
-}
-
-
-/* The main interrupt processing routine */
-static irqreturn_t sx_interrupt(int dummy, void *dev_id)
-{
-	unsigned char status;
-	unsigned char ack;
-	struct specialix_board *bp = dev_id;
-	unsigned long loop = 0;
-	int saved_reg;
-	unsigned long flags;
-
-	func_enter();
-
-	spin_lock_irqsave(&bp->lock, flags);
-
-	dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
-		port_No(sx_get_port(bp, "INT")),
-		SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
-	if (!(bp->flags & SX_BOARD_ACTIVE)) {
-		dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
-								bp->irq);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		func_exit();
-		return IRQ_NONE;
-	}
-
-	saved_reg = bp->reg;
-
-	while (++loop < 16) {
-		status = sx_in(bp, CD186x_SRSR) &
-				(SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
-		if (status == 0)
-			break;
-		if (status & SRSR_RREQint) {
-			ack = sx_in(bp, CD186x_RRAR);
-
-			if (ack == (SX_ID | GIVR_IT_RCV))
-				sx_receive(bp);
-			else if (ack == (SX_ID | GIVR_IT_REXC))
-				sx_receive_exc(bp);
-			else
-				printk(KERN_ERR
-				"sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
-						board_No(bp), status, ack);
-
-		} else if (status & SRSR_TREQint) {
-			ack = sx_in(bp, CD186x_TRAR);
-
-			if (ack == (SX_ID | GIVR_IT_TX))
-				sx_transmit(bp);
-			else
-				printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
-					board_No(bp), status, ack,
-					port_No(sx_get_port(bp, "Int")));
-		} else if (status & SRSR_MREQint) {
-			ack = sx_in(bp, CD186x_MRAR);
-
-			if (ack == (SX_ID | GIVR_IT_MODEM))
-				sx_check_modem(bp);
-			else
-				printk(KERN_ERR
-				  "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
-				       board_No(bp), status, ack);
-
-		}
-
-		sx_out(bp, CD186x_EOIR, 0);   /* Mark end of interrupt */
-	}
-	bp->reg = saved_reg;
-	outb(bp->reg, bp->base + SX_ADDR_REG);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	func_exit();
-	return IRQ_HANDLED;
-}
-
-
-/*
- *  Routines for open & close processing.
- */
-
-static void turn_ints_off(struct specialix_board *bp)
-{
-	unsigned long flags;
-
-	func_enter();
-	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in_off(bp, 0); /* Turn off interrupts. */
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	func_exit();
-}
-
-static void turn_ints_on(struct specialix_board *bp)
-{
-	unsigned long flags;
-
-	func_enter();
-
-	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in(bp, 0); /* Turn ON interrupts. */
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	func_exit();
-}
-
-
-/* Called with disabled interrupts */
-static int sx_setup_board(struct specialix_board *bp)
-{
-	int error;
-
-	if (bp->flags & SX_BOARD_ACTIVE)
-		return 0;
-
-	if (bp->flags & SX_BOARD_IS_PCI)
-		error = request_irq(bp->irq, sx_interrupt,
-			IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
-	else
-		error = request_irq(bp->irq, sx_interrupt,
-			IRQF_DISABLED, "specialix IO8+", bp);
-
-	if (error)
-		return error;
-
-	turn_ints_on(bp);
-	bp->flags |= SX_BOARD_ACTIVE;
-
-	return 0;
-}
-
-
-/* Called with disabled interrupts */
-static void sx_shutdown_board(struct specialix_board *bp)
-{
-	func_enter();
-
-	if (!(bp->flags & SX_BOARD_ACTIVE)) {
-		func_exit();
-		return;
-	}
-
-	bp->flags &= ~SX_BOARD_ACTIVE;
-
-	dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
-		 bp->irq, board_No(bp));
-	free_irq(bp->irq, bp);
-	turn_ints_off(bp);
-	func_exit();
-}
-
-static unsigned int sx_crtscts(struct tty_struct *tty)
-{
-	if (sx_rtscts)
-		return C_CRTSCTS(tty);
-	return 1;
-}
-
-/*
- * Setting up port characteristics.
- * Must be called with disabled interrupts
- */
-static void sx_change_speed(struct specialix_board *bp,
-						struct specialix_port *port)
-{
-	struct tty_struct *tty;
-	unsigned long baud;
-	long tmp;
-	unsigned char cor1 = 0, cor3 = 0;
-	unsigned char mcor1 = 0, mcor2 = 0;
-	static unsigned long again;
-	unsigned long flags;
-
-	func_enter();
-
-	tty = port->port.tty;
-	if (!tty || !tty->termios) {
-		func_exit();
-		return;
-	}
-
-	port->IER  = 0;
-	port->COR2 = 0;
-	/* Select port on the board */
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CAR, port_No(port));
-
-	/* The Specialix board doens't implement the RTS lines.
-	   They are used to set the IRQ level. Don't touch them. */
-	if (sx_crtscts(tty))
-		port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
-	else
-		port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
-	baud = tty_get_baud_rate(tty);
-
-	if (baud == 38400) {
-		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			baud = 57600;
-		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			baud = 115200;
-	}
-
-	if (!baud) {
-		/* Drop DTR & exit */
-		dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
-		if (!sx_crtscts(tty)) {
-			port->MSVR &= ~MSVR_DTR;
-			spin_lock_irqsave(&bp->lock, flags);
-			sx_out(bp, CD186x_MSVR, port->MSVR);
-			spin_unlock_irqrestore(&bp->lock, flags);
-		} else
-			dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
-		return;
-	} else {
-		/* Set DTR on */
-		if (!sx_crtscts(tty))
-			port->MSVR |= MSVR_DTR;
-	}
-
-	/*
-	 * Now we must calculate some speed depended things
-	 */
-
-	/* Set baud rate for port */
-	tmp = port->custom_divisor ;
-	if (tmp)
-		printk(KERN_INFO
-			"sx%d: Using custom baud rate divisor %ld. \n"
-			"This is an untested option, please be careful.\n",
-							port_No(port), tmp);
-	else
-		tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
-								CD186x_TPC);
-
-	if (tmp < 0x10 && time_before(again, jiffies)) {
-		again = jiffies + HZ * 60;
-		/* Page 48 of version 2.0 of the CL-CD1865 databook */
-		if (tmp >= 12) {
-			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-				"Performance degradation is possible.\n"
-				"Read specialix.txt for more info.\n",
-						port_No(port), tmp);
-		} else {
-			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-		"Warning: overstressing Cirrus chip. This might not work.\n"
-		"Read specialix.txt for more info.\n", port_No(port), tmp);
-		}
-	}
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
-	sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
-	sx_out(bp, CD186x_RBPRL, tmp & 0xff);
-	sx_out(bp, CD186x_TBPRL, tmp & 0xff);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	if (port->custom_divisor)
-		baud = (SX_OSCFREQ + port->custom_divisor/2) /
-							port->custom_divisor;
-	baud = (baud + 5) / 10;		/* Estimated CPS */
-
-	/* Two timer ticks seems enough to wakeup something like SLIP driver */
-	tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
-	port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
-					      SERIAL_XMIT_SIZE - 1 : tmp);
-
-	/* Receiver timeout will be transmission time for 1.5 chars */
-	tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
-	tmp = (tmp > 0xff) ? 0xff : tmp;
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_RTPR, tmp);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	switch (C_CSIZE(tty)) {
-	case CS5:
-		cor1 |= COR1_5BITS;
-		break;
-	case CS6:
-		cor1 |= COR1_6BITS;
-		break;
-	case CS7:
-		cor1 |= COR1_7BITS;
-		break;
-	case CS8:
-		cor1 |= COR1_8BITS;
-		break;
-	}
-
-	if (C_CSTOPB(tty))
-		cor1 |= COR1_2SB;
-
-	cor1 |= COR1_IGNORE;
-	if (C_PARENB(tty)) {
-		cor1 |= COR1_NORMPAR;
-		if (C_PARODD(tty))
-			cor1 |= COR1_ODDP;
-		if (I_INPCK(tty))
-			cor1 &= ~COR1_IGNORE;
-	}
-	/* Set marking of some errors */
-	port->mark_mask = RCSR_OE | RCSR_TOUT;
-	if (I_INPCK(tty))
-		port->mark_mask |= RCSR_FE | RCSR_PE;
-	if (I_BRKINT(tty) || I_PARMRK(tty))
-		port->mark_mask |= RCSR_BREAK;
-	if (I_IGNPAR(tty))
-		port->mark_mask &= ~(RCSR_FE | RCSR_PE);
-	if (I_IGNBRK(tty)) {
-		port->mark_mask &= ~RCSR_BREAK;
-		if (I_IGNPAR(tty))
-			/* Real raw mode. Ignore all */
-			port->mark_mask &= ~RCSR_OE;
-	}
-	/* Enable Hardware Flow Control */
-	if (C_CRTSCTS(tty)) {
-#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
-		port->IER |= IER_DSR | IER_CTS;
-		mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
-		mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
-		spin_lock_irqsave(&bp->lock, flags);
-		tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
-							(MSVR_CTS|MSVR_DSR));
-		spin_unlock_irqrestore(&bp->lock, flags);
-#else
-		port->COR2 |= COR2_CTSAE;
-#endif
-	}
-	/* Enable Software Flow Control. FIXME: I'm not sure about this */
-	/* Some people reported that it works, but I still doubt it */
-	if (I_IXON(tty)) {
-		port->COR2 |= COR2_TXIBE;
-		cor3 |= (COR3_FCT | COR3_SCDE);
-		if (I_IXANY(tty))
-			port->COR2 |= COR2_IXM;
-		spin_lock_irqsave(&bp->lock, flags);
-		sx_out(bp, CD186x_SCHR1, START_CHAR(tty));
-		sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty));
-		sx_out(bp, CD186x_SCHR3, START_CHAR(tty));
-		sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty));
-		spin_unlock_irqrestore(&bp->lock, flags);
-	}
-	if (!C_CLOCAL(tty)) {
-		/* Enable CD check */
-		port->IER |= IER_CD;
-		mcor1 |= MCOR1_CDZD;
-		mcor2 |= MCOR2_CDOD;
-	}
-
-	if (C_CREAD(tty))
-		/* Enable receiver */
-		port->IER |= IER_RXD;
-
-	/* Set input FIFO size (1-8 bytes) */
-	cor3 |= sx_rxfifo;
-	/* Setting up CD186x channel registers */
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_COR1, cor1);
-	sx_out(bp, CD186x_COR2, port->COR2);
-	sx_out(bp, CD186x_COR3, cor3);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	/* Make CD186x know about registers change */
-	sx_wait_CCR(bp);
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
-	/* Setting up modem option registers */
-	dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
-								mcor1, mcor2);
-	sx_out(bp, CD186x_MCOR1, mcor1);
-	sx_out(bp, CD186x_MCOR2, mcor2);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	/* Enable CD186x transmitter & receiver */
-	sx_wait_CCR(bp);
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN);
-	/* Enable interrupts */
-	sx_out(bp, CD186x_IER, port->IER);
-	/* And finally set the modem lines... */
-	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	func_exit();
-}
-
-
-/* Must be called with interrupts enabled */
-static int sx_setup_port(struct specialix_board *bp,
-						struct specialix_port *port)
-{
-	unsigned long flags;
-
-	func_enter();
-
-	if (port->port.flags & ASYNC_INITIALIZED) {
-		func_exit();
-		return 0;
-	}
-
-	if (!port->xmit_buf) {
-		/* We may sleep in get_zeroed_page() */
-		unsigned long tmp;
-
-		tmp = get_zeroed_page(GFP_KERNEL);
-		if (tmp == 0L) {
-			func_exit();
-			return -ENOMEM;
-		}
-
-		if (port->xmit_buf) {
-			free_page(tmp);
-			func_exit();
-			return -ERESTARTSYS;
-		}
-		port->xmit_buf = (unsigned char *) tmp;
-	}
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	if (port->port.tty)
-		clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
-
-	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	sx_change_speed(bp, port);
-	port->port.flags |= ASYNC_INITIALIZED;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-
-
-	func_exit();
-	return 0;
-}
-
-
-/* Must be called with interrupts disabled */
-static void sx_shutdown_port(struct specialix_board *bp,
-						struct specialix_port *port)
-{
-	struct tty_struct *tty;
-	int i;
-	unsigned long flags;
-
-	func_enter();
-
-	if (!(port->port.flags & ASYNC_INITIALIZED)) {
-		func_exit();
-		return;
-	}
-
-	if (sx_debug & SX_DEBUG_FIFO) {
-		dprintk(SX_DEBUG_FIFO,
-			"sx%d: port %d: %ld overruns, FIFO hits [ ",
-				board_No(bp), port_No(port), port->overrun);
-		for (i = 0; i < 10; i++)
-			dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
-		dprintk(SX_DEBUG_FIFO, "].\n");
-	}
-
-	if (port->xmit_buf) {
-		free_page((unsigned long) port->xmit_buf);
-		port->xmit_buf = NULL;
-	}
-
-	/* Select port */
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CAR, port_No(port));
-
-	tty = port->port.tty;
-	if (tty == NULL || C_HUPCL(tty)) {
-		/* Drop DTR */
-		sx_out(bp, CD186x_MSVDTR, 0);
-	}
-	spin_unlock_irqrestore(&bp->lock, flags);
-	/* Reset port */
-	sx_wait_CCR(bp);
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CCR, CCR_SOFTRESET);
-	/* Disable all interrupts from this port */
-	port->IER = 0;
-	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	if (tty)
-		set_bit(TTY_IO_ERROR, &tty->flags);
-	port->port.flags &= ~ASYNC_INITIALIZED;
-
-	if (!bp->count)
-		sx_shutdown_board(bp);
-	func_exit();
-}
-
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-						struct specialix_port *port)
-{
-	DECLARE_WAITQUEUE(wait,  current);
-	struct specialix_board *bp = port_Board(port);
-	int    retval;
-	int    do_clocal = 0;
-	int    CD;
-	unsigned long flags;
-
-	func_enter();
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&port->port.close_wait);
-		if (port->port.flags & ASYNC_HUP_NOTIFY) {
-			func_exit();
-			return -EAGAIN;
-		} else {
-			func_exit();
-			return -ERESTARTSYS;
-		}
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		port->port.flags |= ASYNC_NORMAL_ACTIVE;
-		func_exit();
-		return 0;
-	}
-
-	if (C_CLOCAL(tty))
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&port->port.open_wait, &wait);
-	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp))
-		port->port.count--;
-	spin_unlock_irqrestore(&port->lock, flags);
-	port->port.blocked_open++;
-	while (1) {
-		spin_lock_irqsave(&bp->lock, flags);
-		sx_out(bp, CD186x_CAR, port_No(port));
-		CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-		if (sx_crtscts(tty)) {
-			/* Activate RTS */
-			port->MSVR |= MSVR_DTR;		/* WTF? */
-			sx_out(bp, CD186x_MSVR, port->MSVR);
-		} else {
-			/* Activate DTR */
-			port->MSVR |= MSVR_DTR;
-			sx_out(bp, CD186x_MSVR, port->MSVR);
-		}
-		spin_unlock_irqrestore(&bp->lock, flags);
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(port->port.flags & ASYNC_INITIALIZED)) {
-			if (port->port.flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;
-			break;
-		}
-		if (!(port->port.flags & ASYNC_CLOSING) &&
-		    (do_clocal || CD))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->port.open_wait, &wait);
-	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp))
-		port->port.count++;
-	port->port.blocked_open--;
-	spin_unlock_irqrestore(&port->lock, flags);
-	if (retval) {
-		func_exit();
-		return retval;
-	}
-
-	port->port.flags |= ASYNC_NORMAL_ACTIVE;
-	func_exit();
-	return 0;
-}
-
-
-static int sx_open(struct tty_struct *tty, struct file *filp)
-{
-	int board;
-	int error;
-	struct specialix_port *port;
-	struct specialix_board *bp;
-	int i;
-	unsigned long flags;
-
-	func_enter();
-
-	board = SX_BOARD(tty->index);
-
-	if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) {
-		func_exit();
-		return -ENODEV;
-	}
-
-	bp = &sx_board[board];
-	port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
-	port->overrun = 0;
-	for (i = 0; i < 10; i++)
-		port->hits[i] = 0;
-
-	dprintk(SX_DEBUG_OPEN,
-			"Board = %d, bp = %p, port = %p, portno = %d.\n",
-				 board, bp, port, SX_PORT(tty->index));
-
-	if (sx_paranoia_check(port, tty->name, "sx_open")) {
-		func_enter();
-		return -ENODEV;
-	}
-
-	error = sx_setup_board(bp);
-	if (error) {
-		func_exit();
-		return error;
-	}
-
-	spin_lock_irqsave(&bp->lock, flags);
-	port->port.count++;
-	bp->count++;
-	tty->driver_data = port;
-	port->port.tty = tty;
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	error = sx_setup_port(bp, port);
-	if (error) {
-		func_enter();
-		return error;
-	}
-
-	error = block_til_ready(tty, filp, port);
-	if (error) {
-		func_enter();
-		return error;
-	}
-
-	func_exit();
-	return 0;
-}
-
-static void sx_flush_buffer(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	unsigned long flags;
-	struct specialix_board  *bp;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-	spin_lock_irqsave(&port->lock, flags);
-	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-	tty_wakeup(tty);
-
-	func_exit();
-}
-
-static void sx_close(struct tty_struct *tty, struct file *filp)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-	unsigned long timeout;
-
-	func_enter();
-	if (!port || sx_paranoia_check(port, tty->name, "close")) {
-		func_exit();
-		return;
-	}
-	spin_lock_irqsave(&port->lock, flags);
-
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-	if (tty->count == 1 && port->port.count != 1) {
-		printk(KERN_ERR "sx%d: sx_close: bad port count;"
-		       " tty->count is 1, port count is %d\n",
-		       board_No(bp), port->port.count);
-		port->port.count = 1;
-	}
-
-	if (port->port.count > 1) {
-		port->port.count--;
-		bp->count--;
-
-		spin_unlock_irqrestore(&port->lock, flags);
-
-		func_exit();
-		return;
-	}
-	port->port.flags |= ASYNC_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	spin_unlock_irqrestore(&port->lock, flags);
-	dprintk(SX_DEBUG_OPEN, "Closing\n");
-	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, port->port.closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	dprintk(SX_DEBUG_OPEN, "Closed\n");
-	port->IER &= ~IER_RXD;
-	if (port->port.flags & ASYNC_INITIALIZED) {
-		port->IER &= ~IER_TXRDY;
-		port->IER |= IER_TXEMPTY;
-		spin_lock_irqsave(&bp->lock, flags);
-		sx_out(bp, CD186x_CAR, port_No(port));
-		sx_out(bp, CD186x_IER, port->IER);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		/*
-		 * Before we drop DTR, make sure the UART transmitter
-		 * has completely drained; this is especially
-		 * important if there is a transmit FIFO!
-		 */
-		timeout = jiffies+HZ;
-		while (port->IER & IER_TXEMPTY) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			msleep_interruptible(jiffies_to_msecs(port->timeout));
-			if (time_after(jiffies, timeout)) {
-				printk(KERN_INFO "Timeout waiting for close\n");
-				break;
-			}
-		}
-
-	}
-
-	if (--bp->count < 0) {
-		printk(KERN_ERR
-		    "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
-				board_No(bp), bp->count, tty->index);
-		bp->count = 0;
-	}
-	if (--port->port.count < 0) {
-		printk(KERN_ERR
-			"sx%d: sx_close: bad port count for tty%d: %d\n",
-				board_No(bp), port_No(port), port->port.count);
-		port->port.count = 0;
-	}
-
-	sx_shutdown_port(bp, port);
-	sx_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	spin_lock_irqsave(&port->lock, flags);
-	tty->closing = 0;
-	port->port.tty = NULL;
-	spin_unlock_irqrestore(&port->lock, flags);
-	if (port->port.blocked_open) {
-		if (port->port.close_delay)
-			msleep_interruptible(
-				jiffies_to_msecs(port->port.close_delay));
-		wake_up_interruptible(&port->port.open_wait);
-	}
-	port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&port->port.close_wait);
-
-	func_exit();
-}
-
-
-static int sx_write(struct tty_struct *tty,
-					const unsigned char *buf, int count)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	int c, total = 0;
-	unsigned long flags;
-
-	func_enter();
-	if (sx_paranoia_check(port, tty->name, "sx_write")) {
-		func_exit();
-		return 0;
-	}
-
-	bp = port_Board(port);
-
-	if (!port->xmit_buf) {
-		func_exit();
-		return 0;
-	}
-
-	while (1) {
-		spin_lock_irqsave(&port->lock, flags);
-		c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
-				   SERIAL_XMIT_SIZE - port->xmit_head));
-		if (c <= 0) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			break;
-		}
-		memcpy(port->xmit_buf + port->xmit_head, buf, c);
-		port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
-		port->xmit_cnt += c;
-		spin_unlock_irqrestore(&port->lock, flags);
-
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	spin_lock_irqsave(&bp->lock, flags);
-	if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
-	    !(port->IER & IER_TXRDY)) {
-		port->IER |= IER_TXRDY;
-		sx_out(bp, CD186x_CAR, port_No(port));
-		sx_out(bp, CD186x_IER, port->IER);
-	}
-	spin_unlock_irqrestore(&bp->lock, flags);
-	func_exit();
-
-	return total;
-}
-
-
-static int sx_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct specialix_port *port = tty->driver_data;
-	unsigned long flags;
-	struct specialix_board  *bp;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
-		func_exit();
-		return 0;
-	}
-	dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
-	if (!port->xmit_buf) {
-		func_exit();
-		return 0;
-	}
-	bp = port_Board(port);
-	spin_lock_irqsave(&port->lock, flags);
-
-	dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
-					port->xmit_cnt, port->xmit_buf);
-	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		dprintk(SX_DEBUG_TX, "Exit size\n");
-		func_exit();
-		return 0;
-	}
-	dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
-	port->xmit_buf[port->xmit_head++] = ch;
-	port->xmit_head &= SERIAL_XMIT_SIZE - 1;
-	port->xmit_cnt++;
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	func_exit();
-	return 1;
-}
-
-
-static void sx_flush_chars(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	unsigned long flags;
-	struct specialix_board  *bp = port_Board(port);
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) {
-		func_exit();
-		return;
-	}
-	if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-	    !port->xmit_buf) {
-		func_exit();
-		return;
-	}
-	spin_lock_irqsave(&bp->lock, flags);
-	port->IER |= IER_TXRDY;
-	sx_out(port_Board(port), CD186x_CAR, port_No(port));
-	sx_out(port_Board(port), CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	func_exit();
-}
-
-
-static int sx_write_room(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	int	ret;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_write_room")) {
-		func_exit();
-		return 0;
-	}
-
-	ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-
-	func_exit();
-	return ret;
-}
-
-
-static int sx_chars_in_buffer(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
-		func_exit();
-		return 0;
-	}
-	func_exit();
-	return port->xmit_cnt;
-}
-
-static int sx_tiocmget(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned char status;
-	unsigned int result;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, __func__)) {
-		func_exit();
-		return -ENODEV;
-	}
-
-	bp = port_Board(port);
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	status = sx_in(bp, CD186x_MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
-			port_No(port), status, sx_in(bp, CD186x_CAR));
-	dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
-	if (sx_crtscts(port->port.tty)) {
-		result  = TIOCM_DTR | TIOCM_DSR
-			  |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
-			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
-	} else {
-		result  = TIOCM_RTS | TIOCM_DSR
-			  |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
-			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
-	}
-
-	func_exit();
-
-	return result;
-}
-
-
-static int sx_tiocmset(struct tty_struct *tty,
-		       unsigned int set, unsigned int clear)
-{
-	struct specialix_port *port = tty->driver_data;
-	unsigned long flags;
-	struct specialix_board *bp;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, __func__)) {
-		func_exit();
-		return -ENODEV;
-	}
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (sx_crtscts(port->port.tty)) {
-		if (set & TIOCM_RTS)
-			port->MSVR |= MSVR_DTR;
-	} else {
-		if (set & TIOCM_DTR)
-			port->MSVR |= MSVR_DTR;
-	}
-	if (sx_crtscts(port->port.tty)) {
-		if (clear & TIOCM_RTS)
-			port->MSVR &= ~MSVR_DTR;
-	} else {
-		if (clear & TIOCM_DTR)
-			port->MSVR &= ~MSVR_DTR;
-	}
-	spin_lock(&bp->lock);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock(&bp->lock);
-	spin_unlock_irqrestore(&port->lock, flags);
-	func_exit();
-	return 0;
-}
-
-
-static int sx_send_break(struct tty_struct *tty, int length)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp = port_Board(port);
-	unsigned long flags;
-
-	func_enter();
-	if (length == 0 || length == -1)
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->break_length = SPECIALIX_TPS / HZ * length;
-	port->COR2 |= COR2_ETC;
-	port->IER  |= IER_TXRDY;
-	spin_lock(&bp->lock);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	sx_out(bp, CD186x_COR2, port->COR2);
-	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock(&bp->lock);
-	spin_unlock_irqrestore(&port->lock, flags);
-	sx_wait_CCR(bp);
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CCR, CCR_CORCHG2);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	sx_wait_CCR(bp);
-
-	func_exit();
-	return 0;
-}
-
-
-static int sx_set_serial_info(struct specialix_port *port,
-					struct serial_struct __user *newinfo)
-{
-	struct serial_struct tmp;
-	struct specialix_board *bp = port_Board(port);
-	int change_speed;
-
-	func_enter();
-
-	if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
-		func_enter();
-		return -EFAULT;
-	}
-
-	mutex_lock(&port->port.mutex);
-	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
-			(tmp.flags & ASYNC_SPD_MASK));
-	change_speed |= (tmp.custom_divisor != port->custom_divisor);
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((tmp.close_delay != port->port.close_delay) ||
-		    (tmp.closing_wait != port->port.closing_wait) ||
-		    ((tmp.flags & ~ASYNC_USR_MASK) !=
-		     (port->port.flags & ~ASYNC_USR_MASK))) {
-			func_exit();
-			mutex_unlock(&port->port.mutex);
-			return -EPERM;
-		}
-		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
-						(tmp.flags & ASYNC_USR_MASK));
-		port->custom_divisor = tmp.custom_divisor;
-	} else {
-		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
-						(tmp.flags & ASYNC_FLAGS));
-		port->port.close_delay = tmp.close_delay;
-		port->port.closing_wait = tmp.closing_wait;
-		port->custom_divisor = tmp.custom_divisor;
-	}
-	if (change_speed)
-		sx_change_speed(bp, port);
-
-	func_exit();
-	mutex_unlock(&port->port.mutex);
-	return 0;
-}
-
-
-static int sx_get_serial_info(struct specialix_port *port,
-				     struct serial_struct __user *retinfo)
-{
-	struct serial_struct tmp;
-	struct specialix_board *bp = port_Board(port);
-
-	func_enter();
-
-	memset(&tmp, 0, sizeof(tmp));
-	mutex_lock(&port->port.mutex);
-	tmp.type = PORT_CIRRUS;
-	tmp.line = port - sx_port;
-	tmp.port = bp->base;
-	tmp.irq  = bp->irq;
-	tmp.flags = port->port.flags;
-	tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC;
-	tmp.close_delay = port->port.close_delay * HZ/100;
-	tmp.closing_wait = port->port.closing_wait * HZ/100;
-	tmp.custom_divisor =  port->custom_divisor;
-	tmp.xmit_fifo_size = CD186x_NFIFO;
-	mutex_unlock(&port->port.mutex);
-	if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
-		func_exit();
-		return -EFAULT;
-	}
-
-	func_exit();
-	return 0;
-}
-
-
-static int sx_ioctl(struct tty_struct *tty,
-				unsigned int cmd, unsigned long arg)
-{
-	struct specialix_port *port = tty->driver_data;
-	void __user *argp = (void __user *)arg;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_ioctl")) {
-		func_exit();
-		return -ENODEV;
-	}
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		func_exit();
-		return sx_get_serial_info(port, argp);
-	case TIOCSSERIAL:
-		func_exit();
-		return sx_set_serial_info(port, argp);
-	default:
-		func_exit();
-		return -ENOIOCTLCMD;
-	}
-	func_exit();
-	return 0;
-}
-
-
-static void sx_throttle(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_throttle")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-
-	/* Use DTR instead of RTS ! */
-	if (sx_crtscts(tty))
-		port->MSVR &= ~MSVR_DTR;
-	else {
-		/* Auch!!! I think the system shouldn't call this then. */
-		/* Or maybe we're supposed (allowed?) to do our side of hw
-		   handshake anyway, even when hardware handshake is off.
-		   When you see this in your logs, please report.... */
-		printk(KERN_ERR
-		   "sx%d: Need to throttle, but can't (hardware hs is off)\n",
-							port_No(port));
-	}
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	spin_unlock_irqrestore(&bp->lock, flags);
-	if (I_IXOFF(tty)) {
-		sx_wait_CCR(bp);
-		spin_lock_irqsave(&bp->lock, flags);
-		sx_out(bp, CD186x_CCR, CCR_SSCH2);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		sx_wait_CCR(bp);
-	}
-	spin_lock_irqsave(&bp->lock, flags);
-	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	func_exit();
-}
-
-
-static void sx_unthrottle(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	/* XXXX Use DTR INSTEAD???? */
-	if (sx_crtscts(tty))
-		port->MSVR |= MSVR_DTR;
-	/* Else clause: see remark in "sx_throttle"... */
-	spin_lock(&bp->lock);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	spin_unlock(&bp->lock);
-	if (I_IXOFF(tty)) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		sx_wait_CCR(bp);
-		spin_lock_irqsave(&bp->lock, flags);
-		sx_out(bp, CD186x_CCR, CCR_SSCH1);
-		spin_unlock_irqrestore(&bp->lock, flags);
-		sx_wait_CCR(bp);
-		spin_lock_irqsave(&port->lock, flags);
-	}
-	spin_lock(&bp->lock);
-	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock(&bp->lock);
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	func_exit();
-}
-
-
-static void sx_stop(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_stop")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->IER &= ~IER_TXRDY;
-	spin_lock(&bp->lock);
-	sx_out(bp, CD186x_CAR, port_No(port));
-	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock(&bp->lock);
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	func_exit();
-}
-
-
-static void sx_start(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_start")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
-		port->IER |= IER_TXRDY;
-		spin_lock(&bp->lock);
-		sx_out(bp, CD186x_CAR, port_No(port));
-		sx_out(bp, CD186x_IER, port->IER);
-		spin_unlock(&bp->lock);
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	func_exit();
-}
-
-static void sx_hangup(struct tty_struct *tty)
-{
-	struct specialix_port *port = tty->driver_data;
-	struct specialix_board *bp;
-	unsigned long flags;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_hangup")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-
-	sx_shutdown_port(bp, port);
-	spin_lock_irqsave(&port->lock, flags);
-	bp->count -= port->port.count;
-	if (bp->count < 0) {
-		printk(KERN_ERR
-			"sx%d: sx_hangup: bad board count: %d port: %d\n",
-					board_No(bp), bp->count, tty->index);
-		bp->count = 0;
-	}
-	port->port.count = 0;
-	port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	port->port.tty = NULL;
-	spin_unlock_irqrestore(&port->lock, flags);
-	wake_up_interruptible(&port->port.open_wait);
-
-	func_exit();
-}
-
-
-static void sx_set_termios(struct tty_struct *tty,
-					struct ktermios *old_termios)
-{
-	struct specialix_port *port = tty->driver_data;
-	unsigned long flags;
-	struct specialix_board  *bp;
-
-	if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
-		return;
-
-	bp = port_Board(port);
-	spin_lock_irqsave(&port->lock, flags);
-	sx_change_speed(port_Board(port), port);
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		sx_start(tty);
-	}
-}
-
-static const struct tty_operations sx_ops = {
-	.open  = sx_open,
-	.close = sx_close,
-	.write = sx_write,
-	.put_char = sx_put_char,
-	.flush_chars = sx_flush_chars,
-	.write_room = sx_write_room,
-	.chars_in_buffer = sx_chars_in_buffer,
-	.flush_buffer = sx_flush_buffer,
-	.ioctl = sx_ioctl,
-	.throttle = sx_throttle,
-	.unthrottle = sx_unthrottle,
-	.set_termios = sx_set_termios,
-	.stop = sx_stop,
-	.start = sx_start,
-	.hangup = sx_hangup,
-	.tiocmget = sx_tiocmget,
-	.tiocmset = sx_tiocmset,
-	.break_ctl = sx_send_break,
-};
-
-static int sx_init_drivers(void)
-{
-	int error;
-	int i;
-
-	func_enter();
-
-	specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT);
-	if (!specialix_driver) {
-		printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n");
-		func_exit();
-		return 1;
-	}
-
-	specialix_driver->owner = THIS_MODULE;
-	specialix_driver->name = "ttyW";
-	specialix_driver->major = SPECIALIX_NORMAL_MAJOR;
-	specialix_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	specialix_driver->subtype = SERIAL_TYPE_NORMAL;
-	specialix_driver->init_termios = tty_std_termios;
-	specialix_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	specialix_driver->init_termios.c_ispeed = 9600;
-	specialix_driver->init_termios.c_ospeed = 9600;
-	specialix_driver->flags = TTY_DRIVER_REAL_RAW |
-						TTY_DRIVER_HARDWARE_BREAK;
-	tty_set_operations(specialix_driver, &sx_ops);
-
-	error = tty_register_driver(specialix_driver);
-	if (error) {
-		put_tty_driver(specialix_driver);
-		printk(KERN_ERR
-		  "sx: Couldn't register specialix IO8+ driver, error = %d\n",
-								error);
-		func_exit();
-		return 1;
-	}
-	memset(sx_port, 0, sizeof(sx_port));
-	for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
-		sx_port[i].magic = SPECIALIX_MAGIC;
-		tty_port_init(&sx_port[i].port);
-		spin_lock_init(&sx_port[i].lock);
-	}
-
-	func_exit();
-	return 0;
-}
-
-static void sx_release_drivers(void)
-{
-	func_enter();
-
-	tty_unregister_driver(specialix_driver);
-	put_tty_driver(specialix_driver);
-	func_exit();
-}
-
-/*
- * This routine must be called by kernel at boot time
- */
-static int __init specialix_init(void)
-{
-	int i;
-	int found = 0;
-
-	func_enter();
-
-	printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
-	printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
-	if (sx_rtscts)
-		printk(KERN_INFO
-			"sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
-	else
-		printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-
-	for (i = 0; i < SX_NBOARD; i++)
-		spin_lock_init(&sx_board[i].lock);
-
-	if (sx_init_drivers()) {
-		func_exit();
-		return -EIO;
-	}
-
-	for (i = 0; i < SX_NBOARD; i++)
-		if (sx_board[i].base && !sx_probe(&sx_board[i]))
-			found++;
-
-#ifdef CONFIG_PCI
-	{
-		struct pci_dev *pdev = NULL;
-
-		i = 0;
-		while (i < SX_NBOARD) {
-			if (sx_board[i].flags & SX_BOARD_PRESENT) {
-				i++;
-				continue;
-			}
-			pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
-					PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
-			if (!pdev)
-				break;
-
-			if (pci_enable_device(pdev))
-				continue;
-
-			sx_board[i].irq = pdev->irq;
-
-			sx_board[i].base = pci_resource_start(pdev, 2);
-
-			sx_board[i].flags |= SX_BOARD_IS_PCI;
-			if (!sx_probe(&sx_board[i]))
-				found++;
-		}
-		/* May exit pci_get sequence early with lots of boards */
-		if (pdev != NULL)
-			pci_dev_put(pdev);
-	}
-#endif
-
-	if (!found) {
-		sx_release_drivers();
-		printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n");
-		func_exit();
-		return -EIO;
-	}
-
-	func_exit();
-	return 0;
-}
-
-static int iobase[SX_NBOARD]  = {0,};
-static int irq[SX_NBOARD] = {0,};
-
-module_param_array(iobase, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param(sx_debug, int, 0);
-module_param(sx_rtscts, int, 0);
-module_param(sx_rxfifo, int, 0);
-
-/*
- * You can setup up to 4 boards.
- * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter.
- * You should specify the IRQs too in that case "irq=....,...".
- *
- * More than 4 boards in one computer is not possible, as the card can
- * only use 4 different interrupts.
- *
- */
-static int __init specialix_init_module(void)
-{
-	int i;
-
-	func_enter();
-
-	if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
-		for (i = 0; i < SX_NBOARD; i++) {
-			sx_board[i].base = iobase[i];
-			sx_board[i].irq = irq[i];
-			sx_board[i].count = 0;
-		}
-	}
-
-	func_exit();
-
-	return specialix_init();
-}
-
-static void __exit specialix_exit_module(void)
-{
-	int i;
-
-	func_enter();
-
-	sx_release_drivers();
-	for (i = 0; i < SX_NBOARD; i++)
-		if (sx_board[i].flags & SX_BOARD_PRESENT)
-			sx_release_io_range(&sx_board[i]);
-	func_exit();
-}
-
-static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
-
-module_init(specialix_init_module);
-module_exit(specialix_exit_module);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR);
diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h
deleted file mode 100644
index c630052..0000000
--- a/drivers/char/specialix_io8.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *      linux/drivers/char/specialix_io8.h  -- 
- *                                   Specialix IO8+ multiport serial driver.
- *
- *      Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
- *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *
- *      Specialix pays for the development and support of this driver.
- *      Please DO contact io8-linux@specialix.co.uk if you require
- *      support.
- *
- *      This driver was developped in the BitWizard linux device
- *      driver service. If you require a linux device driver for your
- *      product, please contact devices@BitWizard.nl for a quote.
- *
- *      This code is firmly based on the riscom/8 serial driver,
- *      written by Dmitry Gorodchanin. The specialix IO8+ card
- *      programming information was obtained from the CL-CD1865 Data
- *      Book, and Specialix document number 6200059: IO8+ Hardware
- *      Functional Specification.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License as
- *      published by the Free Software Foundation; either version 2 of
- *      the License, or (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- *      USA.
- * */
-
-#ifndef __LINUX_SPECIALIX_H
-#define __LINUX_SPECIALIX_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/* You can have max 4 ISA cards in one PC, and I recommend not much 
-more than a few  PCI versions of the card. */
-
-#define SX_NBOARD		8
-
-/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */
-#define SX_IO_SPACE             4
-/* The PCI version decodes 8 addresses, but still only 2 are used. */
-#define SX_PCI_IO_SPACE         8
-
-/* eight ports per board. */
-#define SX_NPORT        	8
-#define SX_BOARD(line)		((line) / SX_NPORT)
-#define SX_PORT(line)		((line) & (SX_NPORT - 1))
-
-
-#define SX_DATA_REG 0     /* Base+0 : Data register */
-#define SX_ADDR_REG 1     /* base+1 : Address register. */
-
-#define MHz *1000000	/* I'm ashamed of myself. */
-
-/* On-board oscillator frequency */
-#define SX_OSCFREQ      (25 MHz/2)
-/* There is a 25MHz crystal on the board, but the chip is in /2 mode */
-
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define SPECIALIX_TPS		4000
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define SPECIALIX_RXFIFO	6	/* Max. receiver FIFO size (1-8) */
-
-#define SPECIALIX_MAGIC		0x0907
-
-#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait upto
-                                  10 milliseconds before the internal
-                                  processor is available again after
-                                  you give it a command */
-
-#define SX_IOBASE1	0x100
-#define SX_IOBASE2	0x180
-#define SX_IOBASE3	0x250
-#define SX_IOBASE4	0x260
-
-struct specialix_board {
-	unsigned long   flags;
-	unsigned short	base;
-	unsigned char 	irq;
-	//signed   char	count;
-	int count;
-	unsigned char	DTR;
-        int reg;
-	spinlock_t lock;
-};
-
-#define SX_BOARD_PRESENT	0x00000001
-#define SX_BOARD_ACTIVE		0x00000002
-#define SX_BOARD_IS_PCI		0x00000004
-
-
-struct specialix_port {
-	int			magic;
-	struct tty_port		port;
-	int			baud_base;
-	int			flags;
-	int			timeout;
-	unsigned char 		* xmit_buf;
-	int			custom_divisor;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	short			wakeup_chars;
-	short			break_length;
-	unsigned char		mark_mask;
-	unsigned char		IER;
-	unsigned char		MSVR;
-	unsigned char		COR2;
-	unsigned long		overrun;
-	unsigned long		hits[10];
-	spinlock_t lock;
-};
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_SPECIALIX_H */
-
-
-
-
-
-
-
-
-
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
deleted file mode 100644
index 4fff5cd..0000000
--- a/drivers/char/stallion.c
+++ /dev/null
@@ -1,4651 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	stallion.c  -- stallion multiport serial driver.
- *
- *	Copyright (C) 1996-1999  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This code is loosely based on the Linux serial driver, written by
- *	Linus Torvalds, Theodore T'so and others.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/seq_file.h>
-#include <linux/cd1400.h>
-#include <linux/sc26198.h>
-#include <linux/comstats.h>
-#include <linux/stallion.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/ctype.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/pci.h>
-
-/*****************************************************************************/
-
-/*
- *	Define different board types. Use the standard Stallion "assigned"
- *	board numbers. Boards supported in this driver are abbreviated as
- *	EIO = EasyIO and ECH = EasyConnection 8/32.
- */
-#define	BRD_EASYIO	20
-#define	BRD_ECH		21
-#define	BRD_ECHMC	22
-#define	BRD_ECHPCI	26
-#define	BRD_ECH64PCI	27
-#define	BRD_EASYIOPCI	28
-
-struct stlconf {
-	unsigned int	brdtype;
-	int		ioaddr1;
-	int		ioaddr2;
-	unsigned long	memaddr;
-	int		irq;
-	int		irqtype;
-};
-
-static unsigned int stl_nrbrds;
-
-/*****************************************************************************/
-
-/*
- *	Define some important driver characteristics. Device major numbers
- *	allocated as per Linux Device Registry.
- */
-#ifndef	STL_SIOMEMMAJOR
-#define	STL_SIOMEMMAJOR		28
-#endif
-#ifndef	STL_SERIALMAJOR
-#define	STL_SERIALMAJOR		24
-#endif
-#ifndef	STL_CALLOUTMAJOR
-#define	STL_CALLOUTMAJOR	25
-#endif
-
-/*
- *	Set the TX buffer size. Bigger is better, but we don't want
- *	to chew too much memory with buffers!
- */
-#define	STL_TXBUFLOW		512
-#define	STL_TXBUFSIZE		4096
-
-/*****************************************************************************/
-
-/*
- *	Define our local driver identity first. Set up stuff to deal with
- *	all the local structures required by a serial tty driver.
- */
-static char	*stl_drvtitle = "Stallion Multiport Serial Driver";
-static char	*stl_drvname = "stallion";
-static char	*stl_drvversion = "5.6.0";
-
-static struct tty_driver	*stl_serial;
-
-/*
- *	Define a local default termios struct. All ports will be created
- *	with this termios initially. Basically all it defines is a raw port
- *	at 9600, 8 data bits, 1 stop bit.
- */
-static struct ktermios		stl_deftermios = {
-	.c_cflag	= (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
-	.c_cc		= INIT_C_CC,
-	.c_ispeed	= 9600,
-	.c_ospeed	= 9600,
-};
-
-/*
- *	Define global place to put buffer overflow characters.
- */
-static char		stl_unwanted[SC26198_RXFIFOSIZE];
-
-/*****************************************************************************/
-
-static DEFINE_MUTEX(stl_brdslock);
-static struct stlbrd		*stl_brds[STL_MAXBRDS];
-
-static const struct tty_port_operations stl_port_ops;
-
-/*
- *	Per board state flags. Used with the state field of the board struct.
- *	Not really much here!
- */
-#define	BRD_FOUND	0x1
-#define STL_PROBED	0x2
-
-
-/*
- *	Define the port structure istate flags. These set of flags are
- *	modified at interrupt time - so setting and reseting them needs
- *	to be atomic. Use the bit clear/setting routines for this.
- */
-#define	ASYI_TXBUSY	1
-#define	ASYI_TXLOW	2
-#define	ASYI_TXFLOWED	3
-
-/*
- *	Define an array of board names as printable strings. Handy for
- *	referencing boards when printing trace and stuff.
- */
-static char	*stl_brdnames[] = {
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	"EasyIO",
-	"EC8/32-AT",
-	"EC8/32-MC",
-	NULL,
-	NULL,
-	NULL,
-	"EC8/32-PCI",
-	"EC8/64-PCI",
-	"EasyIO-PCI",
-};
-
-/*****************************************************************************/
-
-/*
- *	Define some string labels for arguments passed from the module
- *	load line. These allow for easy board definitions, and easy
- *	modification of the io, memory and irq resoucres.
- */
-static unsigned int stl_nargs;
-static char	*board0[4];
-static char	*board1[4];
-static char	*board2[4];
-static char	*board3[4];
-
-static char	**stl_brdsp[] = {
-	(char **) &board0,
-	(char **) &board1,
-	(char **) &board2,
-	(char **) &board3
-};
-
-/*
- *	Define a set of common board names, and types. This is used to
- *	parse any module arguments.
- */
-
-static struct {
-	char	*name;
-	int	type;
-} stl_brdstr[] = {
-	{ "easyio", BRD_EASYIO },
-	{ "eio", BRD_EASYIO },
-	{ "20", BRD_EASYIO },
-	{ "ec8/32", BRD_ECH },
-	{ "ec8/32-at", BRD_ECH },
-	{ "ec8/32-isa", BRD_ECH },
-	{ "ech", BRD_ECH },
-	{ "echat", BRD_ECH },
-	{ "21", BRD_ECH },
-	{ "ec8/32-mc", BRD_ECHMC },
-	{ "ec8/32-mca", BRD_ECHMC },
-	{ "echmc", BRD_ECHMC },
-	{ "echmca", BRD_ECHMC },
-	{ "22", BRD_ECHMC },
-	{ "ec8/32-pc", BRD_ECHPCI },
-	{ "ec8/32-pci", BRD_ECHPCI },
-	{ "26", BRD_ECHPCI },
-	{ "ec8/64-pc", BRD_ECH64PCI },
-	{ "ec8/64-pci", BRD_ECH64PCI },
-	{ "ech-pci", BRD_ECH64PCI },
-	{ "echpci", BRD_ECH64PCI },
-	{ "echpc", BRD_ECH64PCI },
-	{ "27", BRD_ECH64PCI },
-	{ "easyio-pc", BRD_EASYIOPCI },
-	{ "easyio-pci", BRD_EASYIOPCI },
-	{ "eio-pci", BRD_EASYIOPCI },
-	{ "eiopci", BRD_EASYIOPCI },
-	{ "28", BRD_EASYIOPCI },
-};
-
-/*
- *	Define the module agruments.
- */
-
-module_param_array(board0, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board1, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board2, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board3, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
-
-/*****************************************************************************/
-
-/*
- *	Hardware ID bits for the EasyIO and ECH boards. These defines apply
- *	to the directly accessible io ports of these boards (not the uarts -
- *	they are in cd1400.h and sc26198.h).
- */
-#define	EIO_8PORTRS	0x04
-#define	EIO_4PORTRS	0x05
-#define	EIO_8PORTDI	0x00
-#define	EIO_8PORTM	0x06
-#define	EIO_MK3		0x03
-#define	EIO_IDBITMASK	0x07
-
-#define	EIO_BRDMASK	0xf0
-#define	ID_BRD4		0x10
-#define	ID_BRD8		0x20
-#define	ID_BRD16	0x30
-
-#define	EIO_INTRPEND	0x08
-#define	EIO_INTEDGE	0x00
-#define	EIO_INTLEVEL	0x08
-#define	EIO_0WS		0x10
-
-#define	ECH_ID		0xa0
-#define	ECH_IDBITMASK	0xe0
-#define	ECH_BRDENABLE	0x08
-#define	ECH_BRDDISABLE	0x00
-#define	ECH_INTENABLE	0x01
-#define	ECH_INTDISABLE	0x00
-#define	ECH_INTLEVEL	0x02
-#define	ECH_INTEDGE	0x00
-#define	ECH_INTRPEND	0x01
-#define	ECH_BRDRESET	0x01
-
-#define	ECHMC_INTENABLE	0x01
-#define	ECHMC_BRDRESET	0x02
-
-#define	ECH_PNLSTATUS	2
-#define	ECH_PNL16PORT	0x20
-#define	ECH_PNLIDMASK	0x07
-#define	ECH_PNLXPID	0x40
-#define	ECH_PNLINTRPEND	0x80
-
-#define	ECH_ADDR2MASK	0x1e0
-
-/*
- *	Define the vector mapping bits for the programmable interrupt board
- *	hardware. These bits encode the interrupt for the board to use - it
- *	is software selectable (except the EIO-8M).
- */
-static unsigned char	stl_vecmap[] = {
-	0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
-	0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
-};
-
-/*
- *	Lock ordering is that you may not take stallion_lock holding
- *	brd_lock.
- */
-
-static spinlock_t brd_lock; 		/* Guard the board mapping */
-static spinlock_t stallion_lock;	/* Guard the tty driver */
-
-/*
- *	Set up enable and disable macros for the ECH boards. They require
- *	the secondary io address space to be activated and deactivated.
- *	This way all ECH boards can share their secondary io region.
- *	If this is an ECH-PCI board then also need to set the page pointer
- *	to point to the correct page.
- */
-#define	BRDENABLE(brdnr,pagenr)						\
-	if (stl_brds[(brdnr)]->brdtype == BRD_ECH)			\
-		outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE),	\
-			stl_brds[(brdnr)]->ioctrl);			\
-	else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI)		\
-		outb((pagenr), stl_brds[(brdnr)]->ioctrl);
-
-#define	BRDDISABLE(brdnr)						\
-	if (stl_brds[(brdnr)]->brdtype == BRD_ECH)			\
-		outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE),	\
-			stl_brds[(brdnr)]->ioctrl);
-
-#define	STL_CD1400MAXBAUD	230400
-#define	STL_SC26198MAXBAUD	460800
-
-#define	STL_BAUDBASE		115200
-#define	STL_CLOSEDELAY		(5 * HZ / 10)
-
-/*****************************************************************************/
-
-/*
- *	Define the Stallion PCI vendor and device IDs.
- */
-#ifndef	PCI_VENDOR_ID_STALLION
-#define	PCI_VENDOR_ID_STALLION		0x124d
-#endif
-#ifndef PCI_DEVICE_ID_ECHPCI832
-#define	PCI_DEVICE_ID_ECHPCI832		0x0000
-#endif
-#ifndef PCI_DEVICE_ID_ECHPCI864
-#define	PCI_DEVICE_ID_ECHPCI864		0x0002
-#endif
-#ifndef PCI_DEVICE_ID_EIOPCI
-#define	PCI_DEVICE_ID_EIOPCI		0x0003
-#endif
-
-/*
- *	Define structure to hold all Stallion PCI boards.
- */
-
-static struct pci_device_id stl_pcibrds[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864),
-		.driver_data = BRD_ECH64PCI },
-	{ PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI),
-		.driver_data = BRD_EASYIOPCI },
-	{ PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832),
-		.driver_data = BRD_ECHPCI },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410),
-		.driver_data = BRD_ECHPCI },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, stl_pcibrds);
-
-/*****************************************************************************/
-
-/*
- *	Define macros to extract a brd/port number from a minor number.
- */
-#define	MINOR2BRD(min)		(((min) & 0xc0) >> 6)
-#define	MINOR2PORT(min)		((min) & 0x3f)
-
-/*
- *	Define a baud rate table that converts termios baud rate selector
- *	into the actual baud rate value. All baud rate calculations are
- *	based on the actual baud rate required.
- */
-static unsigned int	stl_baudrates[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
-};
-
-/*****************************************************************************/
-
-/*
- *	Declare all those functions in this driver!
- */
-
-static long	stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg);
-static int	stl_brdinit(struct stlbrd *brdp);
-static int	stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp);
-static int	stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
-
-/*
- *	CD1400 uart specific handling functions.
- */
-static void	stl_cd1400setreg(struct stlport *portp, int regnr, int value);
-static int	stl_cd1400getreg(struct stlport *portp, int regnr);
-static int	stl_cd1400updatereg(struct stlport *portp, int regnr, int value);
-static int	stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
-static void	stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void	stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp);
-static int	stl_cd1400getsignals(struct stlport *portp);
-static void	stl_cd1400setsignals(struct stlport *portp, int dtr, int rts);
-static void	stl_cd1400ccrwait(struct stlport *portp);
-static void	stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx);
-static void	stl_cd1400startrxtx(struct stlport *portp, int rx, int tx);
-static void	stl_cd1400disableintrs(struct stlport *portp);
-static void	stl_cd1400sendbreak(struct stlport *portp, int len);
-static void	stl_cd1400flowctrl(struct stlport *portp, int state);
-static void	stl_cd1400sendflow(struct stlport *portp, int state);
-static void	stl_cd1400flush(struct stlport *portp);
-static int	stl_cd1400datastate(struct stlport *portp);
-static void	stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase);
-static void	stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase);
-static void	stl_cd1400txisr(struct stlpanel *panelp, int ioaddr);
-static void	stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr);
-static void	stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr);
-
-static inline int	stl_cd1400breakisr(struct stlport *portp, int ioaddr);
-
-/*
- *	SC26198 uart specific handling functions.
- */
-static void	stl_sc26198setreg(struct stlport *portp, int regnr, int value);
-static int	stl_sc26198getreg(struct stlport *portp, int regnr);
-static int	stl_sc26198updatereg(struct stlport *portp, int regnr, int value);
-static int	stl_sc26198getglobreg(struct stlport *portp, int regnr);
-static int	stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
-static void	stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void	stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp);
-static int	stl_sc26198getsignals(struct stlport *portp);
-static void	stl_sc26198setsignals(struct stlport *portp, int dtr, int rts);
-static void	stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx);
-static void	stl_sc26198startrxtx(struct stlport *portp, int rx, int tx);
-static void	stl_sc26198disableintrs(struct stlport *portp);
-static void	stl_sc26198sendbreak(struct stlport *portp, int len);
-static void	stl_sc26198flowctrl(struct stlport *portp, int state);
-static void	stl_sc26198sendflow(struct stlport *portp, int state);
-static void	stl_sc26198flush(struct stlport *portp);
-static int	stl_sc26198datastate(struct stlport *portp);
-static void	stl_sc26198wait(struct stlport *portp);
-static void	stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty);
-static void	stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase);
-static void	stl_sc26198txisr(struct stlport *port);
-static void	stl_sc26198rxisr(struct stlport *port, unsigned int iack);
-static void	stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch);
-static void	stl_sc26198rxbadchars(struct stlport *portp);
-static void	stl_sc26198otherisr(struct stlport *port, unsigned int iack);
-
-/*****************************************************************************/
-
-/*
- *	Generic UART support structure.
- */
-typedef struct uart {
-	int	(*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp);
-	void	(*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-	void	(*setport)(struct stlport *portp, struct ktermios *tiosp);
-	int	(*getsignals)(struct stlport *portp);
-	void	(*setsignals)(struct stlport *portp, int dtr, int rts);
-	void	(*enablerxtx)(struct stlport *portp, int rx, int tx);
-	void	(*startrxtx)(struct stlport *portp, int rx, int tx);
-	void	(*disableintrs)(struct stlport *portp);
-	void	(*sendbreak)(struct stlport *portp, int len);
-	void	(*flowctrl)(struct stlport *portp, int state);
-	void	(*sendflow)(struct stlport *portp, int state);
-	void	(*flush)(struct stlport *portp);
-	int	(*datastate)(struct stlport *portp);
-	void	(*intr)(struct stlpanel *panelp, unsigned int iobase);
-} uart_t;
-
-/*
- *	Define some macros to make calling these functions nice and clean.
- */
-#define	stl_panelinit		(* ((uart_t *) panelp->uartp)->panelinit)
-#define	stl_portinit		(* ((uart_t *) portp->uartp)->portinit)
-#define	stl_setport		(* ((uart_t *) portp->uartp)->setport)
-#define	stl_getsignals		(* ((uart_t *) portp->uartp)->getsignals)
-#define	stl_setsignals		(* ((uart_t *) portp->uartp)->setsignals)
-#define	stl_enablerxtx		(* ((uart_t *) portp->uartp)->enablerxtx)
-#define	stl_startrxtx		(* ((uart_t *) portp->uartp)->startrxtx)
-#define	stl_disableintrs	(* ((uart_t *) portp->uartp)->disableintrs)
-#define	stl_sendbreak		(* ((uart_t *) portp->uartp)->sendbreak)
-#define	stl_flowctrl		(* ((uart_t *) portp->uartp)->flowctrl)
-#define	stl_sendflow		(* ((uart_t *) portp->uartp)->sendflow)
-#define	stl_flush		(* ((uart_t *) portp->uartp)->flush)
-#define	stl_datastate		(* ((uart_t *) portp->uartp)->datastate)
-
-/*****************************************************************************/
-
-/*
- *	CD1400 UART specific data initialization.
- */
-static uart_t stl_cd1400uart = {
-	stl_cd1400panelinit,
-	stl_cd1400portinit,
-	stl_cd1400setport,
-	stl_cd1400getsignals,
-	stl_cd1400setsignals,
-	stl_cd1400enablerxtx,
-	stl_cd1400startrxtx,
-	stl_cd1400disableintrs,
-	stl_cd1400sendbreak,
-	stl_cd1400flowctrl,
-	stl_cd1400sendflow,
-	stl_cd1400flush,
-	stl_cd1400datastate,
-	stl_cd1400eiointr
-};
-
-/*
- *	Define the offsets within the register bank of a cd1400 based panel.
- *	These io address offsets are common to the EasyIO board as well.
- */
-#define	EREG_ADDR	0
-#define	EREG_DATA	4
-#define	EREG_RXACK	5
-#define	EREG_TXACK	6
-#define	EREG_MDACK	7
-
-#define	EREG_BANKSIZE	8
-
-#define	CD1400_CLK	25000000
-#define	CD1400_CLK8M	20000000
-
-/*
- *	Define the cd1400 baud rate clocks. These are used when calculating
- *	what clock and divisor to use for the required baud rate. Also
- *	define the maximum baud rate allowed, and the default base baud.
- */
-static int	stl_cd1400clkdivs[] = {
-	CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4
-};
-
-/*****************************************************************************/
-
-/*
- *	SC26198 UART specific data initization.
- */
-static uart_t stl_sc26198uart = {
-	stl_sc26198panelinit,
-	stl_sc26198portinit,
-	stl_sc26198setport,
-	stl_sc26198getsignals,
-	stl_sc26198setsignals,
-	stl_sc26198enablerxtx,
-	stl_sc26198startrxtx,
-	stl_sc26198disableintrs,
-	stl_sc26198sendbreak,
-	stl_sc26198flowctrl,
-	stl_sc26198sendflow,
-	stl_sc26198flush,
-	stl_sc26198datastate,
-	stl_sc26198intr
-};
-
-/*
- *	Define the offsets within the register bank of a sc26198 based panel.
- */
-#define	XP_DATA		0
-#define	XP_ADDR		1
-#define	XP_MODID	2
-#define	XP_STATUS	2
-#define	XP_IACK		3
-
-#define	XP_BANKSIZE	4
-
-/*
- *	Define the sc26198 baud rate table. Offsets within the table
- *	represent the actual baud rate selector of sc26198 registers.
- */
-static unsigned int	sc26198_baudtable[] = {
-	50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
-	4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
-	230400, 460800, 921600
-};
-
-#define	SC26198_NRBAUDS		ARRAY_SIZE(sc26198_baudtable)
-
-/*****************************************************************************/
-
-/*
- *	Define the driver info for a user level control device. Used mainly
- *	to get at port stats - only not using the port device itself.
- */
-static const struct file_operations	stl_fsiomem = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= stl_memioctl,
-	.llseek		= noop_llseek,
-};
-
-static struct class *stallion_class;
-
-static void stl_cd_change(struct stlport *portp)
-{
-	unsigned int oldsigs = portp->sigs;
-	struct tty_struct *tty = tty_port_tty_get(&portp->port);
-
-	if (!tty)
-		return;
-
-	portp->sigs = stl_getsignals(portp);
-
-	if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
-		wake_up_interruptible(&portp->port.open_wait);
-
-	if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
-		if (portp->port.flags & ASYNC_CHECK_CD)
-			tty_hangup(tty);
-	tty_kref_put(tty);
-}
-
-/*
- *	Check for any arguments passed in on the module load command line.
- */
-
-/*****************************************************************************/
-
-/*
- *	Parse the supplied argument string, into the board conf struct.
- */
-
-static int __init stl_parsebrd(struct stlconf *confp, char **argp)
-{
-	char	*sp;
-	unsigned int i;
-
-	pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp);
-
-	if ((argp[0] == NULL) || (*argp[0] == 0))
-		return 0;
-
-	for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++)
-		*sp = tolower(*sp);
-
-	for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++)
-		if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
-			break;
-
-	if (i == ARRAY_SIZE(stl_brdstr)) {
-		printk("STALLION: unknown board name, %s?\n", argp[0]);
-		return 0;
-	}
-
-	confp->brdtype = stl_brdstr[i].type;
-
-	i = 1;
-	if ((argp[i] != NULL) && (*argp[i] != 0))
-		confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0);
-	i++;
-	if (confp->brdtype == BRD_ECH) {
-		if ((argp[i] != NULL) && (*argp[i] != 0))
-			confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0);
-		i++;
-	}
-	if ((argp[i] != NULL) && (*argp[i] != 0))
-		confp->irq = simple_strtoul(argp[i], NULL, 0);
-	return 1;
-}
-
-/*****************************************************************************/
-
-/*
- *	Allocate a new board structure. Fill out the basic info in it.
- */
-
-static struct stlbrd *stl_allocbrd(void)
-{
-	struct stlbrd	*brdp;
-
-	brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL);
-	if (!brdp) {
-		printk("STALLION: failed to allocate memory (size=%Zd)\n",
-			sizeof(struct stlbrd));
-		return NULL;
-	}
-
-	brdp->magic = STL_BOARDMAGIC;
-	return brdp;
-}
-
-/*****************************************************************************/
-
-static int stl_activate(struct tty_port *port, struct tty_struct *tty)
-{
-	struct stlport *portp = container_of(port, struct stlport, port);
-	if (!portp->tx.buf) {
-		portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
-		if (!portp->tx.buf)
-			return -ENOMEM;
-		portp->tx.head = portp->tx.buf;
-		portp->tx.tail = portp->tx.buf;
-	}
-	stl_setport(portp, tty->termios);
-	portp->sigs = stl_getsignals(portp);
-	stl_setsignals(portp, 1, 1);
-	stl_enablerxtx(portp, 1, 1);
-	stl_startrxtx(portp, 1, 0);
-	return 0;
-}
-
-static int stl_open(struct tty_struct *tty, struct file *filp)
-{
-	struct stlport	*portp;
-	struct stlbrd	*brdp;
-	unsigned int	minordev, brdnr, panelnr;
-	int		portnr;
-
-	pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name);
-
-	minordev = tty->index;
-	brdnr = MINOR2BRD(minordev);
-	if (brdnr >= stl_nrbrds)
-		return -ENODEV;
-	brdp = stl_brds[brdnr];
-	if (brdp == NULL)
-		return -ENODEV;
-
-	minordev = MINOR2PORT(minordev);
-	for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) {
-		if (brdp->panels[panelnr] == NULL)
-			break;
-		if (minordev < brdp->panels[panelnr]->nrports) {
-			portnr = minordev;
-			break;
-		}
-		minordev -= brdp->panels[panelnr]->nrports;
-	}
-	if (portnr < 0)
-		return -ENODEV;
-
-	portp = brdp->panels[panelnr]->ports[portnr];
-	if (portp == NULL)
-		return -ENODEV;
-
-	tty->driver_data = portp;
-	return tty_port_open(&portp->port, tty, filp);
-
-}
-
-/*****************************************************************************/
-
-static int stl_carrier_raised(struct tty_port *port)
-{
-	struct stlport *portp = container_of(port, struct stlport, port);
-	return (portp->sigs & TIOCM_CD) ? 1 : 0;
-}
-
-static void stl_dtr_rts(struct tty_port *port, int on)
-{
-	struct stlport *portp = container_of(port, struct stlport, port);
-	/* Takes brd_lock internally */
-	stl_setsignals(portp, on, on);
-}
-
-/*****************************************************************************/
-
-static void stl_flushbuffer(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_flushbuffer(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-
-	stl_flush(portp);
-	tty_wakeup(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_waituntilsent(struct tty_struct *tty, int timeout)
-{
-	struct stlport	*portp;
-	unsigned long	tend;
-
-	pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-
-	if (timeout == 0)
-		timeout = HZ;
-	tend = jiffies + timeout;
-
-	while (stl_datastate(portp)) {
-		if (signal_pending(current))
-			break;
-		msleep_interruptible(20);
-		if (time_after_eq(jiffies, tend))
-			break;
-	}
-}
-
-/*****************************************************************************/
-
-static void stl_shutdown(struct tty_port *port)
-{
-	struct stlport *portp = container_of(port, struct stlport, port);
-	stl_disableintrs(portp);
-	stl_enablerxtx(portp, 0, 0);
-	stl_flush(portp);
-	portp->istate = 0;
-	if (portp->tx.buf != NULL) {
-		kfree(portp->tx.buf);
-		portp->tx.buf = NULL;
-		portp->tx.head = NULL;
-		portp->tx.tail = NULL;
-	}
-}
-
-static void stl_close(struct tty_struct *tty, struct file *filp)
-{
-	struct stlport*portp;
-	pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
-
-	portp = tty->driver_data;
-	if(portp == NULL)
-		return;
-	tty_port_close(&portp->port, tty, filp);
-}
-
-/*****************************************************************************/
-
-/*
- *	Write routine. Take data and stuff it in to the TX ring queue.
- *	If transmit interrupts are not running then start them.
- */
-
-static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	struct stlport	*portp;
-	unsigned int	len, stlen;
-	unsigned char	*chbuf;
-	char		*head, *tail;
-
-	pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->tx.buf == NULL)
-		return 0;
-
-/*
- *	If copying direct from user space we must cater for page faults,
- *	causing us to "sleep" here for a while. To handle this copy in all
- *	the data we need now, into a local buffer. Then when we got it all
- *	copy it into the TX buffer.
- */
-	chbuf = (unsigned char *) buf;
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	if (head >= tail) {
-		len = STL_TXBUFSIZE - (head - tail) - 1;
-		stlen = STL_TXBUFSIZE - (head - portp->tx.buf);
-	} else {
-		len = tail - head - 1;
-		stlen = len;
-	}
-
-	len = min(len, (unsigned int)count);
-	count = 0;
-	while (len > 0) {
-		stlen = min(len, stlen);
-		memcpy(head, chbuf, stlen);
-		len -= stlen;
-		chbuf += stlen;
-		count += stlen;
-		head += stlen;
-		if (head >= (portp->tx.buf + STL_TXBUFSIZE)) {
-			head = portp->tx.buf;
-			stlen = tail - head;
-		}
-	}
-	portp->tx.head = head;
-
-	clear_bit(ASYI_TXLOW, &portp->istate);
-	stl_startrxtx(portp, -1, 1);
-
-	return count;
-}
-
-/*****************************************************************************/
-
-static int stl_putchar(struct tty_struct *tty, unsigned char ch)
-{
-	struct stlport	*portp;
-	unsigned int	len;
-	char		*head, *tail;
-
-	pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -EINVAL;
-	if (portp->tx.buf == NULL)
-		return -EINVAL;
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-
-	len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head);
-	len--;
-
-	if (len > 0) {
-		*head++ = ch;
-		if (head >= (portp->tx.buf + STL_TXBUFSIZE))
-			head = portp->tx.buf;
-	}	
-	portp->tx.head = head;
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	If there are any characters in the buffer then make sure that TX
- *	interrupts are on and get'em out. Normally used after the putchar
- *	routine has been called.
- */
-
-static void stl_flushchars(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_flushchars(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	if (portp->tx.buf == NULL)
-		return;
-
-	stl_startrxtx(portp, -1, 1);
-}
-
-/*****************************************************************************/
-
-static int stl_writeroom(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-	char		*head, *tail;
-
-	pr_debug("stl_writeroom(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->tx.buf == NULL)
-		return 0;
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1);
-}
-
-/*****************************************************************************/
-
-/*
- *	Return number of chars in the TX buffer. Normally we would just
- *	calculate the number of chars in the buffer and return that, but if
- *	the buffer is empty and TX interrupts are still on then we return
- *	that the buffer still has 1 char in it. This way whoever called us
- *	will not think that ALL chars have drained - since the UART still
- *	must have some chars in it (we are busy after all).
- */
-
-static int stl_charsinbuffer(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-	unsigned int	size;
-	char		*head, *tail;
-
-	pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return 0;
-	if (portp->tx.buf == NULL)
-		return 0;
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
-	if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
-		size = 1;
-	return size;
-}
-
-/*****************************************************************************/
-
-/*
- *	Generate the serial struct info.
- */
-
-static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
-{
-	struct serial_struct	sio;
-	struct stlbrd		*brdp;
-
-	pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
-
-	memset(&sio, 0, sizeof(struct serial_struct));
-
-	mutex_lock(&portp->port.mutex);
-	sio.line = portp->portnr;
-	sio.port = portp->ioaddr;
-	sio.flags = portp->port.flags;
-	sio.baud_base = portp->baud_base;
-	sio.close_delay = portp->close_delay;
-	sio.closing_wait = portp->closing_wait;
-	sio.custom_divisor = portp->custom_divisor;
-	sio.hub6 = 0;
-	if (portp->uartp == &stl_cd1400uart) {
-		sio.type = PORT_CIRRUS;
-		sio.xmit_fifo_size = CD1400_TXFIFOSIZE;
-	} else {
-		sio.type = PORT_UNKNOWN;
-		sio.xmit_fifo_size = SC26198_TXFIFOSIZE;
-	}
-
-	brdp = stl_brds[portp->brdnr];
-	if (brdp != NULL)
-		sio.irq = brdp->irq;
-	mutex_unlock(&portp->port.mutex);
-
-	return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Set port according to the serial struct info.
- *	At this point we do not do any auto-configure stuff, so we will
- *	just quietly ignore any requests to change irq, etc.
- */
-
-static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
-{
-	struct stlport *	portp = tty->driver_data;
-	struct serial_struct	sio;
-
-	pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
-
-	if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
-		return -EFAULT;
-	mutex_lock(&portp->port.mutex);
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((sio.baud_base != portp->baud_base) ||
-		    (sio.close_delay != portp->close_delay) ||
-		    ((sio.flags & ~ASYNC_USR_MASK) !=
-		    (portp->port.flags & ~ASYNC_USR_MASK))) {
-			mutex_unlock(&portp->port.mutex);
-			return -EPERM;
-		}
-	} 
-
-	portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
-		(sio.flags & ASYNC_USR_MASK);
-	portp->baud_base = sio.baud_base;
-	portp->close_delay = sio.close_delay;
-	portp->closing_wait = sio.closing_wait;
-	portp->custom_divisor = sio.custom_divisor;
-	mutex_unlock(&portp->port.mutex);
-	stl_setport(portp, tty->termios);
-	return 0;
-}
-
-/*****************************************************************************/
-
-static int stl_tiocmget(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -ENODEV;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	return stl_getsignals(portp);
-}
-
-static int stl_tiocmset(struct tty_struct *tty,
-			unsigned int set, unsigned int clear)
-{
-	struct stlport	*portp;
-	int rts = -1, dtr = -1;
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -ENODEV;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if (set & TIOCM_RTS)
-		rts = 1;
-	if (set & TIOCM_DTR)
-		dtr = 1;
-	if (clear & TIOCM_RTS)
-		rts = 0;
-	if (clear & TIOCM_DTR)
-		dtr = 0;
-
-	stl_setsignals(portp, dtr, rts);
-	return 0;
-}
-
-static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
-	struct stlport	*portp;
-	int		rc;
-	void __user *argp = (void __user *)arg;
-
-	pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -ENODEV;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- 	    (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS))
-		if (tty->flags & (1 << TTY_IO_ERROR))
-			return -EIO;
-
-	rc = 0;
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		rc = stl_getserial(portp, argp);
-		break;
-	case TIOCSSERIAL:
-		rc = stl_setserial(tty, argp);
-		break;
-	case COM_GETPORTSTATS:
-		rc = stl_getportstats(tty, portp, argp);
-		break;
-	case COM_CLRPORTSTATS:
-		rc = stl_clrportstats(portp, argp);
-		break;
-	case TIOCSERCONFIG:
-	case TIOCSERGWILD:
-	case TIOCSERSWILD:
-	case TIOCSERGETLSR:
-	case TIOCSERGSTRUCT:
-	case TIOCSERGETMULTI:
-	case TIOCSERSETMULTI:
-	default:
-		rc = -ENOIOCTLCMD;
-		break;
-	}
-	return rc;
-}
-
-/*****************************************************************************/
-
-/*
- *	Start the transmitter again. Just turn TX interrupts back on.
- */
-
-static void stl_start(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_start(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	stl_startrxtx(portp, -1, 1);
-}
-
-/*****************************************************************************/
-
-static void stl_settermios(struct tty_struct *tty, struct ktermios *old)
-{
-	struct stlport	*portp;
-	struct ktermios	*tiosp;
-
-	pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-
-	tiosp = tty->termios;
-	if ((tiosp->c_cflag == old->c_cflag) &&
-	    (tiosp->c_iflag == old->c_iflag))
-		return;
-
-	stl_setport(portp, tiosp);
-	stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0),
-		-1);
-	if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) {
-		tty->hw_stopped = 0;
-		stl_start(tty);
-	}
-	if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
-		wake_up_interruptible(&portp->port.open_wait);
-}
-
-/*****************************************************************************/
-
-/*
- *	Attempt to flow control who ever is sending us data. Based on termios
- *	settings use software or/and hardware flow control.
- */
-
-static void stl_throttle(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_throttle(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	stl_flowctrl(portp, 0);
-}
-
-/*****************************************************************************/
-
-/*
- *	Unflow control the device sending us data...
- */
-
-static void stl_unthrottle(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_unthrottle(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	stl_flowctrl(portp, 1);
-}
-
-/*****************************************************************************/
-
-/*
- *	Stop the transmitter. Basically to do this we will just turn TX
- *	interrupts off.
- */
-
-static void stl_stop(struct tty_struct *tty)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_stop(tty=%p)\n", tty);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-	stl_startrxtx(portp, -1, 0);
-}
-
-/*****************************************************************************/
-
-/*
- *	Hangup this port. This is pretty much like closing the port, only
- *	a little more brutal. No waiting for data to drain. Shutdown the
- *	port and maybe drop signals.
- */
-
-static void stl_hangup(struct tty_struct *tty)
-{
-	struct stlport	*portp = tty->driver_data;
-	pr_debug("stl_hangup(tty=%p)\n", tty);
-
-	if (portp == NULL)
-		return;
-	tty_port_hangup(&portp->port);
-}
-
-/*****************************************************************************/
-
-static int stl_breakctl(struct tty_struct *tty, int state)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return -EINVAL;
-
-	stl_sendbreak(portp, ((state == -1) ? 1 : 2));
-	return 0;
-}
-
-/*****************************************************************************/
-
-static void stl_sendxchar(struct tty_struct *tty, char ch)
-{
-	struct stlport	*portp;
-
-	pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
-
-	portp = tty->driver_data;
-	if (portp == NULL)
-		return;
-
-	if (ch == STOP_CHAR(tty))
-		stl_sendflow(portp, 0);
-	else if (ch == START_CHAR(tty))
-		stl_sendflow(portp, 1);
-	else
-		stl_putchar(tty, ch);
-}
-
-static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr)
-{
-	int	sigs;
-	char sep;
-
-	seq_printf(m, "%d: uart:%s tx:%d rx:%d",
-		portnr, (portp->hwid == 1) ? "SC26198" : "CD1400",
-		(int) portp->stats.txtotal, (int) portp->stats.rxtotal);
-
-	if (portp->stats.rxframing)
-		seq_printf(m, " fe:%d", (int) portp->stats.rxframing);
-	if (portp->stats.rxparity)
-		seq_printf(m, " pe:%d", (int) portp->stats.rxparity);
-	if (portp->stats.rxbreaks)
-		seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks);
-	if (portp->stats.rxoverrun)
-		seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun);
-
-	sigs = stl_getsignals(portp);
-	sep = ' ';
-	if (sigs & TIOCM_RTS) {
-		seq_printf(m, "%c%s", sep, "RTS");
-		sep = '|';
-	}
-	if (sigs & TIOCM_CTS) {
-		seq_printf(m, "%c%s", sep, "CTS");
-		sep = '|';
-	}
-	if (sigs & TIOCM_DTR) {
-		seq_printf(m, "%c%s", sep, "DTR");
-		sep = '|';
-	}
-	if (sigs & TIOCM_CD) {
-		seq_printf(m, "%c%s", sep, "DCD");
-		sep = '|';
-	}
-	if (sigs & TIOCM_DSR) {
-		seq_printf(m, "%c%s", sep, "DSR");
-		sep = '|';
-	}
-	seq_putc(m, '\n');
-}
-
-/*****************************************************************************/
-
-/*
- *	Port info, read from the /proc file system.
- */
-
-static int stl_proc_show(struct seq_file *m, void *v)
-{
-	struct stlbrd	*brdp;
-	struct stlpanel	*panelp;
-	struct stlport	*portp;
-	unsigned int	brdnr, panelnr, portnr;
-	int		totalport;
-
-	totalport = 0;
-
-	seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion);
-
-/*
- *	We scan through for each board, panel and port. The offset is
- *	calculated on the fly, and irrelevant ports are skipped.
- */
-	for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) {
-		brdp = stl_brds[brdnr];
-		if (brdp == NULL)
-			continue;
-		if (brdp->state == 0)
-			continue;
-
-		totalport = brdnr * STL_MAXPORTS;
-		for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) {
-			panelp = brdp->panels[panelnr];
-			if (panelp == NULL)
-				continue;
-
-			for (portnr = 0; portnr < panelp->nrports; portnr++,
-			    totalport++) {
-				portp = panelp->ports[portnr];
-				if (portp == NULL)
-					continue;
-				stl_portinfo(m, portp, totalport);
-			}
-		}
-	}
-	return 0;
-}
-
-static int stl_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, stl_proc_show, NULL);
-}
-
-static const struct file_operations stl_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= stl_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*****************************************************************************/
-
-/*
- *	All board interrupts are vectored through here first. This code then
- *	calls off to the approrpriate board interrupt handlers.
- */
-
-static irqreturn_t stl_intr(int irq, void *dev_id)
-{
-	struct stlbrd *brdp = dev_id;
-
-	pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, brdp->irq);
-
-	return IRQ_RETVAL((* brdp->isr)(brdp));
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for EasyIO board types.
- */
-
-static int stl_eiointr(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	iobase;
-	int		handled = 0;
-
-	spin_lock(&brd_lock);
-	panelp = brdp->panels[0];
-	iobase = panelp->iobase;
-	while (inb(brdp->iostatus) & EIO_INTRPEND) {
-		handled = 1;
-		(* panelp->isr)(panelp, iobase);
-	}
-	spin_unlock(&brd_lock);
-	return handled;
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for ECH-AT board types.
- */
-
-static int stl_echatintr(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	ioaddr, bnknr;
-	int		handled = 0;
-
-	outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
-
-	while (inb(brdp->iostatus) & ECH_INTRPEND) {
-		handled = 1;
-		for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
-			ioaddr = brdp->bnkstataddr[bnknr];
-			if (inb(ioaddr) & ECH_PNLINTRPEND) {
-				panelp = brdp->bnk2panel[bnknr];
-				(* panelp->isr)(panelp, (ioaddr & 0xfffc));
-			}
-		}
-	}
-
-	outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
-
-	return handled;
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for ECH-MCA board types.
- */
-
-static int stl_echmcaintr(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	ioaddr, bnknr;
-	int		handled = 0;
-
-	while (inb(brdp->iostatus) & ECH_INTRPEND) {
-		handled = 1;
-		for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
-			ioaddr = brdp->bnkstataddr[bnknr];
-			if (inb(ioaddr) & ECH_PNLINTRPEND) {
-				panelp = brdp->bnk2panel[bnknr];
-				(* panelp->isr)(panelp, (ioaddr & 0xfffc));
-			}
-		}
-	}
-	return handled;
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for ECH-PCI board types.
- */
-
-static int stl_echpciintr(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	ioaddr, bnknr, recheck;
-	int		handled = 0;
-
-	while (1) {
-		recheck = 0;
-		for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
-			outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl);
-			ioaddr = brdp->bnkstataddr[bnknr];
-			if (inb(ioaddr) & ECH_PNLINTRPEND) {
-				panelp = brdp->bnk2panel[bnknr];
-				(* panelp->isr)(panelp, (ioaddr & 0xfffc));
-				recheck++;
-				handled = 1;
-			}
-		}
-		if (! recheck)
-			break;
-	}
-	return handled;
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for ECH-8/64-PCI board types.
- */
-
-static int stl_echpci64intr(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	ioaddr, bnknr;
-	int		handled = 0;
-
-	while (inb(brdp->ioctrl) & 0x1) {
-		handled = 1;
-		for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
-			ioaddr = brdp->bnkstataddr[bnknr];
-			if (inb(ioaddr) & ECH_PNLINTRPEND) {
-				panelp = brdp->bnk2panel[bnknr];
-				(* panelp->isr)(panelp, (ioaddr & 0xfffc));
-			}
-		}
-	}
-
-	return handled;
-}
-
-/*****************************************************************************/
-
-/*
- *	Initialize all the ports on a panel.
- */
-
-static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp)
-{
-	struct stlport *portp;
-	unsigned int i;
-	int chipmask;
-
-	pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp);
-
-	chipmask = stl_panelinit(brdp, panelp);
-
-/*
- *	All UART's are initialized (if found!). Now go through and setup
- *	each ports data structures.
- */
-	for (i = 0; i < panelp->nrports; i++) {
-		portp = kzalloc(sizeof(struct stlport), GFP_KERNEL);
-		if (!portp) {
-			printk("STALLION: failed to allocate memory "
-				"(size=%Zd)\n", sizeof(struct stlport));
-			break;
-		}
-		tty_port_init(&portp->port);
-		portp->port.ops = &stl_port_ops;
-		portp->magic = STL_PORTMAGIC;
-		portp->portnr = i;
-		portp->brdnr = panelp->brdnr;
-		portp->panelnr = panelp->panelnr;
-		portp->uartp = panelp->uartp;
-		portp->clk = brdp->clk;
-		portp->baud_base = STL_BAUDBASE;
-		portp->close_delay = STL_CLOSEDELAY;
-		portp->closing_wait = 30 * HZ;
-		init_waitqueue_head(&portp->port.open_wait);
-		init_waitqueue_head(&portp->port.close_wait);
-		portp->stats.brd = portp->brdnr;
-		portp->stats.panel = portp->panelnr;
-		portp->stats.port = portp->portnr;
-		panelp->ports[i] = portp;
-		stl_portinit(brdp, panelp, portp);
-	}
-
-	return 0;
-}
-
-static void stl_cleanup_panels(struct stlbrd *brdp)
-{
-	struct stlpanel *panelp;
-	struct stlport *portp;
-	unsigned int j, k;
-	struct tty_struct *tty;
-
-	for (j = 0; j < STL_MAXPANELS; j++) {
-		panelp = brdp->panels[j];
-		if (panelp == NULL)
-			continue;
-		for (k = 0; k < STL_PORTSPERPANEL; k++) {
-			portp = panelp->ports[k];
-			if (portp == NULL)
-				continue;
-			tty = tty_port_tty_get(&portp->port);
-			if (tty != NULL) {
-				stl_hangup(tty);
-				tty_kref_put(tty);
-			}
-			kfree(portp->tx.buf);
-			kfree(portp);
-		}
-		kfree(panelp);
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Try to find and initialize an EasyIO board.
- */
-
-static int __devinit stl_initeio(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	status;
-	char		*name;
-	int		retval;
-
-	pr_debug("stl_initeio(brdp=%p)\n", brdp);
-
-	brdp->ioctrl = brdp->ioaddr1 + 1;
-	brdp->iostatus = brdp->ioaddr1 + 2;
-
-	status = inb(brdp->iostatus);
-	if ((status & EIO_IDBITMASK) == EIO_MK3)
-		brdp->ioctrl++;
-
-/*
- *	Handle board specific stuff now. The real difference is PCI
- *	or not PCI.
- */
-	if (brdp->brdtype == BRD_EASYIOPCI) {
-		brdp->iosize1 = 0x80;
-		brdp->iosize2 = 0x80;
-		name = "serial(EIO-PCI)";
-		outb(0x41, (brdp->ioaddr2 + 0x4c));
-	} else {
-		brdp->iosize1 = 8;
-		name = "serial(EIO)";
-		if ((brdp->irq < 0) || (brdp->irq > 15) ||
-		    (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
-			printk("STALLION: invalid irq=%d for brd=%d\n",
-				brdp->irq, brdp->brdnr);
-			retval = -EINVAL;
-			goto err;
-		}
-		outb((stl_vecmap[brdp->irq] | EIO_0WS |
-			((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)),
-			brdp->ioctrl);
-	}
-
-	retval = -EBUSY;
-	if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
-		printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
-			"%x conflicts with another device\n", brdp->brdnr, 
-			brdp->ioaddr1);
-		goto err;
-	}
-	
-	if (brdp->iosize2 > 0)
-		if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
-			printk(KERN_WARNING "STALLION: Warning, board %d I/O "
-				"address %x conflicts with another device\n",
-				brdp->brdnr, brdp->ioaddr2);
-			printk(KERN_WARNING "STALLION: Warning, also "
-				"releasing board %d I/O address %x \n", 
-				brdp->brdnr, brdp->ioaddr1);
-			goto err_rel1;
-		}
-
-/*
- *	Everything looks OK, so let's go ahead and probe for the hardware.
- */
-	brdp->clk = CD1400_CLK;
-	brdp->isr = stl_eiointr;
-
-	retval = -ENODEV;
-	switch (status & EIO_IDBITMASK) {
-	case EIO_8PORTM:
-		brdp->clk = CD1400_CLK8M;
-		/* fall thru */
-	case EIO_8PORTRS:
-	case EIO_8PORTDI:
-		brdp->nrports = 8;
-		break;
-	case EIO_4PORTRS:
-		brdp->nrports = 4;
-		break;
-	case EIO_MK3:
-		switch (status & EIO_BRDMASK) {
-		case ID_BRD4:
-			brdp->nrports = 4;
-			break;
-		case ID_BRD8:
-			brdp->nrports = 8;
-			break;
-		case ID_BRD16:
-			brdp->nrports = 16;
-			break;
-		default:
-			goto err_rel2;
-		}
-		break;
-	default:
-		goto err_rel2;
-	}
-
-/*
- *	We have verified that the board is actually present, so now we
- *	can complete the setup.
- */
-
-	panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
-	if (!panelp) {
-		printk(KERN_WARNING "STALLION: failed to allocate memory "
-			"(size=%Zd)\n", sizeof(struct stlpanel));
-		retval = -ENOMEM;
-		goto err_rel2;
-	}
-
-	panelp->magic = STL_PANELMAGIC;
-	panelp->brdnr = brdp->brdnr;
-	panelp->panelnr = 0;
-	panelp->nrports = brdp->nrports;
-	panelp->iobase = brdp->ioaddr1;
-	panelp->hwid = status;
-	if ((status & EIO_IDBITMASK) == EIO_MK3) {
-		panelp->uartp = &stl_sc26198uart;
-		panelp->isr = stl_sc26198intr;
-	} else {
-		panelp->uartp = &stl_cd1400uart;
-		panelp->isr = stl_cd1400eiointr;
-	}
-
-	brdp->panels[0] = panelp;
-	brdp->nrpanels = 1;
-	brdp->state |= BRD_FOUND;
-	brdp->hwid = status;
-	if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
-		printk("STALLION: failed to register interrupt "
-		    "routine for %s irq=%d\n", name, brdp->irq);
-		retval = -ENODEV;
-		goto err_fr;
-	}
-
-	return 0;
-err_fr:
-	stl_cleanup_panels(brdp);
-err_rel2:
-	if (brdp->iosize2 > 0)
-		release_region(brdp->ioaddr2, brdp->iosize2);
-err_rel1:
-	release_region(brdp->ioaddr1, brdp->iosize1);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Try to find an ECH board and initialize it. This code is capable of
- *	dealing with all types of ECH board.
- */
-
-static int __devinit stl_initech(struct stlbrd *brdp)
-{
-	struct stlpanel	*panelp;
-	unsigned int	status, nxtid, ioaddr, conflict, panelnr, banknr, i;
-	int		retval;
-	char		*name;
-
-	pr_debug("stl_initech(brdp=%p)\n", brdp);
-
-	status = 0;
-	conflict = 0;
-
-/*
- *	Set up the initial board register contents for boards. This varies a
- *	bit between the different board types. So we need to handle each
- *	separately. Also do a check that the supplied IRQ is good.
- */
-	switch (brdp->brdtype) {
-
-	case BRD_ECH:
-		brdp->isr = stl_echatintr;
-		brdp->ioctrl = brdp->ioaddr1 + 1;
-		brdp->iostatus = brdp->ioaddr1 + 1;
-		status = inb(brdp->iostatus);
-		if ((status & ECH_IDBITMASK) != ECH_ID) {
-			retval = -ENODEV;
-			goto err;
-		}
-		if ((brdp->irq < 0) || (brdp->irq > 15) ||
-		    (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
-			printk("STALLION: invalid irq=%d for brd=%d\n",
-				brdp->irq, brdp->brdnr);
-			retval = -EINVAL;
-			goto err;
-		}
-		status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1);
-		status |= (stl_vecmap[brdp->irq] << 1);
-		outb((status | ECH_BRDRESET), brdp->ioaddr1);
-		brdp->ioctrlval = ECH_INTENABLE |
-			((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE);
-		for (i = 0; i < 10; i++)
-			outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
-		brdp->iosize1 = 2;
-		brdp->iosize2 = 32;
-		name = "serial(EC8/32)";
-		outb(status, brdp->ioaddr1);
-		break;
-
-	case BRD_ECHMC:
-		brdp->isr = stl_echmcaintr;
-		brdp->ioctrl = brdp->ioaddr1 + 0x20;
-		brdp->iostatus = brdp->ioctrl;
-		status = inb(brdp->iostatus);
-		if ((status & ECH_IDBITMASK) != ECH_ID) {
-			retval = -ENODEV;
-			goto err;
-		}
-		if ((brdp->irq < 0) || (brdp->irq > 15) ||
-		    (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
-			printk("STALLION: invalid irq=%d for brd=%d\n",
-				brdp->irq, brdp->brdnr);
-			retval = -EINVAL;
-			goto err;
-		}
-		outb(ECHMC_BRDRESET, brdp->ioctrl);
-		outb(ECHMC_INTENABLE, brdp->ioctrl);
-		brdp->iosize1 = 64;
-		name = "serial(EC8/32-MC)";
-		break;
-
-	case BRD_ECHPCI:
-		brdp->isr = stl_echpciintr;
-		brdp->ioctrl = brdp->ioaddr1 + 2;
-		brdp->iosize1 = 4;
-		brdp->iosize2 = 8;
-		name = "serial(EC8/32-PCI)";
-		break;
-
-	case BRD_ECH64PCI:
-		brdp->isr = stl_echpci64intr;
-		brdp->ioctrl = brdp->ioaddr2 + 0x40;
-		outb(0x43, (brdp->ioaddr1 + 0x4c));
-		brdp->iosize1 = 0x80;
-		brdp->iosize2 = 0x80;
-		name = "serial(EC8/64-PCI)";
-		break;
-
-	default:
-		printk("STALLION: unknown board type=%d\n", brdp->brdtype);
-		retval = -EINVAL;
-		goto err;
-	}
-
-/*
- *	Check boards for possible IO address conflicts and return fail status 
- * 	if an IO conflict found.
- */
-	retval = -EBUSY;
-	if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
-		printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
-			"%x conflicts with another device\n", brdp->brdnr, 
-			brdp->ioaddr1);
-		goto err;
-	}
-	
-	if (brdp->iosize2 > 0)
-		if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
-			printk(KERN_WARNING "STALLION: Warning, board %d I/O "
-				"address %x conflicts with another device\n",
-				brdp->brdnr, brdp->ioaddr2);
-			printk(KERN_WARNING "STALLION: Warning, also "
-				"releasing board %d I/O address %x \n", 
-				brdp->brdnr, brdp->ioaddr1);
-			goto err_rel1;
-		}
-
-/*
- *	Scan through the secondary io address space looking for panels.
- *	As we find'em allocate and initialize panel structures for each.
- */
-	brdp->clk = CD1400_CLK;
-	brdp->hwid = status;
-
-	ioaddr = brdp->ioaddr2;
-	banknr = 0;
-	panelnr = 0;
-	nxtid = 0;
-
-	for (i = 0; i < STL_MAXPANELS; i++) {
-		if (brdp->brdtype == BRD_ECHPCI) {
-			outb(nxtid, brdp->ioctrl);
-			ioaddr = brdp->ioaddr2;
-		}
-		status = inb(ioaddr + ECH_PNLSTATUS);
-		if ((status & ECH_PNLIDMASK) != nxtid)
-			break;
-		panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
-		if (!panelp) {
-			printk("STALLION: failed to allocate memory "
-				"(size=%Zd)\n", sizeof(struct stlpanel));
-			retval = -ENOMEM;
-			goto err_fr;
-		}
-		panelp->magic = STL_PANELMAGIC;
-		panelp->brdnr = brdp->brdnr;
-		panelp->panelnr = panelnr;
-		panelp->iobase = ioaddr;
-		panelp->pagenr = nxtid;
-		panelp->hwid = status;
-		brdp->bnk2panel[banknr] = panelp;
-		brdp->bnkpageaddr[banknr] = nxtid;
-		brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS;
-
-		if (status & ECH_PNLXPID) {
-			panelp->uartp = &stl_sc26198uart;
-			panelp->isr = stl_sc26198intr;
-			if (status & ECH_PNL16PORT) {
-				panelp->nrports = 16;
-				brdp->bnk2panel[banknr] = panelp;
-				brdp->bnkpageaddr[banknr] = nxtid;
-				brdp->bnkstataddr[banknr++] = ioaddr + 4 +
-					ECH_PNLSTATUS;
-			} else
-				panelp->nrports = 8;
-		} else {
-			panelp->uartp = &stl_cd1400uart;
-			panelp->isr = stl_cd1400echintr;
-			if (status & ECH_PNL16PORT) {
-				panelp->nrports = 16;
-				panelp->ackmask = 0x80;
-				if (brdp->brdtype != BRD_ECHPCI)
-					ioaddr += EREG_BANKSIZE;
-				brdp->bnk2panel[banknr] = panelp;
-				brdp->bnkpageaddr[banknr] = ++nxtid;
-				brdp->bnkstataddr[banknr++] = ioaddr +
-					ECH_PNLSTATUS;
-			} else {
-				panelp->nrports = 8;
-				panelp->ackmask = 0xc0;
-			}
-		}
-
-		nxtid++;
-		ioaddr += EREG_BANKSIZE;
-		brdp->nrports += panelp->nrports;
-		brdp->panels[panelnr++] = panelp;
-		if ((brdp->brdtype != BRD_ECHPCI) &&
-		    (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) {
-			retval = -EINVAL;
-			goto err_fr;
-		}
-	}
-
-	brdp->nrpanels = panelnr;
-	brdp->nrbnks = banknr;
-	if (brdp->brdtype == BRD_ECH)
-		outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
-
-	brdp->state |= BRD_FOUND;
-	if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
-		printk("STALLION: failed to register interrupt "
-		    "routine for %s irq=%d\n", name, brdp->irq);
-		retval = -ENODEV;
-		goto err_fr;
-	}
-
-	return 0;
-err_fr:
-	stl_cleanup_panels(brdp);
-	if (brdp->iosize2 > 0)
-		release_region(brdp->ioaddr2, brdp->iosize2);
-err_rel1:
-	release_region(brdp->ioaddr1, brdp->iosize1);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Initialize and configure the specified board.
- *	Scan through all the boards in the configuration and see what we
- *	can find. Handle EIO and the ECH boards a little differently here
- *	since the initial search and setup is very different.
- */
-
-static int __devinit stl_brdinit(struct stlbrd *brdp)
-{
-	int i, retval;
-
-	pr_debug("stl_brdinit(brdp=%p)\n", brdp);
-
-	switch (brdp->brdtype) {
-	case BRD_EASYIO:
-	case BRD_EASYIOPCI:
-		retval = stl_initeio(brdp);
-		if (retval)
-			goto err;
-		break;
-	case BRD_ECH:
-	case BRD_ECHMC:
-	case BRD_ECHPCI:
-	case BRD_ECH64PCI:
-		retval = stl_initech(brdp);
-		if (retval)
-			goto err;
-		break;
-	default:
-		printk("STALLION: board=%d is unknown board type=%d\n",
-			brdp->brdnr, brdp->brdtype);
-		retval = -ENODEV;
-		goto err;
-	}
-
-	if ((brdp->state & BRD_FOUND) == 0) {
-		printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
-			stl_brdnames[brdp->brdtype], brdp->brdnr,
-			brdp->ioaddr1, brdp->irq);
-		goto err_free;
-	}
-
-	for (i = 0; i < STL_MAXPANELS; i++)
-		if (brdp->panels[i] != NULL)
-			stl_initports(brdp, brdp->panels[i]);
-
-	printk("STALLION: %s found, board=%d io=%x irq=%d "
-		"nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype],
-		brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels,
-		brdp->nrports);
-
-	return 0;
-err_free:
-	free_irq(brdp->irq, brdp);
-
-	stl_cleanup_panels(brdp);
-
-	release_region(brdp->ioaddr1, brdp->iosize1);
-	if (brdp->iosize2 > 0)
-		release_region(brdp->ioaddr2, brdp->iosize2);
-err:
-	return retval;
-}
-
-/*****************************************************************************/
-
-/*
- *	Find the next available board number that is free.
- */
-
-static int __devinit stl_getbrdnr(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < STL_MAXBRDS; i++)
-		if (stl_brds[i] == NULL) {
-			if (i >= stl_nrbrds)
-				stl_nrbrds = i + 1;
-			return i;
-		}
-
-	return -1;
-}
-
-/*****************************************************************************/
-/*
- *	We have a Stallion board. Allocate a board structure and
- *	initialize it. Read its IO and IRQ resources from PCI
- *	configuration space.
- */
-
-static int __devinit stl_pciprobe(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-	struct stlbrd *brdp;
-	unsigned int i, brdtype = ent->driver_data;
-	int brdnr, retval = -ENODEV;
-
-	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
-		goto err;
-
-	retval = pci_enable_device(pdev);
-	if (retval)
-		goto err;
-	brdp = stl_allocbrd();
-	if (brdp == NULL) {
-		retval = -ENOMEM;
-		goto err;
-	}
-	mutex_lock(&stl_brdslock);
-	brdnr = stl_getbrdnr();
-	if (brdnr < 0) {
-		dev_err(&pdev->dev, "too many boards found, "
-			"maximum supported %d\n", STL_MAXBRDS);
-		mutex_unlock(&stl_brdslock);
-		retval = -ENODEV;
-		goto err_fr;
-	}
-	brdp->brdnr = (unsigned int)brdnr;
-	stl_brds[brdp->brdnr] = brdp;
-	mutex_unlock(&stl_brdslock);
-
-	brdp->brdtype = brdtype;
-	brdp->state |= STL_PROBED;
-
-/*
- *	We have all resources from the board, so let's setup the actual
- *	board structure now.
- */
-	switch (brdtype) {
-	case BRD_ECHPCI:
-		brdp->ioaddr2 = pci_resource_start(pdev, 0);
-		brdp->ioaddr1 = pci_resource_start(pdev, 1);
-		break;
-	case BRD_ECH64PCI:
-		brdp->ioaddr2 = pci_resource_start(pdev, 2);
-		brdp->ioaddr1 = pci_resource_start(pdev, 1);
-		break;
-	case BRD_EASYIOPCI:
-		brdp->ioaddr1 = pci_resource_start(pdev, 2);
-		brdp->ioaddr2 = pci_resource_start(pdev, 1);
-		break;
-	default:
-		dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype);
-		break;
-	}
-
-	brdp->irq = pdev->irq;
-	retval = stl_brdinit(brdp);
-	if (retval)
-		goto err_null;
-
-	pci_set_drvdata(pdev, brdp);
-
-	for (i = 0; i < brdp->nrports; i++)
-		tty_register_device(stl_serial,
-				brdp->brdnr * STL_MAXPORTS + i, &pdev->dev);
-
-	return 0;
-err_null:
-	stl_brds[brdp->brdnr] = NULL;
-err_fr:
-	kfree(brdp);
-err:
-	return retval;
-}
-
-static void __devexit stl_pciremove(struct pci_dev *pdev)
-{
-	struct stlbrd *brdp = pci_get_drvdata(pdev);
-	unsigned int i;
-
-	free_irq(brdp->irq, brdp);
-
-	stl_cleanup_panels(brdp);
-
-	release_region(brdp->ioaddr1, brdp->iosize1);
-	if (brdp->iosize2 > 0)
-		release_region(brdp->ioaddr2, brdp->iosize2);
-
-	for (i = 0; i < brdp->nrports; i++)
-		tty_unregister_device(stl_serial,
-				brdp->brdnr * STL_MAXPORTS + i);
-
-	stl_brds[brdp->brdnr] = NULL;
-	kfree(brdp);
-}
-
-static struct pci_driver stl_pcidriver = {
-	.name = "stallion",
-	.id_table = stl_pcibrds,
-	.probe = stl_pciprobe,
-	.remove = __devexit_p(stl_pciremove)
-};
-
-/*****************************************************************************/
-
-/*
- *	Return the board stats structure to user app.
- */
-
-static int stl_getbrdstats(combrd_t __user *bp)
-{
-	combrd_t	stl_brdstats;
-	struct stlbrd	*brdp;
-	struct stlpanel	*panelp;
-	unsigned int i;
-
-	if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t)))
-		return -EFAULT;
-	if (stl_brdstats.brd >= STL_MAXBRDS)
-		return -ENODEV;
-	brdp = stl_brds[stl_brdstats.brd];
-	if (brdp == NULL)
-		return -ENODEV;
-
-	memset(&stl_brdstats, 0, sizeof(combrd_t));
-	stl_brdstats.brd = brdp->brdnr;
-	stl_brdstats.type = brdp->brdtype;
-	stl_brdstats.hwid = brdp->hwid;
-	stl_brdstats.state = brdp->state;
-	stl_brdstats.ioaddr = brdp->ioaddr1;
-	stl_brdstats.ioaddr2 = brdp->ioaddr2;
-	stl_brdstats.irq = brdp->irq;
-	stl_brdstats.nrpanels = brdp->nrpanels;
-	stl_brdstats.nrports = brdp->nrports;
-	for (i = 0; i < brdp->nrpanels; i++) {
-		panelp = brdp->panels[i];
-		stl_brdstats.panels[i].panel = i;
-		stl_brdstats.panels[i].hwid = panelp->hwid;
-		stl_brdstats.panels[i].nrports = panelp->nrports;
-	}
-
-	return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Resolve the referenced port number into a port struct pointer.
- */
-
-static struct stlport *stl_getport(int brdnr, int panelnr, int portnr)
-{
-	struct stlbrd	*brdp;
-	struct stlpanel	*panelp;
-
-	if (brdnr < 0 || brdnr >= STL_MAXBRDS)
-		return NULL;
-	brdp = stl_brds[brdnr];
-	if (brdp == NULL)
-		return NULL;
-	if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels)
-		return NULL;
-	panelp = brdp->panels[panelnr];
-	if (panelp == NULL)
-		return NULL;
-	if (portnr < 0 || (unsigned int)portnr >= panelp->nrports)
-		return NULL;
-	return panelp->ports[portnr];
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the port stats structure to user app. A NULL port struct
- *	pointer passed in means that we need to find out from the app
- *	what port to get stats for (used through board control device).
- */
-
-static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp)
-{
-	comstats_t	stl_comstats;
-	unsigned char	*head, *tail;
-	unsigned long	flags;
-
-	if (!portp) {
-		if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
-			return -EFAULT;
-		portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
-			stl_comstats.port);
-		if (portp == NULL)
-			return -ENODEV;
-	}
-
-	mutex_lock(&portp->port.mutex);
-	portp->stats.state = portp->istate;
-	portp->stats.flags = portp->port.flags;
-	portp->stats.hwid = portp->hwid;
-
-	portp->stats.ttystate = 0;
-	portp->stats.cflags = 0;
-	portp->stats.iflags = 0;
-	portp->stats.oflags = 0;
-	portp->stats.lflags = 0;
-	portp->stats.rxbuffered = 0;
-
-	spin_lock_irqsave(&stallion_lock, flags);
-	if (tty != NULL && portp->port.tty == tty) {
-		portp->stats.ttystate = tty->flags;
-		/* No longer available as a statistic */
-		portp->stats.rxbuffered = 1; /*tty->flip.count; */
-		if (tty->termios != NULL) {
-			portp->stats.cflags = tty->termios->c_cflag;
-			portp->stats.iflags = tty->termios->c_iflag;
-			portp->stats.oflags = tty->termios->c_oflag;
-			portp->stats.lflags = tty->termios->c_lflag;
-		}
-	}
-	spin_unlock_irqrestore(&stallion_lock, flags);
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	portp->stats.txbuffered = (head >= tail) ? (head - tail) :
-		(STL_TXBUFSIZE - (tail - head));
-
-	portp->stats.signals = (unsigned long) stl_getsignals(portp);
-	mutex_unlock(&portp->port.mutex);
-
-	return copy_to_user(cp, &portp->stats,
-			    sizeof(comstats_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Clear the port stats structure. We also return it zeroed out...
- */
-
-static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
-{
-	comstats_t	stl_comstats;
-
-	if (!portp) {
-		if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
-			return -EFAULT;
-		portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
-			stl_comstats.port);
-		if (portp == NULL)
-			return -ENODEV;
-	}
-
-	mutex_lock(&portp->port.mutex);
-	memset(&portp->stats, 0, sizeof(comstats_t));
-	portp->stats.brd = portp->brdnr;
-	portp->stats.panel = portp->panelnr;
-	portp->stats.port = portp->portnr;
-	mutex_unlock(&portp->port.mutex);
-	return copy_to_user(cp, &portp->stats,
-			    sizeof(comstats_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the entire driver ports structure to a user app.
- */
-
-static int stl_getportstruct(struct stlport __user *arg)
-{
-	struct stlport	stl_dummyport;
-	struct stlport	*portp;
-
-	if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport)))
-		return -EFAULT;
-	portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr,
-		 stl_dummyport.portnr);
-	if (!portp)
-		return -ENODEV;
-	return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the entire driver board structure to a user app.
- */
-
-static int stl_getbrdstruct(struct stlbrd __user *arg)
-{
-	struct stlbrd	stl_dummybrd;
-	struct stlbrd	*brdp;
-
-	if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd)))
-		return -EFAULT;
-	if (stl_dummybrd.brdnr >= STL_MAXBRDS)
-		return -ENODEV;
-	brdp = stl_brds[stl_dummybrd.brdnr];
-	if (!brdp)
-		return -ENODEV;
-	return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	The "staliomem" device is also required to do some special operations
- *	on the board and/or ports. In this driver it is mostly used for stats
- *	collection.
- */
-
-static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-{
-	int	brdnr, rc;
-	void __user *argp = (void __user *)arg;
-
-	pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg);
-
-	brdnr = iminor(fp->f_dentry->d_inode);
-	if (brdnr >= STL_MAXBRDS)
-		return -ENODEV;
-	rc = 0;
-
-	switch (cmd) {
-	case COM_GETPORTSTATS:
-		rc = stl_getportstats(NULL, NULL, argp);
-		break;
-	case COM_CLRPORTSTATS:
-		rc = stl_clrportstats(NULL, argp);
-		break;
-	case COM_GETBRDSTATS:
-		rc = stl_getbrdstats(argp);
-		break;
-	case COM_READPORT:
-		rc = stl_getportstruct(argp);
-		break;
-	case COM_READBOARD:
-		rc = stl_getbrdstruct(argp);
-		break;
-	default:
-		rc = -ENOIOCTLCMD;
-		break;
-	}
-	return rc;
-}
-
-static const struct tty_operations stl_ops = {
-	.open = stl_open,
-	.close = stl_close,
-	.write = stl_write,
-	.put_char = stl_putchar,
-	.flush_chars = stl_flushchars,
-	.write_room = stl_writeroom,
-	.chars_in_buffer = stl_charsinbuffer,
-	.ioctl = stl_ioctl,
-	.set_termios = stl_settermios,
-	.throttle = stl_throttle,
-	.unthrottle = stl_unthrottle,
-	.stop = stl_stop,
-	.start = stl_start,
-	.hangup = stl_hangup,
-	.flush_buffer = stl_flushbuffer,
-	.break_ctl = stl_breakctl,
-	.wait_until_sent = stl_waituntilsent,
-	.send_xchar = stl_sendxchar,
-	.tiocmget = stl_tiocmget,
-	.tiocmset = stl_tiocmset,
-	.proc_fops = &stl_proc_fops,
-};
-
-static const struct tty_port_operations stl_port_ops = {
-	.carrier_raised = stl_carrier_raised,
-	.dtr_rts = stl_dtr_rts,
-	.activate = stl_activate,
-	.shutdown = stl_shutdown,
-};
-
-/*****************************************************************************/
-/*                       CD1400 HARDWARE FUNCTIONS                           */
-/*****************************************************************************/
-
-/*
- *	These functions get/set/update the registers of the cd1400 UARTs.
- *	Access to the cd1400 registers is via an address/data io port pair.
- *	(Maybe should make this inline...)
- */
-
-static int stl_cd1400getreg(struct stlport *portp, int regnr)
-{
-	outb((regnr + portp->uartaddr), portp->ioaddr);
-	return inb(portp->ioaddr + EREG_DATA);
-}
-
-static void stl_cd1400setreg(struct stlport *portp, int regnr, int value)
-{
-	outb(regnr + portp->uartaddr, portp->ioaddr);
-	outb(value, portp->ioaddr + EREG_DATA);
-}
-
-static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value)
-{
-	outb(regnr + portp->uartaddr, portp->ioaddr);
-	if (inb(portp->ioaddr + EREG_DATA) != value) {
-		outb(value, portp->ioaddr + EREG_DATA);
-		return 1;
-	}
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Inbitialize the UARTs in a panel. We don't care what sort of board
- *	these ports are on - since the port io registers are almost
- *	identical when dealing with ports.
- */
-
-static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
-{
-	unsigned int	gfrcr;
-	int		chipmask, i, j;
-	int		nrchips, uartaddr, ioaddr;
-	unsigned long   flags;
-
-	pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(panelp->brdnr, panelp->pagenr);
-
-/*
- *	Check that each chip is present and started up OK.
- */
-	chipmask = 0;
-	nrchips = panelp->nrports / CD1400_PORTS;
-	for (i = 0; i < nrchips; i++) {
-		if (brdp->brdtype == BRD_ECHPCI) {
-			outb((panelp->pagenr + (i >> 1)), brdp->ioctrl);
-			ioaddr = panelp->iobase;
-		} else
-			ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1));
-		uartaddr = (i & 0x01) ? 0x080 : 0;
-		outb((GFRCR + uartaddr), ioaddr);
-		outb(0, (ioaddr + EREG_DATA));
-		outb((CCR + uartaddr), ioaddr);
-		outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
-		outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
-		outb((GFRCR + uartaddr), ioaddr);
-		for (j = 0; j < CCR_MAXWAIT; j++)
-			if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0)
-				break;
-
-		if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) {
-			printk("STALLION: cd1400 not responding, "
-				"brd=%d panel=%d chip=%d\n",
-				panelp->brdnr, panelp->panelnr, i);
-			continue;
-		}
-		chipmask |= (0x1 << i);
-		outb((PPR + uartaddr), ioaddr);
-		outb(PPR_SCALAR, (ioaddr + EREG_DATA));
-	}
-
-	BRDDISABLE(panelp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-	return chipmask;
-}
-
-/*****************************************************************************/
-
-/*
- *	Initialize hardware specific port registers.
- */
-
-static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
-{
-	unsigned long flags;
-	pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
-			panelp, portp);
-
-	if ((brdp == NULL) || (panelp == NULL) ||
-	    (portp == NULL))
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
-		(portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
-	portp->uartaddr = (portp->portnr & 0x04) << 5;
-	portp->pagenr = panelp->pagenr + (portp->portnr >> 3);
-
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
-	portp->hwid = stl_cd1400getreg(portp, GFRCR);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Wait for the command register to be ready. We will poll this,
- *	since it won't usually take too long to be ready.
- */
-
-static void stl_cd1400ccrwait(struct stlport *portp)
-{
-	int	i;
-
-	for (i = 0; i < CCR_MAXWAIT; i++)
-		if (stl_cd1400getreg(portp, CCR) == 0)
-			return;
-
-	printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
-		portp->portnr, portp->panelnr, portp->brdnr);
-}
-
-/*****************************************************************************/
-
-/*
- *	Set up the cd1400 registers for a port based on the termios port
- *	settings.
- */
-
-static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp)
-{
-	struct stlbrd	*brdp;
-	unsigned long	flags;
-	unsigned int	clkdiv, baudrate;
-	unsigned char	cor1, cor2, cor3;
-	unsigned char	cor4, cor5, ccr;
-	unsigned char	srer, sreron, sreroff;
-	unsigned char	mcor1, mcor2, rtpr;
-	unsigned char	clk, div;
-
-	cor1 = 0;
-	cor2 = 0;
-	cor3 = 0;
-	cor4 = 0;
-	cor5 = 0;
-	ccr = 0;
-	rtpr = 0;
-	clk = 0;
-	div = 0;
-	mcor1 = 0;
-	mcor2 = 0;
-	sreron = 0;
-	sreroff = 0;
-
-	brdp = stl_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-/*
- *	Set up the RX char ignore mask with those RX error types we
- *	can ignore. We can get the cd1400 to help us out a little here,
- *	it will ignore parity errors and breaks for us.
- */
-	portp->rxignoremsk = 0;
-	if (tiosp->c_iflag & IGNPAR) {
-		portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN);
-		cor1 |= COR1_PARIGNORE;
-	}
-	if (tiosp->c_iflag & IGNBRK) {
-		portp->rxignoremsk |= ST_BREAK;
-		cor4 |= COR4_IGNBRK;
-	}
-
-	portp->rxmarkmsk = ST_OVERRUN;
-	if (tiosp->c_iflag & (INPCK | PARMRK))
-		portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING);
-	if (tiosp->c_iflag & BRKINT)
-		portp->rxmarkmsk |= ST_BREAK;
-
-/*
- *	Go through the char size, parity and stop bits and set all the
- *	option register appropriately.
- */
-	switch (tiosp->c_cflag & CSIZE) {
-	case CS5:
-		cor1 |= COR1_CHL5;
-		break;
-	case CS6:
-		cor1 |= COR1_CHL6;
-		break;
-	case CS7:
-		cor1 |= COR1_CHL7;
-		break;
-	default:
-		cor1 |= COR1_CHL8;
-		break;
-	}
-
-	if (tiosp->c_cflag & CSTOPB)
-		cor1 |= COR1_STOP2;
-	else
-		cor1 |= COR1_STOP1;
-
-	if (tiosp->c_cflag & PARENB) {
-		if (tiosp->c_cflag & PARODD)
-			cor1 |= (COR1_PARENB | COR1_PARODD);
-		else
-			cor1 |= (COR1_PARENB | COR1_PAREVEN);
-	} else {
-		cor1 |= COR1_PARNONE;
-	}
-
-/*
- *	Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
- *	space for hardware flow control and the like. This should be set to
- *	VMIN. Also here we will set the RX data timeout to 10ms - this should
- *	really be based on VTIME.
- */
-	cor3 |= FIFO_RXTHRESHOLD;
-	rtpr = 2;
-
-/*
- *	Calculate the baud rate timers. For now we will just assume that
- *	the input and output baud are the same. Could have used a baud
- *	table here, but this way we can generate virtually any baud rate
- *	we like!
- */
-	baudrate = tiosp->c_cflag & CBAUD;
-	if (baudrate & CBAUDEX) {
-		baudrate &= ~CBAUDEX;
-		if ((baudrate < 1) || (baudrate > 4))
-			tiosp->c_cflag &= ~CBAUDEX;
-		else
-			baudrate += 15;
-	}
-	baudrate = stl_baudrates[baudrate];
-	if ((tiosp->c_cflag & CBAUD) == B38400) {
-		if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			baudrate = 57600;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			baudrate = 115200;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			baudrate = 230400;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			baudrate = 460800;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
-			baudrate = (portp->baud_base / portp->custom_divisor);
-	}
-	if (baudrate > STL_CD1400MAXBAUD)
-		baudrate = STL_CD1400MAXBAUD;
-
-	if (baudrate > 0) {
-		for (clk = 0; clk < CD1400_NUMCLKS; clk++) {
-			clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate;
-			if (clkdiv < 0x100)
-				break;
-		}
-		div = (unsigned char) clkdiv;
-	}
-
-/*
- *	Check what form of modem signaling is required and set it up.
- */
-	if ((tiosp->c_cflag & CLOCAL) == 0) {
-		mcor1 |= MCOR1_DCD;
-		mcor2 |= MCOR2_DCD;
-		sreron |= SRER_MODEM;
-		portp->port.flags |= ASYNC_CHECK_CD;
-	} else
-		portp->port.flags &= ~ASYNC_CHECK_CD;
-
-/*
- *	Setup cd1400 enhanced modes if we can. In particular we want to
- *	handle as much of the flow control as possible automatically. As
- *	well as saving a few CPU cycles it will also greatly improve flow
- *	control reliability.
- */
-	if (tiosp->c_iflag & IXON) {
-		cor2 |= COR2_TXIBE;
-		cor3 |= COR3_SCD12;
-		if (tiosp->c_iflag & IXANY)
-			cor2 |= COR2_IXM;
-	}
-
-	if (tiosp->c_cflag & CRTSCTS) {
-		cor2 |= COR2_CTSAE;
-		mcor1 |= FIFO_RTSTHRESHOLD;
-	}
-
-/*
- *	All cd1400 register values calculated so go through and set
- *	them all up.
- */
-
-	pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
-		portp->portnr, portp->panelnr, portp->brdnr);
-	pr_debug("    cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
-		cor1, cor2, cor3, cor4, cor5);
-	pr_debug("    mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
-		mcor1, mcor2, rtpr, sreron, sreroff);
-	pr_debug("    tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
-	pr_debug("    schr1=%x schr2=%x schr3=%x schr4=%x\n",
-		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
-		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
-	srer = stl_cd1400getreg(portp, SRER);
-	stl_cd1400setreg(portp, SRER, 0);
-	if (stl_cd1400updatereg(portp, COR1, cor1))
-		ccr = 1;
-	if (stl_cd1400updatereg(portp, COR2, cor2))
-		ccr = 1;
-	if (stl_cd1400updatereg(portp, COR3, cor3))
-		ccr = 1;
-	if (ccr) {
-		stl_cd1400ccrwait(portp);
-		stl_cd1400setreg(portp, CCR, CCR_CORCHANGE);
-	}
-	stl_cd1400setreg(portp, COR4, cor4);
-	stl_cd1400setreg(portp, COR5, cor5);
-	stl_cd1400setreg(portp, MCOR1, mcor1);
-	stl_cd1400setreg(portp, MCOR2, mcor2);
-	if (baudrate > 0) {
-		stl_cd1400setreg(portp, TCOR, clk);
-		stl_cd1400setreg(portp, TBPR, div);
-		stl_cd1400setreg(portp, RCOR, clk);
-		stl_cd1400setreg(portp, RBPR, div);
-	}
-	stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]);
-	stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]);
-	stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]);
-	stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]);
-	stl_cd1400setreg(portp, RTPR, rtpr);
-	mcor1 = stl_cd1400getreg(portp, MSVR1);
-	if (mcor1 & MSVR1_DCD)
-		portp->sigs |= TIOCM_CD;
-	else
-		portp->sigs &= ~TIOCM_CD;
-	stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Set the state of the DTR and RTS signals.
- */
-
-static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts)
-{
-	unsigned char	msvr1, msvr2;
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n",
-			portp, dtr, rts);
-
-	msvr1 = 0;
-	msvr2 = 0;
-	if (dtr > 0)
-		msvr1 = MSVR1_DTR;
-	if (rts > 0)
-		msvr2 = MSVR2_RTS;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	if (rts >= 0)
-		stl_cd1400setreg(portp, MSVR2, msvr2);
-	if (dtr >= 0)
-		stl_cd1400setreg(portp, MSVR1, msvr1);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the state of the signals.
- */
-
-static int stl_cd1400getsignals(struct stlport *portp)
-{
-	unsigned char	msvr1, msvr2;
-	unsigned long	flags;
-	int		sigs;
-
-	pr_debug("stl_cd1400getsignals(portp=%p)\n", portp);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	msvr1 = stl_cd1400getreg(portp, MSVR1);
-	msvr2 = stl_cd1400getreg(portp, MSVR2);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	sigs = 0;
-	sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
-	sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0;
-	sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0;
-	sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0;
-#if 0
-	sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0;
-	sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0;
-#else
-	sigs |= TIOCM_DSR;
-#endif
-	return sigs;
-}
-
-/*****************************************************************************/
-
-/*
- *	Enable/Disable the Transmitter and/or Receiver.
- */
-
-static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx)
-{
-	unsigned char	ccr;
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
-	ccr = 0;
-
-	if (tx == 0)
-		ccr |= CCR_TXDISABLE;
-	else if (tx > 0)
-		ccr |= CCR_TXENABLE;
-	if (rx == 0)
-		ccr |= CCR_RXDISABLE;
-	else if (rx > 0)
-		ccr |= CCR_RXENABLE;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400ccrwait(portp);
-	stl_cd1400setreg(portp, CCR, ccr);
-	stl_cd1400ccrwait(portp);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Start/stop the Transmitter and/or Receiver.
- */
-
-static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx)
-{
-	unsigned char	sreron, sreroff;
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
-	sreron = 0;
-	sreroff = 0;
-	if (tx == 0)
-		sreroff |= (SRER_TXDATA | SRER_TXEMPTY);
-	else if (tx == 1)
-		sreron |= SRER_TXDATA;
-	else if (tx >= 2)
-		sreron |= SRER_TXEMPTY;
-	if (rx == 0)
-		sreroff |= SRER_RXDATA;
-	else if (rx > 0)
-		sreron |= SRER_RXDATA;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400setreg(portp, SRER,
-		((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron));
-	BRDDISABLE(portp->brdnr);
-	if (tx > 0)
-		set_bit(ASYI_TXBUSY, &portp->istate);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Disable all interrupts from this port.
- */
-
-static void stl_cd1400disableintrs(struct stlport *portp)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400setreg(portp, SRER, 0);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static void stl_cd1400sendbreak(struct stlport *portp, int len)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400setreg(portp, SRER,
-		((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) |
-		SRER_TXEMPTY));
-	BRDDISABLE(portp->brdnr);
-	portp->brklen = len;
-	if (len == 1)
-		portp->stats.txbreaks++;
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Take flow control actions...
- */
-
-static void stl_cd1400flowctrl(struct stlport *portp, int state)
-{
-	struct tty_struct	*tty;
-	unsigned long		flags;
-
-	pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state);
-
-	if (portp == NULL)
-		return;
-	tty = tty_port_tty_get(&portp->port);
-	if (tty == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-
-	if (state) {
-		if (tty->termios->c_iflag & IXOFF) {
-			stl_cd1400ccrwait(portp);
-			stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
-			portp->stats.rxxon++;
-			stl_cd1400ccrwait(portp);
-		}
-/*
- *		Question: should we return RTS to what it was before? It may
- *		have been set by an ioctl... Suppose not, since if you have
- *		hardware flow control set then it is pretty silly to go and
- *		set the RTS line by hand.
- */
-		if (tty->termios->c_cflag & CRTSCTS) {
-			stl_cd1400setreg(portp, MCOR1,
-				(stl_cd1400getreg(portp, MCOR1) |
-				FIFO_RTSTHRESHOLD));
-			stl_cd1400setreg(portp, MSVR2, MSVR2_RTS);
-			portp->stats.rxrtson++;
-		}
-	} else {
-		if (tty->termios->c_iflag & IXOFF) {
-			stl_cd1400ccrwait(portp);
-			stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
-			portp->stats.rxxoff++;
-			stl_cd1400ccrwait(portp);
-		}
-		if (tty->termios->c_cflag & CRTSCTS) {
-			stl_cd1400setreg(portp, MCOR1,
-				(stl_cd1400getreg(portp, MCOR1) & 0xf0));
-			stl_cd1400setreg(portp, MSVR2, 0);
-			portp->stats.rxrtsoff++;
-		}
-	}
-
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- *	Send a flow control character...
- */
-
-static void stl_cd1400sendflow(struct stlport *portp, int state)
-{
-	struct tty_struct	*tty;
-	unsigned long		flags;
-
-	pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state);
-
-	if (portp == NULL)
-		return;
-	tty = tty_port_tty_get(&portp->port);
-	if (tty == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	if (state) {
-		stl_cd1400ccrwait(portp);
-		stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
-		portp->stats.rxxon++;
-		stl_cd1400ccrwait(portp);
-	} else {
-		stl_cd1400ccrwait(portp);
-		stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
-		portp->stats.rxxoff++;
-		stl_cd1400ccrwait(portp);
-	}
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_cd1400flush(struct stlport *portp)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_cd1400flush(portp=%p)\n", portp);
-
-	if (portp == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-	stl_cd1400ccrwait(portp);
-	stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO);
-	stl_cd1400ccrwait(portp);
-	portp->tx.tail = portp->tx.head;
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the current state of data flow on this port. This is only
- *	really interesting when determining if data has fully completed
- *	transmission or not... This is easy for the cd1400, it accurately
- *	maintains the busy port flag.
- */
-
-static int stl_cd1400datastate(struct stlport *portp)
-{
-	pr_debug("stl_cd1400datastate(portp=%p)\n", portp);
-
-	if (portp == NULL)
-		return 0;
-
-	return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for cd1400 EasyIO boards.
- */
-
-static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase)
-{
-	unsigned char	svrtype;
-
-	pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase);
-
-	spin_lock(&brd_lock);
-	outb(SVRR, iobase);
-	svrtype = inb(iobase + EREG_DATA);
-	if (panelp->nrports > 4) {
-		outb((SVRR + 0x80), iobase);
-		svrtype |= inb(iobase + EREG_DATA);
-	}
-
-	if (svrtype & SVRR_RX)
-		stl_cd1400rxisr(panelp, iobase);
-	else if (svrtype & SVRR_TX)
-		stl_cd1400txisr(panelp, iobase);
-	else if (svrtype & SVRR_MDM)
-		stl_cd1400mdmisr(panelp, iobase);
-
-	spin_unlock(&brd_lock);
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for cd1400 panels.
- */
-
-static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase)
-{
-	unsigned char	svrtype;
-
-	pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase);
-
-	outb(SVRR, iobase);
-	svrtype = inb(iobase + EREG_DATA);
-	outb((SVRR + 0x80), iobase);
-	svrtype |= inb(iobase + EREG_DATA);
-	if (svrtype & SVRR_RX)
-		stl_cd1400rxisr(panelp, iobase);
-	else if (svrtype & SVRR_TX)
-		stl_cd1400txisr(panelp, iobase);
-	else if (svrtype & SVRR_MDM)
-		stl_cd1400mdmisr(panelp, iobase);
-}
-
-
-/*****************************************************************************/
-
-/*
- *	Unfortunately we need to handle breaks in the TX data stream, since
- *	this is the only way to generate them on the cd1400.
- */
-
-static int stl_cd1400breakisr(struct stlport *portp, int ioaddr)
-{
-	if (portp->brklen == 1) {
-		outb((COR2 + portp->uartaddr), ioaddr);
-		outb((inb(ioaddr + EREG_DATA) | COR2_ETC),
-			(ioaddr + EREG_DATA));
-		outb((TDR + portp->uartaddr), ioaddr);
-		outb(ETC_CMD, (ioaddr + EREG_DATA));
-		outb(ETC_STARTBREAK, (ioaddr + EREG_DATA));
-		outb((SRER + portp->uartaddr), ioaddr);
-		outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
-			(ioaddr + EREG_DATA));
-		return 1;
-	} else if (portp->brklen > 1) {
-		outb((TDR + portp->uartaddr), ioaddr);
-		outb(ETC_CMD, (ioaddr + EREG_DATA));
-		outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
-		portp->brklen = -1;
-		return 1;
-	} else {
-		outb((COR2 + portp->uartaddr), ioaddr);
-		outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
-			(ioaddr + EREG_DATA));
-		portp->brklen = 0;
-	}
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Transmit interrupt handler. This has gotta be fast!  Handling TX
- *	chars is pretty simple, stuff as many as possible from the TX buffer
- *	into the cd1400 FIFO. Must also handle TX breaks here, since they
- *	are embedded as commands in the data stream. Oh no, had to use a goto!
- *	This could be optimized more, will do when I get time...
- *	In practice it is possible that interrupts are enabled but that the
- *	port has been hung up. Need to handle not having any TX buffer here,
- *	this is done by using the side effect that head and tail will also
- *	be NULL if the buffer has been freed.
- */
-
-static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr)
-{
-	struct stlport	*portp;
-	int		len, stlen;
-	char		*head, *tail;
-	unsigned char	ioack, srer;
-	struct tty_struct *tty;
-
-	pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
-
-	ioack = inb(ioaddr + EREG_TXACK);
-	if (((ioack & panelp->ackmask) != 0) ||
-	    ((ioack & ACK_TYPMASK) != ACK_TYPTX)) {
-		printk("STALLION: bad TX interrupt ack value=%x\n", ioack);
-		return;
-	}
-	portp = panelp->ports[(ioack >> 3)];
-
-/*
- *	Unfortunately we need to handle breaks in the data stream, since
- *	this is the only way to generate them on the cd1400. Do it now if
- *	a break is to be sent.
- */
-	if (portp->brklen != 0)
-		if (stl_cd1400breakisr(portp, ioaddr))
-			goto stl_txalldone;
-
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
-	if ((len == 0) || ((len < STL_TXBUFLOW) &&
-	    (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
-		set_bit(ASYI_TXLOW, &portp->istate);
-		tty = tty_port_tty_get(&portp->port);
-		if (tty) {
-			tty_wakeup(tty);
-			tty_kref_put(tty);
-		}
-	}
-
-	if (len == 0) {
-		outb((SRER + portp->uartaddr), ioaddr);
-		srer = inb(ioaddr + EREG_DATA);
-		if (srer & SRER_TXDATA) {
-			srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY;
-		} else {
-			srer &= ~(SRER_TXDATA | SRER_TXEMPTY);
-			clear_bit(ASYI_TXBUSY, &portp->istate);
-		}
-		outb(srer, (ioaddr + EREG_DATA));
-	} else {
-		len = min(len, CD1400_TXFIFOSIZE);
-		portp->stats.txtotal += len;
-		stlen = min_t(unsigned int, len,
-				(portp->tx.buf + STL_TXBUFSIZE) - tail);
-		outb((TDR + portp->uartaddr), ioaddr);
-		outsb((ioaddr + EREG_DATA), tail, stlen);
-		len -= stlen;
-		tail += stlen;
-		if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
-			tail = portp->tx.buf;
-		if (len > 0) {
-			outsb((ioaddr + EREG_DATA), tail, len);
-			tail += len;
-		}
-		portp->tx.tail = tail;
-	}
-
-stl_txalldone:
-	outb((EOSRR + portp->uartaddr), ioaddr);
-	outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-
-/*
- *	Receive character interrupt handler. Determine if we have good chars
- *	or bad chars and then process appropriately. Good chars are easy
- *	just shove the lot into the RX buffer and set all status byte to 0.
- *	If a bad RX char then process as required. This routine needs to be
- *	fast!  In practice it is possible that we get an interrupt on a port
- *	that is closed. This can happen on hangups - since they completely
- *	shutdown a port not in user context. Need to handle this case.
- */
-
-static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr)
-{
-	struct stlport		*portp;
-	struct tty_struct	*tty;
-	unsigned int		ioack, len, buflen;
-	unsigned char		status;
-	char			ch;
-
-	pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
-
-	ioack = inb(ioaddr + EREG_RXACK);
-	if ((ioack & panelp->ackmask) != 0) {
-		printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
-		return;
-	}
-	portp = panelp->ports[(ioack >> 3)];
-	tty = tty_port_tty_get(&portp->port);
-
-	if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
-		outb((RDCR + portp->uartaddr), ioaddr);
-		len = inb(ioaddr + EREG_DATA);
-		if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
-			len = min_t(unsigned int, len, sizeof(stl_unwanted));
-			outb((RDSR + portp->uartaddr), ioaddr);
-			insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
-			portp->stats.rxlost += len;
-			portp->stats.rxtotal += len;
-		} else {
-			len = min(len, buflen);
-			if (len > 0) {
-				unsigned char *ptr;
-				outb((RDSR + portp->uartaddr), ioaddr);
-				tty_prepare_flip_string(tty, &ptr, len);
-				insb((ioaddr + EREG_DATA), ptr, len);
-				tty_schedule_flip(tty);
-				portp->stats.rxtotal += len;
-			}
-		}
-	} else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) {
-		outb((RDSR + portp->uartaddr), ioaddr);
-		status = inb(ioaddr + EREG_DATA);
-		ch = inb(ioaddr + EREG_DATA);
-		if (status & ST_PARITY)
-			portp->stats.rxparity++;
-		if (status & ST_FRAMING)
-			portp->stats.rxframing++;
-		if (status & ST_OVERRUN)
-			portp->stats.rxoverrun++;
-		if (status & ST_BREAK)
-			portp->stats.rxbreaks++;
-		if (status & ST_SCHARMASK) {
-			if ((status & ST_SCHARMASK) == ST_SCHAR1)
-				portp->stats.txxon++;
-			if ((status & ST_SCHARMASK) == ST_SCHAR2)
-				portp->stats.txxoff++;
-			goto stl_rxalldone;
-		}
-		if (tty != NULL && (portp->rxignoremsk & status) == 0) {
-			if (portp->rxmarkmsk & status) {
-				if (status & ST_BREAK) {
-					status = TTY_BREAK;
-					if (portp->port.flags & ASYNC_SAK) {
-						do_SAK(tty);
-						BRDENABLE(portp->brdnr, portp->pagenr);
-					}
-				} else if (status & ST_PARITY)
-					status = TTY_PARITY;
-				else if (status & ST_FRAMING)
-					status = TTY_FRAME;
-				else if(status & ST_OVERRUN)
-					status = TTY_OVERRUN;
-				else
-					status = 0;
-			} else
-				status = 0;
-			tty_insert_flip_char(tty, ch, status);
-			tty_schedule_flip(tty);
-		}
-	} else {
-		printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
-		tty_kref_put(tty);
-		return;
-	}
-
-stl_rxalldone:
-	tty_kref_put(tty);
-	outb((EOSRR + portp->uartaddr), ioaddr);
-	outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-
-/*
- *	Modem interrupt handler. The is called when the modem signal line
- *	(DCD) has changed state. Leave most of the work to the off-level
- *	processing routine.
- */
-
-static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr)
-{
-	struct stlport	*portp;
-	unsigned int	ioack;
-	unsigned char	misr;
-
-	pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp);
-
-	ioack = inb(ioaddr + EREG_MDACK);
-	if (((ioack & panelp->ackmask) != 0) ||
-	    ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) {
-		printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack);
-		return;
-	}
-	portp = panelp->ports[(ioack >> 3)];
-
-	outb((MISR + portp->uartaddr), ioaddr);
-	misr = inb(ioaddr + EREG_DATA);
-	if (misr & MISR_DCD) {
-		stl_cd_change(portp);
-		portp->stats.modem++;
-	}
-
-	outb((EOSRR + portp->uartaddr), ioaddr);
-	outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-/*                      SC26198 HARDWARE FUNCTIONS                           */
-/*****************************************************************************/
-
-/*
- *	These functions get/set/update the registers of the sc26198 UARTs.
- *	Access to the sc26198 registers is via an address/data io port pair.
- *	(Maybe should make this inline...)
- */
-
-static int stl_sc26198getreg(struct stlport *portp, int regnr)
-{
-	outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
-	return inb(portp->ioaddr + XP_DATA);
-}
-
-static void stl_sc26198setreg(struct stlport *portp, int regnr, int value)
-{
-	outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
-	outb(value, (portp->ioaddr + XP_DATA));
-}
-
-static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value)
-{
-	outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
-	if (inb(portp->ioaddr + XP_DATA) != value) {
-		outb(value, (portp->ioaddr + XP_DATA));
-		return 1;
-	}
-	return 0;
-}
-
-/*****************************************************************************/
-
-/*
- *	Functions to get and set the sc26198 global registers.
- */
-
-static int stl_sc26198getglobreg(struct stlport *portp, int regnr)
-{
-	outb(regnr, (portp->ioaddr + XP_ADDR));
-	return inb(portp->ioaddr + XP_DATA);
-}
-
-#if 0
-static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value)
-{
-	outb(regnr, (portp->ioaddr + XP_ADDR));
-	outb(value, (portp->ioaddr + XP_DATA));
-}
-#endif
-
-/*****************************************************************************/
-
-/*
- *	Inbitialize the UARTs in a panel. We don't care what sort of board
- *	these ports are on - since the port io registers are almost
- *	identical when dealing with ports.
- */
-
-static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
-{
-	int	chipmask, i;
-	int	nrchips, ioaddr;
-
-	pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
-
-	BRDENABLE(panelp->brdnr, panelp->pagenr);
-
-/*
- *	Check that each chip is present and started up OK.
- */
-	chipmask = 0;
-	nrchips = (panelp->nrports + 4) / SC26198_PORTS;
-	if (brdp->brdtype == BRD_ECHPCI)
-		outb(panelp->pagenr, brdp->ioctrl);
-
-	for (i = 0; i < nrchips; i++) {
-		ioaddr = panelp->iobase + (i * 4); 
-		outb(SCCR, (ioaddr + XP_ADDR));
-		outb(CR_RESETALL, (ioaddr + XP_DATA));
-		outb(TSTR, (ioaddr + XP_ADDR));
-		if (inb(ioaddr + XP_DATA) != 0) {
-			printk("STALLION: sc26198 not responding, "
-				"brd=%d panel=%d chip=%d\n",
-				panelp->brdnr, panelp->panelnr, i);
-			continue;
-		}
-		chipmask |= (0x1 << i);
-		outb(GCCR, (ioaddr + XP_ADDR));
-		outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA));
-		outb(WDTRCR, (ioaddr + XP_ADDR));
-		outb(0xff, (ioaddr + XP_DATA));
-	}
-
-	BRDDISABLE(panelp->brdnr);
-	return chipmask;
-}
-
-/*****************************************************************************/
-
-/*
- *	Initialize hardware specific port registers.
- */
-
-static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
-{
-	pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
-			panelp, portp);
-
-	if ((brdp == NULL) || (panelp == NULL) ||
-	    (portp == NULL))
-		return;
-
-	portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4);
-	portp->uartaddr = (portp->portnr & 0x07) << 4;
-	portp->pagenr = panelp->pagenr;
-	portp->hwid = 0x1;
-
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS);
-	BRDDISABLE(portp->brdnr);
-}
-
-/*****************************************************************************/
-
-/*
- *	Set up the sc26198 registers for a port based on the termios port
- *	settings.
- */
-
-static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp)
-{
-	struct stlbrd	*brdp;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned char	mr0, mr1, mr2, clk;
-	unsigned char	imron, imroff, iopr, ipr;
-
-	mr0 = 0;
-	mr1 = 0;
-	mr2 = 0;
-	clk = 0;
-	iopr = 0;
-	imron = 0;
-	imroff = 0;
-
-	brdp = stl_brds[portp->brdnr];
-	if (brdp == NULL)
-		return;
-
-/*
- *	Set up the RX char ignore mask with those RX error types we
- *	can ignore.
- */
-	portp->rxignoremsk = 0;
-	if (tiosp->c_iflag & IGNPAR)
-		portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING |
-			SR_RXOVERRUN);
-	if (tiosp->c_iflag & IGNBRK)
-		portp->rxignoremsk |= SR_RXBREAK;
-
-	portp->rxmarkmsk = SR_RXOVERRUN;
-	if (tiosp->c_iflag & (INPCK | PARMRK))
-		portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING);
-	if (tiosp->c_iflag & BRKINT)
-		portp->rxmarkmsk |= SR_RXBREAK;
-
-/*
- *	Go through the char size, parity and stop bits and set all the
- *	option register appropriately.
- */
-	switch (tiosp->c_cflag & CSIZE) {
-	case CS5:
-		mr1 |= MR1_CS5;
-		break;
-	case CS6:
-		mr1 |= MR1_CS6;
-		break;
-	case CS7:
-		mr1 |= MR1_CS7;
-		break;
-	default:
-		mr1 |= MR1_CS8;
-		break;
-	}
-
-	if (tiosp->c_cflag & CSTOPB)
-		mr2 |= MR2_STOP2;
-	else
-		mr2 |= MR2_STOP1;
-
-	if (tiosp->c_cflag & PARENB) {
-		if (tiosp->c_cflag & PARODD)
-			mr1 |= (MR1_PARENB | MR1_PARODD);
-		else
-			mr1 |= (MR1_PARENB | MR1_PAREVEN);
-	} else
-		mr1 |= MR1_PARNONE;
-
-	mr1 |= MR1_ERRBLOCK;
-
-/*
- *	Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
- *	space for hardware flow control and the like. This should be set to
- *	VMIN.
- */
-	mr2 |= MR2_RXFIFOHALF;
-
-/*
- *	Calculate the baud rate timers. For now we will just assume that
- *	the input and output baud are the same. The sc26198 has a fixed
- *	baud rate table, so only discrete baud rates possible.
- */
-	baudrate = tiosp->c_cflag & CBAUD;
-	if (baudrate & CBAUDEX) {
-		baudrate &= ~CBAUDEX;
-		if ((baudrate < 1) || (baudrate > 4))
-			tiosp->c_cflag &= ~CBAUDEX;
-		else
-			baudrate += 15;
-	}
-	baudrate = stl_baudrates[baudrate];
-	if ((tiosp->c_cflag & CBAUD) == B38400) {
-		if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			baudrate = 57600;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			baudrate = 115200;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			baudrate = 230400;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			baudrate = 460800;
-		else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
-			baudrate = (portp->baud_base / portp->custom_divisor);
-	}
-	if (baudrate > STL_SC26198MAXBAUD)
-		baudrate = STL_SC26198MAXBAUD;
-
-	if (baudrate > 0)
-		for (clk = 0; clk < SC26198_NRBAUDS; clk++)
-			if (baudrate <= sc26198_baudtable[clk])
-				break;
-
-/*
- *	Check what form of modem signaling is required and set it up.
- */
-	if (tiosp->c_cflag & CLOCAL) {
-		portp->port.flags &= ~ASYNC_CHECK_CD;
-	} else {
-		iopr |= IOPR_DCDCOS;
-		imron |= IR_IOPORT;
-		portp->port.flags |= ASYNC_CHECK_CD;
-	}
-
-/*
- *	Setup sc26198 enhanced modes if we can. In particular we want to
- *	handle as much of the flow control as possible automatically. As
- *	well as saving a few CPU cycles it will also greatly improve flow
- *	control reliability.
- */
-	if (tiosp->c_iflag & IXON) {
-		mr0 |= MR0_SWFTX | MR0_SWFT;
-		imron |= IR_XONXOFF;
-	} else
-		imroff |= IR_XONXOFF;
-
-	if (tiosp->c_iflag & IXOFF)
-		mr0 |= MR0_SWFRX;
-
-	if (tiosp->c_cflag & CRTSCTS) {
-		mr2 |= MR2_AUTOCTS;
-		mr1 |= MR1_AUTORTS;
-	}
-
-/*
- *	All sc26198 register values calculated so go through and set
- *	them all up.
- */
-
-	pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
-		portp->portnr, portp->panelnr, portp->brdnr);
-	pr_debug("    mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
-	pr_debug("    iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
-	pr_debug("    schr1=%x schr2=%x schr3=%x schr4=%x\n",
-		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
-		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, IMR, 0);
-	stl_sc26198updatereg(portp, MR0, mr0);
-	stl_sc26198updatereg(portp, MR1, mr1);
-	stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK);
-	stl_sc26198updatereg(portp, MR2, mr2);
-	stl_sc26198updatereg(portp, IOPIOR,
-		((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr));
-
-	if (baudrate > 0) {
-		stl_sc26198setreg(portp, TXCSR, clk);
-		stl_sc26198setreg(portp, RXCSR, clk);
-	}
-
-	stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]);
-	stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]);
-
-	ipr = stl_sc26198getreg(portp, IPR);
-	if (ipr & IPR_DCD)
-		portp->sigs &= ~TIOCM_CD;
-	else
-		portp->sigs |= TIOCM_CD;
-
-	portp->imr = (portp->imr & ~imroff) | imron;
-	stl_sc26198setreg(portp, IMR, portp->imr);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Set the state of the DTR and RTS signals.
- */
-
-static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts)
-{
-	unsigned char	iopioron, iopioroff;
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp,
-			dtr, rts);
-
-	iopioron = 0;
-	iopioroff = 0;
-	if (dtr == 0)
-		iopioroff |= IPR_DTR;
-	else if (dtr > 0)
-		iopioron |= IPR_DTR;
-	if (rts == 0)
-		iopioroff |= IPR_RTS;
-	else if (rts > 0)
-		iopioron |= IPR_RTS;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, IOPIOR,
-		((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the state of the signals.
- */
-
-static int stl_sc26198getsignals(struct stlport *portp)
-{
-	unsigned char	ipr;
-	unsigned long	flags;
-	int		sigs;
-
-	pr_debug("stl_sc26198getsignals(portp=%p)\n", portp);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	ipr = stl_sc26198getreg(portp, IPR);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	sigs = 0;
-	sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
-	sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS;
-	sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
-	sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
-	sigs |= TIOCM_DSR;
-	return sigs;
-}
-
-/*****************************************************************************/
-
-/*
- *	Enable/Disable the Transmitter and/or Receiver.
- */
-
-static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx)
-{
-	unsigned char	ccr;
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx);
-
-	ccr = portp->crenable;
-	if (tx == 0)
-		ccr &= ~CR_TXENABLE;
-	else if (tx > 0)
-		ccr |= CR_TXENABLE;
-	if (rx == 0)
-		ccr &= ~CR_RXENABLE;
-	else if (rx > 0)
-		ccr |= CR_RXENABLE;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, SCCR, ccr);
-	BRDDISABLE(portp->brdnr);
-	portp->crenable = ccr;
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Start/stop the Transmitter and/or Receiver.
- */
-
-static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx)
-{
-	unsigned char	imr;
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
-	imr = portp->imr;
-	if (tx == 0)
-		imr &= ~IR_TXRDY;
-	else if (tx == 1)
-		imr |= IR_TXRDY;
-	if (rx == 0)
-		imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG);
-	else if (rx > 0)
-		imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, IMR, imr);
-	BRDDISABLE(portp->brdnr);
-	portp->imr = imr;
-	if (tx > 0)
-		set_bit(ASYI_TXBUSY, &portp->istate);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Disable all interrupts from this port.
- */
-
-static void stl_sc26198disableintrs(struct stlport *portp)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	portp->imr = 0;
-	stl_sc26198setreg(portp, IMR, 0);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static void stl_sc26198sendbreak(struct stlport *portp, int len)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len);
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	if (len == 1) {
-		stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
-		portp->stats.txbreaks++;
-	} else
-		stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
-
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Take flow control actions...
- */
-
-static void stl_sc26198flowctrl(struct stlport *portp, int state)
-{
-	struct tty_struct	*tty;
-	unsigned long		flags;
-	unsigned char		mr0;
-
-	pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state);
-
-	if (portp == NULL)
-		return;
-	tty = tty_port_tty_get(&portp->port);
-	if (tty == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-
-	if (state) {
-		if (tty->termios->c_iflag & IXOFF) {
-			mr0 = stl_sc26198getreg(portp, MR0);
-			stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
-			stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
-			mr0 |= MR0_SWFRX;
-			portp->stats.rxxon++;
-			stl_sc26198wait(portp);
-			stl_sc26198setreg(portp, MR0, mr0);
-		}
-/*
- *		Question: should we return RTS to what it was before? It may
- *		have been set by an ioctl... Suppose not, since if you have
- *		hardware flow control set then it is pretty silly to go and
- *		set the RTS line by hand.
- */
-		if (tty->termios->c_cflag & CRTSCTS) {
-			stl_sc26198setreg(portp, MR1,
-				(stl_sc26198getreg(portp, MR1) | MR1_AUTORTS));
-			stl_sc26198setreg(portp, IOPIOR,
-				(stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS));
-			portp->stats.rxrtson++;
-		}
-	} else {
-		if (tty->termios->c_iflag & IXOFF) {
-			mr0 = stl_sc26198getreg(portp, MR0);
-			stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
-			stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
-			mr0 &= ~MR0_SWFRX;
-			portp->stats.rxxoff++;
-			stl_sc26198wait(portp);
-			stl_sc26198setreg(portp, MR0, mr0);
-		}
-		if (tty->termios->c_cflag & CRTSCTS) {
-			stl_sc26198setreg(portp, MR1,
-				(stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS));
-			stl_sc26198setreg(portp, IOPIOR,
-				(stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS));
-			portp->stats.rxrtsoff++;
-		}
-	}
-
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- *	Send a flow control character.
- */
-
-static void stl_sc26198sendflow(struct stlport *portp, int state)
-{
-	struct tty_struct	*tty;
-	unsigned long		flags;
-	unsigned char		mr0;
-
-	pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state);
-
-	if (portp == NULL)
-		return;
-	tty = tty_port_tty_get(&portp->port);
-	if (tty == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	if (state) {
-		mr0 = stl_sc26198getreg(portp, MR0);
-		stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
-		stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
-		mr0 |= MR0_SWFRX;
-		portp->stats.rxxon++;
-		stl_sc26198wait(portp);
-		stl_sc26198setreg(portp, MR0, mr0);
-	} else {
-		mr0 = stl_sc26198getreg(portp, MR0);
-		stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
-		stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
-		mr0 &= ~MR0_SWFRX;
-		portp->stats.rxxoff++;
-		stl_sc26198wait(portp);
-		stl_sc26198setreg(portp, MR0, mr0);
-	}
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_sc26198flush(struct stlport *portp)
-{
-	unsigned long	flags;
-
-	pr_debug("stl_sc26198flush(portp=%p)\n", portp);
-
-	if (portp == NULL)
-		return;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	stl_sc26198setreg(portp, SCCR, CR_TXRESET);
-	stl_sc26198setreg(portp, SCCR, portp->crenable);
-	BRDDISABLE(portp->brdnr);
-	portp->tx.tail = portp->tx.head;
-	spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- *	Return the current state of data flow on this port. This is only
- *	really interesting when determining if data has fully completed
- *	transmission or not... The sc26198 interrupt scheme cannot
- *	determine when all data has actually drained, so we need to
- *	check the port statusy register to be sure.
- */
-
-static int stl_sc26198datastate(struct stlport *portp)
-{
-	unsigned long	flags;
-	unsigned char	sr;
-
-	pr_debug("stl_sc26198datastate(portp=%p)\n", portp);
-
-	if (portp == NULL)
-		return 0;
-	if (test_bit(ASYI_TXBUSY, &portp->istate))
-		return 1;
-
-	spin_lock_irqsave(&brd_lock, flags);
-	BRDENABLE(portp->brdnr, portp->pagenr);
-	sr = stl_sc26198getreg(portp, SR);
-	BRDDISABLE(portp->brdnr);
-	spin_unlock_irqrestore(&brd_lock, flags);
-
-	return (sr & SR_TXEMPTY) ? 0 : 1;
-}
-
-/*****************************************************************************/
-
-/*
- *	Delay for a small amount of time, to give the sc26198 a chance
- *	to process a command...
- */
-
-static void stl_sc26198wait(struct stlport *portp)
-{
-	int	i;
-
-	pr_debug("stl_sc26198wait(portp=%p)\n", portp);
-
-	if (portp == NULL)
-		return;
-
-	for (i = 0; i < 20; i++)
-		stl_sc26198getglobreg(portp, TSTR);
-}
-
-/*****************************************************************************/
-
-/*
- *	If we are TX flow controlled and in IXANY mode then we may
- *	need to unflow control here. We gotta do this because of the
- *	automatic flow control modes of the sc26198.
- */
-
-static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty)
-{
-	unsigned char	mr0;
-
-	mr0 = stl_sc26198getreg(portp, MR0);
-	stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
-	stl_sc26198setreg(portp, SCCR, CR_HOSTXON);
-	stl_sc26198wait(portp);
-	stl_sc26198setreg(portp, MR0, mr0);
-	clear_bit(ASYI_TXFLOWED, &portp->istate);
-}
-
-/*****************************************************************************/
-
-/*
- *	Interrupt service routine for sc26198 panels.
- */
-
-static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase)
-{
-	struct stlport	*portp;
-	unsigned int	iack;
-
-	spin_lock(&brd_lock);
-
-/* 
- *	Work around bug in sc26198 chip... Cannot have A6 address
- *	line of UART high, else iack will be returned as 0.
- */
-	outb(0, (iobase + 1));
-
-	iack = inb(iobase + XP_IACK);
-	portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)];
-
-	if (iack & IVR_RXDATA)
-		stl_sc26198rxisr(portp, iack);
-	else if (iack & IVR_TXDATA)
-		stl_sc26198txisr(portp);
-	else
-		stl_sc26198otherisr(portp, iack);
-
-	spin_unlock(&brd_lock);
-}
-
-/*****************************************************************************/
-
-/*
- *	Transmit interrupt handler. This has gotta be fast!  Handling TX
- *	chars is pretty simple, stuff as many as possible from the TX buffer
- *	into the sc26198 FIFO.
- *	In practice it is possible that interrupts are enabled but that the
- *	port has been hung up. Need to handle not having any TX buffer here,
- *	this is done by using the side effect that head and tail will also
- *	be NULL if the buffer has been freed.
- */
-
-static void stl_sc26198txisr(struct stlport *portp)
-{
-	struct tty_struct *tty;
-	unsigned int	ioaddr;
-	unsigned char	mr0;
-	int		len, stlen;
-	char		*head, *tail;
-
-	pr_debug("stl_sc26198txisr(portp=%p)\n", portp);
-
-	ioaddr = portp->ioaddr;
-	head = portp->tx.head;
-	tail = portp->tx.tail;
-	len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
-	if ((len == 0) || ((len < STL_TXBUFLOW) &&
-	    (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
-		set_bit(ASYI_TXLOW, &portp->istate);
-		tty = tty_port_tty_get(&portp->port);
-		if (tty) {
-			tty_wakeup(tty);
-			tty_kref_put(tty);
-		}
-	}
-
-	if (len == 0) {
-		outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR));
-		mr0 = inb(ioaddr + XP_DATA);
-		if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) {
-			portp->imr &= ~IR_TXRDY;
-			outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR));
-			outb(portp->imr, (ioaddr + XP_DATA));
-			clear_bit(ASYI_TXBUSY, &portp->istate);
-		} else {
-			mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY);
-			outb(mr0, (ioaddr + XP_DATA));
-		}
-	} else {
-		len = min(len, SC26198_TXFIFOSIZE);
-		portp->stats.txtotal += len;
-		stlen = min_t(unsigned int, len,
-				(portp->tx.buf + STL_TXBUFSIZE) - tail);
-		outb(GTXFIFO, (ioaddr + XP_ADDR));
-		outsb((ioaddr + XP_DATA), tail, stlen);
-		len -= stlen;
-		tail += stlen;
-		if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
-			tail = portp->tx.buf;
-		if (len > 0) {
-			outsb((ioaddr + XP_DATA), tail, len);
-			tail += len;
-		}
-		portp->tx.tail = tail;
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	Receive character interrupt handler. Determine if we have good chars
- *	or bad chars and then process appropriately. Good chars are easy
- *	just shove the lot into the RX buffer and set all status byte to 0.
- *	If a bad RX char then process as required. This routine needs to be
- *	fast!  In practice it is possible that we get an interrupt on a port
- *	that is closed. This can happen on hangups - since they completely
- *	shutdown a port not in user context. Need to handle this case.
- */
-
-static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack)
-{
-	struct tty_struct	*tty;
-	unsigned int		len, buflen, ioaddr;
-
-	pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
-
-	tty = tty_port_tty_get(&portp->port);
-	ioaddr = portp->ioaddr;
-	outb(GIBCR, (ioaddr + XP_ADDR));
-	len = inb(ioaddr + XP_DATA) + 1;
-
-	if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
-		if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
-			len = min_t(unsigned int, len, sizeof(stl_unwanted));
-			outb(GRXFIFO, (ioaddr + XP_ADDR));
-			insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
-			portp->stats.rxlost += len;
-			portp->stats.rxtotal += len;
-		} else {
-			len = min(len, buflen);
-			if (len > 0) {
-				unsigned char *ptr;
-				outb(GRXFIFO, (ioaddr + XP_ADDR));
-				tty_prepare_flip_string(tty, &ptr, len);
-				insb((ioaddr + XP_DATA), ptr, len);
-				tty_schedule_flip(tty);
-				portp->stats.rxtotal += len;
-			}
-		}
-	} else {
-		stl_sc26198rxbadchars(portp);
-	}
-
-/*
- *	If we are TX flow controlled and in IXANY mode then we may need
- *	to unflow control here. We gotta do this because of the automatic
- *	flow control modes of the sc26198.
- */
-	if (test_bit(ASYI_TXFLOWED, &portp->istate)) {
-		if ((tty != NULL) &&
-		    (tty->termios != NULL) &&
-		    (tty->termios->c_iflag & IXANY)) {
-			stl_sc26198txunflow(portp, tty);
-		}
-	}
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- *	Process an RX bad character.
- */
-
-static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch)
-{
-	struct tty_struct	*tty;
-	unsigned int		ioaddr;
-
-	tty = tty_port_tty_get(&portp->port);
-	ioaddr = portp->ioaddr;
-
-	if (status & SR_RXPARITY)
-		portp->stats.rxparity++;
-	if (status & SR_RXFRAMING)
-		portp->stats.rxframing++;
-	if (status & SR_RXOVERRUN)
-		portp->stats.rxoverrun++;
-	if (status & SR_RXBREAK)
-		portp->stats.rxbreaks++;
-
-	if ((tty != NULL) &&
-	    ((portp->rxignoremsk & status) == 0)) {
-		if (portp->rxmarkmsk & status) {
-			if (status & SR_RXBREAK) {
-				status = TTY_BREAK;
-				if (portp->port.flags & ASYNC_SAK) {
-					do_SAK(tty);
-					BRDENABLE(portp->brdnr, portp->pagenr);
-				}
-			} else if (status & SR_RXPARITY)
-				status = TTY_PARITY;
-			else if (status & SR_RXFRAMING)
-				status = TTY_FRAME;
-			else if(status & SR_RXOVERRUN)
-				status = TTY_OVERRUN;
-			else
-				status = 0;
-		} else
-			status = 0;
-
-		tty_insert_flip_char(tty, ch, status);
-		tty_schedule_flip(tty);
-
-		if (status == 0)
-			portp->stats.rxtotal++;
-	}
-	tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- *	Process all characters in the RX FIFO of the UART. Check all char
- *	status bytes as well, and process as required. We need to check
- *	all bytes in the FIFO, in case some more enter the FIFO while we
- *	are here. To get the exact character error type we need to switch
- *	into CHAR error mode (that is why we need to make sure we empty
- *	the FIFO).
- */
-
-static void stl_sc26198rxbadchars(struct stlport *portp)
-{
-	unsigned char	status, mr1;
-	char		ch;
-
-/*
- *	To get the precise error type for each character we must switch
- *	back into CHAR error mode.
- */
-	mr1 = stl_sc26198getreg(portp, MR1);
-	stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK));
-
-	while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) {
-		stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR);
-		ch = stl_sc26198getreg(portp, RXFIFO);
-		stl_sc26198rxbadch(portp, status, ch);
-	}
-
-/*
- *	To get correct interrupt class we must switch back into BLOCK
- *	error mode.
- */
-	stl_sc26198setreg(portp, MR1, mr1);
-}
-
-/*****************************************************************************/
-
-/*
- *	Other interrupt handler. This includes modem signals, flow
- *	control actions, etc. Most stuff is left to off-level interrupt
- *	processing time.
- */
-
-static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack)
-{
-	unsigned char	cir, ipr, xisr;
-
-	pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack);
-
-	cir = stl_sc26198getglobreg(portp, CIR);
-
-	switch (cir & CIR_SUBTYPEMASK) {
-	case CIR_SUBCOS:
-		ipr = stl_sc26198getreg(portp, IPR);
-		if (ipr & IPR_DCDCHANGE) {
-			stl_cd_change(portp);
-			portp->stats.modem++;
-		}
-		break;
-	case CIR_SUBXONXOFF:
-		xisr = stl_sc26198getreg(portp, XISR);
-		if (xisr & XISR_RXXONGOT) {
-			set_bit(ASYI_TXFLOWED, &portp->istate);
-			portp->stats.txxoff++;
-		}
-		if (xisr & XISR_RXXOFFGOT) {
-			clear_bit(ASYI_TXFLOWED, &portp->istate);
-			portp->stats.txxon++;
-		}
-		break;
-	case CIR_SUBBREAK:
-		stl_sc26198setreg(portp, SCCR, CR_BREAKRESET);
-		stl_sc26198rxbadchars(portp);
-		break;
-	default:
-		break;
-	}
-}
-
-static void stl_free_isabrds(void)
-{
-	struct stlbrd *brdp;
-	unsigned int i;
-
-	for (i = 0; i < stl_nrbrds; i++) {
-		if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
-			continue;
-
-		free_irq(brdp->irq, brdp);
-
-		stl_cleanup_panels(brdp);
-
-		release_region(brdp->ioaddr1, brdp->iosize1);
-		if (brdp->iosize2 > 0)
-			release_region(brdp->ioaddr2, brdp->iosize2);
-
-		kfree(brdp);
-		stl_brds[i] = NULL;
-	}
-}
-
-/*
- *	Loadable module initialization stuff.
- */
-static int __init stallion_module_init(void)
-{
-	struct stlbrd	*brdp;
-	struct stlconf	conf;
-	unsigned int i, j;
-	int retval;
-
-	printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
-
-	spin_lock_init(&stallion_lock);
-	spin_lock_init(&brd_lock);
-
-	stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
-	if (!stl_serial) {
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	stl_serial->owner = THIS_MODULE;
-	stl_serial->driver_name = stl_drvname;
-	stl_serial->name = "ttyE";
-	stl_serial->major = STL_SERIALMAJOR;
-	stl_serial->minor_start = 0;
-	stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
-	stl_serial->subtype = SERIAL_TYPE_NORMAL;
-	stl_serial->init_termios = stl_deftermios;
-	stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(stl_serial, &stl_ops);
-
-	retval = tty_register_driver(stl_serial);
-	if (retval) {
-		printk("STALLION: failed to register serial driver\n");
-		goto err_frtty;
-	}
-
-/*
- *	Find any dynamically supported boards. That is via module load
- *	line options.
- */
-	for (i = stl_nrbrds; i < stl_nargs; i++) {
-		memset(&conf, 0, sizeof(conf));
-		if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
-			continue;
-		if ((brdp = stl_allocbrd()) == NULL)
-			continue;
-		brdp->brdnr = i;
-		brdp->brdtype = conf.brdtype;
-		brdp->ioaddr1 = conf.ioaddr1;
-		brdp->ioaddr2 = conf.ioaddr2;
-		brdp->irq = conf.irq;
-		brdp->irqtype = conf.irqtype;
-		stl_brds[brdp->brdnr] = brdp;
-		if (stl_brdinit(brdp)) {
-			stl_brds[brdp->brdnr] = NULL;
-			kfree(brdp);
-		} else {
-			for (j = 0; j < brdp->nrports; j++)
-				tty_register_device(stl_serial,
-					brdp->brdnr * STL_MAXPORTS + j, NULL);
-			stl_nrbrds = i + 1;
-		}
-	}
-
-	/* this has to be _after_ isa finding because of locking */
-	retval = pci_register_driver(&stl_pcidriver);
-	if (retval && stl_nrbrds == 0) {
-		printk(KERN_ERR "STALLION: can't register pci driver\n");
-		goto err_unrtty;
-	}
-
-/*
- *	Set up a character driver for per board stuff. This is mainly used
- *	to do stats ioctls on the ports.
- */
-	if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
-		printk("STALLION: failed to register serial board device\n");
-
-	stallion_class = class_create(THIS_MODULE, "staliomem");
-	if (IS_ERR(stallion_class))
-		printk("STALLION: failed to create class\n");
-	for (i = 0; i < 4; i++)
-		device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
-			      NULL, "staliomem%d", i);
-
-	return 0;
-err_unrtty:
-	tty_unregister_driver(stl_serial);
-err_frtty:
-	put_tty_driver(stl_serial);
-err:
-	return retval;
-}
-
-static void __exit stallion_module_exit(void)
-{
-	struct stlbrd *brdp;
-	unsigned int i, j;
-
-	pr_debug("cleanup_module()\n");
-
-	printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
-		stl_drvversion);
-
-/*
- *	Free up all allocated resources used by the ports. This includes
- *	memory and interrupts. As part of this process we will also do
- *	a hangup on every open port - to try to flush out any processes
- *	hanging onto ports.
- */
-	for (i = 0; i < stl_nrbrds; i++) {
-		if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
-			continue;
-		for (j = 0; j < brdp->nrports; j++)
-			tty_unregister_device(stl_serial,
-				brdp->brdnr * STL_MAXPORTS + j);
-	}
-
-	for (i = 0; i < 4; i++)
-		device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
-	unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
-	class_destroy(stallion_class);
-
-	pci_unregister_driver(&stl_pcidriver);
-
-	stl_free_isabrds();
-
-	tty_unregister_driver(stl_serial);
-	put_tty_driver(stl_serial);
-}
-
-module_init(stallion_module_init);
-module_exit(stallion_module_exit);
-
-MODULE_AUTHOR("Greg Ungerer");
-MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
-MODULE_LICENSE("GPL");