[PATCH] tpm: Support new National TPMs

This patch is work to support new National TPMs that problems were reported
with on Thinkpad T43 and Thinkcentre S51.  Thanks to Jens and Gang for
their debugging work on these issues.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 38 insertions, 55 deletions

diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 1a45e7d..b412734 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -23,7 +23,6 @@
 
 /* National definitions */
 enum tpm_nsc_addr{
-	TPM_NSC_BASE = 0x360,
 	TPM_NSC_IRQ = 0x07,
 	TPM_NSC_BASE0_HI = 0x60,
 	TPM_NSC_BASE0_LO = 0x61,
@@ -56,6 +55,7 @@ enum tpm_nsc_status {
 	NSC_STATUS_RDY = 0x10,	/* ready to receive command */
 	NSC_STATUS_IBR = 0x20	/* ready to receive data */
 };
+
 /* command bits */
 enum tpm_nsc_cmd_mode {
 	NSC_COMMAND_NORMAL = 0x01,	/* normal mode */
@@ -150,7 +150,8 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		*p = inb(chip->vendor->base + NSC_DATA);
 	}
 
-	if ((data & NSC_STATUS_F0) == 0) {
+	if ((data & NSC_STATUS_F0) == 0 &&
+	(wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
 		dev_err(&chip->pci_dev->dev, "F0 not set\n");
 		return -EIO;
 	}
@@ -259,85 +260,64 @@ static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
 {
 	int rc = 0;
 	int lo, hi;
+	int nscAddrBase = TPM_ADDR;
 
-	hi = tpm_read_index(TPM_NSC_BASE0_HI);
-	lo = tpm_read_index(TPM_NSC_BASE0_LO);
-
-	tpm_nsc.base = (hi<<8) | lo;
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
+	/* select PM channel 1 */
+	tpm_write_index(nscAddrBase,NSC_LDN_INDEX, 0x12);
+
 	/* verify that it is a National part (SID) */
-	if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
-		rc = -ENODEV;
-		goto out_err;
+	if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
+		nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
+			(tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
+		if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) {
+			rc = -ENODEV;
+			goto out_err;
+		}
 	}
 
+	hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
+	lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
+	tpm_nsc.base = (hi<<8) | lo;
+
 	dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
 	dev_dbg(&pci_dev->dev,
 		"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
-		tpm_read_index(0x07), tpm_read_index(0x20),
-		tpm_read_index(0x27));
+		tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
+		tpm_read_index(nscAddrBase,0x27));
 	dev_dbg(&pci_dev->dev,
 		"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
-		tpm_read_index(0x21), tpm_read_index(0x25),
-		tpm_read_index(0x26), tpm_read_index(0x28));
+		tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
+		tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
 	dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
-		(tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
+		(tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
 	dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
-		(tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
+		(tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
 	dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
-		tpm_read_index(0x70));
+		tpm_read_index(nscAddrBase,0x70));
 	dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
-		tpm_read_index(0x71));
+		tpm_read_index(nscAddrBase,0x71));
 	dev_dbg(&pci_dev->dev,
 		"NSC DMA channel select0 0x%x, select1 0x%x\n",
-		tpm_read_index(0x74), tpm_read_index(0x75));
+		tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
 	dev_dbg(&pci_dev->dev,
 		"NSC Config "
 		"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-		tpm_read_index(0xF0), tpm_read_index(0xF1),
-		tpm_read_index(0xF2), tpm_read_index(0xF3),
-		tpm_read_index(0xF4), tpm_read_index(0xF5),
-		tpm_read_index(0xF6), tpm_read_index(0xF7),
-		tpm_read_index(0xF8), tpm_read_index(0xF9));
+		tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
+		tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
+		tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
+		tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
+		tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
 
 	dev_info(&pci_dev->dev,
-		 "NSC PC21100 TPM revision %d\n",
-		 tpm_read_index(0x27) & 0x1F);
-
-	if (tpm_read_index(NSC_LDC_INDEX) == 0)
-		dev_info(&pci_dev->dev, ": NSC TPM not active\n");
-
-	/* select PM channel 1 */
-	tpm_write_index(NSC_LDN_INDEX, 0x12);
-	tpm_read_index(NSC_LDN_INDEX);
-
-	/* disable the DPM module */
-	tpm_write_index(NSC_LDC_INDEX, 0);
-	tpm_read_index(NSC_LDC_INDEX);
-
-	/* set the data register base addresses */
-	tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
-	tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
-	tpm_read_index(NSC_DIO_INDEX);
-	tpm_read_index(NSC_DIO_INDEX + 1);
-
-	/* set the command register base addresses */
-	tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
-	tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
-	tpm_read_index(NSC_DIO_INDEX);
-	tpm_read_index(NSC_DIO_INDEX + 1);
-
-	/* set the interrupt number to be used for the host interface */
-	tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
-	tpm_write_index(NSC_ITS_INDEX, 0x00);
-	tpm_read_index(NSC_IRQ_INDEX);
+		 "NSC TPM revision %d\n",
+		 tpm_read_index(nscAddrBase, 0x27) & 0x1F);
 
 	/* enable the DPM module */
-	tpm_write_index(NSC_LDC_INDEX, 0x01);
-	tpm_read_index(NSC_LDC_INDEX);
+	tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
 
 	if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
 		goto out_err;
@@ -355,6 +335,9 @@ static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0)},
 	{PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
 	{0,}
 };