summaryrefslogtreecommitdiffstats
path: root/drivers/char/stallion.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/stallion.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/char/stallion.c')
-rw-r--r--drivers/char/stallion.c5197
1 files changed, 5197 insertions, 0 deletions
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
new file mode 100644
index 0000000..de16660
--- /dev/null
+++ b/drivers/char/stallion.c
@@ -0,0 +1,5197 @@
+/*****************************************************************************/
+
+/*
+ * stallion.c -- stallion multiport serial driver.
+ *
+ * Copyright (C) 1996-1999 Stallion Technologies
+ * Copyright (C) 1994-1996 Greg Ungerer.
+ *
+ * This code is loosely based on the Linux serial driver, written by
+ * Linus Torvalds, Theodore T'so and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/cd1400.h>
+#include <linux/sc26198.h>
+#include <linux/comstats.h>
+#include <linux/stallion.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Define different board types. Use the standard Stallion "assigned"
+ * board numbers. Boards supported in this driver are abbreviated as
+ * EIO = EasyIO and ECH = EasyConnection 8/32.
+ */
+#define BRD_EASYIO 20
+#define BRD_ECH 21
+#define BRD_ECHMC 22
+#define BRD_ECHPCI 26
+#define BRD_ECH64PCI 27
+#define BRD_EASYIOPCI 28
+
+/*
+ * Define a configuration structure to hold the board configuration.
+ * Need to set this up in the code (for now) with the boards that are
+ * to be configured into the system. This is what needs to be modified
+ * when adding/removing/modifying boards. Each line entry in the
+ * stl_brdconf[] array is a board. Each line contains io/irq/memory
+ * ranges for that board (as well as what type of board it is).
+ * Some examples:
+ * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },
+ * This line would configure an EasyIO board (4 or 8, no difference),
+ * at io address 2a0 and irq 10.
+ * Another example:
+ * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 },
+ * This line will configure an EasyConnection 8/32 board at primary io
+ * address 2a8, secondary io address 280 and irq 12.
+ * Enter as many lines into this array as you want (only the first 4
+ * will actually be used!). Any combination of EasyIO and EasyConnection
+ * boards can be specified. EasyConnection 8/32 boards can share their
+ * secondary io addresses between each other.
+ *
+ * NOTE: there is no need to put any entries in this table for PCI
+ * boards. They will be found automatically by the driver - provided
+ * PCI BIOS32 support is compiled into the kernel.
+ */
+
+typedef struct {
+ int brdtype;
+ int ioaddr1;
+ int ioaddr2;
+ unsigned long memaddr;
+ int irq;
+ int irqtype;
+} stlconf_t;
+
+static stlconf_t stl_brdconf[] = {
+ /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/
+};
+
+static int stl_nrbrds = sizeof(stl_brdconf) / sizeof(stlconf_t);
+
+/*****************************************************************************/
+
+/*
+ * Define some important driver characteristics. Device major numbers
+ * allocated as per Linux Device Registry.
+ */
+#ifndef STL_SIOMEMMAJOR
+#define STL_SIOMEMMAJOR 28
+#endif
+#ifndef STL_SERIALMAJOR
+#define STL_SERIALMAJOR 24
+#endif
+#ifndef STL_CALLOUTMAJOR
+#define STL_CALLOUTMAJOR 25
+#endif
+
+/*
+ * Set the TX buffer size. Bigger is better, but we don't want
+ * to chew too much memory with buffers!
+ */
+#define STL_TXBUFLOW 512
+#define STL_TXBUFSIZE 4096
+
+/*****************************************************************************/
+
+/*
+ * Define our local driver identity first. Set up stuff to deal with
+ * all the local structures required by a serial tty driver.
+ */
+static char *stl_drvtitle = "Stallion Multiport Serial Driver";
+static char *stl_drvname = "stallion";
+static char *stl_drvversion = "5.6.0";
+
+static struct tty_driver *stl_serial;
+
+/*
+ * We will need to allocate a temporary write buffer for chars that
+ * come direct from user space. The problem is that a copy from user
+ * space might cause a page fault (typically on a system that is
+ * swapping!). All ports will share one buffer - since if the system
+ * is already swapping a shared buffer won't make things any worse.
+ */
+static char *stl_tmpwritebuf;
+static DECLARE_MUTEX(stl_tmpwritesem);
+
+/*
+ * Define a local default termios struct. All ports will be created
+ * with this termios initially. Basically all it defines is a raw port
+ * at 9600, 8 data bits, 1 stop bit.
+ */
+static struct termios stl_deftermios = {
+ .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
+ .c_cc = INIT_C_CC,
+};
+
+/*
+ * Define global stats structures. Not used often, and can be
+ * re-used for each stats call.
+ */
+static comstats_t stl_comstats;
+static combrd_t stl_brdstats;
+static stlbrd_t stl_dummybrd;
+static stlport_t stl_dummyport;
+
+/*
+ * Define global place to put buffer overflow characters.
+ */
+static char stl_unwanted[SC26198_RXFIFOSIZE];
+
+/*****************************************************************************/
+
+static stlbrd_t *stl_brds[STL_MAXBRDS];
+
+/*
+ * Per board state flags. Used with the state field of the board struct.
+ * Not really much here!
+ */
+#define BRD_FOUND 0x1
+
+/*
+ * Define the port structure istate flags. These set of flags are
+ * modified at interrupt time - so setting and reseting them needs
+ * to be atomic. Use the bit clear/setting routines for this.
+ */
+#define ASYI_TXBUSY 1
+#define ASYI_TXLOW 2
+#define ASYI_DCDCHANGE 3
+#define ASYI_TXFLOWED 4
+
+/*
+ * Define an array of board names as printable strings. Handy for
+ * referencing boards when printing trace and stuff.
+ */
+static char *stl_brdnames[] = {
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ "EasyIO",
+ "EC8/32-AT",
+ "EC8/32-MC",
+ (char *) NULL,
+ (char *) NULL,
+ (char *) NULL,
+ "EC8/32-PCI",
+ "EC8/64-PCI",
+ "EasyIO-PCI",
+};
+
+/*****************************************************************************/
+
+/*
+ * Define some string labels for arguments passed from the module
+ * load line. These allow for easy board definitions, and easy
+ * modification of the io, memory and irq resoucres.
+ */
+static int stl_nargs = 0;
+static char *board0[4];
+static char *board1[4];
+static char *board2[4];
+static char *board3[4];
+
+static char **stl_brdsp[] = {
+ (char **) &board0,
+ (char **) &board1,
+ (char **) &board2,
+ (char **) &board3
+};
+
+/*
+ * Define a set of common board names, and types. This is used to
+ * parse any module arguments.
+ */
+
+typedef struct stlbrdtype {
+ char *name;
+ int type;
+} stlbrdtype_t;
+
+static stlbrdtype_t stl_brdstr[] = {
+ { "easyio", BRD_EASYIO },
+ { "eio", BRD_EASYIO },
+ { "20", BRD_EASYIO },
+ { "ec8/32", BRD_ECH },
+ { "ec8/32-at", BRD_ECH },
+ { "ec8/32-isa", BRD_ECH },
+ { "ech", BRD_ECH },
+ { "echat", BRD_ECH },
+ { "21", BRD_ECH },
+ { "ec8/32-mc", BRD_ECHMC },
+ { "ec8/32-mca", BRD_ECHMC },
+ { "echmc", BRD_ECHMC },
+ { "echmca", BRD_ECHMC },
+ { "22", BRD_ECHMC },
+ { "ec8/32-pc", BRD_ECHPCI },
+ { "ec8/32-pci", BRD_ECHPCI },
+ { "26", BRD_ECHPCI },
+ { "ec8/64-pc", BRD_ECH64PCI },
+ { "ec8/64-pci", BRD_ECH64PCI },
+ { "ech-pci", BRD_ECH64PCI },
+ { "echpci", BRD_ECH64PCI },
+ { "echpc", BRD_ECH64PCI },
+ { "27", BRD_ECH64PCI },
+ { "easyio-pc", BRD_EASYIOPCI },
+ { "easyio-pci", BRD_EASYIOPCI },
+ { "eio-pci", BRD_EASYIOPCI },
+ { "eiopci", BRD_EASYIOPCI },
+ { "28", BRD_EASYIOPCI },
+};
+
+/*
+ * Define the module agruments.
+ */
+MODULE_AUTHOR("Greg Ungerer");
+MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
+MODULE_LICENSE("GPL");
+
+module_param_array(board0, charp, &stl_nargs, 0);
+MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
+module_param_array(board1, charp, &stl_nargs, 0);
+MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
+module_param_array(board2, charp, &stl_nargs, 0);
+MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
+module_param_array(board3, charp, &stl_nargs, 0);
+MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
+
+/*****************************************************************************/
+
+/*
+ * Hardware ID bits for the EasyIO and ECH boards. These defines apply
+ * to the directly accessible io ports of these boards (not the uarts -
+ * they are in cd1400.h and sc26198.h).
+ */
+#define EIO_8PORTRS 0x04
+#define EIO_4PORTRS 0x05
+#define EIO_8PORTDI 0x00
+#define EIO_8PORTM 0x06
+#define EIO_MK3 0x03
+#define EIO_IDBITMASK 0x07
+
+#define EIO_BRDMASK 0xf0
+#define ID_BRD4 0x10
+#define ID_BRD8 0x20
+#define ID_BRD16 0x30
+
+#define EIO_INTRPEND 0x08
+#define EIO_INTEDGE 0x00
+#define EIO_INTLEVEL 0x08
+#define EIO_0WS 0x10
+
+#define ECH_ID 0xa0
+#define ECH_IDBITMASK 0xe0
+#define ECH_BRDENABLE 0x08
+#define ECH_BRDDISABLE 0x00
+#define ECH_INTENABLE 0x01
+#define ECH_INTDISABLE 0x00
+#define ECH_INTLEVEL 0x02
+#define ECH_INTEDGE 0x00
+#define ECH_INTRPEND 0x01
+#define ECH_BRDRESET 0x01
+
+#define ECHMC_INTENABLE 0x01
+#define ECHMC_BRDRESET 0x02
+
+#define ECH_PNLSTATUS 2
+#define ECH_PNL16PORT 0x20
+#define ECH_PNLIDMASK 0x07
+#define ECH_PNLXPID 0x40
+#define ECH_PNLINTRPEND 0x80
+
+#define ECH_ADDR2MASK 0x1e0
+
+/*
+ * Define the vector mapping bits for the programmable interrupt board
+ * hardware. These bits encode the interrupt for the board to use - it
+ * is software selectable (except the EIO-8M).
+ */
+static unsigned char stl_vecmap[] = {
+ 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
+ 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
+};
+
+/*
+ * Set up enable and disable macros for the ECH boards. They require
+ * the secondary io address space to be activated and deactivated.
+ * This way all ECH boards can share their secondary io region.
+ * If this is an ECH-PCI board then also need to set the page pointer
+ * to point to the correct page.
+ */
+#define BRDENABLE(brdnr,pagenr) \
+ if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
+ outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \
+ stl_brds[(brdnr)]->ioctrl); \
+ else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \
+ outb((pagenr), stl_brds[(brdnr)]->ioctrl);
+
+#define BRDDISABLE(brdnr) \
+ if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
+ outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \
+ stl_brds[(brdnr)]->ioctrl);
+
+#define STL_CD1400MAXBAUD 230400
+#define STL_SC26198MAXBAUD 460800
+
+#define STL_BAUDBASE 115200
+#define STL_CLOSEDELAY (5 * HZ / 10)
+
+/*****************************************************************************/
+
+#ifdef CONFIG_PCI
+
+/*
+ * Define the Stallion PCI vendor and device IDs.
+ */
+#ifndef PCI_VENDOR_ID_STALLION
+#define PCI_VENDOR_ID_STALLION 0x124d
+#endif
+#ifndef PCI_DEVICE_ID_ECHPCI832
+#define PCI_DEVICE_ID_ECHPCI832 0x0000
+#endif
+#ifndef PCI_DEVICE_ID_ECHPCI864
+#define PCI_DEVICE_ID_ECHPCI864 0x0002
+#endif
+#ifndef PCI_DEVICE_ID_EIOPCI
+#define PCI_DEVICE_ID_EIOPCI 0x0003
+#endif
+
+/*
+ * Define structure to hold all Stallion PCI boards.
+ */
+typedef struct stlpcibrd {
+ unsigned short vendid;
+ unsigned short devid;
+ int brdtype;
+} stlpcibrd_t;
+
+static stlpcibrd_t stl_pcibrds[] = {
+ { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864, BRD_ECH64PCI },
+ { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI, BRD_EASYIOPCI },
+ { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832, BRD_ECHPCI },
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, BRD_ECHPCI },
+};
+
+static int stl_nrpcibrds = sizeof(stl_pcibrds) / sizeof(stlpcibrd_t);
+
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Define macros to extract a brd/port number from a minor number.
+ */
+#define MINOR2BRD(min) (((min) & 0xc0) >> 6)
+#define MINOR2PORT(min) ((min) & 0x3f)
+
+/*
+ * Define a baud rate table that converts termios baud rate selector
+ * into the actual baud rate value. All baud rate calculations are
+ * based on the actual baud rate required.
+ */
+static unsigned int stl_baudrates[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
+};
+
+/*
+ * Define some handy local macros...
+ */
+#undef MIN
+#define MIN(a,b) (((a) <= (b)) ? (a) : (b))
+
+#undef TOLOWER
+#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x))
+
+/*****************************************************************************/
+
+/*
+ * Declare all those functions in this driver!
+ */
+
+static void stl_argbrds(void);
+static int stl_parsebrd(stlconf_t *confp, char **argp);
+
+static unsigned long stl_atol(char *str);
+
+int stl_init(void);
+static int stl_open(struct tty_struct *tty, struct file *filp);
+static void stl_close(struct tty_struct *tty, struct file *filp);
+static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count);
+static void stl_putchar(struct tty_struct *tty, unsigned char ch);
+static void stl_flushchars(struct tty_struct *tty);
+static int stl_writeroom(struct tty_struct *tty);
+static int stl_charsinbuffer(struct tty_struct *tty);
+static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static void stl_settermios(struct tty_struct *tty, struct termios *old);
+static void stl_throttle(struct tty_struct *tty);
+static void stl_unthrottle(struct tty_struct *tty);
+static void stl_stop(struct tty_struct *tty);
+static void stl_start(struct tty_struct *tty);
+static void stl_flushbuffer(struct tty_struct *tty);
+static void stl_breakctl(struct tty_struct *tty, int state);
+static void stl_waituntilsent(struct tty_struct *tty, int timeout);
+static void stl_sendxchar(struct tty_struct *tty, char ch);
+static void stl_hangup(struct tty_struct *tty);
+static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
+static int stl_portinfo(stlport_t *portp, int portnr, char *pos);
+static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data);
+
+static int stl_brdinit(stlbrd_t *brdp);
+static int stl_initports(stlbrd_t *brdp, stlpanel_t *panelp);
+static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp);
+static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp);
+static int stl_getbrdstats(combrd_t __user *bp);
+static int stl_getportstats(stlport_t *portp, comstats_t __user *cp);
+static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp);
+static int stl_getportstruct(stlport_t __user *arg);
+static int stl_getbrdstruct(stlbrd_t __user *arg);
+static int stl_waitcarrier(stlport_t *portp, struct file *filp);
+static int stl_eiointr(stlbrd_t *brdp);
+static int stl_echatintr(stlbrd_t *brdp);
+static int stl_echmcaintr(stlbrd_t *brdp);
+static int stl_echpciintr(stlbrd_t *brdp);
+static int stl_echpci64intr(stlbrd_t *brdp);
+static void stl_offintr(void *private);
+static void *stl_memalloc(int len);
+static stlbrd_t *stl_allocbrd(void);
+static stlport_t *stl_getport(int brdnr, int panelnr, int portnr);
+
+static inline int stl_initbrds(void);
+static inline int stl_initeio(stlbrd_t *brdp);
+static inline int stl_initech(stlbrd_t *brdp);
+static inline int stl_getbrdnr(void);
+
+#ifdef CONFIG_PCI
+static inline int stl_findpcibrds(void);
+static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp);
+#endif
+
+/*
+ * CD1400 uart specific handling functions.
+ */
+static void stl_cd1400setreg(stlport_t *portp, int regnr, int value);
+static int stl_cd1400getreg(stlport_t *portp, int regnr);
+static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value);
+static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
+static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
+static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp);
+static int stl_cd1400getsignals(stlport_t *portp);
+static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts);
+static void stl_cd1400ccrwait(stlport_t *portp);
+static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx);
+static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx);
+static void stl_cd1400disableintrs(stlport_t *portp);
+static void stl_cd1400sendbreak(stlport_t *portp, int len);
+static void stl_cd1400flowctrl(stlport_t *portp, int state);
+static void stl_cd1400sendflow(stlport_t *portp, int state);
+static void stl_cd1400flush(stlport_t *portp);
+static int stl_cd1400datastate(stlport_t *portp);
+static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase);
+static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase);
+static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr);
+static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr);
+static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr);
+
+static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr);
+
+/*
+ * SC26198 uart specific handling functions.
+ */
+static void stl_sc26198setreg(stlport_t *portp, int regnr, int value);
+static int stl_sc26198getreg(stlport_t *portp, int regnr);
+static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value);
+static int stl_sc26198getglobreg(stlport_t *portp, int regnr);
+static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
+static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
+static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp);
+static int stl_sc26198getsignals(stlport_t *portp);
+static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts);
+static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx);
+static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx);
+static void stl_sc26198disableintrs(stlport_t *portp);
+static void stl_sc26198sendbreak(stlport_t *portp, int len);
+static void stl_sc26198flowctrl(stlport_t *portp, int state);
+static void stl_sc26198sendflow(stlport_t *portp, int state);
+static void stl_sc26198flush(stlport_t *portp);
+static int stl_sc26198datastate(stlport_t *portp);
+static void stl_sc26198wait(stlport_t *portp);
+static void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty);
+static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase);
+static void stl_sc26198txisr(stlport_t *port);
+static void stl_sc26198rxisr(stlport_t *port, unsigned int iack);
+static void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch);
+static void stl_sc26198rxbadchars(stlport_t *portp);
+static void stl_sc26198otherisr(stlport_t *port, unsigned int iack);
+
+/*****************************************************************************/
+
+/*
+ * Generic UART support structure.
+ */
+typedef struct uart {
+ int (*panelinit)(stlbrd_t *brdp, stlpanel_t *panelp);
+ void (*portinit)(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
+ void (*setport)(stlport_t *portp, struct termios *tiosp);
+ int (*getsignals)(stlport_t *portp);
+ void (*setsignals)(stlport_t *portp, int dtr, int rts);
+ void (*enablerxtx)(stlport_t *portp, int rx, int tx);
+ void (*startrxtx)(stlport_t *portp, int rx, int tx);
+ void (*disableintrs)(stlport_t *portp);
+ void (*sendbreak)(stlport_t *portp, int len);
+ void (*flowctrl)(stlport_t *portp, int state);
+ void (*sendflow)(stlport_t *portp, int state);
+ void (*flush)(stlport_t *portp);
+ int (*datastate)(stlport_t *portp);
+ void (*intr)(stlpanel_t *panelp, unsigned int iobase);
+} uart_t;
+
+/*
+ * Define some macros to make calling these functions nice and clean.
+ */
+#define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit)
+#define stl_portinit (* ((uart_t *) portp->uartp)->portinit)
+#define stl_setport (* ((uart_t *) portp->uartp)->setport)
+#define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals)
+#define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals)
+#define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx)
+#define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx)
+#define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs)
+#define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak)
+#define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl)
+#define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow)
+#define stl_flush (* ((uart_t *) portp->uartp)->flush)
+#define stl_datastate (* ((uart_t *) portp->uartp)->datastate)
+
+/*****************************************************************************/
+
+/*
+ * CD1400 UART specific data initialization.
+ */
+static uart_t stl_cd1400uart = {
+ stl_cd1400panelinit,
+ stl_cd1400portinit,
+ stl_cd1400setport,
+ stl_cd1400getsignals,
+ stl_cd1400setsignals,
+ stl_cd1400enablerxtx,
+ stl_cd1400startrxtx,
+ stl_cd1400disableintrs,
+ stl_cd1400sendbreak,
+ stl_cd1400flowctrl,
+ stl_cd1400sendflow,
+ stl_cd1400flush,
+ stl_cd1400datastate,
+ stl_cd1400eiointr
+};
+
+/*
+ * Define the offsets within the register bank of a cd1400 based panel.
+ * These io address offsets are common to the EasyIO board as well.
+ */
+#define EREG_ADDR 0
+#define EREG_DATA 4
+#define EREG_RXACK 5
+#define EREG_TXACK 6
+#define EREG_MDACK 7
+
+#define EREG_BANKSIZE 8
+
+#define CD1400_CLK 25000000
+#define CD1400_CLK8M 20000000
+
+/*
+ * Define the cd1400 baud rate clocks. These are used when calculating
+ * what clock and divisor to use for the required baud rate. Also
+ * define the maximum baud rate allowed, and the default base baud.
+ */
+static int stl_cd1400clkdivs[] = {
+ CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4
+};
+
+/*****************************************************************************/
+
+/*
+ * SC26198 UART specific data initization.
+ */
+static uart_t stl_sc26198uart = {
+ stl_sc26198panelinit,
+ stl_sc26198portinit,
+ stl_sc26198setport,
+ stl_sc26198getsignals,
+ stl_sc26198setsignals,
+ stl_sc26198enablerxtx,
+ stl_sc26198startrxtx,
+ stl_sc26198disableintrs,
+ stl_sc26198sendbreak,
+ stl_sc26198flowctrl,
+ stl_sc26198sendflow,
+ stl_sc26198flush,
+ stl_sc26198datastate,
+ stl_sc26198intr
+};
+
+/*
+ * Define the offsets within the register bank of a sc26198 based panel.
+ */
+#define XP_DATA 0
+#define XP_ADDR 1
+#define XP_MODID 2
+#define XP_STATUS 2
+#define XP_IACK 3
+
+#define XP_BANKSIZE 4
+
+/*
+ * Define the sc26198 baud rate table. Offsets within the table
+ * represent the actual baud rate selector of sc26198 registers.
+ */
+static unsigned int sc26198_baudtable[] = {
+ 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
+ 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
+ 230400, 460800, 921600
+};
+
+#define SC26198_NRBAUDS (sizeof(sc26198_baudtable) / sizeof(unsigned int))
+
+/*****************************************************************************/
+
+/*
+ * Define the driver info for a user level control device. Used mainly
+ * to get at port stats - only not using the port device itself.
+ */
+static struct file_operations stl_fsiomem = {
+ .owner = THIS_MODULE,
+ .ioctl = stl_memioctl,
+};
+
+/*****************************************************************************/
+
+static struct class_simple *stallion_class;
+
+/*
+ * Loadable module initialization stuff.
+ */
+
+static int __init stallion_module_init(void)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("init_module()\n");
+#endif
+
+ save_flags(flags);
+ cli();
+ stl_init();
+ restore_flags(flags);
+
+ return(0);
+}
+
+/*****************************************************************************/
+
+static void __exit stallion_module_exit(void)
+{
+ stlbrd_t *brdp;
+ stlpanel_t *panelp;
+ stlport_t *portp;
+ unsigned long flags;
+ int i, j, k;
+
+#ifdef DEBUG
+ printk("cleanup_module()\n");
+#endif
+
+ printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
+ stl_drvversion);
+
+ save_flags(flags);
+ cli();
+
+/*
+ * Free up all allocated resources used by the ports. This includes
+ * memory and interrupts. As part of this process we will also do
+ * a hangup on every open port - to try to flush out any processes
+ * hanging onto ports.
+ */
+ i = tty_unregister_driver(stl_serial);
+ put_tty_driver(stl_serial);
+ if (i) {
+ printk("STALLION: failed to un-register tty driver, "
+ "errno=%d\n", -i);
+ restore_flags(flags);
+ return;
+ }
+ for (i = 0; i < 4; i++) {
+ devfs_remove("staliomem/%d", i);
+ class_simple_device_remove(MKDEV(STL_SIOMEMMAJOR, i));
+ }
+ devfs_remove("staliomem");
+ if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
+ printk("STALLION: failed to un-register serial memory device, "
+ "errno=%d\n", -i);
+ class_simple_destroy(stallion_class);
+
+ if (stl_tmpwritebuf != (char *) NULL)
+ kfree(stl_tmpwritebuf);
+
+ for (i = 0; (i < stl_nrbrds); i++) {
+ if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
+ continue;
+
+ free_irq(brdp->irq, brdp);
+
+ for (j = 0; (j < STL_MAXPANELS); j++) {
+ panelp = brdp->panels[j];
+ if (panelp == (stlpanel_t *) NULL)
+ continue;
+ for (k = 0; (k < STL_PORTSPERPANEL); k++) {
+ portp = panelp->ports[k];
+ if (portp == (stlport_t *) NULL)
+ continue;
+ if (portp->tty != (struct tty_struct *) NULL)
+ stl_hangup(portp->tty);
+ if (portp->tx.buf != (char *) NULL)
+ kfree(portp->tx.buf);
+ kfree(portp);
+ }
+ kfree(panelp);
+ }
+
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
+
+ kfree(brdp);
+ stl_brds[i] = (stlbrd_t *) NULL;
+ }
+
+ restore_flags(flags);
+}
+
+module_init(stallion_module_init);
+module_exit(stallion_module_exit);
+
+/*****************************************************************************/
+
+/*
+ * Check for any arguments passed in on the module load command line.
+ */
+
+static void stl_argbrds(void)
+{
+ stlconf_t conf;
+ stlbrd_t *brdp;
+ int i;
+
+#ifdef DEBUG
+ printk("stl_argbrds()\n");
+#endif
+
+ for (i = stl_nrbrds; (i < stl_nargs); i++) {
+ memset(&conf, 0, sizeof(conf));
+ if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
+ continue;
+ if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
+ continue;
+ stl_nrbrds = i + 1;
+ brdp->brdnr = i;
+ brdp->brdtype = conf.brdtype;
+ brdp->ioaddr1 = conf.ioaddr1;
+ brdp->ioaddr2 = conf.ioaddr2;
+ brdp->irq = conf.irq;
+ brdp->irqtype = conf.irqtype;
+ stl_brdinit(brdp);
+ }
+}
+
+/*****************************************************************************/
+
+/*
+ * Convert an ascii string number into an unsigned long.
+ */
+
+static unsigned long stl_atol(char *str)
+{
+ unsigned long val;
+ int base, c;
+ char *sp;
+
+ val = 0;
+ sp = str;
+ if ((*sp == '0') && (*(sp+1) == 'x')) {
+ base = 16;
+ sp += 2;
+ } else if (*sp == '0') {
+ base = 8;
+ sp++;
+ } else {
+ base = 10;
+ }
+
+ for (; (*sp != 0); sp++) {
+ c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0');
+ if ((c < 0) || (c >= base)) {
+ printk("STALLION: invalid argument %s\n", str);
+ val = 0;
+ break;
+ }
+ val = (val * base) + c;
+ }
+ return(val);
+}
+
+/*****************************************************************************/
+
+/*
+ * Parse the supplied argument string, into the board conf struct.
+ */
+
+static int stl_parsebrd(stlconf_t *confp, char **argp)
+{
+ char *sp;
+ int nrbrdnames, i;
+
+#ifdef DEBUG
+ printk("stl_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp);
+#endif
+
+ if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
+ return(0);
+
+ for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
+ *sp = TOLOWER(*sp);
+
+ nrbrdnames = sizeof(stl_brdstr) / sizeof(stlbrdtype_t);
+ for (i = 0; (i < nrbrdnames); i++) {
+ if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
+ break;
+ }
+ if (i >= nrbrdnames) {
+ printk("STALLION: unknown board name, %s?\n", argp[0]);
+ return(0);
+ }
+
+ confp->brdtype = stl_brdstr[i].type;
+
+ i = 1;
+ if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
+ confp->ioaddr1 = stl_atol(argp[i]);
+ i++;
+ if (confp->brdtype == BRD_ECH) {
+ if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
+ confp->ioaddr2 = stl_atol(argp[i]);
+ i++;
+ }
+ if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
+ confp->irq = stl_atol(argp[i]);
+ return(1);
+}
+
+/*****************************************************************************/
+
+/*
+ * Local driver kernel memory allocation routine.
+ */
+
+static void *stl_memalloc(int len)
+{
+ return((void *) kmalloc(len, GFP_KERNEL));
+}
+
+/*****************************************************************************/
+
+/*
+ * Allocate a new board structure. Fill out the basic info in it.
+ */
+
+static stlbrd_t *stl_allocbrd(void)
+{
+ stlbrd_t *brdp;
+
+ brdp = (stlbrd_t *) stl_memalloc(sizeof(stlbrd_t));
+ if (brdp == (stlbrd_t *) NULL) {
+ printk("STALLION: failed to allocate memory (size=%d)\n",
+ sizeof(stlbrd_t));
+ return((stlbrd_t *) NULL);
+ }
+
+ memset(brdp, 0, sizeof(stlbrd_t));
+ brdp->magic = STL_BOARDMAGIC;
+ return(brdp);
+}
+
+/*****************************************************************************/
+
+static int stl_open(struct tty_struct *tty, struct file *filp)
+{
+ stlport_t *portp;
+ stlbrd_t *brdp;
+ unsigned int minordev;
+ int brdnr, panelnr, portnr, rc;
+
+#ifdef DEBUG
+ printk("stl_open(tty=%x,filp=%x): device=%s\n", (int) tty,
+ (int) filp, tty->name);
+#endif
+
+ minordev = tty->index;
+ brdnr = MINOR2BRD(minordev);
+ if (brdnr >= stl_nrbrds)
+ return(-ENODEV);
+ brdp = stl_brds[brdnr];
+ if (brdp == (stlbrd_t *) NULL)
+ return(-ENODEV);
+ minordev = MINOR2PORT(minordev);
+ for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) {
+ if (brdp->panels[panelnr] == (stlpanel_t *) NULL)
+ break;
+ if (minordev < brdp->panels[panelnr]->nrports) {
+ portnr = minordev;
+ break;
+ }
+ minordev -= brdp->panels[panelnr]->nrports;
+ }
+ if (portnr < 0)
+ return(-ENODEV);
+
+ portp = brdp->panels[panelnr]->ports[portnr];
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+
+/*
+ * On the first open of the device setup the port hardware, and
+ * initialize the per port data structure.
+ */
+ portp->tty = tty;
+ tty->driver_data = portp;
+ portp->refcount++;
+
+ if ((portp->flags & ASYNC_INITIALIZED) == 0) {
+ if (portp->tx.buf == (char *) NULL) {
+ portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE);
+ if (portp->tx.buf == (char *) NULL)
+ return(-ENOMEM);
+ portp->tx.head = portp->tx.buf;
+ portp->tx.tail = portp->tx.buf;
+ }
+ stl_setport(portp, tty->termios);
+ portp->sigs = stl_getsignals(portp);
+ stl_setsignals(portp, 1, 1);
+ stl_enablerxtx(portp, 1, 1);
+ stl_startrxtx(portp, 1, 0);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+ portp->flags |= ASYNC_INITIALIZED;
+ }
+
+/*
+ * Check if this port is in the middle of closing. If so then wait
+ * until it is closed then return error status, based on flag settings.
+ * The sleep here does not need interrupt protection since the wakeup
+ * for it is done with the same context.
+ */
+ if (portp->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&portp->close_wait);
+ if (portp->flags & ASYNC_HUP_NOTIFY)
+ return(-EAGAIN);
+ return(-ERESTARTSYS);
+ }
+
+/*
+ * Based on type of open being done check if it can overlap with any
+ * previous opens still in effect. If we are a normal serial device
+ * then also we might have to wait for carrier.
+ */
+ if (!(filp->f_flags & O_NONBLOCK)) {
+ if ((rc = stl_waitcarrier(portp, filp)) != 0)
+ return(rc);
+ }
+ portp->flags |= ASYNC_NORMAL_ACTIVE;
+
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Possibly need to wait for carrier (DCD signal) to come high. Say
+ * maybe because if we are clocal then we don't need to wait...
+ */
+
+static int stl_waitcarrier(stlport_t *portp, struct file *filp)
+{
+ unsigned long flags;
+ int rc, doclocal;
+
+#ifdef DEBUG
+ printk("stl_waitcarrier(portp=%x,filp=%x)\n", (int) portp, (int) filp);
+#endif
+
+ rc = 0;
+ doclocal = 0;
+
+ if (portp->tty->termios->c_cflag & CLOCAL)
+ doclocal++;
+
+ save_flags(flags);
+ cli();
+ portp->openwaitcnt++;
+ if (! tty_hung_up_p(filp))
+ portp->refcount--;
+
+ for (;;) {
+ stl_setsignals(portp, 1, 1);
+ if (tty_hung_up_p(filp) ||
+ ((portp->flags & ASYNC_INITIALIZED) == 0)) {
+ if (portp->flags & ASYNC_HUP_NOTIFY)
+ rc = -EBUSY;
+ else
+ rc = -ERESTARTSYS;
+ break;
+ }
+ if (((portp->flags & ASYNC_CLOSING) == 0) &&
+ (doclocal || (portp->sigs & TIOCM_CD))) {
+ break;
+ }
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+ interruptible_sleep_on(&portp->open_wait);
+ }
+
+ if (! tty_hung_up_p(filp))
+ portp->refcount++;
+ portp->openwaitcnt--;
+ restore_flags(flags);
+
+ return(rc);
+}
+
+/*****************************************************************************/
+
+static void stl_close(struct tty_struct *tty, struct file *filp)
+{
+ stlport_t *portp;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
+#endif
+
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ if (tty_hung_up_p(filp)) {
+ restore_flags(flags);
+ return;
+ }
+ if ((tty->count == 1) && (portp->refcount != 1))
+ portp->refcount = 1;
+ if (portp->refcount-- > 1) {
+ restore_flags(flags);
+ return;
+ }
+
+ portp->refcount = 0;
+ portp->flags |= ASYNC_CLOSING;
+
+/*
+ * May want to wait for any data to drain before closing. The BUSY
+ * flag keeps track of whether we are still sending or not - it is
+ * very accurate for the cd1400, not quite so for the sc26198.
+ * (The sc26198 has no "end-of-data" interrupt only empty FIFO)
+ */
+ tty->closing = 1;
+ if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, portp->closing_wait);
+ stl_waituntilsent(tty, (HZ / 2));
+
+ portp->flags &= ~ASYNC_INITIALIZED;
+ stl_disableintrs(portp);
+ if (tty->termios->c_cflag & HUPCL)
+ stl_setsignals(portp, 0, 0);
+ stl_enablerxtx(portp, 0, 0);
+ stl_flushbuffer(tty);
+ portp->istate = 0;
+ if (portp->tx.buf != (char *) NULL) {
+ kfree(portp->tx.buf);
+ portp->tx.buf = (char *) NULL;
+ portp->tx.head = (char *) NULL;
+ portp->tx.tail = (char *) NULL;
+ }
+ set_bit(TTY_IO_ERROR, &tty->flags);
+ tty_ldisc_flush(tty);
+
+ tty->closing = 0;
+ portp->tty = (struct tty_struct *) NULL;
+
+ if (portp->openwaitcnt) {
+ if (portp->close_delay)
+ msleep_interruptible(jiffies_to_msecs(portp->close_delay));
+ wake_up_interruptible(&portp->open_wait);
+ }
+
+ portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&portp->close_wait);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Write routine. Take data and stuff it in to the TX ring queue.
+ * If transmit interrupts are not running then start them.
+ */
+
+static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ stlport_t *portp;
+ unsigned int len, stlen;
+ unsigned char *chbuf;
+ char *head, *tail;
+
+#ifdef DEBUG
+ printk("stl_write(tty=%x,buf=%x,count=%d)\n",
+ (int) tty, (int) buf, count);
+#endif
+
+ if ((tty == (struct tty_struct *) NULL) ||
+ (stl_tmpwritebuf == (char *) NULL))
+ return(0);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(0);
+ if (portp->tx.buf == (char *) NULL)
+ return(0);
+
+/*
+ * If copying direct from user space we must cater for page faults,
+ * causing us to "sleep" here for a while. To handle this copy in all
+ * the data we need now, into a local buffer. Then when we got it all
+ * copy it into the TX buffer.
+ */
+ chbuf = (unsigned char *) buf;
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ if (head >= tail) {
+ len = STL_TXBUFSIZE - (head - tail) - 1;
+ stlen = STL_TXBUFSIZE - (head - portp->tx.buf);
+ } else {
+ len = tail - head - 1;
+ stlen = len;
+ }
+
+ len = MIN(len, count);
+ count = 0;
+ while (len > 0) {
+ stlen = MIN(len, stlen);
+ memcpy(head, chbuf, stlen);
+ len -= stlen;
+ chbuf += stlen;
+ count += stlen;
+ head += stlen;
+ if (head >= (portp->tx.buf + STL_TXBUFSIZE)) {
+ head = portp->tx.buf;
+ stlen = tail - head;
+ }
+ }
+ portp->tx.head = head;
+
+ clear_bit(ASYI_TXLOW, &portp->istate);
+ stl_startrxtx(portp, -1, 1);
+
+ return(count);
+}
+
+/*****************************************************************************/
+
+static void stl_putchar(struct tty_struct *tty, unsigned char ch)
+{
+ stlport_t *portp;
+ unsigned int len;
+ char *head, *tail;
+
+#ifdef DEBUG
+ printk("stl_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ if (portp->tx.buf == (char *) NULL)
+ return;
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+
+ len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head);
+ len--;
+
+ if (len > 0) {
+ *head++ = ch;
+ if (head >= (portp->tx.buf + STL_TXBUFSIZE))
+ head = portp->tx.buf;
+ }
+ portp->tx.head = head;
+}
+
+/*****************************************************************************/
+
+/*
+ * If there are any characters in the buffer then make sure that TX
+ * interrupts are on and get'em out. Normally used after the putchar
+ * routine has been called.
+ */
+
+static void stl_flushchars(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_flushchars(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ if (portp->tx.buf == (char *) NULL)
+ return;
+
+#if 0
+ if (tty->stopped || tty->hw_stopped ||
+ (portp->tx.head == portp->tx.tail))
+ return;
+#endif
+ stl_startrxtx(portp, -1, 1);
+}
+
+/*****************************************************************************/
+
+static int stl_writeroom(struct tty_struct *tty)
+{
+ stlport_t *portp;
+ char *head, *tail;
+
+#ifdef DEBUG
+ printk("stl_writeroom(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return(0);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(0);
+ if (portp->tx.buf == (char *) NULL)
+ return(0);
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ return((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
+}
+
+/*****************************************************************************/
+
+/*
+ * Return number of chars in the TX buffer. Normally we would just
+ * calculate the number of chars in the buffer and return that, but if
+ * the buffer is empty and TX interrupts are still on then we return
+ * that the buffer still has 1 char in it. This way whoever called us
+ * will not think that ALL chars have drained - since the UART still
+ * must have some chars in it (we are busy after all).
+ */
+
+static int stl_charsinbuffer(struct tty_struct *tty)
+{
+ stlport_t *portp;
+ unsigned int size;
+ char *head, *tail;
+
+#ifdef DEBUG
+ printk("stl_charsinbuffer(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return(0);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(0);
+ if (portp->tx.buf == (char *) NULL)
+ return(0);
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
+ if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
+ size = 1;
+ return(size);
+}
+
+/*****************************************************************************/
+
+/*
+ * Generate the serial struct info.
+ */
+
+static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp)
+{
+ struct serial_struct sio;
+ stlbrd_t *brdp;
+
+#ifdef DEBUG
+ printk("stl_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
+#endif
+
+ memset(&sio, 0, sizeof(struct serial_struct));
+ sio.line = portp->portnr;
+ sio.port = portp->ioaddr;
+ sio.flags = portp->flags;
+ sio.baud_base = portp->baud_base;
+ sio.close_delay = portp->close_delay;
+ sio.closing_wait = portp->closing_wait;
+ sio.custom_divisor = portp->custom_divisor;
+ sio.hub6 = 0;
+ if (portp->uartp == &stl_cd1400uart) {
+ sio.type = PORT_CIRRUS;
+ sio.xmit_fifo_size = CD1400_TXFIFOSIZE;
+ } else {
+ sio.type = PORT_UNKNOWN;
+ sio.xmit_fifo_size = SC26198_TXFIFOSIZE;
+ }
+
+ brdp = stl_brds[portp->brdnr];
+ if (brdp != (stlbrd_t *) NULL)
+ sio.irq = brdp->irq;
+
+ return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * Set port according to the serial struct info.
+ * At this point we do not do any auto-configure stuff, so we will
+ * just quietly ignore any requests to change irq, etc.
+ */
+
+static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp)
+{
+ struct serial_struct sio;
+
+#ifdef DEBUG
+ printk("stl_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
+#endif
+
+ if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
+ return -EFAULT;
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((sio.baud_base != portp->baud_base) ||
+ (sio.close_delay != portp->close_delay) ||
+ ((sio.flags & ~ASYNC_USR_MASK) !=
+ (portp->flags & ~ASYNC_USR_MASK)))
+ return(-EPERM);
+ }
+
+ portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
+ (sio.flags & ASYNC_USR_MASK);
+ portp->baud_base = sio.baud_base;
+ portp->close_delay = sio.close_delay;
+ portp->closing_wait = sio.closing_wait;
+ portp->custom_divisor = sio.custom_divisor;
+ stl_setport(portp, portp->tty->termios);
+ return(0);
+}
+
+/*****************************************************************************/
+
+static int stl_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ stlport_t *portp;
+
+ if (tty == (struct tty_struct *) NULL)
+ return(-ENODEV);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return(-EIO);
+
+ return stl_getsignals(portp);
+}
+
+static int stl_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ stlport_t *portp;
+ int rts = -1, dtr = -1;
+
+ if (tty == (struct tty_struct *) NULL)
+ return(-ENODEV);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return(-EIO);
+
+ if (set & TIOCM_RTS)
+ rts = 1;
+ if (set & TIOCM_DTR)
+ dtr = 1;
+ if (clear & TIOCM_RTS)
+ rts = 0;
+ if (clear & TIOCM_DTR)
+ dtr = 0;
+
+ stl_setsignals(portp, dtr, rts);
+ return 0;
+}
+
+static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ stlport_t *portp;
+ unsigned int ival;
+ int rc;
+ void __user *argp = (void __user *)arg;
+
+#ifdef DEBUG
+ printk("stl_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n",
+ (int) tty, (int) file, cmd, (int) arg);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return(-ENODEV);
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return(-EIO);
+ }
+
+ rc = 0;
+
+ switch (cmd) {
+ case TIOCGSOFTCAR:
+ rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
+ (unsigned __user *) argp);
+ break;
+ case TIOCSSOFTCAR:
+ if (get_user(ival, (unsigned int __user *) arg))
+ return -EFAULT;
+ tty->termios->c_cflag =
+ (tty->termios->c_cflag & ~CLOCAL) |
+ (ival ? CLOCAL : 0);
+ break;
+ case TIOCGSERIAL:
+ rc = stl_getserial(portp, argp);
+ break;
+ case TIOCSSERIAL:
+ rc = stl_setserial(portp, argp);
+ break;
+ case COM_GETPORTSTATS:
+ rc = stl_getportstats(portp, argp);
+ break;
+ case COM_CLRPORTSTATS:
+ rc = stl_clrportstats(portp, argp);
+ break;
+ case TIOCSERCONFIG:
+ case TIOCSERGWILD:
+ case TIOCSERSWILD:
+ case TIOCSERGETLSR:
+ case TIOCSERGSTRUCT:
+ case TIOCSERGETMULTI:
+ case TIOCSERSETMULTI:
+ default:
+ rc = -ENOIOCTLCMD;
+ break;
+ }
+
+ return(rc);
+}
+
+/*****************************************************************************/
+
+static void stl_settermios(struct tty_struct *tty, struct termios *old)
+{
+ stlport_t *portp;
+ struct termios *tiosp;
+
+#ifdef DEBUG
+ printk("stl_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ tiosp = tty->termios;
+ if ((tiosp->c_cflag == old->c_cflag) &&
+ (tiosp->c_iflag == old->c_iflag))
+ return;
+
+ stl_setport(portp, tiosp);
+ stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0),
+ -1);
+ if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) {
+ tty->hw_stopped = 0;
+ stl_start(tty);
+ }
+ if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
+ wake_up_interruptible(&portp->open_wait);
+}
+
+/*****************************************************************************/
+
+/*
+ * Attempt to flow control who ever is sending us data. Based on termios
+ * settings use software or/and hardware flow control.
+ */
+
+static void stl_throttle(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_throttle(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ stl_flowctrl(portp, 0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Unflow control the device sending us data...
+ */
+
+static void stl_unthrottle(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_unthrottle(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ stl_flowctrl(portp, 1);
+}
+
+/*****************************************************************************/
+
+/*
+ * Stop the transmitter. Basically to do this we will just turn TX
+ * interrupts off.
+ */
+
+static void stl_stop(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_stop(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ stl_startrxtx(portp, -1, 0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Start the transmitter again. Just turn TX interrupts back on.
+ */
+
+static void stl_start(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_start(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+ stl_startrxtx(portp, -1, 1);
+}
+
+/*****************************************************************************/
+
+/*
+ * Hangup this port. This is pretty much like closing the port, only
+ * a little more brutal. No waiting for data to drain. Shutdown the
+ * port and maybe drop signals.
+ */
+
+static void stl_hangup(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_hangup(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ portp->flags &= ~ASYNC_INITIALIZED;
+ stl_disableintrs(portp);
+ if (tty->termios->c_cflag & HUPCL)
+ stl_setsignals(portp, 0, 0);
+ stl_enablerxtx(portp, 0, 0);
+ stl_flushbuffer(tty);
+ portp->istate = 0;
+ set_bit(TTY_IO_ERROR, &tty->flags);
+ if (portp->tx.buf != (char *) NULL) {
+ kfree(portp->tx.buf);
+ portp->tx.buf = (char *) NULL;
+ portp->tx.head = (char *) NULL;
+ portp->tx.tail = (char *) NULL;
+ }
+ portp->tty = (struct tty_struct *) NULL;
+ portp->flags &= ~ASYNC_NORMAL_ACTIVE;
+ portp->refcount = 0;
+ wake_up_interruptible(&portp->open_wait);
+}
+
+/*****************************************************************************/
+
+static void stl_flushbuffer(struct tty_struct *tty)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_flushbuffer(tty=%x)\n", (int) tty);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ stl_flush(portp);
+ tty_wakeup(tty);
+}
+
+/*****************************************************************************/
+
+static void stl_breakctl(struct tty_struct *tty, int state)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_breakctl(tty=%x,state=%d)\n", (int) tty, state);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ stl_sendbreak(portp, ((state == -1) ? 1 : 2));
+}
+
+/*****************************************************************************/
+
+static void stl_waituntilsent(struct tty_struct *tty, int timeout)
+{
+ stlport_t *portp;
+ unsigned long tend;
+
+#ifdef DEBUG
+ printk("stl_waituntilsent(tty=%x,timeout=%d)\n", (int) tty, timeout);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ if (timeout == 0)
+ timeout = HZ;
+ tend = jiffies + timeout;
+
+ while (stl_datastate(portp)) {
+ if (signal_pending(current))
+ break;
+ msleep_interruptible(20);
+ if (time_after_eq(jiffies, tend))
+ break;
+ }
+}
+
+/*****************************************************************************/
+
+static void stl_sendxchar(struct tty_struct *tty, char ch)
+{
+ stlport_t *portp;
+
+#ifdef DEBUG
+ printk("stl_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch);
+#endif
+
+ if (tty == (struct tty_struct *) NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ if (ch == STOP_CHAR(tty))
+ stl_sendflow(portp, 0);
+ else if (ch == START_CHAR(tty))
+ stl_sendflow(portp, 1);
+ else
+ stl_putchar(tty, ch);
+}
+
+/*****************************************************************************/
+
+#define MAXLINE 80
+
+/*
+ * Format info for a specified port. The line is deliberately limited
+ * to 80 characters. (If it is too long it will be truncated, if too
+ * short then padded with spaces).
+ */
+
+static int stl_portinfo(stlport_t *portp, int portnr, char *pos)
+{
+ char *sp;
+ int sigs, cnt;
+
+ sp = pos;
+ sp += sprintf(sp, "%d: uart:%s tx:%d rx:%d",
+ portnr, (portp->hwid == 1) ? "SC26198" : "CD1400",
+ (int) portp->stats.txtotal, (int) portp->stats.rxtotal);
+
+ if (portp->stats.rxframing)
+ sp += sprintf(sp, " fe:%d", (int) portp->stats.rxframing);
+ if (portp->stats.rxparity)
+ sp += sprintf(sp, " pe:%d", (int) portp->stats.rxparity);
+ if (portp->stats.rxbreaks)
+ sp += sprintf(sp, " brk:%d", (int) portp->stats.rxbreaks);
+ if (portp->stats.rxoverrun)
+ sp += sprintf(sp, " oe:%d", (int) portp->stats.rxoverrun);
+
+ sigs = stl_getsignals(portp);
+ cnt = sprintf(sp, "%s%s%s%s%s ",
+ (sigs & TIOCM_RTS) ? "|RTS" : "",
+ (sigs & TIOCM_CTS) ? "|CTS" : "",
+ (sigs & TIOCM_DTR) ? "|DTR" : "",
+ (sigs & TIOCM_CD) ? "|DCD" : "",
+ (sigs & TIOCM_DSR) ? "|DSR" : "");
+ *sp = ' ';
+ sp += cnt;
+
+ for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++)
+ *sp++ = ' ';
+ if (cnt >= MAXLINE)
+ pos[(MAXLINE - 2)] = '+';
+ pos[(MAXLINE - 1)] = '\n';
+
+ return(MAXLINE);
+}
+
+/*****************************************************************************/
+
+/*
+ * Port info, read from the /proc file system.
+ */
+
+static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ stlbrd_t *brdp;
+ stlpanel_t *panelp;
+ stlport_t *portp;
+ int brdnr, panelnr, portnr, totalport;
+ int curoff, maxoff;
+ char *pos;
+
+#ifdef DEBUG
+ printk("stl_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x,"
+ "data=%x\n", (int) page, (int) start, (int) off, count,
+ (int) eof, (int) data);
+#endif
+
+ pos = page;
+ totalport = 0;
+ curoff = 0;
+
+ if (off == 0) {
+ pos += sprintf(pos, "%s: version %s", stl_drvtitle,
+ stl_drvversion);
+ while (pos < (page + MAXLINE - 1))
+ *pos++ = ' ';
+ *pos++ = '\n';
+ }
+ curoff = MAXLINE;
+
+/*
+ * We scan through for each board, panel and port. The offset is
+ * calculated on the fly, and irrelevant ports are skipped.
+ */
+ for (brdnr = 0; (brdnr < stl_nrbrds); brdnr++) {
+ brdp = stl_brds[brdnr];
+ if (brdp == (stlbrd_t *) NULL)
+ continue;
+ if (brdp->state == 0)
+ continue;
+
+ maxoff = curoff + (brdp->nrports * MAXLINE);
+ if (off >= maxoff) {
+ curoff = maxoff;
+ continue;
+ }
+
+ totalport = brdnr * STL_MAXPORTS;
+ for (panelnr = 0; (panelnr < brdp->nrpanels); panelnr++) {
+ panelp = brdp->panels[panelnr];
+ if (panelp == (stlpanel_t *) NULL)
+ continue;
+
+ maxoff = curoff + (panelp->nrports * MAXLINE);
+ if (off >= maxoff) {
+ curoff = maxoff;
+ totalport += panelp->nrports;
+ continue;
+ }
+
+ for (portnr = 0; (portnr < panelp->nrports); portnr++,
+ totalport++) {
+ portp = panelp->ports[portnr];
+ if (portp == (stlport_t *) NULL)
+ continue;
+ if (off >= (curoff += MAXLINE))
+ continue;
+ if ((pos - page + MAXLINE) > count)
+ goto stl_readdone;
+ pos += stl_portinfo(portp, totalport, pos);
+ }
+ }
+ }
+
+ *eof = 1;
+
+stl_readdone:
+ *start = page;
+ return(pos - page);
+}
+
+/*****************************************************************************/
+
+/*
+ * All board interrupts are vectored through here first. This code then
+ * calls off to the approrpriate board interrupt handlers.
+ */
+
+static irqreturn_t stl_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ stlbrd_t *brdp = (stlbrd_t *) dev_id;
+
+#ifdef DEBUG
+ printk("stl_intr(brdp=%x,irq=%d,regs=%x)\n", (int) brdp, irq,
+ (int) regs);
+#endif
+
+ return IRQ_RETVAL((* brdp->isr)(brdp));
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for EasyIO board types.
+ */
+
+static int stl_eiointr(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int iobase;
+ int handled = 0;
+
+ panelp = brdp->panels[0];
+ iobase = panelp->iobase;
+ while (inb(brdp->iostatus) & EIO_INTRPEND) {
+ handled = 1;
+ (* panelp->isr)(panelp, iobase);
+ }
+ return handled;
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for ECH-AT board types.
+ */
+
+static int stl_echatintr(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int ioaddr;
+ int bnknr;
+ int handled = 0;
+
+ outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
+
+ while (inb(brdp->iostatus) & ECH_INTRPEND) {
+ handled = 1;
+ for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ ioaddr = brdp->bnkstataddr[bnknr];
+ if (inb(ioaddr) & ECH_PNLINTRPEND) {
+ panelp = brdp->bnk2panel[bnknr];
+ (* panelp->isr)(panelp, (ioaddr & 0xfffc));
+ }
+ }
+ }
+
+ outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
+
+ return handled;
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for ECH-MCA board types.
+ */
+
+static int stl_echmcaintr(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int ioaddr;
+ int bnknr;
+ int handled = 0;
+
+ while (inb(brdp->iostatus) & ECH_INTRPEND) {
+ handled = 1;
+ for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ ioaddr = brdp->bnkstataddr[bnknr];
+ if (inb(ioaddr) & ECH_PNLINTRPEND) {
+ panelp = brdp->bnk2panel[bnknr];
+ (* panelp->isr)(panelp, (ioaddr & 0xfffc));
+ }
+ }
+ }
+ return handled;
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for ECH-PCI board types.
+ */
+
+static int stl_echpciintr(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int ioaddr;
+ int bnknr, recheck;
+ int handled = 0;
+
+ while (1) {
+ recheck = 0;
+ for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl);
+ ioaddr = brdp->bnkstataddr[bnknr];
+ if (inb(ioaddr) & ECH_PNLINTRPEND) {
+ panelp = brdp->bnk2panel[bnknr];
+ (* panelp->isr)(panelp, (ioaddr & 0xfffc));
+ recheck++;
+ handled = 1;
+ }
+ }
+ if (! recheck)
+ break;
+ }
+ return handled;
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for ECH-8/64-PCI board types.
+ */
+
+static int stl_echpci64intr(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int ioaddr;
+ int bnknr;
+ int handled = 0;
+
+ while (inb(brdp->ioctrl) & 0x1) {
+ handled = 1;
+ for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ ioaddr = brdp->bnkstataddr[bnknr];
+ if (inb(ioaddr) & ECH_PNLINTRPEND) {
+ panelp = brdp->bnk2panel[bnknr];
+ (* panelp->isr)(panelp, (ioaddr & 0xfffc));
+ }
+ }
+ }
+
+ return handled;
+}
+
+/*****************************************************************************/
+
+/*
+ * Service an off-level request for some channel.
+ */
+static void stl_offintr(void *private)
+{
+ stlport_t *portp;
+ struct tty_struct *tty;
+ unsigned int oldsigs;
+
+ portp = private;
+
+#ifdef DEBUG
+ printk("stl_offintr(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ tty = portp->tty;
+ if (tty == (struct tty_struct *) NULL)
+ return;
+
+ lock_kernel();
+ if (test_bit(ASYI_TXLOW, &portp->istate)) {
+ tty_wakeup(tty);
+ }
+ if (test_bit(ASYI_DCDCHANGE, &portp->istate)) {
+ clear_bit(ASYI_DCDCHANGE, &portp->istate);
+ oldsigs = portp->sigs;
+ portp->sigs = stl_getsignals(portp);
+ if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
+ wake_up_interruptible(&portp->open_wait);
+ if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) {
+ if (portp->flags & ASYNC_CHECK_CD)
+ tty_hangup(tty); /* FIXME: module removal race here - AKPM */
+ }
+ }
+ unlock_kernel();
+}
+
+/*****************************************************************************/
+
+/*
+ * Initialize all the ports on a panel.
+ */
+
+static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp)
+{
+ stlport_t *portp;
+ int chipmask, i;
+
+#ifdef DEBUG
+ printk("stl_initports(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
+#endif
+
+ chipmask = stl_panelinit(brdp, panelp);
+
+/*
+ * All UART's are initialized (if found!). Now go through and setup
+ * each ports data structures.
+ */
+ for (i = 0; (i < panelp->nrports); i++) {
+ portp = (stlport_t *) stl_memalloc(sizeof(stlport_t));
+ if (portp == (stlport_t *) NULL) {
+ printk("STALLION: failed to allocate memory "
+ "(size=%d)\n", sizeof(stlport_t));
+ break;
+ }
+ memset(portp, 0, sizeof(stlport_t));
+
+ portp->magic = STL_PORTMAGIC;
+ portp->portnr = i;
+ portp->brdnr = panelp->brdnr;
+ portp->panelnr = panelp->panelnr;
+ portp->uartp = panelp->uartp;
+ portp->clk = brdp->clk;
+ portp->baud_base = STL_BAUDBASE;
+ portp->close_delay = STL_CLOSEDELAY;
+ portp->closing_wait = 30 * HZ;
+ INIT_WORK(&portp->tqueue, stl_offintr, portp);
+ init_waitqueue_head(&portp->open_wait);
+ init_waitqueue_head(&portp->close_wait);
+ portp->stats.brd = portp->brdnr;
+ portp->stats.panel = portp->panelnr;
+ portp->stats.port = portp->portnr;
+ panelp->ports[i] = portp;
+ stl_portinit(brdp, panelp, portp);
+ }
+
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Try to find and initialize an EasyIO board.
+ */
+
+static inline int stl_initeio(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int status;
+ char *name;
+ int rc;
+
+#ifdef DEBUG
+ printk("stl_initeio(brdp=%x)\n", (int) brdp);
+#endif
+
+ brdp->ioctrl = brdp->ioaddr1 + 1;
+ brdp->iostatus = brdp->ioaddr1 + 2;
+
+ status = inb(brdp->iostatus);
+ if ((status & EIO_IDBITMASK) == EIO_MK3)
+ brdp->ioctrl++;
+
+/*
+ * Handle board specific stuff now. The real difference is PCI
+ * or not PCI.
+ */
+ if (brdp->brdtype == BRD_EASYIOPCI) {
+ brdp->iosize1 = 0x80;
+ brdp->iosize2 = 0x80;
+ name = "serial(EIO-PCI)";
+ outb(0x41, (brdp->ioaddr2 + 0x4c));
+ } else {
+ brdp->iosize1 = 8;
+ name = "serial(EIO)";
+ if ((brdp->irq < 0) || (brdp->irq > 15) ||
+ (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
+ printk("STALLION: invalid irq=%d for brd=%d\n",
+ brdp->irq, brdp->brdnr);
+ return(-EINVAL);
+ }
+ outb((stl_vecmap[brdp->irq] | EIO_0WS |
+ ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)),
+ brdp->ioctrl);
+ }
+
+ if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
+ printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
+ "%x conflicts with another device\n", brdp->brdnr,
+ brdp->ioaddr1);
+ return(-EBUSY);
+ }
+
+ if (brdp->iosize2 > 0)
+ if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
+ printk(KERN_WARNING "STALLION: Warning, board %d I/O "
+ "address %x conflicts with another device\n",
+ brdp->brdnr, brdp->ioaddr2);
+ printk(KERN_WARNING "STALLION: Warning, also "
+ "releasing board %d I/O address %x \n",
+ brdp->brdnr, brdp->ioaddr1);
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ return(-EBUSY);
+ }
+
+/*
+ * Everything looks OK, so let's go ahead and probe for the hardware.
+ */
+ brdp->clk = CD1400_CLK;
+ brdp->isr = stl_eiointr;
+
+ switch (status & EIO_IDBITMASK) {
+ case EIO_8PORTM:
+ brdp->clk = CD1400_CLK8M;
+ /* fall thru */
+ case EIO_8PORTRS:
+ case EIO_8PORTDI:
+ brdp->nrports = 8;
+ break;
+ case EIO_4PORTRS:
+ brdp->nrports = 4;
+ break;
+ case EIO_MK3:
+ switch (status & EIO_BRDMASK) {
+ case ID_BRD4:
+ brdp->nrports = 4;
+ break;
+ case ID_BRD8:
+ brdp->nrports = 8;
+ break;
+ case ID_BRD16:
+ brdp->nrports = 16;
+ break;
+ default:
+ return(-ENODEV);
+ }
+ break;
+ default:
+ return(-ENODEV);
+ }
+
+/*
+ * We have verified that the board is actually present, so now we
+ * can complete the setup.
+ */
+
+ panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
+ if (panelp == (stlpanel_t *) NULL) {
+ printk(KERN_WARNING "STALLION: failed to allocate memory "
+ "(size=%d)\n", sizeof(stlpanel_t));
+ return(-ENOMEM);
+ }
+ memset(panelp, 0, sizeof(stlpanel_t));
+
+ panelp->magic = STL_PANELMAGIC;
+ panelp->brdnr = brdp->brdnr;
+ panelp->panelnr = 0;
+ panelp->nrports = brdp->nrports;
+ panelp->iobase = brdp->ioaddr1;
+ panelp->hwid = status;
+ if ((status & EIO_IDBITMASK) == EIO_MK3) {
+ panelp->uartp = (void *) &stl_sc26198uart;
+ panelp->isr = stl_sc26198intr;
+ } else {
+ panelp->uartp = (void *) &stl_cd1400uart;
+ panelp->isr = stl_cd1400eiointr;
+ }
+
+ brdp->panels[0] = panelp;
+ brdp->nrpanels = 1;
+ brdp->state |= BRD_FOUND;
+ brdp->hwid = status;
+ if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ printk("STALLION: failed to register interrupt "
+ "routine for %s irq=%d\n", name, brdp->irq);
+ rc = -ENODEV;
+ } else {
+ rc = 0;
+ }
+ return(rc);
+}
+
+/*****************************************************************************/
+
+/*
+ * Try to find an ECH board and initialize it. This code is capable of
+ * dealing with all types of ECH board.
+ */
+
+static inline int stl_initech(stlbrd_t *brdp)
+{
+ stlpanel_t *panelp;
+ unsigned int status, nxtid, ioaddr, conflict;
+ int panelnr, banknr, i;
+ char *name;
+
+#ifdef DEBUG
+ printk("stl_initech(brdp=%x)\n", (int) brdp);
+#endif
+
+ status = 0;
+ conflict = 0;
+
+/*
+ * Set up the initial board register contents for boards. This varies a
+ * bit between the different board types. So we need to handle each
+ * separately. Also do a check that the supplied IRQ is good.
+ */
+ switch (brdp->brdtype) {
+
+ case BRD_ECH:
+ brdp->isr = stl_echatintr;
+ brdp->ioctrl = brdp->ioaddr1 + 1;
+ brdp->iostatus = brdp->ioaddr1 + 1;
+ status = inb(brdp->iostatus);
+ if ((status & ECH_IDBITMASK) != ECH_ID)
+ return(-ENODEV);
+ if ((brdp->irq < 0) || (brdp->irq > 15) ||
+ (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
+ printk("STALLION: invalid irq=%d for brd=%d\n",
+ brdp->irq, brdp->brdnr);
+ return(-EINVAL);
+ }
+ status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1);
+ status |= (stl_vecmap[brdp->irq] << 1);
+ outb((status | ECH_BRDRESET), brdp->ioaddr1);
+ brdp->ioctrlval = ECH_INTENABLE |
+ ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE);
+ for (i = 0; (i < 10); i++)
+ outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
+ brdp->iosize1 = 2;
+ brdp->iosize2 = 32;
+ name = "serial(EC8/32)";
+ outb(status, brdp->ioaddr1);
+ break;
+
+ case BRD_ECHMC:
+ brdp->isr = stl_echmcaintr;
+ brdp->ioctrl = brdp->ioaddr1 + 0x20;
+ brdp->iostatus = brdp->ioctrl;
+ status = inb(brdp->iostatus);
+ if ((status & ECH_IDBITMASK) != ECH_ID)
+ return(-ENODEV);
+ if ((brdp->irq < 0) || (brdp->irq > 15) ||
+ (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
+ printk("STALLION: invalid irq=%d for brd=%d\n",
+ brdp->irq, brdp->brdnr);
+ return(-EINVAL);
+ }
+ outb(ECHMC_BRDRESET, brdp->ioctrl);
+ outb(ECHMC_INTENABLE, brdp->ioctrl);
+ brdp->iosize1 = 64;
+ name = "serial(EC8/32-MC)";
+ break;
+
+ case BRD_ECHPCI:
+ brdp->isr = stl_echpciintr;
+ brdp->ioctrl = brdp->ioaddr1 + 2;
+ brdp->iosize1 = 4;
+ brdp->iosize2 = 8;
+ name = "serial(EC8/32-PCI)";
+ break;
+
+ case BRD_ECH64PCI:
+ brdp->isr = stl_echpci64intr;
+ brdp->ioctrl = brdp->ioaddr2 + 0x40;
+ outb(0x43, (brdp->ioaddr1 + 0x4c));
+ brdp->iosize1 = 0x80;
+ brdp->iosize2 = 0x80;
+ name = "serial(EC8/64-PCI)";
+ break;
+
+ default:
+ printk("STALLION: unknown board type=%d\n", brdp->brdtype);
+ return(-EINVAL);
+ break;
+ }
+
+/*
+ * Check boards for possible IO address conflicts and return fail status
+ * if an IO conflict found.
+ */
+ if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
+ printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
+ "%x conflicts with another device\n", brdp->brdnr,
+ brdp->ioaddr1);
+ return(-EBUSY);
+ }
+
+ if (brdp->iosize2 > 0)
+ if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
+ printk(KERN_WARNING "STALLION: Warning, board %d I/O "
+ "address %x conflicts with another device\n",
+ brdp->brdnr, brdp->ioaddr2);
+ printk(KERN_WARNING "STALLION: Warning, also "
+ "releasing board %d I/O address %x \n",
+ brdp->brdnr, brdp->ioaddr1);
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ return(-EBUSY);
+ }
+
+/*
+ * Scan through the secondary io address space looking for panels.
+ * As we find'em allocate and initialize panel structures for each.
+ */
+ brdp->clk = CD1400_CLK;
+ brdp->hwid = status;
+
+ ioaddr = brdp->ioaddr2;
+ banknr = 0;
+ panelnr = 0;
+ nxtid = 0;
+
+ for (i = 0; (i < STL_MAXPANELS); i++) {
+ if (brdp->brdtype == BRD_ECHPCI) {
+ outb(nxtid, brdp->ioctrl);
+ ioaddr = brdp->ioaddr2;
+ }
+ status = inb(ioaddr + ECH_PNLSTATUS);
+ if ((status & ECH_PNLIDMASK) != nxtid)
+ break;
+ panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
+ if (panelp == (stlpanel_t *) NULL) {
+ printk("STALLION: failed to allocate memory "
+ "(size=%d)\n", sizeof(stlpanel_t));
+ break;
+ }
+ memset(panelp, 0, sizeof(stlpanel_t));
+ panelp->magic = STL_PANELMAGIC;
+ panelp->brdnr = brdp->brdnr;
+ panelp->panelnr = panelnr;
+ panelp->iobase = ioaddr;
+ panelp->pagenr = nxtid;
+ panelp->hwid = status;
+ brdp->bnk2panel[banknr] = panelp;
+ brdp->bnkpageaddr[banknr] = nxtid;
+ brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS;
+
+ if (status & ECH_PNLXPID) {
+ panelp->uartp = (void *) &stl_sc26198uart;
+ panelp->isr = stl_sc26198intr;
+ if (status & ECH_PNL16PORT) {
+ panelp->nrports = 16;
+ brdp->bnk2panel[banknr] = panelp;
+ brdp->bnkpageaddr[banknr] = nxtid;
+ brdp->bnkstataddr[banknr++] = ioaddr + 4 +
+ ECH_PNLSTATUS;
+ } else {
+ panelp->nrports = 8;
+ }
+ } else {
+ panelp->uartp = (void *) &stl_cd1400uart;
+ panelp->isr = stl_cd1400echintr;
+ if (status & ECH_PNL16PORT) {
+ panelp->nrports = 16;
+ panelp->ackmask = 0x80;
+ if (brdp->brdtype != BRD_ECHPCI)
+ ioaddr += EREG_BANKSIZE;
+ brdp->bnk2panel[banknr] = panelp;
+ brdp->bnkpageaddr[banknr] = ++nxtid;
+ brdp->bnkstataddr[banknr++] = ioaddr +
+ ECH_PNLSTATUS;
+ } else {
+ panelp->nrports = 8;
+ panelp->ackmask = 0xc0;
+ }
+ }
+
+ nxtid++;
+ ioaddr += EREG_BANKSIZE;
+ brdp->nrports += panelp->nrports;
+ brdp->panels[panelnr++] = panelp;
+ if ((brdp->brdtype != BRD_ECHPCI) &&
+ (ioaddr >= (brdp->ioaddr2 + brdp->iosize2)))
+ break;
+ }
+
+ brdp->nrpanels = panelnr;
+ brdp->nrbnks = banknr;
+ if (brdp->brdtype == BRD_ECH)
+ outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
+
+ brdp->state |= BRD_FOUND;
+ if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ printk("STALLION: failed to register interrupt "
+ "routine for %s irq=%d\n", name, brdp->irq);
+ i = -ENODEV;
+ } else {
+ i = 0;
+ }
+
+ return(i);
+}
+
+/*****************************************************************************/
+
+/*
+ * Initialize and configure the specified board.
+ * Scan through all the boards in the configuration and see what we
+ * can find. Handle EIO and the ECH boards a little differently here
+ * since the initial search and setup is very different.
+ */
+
+static int __init stl_brdinit(stlbrd_t *brdp)
+{
+ int i;
+
+#ifdef DEBUG
+ printk("stl_brdinit(brdp=%x)\n", (int) brdp);
+#endif
+
+ switch (brdp->brdtype) {
+ case BRD_EASYIO:
+ case BRD_EASYIOPCI:
+ stl_initeio(brdp);
+ break;
+ case BRD_ECH:
+ case BRD_ECHMC:
+ case BRD_ECHPCI:
+ case BRD_ECH64PCI:
+ stl_initech(brdp);
+ break;
+ default:
+ printk("STALLION: board=%d is unknown board type=%d\n",
+ brdp->brdnr, brdp->brdtype);
+ return(ENODEV);
+ }
+
+ stl_brds[brdp->brdnr] = brdp;
+ if ((brdp->state & BRD_FOUND) == 0) {
+ printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
+ stl_brdnames[brdp->brdtype], brdp->brdnr,
+ brdp->ioaddr1, brdp->irq);
+ return(ENODEV);
+ }
+
+ for (i = 0; (i < STL_MAXPANELS); i++)
+ if (brdp->panels[i] != (stlpanel_t *) NULL)
+ stl_initports(brdp, brdp->panels[i]);
+
+ printk("STALLION: %s found, board=%d io=%x irq=%d "
+ "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype],
+ brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels,
+ brdp->nrports);
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Find the next available board number that is free.
+ */
+
+static inline int stl_getbrdnr(void)
+{
+ int i;
+
+ for (i = 0; (i < STL_MAXBRDS); i++) {
+ if (stl_brds[i] == (stlbrd_t *) NULL) {
+ if (i >= stl_nrbrds)
+ stl_nrbrds = i + 1;
+ return(i);
+ }
+ }
+ return(-1);
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_PCI
+
+/*
+ * We have a Stallion board. Allocate a board structure and
+ * initialize it. Read its IO and IRQ resources from PCI
+ * configuration space.
+ */
+
+static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp)
+{
+ stlbrd_t *brdp;
+
+#ifdef DEBUG
+ printk("stl_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", brdtype,
+ devp->bus->number, devp->devfn);
+#endif
+
+ if (pci_enable_device(devp))
+ return(-EIO);
+ if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
+ return(-ENOMEM);
+ if ((brdp->brdnr = stl_getbrdnr()) < 0) {
+ printk("STALLION: too many boards found, "
+ "maximum supported %d\n", STL_MAXBRDS);
+ return(0);
+ }
+ brdp->brdtype = brdtype;
+
+/*
+ * Different Stallion boards use the BAR registers in different ways,
+ * so set up io addresses based on board type.
+ */
+#ifdef DEBUG
+ printk("%s(%d): BAR[]=%x,%x,%x,%x IRQ=%x\n", __FILE__, __LINE__,
+ pci_resource_start(devp, 0), pci_resource_start(devp, 1),
+ pci_resource_start(devp, 2), pci_resource_start(devp, 3), devp->irq);
+#endif
+
+/*
+ * We have all resources from the board, so let's setup the actual
+ * board structure now.
+ */
+ switch (brdtype) {
+ case BRD_ECHPCI:
+ brdp->ioaddr2 = pci_resource_start(devp, 0);
+ brdp->ioaddr1 = pci_resource_start(devp, 1);
+ break;
+ case BRD_ECH64PCI:
+ brdp->ioaddr2 = pci_resource_start(devp, 2);
+ brdp->ioaddr1 = pci_resource_start(devp, 1);
+ break;
+ case BRD_EASYIOPCI:
+ brdp->ioaddr1 = pci_resource_start(devp, 2);
+ brdp->ioaddr2 = pci_resource_start(devp, 1);
+ break;
+ default:
+ printk("STALLION: unknown PCI board type=%d\n", brdtype);
+ break;
+ }
+
+ brdp->irq = devp->irq;
+ stl_brdinit(brdp);
+
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Find all Stallion PCI boards that might be installed. Initialize each
+ * one as it is found.
+ */
+
+
+static inline int stl_findpcibrds(void)
+{
+ struct pci_dev *dev = NULL;
+ int i, rc;
+
+#ifdef DEBUG
+ printk("stl_findpcibrds()\n");
+#endif
+
+ for (i = 0; (i < stl_nrpcibrds); i++)
+ while ((dev = pci_find_device(stl_pcibrds[i].vendid,
+ stl_pcibrds[i].devid, dev))) {
+
+/*
+ * Found a device on the PCI bus that has our vendor and
+ * device ID. Need to check now that it is really us.
+ */
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+ continue;
+
+ rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev);
+ if (rc)
+ return(rc);
+ }
+
+ return(0);
+}
+
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Scan through all the boards in the configuration and see what we
+ * can find. Handle EIO and the ECH boards a little differently here
+ * since the initial search and setup is too different.
+ */
+
+static inline int stl_initbrds(void)
+{
+ stlbrd_t *brdp;
+ stlconf_t *confp;
+ int i;
+
+#ifdef DEBUG
+ printk("stl_initbrds()\n");
+#endif
+
+ if (stl_nrbrds > STL_MAXBRDS) {
+ printk("STALLION: too many boards in configuration table, "
+ "truncating to %d\n", STL_MAXBRDS);
+ stl_nrbrds = STL_MAXBRDS;
+ }
+
+/*
+ * Firstly scan the list of static boards configured. Allocate
+ * resources and initialize the boards as found.
+ */
+ for (i = 0; (i < stl_nrbrds); i++) {
+ confp = &stl_brdconf[i];
+ stl_parsebrd(confp, stl_brdsp[i]);
+ if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
+ return(-ENOMEM);
+ brdp->brdnr = i;
+ brdp->brdtype = confp->brdtype;
+ brdp->ioaddr1 = confp->ioaddr1;
+ brdp->ioaddr2 = confp->ioaddr2;
+ brdp->irq = confp->irq;
+ brdp->irqtype = confp->irqtype;
+ stl_brdinit(brdp);
+ }
+
+/*
+ * Find any dynamically supported boards. That is via module load
+ * line options or auto-detected on the PCI bus.
+ */
+ stl_argbrds();
+#ifdef CONFIG_PCI
+ stl_findpcibrds();
+#endif
+
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the board stats structure to user app.
+ */
+
+static int stl_getbrdstats(combrd_t __user *bp)
+{
+ stlbrd_t *brdp;
+ stlpanel_t *panelp;
+ int i;
+
+ if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t)))
+ return -EFAULT;
+ if (stl_brdstats.brd >= STL_MAXBRDS)
+ return(-ENODEV);
+ brdp = stl_brds[stl_brdstats.brd];
+ if (brdp == (stlbrd_t *) NULL)
+ return(-ENODEV);
+
+ memset(&stl_brdstats, 0, sizeof(combrd_t));
+ stl_brdstats.brd = brdp->brdnr;
+ stl_brdstats.type = brdp->brdtype;
+ stl_brdstats.hwid = brdp->hwid;
+ stl_brdstats.state = brdp->state;
+ stl_brdstats.ioaddr = brdp->ioaddr1;
+ stl_brdstats.ioaddr2 = brdp->ioaddr2;
+ stl_brdstats.irq = brdp->irq;
+ stl_brdstats.nrpanels = brdp->nrpanels;
+ stl_brdstats.nrports = brdp->nrports;
+ for (i = 0; (i < brdp->nrpanels); i++) {
+ panelp = brdp->panels[i];
+ stl_brdstats.panels[i].panel = i;
+ stl_brdstats.panels[i].hwid = panelp->hwid;
+ stl_brdstats.panels[i].nrports = panelp->nrports;
+ }
+
+ return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * Resolve the referenced port number into a port struct pointer.
+ */
+
+static stlport_t *stl_getport(int brdnr, int panelnr, int portnr)
+{
+ stlbrd_t *brdp;
+ stlpanel_t *panelp;
+
+ if ((brdnr < 0) || (brdnr >= STL_MAXBRDS))
+ return((stlport_t *) NULL);
+ brdp = stl_brds[brdnr];
+ if (brdp == (stlbrd_t *) NULL)
+ return((stlport_t *) NULL);
+ if ((panelnr < 0) || (panelnr >= brdp->nrpanels))
+ return((stlport_t *) NULL);
+ panelp = brdp->panels[panelnr];
+ if (panelp == (stlpanel_t *) NULL)
+ return((stlport_t *) NULL);
+ if ((portnr < 0) || (portnr >= panelp->nrports))
+ return((stlport_t *) NULL);
+ return(panelp->ports[portnr]);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the port stats structure to user app. A NULL port struct
+ * pointer passed in means that we need to find out from the app
+ * what port to get stats for (used through board control device).
+ */
+
+static int stl_getportstats(stlport_t *portp, comstats_t __user *cp)
+{
+ unsigned char *head, *tail;
+ unsigned long flags;
+
+ if (!portp) {
+ if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
+ return -EFAULT;
+ portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
+ stl_comstats.port);
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+ }
+
+ portp->stats.state = portp->istate;
+ portp->stats.flags = portp->flags;
+ portp->stats.hwid = portp->hwid;
+
+ portp->stats.ttystate = 0;
+ portp->stats.cflags = 0;
+ portp->stats.iflags = 0;
+ portp->stats.oflags = 0;
+ portp->stats.lflags = 0;
+ portp->stats.rxbuffered = 0;
+
+ save_flags(flags);
+ cli();
+ if (portp->tty != (struct tty_struct *) NULL) {
+ if (portp->tty->driver_data == portp) {
+ portp->stats.ttystate = portp->tty->flags;
+ portp->stats.rxbuffered = portp->tty->flip.count;
+ if (portp->tty->termios != (struct termios *) NULL) {
+ portp->stats.cflags = portp->tty->termios->c_cflag;
+ portp->stats.iflags = portp->tty->termios->c_iflag;
+ portp->stats.oflags = portp->tty->termios->c_oflag;
+ portp->stats.lflags = portp->tty->termios->c_lflag;
+ }
+ }
+ }
+ restore_flags(flags);
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ portp->stats.txbuffered = ((head >= tail) ? (head - tail) :
+ (STL_TXBUFSIZE - (tail - head)));
+
+ portp->stats.signals = (unsigned long) stl_getsignals(portp);
+
+ return copy_to_user(cp, &portp->stats,
+ sizeof(comstats_t)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * Clear the port stats structure. We also return it zeroed out...
+ */
+
+static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp)
+{
+ if (!portp) {
+ if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
+ return -EFAULT;
+ portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
+ stl_comstats.port);
+ if (portp == (stlport_t *) NULL)
+ return(-ENODEV);
+ }
+
+ memset(&portp->stats, 0, sizeof(comstats_t));
+ portp->stats.brd = portp->brdnr;
+ portp->stats.panel = portp->panelnr;
+ portp->stats.port = portp->portnr;
+ return copy_to_user(cp, &portp->stats,
+ sizeof(comstats_t)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the entire driver ports structure to a user app.
+ */
+
+static int stl_getportstruct(stlport_t __user *arg)
+{
+ stlport_t *portp;
+
+ if (copy_from_user(&stl_dummyport, arg, sizeof(stlport_t)))
+ return -EFAULT;
+ portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr,
+ stl_dummyport.portnr);
+ if (!portp)
+ return -ENODEV;
+ return copy_to_user(arg, portp, sizeof(stlport_t)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the entire driver board structure to a user app.
+ */
+
+static int stl_getbrdstruct(stlbrd_t __user *arg)
+{
+ stlbrd_t *brdp;
+
+ if (copy_from_user(&stl_dummybrd, arg, sizeof(stlbrd_t)))
+ return -EFAULT;
+ if ((stl_dummybrd.brdnr < 0) || (stl_dummybrd.brdnr >= STL_MAXBRDS))
+ return -ENODEV;
+ brdp = stl_brds[stl_dummybrd.brdnr];
+ if (!brdp)
+ return(-ENODEV);
+ return copy_to_user(arg, brdp, sizeof(stlbrd_t)) ? -EFAULT : 0;
+}
+
+/*****************************************************************************/
+
+/*
+ * The "staliomem" device is also required to do some special operations
+ * on the board and/or ports. In this driver it is mostly used for stats
+ * collection.
+ */
+
+static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg)
+{
+ int brdnr, rc;
+ void __user *argp = (void __user *)arg;
+
+#ifdef DEBUG
+ printk("stl_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", (int) ip,
+ (int) fp, cmd, (int) arg);
+#endif
+
+ brdnr = iminor(ip);
+ if (brdnr >= STL_MAXBRDS)
+ return(-ENODEV);
+ rc = 0;
+
+ switch (cmd) {
+ case COM_GETPORTSTATS:
+ rc = stl_getportstats(NULL, argp);
+ break;
+ case COM_CLRPORTSTATS:
+ rc = stl_clrportstats(NULL, argp);
+ break;
+ case COM_GETBRDSTATS:
+ rc = stl_getbrdstats(argp);
+ break;
+ case COM_READPORT:
+ rc = stl_getportstruct(argp);
+ break;
+ case COM_READBOARD:
+ rc = stl_getbrdstruct(argp);
+ break;
+ default:
+ rc = -ENOIOCTLCMD;
+ break;
+ }
+
+ return(rc);
+}
+
+static struct tty_operations stl_ops = {
+ .open = stl_open,
+ .close = stl_close,
+ .write = stl_write,
+ .put_char = stl_putchar,
+ .flush_chars = stl_flushchars,
+ .write_room = stl_writeroom,
+ .chars_in_buffer = stl_charsinbuffer,
+ .ioctl = stl_ioctl,
+ .set_termios = stl_settermios,
+ .throttle = stl_throttle,
+ .unthrottle = stl_unthrottle,
+ .stop = stl_stop,
+ .start = stl_start,
+ .hangup = stl_hangup,
+ .flush_buffer = stl_flushbuffer,
+ .break_ctl = stl_breakctl,
+ .wait_until_sent = stl_waituntilsent,
+ .send_xchar = stl_sendxchar,
+ .read_proc = stl_readproc,
+ .tiocmget = stl_tiocmget,
+ .tiocmset = stl_tiocmset,
+};
+
+/*****************************************************************************/
+
+int __init stl_init(void)
+{
+ int i;
+ printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
+
+ stl_initbrds();
+
+ stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
+ if (!stl_serial)
+ return -1;
+
+/*
+ * Allocate a temporary write buffer.
+ */
+ stl_tmpwritebuf = (char *) stl_memalloc(STL_TXBUFSIZE);
+ if (stl_tmpwritebuf == (char *) NULL)
+ printk("STALLION: failed to allocate memory (size=%d)\n",
+ STL_TXBUFSIZE);
+
+/*
+ * Set up a character driver for per board stuff. This is mainly used
+ * to do stats ioctls on the ports.
+ */
+ if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
+ printk("STALLION: failed to register serial board device\n");
+ devfs_mk_dir("staliomem");
+
+ stallion_class = class_simple_create(THIS_MODULE, "staliomem");
+ for (i = 0; i < 4; i++) {
+ devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
+ S_IFCHR|S_IRUSR|S_IWUSR,
+ "staliomem/%d", i);
+ class_simple_device_add(stallion_class, MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i);
+ }
+
+ stl_serial->owner = THIS_MODULE;
+ stl_serial->driver_name = stl_drvname;
+ stl_serial->name = "ttyE";
+ stl_serial->devfs_name = "tts/E";
+ stl_serial->major = STL_SERIALMAJOR;
+ stl_serial->minor_start = 0;
+ stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
+ stl_serial->subtype = SERIAL_TYPE_NORMAL;
+ stl_serial->init_termios = stl_deftermios;
+ stl_serial->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(stl_serial, &stl_ops);
+
+ if (tty_register_driver(stl_serial)) {
+ put_tty_driver(stl_serial);
+ printk("STALLION: failed to register serial driver\n");
+ return -1;
+ }
+
+ return(0);
+}
+
+/*****************************************************************************/
+/* CD1400 HARDWARE FUNCTIONS */
+/*****************************************************************************/
+
+/*
+ * These functions get/set/update the registers of the cd1400 UARTs.
+ * Access to the cd1400 registers is via an address/data io port pair.
+ * (Maybe should make this inline...)
+ */
+
+static int stl_cd1400getreg(stlport_t *portp, int regnr)
+{
+ outb((regnr + portp->uartaddr), portp->ioaddr);
+ return(inb(portp->ioaddr + EREG_DATA));
+}
+
+static void stl_cd1400setreg(stlport_t *portp, int regnr, int value)
+{
+ outb((regnr + portp->uartaddr), portp->ioaddr);
+ outb(value, portp->ioaddr + EREG_DATA);
+}
+
+static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value)
+{
+ outb((regnr + portp->uartaddr), portp->ioaddr);
+ if (inb(portp->ioaddr + EREG_DATA) != value) {
+ outb(value, portp->ioaddr + EREG_DATA);
+ return(1);
+ }
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Inbitialize the UARTs in a panel. We don't care what sort of board
+ * these ports are on - since the port io registers are almost
+ * identical when dealing with ports.
+ */
+
+static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
+{
+ unsigned int gfrcr;
+ int chipmask, i, j;
+ int nrchips, uartaddr, ioaddr;
+
+#ifdef DEBUG
+ printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
+#endif
+
+ BRDENABLE(panelp->brdnr, panelp->pagenr);
+
+/*
+ * Check that each chip is present and started up OK.
+ */
+ chipmask = 0;
+ nrchips = panelp->nrports / CD1400_PORTS;
+ for (i = 0; (i < nrchips); i++) {
+ if (brdp->brdtype == BRD_ECHPCI) {
+ outb((panelp->pagenr + (i >> 1)), brdp->ioctrl);
+ ioaddr = panelp->iobase;
+ } else {
+ ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1));
+ }
+ uartaddr = (i & 0x01) ? 0x080 : 0;
+ outb((GFRCR + uartaddr), ioaddr);
+ outb(0, (ioaddr + EREG_DATA));
+ outb((CCR + uartaddr), ioaddr);
+ outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
+ outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
+ outb((GFRCR + uartaddr), ioaddr);
+ for (j = 0; (j < CCR_MAXWAIT); j++) {
+ if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0)
+ break;
+ }
+ if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) {
+ printk("STALLION: cd1400 not responding, "
+ "brd=%d panel=%d chip=%d\n",
+ panelp->brdnr, panelp->panelnr, i);
+ continue;
+ }
+ chipmask |= (0x1 << i);
+ outb((PPR + uartaddr), ioaddr);
+ outb(PPR_SCALAR, (ioaddr + EREG_DATA));
+ }
+
+ BRDDISABLE(panelp->brdnr);
+ return(chipmask);
+}
+
+/*****************************************************************************/
+
+/*
+ * Initialize hardware specific port registers.
+ */
+
+static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
+{
+#ifdef DEBUG
+ printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n",
+ (int) brdp, (int) panelp, (int) portp);
+#endif
+
+ if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
+ (portp == (stlport_t *) NULL))
+ return;
+
+ portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
+ (portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
+ portp->uartaddr = (portp->portnr & 0x04) << 5;
+ portp->pagenr = panelp->pagenr + (portp->portnr >> 3);
+
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
+ portp->hwid = stl_cd1400getreg(portp, GFRCR);
+ BRDDISABLE(portp->brdnr);
+}
+
+/*****************************************************************************/
+
+/*
+ * Wait for the command register to be ready. We will poll this,
+ * since it won't usually take too long to be ready.
+ */
+
+static void stl_cd1400ccrwait(stlport_t *portp)
+{
+ int i;
+
+ for (i = 0; (i < CCR_MAXWAIT); i++) {
+ if (stl_cd1400getreg(portp, CCR) == 0) {
+ return;
+ }
+ }
+
+ printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
+ portp->portnr, portp->panelnr, portp->brdnr);
+}
+
+/*****************************************************************************/
+
+/*
+ * Set up the cd1400 registers for a port based on the termios port
+ * settings.
+ */
+
+static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp)
+{
+ stlbrd_t *brdp;
+ unsigned long flags;
+ unsigned int clkdiv, baudrate;
+ unsigned char cor1, cor2, cor3;
+ unsigned char cor4, cor5, ccr;
+ unsigned char srer, sreron, sreroff;
+ unsigned char mcor1, mcor2, rtpr;
+ unsigned char clk, div;
+
+ cor1 = 0;
+ cor2 = 0;
+ cor3 = 0;
+ cor4 = 0;
+ cor5 = 0;
+ ccr = 0;
+ rtpr = 0;
+ clk = 0;
+ div = 0;
+ mcor1 = 0;
+ mcor2 = 0;
+ sreron = 0;
+ sreroff = 0;
+
+ brdp = stl_brds[portp->brdnr];
+ if (brdp == (stlbrd_t *) NULL)
+ return;
+
+/*
+ * Set up the RX char ignore mask with those RX error types we
+ * can ignore. We can get the cd1400 to help us out a little here,
+ * it will ignore parity errors and breaks for us.
+ */
+ portp->rxignoremsk = 0;
+ if (tiosp->c_iflag & IGNPAR) {
+ portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN);
+ cor1 |= COR1_PARIGNORE;
+ }
+ if (tiosp->c_iflag & IGNBRK) {
+ portp->rxignoremsk |= ST_BREAK;
+ cor4 |= COR4_IGNBRK;
+ }
+
+ portp->rxmarkmsk = ST_OVERRUN;
+ if (tiosp->c_iflag & (INPCK | PARMRK))
+ portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING);
+ if (tiosp->c_iflag & BRKINT)
+ portp->rxmarkmsk |= ST_BREAK;
+
+/*
+ * Go through the char size, parity and stop bits and set all the
+ * option register appropriately.
+ */
+ switch (tiosp->c_cflag & CSIZE) {
+ case CS5:
+ cor1 |= COR1_CHL5;
+ break;
+ case CS6:
+ cor1 |= COR1_CHL6;
+ break;
+ case CS7:
+ cor1 |= COR1_CHL7;
+ break;
+ default:
+ cor1 |= COR1_CHL8;
+ break;
+ }
+
+ if (tiosp->c_cflag & CSTOPB)
+ cor1 |= COR1_STOP2;
+ else
+ cor1 |= COR1_STOP1;
+
+ if (tiosp->c_cflag & PARENB) {
+ if (tiosp->c_cflag & PARODD)
+ cor1 |= (COR1_PARENB | COR1_PARODD);
+ else
+ cor1 |= (COR1_PARENB | COR1_PAREVEN);
+ } else {
+ cor1 |= COR1_PARNONE;
+ }
+
+/*
+ * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
+ * space for hardware flow control and the like. This should be set to
+ * VMIN. Also here we will set the RX data timeout to 10ms - this should
+ * really be based on VTIME.
+ */
+ cor3 |= FIFO_RXTHRESHOLD;
+ rtpr = 2;
+
+/*
+ * Calculate the baud rate timers. For now we will just assume that
+ * the input and output baud are the same. Could have used a baud
+ * table here, but this way we can generate virtually any baud rate
+ * we like!
+ */
+ baudrate = tiosp->c_cflag & CBAUD;
+ if (baudrate & CBAUDEX) {
+ baudrate &= ~CBAUDEX;
+ if ((baudrate < 1) || (baudrate > 4))
+ tiosp->c_cflag &= ~CBAUDEX;
+ else
+ baudrate += 15;
+ }
+ baudrate = stl_baudrates[baudrate];
+ if ((tiosp->c_cflag & CBAUD) == B38400) {
+ if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ baudrate = 57600;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ baudrate = 115200;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ baudrate = 230400;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ baudrate = 460800;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ baudrate = (portp->baud_base / portp->custom_divisor);
+ }
+ if (baudrate > STL_CD1400MAXBAUD)
+ baudrate = STL_CD1400MAXBAUD;
+
+ if (baudrate > 0) {
+ for (clk = 0; (clk < CD1400_NUMCLKS); clk++) {
+ clkdiv = ((portp->clk / stl_cd1400clkdivs[clk]) / baudrate);
+ if (clkdiv < 0x100)
+ break;
+ }
+ div = (unsigned char) clkdiv;
+ }
+
+/*
+ * Check what form of modem signaling is required and set it up.
+ */
+ if ((tiosp->c_cflag & CLOCAL) == 0) {
+ mcor1 |= MCOR1_DCD;
+ mcor2 |= MCOR2_DCD;
+ sreron |= SRER_MODEM;
+ portp->flags |= ASYNC_CHECK_CD;
+ } else {
+ portp->flags &= ~ASYNC_CHECK_CD;
+ }
+
+/*
+ * Setup cd1400 enhanced modes if we can. In particular we want to
+ * handle as much of the flow control as possible automatically. As
+ * well as saving a few CPU cycles it will also greatly improve flow
+ * control reliability.
+ */
+ if (tiosp->c_iflag & IXON) {
+ cor2 |= COR2_TXIBE;
+ cor3 |= COR3_SCD12;
+ if (tiosp->c_iflag & IXANY)
+ cor2 |= COR2_IXM;
+ }
+
+ if (tiosp->c_cflag & CRTSCTS) {
+ cor2 |= COR2_CTSAE;
+ mcor1 |= FIFO_RTSTHRESHOLD;
+ }
+
+/*
+ * All cd1400 register values calculated so go through and set
+ * them all up.
+ */
+
+#ifdef DEBUG
+ printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
+ portp->portnr, portp->panelnr, portp->brdnr);
+ printk(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
+ cor1, cor2, cor3, cor4, cor5);
+ printk(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
+ mcor1, mcor2, rtpr, sreron, sreroff);
+ printk(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
+ printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
+ tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
+ tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
+ srer = stl_cd1400getreg(portp, SRER);
+ stl_cd1400setreg(portp, SRER, 0);
+ if (stl_cd1400updatereg(portp, COR1, cor1))
+ ccr = 1;
+ if (stl_cd1400updatereg(portp, COR2, cor2))
+ ccr = 1;
+ if (stl_cd1400updatereg(portp, COR3, cor3))
+ ccr = 1;
+ if (ccr) {
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_CORCHANGE);
+ }
+ stl_cd1400setreg(portp, COR4, cor4);
+ stl_cd1400setreg(portp, COR5, cor5);
+ stl_cd1400setreg(portp, MCOR1, mcor1);
+ stl_cd1400setreg(portp, MCOR2, mcor2);
+ if (baudrate > 0) {
+ stl_cd1400setreg(portp, TCOR, clk);
+ stl_cd1400setreg(portp, TBPR, div);
+ stl_cd1400setreg(portp, RCOR, clk);
+ stl_cd1400setreg(portp, RBPR, div);
+ }
+ stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]);
+ stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]);
+ stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]);
+ stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]);
+ stl_cd1400setreg(portp, RTPR, rtpr);
+ mcor1 = stl_cd1400getreg(portp, MSVR1);
+ if (mcor1 & MSVR1_DCD)
+ portp->sigs |= TIOCM_CD;
+ else
+ portp->sigs &= ~TIOCM_CD;
+ stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Set the state of the DTR and RTS signals.
+ */
+
+static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts)
+{
+ unsigned char msvr1, msvr2;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400setsignals(portp=%x,dtr=%d,rts=%d)\n",
+ (int) portp, dtr, rts);
+#endif
+
+ msvr1 = 0;
+ msvr2 = 0;
+ if (dtr > 0)
+ msvr1 = MSVR1_DTR;
+ if (rts > 0)
+ msvr2 = MSVR2_RTS;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ if (rts >= 0)
+ stl_cd1400setreg(portp, MSVR2, msvr2);
+ if (dtr >= 0)
+ stl_cd1400setreg(portp, MSVR1, msvr1);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the state of the signals.
+ */
+
+static int stl_cd1400getsignals(stlport_t *portp)
+{
+ unsigned char msvr1, msvr2;
+ unsigned long flags;
+ int sigs;
+
+#ifdef DEBUG
+ printk("stl_cd1400getsignals(portp=%x)\n", (int) portp);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ msvr1 = stl_cd1400getreg(portp, MSVR1);
+ msvr2 = stl_cd1400getreg(portp, MSVR2);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+
+ sigs = 0;
+ sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
+ sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0;
+ sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0;
+ sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0;
+#if 0
+ sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0;
+ sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0;
+#else
+ sigs |= TIOCM_DSR;
+#endif
+ return(sigs);
+}
+
+/*****************************************************************************/
+
+/*
+ * Enable/Disable the Transmitter and/or Receiver.
+ */
+
+static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx)
+{
+ unsigned char ccr;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400enablerxtx(portp=%x,rx=%d,tx=%d)\n",
+ (int) portp, rx, tx);
+#endif
+ ccr = 0;
+
+ if (tx == 0)
+ ccr |= CCR_TXDISABLE;
+ else if (tx > 0)
+ ccr |= CCR_TXENABLE;
+ if (rx == 0)
+ ccr |= CCR_RXDISABLE;
+ else if (rx > 0)
+ ccr |= CCR_RXENABLE;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, ccr);
+ stl_cd1400ccrwait(portp);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Start/stop the Transmitter and/or Receiver.
+ */
+
+static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx)
+{
+ unsigned char sreron, sreroff;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400startrxtx(portp=%x,rx=%d,tx=%d)\n",
+ (int) portp, rx, tx);
+#endif
+
+ sreron = 0;
+ sreroff = 0;
+ if (tx == 0)
+ sreroff |= (SRER_TXDATA | SRER_TXEMPTY);
+ else if (tx == 1)
+ sreron |= SRER_TXDATA;
+ else if (tx >= 2)
+ sreron |= SRER_TXEMPTY;
+ if (rx == 0)
+ sreroff |= SRER_RXDATA;
+ else if (rx > 0)
+ sreron |= SRER_RXDATA;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400setreg(portp, SRER,
+ ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron));
+ BRDDISABLE(portp->brdnr);
+ if (tx > 0)
+ set_bit(ASYI_TXBUSY, &portp->istate);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Disable all interrupts from this port.
+ */
+
+static void stl_cd1400disableintrs(stlport_t *portp)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp);
+#endif
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400setreg(portp, SRER, 0);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+static void stl_cd1400sendbreak(stlport_t *portp, int len)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400setreg(portp, SRER,
+ ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) |
+ SRER_TXEMPTY));
+ BRDDISABLE(portp->brdnr);
+ portp->brklen = len;
+ if (len == 1)
+ portp->stats.txbreaks++;
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Take flow control actions...
+ */
+
+static void stl_cd1400flowctrl(stlport_t *portp, int state)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400flowctrl(portp=%x,state=%x)\n", (int) portp, state);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+ tty = portp->tty;
+ if (tty == (struct tty_struct *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+
+ if (state) {
+ if (tty->termios->c_iflag & IXOFF) {
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
+ portp->stats.rxxon++;
+ stl_cd1400ccrwait(portp);
+ }
+/*
+ * Question: should we return RTS to what it was before? It may
+ * have been set by an ioctl... Suppose not, since if you have
+ * hardware flow control set then it is pretty silly to go and
+ * set the RTS line by hand.
+ */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ stl_cd1400setreg(portp, MCOR1,
+ (stl_cd1400getreg(portp, MCOR1) |
+ FIFO_RTSTHRESHOLD));
+ stl_cd1400setreg(portp, MSVR2, MSVR2_RTS);
+ portp->stats.rxrtson++;
+ }
+ } else {
+ if (tty->termios->c_iflag & IXOFF) {
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
+ portp->stats.rxxoff++;
+ stl_cd1400ccrwait(portp);
+ }
+ if (tty->termios->c_cflag & CRTSCTS) {
+ stl_cd1400setreg(portp, MCOR1,
+ (stl_cd1400getreg(portp, MCOR1) & 0xf0));
+ stl_cd1400setreg(portp, MSVR2, 0);
+ portp->stats.rxrtsoff++;
+ }
+ }
+
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Send a flow control character...
+ */
+
+static void stl_cd1400sendflow(stlport_t *portp, int state)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400sendflow(portp=%x,state=%x)\n", (int) portp, state);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+ tty = portp->tty;
+ if (tty == (struct tty_struct *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ if (state) {
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
+ portp->stats.rxxon++;
+ stl_cd1400ccrwait(portp);
+ } else {
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
+ portp->stats.rxxoff++;
+ stl_cd1400ccrwait(portp);
+ }
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+static void stl_cd1400flush(stlport_t *portp)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_cd1400flush(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
+ stl_cd1400ccrwait(portp);
+ stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO);
+ stl_cd1400ccrwait(portp);
+ portp->tx.tail = portp->tx.head;
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the current state of data flow on this port. This is only
+ * really interresting when determining if data has fully completed
+ * transmission or not... This is easy for the cd1400, it accurately
+ * maintains the busy port flag.
+ */
+
+static int stl_cd1400datastate(stlport_t *portp)
+{
+#ifdef DEBUG
+ printk("stl_cd1400datastate(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return(0);
+
+ return(test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for cd1400 EasyIO boards.
+ */
+
+static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase)
+{
+ unsigned char svrtype;
+
+#ifdef DEBUG
+ printk("stl_cd1400eiointr(panelp=%x,iobase=%x)\n",
+ (int) panelp, iobase);
+#endif
+
+ outb(SVRR, iobase);
+ svrtype = inb(iobase + EREG_DATA);
+ if (panelp->nrports > 4) {
+ outb((SVRR + 0x80), iobase);
+ svrtype |= inb(iobase + EREG_DATA);
+ }
+
+ if (svrtype & SVRR_RX)
+ stl_cd1400rxisr(panelp, iobase);
+ else if (svrtype & SVRR_TX)
+ stl_cd1400txisr(panelp, iobase);
+ else if (svrtype & SVRR_MDM)
+ stl_cd1400mdmisr(panelp, iobase);
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for cd1400 panels.
+ */
+
+static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase)
+{
+ unsigned char svrtype;
+
+#ifdef DEBUG
+ printk("stl_cd1400echintr(panelp=%x,iobase=%x)\n", (int) panelp,
+ iobase);
+#endif
+
+ outb(SVRR, iobase);
+ svrtype = inb(iobase + EREG_DATA);
+ outb((SVRR + 0x80), iobase);
+ svrtype |= inb(iobase + EREG_DATA);
+ if (svrtype & SVRR_RX)
+ stl_cd1400rxisr(panelp, iobase);
+ else if (svrtype & SVRR_TX)
+ stl_cd1400txisr(panelp, iobase);
+ else if (svrtype & SVRR_MDM)
+ stl_cd1400mdmisr(panelp, iobase);
+}
+
+
+/*****************************************************************************/
+
+/*
+ * Unfortunately we need to handle breaks in the TX data stream, since
+ * this is the only way to generate them on the cd1400.
+ */
+
+static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr)
+{
+ if (portp->brklen == 1) {
+ outb((COR2 + portp->uartaddr), ioaddr);
+ outb((inb(ioaddr + EREG_DATA) | COR2_ETC),
+ (ioaddr + EREG_DATA));
+ outb((TDR + portp->uartaddr), ioaddr);
+ outb(ETC_CMD, (ioaddr + EREG_DATA));
+ outb(ETC_STARTBREAK, (ioaddr + EREG_DATA));
+ outb((SRER + portp->uartaddr), ioaddr);
+ outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
+ (ioaddr + EREG_DATA));
+ return(1);
+ } else if (portp->brklen > 1) {
+ outb((TDR + portp->uartaddr), ioaddr);
+ outb(ETC_CMD, (ioaddr + EREG_DATA));
+ outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
+ portp->brklen = -1;
+ return(1);
+ } else {
+ outb((COR2 + portp->uartaddr), ioaddr);
+ outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
+ (ioaddr + EREG_DATA));
+ portp->brklen = 0;
+ }
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Transmit interrupt handler. This has gotta be fast! Handling TX
+ * chars is pretty simple, stuff as many as possible from the TX buffer
+ * into the cd1400 FIFO. Must also handle TX breaks here, since they
+ * are embedded as commands in the data stream. Oh no, had to use a goto!
+ * This could be optimized more, will do when I get time...
+ * In practice it is possible that interrupts are enabled but that the
+ * port has been hung up. Need to handle not having any TX buffer here,
+ * this is done by using the side effect that head and tail will also
+ * be NULL if the buffer has been freed.
+ */
+
+static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr)
+{
+ stlport_t *portp;
+ int len, stlen;
+ char *head, *tail;
+ unsigned char ioack, srer;
+
+#ifdef DEBUG
+ printk("stl_cd1400txisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
+#endif
+
+ ioack = inb(ioaddr + EREG_TXACK);
+ if (((ioack & panelp->ackmask) != 0) ||
+ ((ioack & ACK_TYPMASK) != ACK_TYPTX)) {
+ printk("STALLION: bad TX interrupt ack value=%x\n", ioack);
+ return;
+ }
+ portp = panelp->ports[(ioack >> 3)];
+
+/*
+ * Unfortunately we need to handle breaks in the data stream, since
+ * this is the only way to generate them on the cd1400. Do it now if
+ * a break is to be sent.
+ */
+ if (portp->brklen != 0)
+ if (stl_cd1400breakisr(portp, ioaddr))
+ goto stl_txalldone;
+
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
+ if ((len == 0) || ((len < STL_TXBUFLOW) &&
+ (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
+ set_bit(ASYI_TXLOW, &portp->istate);
+ schedule_work(&portp->tqueue);
+ }
+
+ if (len == 0) {
+ outb((SRER + portp->uartaddr), ioaddr);
+ srer = inb(ioaddr + EREG_DATA);
+ if (srer & SRER_TXDATA) {
+ srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY;
+ } else {
+ srer &= ~(SRER_TXDATA | SRER_TXEMPTY);
+ clear_bit(ASYI_TXBUSY, &portp->istate);
+ }
+ outb(srer, (ioaddr + EREG_DATA));
+ } else {
+ len = MIN(len, CD1400_TXFIFOSIZE);
+ portp->stats.txtotal += len;
+ stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ outb((TDR + portp->uartaddr), ioaddr);
+ outsb((ioaddr + EREG_DATA), tail, stlen);
+ len -= stlen;
+ tail += stlen;
+ if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
+ tail = portp->tx.buf;
+ if (len > 0) {
+ outsb((ioaddr + EREG_DATA), tail, len);
+ tail += len;
+ }
+ portp->tx.tail = tail;
+ }
+
+stl_txalldone:
+ outb((EOSRR + portp->uartaddr), ioaddr);
+ outb(0, (ioaddr + EREG_DATA));
+}
+
+/*****************************************************************************/
+
+/*
+ * Receive character interrupt handler. Determine if we have good chars
+ * or bad chars and then process appropriately. Good chars are easy
+ * just shove the lot into the RX buffer and set all status byte to 0.
+ * If a bad RX char then process as required. This routine needs to be
+ * fast! In practice it is possible that we get an interrupt on a port
+ * that is closed. This can happen on hangups - since they completely
+ * shutdown a port not in user context. Need to handle this case.
+ */
+
+static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr)
+{
+ stlport_t *portp;
+ struct tty_struct *tty;
+ unsigned int ioack, len, buflen;
+ unsigned char status;
+ char ch;
+
+#ifdef DEBUG
+ printk("stl_cd1400rxisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
+#endif
+
+ ioack = inb(ioaddr + EREG_RXACK);
+ if ((ioack & panelp->ackmask) != 0) {
+ printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
+ return;
+ }
+ portp = panelp->ports[(ioack >> 3)];
+ tty = portp->tty;
+
+ if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
+ outb((RDCR + portp->uartaddr), ioaddr);
+ len = inb(ioaddr + EREG_DATA);
+ if ((tty == (struct tty_struct *) NULL) ||
+ (tty->flip.char_buf_ptr == (char *) NULL) ||
+ ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ len = MIN(len, sizeof(stl_unwanted));
+ outb((RDSR + portp->uartaddr), ioaddr);
+ insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
+ portp->stats.rxlost += len;
+ portp->stats.rxtotal += len;
+ } else {
+ len = MIN(len, buflen);
+ if (len > 0) {
+ outb((RDSR + portp->uartaddr), ioaddr);
+ insb((ioaddr + EREG_DATA), tty->flip.char_buf_ptr, len);
+ memset(tty->flip.flag_buf_ptr, 0, len);
+ tty->flip.flag_buf_ptr += len;
+ tty->flip.char_buf_ptr += len;
+ tty->flip.count += len;
+ tty_schedule_flip(tty);
+ portp->stats.rxtotal += len;
+ }
+ }
+ } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) {
+ outb((RDSR + portp->uartaddr), ioaddr);
+ status = inb(ioaddr + EREG_DATA);
+ ch = inb(ioaddr + EREG_DATA);
+ if (status & ST_PARITY)
+ portp->stats.rxparity++;
+ if (status & ST_FRAMING)
+ portp->stats.rxframing++;
+ if (status & ST_OVERRUN)
+ portp->stats.rxoverrun++;
+ if (status & ST_BREAK)
+ portp->stats.rxbreaks++;
+ if (status & ST_SCHARMASK) {
+ if ((status & ST_SCHARMASK) == ST_SCHAR1)
+ portp->stats.txxon++;
+ if ((status & ST_SCHARMASK) == ST_SCHAR2)
+ portp->stats.txxoff++;
+ goto stl_rxalldone;
+ }
+ if ((tty != (struct tty_struct *) NULL) &&
+ ((portp->rxignoremsk & status) == 0)) {
+ if (portp->rxmarkmsk & status) {
+ if (status & ST_BREAK) {
+ status = TTY_BREAK;
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ }
+ } else if (status & ST_PARITY) {
+ status = TTY_PARITY;
+ } else if (status & ST_FRAMING) {
+ status = TTY_FRAME;
+ } else if(status & ST_OVERRUN) {
+ status = TTY_OVERRUN;
+ } else {
+ status = 0;
+ }
+ } else {
+ status = 0;
+ }
+ if (tty->flip.char_buf_ptr != (char *) NULL) {
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr++ = status;
+ *tty->flip.char_buf_ptr++ = ch;
+ tty->flip.count++;
+ }
+ tty_schedule_flip(tty);
+ }
+ }
+ } else {
+ printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
+ return;
+ }
+
+stl_rxalldone:
+ outb((EOSRR + portp->uartaddr), ioaddr);
+ outb(0, (ioaddr + EREG_DATA));
+}
+
+/*****************************************************************************/
+
+/*
+ * Modem interrupt handler. The is called when the modem signal line
+ * (DCD) has changed state. Leave most of the work to the off-level
+ * processing routine.
+ */
+
+static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr)
+{
+ stlport_t *portp;
+ unsigned int ioack;
+ unsigned char misr;
+
+#ifdef DEBUG
+ printk("stl_cd1400mdmisr(panelp=%x)\n", (int) panelp);
+#endif
+
+ ioack = inb(ioaddr + EREG_MDACK);
+ if (((ioack & panelp->ackmask) != 0) ||
+ ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) {
+ printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack);
+ return;
+ }
+ portp = panelp->ports[(ioack >> 3)];
+
+ outb((MISR + portp->uartaddr), ioaddr);
+ misr = inb(ioaddr + EREG_DATA);
+ if (misr & MISR_DCD) {
+ set_bit(ASYI_DCDCHANGE, &portp->istate);
+ schedule_work(&portp->tqueue);
+ portp->stats.modem++;
+ }
+
+ outb((EOSRR + portp->uartaddr), ioaddr);
+ outb(0, (ioaddr + EREG_DATA));
+}
+
+/*****************************************************************************/
+/* SC26198 HARDWARE FUNCTIONS */
+/*****************************************************************************/
+
+/*
+ * These functions get/set/update the registers of the sc26198 UARTs.
+ * Access to the sc26198 registers is via an address/data io port pair.
+ * (Maybe should make this inline...)
+ */
+
+static int stl_sc26198getreg(stlport_t *portp, int regnr)
+{
+ outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
+ return(inb(portp->ioaddr + XP_DATA));
+}
+
+static void stl_sc26198setreg(stlport_t *portp, int regnr, int value)
+{
+ outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
+ outb(value, (portp->ioaddr + XP_DATA));
+}
+
+static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value)
+{
+ outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
+ if (inb(portp->ioaddr + XP_DATA) != value) {
+ outb(value, (portp->ioaddr + XP_DATA));
+ return(1);
+ }
+ return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ * Functions to get and set the sc26198 global registers.
+ */
+
+static int stl_sc26198getglobreg(stlport_t *portp, int regnr)
+{
+ outb(regnr, (portp->ioaddr + XP_ADDR));
+ return(inb(portp->ioaddr + XP_DATA));
+}
+
+#if 0
+static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value)
+{
+ outb(regnr, (portp->ioaddr + XP_ADDR));
+ outb(value, (portp->ioaddr + XP_DATA));
+}
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Inbitialize the UARTs in a panel. We don't care what sort of board
+ * these ports are on - since the port io registers are almost
+ * identical when dealing with ports.
+ */
+
+static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
+{
+ int chipmask, i;
+ int nrchips, ioaddr;
+
+#ifdef DEBUG
+ printk("stl_sc26198panelinit(brdp=%x,panelp=%x)\n",
+ (int) brdp, (int) panelp);
+#endif
+
+ BRDENABLE(panelp->brdnr, panelp->pagenr);
+
+/*
+ * Check that each chip is present and started up OK.
+ */
+ chipmask = 0;
+ nrchips = (panelp->nrports + 4) / SC26198_PORTS;
+ if (brdp->brdtype == BRD_ECHPCI)
+ outb(panelp->pagenr, brdp->ioctrl);
+
+ for (i = 0; (i < nrchips); i++) {
+ ioaddr = panelp->iobase + (i * 4);
+ outb(SCCR, (ioaddr + XP_ADDR));
+ outb(CR_RESETALL, (ioaddr + XP_DATA));
+ outb(TSTR, (ioaddr + XP_ADDR));
+ if (inb(ioaddr + XP_DATA) != 0) {
+ printk("STALLION: sc26198 not responding, "
+ "brd=%d panel=%d chip=%d\n",
+ panelp->brdnr, panelp->panelnr, i);
+ continue;
+ }
+ chipmask |= (0x1 << i);
+ outb(GCCR, (ioaddr + XP_ADDR));
+ outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA));
+ outb(WDTRCR, (ioaddr + XP_ADDR));
+ outb(0xff, (ioaddr + XP_DATA));
+ }
+
+ BRDDISABLE(panelp->brdnr);
+ return(chipmask);
+}
+
+/*****************************************************************************/
+
+/*
+ * Initialize hardware specific port registers.
+ */
+
+static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
+{
+#ifdef DEBUG
+ printk("stl_sc26198portinit(brdp=%x,panelp=%x,portp=%x)\n",
+ (int) brdp, (int) panelp, (int) portp);
+#endif
+
+ if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
+ (portp == (stlport_t *) NULL))
+ return;
+
+ portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4);
+ portp->uartaddr = (portp->portnr & 0x07) << 4;
+ portp->pagenr = panelp->pagenr;
+ portp->hwid = 0x1;
+
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS);
+ BRDDISABLE(portp->brdnr);
+}
+
+/*****************************************************************************/
+
+/*
+ * Set up the sc26198 registers for a port based on the termios port
+ * settings.
+ */
+
+static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp)
+{
+ stlbrd_t *brdp;
+ unsigned long flags;
+ unsigned int baudrate;
+ unsigned char mr0, mr1, mr2, clk;
+ unsigned char imron, imroff, iopr, ipr;
+
+ mr0 = 0;
+ mr1 = 0;
+ mr2 = 0;
+ clk = 0;
+ iopr = 0;
+ imron = 0;
+ imroff = 0;
+
+ brdp = stl_brds[portp->brdnr];
+ if (brdp == (stlbrd_t *) NULL)
+ return;
+
+/*
+ * Set up the RX char ignore mask with those RX error types we
+ * can ignore.
+ */
+ portp->rxignoremsk = 0;
+ if (tiosp->c_iflag & IGNPAR)
+ portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING |
+ SR_RXOVERRUN);
+ if (tiosp->c_iflag & IGNBRK)
+ portp->rxignoremsk |= SR_RXBREAK;
+
+ portp->rxmarkmsk = SR_RXOVERRUN;
+ if (tiosp->c_iflag & (INPCK | PARMRK))
+ portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING);
+ if (tiosp->c_iflag & BRKINT)
+ portp->rxmarkmsk |= SR_RXBREAK;
+
+/*
+ * Go through the char size, parity and stop bits and set all the
+ * option register appropriately.
+ */
+ switch (tiosp->c_cflag & CSIZE) {
+ case CS5:
+ mr1 |= MR1_CS5;
+ break;
+ case CS6:
+ mr1 |= MR1_CS6;
+ break;
+ case CS7:
+ mr1 |= MR1_CS7;
+ break;
+ default:
+ mr1 |= MR1_CS8;
+ break;
+ }
+
+ if (tiosp->c_cflag & CSTOPB)
+ mr2 |= MR2_STOP2;
+ else
+ mr2 |= MR2_STOP1;
+
+ if (tiosp->c_cflag & PARENB) {
+ if (tiosp->c_cflag & PARODD)
+ mr1 |= (MR1_PARENB | MR1_PARODD);
+ else
+ mr1 |= (MR1_PARENB | MR1_PAREVEN);
+ } else {
+ mr1 |= MR1_PARNONE;
+ }
+
+ mr1 |= MR1_ERRBLOCK;
+
+/*
+ * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
+ * space for hardware flow control and the like. This should be set to
+ * VMIN.
+ */
+ mr2 |= MR2_RXFIFOHALF;
+
+/*
+ * Calculate the baud rate timers. For now we will just assume that
+ * the input and output baud are the same. The sc26198 has a fixed
+ * baud rate table, so only discrete baud rates possible.
+ */
+ baudrate = tiosp->c_cflag & CBAUD;
+ if (baudrate & CBAUDEX) {
+ baudrate &= ~CBAUDEX;
+ if ((baudrate < 1) || (baudrate > 4))
+ tiosp->c_cflag &= ~CBAUDEX;
+ else
+ baudrate += 15;
+ }
+ baudrate = stl_baudrates[baudrate];
+ if ((tiosp->c_cflag & CBAUD) == B38400) {
+ if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ baudrate = 57600;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ baudrate = 115200;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ baudrate = 230400;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ baudrate = 460800;
+ else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ baudrate = (portp->baud_base / portp->custom_divisor);
+ }
+ if (baudrate > STL_SC26198MAXBAUD)
+ baudrate = STL_SC26198MAXBAUD;
+
+ if (baudrate > 0) {
+ for (clk = 0; (clk < SC26198_NRBAUDS); clk++) {
+ if (baudrate <= sc26198_baudtable[clk])
+ break;
+ }
+ }
+
+/*
+ * Check what form of modem signaling is required and set it up.
+ */
+ if (tiosp->c_cflag & CLOCAL) {
+ portp->flags &= ~ASYNC_CHECK_CD;
+ } else {
+ iopr |= IOPR_DCDCOS;
+ imron |= IR_IOPORT;
+ portp->flags |= ASYNC_CHECK_CD;
+ }
+
+/*
+ * Setup sc26198 enhanced modes if we can. In particular we want to
+ * handle as much of the flow control as possible automatically. As
+ * well as saving a few CPU cycles it will also greatly improve flow
+ * control reliability.
+ */
+ if (tiosp->c_iflag & IXON) {
+ mr0 |= MR0_SWFTX | MR0_SWFT;
+ imron |= IR_XONXOFF;
+ } else {
+ imroff |= IR_XONXOFF;
+ }
+ if (tiosp->c_iflag & IXOFF)
+ mr0 |= MR0_SWFRX;
+
+ if (tiosp->c_cflag & CRTSCTS) {
+ mr2 |= MR2_AUTOCTS;
+ mr1 |= MR1_AUTORTS;
+ }
+
+/*
+ * All sc26198 register values calculated so go through and set
+ * them all up.
+ */
+
+#ifdef DEBUG
+ printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
+ portp->portnr, portp->panelnr, portp->brdnr);
+ printk(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
+ printk(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
+ printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
+ tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
+ tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, IMR, 0);
+ stl_sc26198updatereg(portp, MR0, mr0);
+ stl_sc26198updatereg(portp, MR1, mr1);
+ stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK);
+ stl_sc26198updatereg(portp, MR2, mr2);
+ stl_sc26198updatereg(portp, IOPIOR,
+ ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr));
+
+ if (baudrate > 0) {
+ stl_sc26198setreg(portp, TXCSR, clk);
+ stl_sc26198setreg(portp, RXCSR, clk);
+ }
+
+ stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]);
+ stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]);
+
+ ipr = stl_sc26198getreg(portp, IPR);
+ if (ipr & IPR_DCD)
+ portp->sigs &= ~TIOCM_CD;
+ else
+ portp->sigs |= TIOCM_CD;
+
+ portp->imr = (portp->imr & ~imroff) | imron;
+ stl_sc26198setreg(portp, IMR, portp->imr);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Set the state of the DTR and RTS signals.
+ */
+
+static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts)
+{
+ unsigned char iopioron, iopioroff;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198setsignals(portp=%x,dtr=%d,rts=%d)\n",
+ (int) portp, dtr, rts);
+#endif
+
+ iopioron = 0;
+ iopioroff = 0;
+ if (dtr == 0)
+ iopioroff |= IPR_DTR;
+ else if (dtr > 0)
+ iopioron |= IPR_DTR;
+ if (rts == 0)
+ iopioroff |= IPR_RTS;
+ else if (rts > 0)
+ iopioron |= IPR_RTS;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, IOPIOR,
+ ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the state of the signals.
+ */
+
+static int stl_sc26198getsignals(stlport_t *portp)
+{
+ unsigned char ipr;
+ unsigned long flags;
+ int sigs;
+
+#ifdef DEBUG
+ printk("stl_sc26198getsignals(portp=%x)\n", (int) portp);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ ipr = stl_sc26198getreg(portp, IPR);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+
+ sigs = 0;
+ sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
+ sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS;
+ sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
+ sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
+ sigs |= TIOCM_DSR;
+ return(sigs);
+}
+
+/*****************************************************************************/
+
+/*
+ * Enable/Disable the Transmitter and/or Receiver.
+ */
+
+static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx)
+{
+ unsigned char ccr;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198enablerxtx(portp=%x,rx=%d,tx=%d)\n",
+ (int) portp, rx, tx);
+#endif
+
+ ccr = portp->crenable;
+ if (tx == 0)
+ ccr &= ~CR_TXENABLE;
+ else if (tx > 0)
+ ccr |= CR_TXENABLE;
+ if (rx == 0)
+ ccr &= ~CR_RXENABLE;
+ else if (rx > 0)
+ ccr |= CR_RXENABLE;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, SCCR, ccr);
+ BRDDISABLE(portp->brdnr);
+ portp->crenable = ccr;
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Start/stop the Transmitter and/or Receiver.
+ */
+
+static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx)
+{
+ unsigned char imr;
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198startrxtx(portp=%x,rx=%d,tx=%d)\n",
+ (int) portp, rx, tx);
+#endif
+
+ imr = portp->imr;
+ if (tx == 0)
+ imr &= ~IR_TXRDY;
+ else if (tx == 1)
+ imr |= IR_TXRDY;
+ if (rx == 0)
+ imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG);
+ else if (rx > 0)
+ imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, IMR, imr);
+ BRDDISABLE(portp->brdnr);
+ portp->imr = imr;
+ if (tx > 0)
+ set_bit(ASYI_TXBUSY, &portp->istate);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Disable all interrupts from this port.
+ */
+
+static void stl_sc26198disableintrs(stlport_t *portp)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ portp->imr = 0;
+ stl_sc26198setreg(portp, IMR, 0);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+static void stl_sc26198sendbreak(stlport_t *portp, int len)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len);
+#endif
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ if (len == 1) {
+ stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
+ portp->stats.txbreaks++;
+ } else {
+ stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
+ }
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Take flow control actions...
+ */
+
+static void stl_sc26198flowctrl(stlport_t *portp, int state)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+ unsigned char mr0;
+
+#ifdef DEBUG
+ printk("stl_sc26198flowctrl(portp=%x,state=%x)\n", (int) portp, state);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+ tty = portp->tty;
+ if (tty == (struct tty_struct *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+
+ if (state) {
+ if (tty->termios->c_iflag & IXOFF) {
+ mr0 = stl_sc26198getreg(portp, MR0);
+ stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
+ stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
+ mr0 |= MR0_SWFRX;
+ portp->stats.rxxon++;
+ stl_sc26198wait(portp);
+ stl_sc26198setreg(portp, MR0, mr0);
+ }
+/*
+ * Question: should we return RTS to what it was before? It may
+ * have been set by an ioctl... Suppose not, since if you have
+ * hardware flow control set then it is pretty silly to go and
+ * set the RTS line by hand.
+ */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ stl_sc26198setreg(portp, MR1,
+ (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS));
+ stl_sc26198setreg(portp, IOPIOR,
+ (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS));
+ portp->stats.rxrtson++;
+ }
+ } else {
+ if (tty->termios->c_iflag & IXOFF) {
+ mr0 = stl_sc26198getreg(portp, MR0);
+ stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
+ stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
+ mr0 &= ~MR0_SWFRX;
+ portp->stats.rxxoff++;
+ stl_sc26198wait(portp);
+ stl_sc26198setreg(portp, MR0, mr0);
+ }
+ if (tty->termios->c_cflag & CRTSCTS) {
+ stl_sc26198setreg(portp, MR1,
+ (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS));
+ stl_sc26198setreg(portp, IOPIOR,
+ (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS));
+ portp->stats.rxrtsoff++;
+ }
+ }
+
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Send a flow control character.
+ */
+
+static void stl_sc26198sendflow(stlport_t *portp, int state)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+ unsigned char mr0;
+
+#ifdef DEBUG
+ printk("stl_sc26198sendflow(portp=%x,state=%x)\n", (int) portp, state);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+ tty = portp->tty;
+ if (tty == (struct tty_struct *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ if (state) {
+ mr0 = stl_sc26198getreg(portp, MR0);
+ stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
+ stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
+ mr0 |= MR0_SWFRX;
+ portp->stats.rxxon++;
+ stl_sc26198wait(portp);
+ stl_sc26198setreg(portp, MR0, mr0);
+ } else {
+ mr0 = stl_sc26198getreg(portp, MR0);
+ stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
+ stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
+ mr0 &= ~MR0_SWFRX;
+ portp->stats.rxxoff++;
+ stl_sc26198wait(portp);
+ stl_sc26198setreg(portp, MR0, mr0);
+ }
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+static void stl_sc26198flush(stlport_t *portp)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("stl_sc26198flush(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ stl_sc26198setreg(portp, SCCR, CR_TXRESET);
+ stl_sc26198setreg(portp, SCCR, portp->crenable);
+ BRDDISABLE(portp->brdnr);
+ portp->tx.tail = portp->tx.head;
+ restore_flags(flags);
+}
+
+/*****************************************************************************/
+
+/*
+ * Return the current state of data flow on this port. This is only
+ * really interresting when determining if data has fully completed
+ * transmission or not... The sc26198 interrupt scheme cannot
+ * determine when all data has actually drained, so we need to
+ * check the port statusy register to be sure.
+ */
+
+static int stl_sc26198datastate(stlport_t *portp)
+{
+ unsigned long flags;
+ unsigned char sr;
+
+#ifdef DEBUG
+ printk("stl_sc26198datastate(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return(0);
+ if (test_bit(ASYI_TXBUSY, &portp->istate))
+ return(1);
+
+ save_flags(flags);
+ cli();
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ sr = stl_sc26198getreg(portp, SR);
+ BRDDISABLE(portp->brdnr);
+ restore_flags(flags);
+
+ return((sr & SR_TXEMPTY) ? 0 : 1);
+}
+
+/*****************************************************************************/
+
+/*
+ * Delay for a small amount of time, to give the sc26198 a chance
+ * to process a command...
+ */
+
+static void stl_sc26198wait(stlport_t *portp)
+{
+ int i;
+
+#ifdef DEBUG
+ printk("stl_sc26198wait(portp=%x)\n", (int) portp);
+#endif
+
+ if (portp == (stlport_t *) NULL)
+ return;
+
+ for (i = 0; (i < 20); i++)
+ stl_sc26198getglobreg(portp, TSTR);
+}
+
+/*****************************************************************************/
+
+/*
+ * If we are TX flow controlled and in IXANY mode then we may
+ * need to unflow control here. We gotta do this because of the
+ * automatic flow control modes of the sc26198.
+ */
+
+static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty)
+{
+ unsigned char mr0;
+
+ mr0 = stl_sc26198getreg(portp, MR0);
+ stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
+ stl_sc26198setreg(portp, SCCR, CR_HOSTXON);
+ stl_sc26198wait(portp);
+ stl_sc26198setreg(portp, MR0, mr0);
+ clear_bit(ASYI_TXFLOWED, &portp->istate);
+}
+
+/*****************************************************************************/
+
+/*
+ * Interrupt service routine for sc26198 panels.
+ */
+
+static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase)
+{
+ stlport_t *portp;
+ unsigned int iack;
+
+/*
+ * Work around bug in sc26198 chip... Cannot have A6 address
+ * line of UART high, else iack will be returned as 0.
+ */
+ outb(0, (iobase + 1));
+
+ iack = inb(iobase + XP_IACK);
+ portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)];
+
+ if (iack & IVR_RXDATA)
+ stl_sc26198rxisr(portp, iack);
+ else if (iack & IVR_TXDATA)
+ stl_sc26198txisr(portp);
+ else
+ stl_sc26198otherisr(portp, iack);
+}
+
+/*****************************************************************************/
+
+/*
+ * Transmit interrupt handler. This has gotta be fast! Handling TX
+ * chars is pretty simple, stuff as many as possible from the TX buffer
+ * into the sc26198 FIFO.
+ * In practice it is possible that interrupts are enabled but that the
+ * port has been hung up. Need to handle not having any TX buffer here,
+ * this is done by using the side effect that head and tail will also
+ * be NULL if the buffer has been freed.
+ */
+
+static void stl_sc26198txisr(stlport_t *portp)
+{
+ unsigned int ioaddr;
+ unsigned char mr0;
+ int len, stlen;
+ char *head, *tail;
+
+#ifdef DEBUG
+ printk("stl_sc26198txisr(portp=%x)\n", (int) portp);
+#endif
+
+ ioaddr = portp->ioaddr;
+ head = portp->tx.head;
+ tail = portp->tx.tail;
+ len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
+ if ((len == 0) || ((len < STL_TXBUFLOW) &&
+ (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
+ set_bit(ASYI_TXLOW, &portp->istate);
+ schedule_work(&portp->tqueue);
+ }
+
+ if (len == 0) {
+ outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR));
+ mr0 = inb(ioaddr + XP_DATA);
+ if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) {
+ portp->imr &= ~IR_TXRDY;
+ outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR));
+ outb(portp->imr, (ioaddr + XP_DATA));
+ clear_bit(ASYI_TXBUSY, &portp->istate);
+ } else {
+ mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY);
+ outb(mr0, (ioaddr + XP_DATA));
+ }
+ } else {
+ len = MIN(len, SC26198_TXFIFOSIZE);
+ portp->stats.txtotal += len;
+ stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ outb(GTXFIFO, (ioaddr + XP_ADDR));
+ outsb((ioaddr + XP_DATA), tail, stlen);
+ len -= stlen;
+ tail += stlen;
+ if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
+ tail = portp->tx.buf;
+ if (len > 0) {
+ outsb((ioaddr + XP_DATA), tail, len);
+ tail += len;
+ }
+ portp->tx.tail = tail;
+ }
+}
+
+/*****************************************************************************/
+
+/*
+ * Receive character interrupt handler. Determine if we have good chars
+ * or bad chars and then process appropriately. Good chars are easy
+ * just shove the lot into the RX buffer and set all status byte to 0.
+ * If a bad RX char then process as required. This routine needs to be
+ * fast! In practice it is possible that we get an interrupt on a port
+ * that is closed. This can happen on hangups - since they completely
+ * shutdown a port not in user context. Need to handle this case.
+ */
+
+static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack)
+{
+ struct tty_struct *tty;
+ unsigned int len, buflen, ioaddr;
+
+#ifdef DEBUG
+ printk("stl_sc26198rxisr(portp=%x,iack=%x)\n", (int) portp, iack);
+#endif
+
+ tty = portp->tty;
+ ioaddr = portp->ioaddr;
+ outb(GIBCR, (ioaddr + XP_ADDR));
+ len = inb(ioaddr + XP_DATA) + 1;
+
+ if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
+ if ((tty == (struct tty_struct *) NULL) ||
+ (tty->flip.char_buf_ptr == (char *) NULL) ||
+ ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ len = MIN(len, sizeof(stl_unwanted));
+ outb(GRXFIFO, (ioaddr + XP_ADDR));
+ insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
+ portp->stats.rxlost += len;
+ portp->stats.rxtotal += len;
+ } else {
+ len = MIN(len, buflen);
+ if (len > 0) {
+ outb(GRXFIFO, (ioaddr + XP_ADDR));
+ insb((ioaddr + XP_DATA), tty->flip.char_buf_ptr, len);
+ memset(tty->flip.flag_buf_ptr, 0, len);
+ tty->flip.flag_buf_ptr += len;
+ tty->flip.char_buf_ptr += len;
+ tty->flip.count += len;
+ tty_schedule_flip(tty);
+ portp->stats.rxtotal += len;
+ }
+ }
+ } else {
+ stl_sc26198rxbadchars(portp);
+ }
+
+/*
+ * If we are TX flow controlled and in IXANY mode then we may need
+ * to unflow control here. We gotta do this because of the automatic
+ * flow control modes of the sc26198.
+ */
+ if (test_bit(ASYI_TXFLOWED, &portp->istate)) {
+ if ((tty != (struct tty_struct *) NULL) &&
+ (tty->termios != (struct termios *) NULL) &&
+ (tty->termios->c_iflag & IXANY)) {
+ stl_sc26198txunflow(portp, tty);
+ }
+ }
+}
+
+/*****************************************************************************/
+
+/*
+ * Process an RX bad character.
+ */
+
+static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch)
+{
+ struct tty_struct *tty;
+ unsigned int ioaddr;
+
+ tty = portp->tty;
+ ioaddr = portp->ioaddr;
+
+ if (status & SR_RXPARITY)
+ portp->stats.rxparity++;
+ if (status & SR_RXFRAMING)
+ portp->stats.rxframing++;
+ if (status & SR_RXOVERRUN)
+ portp->stats.rxoverrun++;
+ if (status & SR_RXBREAK)
+ portp->stats.rxbreaks++;
+
+ if ((tty != (struct tty_struct *) NULL) &&
+ ((portp->rxignoremsk & status) == 0)) {
+ if (portp->rxmarkmsk & status) {
+ if (status & SR_RXBREAK) {
+ status = TTY_BREAK;
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ BRDENABLE(portp->brdnr, portp->pagenr);
+ }
+ } else if (status & SR_RXPARITY) {
+ status = TTY_PARITY;
+ } else if (status & SR_RXFRAMING) {
+ status = TTY_FRAME;
+ } else if(status & SR_RXOVERRUN) {
+ status = TTY_OVERRUN;
+ } else {
+ status = 0;
+ }
+ } else {
+ status = 0;
+ }
+
+ if (tty->flip.char_buf_ptr != (char *) NULL) {
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr++ = status;
+ *tty->flip.char_buf_ptr++ = ch;
+ tty->flip.count++;
+ }
+ tty_schedule_flip(tty);
+ }
+
+ if (status == 0)
+ portp->stats.rxtotal++;
+ }
+}
+
+/*****************************************************************************/
+
+/*
+ * Process all characters in the RX FIFO of the UART. Check all char
+ * status bytes as well, and process as required. We need to check
+ * all bytes in the FIFO, in case some more enter the FIFO while we
+ * are here. To get the exact character error type we need to switch
+ * into CHAR error mode (that is why we need to make sure we empty
+ * the FIFO).
+ */
+
+static void stl_sc26198rxbadchars(stlport_t *portp)
+{
+ unsigned char status, mr1;
+ char ch;
+
+/*
+ * To get the precise error type for each character we must switch
+ * back into CHAR error mode.
+ */
+ mr1 = stl_sc26198getreg(portp, MR1);
+ stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK));
+
+ while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) {
+ stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR);
+ ch = stl_sc26198getreg(portp, RXFIFO);
+ stl_sc26198rxbadch(portp, status, ch);
+ }
+
+/*
+ * To get correct interrupt class we must switch back into BLOCK
+ * error mode.
+ */
+ stl_sc26198setreg(portp, MR1, mr1);
+}
+
+/*****************************************************************************/
+
+/*
+ * Other interrupt handler. This includes modem signals, flow
+ * control actions, etc. Most stuff is left to off-level interrupt
+ * processing time.
+ */
+
+static void stl_sc26198otherisr(stlport_t *portp, unsigned int iack)
+{
+ unsigned char cir, ipr, xisr;
+
+#ifdef DEBUG
+ printk("stl_sc26198otherisr(portp=%x,iack=%x)\n", (int) portp, iack);
+#endif
+
+ cir = stl_sc26198getglobreg(portp, CIR);
+
+ switch (cir & CIR_SUBTYPEMASK) {
+ case CIR_SUBCOS:
+ ipr = stl_sc26198getreg(portp, IPR);
+ if (ipr & IPR_DCDCHANGE) {
+ set_bit(ASYI_DCDCHANGE, &portp->istate);
+ schedule_work(&portp->tqueue);
+ portp->stats.modem++;
+ }
+ break;
+ case CIR_SUBXONXOFF:
+ xisr = stl_sc26198getreg(portp, XISR);
+ if (xisr & XISR_RXXONGOT) {
+ set_bit(ASYI_TXFLOWED, &portp->istate);
+ portp->stats.txxoff++;
+ }
+ if (xisr & XISR_RXXOFFGOT) {
+ clear_bit(ASYI_TXFLOWED, &portp->istate);
+ portp->stats.txxon++;
+ }
+ break;
+ case CIR_SUBBREAK:
+ stl_sc26198setreg(portp, SCCR, CR_BREAKRESET);
+ stl_sc26198rxbadchars(portp);
+ break;
+ default:
+ break;
+ }
+}
+
+/*****************************************************************************/
OpenPOWER on IntegriCloud