tty: move obsolete and broken tty drivers to drivers/staging/tty/

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
	epca
	epca
	ip2
	istallion
	riscom8
	serial167
	specialix
	stallion

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 140 deletions

diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h
deleted file mode 100644
index c630052..0000000
--- a/drivers/char/specialix_io8.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *      linux/drivers/char/specialix_io8.h  -- 
- *                                   Specialix IO8+ multiport serial driver.
- *
- *      Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
- *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *
- *      Specialix pays for the development and support of this driver.
- *      Please DO contact io8-linux@specialix.co.uk if you require
- *      support.
- *
- *      This driver was developped in the BitWizard linux device
- *      driver service. If you require a linux device driver for your
- *      product, please contact devices@BitWizard.nl for a quote.
- *
- *      This code is firmly based on the riscom/8 serial driver,
- *      written by Dmitry Gorodchanin. The specialix IO8+ card
- *      programming information was obtained from the CL-CD1865 Data
- *      Book, and Specialix document number 6200059: IO8+ Hardware
- *      Functional Specification.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License as
- *      published by the Free Software Foundation; either version 2 of
- *      the License, or (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- *      USA.
- * */
-
-#ifndef __LINUX_SPECIALIX_H
-#define __LINUX_SPECIALIX_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/* You can have max 4 ISA cards in one PC, and I recommend not much 
-more than a few  PCI versions of the card. */
-
-#define SX_NBOARD		8
-
-/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */
-#define SX_IO_SPACE             4
-/* The PCI version decodes 8 addresses, but still only 2 are used. */
-#define SX_PCI_IO_SPACE         8
-
-/* eight ports per board. */
-#define SX_NPORT        	8
-#define SX_BOARD(line)		((line) / SX_NPORT)
-#define SX_PORT(line)		((line) & (SX_NPORT - 1))
-
-
-#define SX_DATA_REG 0     /* Base+0 : Data register */
-#define SX_ADDR_REG 1     /* base+1 : Address register. */
-
-#define MHz *1000000	/* I'm ashamed of myself. */
-
-/* On-board oscillator frequency */
-#define SX_OSCFREQ      (25 MHz/2)
-/* There is a 25MHz crystal on the board, but the chip is in /2 mode */
-
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define SPECIALIX_TPS		4000
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define SPECIALIX_RXFIFO	6	/* Max. receiver FIFO size (1-8) */
-
-#define SPECIALIX_MAGIC		0x0907
-
-#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait upto
-                                  10 milliseconds before the internal
-                                  processor is available again after
-                                  you give it a command */
-
-#define SX_IOBASE1	0x100
-#define SX_IOBASE2	0x180
-#define SX_IOBASE3	0x250
-#define SX_IOBASE4	0x260
-
-struct specialix_board {
-	unsigned long   flags;
-	unsigned short	base;
-	unsigned char 	irq;
-	//signed   char	count;
-	int count;
-	unsigned char	DTR;
-        int reg;
-	spinlock_t lock;
-};
-
-#define SX_BOARD_PRESENT	0x00000001
-#define SX_BOARD_ACTIVE		0x00000002
-#define SX_BOARD_IS_PCI		0x00000004
-
-
-struct specialix_port {
-	int			magic;
-	struct tty_port		port;
-	int			baud_base;
-	int			flags;
-	int			timeout;
-	unsigned char 		* xmit_buf;
-	int			custom_divisor;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	short			wakeup_chars;
-	short			break_length;
-	unsigned char		mark_mask;
-	unsigned char		IER;
-	unsigned char		MSVR;
-	unsigned char		COR2;
-	unsigned long		overrun;
-	unsigned long		hits[10];
-	spinlock_t lock;
-};
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_SPECIALIX_H */
-
-
-
-
-
-
-
-
-