[PATCH] rio driver rework continued #2

First large chunk of code cleanup.  The split between this and #3 and #4 is
fairly arbitary and due to the message length limit on the list.  These
patches continue the process of ripping out macros and typedefs while cleaning
up lots of 32bit assumptions.  Several inlines for compatibility also get
removed and that causes a lot of noise.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 45 insertions, 63 deletions

diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c
index c622f46..af25d20 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/char/rio/rioparam.c
@@ -157,20 +157,16 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c	1.3";
 ** NB. for MPX
 **	tty lock must NOT have been previously acquired.
 */
-int RIOParam(PortP, cmd, Modem, SleepFlag)
-struct Port *PortP;
-int cmd;
-int Modem;
-int SleepFlag;
+int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
 {
-	register struct tty_struct *TtyP;
+	struct tty_struct *TtyP;
 	int retval;
-	register struct phb_param *phb_param_ptr;
+	struct phb_param *phb_param_ptr;
 	PKT *PacketP;
 	int res;
-	uchar Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
-	uchar TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
-	uchar LNext = 0, TxBaud = 0, RxBaud = 0;
+	u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
+	u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
+	u8 LNext = 0, TxBaud = 0, RxBaud = 0;
 	int retries = 0xff;
 	unsigned long flags;
 
@@ -226,15 +222,12 @@ int SleepFlag;
 		if (retval == RIO_FAIL) {
 			rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-			pseterr(EINTR);
 			func_exit();
-
-			return RIO_FAIL;
+			return -EINTR;
 		}
 		if (PortP->State & RIO_DELETED) {
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			func_exit();
-
 			return RIO_SUCCESS;
 		}
 	}
@@ -247,7 +240,7 @@ int SleepFlag;
 	}
 
 	rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res);
-	rio_dprintk(RIO_DEBUG_PARAM, "Packet is 0x%x\n", (int) PacketP);
+	rio_dprintk(RIO_DEBUG_PARAM, "Packet is 0x%p\n", PacketP);
 
 	phb_param_ptr = (struct phb_param *) PacketP->data;
 
@@ -474,9 +467,6 @@ int SleepFlag;
 		e(115200);	/* e(230400);e(460800); e(921600);  */
 	}
 
-	/* XXX MIssing conversion table. XXX */
-	/*       (TtyP->termios->c_cflag & V_CBAUD); */
-
 	rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);
 
 
@@ -552,23 +542,23 @@ int SleepFlag;
 	/*
 	 ** Actually write the info into the packet to be sent
 	 */
-	WBYTE(phb_param_ptr->Cmd, cmd);
-	WBYTE(phb_param_ptr->Cor1, Cor1);
-	WBYTE(phb_param_ptr->Cor2, Cor2);
-	WBYTE(phb_param_ptr->Cor4, Cor4);
-	WBYTE(phb_param_ptr->Cor5, Cor5);
-	WBYTE(phb_param_ptr->TxXon, TxXon);
-	WBYTE(phb_param_ptr->RxXon, RxXon);
-	WBYTE(phb_param_ptr->TxXoff, TxXoff);
-	WBYTE(phb_param_ptr->RxXoff, RxXoff);
-	WBYTE(phb_param_ptr->LNext, LNext);
-	WBYTE(phb_param_ptr->TxBaud, TxBaud);
-	WBYTE(phb_param_ptr->RxBaud, RxBaud);
+	writeb(cmd, &phb_param_ptr->Cmd);
+	writeb(Cor1, &phb_param_ptr->Cor1);
+	writeb(Cor2, &phb_param_ptr->Cor2);
+	writeb(Cor4, &phb_param_ptr->Cor4);
+	writeb(Cor5, &phb_param_ptr->Cor5);
+	writeb(TxXon, &phb_param_ptr->TxXon);
+	writeb(RxXon, &phb_param_ptr->RxXon);
+	writeb(TxXoff, &phb_param_ptr->TxXoff);
+	writeb(RxXoff, &phb_param_ptr->RxXoff);
+	writeb(LNext, &phb_param_ptr->LNext);
+	writeb(TxBaud, &phb_param_ptr->TxBaud);
+	writeb(RxBaud, &phb_param_ptr->RxBaud);
 
 	/*
 	 ** Set the length/command field
 	 */
-	WBYTE(PacketP->len, 12 | PKT_CMD_BIT);
+	writeb(12 | PKT_CMD_BIT, &PacketP->len);
 
 	/*
 	 ** The packet is formed - now, whack it off
@@ -597,15 +587,13 @@ int SleepFlag;
 ** We can add another packet to a transmit queue if the packet pointer pointed
 ** to by the TxAdd pointer has PKT_IN_USE clear in its address.
 */
-int can_add_transmit(PktP, PortP)
-PKT **PktP;
-struct Port *PortP;
+int can_add_transmit(PKT **PktP, struct Port *PortP)
 {
-	register PKT *tp;
+	PKT *tp;
 
-	*PktP = tp = (PKT *) RIO_PTR(PortP->Caddr, RWORD(*PortP->TxAdd));
+	*PktP = tp = (PKT *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd));
 
-	return !((uint) tp & PKT_IN_USE);
+	return !((unsigned long) tp & PKT_IN_USE);
 }
 
 /*
@@ -613,24 +601,21 @@ struct Port *PortP;
 ** and then move the TxAdd pointer along one position to point to the next
 ** packet pointer. You must wrap the pointer from the end back to the start.
 */
-void add_transmit(PortP)
-struct Port *PortP;
+void add_transmit(struct Port *PortP)
 {
-	if (RWORD(*PortP->TxAdd) & PKT_IN_USE) {
+	if (readw(PortP->TxAdd) & PKT_IN_USE) {
 		rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
 	}
-	WWORD(*(ushort *) PortP->TxAdd, RWORD(*PortP->TxAdd) | PKT_IN_USE);
+	writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd);
 	PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1;
-	WWORD(PortP->PhbP->tx_add, RIO_OFF(PortP->Caddr, PortP->TxAdd));
+	writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add);
 }
 
 /****************************************
  * Put a packet onto the end of the
  * free list
  ****************************************/
-void put_free_end(HostP, PktP)
-struct Host *HostP;
-PKT *PktP;
+void put_free_end(struct Host *HostP, PKT *PktP)
 {
 	FREE_LIST *tmp_pointer;
 	ushort old_end, new_end;
@@ -643,21 +628,21 @@ PKT *PktP;
 	*
 	************************************************/
 
-	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%x)\n", (int) PktP);
+	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP);
 
-	if ((old_end = RWORD(HostP->ParmMapP->free_list_end)) != TPNULL) {
+	if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) {
 		new_end = RIO_OFF(HostP->Caddr, PktP);
 		tmp_pointer = (FREE_LIST *) RIO_PTR(HostP->Caddr, old_end);
-		WWORD(tmp_pointer->next, new_end);
-		WWORD(((FREE_LIST *) PktP)->prev, old_end);
-		WWORD(((FREE_LIST *) PktP)->next, TPNULL);
-		WWORD(HostP->ParmMapP->free_list_end, new_end);
+		writew(new_end, &tmp_pointer->next);
+		writew(old_end, &((FREE_LIST *) PktP)->prev);
+		writew(TPNULL, &((FREE_LIST *) PktP)->next);
+		writew(new_end, &HostP->ParmMapP->free_list_end);
 	} else {		/* First packet on the free list this should never happen! */
 		rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
-		WWORD(HostP->ParmMapP->free_list_end, RIO_OFF(HostP->Caddr, PktP));
+		writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end);
 		tmp_pointer = (FREE_LIST *) PktP;
-		WWORD(tmp_pointer->prev, TPNULL);
-		WWORD(tmp_pointer->next, TPNULL);
+		writew(TPNULL, &tmp_pointer->prev);
+		writew(TPNULL, &tmp_pointer->next);
 	}
 	rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
 	rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
@@ -669,12 +654,10 @@ PKT *PktP;
 ** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
 ** then can_remove_receive() returns 0.
 */
-int can_remove_receive(PktP, PortP)
-PKT **PktP;
-struct Port *PortP;
+int can_remove_receive(PKT **PktP, struct Port *PortP)
 {
-	if (RWORD(*PortP->RxRemove) & PKT_IN_USE) {
-		*PktP = (PKT *) RIO_PTR(PortP->Caddr, RWORD(*PortP->RxRemove) & ~PKT_IN_USE);
+	if (readw(PortP->RxRemove) & PKT_IN_USE) {
+		*PktP = (PKT *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE);
 		return 1;
 	}
 	return 0;
@@ -685,10 +668,9 @@ struct Port *PortP;
 ** and then bump the pointers. Once the pointers get to the end, they must
 ** be wrapped back to the start.
 */
-void remove_receive(PortP)
-struct Port *PortP;
+void remove_receive(struct Port *PortP)
 {
-	WWORD(*PortP->RxRemove, RWORD(*PortP->RxRemove) & ~PKT_IN_USE);
+	writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove);
 	PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1;
-	WWORD(PortP->PhbP->rx_remove, RIO_OFF(PortP->Caddr, PortP->RxRemove));
+	writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove);
 }