Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

11 files changed, 3412 insertions, 0 deletions

diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c
new file mode 100644
index 0000000..ab00f51
--- /dev/null
+++ b/drivers/char/mwave/3780i.c
@@ -0,0 +1,727 @@
+/*
+*
+* 3780i.c -- helper routines for the 3780i DSP
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/unistd.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include "smapi.h"
+#include "mwavedd.h"
+#include "3780i.h"
+
+static DEFINE_SPINLOCK(dsp_lock);
+static unsigned long flags;
+
+
+static void PaceMsaAccess(unsigned short usDspBaseIO)
+{
+	cond_resched();
+	udelay(100);
+	cond_resched();
+}
+
+unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
+                                   unsigned long ulMsaAddr)
+{
+	unsigned short val;
+
+	PRINTK_3(TRACE_3780I,
+		"3780i::dsp3780I_ReadMsaCfg entry usDspBaseIO %x ulMsaAddr %lx\n",
+		usDspBaseIO, ulMsaAddr);
+
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
+	val = InWordDsp(DSP_MsaDataDSISHigh);
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	PRINTK_2(TRACE_3780I, "3780i::dsp3780I_ReadMsaCfg exit val %x\n", val);
+
+	return val;
+}
+
+void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO,
+                          unsigned long ulMsaAddr, unsigned short usValue)
+{
+
+	PRINTK_4(TRACE_3780I,
+		"3780i::dsp3780i_WriteMsaCfg entry usDspBaseIO %x ulMsaAddr %lx usValue %x\n",
+		usDspBaseIO, ulMsaAddr, usValue);
+
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
+	OutWordDsp(DSP_MsaDataDSISHigh, usValue);
+	spin_unlock_irqrestore(&dsp_lock, flags);
+}
+
+void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex,
+                          unsigned char ucValue)
+{
+	DSP_ISA_SLAVE_CONTROL rSlaveControl;
+	DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
+
+
+	PRINTK_4(TRACE_3780I,
+		"3780i::dsp3780i_WriteGenCfg entry usDspBaseIO %x uIndex %x ucValue %x\n",
+		usDspBaseIO, uIndex, ucValue);
+
+	MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_WriteGenCfg rSlaveControl %x\n",
+		MKBYTE(rSlaveControl));
+
+	rSlaveControl_Save = rSlaveControl;
+	rSlaveControl.ConfigMode = TRUE;
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_WriteGenCfg entry rSlaveControl+ConfigMode %x\n",
+		MKBYTE(rSlaveControl));
+
+	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
+	OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
+	OutByteDsp(DSP_ConfigData, ucValue);
+	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_WriteGenCfg exit\n");
+
+
+}
+
+unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO,
+                                  unsigned uIndex)
+{
+	DSP_ISA_SLAVE_CONTROL rSlaveControl;
+	DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
+	unsigned char ucValue;
+
+
+	PRINTK_3(TRACE_3780I,
+		"3780i::dsp3780i_ReadGenCfg entry usDspBaseIO %x uIndex %x\n",
+		usDspBaseIO, uIndex);
+
+	MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
+	rSlaveControl_Save = rSlaveControl;
+	rSlaveControl.ConfigMode = TRUE;
+	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
+	OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
+	ucValue = InByteDsp(DSP_ConfigData);
+	OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_ReadGenCfg exit ucValue %x\n", ucValue);
+
+
+	return ucValue;
+}
+
+int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings,
+                       unsigned short *pIrqMap,
+                       unsigned short *pDmaMap)
+{
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	int i;
+	DSP_UART_CFG_1 rUartCfg1;
+	DSP_UART_CFG_2 rUartCfg2;
+	DSP_HBRIDGE_CFG_1 rHBridgeCfg1;
+	DSP_HBRIDGE_CFG_2 rHBridgeCfg2;
+	DSP_BUSMASTER_CFG_1 rBusmasterCfg1;
+	DSP_BUSMASTER_CFG_2 rBusmasterCfg2;
+	DSP_ISA_PROT_CFG rIsaProtCfg;
+	DSP_POWER_MGMT_CFG rPowerMgmtCfg;
+	DSP_HBUS_TIMER_CFG rHBusTimerCfg;
+	DSP_LBUS_TIMEOUT_DISABLE rLBusTimeoutDisable;
+	DSP_CHIP_RESET rChipReset;
+	DSP_CLOCK_CONTROL_1 rClockControl1;
+	DSP_CLOCK_CONTROL_2 rClockControl2;
+	DSP_ISA_SLAVE_CONTROL rSlaveControl;
+	DSP_HBRIDGE_CONTROL rHBridgeControl;
+	unsigned short ChipID = 0;
+	unsigned short tval;
+
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780I_EnableDSP entry pSettings->bDSPEnabled %x\n",
+		pSettings->bDSPEnabled);
+
+
+	if (!pSettings->bDSPEnabled) {
+		PRINTK_ERROR( KERN_ERR "3780i::dsp3780I_EnableDSP: Error: DSP not enabled. Aborting.\n" );
+		return -EIO;
+	}
+
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP entry pSettings->bModemEnabled %x\n",
+		pSettings->bModemEnabled);
+
+	if (pSettings->bModemEnabled) {
+		rUartCfg1.Reserved = rUartCfg2.Reserved = 0;
+		rUartCfg1.IrqActiveLow = pSettings->bUartIrqActiveLow;
+		rUartCfg1.IrqPulse = pSettings->bUartIrqPulse;
+		rUartCfg1.Irq =
+			(unsigned char) pIrqMap[pSettings->usUartIrq];
+		switch (pSettings->usUartBaseIO) {
+		case 0x03F8:
+			rUartCfg1.BaseIO = 0;
+			break;
+		case 0x02F8:
+			rUartCfg1.BaseIO = 1;
+			break;
+		case 0x03E8:
+			rUartCfg1.BaseIO = 2;
+			break;
+		case 0x02E8:
+			rUartCfg1.BaseIO = 3;
+			break;
+		}
+		rUartCfg2.Enable = TRUE;
+	}
+
+	rHBridgeCfg1.Reserved = rHBridgeCfg2.Reserved = 0;
+	rHBridgeCfg1.IrqActiveLow = pSettings->bDspIrqActiveLow;
+	rHBridgeCfg1.IrqPulse = pSettings->bDspIrqPulse;
+	rHBridgeCfg1.Irq = (unsigned char) pIrqMap[pSettings->usDspIrq];
+	rHBridgeCfg1.AccessMode = 1;
+	rHBridgeCfg2.Enable = TRUE;
+
+
+	rBusmasterCfg2.Reserved = 0;
+	rBusmasterCfg1.Dma = (unsigned char) pDmaMap[pSettings->usDspDma];
+	rBusmasterCfg1.NumTransfers =
+		(unsigned char) pSettings->usNumTransfers;
+	rBusmasterCfg1.ReRequest = (unsigned char) pSettings->usReRequest;
+	rBusmasterCfg1.MEMCS16 = pSettings->bEnableMEMCS16;
+	rBusmasterCfg2.IsaMemCmdWidth =
+		(unsigned char) pSettings->usIsaMemCmdWidth;
+
+
+	rIsaProtCfg.Reserved = 0;
+	rIsaProtCfg.GateIOCHRDY = pSettings->bGateIOCHRDY;
+
+	rPowerMgmtCfg.Reserved = 0;
+	rPowerMgmtCfg.Enable = pSettings->bEnablePwrMgmt;
+
+	rHBusTimerCfg.LoadValue =
+		(unsigned char) pSettings->usHBusTimerLoadValue;
+
+	rLBusTimeoutDisable.Reserved = 0;
+	rLBusTimeoutDisable.DisableTimeout =
+		pSettings->bDisableLBusTimeout;
+
+	MKWORD(rChipReset) = ~pSettings->usChipletEnable;
+
+	rClockControl1.Reserved1 = rClockControl1.Reserved2 = 0;
+	rClockControl1.N_Divisor = pSettings->usN_Divisor;
+	rClockControl1.M_Multiplier = pSettings->usM_Multiplier;
+
+	rClockControl2.Reserved = 0;
+	rClockControl2.PllBypass = pSettings->bPllBypass;
+
+	/* Issue a soft reset to the chip */
+	/* Note: Since we may be coming in with 3780i clocks suspended, we must keep
+	* soft-reset active for 10ms.
+	*/
+	rSlaveControl.ClockControl = 0;
+	rSlaveControl.SoftReset = TRUE;
+	rSlaveControl.ConfigMode = FALSE;
+	rSlaveControl.Reserved = 0;
+
+	PRINTK_4(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP usDspBaseIO %x index %x taddr %x\n",
+		usDspBaseIO, DSP_IsaSlaveControl,
+		usDspBaseIO + DSP_IsaSlaveControl);
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP rSlaveContrl %x\n",
+		MKWORD(rSlaveControl));
+
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
+	MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP rSlaveControl 2 %x\n", tval);
+
+
+	for (i = 0; i < 11; i++)
+		udelay(2000);
+
+	rSlaveControl.SoftReset = FALSE;
+	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
+
+	MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP rSlaveControl 3 %x\n", tval);
+
+
+	/* Program our general configuration registers */
+	WriteGenCfg(DSP_HBridgeCfg1Index, MKBYTE(rHBridgeCfg1));
+	WriteGenCfg(DSP_HBridgeCfg2Index, MKBYTE(rHBridgeCfg2));
+	WriteGenCfg(DSP_BusMasterCfg1Index, MKBYTE(rBusmasterCfg1));
+	WriteGenCfg(DSP_BusMasterCfg2Index, MKBYTE(rBusmasterCfg2));
+	WriteGenCfg(DSP_IsaProtCfgIndex, MKBYTE(rIsaProtCfg));
+	WriteGenCfg(DSP_PowerMgCfgIndex, MKBYTE(rPowerMgmtCfg));
+	WriteGenCfg(DSP_HBusTimerCfgIndex, MKBYTE(rHBusTimerCfg));
+
+	if (pSettings->bModemEnabled) {
+		WriteGenCfg(DSP_UartCfg1Index, MKBYTE(rUartCfg1));
+		WriteGenCfg(DSP_UartCfg2Index, MKBYTE(rUartCfg2));
+	}
+
+
+	rHBridgeControl.EnableDspInt = FALSE;
+	rHBridgeControl.MemAutoInc = TRUE;
+	rHBridgeControl.IoAutoInc = FALSE;
+	rHBridgeControl.DiagnosticMode = FALSE;
+
+	PRINTK_3(TRACE_3780I,
+		"3780i::dsp3780i_EnableDSP DSP_HBridgeControl %x rHBridgeControl %x\n",
+		DSP_HBridgeControl, MKWORD(rHBridgeControl));
+
+	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+	WriteMsaCfg(DSP_LBusTimeoutDisable, MKWORD(rLBusTimeoutDisable));
+	WriteMsaCfg(DSP_ClockControl_1, MKWORD(rClockControl1));
+	WriteMsaCfg(DSP_ClockControl_2, MKWORD(rClockControl2));
+	WriteMsaCfg(DSP_ChipReset, MKWORD(rChipReset));
+
+	ChipID = ReadMsaCfg(DSP_ChipID);
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780I_EnableDSP exiting bRC=TRUE, ChipID %x\n",
+		ChipID);
+
+	return 0;
+}
+
+int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings)
+{
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	DSP_ISA_SLAVE_CONTROL rSlaveControl;
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP entry\n");
+
+	rSlaveControl.ClockControl = 0;
+	rSlaveControl.SoftReset = TRUE;
+	rSlaveControl.ConfigMode = FALSE;
+	rSlaveControl.Reserved = 0;
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
+
+	udelay(5);
+
+	rSlaveControl.ClockControl = 1;
+	OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	udelay(5);
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP exit\n");
+
+	return 0;
+}
+
+int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings)
+{
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	DSP_BOOT_DOMAIN rBootDomain;
+	DSP_HBRIDGE_CONTROL rHBridgeControl;
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset entry\n");
+
+	spin_lock_irqsave(&dsp_lock, flags);
+	/* Mask DSP to PC interrupt */
+	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
+
+	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rHBridgeControl %x\n",
+		MKWORD(rHBridgeControl));
+
+	rHBridgeControl.EnableDspInt = FALSE;
+	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Reset the core via the boot domain register */
+	rBootDomain.ResetCore = TRUE;
+	rBootDomain.Halt = TRUE;
+	rBootDomain.NMI = TRUE;
+	rBootDomain.Reserved = 0;
+
+	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rBootDomain %x\n",
+		MKWORD(rBootDomain));
+
+	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
+
+	/* Reset all the chiplets and then reactivate them */
+	WriteMsaCfg(DSP_ChipReset, 0xFFFF);
+	udelay(5);
+	WriteMsaCfg(DSP_ChipReset,
+			(unsigned short) (~pSettings->usChipletEnable));
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset exit bRC=0\n");
+
+	return 0;
+}
+
+
+int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings)
+{
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	DSP_BOOT_DOMAIN rBootDomain;
+	DSP_HBRIDGE_CONTROL rHBridgeControl;
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run entry\n");
+
+
+	/* Transition the core to a running state */
+	rBootDomain.ResetCore = TRUE;
+	rBootDomain.Halt = FALSE;
+	rBootDomain.NMI = TRUE;
+	rBootDomain.Reserved = 0;
+	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
+
+	udelay(5);
+
+	rBootDomain.ResetCore = FALSE;
+	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
+	udelay(5);
+
+	rBootDomain.NMI = FALSE;
+	WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
+	udelay(5);
+
+	/* Enable DSP to PC interrupt */
+	spin_lock_irqsave(&dsp_lock, flags);
+	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
+	rHBridgeControl.EnableDspInt = TRUE;
+
+	PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Run rHBridgeControl %x\n",
+		MKWORD(rHBridgeControl));
+
+	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+
+	PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run exit bRC=TRUE\n");
+
+	return 0;
+}
+
+
+int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                        unsigned uCount, unsigned long ulDSPAddr)
+{
+	unsigned short __user *pusBuffer = pvBuffer;
+	unsigned short val;
+
+
+	PRINTK_5(TRACE_3780I,
+		"3780i::dsp3780I_ReadDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
+
+
+	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Transfer the memory block */
+	while (uCount-- != 0) {
+		spin_lock_irqsave(&dsp_lock, flags);
+		val = InWordDsp(DSP_MsaDataDSISHigh);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		if(put_user(val, pusBuffer++))
+			return -EFAULT;
+
+		PRINTK_3(TRACE_3780I,
+			"3780I::dsp3780I_ReadDStore uCount %x val %x\n",
+			uCount, val);
+
+		PaceMsaAccess(usDspBaseIO);
+	}
+
+
+	PRINTK_1(TRACE_3780I,
+		"3780I::dsp3780I_ReadDStore exit bRC=TRUE\n");
+
+	return 0;
+}
+
+int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO,
+                                void __user *pvBuffer, unsigned uCount,
+                                unsigned long ulDSPAddr)
+{
+	unsigned short __user *pusBuffer = pvBuffer;
+	unsigned short val;
+
+
+	PRINTK_5(TRACE_3780I,
+		"3780i::dsp3780I_ReadAndDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
+
+
+	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Transfer the memory block */
+	while (uCount-- != 0) {
+		spin_lock_irqsave(&dsp_lock, flags);
+		val = InWordDsp(DSP_ReadAndClear);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		if(put_user(val, pusBuffer++))
+			return -EFAULT;
+
+		PRINTK_3(TRACE_3780I,
+			"3780I::dsp3780I_ReadAndCleanDStore uCount %x val %x\n",
+			uCount, val);
+
+		PaceMsaAccess(usDspBaseIO);
+	}
+
+
+	PRINTK_1(TRACE_3780I,
+		"3780I::dsp3780I_ReadAndClearDStore exit bRC=TRUE\n");
+
+	return 0;
+}
+
+
+int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                         unsigned uCount, unsigned long ulDSPAddr)
+{
+	unsigned short __user *pusBuffer = pvBuffer;
+
+
+	PRINTK_5(TRACE_3780I,
+		"3780i::dsp3780D_WriteDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
+
+
+	/* Set the initial MSA address. No adjustments need to be made to data store addresses */
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Transfer the memory block */
+	while (uCount-- != 0) {
+		unsigned short val;
+		if(get_user(val, pusBuffer++))
+			return -EFAULT;
+		spin_lock_irqsave(&dsp_lock, flags);
+		OutWordDsp(DSP_MsaDataDSISHigh, val);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		PRINTK_3(TRACE_3780I,
+			"3780I::dsp3780I_WriteDStore uCount %x val %x\n",
+			uCount, val);
+
+		PaceMsaAccess(usDspBaseIO);
+	}
+
+
+	PRINTK_1(TRACE_3780I,
+		"3780I::dsp3780D_WriteDStore exit bRC=TRUE\n");
+
+	return 0;
+}
+
+
+int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                        unsigned uCount, unsigned long ulDSPAddr)
+{
+	unsigned short __user *pusBuffer = pvBuffer;
+
+	PRINTK_5(TRACE_3780I,
+		"3780i::dsp3780I_ReadIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
+
+	/*
+	* Set the initial MSA address. To convert from an instruction store
+	* address to an MSA address
+	* shift the address two bits to the left and set bit 22
+	*/
+	ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Transfer the memory block */
+	while (uCount-- != 0) {
+		unsigned short val_lo, val_hi;
+		spin_lock_irqsave(&dsp_lock, flags);
+		val_lo = InWordDsp(DSP_MsaDataISLow);
+		val_hi = InWordDsp(DSP_MsaDataDSISHigh);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		if(put_user(val_lo, pusBuffer++))
+			return -EFAULT;
+		if(put_user(val_hi, pusBuffer++))
+			return -EFAULT;
+
+		PRINTK_4(TRACE_3780I,
+			"3780I::dsp3780I_ReadIStore uCount %x val_lo %x val_hi %x\n",
+			uCount, val_lo, val_hi);
+
+		PaceMsaAccess(usDspBaseIO);
+
+	}
+
+	PRINTK_1(TRACE_3780I,
+		"3780I::dsp3780I_ReadIStore exit bRC=TRUE\n");
+
+	return 0;
+}
+
+
+int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                         unsigned uCount, unsigned long ulDSPAddr)
+{
+	unsigned short __user *pusBuffer = pvBuffer;
+
+	PRINTK_5(TRACE_3780I,
+		"3780i::dsp3780I_WriteIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		usDspBaseIO, pusBuffer, uCount, ulDSPAddr);
+
+
+	/*
+	* Set the initial MSA address. To convert from an instruction store
+	* address to an MSA address
+	* shift the address two bits to the left and set bit 22
+	*/
+	ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
+	spin_lock_irqsave(&dsp_lock, flags);
+	OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
+	OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	/* Transfer the memory block */
+	while (uCount-- != 0) {
+		unsigned short val_lo, val_hi;
+		if(get_user(val_lo, pusBuffer++))
+			return -EFAULT;
+		if(get_user(val_hi, pusBuffer++))
+			return -EFAULT;
+		spin_lock_irqsave(&dsp_lock, flags);
+		OutWordDsp(DSP_MsaDataISLow, val_lo);
+		OutWordDsp(DSP_MsaDataDSISHigh, val_hi);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		PRINTK_4(TRACE_3780I,
+			"3780I::dsp3780I_WriteIStore uCount %x val_lo %x val_hi %x\n",
+			uCount, val_lo, val_hi);
+
+		PaceMsaAccess(usDspBaseIO);
+
+	}
+
+	PRINTK_1(TRACE_3780I,
+		"3780I::dsp3780I_WriteIStore exit bRC=TRUE\n");
+
+	return 0;
+}
+
+
+int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
+                          unsigned short *pusIPCSource)
+{
+	DSP_HBRIDGE_CONTROL rHBridgeControl;
+	unsigned short temp;
+
+
+	PRINTK_3(TRACE_3780I,
+		"3780i::dsp3780I_GetIPCSource entry usDspBaseIO %x pusIPCSource %p\n",
+		usDspBaseIO, pusIPCSource);
+
+	/*
+	* Disable DSP to PC interrupts, read the interrupt register,
+	* clear the pending IPC bits, and reenable DSP to PC interrupts
+	*/
+	spin_lock_irqsave(&dsp_lock, flags);
+	MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
+	rHBridgeControl.EnableDspInt = FALSE;
+	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
+
+	*pusIPCSource = InWordDsp(DSP_Interrupt);
+	temp = (unsigned short) ~(*pusIPCSource);
+
+	PRINTK_3(TRACE_3780I,
+		"3780i::dsp3780I_GetIPCSource, usIPCSource %x ~ %x\n",
+		*pusIPCSource, temp);
+
+	OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource));
+
+	rHBridgeControl.EnableDspInt = TRUE;
+	OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+
+	PRINTK_2(TRACE_3780I,
+		"3780i::dsp3780I_GetIPCSource exit usIPCSource %x\n",
+		*pusIPCSource);
+
+	return 0;
+}
diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
new file mode 100644
index 0000000..3e7d020
--- /dev/null
+++ b/drivers/char/mwave/3780i.h
@@ -0,0 +1,362 @@
+/*
+*
+* 3780i.h -- declarations for 3780i.c
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#ifndef _LINUX_3780I_H
+#define _LINUX_3780I_H
+
+#include <asm/io.h>
+
+/* DSP I/O port offsets and definitions */
+#define DSP_IsaSlaveControl        0x0000	/* ISA slave control register */
+#define DSP_IsaSlaveStatus         0x0001	/* ISA slave status register */
+#define DSP_ConfigAddress          0x0002	/* General config address register */
+#define DSP_ConfigData             0x0003	/* General config data register */
+#define DSP_HBridgeControl         0x0002	/* HBridge control register */
+#define DSP_MsaAddrLow             0x0004	/* MSP System Address, low word */
+#define DSP_MsaAddrHigh            0x0006	/* MSP System Address, high word */
+#define DSP_MsaDataDSISHigh        0x0008	/* MSA data register: d-store word or high byte of i-store */
+#define DSP_MsaDataISLow           0x000A	/* MSA data register: low word of i-store */
+#define DSP_ReadAndClear           0x000C	/* MSA read and clear data register */
+#define DSP_Interrupt              0x000E	/* Interrupt register (IPC source) */
+
+typedef struct {
+	unsigned char ClockControl:1;	/* RW: Clock control: 0=normal, 1=stop 3780i clocks */
+	unsigned char SoftReset:1;	/* RW: Soft reset 0=normal, 1=soft reset active */
+	unsigned char ConfigMode:1;	/* RW: Configuration mode, 0=normal, 1=config mode */
+	unsigned char Reserved:5;	/* 0: Reserved */
+} DSP_ISA_SLAVE_CONTROL;
+
+
+typedef struct {
+	unsigned short EnableDspInt:1;	/* RW: Enable DSP to X86 ISA interrupt 0=mask it, 1=enable it */
+	unsigned short MemAutoInc:1;	/* RW: Memory address auto increment, 0=disable, 1=enable */
+	unsigned short IoAutoInc:1;	/* RW: I/O address auto increment, 0=disable, 1=enable */
+	unsigned short DiagnosticMode:1;	/* RW: Disgnostic mode 0=nromal, 1=diagnostic mode */
+	unsigned short IsaPacingTimer:12;	/* R: ISA access pacing timer: count of core cycles stolen */
+} DSP_HBRIDGE_CONTROL;
+
+
+/* DSP register indexes used with the configuration register address (index) register */
+#define DSP_UartCfg1Index          0x0003	/* UART config register 1 */
+#define DSP_UartCfg2Index          0x0004	/* UART config register 2 */
+#define DSP_HBridgeCfg1Index       0x0007	/* HBridge config register 1 */
+#define DSP_HBridgeCfg2Index       0x0008	/* HBridge config register 2 */
+#define DSP_BusMasterCfg1Index     0x0009	/* ISA bus master config register 1 */
+#define DSP_BusMasterCfg2Index     0x000A	/* ISA bus master config register 2 */
+#define DSP_IsaProtCfgIndex        0x000F	/* ISA protocol control register */
+#define DSP_PowerMgCfgIndex        0x0010	/* Low poser suspend/resume enable */
+#define DSP_HBusTimerCfgIndex      0x0011	/* HBUS timer load value */
+
+typedef struct {
+	unsigned char IrqActiveLow:1;	/* RW: IRQ active high or low: 0=high, 1=low */
+	unsigned char IrqPulse:1;	/* RW: IRQ pulse or level: 0=level, 1=pulse  */
+	unsigned char Irq:3;	/* RW: IRQ selection */
+	unsigned char BaseIO:2;	/* RW: Base I/O selection */
+	unsigned char Reserved:1;	/* 0: Reserved */
+} DSP_UART_CFG_1;
+
+typedef struct {
+	unsigned char Enable:1;	/* RW: Enable I/O and IRQ: 0=FALSE, 1=TRUE */
+	unsigned char Reserved:7;	/* 0: Reserved */
+} DSP_UART_CFG_2;
+
+typedef struct {
+	unsigned char IrqActiveLow:1;	/* RW: IRQ active high=0 or low=1 */
+	unsigned char IrqPulse:1;	/* RW: IRQ pulse=1 or level=0 */
+	unsigned char Irq:3;	/* RW: IRQ selection */
+	unsigned char AccessMode:1;	/* RW: 16-bit register access method 0=byte, 1=word */
+	unsigned char Reserved:2;	/* 0: Reserved */
+} DSP_HBRIDGE_CFG_1;
+
+typedef struct {
+	unsigned char Enable:1;	/* RW: enable I/O and IRQ: 0=FALSE, 1=TRUE */
+	unsigned char Reserved:7;	/* 0: Reserved */
+} DSP_HBRIDGE_CFG_2;
+
+
+typedef struct {
+	unsigned char Dma:3;	/* RW: DMA channel selection */
+	unsigned char NumTransfers:2;	/* RW: Maximum # of transfers once being granted the ISA bus */
+	unsigned char ReRequest:2;	/* RW: Minumum delay between releasing the ISA bus and requesting it again */
+	unsigned char MEMCS16:1;	/* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */
+} DSP_BUSMASTER_CFG_1;
+
+typedef struct {
+	unsigned char IsaMemCmdWidth:2;	/* RW: ISA memory command width */
+	unsigned char Reserved:6;	/* 0: Reserved */
+} DSP_BUSMASTER_CFG_2;
+
+
+typedef struct {
+	unsigned char GateIOCHRDY:1;	/* RW: Enable IOCHRDY gating: 0=FALSE, 1=TRUE */
+	unsigned char Reserved:7;	/* 0: Reserved */
+} DSP_ISA_PROT_CFG;
+
+typedef struct {
+	unsigned char Enable:1;	/* RW: Enable low power suspend/resume 0=FALSE, 1=TRUE */
+	unsigned char Reserved:7;	/* 0: Reserved */
+} DSP_POWER_MGMT_CFG;
+
+typedef struct {
+	unsigned char LoadValue:8;	/* RW: HBUS timer load value */
+} DSP_HBUS_TIMER_CFG;
+
+
+
+/* DSP registers that exist in MSA I/O space */
+#define DSP_ChipID                 0x80000000
+#define DSP_MspBootDomain          0x80000580
+#define DSP_LBusTimeoutDisable     0x80000580
+#define DSP_ClockControl_1         0x8000058A
+#define DSP_ClockControl_2         0x8000058C
+#define DSP_ChipReset              0x80000588
+#define DSP_GpioModeControl_15_8   0x80000082
+#define DSP_GpioDriverEnable_15_8  0x80000076
+#define DSP_GpioOutputData_15_8    0x80000072
+
+typedef struct {
+	unsigned short NMI:1;	/* RW: non maskable interrupt */
+	unsigned short Halt:1;	/* RW: Halt MSP clock */
+	unsigned short ResetCore:1;	/* RW: Reset MSP core interface */
+	unsigned short Reserved:13;	/* 0: Reserved */
+} DSP_BOOT_DOMAIN;
+
+typedef struct {
+	unsigned short DisableTimeout:1;	/* RW: Disable LBus timeout */
+	unsigned short Reserved:15;	/* 0: Reserved */
+} DSP_LBUS_TIMEOUT_DISABLE;
+
+typedef struct {
+	unsigned short Memory:1;	/* RW: Reset memory interface */
+	unsigned short SerialPort1:1;	/* RW: Reset serial port 1 interface */
+	unsigned short SerialPort2:1;	/* RW: Reset serial port 2 interface */
+	unsigned short SerialPort3:1;	/* RW: Reset serial port 3 interface */
+	unsigned short Gpio:1;	/* RW: Reset GPIO interface */
+	unsigned short Dma:1;	/* RW: Reset DMA interface */
+	unsigned short SoundBlaster:1;	/* RW: Reset soundblaster interface */
+	unsigned short Uart:1;	/* RW: Reset UART interface */
+	unsigned short Midi:1;	/* RW: Reset MIDI interface */
+	unsigned short IsaMaster:1;	/* RW: Reset ISA master interface */
+	unsigned short Reserved:6;	/* 0: Reserved */
+} DSP_CHIP_RESET;
+
+typedef struct {
+	unsigned short N_Divisor:6;	/* RW: (N) PLL output clock divisor */
+	unsigned short Reserved1:2;	/* 0: reserved */
+	unsigned short M_Multiplier:6;	/* RW: (M) PLL feedback clock multiplier */
+	unsigned short Reserved2:2;	/* 0: reserved */
+} DSP_CLOCK_CONTROL_1;
+
+typedef struct {
+	unsigned short PllBypass:1;	/* RW: PLL Bypass */
+	unsigned short Reserved:15;	/* 0: Reserved */
+} DSP_CLOCK_CONTROL_2;
+
+typedef struct {
+	unsigned short Latch8:1;
+	unsigned short Latch9:1;
+	unsigned short Latch10:1;
+	unsigned short Latch11:1;
+	unsigned short Latch12:1;
+	unsigned short Latch13:1;
+	unsigned short Latch14:1;
+	unsigned short Latch15:1;
+	unsigned short Mask8:1;
+	unsigned short Mask9:1;
+	unsigned short Mask10:1;
+	unsigned short Mask11:1;
+	unsigned short Mask12:1;
+	unsigned short Mask13:1;
+	unsigned short Mask14:1;
+	unsigned short Mask15:1;
+} DSP_GPIO_OUTPUT_DATA_15_8;
+
+typedef struct {
+	unsigned short Enable8:1;
+	unsigned short Enable9:1;
+	unsigned short Enable10:1;
+	unsigned short Enable11:1;
+	unsigned short Enable12:1;
+	unsigned short Enable13:1;
+	unsigned short Enable14:1;
+	unsigned short Enable15:1;
+	unsigned short Mask8:1;
+	unsigned short Mask9:1;
+	unsigned short Mask10:1;
+	unsigned short Mask11:1;
+	unsigned short Mask12:1;
+	unsigned short Mask13:1;
+	unsigned short Mask14:1;
+	unsigned short Mask15:1;
+} DSP_GPIO_DRIVER_ENABLE_15_8;
+
+typedef struct {
+	unsigned short GpioMode8:2;
+	unsigned short GpioMode9:2;
+	unsigned short GpioMode10:2;
+	unsigned short GpioMode11:2;
+	unsigned short GpioMode12:2;
+	unsigned short GpioMode13:2;
+	unsigned short GpioMode14:2;
+	unsigned short GpioMode15:2;
+} DSP_GPIO_MODE_15_8;
+
+/* Component masks that are defined in dspmgr.h */
+#define MW_ADC_MASK    0x0001
+#define MW_AIC2_MASK   0x0006
+#define MW_MIDI_MASK   0x0008
+#define MW_CDDAC_MASK  0x8001
+#define MW_AIC1_MASK   0xE006
+#define MW_UART_MASK   0xE00A
+#define MW_ACI_MASK    0xE00B
+
+/*
+* Definition of 3780i configuration structure.  Unless otherwise stated,
+* these values are provided as input to the 3780i support layer.  At present,
+* the only values maintained by the 3780i support layer are the saved UART
+* registers.
+*/
+typedef struct _DSP_3780I_CONFIG_SETTINGS {
+
+	/* Location of base configuration register */
+	unsigned short usBaseConfigIO;
+
+	/* Enables for various DSP components */
+	int bDSPEnabled;
+	int bModemEnabled;
+	int bInterruptClaimed;
+
+	/* IRQ, DMA, and Base I/O addresses for various DSP components */
+	unsigned short usDspIrq;
+	unsigned short usDspDma;
+	unsigned short usDspBaseIO;
+	unsigned short usUartIrq;
+	unsigned short usUartBaseIO;
+
+	/* IRQ modes for various DSP components */
+	int bDspIrqActiveLow;
+	int bUartIrqActiveLow;
+	int bDspIrqPulse;
+	int bUartIrqPulse;
+
+	/* Card abilities */
+	unsigned uIps;
+	unsigned uDStoreSize;
+	unsigned uIStoreSize;
+	unsigned uDmaBandwidth;
+
+	/* Adapter specific 3780i settings */
+	unsigned short usNumTransfers;
+	unsigned short usReRequest;
+	int bEnableMEMCS16;
+	unsigned short usIsaMemCmdWidth;
+	int bGateIOCHRDY;
+	int bEnablePwrMgmt;
+	unsigned short usHBusTimerLoadValue;
+	int bDisableLBusTimeout;
+	unsigned short usN_Divisor;
+	unsigned short usM_Multiplier;
+	int bPllBypass;
+	unsigned short usChipletEnable;	/* Used with the chip reset register to enable specific chiplets */
+
+	/* Saved UART registers. These are maintained by the 3780i support layer. */
+	int bUartSaved;		/* True after a successful save of the UART registers */
+	unsigned char ucIER;	/* Interrupt enable register */
+	unsigned char ucFCR;	/* FIFO control register */
+	unsigned char ucLCR;	/* Line control register */
+	unsigned char ucMCR;	/* Modem control register */
+	unsigned char ucSCR;	/* Scratch register */
+	unsigned char ucDLL;	/* Divisor latch, low byte */
+	unsigned char ucDLM;	/* Divisor latch, high byte */
+} DSP_3780I_CONFIG_SETTINGS;
+
+
+/* 3780i support functions */
+int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings,
+                       unsigned short *pIrqMap,
+                       unsigned short *pDmaMap);
+int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings);
+int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings);
+int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings);
+int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                        unsigned uCount, unsigned long ulDSPAddr);
+int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO,
+                                void __user *pvBuffer, unsigned uCount,
+                                unsigned long ulDSPAddr);
+int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                         unsigned uCount, unsigned long ulDSPAddr);
+int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                        unsigned uCount, unsigned long ulDSPAddr);
+int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
+                         unsigned uCount, unsigned long ulDSPAddr);
+unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
+                                   unsigned long ulMsaAddr);
+void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO,
+                          unsigned long ulMsaAddr, unsigned short usValue);
+void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex,
+                          unsigned char ucValue);
+unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO,
+                                  unsigned uIndex);
+int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
+                          unsigned short *pusIPCSource);
+
+/* I/O port access macros */
+#define MKWORD(var) (*((unsigned short *)(&var)))
+#define MKBYTE(var) (*((unsigned char *)(&var)))
+
+#define WriteMsaCfg(addr,value) dsp3780I_WriteMsaCfg(usDspBaseIO,addr,value)
+#define ReadMsaCfg(addr) dsp3780I_ReadMsaCfg(usDspBaseIO,addr)
+#define WriteGenCfg(index,value) dsp3780I_WriteGenCfg(usDspBaseIO,index,value)
+#define ReadGenCfg(index) dsp3780I_ReadGenCfg(usDspBaseIO,index)
+
+#define InWordDsp(index)          inw(usDspBaseIO+index)
+#define InByteDsp(index)          inb(usDspBaseIO+index)
+#define OutWordDsp(index,value)   outw(value,usDspBaseIO+index)
+#define OutByteDsp(index,value)   outb(value,usDspBaseIO+index)
+
+#endif
diff --git a/drivers/char/mwave/Makefile b/drivers/char/mwave/Makefile
new file mode 100644
index 0000000..754c9e2
--- /dev/null
+++ b/drivers/char/mwave/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for ACP Modem (Mwave).
+#
+# See the README file in this directory for more info. <paulsch@us.ibm.com>
+#
+
+obj-$(CONFIG_MWAVE) += mwave.o
+
+mwave-objs := mwavedd.o smapi.o tp3780i.o 3780i.o
+
+# To have the mwave driver disable other uarts if necessary
+# EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES
+
+# To compile in lots (~20 KiB) of run-time enablable printk()s for debugging:
+EXTRA_CFLAGS += -DMW_TRACE
diff --git a/drivers/char/mwave/README b/drivers/char/mwave/README
new file mode 100644
index 0000000..70f8d19
--- /dev/null
+++ b/drivers/char/mwave/README
@@ -0,0 +1,50 @@
+Module options
+--------------
+
+The mwave module takes the following options.  Note that these options
+are not saved by the BIOS and so do not persist after unload and reload.
+
+  mwave_debug=value, where value is bitwise OR of trace flags:
+	0x0001 mwavedd api tracing
+	0x0002 smapi api tracing
+	0x0004 3780i tracing
+	0x0008 tp3780i tracing
+
+        Tracing only occurs if the driver has been compiled with the
+        MW_TRACE macro #defined  (i.e. let EXTRA_CFLAGS += -DMW_TRACE
+        in the Makefile).
+
+  mwave_3780i_irq=5/7/10/11/15
+	If the dsp irq has not been setup and stored in bios by the 
+	thinkpad configuration utility then this parameter allows the
+	irq used by the dsp to be configured.
+
+  mwave_3780i_io=0x130/0x350/0x0070/0xDB0
+	If the dsp io range has not been setup and stored in bios by the 
+	thinkpad configuration utility then this parameter allows the
+	io range used by the dsp to be configured.
+
+  mwave_uart_irq=3/4
+	If the mwave's uart irq has not been setup and stored in bios by the 
+	thinkpad configuration utility then this parameter allows the
+	irq used by the mwave uart to be configured.
+
+  mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
+	If the uart io range has not been setup and stored in bios by the 
+	thinkpad configuration utility then this parameter allows the
+	io range used by the mwave uart to be configured.
+
+Example to enable the 3780i DSP using ttyS1 resources:
+	
+  insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
+
+Accessing the driver
+--------------------
+
+You must also create a node for the driver.  Without devfs:
+  mkdir -p /dev/modems
+  mknod --mode=660 /dev/modems/mwave c 10 219
+With devfs:
+  mkdir -p /dev/modems
+  ln -s ../misc/mwave /dev/modems/mwave
+
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
new file mode 100644
index 0000000..d37625d
--- /dev/null
+++ b/drivers/char/mwave/mwavedd.c
@@ -0,0 +1,674 @@
+/*
+*
+* mwavedd.c -- mwave device driver
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/miscdevice.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include "smapi.h"
+#include "mwavedd.h"
+#include "3780i.h"
+#include "tp3780i.h"
+
+MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
+MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
+MODULE_LICENSE("GPL");
+
+/*
+* These parameters support the setting of MWave resources. Note that no
+* checks are made against other devices (ie. superio) for conflicts.
+* We'll depend on users using the tpctl utility to do that for now
+*/
+int mwave_debug = 0;
+int mwave_3780i_irq = 0;
+int mwave_3780i_io = 0;
+int mwave_uart_irq = 0;
+int mwave_uart_io = 0;
+module_param(mwave_debug, int, 0);
+module_param(mwave_3780i_irq, int, 0);
+module_param(mwave_3780i_io, int, 0);
+module_param(mwave_uart_irq, int, 0);
+module_param(mwave_uart_io, int, 0);
+
+static int mwave_open(struct inode *inode, struct file *file);
+static int mwave_close(struct inode *inode, struct file *file);
+static int mwave_ioctl(struct inode *inode, struct file *filp,
+                       unsigned int iocmd, unsigned long ioarg);
+
+MWAVE_DEVICE_DATA mwave_s_mdd;
+
+static int mwave_open(struct inode *inode, struct file *file)
+{
+	unsigned int retval = 0;
+
+	PRINTK_3(TRACE_MWAVE,
+		"mwavedd::mwave_open, entry inode %p file %p\n",
+		 inode, file);
+	PRINTK_2(TRACE_MWAVE,
+		"mwavedd::mwave_open, exit return retval %x\n", retval);
+
+	return retval;
+}
+
+static int mwave_close(struct inode *inode, struct file *file)
+{
+	unsigned int retval = 0;
+
+	PRINTK_3(TRACE_MWAVE,
+		"mwavedd::mwave_close, entry inode %p file %p\n",
+		 inode,  file);
+
+	PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n",
+		retval);
+
+	return retval;
+}
+
+static int mwave_ioctl(struct inode *inode, struct file *file,
+                       unsigned int iocmd, unsigned long ioarg)
+{
+	unsigned int retval = 0;
+	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
+	void __user *arg = (void __user *)ioarg;
+
+	PRINTK_5(TRACE_MWAVE,
+		"mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n",
+		 inode,  file, iocmd, (int) ioarg);
+
+	switch (iocmd) {
+
+		case IOCTL_MW_RESET:
+			PRINTK_1(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
+				" calling tp3780I_ResetDSP\n");
+			retval = tp3780I_ResetDSP(&pDrvData->rBDData);
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
+				" retval %x from tp3780I_ResetDSP\n",
+				retval);
+			break;
+	
+		case IOCTL_MW_RUN:
+			PRINTK_1(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
+				" calling tp3780I_StartDSP\n");
+			retval = tp3780I_StartDSP(&pDrvData->rBDData);
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
+				" retval %x from tp3780I_StartDSP\n",
+				retval);
+			break;
+	
+		case IOCTL_MW_DSP_ABILITIES: {
+			MW_ABILITIES rAbilities;
+	
+			PRINTK_1(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl,"
+				" IOCTL_MW_DSP_ABILITIES calling"
+				" tp3780I_QueryAbilities\n");
+			retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
+					&rAbilities);
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
+				" retval %x from tp3780I_QueryAbilities\n",
+				retval);
+			if (retval == 0) {
+				if( copy_to_user(arg, &rAbilities,
+							sizeof(MW_ABILITIES)) )
+					return -EFAULT;
+			}
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
+				" exit retval %x\n",
+				retval);
+		}
+			break;
+	
+		case IOCTL_MW_READ_DATA:
+		case IOCTL_MW_READCLEAR_DATA: {
+			MW_READWRITE rReadData;
+			unsigned short __user *pusBuffer = NULL;
+	
+			if( copy_from_user(&rReadData, arg,
+						sizeof(MW_READWRITE)) )
+				return -EFAULT;
+			pusBuffer = (unsigned short __user *) (rReadData.pBuf);
+	
+			PRINTK_4(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
+				" size %lx, ioarg %lx pusBuffer %p\n",
+				rReadData.ulDataLength, ioarg, pusBuffer);
+			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
+					iocmd,
+					pusBuffer,
+					rReadData.ulDataLength,
+					rReadData.usDspAddress);
+		}
+			break;
+	
+		case IOCTL_MW_READ_INST: {
+			MW_READWRITE rReadData;
+			unsigned short __user *pusBuffer = NULL;
+	
+			if( copy_from_user(&rReadData, arg,
+						sizeof(MW_READWRITE)) )
+				return -EFAULT;
+			pusBuffer = (unsigned short __user *) (rReadData.pBuf);
+	
+			PRINTK_4(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_READ_INST,"
+				" size %lx, ioarg %lx pusBuffer %p\n",
+				rReadData.ulDataLength / 2, ioarg,
+				pusBuffer);
+			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
+				iocmd, pusBuffer,
+				rReadData.ulDataLength / 2,
+				rReadData.usDspAddress);
+		}
+			break;
+	
+		case IOCTL_MW_WRITE_DATA: {
+			MW_READWRITE rWriteData;
+			unsigned short __user *pusBuffer = NULL;
+	
+			if( copy_from_user(&rWriteData, arg,
+						sizeof(MW_READWRITE)) )
+				return -EFAULT;
+			pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
+	
+			PRINTK_4(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA,"
+				" size %lx, ioarg %lx pusBuffer %p\n",
+				rWriteData.ulDataLength, ioarg,
+				pusBuffer);
+			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
+					iocmd, pusBuffer,
+					rWriteData.ulDataLength,
+					rWriteData.usDspAddress);
+		}
+			break;
+	
+		case IOCTL_MW_WRITE_INST: {
+			MW_READWRITE rWriteData;
+			unsigned short __user *pusBuffer = NULL;
+	
+			if( copy_from_user(&rWriteData, arg,
+						sizeof(MW_READWRITE)) )
+				return -EFAULT;
+			pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
+	
+			PRINTK_4(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST,"
+				" size %lx, ioarg %lx pusBuffer %p\n",
+				rWriteData.ulDataLength, ioarg,
+				pusBuffer);
+			retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
+					iocmd, pusBuffer,
+					rWriteData.ulDataLength,
+					rWriteData.usDspAddress);
+		}
+			break;
+	
+		case IOCTL_MW_REGISTER_IPC: {
+			unsigned int ipcnum = (unsigned int) ioarg;
+	
+			PRINTK_3(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
+				" ipcnum %x entry usIntCount %x\n",
+				ipcnum,
+				pDrvData->IPCs[ipcnum].usIntCount);
+	
+			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+				PRINTK_ERROR(KERN_ERR_MWAVE
+						"mwavedd::mwave_ioctl:"
+						" IOCTL_MW_REGISTER_IPC:"
+						" Error: Invalid ipcnum %x\n",
+						ipcnum);
+				return -EINVAL;
+			}
+			pDrvData->IPCs[ipcnum].bIsHere = FALSE;
+			pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
+	
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
+				" ipcnum %x exit\n",
+				ipcnum);
+		}
+			break;
+	
+		case IOCTL_MW_GET_IPC: {
+			unsigned int ipcnum = (unsigned int) ioarg;
+	
+			PRINTK_3(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
+				" ipcnum %x, usIntCount %x\n",
+				ipcnum,
+				pDrvData->IPCs[ipcnum].usIntCount);
+			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+				PRINTK_ERROR(KERN_ERR_MWAVE
+						"mwavedd::mwave_ioctl:"
+						" IOCTL_MW_GET_IPC: Error:"
+						" Invalid ipcnum %x\n", ipcnum);
+				return -EINVAL;
+			}
+	
+			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
+				DECLARE_WAITQUEUE(wait, current);
+
+				PRINTK_2(TRACE_MWAVE,
+					"mwavedd::mwave_ioctl, thread for"
+					" ipc %x going to sleep\n",
+					ipcnum);
+				add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
+				pDrvData->IPCs[ipcnum].bIsHere = TRUE;
+				set_current_state(TASK_INTERRUPTIBLE);
+				/* check whether an event was signalled by */
+				/* the interrupt handler while we were gone */
+				if (pDrvData->IPCs[ipcnum].usIntCount == 1) {	/* first int has occurred (race condition) */
+					pDrvData->IPCs[ipcnum].usIntCount = 2;	/* first int has been handled */
+					PRINTK_2(TRACE_MWAVE,
+						"mwavedd::mwave_ioctl"
+						" IOCTL_MW_GET_IPC ipcnum %x"
+						" handling first int\n",
+						ipcnum);
+				} else {	/* either 1st int has not yet occurred, or we have already handled the first int */
+					schedule();
+					if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
+						pDrvData->IPCs[ipcnum].usIntCount = 2;
+					}
+					PRINTK_2(TRACE_MWAVE,
+						"mwavedd::mwave_ioctl"
+						" IOCTL_MW_GET_IPC ipcnum %x"
+						" woke up and returning to"
+						" application\n",
+						ipcnum);
+				}
+				pDrvData->IPCs[ipcnum].bIsHere = FALSE;
+				remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
+				set_current_state(TASK_RUNNING);
+				PRINTK_2(TRACE_MWAVE,
+					"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC,"
+					" returning thread for ipc %x"
+					" processing\n",
+					ipcnum);
+			}
+		}
+			break;
+	
+		case IOCTL_MW_UNREGISTER_IPC: {
+			unsigned int ipcnum = (unsigned int) ioarg;
+	
+			PRINTK_2(TRACE_MWAVE,
+				"mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC"
+				" ipcnum %x\n",
+				ipcnum);
+			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+				PRINTK_ERROR(KERN_ERR_MWAVE
+						"mwavedd::mwave_ioctl:"
+						" IOCTL_MW_UNREGISTER_IPC:"
+						" Error: Invalid ipcnum %x\n",
+						ipcnum);
+				return -EINVAL;
+			}
+			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
+				pDrvData->IPCs[ipcnum].bIsEnabled = FALSE;
+				if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) {
+					wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
+				}
+			}
+		}
+			break;
+	
+		default:
+			PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:"
+					" Error: Unrecognized iocmd %x\n",
+					iocmd);
+			return -ENOTTY;
+			break;
+	} /* switch */
+
+	PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+static ssize_t mwave_read(struct file *file, char __user *buf, size_t count,
+                          loff_t * ppos)
+{
+	PRINTK_5(TRACE_MWAVE,
+		"mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n",
+		file, buf, count, ppos);
+
+	return -EINVAL;
+}
+
+
+static ssize_t mwave_write(struct file *file, const char __user *buf,
+                           size_t count, loff_t * ppos)
+{
+	PRINTK_5(TRACE_MWAVE,
+		"mwavedd::mwave_write entry file %p, buf %p,"
+		" count %zx ppos %p\n",
+		file, buf, count, ppos);
+
+	return -EINVAL;
+}
+
+
+static int register_serial_portandirq(unsigned int port, int irq)
+{
+	struct serial_struct serial;
+
+	switch ( port ) {
+		case 0x3f8:
+		case 0x2f8:
+		case 0x3e8:
+		case 0x2e8:
+			/* OK */
+			break;
+		default:
+			PRINTK_ERROR(KERN_ERR_MWAVE
+					"mwavedd::register_serial_portandirq:"
+					" Error: Illegal port %x\n", port );
+			return -1;
+	} /* switch */
+	/* port is okay */
+
+	switch ( irq ) {
+		case 3:
+		case 4:
+		case 5:
+		case 7:
+			/* OK */
+			break;
+		default:
+			PRINTK_ERROR(KERN_ERR_MWAVE
+					"mwavedd::register_serial_portandirq:"
+					" Error: Illegal irq %x\n", irq );
+			return -1;
+	} /* switch */
+	/* irq is okay */
+
+	memset(&serial, 0, sizeof(serial));
+	serial.port = port;
+	serial.irq = irq;
+	serial.flags = ASYNC_SHARE_IRQ;
+
+	return register_serial(&serial);
+}
+
+
+static struct file_operations mwave_fops = {
+	.owner		= THIS_MODULE,
+	.read		= mwave_read,
+	.write		= mwave_write,
+	.ioctl		= mwave_ioctl,
+	.open		= mwave_open,
+	.release	= mwave_close
+};
+
+
+static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
+
+#if 0 /* totally b0rked */
+/*
+ * sysfs support <paulsch@us.ibm.com>
+ */
+
+struct device mwave_device;
+
+/* Prevent code redundancy, create a macro for mwave_show_* functions. */
+#define mwave_show_function(attr_name, format_string, field)		\
+static ssize_t mwave_show_##attr_name(struct device *dev, char *buf)	\
+{									\
+	DSP_3780I_CONFIG_SETTINGS *pSettings =				\
+		&mwave_s_mdd.rBDData.rDspSettings;			\
+        return sprintf(buf, format_string, pSettings->field);		\
+}
+
+/* All of our attributes are read attributes. */
+#define mwave_dev_rd_attr(attr_name, format_string, field)		\
+	mwave_show_function(attr_name, format_string, field)		\
+static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL)
+
+mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma);
+mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq);
+mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO);
+mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq);
+mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO);
+
+static struct device_attribute * const mwave_dev_attrs[] = {
+	&dev_attr_3780i_dma,
+	&dev_attr_3780i_irq,
+	&dev_attr_3780i_io,
+	&dev_attr_uart_irq,
+	&dev_attr_uart_io,
+};
+#endif
+
+/*
+* mwave_init is called on module load
+*
+* mwave_exit is called on module unload
+* mwave_exit is also used to clean up after an aborted mwave_init
+*/
+static void mwave_exit(void)
+{
+	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
+
+	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n");
+
+#if 0
+	for (i = 0; i < pDrvData->nr_registered_attrs; i++)
+		device_remove_file(&mwave_device, mwave_dev_attrs[i]);
+	pDrvData->nr_registered_attrs = 0;
+
+	if (pDrvData->device_registered) {
+		device_unregister(&mwave_device);
+		pDrvData->device_registered = FALSE;
+	}
+#endif
+
+	if ( pDrvData->sLine >= 0 ) {
+		unregister_serial(pDrvData->sLine);
+	}
+	if (pDrvData->bMwaveDevRegistered) {
+		misc_deregister(&mwave_misc_dev);
+	}
+	if (pDrvData->bDSPEnabled) {
+		tp3780I_DisableDSP(&pDrvData->rBDData);
+	}
+	if (pDrvData->bResourcesClaimed) {
+		tp3780I_ReleaseResources(&pDrvData->rBDData);
+	}
+	if (pDrvData->bBDInitialized) {
+		tp3780I_Cleanup(&pDrvData->rBDData);
+	}
+
+	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n");
+}
+
+module_exit(mwave_exit);
+
+static int __init mwave_init(void)
+{
+	int i;
+	int retval = 0;
+	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
+
+	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");
+
+	memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));
+
+	pDrvData->bBDInitialized = FALSE;
+	pDrvData->bResourcesClaimed = FALSE;
+	pDrvData->bDSPEnabled = FALSE;
+	pDrvData->bDSPReset = FALSE;
+	pDrvData->bMwaveDevRegistered = FALSE;
+	pDrvData->sLine = -1;
+
+	for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
+		pDrvData->IPCs[i].bIsEnabled = FALSE;
+		pDrvData->IPCs[i].bIsHere = FALSE;
+		pDrvData->IPCs[i].usIntCount = 0;	/* no ints received yet */
+		init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
+	}
+
+	retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
+	PRINTK_2(TRACE_MWAVE,
+		"mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
+		" retval %x\n",
+		retval);
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd::mwave_init: Error:"
+				" Failed to initialize board data\n");
+		goto cleanup_error;
+	}
+	pDrvData->bBDInitialized = TRUE;
+
+	retval = tp3780I_CalcResources(&pDrvData->rBDData);
+	PRINTK_2(TRACE_MWAVE,
+		"mwavedd::mwave_init, return from tp3780I_CalcResources"
+		" retval %x\n",
+		retval);
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd:mwave_init: Error:"
+				" Failed to calculate resources\n");
+		goto cleanup_error;
+	}
+
+	retval = tp3780I_ClaimResources(&pDrvData->rBDData);
+	PRINTK_2(TRACE_MWAVE,
+		"mwavedd::mwave_init, return from tp3780I_ClaimResources"
+		" retval %x\n",
+		retval);
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd:mwave_init: Error:"
+				" Failed to claim resources\n");
+		goto cleanup_error;
+	}
+	pDrvData->bResourcesClaimed = TRUE;
+
+	retval = tp3780I_EnableDSP(&pDrvData->rBDData);
+	PRINTK_2(TRACE_MWAVE,
+		"mwavedd::mwave_init, return from tp3780I_EnableDSP"
+		" retval %x\n",
+		retval);
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd:mwave_init: Error:"
+				" Failed to enable DSP\n");
+		goto cleanup_error;
+	}
+	pDrvData->bDSPEnabled = TRUE;
+
+	if (misc_register(&mwave_misc_dev) < 0) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd:mwave_init: Error:"
+				" Failed to register misc device\n");
+		goto cleanup_error;
+	}
+	pDrvData->bMwaveDevRegistered = TRUE;
+
+	pDrvData->sLine = register_serial_portandirq(
+		pDrvData->rBDData.rDspSettings.usUartBaseIO,
+		pDrvData->rBDData.rDspSettings.usUartIrq
+	);
+	if (pDrvData->sLine < 0) {
+		PRINTK_ERROR(KERN_ERR_MWAVE
+				"mwavedd:mwave_init: Error:"
+				" Failed to register serial driver\n");
+		goto cleanup_error;
+	}
+	/* uart is registered */
+
+#if 0
+	/* sysfs */
+	memset(&mwave_device, 0, sizeof (struct device));
+	snprintf(mwave_device.bus_id, BUS_ID_SIZE, "mwave");
+
+	if (device_register(&mwave_device))
+		goto cleanup_error;
+	pDrvData->device_registered = TRUE;
+	for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) {
+		if(device_create_file(&mwave_device, mwave_dev_attrs[i])) {
+			PRINTK_ERROR(KERN_ERR_MWAVE
+					"mwavedd:mwave_init: Error:"
+					" Failed to create sysfs file %s\n",
+					mwave_dev_attrs[i]->attr.name);
+			goto cleanup_error;
+		}
+		pDrvData->nr_registered_attrs++;
+	}
+#endif
+
+	/* SUCCESS! */
+	return 0;
+
+cleanup_error:
+	PRINTK_ERROR(KERN_ERR_MWAVE
+			"mwavedd::mwave_init: Error:"
+			" Failed to initialize\n");
+	mwave_exit(); /* clean up */
+
+	return -EIO;
+}
+
+module_init(mwave_init);
+
diff --git a/drivers/char/mwave/mwavedd.h b/drivers/char/mwave/mwavedd.h
new file mode 100644
index 0000000..8eca61e
--- /dev/null
+++ b/drivers/char/mwave/mwavedd.h
@@ -0,0 +1,150 @@
+/*
+*
+* mwavedd.h -- declarations for mwave device driver
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#ifndef _LINUX_MWAVEDD_H
+#define _LINUX_MWAVEDD_H
+#include "3780i.h"
+#include "tp3780i.h"
+#include "smapi.h"
+#include "mwavepub.h"
+#include <linux/ioctl.h>
+#include <asm/uaccess.h>
+#include <linux/wait.h>
+
+extern int mwave_debug;
+extern int mwave_3780i_irq;
+extern int mwave_3780i_io;
+extern int mwave_uart_irq;
+extern int mwave_uart_io;
+
+#define PRINTK_ERROR printk
+#define KERN_ERR_MWAVE KERN_ERR "mwave: "
+
+#define TRACE_MWAVE     0x0001
+#define TRACE_SMAPI     0x0002
+#define TRACE_3780I     0x0004
+#define TRACE_TP3780I   0x0008
+
+#ifdef MW_TRACE
+#define PRINTK_1(f,s)                       \
+  if (f & (mwave_debug)) {                  \
+    printk(s);                              \
+  }
+
+#define PRINTK_2(f,s,v1)                    \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1);                           \
+  }
+
+#define PRINTK_3(f,s,v1,v2)                 \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2);                        \
+  }
+
+#define PRINTK_4(f,s,v1,v2,v3)              \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2,v3);                     \
+  }
+
+#define PRINTK_5(f,s,v1,v2,v3,v4)           \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2,v3,v4);                  \
+  }
+
+#define PRINTK_6(f,s,v1,v2,v3,v4,v5)        \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2,v3,v4,v5);               \
+  }
+
+#define PRINTK_7(f,s,v1,v2,v3,v4,v5,v6)     \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2,v3,v4,v5,v6);            \
+  }
+
+#define PRINTK_8(f,s,v1,v2,v3,v4,v5,v6,v7)  \
+  if (f & (mwave_debug)) {                  \
+    printk(s,v1,v2,v3,v4,v5,v6,v7);         \
+  }
+
+#else
+#define PRINTK_1(f,s)
+#define PRINTK_2(f,s,v1)
+#define PRINTK_3(f,s,v1,v2)
+#define PRINTK_4(f,s,v1,v2,v3)
+#define PRINTK_5(f,s,v1,v2,v3,v4)
+#define PRINTK_6(f,s,v1,v2,v3,v4,v5)
+#define PRINTK_7(f,s,v1,v2,v3,v4,v5,v6)
+#define PRINTK_8(f,s,v1,v2,v3,v4,v5,v6,v7)
+#endif
+
+
+typedef struct _MWAVE_IPC {
+	unsigned short usIntCount;	/* 0=none, 1=first, 2=greater than 1st */
+	BOOLEAN bIsEnabled;
+	BOOLEAN bIsHere;
+	/* entry spin lock */
+	wait_queue_head_t ipc_wait_queue;
+} MWAVE_IPC;
+
+typedef struct _MWAVE_DEVICE_DATA {
+	THINKPAD_BD_DATA rBDData;	/* board driver's data area */
+	unsigned long ulIPCSource_ISR;	/* IPC source bits for recently processed intr, set during ISR processing */
+	unsigned long ulIPCSource_DPC;	/* IPC source bits for recently processed intr, set during DPC processing */
+	BOOLEAN bBDInitialized;
+	BOOLEAN bResourcesClaimed;
+	BOOLEAN bDSPEnabled;
+	BOOLEAN bDSPReset;
+	MWAVE_IPC IPCs[16];
+	BOOLEAN bMwaveDevRegistered;
+	short sLine;
+	int nr_registered_attrs;
+	int device_registered;
+
+} MWAVE_DEVICE_DATA, *pMWAVE_DEVICE_DATA;
+
+#endif
diff --git a/drivers/char/mwave/mwavepub.h b/drivers/char/mwave/mwavepub.h
new file mode 100644
index 0000000..f1f9da7
--- /dev/null
+++ b/drivers/char/mwave/mwavepub.h
@@ -0,0 +1,89 @@
+/*
+*
+* mwavepub.h -- PUBLIC declarations for the mwave driver
+*               and applications using it
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#ifndef _LINUX_MWAVEPUB_H
+#define _LINUX_MWAVEPUB_H
+
+#include <linux/miscdevice.h>
+
+
+typedef struct _MW_ABILITIES {
+	unsigned long instr_per_sec;
+	unsigned long data_size;
+	unsigned long inst_size;
+	unsigned long bus_dma_bw;
+	unsigned short uart_enable;
+	short component_count;
+	unsigned long component_list[7];
+	char mwave_os_name[16];
+	char bios_task_name[16];
+} MW_ABILITIES, *pMW_ABILITIES;
+
+
+typedef struct _MW_READWRITE {
+	unsigned short usDspAddress;	/* The dsp address */
+	unsigned long ulDataLength;	/* The size in bytes of the data or user buffer */
+	void *pBuf;		/* Input:variable sized buffer */
+} MW_READWRITE, *pMW_READWRITE;
+
+#define IOCTL_MW_RESET           _IO(MWAVE_MINOR,1)
+#define IOCTL_MW_RUN             _IO(MWAVE_MINOR,2)
+#define IOCTL_MW_DSP_ABILITIES   _IOR(MWAVE_MINOR,3,MW_ABILITIES)
+#define IOCTL_MW_READ_DATA       _IOR(MWAVE_MINOR,4,MW_READWRITE)
+#define IOCTL_MW_READCLEAR_DATA  _IOR(MWAVE_MINOR,5,MW_READWRITE)
+#define IOCTL_MW_READ_INST       _IOR(MWAVE_MINOR,6,MW_READWRITE)
+#define IOCTL_MW_WRITE_DATA      _IOW(MWAVE_MINOR,7,MW_READWRITE)
+#define IOCTL_MW_WRITE_INST      _IOW(MWAVE_MINOR,8,MW_READWRITE)
+#define IOCTL_MW_REGISTER_IPC    _IOW(MWAVE_MINOR,9,int)
+#define IOCTL_MW_UNREGISTER_IPC  _IOW(MWAVE_MINOR,10,int)
+#define IOCTL_MW_GET_IPC         _IOW(MWAVE_MINOR,11,int)
+#define IOCTL_MW_TRACE           _IOR(MWAVE_MINOR,12,MW_READWRITE)
+
+
+#endif
diff --git a/drivers/char/mwave/smapi.c b/drivers/char/mwave/smapi.c
new file mode 100644
index 0000000..6187fd1
--- /dev/null
+++ b/drivers/char/mwave/smapi.c
@@ -0,0 +1,570 @@
+/*
+*
+* smapi.c -- SMAPI interface routines
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#include <linux/kernel.h>
+#include <linux/mc146818rtc.h>	/* CMOS defines */
+#include "smapi.h"
+#include "mwavedd.h"
+
+static unsigned short g_usSmapiPort = 0;
+
+
+static int smapi_request(unsigned short inBX, unsigned short inCX,
+			 unsigned short inDI, unsigned short inSI,
+			 unsigned short *outAX, unsigned short *outBX,
+			 unsigned short *outCX, unsigned short *outDX,
+			 unsigned short *outDI, unsigned short *outSI)
+{
+	unsigned short myoutAX = 2, *pmyoutAX = &myoutAX;
+	unsigned short myoutBX = 3, *pmyoutBX = &myoutBX;
+	unsigned short myoutCX = 4, *pmyoutCX = &myoutCX;
+	unsigned short myoutDX = 5, *pmyoutDX = &myoutDX;
+	unsigned short myoutDI = 6, *pmyoutDI = &myoutDI;
+	unsigned short myoutSI = 7, *pmyoutSI = &myoutSI;
+	unsigned short usSmapiOK = -EIO, *pusSmapiOK = &usSmapiOK;
+	unsigned int inBXCX = (inBX << 16) | inCX;
+	unsigned int inDISI = (inDI << 16) | inSI;
+	int retval = 0;
+
+	PRINTK_5(TRACE_SMAPI, "inBX %x inCX %x inDI %x inSI %x\n",
+		inBX, inCX, inDI, inSI);
+
+	__asm__ __volatile__("movw  $0x5380,%%ax\n\t"
+			    "movl  %7,%%ebx\n\t"
+			    "shrl  $16, %%ebx\n\t"
+			    "movw  %7,%%cx\n\t"
+			    "movl  %8,%%edi\n\t"
+			    "shrl  $16,%%edi\n\t"
+			    "movw  %8,%%si\n\t"
+			    "movw  %9,%%dx\n\t"
+			    "out   %%al,%%dx\n\t"
+			    "out   %%al,$0x4F\n\t"
+			    "cmpb  $0x53,%%ah\n\t"
+			    "je    2f\n\t"
+			    "1:\n\t"
+			    "orb   %%ah,%%ah\n\t"
+			    "jnz   2f\n\t"
+			    "movw  %%ax,%0\n\t"
+			    "movw  %%bx,%1\n\t"
+			    "movw  %%cx,%2\n\t"
+			    "movw  %%dx,%3\n\t"
+			    "movw  %%di,%4\n\t"
+			    "movw  %%si,%5\n\t"
+			    "movw  $1,%6\n\t"
+			    "2:\n\t":"=m"(*(unsigned short *) pmyoutAX),
+			    "=m"(*(unsigned short *) pmyoutBX),
+			    "=m"(*(unsigned short *) pmyoutCX),
+			    "=m"(*(unsigned short *) pmyoutDX),
+			    "=m"(*(unsigned short *) pmyoutDI),
+			    "=m"(*(unsigned short *) pmyoutSI),
+			    "=m"(*(unsigned short *) pusSmapiOK)
+			    :"m"(inBXCX), "m"(inDISI), "m"(g_usSmapiPort)
+			    :"%eax", "%ebx", "%ecx", "%edx", "%edi",
+			    "%esi");
+
+	PRINTK_8(TRACE_SMAPI,
+		"myoutAX %x myoutBX %x myoutCX %x myoutDX %x myoutDI %x myoutSI %x usSmapiOK %x\n",
+		myoutAX, myoutBX, myoutCX, myoutDX, myoutDI, myoutSI,
+		usSmapiOK);
+	*outAX = myoutAX;
+	*outBX = myoutBX;
+	*outCX = myoutCX;
+	*outDX = myoutDX;
+	*outDI = myoutDI;
+	*outSI = myoutSI;
+
+	retval = (usSmapiOK == 1) ? 0 : -EIO;
+	PRINTK_2(TRACE_SMAPI, "smapi::smapi_request exit retval %x\n", retval);
+	return retval;
+}
+
+
+int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
+{
+	int bRC = -EIO;
+	unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
+	unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
+	unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
+	unsigned short numDspBases = 8;
+	unsigned short numUartBases = 4;
+
+	PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n");
+
+	bRC = smapi_request(0x1802, 0x0000, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Error: Could not get DSP Settings. Aborting.\n");
+		return bRC;
+	}
+
+	PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
+
+	pSettings->bDSPPresent = ((usBX & 0x0100) != 0);
+	pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
+	pSettings->usDspIRQ = usSI & 0x00FF;
+	pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
+	if ((usDI & 0x00FF) < numDspBases) {
+		pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
+	} else {
+		pSettings->usDspBaseIO = 0;
+	}
+	PRINTK_6(TRACE_SMAPI,
+		"smapi::smapi_query_DSP_cfg get DSP Settings bDSPPresent %x bDSPEnabled %x usDspIRQ %x usDspDMA %x usDspBaseIO %x\n",
+		pSettings->bDSPPresent, pSettings->bDSPEnabled,
+		pSettings->usDspIRQ, pSettings->usDspDMA,
+		pSettings->usDspBaseIO);
+
+	/* check for illegal values */
+	if ( pSettings->usDspBaseIO == 0 ) 
+		PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP base I/O address is 0\n");
+	if ( pSettings->usDspIRQ == 0 )
+		PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP IRQ line is 0\n");
+
+	bRC = smapi_request(0x1804, 0x0000, 0, 0,
+	   	&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) {
+		PRINTK_ERROR("smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting.\n");
+		return bRC;
+	} 
+
+	PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
+
+	pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
+	pSettings->usUartIRQ = usSI & 0x000F;
+	if (((usSI & 0xFF00) >> 8) < numUartBases) {
+		pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
+	} else {
+		pSettings->usUartBaseIO = 0;
+	}
+
+	PRINTK_4(TRACE_SMAPI,
+		"smapi::smapi_query_DSP_cfg get DSP modem settings bModemEnabled %x usUartIRQ %x usUartBaseIO %x\n",
+		pSettings->bModemEnabled,
+		pSettings->usUartIRQ,
+		pSettings->usUartBaseIO);
+
+	/* check for illegal values */
+	if ( pSettings->usUartBaseIO == 0 ) 
+		PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART base I/O address is 0\n");
+	if ( pSettings->usUartIRQ == 0 )
+		PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART IRQ line is 0\n");
+
+	PRINTK_2(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg exit bRC %x\n", bRC);
+
+	return bRC;
+}
+
+
+int smapi_set_DSP_cfg(void)
+{
+	int bRC = -EIO;
+	int i;
+	unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
+	unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
+	unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
+	unsigned short ausDspIrqs[] = { 5, 7, 10, 11, 15 };
+	unsigned short ausUartIrqs[] = { 3, 4 };
+
+	unsigned short numDspBases = 8;
+	unsigned short numUartBases = 4;
+	unsigned short numDspIrqs = 5;
+	unsigned short numUartIrqs = 2;
+	unsigned short dspio_index = 0, uartio_index = 0;
+
+	PRINTK_5(TRACE_SMAPI,
+		"smapi::smapi_set_DSP_cfg entry mwave_3780i_irq %x mwave_3780i_io %x mwave_uart_irq %x mwave_uart_io %x\n",
+		mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io);
+
+	if (mwave_3780i_io) {
+		for (i = 0; i < numDspBases; i++) {
+			if (mwave_3780i_io == ausDspBases[i])
+				break;
+		}
+		if (i == numDspBases) {
+			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io);
+			return bRC;
+		}
+		dspio_index = i;
+	}
+
+	if (mwave_3780i_irq) {
+		for (i = 0; i < numDspIrqs; i++) {
+			if (mwave_3780i_irq == ausDspIrqs[i])
+				break;
+		}
+		if (i == numDspIrqs) {
+			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq);
+			return bRC;
+		}
+	}
+
+	if (mwave_uart_io) {
+		for (i = 0; i < numUartBases; i++) {
+			if (mwave_uart_io == ausUartBases[i])
+				break;
+		}
+		if (i == numUartBases) {
+			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io);
+			return bRC;
+		}
+		uartio_index = i;
+	}
+
+
+	if (mwave_uart_irq) {
+		for (i = 0; i < numUartIrqs; i++) {
+			if (mwave_uart_irq == ausUartIrqs[i])
+				break;
+		}
+		if (i == numUartIrqs) {
+			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq);
+			return bRC;
+		}
+	}
+
+	if (mwave_uart_irq || mwave_uart_io) {
+
+		/* Check serial port A */
+		bRC = smapi_request(0x1402, 0x0000, 0, 0,
+			&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+		if (bRC) goto exit_smapi_request_error;
+		/* bRC == 0 */
+		if (usBX & 0x0100) {	/* serial port A is present */
+			if (usCX & 1) {	/* serial port is enabled */
+				if ((usSI & 0xFF) == mwave_uart_irq) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_ERROR(KERN_ERR_MWAVE
+						"smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
+#else
+					PRINTK_3(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_1(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg Disabling conflicting serial port\n");
+					bRC = smapi_request(0x1403, 0x0100, 0, usSI,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+					bRC = smapi_request(0x1402, 0x0000, 0, 0,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+#else
+					goto exit_conflict;
+#endif
+				} else {
+					if ((usSI >> 8) == uartio_index) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+						PRINTK_ERROR(KERN_ERR_MWAVE
+							"smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
+#else
+						PRINTK_3(TRACE_SMAPI,
+							"smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+						PRINTK_1(TRACE_SMAPI,
+							"smapi::smapi_set_DSP_cfg Disabling conflicting serial port A\n");
+						bRC = smapi_request (0x1403, 0x0100, 0, usSI,
+							&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+						if (bRC) goto exit_smapi_request_error;
+						bRC = smapi_request (0x1402, 0x0000, 0, 0,
+							&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+						if (bRC) goto exit_smapi_request_error;
+#else
+						goto exit_conflict;
+#endif
+					}
+				}
+			}
+		}
+
+		/* Check serial port B */
+		bRC = smapi_request(0x1404, 0x0000, 0, 0,
+			&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+		if (bRC) goto exit_smapi_request_error;
+		/* bRC == 0 */
+		if (usBX & 0x0100) {	/* serial port B is present */
+			if (usCX & 1) {	/* serial port is enabled */
+				if ((usSI & 0xFF) == mwave_uart_irq) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_ERROR(KERN_ERR_MWAVE
+						"smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
+#else
+					PRINTK_3(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_1(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
+					bRC = smapi_request(0x1405, 0x0100, 0, usSI,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+					bRC = smapi_request(0x1404, 0x0000, 0, 0,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+#else
+					goto exit_conflict;
+#endif
+				} else {
+					if ((usSI >> 8) == uartio_index) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+						PRINTK_ERROR(KERN_ERR_MWAVE
+							"smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
+#else
+						PRINTK_3(TRACE_SMAPI,
+							"smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+						PRINTK_1 (TRACE_SMAPI,
+						    "smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
+						bRC = smapi_request (0x1405, 0x0100, 0, usSI,
+							&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+						if (bRC) goto exit_smapi_request_error;
+						bRC = smapi_request (0x1404, 0x0000, 0, 0,
+							&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+						if (bRC) goto exit_smapi_request_error;
+#else
+						goto exit_conflict;
+#endif
+					}
+				}
+			}
+		}
+
+		/* Check IR port */
+		bRC = smapi_request(0x1700, 0x0000, 0, 0,
+			&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+		if (bRC) goto exit_smapi_request_error;
+		bRC = smapi_request(0x1704, 0x0000, 0, 0,
+			&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+		if (bRC) goto exit_smapi_request_error;
+		/* bRC == 0 */
+		if ((usCX & 0xff) != 0xff) { /* IR port not disabled */
+			if ((usCX & 0xff) == mwave_uart_irq) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+				PRINTK_ERROR(KERN_ERR_MWAVE
+					"smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
+#else
+				PRINTK_3(TRACE_SMAPI,
+					"smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+				PRINTK_1(TRACE_SMAPI,
+					"smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
+				bRC = smapi_request(0x1701, 0x0100, 0, 0,
+					&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+				if (bRC) goto exit_smapi_request_error;
+				bRC = smapi_request(0x1700, 0, 0, 0,
+					&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+				if (bRC) goto exit_smapi_request_error;
+				bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
+					&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+				if (bRC) goto exit_smapi_request_error;
+				bRC = smapi_request(0x1704, 0x0000, 0, 0,
+					&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+				if (bRC) goto exit_smapi_request_error;
+#else
+				goto exit_conflict;
+#endif
+			} else {
+				if ((usSI & 0xff) == uartio_index) {
+#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_ERROR(KERN_ERR_MWAVE
+						"smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
+#else
+					PRINTK_3(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
+#endif
+#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
+					PRINTK_1(TRACE_SMAPI,
+						"smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
+					bRC = smapi_request(0x1701, 0x0100, 0, 0,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+					bRC = smapi_request(0x1700, 0, 0, 0,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+					bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+					bRC = smapi_request(0x1704, 0x0000, 0, 0,
+						&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+					if (bRC) goto exit_smapi_request_error;
+#else
+					goto exit_conflict;
+#endif
+				}
+			}
+		}
+	}
+
+	bRC = smapi_request(0x1802, 0x0000, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+	if (mwave_3780i_io) {
+		usDI = dspio_index;
+	}
+	if (mwave_3780i_irq) {
+		usSI = (usSI & 0xff00) | mwave_3780i_irq;
+	}
+
+	bRC = smapi_request(0x1803, 0x0101, usDI, usSI,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+	bRC = smapi_request(0x1804, 0x0000, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+	if (mwave_uart_io) {
+		usSI = (usSI & 0x00ff) | (uartio_index << 8);
+	}
+	if (mwave_uart_irq) {
+		usSI = (usSI & 0xff00) | mwave_uart_irq;
+	}
+	bRC = smapi_request(0x1805, 0x0101, 0, usSI,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+	bRC = smapi_request(0x1802, 0x0000, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+	bRC = smapi_request(0x1804, 0x0000, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+	if (bRC) goto exit_smapi_request_error;
+
+/* normal exit: */
+	PRINTK_1(TRACE_SMAPI, "smapi::smapi_set_DSP_cfg exit\n");
+	return 0;
+
+exit_conflict:
+	/* Message has already been printed */
+	return -EIO;
+
+exit_smapi_request_error:
+	PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg exit on smapi_request error bRC %x\n", bRC);
+	return bRC;
+}
+
+
+int smapi_set_DSP_power_state(BOOLEAN bOn)
+{
+	int bRC = -EIO;
+	unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
+	unsigned short usPowerFunction;
+
+	PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state entry bOn %x\n", bOn);
+
+	usPowerFunction = (bOn) ? 1 : 0;
+
+	bRC = smapi_request(0x4901, 0x0000, 0, usPowerFunction,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+
+	PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state exit bRC %x\n", bRC);
+
+	return bRC;
+}
+
+#if 0
+static int SmapiQuerySystemID(void)
+{
+	int bRC = -EIO;
+	unsigned short usAX = 0xffff, usBX = 0xffff, usCX = 0xffff,
+		usDX = 0xffff, usDI = 0xffff, usSI = 0xffff;
+
+	printk("smapi::SmapiQUerySystemID entry\n");
+	bRC = smapi_request(0x0000, 0, 0, 0,
+		&usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
+
+	if (bRC == 0) {
+		printk("AX=%x, BX=%x, CX=%x, DX=%x, DI=%x, SI=%x\n",
+			usAX, usBX, usCX, usDX, usDI, usSI);
+	} else {
+		printk("smapi::SmapiQuerySystemID smapi_request error\n");
+	}
+
+	return bRC;
+}
+#endif  /*  0  */
+
+int smapi_init(void)
+{
+	int retval = -EIO;
+	unsigned short usSmapiID = 0;
+	unsigned long flags;
+
+	PRINTK_1(TRACE_SMAPI, "smapi::smapi_init entry\n");
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	usSmapiID = CMOS_READ(0x7C);
+	usSmapiID |= (CMOS_READ(0x7D) << 8);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	PRINTK_2(TRACE_SMAPI, "smapi::smapi_init usSmapiID %x\n", usSmapiID);
+
+	if (usSmapiID == 0x5349) {
+		spin_lock_irqsave(&rtc_lock, flags);
+		g_usSmapiPort = CMOS_READ(0x7E);
+		g_usSmapiPort |= (CMOS_READ(0x7F) << 8);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+		if (g_usSmapiPort == 0) {
+			PRINTK_ERROR("smapi::smapi_init, ERROR unable to read from SMAPI port\n");
+		} else {
+			PRINTK_2(TRACE_SMAPI,
+				"smapi::smapi_init, exit TRUE g_usSmapiPort %x\n",
+				g_usSmapiPort);
+			retval = 0;
+			//SmapiQuerySystemID();
+		}
+	} else {
+		PRINTK_ERROR("smapi::smapi_init, ERROR invalid usSmapiID\n");
+		retval = -ENXIO;
+	}
+
+	return retval;
+}
diff --git a/drivers/char/mwave/smapi.h b/drivers/char/mwave/smapi.h
new file mode 100644
index 0000000..64b2ec1
--- /dev/null
+++ b/drivers/char/mwave/smapi.h
@@ -0,0 +1,80 @@
+/*
+*
+* smapi.h -- declarations for SMAPI interface routines
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#ifndef _LINUX_SMAPI_H
+#define _LINUX_SMAPI_H
+
+#define TRUE 1
+#define FALSE 0
+#define BOOLEAN int
+
+typedef struct {
+	int bDSPPresent;
+	int bDSPEnabled;
+	int bModemEnabled;
+	int bMIDIEnabled;
+	int bSblstEnabled;
+	unsigned short usDspIRQ;
+	unsigned short usDspDMA;
+	unsigned short usDspBaseIO;
+	unsigned short usUartIRQ;
+	unsigned short usUartBaseIO;
+	unsigned short usMidiIRQ;
+	unsigned short usMidiBaseIO;
+	unsigned short usSndblstIRQ;
+	unsigned short usSndblstDMA;
+	unsigned short usSndblstBaseIO;
+} SMAPI_DSP_SETTINGS;
+
+int smapi_init(void);
+int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings);
+int smapi_set_DSP_cfg(void);
+int smapi_set_DSP_power_state(BOOLEAN bOn);
+
+
+#endif
diff --git a/drivers/char/mwave/tp3780i.c b/drivers/char/mwave/tp3780i.c
new file mode 100644
index 0000000..ab650cd
--- /dev/null
+++ b/drivers/char/mwave/tp3780i.c
@@ -0,0 +1,592 @@
+/*
+*
+* tp3780i.c -- board driver for 3780i on ThinkPads
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#include <linux/version.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include "smapi.h"
+#include "mwavedd.h"
+#include "tp3780i.h"
+#include "3780i.h"
+#include "mwavepub.h"
+
+extern MWAVE_DEVICE_DATA mwave_s_mdd;
+
+static unsigned short s_ausThinkpadIrqToField[16] =
+	{ 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004,
+	0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 };
+static unsigned short s_ausThinkpadDmaToField[8] =
+	{ 0x0001, 0x0002, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0x0004 };
+static unsigned short s_numIrqs = 16, s_numDmas = 8;
+
+
+static void EnableSRAM(THINKPAD_BD_DATA * pBDData)
+{
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	DSP_GPIO_OUTPUT_DATA_15_8 rGpioOutputData;
+	DSP_GPIO_DRIVER_ENABLE_15_8 rGpioDriverEnable;
+	DSP_GPIO_MODE_15_8 rGpioMode;
+
+	PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM, entry\n");
+
+	MKWORD(rGpioMode) = ReadMsaCfg(DSP_GpioModeControl_15_8);
+	rGpioMode.GpioMode10 = 0;
+	WriteMsaCfg(DSP_GpioModeControl_15_8, MKWORD(rGpioMode));
+
+	MKWORD(rGpioDriverEnable) = 0;
+	rGpioDriverEnable.Enable10 = TRUE;
+	rGpioDriverEnable.Mask10 = TRUE;
+	WriteMsaCfg(DSP_GpioDriverEnable_15_8, MKWORD(rGpioDriverEnable));
+
+	MKWORD(rGpioOutputData) = 0;
+	rGpioOutputData.Latch10 = 0;
+	rGpioOutputData.Mask10 = TRUE;
+	WriteMsaCfg(DSP_GpioOutputData_15_8, MKWORD(rGpioOutputData));
+
+	PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM exit\n");
+}
+
+
+static irqreturn_t UartInterrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	PRINTK_3(TRACE_TP3780I,
+		"tp3780i::UartInterrupt entry irq %x dev_id %p\n", irq, dev_id);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t DspInterrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pDrvData->rBDData.rDspSettings;
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	unsigned short usIPCSource = 0, usIsolationMask, usPCNum;
+
+	PRINTK_3(TRACE_TP3780I,
+		"tp3780i::DspInterrupt entry irq %x dev_id %p\n", irq, dev_id);
+
+	if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) {
+		PRINTK_2(TRACE_TP3780I,
+			"tp3780i::DspInterrupt, return from dsp3780i_GetIPCSource, usIPCSource %x\n",
+			usIPCSource);
+		usIsolationMask = 1;
+		for (usPCNum = 1; usPCNum <= 16; usPCNum++) {
+			if (usIPCSource & usIsolationMask) {
+				usIPCSource &= ~usIsolationMask;
+				PRINTK_3(TRACE_TP3780I,
+					"tp3780i::DspInterrupt usPCNum %x usIPCSource %x\n",
+					usPCNum, usIPCSource);
+				if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) {
+					pDrvData->IPCs[usPCNum - 1].usIntCount = 1;
+				}
+				PRINTK_2(TRACE_TP3780I,
+					"tp3780i::DspInterrupt usIntCount %x\n",
+					pDrvData->IPCs[usPCNum - 1].usIntCount);
+				if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == TRUE) {
+					PRINTK_2(TRACE_TP3780I,
+						"tp3780i::DspInterrupt, waking up usPCNum %x\n",
+						usPCNum - 1);
+					wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue);
+				} else {
+					PRINTK_2(TRACE_TP3780I,
+						"tp3780i::DspInterrupt, no one waiting for IPC %x\n",
+						usPCNum - 1);
+				}
+			}
+			if (usIPCSource == 0)
+				break;
+			/* try next IPC */
+			usIsolationMask = usIsolationMask << 1;
+		}
+	} else {
+		PRINTK_1(TRACE_TP3780I,
+			"tp3780i::DspInterrupt, return false from dsp3780i_GetIPCSource\n");
+	}
+	PRINTK_1(TRACE_TP3780I, "tp3780i::DspInterrupt exit\n");
+	return IRQ_HANDLED;
+}
+
+
+int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData entry pBDData %p\n", pBDData);
+
+	pBDData->bDSPEnabled = FALSE;
+	pSettings->bInterruptClaimed = FALSE;
+
+	retval = smapi_init();
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine\n");
+	} else {
+		if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) {
+			retval = smapi_set_DSP_cfg();
+		}
+	}
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData exit retval %x\n", retval);
+
+	return retval;
+}
+
+int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_Cleanup entry and exit pBDData %p\n", pBDData);
+
+	return retval;
+}
+
+int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData)
+{
+	SMAPI_DSP_SETTINGS rSmapiInfo;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_CalcResources entry pBDData %p\n", pBDData);
+
+	if (smapi_query_DSP_cfg(&rSmapiInfo)) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.\n");
+		return -EIO;
+	}
+
+	/* Sanity check */
+	if (
+		( rSmapiInfo.usDspIRQ == 0 )
+		|| ( rSmapiInfo.usDspBaseIO ==  0 )
+		|| ( rSmapiInfo.usUartIRQ ==  0 )
+		|| ( rSmapiInfo.usUartBaseIO ==  0 )
+	) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Illegal resource setting. Aborting.\n");
+		return -EIO;
+	}
+
+	pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent);
+	pSettings->bModemEnabled = rSmapiInfo.bModemEnabled;
+	pSettings->usDspIrq = rSmapiInfo.usDspIRQ;
+	pSettings->usDspDma = rSmapiInfo.usDspDMA;
+	pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO;
+	pSettings->usUartIrq = rSmapiInfo.usUartIRQ;
+	pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO;
+
+	pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE;
+	pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE;
+	pSettings->uIps = TP_ABILITIES_INTS_PER_SEC;
+
+	if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) {
+		pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1;
+	} else {
+		pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0;
+	}
+
+	PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_CalcResources exit\n");
+
+	return 0;
+}
+
+
+int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+	struct resource *pres;
+#endif
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_ClaimResources entry pBDData %p\n", pBDData);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+	pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
+	if ( pres == NULL ) retval = -EIO;
+#else
+	retval = check_region(pSettings->usDspBaseIO, 16);
+	if (!retval) request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
+#endif
+	if (retval) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_ClaimResources: Error: Could not claim I/O region starting at %x\n", pSettings->usDspBaseIO);
+		retval = -EIO;
+	}
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ClaimResources exit retval %x\n", retval);
+
+	return retval;
+}
+
+int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_ReleaseResources entry pBDData %p\n", pBDData);
+
+	release_region(pSettings->usDspBaseIO & (~3), 16);
+
+	if (pSettings->bInterruptClaimed) {
+		free_irq(pSettings->usDspIrq, NULL);
+		pSettings->bInterruptClaimed = FALSE;
+	}
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_ReleaseResources exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+
+int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData)
+{
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+	BOOLEAN bDSPPoweredUp = FALSE, bDSPEnabled = FALSE, bInterruptAllocated = FALSE;
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP entry pBDData %p\n", pBDData);
+
+	if (pBDData->bDSPEnabled) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: DSP already enabled!\n");
+		goto exit_cleanup;
+	}
+
+	if (!pSettings->bDSPEnabled) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780::tp3780I_EnableDSP: Error: pSettings->bDSPEnabled not set\n");
+		goto exit_cleanup;
+	}
+
+	if (
+		(pSettings->usDspIrq >= s_numIrqs)
+		|| (pSettings->usDspDma >= s_numDmas)
+		|| (s_ausThinkpadIrqToField[pSettings->usDspIrq] == 0xFFFF)
+		|| (s_ausThinkpadDmaToField[pSettings->usDspDma] == 0xFFFF)
+	) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: invalid irq %x\n", pSettings->usDspIrq);
+		goto exit_cleanup;
+	}
+
+	if (
+		((pSettings->usDspBaseIO & 0xF00F) != 0)
+		|| (pSettings->usDspBaseIO & 0x0FF0) == 0
+	) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid DSP base I/O address %x\n", pSettings->usDspBaseIO);
+		goto exit_cleanup;
+	}
+
+	if (pSettings->bModemEnabled) {
+		if (
+			pSettings->usUartIrq >= s_numIrqs
+			|| s_ausThinkpadIrqToField[pSettings->usUartIrq] == 0xFFFF
+		) {
+			PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid UART IRQ %x\n", pSettings->usUartIrq);
+			goto exit_cleanup;
+		}
+		switch (pSettings->usUartBaseIO) {
+			case 0x03F8:
+			case 0x02F8:
+			case 0x03E8:
+			case 0x02E8:
+				break;
+
+			default:
+				PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Invalid UART base I/O address %x\n", pSettings->usUartBaseIO);
+				goto exit_cleanup;
+		}
+	}
+
+	pSettings->bDspIrqActiveLow = pSettings->bDspIrqPulse = TRUE;
+	pSettings->bUartIrqActiveLow = pSettings->bUartIrqPulse = TRUE;
+
+	if (pBDData->bShareDspIrq) {
+		pSettings->bDspIrqActiveLow = FALSE;
+	}
+	if (pBDData->bShareUartIrq) {
+		pSettings->bUartIrqActiveLow = FALSE;
+	}
+
+	pSettings->usNumTransfers = TP_CFG_NumTransfers;
+	pSettings->usReRequest = TP_CFG_RerequestTimer;
+	pSettings->bEnableMEMCS16 = TP_CFG_MEMCS16;
+	pSettings->usIsaMemCmdWidth = TP_CFG_IsaMemCmdWidth;
+	pSettings->bGateIOCHRDY = TP_CFG_GateIOCHRDY;
+	pSettings->bEnablePwrMgmt = TP_CFG_EnablePwrMgmt;
+	pSettings->usHBusTimerLoadValue = TP_CFG_HBusTimerValue;
+	pSettings->bDisableLBusTimeout = TP_CFG_DisableLBusTimeout;
+	pSettings->usN_Divisor = TP_CFG_N_Divisor;
+	pSettings->usM_Multiplier = TP_CFG_M_Multiplier;
+	pSettings->bPllBypass = TP_CFG_PllBypass;
+	pSettings->usChipletEnable = TP_CFG_ChipletEnable;
+
+	if (request_irq(pSettings->usUartIrq, &UartInterrupt, 0, "mwave_uart", NULL)) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Could not get UART IRQ %x\n", pSettings->usUartIrq);
+		goto exit_cleanup;
+	} else {		/* no conflict just release */
+		free_irq(pSettings->usUartIrq, NULL);
+	}
+
+	if (request_irq(pSettings->usDspIrq, &DspInterrupt, 0, "mwave_3780i", NULL)) {
+		PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Could not get 3780i IRQ %x\n", pSettings->usDspIrq);
+		goto exit_cleanup;
+	} else {
+		PRINTK_3(TRACE_TP3780I,
+			"tp3780i::tp3780I_EnableDSP, got interrupt %x bShareDspIrq %x\n",
+			pSettings->usDspIrq, pBDData->bShareDspIrq);
+		bInterruptAllocated = TRUE;
+		pSettings->bInterruptClaimed = TRUE;
+	}
+
+	smapi_set_DSP_power_state(FALSE);
+	if (smapi_set_DSP_power_state(TRUE)) {
+		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: smapi_set_DSP_power_state(TRUE) failed\n");
+		goto exit_cleanup;
+	} else {
+		bDSPPoweredUp = TRUE;
+	}
+
+	if (dsp3780I_EnableDSP(pSettings, s_ausThinkpadIrqToField, s_ausThinkpadDmaToField)) {
+		PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: dsp7880I_EnableDSP() failed\n");
+		goto exit_cleanup;
+	} else {
+		bDSPEnabled = TRUE;
+	}
+
+	EnableSRAM(pBDData);
+
+	pBDData->bDSPEnabled = TRUE;
+
+	PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP exit\n");
+
+	return 0;
+
+exit_cleanup:
+	PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Cleaning up\n");
+	if (bDSPEnabled)
+		dsp3780I_DisableDSP(pSettings);
+	if (bDSPPoweredUp)
+		smapi_set_DSP_power_state(FALSE);
+	if (bInterruptAllocated) {
+		free_irq(pSettings->usDspIrq, NULL);
+		pSettings->bInterruptClaimed = FALSE;
+	}
+	return -EIO;
+}
+
+
+int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP entry pBDData %p\n", pBDData);
+
+	if (pBDData->bDSPEnabled) {
+		dsp3780I_DisableDSP(&pBDData->rDspSettings);
+		if (pSettings->bInterruptClaimed) {
+			free_irq(pSettings->usDspIrq, NULL);
+			pSettings->bInterruptClaimed = FALSE;
+		}
+		smapi_set_DSP_power_state(FALSE);
+		pBDData->bDSPEnabled = FALSE;
+	}
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP entry pBDData %p\n",
+		pBDData);
+
+	if (dsp3780I_Reset(pSettings) == 0) {
+		EnableSRAM(pBDData);
+	} else {
+		retval = -EIO;
+	}
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP entry pBDData %p\n", pBDData);
+
+	if (dsp3780I_Run(pSettings) == 0) {
+		// @BUG @TBD EnableSRAM(pBDData);
+	} else {
+		retval = -EIO;
+	}
+
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities)
+{
+	int retval = 0;
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_QueryAbilities entry pBDData %p\n", pBDData);
+
+	/* fill out standard constant fields */
+	pAbilities->instr_per_sec = pBDData->rDspSettings.uIps;
+	pAbilities->data_size = pBDData->rDspSettings.uDStoreSize;
+	pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize;
+	pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth;
+
+	/* fill out dynamically determined fields */
+	pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK;
+	pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK;
+	pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK;
+	pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK;
+	pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK;
+	pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK;
+	pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK;
+	pAbilities->component_count = 7;
+
+	/* Fill out Mwave OS and BIOS task names */
+
+	memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME,
+		sizeof(TP_ABILITIES_MWAVEOS_NAME));
+	memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME,
+		sizeof(TP_ABILITIES_BIOSTASK_NAME));
+
+	PRINTK_1(TRACE_TP3780I,
+		"tp3780i::tp3780I_QueryAbilities exit retval=SUCCESSFUL\n");
+
+	return retval;
+}
+
+int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
+                               void __user *pvBuffer, unsigned int uCount,
+                               unsigned long ulDSPAddr)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	BOOLEAN bRC = 0;
+
+	PRINTK_6(TRACE_TP3780I,
+		"tp3780i::tp3780I_ReadWriteDspDStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr);
+
+	if (pBDData->bDSPEnabled) {
+		switch (uOpcode) {
+		case IOCTL_MW_READ_DATA:
+			bRC = dsp3780I_ReadDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
+			break;
+
+		case IOCTL_MW_READCLEAR_DATA:
+			bRC = dsp3780I_ReadAndClearDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
+			break;
+
+		case IOCTL_MW_WRITE_DATA:
+			bRC = dsp3780I_WriteDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
+			break;
+		}
+	}
+
+	retval = (bRC) ? -EIO : 0;
+	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ReadWriteDspDStore exit retval %x\n", retval);
+
+	return retval;
+}
+
+
+int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
+                               void __user *pvBuffer, unsigned int uCount,
+                               unsigned long ulDSPAddr)
+{
+	int retval = 0;
+	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
+	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
+	BOOLEAN bRC = 0;
+
+	PRINTK_6(TRACE_TP3780I,
+		"tp3780i::tp3780I_ReadWriteDspIStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n",
+		pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr);
+
+	if (pBDData->bDSPEnabled) {
+		switch (uOpcode) {
+		case IOCTL_MW_READ_INST:
+			bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
+			break;
+
+		case IOCTL_MW_WRITE_INST:
+			bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
+			break;
+		}
+	}
+
+	retval = (bRC) ? -EIO : 0;
+
+	PRINTK_2(TRACE_TP3780I,
+		"tp3780i::tp3780I_ReadWriteDspIStore exit retval %x\n", retval);
+
+	return retval;
+}
+
diff --git a/drivers/char/mwave/tp3780i.h b/drivers/char/mwave/tp3780i.h
new file mode 100644
index 0000000..07685b6
--- /dev/null
+++ b/drivers/char/mwave/tp3780i.h
@@ -0,0 +1,103 @@
+/*
+*
+* tp3780i.h -- declarations for tp3780i.c
+*
+*
+* Written By: Mike Sullivan IBM Corporation
+*
+* Copyright (C) 1999 IBM Corporation
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* NO WARRANTY
+* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+* solely responsible for determining the appropriateness of using and
+* distributing the Program and assumes all risks associated with its
+* exercise of rights under this Agreement, including but not limited to
+* the risks and costs of program errors, damage to or loss of data,
+* programs or equipment, and unavailability or interruption of operations.
+*
+* DISCLAIMER OF LIABILITY
+* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*
+*
+* 10/23/2000 - Alpha Release
+*	First release to the public
+*/
+
+#ifndef _LINUX_TP3780I_H
+#define _LINUX_TP3780I_H
+
+#include <asm/io.h>
+#include "mwavepub.h"
+
+
+/* DSP abilities constants for 3780i based Thinkpads */
+#define TP_ABILITIES_INTS_PER_SEC       39160800
+#define TP_ABILITIES_DATA_SIZE          32768
+#define TP_ABILITIES_INST_SIZE          32768
+#define TP_ABILITIES_MWAVEOS_NAME       "mwaveos0700.dsp"
+#define TP_ABILITIES_BIOSTASK_NAME      "mwbio701.dsp"
+
+
+/* DSP configuration values for 3780i based Thinkpads */
+#define TP_CFG_NumTransfers     3	/* 16 transfers */
+#define TP_CFG_RerequestTimer   1	/* 2 usec */
+#define TP_CFG_MEMCS16          0	/* Disabled, 16-bit memory assumed */
+#define TP_CFG_IsaMemCmdWidth   3	/* 295 nsec (16-bit) */
+#define TP_CFG_GateIOCHRDY      0	/* No IOCHRDY gating */
+#define TP_CFG_EnablePwrMgmt    1	/* Enable low poser suspend/resume */
+#define TP_CFG_HBusTimerValue 255	/* HBus timer load value */
+#define TP_CFG_DisableLBusTimeout 0	/* Enable LBus timeout */
+#define TP_CFG_N_Divisor       32	/* Clock = 39.1608 Mhz */
+#define TP_CFG_M_Multiplier    37	/* " */
+#define TP_CFG_PllBypass        0	/* don't bypass */
+#define TP_CFG_ChipletEnable 0xFFFF	/* Enable all chiplets */
+
+typedef struct {
+	int bDSPEnabled;
+	int bShareDspIrq;
+	int bShareUartIrq;
+	DSP_3780I_CONFIG_SETTINGS rDspSettings;
+} THINKPAD_BD_DATA;
+
+int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData);
+int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData);
+int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData);
+int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData);
+int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData);
+int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData);
+int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData);
+int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData);
+int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities);
+int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData);
+int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
+                               void __user *pvBuffer, unsigned int uCount,
+                               unsigned long ulDSPAddr);
+int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
+                               void __user *pvBuffer, unsigned int uCount,
+                               unsigned long ulDSPAddr);
+
+
+#endif