IPMI: Style fixes in the system interface code

Lots of style fixes for the IPMI system interface driver.  No functional
changes.  Basically fixes everything reported by checkpatch and fixes the
comment style.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Rocky Craig <rocky.craig@hp.com>
Cc: Hannes Schulz <schulz@schwaar.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 94 insertions, 59 deletions

diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index e736119..7b98c06 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -37,26 +37,32 @@
 #define BT_DEBUG_ENABLE	1	/* Generic messages */
 #define BT_DEBUG_MSG	2	/* Prints all request/response buffers */
 #define BT_DEBUG_STATES	4	/* Verbose look at state changes */
-/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
-   value */
+/*
+ * BT_DEBUG_OFF must be zero to correspond to the default uninitialized
+ * value
+ */
 
 static int bt_debug; /* 0 == BT_DEBUG_OFF */
 
 module_param(bt_debug, int, 0644);
 MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
 
-/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
-   and 64 byte buffers.  However, one HP implementation wants 255 bytes of
-   buffer (with a documented message of 160 bytes) so go for the max.
-   Since the Open IPMI architecture is single-message oriented at this
-   stage, the queue depth of BT is of no concern. */
+/*
+ * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
+ * and 64 byte buffers.  However, one HP implementation wants 255 bytes of
+ * buffer (with a documented message of 160 bytes) so go for the max.
+ * Since the Open IPMI architecture is single-message oriented at this
+ * stage, the queue depth of BT is of no concern.
+ */
 
 #define BT_NORMAL_TIMEOUT	5	/* seconds */
 #define BT_NORMAL_RETRY_LIMIT	2
 #define BT_RESET_DELAY		6	/* seconds after warm reset */
 
-/* States are written in chronological order and usually cover
-   multiple rows of the state table discussion in the IPMI spec. */
+/*
+ * States are written in chronological order and usually cover
+ * multiple rows of the state table discussion in the IPMI spec.
+ */
 
 enum bt_states {
 	BT_STATE_IDLE = 0,	/* Order is critical in this list */
@@ -76,10 +82,12 @@ enum bt_states {
 	BT_STATE_LONG_BUSY	/* BT doesn't get hosed :-) */
 };
 
-/* Macros seen at the end of state "case" blocks.  They help with legibility
-   and debugging. */
+/*
+ * Macros seen at the end of state "case" blocks.  They help with legibility
+ * and debugging.
+ */
 
-#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
+#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; }
 
 #define BT_SI_SM_RETURN(Y)   { last_printed = BT_STATE_PRINTME; return Y; }
 
@@ -110,11 +118,13 @@ struct si_sm_data {
 #define BT_H_BUSY	0x40
 #define BT_B_BUSY	0x80
 
-/* Some bits are toggled on each write: write once to set it, once
-   more to clear it; writing a zero does nothing.  To absolutely
-   clear it, check its state and write if set.  This avoids the "get
-   current then use as mask" scheme to modify one bit.  Note that the
-   variable "bt" is hardcoded into these macros. */
+/*
+ * Some bits are toggled on each write: write once to set it, once
+ * more to clear it; writing a zero does nothing.  To absolutely
+ * clear it, check its state and write if set.  This avoids the "get
+ * current then use as mask" scheme to modify one bit.  Note that the
+ * variable "bt" is hardcoded into these macros.
+ */
 
 #define BT_STATUS	bt->io->inputb(bt->io, 0)
 #define BT_CONTROL(x)	bt->io->outputb(bt->io, 0, x)
@@ -125,8 +135,10 @@ struct si_sm_data {
 #define BT_INTMASK_R	bt->io->inputb(bt->io, 2)
 #define BT_INTMASK_W(x)	bt->io->outputb(bt->io, 2, x)
 
-/* Convenience routines for debugging.  These are not multi-open safe!
-   Note the macros have hardcoded variables in them. */
+/*
+ * Convenience routines for debugging.  These are not multi-open safe!
+ * Note the macros have hardcoded variables in them.
+ */
 
 static char *state2txt(unsigned char state)
 {
@@ -182,7 +194,8 @@ static char *status2txt(unsigned char status)
 static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
 {
 	memset(bt, 0, sizeof(struct si_sm_data));
-	if (bt->io != io) {		/* external: one-time only things */
+	if (bt->io != io) {
+		/* external: one-time only things */
 		bt->io = io;
 		bt->seq = 0;
 	}
@@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
 		printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
 		printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
 		for (i = 0; i < size; i ++)
-			printk (" %02x", data[i]);
+			printk(" %02x", data[i]);
 		printk("\n");
 	}
 	bt->write_data[0] = size + 1;	/* all data plus seq byte */
@@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt,
 	return 0;
 }
 
-/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
-   it calls this.  Strip out the length and seq bytes. */
+/*
+ * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
+ * it calls this.  Strip out the length and seq bytes.
+ */
 
 static int bt_get_result(struct si_sm_data *bt,
 			 unsigned char *data,
@@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt,
 		memcpy(data + 2, bt->read_data + 4, msg_len - 2);
 
 	if (bt_debug & BT_DEBUG_MSG) {
-		printk (KERN_WARNING "BT: result %d bytes:", msg_len);
+		printk(KERN_WARNING "BT: result %d bytes:", msg_len);
 		for (i = 0; i < msg_len; i++)
 			printk(" %02x", data[i]);
-		printk ("\n");
+		printk("\n");
 	}
 	return msg_len;
 }
@@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt)
 	BT_INTMASK_W(BT_BMC_HWRST);
 }
 
-/* Get rid of an unwanted/stale response.  This should only be needed for
-   BMCs that support multiple outstanding requests. */
+/*
+ * Get rid of an unwanted/stale response.  This should only be needed for
+ * BMCs that support multiple outstanding requests.
+ */
 
 static void drain_BMC2HOST(struct si_sm_data *bt)
 {
@@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt)
 		printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
 			bt->write_count, bt->seq);
 		for (i = 0; i < bt->write_count; i++)
-			printk (" %02x", bt->write_data[i]);
-		printk ("\n");
+			printk(" %02x", bt->write_data[i]);
+		printk("\n");
 	}
 	for (i = 0; i < bt->write_count; i++)
 		HOST2BMC(bt->write_data[i]);
@@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt)
 {
 	unsigned char i;
 
-	/* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
-	   Keep layout of first four bytes aligned with write_data[] */
+	/*
+	 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
+	 * Keep layout of first four bytes aligned with write_data[]
+	 */
 
 	bt->read_data[0] = BMC2HOST;
 	bt->read_count = bt->read_data[0];
@@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt)
 		if (max > 16)
 			max = 16;
 		for (i = 0; i < max; i++)
-			printk (" %02x", bt->read_data[i]);
-		printk ("%s\n", bt->read_count == max ? "" : " ...");
+			printk(KERN_CONT " %02x", bt->read_data[i]);
+		printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ...");
 	}
 
 	/* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
@@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
 	printk(KERN_WARNING "IPMI BT: %s in %s %s ", 	/* open-ended line */
 		reason, STATE2TXT, STATUS2TXT);
 
-	/* Per the IPMI spec, retries are based on the sequence number
-	   known only to this module, so manage a restart here. */
+	/*
+	 * Per the IPMI spec, retries are based on the sequence number
+	 * known only to this module, so manage a restart here.
+	 */
 	(bt->error_retries)++;
 	if (bt->error_retries < bt->BT_CAP_retries) {
 		printk("%d retries left\n",
@@ -412,8 +433,8 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
 		return SI_SM_CALL_WITHOUT_DELAY;
 	}
 
-	printk("failed %d retries, sending error response\n",
-		bt->BT_CAP_retries);
+	printk(KERN_WARNING "failed %d retries, sending error response\n",
+	       bt->BT_CAP_retries);
 	if (!bt->nonzero_status)
 		printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
 
@@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
 		return SI_SM_CALL_WITHOUT_DELAY;
 	}
 
-	/* Concoct a useful error message, set up the next state, and
-	   be done with this sequence. */
+	/*
+	 * Concoct a useful error message, set up the next state, and
+	 * be done with this sequence.
+	 */
 
 	bt->state = BT_STATE_IDLE;
 	switch (cCode) {
@@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 		last_printed = bt->state;
 	}
 
-	/* Commands that time out may still (eventually) provide a response.
-	   This stale response will get in the way of a new response so remove
-	   it if possible (hopefully during IDLE).  Even if it comes up later
-	   it will be rejected by its (now-forgotten) seq number. */
+	/*
+	 * Commands that time out may still (eventually) provide a response.
+	 * This stale response will get in the way of a new response so remove
+	 * it if possible (hopefully during IDLE).  Even if it comes up later
+	 * it will be rejected by its (now-forgotten) seq number.
+	 */
 
 	if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
 		drain_BMC2HOST(bt);
@@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 	}
 
 	if ((bt->state != BT_STATE_IDLE) &&
-	    (bt->state <  BT_STATE_PRINTME)) {		/* check timeout */
+	    (bt->state <  BT_STATE_PRINTME)) {
+		/* check timeout */
 		bt->timeout -= time;
 		if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
 			return error_recovery(bt,
@@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 
 	switch (bt->state) {
 
-	/* Idle state first checks for asynchronous messages from another
-	   channel, then does some opportunistic housekeeping. */
+	/*
+	 * Idle state first checks for asynchronous messages from another
+	 * channel, then does some opportunistic housekeeping.
+	 */
 
 	case BT_STATE_IDLE:
 		if (status & BT_SMS_ATN) {
@@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 			BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
 		BT_CONTROL(BT_H_BUSY);		/* set */
 
-		/* Uncached, ordered writes should just proceeed serially but
-		   some BMCs don't clear B2H_ATN with one hit.  Fast-path a
-		   workaround without too much penalty to the general case. */
+		/*
+		 * Uncached, ordered writes should just proceeed serially but
+		 * some BMCs don't clear B2H_ATN with one hit.  Fast-path a
+		 * workaround without too much penalty to the general case.
+		 */
 
 		BT_CONTROL(BT_B2H_ATN);		/* clear it to ACK the BMC */
 		BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
 				SI_SM_CALL_WITHOUT_DELAY);
 
 	case BT_STATE_CLEAR_B2H:
-		if (status & BT_B2H_ATN) {	/* keep hitting it */
+		if (status & BT_B2H_ATN) {
+			/* keep hitting it */
 			BT_CONTROL(BT_B2H_ATN);
 			BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
 		}
@@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 				SI_SM_CALL_WITHOUT_DELAY);
 
 	case BT_STATE_READ_BYTES:
-		if (!(status & BT_H_BUSY))	/* check in case of retry */
+		if (!(status & BT_H_BUSY))
+			/* check in case of retry */
 			BT_CONTROL(BT_H_BUSY);
 		BT_CONTROL(BT_CLR_RD_PTR);	/* start of BMC2HOST buffer */
 		i = read_all_bytes(bt);		/* true == packet seq match */
@@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 		BT_STATE_CHANGE(BT_STATE_XACTION_START,
 				SI_SM_CALL_WITH_DELAY);
 
-	/* Get BT Capabilities, using timing of upper level state machine.
-	   Set outreqs to prevent infinite loop on timeout. */
+	/*
+	 * Get BT Capabilities, using timing of upper level state machine.
+	 * Set outreqs to prevent infinite loop on timeout.
+	 */
 	case BT_STATE_CAPABILITIES_BEGIN:
 		bt->BT_CAP_outreqs = 1;
 		{
@@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 
 static int bt_detect(struct si_sm_data *bt)
 {
-	/* It's impossible for the BT status and interrupt registers to be
-	   all 1's, (assuming a properly functioning, self-initialized BMC)
-	   but that's what you get from reading a bogus address, so we
-	   test that first.  The calling routine uses negative logic. */
+	/*
+	 * It's impossible for the BT status and interrupt registers to be
+	 * all 1's, (assuming a properly functioning, self-initialized BMC)
+	 * but that's what you get from reading a bogus address, so we
+	 * test that first.  The calling routine uses negative logic.
+	 */
 
 	if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
 		return 1;
@@ -658,8 +694,7 @@ static int bt_size(void)
 	return sizeof(struct si_sm_data);
 }
 
-struct si_sm_handlers bt_smi_handlers =
-{
+struct si_sm_handlers bt_smi_handlers = {
 	.init_data		= bt_init_data,
 	.start_transaction	= bt_start_transaction,
 	.get_result		= bt_get_result,