Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1001 insertions, 0 deletions

diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
new file mode 100644
index 0000000..204a730
--- /dev/null
+++ b/drivers/char/generic_serial.c
@@ -0,0 +1,1001 @@
+/*
+ *  generic_serial.c
+ *
+ *  Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl
+ *
+ *  written for the SX serial driver.
+ *     Contains the code that should be shared over all the serial drivers.
+ *
+ *  Credit for the idea to do it this way might go to Alan Cox. 
+ *
+ *
+ *  Version 0.1 -- December, 1998. Initial version.
+ *  Version 0.2 -- March, 1999.    Some more routines. Bugfixes. Etc.
+ *  Version 0.5 -- August, 1999.   Some more fixes. Reformat for Linus.
+ *
+ *  BitWizard is actively maintaining this file. We sometimes find
+ *  that someone submitted changes to this file. We really appreciate
+ *  your help, but please submit changes through us. We're doing our
+ *  best to be responsive.  -- REW
+ * */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/generic_serial.h>
+#include <linux/interrupt.h>
+#include <linux/tty_flip.h>
+#include <linux/delay.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+
+#define DEBUG 
+
+static char *                  tmp_buf; 
+static DECLARE_MUTEX(tmp_buf_sem);
+
+static int gs_debug;
+
+#ifdef DEBUG
+#define gs_dprintk(f, str...) if (gs_debug & f) printk (str)
+#else
+#define gs_dprintk(f, str...) /* nothing */
+#endif
+
+#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __FUNCTION__)
+#define func_exit()  gs_dprintk (GS_DEBUG_FLOW, "gs: exit  %s\n", __FUNCTION__)
+#define NEW_WRITE_LOCKING 1
+#if NEW_WRITE_LOCKING
+#define DECL      /* Nothing */
+#define LOCKIT    down (& port->port_write_sem);
+#define RELEASEIT up (&port->port_write_sem);
+#else
+#define DECL      unsigned long flags;
+#define LOCKIT    save_flags (flags);cli ()
+#define RELEASEIT restore_flags (flags)
+#endif
+
+#define RS_EVENT_WRITE_WAKEUP	1
+
+module_param(gs_debug, int, 0644);
+
+
+void gs_put_char(struct tty_struct * tty, unsigned char ch)
+{
+	struct gs_port *port;
+	DECL
+
+	func_enter (); 
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+
+	if (! (port->flags & ASYNC_INITIALIZED)) return;
+
+	/* Take a lock on the serial tranmit buffer! */
+	LOCKIT;
+
+	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
+		/* Sorry, buffer is full, drop character. Update statistics???? -- REW */
+		RELEASEIT;
+		return;
+	}
+
+	port->xmit_buf[port->xmit_head++] = ch;
+	port->xmit_head &= SERIAL_XMIT_SIZE - 1;
+	port->xmit_cnt++;  /* Characters in buffer */
+
+	RELEASEIT;
+	func_exit ();
+}
+
+
+#ifdef NEW_WRITE_LOCKING
+
+/*
+> Problems to take into account are:
+>       -1- Interrupts that empty part of the buffer.
+>       -2- page faults on the access to userspace. 
+>       -3- Other processes that are also trying to do a "write". 
+*/
+
+int gs_write(struct tty_struct * tty, 
+                    const unsigned char *buf, int count)
+{
+	struct gs_port *port;
+	int c, total = 0;
+	int t;
+
+	func_enter ();
+
+	if (!tty) return 0;
+
+	port = tty->driver_data;
+
+	if (!port) return 0;
+
+	if (! (port->flags & ASYNC_INITIALIZED))
+		return 0;
+
+	/* get exclusive "write" access to this port (problem 3) */
+	/* This is not a spinlock because we can have a disk access (page 
+		 fault) in copy_from_user */
+	down (& port->port_write_sem);
+
+	while (1) {
+
+		c = count;
+ 
+		/* This is safe because we "OWN" the "head". Noone else can 
+		   change the "head": we own the port_write_sem. */
+		/* Don't overrun the end of the buffer */
+		t = SERIAL_XMIT_SIZE - port->xmit_head;
+		if (t < c) c = t;
+ 
+		/* This is safe because the xmit_cnt can only decrease. This 
+		   would increase "t", so we might copy too little chars. */
+		/* Don't copy past the "head" of the buffer */
+		t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt;
+		if (t < c) c = t;
+ 
+		/* Can't copy more? break out! */
+		if (c <= 0) break;
+
+		memcpy (port->xmit_buf + port->xmit_head, buf, c);
+
+		port -> xmit_cnt += c;
+		port -> xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE -1);
+		buf += c;
+		count -= c;
+		total += c;
+	}
+	up (& port->port_write_sem);
+
+	gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n", 
+	            (port->flags & GS_TX_INTEN)?"enabled": "disabled"); 
+
+	if (port->xmit_cnt && 
+	    !tty->stopped && 
+	    !tty->hw_stopped &&
+	    !(port->flags & GS_TX_INTEN)) {
+		port->flags |= GS_TX_INTEN;
+		port->rd->enable_tx_interrupts (port);
+	}
+	func_exit ();
+	return total;
+}
+#else
+/*
+> Problems to take into account are:
+>       -1- Interrupts that empty part of the buffer.
+>       -2- page faults on the access to userspace. 
+>       -3- Other processes that are also trying to do a "write". 
+*/
+
+int gs_write(struct tty_struct * tty,
+                    const unsigned char *buf, int count)
+{
+	struct gs_port *port;
+	int c, total = 0;
+	int t;
+	unsigned long flags;
+
+	func_enter ();
+
+	/* The standard serial driver returns 0 in this case. 
+	   That sounds to me as "No error, I just didn't get to writing any
+	   bytes. Feel free to try again." 
+	   The "official" way to write n bytes from buf is:
+
+		 for (nwritten = 0;nwritten < n;nwritten += rv) {
+			 rv = write (fd, buf+nwritten, n-nwritten);
+			 if (rv < 0) break; // Error: bail out. //
+		 } 
+
+	   which will loop endlessly in this case. The manual page for write
+	   agrees with me. In practise almost everybody writes 
+	   "write (fd, buf,n);" but some people might have had to deal with 
+	   incomplete writes in the past and correctly implemented it by now... 
+	 */
+
+	if (!tty) return -EIO;
+
+	port = tty->driver_data;
+	if (!port || !port->xmit_buf || !tmp_buf)
+		return -EIO;
+
+	local_save_flags(flags);
+	while (1) {
+		cli();
+		c = count;
+
+		/* This is safe because we "OWN" the "head". Noone else can 
+		   change the "head": we own the port_write_sem. */
+		/* Don't overrun the end of the buffer */
+		t = SERIAL_XMIT_SIZE - port->xmit_head;
+		if (t < c) c = t;
+
+		/* This is safe because the xmit_cnt can only decrease. This 
+		   would increase "t", so we might copy too little chars. */
+		/* Don't copy past the "head" of the buffer */
+		t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt;
+		if (t < c) c = t;
+
+		/* Can't copy more? break out! */
+		if (c <= 0) {
+			local_restore_flags(flags);
+			break;
+		}
+		memcpy(port->xmit_buf + port->xmit_head, buf, c);
+		port->xmit_head = ((port->xmit_head + c) &
+		                   (SERIAL_XMIT_SIZE-1));
+		port->xmit_cnt += c;
+		local_restore_flags(flags);
+		buf += c;
+		count -= c;
+		total += c;
+	}
+
+	if (port->xmit_cnt && 
+	    !tty->stopped && 
+	    !tty->hw_stopped &&
+	    !(port->flags & GS_TX_INTEN)) {
+		port->flags |= GS_TX_INTEN;
+		port->rd->enable_tx_interrupts (port);
+	}
+	func_exit ();
+	return total;
+}
+
+#endif
+
+
+
+int gs_write_room(struct tty_struct * tty)
+{
+	struct gs_port *port = tty->driver_data;
+	int ret;
+
+	func_enter ();
+	ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
+	if (ret < 0)
+		ret = 0;
+	func_exit ();
+	return ret;
+}
+
+
+int gs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct gs_port *port = tty->driver_data;
+	func_enter ();
+
+	func_exit ();
+	return port->xmit_cnt;
+}
+
+
+static int gs_real_chars_in_buffer(struct tty_struct *tty)
+{
+	struct gs_port *port;
+	func_enter ();
+
+	if (!tty) return 0;
+	port = tty->driver_data;
+
+	if (!port->rd) return 0;
+	if (!port->rd->chars_in_buffer) return 0;
+
+	func_exit ();
+	return port->xmit_cnt + port->rd->chars_in_buffer (port);
+}
+
+
+static int gs_wait_tx_flushed (void * ptr, unsigned long timeout) 
+{
+	struct gs_port *port = ptr;
+	unsigned long end_jiffies;
+	int jiffies_to_transmit, charsleft = 0, rv = 0;
+	int rcib;
+
+	func_enter();
+
+	gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port);
+	if (port) {
+		gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n", 
+		port->xmit_cnt, port->xmit_buf, port->tty);
+	}
+
+	if (!port || port->xmit_cnt < 0 || !port->xmit_buf) {
+		gs_dprintk (GS_DEBUG_FLUSH, "ERROR: !port, !port->xmit_buf or prot->xmit_cnt < 0.\n");
+		func_exit();
+		return -EINVAL;  /* This is an error which we don't know how to handle. */
+	}
+
+	rcib = gs_real_chars_in_buffer(port->tty);
+
+	if(rcib <= 0) {
+		gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n");
+		func_exit();
+		return rv;
+	}
+	/* stop trying: now + twice the time it would normally take +  seconds */
+	if (timeout == 0) timeout = MAX_SCHEDULE_TIMEOUT;
+	end_jiffies  = jiffies; 
+	if (timeout !=  MAX_SCHEDULE_TIMEOUT)
+		end_jiffies += port->baud?(2 * rcib * 10 * HZ / port->baud):0;
+	end_jiffies += timeout;
+
+	gs_dprintk (GS_DEBUG_FLUSH, "now=%lx, end=%lx (%ld).\n", 
+		    jiffies, end_jiffies, end_jiffies-jiffies); 
+
+	/* the expression is actually jiffies < end_jiffies, but that won't
+	   work around the wraparound. Tricky eh? */
+	while ((charsleft = gs_real_chars_in_buffer (port->tty)) &&
+	        time_after (end_jiffies, jiffies)) {
+		/* Units check: 
+		   chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies!
+		   check! */
+
+		charsleft += 16; /* Allow 16 chars more to be transmitted ... */
+		jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0;
+		/*                                ^^^ Round up.... */
+		if (jiffies_to_transmit <= 0) jiffies_to_transmit = 1;
+
+		gs_dprintk (GS_DEBUG_FLUSH, "Expect to finish in %d jiffies "
+			    "(%d chars).\n", jiffies_to_transmit, charsleft); 
+
+		msleep_interruptible(jiffies_to_msecs(jiffies_to_transmit));
+		if (signal_pending (current)) {
+			gs_dprintk (GS_DEBUG_FLUSH, "Signal pending. Bombing out: "); 
+			rv = -EINTR;
+			break;
+		}
+	}
+
+	gs_dprintk (GS_DEBUG_FLUSH, "charsleft = %d.\n", charsleft); 
+	set_current_state (TASK_RUNNING);
+
+	func_exit();
+	return rv;
+}
+
+
+
+void gs_flush_buffer(struct tty_struct *tty)
+{
+	struct gs_port *port;
+	unsigned long flags;
+
+	func_enter ();
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+
+	/* XXX Would the write semaphore do? */
+	spin_lock_irqsave (&port->driver_lock, flags);
+	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+	spin_unlock_irqrestore (&port->driver_lock, flags);
+
+	wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
+	func_exit ();
+}
+
+
+void gs_flush_chars(struct tty_struct * tty)
+{
+	struct gs_port *port;
+
+	func_enter ();
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+
+	if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+	    !port->xmit_buf) {
+		func_exit ();
+		return;
+	}
+
+	/* Beats me -- REW */
+	port->flags |= GS_TX_INTEN;
+	port->rd->enable_tx_interrupts (port);
+	func_exit ();
+}
+
+
+void gs_stop(struct tty_struct * tty)
+{
+	struct gs_port *port;
+
+	func_enter ();
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+
+	if (port->xmit_cnt && 
+	    port->xmit_buf && 
+	    (port->flags & GS_TX_INTEN) ) {
+		port->flags &= ~GS_TX_INTEN;
+		port->rd->disable_tx_interrupts (port);
+	}
+	func_exit ();
+}
+
+
+void gs_start(struct tty_struct * tty)
+{
+	struct gs_port *port;
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+
+	if (port->xmit_cnt && 
+	    port->xmit_buf && 
+	    !(port->flags & GS_TX_INTEN) ) {
+		port->flags |= GS_TX_INTEN;
+		port->rd->enable_tx_interrupts (port);
+	}
+	func_exit ();
+}
+
+
+static void gs_shutdown_port (struct gs_port *port)
+{
+	unsigned long flags;
+
+	func_enter();
+	
+	if (!port) return;
+	
+	if (!(port->flags & ASYNC_INITIALIZED))
+		return;
+
+	spin_lock_irqsave(&port->driver_lock, flags);
+
+	if (port->xmit_buf) {
+		free_page((unsigned long) port->xmit_buf);
+		port->xmit_buf = NULL;
+	}
+
+	if (port->tty)
+		set_bit(TTY_IO_ERROR, &port->tty->flags);
+
+	port->rd->shutdown_port (port);
+
+	port->flags &= ~ASYNC_INITIALIZED;
+	spin_unlock_irqrestore(&port->driver_lock, flags);
+
+	func_exit();
+}
+
+
+void gs_hangup(struct tty_struct *tty)
+{
+	struct gs_port   *port;
+
+	func_enter ();
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+	tty = port->tty;
+	if (!tty) 
+		return;
+
+	gs_shutdown_port (port);
+	port->flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE);
+	port->tty = NULL;
+	port->count = 0;
+
+	wake_up_interruptible(&port->open_wait);
+	func_exit ();
+}
+
+
+int gs_block_til_ready(void *port_, struct file * filp)
+{
+	struct gs_port *port = port_;
+	DECLARE_WAITQUEUE(wait, current);
+	int    retval;
+	int    do_clocal = 0;
+	int    CD;
+	struct tty_struct *tty;
+	unsigned long flags;
+
+	func_enter ();
+
+	if (!port) return 0;
+
+	tty = port->tty;
+
+	if (!tty) return 0;
+
+	gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); 
+	/*
+	 * If the device is in the middle of being closed, then block
+	 * until it's done, and then try again.
+	 */
+	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+		interruptible_sleep_on(&port->close_wait);
+		if (port->flags & ASYNC_HUP_NOTIFY)
+			return -EAGAIN;
+		else
+			return -ERESTARTSYS;
+	}
+
+	gs_dprintk (GS_DEBUG_BTR, "after hung up\n"); 
+
+	/*
+	 * If non-blocking mode is set, or the port is not enabled,
+	 * then make the check up front and then exit.
+	 */
+	if ((filp->f_flags & O_NONBLOCK) ||
+	    (tty->flags & (1 << TTY_IO_ERROR))) {
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	gs_dprintk (GS_DEBUG_BTR, "after nonblock\n"); 
+ 
+	if (C_CLOCAL(tty))
+		do_clocal = 1;
+
+	/*
+	 * Block waiting for the carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, port->count is dropped by one, so that
+	 * rs_close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+	retval = 0;
+
+	add_wait_queue(&port->open_wait, &wait);
+
+	gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); 
+	spin_lock_irqsave(&port->driver_lock, flags);
+	if (!tty_hung_up_p(filp)) {
+		port->count--;
+	}
+	spin_unlock_irqrestore(&port->driver_lock, flags);
+	port->blocked_open++;
+	while (1) {
+		CD = port->rd->get_CD (port);
+		gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD);
+		set_current_state (TASK_INTERRUPTIBLE);
+		if (tty_hung_up_p(filp) ||
+		    !(port->flags & ASYNC_INITIALIZED)) {
+			if (port->flags & ASYNC_HUP_NOTIFY)
+				retval = -EAGAIN;
+			else
+				retval = -ERESTARTSYS;
+			break;
+		}
+		if (!(port->flags & ASYNC_CLOSING) &&
+		    (do_clocal || CD))
+			break;
+		gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", 
+		(int)signal_pending (current), *(long*)(&current->blocked)); 
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+		schedule();
+	}
+	gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n",
+		    port->blocked_open);
+	set_current_state (TASK_RUNNING);
+	remove_wait_queue(&port->open_wait, &wait);
+	if (!tty_hung_up_p(filp)) {
+		port->count++;
+	}
+	port->blocked_open--;
+	if (retval)
+		return retval;
+
+	port->flags |= ASYNC_NORMAL_ACTIVE;
+	func_exit ();
+	return 0;
+}			 
+
+
+void gs_close(struct tty_struct * tty, struct file * filp)
+{
+	unsigned long flags;
+	struct gs_port *port;
+	
+	func_enter ();
+
+	if (!tty) return;
+
+	port = (struct gs_port *) tty->driver_data;
+
+	if (!port) return;
+
+	if (!port->tty) {
+		/* This seems to happen when this is called from vhangup. */
+		gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->tty is NULL\n");
+		port->tty = tty;
+	}
+
+	spin_lock_irqsave(&port->driver_lock, flags);
+
+	if (tty_hung_up_p(filp)) {
+		spin_unlock_irqrestore(&port->driver_lock, flags);
+		if (port->rd->hungup)
+			port->rd->hungup (port);
+		func_exit ();
+		return;
+	}
+
+	if ((tty->count == 1) && (port->count != 1)) {
+		printk(KERN_ERR "gs: gs_close port %p: bad port count;"
+		       " tty->count is 1, port count is %d\n", port, port->count);
+		port->count = 1;
+	}
+	if (--port->count < 0) {
+		printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->count);
+		port->count = 0;
+	}
+
+	if (port->count) {
+		gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->count);
+		spin_unlock_irqrestore(&port->driver_lock, flags);
+		func_exit ();
+		return;
+	}
+	port->flags |= ASYNC_CLOSING;
+
+	/*
+	 * Now we wait for the transmit buffer to clear; and we notify 
+	 * the line discipline to only process XON/XOFF characters.
+	 */
+	tty->closing = 1;
+	/* if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+	   tty_wait_until_sent(tty, port->closing_wait); */
+
+	/*
+	 * At this point we stop accepting input.  To do this, we
+	 * disable the receive line status interrupts, and tell the
+	 * interrupt driver to stop checking the data ready bit in the
+	 * line status register.
+	 */
+
+	port->rd->disable_rx_interrupts (port);
+	spin_unlock_irqrestore(&port->driver_lock, flags);
+
+	/* close has no way of returning "EINTR", so discard return value */
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		gs_wait_tx_flushed (port, port->closing_wait);
+
+	port->flags &= ~GS_ACTIVE;
+
+	if (tty->driver->flush_buffer)
+		tty->driver->flush_buffer(tty);
+
+	tty_ldisc_flush(tty);
+	tty->closing = 0;
+
+	port->event = 0;
+	port->rd->close (port);
+	port->rd->shutdown_port (port);
+	port->tty = NULL;
+
+	if (port->blocked_open) {
+		if (port->close_delay) {
+			spin_unlock_irqrestore(&port->driver_lock, flags);
+			msleep_interruptible(jiffies_to_msecs(port->close_delay));
+			spin_lock_irqsave(&port->driver_lock, flags);
+		}
+		wake_up_interruptible(&port->open_wait);
+	}
+	port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED);
+	wake_up_interruptible(&port->close_wait);
+
+	func_exit ();
+}
+
+
+static unsigned int     gs_baudrates[] = {
+  0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+  9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
+};
+
+
+void gs_set_termios (struct tty_struct * tty, 
+                     struct termios * old_termios)
+{
+	struct gs_port *port;
+	int baudrate, tmp, rv;
+	struct termios *tiosp;
+
+	func_enter();
+
+	if (!tty) return;
+
+	port = tty->driver_data;
+
+	if (!port) return;
+	if (!port->tty) {
+		/* This seems to happen when this is called after gs_close. */
+		gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->tty is NULL\n");
+		port->tty = tty;
+	}
+
+
+	tiosp = tty->termios;
+
+	if (gs_debug & GS_DEBUG_TERMIOS) {
+		gs_dprintk (GS_DEBUG_TERMIOS, "termios structure (%p):\n", tiosp);
+	}
+
+#if 0
+	/* This is an optimization that is only allowed for dumb cards */
+	/* Smart cards require knowledge of iflags and oflags too: that 
+	   might change hardware cooking mode.... */
+#endif
+	if (old_termios) {
+		if(   (tiosp->c_iflag == old_termios->c_iflag)
+		   && (tiosp->c_oflag == old_termios->c_oflag)
+		   && (tiosp->c_cflag == old_termios->c_cflag)
+		   && (tiosp->c_lflag == old_termios->c_lflag)
+		   && (tiosp->c_line  == old_termios->c_line)
+		   && (memcmp(tiosp->c_cc, old_termios->c_cc, NCC) == 0)) {
+			gs_dprintk(GS_DEBUG_TERMIOS, "gs_set_termios: optimized away\n");
+			return /* 0 */;
+		}
+	} else 
+		gs_dprintk(GS_DEBUG_TERMIOS, "gs_set_termios: no old_termios: "
+		           "no optimization\n");
+
+	if(old_termios && (gs_debug & GS_DEBUG_TERMIOS)) {
+		if(tiosp->c_iflag != old_termios->c_iflag)  printk("c_iflag changed\n");
+		if(tiosp->c_oflag != old_termios->c_oflag)  printk("c_oflag changed\n");
+		if(tiosp->c_cflag != old_termios->c_cflag)  printk("c_cflag changed\n");
+		if(tiosp->c_lflag != old_termios->c_lflag)  printk("c_lflag changed\n");
+		if(tiosp->c_line  != old_termios->c_line)   printk("c_line changed\n");
+		if(!memcmp(tiosp->c_cc, old_termios->c_cc, NCC)) printk("c_cc changed\n");
+	}
+
+	baudrate = tiosp->c_cflag & CBAUD;
+	if (baudrate & CBAUDEX) {
+		baudrate &= ~CBAUDEX;
+		if ((baudrate < 1) || (baudrate > 4))
+			tiosp->c_cflag &= ~CBAUDEX;
+		else
+			baudrate += 15;
+	}
+
+	baudrate = gs_baudrates[baudrate];
+	if ((tiosp->c_cflag & CBAUD) == B38400) {
+		if (     (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+			baudrate = 57600;
+		else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+			baudrate = 115200;
+		else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+			baudrate = 230400;
+		else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+			baudrate = 460800;
+		else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+			baudrate = (port->baud_base / port->custom_divisor);
+	}
+
+	/* I recommend using THIS instead of the mess in termios (and
+	   duplicating the above code). Next we should create a clean
+	   interface towards this variable. If your card supports arbitrary
+	   baud rates, (e.g. CD1400 or 16550 based cards) then everything
+	   will be very easy..... */
+	port->baud = baudrate;
+
+	/* Two timer ticks seems enough to wakeup something like SLIP driver */
+	/* Baudrate/10 is cps. Divide by HZ to get chars per tick. */
+	tmp = (baudrate / 10 / HZ) * 2;			 
+
+	if (tmp <                 0) tmp = 0;
+	if (tmp >= SERIAL_XMIT_SIZE) tmp = SERIAL_XMIT_SIZE-1;
+
+	port->wakeup_chars = tmp;
+
+	/* We should really wait for the characters to be all sent before
+	   changing the settings. -- CAL */
+	rv = gs_wait_tx_flushed (port, MAX_SCHEDULE_TIMEOUT);
+	if (rv < 0) return /* rv */;
+
+	rv = port->rd->set_real_termios(port);
+	if (rv < 0) return /* rv */;
+
+	if ((!old_termios || 
+	     (old_termios->c_cflag & CRTSCTS)) &&
+	    !(      tiosp->c_cflag & CRTSCTS)) {
+		tty->stopped = 0;
+		gs_start(tty);
+	}
+
+#ifdef tytso_patch_94Nov25_1726
+	/* This "makes sense", Why is it commented out? */
+
+	if (!(old_termios->c_cflag & CLOCAL) &&
+	    (tty->termios->c_cflag & CLOCAL))
+		wake_up_interruptible(&port->gs.open_wait);
+#endif
+
+	func_exit();
+	return /* 0 */;
+}
+
+
+
+/* Must be called with interrupts enabled */
+int gs_init_port(struct gs_port *port)
+{
+	unsigned long flags;
+	unsigned long page;
+
+	func_enter ();
+
+        if (!tmp_buf) {
+		page = get_zeroed_page(GFP_KERNEL);
+		spin_lock_irqsave (&port->driver_lock, flags); /* Don't expect this to make a difference. */
+		if (tmp_buf)
+			free_page(page);
+		else
+			tmp_buf = (unsigned char *) page;
+		spin_unlock_irqrestore (&port->driver_lock, flags);
+		if (!tmp_buf) {
+			func_exit ();
+			return -ENOMEM;
+		}
+	}
+
+	if (port->flags & ASYNC_INITIALIZED) {
+		func_exit ();
+		return 0;
+	}
+	if (!port->xmit_buf) {
+		/* We may sleep in get_zeroed_page() */
+		unsigned long tmp;
+
+		tmp = get_zeroed_page(GFP_KERNEL);
+		spin_lock_irqsave (&port->driver_lock, flags);
+		if (port->xmit_buf) 
+			free_page (tmp);
+		else
+			port->xmit_buf = (unsigned char *) tmp;
+		spin_unlock_irqrestore(&port->driver_lock, flags);
+		if (!port->xmit_buf) {
+			func_exit ();
+			return -ENOMEM;
+		}
+	}
+
+	spin_lock_irqsave (&port->driver_lock, flags);
+	if (port->tty) 
+		clear_bit(TTY_IO_ERROR, &port->tty->flags);
+	init_MUTEX(&port->port_write_sem);
+	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+	spin_unlock_irqrestore(&port->driver_lock, flags);
+	gs_set_termios(port->tty, NULL);
+	spin_lock_irqsave (&port->driver_lock, flags);
+	port->flags |= ASYNC_INITIALIZED;
+	port->flags &= ~GS_TX_INTEN;
+
+	spin_unlock_irqrestore(&port->driver_lock, flags);
+	func_exit ();
+	return 0;
+}
+
+
+int gs_setserial(struct gs_port *port, struct serial_struct __user *sp)
+{
+	struct serial_struct sio;
+
+	if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
+		return(-EFAULT);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((sio.baud_base != port->baud_base) ||
+		    (sio.close_delay != port->close_delay) ||
+		    ((sio.flags & ~ASYNC_USR_MASK) !=
+		     (port->flags & ~ASYNC_USR_MASK)))
+			return(-EPERM);
+	} 
+
+	port->flags = (port->flags & ~ASYNC_USR_MASK) |
+		(sio.flags & ASYNC_USR_MASK);
+  
+	port->baud_base = sio.baud_base;
+	port->close_delay = sio.close_delay;
+	port->closing_wait = sio.closing_wait;
+	port->custom_divisor = sio.custom_divisor;
+
+	gs_set_termios (port->tty, NULL);
+
+	return 0;
+}
+
+
+/*****************************************************************************/
+
+/*
+ *      Generate the serial struct info.
+ */
+
+int gs_getserial(struct gs_port *port, struct serial_struct __user *sp)
+{
+	struct serial_struct    sio;
+
+	memset(&sio, 0, sizeof(struct serial_struct));
+	sio.flags = port->flags;
+	sio.baud_base = port->baud_base;
+	sio.close_delay = port->close_delay;
+	sio.closing_wait = port->closing_wait;
+	sio.custom_divisor = port->custom_divisor;
+	sio.hub6 = 0;
+
+	/* If you want you can override these. */
+	sio.type = PORT_UNKNOWN;
+	sio.xmit_fifo_size = -1;
+	sio.line = -1;
+	sio.port = -1;
+	sio.irq = -1;
+
+	if (port->rd->getserial)
+		port->rd->getserial (port, &sio);
+
+	if (copy_to_user(sp, &sio, sizeof(struct serial_struct)))
+		return -EFAULT;
+	return 0;
+
+}
+
+
+void gs_got_break(struct gs_port *port)
+{
+	func_enter ();
+
+	tty_insert_flip_char(port->tty, 0, TTY_BREAK);
+	tty_schedule_flip(port->tty);
+	if (port->flags & ASYNC_SAK) {
+		do_SAK (port->tty);
+	}
+
+	func_exit ();
+}
+
+
+EXPORT_SYMBOL(gs_put_char);
+EXPORT_SYMBOL(gs_write);
+EXPORT_SYMBOL(gs_write_room);
+EXPORT_SYMBOL(gs_chars_in_buffer);
+EXPORT_SYMBOL(gs_flush_buffer);
+EXPORT_SYMBOL(gs_flush_chars);
+EXPORT_SYMBOL(gs_stop);
+EXPORT_SYMBOL(gs_start);
+EXPORT_SYMBOL(gs_hangup);
+EXPORT_SYMBOL(gs_block_til_ready);
+EXPORT_SYMBOL(gs_close);
+EXPORT_SYMBOL(gs_set_termios);
+EXPORT_SYMBOL(gs_init_port);
+EXPORT_SYMBOL(gs_setserial);
+EXPORT_SYMBOL(gs_getserial);
+EXPORT_SYMBOL(gs_got_break);
+
+MODULE_LICENSE("GPL");