summaryrefslogtreecommitdiffstats
path: root/drivers/char/drm
diff options
context:
space:
mode:
authorDave Airlie <airlied@starflyer.(none)>2005-08-16 20:43:16 +1000
committerDave Airlie <airlied@linux.ie>2005-08-16 20:43:16 +1000
commit414ed537995617f4cbcab65e193f26a2b2dcfa5e (patch)
tree7bd1b77bfd80819f7253fe4cbdb0c25560d8924c /drivers/char/drm
parent282a16749ba63256bcdce2766817f46aaac4dc20 (diff)
downloadop-kernel-dev-414ed537995617f4cbcab65e193f26a2b2dcfa5e.zip
op-kernel-dev-414ed537995617f4cbcab65e193f26a2b2dcfa5e.tar.gz
drm: add initial r300 3D support.
This adds initial r300 3D support to the radeon DRM. From: Nicolai Haehnle, Vladimir Dergachev, and others. Signed-off-by: David Airlie <airlied@linux.ie>
Diffstat (limited to 'drivers/char/drm')
-rw-r--r--drivers/char/drm/Makefile2
-rw-r--r--drivers/char/drm/drm_pciids.h13
-rw-r--r--drivers/char/drm/r300_cmdbuf.c801
-rw-r--r--drivers/char/drm/r300_reg.h1412
-rw-r--r--drivers/char/drm/radeon_cp.c13
-rw-r--r--drivers/char/drm/radeon_drm.h46
-rw-r--r--drivers/char/drm/radeon_drv.h29
-rw-r--r--drivers/char/drm/radeon_state.c11
8 files changed, 2325 insertions, 2 deletions
diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile
index 1945138..e41060c 100644
--- a/drivers/char/drm/Makefile
+++ b/drivers/char/drm/Makefile
@@ -14,7 +14,7 @@ mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
i810-objs := i810_drv.o i810_dma.o
i830-objs := i830_drv.o i830_dma.o i830_irq.o
i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o
-radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o
ffb-objs := ffb_drv.o ffb_context.o
sis-objs := sis_drv.o sis_ds.o sis_mm.o
savage-objs := savage_drv.o savage_bci.o savage_state.o
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 8e264f9..1874c1f 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -25,6 +25,8 @@
{0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
{0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
{0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
+ {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
+ {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
{0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \
@@ -33,7 +35,17 @@
{0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
{0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
{0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
{0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
{0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
@@ -56,6 +68,7 @@
{0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+ {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
{0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
new file mode 100644
index 0000000..623f1f4
--- /dev/null
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -0,0 +1,801 @@
+/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*-
+ *
+ * Copyright (C) The Weather Channel, Inc. 2002.
+ * Copyright (C) 2004 Nicolai Haehnle.
+ * All Rights Reserved.
+ *
+ * The Weather Channel (TM) funded Tungsten Graphics to develop the
+ * initial release of the Radeon 8500 driver under the XFree86 license.
+ * This notice must be preserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Nicolai Haehnle <prefect_@gmx.net>
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_drm.h"
+#include "radeon_drv.h"
+#include "r300_reg.h"
+
+
+#define R300_SIMULTANEOUS_CLIPRECTS 4
+
+/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects
+ */
+static const int r300_cliprect_cntl[4] = {
+ 0xAAAA,
+ 0xEEEE,
+ 0xFEFE,
+ 0xFFFE
+};
+
+
+/**
+ * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command
+ * buffer, starting with index n.
+ */
+static int r300_emit_cliprects(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ int n)
+{
+ drm_clip_rect_t box;
+ int nr;
+ int i;
+ RING_LOCALS;
+
+ nr = cmdbuf->nbox - n;
+ if (nr > R300_SIMULTANEOUS_CLIPRECTS)
+ nr = R300_SIMULTANEOUS_CLIPRECTS;
+
+ DRM_DEBUG("%i cliprects\n", nr);
+
+ if (nr) {
+ BEGIN_RING(6 + nr*2);
+ OUT_RING( CP_PACKET0( R300_RE_CLIPRECT_TL_0, nr*2 - 1 ) );
+
+ for(i = 0; i < nr; ++i) {
+ if (DRM_COPY_FROM_USER_UNCHECKED(&box, &cmdbuf->boxes[n+i], sizeof(box))) {
+ DRM_ERROR("copy cliprect faulted\n");
+ return DRM_ERR(EFAULT);
+ }
+
+ box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+ box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+ box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+ box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+
+ OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
+ (box.y1 << R300_CLIPRECT_Y_SHIFT));
+ OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
+ (box.y2 << R300_CLIPRECT_Y_SHIFT));
+ }
+
+ OUT_RING_REG( R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr-1] );
+
+ /* TODO/SECURITY: Force scissors to a safe value, otherwise the
+ * client might be able to trample over memory.
+ * The impact should be very limited, but I'd rather be safe than
+ * sorry.
+ */
+ OUT_RING( CP_PACKET0( R300_RE_SCISSORS_TL, 1 ) );
+ OUT_RING( 0 );
+ OUT_RING( R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK );
+ ADVANCE_RING();
+ } else {
+ /* Why we allow zero cliprect rendering:
+ * There are some commands in a command buffer that must be submitted
+ * even when there are no cliprects, e.g. DMA buffer discard
+ * or state setting (though state setting could be avoided by
+ * simulating a loss of context).
+ *
+ * Now since the cmdbuf interface is so chaotic right now (and is
+ * bound to remain that way for a bit until things settle down),
+ * it is basically impossible to filter out the commands that are
+ * necessary and those that aren't.
+ *
+ * So I choose the safe way and don't do any filtering at all;
+ * instead, I simply set up the engine so that all rendering
+ * can't produce any fragments.
+ */
+ BEGIN_RING(2);
+ OUT_RING_REG( R300_RE_CLIPRECT_CNTL, 0 );
+ ADVANCE_RING();
+ }
+
+ return 0;
+}
+
+u8 r300_reg_flags[0x10000>>2];
+
+
+void r300_init_reg_flags(void)
+{
+ int i;
+ memset(r300_reg_flags, 0, 0x10000>>2);
+ #define ADD_RANGE_MARK(reg, count,mark) \
+ for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\
+ r300_reg_flags[i]|=(mark);
+
+ #define MARK_SAFE 1
+ #define MARK_CHECK_OFFSET 2
+
+ #define ADD_RANGE(reg, count) ADD_RANGE_MARK(reg, count, MARK_SAFE)
+
+ /* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */
+ ADD_RANGE(R300_SE_VPORT_XSCALE, 6);
+ ADD_RANGE(0x2080, 1);
+ ADD_RANGE(R300_SE_VTE_CNTL, 2);
+ ADD_RANGE(0x2134, 2);
+ ADD_RANGE(0x2140, 1);
+ ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2);
+ ADD_RANGE(0x21DC, 1);
+ ADD_RANGE(0x221C, 1);
+ ADD_RANGE(0x2220, 4);
+ ADD_RANGE(0x2288, 1);
+ ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
+ ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
+ ADD_RANGE(R300_GB_ENABLE, 1);
+ ADD_RANGE(R300_GB_MSPOS0, 5);
+ ADD_RANGE(R300_TX_ENABLE, 1);
+ ADD_RANGE(0x4200, 4);
+ ADD_RANGE(0x4214, 1);
+ ADD_RANGE(R300_RE_POINTSIZE, 1);
+ ADD_RANGE(0x4230, 3);
+ ADD_RANGE(R300_RE_LINE_CNT, 1);
+ ADD_RANGE(0x4238, 1);
+ ADD_RANGE(0x4260, 3);
+ ADD_RANGE(0x4274, 4);
+ ADD_RANGE(0x4288, 5);
+ ADD_RANGE(0x42A0, 1);
+ ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4);
+ ADD_RANGE(0x42B4, 1);
+ ADD_RANGE(R300_RE_CULL_CNTL, 1);
+ ADD_RANGE(0x42C0, 2);
+ ADD_RANGE(R300_RS_CNTL_0, 2);
+ ADD_RANGE(R300_RS_INTERP_0, 8);
+ ADD_RANGE(R300_RS_ROUTE_0, 8);
+ ADD_RANGE(0x43A4, 2);
+ ADD_RANGE(0x43E8, 1);
+ ADD_RANGE(R300_PFS_CNTL_0, 3);
+ ADD_RANGE(R300_PFS_NODE_0, 4);
+ ADD_RANGE(R300_PFS_TEXI_0, 64);
+ ADD_RANGE(0x46A4, 5);
+ ADD_RANGE(R300_PFS_INSTR0_0, 64);
+ ADD_RANGE(R300_PFS_INSTR1_0, 64);
+ ADD_RANGE(R300_PFS_INSTR2_0, 64);
+ ADD_RANGE(R300_PFS_INSTR3_0, 64);
+ ADD_RANGE(0x4BC0, 1);
+ ADD_RANGE(0x4BC8, 3);
+ ADD_RANGE(R300_PP_ALPHA_TEST, 2);
+ ADD_RANGE(0x4BD8, 1);
+ ADD_RANGE(R300_PFS_PARAM_0_X, 64);
+ ADD_RANGE(0x4E00, 1);
+ ADD_RANGE(R300_RB3D_CBLEND, 2);
+ ADD_RANGE(R300_RB3D_COLORMASK, 1);
+ ADD_RANGE(0x4E10, 3);
+ ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET); /* check offset */
+ ADD_RANGE(R300_RB3D_COLORPITCH0, 1);
+ ADD_RANGE(0x4E50, 9);
+ ADD_RANGE(0x4E88, 1);
+ ADD_RANGE(0x4EA0, 2);
+ ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
+ ADD_RANGE(0x4F10, 4);
+ ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
+ ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
+ ADD_RANGE(0x4F28, 1);
+ ADD_RANGE(0x4F30, 2);
+ ADD_RANGE(0x4F44, 1);
+ ADD_RANGE(0x4F54, 1);
+
+ ADD_RANGE(R300_TX_FILTER_0, 16);
+ ADD_RANGE(R300_TX_UNK1_0, 16);
+ ADD_RANGE(R300_TX_SIZE_0, 16);
+ ADD_RANGE(R300_TX_FORMAT_0, 16);
+ /* Texture offset is dangerous and needs more checking */
+ ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET);
+ ADD_RANGE(R300_TX_UNK4_0, 16);
+ ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
+
+ /* Sporadic registers used as primitives are emitted */
+ ADD_RANGE(0x4f18, 1);
+ ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
+ ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
+ ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
+
+}
+
+static __inline__ int r300_check_range(unsigned reg, int count)
+{
+ int i;
+ if(reg & ~0xffff)return -1;
+ for(i=(reg>>2);i<(reg>>2)+count;i++)
+ if(r300_reg_flags[i]!=MARK_SAFE)return 1;
+ return 0;
+}
+
+ /* we expect offsets passed to the framebuffer to be either within video memory or
+ within AGP space */
+static __inline__ int r300_check_offset(drm_radeon_private_t* dev_priv, u32 offset)
+{
+ /* we realy want to check against end of video aperture
+ but this value is not being kept.
+ This code is correct for now (does the same thing as the
+ code that sets MC_FB_LOCATION) in radeon_cp.c */
+ if((offset>=dev_priv->fb_location) &&
+ (offset<dev_priv->gart_vm_start))return 0;
+ if((offset>=dev_priv->gart_vm_start) &&
+ (offset<dev_priv->gart_vm_start+dev_priv->gart_size))return 0;
+ return 1;
+}
+
+static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int reg;
+ int sz;
+ int i;
+ int values[64];
+ RING_LOCALS;
+
+ sz = header.packet0.count;
+ reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+
+ if((sz>64)||(sz<0)){
+ DRM_ERROR("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n", reg, sz);
+ return DRM_ERR(EINVAL);
+ }
+ for(i=0;i<sz;i++){
+ values[i]=((int __user*)cmdbuf->buf)[i];
+ switch(r300_reg_flags[(reg>>2)+i]){
+ case MARK_SAFE:
+ break;
+ case MARK_CHECK_OFFSET:
+ if(r300_check_offset(dev_priv, (u32)values[i])){
+ DRM_ERROR("Offset failed range check (reg=%04x sz=%d)\n", reg, sz);
+ return DRM_ERR(EINVAL);
+ }
+ break;
+ default:
+ DRM_ERROR("Register %04x failed check as flag=%02x\n", reg+i*4, r300_reg_flags[(reg>>2)+i]);
+ return DRM_ERR(EINVAL);
+ }
+ }
+
+ BEGIN_RING(1+sz);
+ OUT_RING( CP_PACKET0( reg, sz-1 ) );
+ OUT_RING_TABLE( values, sz );
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz*4;
+ cmdbuf->bufsz -= sz*4;
+
+ return 0;
+}
+
+/**
+ * Emits a packet0 setting arbitrary registers.
+ * Called by r300_do_cp_cmdbuf.
+ *
+ * Note that checks are performed on contents and addresses of the registers
+ */
+static __inline__ int r300_emit_packet0(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int reg;
+ int sz;
+ RING_LOCALS;
+
+ sz = header.packet0.count;
+ reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+
+ if (!sz)
+ return 0;
+
+ if (sz*4 > cmdbuf->bufsz)
+ return DRM_ERR(EINVAL);
+
+ if (reg+sz*4 >= 0x10000){
+ DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg, sz);
+ return DRM_ERR(EINVAL);
+ }
+
+ if(r300_check_range(reg, sz)){
+ /* go and check everything */
+ return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf, header);
+ }
+ /* the rest of the data is safe to emit, whatever the values the user passed */
+
+ BEGIN_RING(1+sz);
+ OUT_RING( CP_PACKET0( reg, sz-1 ) );
+ OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz );
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz*4;
+ cmdbuf->bufsz -= sz*4;
+
+ return 0;
+}
+
+
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_vpu(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int sz;
+ int addr;
+ RING_LOCALS;
+
+ sz = header.vpu.count;
+ addr = (header.vpu.adrhi << 8) | header.vpu.adrlo;
+
+ if (!sz)
+ return 0;
+ if (sz*16 > cmdbuf->bufsz)
+ return DRM_ERR(EINVAL);
+
+ BEGIN_RING(5+sz*4);
+ /* Wait for VAP to come to senses.. */
+ /* there is no need to emit it multiple times, (only once before VAP is programmed,
+ but this optimization is for later */
+ OUT_RING_REG( R300_VAP_PVS_WAITIDLE, 0 );
+ OUT_RING_REG( R300_VAP_PVS_UPLOAD_ADDRESS, addr );
+ OUT_RING( CP_PACKET0_TABLE( R300_VAP_PVS_UPLOAD_DATA, sz*4 - 1 ) );
+ OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz*4 );
+
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz*16;
+ cmdbuf->bufsz -= sz*16;
+
+ return 0;
+}
+
+
+/**
+ * Emit a clear packet from userspace.
+ * Called by r300_emit_packet3.
+ */
+static __inline__ int r300_emit_clear(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf)
+{
+ RING_LOCALS;
+
+ if (8*4 > cmdbuf->bufsz)
+ return DRM_ERR(EINVAL);
+
+ BEGIN_RING(10);
+ OUT_RING( CP_PACKET3( R200_3D_DRAW_IMMD_2, 8 ) );
+ OUT_RING( R300_PRIM_TYPE_POINT|R300_PRIM_WALK_RING|
+ (1<<R300_PRIM_NUM_VERTICES_SHIFT) );
+ OUT_RING_TABLE( (int __user*)cmdbuf->buf, 8 );
+ ADVANCE_RING();
+
+ cmdbuf->buf += 8*4;
+ cmdbuf->bufsz -= 8*4;
+
+ return 0;
+}
+
+static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ u32 header)
+{
+ int count, i,k;
+ #define MAX_ARRAY_PACKET 64
+ u32 payload[MAX_ARRAY_PACKET];
+ u32 narrays;
+ RING_LOCALS;
+
+ count=(header>>16) & 0x3fff;
+
+ if((count+1)>MAX_ARRAY_PACKET){
+ DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", count);
+ return DRM_ERR(EINVAL);
+ }
+ memset(payload, 0, MAX_ARRAY_PACKET*4);
+ memcpy(payload, cmdbuf->buf+4, (count+1)*4);
+
+ /* carefully check packet contents */
+
+ narrays=payload[0];
+ k=0;
+ i=1;
+ while((k<narrays) && (i<(count+1))){
+ i++; /* skip attribute field */
+ if(r300_check_offset(dev_priv, payload[i])){
+ DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i);
+ return DRM_ERR(EINVAL);
+ }
+ k++;
+ i++;
+ if(k==narrays)break;
+ /* have one more to process, they come in pairs */
+ if(r300_check_offset(dev_priv, payload[i])){
+ DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i);
+ return DRM_ERR(EINVAL);
+ }
+ k++;
+ i++;
+ }
+ /* do the counts match what we expect ? */
+ if((k!=narrays) || (i!=(count+1))){
+ DRM_ERROR("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n", k, i, narrays, count+1);
+ return DRM_ERR(EINVAL);
+ }
+
+ /* all clear, output packet */
+
+ BEGIN_RING(count+2);
+ OUT_RING(header);
+ OUT_RING_TABLE(payload, count+1);
+ ADVANCE_RING();
+
+ cmdbuf->buf += (count+2)*4;
+ cmdbuf->bufsz -= (count+2)*4;
+
+ return 0;
+}
+
+static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf)
+{
+ u32 header;
+ int count;
+ RING_LOCALS;
+
+ if (4 > cmdbuf->bufsz)
+ return DRM_ERR(EINVAL);
+
+ /* Fixme !! This simply emits a packet without much checking.
+ We need to be smarter. */
+
+ /* obtain first word - actual packet3 header */
+ header = *(u32 __user*)cmdbuf->buf;
+
+ /* Is it packet 3 ? */
+ if( (header>>30)!=0x3 ) {
+ DRM_ERROR("Not a packet3 header (0x%08x)\n", header);
+ return DRM_ERR(EINVAL);
+ }
+
+ count=(header>>16) & 0x3fff;
+
+ /* Check again now that we know how much data to expect */
+ if ((count+2)*4 > cmdbuf->bufsz){
+ DRM_ERROR("Expected packet3 of length %d but have only %d bytes left\n",
+ (count+2)*4, cmdbuf->bufsz);
+ return DRM_ERR(EINVAL);
+ }
+
+ /* Is it a packet type we know about ? */
+ switch(header & 0xff00){
+ case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */
+ return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
+
+ case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
+ case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
+ case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
+ case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
+ case RADEON_WAIT_FOR_IDLE:
+ case RADEON_CP_NOP:
+ /* these packets are safe */
+ break;
+ default:
+ DRM_ERROR("Unknown packet3 header (0x%08x)\n", header);
+ return DRM_ERR(EINVAL);
+ }
+
+
+ BEGIN_RING(count+2);
+ OUT_RING(header);
+ OUT_RING_TABLE( (int __user*)(cmdbuf->buf+4), count+1);
+ ADVANCE_RING();
+
+ cmdbuf->buf += (count+2)*4;
+ cmdbuf->bufsz -= (count+2)*4;
+
+ return 0;
+}
+
+
+/**
+ * Emit a rendering packet3 from userspace.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_packet3(drm_radeon_private_t* dev_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int n;
+ int ret;
+ char __user* orig_buf = cmdbuf->buf;
+ int orig_bufsz = cmdbuf->bufsz;
+
+ /* This is a do-while-loop so that we run the interior at least once,
+ * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale.
+ */
+ n = 0;
+ do {
+ if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) {
+ ret = r300_emit_cliprects(dev_priv, cmdbuf, n);
+ if (ret)
+ return ret;
+
+ cmdbuf->buf = orig_buf;
+ cmdbuf->bufsz = orig_bufsz;
+ }
+
+ switch(header.packet3.packet) {
+ case R300_CMD_PACKET3_CLEAR:
+ DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n");
+ ret = r300_emit_clear(dev_priv, cmdbuf);
+ if (ret) {
+ DRM_ERROR("r300_emit_clear failed\n");
+ return ret;
+ }
+ break;
+
+ case R300_CMD_PACKET3_RAW:
+ DRM_DEBUG("R300_CMD_PACKET3_RAW\n");
+ ret = r300_emit_raw_packet3(dev_priv, cmdbuf);
+ if (ret) {
+ DRM_ERROR("r300_emit_raw_packet3 failed\n");
+ return ret;
+ }
+ break;
+
+ default:
+ DRM_ERROR("bad packet3 type %i at %p\n",
+ header.packet3.packet,
+ cmdbuf->buf - sizeof(header));
+ return DRM_ERR(EINVAL);
+ }
+
+ n += R300_SIMULTANEOUS_CLIPRECTS;
+ } while(n < cmdbuf->nbox);
+
+ return 0;
+}
+
+/* Some of the R300 chips seem to be extremely touchy about the two registers
+ * that are configured in r300_pacify.
+ * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace
+ * sends a command buffer that contains only state setting commands and a
+ * vertex program/parameter upload sequence, this will eventually lead to a
+ * lockup, unless the sequence is bracketed by calls to r300_pacify.
+ * So we should take great care to *always* call r300_pacify before
+ * *anything* 3D related, and again afterwards. This is what the
+ * call bracket in r300_do_cp_cmdbuf is for.
+ */
+
+/**
+ * Emit the sequence to pacify R300.
+ */
+static __inline__ void r300_pacify(drm_radeon_private_t* dev_priv)
+{
+ RING_LOCALS;
+
+ BEGIN_RING(6);
+ OUT_RING( CP_PACKET0( R300_RB3D_DSTCACHE_CTLSTAT, 0 ) );
+ OUT_RING( 0xa );
+ OUT_RING( CP_PACKET0( 0x4f18, 0 ) );
+ OUT_RING( 0x3 );
+ OUT_RING( CP_PACKET3( RADEON_CP_NOP, 0 ) );
+ OUT_RING( 0x0 );
+ ADVANCE_RING();
+}
+
+
+/**
+ * Called by r300_do_cp_cmdbuf to update the internal buffer age and state.
+ * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must
+ * be careful about how this function is called.
+ */
+static void r300_discard_buffer(drm_device_t * dev, drm_buf_t * buf)
+{
+ drm_radeon_private_t *dev_priv = dev->dev_private;
+ drm_radeon_buf_priv_t *buf_priv = buf->dev_private;
+
+ buf_priv->age = ++dev_priv->sarea_priv->last_dispatch;
+ buf->pending = 1;
+ buf->used = 0;
+}
+
+
+/**
+ * Parses and validates a user-supplied command buffer and emits appropriate
+ * commands on the DMA ring buffer.
+ * Called by the ioctl handler function radeon_cp_cmdbuf.
+ */
+int r300_do_cp_cmdbuf(drm_device_t* dev,
+ DRMFILE filp,
+ drm_file_t* filp_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf)
+{
+ drm_radeon_private_t *dev_priv = dev->dev_private;
+ drm_device_dma_t *dma = dev->dma;
+ drm_buf_t *buf = NULL;
+ int emit_dispatch_age = 0;
+ int ret = 0;
+
+ DRM_DEBUG("\n");
+
+ /* See the comment above r300_emit_begin3d for why this call must be here,
+ * and what the cleanup gotos are for. */
+ r300_pacify(dev_priv);
+
+ if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
+ ret = r300_emit_cliprects(dev_priv, cmdbuf, 0);
+ if (ret)
+ goto cleanup;
+ }
+
+ while(cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) {
+ int idx;
+ drm_r300_cmd_header_t header;
+
+ header.u = *(unsigned int *)cmdbuf->buf;
+
+ cmdbuf->buf += sizeof(header);
+ cmdbuf->bufsz -= sizeof(header);
+
+ switch(header.header.cmd_type) {
+ case R300_CMD_PACKET0:
+ DRM_DEBUG("R300_CMD_PACKET0\n");
+ ret = r300_emit_packet0(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_packet0 failed\n");
+ goto cleanup;
+ }
+ break;
+
+ case R300_CMD_VPU:
+ DRM_DEBUG("R300_CMD_VPU\n");
+ ret = r300_emit_vpu(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_vpu failed\n");
+ goto cleanup;
+ }
+ break;
+
+ case R300_CMD_PACKET3:
+ DRM_DEBUG("R300_CMD_PACKET3\n");
+ ret = r300_emit_packet3(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_packet3 failed\n");
+ goto cleanup;
+ }
+ break;
+
+ case R300_CMD_END3D:
+ DRM_DEBUG("R300_CMD_END3D\n");
+ /* TODO:
+ Ideally userspace driver should not need to issue this call,
+ i.e. the drm driver should issue it automatically and prevent
+ lockups.
+
+ In practice, we do not understand why this call is needed and what
+ it does (except for some vague guesses that it has to do with cache
+ coherence) and so the user space driver does it.
+
+ Once we are sure which uses prevent lockups the code could be moved
+ into the kernel and the userspace driver will not
+ need to use this command.
+
+ Note that issuing this command does not hurt anything
+ except, possibly, performance */
+ r300_pacify(dev_priv);
+ break;
+
+ case R300_CMD_CP_DELAY:
+ /* simple enough, we can do it here */
+ DRM_DEBUG("R300_CMD_CP_DELAY\n");
+ {
+ int i;
+ RING_LOCALS;
+
+ BEGIN_RING(header.delay.count);
+ for(i=0;i<header.delay.count;i++)
+ OUT_RING(RADEON_CP_PACKET2);
+ ADVANCE_RING();
+ }
+ break;
+
+ case R300_CMD_DMA_DISCARD:
+ DRM_DEBUG("RADEON_CMD_DMA_DISCARD\n");
+ idx = header.dma.buf_idx;
+ if (idx < 0 || idx >= dma->buf_count) {
+ DRM_ERROR("buffer index %d (of %d max)\n",
+ idx, dma->buf_count - 1);
+ ret = DRM_ERR(EINVAL);
+ goto cleanup;
+ }
+
+ buf = dma->buflist[idx];
+ if (buf->filp != filp || buf->pending) {
+ DRM_ERROR("bad buffer %p %p %d\n",
+ buf->filp, filp, buf->pending);
+ ret = DRM_ERR(EINVAL);
+ goto cleanup;
+ }
+
+ emit_dispatch_age = 1;
+ r300_discard_buffer(dev, buf);
+ break;
+
+ case R300_CMD_WAIT:
+ /* simple enough, we can do it here */
+ DRM_DEBUG("R300_CMD_WAIT\n");
+ if(header.wait.flags==0)break; /* nothing to do */
+
+ {
+ RING_LOCALS;
+
+ BEGIN_RING(2);
+ OUT_RING( CP_PACKET0( RADEON_WAIT_UNTIL, 0 ) );
+ OUT_RING( (header.wait.flags & 0xf)<<14 );
+ ADVANCE_RING();
+ }
+ break;
+
+ default:
+ DRM_ERROR("bad cmd_type %i at %p\n",
+ header.header.cmd_type,
+ cmdbuf->buf - sizeof(header));
+ ret = DRM_ERR(EINVAL);
+ goto cleanup;
+ }
+ }
+
+ DRM_DEBUG("END\n");
+
+cleanup:
+ r300_pacify(dev_priv);
+
+ /* We emit the vertex buffer age here, outside the pacifier "brackets"
+ * for two reasons:
+ * (1) This may coalesce multiple age emissions into a single one and
+ * (2) more importantly, some chips lock up hard when scratch registers
+ * are written inside the pacifier bracket.
+ */
+ if (emit_dispatch_age) {
+ RING_LOCALS;
+
+ /* Emit the vertex buffer age */
+ BEGIN_RING(2);
+ RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch);
+ ADVANCE_RING();
+ }
+
+ COMMIT_RING();
+
+ return ret;
+}
+
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
new file mode 100644
index 0000000..c3e7ca3
--- /dev/null
+++ b/drivers/char/drm/r300_reg.h
@@ -0,0 +1,1412 @@
+/**************************************************************************
+
+Copyright (C) 2004-2005 Nicolai Haehnle et al.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+on the rights to use, copy, modify, merge, publish, distribute, sub
+license, and/or sell copies of the Software, and to permit persons to whom
+the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next
+paragraph) shall be included in all copies or substantial portions of the
+Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#ifndef _R300_REG_H
+#define _R300_REG_H
+
+#define R300_MC_INIT_MISC_LAT_TIMER 0x180
+# define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT 0
+# define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT 4
+# define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT 8
+# define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT 12
+# define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT 16
+# define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT 20
+# define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT 24
+# define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT 28
+
+
+#define R300_MC_INIT_GFX_LAT_TIMER 0x154
+# define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT 0
+# define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT 4
+# define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT 8
+# define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT 12
+# define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT 16
+# define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT 20
+# define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT 24
+# define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT 28
+
+/*
+This file contains registers and constants for the R300. They have been
+found mostly by examining command buffers captured using glxtest, as well
+as by extrapolating some known registers and constants from the R200.
+
+I am fairly certain that they are correct unless stated otherwise in comments.
+*/
+
+#define R300_SE_VPORT_XSCALE 0x1D98
+#define R300_SE_VPORT_XOFFSET 0x1D9C
+#define R300_SE_VPORT_YSCALE 0x1DA0
+#define R300_SE_VPORT_YOFFSET 0x1DA4
+#define R300_SE_VPORT_ZSCALE 0x1DA8
+#define R300_SE_VPORT_ZOFFSET 0x1DAC
+
+
+/* This register is written directly and also starts data section in many 3d CP_PACKET3's */
+#define R300_VAP_VF_CNTL 0x2084
+
+# define R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT 0
+# define R300_VAP_VF_CNTL__PRIM_NONE (0<<0)
+# define R300_VAP_VF_CNTL__PRIM_POINTS (1<<0)
+# define R300_VAP_VF_CNTL__PRIM_LINES (2<<0)
+# define R300_VAP_VF_CNTL__PRIM_LINE_STRIP (3<<0)
+# define R300_VAP_VF_CNTL__PRIM_TRIANGLES (4<<0)
+# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN (5<<0)
+# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP (6<<0)
+# define R300_VAP_VF_CNTL__PRIM_LINE_LOOP (12<<0)
+# define R300_VAP_VF_CNTL__PRIM_QUADS (13<<0)
+# define R300_VAP_VF_CNTL__PRIM_QUAD_STRIP (14<<0)
+# define R300_VAP_VF_CNTL__PRIM_POLYGON (15<<0)
+
+# define R300_VAP_VF_CNTL__PRIM_WALK__SHIFT 4
+ /* State based - direct writes to registers trigger vertex generation */
+# define R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED (0<<4)
+# define R300_VAP_VF_CNTL__PRIM_WALK_INDICES (1<<4)
+# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST (2<<4)
+# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED (3<<4)
+
+ /* I don't think I saw these three used.. */
+# define R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT 6
+# define R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT 9
+# define R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT 10
+
+ /* index size - when not set the indices are assumed to be 16 bit */
+# define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11)
+ /* number of vertices */
+# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16
+
+/* BEGIN: Wild guesses */
+#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090
+# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0)
+# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_PRESENT (1<<1)
+# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2) /* GUESS */
+# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3) /* GUESS */
+# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4) /* GUESS */
+# define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16) /* GUESS */
+
+#define R300_VAP_OUTPUT_VTX_FMT_1 0x2094
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18
+# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21
+/* END */
+
+#define R300_SE_VTE_CNTL 0x20b0
+# define R300_VPORT_X_SCALE_ENA 0x00000001
+# define R300_VPORT_X_OFFSET_ENA 0x00000002
+# define R300_VPORT_Y_SCALE_ENA 0x00000004
+# define R300_VPORT_Y_OFFSET_ENA 0x00000008
+# define R300_VPORT_Z_SCALE_ENA 0x00000010
+# define R300_VPORT_Z_OFFSET_ENA 0x00000020
+# define R300_VTX_XY_FMT 0x00000100
+# define R300_VTX_Z_FMT 0x00000200
+# define R300_VTX_W0_FMT 0x00000400
+# define R300_VTX_W0_NORMALIZE 0x00000800
+# define R300_VTX_ST_DENORMALIZED 0x00001000
+
+/* BEGIN: Vertex data assembly - lots of uncertainties */
+/* gap */
+/* Where do we get our vertex data?
+//
+// Vertex data either comes either from immediate mode registers or from
+// vertex arrays.
+// There appears to be no mixed mode (though we can force the pitch of
+// vertex arrays to 0, effectively reusing the same element over and over
+// again).
+//
+// Immediate mode is controlled by the INPUT_CNTL registers. I am not sure
+// if these registers influence vertex array processing.
+//
+// Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3.
+//
+// In both cases, vertex attributes are then passed through INPUT_ROUTE.
+
+// Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data
+// into the vertex processor's input registers.
+// The first word routes the first input, the second word the second, etc.
+// The corresponding input is routed into the register with the given index.
+// The list is ended by a word with INPUT_ROUTE_END set.
+//
+// Always set COMPONENTS_4 in immediate mode. */
+
+#define R300_VAP_INPUT_ROUTE_0_0 0x2150
+# define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0)
+# define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0)
+# define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0)
+# define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0)
+# define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */
+# define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8
+# define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */
+# define R300_VAP_INPUT_ROUTE_END (1 << 13)
+# define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */
+# define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */
+# define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */
+# define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */
+#define R300_VAP_INPUT_ROUTE_0_1 0x2154
+#define R300_VAP_INPUT_ROUTE_0_2 0x2158
+#define R300_VAP_INPUT_ROUTE_0_3 0x215C
+#define R300_VAP_INPUT_ROUTE_0_4 0x2160
+#define R300_VAP_INPUT_ROUTE_0_5 0x2164
+#define R300_VAP_INPUT_ROUTE_0_6 0x2168
+#define R300_VAP_INPUT_ROUTE_0_7 0x216C
+
+/* gap */
+/* Notes:
+// - always set up to produce at least two attributes:
+// if vertex program uses only position, fglrx will set normal, too
+// - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal */
+#define R300_VAP_INPUT_CNTL_0 0x2180
+# define R300_INPUT_CNTL_0_COLOR 0x00000001
+#define R300_VAP_INPUT_CNTL_1 0x2184
+# define R300_INPUT_CNTL_POS 0x00000001
+# define R300_INPUT_CNTL_NORMAL 0x00000002
+# define R300_INPUT_CNTL_COLOR 0x00000004
+# define R300_INPUT_CNTL_TC0 0x00000400
+# define R300_INPUT_CNTL_TC1 0x00000800
+# define R300_INPUT_CNTL_TC2 0x00001000 /* GUESS */
+# define R300_INPUT_CNTL_TC3 0x00002000 /* GUESS */
+# define R300_INPUT_CNTL_TC4 0x00004000 /* GUESS */
+# define R300_INPUT_CNTL_TC5 0x00008000 /* GUESS */
+# define R300_INPUT_CNTL_TC6 0x00010000 /* GUESS */
+# define R300_INPUT_CNTL_TC7 0x00020000 /* GUESS */
+
+/* gap */
+/* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0
+// are set to a swizzling bit pattern, other words are 0.
+//
+// In immediate mode, the pattern is always set to xyzw. In vertex array
+// mode, the swizzling pattern is e.g. used to set zw components in texture
+// coordinates with only tweo components. */
+#define R300_VAP_INPUT_ROUTE_1_0 0x21E0
+# define R300_INPUT_ROUTE_SELECT_X 0
+# define R300_INPUT_ROUTE_SELECT_Y 1
+# define R300_INPUT_ROUTE_SELECT_Z 2
+# define R300_INPUT_ROUTE_SELECT_W 3
+# define R300_INPUT_ROUTE_SELECT_ZERO 4
+# define R300_INPUT_ROUTE_SELECT_ONE 5
+# define R300_INPUT_ROUTE_SELECT_MASK 7
+# define R300_INPUT_ROUTE_X_SHIFT 0
+# define R300_INPUT_ROUTE_Y_SHIFT 3
+# define R300_INPUT_ROUTE_Z_SHIFT 6
+# define R300_INPUT_ROUTE_W_SHIFT 9
+# define R300_INPUT_ROUTE_ENABLE (15 << 12)
+#define R300_VAP_INPUT_ROUTE_1_1 0x21E4
+#define R300_VAP_INPUT_ROUTE_1_2 0x21E8
+#define R300_VAP_INPUT_ROUTE_1_3 0x21EC
+#define R300_VAP_INPUT_ROUTE_1_4 0x21F0
+#define R300_VAP_INPUT_ROUTE_1_5 0x21F4
+#define R300_VAP_INPUT_ROUTE_1_6 0x21F8
+#define R300_VAP_INPUT_ROUTE_1_7 0x21FC
+
+/* END */
+
+/* gap */
+/* BEGIN: Upload vertex program and data
+// The programmable vertex shader unit has a memory bank of unknown size
+// that can be written to in 16 byte units by writing the address into
+// UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs).
+//
+// Pointers into the memory bank are always in multiples of 16 bytes.
+//
+// The memory bank is divided into areas with fixed meaning.
+//
+// Starting at address UPLOAD_PROGRAM: Vertex program instructions.
+// Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB),
+// whereas the difference between known addresses suggests size 512.
+//
+// Starting at address UPLOAD_PARAMETERS: Vertex program parameters.
+// Native reported limits and the VPI layout suggest size 256, whereas
+// difference between known addresses suggests size 512.
+//
+// At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the
+// floating point pointsize. The exact purpose of this state is uncertain,
+// as there is also the R300_RE_POINTSIZE register.
+//
+// Multiple vertex programs and parameter sets can be loaded at once,
+// which could explain the size discrepancy. */
+#define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200
+# define R300_PVS_UPLOAD_PROGRAM 0x00000000
+# define R300_PVS_UPLOAD_PARAMETERS 0x00000200
+# define R300_PVS_UPLOAD_POINTSIZE 0x00000406
+/* gap */
+#define R300_VAP_PVS_UPLOAD_DATA 0x2208
+/* END */
+
+/* gap */
+/* I do not know the purpose of this register. However, I do know that
+// it is set to 221C_CLEAR for clear operations and to 221C_NORMAL
+// for normal rendering. */
+#define R300_VAP_UNKNOWN_221C 0x221C
+# define R300_221C_NORMAL 0x00000000
+# define R300_221C_CLEAR 0x0001C000
+
+/* gap */
+/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
+// rendering commands and overwriting vertex program parameters.
+// Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
+// avoids bugs caused by still running shaders reading bad data from memory. */
+#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */
+
+/* Absolutely no clue what this register is about. */
+#define R300_VAP_UNKNOWN_2288 0x2288
+# define R300_2288_R300 0x00750000 /* -- nh */
+# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */
+
+/* gap */
+/* Addresses are relative to the vertex program instruction area of the
+// memory bank. PROGRAM_END points to the last instruction of the active
+// program
+//
+// The meaning of the two UNKNOWN fields is obviously not known. However,
+// experiments so far have shown that both *must* point to an instruction
+// inside the vertex program, otherwise the GPU locks up.
+// fglrx usually sets CNTL_3_UNKNOWN to the end of the program and
+// CNTL_1_UNKNOWN points to instruction where last write to position takes place.
+// Most likely this is used to ignore rest of the program in cases where group of verts arent visible.
+// For some reason this "section" is sometimes accepted other instruction that have
+// no relationship with position calculations.
+*/
+#define R300_VAP_PVS_CNTL_1 0x22D0
+# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
+# define R300_PVS_CNTL_1_POS_END_SHIFT 10
+# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
+/* Addresses are relative the the vertex program parameters area. */
+#define R300_VAP_PVS_CNTL_2 0x22D4
+# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
+# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
+#define R300_VAP_PVS_CNTL_3 0x22D8
+# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10
+# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0
+
+/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
+// immediate vertices */
+#define R300_VAP_VTX_COLOR_R 0x2464
+#define R300_VAP_VTX_COLOR_G 0x2468
+#define R300_VAP_VTX_COLOR_B 0x246C
+#define R300_VAP_VTX_POS_0_X_1 0x2490 /* used for glVertex2*() */
+#define R300_VAP_VTX_POS_0_Y_1 0x2494
+#define R300_VAP_VTX_COLOR_PKD 0x249C /* RGBA */
+#define R300_VAP_VTX_POS_0_X_2 0x24A0 /* used for glVertex3*() */
+#define R300_VAP_VTX_POS_0_Y_2 0x24A4
+#define R300_VAP_VTX_POS_0_Z_2 0x24A8
+#define R300_VAP_VTX_END_OF_PKT 0x24AC /* write 0 to indicate end of packet? */
+
+/* gap */
+
+/* These are values from r300_reg/r300_reg.h - they are known to be correct
+ and are here so we can use one register file instead of several
+ - Vladimir */
+#define R300_GB_VAP_RASTER_VTX_FMT_0 0x4000
+# define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT (1<<0)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT (1<<1)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT (1<<2)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT (1<<3)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT (1<<4)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE (0xf<<5)
+# define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT (0x1<<16)
+
+#define R300_GB_VAP_RASTER_VTX_FMT_1 0x4004
+ /* each of the following is 3 bits wide, specifies number
+ of components */
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18
+# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21
+
+/* UNK30 seems to enables point to quad transformation on textures
+ (or something closely related to that).
+ This bit is rather fatal at the time being due to lackings at pixel shader side */
+#define R300_GB_ENABLE 0x4008
+# define R300_GB_POINT_STUFF_ENABLE (1<<0)
+# define R300_GB_LINE_STUFF_ENABLE (1<<1)
+# define R300_GB_TRIANGLE_STUFF_ENABLE (1<<2)
+# define R300_GB_STENCIL_AUTO_ENABLE (1<<4)
+# define R300_GB_UNK30 (1<<30)
+ /* each of the following is 2 bits wide */
+#define R300_GB_TEX_REPLICATE 0
+#define R300_GB_TEX_ST 1
+#define R300_GB_TEX_STR 2
+# define R300_GB_TEX0_SOURCE_SHIFT 16
+# define R300_GB_TEX1_SOURCE_SHIFT 18
+# define R300_GB_TEX2_SOURCE_SHIFT 20
+# define R300_GB_TEX3_SOURCE_SHIFT 22
+# define R300_GB_TEX4_SOURCE_SHIFT 24
+# define R300_GB_TEX5_SOURCE_SHIFT 26
+# define R300_GB_TEX6_SOURCE_SHIFT 28
+# define R300_GB_TEX7_SOURCE_SHIFT 30
+
+/* MSPOS - positions for multisample antialiasing (?) */
+#define R300_GB_MSPOS0 0x4010
+ /* shifts - each of the fields is 4 bits */
+# define R300_GB_MSPOS0__MS_X0_SHIFT 0
+# define R300_GB_MSPOS0__MS_Y0_SHIFT 4
+# define R300_GB_MSPOS0__MS_X1_SHIFT 8
+# define R300_GB_MSPOS0__MS_Y1_SHIFT 12
+# define R300_GB_MSPOS0__MS_X2_SHIFT 16
+# define R300_GB_MSPOS0__MS_Y2_SHIFT 20
+# define R300_GB_MSPOS0__MSBD0_Y 24
+# define R300_GB_MSPOS0__MSBD0_X 28
+
+#define R300_GB_MSPOS1 0x4014
+# define R300_GB_MSPOS1__MS_X3_SHIFT 0
+# define R300_GB_MSPOS1__MS_Y3_SHIFT 4
+# define R300_GB_MSPOS1__MS_X4_SHIFT 8
+# define R300_GB_MSPOS1__MS_Y4_SHIFT 12
+# define R300_GB_MSPOS1__MS_X5_SHIFT 16
+# define R300_GB_MSPOS1__MS_Y5_SHIFT 20
+# define R300_GB_MSPOS1__MSBD1 24
+
+
+#define R300_GB_TILE_CONFIG 0x4018
+# define R300_GB_TILE_ENABLE (1<<0)
+# define R300_GB_TILE_PIPE_COUNT_RV300 0
+# define R300_GB_TILE_PIPE_COUNT_R300 (3<<1)
+# define R300_GB_TILE_PIPE_COUNT_R420 (7<<1)
+# define R300_GB_TILE_SIZE_8 0
+# define R300_GB_TILE_SIZE_16 (1<<4)
+# define R300_GB_TILE_SIZE_32 (2<<4)
+# define R300_GB_SUPER_SIZE_1 (0<<6)
+# define R300_GB_SUPER_SIZE_2 (1<<6)
+# define R300_GB_SUPER_SIZE_4 (2<<6)
+# define R300_GB_SUPER_SIZE_8 (3<<6)
+# define R300_GB_SUPER_SIZE_16 (4<<6)
+# define R300_GB_SUPER_SIZE_32 (5<<6)
+# define R300_GB_SUPER_SIZE_64 (6<<6)
+# define R300_GB_SUPER_SIZE_128 (7<<6)
+# define R300_GB_SUPER_X_SHIFT 9 /* 3 bits wide */
+# define R300_GB_SUPER_Y_SHIFT 12 /* 3 bits wide */
+# define R300_GB_SUPER_TILE_A 0
+# define R300_GB_SUPER_TILE_B (1<<15)
+# define R300_GB_SUBPIXEL_1_12 0
+# define R300_GB_SUBPIXEL_1_16 (1<<16)
+
+#define R300_GB_FIFO_SIZE 0x4024
+ /* each of the following is 2 bits wide */
+#define R300_GB_FIFO_SIZE_32 0
+#define R300_GB_FIFO_SIZE_64 1
+#define R300_GB_FIFO_SIZE_128 2
+#define R300_GB_FIFO_SIZE_256 3
+# define R300_SC_IFIFO_SIZE_SHIFT 0
+# define R300_SC_TZFIFO_SIZE_SHIFT 2
+# define R300_SC_BFIFO_SIZE_SHIFT 4
+
+# define R300_US_OFIFO_SIZE_SHIFT 12
+# define R300_US_WFIFO_SIZE_SHIFT 14
+ /* the following use the same constants as above, but meaning is
+ is times 2 (i.e. instead of 32 words it means 64 */
+# define R300_RS_TFIFO_SIZE_SHIFT 6
+# define R300_RS_CFIFO_SIZE_SHIFT 8
+# define R300_US_RAM_SIZE_SHIFT 10
+ /* watermarks, 3 bits wide */
+# define R300_RS_HIGHWATER_COL_SHIFT 16
+# define R300_RS_HIGHWATER_TEX_SHIFT 19
+# define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */
+# define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24
+
+#define R300_GB_SELECT 0x401C
+# define R300_GB_FOG_SELECT_C0A 0
+# define R300_GB_FOG_SELECT_C1A 1
+# define R300_GB_FOG_SELECT_C2A 2
+# define R300_GB_FOG_SELECT_C3A 3
+# define R300_GB_FOG_SELECT_1_1_W 4
+# define R300_GB_FOG_SELECT_Z 5
+# define R300_GB_DEPTH_SELECT_Z 0
+# define R300_GB_DEPTH_SELECT_1_1_W (1<<3)
+# define R300_GB_W_SELECT_1_W 0
+# define R300_GB_W_SELECT_1 (1<<4)
+
+#define R300_GB_AA_CONFIG 0x4020
+# define R300_AA_ENABLE 0x01
+# define R300_AA_SUBSAMPLES_2 0
+# define R300_AA_SUBSAMPLES_3 (1<<1)
+# define R300_AA_SUBSAMPLES_4 (2<<1)
+# define R300_AA_SUBSAMPLES_6 (3<<1)
+
+/* END */
+
+/* gap */
+/* The upper enable bits are guessed, based on fglrx reported limits. */
+#define R300_TX_ENABLE 0x4104
+# define R300_TX_ENABLE_0 (1 << 0)
+# define R300_TX_ENABLE_1 (1 << 1)
+# define R300_TX_ENABLE_2 (1 << 2)
+# define R300_TX_ENABLE_3 (1 << 3)
+# define R300_TX_ENABLE_4 (1 << 4)
+# define R300_TX_ENABLE_5 (1 << 5)
+# define R300_TX_ENABLE_6 (1 << 6)
+# define R300_TX_ENABLE_7 (1 << 7)
+# define R300_TX_ENABLE_8 (1 << 8)
+# define R300_TX_ENABLE_9 (1 << 9)
+# define R300_TX_ENABLE_10 (1 << 10)
+# define R300_TX_ENABLE_11 (1 << 11)
+# define R300_TX_ENABLE_12 (1 << 12)
+# define R300_TX_ENABLE_13 (1 << 13)
+# define R300_TX_ENABLE_14 (1 << 14)
+# define R300_TX_ENABLE_15 (1 << 15)
+
+/* The pointsize is given in multiples of 6. The pointsize can be
+// enormous: Clear() renders a single point that fills the entire
+// framebuffer. */
+#define R300_RE_POINTSIZE 0x421C
+# define R300_POINTSIZE_Y_SHIFT 0
+# define R300_POINTSIZE_Y_MASK (0xFFFF << 0) /* GUESS */
+# define R300_POINTSIZE_X_SHIFT 16
+# define R300_POINTSIZE_X_MASK (0xFFFF << 16) /* GUESS */
+# define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6)
+
+/* The line width is given in multiples of 6.
+ In default mode lines are classified as vertical lines.
+ HO: horizontal
+ VE: vertical or horizontal
+ HO & VE: no classification
+*/
+#define R300_RE_LINE_CNT 0x4234
+# define R300_LINESIZE_SHIFT 0
+# define R300_LINESIZE_MASK (0xFFFF << 0) /* GUESS */
+# define R300_LINESIZE_MAX (R300_LINESIZE_MASK / 6)
+# define R300_LINE_CNT_HO (1 << 16)
+# define R300_LINE_CNT_VE (1 << 17)
+
+/* Some sort of scale or clamp value for texcoordless textures. */
+#define R300_RE_UNK4238 0x4238
+
+#define R300_RE_SHADE_MODEL 0x4278
+# define R300_RE_SHADE_MODEL_SMOOTH 0x3aaaa
+# define R300_RE_SHADE_MODEL_FLAT 0x39595
+
+/* Dangerous */
+#define R300_RE_POLYGON_MODE 0x4288
+# define R300_PM_ENABLED (1 << 0)
+# define R300_PM_FRONT_POINT (0 << 0)
+# define R300_PM_BACK_POINT (0 << 0)
+# define R300_PM_FRONT_LINE (1 << 4)
+# define R300_PM_FRONT_FILL (1 << 5)
+# define R300_PM_BACK_LINE (1 << 7)
+# define R300_PM_BACK_FILL (1 << 8)
+
+/* Not sure why there are duplicate of factor and constant values.
+ My best guess so far is that there are seperate zbiases for test and write.
+ Ordering might be wrong.
+ Some of the tests indicate that fgl has a fallback implementation of zbias
+ via pixel shaders. */
+#define R300_RE_ZBIAS_T_FACTOR 0x42A4
+#define R300_RE_ZBIAS_T_CONSTANT 0x42A8
+#define R300_RE_ZBIAS_W_FACTOR 0x42AC
+#define R300_RE_ZBIAS_W_CONSTANT 0x42B0
+
+/* This register needs to be set to (1<<1) for RV350 to correctly
+ perform depth test (see --vb-triangles in r300_demo)
+ Don't know about other chips. - Vladimir
+ This is set to 3 when GL_POLYGON_OFFSET_FILL is on.
+ My guess is that there are two bits for each zbias primitive (FILL, LINE, POINT).
+ One to enable depth test and one for depth write.
+ Yet this doesnt explain why depth writes work ...
+ */
+#define R300_RE_OCCLUSION_CNTL 0x42B4
+# define R300_OCCLUSION_ON (1<<1)
+
+#define R300_RE_CULL_CNTL 0x42B8
+# define R300_CULL_FRONT (1 << 0)
+# define R300_CULL_BACK (1 << 1)
+# define R300_FRONT_FACE_CCW (0 << 2)
+# define R300_FRONT_FACE_CW (1 << 2)
+
+
+/* BEGIN: Rasterization / Interpolators - many guesses
+// 0_UNKNOWN_18 has always been set except for clear operations.
+// TC_CNT is the number of incoming texture coordinate sets (i.e. it depends
+// on the vertex program, *not* the fragment program) */
+#define R300_RS_CNTL_0 0x4300
+# define R300_RS_CNTL_TC_CNT_SHIFT 2
+# define R300_RS_CNTL_TC_CNT_MASK (7 << 2)
+# define R300_RS_CNTL_CI_CNT_SHIFT 7 /* number of color interpolators used */
+# define R300_RS_CNTL_0_UNKNOWN_18 (1 << 18)
+/* Guess: RS_CNTL_1 holds the index of the highest used RS_ROUTE_n register. */
+#define R300_RS_CNTL_1 0x4304
+
+/* gap */
+/* Only used for texture coordinates.
+// Use the source field to route texture coordinate input from the vertex program
+// to the desired interpolator. Note that the source field is relative to the
+// outputs the vertex program *actually* writes. If a vertex program only writes
+// texcoord[1], this will be source index 0.
+// Set INTERP_USED on all interpolators that produce data used by the
+// fragment program. INTERP_USED looks like a swizzling mask, but
+// I haven't seen it used that way.
+//
+// Note: The _UNKNOWN constants are always set in their respective register.
+// I don't know if this is necessary. */
+#define R300_RS_INTERP_0 0x4310
+#define R300_RS_INTERP_1 0x4314
+# define R300_RS_INTERP_1_UNKNOWN 0x40
+#define R300_RS_INTERP_2 0x4318
+# define R300_RS_INTERP_2_UNKNOWN 0x80
+#define R300_RS_INTERP_3 0x431C
+# define R300_RS_INTERP_3_UNKNOWN 0xC0
+#define R300_RS_INTERP_4 0x4320
+#define R300_RS_INTERP_5 0x4324
+#define R300_RS_INTERP_6 0x4328
+#define R300_RS_INTERP_7 0x432C
+# define R300_RS_INTERP_SRC_SHIFT 2
+# define R300_RS_INTERP_SRC_MASK (7 << 2)
+# define R300_RS_INTERP_USED 0x00D10000
+
+/* These DWORDs control how vertex data is routed into fragment program
+// registers, after interpolators. */
+#define R300_RS_ROUTE_0 0x4330
+#define R300_RS_ROUTE_1 0x4334
+#define R300_RS_ROUTE_2 0x4338
+#define R300_RS_ROUTE_3 0x433C /* GUESS */
+#define R300_RS_ROUTE_4 0x4340 /* GUESS */
+#define R300_RS_ROUTE_5 0x4344 /* GUESS */
+#define R300_RS_ROUTE_6 0x4348 /* GUESS */
+#define R300_RS_ROUTE_7 0x434C /* GUESS */
+# define R300_RS_ROUTE_SOURCE_INTERP_0 0
+# define R300_RS_ROUTE_SOURCE_INTERP_1 1
+# define R300_RS_ROUTE_SOURCE_INTERP_2 2
+# define R300_RS_ROUTE_SOURCE_INTERP_3 3
+# define R300_RS_ROUTE_SOURCE_INTERP_4 4
+# define R300_RS_ROUTE_SOURCE_INTERP_5 5 /* GUESS */
+# define R300_RS_ROUTE_SOURCE_INTERP_6 6 /* GUESS */
+# define R300_RS_ROUTE_SOURCE_INTERP_7 7 /* GUESS */
+# define R300_RS_ROUTE_ENABLE (1 << 3) /* GUESS */
+# define R300_RS_ROUTE_DEST_SHIFT 6
+# define R300_RS_ROUTE_DEST_MASK (31 << 6) /* GUESS */
+
+/* Special handling for color: When the fragment program uses color,
+// the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the
+// color register index. */
+# define R300_RS_ROUTE_0_COLOR (1 << 14)
+# define R300_RS_ROUTE_0_COLOR_DEST_SHIFT 17
+# define R300_RS_ROUTE_0_COLOR_DEST_MASK (31 << 17) /* GUESS */
+/* As above, but for secondary color */
+# define R300_RS_ROUTE_1_COLOR1 (1 << 14)
+# define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17
+# define R300_RS_ROUTE_1_COLOR1_DEST_MASK (31 << 17)
+# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11)
+/* END */
+
+/* BEGIN: Scissors and cliprects
+// There are four clipping rectangles. Their corner coordinates are inclusive.
+// Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending
+// on whether the pixel is inside cliprects 0-3, respectively. For example,
+// if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned
+// the number 3 (binary 0011).
+// Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set,
+// the pixel is rasterized.
+//
+// In addition to this, there is a scissors rectangle. Only pixels inside the
+// scissors rectangle are drawn. (coordinates are inclusive)
+//
+// For some reason, the top-left corner of the framebuffer is at (1440, 1440)
+// for the purpose of clipping and scissors. */
+#define R300_RE_CLIPRECT_TL_0 0x43B0
+#define R300_RE_CLIPRECT_BR_0 0x43B4
+#define R300_RE_CLIPRECT_TL_1 0x43B8
+#define R300_RE_CLIPRECT_BR_1 0x43BC
+#define R300_RE_CLIPRECT_TL_2 0x43C0
+#define R300_RE_CLIPRECT_BR_2 0x43C4
+#define R300_RE_CLIPRECT_TL_3 0x43C8
+#define R300_RE_CLIPRECT_BR_3 0x43CC
+# define R300_CLIPRECT_OFFSET 1440
+# define R300_CLIPRECT_MASK 0x1FFF
+# define R300_CLIPRECT_X_SHIFT 0
+# define R300_CLIPRECT_X_MASK (0x1FFF << 0)
+# define R300_CLIPRECT_Y_SHIFT 13
+# define R300_CLIPRECT_Y_MASK (0x1FFF << 13)
+#define R300_RE_CLIPRECT_CNTL 0x43D0
+# define R300_CLIP_OUT (1 << 0)
+# define R300_CLIP_0 (1 << 1)
+# define R300_CLIP_1 (1 << 2)
+# define R300_CLIP_10 (1 << 3)
+# define R300_CLIP_2 (1 << 4)
+# define R300_CLIP_20 (1 << 5)
+# define R300_CLIP_21 (1 << 6)
+# define R300_CLIP_210 (1 << 7)
+# define R300_CLIP_3 (1 << 8)
+# define R300_CLIP_30 (1 << 9)
+# define R300_CLIP_31 (1 << 10)
+# define R300_CLIP_310 (1 << 11)
+# define R300_CLIP_32 (1 << 12)
+# define R300_CLIP_320 (1 << 13)
+# define R300_CLIP_321 (1 << 14)
+# define R300_CLIP_3210 (1 << 15)
+
+/* gap */
+#define R300_RE_SCISSORS_TL 0x43E0
+#define R300_RE_SCISSORS_BR 0x43E4
+# define R300_SCISSORS_OFFSET 1440
+# define R300_SCISSORS_X_SHIFT 0
+# define R300_SCISSORS_X_MASK (0x1FFF << 0)
+# define R300_SCISSORS_Y_SHIFT 13
+# define R300_SCISSORS_Y_MASK (0x1FFF << 13)
+/* END */
+
+/* BEGIN: Texture specification
+// The texture specification dwords are grouped by meaning and not by texture unit.
+// This means that e.g. the offset for texture image unit N is found in register
+// TX_OFFSET_0 + (4*N) */
+#define R300_TX_FILTER_0 0x4400
+# define R300_TX_REPEAT 0
+# define R300_TX_MIRRORED 1
+# define R300_TX_CLAMP 4
+# define R300_TX_CLAMP_TO_EDGE 2
+# define R300_TX_CLAMP_TO_BORDER 6
+# define R300_TX_WRAP_S_SHIFT 0
+# define R300_TX_WRAP_S_MASK (7 << 0)
+# define R300_TX_WRAP_T_SHIFT 3
+# define R300_TX_WRAP_T_MASK (7 << 3)
+# define R300_TX_WRAP_Q_SHIFT 6
+# define R300_TX_WRAP_Q_MASK (7 << 6)
+# define R300_TX_MAG_FILTER_NEAREST (1 << 9)
+# define R300_TX_MAG_FILTER_LINEAR (2 << 9)
+# define R300_TX_MAG_FILTER_MASK (3 << 9)
+# define R300_TX_MIN_FILTER_NEAREST (1 << 11)
+# define R300_TX_MIN_FILTER_LINEAR (2 << 11)
+# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11)
+# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11)
+# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11)
+# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11)
+
+/* NOTE: NEAREST doesnt seem to exist.
+ Im not seting MAG_FILTER_MASK and (3 << 11) on for all
+ anisotropy modes because that would void selected mag filter */
+# define R300_TX_MIN_FILTER_ANISO_NEAREST ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/)
+# define R300_TX_MIN_FILTER_ANISO_LINEAR ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/)
+# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST ((1 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/)
+# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR ((2 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/)
+# define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) )
+# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21)
+# define R300_TX_MAX_ANISO_2_TO_1 (2 << 21)
+# define R300_TX_MAX_ANISO_4_TO_1 (4 << 21)
+# define R300_TX_MAX_ANISO_8_TO_1 (6 << 21)
+# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21)
+# define R300_TX_MAX_ANISO_MASK (14 << 21)
+
+#define R300_TX_UNK1_0 0x4440
+# define R300_LOD_BIAS_MASK 0x1fff
+
+#define R300_TX_SIZE_0 0x4480
+# define R300_TX_WIDTHMASK_SHIFT 0
+# define R300_TX_WIDTHMASK_MASK (2047 << 0)
+# define R300_TX_HEIGHTMASK_SHIFT 11
+# define R300_TX_HEIGHTMASK_MASK (2047 << 11)
+# define R300_TX_UNK23 (1 << 23)
+# define R300_TX_SIZE_SHIFT 26 /* largest of width, height */
+# define R300_TX_SIZE_MASK (15 << 26)
+#define R300_TX_FORMAT_0 0x44C0
+ /* The interpretation of the format word by Wladimir van der Laan */
+ /* The X, Y, Z and W refer to the layout of the components.
+ They are given meanings as R, G, B and Alpha by the swizzle
+ specification */
+# define R300_TX_FORMAT_X8 0x0
+# define R300_TX_FORMAT_X16 0x1
+# define R300_TX_FORMAT_Y4X4 0x2
+# define R300_TX_FORMAT_Y8X8 0x3
+# define R300_TX_FORMAT_Y16X16 0x4
+# define R300_TX_FORMAT_Z3Y3X2 0x5
+# define R300_TX_FORMAT_Z5Y6X5 0x6
+# define R300_TX_FORMAT_Z6Y5X5 0x7
+# define R300_TX_FORMAT_Z11Y11X10 0x8
+# define R300_TX_FORMAT_Z10Y11X11 0x9
+# define R300_TX_FORMAT_W4Z4Y4X4 0xA
+# define R300_TX_FORMAT_W1Z5Y5X5 0xB
+# define R300_TX_FORMAT_W8Z8Y8X8 0xC
+# define R300_TX_FORMAT_W2Z10Y10X10 0xD
+# define R300_TX_FORMAT_W16Z16Y16X16 0xE
+# define R300_TX_FORMAT_DXT1 0xF
+# define R300_TX_FORMAT_DXT3 0x10
+# define R300_TX_FORMAT_DXT5 0x11
+# define R300_TX_FORMAT_D3DMFT_CxV8U8 0x12 /* no swizzle */
+# define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */
+# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */
+# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */
+ /* 0x16 - some 16 bit green format.. ?? */
+# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */
+
+ /* gap */
+ /* Floating point formats */
+ /* Note - hardware supports both 16 and 32 bit floating point */
+# define R300_TX_FORMAT_FL_I16 0x18
+# define R300_TX_FORMAT_FL_I16A16 0x19
+# define R300_TX_FORMAT_FL_R16G16B16A16 0x1A
+# define R300_TX_FORMAT_FL_I32 0x1B
+# define R300_TX_FORMAT_FL_I32A32 0x1C
+# define R300_TX_FORMAT_FL_R32G32B32A32 0x1D
+ /* alpha modes, convenience mostly */
+ /* if you have alpha, pick constant appropriate to the
+ number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */
+# define R300_TX_FORMAT_ALPHA_1CH 0x000
+# define R300_TX_FORMAT_ALPHA_2CH 0x200
+# define R300_TX_FORMAT_ALPHA_4CH 0x600
+# define R300_TX_FORMAT_ALPHA_NONE 0xA00
+ /* Swizzling */
+ /* constants */
+# define R300_TX_FORMAT_X 0
+# define R300_TX_FORMAT_Y 1
+# define R300_TX_FORMAT_Z 2
+# define R300_TX_FORMAT_W 3
+# define R300_TX_FORMAT_ZERO 4
+# define R300_TX_FORMAT_ONE 5
+# define R300_TX_FORMAT_CUT_Z 6 /* 2.0*Z, everything above 1.0 is set to 0.0 */
+# define R300_TX_FORMAT_CUT_W 7 /* 2.0*W, everything above 1.0 is set to 0.0 */
+
+# define R300_TX_FORMAT_B_SHIFT 18
+# define R300_TX_FORMAT_G_SHIFT 15
+# define R300_TX_FORMAT_R_SHIFT 12
+# define R300_TX_FORMAT_A_SHIFT 9
+ /* Convenience macro to take care of layout and swizzling */
+# define R300_EASY_TX_FORMAT(B, G, R, A, FMT) (\
+ ((R300_TX_FORMAT_##B)<<R300_TX_FORMAT_B_SHIFT) \
+ | ((R300_TX_FORMAT_##G)<<R300_TX_FORMAT_G_SHIFT) \
+ | ((R300_TX_FORMAT_##R)<<R300_TX_FORMAT_R_SHIFT) \
+ | ((R300_TX_FORMAT_##A)<<R300_TX_FORMAT_A_SHIFT) \
+ | (R300_TX_FORMAT_##FMT) \
+ )
+ /* These can be ORed with result of R300_EASY_TX_FORMAT() */
+ /* We don't really know what they do. Take values from a constant color ? */
+# define R300_TX_FORMAT_CONST_X (1<<5)
+# define R300_TX_FORMAT_CONST_Y (2<<5)
+# define R300_TX_FORMAT_CONST_Z (4<<5)
+# define R300_TX_FORMAT_CONST_W (8<<5)
+
+# define R300_TX_FORMAT_YUV_MODE 0x00800000
+
+#define R300_TX_OFFSET_0 0x4540
+/* BEGIN: Guess from R200 */
+# define R300_TXO_ENDIAN_NO_SWAP (0 << 0)
+# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0)
+# define R300_TXO_ENDIAN_WORD_SWAP (2 << 0)
+# define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0)
+# define R300_TXO_OFFSET_MASK 0xffffffe0
+# define R300_TXO_OFFSET_SHIFT 5
+/* END */
+#define R300_TX_UNK4_0 0x4580
+#define R300_TX_BORDER_COLOR_0 0x45C0 //ff00ff00 == { 0, 1.0, 0, 1.0 }
+
+/* END */
+
+/* BEGIN: Fragment program instruction set
+// Fragment programs are written directly into register space.
+// There are separate instruction streams for texture instructions and ALU
+// instructions.
+// In order to synchronize these streams, the program is divided into up
+// to 4 nodes. Each node begins with a number of TEX operations, followed
+// by a number of ALU operations.
+// The first node can have zero TEX ops, all subsequent nodes must have at least
+// one TEX ops.
+// All nodes must have at least one ALU op.
+//
+// The index of the last node is stored in PFS_CNTL_0: A value of 0 means
+// 1 node, a value of 3 means 4 nodes.
+// The total amount of instructions is defined in PFS_CNTL_2. The offsets are
+// offsets into the respective instruction streams, while *_END points to the
+// last instruction relative to this offset. */
+#define R300_PFS_CNTL_0 0x4600
+# define R300_PFS_CNTL_LAST_NODES_SHIFT 0
+# define R300_PFS_CNTL_LAST_NODES_MASK (3 << 0)
+# define R300_PFS_CNTL_FIRST_NODE_HAS_TEX (1 << 3)
+#define R300_PFS_CNTL_1 0x4604
+/* There is an unshifted value here which has so far always been equal to the
+// index of the highest used temporary register. */
+#define R300_PFS_CNTL_2 0x4608
+# define R300_PFS_CNTL_ALU_OFFSET_SHIFT 0
+# define R300_PFS_CNTL_ALU_OFFSET_MASK (63 << 0)
+# define R300_PFS_CNTL_ALU_END_SHIFT 6
+# define R300_PFS_CNTL_ALU_END_MASK (63 << 0)
+# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 12
+# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 12) /* GUESS */
+# define R300_PFS_CNTL_TEX_END_SHIFT 18
+# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* GUESS */
+
+/* gap */
+/* Nodes are stored backwards. The last active node is always stored in
+// PFS_NODE_3.
+// Example: In a 2-node program, NODE_0 and NODE_1 are set to 0. The
+// first node is stored in NODE_2, the second node is stored in NODE_3.
+//
+// Offsets are relative to the master offset from PFS_CNTL_2.
+// LAST_NODE is set for the last node, and only for the last node. */
+#define R300_PFS_NODE_0 0x4610
+#define R300_PFS_NODE_1 0x4614
+#define R300_PFS_NODE_2 0x4618
+#define R300_PFS_NODE_3 0x461C
+# define R300_PFS_NODE_ALU_OFFSET_SHIFT 0
+# define R300_PFS_NODE_ALU_OFFSET_MASK (63 << 0)
+# define R300_PFS_NODE_ALU_END_SHIFT 6
+# define R300_PFS_NODE_ALU_END_MASK (63 << 6)
+# define R300_PFS_NODE_TEX_OFFSET_SHIFT 12
+# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12)
+# define R300_PFS_NODE_TEX_END_SHIFT 17
+# define R300_PFS_NODE_TEX_END_MASK (31 << 17)
+# define R300_PFS_NODE_LAST_NODE (1 << 22)
+
+/* TEX
+// As far as I can tell, texture instructions cannot write into output
+// registers directly. A subsequent ALU instruction is always necessary,
+// even if it's just MAD o0, r0, 1, 0 */
+#define R300_PFS_TEXI_0 0x4620
+# define R300_FPITX_SRC_SHIFT 0
+# define R300_FPITX_SRC_MASK (31 << 0)
+# define R300_FPITX_SRC_CONST (1 << 5) /* GUESS */
+# define R300_FPITX_DST_SHIFT 6
+# define R300_FPITX_DST_MASK (31 << 6)
+# define R300_FPITX_IMAGE_SHIFT 11
+# define R300_FPITX_IMAGE_MASK (15 << 11) /* GUESS based on layout and native limits */
+/* Unsure if these are opcodes, or some kind of bitfield, but this is how
+ * they were set when I checked
+ */
+# define R300_FPITX_OPCODE_SHIFT 15
+# define R300_FPITX_OP_TEX 1
+# define R300_FPITX_OP_TXP 3
+# define R300_FPITX_OP_TXB 4
+
+/* ALU
+// The ALU instructions register blocks are enumerated according to the order
+// in which fglrx. I assume there is space for 64 instructions, since
+// each block has space for a maximum of 64 DWORDs, and this matches reported
+// native limits.
+//
+// The basic functional block seems to be one MAD for each color and alpha,
+// and an adder that adds all components after the MUL.
+// - ADD, MUL, MAD etc.: use MAD with appropriate neutral operands
+// - DP4: Use OUTC_DP4, OUTA_DP4
+// - DP3: Use OUTC_DP3, OUTA_DP4, appropriate alpha operands
+// - DPH: Use OUTC_DP4, OUTA_DP4, appropriate alpha operands
+// - CMP: If ARG2 < 0, return ARG1, else return ARG0
+// - FLR: use FRC+MAD
+// - XPD: use MAD+MAD
+// - SGE, SLT: use MAD+CMP
+// - RSQ: use ABS modifier for argument
+// - Use OUTC_REPL_ALPHA to write results of an alpha-only operation (e.g. RCP)
+// into color register
+// - apparently, there's no quick DST operation
+// - fglrx set FPI2_UNKNOWN_31 on a "MAD fragment.color, tmp0, tmp1, tmp2"
+// - fglrx set FPI2_UNKNOWN_31 on a "MAX r2, r1, c0"
+// - fglrx once set FPI0_UNKNOWN_31 on a "FRC r1, r1"
+//
+// Operand selection
+// First stage selects three sources from the available registers and
+// constant parameters. This is defined in INSTR1 (color) and INSTR3 (alpha).
+// fglrx sorts the three source fields: Registers before constants,
+// lower indices before higher indices; I do not know whether this is necessary.
+// fglrx fills unused sources with "read constant 0"
+// According to specs, you cannot select more than two different constants.
+//
+// Second stage selects the operands from the sources. This is defined in
+// INSTR0 (color) and INSTR2 (alpha). You can also select the special constants
+// zero and one.
+// Swizzling and negation happens in this stage, as well.
+//
+// Important: Color and alpha seem to be mostly separate, i.e. their sources
+// selection appears to be fully independent (the register storage is probably
+// physically split into a color and an alpha section).
+// However (because of the apparent physical split), there is some interaction
+// WRT swizzling. If, for example, you want to load an R component into an
+// Alpha operand, this R component is taken from a *color* source, not from
+// an alpha source. The corresponding register doesn't even have to appear in
+// the alpha sources list. (I hope this alll makes sense to you)
+//
+// Destination selection
+// The destination register index is in FPI1 (color) and FPI3 (alpha) together
+// with enable bits.
+// There are separate enable bits for writing into temporary registers
+// (DSTC_REG_* /DSTA_REG) and and program output registers (DSTC_OUTPUT_* /DSTA_OUTPUT).
+// You can write to both at once, or not write at all (the same index
+// must be used for both).
+//
+// Note: There is a special form for LRP
+// - Argument order is the same as in ARB_fragment_program.
+// - Operation is MAD
+// - ARG1 is set to ARGC_SRC1C_LRP/ARGC_SRC1A_LRP
+// - Set FPI0/FPI2_SPECIAL_LRP
+// Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD */
+#define R300_PFS_INSTR1_0 0x46C0
+# define R300_FPI1_SRC0C_SHIFT 0
+# define R300_FPI1_SRC0C_MASK (31 << 0)
+# define R300_FPI1_SRC0C_CONST (1 << 5)
+# define R300_FPI1_SRC1C_SHIFT 6
+# define R300_FPI1_SRC1C_MASK (31 << 6)
+# define R300_FPI1_SRC1C_CONST (1 << 11)
+# define R300_FPI1_SRC2C_SHIFT 12
+# define R300_FPI1_SRC2C_MASK (31 << 12)
+# define R300_FPI1_SRC2C_CONST (1 << 17)
+# define R300_FPI1_DSTC_SHIFT 18
+# define R300_FPI1_DSTC_MASK (31 << 18)
+# define R300_FPI1_DSTC_REG_X (1 << 23)
+# define R300_FPI1_DSTC_REG_Y (1 << 24)
+# define R300_FPI1_DSTC_REG_Z (1 << 25)
+# define R300_FPI1_DSTC_OUTPUT_X (1 << 26)
+# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27)
+# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28)
+
+#define R300_PFS_INSTR3_0 0x47C0
+# define R300_FPI3_SRC0A_SHIFT 0
+# define R300_FPI3_SRC0A_MASK (31 << 0)
+# define R300_FPI3_SRC0A_CONST (1 << 5)
+# define R300_FPI3_SRC1A_SHIFT 6
+# define R300_FPI3_SRC1A_MASK (31 << 6)
+# define R300_FPI3_SRC1A_CONST (1 << 11)
+# define R300_FPI3_SRC2A_SHIFT 12
+# define R300_FPI3_SRC2A_MASK (31 << 12)
+# define R300_FPI3_SRC2A_CONST (1 << 17)
+# define R300_FPI3_DSTA_SHIFT 18
+# define R300_FPI3_DSTA_MASK (31 << 18)
+# define R300_FPI3_DSTA_REG (1 << 23)
+# define R300_FPI3_DSTA_OUTPUT (1 << 24)
+
+#define R300_PFS_INSTR0_0 0x48C0
+# define R300_FPI0_ARGC_SRC0C_XYZ 0
+# define R300_FPI0_ARGC_SRC0C_XXX 1
+# define R300_FPI0_ARGC_SRC0C_YYY 2
+# define R300_FPI0_ARGC_SRC0C_ZZZ 3
+# define R300_FPI0_ARGC_SRC1C_XYZ 4
+# define R300_FPI0_ARGC_SRC1C_XXX 5
+# define R300_FPI0_ARGC_SRC1C_YYY 6
+# define R300_FPI0_ARGC_SRC1C_ZZZ 7
+# define R300_FPI0_ARGC_SRC2C_XYZ 8
+# define R300_FPI0_ARGC_SRC2C_XXX 9
+# define R300_FPI0_ARGC_SRC2C_YYY 10
+# define R300_FPI0_ARGC_SRC2C_ZZZ 11
+# define R300_FPI0_ARGC_SRC0A 12
+# define R300_FPI0_ARGC_SRC1A 13
+# define R300_FPI0_ARGC_SRC2A 14
+# define R300_FPI0_ARGC_SRC1C_LRP 15
+# define R300_FPI0_ARGC_ZERO 20
+# define R300_FPI0_ARGC_ONE 21
+# define R300_FPI0_ARGC_HALF 22 /* GUESS */
+# define R300_FPI0_ARGC_SRC0C_YZX 23
+# define R300_FPI0_ARGC_SRC1C_YZX 24
+# define R300_FPI0_ARGC_SRC2C_YZX 25
+# define R300_FPI0_ARGC_SRC0C_ZXY 26
+# define R300_FPI0_ARGC_SRC1C_ZXY 27
+# define R300_FPI0_ARGC_SRC2C_ZXY 28
+# define R300_FPI0_ARGC_SRC0CA_WZY 29
+# define R300_FPI0_ARGC_SRC1CA_WZY 30
+# define R300_FPI0_ARGC_SRC2CA_WZY 31
+
+# define R300_FPI0_ARG0C_SHIFT 0
+# define R300_FPI0_ARG0C_MASK (31 << 0)
+# define R300_FPI0_ARG0C_NEG (1 << 5)
+# define R300_FPI0_ARG0C_ABS (1 << 6)
+# define R300_FPI0_ARG1C_SHIFT 7
+# define R300_FPI0_ARG1C_MASK (31 << 7)
+# define R300_FPI0_ARG1C_NEG (1 << 12)
+# define R300_FPI0_ARG1C_ABS (1 << 13)
+# define R300_FPI0_ARG2C_SHIFT 14
+# define R300_FPI0_ARG2C_MASK (31 << 14)
+# define R300_FPI0_ARG2C_NEG (1 << 19)
+# define R300_FPI0_ARG2C_ABS (1 << 20)
+# define R300_FPI0_SPECIAL_LRP (1 << 21)
+# define R300_FPI0_OUTC_MAD (0 << 23)
+# define R300_FPI0_OUTC_DP3 (1 << 23)
+# define R300_FPI0_OUTC_DP4 (2 << 23)
+# define R300_FPI0_OUTC_MIN (4 << 23)
+# define R300_FPI0_OUTC_MAX (5 << 23)
+# define R300_FPI0_OUTC_CMP (8 << 23)
+# define R300_FPI0_OUTC_FRC (9 << 23)
+# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23)
+# define R300_FPI0_OUTC_SAT (1 << 30)
+# define R300_FPI0_UNKNOWN_31 (1 << 31)
+
+#define R300_PFS_INSTR2_0 0x49C0
+# define R300_FPI2_ARGA_SRC0C_X 0
+# define R300_FPI2_ARGA_SRC0C_Y 1
+# define R300_FPI2_ARGA_SRC0C_Z 2
+# define R300_FPI2_ARGA_SRC1C_X 3
+# define R300_FPI2_ARGA_SRC1C_Y 4
+# define R300_FPI2_ARGA_SRC1C_Z 5
+# define R300_FPI2_ARGA_SRC2C_X 6
+# define R300_FPI2_ARGA_SRC2C_Y 7
+# define R300_FPI2_ARGA_SRC2C_Z 8
+# define R300_FPI2_ARGA_SRC0A 9
+# define R300_FPI2_ARGA_SRC1A 10
+# define R300_FPI2_ARGA_SRC2A 11
+# define R300_FPI2_ARGA_SRC1A_LRP 15
+# define R300_FPI2_ARGA_ZERO 16
+# define R300_FPI2_ARGA_ONE 17
+# define R300_FPI2_ARGA_HALF 18 /* GUESS */
+
+# define R300_FPI2_ARG0A_SHIFT 0
+# define R300_FPI2_ARG0A_MASK (31 << 0)
+# define R300_FPI2_ARG0A_NEG (1 << 5)
+# define R300_FPI2_ARG0A_ABS (1 << 6) /* GUESS */
+# define R300_FPI2_ARG1A_SHIFT 7
+# define R300_FPI2_ARG1A_MASK (31 << 7)
+# define R300_FPI2_ARG1A_NEG (1 << 12)
+# define R300_FPI2_ARG1A_ABS (1 << 13) /* GUESS */
+# define R300_FPI2_ARG2A_SHIFT 14
+# define R300_FPI2_ARG2A_MASK (31 << 14)
+# define R300_FPI2_ARG2A_NEG (1 << 19)
+# define R300_FPI2_ARG2A_ABS (1 << 20) /* GUESS */
+# define R300_FPI2_SPECIAL_LRP (1 << 21)
+# define R300_FPI2_OUTA_MAD (0 << 23)
+# define R300_FPI2_OUTA_DP4 (1 << 23)
+# define R300_FPI2_OUTA_MIN (2 << 23)
+# define R300_FPI2_OUTA_MAX (3 << 23)
+# define R300_FPI2_OUTA_CMP (6 << 23)
+# define R300_FPI2_OUTA_FRC (7 << 23)
+# define R300_FPI2_OUTA_EX2 (8 << 23)
+# define R300_FPI2_OUTA_LG2 (9 << 23)
+# define R300_FPI2_OUTA_RCP (10 << 23)
+# define R300_FPI2_OUTA_RSQ (11 << 23)
+# define R300_FPI2_OUTA_SAT (1 << 30)
+# define R300_FPI2_UNKNOWN_31 (1 << 31)
+/* END */
+
+/* gap */
+#define R300_PP_ALPHA_TEST 0x4BD4
+# define R300_REF_ALPHA_MASK 0x000000ff
+# define R300_ALPHA_TEST_FAIL (0 << 8)
+# define R300_ALPHA_TEST_LESS (1 << 8)
+# define R300_ALPHA_TEST_LEQUAL (3 << 8)
+# define R300_ALPHA_TEST_EQUAL (2 << 8)
+# define R300_ALPHA_TEST_GEQUAL (6 << 8)
+# define R300_ALPHA_TEST_GREATER (4 << 8)
+# define R300_ALPHA_TEST_NEQUAL (5 << 8)
+# define R300_ALPHA_TEST_PASS (7 << 8)
+# define R300_ALPHA_TEST_OP_MASK (7 << 8)
+# define R300_ALPHA_TEST_ENABLE (1 << 11)
+
+/* gap */
+/* Fragment program parameters in 7.16 floating point */
+#define R300_PFS_PARAM_0_X 0x4C00
+#define R300_PFS_PARAM_0_Y 0x4C04
+#define R300_PFS_PARAM_0_Z 0x4C08
+#define R300_PFS_PARAM_0_W 0x4C0C
+/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */
+#define R300_PFS_PARAM_31_X 0x4DF0
+#define R300_PFS_PARAM_31_Y 0x4DF4
+#define R300_PFS_PARAM_31_Z 0x4DF8
+#define R300_PFS_PARAM_31_W 0x4DFC
+
+/* Notes:
+// - AFAIK fglrx always sets BLEND_UNKNOWN when blending is used in the application
+// - AFAIK fglrx always sets BLEND_NO_SEPARATE when CBLEND and ABLEND are set to the same
+// function (both registers are always set up completely in any case)
+// - Most blend flags are simply copied from R200 and not tested yet */
+#define R300_RB3D_CBLEND 0x4E04
+#define R300_RB3D_ABLEND 0x4E08
+ /* the following only appear in CBLEND */
+# define R300_BLEND_ENABLE (1 << 0)
+# define R300_BLEND_UNKNOWN (3 << 1)
+# define R300_BLEND_NO_SEPARATE (1 << 3)
+ /* the following are shared between CBLEND and ABLEND */
+# define R300_FCN_MASK (3 << 12)
+# define R300_COMB_FCN_ADD_CLAMP (0 << 12)
+# define R300_COMB_FCN_ADD_NOCLAMP (1 << 12)
+# define R300_COMB_FCN_SUB_CLAMP (2 << 12)
+# define R300_COMB_FCN_SUB_NOCLAMP (3 << 12)
+# define R300_SRC_BLEND_GL_ZERO (32 << 16)
+# define R300_SRC_BLEND_GL_ONE (33 << 16)
+# define R300_SRC_BLEND_GL_SRC_COLOR (34 << 16)
+# define R300_SRC_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 16)
+# define R300_SRC_BLEND_GL_DST_COLOR (36 << 16)
+# define R300_SRC_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 16)
+# define R300_SRC_BLEND_GL_SRC_ALPHA (38 << 16)
+# define R300_SRC_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 16)
+# define R300_SRC_BLEND_GL_DST_ALPHA (40 << 16)
+# define R300_SRC_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 16)
+# define R300_SRC_BLEND_GL_SRC_ALPHA_SATURATE (42 << 16)
+# define R300_SRC_BLEND_MASK (63 << 16)
+# define R300_DST_BLEND_GL_ZERO (32 << 24)
+# define R300_DST_BLEND_GL_ONE (33 << 24)
+# define R300_DST_BLEND_GL_SRC_COLOR (34 << 24)
+# define R300_DST_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 24)
+# define R300_DST_BLEND_GL_DST_COLOR (36 << 24)
+# define R300_DST_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 24)
+# define R300_DST_BLEND_GL_SRC_ALPHA (38 << 24)
+# define R300_DST_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 24)
+# define R300_DST_BLEND_GL_DST_ALPHA (40 << 24)
+# define R300_DST_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 24)
+# define R300_DST_BLEND_MASK (63 << 24)
+#define R300_RB3D_COLORMASK 0x4E0C
+# define R300_COLORMASK0_B (1<<0)
+# define R300_COLORMASK0_G (1<<1)
+# define R300_COLORMASK0_R (1<<2)
+# define R300_COLORMASK0_A (1<<3)
+
+/* gap */
+#define R300_RB3D_COLOROFFSET0 0x4E28
+# define R300_COLOROFFSET_MASK 0xFFFFFFF0 /* GUESS */
+#define R300_RB3D_COLOROFFSET1 0x4E2C /* GUESS */
+#define R300_RB3D_COLOROFFSET2 0x4E30 /* GUESS */
+#define R300_RB3D_COLOROFFSET3 0x4E34 /* GUESS */
+/* gap */
+/* Bit 16: Larger tiles
+// Bit 17: 4x2 tiles
+// Bit 18: Extremely weird tile like, but some pixels duplicated? */
+#define R300_RB3D_COLORPITCH0 0x4E38
+# define R300_COLORPITCH_MASK 0x00001FF8 /* GUESS */
+# define R300_COLOR_TILE_ENABLE (1 << 16) /* GUESS */
+# define R300_COLOR_MICROTILE_ENABLE (1 << 17) /* GUESS */
+# define R300_COLOR_ENDIAN_NO_SWAP (0 << 18) /* GUESS */
+# define R300_COLOR_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */
+# define R300_COLOR_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */
+# define R300_COLOR_FORMAT_RGB565 (2 << 22)
+# define R300_COLOR_FORMAT_ARGB8888 (3 << 22)
+#define R300_RB3D_COLORPITCH1 0x4E3C /* GUESS */
+#define R300_RB3D_COLORPITCH2 0x4E40 /* GUESS */
+#define R300_RB3D_COLORPITCH3 0x4E44 /* GUESS */
+
+/* gap */
+/* Guess by Vladimir.
+// Set to 0A before 3D operations, set to 02 afterwards. */
+#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C
+# define R300_RB3D_DSTCACHE_02 0x00000002
+# define R300_RB3D_DSTCACHE_0A 0x0000000A
+
+/* gap */
+/* There seems to be no "write only" setting, so use Z-test = ALWAYS for this. */
+/* Bit (1<<8) is the "test" bit. so plain write is 6 - vd */
+#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00
+# define R300_RB3D_Z_DISABLED_1 0x00000010 /* GUESS */
+# define R300_RB3D_Z_DISABLED_2 0x00000014 /* GUESS */
+# define R300_RB3D_Z_TEST 0x00000012
+# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
+# define R300_RB3D_Z_WRITE_ONLY 0x00000006
+
+# define R300_RB3D_Z_TEST 0x00000012
+# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
+# define R300_RB3D_Z_WRITE_ONLY 0x00000006
+# define R300_RB3D_STENCIL_ENABLE 0x00000001
+
+#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04
+ /* functions */
+# define R300_ZS_NEVER 0
+# define R300_ZS_LESS 1
+# define R300_ZS_LEQUAL 2
+# define R300_ZS_EQUAL 3
+# define R300_ZS_GEQUAL 4
+# define R300_ZS_GREATER 5
+# define R300_ZS_NOTEQUAL 6
+# define R300_ZS_ALWAYS 7
+# define R300_ZS_MASK 7
+ /* operations */
+# define R300_ZS_KEEP 0
+# define R300_ZS_ZERO 1
+# define R300_ZS_REPLACE 2
+# define R300_ZS_INCR 3
+# define R300_ZS_DECR 4
+# define R300_ZS_INVERT 5
+# define R300_ZS_INCR_WRAP 6
+# define R300_ZS_DECR_WRAP 7
+
+ /* front and back refer to operations done for front
+ and back faces, i.e. separate stencil function support */
+# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0
+# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3
+# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6
+# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9
+# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12
+# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15
+# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18
+# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21
+# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24
+
+
+
+#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08
+# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0
+# define R300_RB3D_ZS2_STENCIL_MASK 0xFF
+# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8
+# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16
+
+/* gap */
+
+#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10
+# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0)
+# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0)
+
+/* gap */
+#define R300_RB3D_DEPTHOFFSET 0x4F20
+#define R300_RB3D_DEPTHPITCH 0x4F24
+# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */
+# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */
+# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */
+# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */
+# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */
+# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */
+
+/* BEGIN: Vertex program instruction set
+// Every instruction is four dwords long:
+// DWORD 0: output and opcode
+// DWORD 1: first argument
+// DWORD 2: second argument
+// DWORD 3: third argument
+//
+// Notes:
+// - ABS r, a is implemented as MAX r, a, -a
+// - MOV is implemented as ADD to zero
+// - XPD is implemented as MUL + MAD
+// - FLR is implemented as FRC + ADD
+// - apparently, fglrx tries to schedule instructions so that there is at least
+// one instruction between the write to a temporary and the first read
+// from said temporary; however, violations of this scheduling are allowed
+// - register indices seem to be unrelated with OpenGL aliasing to conventional state
+// - only one attribute and one parameter can be loaded at a time; however, the
+// same attribute/parameter can be used for more than one argument
+// - the second software argument for POW is the third hardware argument (no idea why)
+// - MAD with only temporaries as input seems to use VPI_OUT_SELECT_MAD_2
+//
+// There is some magic surrounding LIT:
+// The single argument is replicated across all three inputs, but swizzled:
+// First argument: xyzy
+// Second argument: xyzx
+// Third argument: xyzw
+// Whenever the result is used later in the fragment program, fglrx forces x and w
+// to be 1.0 in the input selection; I don't know whether this is strictly necessary */
+#define R300_VPI_OUT_OP_DOT (1 << 0)
+#define R300_VPI_OUT_OP_MUL (2 << 0)
+#define R300_VPI_OUT_OP_ADD (3 << 0)
+#define R300_VPI_OUT_OP_MAD (4 << 0)
+#define R300_VPI_OUT_OP_DST (5 << 0)
+#define R300_VPI_OUT_OP_FRC (6 << 0)
+#define R300_VPI_OUT_OP_MAX (7 << 0)
+#define R300_VPI_OUT_OP_MIN (8 << 0)
+#define R300_VPI_OUT_OP_SGE (9 << 0)
+#define R300_VPI_OUT_OP_SLT (10 << 0)
+#define R300_VPI_OUT_OP_UNK12 (12 << 0) /* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, vector(scalar, vector) */
+#define R300_VPI_OUT_OP_EXP (65 << 0)
+#define R300_VPI_OUT_OP_LOG (66 << 0)
+#define R300_VPI_OUT_OP_UNK67 (67 << 0) /* Used in fog computations, scalar(scalar) */
+#define R300_VPI_OUT_OP_LIT (68 << 0)
+#define R300_VPI_OUT_OP_POW (69 << 0)
+#define R300_VPI_OUT_OP_RCP (70 << 0)
+#define R300_VPI_OUT_OP_RSQ (72 << 0)
+#define R300_VPI_OUT_OP_UNK73 (73 << 0) /* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, scalar(scalar) */
+#define R300_VPI_OUT_OP_EX2 (75 << 0)
+#define R300_VPI_OUT_OP_LG2 (76 << 0)
+#define R300_VPI_OUT_OP_MAD_2 (128 << 0)
+#define R300_VPI_OUT_OP_UNK129 (129 << 0) /* all temps, vector(scalar, vector, vector) */
+
+#define R300_VPI_OUT_REG_CLASS_TEMPORARY (0 << 8)
+#define R300_VPI_OUT_REG_CLASS_RESULT (2 << 8)
+#define R300_VPI_OUT_REG_CLASS_MASK (31 << 8)
+
+#define R300_VPI_OUT_REG_INDEX_SHIFT 13
+#define R300_VPI_OUT_REG_INDEX_MASK (31 << 13) /* GUESS based on fglrx native limits */
+
+#define R300_VPI_OUT_WRITE_X (1 << 20)
+#define R300_VPI_OUT_WRITE_Y (1 << 21)
+#define R300_VPI_OUT_WRITE_Z (1 << 22)
+#define R300_VPI_OUT_WRITE_W (1 << 23)
+
+#define R300_VPI_IN_REG_CLASS_TEMPORARY (0 << 0)
+#define R300_VPI_IN_REG_CLASS_ATTRIBUTE (1 << 0)
+#define R300_VPI_IN_REG_CLASS_PARAMETER (2 << 0)
+#define R300_VPI_IN_REG_CLASS_NONE (9 << 0)
+#define R300_VPI_IN_REG_CLASS_MASK (31 << 0) /* GUESS */
+
+#define R300_VPI_IN_REG_INDEX_SHIFT 5
+#define R300_VPI_IN_REG_INDEX_MASK (255 << 5) /* GUESS based on fglrx native limits */
+
+/* The R300 can select components from the input register arbitrarily.
+// Use the following constants, shifted by the component shift you
+// want to select */
+#define R300_VPI_IN_SELECT_X 0
+#define R300_VPI_IN_SELECT_Y 1
+#define R300_VPI_IN_SELECT_Z 2
+#define R300_VPI_IN_SELECT_W 3
+#define R300_VPI_IN_SELECT_ZERO 4
+#define R300_VPI_IN_SELECT_ONE 5
+#define R300_VPI_IN_SELECT_MASK 7
+
+#define R300_VPI_IN_X_SHIFT 13
+#define R300_VPI_IN_Y_SHIFT 16
+#define R300_VPI_IN_Z_SHIFT 19
+#define R300_VPI_IN_W_SHIFT 22
+
+#define R300_VPI_IN_NEG_X (1 << 25)
+#define R300_VPI_IN_NEG_Y (1 << 26)
+#define R300_VPI_IN_NEG_Z (1 << 27)
+#define R300_VPI_IN_NEG_W (1 << 28)
+/* END */
+
+//BEGIN: Packet 3 commands
+
+// A primitive emission dword.
+#define R300_PRIM_TYPE_NONE (0 << 0)
+#define R300_PRIM_TYPE_POINT (1 << 0)
+#define R300_PRIM_TYPE_LINE (2 << 0)
+#define R300_PRIM_TYPE_LINE_STRIP (3 << 0)
+#define R300_PRIM_TYPE_TRI_LIST (4 << 0)
+#define R300_PRIM_TYPE_TRI_FAN (5 << 0)
+#define R300_PRIM_TYPE_TRI_STRIP (6 << 0)
+#define R300_PRIM_TYPE_TRI_TYPE2 (7 << 0)
+#define R300_PRIM_TYPE_RECT_LIST (8 << 0)
+#define R300_PRIM_TYPE_3VRT_POINT_LIST (9 << 0)
+#define R300_PRIM_TYPE_3VRT_LINE_LIST (10 << 0)
+#define R300_PRIM_TYPE_POINT_SPRITES (11 << 0) // GUESS (based on r200)
+#define R300_PRIM_TYPE_LINE_LOOP (12 << 0)
+#define R300_PRIM_TYPE_QUADS (13 << 0)
+#define R300_PRIM_TYPE_QUAD_STRIP (14 << 0)
+#define R300_PRIM_TYPE_POLYGON (15 << 0)
+#define R300_PRIM_TYPE_MASK 0xF
+#define R300_PRIM_WALK_IND (1 << 4)
+#define R300_PRIM_WALK_LIST (2 << 4)
+#define R300_PRIM_WALK_RING (3 << 4)
+#define R300_PRIM_WALK_MASK (3 << 4)
+#define R300_PRIM_COLOR_ORDER_BGRA (0 << 6) // GUESS (based on r200)
+#define R300_PRIM_COLOR_ORDER_RGBA (1 << 6) // GUESS
+#define R300_PRIM_NUM_VERTICES_SHIFT 16
+
+// Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
+// Two parameter dwords:
+// 0. The first parameter appears to be always 0
+// 1. The second parameter is a standard primitive emission dword.
+#define R300_PACKET3_3D_DRAW_VBUF 0x00002800
+
+// Specify the full set of vertex arrays as (address, stride).
+// The first parameter is the number of vertex arrays specified.
+// The rest of the command is a variable length list of blocks, where
+// each block is three dwords long and specifies two arrays.
+// The first dword of a block is split into two words, the lower significant
+// word refers to the first array, the more significant word to the second
+// array in the block.
+// The low byte of each word contains the size of an array entry in dwords,
+// the high byte contains the stride of the array.
+// The second dword of a block contains the pointer to the first array,
+// the third dword of a block contains the pointer to the second array.
+// Note that if the total number of arrays is odd, the third dword of
+// the last block is omitted.
+#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00
+
+#define R300_PACKET3_INDX_BUFFER 0x00003300
+# define R300_EB_UNK1_SHIFT 24
+# define R300_EB_UNK1 (0x80<<24)
+# define R300_EB_UNK2 0x0810
+#define R300_PACKET3_3D_DRAW_INDX_2 0x00003600
+
+//END
+
+#endif /* _R300_REG_H */
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index f24a27c..6d9080a 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -32,6 +32,7 @@
#include "drm.h"
#include "radeon_drm.h"
#include "radeon_drv.h"
+#include "r300_reg.h"
#define RADEON_FIFO_DEBUG 0
@@ -1151,6 +1152,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev,
#if __OS_HAS_AGP
if ( !dev_priv->is_pci ) {
+ /* set RADEON_AGP_BASE here instead of relying on X from user space */
+ RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR,
dev_priv->ring_rptr->offset
- dev->agp->base
@@ -1626,6 +1629,9 @@ int radeon_cp_init( DRM_IOCTL_ARGS )
DRM_COPY_FROM_USER_IOCTL( init, (drm_radeon_init_t __user *)data, sizeof(init) );
+ if(init.func == RADEON_INIT_R300_CP)
+ r300_init_reg_flags();
+
switch ( init.func ) {
case RADEON_INIT_CP:
case RADEON_INIT_R200_CP:
@@ -2040,12 +2046,19 @@ int radeon_driver_preinit(struct drm_device *dev, unsigned long flags)
case CHIP_RV200:
case CHIP_R200:
case CHIP_R300:
+ case CHIP_R420:
dev_priv->flags |= CHIP_HAS_HIERZ;
break;
default:
/* all other chips have no hierarchical z buffer */
break;
}
+
+ if (drm_device_is_agp(dev))
+ dev_priv->flags |= CHIP_IS_AGP;
+
+ DRM_DEBUG("%s card detected\n",
+ ((dev_priv->flags & CHIP_IS_AGP) ? "AGP" : "PCI"));
return ret;
}
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index c1e62d0..3792798 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -195,6 +195,52 @@ typedef union {
#define RADEON_WAIT_2D 0x1
#define RADEON_WAIT_3D 0x2
+/* Allowed parameters for R300_CMD_PACKET3
+ */
+#define R300_CMD_PACKET3_CLEAR 0
+#define R300_CMD_PACKET3_RAW 1
+
+/* Commands understood by cmd_buffer ioctl for R300.
+ * The interface has not been stabilized, so some of these may be removed
+ * and eventually reordered before stabilization.
+ */
+#define R300_CMD_PACKET0 1
+#define R300_CMD_VPU 2 /* emit vertex program upload */
+#define R300_CMD_PACKET3 3 /* emit a packet3 */
+#define R300_CMD_END3D 4 /* emit sequence ending 3d rendering */
+#define R300_CMD_CP_DELAY 5
+#define R300_CMD_DMA_DISCARD 6
+#define R300_CMD_WAIT 7
+# define R300_WAIT_2D 0x1
+# define R300_WAIT_3D 0x2
+# define R300_WAIT_2D_CLEAN 0x3
+# define R300_WAIT_3D_CLEAN 0x4
+
+typedef union {
+ unsigned int u;
+ struct {
+ unsigned char cmd_type, pad0, pad1, pad2;
+ } header;
+ struct {
+ unsigned char cmd_type, count, reglo, reghi;
+ } packet0;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi;
+ } vpu;
+ struct {
+ unsigned char cmd_type, packet, pad0, pad1;
+ } packet3;
+ struct {
+ unsigned char cmd_type, packet;
+ unsigned short count; /* amount of packet2 to emit */
+ } delay;
+ struct {
+ unsigned char cmd_type, buf_idx, pad0, pad1;
+ } dma;
+ struct {
+ unsigned char cmd_type, flags, pad0, pad1;
+ } wait;
+} drm_r300_cmd_header_t;
#define RADEON_FRONT 0x1
#define RADEON_BACK 0x2
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index e701dff..f12a963 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -82,9 +82,10 @@
* - Add support for r100 cube maps
* 1.16- Add R200_EMIT_PP_TRI_PERF_CNTL packet to support brilinear
* texture filtering on r200
+ * 1.17- Add initial support for R300 (3D).
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 16
+#define DRIVER_MINOR 17
#define DRIVER_PATCHLEVEL 0
#define GET_RING_HEAD(dev_priv) DRM_READ32( (dev_priv)->ring_rptr, 0 )
@@ -106,7 +107,9 @@ enum radeon_family {
CHIP_RV280,
CHIP_R300,
CHIP_RS300,
+ CHIP_R350,
CHIP_RV350,
+ CHIP_R420,
CHIP_LAST,
};
@@ -321,6 +324,14 @@ extern int radeon_postcleanup( struct drm_device *dev );
extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
+
+/* r300_cmdbuf.c */
+extern void r300_init_reg_flags(void);
+
+extern int r300_do_cp_cmdbuf(drm_device_t* dev, DRMFILE filp,
+ drm_file_t* filp_priv,
+ drm_radeon_cmd_buffer_t* cmdbuf);
+
/* Flags for stats.boxes
*/
#define RADEON_BOX_DMA_IDLE 0x1
@@ -358,6 +369,11 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
#define RADEON_CRTC2_OFFSET 0x0324
#define RADEON_CRTC2_OFFSET_CNTL 0x0328
+#define RADEON_MPP_TB_CONFIG 0x01c0
+#define RADEON_MEM_CNTL 0x0140
+#define RADEON_MEM_SDRAM_MODE_REG 0x0158
+#define RADEON_AGP_BASE 0x0170
+
#define RADEON_RB3D_COLOROFFSET 0x1c40
#define RADEON_RB3D_COLORPITCH 0x1c48
@@ -652,16 +668,27 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd,
#define RADEON_CP_PACKET1 0x40000000
#define RADEON_CP_PACKET2 0x80000000
#define RADEON_CP_PACKET3 0xC0000000
+# define RADEON_CP_NOP 0x00001000
+# define RADEON_CP_NEXT_CHAR 0x00001900
+# define RADEON_CP_PLY_NEXTSCAN 0x00001D00
+# define RADEON_CP_SET_SCISSORS 0x00001E00
+ /* GEN_INDX_PRIM is unsupported starting with R300 */
# define RADEON_3D_RNDR_GEN_INDX_PRIM 0x00002300
# define RADEON_WAIT_FOR_IDLE 0x00002600
# define RADEON_3D_DRAW_VBUF 0x00002800
# define RADEON_3D_DRAW_IMMD 0x00002900
# define RADEON_3D_DRAW_INDX 0x00002A00
+# define RADEON_CP_LOAD_PALETTE 0x00002C00
# define RADEON_3D_LOAD_VBPNTR 0x00002F00
# define RADEON_MPEG_IDCT_MACROBLOCK 0x00003000
# define RADEON_MPEG_IDCT_MACROBLOCK_REV 0x00003100
# define RADEON_3D_CLEAR_ZMASK 0x00003200
+# define RADEON_CP_INDX_BUFFER 0x00003300
+# define RADEON_CP_3D_DRAW_VBUF_2 0x00003400
+# define RADEON_CP_3D_DRAW_IMMD_2 0x00003500
+# define RADEON_CP_3D_DRAW_INDX_2 0x00003600
# define RADEON_3D_CLEAR_HIZ 0x00003700
+# define RADEON_CP_3D_CLEAR_CMASK 0x00003802
# define RADEON_CNTL_HOSTDATA_BLT 0x00009400
# define RADEON_CNTL_PAINT_MULTI 0x00009A00
# define RADEON_CNTL_BITBLT_MULTI 0x00009B00
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 1f79e24..d57accd 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -2797,6 +2797,17 @@ static int radeon_cp_cmdbuf( DRM_IOCTL_ARGS )
orig_nbox = cmdbuf.nbox;
+ if(dev_priv->microcode_version == UCODE_R300) {
+ int temp;
+ temp=r300_do_cp_cmdbuf(dev, filp, filp_priv, &cmdbuf);
+
+ if (orig_bufsz != 0)
+ drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+
+ return temp;
+ }
+
+ /* microcode_version != r300 */
while ( cmdbuf.bufsz >= sizeof(header) ) {
header.i = *(int *)cmdbuf.buf;
OpenPOWER on IntegriCloud