summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
authorAfzal Mohammed <afzal@ti.com>2013-12-02 17:48:57 +0530
committerNishanth Menon <nm@ti.com>2014-05-05 14:34:37 -0500
commit27b7d5f3cc49f2e5cd6c005d73696058b7140c5c (patch)
treed8a8eb65bf9b001471aa4bddf87542683b07455e /drivers/bus
parent53a848be0a65c6fb105eb5ecb8b8b3edfa0f91ad (diff)
downloadop-kernel-dev-27b7d5f3cc49f2e5cd6c005d73696058b7140c5c.zip
op-kernel-dev-27b7d5f3cc49f2e5cd6c005d73696058b7140c5c.tar.gz
bus: omap_l3_noc: Add AM4372 interconnect error data
Add AM4372 information to handle L3 error. AM4372 has two clk domains 100f and 200s. Provide flagmux and data associated with it. NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware team, L3 timeout error cannot be cleared the normal way (by setting bit 31 in STDERRLOG_MAIN), instead it may be required to do system reset. L3 error handler can't help in such scenarios. Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as done for undocumented bits. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/omap_l3_noc.c1
-rw-r--r--drivers/bus/omap_l3_noc.h91
2 files changed, 92 insertions, 0 deletions
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 6cdd02e..531ae59 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -231,6 +231,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
+ {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
};
MODULE_DEVICE_TABLE(of, l3_noc_match);
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 9562a75..551e010 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -381,4 +381,95 @@ static const struct omap_l3 dra_l3_data = {
.mst_addr_mask = 0xFC,
};
+/* AM4372 data */
+static struct l3_target_data am4372_l3_target_data_200f[] = {
+ {0xf00, "EMIF",},
+ {0x1200, "DES",},
+ {0x400, "OCMCRAM",},
+ {0x700, "TPTC0",},
+ {0x800, "TPTC1",},
+ {0x900, "TPTC2"},
+ {0xb00, "TPCC",},
+ {0xd00, "DEBUGSS",},
+ {0xdead, L3_TARGET_NOT_SUPPORTED,},
+ {0x200, "SHA",},
+ {0xc00, "SGX530",},
+ {0x500, "AES0",},
+ {0xa00, "L4_FAST",},
+ {0x300, "MPUSS_L2_RAM",},
+ {0x100, "ICSS",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_200f = {
+ .offset = 0x1000,
+ .l3_targ = am4372_l3_target_data_200f,
+ .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f),
+};
+
+static struct l3_target_data am4372_l3_target_data_100s[] = {
+ {0x100, "L4_PER_0",},
+ {0x200, "L4_PER_1",},
+ {0x300, "L4_PER_2",},
+ {0x400, "L4_PER_3",},
+ {0x800, "McASP0",},
+ {0x900, "McASP1",},
+ {0xC00, "MMCHS2",},
+ {0x700, "GPMC",},
+ {0xD00, "L4_FW",},
+ {0xdead, L3_TARGET_NOT_SUPPORTED,},
+ {0x500, "ADCTSC",},
+ {0xE00, "L4_WKUP",},
+ {0xA00, "MAG_CARD",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_100s = {
+ .offset = 0x600,
+ .l3_targ = am4372_l3_target_data_100s,
+ .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s),
+};
+
+static struct l3_masters_data am4372_l3_masters[] = {
+ { 0x0, "M1 (128-bit)"},
+ { 0x1, "M2 (64-bit)"},
+ { 0x4, "DAP"},
+ { 0x5, "P1500"},
+ { 0xC, "ICSS0"},
+ { 0xD, "ICSS1"},
+ { 0x14, "Wakeup Processor"},
+ { 0x18, "TPTC0 Read"},
+ { 0x19, "TPTC0 Write"},
+ { 0x1A, "TPTC1 Read"},
+ { 0x1B, "TPTC1 Write"},
+ { 0x1C, "TPTC2 Read"},
+ { 0x1D, "TPTC2 Write"},
+ { 0x20, "SGX530"},
+ { 0x21, "OCP WP Traffic Probe"},
+ { 0x22, "OCP WP DMA Profiling"},
+ { 0x23, "OCP WP Event Trace"},
+ { 0x25, "DSS"},
+ { 0x28, "Crypto DMA RD"},
+ { 0x29, "Crypto DMA WR"},
+ { 0x2C, "VPFE0"},
+ { 0x2D, "VPFE1"},
+ { 0x30, "GEMAC"},
+ { 0x34, "USB0 RD"},
+ { 0x35, "USB0 WR"},
+ { 0x36, "USB1 RD"},
+ { 0x37, "USB1 WR"},
+};
+
+static struct l3_flagmux_data *am4372_l3_flagmux[] = {
+ &am4372_l3_flagmux_200f,
+ &am4372_l3_flagmux_100s,
+};
+
+static const struct omap_l3 am4372_l3_data = {
+ .l3_flagmux = am4372_l3_flagmux,
+ .num_modules = ARRAY_SIZE(am4372_l3_flagmux),
+ .l3_masters = am4372_l3_masters,
+ .num_masters = ARRAY_SIZE(am4372_l3_masters),
+ /* All 6 bits of register field used to distinguish initiator */
+ .mst_addr_mask = 0x3F,
+};
+
#endif /* __OMAP_L3_NOC_H */
OpenPOWER on IntegriCloud