[PATCH] Remove acsi.c

Originally from Boaz Harrosh <bharrosh@panasas.com>

It hasn't been working in 2.5 or 2.6 ever, since it's still buffer_head
based.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

3 files changed, 1 insertions, 1858 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b4c8319..d6ad7b3 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -56,40 +56,9 @@ config AMIGA_Z2RAM
 	  To compile this driver as a module, choose M here: the
 	  module will be called z2ram.
 
-config ATARI_ACSI
-	tristate "Atari ACSI support"
-	depends on ATARI && BROKEN
-	---help---
-	  This enables support for the Atari ACSI interface. The driver
-	  supports hard disks and CD-ROMs, which have 512-byte sectors, or can
-	  be switched to that mode. Due to the ACSI command format, only disks
-	  up to 1 GB are supported. Special support for certain ACSI to SCSI
-	  adapters, which could relax that, isn't included yet. The ACSI
-	  driver is also the basis for certain other drivers for devices
-	  attached to the ACSI bus: Atari SLM laser printer, BioNet-100
-	  Ethernet, and PAMsNet Ethernet. If you want to use one of these
-	  devices, you need ACSI support, too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acsi.
-
-comment "Some devices (e.g. CD jukebox) support multiple LUNs"
-	depends on ATARI && ATARI_ACSI
-
-config ACSI_MULTI_LUN
-	bool "Probe all LUNs on each ACSI device"
-	depends on ATARI_ACSI
-	help
-	  If you have a ACSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, you should say Y here so that all
-	  will be found by the ACSI driver. An ACSI device with multiple LUNs
-	  acts logically like multiple ACSI devices. The vast majority of ACSI
-	  devices have only one LUN, and so most people can say N here and
-	  should in fact do so, because it is safer.
-
 config ATARI_SLM
 	tristate "Atari SLM laser printer support"
-	depends on ATARI && ATARI_ACSI!=n
+	depends on ATARI
 	help
 	  If you have an Atari SLM laser printer, say Y to include support for
 	  it in the kernel. Otherwise, say N. This driver is also available as
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index dd88e33..e5f98ac 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
-obj-$(CONFIG_ATARI_ACSI)	+= acsi.o
 obj-$(CONFIG_ATARI_SLM)		+= acsi_slm.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= rd.o
diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c
deleted file mode 100644
index e3d9152..0000000
--- a/drivers/block/acsi.c
+++ /dev/null
@@ -1,1825 +0,0 @@
-/*
- * acsi.c -- Device driver for Atari ACSI hard disks
- *
- * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * Some parts are based on hd.c by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-/*
- * Still to in this file:
- *  - If a command ends with an error status (!= 0), the following
- *    REQUEST SENSE commands (4 to fill the ST-DMA FIFO) are done by
- *    polling the _IRQ signal (not interrupt-driven). This should be
- *    avoided in future because it takes up a non-neglectible time in
- *    the interrupt service routine while interrupts are disabled.
- *    Maybe a timer interrupt will get lost :-(
- */
-
-/*
- * General notes:
- *
- *  - All ACSI devices (disks, CD-ROMs, ...) use major number 28.
- *    Minors are organized like it is with SCSI: The upper 4 bits
- *    identify the device, the lower 4 bits the partition.
- *    The device numbers (the upper 4 bits) are given in the same
- *    order as the devices are found on the bus.
- *  - Up to 8 LUNs are supported for each target (if CONFIG_ACSI_MULTI_LUN
- *    is defined), but only a total of 16 devices (due to minor
- *    numbers...). Note that Atari allows only a maximum of 4 targets
- *    (i.e. controllers, not devices) on the ACSI bus!
- *  - A optimizing scheme similar to SCSI scatter-gather is implemented.
- *  - Removable media are supported. After a medium change to device
- *    is reinitialized (partition check etc.). Also, if the device
- *    knows the PREVENT/ALLOW MEDIUM REMOVAL command, the door should
- *    be locked and unlocked when mounting the first or unmounting the
- *    last filesystem on the device. The code is untested, because I
- *    don't have a removable hard disk.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */
-#include <scsi/scsi_ioctl.h>
-#include <linux/hdreg.h> /* for HDIO_GETGEO */
-#include <linux/blkpg.h>
-#include <linux/buffer_head.h>
-#include <linux/blkdev.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-
-static void (*do_acsi)(void) = NULL;
-static struct request_queue *acsi_queue;
-#define QUEUE (acsi_queue)
-#define CURRENT elv_next_request(acsi_queue)
-
-#define DEBUG
-#undef DEBUG_DETECT
-#undef NO_WRITE
-
-#define MAX_ERRORS     		8	/* Max read/write errors/sector */
-#define MAX_LUN				8	/* Max LUNs per target */
-#define MAX_DEV		   		16
-
-#define ACSI_BUFFER_SIZE			(16*1024) /* "normal" ACSI buffer size */
-#define ACSI_BUFFER_MINSIZE			(2048) 	  /* min. buf size if ext. DMA */
-#define ACSI_BUFFER_SIZE_ORDER	 	2		  /* order size for above */
-#define ACSI_BUFFER_MINSIZE_ORDER	0 	  	  /* order size for above */
-#define ACSI_BUFFER_SECTORS	(ACSI_BUFFER_SIZE/512)
-
-#define ACSI_BUFFER_ORDER \
-	(ATARIHW_PRESENT(EXTD_DMA) ? \
-	 ACSI_BUFFER_MINSIZE_ORDER : \
-	 ACSI_BUFFER_SIZE_ORDER)
-
-#define ACSI_TIMEOUT		(4*HZ)
-
-/* minimum delay between two commands */
-
-#define COMMAND_DELAY 500
-
-typedef enum {
-	NONE, HARDDISK, CDROM
-} ACSI_TYPE;
-
-struct acsi_info_struct {
-	ACSI_TYPE		type;			/* type of device */
-	unsigned		target;			/* target number */
-	unsigned		lun;			/* LUN in target controller */
-	unsigned		removable : 1;	/* Flag for removable media */
-	unsigned		read_only : 1;	/* Flag for read only devices */
-	unsigned		old_atari_disk : 1; /* Is an old Atari disk       */
-	unsigned		changed : 1;	/* Medium has been changed */
-	unsigned long 	size;			/* #blocks */
-	int access_count;
-} acsi_info[MAX_DEV];
-
-/*
- *	SENSE KEYS
- */
-
-#define NO_SENSE		0x00
-#define RECOVERED_ERROR 	0x01
-#define NOT_READY		0x02
-#define MEDIUM_ERROR		0x03
-#define HARDWARE_ERROR		0x04
-#define ILLEGAL_REQUEST 	0x05
-#define UNIT_ATTENTION		0x06
-#define DATA_PROTECT		0x07
-#define BLANK_CHECK		0x08
-#define COPY_ABORTED		0x0a
-#define ABORTED_COMMAND 	0x0b
-#define VOLUME_OVERFLOW 	0x0d
-#define MISCOMPARE		0x0e
-
-
-/*
- *	DEVICE TYPES
- */
-
-#define TYPE_DISK	0x00
-#define TYPE_TAPE	0x01
-#define TYPE_WORM	0x04
-#define TYPE_ROM	0x05
-#define TYPE_MOD	0x07
-#define TYPE_NO_LUN	0x7f
-
-/* The data returned by MODE SENSE differ between the old Atari
- * hard disks and SCSI disks connected to ACSI. In the following, both
- * formats are defined and some macros to operate on them potably.
- */
-
-typedef struct {
-	unsigned long	dummy[2];
-	unsigned long	sector_size;
-	unsigned char	format_code;
-#define ATARI_SENSE_FORMAT_FIX	1	
-#define ATARI_SENSE_FORMAT_CHNG	2
-	unsigned char	cylinders_h;
-	unsigned char	cylinders_l;
-	unsigned char	heads;
-	unsigned char	reduced_h;
-	unsigned char	reduced_l;
-	unsigned char	precomp_h;
-	unsigned char	precomp_l;
-	unsigned char	landing_zone;
-	unsigned char	steprate;
-	unsigned char	type;
-#define ATARI_SENSE_TYPE_FIXCHNG_MASK		4
-#define ATARI_SENSE_TYPE_SOFTHARD_MASK		8
-#define ATARI_SENSE_TYPE_FIX				4
-#define ATARI_SENSE_TYPE_CHNG				0
-#define ATARI_SENSE_TYPE_SOFT				0
-#define ATARI_SENSE_TYPE_HARD				8
-	unsigned char	sectors;
-} ATARI_SENSE_DATA;
-
-#define ATARI_CAPACITY(sd) \
-	(((int)((sd).cylinders_h<<8)|(sd).cylinders_l) * \
-	 (sd).heads * (sd).sectors)
-
-
-typedef struct {
-	unsigned char   dummy1;
-	unsigned char   medium_type;
-	unsigned char   dummy2;
-	unsigned char   descriptor_size;
-	unsigned long   block_count;
-	unsigned long   sector_size;
-	/* Page 0 data */
-	unsigned char	page_code;
-	unsigned char	page_size;
-	unsigned char	page_flags;
-	unsigned char	qualifier;
-} SCSI_SENSE_DATA;
-
-#define SCSI_CAPACITY(sd) 	((sd).block_count & 0xffffff)
-
-
-typedef union {
-	ATARI_SENSE_DATA	atari;
-	SCSI_SENSE_DATA		scsi;
-} SENSE_DATA;
-
-#define SENSE_TYPE_UNKNOWN	0
-#define SENSE_TYPE_ATARI	1
-#define SENSE_TYPE_SCSI		2
-
-#define SENSE_TYPE(sd)										\
-	(((sd).atari.dummy[0] == 8 &&							\
-	  ((sd).atari.format_code == 1 ||						\
-	   (sd).atari.format_code == 2)) ? SENSE_TYPE_ATARI :	\
-	 ((sd).scsi.dummy1 >= 11) ? SENSE_TYPE_SCSI :			\
-	 SENSE_TYPE_UNKNOWN)
-	 
-#define CAPACITY(sd)							\
-	(SENSE_TYPE(sd) == SENSE_TYPE_ATARI ?		\
-	 ATARI_CAPACITY((sd).atari) :				\
-	 SCSI_CAPACITY((sd).scsi))
-
-#define SECTOR_SIZE(sd)							\
-	(SENSE_TYPE(sd) == SENSE_TYPE_ATARI ?		\
-	 (sd).atari.sector_size :					\
-	 (sd).scsi.sector_size & 0xffffff)
-
-/* Default size if capacity cannot be determined (1 GByte) */
-#define	DEFAULT_SIZE	0x1fffff
-
-#define CARTRCH_STAT(aip,buf)						\
-	(aip->old_atari_disk ?						\
-	 (((buf)[0] & 0x7f) == 0x28) :					\
-	 ((((buf)[0] & 0x70) == 0x70) ?					\
-	  (((buf)[2] & 0x0f) == 0x06) :					\
-	  (((buf)[0] & 0x0f) == 0x06)))					\
-
-/* These two are also exported to other drivers that work on the ACSI bus and
- * need an ST-RAM buffer. */
-char 			*acsi_buffer;
-unsigned long 	phys_acsi_buffer;
-
-static int NDevices;
-
-static int				CurrentNReq;
-static int				CurrentNSect;
-static char				*CurrentBuffer;
-
-static DEFINE_SPINLOCK(acsi_lock);
-
-
-#define SET_TIMER()	mod_timer(&acsi_timer, jiffies + ACSI_TIMEOUT)
-#define CLEAR_TIMER()	del_timer(&acsi_timer)
-
-static unsigned long	STramMask;
-#define STRAM_ADDR(a)	(((a) & STramMask) == 0)
-
-
-
-/* ACSI commands */
-
-static char tur_cmd[6]        = { 0x00, 0, 0, 0, 0, 0 };
-static char modesense_cmd[6]  = { 0x1a, 0, 0, 0, 24, 0 };
-static char modeselect_cmd[6] = { 0x15, 0, 0, 0, 12, 0 };
-static char inquiry_cmd[6]    = { 0x12, 0, 0, 0,255, 0 };
-static char reqsense_cmd[6]   = { 0x03, 0, 0, 0, 4, 0 };
-static char read_cmd[6]       = { 0x08, 0, 0, 0, 0, 0 };
-static char write_cmd[6]      = { 0x0a, 0, 0, 0, 0, 0 };
-static char pa_med_rem_cmd[6] = { 0x1e, 0, 0, 0, 0, 0 };
-
-#define CMDSET_TARG_LUN(cmd,targ,lun)			\
-    do {						\
-		cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5;	\
-		cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5;	\
-	} while(0)
-
-#define CMDSET_BLOCK(cmd,blk)						\
-    do {											\
-		unsigned long __blk = (blk);				\
-		cmd[3] = __blk; __blk >>= 8;				\
-		cmd[2] = __blk; __blk >>= 8;				\
-		cmd[1] = (cmd[1] & 0xe0) | (__blk & 0x1f);	\
-	} while(0)
-
-#define CMDSET_LEN(cmd,len)						\
-	do {										\
-		cmd[4] = (len);							\
-	} while(0)
-
-/* ACSI errors (from REQUEST SENSE); There are two tables, one for the
- * old Atari disks and one for SCSI on ACSI disks.
- */
-
-struct acsi_error {
-	unsigned char	code;
-	const char		*text;
-} atari_acsi_errors[] = {
-	{ 0x00, "No error (??)" },
-	{ 0x01, "No index pulses" },
-	{ 0x02, "Seek not complete" },
-	{ 0x03, "Write fault" },
-	{ 0x04, "Drive not ready" },
-	{ 0x06, "No Track 00 signal" },
-	{ 0x10, "ECC error in ID field" },
-	{ 0x11, "Uncorrectable data error" },
-	{ 0x12, "ID field address mark not found" },
-	{ 0x13, "Data field address mark not found" },
-	{ 0x14, "Record not found" },
-	{ 0x15, "Seek error" },
-	{ 0x18, "Data check in no retry mode" },
-	{ 0x19, "ECC error during verify" },
-	{ 0x1a, "Access to bad block" },
-	{ 0x1c, "Unformatted or bad format" },
-	{ 0x20, "Invalid command" },
-	{ 0x21, "Invalid block address" },
-	{ 0x23, "Volume overflow" },
-	{ 0x24, "Invalid argument" },
-	{ 0x25, "Invalid drive number" },
-	{ 0x26, "Byte zero parity check" },
-	{ 0x28, "Cartride changed" },
-	{ 0x2c, "Error count overflow" },
-	{ 0x30, "Controller selftest failed" }
-},
-
-	scsi_acsi_errors[] = {
-	{ 0x00, "No error (??)" },
-	{ 0x01, "Recovered error" },
-	{ 0x02, "Drive not ready" },
-	{ 0x03, "Uncorrectable medium error" },
-	{ 0x04, "Hardware error" },
-	{ 0x05, "Illegal request" },
-	{ 0x06, "Unit attention (Reset or cartridge changed)" },
-	{ 0x07, "Data protection" },
-	{ 0x08, "Blank check" },
-	{ 0x0b, "Aborted Command" },
-	{ 0x0d, "Volume overflow" }
-};
-
-
-
-/***************************** Prototypes *****************************/
-
-static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int
-                        rwflag, int enable);
-static int acsi_reqsense( char *buffer, int targ, int lun);
-static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip);
-static irqreturn_t acsi_interrupt (int irq, void *data);
-static void unexpected_acsi_interrupt( void );
-static void bad_rw_intr( void );
-static void read_intr( void );
-static void write_intr( void);
-static void acsi_times_out( unsigned long dummy );
-static void copy_to_acsibuffer( void );
-static void copy_from_acsibuffer( void );
-static void do_end_requests( void );
-static void do_acsi_request( request_queue_t * );
-static void redo_acsi_request( void );
-static int acsi_ioctl( struct inode *inode, struct file *file, unsigned int
-                       cmd, unsigned long arg );
-static int acsi_open( struct inode * inode, struct file * filp );
-static int acsi_release( struct inode * inode, struct file * file );
-static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag );
-static int acsi_change_blk_size( int target, int lun);
-static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd );
-static int acsi_revalidate (struct gendisk *disk);
-
-/************************* End of Prototypes **************************/
-
-
-DEFINE_TIMER(acsi_timer, acsi_times_out, 0, 0);
-
-
-#ifdef CONFIG_ATARI_SLM
-
-extern int attach_slm( int target, int lun );
-extern int slm_init( void );
-
-#endif
-
-
-
-/***********************************************************************
- *
- *   ACSI primitives
- *
- **********************************************************************/
-
-
-/*
- * The following two functions wait for _IRQ to become Low or High,
- * resp., with a timeout. The 'timeout' parameter is in jiffies
- * (10ms).
- * If the functions are called with timer interrupts on (int level <
- * 6), the timeout is based on the 'jiffies' variable to provide exact
- * timeouts for device probing etc.
- * If interrupts are disabled, the number of tries is based on the
- * 'loops_per_jiffy' variable. A rough estimation is sufficient here...
- */
-
-#define INT_LEVEL													\
-	({	unsigned __sr;												\
-		__asm__ __volatile__ ( "movew	%/sr,%0" : "=dm" (__sr) );	\
-		(__sr >> 8) & 7;											\
-	})
-
-int acsi_wait_for_IRQ( unsigned timeout )
-
-{
-	if (INT_LEVEL < 6) {
-		unsigned long maxjif = jiffies + timeout;
-		while (time_before(jiffies, maxjif))
-			if (!(mfp.par_dt_reg & 0x20)) return( 1 );
-	}
-	else {
-		long tries = loops_per_jiffy / 8 * timeout;
-		while( --tries >= 0 )
-			if (!(mfp.par_dt_reg & 0x20)) return( 1 );
-	}		
-	return( 0 ); /* timeout! */
-}
-
-
-int acsi_wait_for_noIRQ( unsigned timeout )
-
-{
-	if (INT_LEVEL < 6) {
-		unsigned long maxjif = jiffies + timeout;
-		while (time_before(jiffies, maxjif))
-			if (mfp.par_dt_reg & 0x20) return( 1 );
-	}
-	else {
-		long tries = loops_per_jiffy * timeout / 8;
-		while( tries-- >= 0 )
-			if (mfp.par_dt_reg & 0x20) return( 1 );
-	}		
-	return( 0 ); /* timeout! */
-}
-
-static struct timeval start_time;
-
-void
-acsi_delay_start(void)
-{
-	do_gettimeofday(&start_time);
-}
-
-/* wait from acsi_delay_start to now usec (<1E6) usec */
-
-void
-acsi_delay_end(long usec)
-{
-	struct timeval end_time;
-	long deltau,deltas;
-	do_gettimeofday(&end_time);
-	deltau=end_time.tv_usec - start_time.tv_usec;
-	deltas=end_time.tv_sec - start_time.tv_sec;
-	if (deltas > 1 || deltas < 0)
-		return;
-	if (deltas > 0)
-		deltau += 1000*1000;
-	if (deltau >= usec)
-		return;
-	udelay(usec-deltau);
-}
-
-/* acsicmd_dma() sends an ACSI command and sets up the DMA to transfer
- * 'blocks' blocks of 512 bytes from/to 'buffer'.
- * Because the _IRQ signal is used for handshaking the command bytes,
- * the ACSI interrupt has to be disabled in this function. If the end
- * of the operation should be signalled by a real interrupt, it has to be
- * reenabled afterwards.
- */
-
-static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int rwflag, int enable)
-
-{	unsigned long	flags, paddr;
-	int				i;
-
-#ifdef NO_WRITE
-	if (rwflag || *cmd == 0x0a) {
-		printk( "ACSI: Write commands disabled!\n" );
-		return( 0 );
-	}
-#endif
-	
-	rwflag = rwflag ? 0x100 : 0;
-	paddr = virt_to_phys( buffer );
-
-	acsi_delay_end(COMMAND_DELAY);
-	DISABLE_IRQ();
-
-	local_irq_save(flags);
-	/* Low on A1 */
-	dma_wd.dma_mode_status = 0x88 | rwflag;
-	MFPDELAY();
-
-	/* set DMA address */
-	dma_wd.dma_lo = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	dma_wd.dma_md = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	if (ATARIHW_PRESENT(EXTD_DMA))
-		st_dma_ext_dmahi = (unsigned short)paddr;
-	else
-		dma_wd.dma_hi = (unsigned char)paddr;
-	MFPDELAY();
-	local_irq_restore(flags);
-
-	/* send the command bytes except the last */
-	for( i = 0; i < 5; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a | rwflag );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-
-	/* Clear FIFO and switch DMA to correct direction */  
-	dma_wd.dma_mode_status = 0x92 | (rwflag ^ 0x100);  
-	MFPDELAY();
-	dma_wd.dma_mode_status = 0x92 | rwflag;
-	MFPDELAY();
-
-	/* How many sectors for DMA */
-	dma_wd.fdc_acces_seccount = blocks;
-	MFPDELAY();
-	
-	/* send last command byte */
-	dma_wd.dma_mode_status = 0x8a | rwflag;
-	MFPDELAY();
-	DMA_LONG_WRITE( *cmd++, 0x0a | rwflag );
-	if (enable)
-		ENABLE_IRQ();
-	udelay(80);
-
-	return( 1 );
-}
-
-
-/*
- * acsicmd_nodma() sends an ACSI command that requires no DMA.
- */
-
-int acsicmd_nodma( const char *cmd, int enable)
-
-{	int	i;
-
-	acsi_delay_end(COMMAND_DELAY);
-	DISABLE_IRQ();
-
-	/* send first command byte */
-	dma_wd.dma_mode_status = 0x88;
-	MFPDELAY();
-	DMA_LONG_WRITE( *cmd++, 0x8a );
-	udelay(20);
-	if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-
-	/* send the intermediate command bytes */
-	for( i = 0; i < 4; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-
-	/* send last command byte */
-	DMA_LONG_WRITE( *cmd++, 0x0a );
-	if (enable)
-		ENABLE_IRQ();
-	udelay(80);
-	
-	return( 1 );
-	/* Note that the ACSI interrupt is still disabled after this
-	 * function. If you want to get the IRQ delivered, enable it manually!
-	 */
-}
-
-
-static int acsi_reqsense( char *buffer, int targ, int lun)
-
-{
-	CMDSET_TARG_LUN( reqsense_cmd, targ, lun);
-	if (!acsicmd_dma( reqsense_cmd, buffer, 1, 0, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	dma_cache_maintenance( virt_to_phys(buffer), 16, 0 );
-	
-	return( 1 );
-}	
-
-
-/*
- * ACSI status phase: get the status byte from the bus
- *
- * I've seen several times that a 0xff status is read, propably due to
- * a timing error. In this case, the procedure is repeated after the
- * next _IRQ edge.
- */
-
-int acsi_getstatus( void )
-
-{	int	status;
-
-	DISABLE_IRQ();
-	for(;;) {
-		if (!acsi_wait_for_IRQ( 100 )) {
-			acsi_delay_start();
-			return( -1 );
-		}
-		dma_wd.dma_mode_status = 0x8a;
-		MFPDELAY();
-		status = dma_wd.fdc_acces_seccount;
-		if (status != 0xff) break;
-#ifdef DEBUG
-		printk("ACSI: skipping 0xff status byte\n" );
-#endif
-		udelay(40);
-		acsi_wait_for_noIRQ( 20 );
-	}
-	dma_wd.dma_mode_status = 0x80;
-	udelay(40);
-	acsi_wait_for_noIRQ( 20 );
-
-	acsi_delay_start();
-	return( status & 0x1f ); /* mask of the device# */
-}
-
-
-#if (defined(CONFIG_ATARI_SLM) || defined(CONFIG_ATARI_SLM_MODULE))
-
-/* Receive data in an extended status phase. Needed by SLM printer. */
-
-int acsi_extstatus( char *buffer, int cnt )
-
-{	int	status;
-
-	DISABLE_IRQ();
-	udelay(80);
-	while( cnt-- > 0 ) {
-		if (!acsi_wait_for_IRQ( 40 )) return( 0 );
-		dma_wd.dma_mode_status = 0x8a;
-		MFPDELAY();
-		status = dma_wd.fdc_acces_seccount;
-		MFPDELAY();
-		*buffer++ = status & 0xff;
-		udelay(40);
-	}
-	return( 1 );
-}
-
-
-/* Finish an extended status phase */
-
-void acsi_end_extstatus( void )
-
-{
-	dma_wd.dma_mode_status = 0x80;
-	udelay(40);
-	acsi_wait_for_noIRQ( 20 );
-	acsi_delay_start();
-}
-
-
-/* Send data in an extended command phase */
-
-int acsi_extcmd( unsigned char *buffer, int cnt )
-
-{
-	while( cnt-- > 0 ) {
-		DMA_LONG_WRITE( *buffer++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-	return( 1 );
-}
-
-#endif
-
-
-static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip)
-
-{	int atari_err, i, errcode;
-	struct acsi_error *arr;
-
-	atari_err = aip->old_atari_disk;
-	if (atari_err)
-		errcode = errblk[0] & 0x7f;
-	else
-		if ((errblk[0] & 0x70) == 0x70)
-			errcode = errblk[2] & 0x0f;
-		else
-			errcode = errblk[0] & 0x0f;
-	
-	printk( KERN_ERR "ACSI error 0x%02x", errcode );
-
-	if (errblk[0] & 0x80)
-		printk( " for sector %d",
-				((errblk[1] & 0x1f) << 16) |
-				(errblk[2] << 8) | errblk[0] );
-
-	arr = atari_err ? atari_acsi_errors : scsi_acsi_errors;
-	i = atari_err ? sizeof(atari_acsi_errors)/sizeof(*atari_acsi_errors) :
-		            sizeof(scsi_acsi_errors)/sizeof(*scsi_acsi_errors);
-	
-	for( --i; i >= 0; --i )
-		if (arr[i].code == errcode) break;
-	if (i >= 0)
-		printk( ": %s\n", arr[i].text );
-}
-
-/*******************************************************************
- *
- * ACSI interrupt routine
- *   Test, if this is a ACSI interrupt and call the irq handler
- *   Otherwise ignore this interrupt.
- *
- *******************************************************************/
-
-static irqreturn_t acsi_interrupt(int irq, void *data )
-
-{	void (*acsi_irq_handler)(void) = do_acsi;
-
-	do_acsi = NULL;
-	CLEAR_TIMER();
-
-	if (!acsi_irq_handler)
-		acsi_irq_handler = unexpected_acsi_interrupt;
-	acsi_irq_handler();
-	return IRQ_HANDLED;
-}
-
-
-/******************************************************************
- *
- * The Interrupt handlers
- *
- *******************************************************************/
-
-
-static void unexpected_acsi_interrupt( void )
-
-{
-	printk( KERN_WARNING "Unexpected ACSI interrupt\n" );
-}
-
-
-/* This function is called in case of errors. Because we cannot reset
- * the ACSI bus or a single device, there is no other choice than
- * retrying several times :-(
- */
-
-static void bad_rw_intr( void )
-
-{
-	if (!CURRENT)
-		return;
-
-	if (++CURRENT->errors >= MAX_ERRORS)
-		end_request(CURRENT, 0);
-	/* Otherwise just retry */
-}
-
-
-static void read_intr( void )
-
-{	int		status;
-	
-	status = acsi_getstatus();
-	if (status != 0) {
-		struct gendisk *disk = CURRENT->rq_disk;
-		struct acsi_info_struct *aip = disk->private_data;
-		printk(KERN_ERR "%s: ", disk->disk_name);
-		if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun))
-			printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
-		else {
-			acsi_print_error(acsi_buffer, aip);
-			if (CARTRCH_STAT(aip, acsi_buffer))
-				aip->changed = 1;
-		}
-		ENABLE_IRQ();
-		bad_rw_intr();
-		redo_acsi_request();
-		return;
-	}
-
-	dma_cache_maintenance( virt_to_phys(CurrentBuffer), CurrentNSect*512, 0 );
-	if (CurrentBuffer == acsi_buffer)
-		copy_from_acsibuffer();
-
-	do_end_requests();
-	redo_acsi_request();
-}
-
-
-static void write_intr(void)
-
-{	int	status;
-
-	status = acsi_getstatus();
-	if (status != 0) {
-		struct gendisk *disk = CURRENT->rq_disk;
-		struct acsi_info_struct *aip = disk->private_data;
-		printk( KERN_ERR "%s: ", disk->disk_name);
-		if (!acsi_reqsense( acsi_buffer, aip->target, aip->lun))
-			printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
-		else {
-			acsi_print_error(acsi_buffer, aip);
-			if (CARTRCH_STAT(aip, acsi_buffer))
-				aip->changed = 1;
-		}
-		bad_rw_intr();
-		redo_acsi_request();
-		return;
-	}
-
-	do_end_requests();
-	redo_acsi_request();
-}
-
-
-static void acsi_times_out( unsigned long dummy )
-
-{
-	DISABLE_IRQ();
-	if (!do_acsi) return;
-
-	do_acsi = NULL;
-	printk( KERN_ERR "ACSI timeout\n" );
-	if (!CURRENT)
-	    return;
-	if (++CURRENT->errors >= MAX_ERRORS) {
-#ifdef DEBUG
-		printk( KERN_ERR "ACSI: too many errors.\n" );
-#endif
-		end_request(CURRENT, 0);
-	}
-
-	redo_acsi_request();
-}
-
-
-
-/***********************************************************************
- *
- *  Scatter-gather utility functions
- *
- ***********************************************************************/
-
-
-static void copy_to_acsibuffer( void )
-
-{	int					i;
-	char				*src, *dst;
-	struct buffer_head	*bh;
-	
-	src = CURRENT->buffer;
-	dst = acsi_buffer;
-	bh = CURRENT->bh;
-
-	if (!bh)
-		memcpy( dst, src, CurrentNSect*512 );
-	else
-		for( i = 0; i < CurrentNReq; ++i ) {
-			memcpy( dst, src, bh->b_size );
-			dst += bh->b_size;
-			if ((bh = bh->b_reqnext))
-				src = bh->b_data;
-		}
-}
-
-
-static void copy_from_acsibuffer( void )
-
-{	int					i;
-	char				*src, *dst;
-	struct buffer_head	*bh;
-	
-	dst = CURRENT->buffer;
-	src = acsi_buffer;
-	bh = CURRENT->bh;
-
-	if (!bh)
-		memcpy( dst, src, CurrentNSect*512 );
-	else
-		for( i = 0; i < CurrentNReq; ++i ) {
-			memcpy( dst, src, bh->b_size );
-			src += bh->b_size;
-			if ((bh = bh->b_reqnext))
-				dst = bh->b_data;
-		}
-}
-
-
-static void do_end_requests( void )
-
-{	int		i, n;
-
-	if (!CURRENT->bh) {
-		CURRENT->nr_sectors -= CurrentNSect;
-		CURRENT->current_nr_sectors -= CurrentNSect;
-		CURRENT->sector += CurrentNSect;
-		if (CURRENT->nr_sectors == 0)
-			end_request(CURRENT, 1);
-	}
-	else {
-		for( i = 0; i < CurrentNReq; ++i ) {
-			n = CURRENT->bh->b_size >> 9;
-			CURRENT->nr_sectors -= n;
-			CURRENT->current_nr_sectors -= n;
-			CURRENT->sector += n;
-			end_request(CURRENT, 1);
-		}
-	}
-}
-
-
-
-
-/***********************************************************************
- *
- *  do_acsi_request and friends
- *
- ***********************************************************************/
-
-static void do_acsi_request( request_queue_t * q )
-
-{
-	stdma_lock( acsi_interrupt, NULL );
-	redo_acsi_request();
-}
-
-
-static void redo_acsi_request( void )
-{
-	unsigned			block, target, lun, nsect;
-	char 				*buffer;
-	unsigned long		pbuffer;
-	struct buffer_head	*bh;
-	struct gendisk *disk;
-	struct acsi_info_struct *aip;
-
-  repeat:
-	CLEAR_TIMER();
-
-	if (do_acsi)
-		return;
-
-	if (!CURRENT) {
-		do_acsi = NULL;
-		ENABLE_IRQ();
-		stdma_release();
-		return;
-	}
-
-	disk = CURRENT->rq_disk;
-	aip = disk->private_data;
-	if (CURRENT->bh) {
-		if (!CURRENT->bh && !buffer_locked(CURRENT->bh))
-			panic("ACSI: block not locked");
-	}
-
-	block = CURRENT->sector;
-	if (block+CURRENT->nr_sectors >= get_capacity(disk)) {
-#ifdef DEBUG
-		printk( "%s: attempted access for blocks %d...%ld past end of device at block %ld.\n",
-		       disk->disk_name,
-		       block, block + CURRENT->nr_sectors - 1,
-		       get_capacity(disk));
-#endif
-		end_request(CURRENT, 0);
-		goto repeat;
-	}
-	if (aip->changed) {
-		printk( KERN_NOTICE "%s: request denied because cartridge has "
-				"been changed.\n", disk->disk_name);
-		end_request(CURRENT, 0);
-		goto repeat;
-	}
-	
-	target = aip->target;
-	lun    = aip->lun;
-
-	/* Find out how many sectors should be transferred from/to
-	 * consecutive buffers and thus can be done with a single command.
-	 */
-	buffer      = CURRENT->buffer;
-	pbuffer     = virt_to_phys(buffer);
-	nsect       = CURRENT->current_nr_sectors;
-	CurrentNReq = 1;
-
-	if ((bh = CURRENT->bh) && bh != CURRENT->bhtail) {
-		if (!STRAM_ADDR(pbuffer)) {
-			/* If transfer is done via the ACSI buffer anyway, we can
-			 * assemble as much bh's as fit in the buffer.
-			 */
-			while( (bh = bh->b_reqnext) ) {
-				if (nsect + (bh->b_size>>9) > ACSI_BUFFER_SECTORS) break;
-				nsect += bh->b_size >> 9;
-				++CurrentNReq;
-				if (bh == CURRENT->bhtail) break;
-			}
-			buffer = acsi_buffer;
-			pbuffer = phys_acsi_buffer;
-		}
-		else {
-			unsigned long pendadr, pnewadr;
-			pendadr = pbuffer + nsect*512;
-			while( (bh = bh->b_reqnext) ) {
-				pnewadr = virt_to_phys(bh->b_data);
-				if (!STRAM_ADDR(pnewadr) || pendadr != pnewadr) break;
-				nsect += bh->b_size >> 9;
-				pendadr = pnewadr + bh->b_size;
-				++CurrentNReq;
-				if (bh == CURRENT->bhtail) break;
-			}
-		}
-	}
-	else {
-		if (!STRAM_ADDR(pbuffer)) {
-			buffer = acsi_buffer;
-			pbuffer = phys_acsi_buffer;
-			if (nsect > ACSI_BUFFER_SECTORS)
-				nsect = ACSI_BUFFER_SECTORS;
-		}
-	}
-	CurrentBuffer = buffer;
-	CurrentNSect  = nsect;
-
-	if (rq_data_dir(CURRENT) == WRITE) {
-		CMDSET_TARG_LUN( write_cmd, target, lun );
-		CMDSET_BLOCK( write_cmd, block );
-		CMDSET_LEN( write_cmd, nsect );
-		if (buffer == acsi_buffer)
-			copy_to_acsibuffer();
-		dma_cache_maintenance( pbuffer, nsect*512, 1 );
-		do_acsi = write_intr;
-		if (!acsicmd_dma( write_cmd, buffer, nsect, 1, 1)) {
-			do_acsi = NULL;
-			printk( KERN_ERR "ACSI (write): Timeout in command block\n" );
-			bad_rw_intr();
-			goto repeat;
-		}
-		SET_TIMER();
-		return;
-	}
-	if (rq_data_dir(CURRENT) == READ) {
-		CMDSET_TARG_LUN( read_cmd, target, lun );
-		CMDSET_BLOCK( read_cmd, block );
-		CMDSET_LEN( read_cmd, nsect );
-		do_acsi = read_intr;
-		if (!acsicmd_dma( read_cmd, buffer, nsect, 0, 1)) {
-			do_acsi = NULL;
-			printk( KERN_ERR "ACSI (read): Timeout in command block\n" );
-			bad_rw_intr();
-			goto repeat;
-		}
-		SET_TIMER();
-		return;
-	}
-	panic("unknown ACSI command");
-}
-
-
-
-/***********************************************************************
- *
- *  Misc functions: ioctl, open, release, check_change, ...
- *
- ***********************************************************************/
-
-static int acsi_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
-	struct acsi_info_struct *aip = bdev->bd_disk->private_data;
-
-	/*
-	 * Just fake some geometry here, it's nonsense anyway
-	 * To make it easy, use Adaptec's usual 64/32 mapping
-	 */
-	geo->heads = 64;
-	geo->sectors = 32;
-	geo->cylinders = aip->size >> 11;
-	return 0;
-}
-
-static int acsi_ioctl( struct inode *inode, struct file *file,
-					   unsigned int cmd, unsigned long arg )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-	switch (cmd) {
-	  case SCSI_IOCTL_GET_IDLUN:
-		/* SCSI compatible GET_IDLUN call to get target's ID and LUN number */
-		put_user( aip->target | (aip->lun << 8),
-				  &((Scsi_Idlun *) arg)->dev_id );
-		put_user( 0, &((Scsi_Idlun *) arg)->host_unique_id );
-		return 0;
-	  default:
-		return -EINVAL;
-	}
-}
-
-
-/*
- * Open a device, check for read-only and lock the medium if it is
- * removable.
- *
- * Changes by Martin Rogge, 9th Aug 1995:
- * Check whether check_disk_change (and therefore revalidate_acsidisk)
- * was successful. They fail when there is no medium in the drive.
- *
- * The problem of media being changed during an operation can be 
- * ignored because of the prevent_removal code.
- *
- * Added check for the validity of the device number.
- *
- */
-
-static int acsi_open( struct inode * inode, struct file * filp )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-
-	if (aip->access_count == 0 && aip->removable) {
-#if 0
-		aip->changed = 1;	/* safety first */
-#endif
-		check_disk_change( inode->i_bdev );
-		if (aip->changed)	/* revalidate was not successful (no medium) */
-			return -ENXIO;
-		acsi_prevent_removal(aip, 1);
-	}
-	aip->access_count++;
-
-	if (filp && filp->f_mode) {
-		check_disk_change( inode->i_bdev );
-		if (filp->f_mode & 2) {
-			if (aip->read_only) {
-				acsi_release( inode, filp );
-				return -EROFS;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Releasing a block device means we sync() it, so that it can safely
- * be forgotten about...
- */
-
-static int acsi_release( struct inode * inode, struct file * file )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-	if (--aip->access_count == 0 && aip->removable)
-		acsi_prevent_removal(aip, 0);
-	return( 0 );
-}
-
-/*
- * Prevent or allow a media change for removable devices.
- */
-
-static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag)
-{
-	stdma_lock( NULL, NULL );
-	
-	CMDSET_TARG_LUN(pa_med_rem_cmd, aip->target, aip->lun);
-	CMDSET_LEN( pa_med_rem_cmd, flag );
-	
-	if (acsicmd_nodma(pa_med_rem_cmd, 0) && acsi_wait_for_IRQ(3*HZ))
-		acsi_getstatus();
-	/* Do not report errors -- some devices may not know this command. */
-
-	ENABLE_IRQ();
-	stdma_release();
-}
-
-static int acsi_media_change(struct gendisk *disk)
-{
-	struct acsi_info_struct *aip = disk->private_data;
-
-	if (!aip->removable) 
-		return 0;
-
-	if (aip->changed)
-		/* We can be sure that the medium has been changed -- REQUEST
-		 * SENSE has reported this earlier.
-		 */
-		return 1;
-
-	/* If the flag isn't set, make a test by reading block 0.
-	 * If errors happen, it seems to be better to say "changed"...
-	 */
-	stdma_lock( NULL, NULL );
-	CMDSET_TARG_LUN(read_cmd, aip->target, aip->lun);
-	CMDSET_BLOCK( read_cmd, 0 );
-	CMDSET_LEN( read_cmd, 1 );
-	if (acsicmd_dma(read_cmd, acsi_buffer, 1, 0, 0) &&
-	    acsi_wait_for_IRQ(3*HZ)) {
-		if (acsi_getstatus()) {
-			if (acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
-				if (CARTRCH_STAT(aip, acsi_buffer))
-					aip->changed = 1;
-			}
-			else {
-				printk( KERN_ERR "%s: REQUEST SENSE failed in test for "
-				       "medium change; assuming a change\n", disk->disk_name );
-				aip->changed = 1;
-			}
-		}
-	}
-	else {
-		printk( KERN_ERR "%s: Test for medium changed timed out; "
-				"assuming a change\n", disk->disk_name);
-		aip->changed = 1;
-	}
-	ENABLE_IRQ();
-	stdma_release();
-
-	/* Now, after reading a block, the changed status is surely valid. */
-	return aip->changed;
-}
-
-
-static int acsi_change_blk_size( int target, int lun)
-
-{	int i;
-
-	for (i=0; i<12; i++)
-		acsi_buffer[i] = 0;
-
-	acsi_buffer[3] = 8;
-	acsi_buffer[10] = 2;
-	CMDSET_TARG_LUN( modeselect_cmd, target, lun);
-
-	if (!acsicmd_dma( modeselect_cmd, acsi_buffer, 1,1,0) ||
-		!acsi_wait_for_IRQ( 3*HZ ) ||
-		acsi_getstatus() != 0 ) {
-		return(0);
-	}
-	return(1);
-}
-
-
-static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd )
-
-{
-	int page;
-
-	CMDSET_TARG_LUN( modesense_cmd, target, lun );
-	for (page=0; page<4; page++) {
-		modesense_cmd[2] = page;
-		if (!acsicmd_dma( modesense_cmd, acsi_buffer, 1, 0, 0 ) ||
-		    !acsi_wait_for_IRQ( 3*HZ ) ||
-		    acsi_getstatus())
-			continue;
-
-		/* read twice to jump over the second 16-byte border! */
-		udelay(300);
-		if (acsi_wait_for_noIRQ( 20 ) &&
-		    acsicmd_nodma( modesense_cmd, 0 ) &&
-		    acsi_wait_for_IRQ( 3*HZ ) &&
-		    acsi_getstatus() == 0)
-			break;
-	}
-	if (page == 4) {
-		return(0);
-	}
-
-	dma_cache_maintenance( phys_acsi_buffer, sizeof(SENSE_DATA), 0 );
-	*sd = *(SENSE_DATA *)acsi_buffer;
-
-	/* Validity check, depending on type of data */
-	
-	switch( SENSE_TYPE(*sd) ) {
-
-	  case SENSE_TYPE_ATARI:
-		if (CAPACITY(*sd) == 0)
-			goto invalid_sense;
-		break;
-
-	  case SENSE_TYPE_SCSI:
-		if (sd->scsi.descriptor_size != 8)
-			goto invalid_sense;
-		break;
-
-	  case SENSE_TYPE_UNKNOWN:
-
-		printk( KERN_ERR "ACSI target %d, lun %d: Cannot interpret "
-				"sense data\n", target, lun ); 
-		
-	  invalid_sense:
-
-#ifdef DEBUG
-		{	int i;
-		printk( "Mode sense data for ACSI target %d, lun %d seem not valid:",
-				target, lun );
-		for( i = 0; i < sizeof(SENSE_DATA); ++i )
-			printk( "%02x ", (unsigned char)acsi_buffer[i] );
-		printk( "\n" );
-		}
-#endif
-		return( 0 );
-	}
-		
-	return( 1 );
-}
-
-
-
-/*******************************************************************
- *
- *  Initialization
- *
- ********************************************************************/
-
-
-extern struct block_device_operations acsi_fops;
-
-static struct gendisk *acsi_gendisk[MAX_DEV];
-
-#define MAX_SCSI_DEVICE_CODE 10
-
-static const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] =
-{
- "Direct-Access    ",
- "Sequential-Access",
- "Printer          ",
- "Processor        ",
- "WORM             ",
- "CD-ROM           ",
- "Scanner          ",
- "Optical Device   ",
- "Medium Changer   ",
- "Communications   "
-};
-
-static void print_inquiry(unsigned char *data)
-{
-	int i;
-
-	printk(KERN_INFO "  Vendor: ");
-	for (i = 8; i < 16; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("  Model: ");
-	for (i = 16; i < 32; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("  Rev: ");
-	for (i = 32; i < 36; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("\n");
-
-	i = data[0] & 0x1f;
-
-	printk(KERN_INFO "  Type:   %s ", (i < MAX_SCSI_DEVICE_CODE
-									   ? scsi_device_types[i]
-									   : "Unknown          "));
-	printk("                 ANSI SCSI revision: %02x", data[2] & 0x07);
-	if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1)
-	  printk(" CCS\n");
-	else
-	  printk("\n");
-}
-
-
-/* 
- * Changes by Martin Rogge, 9th Aug 1995: 
- * acsi_devinit has been taken out of acsi_geninit, because it needs 
- * to be called from revalidate_acsidisk. The result of request sense 
- * is now checked for DRIVE NOT READY.
- *
- * The structure *aip is only valid when acsi_devinit returns 
- * DEV_SUPPORTED. 
- *
- */
-	
-#define DEV_NONE	0
-#define DEV_UNKNOWN	1
-#define DEV_SUPPORTED	2
-#define DEV_SLM		3
-
-static int acsi_devinit(struct acsi_info_struct *aip)
-{
-	int status, got_inquiry;
-	SENSE_DATA sense;
-	unsigned char reqsense, extsense;
-
-	/*****************************************************************/
-	/* Do a TEST UNIT READY command to test the presence of a device */
-	/*****************************************************************/
-
-	CMDSET_TARG_LUN(tur_cmd, aip->target, aip->lun);
-	if (!acsicmd_nodma(tur_cmd, 0)) {
-		/* timed out -> no device here */
-#ifdef DEBUG_DETECT
-		printk("target %d lun %d: timeout\n", aip->target, aip->lun);
-#endif
-		return DEV_NONE;
-	}
-		
-	/*************************/
-	/* Read the ACSI status. */
-	/*************************/
-
-	status = acsi_getstatus();
-	if (status) {
-		if (status == 0x12) {
-			/* The SLM printer should be the only device that
-			 * responds with the error code in the status byte. In
-			 * correct status bytes, bit 4 is never set.
-			 */
-			printk( KERN_INFO "Detected SLM printer at id %d lun %d\n",
-			       aip->target, aip->lun);
-			return DEV_SLM;
-		}
-		/* ignore CHECK CONDITION, since some devices send a
-		   UNIT ATTENTION */
-		if ((status & 0x1e) != 0x2) {
-#ifdef DEBUG_DETECT
-			printk("target %d lun %d: status %d\n",
-			       aip->target, aip->lun, status);
-#endif
-			return DEV_UNKNOWN;
-		}
-	}
-
-	/*******************************/
-	/* Do a REQUEST SENSE command. */
-	/*******************************/
-
-	if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
-		printk( KERN_WARNING "acsi_reqsense failed\n");
-		acsi_buffer[0] = 0;
-		acsi_buffer[2] = UNIT_ATTENTION;
-	}
-	reqsense = acsi_buffer[0];
-	extsense = acsi_buffer[2] & 0xf;
-	if (status) {
-		if ((reqsense & 0x70) == 0x70) {	/* extended sense */
-			if (extsense != UNIT_ATTENTION &&
-			    extsense != NOT_READY) {
-#ifdef DEBUG_DETECT
-				printk("target %d lun %d: extended sense %d\n",
-				       aip->target, aip->lun, extsense);
-#endif
-				return DEV_UNKNOWN;
-			}
-		}
-		else {
-			if (reqsense & 0x7f) {
-#ifdef DEBUG_DETECT
-				printk("target %d lun %d: sense %d\n",
-				       aip->target, aip->lun, reqsense);
-#endif
-				return DEV_UNKNOWN;
-			}
-		}
-	}
-	else 
-		if (reqsense == 0x4) {	/* SH204 Bug workaround */
-#ifdef DEBUG_DETECT
-			printk("target %d lun %d status=0 sense=4\n",
-			       aip->target, aip->lun);
-#endif
-			return DEV_UNKNOWN;
-		}
-
-	/***********************************************************/
-	/* Do an INQUIRY command to get more infos on this device. */
-	/***********************************************************/
-
-	/* Assume default values */
-	aip->removable = 1;
-	aip->read_only = 0;
-	aip->old_atari_disk = 0;
-	aip->changed = (extsense == NOT_READY);	/* medium inserted? */
-	aip->size = DEFAULT_SIZE;
-	got_inquiry = 0;
-	/* Fake inquiry result for old atari disks */
-	memcpy(acsi_buffer, "\000\000\001\000    Adaptec 40xx"
-	       "                    ", 40);
-	CMDSET_TARG_LUN(inquiry_cmd, aip->target, aip->lun);
-	if (acsicmd_dma(inquiry_cmd, acsi_buffer, 1, 0, 0) &&
-	    acsi_getstatus() == 0) {
-		acsicmd_nodma(inquiry_cmd, 0);
-		acsi_getstatus();
-		dma_cache_maintenance( phys_acsi_buffer, 256, 0 );
-		got_inquiry = 1;
-		aip->removable = !!(acsi_buffer[1] & 0x80);
-	}
-	if (aip->type == NONE)	/* only at boot time */
-		print_inquiry(acsi_buffer);
-	switch(acsi_buffer[0]) {
-	  case TYPE_DISK:
-		aip->type = HARDDISK;
-		break;
-	  case TYPE_ROM:
-		aip->type = CDROM;
-		aip->read_only = 1;
-		break;
-	  default:
-		return DEV_UNKNOWN;
-	}
-	/****************************/
-	/* Do a MODE SENSE command. */
-	/****************************/
-
-	if (!acsi_mode_sense(aip->target, aip->lun, &sense)) {
-		printk( KERN_WARNING "No mode sense data.\n" );
-		return DEV_UNKNOWN;
-	}
-	if ((SECTOR_SIZE(sense) != 512) &&
-	    ((aip->type != CDROM) ||
-	     !acsi_change_blk_size(aip->target, aip->lun) ||
-	     !acsi_mode_sense(aip->target, aip->lun, &sense) ||
-	     (SECTOR_SIZE(sense) != 512))) {
-		printk( KERN_WARNING "Sector size != 512 not supported.\n" );
-		return DEV_UNKNOWN;
-	}
-	/* There are disks out there that claim to have 0 sectors... */
-	if (CAPACITY(sense))
-		aip->size = CAPACITY(sense);	/* else keep DEFAULT_SIZE */
-	if (!got_inquiry && SENSE_TYPE(sense) == SENSE_TYPE_ATARI) {
-		/* If INQUIRY failed and the sense data suggest an old
-		 * Atari disk (SH20x, Megafile), the disk is not removable
-		 */
-		aip->removable = 0;
-		aip->old_atari_disk = 1;
-	}
-	
-	/******************/
-	/* We've done it. */
-	/******************/
-	
-	return DEV_SUPPORTED;
-}
-
-EXPORT_SYMBOL(acsi_delay_start);
-EXPORT_SYMBOL(acsi_delay_end);
-EXPORT_SYMBOL(acsi_wait_for_IRQ);
-EXPORT_SYMBOL(acsi_wait_for_noIRQ);
-EXPORT_SYMBOL(acsicmd_nodma);
-EXPORT_SYMBOL(acsi_getstatus);
-EXPORT_SYMBOL(acsi_buffer);
-EXPORT_SYMBOL(phys_acsi_buffer);
-
-#ifdef CONFIG_ATARI_SLM_MODULE
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-EXPORT_SYMBOL(acsi_extstatus);
-EXPORT_SYMBOL(acsi_end_extstatus);
-EXPORT_SYMBOL(acsi_extcmd);
-EXPORT_SYMBOL(acsi_attach_SLMs);
-
-/* to remember IDs of SLM devices, SLM module is loaded later
- * (index is target#, contents is lun#, -1 means "no SLM") */
-int SLM_devices[8];
-#endif
-
-static struct block_device_operations acsi_fops = {
-	.owner		= THIS_MODULE,
-	.open		= acsi_open,
-	.release	= acsi_release,
-	.ioctl		= acsi_ioctl,
-	.getgeo		= acsi_getgeo,
-	.media_changed	= acsi_media_change,
-	.revalidate_disk= acsi_revalidate,
-};
-
-#ifdef CONFIG_ATARI_SLM_MODULE
-/* call attach_slm() for each device that is a printer; needed for init of SLM
- * driver as a module, since it's not yet present if acsi.c is inited and thus
- * the bus gets scanned. */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) )
-{
-	int i, n = 0;
-
-	for( i = 0; i < 8; ++i )
-		if (SLM_devices[i] >= 0)
-			n += (*attach_func)( i, SLM_devices[i] );
-	printk( KERN_INFO "Found %d SLM printer(s) total.\n", n );
-}
-#endif /* CONFIG_ATARI_SLM_MODULE */
-
-
-int acsi_init( void )
-{
-	int err = 0;
-	int i, target, lun;
-	struct acsi_info_struct *aip;
-#ifdef CONFIG_ATARI_SLM
-	int n_slm = 0;
-#endif
-	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ACSI))
-		return 0;
-	if (register_blkdev(ACSI_MAJOR, "ad")) {
-		err = -EBUSY;
-		goto out1;
-	}
-	if (!(acsi_buffer =
-		  (char *)atari_stram_alloc(ACSI_BUFFER_SIZE, "acsi"))) {
-		err = -ENOMEM;
-		printk( KERN_ERR "Unable to get ACSI ST-Ram buffer.\n" );
-		goto out2;
-	}
-	phys_acsi_buffer = virt_to_phys( acsi_buffer );
-	STramMask = ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000;
-	
-	acsi_queue = blk_init_queue(do_acsi_request, &acsi_lock);
-	if (!acsi_queue) {
-		err = -ENOMEM;
-		goto out2a;
-	}
-#ifdef CONFIG_ATARI_SLM
-	err = slm_init();
-#endif
-	if (err)
-		goto out3;
-
-	printk( KERN_INFO "Probing ACSI devices:\n" );
-	NDevices = 0;
-#ifdef CONFIG_ATARI_SLM_MODULE
-	for( i = 0; i < 8; ++i )
-		SLM_devices[i] = -1;
-#endif
-	stdma_lock(NULL, NULL);
-
-	for (target = 0; target < 8 && NDevices < MAX_DEV; ++target) {
-		lun = 0;
-		do {
-			aip = &acsi_info[NDevices];
-			aip->type = NONE;
-			aip->target = target;
-			aip->lun = lun;
-			i = acsi_devinit(aip);
-			switch (i) {
-			  case DEV_SUPPORTED:
-				printk( KERN_INFO "Detected ");
-				switch (aip->type) {
-				  case HARDDISK:
-					printk("disk");
-					break;
-				  case CDROM:
-					printk("cdrom");
-					break;
-				  default:
-				}
-				printk(" ad%c at id %d lun %d ",
-				       'a' + NDevices, target, lun);
-				if (aip->removable) 
-					printk("(removable) ");
-				if (aip->read_only) 
-					printk("(read-only) ");
-				if (aip->size == DEFAULT_SIZE)
-					printk(" unkown size, using default ");
-				printk("%ld MByte\n",
-				       (aip->size*512+1024*1024/2)/(1024*1024));
-				NDevices++;
-				break;
-			  case DEV_SLM:
-#ifdef CONFIG_ATARI_SLM
-				n_slm += attach_slm( target, lun );
-				break;
-#endif
-#ifdef CONFIG_ATARI_SLM_MODULE
-				SLM_devices[target] = lun;
-				break;
-#endif
-				/* neither of the above: fall through to unknown device */
-			  case DEV_UNKNOWN:
-				printk( KERN_INFO "Detected unsupported device at "
-						"id %d lun %d\n", target, lun);
-				break;
-			}
-		}
-#ifdef CONFIG_ACSI_MULTI_LUN
-		while (i != DEV_NONE && ++lun < MAX_LUN);
-#else
-		while (0);
-#endif
-	}
-
-	/* reenable interrupt */
-	ENABLE_IRQ();
-	stdma_release();
-
-#ifndef CONFIG_ATARI_SLM
-	printk( KERN_INFO "Found %d ACSI device(s) total.\n", NDevices );
-#else
-	printk( KERN_INFO "Found %d ACSI device(s) and %d SLM printer(s) total.\n",
-			NDevices, n_slm );
-#endif
-	err = -ENOMEM;
-	for( i = 0; i < NDevices; ++i ) {
-		acsi_gendisk[i] = alloc_disk(16);
-		if (!acsi_gendisk[i])
-			goto out4;
-	}
-
-	for( i = 0; i < NDevices; ++i ) {
-		struct gendisk *disk = acsi_gendisk[i];
-		sprintf(disk->disk_name, "ad%c", 'a'+i);
-		aip = &acsi_info[NDevices];
-		disk->major = ACSI_MAJOR;
-		disk->first_minor = i << 4;
-		if (acsi_info[i].type != HARDDISK)
-			disk->minors = 1;
-		disk->fops = &acsi_fops;
-		disk->private_data = &acsi_info[i];
-		set_capacity(disk, acsi_info[i].size);
-		disk->queue = acsi_queue;
-		add_disk(disk);
-	}
-	return 0;
-out4:
-	while (i--)
-		put_disk(acsi_gendisk[i]);
-out3:
-	blk_cleanup_queue(acsi_queue);
-out2a:
-	atari_stram_free( acsi_buffer );
-out2:
-	unregister_blkdev( ACSI_MAJOR, "ad" );
-out1:
-	return err;
-}
-
-
-#ifdef MODULE
-
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	int err;
-
-	if ((err = acsi_init()))
-		return( err );
-	printk( KERN_INFO "ACSI driver loaded as module.\n");
-	return( 0 );
-}
-
-void cleanup_module(void)
-{
-	int i;
-	del_timer( &acsi_timer );
-	blk_cleanup_queue(acsi_queue);
-	atari_stram_free( acsi_buffer );
-
-	if (unregister_blkdev( ACSI_MAJOR, "ad" ) != 0)
-		printk( KERN_ERR "acsi: cleanup_module failed\n");
-
-	for (i = 0; i < NDevices; i++) {
-		del_gendisk(acsi_gendisk[i]);
-		put_disk(acsi_gendisk[i]);
-	}
-}
-#endif
-
-/*
- * This routine is called to flush all partitions and partition tables
- * for a changed scsi disk, and then re-read the new partition table.
- * If we are revalidating a disk because of a media change, then we
- * enter with usage == 0.  If we are using an ioctl, we automatically have
- * usage == 1 (we need an open channel to use an ioctl :-), so this
- * is our limit.
- *
- * Changes by Martin Rogge, 9th Aug 1995: 
- * got cd-roms to work by calling acsi_devinit. There are only two problems:
- * First, if there is no medium inserted, the status will remain "changed".
- * That is no problem at all, but our design of three-valued logic (medium
- * changed, medium not changed, no medium inserted).
- * Secondly the check could fail completely and the drive could deliver
- * nonsensical data, which could mess up the acsi_info[] structure. In
- * that case we try to make the entry safe.
- *
- */
-
-static int acsi_revalidate(struct gendisk *disk)
-{
-	struct acsi_info_struct *aip = disk->private_data;
-	stdma_lock( NULL, NULL );
-	if (acsi_devinit(aip) != DEV_SUPPORTED) {
-		printk( KERN_ERR "ACSI: revalidate failed for target %d lun %d\n",
-		       aip->target, aip->lun);
-		aip->size = 0;
-		aip->read_only = 1;
-		aip->removable = 1;
-		aip->changed = 1; /* next acsi_open will try again... */
-	}
-
-	ENABLE_IRQ();
-	stdma_release();
-	set_capacity(disk, aip->size);
-	return 0;
-}