block: remove the deprecated ub driver

It was scheduled to be removed in 3.6.

Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 2474 deletions

diff --git a/drivers/block/ub.c b/drivers/block/ub.c
deleted file mode 100644
index fcec022..0000000
--- a/drivers/block/ub.c
+++ /dev/null
@@ -1,2474 +0,0 @@
-/*
- * The low performance USB storage driver (ub).
- *
- * Copyright (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
- * Copyright (C) 2004 Pete Zaitcev (zaitcev@yahoo.com)
- *
- * This work is a part of Linux kernel, is derived from it,
- * and is not licensed separately. See file COPYING for details.
- *
- * TODO (sorted by decreasing priority)
- *  -- Return sense now that rq allows it (we always auto-sense anyway).
- *  -- set readonly flag for CDs, set removable flag for CF readers
- *  -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- *  -- verify the 13 conditions and do bulk resets
- *  -- highmem
- *  -- move top_sense and work_bcs into separate allocations (if they survive)
- *     for cache purists and esoteric architectures.
- *  -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ?
- *  -- prune comments, they are too volumnous
- *  -- Resove XXX's
- *  -- CLEAR, CLR2STS, CLRRS seem to be ripe for refactoring.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb_usual.h>
-#include <linux/blkdev.h>
-#include <linux/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <scsi/scsi.h>
-
-#define DRV_NAME "ub"
-
-#define UB_MAJOR 180
-
-/*
- * The command state machine is the key model for understanding of this driver.
- *
- * The general rule is that all transitions are done towards the bottom
- * of the diagram, thus preventing any loops.
- *
- * An exception to that is how the STAT state is handled. A counter allows it
- * to be re-entered along the path marked with [C].
- *
- *       +--------+
- *       ! INIT   !
- *       +--------+
- *           !
- *        ub_scsi_cmd_start fails ->--------------------------------------\
- *           !                                                            !
- *           V                                                            !
- *       +--------+                                                       !
- *       ! CMD    !                                                       !
- *       +--------+                                                       !
- *           !                                            +--------+      !
- *         was -EPIPE -->-------------------------------->! CLEAR  !      !
- *           !                                            +--------+      !
- *           !                                                !           !
- *         was error -->------------------------------------- ! --------->\
- *           !                                                !           !
- *  /--<-- cmd->dir == NONE ?                                 !           !
- *  !        !                                                !           !
- *  !        V                                                !           !
- *  !    +--------+                                           !           !
- *  !    ! DATA   !                                           !           !
- *  !    +--------+                                           !           !
- *  !        !                           +---------+          !           !
- *  !      was -EPIPE -->--------------->! CLR2STS !          !           !
- *  !        !                           +---------+          !           !
- *  !        !                                !               !           !
- *  !        !                              was error -->---- ! --------->\
- *  !      was error -->--------------------- ! ------------- ! --------->\
- *  !        !                                !               !           !
- *  !        V                                !               !           !
- *  \--->+--------+                           !               !           !
- *       ! STAT   !<--------------------------/               !           !
- *  /--->+--------+                                           !           !
- *  !        !                                                !           !
- * [C]     was -EPIPE -->-----------\                         !           !
- *  !        !                      !                         !           !
- *  +<---- len == 0                 !                         !           !
- *  !        !                      !                         !           !
- *  !      was error -->--------------------------------------!---------->\
- *  !        !                      !                         !           !
- *  +<---- bad CSW                  !                         !           !
- *  +<---- bad tag                  !                         !           !
- *  !        !                      V                         !           !
- *  !        !                 +--------+                     !           !
- *  !        !                 ! CLRRS  !                     !           !
- *  !        !                 +--------+                     !           !
- *  !        !                      !                         !           !
- *  \------- ! --------------------[C]--------\               !           !
- *           !                                !               !           !
- *         cmd->error---\                +--------+           !           !
- *           !          +--------------->! SENSE  !<----------/           !
- *         STAT_FAIL----/                +--------+                       !
- *           !                                !                           V
- *           !                                V                      +--------+
- *           \--------------------------------\--------------------->! DONE   !
- *                                                                   +--------+
- */
-
-/*
- * This many LUNs per USB device.
- * Every one of them takes a host, see UB_MAX_HOSTS.
- */
-#define UB_MAX_LUNS   9
-
-/*
- */
-
-#define UB_PARTS_PER_LUN      8
-
-#define UB_MAX_CDB_SIZE      16		/* Corresponds to Bulk */
-
-#define UB_SENSE_SIZE  18
-
-/*
- */
-struct ub_dev;
-
-#define UB_MAX_REQ_SG	9	/* cdrecord requires 32KB and maybe a header */
-#define UB_MAX_SECTORS 64
-
-/*
- * A second is more than enough for a 32K transfer (UB_MAX_SECTORS)
- * even if a webcam hogs the bus, but some devices need time to spin up.
- */
-#define UB_URB_TIMEOUT	(HZ*2)
-#define UB_DATA_TIMEOUT	(HZ*5)	/* ZIP does spin-ups in the data phase */
-#define UB_STAT_TIMEOUT	(HZ*5)	/* Same spinups and eject for a dataless cmd. */
-#define UB_CTRL_TIMEOUT	(HZ/2)	/* 500ms ought to be enough to clear a stall */
-
-/*
- * An instance of a SCSI command in transit.
- */
-#define UB_DIR_NONE	0
-#define UB_DIR_READ	1
-#define UB_DIR_ILLEGAL2	2
-#define UB_DIR_WRITE	3
-
-#define UB_DIR_CHAR(c)  (((c)==UB_DIR_WRITE)? 'w': \
-			 (((c)==UB_DIR_READ)? 'r': 'n'))
-
-enum ub_scsi_cmd_state {
-	UB_CMDST_INIT,			/* Initial state */
-	UB_CMDST_CMD,			/* Command submitted */
-	UB_CMDST_DATA,			/* Data phase */
-	UB_CMDST_CLR2STS,		/* Clearing before requesting status */
-	UB_CMDST_STAT,			/* Status phase */
-	UB_CMDST_CLEAR,			/* Clearing a stall (halt, actually) */
-	UB_CMDST_CLRRS,			/* Clearing before retrying status */
-	UB_CMDST_SENSE,			/* Sending Request Sense */
-	UB_CMDST_DONE			/* Final state */
-};
-
-struct ub_scsi_cmd {
-	unsigned char cdb[UB_MAX_CDB_SIZE];
-	unsigned char cdb_len;
-
-	unsigned char dir;		/* 0 - none, 1 - read, 3 - write. */
-	enum ub_scsi_cmd_state state;
-	unsigned int tag;
-	struct ub_scsi_cmd *next;
-
-	int error;			/* Return code - valid upon done */
-	unsigned int act_len;		/* Return size */
-	unsigned char key, asc, ascq;	/* May be valid if error==-EIO */
-
-	int stat_count;			/* Retries getting status. */
-	unsigned int timeo;		/* jiffies until rq->timeout changes */
-
-	unsigned int len;		/* Requested length */
-	unsigned int current_sg;
-	unsigned int nsg;		/* sgv[nsg] */
-	struct scatterlist sgv[UB_MAX_REQ_SG];
-
-	struct ub_lun *lun;
-	void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
-	void *back;
-};
-
-struct ub_request {
-	struct request *rq;
-	unsigned int current_try;
-	unsigned int nsg;		/* sgv[nsg] */
-	struct scatterlist sgv[UB_MAX_REQ_SG];
-};
-
-/*
- */
-struct ub_capacity {
-	unsigned long nsec;		/* Linux size - 512 byte sectors */
-	unsigned int bsize;		/* Linux hardsect_size */
-	unsigned int bshift;		/* Shift between 512 and hard sects */
-};
-
-/*
- * This is a direct take-off from linux/include/completion.h
- * The difference is that I do not wait on this thing, just poll.
- * When I want to wait (ub_probe), I just use the stock completion.
- *
- * Note that INIT_COMPLETION takes no lock. It is correct. But why
- * in the bloody hell that thing takes struct instead of pointer to struct
- * is quite beyond me. I just copied it from the stock completion.
- */
-struct ub_completion {
-	unsigned int done;
-	spinlock_t lock;
-};
-
-static DEFINE_MUTEX(ub_mutex);
-static inline void ub_init_completion(struct ub_completion *x)
-{
-	x->done = 0;
-	spin_lock_init(&x->lock);
-}
-
-#define UB_INIT_COMPLETION(x)	((x).done = 0)
-
-static void ub_complete(struct ub_completion *x)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&x->lock, flags);
-	x->done++;
-	spin_unlock_irqrestore(&x->lock, flags);
-}
-
-static int ub_is_completed(struct ub_completion *x)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&x->lock, flags);
-	ret = x->done;
-	spin_unlock_irqrestore(&x->lock, flags);
-	return ret;
-}
-
-/*
- */
-struct ub_scsi_cmd_queue {
-	int qlen, qmax;
-	struct ub_scsi_cmd *head, *tail;
-};
-
-/*
- * The block device instance (one per LUN).
- */
-struct ub_lun {
-	struct ub_dev *udev;
-	struct list_head link;
-	struct gendisk *disk;
-	int id;				/* Host index */
-	int num;			/* LUN number */
-	char name[16];
-
-	int changed;			/* Media was changed */
-	int removable;
-	int readonly;
-
-	struct ub_request urq;
-
-	/* Use Ingo's mempool if or when we have more than one command. */
-	/*
-	 * Currently we never need more than one command for the whole device.
-	 * However, giving every LUN a command is a cheap and automatic way
-	 * to enforce fairness between them.
-	 */
-	int cmda[1];
-	struct ub_scsi_cmd cmdv[1];
-
-	struct ub_capacity capacity; 
-};
-
-/*
- * The USB device instance.
- */
-struct ub_dev {
-	spinlock_t *lock;
-	atomic_t poison;		/* The USB device is disconnected */
-	int openc;			/* protected by ub_lock! */
-					/* kref is too implicit for our taste */
-	int reset;			/* Reset is running */
-	int bad_resid;
-	unsigned int tagcnt;
-	char name[12];
-	struct usb_device *dev;
-	struct usb_interface *intf;
-
-	struct list_head luns;
-
-	unsigned int send_bulk_pipe;	/* cached pipe values */
-	unsigned int recv_bulk_pipe;
-	unsigned int send_ctrl_pipe;
-	unsigned int recv_ctrl_pipe;
-
-	struct tasklet_struct tasklet;
-
-	struct ub_scsi_cmd_queue cmd_queue;
-	struct ub_scsi_cmd top_rqs_cmd;	/* REQUEST SENSE */
-	unsigned char top_sense[UB_SENSE_SIZE];
-
-	struct ub_completion work_done;
-	struct urb work_urb;
-	struct timer_list work_timer;
-	int last_pipe;			/* What might need clearing */
-	__le32 signature;		/* Learned signature */
-	struct bulk_cb_wrap work_bcb;
-	struct bulk_cs_wrap work_bcs;
-	struct usb_ctrlrequest work_cr;
-
-	struct work_struct reset_work;
-	wait_queue_head_t reset_wait;
-};
-
-/*
- */
-static void ub_cleanup(struct ub_dev *sc);
-static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
-static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_scsi_cmd *cmd, struct ub_request *urq);
-static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_scsi_cmd *cmd, struct ub_request *urq);
-static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
-static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_request *urq, struct ub_scsi_cmd *cmd);
-static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_urb_complete(struct urb *urb);
-static void ub_scsi_action(unsigned long _dev);
-static void ub_scsi_dispatch(struct ub_dev *sc);
-static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc);
-static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    int stalled_pipe);
-static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static void ub_reset_enter(struct ub_dev *sc, int try);
-static void ub_reset_task(struct work_struct *work);
-static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_capacity *ret);
-static int ub_sync_reset(struct ub_dev *sc);
-static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
-static int ub_probe_lun(struct ub_dev *sc, int lnum);
-
-/*
- */
-#ifdef CONFIG_USB_LIBUSUAL
-
-#define ub_usb_ids  usb_storage_usb_ids
-#else
-
-static const struct usb_device_id ub_usb_ids[] = {
-	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, ub_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/*
- * Find me a way to identify "next free minor" for add_disk(),
- * and the array disappears the next day. However, the number of
- * hosts has something to do with the naming and /proc/partitions.
- * This has to be thought out in detail before changing.
- * If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure.
- */
-#define UB_MAX_HOSTS  26
-static char ub_hostv[UB_MAX_HOSTS];
-
-#define UB_QLOCK_NUM 5
-static spinlock_t ub_qlockv[UB_QLOCK_NUM];
-static int ub_qlock_next = 0;
-
-static DEFINE_SPINLOCK(ub_lock);	/* Locks globals and ->openc */
-
-/*
- * The id allocator.
- *
- * This also stores the host for indexing by minor, which is somewhat dirty.
- */
-static int ub_id_get(void)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&ub_lock, flags);
-	for (i = 0; i < UB_MAX_HOSTS; i++) {
-		if (ub_hostv[i] == 0) {
-			ub_hostv[i] = 1;
-			spin_unlock_irqrestore(&ub_lock, flags);
-			return i;
-		}
-	}
-	spin_unlock_irqrestore(&ub_lock, flags);
-	return -1;
-}
-
-static void ub_id_put(int id)
-{
-	unsigned long flags;
-
-	if (id < 0 || id >= UB_MAX_HOSTS) {
-		printk(KERN_ERR DRV_NAME ": bad host ID %d\n", id);
-		return;
-	}
-
-	spin_lock_irqsave(&ub_lock, flags);
-	if (ub_hostv[id] == 0) {
-		spin_unlock_irqrestore(&ub_lock, flags);
-		printk(KERN_ERR DRV_NAME ": freeing free host ID %d\n", id);
-		return;
-	}
-	ub_hostv[id] = 0;
-	spin_unlock_irqrestore(&ub_lock, flags);
-}
-
-/*
- * This is necessitated by the fact that blk_cleanup_queue does not
- * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
- * Since our blk_init_queue() passes a spinlock common with ub_dev,
- * we have life time issues when ub_cleanup frees ub_dev.
- */
-static spinlock_t *ub_next_lock(void)
-{
-	unsigned long flags;
-	spinlock_t *ret;
-
-	spin_lock_irqsave(&ub_lock, flags);
-	ret = &ub_qlockv[ub_qlock_next];
-	ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
-	spin_unlock_irqrestore(&ub_lock, flags);
-	return ret;
-}
-
-/*
- * Downcount for deallocation. This rides on two assumptions:
- *  - once something is poisoned, its refcount cannot grow
- *  - opens cannot happen at this time (del_gendisk was done)
- * If the above is true, we can drop the lock, which we need for
- * blk_cleanup_queue(): the silly thing may attempt to sleep.
- * [Actually, it never needs to sleep for us, but it calls might_sleep()]
- */
-static void ub_put(struct ub_dev *sc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ub_lock, flags);
-	--sc->openc;
-	if (sc->openc == 0 && atomic_read(&sc->poison)) {
-		spin_unlock_irqrestore(&ub_lock, flags);
-		ub_cleanup(sc);
-	} else {
-		spin_unlock_irqrestore(&ub_lock, flags);
-	}
-}
-
-/*
- * Final cleanup and deallocation.
- */
-static void ub_cleanup(struct ub_dev *sc)
-{
-	struct list_head *p;
-	struct ub_lun *lun;
-	struct request_queue *q;
-
-	while (!list_empty(&sc->luns)) {
-		p = sc->luns.next;
-		lun = list_entry(p, struct ub_lun, link);
-		list_del(p);
-
-		/* I don't think queue can be NULL. But... Stolen from sx8.c */
-		if ((q = lun->disk->queue) != NULL)
-			blk_cleanup_queue(q);
-		/*
-		 * If we zero disk->private_data BEFORE put_disk, we have
-		 * to check for NULL all over the place in open, release,
-		 * check_media and revalidate, because the block level
-		 * semaphore is well inside the put_disk.
-		 * But we cannot zero after the call, because *disk is gone.
-		 * The sd.c is blatantly racy in this area.
-		 */
-		/* disk->private_data = NULL; */
-		put_disk(lun->disk);
-		lun->disk = NULL;
-
-		ub_id_put(lun->id);
-		kfree(lun);
-	}
-
-	usb_set_intfdata(sc->intf, NULL);
-	usb_put_intf(sc->intf);
-	usb_put_dev(sc->dev);
-	kfree(sc);
-}
-
-/*
- * The "command allocator".
- */
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
-{
-	struct ub_scsi_cmd *ret;
-
-	if (lun->cmda[0])
-		return NULL;
-	ret = &lun->cmdv[0];
-	lun->cmda[0] = 1;
-	return ret;
-}
-
-static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
-{
-	if (cmd != &lun->cmdv[0]) {
-		printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
-		    lun->name, cmd);
-		return;
-	}
-	if (!lun->cmda[0]) {
-		printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
-		return;
-	}
-	lun->cmda[0] = 0;
-}
-
-/*
- * The command queue.
- */
-static void ub_cmdq_add(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
-
-	if (t->qlen++ == 0) {
-		t->head = cmd;
-		t->tail = cmd;
-	} else {
-		t->tail->next = cmd;
-		t->tail = cmd;
-	}
-
-	if (t->qlen > t->qmax)
-		t->qmax = t->qlen;
-}
-
-static void ub_cmdq_insert(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
-
-	if (t->qlen++ == 0) {
-		t->head = cmd;
-		t->tail = cmd;
-	} else {
-		cmd->next = t->head;
-		t->head = cmd;
-	}
-
-	if (t->qlen > t->qmax)
-		t->qmax = t->qlen;
-}
-
-static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
-{
-	struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
-	struct ub_scsi_cmd *cmd;
-
-	if (t->qlen == 0)
-		return NULL;
-	if (--t->qlen == 0)
-		t->tail = NULL;
-	cmd = t->head;
-	t->head = cmd->next;
-	cmd->next = NULL;
-	return cmd;
-}
-
-#define ub_cmdq_peek(sc)  ((sc)->cmd_queue.head)
-
-/*
- * The request function is our main entry point
- */
-
-static void ub_request_fn(struct request_queue *q)
-{
-	struct ub_lun *lun = q->queuedata;
-	struct request *rq;
-
-	while ((rq = blk_peek_request(q)) != NULL) {
-		if (ub_request_fn_1(lun, rq) != 0) {
-			blk_stop_queue(q);
-			break;
-		}
-	}
-}
-
-static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
-{
-	struct ub_dev *sc = lun->udev;
-	struct ub_scsi_cmd *cmd;
-	struct ub_request *urq;
-	int n_elem;
-
-	if (atomic_read(&sc->poison)) {
-		blk_start_request(rq);
-		ub_end_rq(rq, DID_NO_CONNECT << 16);
-		return 0;
-	}
-
-	if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) {
-		blk_start_request(rq);
-		ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
-		return 0;
-	}
-
-	if (lun->urq.rq != NULL)
-		return -1;
-	if ((cmd = ub_get_cmd(lun)) == NULL)
-		return -1;
-	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
-
-	blk_start_request(rq);
-
-	urq = &lun->urq;
-	memset(urq, 0, sizeof(struct ub_request));
-	urq->rq = rq;
-
-	/*
-	 * get scatterlist from block layer
-	 */
-	sg_init_table(&urq->sgv[0], UB_MAX_REQ_SG);
-	n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]);
-	if (n_elem < 0) {
-		/* Impossible, because blk_rq_map_sg should not hit ENOMEM. */
-		printk(KERN_INFO "%s: failed request map (%d)\n",
-		    lun->name, n_elem);
-		goto drop;
-	}
-	if (n_elem > UB_MAX_REQ_SG) {	/* Paranoia */
-		printk(KERN_WARNING "%s: request with %d segments\n",
-		    lun->name, n_elem);
-		goto drop;
-	}
-	urq->nsg = n_elem;
-
-	if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
-		ub_cmd_build_packet(sc, lun, cmd, urq);
-	} else {
-		ub_cmd_build_block(sc, lun, cmd, urq);
-	}
-	cmd->state = UB_CMDST_INIT;
-	cmd->lun = lun;
-	cmd->done = ub_rw_cmd_done;
-	cmd->back = urq;
-
-	cmd->tag = sc->tagcnt++;
-	if (ub_submit_scsi(sc, cmd) != 0)
-		goto drop;
-
-	return 0;
-
-drop:
-	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, DID_ERROR << 16);
-	return 0;
-}
-
-static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_scsi_cmd *cmd, struct ub_request *urq)
-{
-	struct request *rq = urq->rq;
-	unsigned int block, nblks;
-
-	if (rq_data_dir(rq) == WRITE)
-		cmd->dir = UB_DIR_WRITE;
-	else
-		cmd->dir = UB_DIR_READ;
-
-	cmd->nsg = urq->nsg;
-	memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
-
-	/*
-	 * build the command
-	 *
-	 * The call to blk_queue_logical_block_size() guarantees that request
-	 * is aligned, but it is given in terms of 512 byte units, always.
-	 */
-	block = blk_rq_pos(rq) >> lun->capacity.bshift;
-	nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
-
-	cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
-	/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
-	cmd->cdb[2] = block >> 24;
-	cmd->cdb[3] = block >> 16;
-	cmd->cdb[4] = block >> 8;
-	cmd->cdb[5] = block;
-	cmd->cdb[7] = nblks >> 8;
-	cmd->cdb[8] = nblks;
-	cmd->cdb_len = 10;
-
-	cmd->len = blk_rq_bytes(rq);
-}
-
-static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_scsi_cmd *cmd, struct ub_request *urq)
-{
-	struct request *rq = urq->rq;
-
-	if (blk_rq_bytes(rq) == 0) {
-		cmd->dir = UB_DIR_NONE;
-	} else {
-		if (rq_data_dir(rq) == WRITE)
-			cmd->dir = UB_DIR_WRITE;
-		else
-			cmd->dir = UB_DIR_READ;
-	}
-
-	cmd->nsg = urq->nsg;
-	memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
-
-	memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
-	cmd->cdb_len = rq->cmd_len;
-
-	cmd->len = blk_rq_bytes(rq);
-
-	/*
-	 * To reapply this to every URB is not as incorrect as it looks.
-	 * In return, we avoid any complicated tracking calculations.
-	 */
-	cmd->timeo = rq->timeout;
-}
-
-static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct ub_lun *lun = cmd->lun;
-	struct ub_request *urq = cmd->back;
-	struct request *rq;
-	unsigned int scsi_status;
-
-	rq = urq->rq;
-
-	if (cmd->error == 0) {
-		if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
-			if (cmd->act_len >= rq->resid_len)
-				rq->resid_len = 0;
-			else
-				rq->resid_len -= cmd->act_len;
-			scsi_status = 0;
-		} else {
-			if (cmd->act_len != cmd->len) {
-				scsi_status = SAM_STAT_CHECK_CONDITION;
-			} else {
-				scsi_status = 0;
-			}
-		}
-	} else {
-		if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
-			/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
-			memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
-			rq->sense_len = UB_SENSE_SIZE;
-			if (sc->top_sense[0] != 0)
-				scsi_status = SAM_STAT_CHECK_CONDITION;
-			else
-				scsi_status = DID_ERROR << 16;
-		} else {
-			if (cmd->error == -EIO &&
-			    (cmd->key == 0 ||
-			     cmd->key == MEDIUM_ERROR ||
-			     cmd->key == UNIT_ATTENTION)) {
-				if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
-					return;
-			}
-			scsi_status = SAM_STAT_CHECK_CONDITION;
-		}
-	}
-
-	urq->rq = NULL;
-
-	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, scsi_status);
-	blk_start_queue(lun->disk->queue);
-}
-
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
-{
-	int error;
-
-	if (scsi_status == 0) {
-		error = 0;
-	} else {
-		error = -EIO;
-		rq->errors = scsi_status;
-	}
-	__blk_end_request_all(rq, error);
-}
-
-static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_request *urq, struct ub_scsi_cmd *cmd)
-{
-
-	if (atomic_read(&sc->poison))
-		return -ENXIO;
-
-	ub_reset_enter(sc, urq->current_try);
-
-	if (urq->current_try >= 3)
-		return -EIO;
-	urq->current_try++;
-
-	/* Remove this if anyone complains of flooding. */
-	printk(KERN_DEBUG "%s: dir %c len/act %d/%d "
-	    "[sense %x %02x %02x] retry %d\n",
-	    sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len,
-	    cmd->key, cmd->asc, cmd->ascq, urq->current_try);
-
-	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
-	ub_cmd_build_block(sc, lun, cmd, urq);
-
-	cmd->state = UB_CMDST_INIT;
-	cmd->lun = lun;
-	cmd->done = ub_rw_cmd_done;
-	cmd->back = urq;
-
-	cmd->tag = sc->tagcnt++;
-
-#if 0 /* Wasteful */
-	return ub_submit_scsi(sc, cmd);
-#else
-	ub_cmdq_add(sc, cmd);
-	return 0;
-#endif
-}
-
-/*
- * Submit a regular SCSI operation (not an auto-sense).
- *
- * The Iron Law of Good Submit Routine is:
- * Zero return - callback is done, Nonzero return - callback is not done.
- * No exceptions.
- *
- * Host is assumed locked.
- */
-static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
-	if (cmd->state != UB_CMDST_INIT ||
-	    (cmd->dir != UB_DIR_NONE && cmd->len == 0)) {
-		return -EINVAL;
-	}
-
-	ub_cmdq_add(sc, cmd);
-	/*
-	 * We can call ub_scsi_dispatch(sc) right away here, but it's a little
-	 * safer to jump to a tasklet, in case upper layers do something silly.
-	 */
-	tasklet_schedule(&sc->tasklet);
-	return 0;
-}
-
-/*
- * Submit the first URB for the queued command.
- * This function does not deal with queueing in any way.
- */
-static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct bulk_cb_wrap *bcb;
-	int rc;
-
-	bcb = &sc->work_bcb;
-
-	/*
-	 * ``If the allocation length is eighteen or greater, and a device
-	 * server returns less than eithteen bytes of data, the application
-	 * client should assume that the bytes not transferred would have been
-	 * zeroes had the device server returned those bytes.''
-	 *
-	 * We zero sense for all commands so that when a packet request
-	 * fails it does not return a stale sense.
-	 */
-	memset(&sc->top_sense, 0, UB_SENSE_SIZE);
-
-	/* set up the command wrapper */
-	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
-	bcb->Tag = cmd->tag;		/* Endianness is not important */
-	bcb->DataTransferLength = cpu_to_le32(cmd->len);
-	bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
-	bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
-	bcb->Length = cmd->cdb_len;
-
-	/* copy the command payload */
-	memcpy(bcb->CDB, cmd->cdb, UB_MAX_CDB_SIZE);
-
-	UB_INIT_COMPLETION(sc->work_done);
-
-	sc->last_pipe = sc->send_bulk_pipe;
-	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
-	    bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
-		/* XXX Clear stalls */
-		ub_complete(&sc->work_done);
-		return rc;
-	}
-
-	sc->work_timer.expires = jiffies + UB_URB_TIMEOUT;
-	add_timer(&sc->work_timer);
-
-	cmd->state = UB_CMDST_CMD;
-	return 0;
-}
-
-/*
- * Timeout handler.
- */
-static void ub_urb_timeout(unsigned long arg)
-{
-	struct ub_dev *sc = (struct ub_dev *) arg;
-	unsigned long flags;
-
-	spin_lock_irqsave(sc->lock, flags);
-	if (!ub_is_completed(&sc->work_done))
-		usb_unlink_urb(&sc->work_urb);
-	spin_unlock_irqrestore(sc->lock, flags);
-}
-
-/*
- * Completion routine for the work URB.
- *
- * This can be called directly from usb_submit_urb (while we have
- * the sc->lock taken) and from an interrupt (while we do NOT have
- * the sc->lock taken). Therefore, bounce this off to a tasklet.
- */
-static void ub_urb_complete(struct urb *urb)
-{
-	struct ub_dev *sc = urb->context;
-
-	ub_complete(&sc->work_done);
-	tasklet_schedule(&sc->tasklet);
-}
-
-static void ub_scsi_action(unsigned long _dev)
-{
-	struct ub_dev *sc = (struct ub_dev *) _dev;
-	unsigned long flags;
-
-	spin_lock_irqsave(sc->lock, flags);
-	ub_scsi_dispatch(sc);
-	spin_unlock_irqrestore(sc->lock, flags);
-}
-
-static void ub_scsi_dispatch(struct ub_dev *sc)
-{
-	struct ub_scsi_cmd *cmd;
-	int rc;
-
-	while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) {
-		if (cmd->state == UB_CMDST_DONE) {
-			ub_cmdq_pop(sc);
-			(*cmd->done)(sc, cmd);
-		} else if (cmd->state == UB_CMDST_INIT) {
-			if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
-				break;
-			cmd->error = rc;
-			cmd->state = UB_CMDST_DONE;
-		} else {
-			if (!ub_is_completed(&sc->work_done))
-				break;
-			del_timer(&sc->work_timer);
-			ub_scsi_urb_compl(sc, cmd);
-		}
-	}
-}
-
-static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct urb *urb = &sc->work_urb;
-	struct bulk_cs_wrap *bcs;
-	int endp;
-	int len;
-	int rc;
-
-	if (atomic_read(&sc->poison)) {
-		ub_state_done(sc, cmd, -ENODEV);
-		return;
-	}
-
-	endp = usb_pipeendpoint(sc->last_pipe);
-	if (usb_pipein(sc->last_pipe))
-		endp |= USB_DIR_IN;
-
-	if (cmd->state == UB_CMDST_CLEAR) {
-		if (urb->status == -EPIPE) {
-			/*
-			 * STALL while clearning STALL.
-			 * The control pipe clears itself - nothing to do.
-			 */
-			printk(KERN_NOTICE "%s: stall on control pipe\n",
-			    sc->name);
-			goto Bad_End;
-		}
-
-		/*
-		 * We ignore the result for the halt clear.
-		 */
-
-		usb_reset_endpoint(sc->dev, endp);
-
-		ub_state_sense(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_CLR2STS) {
-		if (urb->status == -EPIPE) {
-			printk(KERN_NOTICE "%s: stall on control pipe\n",
-			    sc->name);
-			goto Bad_End;
-		}
-
-		/*
-		 * We ignore the result for the halt clear.
-		 */
-
-		usb_reset_endpoint(sc->dev, endp);
-
-		ub_state_stat(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_CLRRS) {
-		if (urb->status == -EPIPE) {
-			printk(KERN_NOTICE "%s: stall on control pipe\n",
-			    sc->name);
-			goto Bad_End;
-		}
-
-		/*
-		 * We ignore the result for the halt clear.
-		 */
-
-		usb_reset_endpoint(sc->dev, endp);
-
-		ub_state_stat_counted(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_CMD) {
-		switch (urb->status) {
-		case 0:
-			break;
-		case -EOVERFLOW:
-			goto Bad_End;
-		case -EPIPE:
-			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
-			if (rc != 0) {
-				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear (%d)\n",
-				    sc->name, rc);
-				/*
-				 * This is typically ENOMEM or some other such shit.
-				 * Retrying is pointless. Just do Bad End on it...
-				 */
-				ub_state_done(sc, cmd, rc);
-				return;
-			}
-			cmd->state = UB_CMDST_CLEAR;
-			return;
-		case -ESHUTDOWN:	/* unplug */
-		case -EILSEQ:		/* unplug timeout on uhci */
-			ub_state_done(sc, cmd, -ENODEV);
-			return;
-		default:
-			goto Bad_End;
-		}
-		if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
-			goto Bad_End;
-		}
-
-		if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) {
-			ub_state_stat(sc, cmd);
-			return;
-		}
-
-		// udelay(125);		// usb-storage has this
-		ub_data_start(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_DATA) {
-		if (urb->status == -EPIPE) {
-			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
-			if (rc != 0) {
-				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear (%d)\n",
-				    sc->name, rc);
-				ub_state_done(sc, cmd, rc);
-				return;
-			}
-			cmd->state = UB_CMDST_CLR2STS;
-			return;
-		}
-		if (urb->status == -EOVERFLOW) {
-			/*
-			 * A babble? Failure, but we must transfer CSW now.
-			 */
-			cmd->error = -EOVERFLOW;	/* A cheap trick... */
-			ub_state_stat(sc, cmd);
-			return;
-		}
-
-		if (cmd->dir == UB_DIR_WRITE) {
-			/*
-			 * Do not continue writes in case of a failure.
-			 * Doing so would cause sectors to be mixed up,
-			 * which is worse than sectors lost.
-			 *
-			 * We must try to read the CSW, or many devices
-			 * get confused.
-			 */
-			len = urb->actual_length;
-			if (urb->status != 0 ||
-			    len != cmd->sgv[cmd->current_sg].length) {
-				cmd->act_len += len;
-
-				cmd->error = -EIO;
-				ub_state_stat(sc, cmd);
-				return;
-			}
-
-		} else {
-			/*
-			 * If an error occurs on read, we record it, and
-			 * continue to fetch data in order to avoid bubble.
-			 *
-			 * As a small shortcut, we stop if we detect that
-			 * a CSW mixed into data.
-			 */
-			if (urb->status != 0)
-				cmd->error = -EIO;
-
-			len = urb->actual_length;
-			if (urb->status != 0 ||
-			    len != cmd->sgv[cmd->current_sg].length) {
-				if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN)
-					goto Bad_End;
-			}
-		}
-
-		cmd->act_len += urb->actual_length;
-
-		if (++cmd->current_sg < cmd->nsg) {
-			ub_data_start(sc, cmd);
-			return;
-		}
-		ub_state_stat(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_STAT) {
-		if (urb->status == -EPIPE) {
-			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
-			if (rc != 0) {
-				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear (%d)\n",
-				    sc->name, rc);
-				ub_state_done(sc, cmd, rc);
-				return;
-			}
-
-			/*
-			 * Having a stall when getting CSW is an error, so
-			 * make sure uppper levels are not oblivious to it.
-			 */
-			cmd->error = -EIO;		/* A cheap trick... */
-
-			cmd->state = UB_CMDST_CLRRS;
-			return;
-		}
-
-		/* Catch everything, including -EOVERFLOW and other nasties. */
-		if (urb->status != 0)
-			goto Bad_End;
-
-		if (urb->actual_length == 0) {
-			ub_state_stat_counted(sc, cmd);
-			return;
-		}
-
-		/*
-		 * Check the returned Bulk protocol status.
-		 * The status block has to be validated first.
-		 */
-
-		bcs = &sc->work_bcs;
-
-		if (sc->signature == cpu_to_le32(0)) {
-			/*
-			 * This is the first reply, so do not perform the check.
-			 * Instead, remember the signature the device uses
-			 * for future checks. But do not allow a nul.
-			 */
-			sc->signature = bcs->Signature;
-			if (sc->signature == cpu_to_le32(0)) {
-				ub_state_stat_counted(sc, cmd);
-				return;
-			}
-		} else {
-			if (bcs->Signature != sc->signature) {
-				ub_state_stat_counted(sc, cmd);
-				return;
-			}
-		}
-
-		if (bcs->Tag != cmd->tag) {
-			/*
-			 * This usually happens when we disagree with the
-			 * device's microcode about something. For instance,
-			 * a few of them throw this after timeouts. They buffer
-			 * commands and reply at commands we timed out before.
-			 * Without flushing these replies we loop forever.
-			 */
-			ub_state_stat_counted(sc, cmd);
-			return;
-		}
-
-		if (!sc->bad_resid) {
-			len = le32_to_cpu(bcs->Residue);
-			if (len != cmd->len - cmd->act_len) {
-				/*
-				 * Only start ignoring if this cmd ended well.
-				 */
-				if (cmd->len == cmd->act_len) {
-					printk(KERN_NOTICE "%s: "
-					    "bad residual %d of %d, ignoring\n",
-					    sc->name, len, cmd->len);
-					sc->bad_resid = 1;
-				}
-			}
-		}
-
-		switch (bcs->Status) {
-		case US_BULK_STAT_OK:
-			break;
-		case US_BULK_STAT_FAIL:
-			ub_state_sense(sc, cmd);
-			return;
-		case US_BULK_STAT_PHASE:
-			goto Bad_End;
-		default:
-			printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
-			    sc->name, bcs->Status);
-			ub_state_done(sc, cmd, -EINVAL);
-			return;
-		}
-
-		/* Not zeroing error to preserve a babble indicator */
-		if (cmd->error != 0) {
-			ub_state_sense(sc, cmd);
-			return;
-		}
-		cmd->state = UB_CMDST_DONE;
-		ub_cmdq_pop(sc);
-		(*cmd->done)(sc, cmd);
-
-	} else if (cmd->state == UB_CMDST_SENSE) {
-		ub_state_done(sc, cmd, -EIO);
-
-	} else {
-		printk(KERN_WARNING "%s: wrong command state %d\n",
-		    sc->name, cmd->state);
-		ub_state_done(sc, cmd, -EINVAL);
-		return;
-	}
-	return;
-
-Bad_End: /* Little Excel is dead */
-	ub_state_done(sc, cmd, -EIO);
-}
-
-/*
- * Factorization helper for the command state machine:
- * Initiate a data segment transfer.
- */
-static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct scatterlist *sg = &cmd->sgv[cmd->current_sg];
-	int pipe;
-	int rc;
-
-	UB_INIT_COMPLETION(sc->work_done);
-
-	if (cmd->dir == UB_DIR_READ)
-		pipe = sc->recv_bulk_pipe;
-	else
-		pipe = sc->send_bulk_pipe;
-	sc->last_pipe = pipe;
-	usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe, sg_virt(sg),
-	    sg->length, ub_urb_complete, sc);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
-		/* XXX Clear stalls */
-		ub_complete(&sc->work_done);
-		ub_state_done(sc, cmd, rc);
-		return;
-	}
-
-	if (cmd->timeo)
-		sc->work_timer.expires = jiffies + cmd->timeo;
-	else
-		sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
-	add_timer(&sc->work_timer);
-
-	cmd->state = UB_CMDST_DATA;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Finish the command.
- */
-static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
-{
-
-	cmd->error = rc;
-	cmd->state = UB_CMDST_DONE;
-	ub_cmdq_pop(sc);
-	(*cmd->done)(sc, cmd);
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read.
- */
-static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	int rc;
-
-	UB_INIT_COMPLETION(sc->work_done);
-
-	sc->last_pipe = sc->recv_bulk_pipe;
-	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
-	    &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
-		/* XXX Clear stalls */
-		ub_complete(&sc->work_done);
-		ub_state_done(sc, cmd, rc);
-		return -1;
-	}
-
-	if (cmd->timeo)
-		sc->work_timer.expires = jiffies + cmd->timeo;
-	else
-		sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
-	add_timer(&sc->work_timer);
-	return 0;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read and go to STAT state.
- */
-static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
-	if (__ub_state_stat(sc, cmd) != 0)
-		return;
-
-	cmd->stat_count = 0;
-	cmd->state = UB_CMDST_STAT;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read and go to STAT state with counter (along [C] path).
- */
-static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
-	if (++cmd->stat_count >= 4) {
-		ub_state_sense(sc, cmd);
-		return;
-	}
-
-	if (__ub_state_stat(sc, cmd) != 0)
-		return;
-
-	cmd->state = UB_CMDST_STAT;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a REQUEST SENSE and go to SENSE state.
- */
-static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct ub_scsi_cmd *scmd;
-	struct scatterlist *sg;
-	int rc;
-
-	if (cmd->cdb[0] == REQUEST_SENSE) {
-		rc = -EPIPE;
-		goto error;
-	}
-
-	scmd = &sc->top_rqs_cmd;
-	memset(scmd, 0, sizeof(struct ub_scsi_cmd));
-	scmd->cdb[0] = REQUEST_SENSE;
-	scmd->cdb[4] = UB_SENSE_SIZE;
-	scmd->cdb_len = 6;
-	scmd->dir = UB_DIR_READ;
-	scmd->state = UB_CMDST_INIT;
-	scmd->nsg = 1;
-	sg = &scmd->sgv[0];
-	sg_init_table(sg, UB_MAX_REQ_SG);
-	sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
-			(unsigned long)sc->top_sense & (PAGE_SIZE-1));
-	scmd->len = UB_SENSE_SIZE;
-	scmd->lun = cmd->lun;
-	scmd->done = ub_top_sense_done;
-	scmd->back = cmd;
-
-	scmd->tag = sc->tagcnt++;
-
-	cmd->state = UB_CMDST_SENSE;
-
-	ub_cmdq_insert(sc, scmd);
-	return;
-
-error:
-	ub_state_done(sc, cmd, rc);
-}
-
-/*
- * A helper for the command's state machine:
- * Submit a stall clear.
- */
-static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    int stalled_pipe)
-{
-	int endp;
-	struct usb_ctrlrequest *cr;
-	int rc;
-
-	endp = usb_pipeendpoint(stalled_pipe);
-	if (usb_pipein (stalled_pipe))
-		endp |= USB_DIR_IN;
-
-	cr = &sc->work_cr;
-	cr->bRequestType = USB_RECIP_ENDPOINT;
-	cr->bRequest = USB_REQ_CLEAR_FEATURE;
-	cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
-	cr->wIndex = cpu_to_le16(endp);
-	cr->wLength = cpu_to_le16(0);
-
-	UB_INIT_COMPLETION(sc->work_done);
-
-	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
-	    (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
-		ub_complete(&sc->work_done);
-		return rc;
-	}
-
-	sc->work_timer.expires = jiffies + UB_CTRL_TIMEOUT;
-	add_timer(&sc->work_timer);
-	return 0;
-}
-
-/*
- */
-static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
-{
-	unsigned char *sense = sc->top_sense;
-	struct ub_scsi_cmd *cmd;
-
-	/*
-	 * Find the command which triggered the unit attention or a check,
-	 * save the sense into it, and advance its state machine.
-	 */
-	if ((cmd = ub_cmdq_peek(sc)) == NULL) {
-		printk(KERN_WARNING "%s: sense done while idle\n", sc->name);
-		return;
-	}
-	if (cmd != scmd->back) {
-		printk(KERN_WARNING "%s: "
-		    "sense done for wrong command 0x%x\n",
-		    sc->name, cmd->tag);
-		return;
-	}
-	if (cmd->state != UB_CMDST_SENSE) {
-		printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
-		    sc->name, cmd->state);
-		return;
-	}
-
-	/*
-	 * Ignoring scmd->act_len, because the buffer was pre-zeroed.
-	 */
-	cmd->key = sense[2] & 0x0F;
-	cmd->asc = sense[12];
-	cmd->ascq = sense[13];
-
-	ub_scsi_urb_compl(sc, cmd);
-}
-
-/*
- * Reset management
- */
-
-static void ub_reset_enter(struct ub_dev *sc, int try)
-{
-
-	if (sc->reset) {
-		/* This happens often on multi-LUN devices. */
-		return;
-	}
-	sc->reset = try + 1;
-
-#if 0 /* Not needed because the disconnect waits for us. */
-	unsigned long flags;
-	spin_lock_irqsave(&ub_lock, flags);
-	sc->openc++;
-	spin_unlock_irqrestore(&ub_lock, flags);
-#endif
-
-#if 0 /* We let them stop themselves. */
-	struct ub_lun *lun;
-	list_for_each_entry(lun, &sc->luns, link) {
-		blk_stop_queue(lun->disk->queue);
-	}
-#endif
-
-	schedule_work(&sc->reset_work);
-}
-
-static void ub_reset_task(struct work_struct *work)
-{
-	struct ub_dev *sc = container_of(work, struct ub_dev, reset_work);
-	unsigned long flags;
-	struct ub_lun *lun;
-	int rc;
-
-	if (!sc->reset) {
-		printk(KERN_WARNING "%s: Running reset unrequested\n",
-		    sc->name);
-		return;
-	}
-
-	if (atomic_read(&sc->poison)) {
-		;
-	} else if ((sc->reset & 1) == 0) {
-		ub_sync_reset(sc);
-		msleep(700);	/* usb-storage sleeps 6s (!) */
-		ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
-		ub_probe_clear_stall(sc, sc->send_bulk_pipe);
-	} else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
-		;
-	} else {
-		rc = usb_lock_device_for_reset(sc->dev, sc->intf);
-		if (rc < 0) {
-			printk(KERN_NOTICE
-			    "%s: usb_lock_device_for_reset failed (%d)\n",
-			    sc->name, rc);
-		} else {
-			rc = usb_reset_device(sc->dev);
-			if (rc < 0) {
-				printk(KERN_NOTICE "%s: "
-				    "usb_lock_device_for_reset failed (%d)\n",
-				    sc->name, rc);
-			}
-			usb_unlock_device(sc->dev);
-		}
-	}
-
-	/*
-	 * In theory, no commands can be running while reset is active,
-	 * so nobody can ask for another reset, and so we do not need any
-	 * queues of resets or anything. We do need a spinlock though,
-	 * to interact with block layer.
-	 */
-	spin_lock_irqsave(sc->lock, flags);
-	sc->reset = 0;
-	tasklet_schedule(&sc->tasklet);
-	list_for_each_entry(lun, &sc->luns, link) {
-		blk_start_queue(lun->disk->queue);
-	}
-	wake_up(&sc->reset_wait);
-	spin_unlock_irqrestore(sc->lock, flags);
-}
-
-/*
- * XXX Reset brackets are too much hassle to implement, so just stub them
- * in order to prevent forced unbinding (which deadlocks solid when our
- * ->disconnect method waits for the reset to complete and this kills keventd).
- *
- * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
- * or else the post_reset is invoked, and restats I/O on a locked device.
- */
-static int ub_pre_reset(struct usb_interface *iface) {
-	return 0;
-}
-
-static int ub_post_reset(struct usb_interface *iface) {
-	return 0;
-}
-
-/*
- * This is called from a process context.
- */
-static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
-{
-
-	lun->readonly = 0;	/* XXX Query this from the device */
-
-	lun->capacity.nsec = 0;
-	lun->capacity.bsize = 512;
-	lun->capacity.bshift = 0;
-
-	if (ub_sync_tur(sc, lun) != 0)
-		return;			/* Not ready */
-	lun->changed = 0;
-
-	if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
-		/*
-		 * The retry here means something is wrong, either with the
-		 * device, with the transport, or with our code.
-		 * We keep this because sd.c has retries for capacity.
-		 */
-		if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
-			lun->capacity.nsec = 0;
-			lun->capacity.bsize = 512;
-			lun->capacity.bshift = 0;
-		}
-	}
-}
-
-/*
- * The open funcion.
- * This is mostly needed to keep refcounting, but also to support
- * media checks on removable media drives.
- */
-static int ub_bd_open(struct block_device *bdev, fmode_t mode)
-{
-	struct ub_lun *lun = bdev->bd_disk->private_data;
-	struct ub_dev *sc = lun->udev;
-	unsigned long flags;
-	int rc;
-
-	spin_lock_irqsave(&ub_lock, flags);
-	if (atomic_read(&sc->poison)) {
-		spin_unlock_irqrestore(&ub_lock, flags);
-		return -ENXIO;
-	}
-	sc->openc++;
-	spin_unlock_irqrestore(&ub_lock, flags);
-
-	if (lun->removable || lun->readonly)
-		check_disk_change(bdev);
-
-	/*
-	 * The sd.c considers ->media_present and ->changed not equivalent,
-	 * under some pretty murky conditions (a failure of READ CAPACITY).
-	 * We may need it one day.
-	 */
-	if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) {
-		rc = -ENOMEDIUM;
-		goto err_open;
-	}
-
-	if (lun->readonly && (mode & FMODE_WRITE)) {
-		rc = -EROFS;
-		goto err_open;
-	}
-
-	return 0;
-
-err_open:
-	ub_put(sc);
-	return rc;
-}
-
-static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode)
-{
-	int ret;
-
-	mutex_lock(&ub_mutex);
-	ret = ub_bd_open(bdev, mode);
-	mutex_unlock(&ub_mutex);
-
-	return ret;
-}
-
-
-/*
- */
-static int ub_bd_release(struct gendisk *disk, fmode_t mode)
-{
-	struct ub_lun *lun = disk->private_data;
-	struct ub_dev *sc = lun->udev;
-
-	mutex_lock(&ub_mutex);
-	ub_put(sc);
-	mutex_unlock(&ub_mutex);
-
-	return 0;
-}
-
-/*
- * The ioctl interface.
- */
-static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
-    unsigned int cmd, unsigned long arg)
-{
-	void __user *usermem = (void __user *) arg;
-	int ret;
-
-	mutex_lock(&ub_mutex);
-	ret = scsi_cmd_blk_ioctl(bdev, mode, cmd, usermem);
-	mutex_unlock(&ub_mutex);
-
-	return ret;
-}
-
-/*
- * This is called by check_disk_change if we reported a media change.
- * The main onjective here is to discover the features of the media such as
- * the capacity, read-only status, etc. USB storage generally does not
- * need to be spun up, but if we needed it, this would be the place.
- *
- * This call can sleep.
- *
- * The return code is not used.
- */
-static int ub_bd_revalidate(struct gendisk *disk)
-{
-	struct ub_lun *lun = disk->private_data;
-
-	ub_revalidate(lun->udev, lun);
-
-	/* XXX Support sector size switching like in sr.c */
-	blk_queue_logical_block_size(disk->queue, lun->capacity.bsize);
-	set_capacity(disk, lun->capacity.nsec);
-	// set_disk_ro(sdkp->disk, lun->readonly);
-
-	return 0;
-}
-
-/*
- * The check is called by the block layer to verify if the media
- * is still available. It is supposed to be harmless, lightweight and
- * non-intrusive in case the media was not changed.
- *
- * This call can sleep.
- *
- * The return code is bool!
- */
-static unsigned int ub_bd_check_events(struct gendisk *disk,
-				       unsigned int clearing)
-{
-	struct ub_lun *lun = disk->private_data;
-
-	if (!lun->removable)
-		return 0;
-
-	/*
-	 * We clean checks always after every command, so this is not
-	 * as dangerous as it looks. If the TEST_UNIT_READY fails here,
-	 * the device is actually not ready with operator or software
-	 * intervention required. One dangerous item might be a drive which
-	 * spins itself down, and come the time to write dirty pages, this
-	 * will fail, then block layer discards the data. Since we never
-	 * spin drives up, such devices simply cannot be used with ub anyway.
-	 */
-	if (ub_sync_tur(lun->udev, lun) != 0) {
-		lun->changed = 1;
-		return DISK_EVENT_MEDIA_CHANGE;
-	}
-
-	return lun->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
-}
-
-static const struct block_device_operations ub_bd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ub_bd_unlocked_open,
-	.release	= ub_bd_release,
-	.ioctl		= ub_bd_ioctl,
-	.check_events	= ub_bd_check_events,
-	.revalidate_disk = ub_bd_revalidate,
-};
-
-/*
- * Common ->done routine for commands executed synchronously.
- */
-static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-	struct completion *cop = cmd->back;
-	complete(cop);
-}
-
-/*
- * Test if the device has a check condition on it, synchronously.
- */
-static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
-{
-	struct ub_scsi_cmd *cmd;
-	enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
-	unsigned long flags;
-	struct completion compl;
-	int rc;
-
-	init_completion(&compl);
-
-	rc = -ENOMEM;
-	if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
-		goto err_alloc;
-
-	cmd->cdb[0] = TEST_UNIT_READY;
-	cmd->cdb_len = 6;
-	cmd->dir = UB_DIR_NONE;
-	cmd->state = UB_CMDST_INIT;
-	cmd->lun = lun;			/* This may be NULL, but that's ok */
-	cmd->done = ub_probe_done;
-	cmd->back = &compl;
-
-	spin_lock_irqsave(sc->lock, flags);
-	cmd->tag = sc->tagcnt++;
-
-	rc = ub_submit_scsi(sc, cmd);
-	spin_unlock_irqrestore(sc->lock, flags);
-
-	if (rc != 0)
-		goto err_submit;
-
-	wait_for_completion(&compl);
-
-	rc = cmd->error;
-
-	if (rc == -EIO && cmd->key != 0)	/* Retries for benh's key */
-		rc = cmd->key;
-
-err_submit:
-	kfree(cmd);
-err_alloc:
-	return rc;
-}
-
-/*
- * Read the SCSI capacity synchronously (for probing).
- */
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
-    struct ub_capacity *ret)
-{
-	struct ub_scsi_cmd *cmd;
-	struct scatterlist *sg;
-	char *p;
-	enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 };
-	unsigned long flags;
-	unsigned int bsize, shift;
-	unsigned long nsec;
-	struct completion compl;
-	int rc;
-
-	init_completion(&compl);
-
-	rc = -ENOMEM;
-	if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
-		goto err_alloc;
-	p = (char *)cmd + sizeof(struct ub_scsi_cmd);
-
-	cmd->cdb[0] = 0x25;
-	cmd->cdb_len = 10;
-	cmd->dir = UB_DIR_READ;
-	cmd->state = UB_CMDST_INIT;
-	cmd->nsg = 1;
-	sg = &cmd->sgv[0];
-	sg_init_table(sg, UB_MAX_REQ_SG);
-	sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
-	cmd->len = 8;
-	cmd->lun = lun;
-	cmd->done = ub_probe_done;
-	cmd->back = &compl;
-
-	spin_lock_irqsave(sc->lock, flags);
-	cmd->tag = sc->tagcnt++;
-
-	rc = ub_submit_scsi(sc, cmd);
-	spin_unlock_irqrestore(sc->lock, flags);
-
-	if (rc != 0)
-		goto err_submit;
-
-	wait_for_completion(&compl);
-
-	if (cmd->error != 0) {
-		rc = -EIO;
-		goto err_read;
-	}
-	if (cmd->act_len != 8) {
-		rc = -EIO;
-		goto err_read;
-	}
-
-	/* sd.c special-cases sector size of 0 to mean 512. Needed? Safe? */
-	nsec = be32_to_cpu(*(__be32 *)p) + 1;
-	bsize = be32_to_cpu(*(__be32 *)(p + 4));
-	switch (bsize) {
-	case 512:	shift = 0;	break;
-	case 1024:	shift = 1;	break;
-	case 2048:	shift = 2;	break;
-	case 4096:	shift = 3;	break;
-	default:
-		rc = -EDOM;
-		goto err_inv_bsize;
-	}
-
-	ret->bsize = bsize;
-	ret->bshift = shift;
-	ret->nsec = nsec << shift;
-	rc = 0;
-
-err_inv_bsize:
-err_read:
-err_submit:
-	kfree(cmd);
-err_alloc:
-	return rc;
-}
-
-/*
- */
-static void ub_probe_urb_complete(struct urb *urb)
-{
-	struct completion *cop = urb->context;
-	complete(cop);
-}
-
-static void ub_probe_timeout(unsigned long arg)
-{
-	struct completion *cop = (struct completion *) arg;
-	complete(cop);
-}
-
-/*
- * Reset with a Bulk reset.
- */
-static int ub_sync_reset(struct ub_dev *sc)
-{
-	int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
-	struct usb_ctrlrequest *cr;
-	struct completion compl;
-	struct timer_list timer;
-	int rc;
-
-	init_completion(&compl);
-
-	cr = &sc->work_cr;
-	cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
-	cr->bRequest = US_BULK_RESET_REQUEST;
-	cr->wValue = cpu_to_le16(0);
-	cr->wIndex = cpu_to_le16(ifnum);
-	cr->wLength = cpu_to_le16(0);
-
-	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
-	    (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
-		printk(KERN_WARNING
-		     "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
-		return rc;
-	}
-
-	init_timer(&timer);
-	timer.function = ub_probe_timeout;
-	timer.data = (unsigned long) &compl;
-	timer.expires = jiffies + UB_CTRL_TIMEOUT;
-	add_timer(&timer);
-
-	wait_for_completion(&compl);
-
-	del_timer_sync(&timer);
-	usb_kill_urb(&sc->work_urb);
-
-	return sc->work_urb.status;
-}
-
-/*
- * Get number of LUNs by the way of Bulk GetMaxLUN command.
- */
-static int ub_sync_getmaxlun(struct ub_dev *sc)
-{
-	int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
-	unsigned char *p;
-	enum { ALLOC_SIZE = 1 };
-	struct usb_ctrlrequest *cr;
-	struct completion compl;
-	struct timer_list timer;
-	int nluns;
-	int rc;
-
-	init_completion(&compl);
-
-	rc = -ENOMEM;
-	if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
-		goto err_alloc;
-	*p = 55;
-
-	cr = &sc->work_cr;
-	cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
-	cr->bRequest = US_BULK_GET_MAX_LUN;
-	cr->wValue = cpu_to_le16(0);
-	cr->wIndex = cpu_to_le16(ifnum);
-	cr->wLength = cpu_to_le16(1);
-
-	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
-	    (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0)
-		goto err_submit;
-
-	init_timer(&timer);
-	timer.function = ub_probe_timeout;
-	timer.data = (unsigned long) &compl;
-	timer.expires = jiffies + UB_CTRL_TIMEOUT;
-	add_timer(&timer);
-
-	wait_for_completion(&compl);
-
-	del_timer_sync(&timer);
-	usb_kill_urb(&sc->work_urb);
-
-	if ((rc = sc->work_urb.status) < 0)
-		goto err_io;
-
-	if (sc->work_urb.actual_length != 1) {
-		nluns = 0;
-	} else {
-		if ((nluns = *p) == 55) {
-			nluns = 0;
-		} else {
-  			/* GetMaxLUN returns the maximum LUN number */
-			nluns += 1;
-			if (nluns > UB_MAX_LUNS)
-				nluns = UB_MAX_LUNS;
-		}
-	}
-
-	kfree(p);
-	return nluns;
-
-err_io:
-err_submit:
-	kfree(p);
-err_alloc:
-	return rc;
-}
-
-/*
- * Clear initial stalls.
- */
-static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
-{
-	int endp;
-	struct usb_ctrlrequest *cr;
-	struct completion compl;
-	struct timer_list timer;
-	int rc;
-
-	init_completion(&compl);
-
-	endp = usb_pipeendpoint(stalled_pipe);
-	if (usb_pipein (stalled_pipe))
-		endp |= USB_DIR_IN;
-
-	cr = &sc->work_cr;
-	cr->bRequestType = USB_RECIP_ENDPOINT;
-	cr->bRequest = USB_REQ_CLEAR_FEATURE;
-	cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
-	cr->wIndex = cpu_to_le16(endp);
-	cr->wLength = cpu_to_le16(0);
-
-	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
-	    (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-
-	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
-		printk(KERN_WARNING
-		     "%s: Unable to submit a probe clear (%d)\n", sc->name, rc);
-		return rc;
-	}
-
-	init_timer(&timer);
-	timer.function = ub_probe_timeout;
-	timer.data = (unsigned long) &compl;
-	timer.expires = jiffies + UB_CTRL_TIMEOUT;
-	add_timer(&timer);
-
-	wait_for_completion(&compl);
-
-	del_timer_sync(&timer);
-	usb_kill_urb(&sc->work_urb);
-
-	usb_reset_endpoint(sc->dev, endp);
-
-	return 0;
-}
-
-/*
- * Get the pipe settings.
- */
-static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
-    struct usb_interface *intf)
-{
-	struct usb_host_interface *altsetting = intf->cur_altsetting;
-	struct usb_endpoint_descriptor *ep_in = NULL;
-	struct usb_endpoint_descriptor *ep_out = NULL;
-	struct usb_endpoint_descriptor *ep;
-	int i;
-
-	/*
-	 * Find the endpoints we need.
-	 * We are expecting a minimum of 2 endpoints - in and out (bulk).
-	 * We will ignore any others.
-	 */
-	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
-		ep = &altsetting->endpoint[i].desc;
-
-		/* Is it a BULK endpoint? */
-		if (usb_endpoint_xfer_bulk(ep)) {
-			/* BULK in or out? */
-			if (usb_endpoint_dir_in(ep)) {
-				if (ep_in == NULL)
-					ep_in = ep;
-			} else {
-				if (ep_out == NULL)
-					ep_out = ep;
-			}
-		}
-	}
-
-	if (ep_in == NULL || ep_out == NULL) {
-		printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
-		return -ENODEV;
-	}
-
-	/* Calculate and store the pipe values */
-	sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0);
-	sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0);
-	sc->send_bulk_pipe = usb_sndbulkpipe(dev,
-		usb_endpoint_num(ep_out));
-	sc->recv_bulk_pipe = usb_rcvbulkpipe(dev, 
-		usb_endpoint_num(ep_in));
-
-	return 0;
-}
-
-/*
- * Probing is done in the process context, which allows us to cheat
- * and not to build a state machine for the discovery.
- */
-static int ub_probe(struct usb_interface *intf,
-    const struct usb_device_id *dev_id)
-{
-	struct ub_dev *sc;
-	int nluns;
-	int rc;
-	int i;
-
-	if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
-		return -ENXIO;
-
-	rc = -ENOMEM;
-	if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
-		goto err_core;
-	sc->lock = ub_next_lock();
-	INIT_LIST_HEAD(&sc->luns);
-	usb_init_urb(&sc->work_urb);
-	tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
-	atomic_set(&sc->poison, 0);
-	INIT_WORK(&sc->reset_work, ub_reset_task);
-	init_waitqueue_head(&sc->reset_wait);
-
-	init_timer(&sc->work_timer);
-	sc->work_timer.data = (unsigned long) sc;
-	sc->work_timer.function = ub_urb_timeout;
-
-	ub_init_completion(&sc->work_done);
-	sc->work_done.done = 1;		/* A little yuk, but oh well... */
-
-	sc->dev = interface_to_usbdev(intf);
-	sc->intf = intf;
-	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-	usb_set_intfdata(intf, sc);
-	usb_get_dev(sc->dev);
-	/*
-	 * Since we give the interface struct to the block level through
-	 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
-	 * oopses on close after a disconnect (kernels 2.6.16 and up).
-	 */
-	usb_get_intf(sc->intf);
-
-	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
-	    sc->dev->bus->busnum, sc->dev->devnum);
-
-	/* XXX Verify that we can handle the device (from descriptors) */
-
-	if (ub_get_pipes(sc, sc->dev, intf) != 0)
-		goto err_dev_desc;
-
-	/*
-	 * At this point, all USB initialization is done, do upper layer.
-	 * We really hate halfway initialized structures, so from the
-	 * invariants perspective, this ub_dev is fully constructed at
-	 * this point.
-	 */
-
-	/*
-	 * This is needed to clear toggles. It is a problem only if we do
-	 * `rmmod ub && modprobe ub` without disconnects, but we like that.
-	 */
-#if 0 /* iPod Mini fails if we do this (big white iPod works) */
-	ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
-	ub_probe_clear_stall(sc, sc->send_bulk_pipe);
-#endif
-
-	/*
-	 * The way this is used by the startup code is a little specific.
-	 * A SCSI check causes a USB stall. Our common case code sees it
-	 * and clears the check, after which the device is ready for use.
-	 * But if a check was not present, any command other than
-	 * TEST_UNIT_READY ends with a lockup (including REQUEST_SENSE).
-	 *
-	 * If we neglect to clear the SCSI check, the first real command fails
-	 * (which is the capacity readout). We clear that and retry, but why
-	 * causing spurious retries for no reason.
-	 *
-	 * Revalidation may start with its own TEST_UNIT_READY, but that one
-	 * has to succeed, so we clear checks with an additional one here.
-	 * In any case it's not our business how revaliadation is implemented.
-	 */
-	for (i = 0; i < 3; i++) {  /* Retries for the schwag key from KS'04 */
-		if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
-		if (rc != 0x6) break;
-		msleep(10);
-	}
-
-	nluns = 1;
-	for (i = 0; i < 3; i++) {
-		if ((rc = ub_sync_getmaxlun(sc)) < 0)
-			break;
-		if (rc != 0) {
-			nluns = rc;
-			break;
-		}
-		msleep(100);
-	}
-
-	for (i = 0; i < nluns; i++) {
-		ub_probe_lun(sc, i);
-	}
-	return 0;
-
-err_dev_desc:
-	usb_set_intfdata(intf, NULL);
-	usb_put_intf(sc->intf);
-	usb_put_dev(sc->dev);
-	kfree(sc);
-err_core:
-	return rc;
-}
-
-static int ub_probe_lun(struct ub_dev *sc, int lnum)
-{
-	struct ub_lun *lun;
-	struct request_queue *q;
-	struct gendisk *disk;
-	int rc;
-
-	rc = -ENOMEM;
-	if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
-		goto err_alloc;
-	lun->num = lnum;
-
-	rc = -ENOSR;
-	if ((lun->id = ub_id_get()) == -1)
-		goto err_id;
-
-	lun->udev = sc;
-
-	snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
-	    lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
-
-	lun->removable = 1;		/* XXX Query this from the device */
-	lun->changed = 1;		/* ub_revalidate clears only */
-	ub_revalidate(sc, lun);
-
-	rc = -ENOMEM;
-	if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL)
-		goto err_diskalloc;
-
-	sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
-	disk->major = UB_MAJOR;
-	disk->first_minor = lun->id * UB_PARTS_PER_LUN;
-	disk->fops = &ub_bd_fops;
-	disk->private_data = lun;
-	disk->driverfs_dev = &sc->intf->dev;
-
-	rc = -ENOMEM;
-	if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
-		goto err_blkqinit;
-
-	disk->queue = q;
-
-	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
-	blk_queue_max_segments(q, UB_MAX_REQ_SG);
-	blk_queue_segment_boundary(q, 0xffffffff);	/* Dubious. */
-	blk_queue_max_hw_sectors(q, UB_MAX_SECTORS);
-	blk_queue_logical_block_size(q, lun->capacity.bsize);
-
-	lun->disk = disk;
-	q->queuedata = lun;
-	list_add(&lun->link, &sc->luns);
-
-	set_capacity(disk, lun->capacity.nsec);
-	if (lun->removable)
-		disk->flags |= GENHD_FL_REMOVABLE;
-
-	add_disk(disk);
-
-	return 0;
-
-err_blkqinit:
-	put_disk(disk);
-err_diskalloc:
-	ub_id_put(lun->id);
-err_id:
-	kfree(lun);
-err_alloc:
-	return rc;
-}
-
-static void ub_disconnect(struct usb_interface *intf)
-{
-	struct ub_dev *sc = usb_get_intfdata(intf);
-	struct ub_lun *lun;
-	unsigned long flags;
-
-	/*
-	 * Prevent ub_bd_release from pulling the rug from under us.
-	 * XXX This is starting to look like a kref.
-	 * XXX Why not to take this ref at probe time?
-	 */
-	spin_lock_irqsave(&ub_lock, flags);
-	sc->openc++;
-	spin_unlock_irqrestore(&ub_lock, flags);
-
-	/*
-	 * Fence stall clearings, operations triggered by unlinkings and so on.
-	 * We do not attempt to unlink any URBs, because we do not trust the
-	 * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
-	 */
-	atomic_set(&sc->poison, 1);
-
-	/*
-	 * Wait for reset to end, if any.
-	 */
-	wait_event(sc->reset_wait, !sc->reset);
-
-	/*
-	 * Blow away queued commands.
-	 *
-	 * Actually, this never works, because before we get here
-	 * the HCD terminates outstanding URB(s). It causes our
-	 * SCSI command queue to advance, commands fail to submit,
-	 * and the whole queue drains. So, we just use this code to
-	 * print warnings.
-	 */
-	spin_lock_irqsave(sc->lock, flags);
-	{
-		struct ub_scsi_cmd *cmd;
-		int cnt = 0;
-		while ((cmd = ub_cmdq_peek(sc)) != NULL) {
-			cmd->error = -ENOTCONN;
-			cmd->state = UB_CMDST_DONE;
-			ub_cmdq_pop(sc);
-			(*cmd->done)(sc, cmd);
-			cnt++;
-		}
-		if (cnt != 0) {
-			printk(KERN_WARNING "%s: "
-			    "%d was queued after shutdown\n", sc->name, cnt);
-		}
-	}
-	spin_unlock_irqrestore(sc->lock, flags);
-
-	/*
-	 * Unregister the upper layer.
-	 */
-	list_for_each_entry(lun, &sc->luns, link) {
-		del_gendisk(lun->disk);
-		/*
-		 * I wish I could do:
-		 *    queue_flag_set(QUEUE_FLAG_DEAD, q);
-		 * As it is, we rely on our internal poisoning and let
-		 * the upper levels to spin furiously failing all the I/O.
-		 */
-	}
-
-	/*
-	 * Testing for -EINPROGRESS is always a bug, so we are bending
-	 * the rules a little.
-	 */
-	spin_lock_irqsave(sc->lock, flags);
-	if (sc->work_urb.status == -EINPROGRESS) {	/* janitors: ignore */
-		printk(KERN_WARNING "%s: "
-		    "URB is active after disconnect\n", sc->name);
-	}
-	spin_unlock_irqrestore(sc->lock, flags);
-
-	/*
-	 * There is virtually no chance that other CPU runs a timeout so long
-	 * after ub_urb_complete should have called del_timer, but only if HCD
-	 * didn't forget to deliver a callback on unlink.
-	 */
-	del_timer_sync(&sc->work_timer);
-
-	/*
-	 * At this point there must be no commands coming from anyone
-	 * and no URBs left in transit.
-	 */
-
-	ub_put(sc);
-}
-
-static struct usb_driver ub_driver = {
-	.name =		"ub",
-	.probe =	ub_probe,
-	.disconnect =	ub_disconnect,
-	.id_table =	ub_usb_ids,
-	.pre_reset =	ub_pre_reset,
-	.post_reset =	ub_post_reset,
-};
-
-static int __init ub_init(void)
-{
-	int rc;
-	int i;
-
-	pr_info("'Low Performance USB Block' driver is deprecated. "
-			"Please switch to usb-storage\n");
-	for (i = 0; i < UB_QLOCK_NUM; i++)
-		spin_lock_init(&ub_qlockv[i]);
-
-	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
-		goto err_regblkdev;
-
-	if ((rc = usb_register(&ub_driver)) != 0)
-		goto err_register;
-
-	usb_usual_set_present(USB_US_TYPE_UB);
-	return 0;
-
-err_register:
-	unregister_blkdev(UB_MAJOR, DRV_NAME);
-err_regblkdev:
-	return rc;
-}
-
-static void __exit ub_exit(void)
-{
-	usb_deregister(&ub_driver);
-
-	unregister_blkdev(UB_MAJOR, DRV_NAME);
-	usb_usual_clear_present(USB_US_TYPE_UB);
-}
-
-module_init(ub_init);
-module_exit(ub_exit);
-
-MODULE_LICENSE("GPL");