summaryrefslogtreecommitdiffstats
path: root/drivers/block/swim3.c
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-12-01 14:36:28 +0000
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-12-09 17:09:14 +1100
commitd58b0c39e32f1b410af4d070f9d1a1416057c166 (patch)
treea4a9011c229c5d8d7b953dd5e1b0b70fa28d0a37 /drivers/block/swim3.c
parent128b4a0ef74e8d48033513e41a413087ba30e36b (diff)
downloadop-kernel-dev-d58b0c39e32f1b410af4d070f9d1a1416057c166.zip
op-kernel-dev-d58b0c39e32f1b410af4d070f9d1a1416057c166.tar.gz
powerpc/macio: Rework hotplug media bay support
The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Diffstat (limited to 'drivers/block/swim3.c')
-rw-r--r--drivers/block/swim3.c39
1 files changed, 16 insertions, 23 deletions
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 6380ad8..59ca2b7 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -200,7 +200,7 @@ struct floppy_state {
int ejected;
wait_queue_head_t wait;
int wanted;
- struct device_node* media_bay; /* NULL when not in bay */
+ struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
};
@@ -303,14 +303,13 @@ static int swim3_readbit(struct floppy_state *fs, int bit)
static void do_fd_request(struct request_queue * q)
{
int i;
- for(i=0;i<floppy_count;i++)
- {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (floppy_states[i].media_bay &&
- check_media_bay(floppy_states[i].media_bay, MB_FD))
+
+ for(i=0; i<floppy_count; i++) {
+ struct floppy_state *fs = &floppy_states[i];
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
continue;
-#endif /* CONFIG_PMAC_MEDIABAY */
- start_request(&floppy_states[i]);
+ start_request(fs);
}
}
@@ -849,10 +848,9 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
switch (cmd) {
case FDEJECT:
@@ -876,10 +874,9 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
int n, err = 0;
if (fs->ref_count == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
@@ -963,10 +960,9 @@ static int floppy_revalidate(struct gendisk *disk)
struct swim3 __iomem *sw;
int ret, n;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
@@ -1009,7 +1005,6 @@ static const struct block_device_operations floppy_fops = {
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.node;
- struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
@@ -1036,9 +1031,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
}
dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
- swim->parent : NULL;
- if (mediabay == NULL)
+ if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
@@ -1068,7 +1061,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
- fs->media_bay = mediabay;
+ fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
@@ -1093,7 +1086,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
init_timer(&fs->timeout);
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
- mediabay ? "in media bay" : "");
+ mdev->media_bay ? "in media bay" : "");
return 0;
OpenPOWER on IntegriCloud