summaryrefslogtreecommitdiffstats
path: root/drivers/block/floppy.c
diff options
context:
space:
mode:
authorJesper Juhl <jesper.juhl@gmail.com>2007-10-16 23:30:57 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-17 08:43:03 -0700
commit06f748c4754de4fe2fc8d517acf29cb46a0b2d60 (patch)
treebac644ae5bb370066de964cba5043d855be9a822 /drivers/block/floppy.c
parentd2da272a4e581e831e3567a37ef167686f1ea1d3 (diff)
downloadop-kernel-dev-06f748c4754de4fe2fc8d517acf29cb46a0b2d60.zip
op-kernel-dev-06f748c4754de4fe2fc8d517acf29cb46a0b2d60.tar.gz
floppy: do a very minimal style cleanup of the floppy driver
Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/block/floppy.c')
-rw-r--r--drivers/block/floppy.c123
1 files changed, 73 insertions, 50 deletions
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 72803a3..c6416f8 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -5,6 +5,7 @@
* Copyright (C) 1993, 1994 Alain Knaff
* Copyright (C) 1998 Alan Cox
*/
+
/*
* 02.12.91 - Changed to static variables to indicate need for reset
* and recalibrate. This makes some things easier (output_byte reset
@@ -149,7 +150,7 @@
#define REALLY_SLOW_IO
#define DEBUGT 2
-#define DCL_DEBUG /* debug disk change line */
+#define DCL_DEBUG /* debug disk change line */
/* do print messages for unexpected interrupts */
static int print_unex = 1;
@@ -161,10 +162,8 @@ static int print_unex = 1;
#include <linux/workqueue.h>
#define FDPATCHES
#include <linux/fdreg.h>
-
#include <linux/fd.h>
#include <linux/hdreg.h>
-
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
@@ -274,8 +273,7 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
return; /* we have the memory */
if (can_use_virtual_dma != 2)
return; /* no fallback allowed */
- printk
- ("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+ printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
*addr = (char *)nodma_mem_alloc(l);
#else
return;
@@ -291,8 +289,8 @@ static int initialising = 1;
#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
#define UNIT(x) ((x) & 0x03) /* drive on fdc */
#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
+ /* reverse mapping from unit and fdc to drive */
#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
- /* reverse mapping from unit and fdc to drive */
#define DP (&drive_params[current_drive])
#define DRS (&drive_state[current_drive])
#define DRWE (&write_errors[current_drive])
@@ -356,7 +354,6 @@ static int inr; /* size of reply buffer, when called from interrupt */
#define R_HEAD (reply_buffer[4])
#define R_SECTOR (reply_buffer[5])
#define R_SIZECODE (reply_buffer[6])
-
#define SEL_DLY (2*HZ/100)
/*
@@ -472,8 +469,8 @@ static struct floppy_struct floppy_type[32] = {
{ 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */
{ 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */
{ 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */
-
{ 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */
+
{ 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */
{ 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */
};
@@ -539,12 +536,12 @@ static char *floppy_track_buffer;
static int max_buffer_sectors;
static int *errors;
-typedef void (*done_f) (int);
+typedef void (*done_f)(int);
static struct cont_t {
- void (*interrupt) (void); /* this is called after the interrupt of the
+ void (*interrupt)(void); /* this is called after the interrupt of the
* main command */
- void (*redo) (void); /* this is called to retry the operation */
- void (*error) (void); /* this is called to tally an error */
+ void (*redo)(void); /* this is called to retry the operation */
+ void (*error)(void); /* this is called to tally an error */
done_f done; /* this is called to say if the operation has
* succeeded/failed */
} *cont;
@@ -694,7 +691,6 @@ static void reschedule_timeout(int drive, const char *message, int marg)
}
#define INFBOUND(a,b) (a)=max_t(int, a, b)
-
#define SUPBOUND(a,b) (a)=min_t(int, a, b)
/*
@@ -733,6 +729,7 @@ static void reschedule_timeout(int drive, const char *message, int marg)
static int disk_change(int drive)
{
int fdc = FDC(drive);
+
#ifdef FLOPPY_SANITY_CHECK
if (time_before(jiffies, UDRS->select_date + UDP->select_delay))
DPRINT("WARNING disk change called early\n");
@@ -892,7 +889,6 @@ static int _lock_fdc(int drive, int interruptible, int line)
set_current_state(TASK_RUNNING);
remove_wait_queue(&fdc_wait, &wait);
-
flush_scheduled_work();
}
command_status = FD_COMMAND_NONE;
@@ -968,7 +964,9 @@ static void floppy_off(unsigned int drive)
*/
static void scandrives(void)
{
- int i, drive, saved_drive;
+ int i;
+ int drive;
+ int saved_drive;
if (DP->select_delay)
return;
@@ -1146,7 +1144,9 @@ static void show_floppy(void);
/* waits until the fdc becomes ready */
static int wait_til_ready(void)
{
- int counter, status;
+ int status;
+ int counter;
+
if (FDCS->reset)
return -1;
for (counter = 0; counter < 10000; counter++) {
@@ -1193,7 +1193,8 @@ static int output_byte(char byte)
/* gets the response from the fdc */
static int result(void)
{
- int i, status = 0;
+ int i;
+ int status = 0;
for (i = 0; i < MAX_REPLIES; i++) {
if ((status = wait_til_ready()) < 0)
@@ -1226,6 +1227,7 @@ static int result(void)
static int need_more_output(void)
{
int status;
+
if ((status = wait_til_ready()) < 0)
return -1;
if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
@@ -1309,8 +1311,11 @@ static int fdc_configure(void)
*/
static void fdc_specify(void)
{
- unsigned char spec1, spec2;
- unsigned long srt, hlt, hut;
+ unsigned char spec1;
+ unsigned char spec2;
+ unsigned long srt;
+ unsigned long hlt;
+ unsigned long hut;
unsigned long dtr = NOMINAL_DTR;
unsigned long scale_dtr = NOMINAL_DTR;
int hlt_max_code = 0x7f;
@@ -1472,7 +1477,6 @@ static int interpret_errors(void)
tell_sector();
}
printk("\n");
-
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
@@ -1498,7 +1502,10 @@ static int interpret_errors(void)
*/
static void setup_rw_floppy(void)
{
- int i, r, flags, dflags;
+ int i;
+ int r;
+ int flags;
+ int dflags;
unsigned long ready_date;
timeout_fn function;
@@ -1728,9 +1735,9 @@ static void print_result(char *message, int inr)
/* interrupt handler. Note that this can be called externally on the Sparc */
irqreturn_t floppy_interrupt(int irq, void *dev_id)
{
- void (*handler) (void) = do_floppy;
int do_print;
unsigned long f;
+ void (*handler)(void) = do_floppy;
lasthandler = handler;
interruptjiffies = jiffies;
@@ -1915,9 +1922,10 @@ static void floppy_shutdown(unsigned long data)
/*typedef void (*timeout_fn)(unsigned long);*/
/* start motor, check media-changed condition and write protection */
-static int start_motor(void (*function) (void))
+static int start_motor(void (*function)(void))
{
- int mask, data;
+ int mask;
+ int data;
mask = 0xfc;
data = UNIT(current_drive);
@@ -2020,17 +2028,17 @@ static struct cont_t wakeup_cont = {
.interrupt = empty,
.redo = do_wakeup,
.error = empty,
- .done = (done_f) empty
+ .done = (done_f)empty
};
static struct cont_t intr_cont = {
.interrupt = empty,
.redo = process_fd_request,
.error = empty,
- .done = (done_f) empty
+ .done = (done_f)empty
};
-static int wait_til_done(void (*handler) (void), int interruptible)
+static int wait_til_done(void (*handler)(void), int interruptible)
{
int ret;
@@ -2049,7 +2057,6 @@ static int wait_til_done(void (*handler) (void), int interruptible)
break;
is_alive("wait_til_done");
-
schedule();
}
@@ -2141,6 +2148,7 @@ static void bad_flp_intr(void)
static void set_floppy(int drive)
{
int type = ITYPE(UDRS->fd_device);
+
if (type)
_floppy = floppy_type + type;
else
@@ -2169,11 +2177,14 @@ static void format_interrupt(void)
#define CT(x) ((x) | 0xc0)
static void setup_format_params(int track)
{
+ int n;
+ int il;
+ int count;
+ int head_shift;
+ int track_shift;
struct fparm {
unsigned char track, head, sect, size;
} *here = (struct fparm *)floppy_track_buffer;
- int il, n;
- int count, head_shift, track_shift;
raw_cmd = &default_raw_cmd;
raw_cmd->track = track;
@@ -2344,7 +2355,10 @@ static void request_done(int uptodate)
/* Interrupt handler evaluating the result of the r/w operation */
static void rw_interrupt(void)
{
- int nr_sectors, ssize, eoc, heads;
+ int eoc;
+ int ssize;
+ int heads;
+ int nr_sectors;
if (R_HEAD >= 2) {
/* some Toshiba floppy controllers occasionnally seem to
@@ -2476,7 +2490,8 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
{
int remaining; /* number of transferred 512-byte sectors */
struct bio_vec *bv;
- char *buffer, *dma_buffer;
+ char *buffer;
+ char *dma_buffer;
int size;
struct req_iterator iter;
@@ -2578,7 +2593,8 @@ static inline int check_dma_crossing(char *start,
*/
static void virtualdmabug_workaround(void)
{
- int hard_sectors, end_sector;
+ int hard_sectors;
+ int end_sector;
if (CT(COMMAND) == FD_WRITE) {
COMMAND &= ~0x80; /* switch off multiple track mode */
@@ -2610,7 +2626,10 @@ static void virtualdmabug_workaround(void)
static int make_raw_rw_request(void)
{
int aligned_sector_t;
- int max_sector, max_size, tracksize, ssize;
+ int max_sector;
+ int max_size;
+ int tracksize;
+ int ssize;
if (max_buffer_sectors == 0) {
printk("VFS: Block I/O scheduled on unopened device\n");
@@ -2777,8 +2796,8 @@ static int make_raw_rw_request(void)
indirect, direct, fsector_t);
return 0;
}
-/* check_dma_crossing(raw_cmd->kernel_data,
- raw_cmd->length,
+/* check_dma_crossing(raw_cmd->kernel_data,
+ raw_cmd->length,
"end of make_raw_request [1]");*/
virtualdmabug_workaround();
@@ -3011,6 +3030,7 @@ static struct cont_t poll_cont = {
static int poll_drive(int interruptible, int flag)
{
int ret;
+
/* no auto-sense, just clear dcl */
raw_cmd = &default_raw_cmd;
raw_cmd->flags = flag;
@@ -3173,7 +3193,8 @@ static inline int raw_cmd_copyout(int cmd, char __user *param,
static void raw_cmd_free(struct floppy_raw_cmd **ptr)
{
- struct floppy_raw_cmd *next, *this;
+ struct floppy_raw_cmd *next;
+ struct floppy_raw_cmd *this;
this = *ptr;
*ptr = NULL;
@@ -3245,8 +3266,10 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,
static int raw_cmd_ioctl(int cmd, void __user *param)
{
- int drive, ret, ret2;
struct floppy_raw_cmd *my_raw_cmd;
+ int drive;
+ int ret2;
+ int ret;
if (FDCS->rawcmd <= 1)
FDCS->rawcmd = 1;
@@ -3453,7 +3476,8 @@ static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
int drive = (long)inode->i_bdev->bd_disk->private_data;
- int i, type = ITYPE(UDRS->fd_device);
+ int type = ITYPE(UDRS->fd_device);
+ int i;
int ret;
int size;
union inparam {
@@ -3619,8 +3643,7 @@ static void __init config_types(void)
if (!UDP->cmos && FLOPPY1_TYPE)
UDP->cmos = FLOPPY1_TYPE;
- /* XXX */
- /* additional physical CMOS drive detection should go here */
+ /* FIXME: additional physical CMOS drive detection should go here */
for (drive = 0; drive < N_DRIVE; drive++) {
unsigned int type = UDP->cmos;
@@ -3903,13 +3926,13 @@ static int floppy_revalidate(struct gendisk *disk)
}
static struct block_device_operations floppy_fops = {
- .owner = THIS_MODULE,
- .open = floppy_open,
- .release = floppy_release,
- .ioctl = fd_ioctl,
- .getgeo = fd_getgeo,
- .media_changed = check_floppy_change,
- .revalidate_disk = floppy_revalidate,
+ .owner = THIS_MODULE,
+ .open = floppy_open,
+ .release = floppy_release,
+ .ioctl = fd_ioctl,
+ .getgeo = fd_getgeo,
+ .media_changed = check_floppy_change,
+ .revalidate_disk = floppy_revalidate,
};
/*
@@ -4428,8 +4451,8 @@ static int floppy_grab_irq_and_dma(void)
if (FDCS->address != -1)
fd_outb(FDCS->dor, FD_DOR);
/*
- * The driver will try and free resources and relies on us
- * to know if they were allocated or not.
+ * The driver will try and free resources and relies on us
+ * to know if they were allocated or not.
*/
fdc = 0;
irqdma_allocated = 1;
OpenPOWER on IntegriCloud