bcma: add serial console support

This adds support for serial console to bcma, when operating on an SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index acca327..47cce9d 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -106,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
 }
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+{
+	unsigned int irq;
+	u32 baud_base;
+	u32 i;
+	unsigned int ccrev = cc->core->id.rev;
+	struct bcma_serial_port *ports = cc->serial_ports;
+
+	if (ccrev >= 11 && ccrev != 15) {
+		/* Fixed ALP clock */
+		baud_base = bcma_pmu_alp_clock(cc);
+		if (ccrev >= 21) {
+			/* Turn off UART clock before switching clocksource. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       & ~BCMA_CC_CORECTL_UARTCLKEN);
+		}
+		/* Set the override bit so we don't divide it */
+		bcma_cc_write32(cc, BCMA_CC_CORECTL,
+			       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+			       | BCMA_CC_CORECTL_UARTCLK0);
+		if (ccrev >= 21) {
+			/* Re-enable the UART clock. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       | BCMA_CC_CORECTL_UARTCLKEN);
+		}
+	} else {
+		pr_err("serial not supported on this device ccrev: 0x%x\n",
+		       ccrev);
+		return;
+	}
+
+	irq = bcma_core_mips_irq(cc->core);
+
+	/* Determine the registers of the UARTs */
+	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+	for (i = 0; i < cc->nr_serial_ports; i++) {
+		ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
+				(i * 256);
+		ports[i].irq = irq;
+		ports[i].baud_base = baud_base;
+		ports[i].reg_shift = 0;
+	}
+}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */