summaryrefslogtreecommitdiffstats
path: root/drivers/base
diff options
context:
space:
mode:
authorRafael J. Wysocki <rjw@sisk.pl>2010-07-05 22:43:53 +0200
committerRafael J. Wysocki <rjw@sisk.pl>2010-07-19 01:58:48 +0200
commitc125e96f044427f38d106fab7bc5e4a5e6a18262 (patch)
treed9bbd40cc933fe522dbdf8ca2f7edf7b6f2f7ca4 /drivers/base
parentb14e033e17d0ea0ba12668d0d2f371cd31586994 (diff)
downloadop-kernel-dev-c125e96f044427f38d106fab7bc5e4a5e6a18262.zip
op-kernel-dev-c125e96f044427f38d106fab7bc5e4a5e6a18262.tar.gz
PM: Make it possible to avoid races between wakeup and system sleep
One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Diffstat (limited to 'drivers/base')
-rw-r--r--drivers/base/power/Makefile2
-rw-r--r--drivers/base/power/main.c1
-rw-r--r--drivers/base/power/sysfs.c15
-rw-r--r--drivers/base/power/wakeup.c229
4 files changed, 246 insertions, 1 deletions
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 89de753..cbccf9a 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_PM) += sysfs.o
-obj-$(CONFIG_PM_SLEEP) += main.o
+obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_OPS) += generic_ops.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 941fcb8..5419a49 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -59,6 +59,7 @@ void device_pm_init(struct device *dev)
{
dev->power.status = DPM_ON;
init_completion(&dev->power.completion);
+ dev->power.wakeup_count = 0;
pm_runtime_init(dev);
}
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a4c33bc..81d344e 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -73,6 +73,8 @@
* device are known to the PM core. However, for some devices this
* attribute is set to "enabled" by bus type code or device drivers and in
* that cases it should be safe to leave the default value.
+ *
+ * wakeup_count - Report the number of wakeup events related to the device
*/
static const char enabled[] = "enabled";
@@ -144,6 +146,16 @@ wake_store(struct device * dev, struct device_attribute *attr,
static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+#ifdef CONFIG_PM_SLEEP
+static ssize_t wakeup_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", dev->power.wakeup_count);
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+#endif
+
#ifdef CONFIG_PM_ADVANCED_DEBUG
#ifdef CONFIG_PM_RUNTIME
@@ -230,6 +242,9 @@ static struct attribute * power_attrs[] = {
&dev_attr_control.attr,
#endif
&dev_attr_wakeup.attr,
+#ifdef CONFIG_PM_SLEEP
+ &dev_attr_wakeup_count.attr,
+#endif
#ifdef CONFIG_PM_ADVANCED_DEBUG
&dev_attr_async.attr,
#ifdef CONFIG_PM_RUNTIME
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
new file mode 100644
index 0000000..2559907
--- /dev/null
+++ b/drivers/base/power/wakeup.c
@@ -0,0 +1,229 @@
+/*
+ * drivers/base/power/wakeup.c - System wakeup events framework
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/suspend.h>
+#include <linux/pm.h>
+
+/*
+ * If set, the suspend/hibernate code will abort transitions to a sleep state
+ * if wakeup events are registered during or immediately before the transition.
+ */
+bool events_check_enabled;
+
+/* The counter of registered wakeup events. */
+static unsigned long event_count;
+/* A preserved old value of event_count. */
+static unsigned long saved_event_count;
+/* The counter of wakeup events being processed. */
+static unsigned long events_in_progress;
+
+static DEFINE_SPINLOCK(events_lock);
+
+/*
+ * The functions below use the observation that each wakeup event starts a
+ * period in which the system should not be suspended. The moment this period
+ * will end depends on how the wakeup event is going to be processed after being
+ * detected and all of the possible cases can be divided into two distinct
+ * groups.
+ *
+ * First, a wakeup event may be detected by the same functional unit that will
+ * carry out the entire processing of it and possibly will pass it to user space
+ * for further processing. In that case the functional unit that has detected
+ * the event may later "close" the "no suspend" period associated with it
+ * directly as soon as it has been dealt with. The pair of pm_stay_awake() and
+ * pm_relax(), balanced with each other, is supposed to be used in such
+ * situations.
+ *
+ * Second, a wakeup event may be detected by one functional unit and processed
+ * by another one. In that case the unit that has detected it cannot really
+ * "close" the "no suspend" period associated with it, unless it knows in
+ * advance what's going to happen to the event during processing. This
+ * knowledge, however, may not be available to it, so it can simply specify time
+ * to wait before the system can be suspended and pass it as the second
+ * argument of pm_wakeup_event().
+ */
+
+/**
+ * pm_stay_awake - Notify the PM core that a wakeup event is being processed.
+ * @dev: Device the wakeup event is related to.
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) by incrementing the
+ * counter of wakeup events being processed. If @dev is not NULL, the counter
+ * of wakeup events related to @dev is incremented too.
+ *
+ * Call this function after detecting of a wakeup event if pm_relax() is going
+ * to be called directly after processing the event (and possibly passing it to
+ * user space for further processing).
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_stay_awake(struct device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (dev)
+ dev->power.wakeup_count++;
+
+ events_in_progress++;
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ *
+ * Notify the PM core that a wakeup event has been processed by decrementing
+ * the counter of wakeup events being processed and incrementing the counter
+ * of registered wakeup events.
+ *
+ * Call this function for wakeup events whose processing started with calling
+ * pm_stay_awake().
+ *
+ * It is safe to call it from interrupt context.
+ */
+void pm_relax(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (events_in_progress) {
+ events_in_progress--;
+ event_count++;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_work_fn - Deferred closing of a wakeup event.
+ *
+ * Execute pm_relax() for a wakeup event detected in the past and free the
+ * work item object used for queuing up the work.
+ */
+static void pm_wakeup_work_fn(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+
+ pm_relax();
+ kfree(dwork);
+}
+
+/**
+ * pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @dev: Device the wakeup event is related to.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) that will take
+ * approximately @msec milliseconds to be processed by the kernel. Increment
+ * the counter of wakeup events being processed and queue up a work item
+ * that will execute pm_relax() for the event after @msec milliseconds. If @dev
+ * is not NULL, the counter of wakeup events related to @dev is incremented too.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+ unsigned long flags;
+ struct delayed_work *dwork;
+
+ dwork = msec ? kzalloc(sizeof(*dwork), GFP_ATOMIC) : NULL;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (dev)
+ dev->power.wakeup_count++;
+
+ if (dwork) {
+ INIT_DELAYED_WORK(dwork, pm_wakeup_work_fn);
+ schedule_delayed_work(dwork, msecs_to_jiffies(msec));
+
+ events_in_progress++;
+ } else {
+ event_count++;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_check_wakeup_events - Check for new wakeup events.
+ *
+ * Compare the current number of registered wakeup events with its preserved
+ * value from the past to check if new wakeup events have been registered since
+ * the old value was stored. Check if the current number of wakeup events being
+ * processed is zero.
+ */
+bool pm_check_wakeup_events(void)
+{
+ unsigned long flags;
+ bool ret = true;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (events_check_enabled) {
+ ret = (event_count == saved_event_count) && !events_in_progress;
+ events_check_enabled = ret;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+ return ret;
+}
+
+/**
+ * pm_get_wakeup_count - Read the number of registered wakeup events.
+ * @count: Address to store the value at.
+ *
+ * Store the number of registered wakeup events at the address in @count. Block
+ * if the current number of wakeup events being processed is nonzero.
+ *
+ * Return false if the wait for the number of wakeup events being processed to
+ * drop down to zero has been interrupted by a signal (and the current number
+ * of wakeup events being processed is still nonzero). Otherwise return true.
+ */
+bool pm_get_wakeup_count(unsigned long *count)
+{
+ bool ret;
+
+ spin_lock_irq(&events_lock);
+ if (capable(CAP_SYS_ADMIN))
+ events_check_enabled = false;
+
+ while (events_in_progress && !signal_pending(current)) {
+ spin_unlock_irq(&events_lock);
+
+ schedule_timeout_interruptible(msecs_to_jiffies(100));
+
+ spin_lock_irq(&events_lock);
+ }
+ *count = event_count;
+ ret = !events_in_progress;
+ spin_unlock_irq(&events_lock);
+ return ret;
+}
+
+/**
+ * pm_save_wakeup_count - Save the current number of registered wakeup events.
+ * @count: Value to compare with the current number of registered wakeup events.
+ *
+ * If @count is equal to the current number of registered wakeup events and the
+ * current number of wakeup events being processed is zero, store @count as the
+ * old number of registered wakeup events to be used by pm_check_wakeup_events()
+ * and return true. Otherwise return false.
+ */
+bool pm_save_wakeup_count(unsigned long count)
+{
+ bool ret = false;
+
+ spin_lock_irq(&events_lock);
+ if (count == event_count && !events_in_progress) {
+ saved_event_count = count;
+ events_check_enabled = true;
+ ret = true;
+ }
+ spin_unlock_irq(&events_lock);
+ return ret;
+}
OpenPOWER on IntegriCloud