Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2770 insertions, 0 deletions

diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
new file mode 100644
index 0000000..ffe3afa
--- /dev/null
+++ b/drivers/atm/lanai.c
@@ -0,0 +1,2770 @@
+/* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ * This driver supports ATM cards based on the Efficient "Lanai"
+ * chipset such as the Speedstream 3010 and the ENI-25p.  The
+ * Speedstream 3060 is currently not supported since we don't
+ * have the code to drive the on-board Alcatel DSL chipset (yet).
+ *
+ * Thanks to Efficient for supporting this project with hardware,
+ * documentation, and by answering my questions.
+ *
+ * Things not working yet:
+ *
+ * o  We don't support the Speedstream 3060 yet - this card has
+ *    an on-board DSL modem chip by Alcatel and the driver will
+ *    need some extra code added to handle it
+ *
+ * o  Note that due to limitations of the Lanai only one VCC can be
+ *    in CBR at once
+ *
+ * o We don't currently parse the EEPROM at all.  The code is all
+ *   there as per the spec, but it doesn't actually work.  I think
+ *   there may be some issues with the docs.  Anyway, do NOT
+ *   enable it yet - bugs in that code may actually damage your
+ *   hardware!  Because of this you should hardware an ESI before
+ *   trying to use this in a LANE or MPOA environment.
+ *
+ * o  AAL0 is stubbed in but the actual rx/tx path isn't written yet:
+ *	vcc_tx_aal0() needs to send or queue a SKB
+ *	vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs
+ *	vcc_rx_aal0() needs to handle AAL0 interrupts
+ *    This isn't too much work - I just wanted to get other things
+ *    done first.
+ *
+ * o  lanai_change_qos() isn't written yet
+ *
+ * o  There aren't any ioctl's yet -- I'd like to eventually support
+ *    setting loopback and LED modes that way.  (see lanai_ioctl)
+ *
+ * o  If the segmentation engine or DMA gets shut down we should restart
+ *    card as per section 17.0i.  (see lanai_reset)
+ *
+ * o setsockopt(SO_CIRANGE) isn't done (although despite what the
+ *   API says it isn't exactly commonly implemented)
+ */
+
+/* Version history:
+ *   v.1.00 -- 26-JUL-2003 -- PCI/DMA updates
+ *   v.0.02 -- 11-JAN-2000 -- Endian fixes
+ *   v.0.01 -- 30-NOV-1999 -- Initial release
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/atmdev.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+/* -------------------- TUNABLE PARAMATERS: */
+
+/*
+ * Maximum number of VCIs per card.  Setting it lower could theoretically
+ * save some memory, but since we allocate our vcc list with get_free_pages,
+ * it's not really likely for most architectures
+ */
+#define NUM_VCI			(1024)
+
+/*
+ * Enable extra debugging
+ */
+#define DEBUG
+/*
+ * Debug _all_ register operations with card, except the memory test.
+ * Also disables the timed poll to prevent extra chattiness.  This
+ * isn't for normal use
+ */
+#undef DEBUG_RW
+
+/*
+ * The programming guide specifies a full test of the on-board SRAM
+ * at initialization time.  Undefine to remove this
+ */
+#define FULL_MEMORY_TEST
+
+/*
+ * This is the number of (4 byte) service entries that we will
+ * try to allocate at startup.  Note that we will end up with
+ * one PAGE_SIZE's worth regardless of what this is set to
+ */
+#define SERVICE_ENTRIES		(1024)
+/* TODO: make above a module load-time option */
+
+/*
+ * We normally read the onboard EEPROM in order to discover our MAC
+ * address.  Undefine to _not_ do this
+ */
+/* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */
+/* TODO: make above a module load-time option (also) */
+
+/*
+ * Depth of TX fifo (in 128 byte units; range 2-31)
+ * Smaller numbers are better for network latency
+ * Larger numbers are better for PCI latency
+ * I'm really sure where the best tradeoff is, but the BSD driver uses
+ * 7 and it seems to work ok.
+ */
+#define TX_FIFO_DEPTH		(7)
+/* TODO: make above a module load-time option */
+
+/*
+ * How often (in jiffies) we will try to unstick stuck connections -
+ * shouldn't need to happen much
+ */
+#define LANAI_POLL_PERIOD	(10*HZ)
+/* TODO: make above a module load-time option */
+
+/*
+ * When allocating an AAL5 receiving buffer, try to make it at least
+ * large enough to hold this many max_sdu sized PDUs
+ */
+#define AAL5_RX_MULTIPLIER	(3)
+/* TODO: make above a module load-time option */
+
+/*
+ * Same for transmitting buffer
+ */
+#define AAL5_TX_MULTIPLIER	(3)
+/* TODO: make above a module load-time option */
+
+/*
+ * When allocating an AAL0 transmiting buffer, how many cells should fit.
+ * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't
+ * really critical
+ */
+#define AAL0_TX_MULTIPLIER	(40)
+/* TODO: make above a module load-time option */
+
+/*
+ * How large should we make the AAL0 receiving buffer.  Remember that this
+ * is shared between all AAL0 VC's
+ */
+#define AAL0_RX_BUFFER_SIZE	(PAGE_SIZE)
+/* TODO: make above a module load-time option */
+
+/*
+ * Should we use Lanai's "powerdown" feature when no vcc's are bound?
+ */
+/* #define USE_POWERDOWN */
+/* TODO: make above a module load-time option (also) */
+
+/* -------------------- DEBUGGING AIDS: */
+
+#define DEV_LABEL "lanai"
+
+#ifdef DEBUG
+
+#define DPRINTK(format, args...) \
+	printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
+#define APRINTK(truth, format, args...) \
+	do { \
+		if (unlikely(!(truth))) \
+			printk(KERN_ERR DEV_LABEL ": " format, ##args); \
+	} while (0)
+
+#else /* !DEBUG */
+
+#define DPRINTK(format, args...)
+#define APRINTK(truth, format, args...)
+
+#endif /* DEBUG */
+
+#ifdef DEBUG_RW
+#define RWDEBUG(format, args...) \
+	printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
+#else /* !DEBUG_RW */
+#define RWDEBUG(format, args...)
+#endif
+
+/* -------------------- DATA DEFINITIONS: */
+
+#define LANAI_MAPPING_SIZE	(0x40000)
+#define LANAI_EEPROM_SIZE	(128)
+
+typedef int vci_t;
+typedef void __iomem *bus_addr_t;
+
+/* DMA buffer in host memory for TX, RX, or service list. */
+struct lanai_buffer {
+	u32 *start;	/* From get_free_pages */
+	u32 *end;	/* One past last byte */
+	u32 *ptr;	/* Pointer to current host location */
+	dma_addr_t dmaaddr;
+};
+
+struct lanai_vcc_stats {
+	unsigned rx_nomem;
+	union {
+		struct {
+			unsigned rx_badlen;
+			unsigned service_trash;
+			unsigned service_stream;
+			unsigned service_rxcrc;
+		} aal5;
+		struct {
+		} aal0;
+	} x;
+};
+
+struct lanai_dev;			/* Forward declaration */
+
+/*
+ * This is the card-specific per-vcc data.  Note that unlike some other
+ * drivers there is NOT a 1-to-1 correspondance between these and
+ * atm_vcc's - each one of these represents an actual 2-way vcc, but
+ * an atm_vcc can be 1-way and share with a 1-way vcc in the other
+ * direction.  To make it weirder, there can even be 0-way vccs
+ * bound to us, waiting to do a change_qos
+ */
+struct lanai_vcc {
+	bus_addr_t vbase;		/* Base of VCC's registers */
+	struct lanai_vcc_stats stats;
+	int nref;			/* # of atm_vcc's who reference us */
+	vci_t vci;
+	struct {
+		struct lanai_buffer buf;
+		struct atm_vcc *atmvcc;	/* atm_vcc who is receiver */
+	} rx;
+	struct {
+		struct lanai_buffer buf;
+		struct atm_vcc *atmvcc;	/* atm_vcc who is transmitter */
+		int endptr;		/* last endptr from service entry */
+		struct sk_buff_head backlog;
+		void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int);
+	} tx;
+};
+
+enum lanai_type {
+	lanai2	= PCI_VENDOR_ID_EF_ATM_LANAI2,
+	lanaihb	= PCI_VENDOR_ID_EF_ATM_LANAIHB
+};
+
+struct lanai_dev_stats {
+	unsigned ovfl_trash;	/* # of cells dropped - buffer overflow */
+	unsigned vci_trash;	/* # of cells dropped - closed vci */
+	unsigned hec_err;	/* # of cells dropped - bad HEC */
+	unsigned atm_ovfl;	/* # of cells dropped - rx fifo overflow */
+	unsigned pcierr_parity_detect;
+	unsigned pcierr_serr_set;
+	unsigned pcierr_master_abort;
+	unsigned pcierr_m_target_abort;
+	unsigned pcierr_s_target_abort;
+	unsigned pcierr_master_parity;
+	unsigned service_notx;
+	unsigned service_norx;
+	unsigned service_rxnotaal5;
+	unsigned dma_reenable;
+	unsigned card_reset;
+};
+
+struct lanai_dev {
+	bus_addr_t base;
+	struct lanai_dev_stats stats;
+	struct lanai_buffer service;
+	struct lanai_vcc **vccs;
+#ifdef USE_POWERDOWN
+	int nbound;			/* number of bound vccs */
+#endif
+	enum lanai_type type;
+	vci_t num_vci;			/* Currently just NUM_VCI */
+	u8 eeprom[LANAI_EEPROM_SIZE];
+	u32 serialno, magicno;
+	struct pci_dev *pci;
+	DECLARE_BITMAP(backlog_vccs, NUM_VCI);   /* VCCs with tx backlog */
+	DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */
+	struct timer_list timer;
+	int naal0;
+	struct lanai_buffer aal0buf;	/* AAL0 RX buffers */
+	u32 conf1, conf2;		/* CONFIG[12] registers */
+	u32 status;			/* STATUS register */
+	spinlock_t endtxlock;
+	spinlock_t servicelock;
+	struct atm_vcc *cbrvcc;
+	int number;
+	int board_rev;
+	u8 pci_revision;
+/* TODO - look at race conditions with maintence of conf1/conf2 */
+/* TODO - transmit locking: should we use _irq not _irqsave? */
+/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
+};
+
+/*
+ * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready)
+ * This function iterates one of these, calling a given function for each
+ * vci with their bit set
+ */
+static void vci_bitfield_iterate(struct lanai_dev *lanai,
+	/*const*/ unsigned long *lp,
+	void (*func)(struct lanai_dev *,vci_t vci))
+{
+	vci_t vci = find_first_bit(lp, NUM_VCI);
+	while (vci < NUM_VCI) {
+		func(lanai, vci);
+		vci = find_next_bit(lp, NUM_VCI, vci + 1);
+	}
+}
+
+/* -------------------- BUFFER  UTILITIES: */
+
+/*
+ * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes -
+ * usually any page allocation will do.  Just to be safe in case
+ * PAGE_SIZE is insanely tiny, though...
+ */
+#define LANAI_PAGE_SIZE   ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024)
+
+/*
+ * Allocate a buffer in host RAM for service list, RX, or TX
+ * Returns buf->start==NULL if no memory
+ * Note that the size will be rounded up 2^n bytes, and
+ * if we can't allocate that we'll settle for something smaller
+ * until minbytes
+ */
+static void lanai_buf_allocate(struct lanai_buffer *buf,
+	size_t bytes, size_t minbytes, struct pci_dev *pci)
+{
+	int size;
+
+	if (bytes > (128 * 1024))	/* max lanai buffer size */
+		bytes = 128 * 1024;
+	for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2)
+		;
+	if (minbytes < LANAI_PAGE_SIZE)
+		minbytes = LANAI_PAGE_SIZE;
+	do {
+		/*
+		 * Technically we could use non-consistent mappings for
+		 * everything, but the way the lanai uses DMA memory would
+		 * make that a terrific pain.  This is much simpler.
+		 */
+		buf->start = pci_alloc_consistent(pci, size, &buf->dmaaddr);
+		if (buf->start != NULL) {	/* Success */
+			/* Lanai requires 256-byte alignment of DMA bufs */
+			APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0,
+			    "bad dmaaddr: 0x%lx\n",
+			    (unsigned long) buf->dmaaddr);
+			buf->ptr = buf->start;
+			buf->end = (u32 *)
+			    (&((unsigned char *) buf->start)[size]);
+			memset(buf->start, 0, size);
+			break;
+		}
+		size /= 2;
+	} while (size >= minbytes);
+}
+
+/* size of buffer in bytes */
+static inline size_t lanai_buf_size(const struct lanai_buffer *buf)
+{
+	return ((unsigned long) buf->end) - ((unsigned long) buf->start);
+}
+
+static void lanai_buf_deallocate(struct lanai_buffer *buf,
+	struct pci_dev *pci)
+{
+	if (buf->start != NULL) {
+		pci_free_consistent(pci, lanai_buf_size(buf),
+		    buf->start, buf->dmaaddr);
+		buf->start = buf->end = buf->ptr = NULL;
+	}
+}
+
+/* size of buffer as "card order" (0=1k .. 7=128k) */
+static int lanai_buf_size_cardorder(const struct lanai_buffer *buf)
+{
+	int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10);
+
+	/* This can only happen if PAGE_SIZE is gigantic, but just in case */
+	if (order > 7)
+		order = 7;
+	return order;
+}
+
+/* -------------------- PORT I/O UTILITIES: */
+
+/* Registers (and their bit-fields) */
+enum lanai_register {
+	Reset_Reg		= 0x00,	/* Reset; read for chip type; bits: */
+#define   RESET_GET_BOARD_REV(x)    (((x)>> 0)&0x03)	/* Board revision */
+#define   RESET_GET_BOARD_ID(x)	    (((x)>> 2)&0x03)	/* Board ID */
+#define     BOARD_ID_LANAI256		(0)	/* 25.6M adapter card */
+	Endian_Reg		= 0x04,	/* Endian setting */
+	IntStatus_Reg		= 0x08,	/* Interrupt status */
+	IntStatusMasked_Reg	= 0x0C,	/* Interrupt status (masked) */
+	IntAck_Reg		= 0x10,	/* Interrupt acknowledge */
+	IntAckMasked_Reg	= 0x14,	/* Interrupt acknowledge (masked) */
+	IntStatusSet_Reg	= 0x18,	/* Get status + enable/disable */
+	IntStatusSetMasked_Reg	= 0x1C,	/* Get status + en/di (masked) */
+	IntControlEna_Reg	= 0x20,	/* Interrupt control enable */
+	IntControlDis_Reg	= 0x24,	/* Interrupt control disable */
+	Status_Reg		= 0x28,	/* Status */
+#define   STATUS_PROMDATA	 (0x00000001)	/* PROM_DATA pin */
+#define   STATUS_WAITING	 (0x00000002)	/* Interrupt being delayed */
+#define	  STATUS_SOOL		 (0x00000004)	/* SOOL alarm */
+#define   STATUS_LOCD		 (0x00000008)	/* LOCD alarm */
+#define	  STATUS_LED		 (0x00000010)	/* LED (HAPPI) output */
+#define   STATUS_GPIN		 (0x00000020)	/* GPIN pin */
+#define   STATUS_BUTTBUSY	 (0x00000040)	/* Butt register is pending */
+	Config1_Reg		= 0x2C,	/* Config word 1; bits: */
+#define   CONFIG1_PROMDATA	 (0x00000001)	/* PROM_DATA pin */
+#define   CONFIG1_PROMCLK	 (0x00000002)	/* PROM_CLK pin */
+#define   CONFIG1_SET_READMODE(x) ((x)*0x004)	/* PCI BM reads; values: */
+#define     READMODE_PLAIN	    (0)		/*   Plain memory read */
+#define     READMODE_LINE	    (2)		/*   Memory read line */
+#define     READMODE_MULTIPLE	    (3)		/*   Memory read multiple */
+#define   CONFIG1_DMA_ENABLE	 (0x00000010)	/* Turn on DMA */
+#define   CONFIG1_POWERDOWN	 (0x00000020)	/* Turn off clocks */
+#define   CONFIG1_SET_LOOPMODE(x) ((x)*0x080)	/* Clock&loop mode; values: */
+#define     LOOPMODE_NORMAL	    (0)		/*   Normal - no loop */
+#define     LOOPMODE_TIME	    (1)
+#define     LOOPMODE_DIAG	    (2)
+#define     LOOPMODE_LINE	    (3)
+#define   CONFIG1_MASK_LOOPMODE  (0x00000180)
+#define   CONFIG1_SET_LEDMODE(x) ((x)*0x0200)	/* Mode of LED; values: */
+#define     LEDMODE_NOT_SOOL	    (0)		/*   !SOOL */
+#define	    LEDMODE_OFF		    (1)		/*   0     */
+#define	    LEDMODE_ON		    (2)		/*   1     */
+#define	    LEDMODE_NOT_LOCD	    (3)		/*   !LOCD */
+#define	    LEDMORE_GPIN	    (4)		/*   GPIN  */
+#define     LEDMODE_NOT_GPIN	    (7)		/*   !GPIN */
+#define   CONFIG1_MASK_LEDMODE	 (0x00000E00)
+#define   CONFIG1_GPOUT1	 (0x00001000)	/* Toggle for reset */
+#define   CONFIG1_GPOUT2	 (0x00002000)	/* Loopback PHY */
+#define   CONFIG1_GPOUT3	 (0x00004000)	/* Loopback lanai */
+	Config2_Reg		= 0x30,	/* Config word 2; bits: */
+#define   CONFIG2_HOWMANY	 (0x00000001)	/* >512 VCIs? */
+#define   CONFIG2_PTI7_MODE	 (0x00000002)	/* Make PTI=7 RM, not OAM */
+#define   CONFIG2_VPI_CHK_DIS	 (0x00000004)	/* Ignore RX VPI value */
+#define   CONFIG2_HEC_DROP	 (0x00000008)	/* Drop cells w/ HEC errors */
+#define   CONFIG2_VCI0_NORMAL	 (0x00000010)	/* Treat VCI=0 normally */
+#define   CONFIG2_CBR_ENABLE	 (0x00000020)	/* Deal with CBR traffic */
+#define   CONFIG2_TRASH_ALL	 (0x00000040)	/* Trashing incoming cells */
+#define   CONFIG2_TX_DISABLE	 (0x00000080)	/* Trashing outgoing cells */
+#define   CONFIG2_SET_TRASH	 (0x00000100)	/* Turn trashing on */
+	Statistics_Reg		= 0x34,	/* Statistics; bits: */
+#define   STATS_GET_FIFO_OVFL(x)    (((x)>> 0)&0xFF)	/* FIFO overflowed */
+#define   STATS_GET_HEC_ERR(x)      (((x)>> 8)&0xFF)	/* HEC was bad */
+#define   STATS_GET_BAD_VCI(x)      (((x)>>16)&0xFF)	/* VCI not open */
+#define   STATS_GET_BUF_OVFL(x)     (((x)>>24)&0xFF)	/* VCC buffer full */
+	ServiceStuff_Reg	= 0x38,	/* Service stuff; bits: */
+#define   SSTUFF_SET_SIZE(x) ((x)*0x20000000)	/* size of service buffer */
+#define   SSTUFF_SET_ADDR(x)	    ((x)>>8)	/* set address of buffer */
+	ServWrite_Reg		= 0x3C,	/* ServWrite Pointer */
+	ServRead_Reg		= 0x40,	/* ServRead Pointer */
+	TxDepth_Reg		= 0x44,	/* FIFO Transmit Depth */
+	Butt_Reg		= 0x48,	/* Butt register */
+	CBR_ICG_Reg		= 0x50,
+	CBR_PTR_Reg		= 0x54,
+	PingCount_Reg		= 0x58,	/* Ping count */
+	DMA_Addr_Reg		= 0x5C	/* DMA address */
+};
+
+static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
+	enum lanai_register reg)
+{
+	return lanai->base + reg;
+}
+
+static inline u32 reg_read(const struct lanai_dev *lanai,
+	enum lanai_register reg)
+{
+	u32 t;
+	t = readl(reg_addr(lanai, reg));
+	RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base,
+	    (int) reg, t);
+	return t;
+}
+
+static inline void reg_write(const struct lanai_dev *lanai, u32 val,
+	enum lanai_register reg)
+{
+	RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base,
+	    (int) reg, val);
+	writel(val, reg_addr(lanai, reg));
+}
+
+static inline void conf1_write(const struct lanai_dev *lanai)
+{
+	reg_write(lanai, lanai->conf1, Config1_Reg);
+}
+
+static inline void conf2_write(const struct lanai_dev *lanai)
+{
+	reg_write(lanai, lanai->conf2, Config2_Reg);
+}
+
+/* Same as conf2_write(), but defers I/O if we're powered down */
+static inline void conf2_write_if_powerup(const struct lanai_dev *lanai)
+{
+#ifdef USE_POWERDOWN
+	if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0))
+		return;
+#endif /* USE_POWERDOWN */
+	conf2_write(lanai);
+}
+
+static inline void reset_board(const struct lanai_dev *lanai)
+{
+	DPRINTK("about to reset board\n");
+	reg_write(lanai, 0, Reset_Reg);
+	/*
+	 * If we don't delay a little while here then we can end up
+	 * leaving the card in a VERY weird state and lock up the
+	 * PCI bus.  This isn't documented anywhere but I've convinced
+	 * myself after a lot of painful experimentation
+	 */
+	udelay(5);
+}
+
+/* -------------------- CARD SRAM UTILITIES: */
+
+/* The SRAM is mapped into normal PCI memory space - the only catch is
+ * that it is only 16-bits wide but must be accessed as 32-bit.  The
+ * 16 high bits will be zero.  We don't hide this, since they get
+ * programmed mostly like discrete registers anyway
+ */
+#define SRAM_START (0x20000)
+#define SRAM_BYTES (0x20000)	/* Again, half don't really exist */
+
+static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset)
+{
+	return lanai->base + SRAM_START + offset;
+}
+
+static inline u32 sram_read(const struct lanai_dev *lanai, int offset)
+{
+	return readl(sram_addr(lanai, offset));
+}
+
+static inline void sram_write(const struct lanai_dev *lanai,
+	u32 val, int offset)
+{
+	writel(val, sram_addr(lanai, offset));
+}
+
+static int __init sram_test_word(
+	const struct lanai_dev *lanai, int offset, u32 pattern)
+{
+	u32 readback;
+	sram_write(lanai, pattern, offset);
+	readback = sram_read(lanai, offset);
+	if (likely(readback == pattern))
+		return 0;
+	printk(KERN_ERR DEV_LABEL
+	    "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n",
+	    lanai->number, offset,
+	    (unsigned int) pattern, (unsigned int) readback);
+	return -EIO;
+}
+
+static int __devinit sram_test_pass(const struct lanai_dev *lanai, u32 pattern)
+{
+	int offset, result = 0;
+	for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4)
+		result = sram_test_word(lanai, offset, pattern);
+	return result;
+}
+
+static int __devinit sram_test_and_clear(const struct lanai_dev *lanai)
+{
+#ifdef FULL_MEMORY_TEST
+	int result;
+	DPRINTK("testing SRAM\n");
+	if ((result = sram_test_pass(lanai, 0x5555)) != 0)
+		return result;
+	if ((result = sram_test_pass(lanai, 0xAAAA)) != 0)
+		return result;
+#endif
+	DPRINTK("clearing SRAM\n");
+	return sram_test_pass(lanai, 0x0000);
+}
+
+/* -------------------- CARD-BASED VCC TABLE UTILITIES: */
+
+/* vcc table */
+enum lanai_vcc_offset {
+	vcc_rxaddr1		= 0x00,	/* Location1, plus bits: */
+#define   RXADDR1_SET_SIZE(x) ((x)*0x0000100)	/* size of RX buffer */
+#define   RXADDR1_SET_RMMODE(x) ((x)*0x00800)	/* RM cell action; values: */
+#define     RMMODE_TRASH	  (0)		/*   discard */
+#define     RMMODE_PRESERVE	  (1)		/*   input as AAL0 */
+#define     RMMODE_PIPE		  (2)		/*   pipe to coscheduler */
+#define     RMMODE_PIPEALL	  (3)		/*   pipe non-RM too */
+#define   RXADDR1_OAM_PRESERVE	 (0x00002000)	/* Input OAM cells as AAL0 */
+#define   RXADDR1_SET_MODE(x) ((x)*0x0004000)	/* Reassembly mode */
+#define     RXMODE_TRASH	  (0)		/*   discard */
+#define     RXMODE_AAL0		  (1)		/*   non-AAL5 mode */
+#define     RXMODE_AAL5		  (2)		/*   AAL5, intr. each PDU */
+#define     RXMODE_AAL5_STREAM	  (3)		/*   AAL5 w/o per-PDU intr */
+	vcc_rxaddr2		= 0x04,	/* Location2 */
+	vcc_rxcrc1		= 0x08,	/* RX CRC claculation space */
+	vcc_rxcrc2		= 0x0C,
+	vcc_rxwriteptr		= 0x10, /* RX writeptr, plus bits: */
+#define   RXWRITEPTR_LASTEFCI	 (0x00002000)	/* Last PDU had EFCI bit */
+#define   RXWRITEPTR_DROPPING	 (0x00004000)	/* Had error, dropping */
+#define   RXWRITEPTR_TRASHING	 (0x00008000)	/* Trashing */
+	vcc_rxbufstart		= 0x14,	/* RX bufstart, plus bits: */
+#define   RXBUFSTART_CLP	 (0x00004000)
+#define   RXBUFSTART_CI		 (0x00008000)
+	vcc_rxreadptr		= 0x18,	/* RX readptr */
+	vcc_txicg		= 0x1C, /* TX ICG */
+	vcc_txaddr1		= 0x20,	/* Location1, plus bits: */
+#define   TXADDR1_SET_SIZE(x) ((x)*0x0000100)	/* size of TX buffer */
+#define   TXADDR1_ABR		 (0x00008000)	/* use ABR (doesn't work) */
+	vcc_txaddr2		= 0x24,	/* Location2 */
+	vcc_txcrc1		= 0x28,	/* TX CRC claculation space */
+	vcc_txcrc2		= 0x2C,
+	vcc_txreadptr		= 0x30, /* TX Readptr, plus bits: */
+#define   TXREADPTR_GET_PTR(x) ((x)&0x01FFF)
+#define   TXREADPTR_MASK_DELTA	(0x0000E000)	/* ? */
+	vcc_txendptr		= 0x34, /* TX Endptr, plus bits: */
+#define   TXENDPTR_CLP		(0x00002000)
+#define   TXENDPTR_MASK_PDUMODE	(0x0000C000)	/* PDU mode; values: */
+#define     PDUMODE_AAL0	 (0*0x04000)
+#define     PDUMODE_AAL5	 (2*0x04000)
+#define     PDUMODE_AAL5STREAM	 (3*0x04000)
+	vcc_txwriteptr		= 0x38,	/* TX Writeptr */
+#define   TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF)
+	vcc_txcbr_next		= 0x3C	/* # of next CBR VCI in ring */
+#define   TXCBR_NEXT_BOZO	(0x00008000)	/* "bozo bit" */
+};
+
+#define CARDVCC_SIZE	(0x40)
+
+static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai,
+	vci_t vci)
+{
+	return sram_addr(lanai, vci * CARDVCC_SIZE);
+}
+
+static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
+	enum lanai_vcc_offset offset)
+{
+	u32 val;
+	APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n");
+	val= readl(lvcc->vbase + offset);
+	RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
+	    lvcc->vci, (int) offset, val);
+	return val;
+}
+
+static inline void cardvcc_write(const struct lanai_vcc *lvcc,
+	u32 val, enum lanai_vcc_offset offset)
+{
+	APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n");
+	APRINTK((val & ~0xFFFF) == 0,
+	    "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n",
+	    (unsigned int) val, lvcc->vci, (unsigned int) offset);
+	RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
+	    lvcc->vci, (unsigned int) offset, (unsigned int) val);
+	writel(val, lvcc->vbase + offset);
+}
+
+/* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */
+
+/* How many bytes will an AAL5 PDU take to transmit - remember that:
+ *   o  we need to add 8 bytes for length, CPI, UU, and CRC
+ *   o  we need to round up to 48 bytes for cells
+ */
+static inline int aal5_size(int size)
+{
+	int cells = (size + 8 + 47) / 48;
+	return cells * 48;
+}
+
+/* How many bytes can we send if we have "space" space, assuming we have
+ * to send full cells
+ */
+static inline int aal5_spacefor(int space)
+{
+	int cells = space / 48;
+	return cells * 48;
+}
+
+/* -------------------- FREE AN ATM SKB: */
+
+static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb)
+{
+	if (atmvcc->pop != NULL)
+		atmvcc->pop(atmvcc, skb);
+	else
+		dev_kfree_skb_any(skb);
+}
+
+/* -------------------- TURN VCCS ON AND OFF: */
+
+static void host_vcc_start_rx(const struct lanai_vcc *lvcc)
+{
+	u32 addr1;
+	if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) {
+		dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr;
+		cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1);
+		cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2);
+		cardvcc_write(lvcc, 0, vcc_rxwriteptr);
+		cardvcc_write(lvcc, 0, vcc_rxbufstart);
+		cardvcc_write(lvcc, 0, vcc_rxreadptr);
+		cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2);
+		addr1 = ((dmaaddr >> 8) & 0xFF) |
+		    RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))|
+		    RXADDR1_SET_RMMODE(RMMODE_TRASH) |	/* ??? */
+		 /* RXADDR1_OAM_PRESERVE |	--- no OAM support yet */
+		    RXADDR1_SET_MODE(RXMODE_AAL5);
+	} else
+		addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */
+		    RXADDR1_OAM_PRESERVE |		      /* ??? */
+		    RXADDR1_SET_MODE(RXMODE_AAL0);
+	/* This one must be last! */
+	cardvcc_write(lvcc, addr1, vcc_rxaddr1);
+}
+
+static void host_vcc_start_tx(const struct lanai_vcc *lvcc)
+{
+	dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr;
+	cardvcc_write(lvcc, 0, vcc_txicg);
+	cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1);
+	cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2);
+	cardvcc_write(lvcc, 0, vcc_txreadptr);
+	cardvcc_write(lvcc, 0, vcc_txendptr);
+	cardvcc_write(lvcc, 0, vcc_txwriteptr);
+	cardvcc_write(lvcc,
+		(lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ?
+		TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next);
+	cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2);
+	cardvcc_write(lvcc,
+	    ((dmaaddr >> 8) & 0xFF) |
+	    TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)),
+	    vcc_txaddr1);
+}
+
+/* Shutdown receiving on card */
+static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc)
+{
+	if (lvcc->vbase == NULL)	/* We were never bound to a VCI */
+		return;
+	/* 15.1.1 - set to trashing, wait one cell time (15us) */
+	cardvcc_write(lvcc,
+	    RXADDR1_SET_RMMODE(RMMODE_TRASH) |
+	    RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1);
+	udelay(15);
+	/* 15.1.2 - clear rest of entries */
+	cardvcc_write(lvcc, 0, vcc_rxaddr2);
+	cardvcc_write(lvcc, 0, vcc_rxcrc1);
+	cardvcc_write(lvcc, 0, vcc_rxcrc2);
+	cardvcc_write(lvcc, 0, vcc_rxwriteptr);
+	cardvcc_write(lvcc, 0, vcc_rxbufstart);
+	cardvcc_write(lvcc, 0, vcc_rxreadptr);
+}
+
+/* Shutdown transmitting on card.
+ * Unfortunately the lanai needs us to wait until all the data
+ * drains out of the buffer before we can dealloc it, so this
+ * can take awhile -- up to 370ms for a full 128KB buffer
+ * assuming everone else is quiet.  In theory the time is
+ * boundless if there's a CBR VCC holding things up.
+ */
+static void lanai_shutdown_tx_vci(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc)
+{
+	struct sk_buff *skb;
+	unsigned long flags, timeout;
+	int read, write, lastread = -1;
+	APRINTK(!in_interrupt(),
+	    "lanai_shutdown_tx_vci called w/o process context!\n");
+	if (lvcc->vbase == NULL)	/* We were never bound to a VCI */
+		return;
+	/* 15.2.1 - wait for queue to drain */
+	while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL)
+		lanai_free_skb(lvcc->tx.atmvcc, skb);
+	read_lock_irqsave(&vcc_sklist_lock, flags);
+	__clear_bit(lvcc->vci, lanai->backlog_vccs);
+	read_unlock_irqrestore(&vcc_sklist_lock, flags);
+	/*
+	 * We need to wait for the VCC to drain but don't wait forever.  We
+	 * give each 1K of buffer size 1/128th of a second to clear out.
+	 * TODO: maybe disable CBR if we're about to timeout?
+	 */
+	timeout = jiffies +
+	    (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7);
+	write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr));
+	for (;;) {
+		read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
+		if (read == write &&	   /* Is TX buffer empty? */
+		    (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR ||
+		    (cardvcc_read(lvcc, vcc_txcbr_next) &
+		    TXCBR_NEXT_BOZO) == 0))
+			break;
+		if (read != lastread) {	   /* Has there been any progress? */
+			lastread = read;
+			timeout += HZ / 10;
+		}
+		if (unlikely(time_after(jiffies, timeout))) {
+			printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
+			    "backlog closing vci %d\n",
+			    lvcc->tx.atmvcc->dev->number, lvcc->vci);
+			DPRINTK("read, write = %d, %d\n", read, write);
+			break;
+		}
+		msleep(40);
+	}
+	/* 15.2.2 - clear out all tx registers */
+	cardvcc_write(lvcc, 0, vcc_txreadptr);
+	cardvcc_write(lvcc, 0, vcc_txwriteptr);
+	cardvcc_write(lvcc, 0, vcc_txendptr);
+	cardvcc_write(lvcc, 0, vcc_txcrc1);
+	cardvcc_write(lvcc, 0, vcc_txcrc2);
+	cardvcc_write(lvcc, 0, vcc_txaddr2);
+	cardvcc_write(lvcc, 0, vcc_txaddr1);
+}
+
+/* -------------------- MANAGING AAL0 RX BUFFER: */
+
+static inline int aal0_buffer_allocate(struct lanai_dev *lanai)
+{
+	DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n");
+	lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80,
+			   lanai->pci);
+	return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0;
+}
+
+static inline void aal0_buffer_free(struct lanai_dev *lanai)
+{
+	DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n");
+	lanai_buf_deallocate(&lanai->aal0buf, lanai->pci);
+}
+
+/* -------------------- EEPROM UTILITIES: */
+
+/* Offsets of data in the EEPROM */
+#define EEPROM_COPYRIGHT	(0)
+#define EEPROM_COPYRIGHT_LEN	(44)
+#define EEPROM_CHECKSUM		(62)
+#define EEPROM_CHECKSUM_REV	(63)
+#define EEPROM_MAC		(64)
+#define EEPROM_MAC_REV		(70)
+#define EEPROM_SERIAL		(112)
+#define EEPROM_SERIAL_REV	(116)
+#define EEPROM_MAGIC		(120)
+#define EEPROM_MAGIC_REV	(124)
+
+#define EEPROM_MAGIC_VALUE	(0x5AB478D2)
+
+#ifndef READ_EEPROM
+
+/* Stub functions to use if EEPROM reading is disabled */
+static int __devinit eeprom_read(struct lanai_dev *lanai)
+{
+	printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
+	    lanai->number);
+	memset(&lanai->eeprom[EEPROM_MAC], 0, 6);
+	return 0;
+}
+
+static int __devinit eeprom_validate(struct lanai_dev *lanai)
+{
+	lanai->serialno = 0;
+	lanai->magicno = EEPROM_MAGIC_VALUE;
+	return 0;
+}
+
+#else /* READ_EEPROM */
+
+static int __devinit eeprom_read(struct lanai_dev *lanai)
+{
+	int i, address;
+	u8 data;
+	u32 tmp;
+#define set_config1(x)   do { lanai->conf1 = x; conf1_write(lanai); \
+			    } while (0)
+#define clock_h()	 set_config1(lanai->conf1 | CONFIG1_PROMCLK)
+#define clock_l()	 set_config1(lanai->conf1 &~ CONFIG1_PROMCLK)
+#define data_h()	 set_config1(lanai->conf1 | CONFIG1_PROMDATA)
+#define data_l()	 set_config1(lanai->conf1 &~ CONFIG1_PROMDATA)
+#define pre_read()	 do { data_h(); clock_h(); udelay(5); } while (0)
+#define read_pin()	 (reg_read(lanai, Status_Reg) & STATUS_PROMDATA)
+#define send_stop()	 do { data_l(); udelay(5); clock_h(); udelay(5); \
+			      data_h(); udelay(5); } while (0)
+	/* start with both clock and data high */
+	data_h(); clock_h(); udelay(5);
+	for (address = 0; address < LANAI_EEPROM_SIZE; address++) {
+		data = (address << 1) | 1;	/* Command=read + address */
+		/* send start bit */
+		data_l(); udelay(5);
+		clock_l(); udelay(5);
+		for (i = 128; i != 0; i >>= 1) {   /* write command out */
+			tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
+			    (data & i) ? CONFIG1_PROMDATA : 0;
+			if (lanai->conf1 != tmp) {
+				set_config1(tmp);
+				udelay(5);	/* Let new data settle */
+			}
+			clock_h(); udelay(5); clock_l(); udelay(5);
+		}
+		/* look for ack */
+		data_h(); clock_h(); udelay(5);
+		if (read_pin() != 0)
+			goto error;	/* No ack seen */
+		clock_l(); udelay(5);
+		/* read back result */
+		for (data = 0, i = 7; i >= 0; i--) {
+			data_h(); clock_h(); udelay(5);
+			data = (data << 1) | !!read_pin();
+			clock_l(); udelay(5);
+		}
+		/* look again for ack */
+		data_h(); clock_h(); udelay(5);
+		if (read_pin() == 0)
+			goto error;	/* Spurious ack */
+		clock_l(); udelay(5);
+		send_stop();
+		lanai->eeprom[address] = data;
+		DPRINTK("EEPROM 0x%04X %02X\n",
+		    (unsigned int) address, (unsigned int) data);
+	}
+	return 0;
+    error:
+	clock_l(); udelay(5);		/* finish read */
+	send_stop();
+	printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
+	    lanai->number, address);
+	return -EIO;
+#undef set_config1
+#undef clock_h
+#undef clock_l
+#undef data_h
+#undef data_l
+#undef pre_read
+#undef read_pin
+#undef send_stop
+}
+
+/* read a big-endian 4-byte value out of eeprom */
+static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
+{
+	return be32_to_cpup((u32 *) (&lanai->eeprom[address]));
+}
+
+/* Checksum/validate EEPROM contents */
+static int __devinit eeprom_validate(struct lanai_dev *lanai)
+{
+	int i, s;
+	u32 v;
+	const u8 *e = lanai->eeprom;
+#ifdef DEBUG
+	/* First, see if we can get an ASCIIZ string out of the copyright */
+	for (i = EEPROM_COPYRIGHT;
+	    i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++)
+		if (e[i] < 0x20 || e[i] > 0x7E)
+			break;
+	if ( i != EEPROM_COPYRIGHT &&
+	    i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0')
+		DPRINTK("eeprom: copyright = \"%s\"\n",
+		    (char *) &e[EEPROM_COPYRIGHT]);
+	else
+		DPRINTK("eeprom: copyright not found\n");
+#endif
+	/* Validate checksum */
+	for (i = s = 0; i < EEPROM_CHECKSUM; i++)
+		s += e[i];
+	s &= 0xFF;
+	if (s != e[EEPROM_CHECKSUM]) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
+		    "(wanted 0x%02X, got 0x%02X)\n", lanai->number,
+		    (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]);
+		return -EIO;
+	}
+	s ^= 0xFF;
+	if (s != e[EEPROM_CHECKSUM_REV]) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
+		    "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number,
+		    (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]);
+		return -EIO;
+	}
+	/* Verify MAC address */
+	for (i = 0; i < 6; i++)
+		if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) {
+			printk(KERN_ERR DEV_LABEL
+			    "(itf %d) : EEPROM MAC addresses don't match "
+			    "(0x%02X, inverse 0x%02X)\n", lanai->number,
+			    (unsigned int) e[EEPROM_MAC + i],
+			    (unsigned int) e[EEPROM_MAC_REV + i]);
+			return -EIO;
+		}
+	DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n",
+		e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2],
+		e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]);
+	/* Verify serial number */
+	lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL);
+	v = eeprom_be4(lanai, EEPROM_SERIAL_REV);
+	if ((lanai->serialno ^ v) != 0xFFFFFFFF) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
+		    "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
+		    (unsigned int) lanai->serialno, (unsigned int) v);
+		return -EIO;
+	}
+	DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno);
+	/* Verify magic number */
+	lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC);
+	v = eeprom_be4(lanai, EEPROM_MAGIC_REV);
+	if ((lanai->magicno ^ v) != 0xFFFFFFFF) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
+		    "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
+		    lanai->magicno, v);
+		return -EIO;
+	}
+	DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno);
+	if (lanai->magicno != EEPROM_MAGIC_VALUE)
+		printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
+		    "magic not what expected (got 0x%08X, not 0x%08X)\n",
+		    lanai->number, (unsigned int) lanai->magicno,
+		    (unsigned int) EEPROM_MAGIC_VALUE);
+	return 0;
+}
+
+#endif /* READ_EEPROM */
+
+static inline const u8 *eeprom_mac(const struct lanai_dev *lanai)
+{
+	return &lanai->eeprom[EEPROM_MAC];
+}
+
+/* -------------------- INTERRUPT HANDLING UTILITIES: */
+
+/* Interrupt types */
+#define INT_STATS	(0x00000002)	/* Statistics counter overflow */
+#define INT_SOOL	(0x00000004)	/* SOOL changed state */
+#define INT_LOCD	(0x00000008)	/* LOCD changed state */
+#define INT_LED		(0x00000010)	/* LED (HAPPI) changed state */
+#define INT_GPIN	(0x00000020)	/* GPIN changed state */
+#define INT_PING	(0x00000040)	/* PING_COUNT fulfilled */
+#define INT_WAKE	(0x00000080)	/* Lanai wants bus */
+#define INT_CBR0	(0x00000100)	/* CBR sched hit VCI 0 */
+#define INT_LOCK	(0x00000200)	/* Service list overflow */
+#define INT_MISMATCH	(0x00000400)	/* TX magic list mismatch */
+#define INT_AAL0_STR	(0x00000800)	/* Non-AAL5 buffer half filled */
+#define INT_AAL0	(0x00001000)	/* Non-AAL5 data available */
+#define INT_SERVICE	(0x00002000)	/* Service list entries available */
+#define INT_TABORTSENT	(0x00004000)	/* Target abort sent by lanai */
+#define INT_TABORTBM	(0x00008000)	/* Abort rcv'd as bus master */
+#define INT_TIMEOUTBM	(0x00010000)	/* No response to bus master */
+#define INT_PCIPARITY	(0x00020000)	/* Parity error on PCI */
+
+/* Sets of the above */
+#define INT_ALL		(0x0003FFFE)	/* All interrupts */
+#define INT_STATUS	(0x0000003C)	/* Some status pin changed */
+#define INT_DMASHUT	(0x00038000)	/* DMA engine got shut down */
+#define INT_SEGSHUT	(0x00000700)	/* Segmentation got shut down */
+
+static inline u32 intr_pending(const struct lanai_dev *lanai)
+{
+	return reg_read(lanai, IntStatusMasked_Reg);
+}
+
+static inline void intr_enable(const struct lanai_dev *lanai, u32 i)
+{
+	reg_write(lanai, i, IntControlEna_Reg);
+}
+
+static inline void intr_disable(const struct lanai_dev *lanai, u32 i)
+{
+	reg_write(lanai, i, IntControlDis_Reg);
+}
+
+/* -------------------- CARD/PCI STATUS: */
+
+static void status_message(int itf, const char *name, int status)
+{
+	static const char *onoff[2] = { "off to on", "on to off" };
+	printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
+	    itf, name, onoff[!status]);
+}
+
+static void lanai_check_status(struct lanai_dev *lanai)
+{
+	u32 new = reg_read(lanai, Status_Reg);
+	u32 changes = new ^ lanai->status;
+	lanai->status = new;
+#define e(flag, name) \
+		if (changes & flag) \
+			status_message(lanai->number, name, new & flag)
+	e(STATUS_SOOL, "SOOL");
+	e(STATUS_LOCD, "LOCD");
+	e(STATUS_LED, "LED");
+	e(STATUS_GPIN, "GPIN");
+#undef e
+}
+
+static void pcistatus_got(int itf, const char *name)
+{
+	printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
+}
+
+static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
+{
+	u16 s;
+	int result;
+	result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
+		    "%d\n", lanai->number, result);
+		return;
+	}
+	s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
+	    PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT |
+	    PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY;
+	if (s == 0)
+		return;
+	result = pci_write_config_word(lanai->pci, PCI_STATUS, s);
+	if (result != PCIBIOS_SUCCESSFUL)
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
+		    "%d\n", lanai->number, result);
+	if (clearonly)
+		return;
+#define e(flag, name, stat) \
+		if (s & flag) { \
+			pcistatus_got(lanai->number, name); \
+			++lanai->stats.pcierr_##stat; \
+		}
+	e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect);
+	e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set);
+	e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort);
+	e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort);
+	e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort);
+	e(PCI_STATUS_PARITY, "master parity", master_parity);
+#undef e
+}
+
+/* -------------------- VCC TX BUFFER UTILITIES: */
+
+/* space left in tx buffer in bytes */
+static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr)
+{
+	int r;
+	r = endptr * 16;
+	r -= ((unsigned long) lvcc->tx.buf.ptr) -
+	    ((unsigned long) lvcc->tx.buf.start);
+	r -= 16;	/* Leave "bubble" - if start==end it looks empty */
+	if (r < 0)
+		r += lanai_buf_size(&lvcc->tx.buf);
+	return r;
+}
+
+/* test if VCC is currently backlogged */
+static inline int vcc_is_backlogged(/*const*/ struct lanai_vcc *lvcc)
+{
+	return !skb_queue_empty(&lvcc->tx.backlog);
+}
+
+/* Bit fields in the segmentation buffer descriptor */
+#define DESCRIPTOR_MAGIC	(0xD0000000)
+#define DESCRIPTOR_AAL5		(0x00008000)
+#define DESCRIPTOR_AAL5_STREAM	(0x00004000)
+#define DESCRIPTOR_CLP		(0x00002000)
+
+/* Add 32-bit descriptor with its padding */
+static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc,
+	u32 flags, int len)
+{
+	int pos;
+	APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0,
+	    "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr);
+	lvcc->tx.buf.ptr += 4;	/* Hope the values REALLY don't matter */
+	pos = ((unsigned char *) lvcc->tx.buf.ptr) -
+	    (unsigned char *) lvcc->tx.buf.start;
+	APRINTK((pos & ~0x0001FFF0) == 0,
+	    "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, "
+	    "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
+	    lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
+	pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1);
+	APRINTK((pos & ~0x0001FFF0) == 0,
+	    "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, "
+	    "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
+	    lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
+	lvcc->tx.buf.ptr[-1] =
+	    cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 |
+	    ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ?
+	    DESCRIPTOR_CLP : 0) | flags | pos >> 4);
+	if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
+		lvcc->tx.buf.ptr = lvcc->tx.buf.start;
+}
+
+/* Add 32-bit AAL5 trailer and leave room for its CRC */
+static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc,
+	int len, int cpi, int uu)
+{
+	APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8,
+	    "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr);
+	lvcc->tx.buf.ptr += 2;
+	lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len);
+	if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
+		lvcc->tx.buf.ptr = lvcc->tx.buf.start;
+}
+
+static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc,
+	const unsigned char *src, int n)
+{
+	unsigned char *e;
+	int m;
+	e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
+	m = e - (unsigned char *) lvcc->tx.buf.end;
+	if (m < 0)
+		m = 0;
+	memcpy(lvcc->tx.buf.ptr, src, n - m);
+	if (m != 0) {
+		memcpy(lvcc->tx.buf.start, src + n - m, m);
+		e = ((unsigned char *) lvcc->tx.buf.start) + m;
+	}
+	lvcc->tx.buf.ptr = (u32 *) e;
+}
+
+static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n)
+{
+	unsigned char *e;
+	int m;
+	if (n == 0)
+		return;
+	e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
+	m = e - (unsigned char *) lvcc->tx.buf.end;
+	if (m < 0)
+		m = 0;
+	memset(lvcc->tx.buf.ptr, 0, n - m);
+	if (m != 0) {
+		memset(lvcc->tx.buf.start, 0, m);
+		e = ((unsigned char *) lvcc->tx.buf.start) + m;
+	}
+	lvcc->tx.buf.ptr = (u32 *) e;
+}
+
+/* Update "butt" register to specify new WritePtr */
+static inline void lanai_endtx(struct lanai_dev *lanai,
+	const struct lanai_vcc *lvcc)
+{
+	int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) -
+	    (unsigned char *) lvcc->tx.buf.start;
+	APRINTK((ptr & ~0x0001FFF0) == 0,
+	    "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n",
+	    ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr,
+	    lvcc->tx.buf.end);
+
+	/*
+	 * Since the "butt register" is a shared resounce on the card we
+	 * serialize all accesses to it through this spinlock.  This is
+	 * mostly just paranoia sicne the register is rarely "busy" anyway
+	 * but is needed for correctness.
+	 */
+	spin_lock(&lanai->endtxlock);
+	/*
+	 * We need to check if the "butt busy" bit is set before
+	 * updating the butt register.  In theory this should
+	 * never happen because the ATM card is plenty fast at
+	 * updating the register.  Still, we should make sure
+	 */
+	for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) {
+		if (unlikely(i > 50)) {
+			printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
+			    "always busy!\n", lanai->number);
+			break;
+		}
+		udelay(5);
+	}
+	/*
+	 * Before we tall the card to start work we need to be sure 100% of
+	 * the info in the service buffer has been written before we tell
+	 * the card about it
+	 */
+	wmb();
+	reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg);
+	spin_unlock(&lanai->endtxlock);
+}
+
+/*
+ * Add one AAL5 PDU to lvcc's transmit buffer.  Caller garauntees there's
+ * space available.  "pdusize" is the number of bytes the PDU will take
+ */
+static void lanai_send_one_aal5(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize)
+{
+	int pad;
+	APRINTK(pdusize == aal5_size(skb->len),
+	    "lanai_send_one_aal5: wrong size packet (%d != %d)\n",
+	    pdusize, aal5_size(skb->len));
+	vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize);
+	pad = pdusize - skb->len - 8;
+	APRINTK(pad >= 0, "pad is negative (%d)\n", pad);
+	APRINTK(pad < 48, "pad is too big (%d)\n", pad);
+	vcc_tx_memcpy(lvcc, skb->data, skb->len);
+	vcc_tx_memzero(lvcc, pad);
+	vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0);
+	lanai_endtx(lanai, lvcc);
+	lanai_free_skb(lvcc->tx.atmvcc, skb);
+	atomic_inc(&lvcc->tx.atmvcc->stats->tx);
+}
+
+/* Try to fill the buffer - don't call unless there is backlog */
+static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc, int endptr)
+{
+	int n;
+	struct sk_buff *skb;
+	int space = vcc_tx_space(lvcc, endptr);
+	APRINTK(vcc_is_backlogged(lvcc),
+	    "vcc_tx_unqueue() called with empty backlog (vci=%d)\n",
+	    lvcc->vci);
+	while (space >= 64) {
+		skb = skb_dequeue(&lvcc->tx.backlog);
+		if (skb == NULL)
+			goto no_backlog;
+		n = aal5_size(skb->len);
+		if (n + 16 > space) {
+			/* No room for this packet - put it back on queue */
+			skb_queue_head(&lvcc->tx.backlog, skb);
+			return;
+		}
+		lanai_send_one_aal5(lanai, lvcc, skb, n);
+		space -= n + 16;
+	}
+	if (!vcc_is_backlogged(lvcc)) {
+	    no_backlog:
+		__clear_bit(lvcc->vci, lanai->backlog_vccs);
+	}
+}
+
+/* Given an skb that we want to transmit either send it now or queue */
+static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
+	struct sk_buff *skb)
+{
+	int space, n;
+	if (vcc_is_backlogged(lvcc))		/* Already backlogged */
+		goto queue_it;
+	space = vcc_tx_space(lvcc,
+		    TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)));
+	n = aal5_size(skb->len);
+	APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n);
+	if (space < n + 16) {			/* No space for this PDU */
+		__set_bit(lvcc->vci, lanai->backlog_vccs);
+	    queue_it:
+		skb_queue_tail(&lvcc->tx.backlog, skb);
+		return;
+	}
+	lanai_send_one_aal5(lanai, lvcc, skb, n);
+}
+
+static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc, int endptr)
+{
+	printk(KERN_INFO DEV_LABEL
+	    ": vcc_tx_unqueue_aal0: not implemented\n");
+}
+
+static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
+	struct sk_buff *skb)
+{
+	printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
+	/* Remember to increment lvcc->tx.atmvcc->stats->tx */
+	lanai_free_skb(lvcc->tx.atmvcc, skb);
+}
+
+/* -------------------- VCC RX BUFFER UTILITIES: */
+
+/* unlike the _tx_ cousins, this doesn't update ptr */
+static inline void vcc_rx_memcpy(unsigned char *dest,
+	const struct lanai_vcc *lvcc, int n)
+{
+	int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n -
+	    ((const unsigned char *) (lvcc->rx.buf.end));
+	if (m < 0)
+		m = 0;
+	memcpy(dest, lvcc->rx.buf.ptr, n - m);
+	memcpy(dest + n - m, lvcc->rx.buf.start, m);
+	/* Make sure that these copies don't get reordered */
+	barrier();
+}
+
+/* Receive AAL5 data on a VCC with a particular endptr */
+static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr)
+{
+	int size;
+	struct sk_buff *skb;
+	/*const*/ u32 *x, *end = &lvcc->rx.buf.start[endptr * 4];
+	int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
+	if (n < 0)
+		n += lanai_buf_size(&lvcc->rx.buf);
+	APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15),
+	    "vcc_rx_aal5: n out of range (%d/%Zu)\n",
+	    n, lanai_buf_size(&lvcc->rx.buf));
+	/* Recover the second-to-last word to get true pdu length */
+	if ((x = &end[-2]) < lvcc->rx.buf.start)
+		x = &lvcc->rx.buf.end[-2];
+	/*
+	 * Before we actually read from the buffer, make sure the memory
+	 * changes have arrived
+	 */
+	rmb();
+	size = be32_to_cpup(x) & 0xffff;
+	if (unlikely(n != aal5_size(size))) {
+		/* Make sure size matches padding */
+		printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
+		    "on vci=%d - size=%d n=%d\n",
+		    lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n);
+		lvcc->stats.x.aal5.rx_badlen++;
+		goto out;
+	}
+	skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC);
+	if (unlikely(skb == NULL)) {
+		lvcc->stats.rx_nomem++;
+		goto out;
+	}
+	skb_put(skb, size);
+	vcc_rx_memcpy(skb->data, lvcc, size);
+	ATM_SKB(skb)->vcc = lvcc->rx.atmvcc;
+	do_gettimeofday(&skb->stamp);
+	lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb);
+	atomic_inc(&lvcc->rx.atmvcc->stats->rx);
+    out:
+	lvcc->rx.buf.ptr = end;
+	cardvcc_write(lvcc, endptr, vcc_rxreadptr);
+}
+
+static void vcc_rx_aal0(struct lanai_dev *lanai)
+{
+	printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
+	/* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */
+	/* Remember to increment lvcc->rx.atmvcc->stats->rx */
+}
+
+/* -------------------- MANAGING HOST-BASED VCC TABLE: */
+
+/* Decide whether to use vmalloc or get_zeroed_page for VCC table */
+#if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE
+#define VCCTABLE_GETFREEPAGE
+#else
+#include <linux/vmalloc.h>
+#endif
+
+static int __devinit vcc_table_allocate(struct lanai_dev *lanai)
+{
+#ifdef VCCTABLE_GETFREEPAGE
+	APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE,
+	    "vcc table > PAGE_SIZE!");
+	lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL);
+	return (lanai->vccs == NULL) ? -ENOMEM : 0;
+#else
+	int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
+	lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
+	if (unlikely(lanai->vccs == NULL))
+		return -ENOMEM;
+	memset(lanai->vccs, 0, bytes);
+	return 0;
+#endif
+}
+
+static inline void vcc_table_deallocate(const struct lanai_dev *lanai)
+{
+#ifdef VCCTABLE_GETFREEPAGE
+	free_page((unsigned long) lanai->vccs);
+#else
+	vfree(lanai->vccs);
+#endif
+}
+
+/* Allocate a fresh lanai_vcc, with the appropriate things cleared */
+static inline struct lanai_vcc *new_lanai_vcc(void)
+{
+	struct lanai_vcc *lvcc;
+	lvcc = (struct lanai_vcc *) kmalloc(sizeof(*lvcc), GFP_KERNEL);
+	if (likely(lvcc != NULL)) {
+		lvcc->vbase = NULL;
+		lvcc->rx.atmvcc = lvcc->tx.atmvcc = NULL;
+		lvcc->nref = 0;
+		memset(&lvcc->stats, 0, sizeof lvcc->stats);
+		lvcc->rx.buf.start = lvcc->tx.buf.start = NULL;
+		skb_queue_head_init(&lvcc->tx.backlog);
+#ifdef DEBUG
+		lvcc->tx.unqueue = NULL;
+		lvcc->vci = -1;
+#endif
+	}
+	return lvcc;
+}
+
+static int lanai_get_sized_buffer(struct lanai_dev *lanai,
+	struct lanai_buffer *buf, int max_sdu, int multiplier,
+	const char *name)
+{
+	int size;
+	if (unlikely(max_sdu < 1))
+		max_sdu = 1;
+	max_sdu = aal5_size(max_sdu);
+	size = (max_sdu + 16) * multiplier + 16;
+	lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci);
+	if (unlikely(buf->start == NULL))
+		return -ENOMEM;
+	if (unlikely(lanai_buf_size(buf) < size))
+		printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
+		    "for %s buffer, got only %Zu\n", lanai->number, size,
+		    name, lanai_buf_size(buf));
+	DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name);
+	return 0;
+}
+
+/* Setup a RX buffer for a currently unbound AAL5 vci */
+static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc, const struct atm_qos *qos)
+{
+	return lanai_get_sized_buffer(lanai, &lvcc->rx.buf,
+	    qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX");
+}
+
+/* Setup a TX buffer for a currently unbound AAL5 vci */
+static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
+	const struct atm_qos *qos)
+{
+	int max_sdu, multiplier;
+	if (qos->aal == ATM_AAL0) {
+		lvcc->tx.unqueue = vcc_tx_unqueue_aal0;
+		max_sdu = ATM_CELL_SIZE - 1;
+		multiplier = AAL0_TX_MULTIPLIER;
+	} else {
+		lvcc->tx.unqueue = vcc_tx_unqueue_aal5;
+		max_sdu = qos->txtp.max_sdu;
+		multiplier = AAL5_TX_MULTIPLIER;
+	}
+	return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu,
+	    multiplier, "TX");
+}
+
+static inline void host_vcc_bind(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc, vci_t vci)
+{
+	if (lvcc->vbase != NULL)
+		return;    /* We already were bound in the other direction */
+	DPRINTK("Binding vci %d\n", vci);
+#ifdef USE_POWERDOWN
+	if (lanai->nbound++ == 0) {
+		DPRINTK("Coming out of powerdown\n");
+		lanai->conf1 &= ~CONFIG1_POWERDOWN;
+		conf1_write(lanai);
+		conf2_write(lanai);
+	}
+#endif
+	lvcc->vbase = cardvcc_addr(lanai, vci);
+	lanai->vccs[lvcc->vci = vci] = lvcc;
+}
+
+static inline void host_vcc_unbind(struct lanai_dev *lanai,
+	struct lanai_vcc *lvcc)
+{
+	if (lvcc->vbase == NULL)
+		return;	/* This vcc was never bound */
+	DPRINTK("Unbinding vci %d\n", lvcc->vci);
+	lvcc->vbase = NULL;
+	lanai->vccs[lvcc->vci] = NULL;
+#ifdef USE_POWERDOWN
+	if (--lanai->nbound == 0) {
+		DPRINTK("Going into powerdown\n");
+		lanai->conf1 |= CONFIG1_POWERDOWN;
+		conf1_write(lanai);
+	}
+#endif
+}
+
+/* -------------------- RESET CARD: */
+
+static void lanai_reset(struct lanai_dev *lanai)
+{
+	printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not "
+	    "implemented\n", lanai->number);
+	/* TODO */
+	/* The following is just a hack until we write the real
+	 * resetter - at least ack whatever interrupt sent us
+	 * here
+	 */
+	reg_write(lanai, INT_ALL, IntAck_Reg);
+	lanai->stats.card_reset++;
+}
+
+/* -------------------- SERVICE LIST UTILITIES: */
+
+/*
+ * Allocate service buffer and tell card about it
+ */
+static int __devinit service_buffer_allocate(struct lanai_dev *lanai)
+{
+	lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8,
+	    lanai->pci);
+	if (unlikely(lanai->service.start == NULL))
+		return -ENOMEM;
+	DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n",
+	    (unsigned long) lanai->service.start,
+	    lanai_buf_size(&lanai->service),
+	    lanai_buf_size_cardorder(&lanai->service));
+	/* Clear ServWrite register to be safe */
+	reg_write(lanai, 0, ServWrite_Reg);
+	/* ServiceStuff register contains size and address of buffer */
+	reg_write(lanai,
+	    SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) |
+	    SSTUFF_SET_ADDR(lanai->service.dmaaddr),
+	    ServiceStuff_Reg);
+	return 0;
+}
+
+static inline void service_buffer_deallocate(struct lanai_dev *lanai)
+{
+	lanai_buf_deallocate(&lanai->service, lanai->pci);
+}
+
+/* Bitfields in service list */
+#define SERVICE_TX	(0x80000000)	/* Was from transmission */
+#define SERVICE_TRASH	(0x40000000)	/* RXed PDU was trashed */
+#define SERVICE_CRCERR	(0x20000000)	/* RXed PDU had CRC error */
+#define SERVICE_CI	(0x10000000)	/* RXed PDU had CI set */
+#define SERVICE_CLP	(0x08000000)	/* RXed PDU had CLP set */
+#define SERVICE_STREAM	(0x04000000)	/* RX Stream mode */
+#define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF)
+#define SERVICE_GET_END(x) ((x)&0x1FFF)
+
+/* Handle one thing from the service list - returns true if it marked a
+ * VCC ready for xmit
+ */
+static int handle_service(struct lanai_dev *lanai, u32 s)
+{
+	vci_t vci = SERVICE_GET_VCI(s);
+	struct lanai_vcc *lvcc;
+	read_lock(&vcc_sklist_lock);
+	lvcc = lanai->vccs[vci];
+	if (unlikely(lvcc == NULL)) {
+		read_unlock(&vcc_sklist_lock);
+		DPRINTK("(itf %d) got service entry 0x%X for nonexistent "
+		    "vcc %d\n", lanai->number, (unsigned int) s, vci);
+		if (s & SERVICE_TX)
+			lanai->stats.service_notx++;
+		else
+			lanai->stats.service_norx++;
+		return 0;
+	}
+	if (s & SERVICE_TX) {			/* segmentation interrupt */
+		if (unlikely(lvcc->tx.atmvcc == NULL)) {
+			read_unlock(&vcc_sklist_lock);
+			DPRINTK("(itf %d) got service entry 0x%X for non-TX "
+			    "vcc %d\n", lanai->number, (unsigned int) s, vci);
+			lanai->stats.service_notx++;
+			return 0;
+		}
+		__set_bit(vci, lanai->transmit_ready);
+		lvcc->tx.endptr = SERVICE_GET_END(s);
+		read_unlock(&vcc_sklist_lock);
+		return 1;
+	}
+	if (unlikely(lvcc->rx.atmvcc == NULL)) {
+		read_unlock(&vcc_sklist_lock);
+		DPRINTK("(itf %d) got service entry 0x%X for non-RX "
+		    "vcc %d\n", lanai->number, (unsigned int) s, vci);
+		lanai->stats.service_norx++;
+		return 0;
+	}
+	if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) {
+		read_unlock(&vcc_sklist_lock);
+		DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 "
+		    "vcc %d\n", lanai->number, (unsigned int) s, vci);
+		lanai->stats.service_rxnotaal5++;
+		atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
+		return 0;
+	}
+	if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) {
+		vcc_rx_aal5(lvcc, SERVICE_GET_END(s));
+		read_unlock(&vcc_sklist_lock);
+		return 0;
+	}
+	if (s & SERVICE_TRASH) {
+		int bytes;
+		read_unlock(&vcc_sklist_lock);
+		DPRINTK("got trashed rx pdu on vci %d\n", vci);
+		atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
+		lvcc->stats.x.aal5.service_trash++;
+		bytes = (SERVICE_GET_END(s) * 16) -
+		    (((unsigned long) lvcc->rx.buf.ptr) -
+		    ((unsigned long) lvcc->rx.buf.start)) + 47;
+		if (bytes < 0)
+			bytes += lanai_buf_size(&lvcc->rx.buf);
+		lanai->stats.ovfl_trash += (bytes / 48);
+		return 0;
+	}
+	if (s & SERVICE_STREAM) {
+		read_unlock(&vcc_sklist_lock);
+		atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
+		lvcc->stats.x.aal5.service_stream++;
+		printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
+		    "PDU on VCI %d!\n", lanai->number, vci);
+		lanai_reset(lanai);
+		return 0;
+	}
+	DPRINTK("got rx crc error on vci %d\n", vci);
+	atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
+	lvcc->stats.x.aal5.service_rxcrc++;
+	lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4];
+	cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr);
+	read_unlock(&vcc_sklist_lock);
+	return 0;
+}
+
+/* Try transmitting on all VCIs that we marked ready to serve */
+static void iter_transmit(struct lanai_dev *lanai, vci_t vci)
+{
+	struct lanai_vcc *lvcc = lanai->vccs[vci];
+	if (vcc_is_backlogged(lvcc))
+		lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr);
+}
+
+/* Run service queue -- called from interrupt context or with
+ * interrupts otherwise disabled and with the lanai->servicelock
+ * lock held
+ */
+static void run_service(struct lanai_dev *lanai)
+{
+	int ntx = 0;
+	u32 wreg = reg_read(lanai, ServWrite_Reg);
+	const u32 *end = lanai->service.start + wreg;
+	while (lanai->service.ptr != end) {
+		ntx += handle_service(lanai,
+		    le32_to_cpup(lanai->service.ptr++));
+		if (lanai->service.ptr >= lanai->service.end)
+			lanai->service.ptr = lanai->service.start;
+	}
+	reg_write(lanai, wreg, ServRead_Reg);
+	if (ntx != 0) {
+		read_lock(&vcc_sklist_lock);
+		vci_bitfield_iterate(lanai, lanai->transmit_ready,
+		    iter_transmit);
+		bitmap_zero(lanai->transmit_ready, NUM_VCI);
+		read_unlock(&vcc_sklist_lock);
+	}
+}
+
+/* -------------------- GATHER STATISTICS: */
+
+static void get_statistics(struct lanai_dev *lanai)
+{
+	u32 statreg = reg_read(lanai, Statistics_Reg);
+	lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg);
+	lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg);
+	lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg);
+	lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg);
+}
+
+/* -------------------- POLLING TIMER: */
+
+#ifndef DEBUG_RW
+/* Try to undequeue 1 backlogged vcc */
+static void iter_dequeue(struct lanai_dev *lanai, vci_t vci)
+{
+	struct lanai_vcc *lvcc = lanai->vccs[vci];
+	int endptr;
+	if (lvcc == NULL || lvcc->tx.atmvcc == NULL ||
+	    !vcc_is_backlogged(lvcc)) {
+		__clear_bit(vci, lanai->backlog_vccs);
+		return;
+	}
+	endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
+	lvcc->tx.unqueue(lanai, lvcc, endptr);
+}
+#endif /* !DEBUG_RW */
+
+static void lanai_timed_poll(unsigned long arg)
+{
+	struct lanai_dev *lanai = (struct lanai_dev *) arg;
+#ifndef DEBUG_RW
+	unsigned long flags;
+#ifdef USE_POWERDOWN
+	if (lanai->conf1 & CONFIG1_POWERDOWN)
+		return;
+#endif /* USE_POWERDOWN */
+	local_irq_save(flags);
+	/* If we can grab the spinlock, check if any services need to be run */
+	if (spin_trylock(&lanai->servicelock)) {
+		run_service(lanai);
+		spin_unlock(&lanai->servicelock);
+	}
+	/* ...and see if any backlogged VCs can make progress */
+	/* unfortunately linux has no read_trylock() currently */
+	read_lock(&vcc_sklist_lock);
+	vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue);
+	read_unlock(&vcc_sklist_lock);
+	local_irq_restore(flags);
+
+	get_statistics(lanai);
+#endif /* !DEBUG_RW */
+	mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD);
+}
+
+static inline void lanai_timed_poll_start(struct lanai_dev *lanai)
+{
+	init_timer(&lanai->timer);
+	lanai->timer.expires = jiffies + LANAI_POLL_PERIOD;
+	lanai->timer.data = (unsigned long) lanai;
+	lanai->timer.function = lanai_timed_poll;
+	add_timer(&lanai->timer);
+}
+
+static inline void lanai_timed_poll_stop(struct lanai_dev *lanai)
+{
+	del_timer_sync(&lanai->timer);
+}
+
+/* -------------------- INTERRUPT SERVICE: */
+
+static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason)
+{
+	u32 ack = 0;
+	if (reason & INT_SERVICE) {
+		ack = INT_SERVICE;
+		spin_lock(&lanai->servicelock);
+		run_service(lanai);
+		spin_unlock(&lanai->servicelock);
+	}
+	if (reason & (INT_AAL0_STR | INT_AAL0)) {
+		ack |= reason & (INT_AAL0_STR | INT_AAL0);
+		vcc_rx_aal0(lanai);
+	}
+	/* The rest of the interrupts are pretty rare */
+	if (ack == reason)
+		goto done;
+	if (reason & INT_STATS) {
+		reason &= ~INT_STATS;	/* No need to ack */
+		get_statistics(lanai);
+	}
+	if (reason & INT_STATUS) {
+		ack |= reason & INT_STATUS;
+		lanai_check_status(lanai);
+	}
+	if (unlikely(reason & INT_DMASHUT)) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
+		    "shutdown, reason=0x%08X, address=0x%08X\n",
+		    lanai->number, (unsigned int) (reason & INT_DMASHUT),
+		    (unsigned int) reg_read(lanai, DMA_Addr_Reg));
+		if (reason & INT_TABORTBM) {
+			lanai_reset(lanai);
+			return;
+		}
+		ack |= (reason & INT_DMASHUT);
+		printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
+		    lanai->number);
+		conf1_write(lanai);
+		lanai->stats.dma_reenable++;
+		pcistatus_check(lanai, 0);
+	}
+	if (unlikely(reason & INT_TABORTSENT)) {
+		ack |= (reason & INT_TABORTSENT);
+		printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
+		    lanai->number);
+		pcistatus_check(lanai, 0);
+	}
+	if (unlikely(reason & INT_SEGSHUT)) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
+		    "segmentation shutdown, reason=0x%08X\n", lanai->number,
+		    (unsigned int) (reason & INT_SEGSHUT));
+		lanai_reset(lanai);
+		return;
+	}
+	if (unlikely(reason & (INT_PING | INT_WAKE))) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
+		    "unexpected interrupt 0x%08X, resetting\n",
+		    lanai->number,
+		    (unsigned int) (reason & (INT_PING | INT_WAKE)));
+		lanai_reset(lanai);
+		return;
+	}
+#ifdef DEBUG
+	if (unlikely(ack != reason)) {
+		DPRINTK("unacked ints: 0x%08X\n",
+		    (unsigned int) (reason & ~ack));
+		ack = reason;
+	}
+#endif
+   done:
+	if (ack != 0)
+		reg_write(lanai, ack, IntAck_Reg);
+}
+
+static irqreturn_t lanai_int(int irq, void *devid, struct pt_regs *regs)
+{
+	struct lanai_dev *lanai = (struct lanai_dev *) devid;
+	u32 reason;
+
+	(void) irq; (void) regs;	/* unused variables */
+
+#ifdef USE_POWERDOWN
+	/*
+	 * If we're powered down we shouldn't be generating any interrupts -
+	 * so assume that this is a shared interrupt line and it's for someone
+	 * else
+	 */
+	if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN))
+		return IRQ_NONE;
+#endif
+
+	reason = intr_pending(lanai);
+	if (reason == 0)
+		return IRQ_NONE;	/* Must be for someone else */
+
+	do {
+		if (unlikely(reason == 0xFFFFFFFF))
+			break;		/* Maybe we've been unplugged? */
+		lanai_int_1(lanai, reason);
+		reason = intr_pending(lanai);
+	} while (reason != 0);
+
+	return IRQ_HANDLED;
+}
+
+/* TODO - it would be nice if we could use the "delayed interrupt" system
+ *   to some advantage
+ */
+
+/* -------------------- CHECK BOARD ID/REV: */
+
+/*
+ * The board id and revision are stored both in the reset register and
+ * in the PCI configuration space - the documentation says to check
+ * each of them.  If revp!=NULL we store the revision there
+ */
+static int check_board_id_and_rev(const char *name, u32 val, int *revp)
+{
+	DPRINTK("%s says board_id=%d, board_rev=%d\n", name,
+		(int) RESET_GET_BOARD_ID(val),
+		(int) RESET_GET_BOARD_REV(val));
+	if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) {
+		printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
+		    "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val));
+		return -ENODEV;
+	}
+	if (revp != NULL)
+		*revp = RESET_GET_BOARD_REV(val);
+	return 0;
+}
+
+/* -------------------- PCI INITIALIZATION/SHUTDOWN: */
+
+static int __devinit lanai_pci_start(struct lanai_dev *lanai)
+{
+	struct pci_dev *pci = lanai->pci;
+	int result;
+	u16 w;
+
+	if (pci_enable_device(pci) != 0) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
+		    "PCI device", lanai->number);
+		return -ENXIO;
+	}
+	pci_set_master(pci);
+	if (pci_set_dma_mask(pci, DMA_32BIT_MASK) != 0) {
+		printk(KERN_WARNING DEV_LABEL
+		    "(itf %d): No suitable DMA available.\n", lanai->number);
+		return -EBUSY;
+	}
+	if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
+		printk(KERN_WARNING DEV_LABEL
+		    "(itf %d): No suitable DMA available.\n", lanai->number);
+		return -EBUSY;
+	}
+	/* Get the pci revision byte */
+	result = pci_read_config_byte(pci, PCI_REVISION_ID,
+	    &lanai->pci_revision);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
+		    "PCI_REVISION_ID: %d\n", lanai->number, result);
+		return -EINVAL;
+	}
+	result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
+		    "PCI_SUBSYSTEM_ID: %d\n", lanai->number, result);
+		return -EINVAL;
+	}
+	result = check_board_id_and_rev("PCI", w, NULL);
+	if (result != 0)
+		return result;
+	/* Set latency timer to zero as per lanai docs */
+	result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0);
+	if (result != PCIBIOS_SUCCESSFUL) {
+		printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
+		    "PCI_LATENCY_TIMER: %d\n", lanai->number, result);
+		return -EINVAL;
+	}
+	pcistatus_check(lanai, 1);
+	pcistatus_check(lanai, 0);
+	return 0;
+}
+
+/* -------------------- VPI/VCI ALLOCATION: */
+
+/*
+ * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
+ * get a CBRZERO interrupt), and we can use it only if noone is receiving
+ * AAL0 traffic (since they will use the same queue) - according to the
+ * docs we shouldn't even use it for AAL0 traffic
+ */
+static inline int vci0_is_ok(struct lanai_dev *lanai,
+	const struct atm_qos *qos)
+{
+	if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0)
+		return 0;
+	if (qos->rxtp.traffic_class != ATM_NONE) {
+		if (lanai->naal0 != 0)
+			return 0;
+		lanai->conf2 |= CONFIG2_VCI0_NORMAL;
+		conf2_write_if_powerup(lanai);
+	}
+	return 1;
+}
+
+/* return true if vci is currently unused, or if requested qos is
+ * compatible
+ */
+static int vci_is_ok(struct lanai_dev *lanai, vci_t vci,
+	const struct atm_vcc *atmvcc)
+{
+	const struct atm_qos *qos = &atmvcc->qos;
+	const struct lanai_vcc *lvcc = lanai->vccs[vci];
+	if (vci == 0 && !vci0_is_ok(lanai, qos))
+		return 0;
+	if (unlikely(lvcc != NULL)) {
+		if (qos->rxtp.traffic_class != ATM_NONE &&
+		    lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc)
+			return 0;
+		if (qos->txtp.traffic_class != ATM_NONE &&
+		    lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc)
+			return 0;
+		if (qos->txtp.traffic_class == ATM_CBR &&
+		    lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc)
+			return 0;
+	}
+	if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 &&
+	    qos->rxtp.traffic_class != ATM_NONE) {
+		const struct lanai_vcc *vci0 = lanai->vccs[0];
+		if (vci0 != NULL && vci0->rx.atmvcc != NULL)
+			return 0;
+		lanai->conf2 &= ~CONFIG2_VCI0_NORMAL;
+		conf2_write_if_powerup(lanai);
+	}
+	return 1;
+}
+
+static int lanai_normalize_ci(struct lanai_dev *lanai,
+	const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip)
+{
+	switch (*vpip) {
+		case ATM_VPI_ANY:
+			*vpip = 0;
+			/* FALLTHROUGH */
+		case 0:
+			break;
+		default:
+			return -EADDRINUSE;
+	}
+	switch (*vcip) {
+		case ATM_VCI_ANY:
+			for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci;
+			    (*vcip)++)
+				if (vci_is_ok(lanai, *vcip, atmvcc))
+					return 0;
+			return -EADDRINUSE;
+		default:
+			if (*vcip >= lanai->num_vci || *vcip < 0 ||
+			    !vci_is_ok(lanai, *vcip, atmvcc))
+				return -EADDRINUSE;
+	}
+	return 0;
+}
+
+/* -------------------- MANAGE CBR: */
+
+/*
+ * CBR ICG is stored as a fixed-point number with 4 fractional bits.
+ * Note that storing a number greater than 2046.0 will result in
+ * incorrect shaping
+ */
+#define CBRICG_FRAC_BITS	(4)
+#define CBRICG_MAX		(2046 << CBRICG_FRAC_BITS)
+
+/*
+ * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1)
+ * where MAXPCR is (according to the docs) 25600000/(54*8),
+ * which is equal to (3125<<9)/27.
+ *
+ * Solving for ICG, we get:
+ *    ICG = MAXPCR/PCR - 1
+ *    ICG = (3125<<9)/(27*PCR) - 1
+ *    ICG = ((3125<<9) - (27*PCR)) / (27*PCR)
+ *
+ * The end result is supposed to be a fixed-point number with FRAC_BITS
+ * bits of a fractional part, so we keep everything in the numerator
+ * shifted by that much as we compute
+ *
+ */
+static int pcr_to_cbricg(/*const*/ struct atm_qos *qos)
+{
+	int rounddown = 0;	/* 1 = Round PCR down, i.e. round ICG _up_ */
+	int x, icg, pcr = atm_pcr_goal(&qos->txtp);
+	if (pcr == 0)		/* Use maximum bandwidth */
+		return 0;
+	if (pcr < 0) {
+		rounddown = 1;
+		pcr = -pcr;
+	}
+	x = pcr * 27;
+	icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS);
+	if (rounddown)
+		icg += x - 1;
+	icg /= x;
+	if (icg > CBRICG_MAX)
+		icg = CBRICG_MAX;
+	DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n",
+	    pcr, rounddown ? 'Y' : 'N', icg);
+	return icg;
+}
+
+static inline void lanai_cbr_setup(struct lanai_dev *lanai)
+{
+	reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg);
+	reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg);
+	lanai->conf2 |= CONFIG2_CBR_ENABLE;
+	conf2_write(lanai);
+}
+
+static inline void lanai_cbr_shutdown(struct lanai_dev *lanai)
+{
+	lanai->conf2 &= ~CONFIG2_CBR_ENABLE;
+	conf2_write(lanai);
+}
+
+/* -------------------- OPERATIONS: */
+
+/* setup a newly detected device */
+static int __devinit lanai_dev_open(struct atm_dev *atmdev)
+{
+	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
+	unsigned long raw_base;
+	int result;
+
+	DPRINTK("In lanai_dev_open()\n");
+	/* Basic device fields */
+	lanai->number = atmdev->number;
+	lanai->num_vci = NUM_VCI;
+	bitmap_zero(lanai->backlog_vccs, NUM_VCI);
+	bitmap_zero(lanai->transmit_ready, NUM_VCI);
+	lanai->naal0 = 0;
+#ifdef USE_POWERDOWN
+	lanai->nbound = 0;
+#endif
+	lanai->cbrvcc = NULL;
+	memset(&lanai->stats, 0, sizeof lanai->stats);
+	spin_lock_init(&lanai->endtxlock);
+	spin_lock_init(&lanai->servicelock);
+	atmdev->ci_range.vpi_bits = 0;
+	atmdev->ci_range.vci_bits = 0;
+	while (1 << atmdev->ci_range.vci_bits < lanai->num_vci)
+		atmdev->ci_range.vci_bits++;
+	atmdev->link_rate = ATM_25_PCR;
+
+	/* 3.2: PCI initialization */
+	if ((result = lanai_pci_start(lanai)) != 0)
+		goto error;
+	raw_base = lanai->pci->resource[0].start;
+	lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
+	if (lanai->base == NULL) {
+		printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
+		goto error_pci;
+	}
+	/* 3.3: Reset lanai and PHY */
+	reset_board(lanai);
+	lanai->conf1 = reg_read(lanai, Config1_Reg);
+	lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN |
+	    CONFIG1_MASK_LEDMODE);
+	lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL);
+	reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
+	udelay(1000);
+	conf1_write(lanai);
+
+	/*
+	 * 3.4: Turn on endian mode for big-endian hardware
+	 *   We don't actually want to do this - the actual bit fields
+	 *   in the endian register are not documented anywhere.
+	 *   Instead we do the bit-flipping ourselves on big-endian
+	 *   hardware.
+	 *
+	 * 3.5: get the board ID/rev by reading the reset register
+	 */
+	result = check_board_id_and_rev("register",
+	    reg_read(lanai, Reset_Reg), &lanai->board_rev);
+	if (result != 0)
+		goto error_unmap;
+
+	/* 3.6: read EEPROM */
+	if ((result = eeprom_read(lanai)) != 0)
+		goto error_unmap;
+	if ((result = eeprom_validate(lanai)) != 0)
+		goto error_unmap;
+
+	/* 3.7: re-reset PHY, do loopback tests, setup PHY */
+	reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
+	udelay(1000);
+	conf1_write(lanai);
+	/* TODO - loopback tests */
+	lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE);
+	conf1_write(lanai);
+
+	/* 3.8/3.9: test and initialize card SRAM */
+	if ((result = sram_test_and_clear(lanai)) != 0)
+		goto error_unmap;
+
+	/* 3.10: initialize lanai registers */
+	lanai->conf1 |= CONFIG1_DMA_ENABLE;
+	conf1_write(lanai);
+	if ((result = service_buffer_allocate(lanai)) != 0)
+		goto error_unmap;
+	if ((result = vcc_table_allocate(lanai)) != 0)
+		goto error_service;
+	lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) |
+	    CONFIG2_HEC_DROP |	/* ??? */ CONFIG2_PTI7_MODE;
+	conf2_write(lanai);
+	reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg);
+	reg_write(lanai, 0, CBR_ICG_Reg);	/* CBR defaults to no limit */
+	if ((result = request_irq(lanai->pci->irq, lanai_int, SA_SHIRQ,
+	    DEV_LABEL, lanai)) != 0) {
+		printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
+		goto error_vcctable;
+	}
+	mb();				/* Make sure that all that made it */
+	intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE));
+	/* 3.11: initialize loop mode (i.e. turn looping off) */
+	lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) |
+	    CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) |
+	    CONFIG1_GPOUT2 | CONFIG1_GPOUT3;
+	conf1_write(lanai);
+	lanai->status = reg_read(lanai, Status_Reg);
+	/* We're now done initializing this card */
+#ifdef USE_POWERDOWN
+	lanai->conf1 |= CONFIG1_POWERDOWN;
+	conf1_write(lanai);
+#endif
+	memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
+	lanai_timed_poll_start(lanai);
+	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
+	    "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
+	    (int) lanai->pci_revision, (unsigned long) lanai->base,
+	    lanai->pci->irq,
+	    atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
+	    atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
+	printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
+	    "board_rev=%d\n", lanai->number,
+	    lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,
+	    (unsigned int) lanai->serialno, lanai->board_rev);
+	return 0;
+
+    error_vcctable:
+	vcc_table_deallocate(lanai);
+    error_service:
+	service_buffer_deallocate(lanai);
+    error_unmap:
+	reset_board(lanai);
+#ifdef USE_POWERDOWN
+	lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN;
+	conf1_write(lanai);
+#endif
+	iounmap(lanai->base);
+    error_pci:
+	pci_disable_device(lanai->pci);
+    error:
+	return result;
+}
+
+/* called when device is being shutdown, and all vcc's are gone - higher
+ * levels will deallocate the atm device for us
+ */
+static void lanai_dev_close(struct atm_dev *atmdev)
+{
+	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
+	printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
+	    lanai->number);
+	lanai_timed_poll_stop(lanai);
+#ifdef USE_POWERDOWN
+	lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN;
+	conf1_write(lanai);
+#endif
+	intr_disable(lanai, INT_ALL);
+	free_irq(lanai->pci->irq, lanai);
+	reset_board(lanai);
+#ifdef USE_POWERDOWN
+	lanai->conf1 |= CONFIG1_POWERDOWN;
+	conf1_write(lanai);
+#endif
+	pci_disable_device(lanai->pci);
+	vcc_table_deallocate(lanai);
+	service_buffer_deallocate(lanai);
+	iounmap(lanai->base);
+	kfree(lanai);
+}
+
+/* close a vcc */
+static void lanai_close(struct atm_vcc *atmvcc)
+{
+	struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
+	struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
+	if (lvcc == NULL)
+		return;
+	clear_bit(ATM_VF_READY, &atmvcc->flags);
+	clear_bit(ATM_VF_PARTIAL, &atmvcc->flags);
+	if (lvcc->rx.atmvcc == atmvcc) {
+		lanai_shutdown_rx_vci(lvcc);
+		if (atmvcc->qos.aal == ATM_AAL0) {
+			if (--lanai->naal0 <= 0)
+				aal0_buffer_free(lanai);
+		} else
+			lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci);
+		lvcc->rx.atmvcc = NULL;
+	}
+	if (lvcc->tx.atmvcc == atmvcc) {
+		if (atmvcc == lanai->cbrvcc) {
+			if (lvcc->vbase != NULL)
+				lanai_cbr_shutdown(lanai);
+			lanai->cbrvcc = NULL;
+		}
+		lanai_shutdown_tx_vci(lanai, lvcc);
+		lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci);
+		lvcc->tx.atmvcc = NULL;
+	}
+	if (--lvcc->nref == 0) {
+		host_vcc_unbind(lanai, lvcc);
+		kfree(lvcc);
+	}
+	atmvcc->dev_data = NULL;
+	clear_bit(ATM_VF_ADDR, &atmvcc->flags);
+}
+
+/* open a vcc on the card to vpi/vci */
+static int lanai_open(struct atm_vcc *atmvcc)
+{
+	struct lanai_dev *lanai;
+	struct lanai_vcc *lvcc;
+	int result = 0;
+	int vci = atmvcc->vci;
+	short vpi = atmvcc->vpi;
+	/* we don't support partial open - it's not really useful anyway */
+	if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) ||
+	    (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC))
+		return -EINVAL;
+	lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
+	result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci);
+	if (unlikely(result != 0))
+		goto out;
+	set_bit(ATM_VF_ADDR, &atmvcc->flags);
+	if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5)
+		return -EINVAL;
+	DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
+	    (int) vpi, vci);
+	lvcc = lanai->vccs[vci];
+	if (lvcc == NULL) {
+		lvcc = new_lanai_vcc();
+		if (unlikely(lvcc == NULL))
+			return -ENOMEM;
+		atmvcc->dev_data = lvcc;
+	}
+	lvcc->nref++;
+	if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) {
+		APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n",
+		    vci);
+		if (atmvcc->qos.aal == ATM_AAL0) {
+			if (lanai->naal0 == 0)
+				result = aal0_buffer_allocate(lanai);
+		} else
+			result = lanai_setup_rx_vci_aal5(
+			    lanai, lvcc, &atmvcc->qos);
+		if (unlikely(result != 0))
+			goto out_free;
+		lvcc->rx.atmvcc = atmvcc;
+		lvcc->stats.rx_nomem = 0;
+		lvcc->stats.x.aal5.rx_badlen = 0;
+		lvcc->stats.x.aal5.service_trash = 0;
+		lvcc->stats.x.aal5.service_stream = 0;
+		lvcc->stats.x.aal5.service_rxcrc = 0;
+		if (atmvcc->qos.aal == ATM_AAL0)
+			lanai->naal0++;
+	}
+	if (atmvcc->qos.txtp.traffic_class != ATM_NONE) {
+		APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n",
+		    vci);
+		result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos);
+		if (unlikely(result != 0))
+			goto out_free;
+		lvcc->tx.atmvcc = atmvcc;
+		if (atmvcc->qos.txtp.traffic_class == ATM_CBR) {
+			APRINTK(lanai->cbrvcc == NULL,
+			    "cbrvcc!=NULL, vci=%d\n", vci);
+			lanai->cbrvcc = atmvcc;
+		}
+	}
+	host_vcc_bind(lanai, lvcc, vci);
+	/*
+	 * Make sure everything made it to RAM before we tell the card about
+	 * the VCC
+	 */
+	wmb();
+	if (atmvcc == lvcc->rx.atmvcc)
+		host_vcc_start_rx(lvcc);
+	if (atmvcc == lvcc->tx.atmvcc) {
+		host_vcc_start_tx(lvcc);
+		if (lanai->cbrvcc == atmvcc)
+			lanai_cbr_setup(lanai);
+	}
+	set_bit(ATM_VF_READY, &atmvcc->flags);
+	return 0;
+    out_free:
+	lanai_close(atmvcc);
+    out:
+	return result;
+}
+
+#if 0
+/* ioctl operations for card */
+/* NOTE: these are all DEBUGGING ONLY currently */
+static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
+{
+	int result = 0;
+	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
+	switch(cmd) {
+		case 2106275:
+			shutdown_atm_dev(atmdev);
+			return 0;
+		case 2200000: {
+			unsigned long flags;
+			spin_lock_irqsave(&lanai->servicelock, flags);
+			run_service(lanai);
+			spin_unlock_irqrestore(&lanai->servicelock, flags);
+			return 0; }
+		case 2200002:
+			get_statistics(lanai);
+			return 0;
+		case 2200003: {
+			unsigned int i;
+			for (i = 0; i <= 0x5C ; i += 4) {
+				if (i==0x48) /* Write-only butt reg */
+					continue;
+				printk(KERN_CRIT DEV_LABEL "  0x%02X: "
+				    "0x%08X\n", i,
+				    (unsigned int) readl(lanai->base + i));
+				barrier(); mb();
+				pcistatus_check(lanai, 0);
+				barrier(); mb();
+			}
+			return 0; }
+		case 2200004: {
+			u8 b;
+			u16 w;
+			u32 dw;
+			struct pci_dev *pci = lanai->pci;
+			(void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
+			DPRINTK("vendor = 0x%X\n", (unsigned int) w);
+			(void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
+			DPRINTK("device = 0x%X\n", (unsigned int) w);
+			(void) pci_read_config_word(pci, PCI_COMMAND, &w);
+			DPRINTK("command = 0x%X\n", (unsigned int) w);
+			(void) pci_read_config_word(pci, PCI_STATUS, &w);
+			DPRINTK("status = 0x%X\n", (unsigned int) w);
+			(void) pci_read_config_dword(pci,
+			    PCI_CLASS_REVISION, &dw);
+			DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
+			(void) pci_read_config_byte(pci,
+			    PCI_CACHE_LINE_SIZE, &b);
+			DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
+			(void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
+			DPRINTK("latency = %d (0x%X)\n",
+			    (int) b, (unsigned int) b);
+			(void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
+			DPRINTK("header type = 0x%X\n", (unsigned int) b);
+			(void) pci_read_config_byte(pci, PCI_BIST, &b);
+			DPRINTK("bist = 0x%X\n", (unsigned int) b);
+			/* skipping a few here */
+			(void) pci_read_config_byte(pci,
+			    PCI_INTERRUPT_LINE, &b);
+			DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
+			(void) pci_read_config_byte(pci,
+			    PCI_INTERRUPT_PIN, &b);
+			DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
+			(void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
+			DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
+			(void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
+			DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
+			return 0;
+#ifdef USE_POWERDOWN
+		case 2200005:
+			DPRINTK("Coming out of powerdown\n");
+			lanai->conf1 &= ~CONFIG1_POWERDOWN;
+			conf1_write(lanai);
+			return 0;
+#endif
+		default:
+			result = -ENOIOCTLCMD;
+	}
+	return result;
+}
+#else /* !0 */
+#define lanai_ioctl NULL
+#endif /* 0 */
+
+static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
+{
+	struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
+	struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
+	unsigned long flags;
+	if (unlikely(lvcc == NULL || lvcc->vbase == NULL ||
+	      lvcc->tx.atmvcc != atmvcc))
+		goto einval;
+#ifdef DEBUG
+	if (unlikely(skb == NULL)) {
+		DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci);
+		goto einval;
+	}
+	if (unlikely(lanai == NULL)) {
+		DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci);
+		goto einval;
+	}
+#endif
+	ATM_SKB(skb)->vcc = atmvcc;
+	switch (atmvcc->qos.aal) {
+		case ATM_AAL5:
+			read_lock_irqsave(&vcc_sklist_lock, flags);
+			vcc_tx_aal5(lanai, lvcc, skb);
+			read_unlock_irqrestore(&vcc_sklist_lock, flags);
+			return 0;
+		case ATM_AAL0:
+			if (unlikely(skb->len != ATM_CELL_SIZE-1))
+				goto einval;
+  /* NOTE - this next line is technically invalid - we haven't unshared skb */
+			cpu_to_be32s((u32 *) skb->data);
+			read_lock_irqsave(&vcc_sklist_lock, flags);
+			vcc_tx_aal0(lanai, lvcc, skb);
+			read_unlock_irqrestore(&vcc_sklist_lock, flags);
+			return 0;
+	}
+	DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal,
+	    atmvcc->vci);
+    einval:
+	lanai_free_skb(atmvcc, skb);
+	return -EINVAL;
+}
+
+static int lanai_change_qos(struct atm_vcc *atmvcc,
+	/*const*/ struct atm_qos *qos, int flags)
+{
+	return -EBUSY;		/* TODO: need to write this */
+}
+
+#ifndef CONFIG_PROC_FS
+#define lanai_proc_read NULL
+#else
+static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
+{
+	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
+	loff_t left = *pos;
+	struct lanai_vcc *lvcc;
+	if (left-- == 0)
+		return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
+		    "serial=%u, magic=0x%08X, num_vci=%d\n",
+		    atmdev->number, lanai->type==lanai2 ? "2" : "HB",
+		    (unsigned int) lanai->serialno,
+		    (unsigned int) lanai->magicno, lanai->num_vci);
+	if (left-- == 0)
+		return sprintf(page, "revision: board=%d, pci_if=%d\n",
+		    lanai->board_rev, (int) lanai->pci_revision);
+	if (left-- == 0)
+		return sprintf(page, "EEPROM ESI: "
+		    "%02X:%02X:%02X:%02X:%02X:%02X\n",
+		    lanai->eeprom[EEPROM_MAC + 0],
+		    lanai->eeprom[EEPROM_MAC + 1],
+		    lanai->eeprom[EEPROM_MAC + 2],
+		    lanai->eeprom[EEPROM_MAC + 3],
+		    lanai->eeprom[EEPROM_MAC + 4],
+		    lanai->eeprom[EEPROM_MAC + 5]);
+	if (left-- == 0)
+		return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, "
+		    "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0,
+		    (lanai->status & STATUS_LOCD) ? 1 : 0,
+		    (lanai->status & STATUS_LED) ? 1 : 0,
+		    (lanai->status & STATUS_GPIN) ? 1 : 0);
+	if (left-- == 0)
+		return sprintf(page, "global buffer sizes: service=%Zu, "
+		    "aal0_rx=%Zu\n", lanai_buf_size(&lanai->service),
+		    lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0);
+	if (left-- == 0) {
+		get_statistics(lanai);
+		return sprintf(page, "cells in error: overflow=%u, "
+		    "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n",
+		    lanai->stats.ovfl_trash, lanai->stats.vci_trash,
+		    lanai->stats.hec_err, lanai->stats.atm_ovfl);
+	}
+	if (left-- == 0)
+		return sprintf(page, "PCI errors: parity_detect=%u, "
+		    "master_abort=%u, master_target_abort=%u,\n",
+		    lanai->stats.pcierr_parity_detect,
+		    lanai->stats.pcierr_serr_set,
+		    lanai->stats.pcierr_m_target_abort);
+	if (left-- == 0)
+		return sprintf(page, "            slave_target_abort=%u, "
+		    "master_parity=%u\n", lanai->stats.pcierr_s_target_abort,
+		    lanai->stats.pcierr_master_parity);
+	if (left-- == 0)
+		return sprintf(page, "                     no_tx=%u, "
+		    "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx,
+		    lanai->stats.service_notx,
+		    lanai->stats.service_rxnotaal5);
+	if (left-- == 0)
+		return sprintf(page, "resets: dma=%u, card=%u\n",
+		    lanai->stats.dma_reenable, lanai->stats.card_reset);
+	/* At this point, "left" should be the VCI we're looking for */
+	read_lock(&vcc_sklist_lock);
+	for (; ; left++) {
+		if (left >= NUM_VCI) {
+			left = 0;
+			goto out;
+		}
+		if ((lvcc = lanai->vccs[left]) != NULL)
+			break;
+		(*pos)++;
+	}
+	/* Note that we re-use "left" here since we're done with it */
+	left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u",  (vci_t) left,
+	    lvcc->nref, lvcc->stats.rx_nomem);
+	if (lvcc->rx.atmvcc != NULL) {
+		left += sprintf(&page[left], ",\n          rx_AAL=%d",
+		    lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0);
+		if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5)
+			left += sprintf(&page[left], ", rx_buf_size=%Zu, "
+			    "rx_bad_len=%u,\n          rx_service_trash=%u, "
+			    "rx_service_stream=%u, rx_bad_crc=%u",
+			    lanai_buf_size(&lvcc->rx.buf),
+			    lvcc->stats.x.aal5.rx_badlen,
+			    lvcc->stats.x.aal5.service_trash,
+			    lvcc->stats.x.aal5.service_stream,
+			    lvcc->stats.x.aal5.service_rxcrc);
+	}
+	if (lvcc->tx.atmvcc != NULL)
+		left += sprintf(&page[left], ",\n          tx_AAL=%d, "
+		    "tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c",
+		    lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0,
+		    lanai_buf_size(&lvcc->tx.buf),
+		    lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U',
+		    vcc_is_backlogged(lvcc) ? 'Y' : 'N');
+	page[left++] = '\n';
+	page[left] = '\0';
+    out:
+	read_unlock(&vcc_sklist_lock);
+	return left;
+}
+#endif /* CONFIG_PROC_FS */
+
+/* -------------------- HOOKS: */
+
+static const struct atmdev_ops ops = {
+	.dev_close	= lanai_dev_close,
+	.open		= lanai_open,
+	.close		= lanai_close,
+	.ioctl		= lanai_ioctl,
+	.getsockopt	= NULL,
+	.setsockopt	= NULL,
+	.send		= lanai_send,
+	.phy_put	= NULL,
+	.phy_get	= NULL,
+	.change_qos	= lanai_change_qos,
+	.proc_read	= lanai_proc_read,
+	.owner		= THIS_MODULE
+};
+
+/* initialize one probed card */
+static int __devinit lanai_init_one(struct pci_dev *pci,
+				    const struct pci_device_id *ident)
+{
+	struct lanai_dev *lanai;
+	struct atm_dev *atmdev;
+	int result;
+
+	lanai = (struct lanai_dev *) kmalloc(sizeof(*lanai), GFP_KERNEL);
+	if (lanai == NULL) {
+		printk(KERN_ERR DEV_LABEL
+		       ": couldn't allocate dev_data structure!\n");
+		return -ENOMEM;
+	}
+
+	atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	if (atmdev == NULL) {
+		printk(KERN_ERR DEV_LABEL
+		    ": couldn't register atm device!\n");
+		kfree(lanai);
+		return -EBUSY;
+	}
+
+	atmdev->dev_data = lanai;
+	lanai->pci = pci;
+	lanai->type = (enum lanai_type) ident->device;
+
+	result = lanai_dev_open(atmdev);
+	if (result != 0) {
+		DPRINTK("lanai_start() failed, err=%d\n", -result);
+		atm_dev_deregister(atmdev);
+		kfree(lanai);
+	}
+	return result;
+}
+
+static struct pci_device_id lanai_pci_tbl[] = {
+	{
+		PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
+	},
+	{
+		PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
+	},
+	{ 0, }	/* terminal entry */
+};
+MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
+
+static struct pci_driver lanai_driver = {
+	.name     = DEV_LABEL,
+	.id_table = lanai_pci_tbl,
+	.probe    = lanai_init_one,
+};
+
+static int __init lanai_module_init(void)
+{
+	int x;
+
+	x = pci_register_driver(&lanai_driver);
+	if (x != 0)
+		printk(KERN_ERR DEV_LABEL ": no adapter found\n");
+	return x;
+}
+
+static void __exit lanai_module_exit(void)
+{
+	/* We'll only get called when all the interfaces are already
+	 * gone, so there isn't much to do
+	 */
+	DPRINTK("cleanup_module()\n");
+}
+
+module_init(lanai_module_init);
+module_exit(lanai_module_exit);
+
+MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>");
+MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver");
+MODULE_LICENSE("GPL");