Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
 "Mostly low level driver specific changes.

  Two changes are somewhat noteworthy.  First, Dan's patchset to support
  per-port msix interrupt handling for ahci, which was tried last cycle
  but had to be backed out due to a couple issues, is back and seems to
  be working fine.  Second, libata exception handling now uses
  usleep_range() instead of msleep() for sleeps < 20ms which can make
  things snappier in some corner cases"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: skip debounce delay on link resume
  ata: ahci_brcmstb: disable DIPM support
  ata: ahci_brcmstb: enable support for ALPM
  drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  sata_sx4: correctly handling failed allocation
  ata: ahci_brcmstb: add support for MIPS-based platforms
  ahci: qoriq: Adjust the default register values on ls1021a
  ahci: qoriq: Update the default Rx watermark value
  ahci: qoriq: Adjust the default register values on ls1043a
  ahci: compile out msi/msix infrastructure
  ata: core: fix irq description on AHCI single irq systems
  ata: ahci_brcmstb: remove unused definitions
  ata: ahci_brcmstb: add a quirk for MIPS-based platforms
  ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
  ata: sata_rcar: Remove obsolete platform_device_id entries
  sata_rcar: Add compatible string for r8a7795
  ahci: kill 'intr_status'
  ahci: switch from 'threaded' to 'hardirq' interrupt handling
  ahci: per-port msix support

9 files changed, 193 insertions, 82 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6aaa3f8..861643ea 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -100,7 +100,7 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_BRCMSTB
 	tristate "Broadcom STB AHCI SATA support"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  STB SoC's.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index cdfbcc5..594fcab 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1306,15 +1306,13 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 #endif
 
 /*
- * ahci_init_msix() only implements single MSI-X support, not multiple
- * MSI-X per-port interrupts. This is needed for host controllers that only
- * have MSI-X support implemented, but no MSI or intx.
+ * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer
+ * to single msi.
  */
 static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
-			  struct ahci_host_priv *hpriv)
+			  struct ahci_host_priv *hpriv, unsigned long flags)
 {
-	int rc, nvec;
-	struct msix_entry entry = {};
+	int nvec, i, rc;
 
 	/* Do not init MSI-X if MSI is disabled for the device */
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
@@ -1324,22 +1322,39 @@ static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
 	if (nvec < 0)
 		return nvec;
 
-	if (!nvec) {
+	/*
+	 * Proper MSI-X implementations will have a vector per-port.
+	 * Barring that, we prefer single-MSI over single-MSIX.  If this
+	 * check fails (not enough MSI-X vectors for all ports) we will
+	 * be called again with the flag clear iff ahci_init_msi()
+	 * fails.
+	 */
+	if (flags & AHCI_HFLAG_MULTI_MSIX) {
+		if (nvec < n_ports)
+			return -ENODEV;
+		nvec = n_ports;
+	} else if (nvec) {
+		nvec = 1;
+	} else {
+		/*
+		 * Emit dev_err() since this was the non-legacy irq
+		 * method of last resort.
+		 */
 		rc = -ENODEV;
 		goto fail;
 	}
 
-	/*
-	 * There can be more than one vector (e.g. for error detection or
-	 * hdd hotplug). Only the first vector (entry.entry = 0) is used.
-	 */
-	rc = pci_enable_msix_exact(pdev, &entry, 1);
+	for (i = 0; i < nvec; i++)
+		hpriv->msix[i].entry = i;
+	rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec);
 	if (rc < 0)
 		goto fail;
 
-	hpriv->irq = entry.vector;
+	if (nvec > 1)
+		hpriv->flags |= AHCI_HFLAG_MULTI_MSIX;
+	hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */
 
-	return 1;
+	return nvec;
 fail:
 	dev_err(&pdev->dev,
 		"failed to enable MSI-X with error %d, # of vectors: %d\n",
@@ -1403,20 +1418,25 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
 {
 	int nvec;
 
+	/*
+	 * Try to enable per-port MSI-X.  If the host is not capable
+	 * fall back to single MSI before finally attempting single
+	 * MSI-X.
+	 */
+	nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX);
+	if (nvec >= 0)
+		return nvec;
+
 	nvec = ahci_init_msi(pdev, n_ports, hpriv);
 	if (nvec >= 0)
 		return nvec;
 
-	/*
-	 * Currently, MSI-X support only implements single IRQ mode and
-	 * exists for controllers which can't do other types of IRQ. Only
-	 * set it up if MSI fails.
-	 */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv);
+	/* try single-msix */
+	nvec = ahci_init_msix(pdev, n_ports, hpriv, 0);
 	if (nvec >= 0)
 		return nvec;
 
-	/* lagacy intx interrupts */
+	/* legacy intx interrupts */
 	pci_intx(pdev, 1);
 	hpriv->irq = pdev->irq;
 
@@ -1578,7 +1598,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!host)
 		return -ENOMEM;
 	host->private_data = hpriv;
-
+	hpriv->msix = devm_kzalloc(&pdev->dev,
+			sizeof(struct msix_entry) * n_ports, GFP_KERNEL);
+	if (!hpriv->msix)
+		return -ENOMEM;
 	ahci_init_interrupts(pdev, n_ports, hpriv);
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 45586c1..a4faa43 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -35,6 +35,7 @@
 #ifndef _AHCI_H
 #define _AHCI_H
 
+#include <linux/pci.h>
 #include <linux/clk.h>
 #include <linux/libata.h>
 #include <linux/phy/phy.h>
@@ -237,11 +238,18 @@ enum {
 	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
 						        port start (wait until
 						        error-handling stage) */
-	AHCI_HFLAG_MULTI_MSI		= (1 << 16), /* multiple PCI MSIs */
 	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
 	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
 	AHCI_HFLAG_EDGE_IRQ		= (1 << 19), /* HOST_IRQ_STAT behaves as
 							Edge Triggered */
+#ifdef CONFIG_PCI_MSI
+	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* multiple PCI MSIs */
+	AHCI_HFLAG_MULTI_MSIX		= (1 << 21), /* per-port MSI-X */
+#else
+	/* compile out MSI infrastructure */
+	AHCI_HFLAG_MULTI_MSI		= 0,
+	AHCI_HFLAG_MULTI_MSIX		= 0,
+#endif
 
 	/* ap->flags bits */
 
@@ -308,7 +316,6 @@ struct ahci_port_priv {
 	unsigned int		ncq_saw_d2h:1;
 	unsigned int		ncq_saw_dmas:1;
 	unsigned int		ncq_saw_sdb:1;
-	atomic_t		intr_status;	/* interrupts to handle */
 	spinlock_t		lock;		/* protects parent ata_port */
 	u32 			intr_mask;	/* interrupts to enable */
 	bool			fbs_supported;	/* set iff FBS is supported */
@@ -343,6 +350,7 @@ struct ahci_host_priv {
 	 * the PHY position in this array.
 	 */
 	struct phy		**phys;
+	struct msix_entry	*msix;		/* Optional MSI-X support */
 	unsigned		nports;		/* Number of ports */
 	void			*plat_data;	/* Other platform data */
 	unsigned int		irq;		/* interrupt line */
@@ -354,6 +362,21 @@ struct ahci_host_priv {
 	void			(*start_engine)(struct ata_port *ap);
 };
 
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+		return hpriv->msix[port].vector;
+	else
+		return hpriv->irq + port;
+}
+#else
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	return hpriv->irq;
+}
+#endif
+
 extern int ahci_ignore_sss;
 
 extern struct device_attribute *ahci_shost_attrs[];
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 14b7305..b36cae2 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -52,8 +52,10 @@
   #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET		BIT(14)
  #define SATA_TOP_CTRL_PHY_OFFS				0x8
  #define SATA_TOP_MAX_PHYS				2
-#define SATA_TOP_CTRL_SATA_TP_OUT			0x1c
-#define SATA_TOP_CTRL_CLIENT_INIT_CTRL			0x20
+
+#define SATA_FIRST_PORT_CTRL				0x700
+#define SATA_NEXT_PORT_CTRL_OFFSET			0x80
+#define SATA_PORT_PCTRL6(reg_base)			(reg_base + 0x18)
 
 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
@@ -69,14 +71,21 @@
 	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
 	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
 
+enum brcm_ahci_quirks {
+	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
+};
+
 struct brcm_ahci_priv {
 	struct device *dev;
 	void __iomem *top_ctrl;
 	u32 port_mask;
+	u32 quirks;
 };
 
 static const struct ata_port_info ahci_brcm_port_info = {
-	.flags		= AHCI_FLAG_COMMON,
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
+	.link_flags	= ATA_LFLAG_NO_DB_DELAY,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &ahci_platform_ops,
@@ -107,6 +116,34 @@ static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 		writel_relaxed(val, addr);
 }
 
+static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
+{
+	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	u32 bus_ctrl, port_ctrl, host_caps;
+	int i;
+
+	/* Enable support for ALPM */
+	bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
+				     SATA_TOP_CTRL_BUS_CTRL);
+	brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
+			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+	host_caps = readl(hpriv->mmio + HOST_CAP);
+	writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
+	brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+
+	/*
+	 * Adjust timeout to allow PLL sufficient time to lock while waking
+	 * up from slumber mode.
+	 */
+	for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
+	     i < SATA_TOP_MAX_PHYS;
+	     i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
+		if (priv->port_mask & BIT(i))
+			writel(0xff1003fc,
+			       hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
+	}
+}
+
 static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 {
 	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
@@ -114,6 +151,9 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 	void __iomem *p;
 	u32 reg;
 
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
 	/* clear PHY_DEFAULT_POWER_STATE */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 	reg = brcm_sata_readreg(p);
@@ -143,6 +183,9 @@ static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
 	void __iomem *p;
 	u32 reg;
 
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
 	/* power-off the PHY digital logic */
 	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 	reg = brcm_sata_readreg(p);
@@ -230,6 +273,7 @@ static int brcm_ahci_resume(struct device *dev)
 
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
+	brcm_sata_alpm_init(hpriv);
 	return ahci_platform_resume(dev);
 }
 #endif
@@ -256,6 +300,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
+	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
+		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+	}
+
 	brcm_sata_init(priv);
 
 	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
@@ -269,10 +318,15 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		return PTR_ERR(hpriv);
 	hpriv->plat_data = priv;
 
+	brcm_sata_alpm_init(hpriv);
+
 	ret = ahci_platform_enable_resources(hpriv);
 	if (ret)
 		return ret;
 
+	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
@@ -300,6 +354,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ahci_of_match[] = {
+	{.compatible = "brcm,bcm7425-ahci"},
 	{.compatible = "brcm,bcm7445-ahci"},
 	{},
 };
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index d0f9de9..7bdee9b 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -34,14 +34,20 @@
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
-#define AHCI_PORT_PHY_2_CFG	0x28183411
-#define AHCI_PORT_PHY_3_CFG	0x0e081004
-#define AHCI_PORT_PHY_4_CFG	0x00480811
-#define AHCI_PORT_PHY_5_CFG	0x192c96a4
-#define AHCI_PORT_TRANS_CFG	0x08000025
+#define AHCI_PORT_TRANS_CFG	0x08000029
+
+/* for ls1021a */
+#define LS1021A_PORT_PHY2	0x28183414
+#define LS1021A_PORT_PHY3	0x0e080e06
+#define LS1021A_PORT_PHY4	0x064a080b
+#define LS1021A_PORT_PHY5	0x2aa86470
 
 #define SATA_ECC_DISABLE	0x00020000
 
+/* for ls1043a */
+#define LS1043A_PORT_PHY2	0x28184d1f
+#define LS1043A_PORT_PHY3	0x0e081509
+
 enum ahci_qoriq_type {
 	AHCI_LS1021A,
 	AHCI_LS1043A,
@@ -151,16 +157,23 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 	case AHCI_LS1021A:
 		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
-		writel(AHCI_PORT_PHY_2_CFG, reg_base + PORT_PHY2);
-		writel(AHCI_PORT_PHY_3_CFG, reg_base + PORT_PHY3);
-		writel(AHCI_PORT_PHY_4_CFG, reg_base + PORT_PHY4);
-		writel(AHCI_PORT_PHY_5_CFG, reg_base + PORT_PHY5);
+		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
+		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
+		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
+		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		break;
 
 	case AHCI_LS1043A:
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(LS1043A_PORT_PHY2, reg_base + PORT_PHY2);
+		writel(LS1043A_PORT_PHY3, reg_base + PORT_PHY3);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		break;
+
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		break;
 	}
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 4665512..d61740e 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -43,6 +43,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
+#include <linux/pci.h>
 #include "ahci.h"
 #include "libata.h"
 
@@ -1804,41 +1805,24 @@ static void ahci_port_intr(struct ata_port *ap)
 	ahci_handle_port_interrupt(ap, port_mmio, status);
 }
 
-static irqreturn_t ahci_port_thread_fn(int irq, void *dev_instance)
+static irqreturn_t ahci_multi_irqs_intr_hard(int irq, void *dev_instance)
 {
 	struct ata_port *ap = dev_instance;
-	struct ahci_port_priv *pp = ap->private_data;
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 status;
 
-	status = atomic_xchg(&pp->intr_status, 0);
-	if (!status)
-		return IRQ_NONE;
-
-	spin_lock_bh(ap->lock);
-	ahci_handle_port_interrupt(ap, port_mmio, status);
-	spin_unlock_bh(ap->lock);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance)
-{
-	struct ata_port *ap = dev_instance;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 status;
-
 	VPRINTK("ENTER\n");
 
 	status = readl(port_mmio + PORT_IRQ_STAT);
 	writel(status, port_mmio + PORT_IRQ_STAT);
 
-	atomic_or(status, &pp->intr_status);
+	spin_lock(ap->lock);
+	ahci_handle_port_interrupt(ap, port_mmio, status);
+	spin_unlock(ap->lock);
 
 	VPRINTK("EXIT\n");
 
-	return IRQ_WAKE_THREAD;
+	return IRQ_HANDLED;
 }
 
 static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked)
@@ -2479,9 +2463,10 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv,
 }
 EXPORT_SYMBOL_GPL(ahci_set_em_messages);
 
-static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
+static int ahci_host_activate_multi_irqs(struct ata_host *host,
 					 struct scsi_host_template *sht)
 {
+	struct ahci_host_priv *hpriv = host->private_data;
 	int i, rc;
 
 	rc = ata_host_start(host);
@@ -2493,6 +2478,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
 	 */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
+		int irq = ahci_irq_vector(hpriv, i);
 
 		/* Do not receive interrupts sent by dummy ports */
 		if (!pp) {
@@ -2500,14 +2486,14 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
 			continue;
 		}
 
-		rc = devm_request_threaded_irq(host->dev, irq + i,
-					       ahci_multi_irqs_intr,
-					       ahci_port_thread_fn, 0,
-					       pp->irq_desc, host->ports[i]);
+		rc = devm_request_irq(host->dev, irq, ahci_multi_irqs_intr_hard,
+				0, pp->irq_desc, host->ports[i]);
+
 		if (rc)
 			return rc;
-		ata_port_desc(host->ports[i], "irq %d", irq + i);
+		ata_port_desc(host->ports[i], "irq %d", irq);
 	}
+
 	return ata_host_register(host, sht);
 }
 
@@ -2528,8 +2514,8 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
 	int irq = hpriv->irq;
 	int rc;
 
-	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
-		rc = ahci_host_activate_multi_irqs(host, irq, sht);
+	if (hpriv->flags & (AHCI_HFLAG_MULTI_MSI | AHCI_HFLAG_MULTI_MSIX))
+		rc = ahci_host_activate_multi_irqs(host, sht);
 	else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ)
 		rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr,
 				       IRQF_SHARED, sht);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b79cb10..cbb7471 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -50,6 +50,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
+#include <linux/time.h>
 #include <linux/interrupt.h>
 #include <linux/completion.h>
 #include <linux/suspend.h>
@@ -3597,7 +3598,8 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 		 * immediately after resuming.  Delay 200ms before
 		 * debouncing.
 		 */
-		ata_msleep(link->ap, 200);
+		if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
+			ata_msleep(link->ap, 200);
 
 		/* is SControl restored correctly? */
 		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
@@ -6223,6 +6225,7 @@ int ata_host_activate(struct ata_host *host, int irq,
 		      struct scsi_host_template *sht)
 {
 	int i, rc;
+	char *irq_desc;
 
 	rc = ata_host_start(host);
 	if (rc)
@@ -6234,8 +6237,14 @@ int ata_host_activate(struct ata_host *host, int irq,
 		return ata_host_register(host, sht);
 	}
 
+	irq_desc = devm_kasprintf(host->dev, GFP_KERNEL, "%s[%s]",
+				  dev_driver_string(host->dev),
+				  dev_name(host->dev));
+	if (!irq_desc)
+		return -ENOMEM;
+
 	rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
-			      dev_name(host->dev), host);
+			      irq_desc, host);
 	if (rc)
 		return rc;
 
@@ -6697,7 +6706,12 @@ void ata_msleep(struct ata_port *ap, unsigned int msecs)
 	if (owns_eh)
 		ata_eh_release(ap);
 
-	msleep(msecs);
+	if (msecs < 20) {
+		unsigned long usecs = msecs * USEC_PER_MSEC;
+		usleep_range(usecs, usecs + 50);
+	} else {
+		msleep(msecs);
+	}
 
 	if (owns_eh)
 		ata_eh_acquire(ap);
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 8804127..f72d601 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -854,17 +854,14 @@ static struct of_device_id sata_rcar_match[] = {
 		.compatible = "renesas,sata-r8a7793",
 		.data = (void *)RCAR_GEN2_SATA
 	},
+	{
+		.compatible = "renesas,sata-r8a7795",
+		.data = (void *)RCAR_GEN2_SATA
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sata_rcar_match);
 
-static const struct platform_device_id sata_rcar_id_table[] = {
-	{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
-	{ "sata-r8a7779", RCAR_GEN1_SATA },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
-
 static int sata_rcar_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
@@ -884,11 +881,10 @@ static int sata_rcar_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	of_id = of_match_device(sata_rcar_match, &pdev->dev);
-	if (of_id)
-		priv->type = (enum sata_rcar_type)of_id->data;
-	else
-		priv->type = platform_get_device_id(pdev)->driver_data;
+	if (!of_id)
+		return -ENODEV;
 
+	priv->type = (enum sata_rcar_type)of_id->data;
 	priv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		dev_err(&pdev->dev, "failed to get access to sata clock\n");
@@ -1018,7 +1014,6 @@ static const struct dev_pm_ops sata_rcar_pm_ops = {
 static struct platform_driver sata_rcar_driver = {
 	.probe		= sata_rcar_probe,
 	.remove		= sata_rcar_remove,
-	.id_table	= sata_rcar_id_table,
 	.driver = {
 		.name		= DRV_NAME,
 		.of_match_table	= sata_rcar_match,
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index fab504f..48301cb 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1396,6 +1396,8 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 		addr = 0;
 		length = size * 1024 * 1024;
 		buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL);
+		if (!buf)
+			return 1;
 		while (addr < length) {
 			pdc20621_put_to_dimm(host, buf, addr,
 					     ECC_ERASE_BUF_SZ);