[libata] Add pata_rdc driver for RDC ATA devices

From: Alan Cox <alan@linux.intel.com>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

3 files changed, 411 insertions, 0 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 8e64d3c..ab2fa4e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -597,6 +597,16 @@ config PATA_RB532
 
 	  If unsure, say N.
 
+config PATA_RDC
+	tristate "RDC PATA support"
+	depends on PCI
+	help
+	  This option enables basic support for the later RDC PATA controllers
+	  controllers via the new ATA layer. For the RDC 1010, you need to
+	  enable the IT821X driver instead.
+
+	  If unsure, say N.
+
 config PATA_RZ1000
 	tristate "PC Tech RZ1000 PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 38906f9..463eb52 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
 obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
+obj-$(CONFIG_PATA_RDC)		+= pata_rdc.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
 obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
new file mode 100644
index 0000000..c843a1e
--- /dev/null
+++ b/drivers/ata/pata_rdc.c
@@ -0,0 +1,400 @@
+/*
+ *  pata_rdc		-	Driver for later RDC PATA controllers
+ *
+ *  This is actually a driver for hardware meeting
+ *  INCITS 370-2004 (1510D): ATA Host Adapter Standards
+ *
+ *  Based on ata_piix.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME	"pata_rdc"
+#define DRV_VERSION	"0.01"
+
+struct rdc_host_priv {
+	u32 saved_iocfg;
+};
+
+/**
+ *	rdc_pata_cable_detect - Probe host controller cable detect info
+ *	@ap: Port for which cable detect info is desired
+ *
+ *	Read 80c cable indicator from ATA PCI device's PCI config
+ *	register.  This register is normally set by firmware (BIOS).
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static int rdc_pata_cable_detect(struct ata_port *ap)
+{
+	struct rdc_host_priv *hpriv = ap->host->private_data;
+	u8 mask;
+
+	/* check BIOS cable detect results */
+	mask = 0x30 << (2 * ap->port_no);
+	if ((hpriv->saved_iocfg & mask) == 0)
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	rdc_pata_prereset - prereset for PATA host controller
+ *	@link: Target link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	static const struct pci_bits rdc_enable_bits[] = {
+		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
+		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
+	};
+
+	if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
+		return -ENOENT;
+	return ata_sff_prereset(link, deadline);
+}
+
+/**
+ *	rdc_set_piomode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: um
+ *
+ *	Set PIO mode for device, in host controller PCI config space.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
+	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned int is_slave	= (adev->devno != 0);
+	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
+	unsigned int slave_port	= 0x44;
+	u16 master_data;
+	u8 slave_data;
+	u8 udma_enable;
+	int control = 0;
+
+	static const	 /* ISP  RTC */
+	u8 timings[][2]	= { { 0, 0 },
+			    { 0, 0 },
+			    { 1, 0 },
+			    { 2, 1 },
+			    { 2, 3 }, };
+
+	if (pio >= 2)
+		control |= 1;	/* TIME1 enable */
+	if (ata_pio_need_iordy(adev))
+		control |= 2;	/* IE enable */
+
+	if (adev->class == ATA_DEV_ATA)
+		control |= 4;	/* PPE enable */
+
+	/* PIO configuration clears DTE unconditionally.  It will be
+	 * programmed in set_dmamode which is guaranteed to be called
+	 * after set_piomode if any DMA mode is available.
+	 */
+	pci_read_config_word(dev, master_port, &master_data);
+	if (is_slave) {
+		/* clear TIME1|IE1|PPE1|DTE1 */
+		master_data &= 0xff0f;
+		/* Enable SITRE (separate slave timing register) */
+		master_data |= 0x4000;
+		/* enable PPE1, IE1 and TIME1 as needed */
+		master_data |= (control << 4);
+		pci_read_config_byte(dev, slave_port, &slave_data);
+		slave_data &= (ap->port_no ? 0x0f : 0xf0);
+		/* Load the timing nibble for this slave */
+		slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
+						<< (ap->port_no ? 4 : 0);
+	} else {
+		/* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
+		master_data &= 0xccf0;
+		/* Enable PPE, IE and TIME as appropriate */
+		master_data |= control;
+		/* load ISP and RCT */
+		master_data |=
+			(timings[pio][0] << 12) |
+			(timings[pio][1] << 8);
+	}
+	pci_write_config_word(dev, master_port, master_data);
+	if (is_slave)
+		pci_write_config_byte(dev, slave_port, slave_data);
+
+	/* Ensure the UDMA bit is off - it will be turned back on if
+	   UDMA is selected */
+
+	pci_read_config_byte(dev, 0x48, &udma_enable);
+	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
+	pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+/**
+ *	rdc_set_dmamode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: Drive in question
+ *
+ *	Set UDMA mode for device, in host controller PCI config space.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	u8 master_port		= ap->port_no ? 0x42 : 0x40;
+	u16 master_data;
+	u8 speed		= adev->dma_mode;
+	int devid		= adev->devno + 2 * ap->port_no;
+	u8 udma_enable		= 0;
+
+	static const	 /* ISP  RTC */
+	u8 timings[][2]	= { { 0, 0 },
+			    { 0, 0 },
+			    { 1, 0 },
+			    { 2, 1 },
+			    { 2, 3 }, };
+
+	pci_read_config_word(dev, master_port, &master_data);
+	pci_read_config_byte(dev, 0x48, &udma_enable);
+
+	if (speed >= XFER_UDMA_0) {
+		unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+		u16 udma_timing;
+		u16 ideconf;
+		int u_clock, u_speed;
+
+		/*
+		 * UDMA is handled by a combination of clock switching and
+		 * selection of dividers
+		 *
+		 * Handy rule: Odd modes are UDMATIMx 01, even are 02
+		 *	       except UDMA0 which is 00
+		 */
+		u_speed = min(2 - (udma & 1), udma);
+		if (udma == 5)
+			u_clock = 0x1000;	/* 100Mhz */
+		else if (udma > 2)
+			u_clock = 1;		/* 66Mhz */
+		else
+			u_clock = 0;		/* 33Mhz */
+
+		udma_enable |= (1 << devid);
+
+		/* Load the CT/RP selection */
+		pci_read_config_word(dev, 0x4A, &udma_timing);
+		udma_timing &= ~(3 << (4 * devid));
+		udma_timing |= u_speed << (4 * devid);
+		pci_write_config_word(dev, 0x4A, udma_timing);
+
+		/* Select a 33/66/100Mhz clock */
+		pci_read_config_word(dev, 0x54, &ideconf);
+		ideconf &= ~(0x1001 << devid);
+		ideconf |= u_clock << devid;
+		pci_write_config_word(dev, 0x54, ideconf);
+	} else {
+		/*
+		 * MWDMA is driven by the PIO timings. We must also enable
+		 * IORDY unconditionally along with TIME1. PPE has already
+		 * been set when the PIO timing was set.
+		 */
+		unsigned int mwdma	= adev->dma_mode - XFER_MW_DMA_0;
+		unsigned int control;
+		u8 slave_data;
+		const unsigned int needed_pio[3] = {
+			XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+		};
+		int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+		control = 3;	/* IORDY|TIME1 */
+
+		/* If the drive MWDMA is faster than it can do PIO then
+		   we must force PIO into PIO0 */
+
+		if (adev->pio_mode < needed_pio[mwdma])
+			/* Enable DMA timing only */
+			control |= 8;	/* PIO cycles in PIO0 */
+
+		if (adev->devno) {	/* Slave */
+			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
+			master_data |= control << 4;
+			pci_read_config_byte(dev, 0x44, &slave_data);
+			slave_data &= (ap->port_no ? 0x0f : 0xf0);
+			/* Load the matching timing */
+			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+			pci_write_config_byte(dev, 0x44, slave_data);
+		} else { 	/* Master */
+			master_data &= 0xCCF4;	/* Mask out IORDY|TIME1|DMAONLY
+						   and master timing bits */
+			master_data |= control;
+			master_data |=
+				(timings[pio][0] << 12) |
+				(timings[pio][1] << 8);
+		}
+
+		udma_enable &= ~(1 << devid);
+		pci_write_config_word(dev, master_port, master_data);
+	}
+	pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+static struct ata_port_operations rdc_pata_ops = {
+	.inherits		= &ata_bmdma32_port_ops,
+	.cable_detect		= rdc_pata_cable_detect,
+	.set_piomode		= rdc_set_piomode,
+	.set_dmamode		= rdc_set_dmamode,
+	.prereset		= rdc_pata_prereset,
+};
+
+static struct ata_port_info rdc_port_info = {
+
+	.flags		= ATA_FLAG_SLAVE_POSS,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
+	.port_ops	= &rdc_pata_ops,
+};
+
+static struct scsi_host_template rdc_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+/**
+ *	rdc_init_one - Register PIIX ATA PCI device with kernel services
+ *	@pdev: PCI device to register
+ *	@ent: Entry in rdc_pci_tbl matching with @pdev
+ *
+ *	Called from kernel PCI layer.  We probe for combined mode (sigh),
+ *	and then hand over control to libata, for it to do the rest.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, or -ERRNO value.
+ */
+
+static int __devinit rdc_init_one(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	static int printed_version;
+	struct device *dev = &pdev->dev;
+	struct ata_port_info port_info[2];
+	const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
+	unsigned long port_flags;
+	struct ata_host *host;
+	struct rdc_host_priv *hpriv;
+	int rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "version " DRV_VERSION "\n");
+
+	port_info[0] = rdc_port_info;
+	port_info[1] = rdc_port_info;
+
+	port_flags = port_info[0].flags;
+
+	/* enable device and prepare host */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv)
+		return -ENOMEM;
+
+	/* Save IOCFG, this will be used for cable detection, quirk
+	 * detection and restoration on detach.
+	 */
+	pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
+
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	if (rc)
+		return rc;
+	host->private_data = hpriv;
+
+	pci_intx(pdev, 1);
+
+	host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+	pci_set_master(pdev);
+	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+}
+
+static void rdc_remove_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct rdc_host_priv *hpriv = host->private_data;
+
+	pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
+
+	ata_pci_remove_one(pdev);
+}
+
+static const struct pci_device_id rdc_pci_tbl[] = {
+	{ PCI_DEVICE(0x17F3, 0x1011), },
+	{ PCI_DEVICE(0x17F3, 0x1012), },
+	{ }	/* terminate list */
+};
+
+static struct pci_driver rdc_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= rdc_pci_tbl,
+	.probe			= rdc_init_one,
+	.remove			= rdc_remove_one,
+};
+
+
+static int __init rdc_init(void)
+{
+	return pci_register_driver(&rdc_pci_driver);
+}
+
+static void __exit rdc_exit(void)
+{
+	pci_unregister_driver(&rdc_pci_driver);
+}
+
+module_init(rdc_init);
+module_exit(rdc_exit);
+
+MODULE_AUTHOR("Alan Cox (based on ata_piix)");
+MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
+MODULE_VERSION(DRV_VERSION);