summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
authorMark Lord <liml@rtr.ca>2008-04-19 15:07:49 -0400
committerJeff Garzik <jgarzik@redhat.com>2008-04-25 01:26:14 -0400
commit8d07379d251ab24d937e6cb0748b71106dddbc74 (patch)
tree4c8388db13465e9c9a523114189cfdbc1d2830c1 /drivers/ata
parent8f767f8a02e6c65d393fd0f2ca19a91c9898cc2d (diff)
downloadop-kernel-dev-8d07379d251ab24d937e6cb0748b71106dddbc74.zip
op-kernel-dev-8d07379d251ab24d937e6cb0748b71106dddbc74.tar.gz
sata_mv: leave SError bits untouched in mv_err_intr
Here it is again, minus the checkpatch.pl complaint: Rework mv_err_intr() to leave the SError bits as-is, so that libata-eh has a chance to see/use them. We originally thought that clearing them here was necessary before writing back to edma_err_cause (per the Marvell datasheets), but we will end up reseting the chip regardless in those cases. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/sata_mv.c40
1 files changed, 19 insertions, 21 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9443592..4fa5480 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1523,13 +1523,11 @@ static void mv_unexpected_intr(struct ata_port *ap)
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
- * @reset_allowed: bool: 0 == don't trigger from reset here
+ * @qc: affected command (non-NCQ), or NULL
*
- * In most cases, just clear the interrupt and move on. However,
- * some cases require an eDMA reset, which also performs a COMRESET.
- * The SERR case requires a clear of pending errors in the SATA
- * SERROR register. Finally, if the port disabled DMA,
- * update our cached copy to match.
+ * Most cases require a full reset of the chip's state machine,
+ * which also performs a COMRESET.
+ * Also, if the port disabled DMA, update our cached copy to match.
*
* LOCKING:
* Inherited from caller.
@@ -1540,21 +1538,18 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
u32 edma_err_cause, eh_freeze_mask, serr = 0;
struct mv_port_priv *pp = ap->private_data;
struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
unsigned int action = 0, err_mask = 0;
struct ata_eh_info *ehi = &ap->link.eh_info;
ata_ehi_clear_desc(ehi);
- if (!edma_enabled) {
- /* just a guess: do we need to do this? should we
- * expand this, and do it in all cases?
- */
- sata_scr_read(&ap->link, SCR_ERROR, &serr);
- sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
- }
-
+ /*
+ * Read and clear the err_cause bits. This won't actually
+ * clear for some errors (eg. SError), but we will be doing
+ * a hard reset in those cases regardless, which *will* clear it.
+ */
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
ata_ehi_push_desc(ehi, "edma_err_cause=%08x", edma_err_cause);
@@ -1594,16 +1589,19 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
ata_ehi_push_desc(ehi, "EDMA self-disable");
}
if (edma_err_cause & EDMA_ERR_SERR) {
- sata_scr_read(&ap->link, SCR_ERROR, &serr);
- sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
- err_mask = AC_ERR_ATA_BUS;
+ /*
+ * Ensure that we read our own SCR, not a pmp link SCR:
+ */
+ ap->ops->scr_read(ap, SCR_ERROR, &serr);
+ /*
+ * Don't clear SError here; leave it for libata-eh:
+ */
+ ata_ehi_push_desc(ehi, "SError=%08x", serr);
+ err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_RESET;
}
}
- /* Clear EDMA now that SERR cleanup done */
- writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
-
if (!err_mask) {
err_mask = AC_ERR_OTHER;
action |= ATA_EH_RESET;
OpenPOWER on IntegriCloud